Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

1 files changed, 340 insertions, 0 deletions

diff --git a/kernel/drivers/net/wireless/rtlwifi/rtl8192ee/pwrseq.h b/kernel/drivers/net/wireless/rtlwifi/rtl8192ee/pwrseq.h
new file mode 100644
index 000000000..781eeaa6a
--- /dev/null
+++ b/kernel/drivers/net/wireless/rtlwifi/rtl8192ee/pwrseq.h
@@ -0,0 +1,340 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2014  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#ifndef __RTL92E_PWRSEQ_H__
+#define __RTL92E_PWRSEQ_H__
+
+#include "../pwrseqcmd.h"
+/**
+ *	Check document WM-20110607-Paul-RTL8192E_Power_Architecture-R02.vsd
+ *	There are 6 HW Power States:
+ *	0: POFF--Power Off
+ *	1: PDN--Power Down
+ *	2: CARDEMU--Card Emulation
+ *	3: ACT--Active Mode
+ *	4: LPS--Low Power State
+ *	5: SUS--Suspend
+ *
+ *	The transision from different states are defined below
+ *	TRANS_CARDEMU_TO_ACT
+ *	TRANS_ACT_TO_CARDEMU
+ *	TRANS_CARDEMU_TO_SUS
+ *	TRANS_SUS_TO_CARDEMU
+ *	TRANS_CARDEMU_TO_PDN
+ *	TRANS_ACT_TO_LPS
+ *	TRANS_LPS_TO_ACT
+ *
+ *	TRANS_END
+ *	PWR SEQ Version: rtl8192E_PwrSeq_V09.h
+ */
+
+#define	RTL8192E_TRANS_CARDEMU_TO_ACT_STEPS	18
+#define	RTL8192E_TRANS_ACT_TO_CARDEMU_STEPS	18
+#define	RTL8192E_TRANS_CARDEMU_TO_SUS_STEPS	18
+#define	RTL8192E_TRANS_SUS_TO_CARDEMU_STEPS	18
+#define	RTL8192E_TRANS_CARDEMU_TO_PDN_STEPS	18
+#define	RTL8192E_TRANS_PDN_TO_CARDEMU_STEPS	18
+#define	RTL8192E_TRANS_ACT_TO_LPS_STEPS		23
+#define	RTL8192E_TRANS_LPS_TO_ACT_STEPS		23
+#define	RTL8192E_TRANS_END_STEPS		1
+
+#define RTL8192E_TRANS_CARDEMU_TO_ACT					\
+	/* format */							\
+	/* comments here */						\
+	/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
+	/* disable HWPDN 0x04[15]=0*/					\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(7), 0},			\
+	/* disable SW LPS 0x04[10]=0*/					\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(2), 0},			\
+	/* disable WL suspend*/						\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, (BIT(4)|BIT(3)), 0},		\
+	/* wait till 0x04[17] = 1    power ready*/			\
+	{0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_POLLING, BIT(1), BIT(1)},		\
+	/* release WLON reset  0x04[16]=1*/				\
+	{0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(0), BIT(0)},		\
+	/* polling until return 0*/					\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(0), BIT(0)},		\
+	/**/								\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_POLLING, BIT(0), 0},
+
+#define RTL8192E_TRANS_ACT_TO_CARDEMU					\
+	/* format */							\
+	/* comments here */						\
+	/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
+	/*0x1F[7:0] = 0 turn off RF*/					\
+	{0x001F, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, 0xFF, 0},			\
+	/*0x4C[23]=0x4E[7]=0, switch DPDT_SEL_P output from register 0x65[2] */\
+	{0x004E, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(7), 0},			\
+	/*0x04[9] = 1 turn off MAC by HW state machine*/		\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(1), BIT(1)},		\
+	/*wait till 0x04[9] = 0 polling until return 0 to disable*/	\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_POLLING, BIT(1), 0},
+
+#define RTL8192E_TRANS_CARDEMU_TO_SUS					\
+	/* format */							\
+	/* comments here */						\
+	/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
+	/*0x04[12:11] = 2b'11 enable WL suspend for PCIe*/		\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(4) | BIT(3), (BIT(4) | BIT(3))},\
+	/*0x04[12:11] = 2b'01 enable WL suspend*/			\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,			\
+	 PWR_INTF_USB_MSK | PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC,	\
+	 PWR_CMD_WRITE, BIT(3)|BIT(4), BIT(3)},				\
+	/*0x04[12:11] = 2b'11 enable WL suspend for PCIe*/		\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(3) | BIT(4), BIT(3) | BIT(4)},\
+	/*Set SDIO suspend local register*/				\
+	{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	 PWR_BASEADDR_SDIO , PWR_CMD_WRITE, BIT(0), BIT(0)},		\
+	 /*wait power state to suspend*/				\
+	{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	 PWR_BASEADDR_SDIO , PWR_CMD_POLLING, BIT(1), 0},
+
+#define RTL8192E_TRANS_SUS_TO_CARDEMU					\
+	/* format */							\
+	/* comments here */						\
