summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/net/phy
diff options
context:
space:
mode:
authorYunhong Jiang <yunhong.jiang@intel.com>2015-08-04 12:17:53 -0700
committerYunhong Jiang <yunhong.jiang@intel.com>2015-08-04 15:44:42 -0700
commit9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 (patch)
tree1c9cafbcd35f783a87880a10f85d1a060db1a563 /kernel/drivers/net/phy
parent98260f3884f4a202f9ca5eabed40b1354c489b29 (diff)
Add the rt linux 4.1.3-rt3 as base
Import the rt linux 4.1.3-rt3 as OPNFV kvm base. It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and the base is: commit 0917f823c59692d751951bf5ea699a2d1e2f26a2 Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Date: Sat Jul 25 12:13:34 2015 +0200 Prepare v4.1.3-rt3 Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> We lose all the git history this way and it's not good. We should apply another opnfv project repo in future. Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423 Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>
Diffstat (limited to 'kernel/drivers/net/phy')
-rw-r--r--kernel/drivers/net/phy/Kconfig220
-rw-r--r--kernel/drivers/net/phy/Makefile37
-rw-r--r--kernel/drivers/net/phy/amd-xgbe-phy.c1901
-rw-r--r--kernel/drivers/net/phy/amd.c85
-rw-r--r--kernel/drivers/net/phy/at803x.c365
-rw-r--r--kernel/drivers/net/phy/bcm63xx.c111
-rw-r--r--kernel/drivers/net/phy/bcm7xxx.c474
-rw-r--r--kernel/drivers/net/phy/bcm87xx.c221
-rw-r--r--kernel/drivers/net/phy/broadcom.c688
-rw-r--r--kernel/drivers/net/phy/cicada.c140
-rw-r--r--kernel/drivers/net/phy/davicom.c194
-rw-r--r--kernel/drivers/net/phy/dp83640.c1509
-rw-r--r--kernel/drivers/net/phy/dp83640_reg.h267
-rw-r--r--kernel/drivers/net/phy/et1011c.c108
-rw-r--r--kernel/drivers/net/phy/fixed_phy.c366
-rw-r--r--kernel/drivers/net/phy/icplus.c265
-rw-r--r--kernel/drivers/net/phy/lxt.c324
-rw-r--r--kernel/drivers/net/phy/marvell.c1141
-rw-r--r--kernel/drivers/net/phy/mdio-bcm-unimac.c212
-rw-r--r--kernel/drivers/net/phy/mdio-bitbang.c241
-rw-r--r--kernel/drivers/net/phy/mdio-gpio.c278
-rw-r--r--kernel/drivers/net/phy/mdio-moxart.c200
-rw-r--r--kernel/drivers/net/phy/mdio-mux-gpio.c102
-rw-r--r--kernel/drivers/net/phy/mdio-mux-mmioreg.c169
-rw-r--r--kernel/drivers/net/phy/mdio-mux.c198
-rw-r--r--kernel/drivers/net/phy/mdio-octeon.c283
-rw-r--r--kernel/drivers/net/phy/mdio-sun4i.c188
-rw-r--r--kernel/drivers/net/phy/mdio_bus.c612
-rw-r--r--kernel/drivers/net/phy/micrel.c806
-rw-r--r--kernel/drivers/net/phy/national.c157
-rw-r--r--kernel/drivers/net/phy/phy.c1211
-rw-r--r--kernel/drivers/net/phy/phy_device.c1407
-rw-r--r--kernel/drivers/net/phy/qsemi.c135
-rw-r--r--kernel/drivers/net/phy/realtek.c112
-rw-r--r--kernel/drivers/net/phy/smsc.c268
-rw-r--r--kernel/drivers/net/phy/spi_ks8995.c379
-rw-r--r--kernel/drivers/net/phy/ste10Xp.c127
-rw-r--r--kernel/drivers/net/phy/vitesse.c327
38 files changed, 15828 insertions, 0 deletions
diff --git a/kernel/drivers/net/phy/Kconfig b/kernel/drivers/net/phy/Kconfig
new file mode 100644
index 000000000..70641d2c0
--- /dev/null
+++ b/kernel/drivers/net/phy/Kconfig
@@ -0,0 +1,220 @@
+#
+# PHY Layer Configuration
+#
+
+menuconfig PHYLIB
+ tristate "PHY Device support and infrastructure"
+ depends on NETDEVICES
+ help
+ Ethernet controllers are usually attached to PHY
+ devices. This option provides infrastructure for
+ managing PHY devices.
