These changes are the raw update to linux-4.4.6-rt14. Kernel sources

are taken from kernel.org, and rt patch from the rt wiki download page.

During the rebasing, the following patch collided:

Force tick interrupt and get rid of softirq magic(I70131fb85).

Collisions have been removed because its logic was found on the
source already.

Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>

1 files changed, 220 insertions, 48 deletions

diff --git a/kernel/drivers/pci/probe.c b/kernel/drivers/pci/probe.c
index c91185721..edb198420 100644
--- a/kernel/drivers/pci/probe.c
+++ b/kernel/drivers/pci/probe.c
@@ -6,12 +6,15 @@
 #include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/pci.h>
+#include <linux/of_device.h>
 #include <linux/of_pci.h>
 #include <linux/pci_hotplug.h>
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/cpumask.h>
 #include <linux/pci-aspm.h>
+#include <linux/aer.h>
+#include <linux/acpi.h>
 #include <asm-generic/pci-bridge.h>
 #include "pci.h"
 
@@ -326,8 +329,7 @@ static void pci_read_bases(struct pci_dev *dev, unsigned int howmany, int rom)
 		struct resource *res = &dev->resource[PCI_ROM_RESOURCE];
 		dev->rom_base_reg = rom;
 		res->flags = IORESOURCE_MEM | IORESOURCE_PREFETCH |
-				IORESOURCE_READONLY | IORESOURCE_CACHEABLE |
-				IORESOURCE_SIZEALIGN;
+				IORESOURCE_READONLY | IORESOURCE_SIZEALIGN;
 		__pci_read_base(dev, pci_bar_mem32, res, rom);
 	}
 }
@@ -661,6 +663,40 @@ static void pci_set_bus_speed(struct pci_bus *bus)
 	}
 }
 
+static struct irq_domain *pci_host_bridge_msi_domain(struct pci_bus *bus)
+{
+	struct irq_domain *d;
+
+	/*
+	 * Any firmware interface that can resolve the msi_domain
+	 * should be called from here.
+	 */
+	d = pci_host_bridge_of_msi_domain(bus);
+
+	return d;
+}
+
+static void pci_set_bus_msi_domain(struct pci_bus *bus)
+{
+	struct irq_domain *d;
+	struct pci_bus *b;
+
+	/*
+	 * The bus can be a root bus, a subordinate bus, or a virtual bus
+	 * created by an SR-IOV device.  Walk up to the first bridge device
+	 * found or derive the domain from the host bridge.
+	 */
+	for (b = bus, d = NULL; !d && !pci_is_root_bus(b); b = b->parent) {
+		if (b->self)
+			d = dev_get_msi_domain(&b->self->dev);
+	}
+
+	if (!d)
+		d = pci_host_bridge_msi_domain(b);
+
+	dev_set_msi_domain(&bus->dev, d);
+}
+
 static struct pci_bus *pci_alloc_child_bus(struct pci_bus *parent,
 					   struct pci_dev *bridge, int busnr)
 {
@@ -714,6 +750,7 @@ static struct pci_bus *pci_alloc_child_bus(struct pci_bus *parent,
 	bridge->subordinate = child;
 
 add_dev:
+	pci_set_bus_msi_domain(child);
 	ret = device_register(&child->dev);
 	WARN_ON(ret < 0);
 
@@ -973,6 +1010,8 @@ void set_pcie_port_type(struct pci_dev *pdev)
 {
 	int pos;
 	u16 reg16;
+	int type;
+	struct pci_dev *parent;
 
 	pos = pci_find_capability(pdev, PCI_CAP_ID_EXP);
 	if (!pos)
@@ -982,6 +1021,27 @@ void set_pcie_port_type(struct pci_dev *pdev)
 	pdev->pcie_flags_reg = reg16;
 	pci_read_config_word(pdev, pos + PCI_EXP_DEVCAP, &reg16);
 	pdev->pcie_mpss = reg16 & PCI_EXP_DEVCAP_PAYLOAD;
+
+	/*
+	 * A Root Port is always the upstream end of a Link.  No PCIe
+	 * component has two Links.  Two Links are connected by a Switch
+	 * that has a Port on each Link and internal logic to connect the
+	 * two Ports.
+	 */
+	type = pci_pcie_type(pdev);
+	if (type == PCI_EXP_TYPE_ROOT_PORT)
+		pdev->has_secondary_link = 1;
+	else if (type == PCI_EXP_TYPE_UPSTREAM ||
+		 type == PCI_EXP_TYPE_DOWNSTREAM) {
+		parent = pci_upstream_bridge(pdev);
+
+		/*
+		 * Usually there's an upstream device (Root Port or Switch
+		 * Downstream Port), but we can't assume one exists.
+		 */
+		if (parent && !parent->has_secondary_link)
+			pdev->has_secondary_link = 1;
+	}
 }
 
 void set_pcie_hotplug_bridge(struct pci_dev *pdev)
@@ -1085,6 +1145,22 @@ int pci_cfg_space_size(struct pci_dev *dev)
 