+	/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
+	/*Set SDIO suspend local register*/				\
+	{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	 PWR_BASEADDR_SDIO , PWR_CMD_WRITE, BIT(0), 0},			\
+	/*wait power state to suspend*/					\
+	{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	 PWR_BASEADDR_SDIO , PWR_CMD_POLLING, BIT(1), BIT(1)},		\
+	/*0x04[12:11] = 2b'01enable WL suspend*/			\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(3) | BIT(4), 0},
+
+#define RTL8192E_TRANS_CARDEMU_TO_CARDDIS				\
+	/* format */							\
+	/* comments here */						\
+	/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
+	/*0x07=0x20 , SOP option to disable BG/MB*/			\
+	{0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, 0xFF, 0x20},			\
+	/*Unlock small LDO Register*/					\
+	{0x00CC, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(2), BIT(2)},		\
+	/*Disable small LDO*/						\
+	{0x0011, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(0), 0},			\
+	/*0x04[12:11] = 2b'01 enable WL suspend*/			\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,			\
+	 PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC,		\
+	 PWR_CMD_WRITE, BIT(3)|BIT(4), BIT(3)},				\
+	/*0x04[10] = 1, enable SW LPS*/					\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(2), BIT(2)},		\
+	/*Set SDIO suspend local register*/				\
+	{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	 PWR_BASEADDR_SDIO , PWR_CMD_WRITE, BIT(0), BIT(0)},		\
+	/*wait power state to suspend*/					\
+	{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	 PWR_BASEADDR_SDIO , PWR_CMD_POLLING, BIT(1), 0},
+
+#define RTL8192E_TRANS_CARDDIS_TO_CARDEMU				\
+	/* format */							\
+	/* comments here */						\
+	/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
+	/*Set SDIO suspend local register*/				\
+	{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	 PWR_BASEADDR_SDIO , PWR_CMD_WRITE, BIT(0), 0},			\
+	/*wait power state to suspend*/					\
+	{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	 PWR_BASEADDR_SDIO , PWR_CMD_POLLING, BIT(1), BIT(1)},		\
+	/*Enable small LDO*/						\
+	{0x0011, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(0), BIT(0)},		\
+	/*Lock small LDO Register*/					\
+	{0x00CC, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(2), 0},			\
+	/*0x04[12:11] = 2b'01enable WL suspend*/			\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(3) | BIT(4), 0},
+
+#define RTL8192E_TRANS_CARDEMU_TO_PDN					\
+	/* format */							\
+	/* comments here */						\
+	/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
+	/* 0x04[16] = 0*/						\
+	{0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(0), 0},			\
+	/* 0x04[15] = 1*/						\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(7), BIT(7)},
+
+#define RTL8192E_TRANS_PDN_TO_CARDEMU					\
+	/* format */							\
+	/* comments here */						\
+	/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
+	/* 0x04[15] = 0*/						\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(7), 0},
+
+#define RTL8192E_TRANS_ACT_TO_LPS					\
+	/* format */							\
+	/* comments here */						\
+	/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
+	/*PCIe DMA stop*/						\
+	{0x0301, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, 0xFF, 0xFF},			\
+	/*Tx Pause*/							\
+	{0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, 0xFF, 0xFF},			\
+	/*Should be zero if no packet is transmitting*/			\
+	{0x05F8, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_POLLING, 0xFF, 0},			\
+	/*Should be zero if no packet is transmitting*/			\
+	{0x05F9, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_POLLING, 0xFF, 0},			\
+	/*Should be zero if no packet is transmitting*/			\
+	{0x05FA, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_POLLING, 0xFF, 0},			\
+	/*Should be zero if no packet is transmitting*/			\
+	{0x05FB, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_POLLING, 0xFF, 0},			\
+	/*CCK and OFDM are disabled,and clock are gated*/		\
+	{0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(0), 0},			\
+	/*Delay 1us*/							\
+	{0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_DELAY, 0, PWRSEQ_DELAY_US},		\
+	/*Whole BB is reset*/						\
+	{0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(1), 0},			\