 #define LEGACY_IO_RESOURCE	(IORESOURCE_IO | IORESOURCE_PCI_FIXED)
 
+void pci_msi_setup_pci_dev(struct pci_dev *dev)
+{
+	/*
+	 * Disable the MSI hardware to avoid screaming interrupts
+	 * during boot.  This is the power on reset default so
+	 * usually this should be a noop.
+	 */
+	dev->msi_cap = pci_find_capability(dev, PCI_CAP_ID_MSI);
+	if (dev->msi_cap)
+		pci_msi_set_enable(dev, 0);
+
+	dev->msix_cap = pci_find_capability(dev, PCI_CAP_ID_MSIX);
+	if (dev->msix_cap)
+		pci_msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_ENABLE, 0);
+}
+
 /**
  * pci_setup_device - fill in class and map information of a device
  * @dev: the device structure to fill
@@ -1099,7 +1175,6 @@ int pci_setup_device(struct pci_dev *dev)
 {
 	u32 class;
 	u8 hdr_type;
-	struct pci_slot *slot;
 	int pos = 0;
 	struct pci_bus_region region;
 	struct resource *res;
@@ -1115,10 +1190,7 @@ int pci_setup_device(struct pci_dev *dev)
 	dev->error_state = pci_channel_io_normal;
 	set_pcie_port_type(dev);
 
-	list_for_each_entry(slot, &dev->bus->slots, list)
-		if (PCI_SLOT(dev->devfn) == slot->number)
-			dev->slot = slot;
-
+	pci_dev_assign_slot(dev);
 	/* Assume 32-bit PCI; let 64-bit PCI cards (which are far rarer)
 	   set this higher, assuming the system even supports it.  */
 	dev->dma_mask = 0xffffffff;
@@ -1140,6 +1212,8 @@ int pci_setup_device(struct pci_dev *dev)
 	/* "Unknown power state" */
 	dev->current_state = PCI_UNKNOWN;
 
+	pci_msi_setup_pci_dev(dev);
+
 	/* Early fixups, before probing the BARs */
 	pci_fixup_device(pci_fixup_early, dev);
 	/* device class may be changed after fixup */
@@ -1232,13 +1306,51 @@ int pci_setup_device(struct pci_dev *dev)
 	bad:
 		dev_err(&dev->dev, "ignoring class %#08x (doesn't match header type %02x)\n",
 			dev->class, dev->hdr_type);
-		dev->class = PCI_CLASS_NOT_DEFINED;
+		dev->class = PCI_CLASS_NOT_DEFINED << 8;
 	}
 
 	/* We found a fine healthy device, go go go... */
 	return 0;
 }
 
+static void pci_configure_mps(struct pci_dev *dev)
+{
+	struct pci_dev *bridge = pci_upstream_bridge(dev);
+	int mps, p_mps, rc;
+
+	if (!pci_is_pcie(dev) || !bridge || !pci_is_pcie(bridge))
+		return;
+
+	mps = pcie_get_mps(dev);
+	p_mps = pcie_get_mps(bridge);
+
+	if (mps == p_mps)
+		return;
+
+	if (pcie_bus_config == PCIE_BUS_TUNE_OFF) {
+		dev_warn(&dev->dev, "Max Payload Size %d, but upstream %s set to %d; if necessary, use \"pci=pcie_bus_safe\" and report a bug\n",
+			 mps, pci_name(bridge), p_mps);
+		return;
+	}
+
+	/*
+	 * Fancier MPS configuration is done later by
+	 * pcie_bus_configure_settings()
+	 */
+	if (pcie_bus_config != PCIE_BUS_DEFAULT)
+		return;
+
+	rc = pcie_set_mps(dev, p_mps);
+	if (rc) {
+		dev_warn(&dev->dev, "can't set Max Payload Size to %d; if necessary, use \"pci=pcie_bus_safe\" and report a bug\n",
+			 p_mps);
+		return;
+	}
+
+	dev_info(&dev->dev, "Max Payload Size set to %d (was %d, max %d)\n",
+		 p_mps, mps, 128 << dev->pcie_mpss);
+}
+
 static struct hpp_type0 pci_default_type0 = {
 	.revision = 1,
 	.cache_line_size = 8,
@@ -1360,6 +1472,8 @@ static void pci_configure_device(struct pci_dev *dev)
 	struct hotplug_params hpp;
 	int ret;
 
+	pci_configure_mps(dev);
+
 	memset(&hpp, 0, sizeof(hpp));
 	ret = pci_get_hp_params(dev, &hpp);
 	if (ret)
@@ -1486,6 +1600,9 @@ static struct pci_dev *pci_scan_device(struct pci_bus *bus, int devfn)
 
 static void pci_init_capabilities(struct pci_dev *dev)
 {
+	/* Enhanced Allocation */
+	pci_ea_init(dev);
+
 	/* MSI/MSI-X list */
 	pci_msi_init_pci_dev(dev);
 
@@ -1504,8 +1621,85 @@ static void pci_init_capabilities(struct pci_dev *dev)
 	/* Single Root I/O Virtualization */
 	pci_iov_init(dev);
 
+	/* Address Translation Services */
+	pci_ats_init(dev);
+
 	/* Enable ACS P2P upstream forwarding */
 	pci_enable_acs(dev);
+
+	pci_cleanup_aer_error_status_regs(dev);
+}
+
+/*
+ * This is the equivalent of pci_host_bridge_msi_domain that acts on
+ * devices. Firmware interfaces that can select the MSI domain on a
+ * per-device basis should be called from here.
+ */
+static struct irq_domain *pci_dev_msi_domain(struct pci_dev *dev)
+{
+	struct irq_domain *d;
+
+	/*
+	 * If a domain has been set through the pcibios_add_device
+	 * callback, then this is the one (platform code knows best).
+	 */
+	d = dev_get_msi_domain(&dev->dev);
+	if (d)
+		return d;
+
+	/*
+	 * Let's see if we have a firmware interface able to provide
+	 * the domain.
+	 */
+	d = pci_msi_get_device_domain(dev);
+	if (d)
+		return d;
+
+	return NULL;
+}
+
+static void pci_set_msi_domain(struct pci_dev *dev)
+{
+	struct irq_domain *d;
+
+	/*
+	 * If the platform or firmware interfaces cannot supply a
+	 * device-specific MSI domain, then inherit the default domain
+	 * from the host bridge itself.
+	 */
+	d = pci_dev_msi_domain(dev);
+	if (!d)
+		d = dev_get_msi_domain(&dev->bus->dev);
+
+	dev_set_msi_domain(&dev->dev, d);
+}
+
+/**
+ * pci_dma_configure - Setup DMA configuration
+ * @dev: ptr to pci_dev struct of the PCI device
+ *
+ * Function to update PCI devices's DMA configuration using the same
+ * info from the OF node or ACPI node of host bridge's parent (if any).
+ */
+static void pci_dma_configure(struct pci_dev *dev)
+{
+	struct device *bridge = pci_get_host_bridge_device(dev);
+
+	if (IS_ENABLED(CONFIG_OF) &&
+		bridge->parent && bridge->parent->of_node) {
+			of_dma_configure(&dev->dev, bridge->parent->of_node);
+	} else if (has_acpi_companion(bridge)) {
+		struct acpi_device *adev = to_acpi_device_node(bridge->fwnode);
+		enum dev_dma_attr attr = acpi_get_dma_attr(adev);
+
+		if (attr == DEV_DMA_NOT_SUPPORTED)
+			dev_warn(&dev->dev, "DMA not supported.\n");
+		else
+			arch_setup_dma_ops(&dev->dev, 0, 0, NULL,
+					   attr == DEV_DMA_COHERENT);
+	}
+
+	pci_put_host_bridge_device(bridge);
 }
 
 void pci_device_add(struct pci_dev *dev, struct pci_bus *bus)
@@ -1521,7 +1715,7 @@ void pci_device_add(struct pci_dev *dev, struct pci_bus *bus)
 	dev->dev.dma_mask = &dev->dma_mask;
 	dev->dev.dma_parms = &dev->dma_parms;
 	dev->dev.coherent_dma_mask = 0xffffffffull;
-	of_pci_dma_configure(dev);
+	pci_dma_configure(dev);
 
 	pci_set_dma_max_seg_size(dev, 65536);
 	pci_set_dma_seg_boundary(dev, 0xffffffff);
@@ -1549,6 +1743,9 @@ void pci_device_add(struct pci_dev *dev, struct pci_bus *bus)
 	ret = pcibios_add_device(dev);
 	WARN_ON(ret < 0);
 