+	/*Reset MAC TRX*/						\
+	{0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, 0xFF, 0x03},			\
+	/*check if removed later*/					\
+	{0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(1), 0},			\
+	/*When driver enter Sus/ Disable, enable LOP for BT*/		\
+	{0x0093, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, 0xFF, 0x00},			\
+	/*Respond TxOK to scheduler*/					\
+	{0x0553, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(5), BIT(5)},
+
+#define RTL8192E_TRANS_LPS_TO_ACT					\
+	/* format */							\
+	/* comments here */						\
+	/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
+	/*SDIO RPWM, For Repeatly In and out, Taggle bit should be changed*/\
+	{0x0080, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,	\
+	 PWR_BASEADDR_SDIO , PWR_CMD_WRITE, 0xFF, 0x84},		\
+	/*USB RPWM*/							\
+	{0xFE58, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, 0xFF, 0x84},			\
+	/*PCIe RPWM*/							\
+	{0x0361, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, 0xFF, 0x84},			\
+	/*Delay*/							\
+	{0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_DELAY, 0, PWRSEQ_DELAY_MS},		\
+	/*0x08[4] = 0 switch TSF to 40M*/				\
+	{0x0008, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(4), 0},			\
+	/*Polling 0x109[7]=0  TSF in 40M*/				\
+	{0x0109, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_POLLING, BIT(7), 0},		\
+	/*0x101[1] = 1*/						\
+	{0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(1), BIT(1)},		\
+	/*0x100[7:0] = 0xFF  enable WMAC TRX*/				\
+	{0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, 0xFF, 0xFF},			\
+	/* 0x02[1:0] = 2b'11 enable BB macro*/				\
+	{0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(1) | BIT(0), BIT(1) | BIT(0)},\
+	/*0x522 = 0*/							\
+	{0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, 0xFF, 0},			\
+	/*Clear ISR*/							\
+	{0x013D, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 PWR_BASEADDR_MAC , PWR_CMD_WRITE, 0xFF, 0xFF},
+
+#define RTL8192E_TRANS_END						\
+	/* format */							\
+	/* comments here */						\
+	/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
+	{0xFFFF, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,	\
+	 0, PWR_CMD_END, 0, 0},
+
+extern struct wlan_pwr_cfg rtl8192E_power_on_flow
+					[RTL8192E_TRANS_CARDEMU_TO_ACT_STEPS +
+					 RTL8192E_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8192E_radio_off_flow
+					[RTL8192E_TRANS_ACT_TO_CARDEMU_STEPS +
+					 RTL8192E_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8192E_card_disable_flow
+					[RTL8192E_TRANS_ACT_TO_CARDEMU_STEPS +
+					 RTL8192E_TRANS_CARDEMU_TO_PDN_STEPS +
+					 RTL8192E_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8192E_card_enable_flow
+					[RTL8192E_TRANS_ACT_TO_CARDEMU_STEPS +
+					 RTL8192E_TRANS_CARDEMU_TO_PDN_STEPS +
+					 RTL8192E_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8192E_suspend_flow
+					[RTL8192E_TRANS_ACT_TO_CARDEMU_STEPS +
+					 RTL8192E_TRANS_CARDEMU_TO_SUS_STEPS +
+					 RTL8192E_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8192E_resume_flow
+					[RTL8192E_TRANS_ACT_TO_CARDEMU_STEPS +
+					 RTL8192E_TRANS_CARDEMU_TO_SUS_STEPS +
+					 RTL8192E_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8192E_hwpdn_flow
+					[RTL8192E_TRANS_ACT_TO_CARDEMU_STEPS +
+					 RTL8192E_TRANS_CARDEMU_TO_PDN_STEPS +
+					 RTL8192E_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8192E_enter_lps_flow
+					[RTL8192E_TRANS_ACT_TO_LPS_STEPS +
+					 RTL8192E_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8192E_leave_lps_flow
+					[RTL8192E_TRANS_LPS_TO_ACT_STEPS +
+					 RTL8192E_TRANS_END_STEPS];
+
+/* RTL8192EE Power Configuration CMDs for PCIe interface */
+#define RTL8192E_NIC_PWR_ON_FLOW	rtl8192E_power_on_flow
+#define RTL8192E_NIC_RF_OFF_FLOW	rtl8192E_radio_off_flow
+#define RTL8192E_NIC_DISABLE_FLOW	rtl8192E_card_disable_flow
+#define RTL8192E_NIC_ENABLE_FLOW	rtl8192E_card_enable_flow
+#define RTL8192E_NIC_SUSPEND_FLOW	rtl8192E_suspend_flow
+#define RTL8192E_NIC_RESUME_FLOW	rtl8192E_resume_flow
+#define RTL8192E_NIC_PDN_FLOW		rtl8192E_hwpdn_flow
+#define RTL8192E_NIC_LPS_ENTER_FLOW	rtl8192E_enter_lps_flow
+#define RTL8192E_NIC_LPS_LEAVE_FLOW	rtl8192E_leave_lps_flow
+
+#endif