+	/* Setup MSI irq domain */
+	pci_set_msi_domain(dev);
+
 	/* Notifier could use PCI capabilities */
 	dev->match_driver = false;
 	ret = device_add(&dev->dev);
@@ -1611,7 +1808,7 @@ static int only_one_child(struct pci_bus *bus)
 		return 0;
 	if (pci_pcie_type(parent) == PCI_EXP_TYPE_ROOT_PORT)
 		return 1;
-	if (pci_pcie_type(parent) == PCI_EXP_TYPE_DOWNSTREAM &&
+	if (parent->has_secondary_link &&
 	    !pci_has_flag(PCI_SCAN_ALL_PCIE_DEVS))
 		return 1;
 	return 0;
@@ -1755,22 +1952,6 @@ static void pcie_write_mrrs(struct pci_dev *dev)
 		dev_err(&dev->dev, "MRRS was unable to be configured with a safe value.  If problems are experienced, try running with pci=pcie_bus_safe\n");
 }
 
-static void pcie_bus_detect_mps(struct pci_dev *dev)
-{
-	struct pci_dev *bridge = dev->bus->self;
-	int mps, p_mps;
-
-	if (!bridge)
-		return;
-
-	mps = pcie_get_mps(dev);
-	p_mps = pcie_get_mps(bridge);
-
-	if (mps != p_mps)
-		dev_warn(&dev->dev, "Max Payload Size %d, but upstream %s set to %d; if necessary, use \"pci=pcie_bus_safe\" and report a bug\n",
-			 mps, pci_name(bridge), p_mps);
-}
-
 static int pcie_bus_configure_set(struct pci_dev *dev, void *data)
 {
 	int mps, orig_mps;
@@ -1778,10 +1959,9 @@ static int pcie_bus_configure_set(struct pci_dev *dev, void *data)
 	if (!pci_is_pcie(dev))
 		return 0;
 
-	if (pcie_bus_config == PCIE_BUS_TUNE_OFF) {
-		pcie_bus_detect_mps(dev);
+	if (pcie_bus_config == PCIE_BUS_TUNE_OFF ||
+	    pcie_bus_config == PCIE_BUS_DEFAULT)
 		return 0;
-	}
 
 	mps = 128 << *(u8 *)data;
 	orig_mps = pcie_get_mps(dev);
@@ -1939,6 +2119,7 @@ struct pci_bus *pci_create_root_bus(struct device *parent, int bus,
 	b->bridge = get_device(&bridge->dev);
 	device_enable_async_suspend(b->bridge);
 	pci_set_bus_of_node(b);
+	pci_set_bus_msi_domain(b);
 
 	if (!parent)
 		set_dev_node(b->bridge, pcibus_to_node(b));
@@ -2060,8 +2241,9 @@ void pci_bus_release_busn_res(struct pci_bus *b)
 			res, ret ? "can not be" : "is");
 }
 
-struct pci_bus *pci_scan_root_bus(struct device *parent, int bus,
-		struct pci_ops *ops, void *sysdata, struct list_head *resources)
+struct pci_bus *pci_scan_root_bus_msi(struct device *parent, int bus,
+		struct pci_ops *ops, void *sysdata,
+		struct list_head *resources, struct msi_controller *msi)
 {
 	struct resource_entry *window;
 	bool found = false;
@@ -2078,6 +2260,8 @@ struct pci_bus *pci_scan_root_bus(struct device *parent, int bus,
 	if (!b)
 		return NULL;
 
+	b->msi = msi;
+
 	if (!found) {
 		dev_info(&b->dev,
 		 "No busn resource found for root bus, will use [bus %02x-ff]\n",
@@ -2092,26 +2276,14 @@ struct pci_bus *pci_scan_root_bus(struct device *parent, int bus,
 
 	return b;
 }
-EXPORT_SYMBOL(pci_scan_root_bus);
 
-/* Deprecated; use pci_scan_root_bus() instead */
-struct pci_bus *pci_scan_bus_parented(struct device *parent,
-		int bus, struct pci_ops *ops, void *sysdata)
+struct pci_bus *pci_scan_root_bus(struct device *parent, int bus,
+		struct pci_ops *ops, void *sysdata, struct list_head *resources)
 {
-	LIST_HEAD(resources);
-	struct pci_bus *b;
-
-	pci_add_resource(&resources, &ioport_resource);
-	pci_add_resource(&resources, &iomem_resource);
-	pci_add_resource(&resources, &busn_resource);
-	b = pci_create_root_bus(parent, bus, ops, sysdata, &resources);
-	if (b)
-		pci_scan_child_bus(b);
-	else
-		pci_free_resource_list(&resources);
-	return b;
+	return pci_scan_root_bus_msi(parent, bus, ops, sysdata, resources,
+				     NULL);
 }
-EXPORT_SYMBOL(pci_scan_bus_parented);
+EXPORT_SYMBOL(pci_scan_root_bus);
 
 struct pci_bus *pci_scan_bus(int bus, struct pci_ops *ops,
 					void *sysdata)