+
+if PHYLIB
+
+comment "MII PHY device drivers"
+
+config AT803X_PHY
+ tristate "Drivers for Atheros AT803X PHYs"
+ ---help---
+ Currently supports the AT8030 and AT8035 model
+
+config AMD_PHY
+ tristate "Drivers for the AMD PHYs"
+ ---help---
+ Currently supports the am79c874
+
+config AMD_XGBE_PHY
+ tristate "Driver for the AMD 10GbE (amd-xgbe) PHYs"
+ depends on (OF || ACPI) && HAS_IOMEM
+ depends on ARM64 || COMPILE_TEST
+ ---help---
+ Currently supports the AMD 10GbE PHY
+
+config MARVELL_PHY
+ tristate "Drivers for Marvell PHYs"
+ ---help---
+ Currently has a driver for the 88E1011S
+
+config DAVICOM_PHY
+ tristate "Drivers for Davicom PHYs"
+ ---help---
+ Currently supports dm9161e and dm9131
+
+config QSEMI_PHY
+ tristate "Drivers for Quality Semiconductor PHYs"
+ ---help---
+ Currently supports the qs6612
+
+config LXT_PHY
+ tristate "Drivers for the Intel LXT PHYs"
+ ---help---
+ Currently supports the lxt970, lxt971
+
+config CICADA_PHY
+ tristate "Drivers for the Cicada PHYs"
+ ---help---
+ Currently supports the cis8204
+
+config VITESSE_PHY
+ tristate "Drivers for the Vitesse PHYs"
+ ---help---
+ Currently supports the vsc8244
+
+config SMSC_PHY
+ tristate "Drivers for SMSC PHYs"
+ ---help---
+ Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs
+
+config BROADCOM_PHY
+ tristate "Drivers for Broadcom PHYs"
+ ---help---
+ Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464,
+ BCM5481 and BCM5482 PHYs.
+
+config BCM63XX_PHY
+ tristate "Drivers for Broadcom 63xx SOCs internal PHY"
+ depends on BCM63XX
+ ---help---
+ Currently supports the 6348 and 6358 PHYs.
+
+config BCM7XXX_PHY
+ tristate "Drivers for Broadcom 7xxx SOCs internal PHYs"
+ ---help---
+ Currently supports the BCM7366, BCM7439, BCM7445, and
+ 40nm and 65nm generation of BCM7xxx Set Top Box SoCs.
+
+config BCM87XX_PHY
+ tristate "Driver for Broadcom BCM8706 and BCM8727 PHYs"
+ help
+ Currently supports the BCM8706 and BCM8727 10G Ethernet PHYs.
+
+config ICPLUS_PHY
+ tristate "Drivers for ICPlus PHYs"
+ ---help---
+ Currently supports the IP175C and IP1001 PHYs.
+
+config REALTEK_PHY
+ tristate "Drivers for Realtek PHYs"
+ ---help---
+ Supports the Realtek 821x PHY.
+
+config NATIONAL_PHY
+ tristate "Drivers for National Semiconductor PHYs"
+ ---help---
+ Currently supports the DP83865 PHY.
+
+config STE10XP
+ tristate "Driver for STMicroelectronics STe10Xp PHYs"
+ ---help---
+ This is the driver for the STe100p and STe101p PHYs.
+
+config LSI_ET1011C_PHY
+ tristate "Driver for LSI ET1011C PHY"
+ ---help---
+ Supports the LSI ET1011C PHY.
+
+config MICREL_PHY
+ tristate "Driver for Micrel PHYs"
+ ---help---
+ Supports the KSZ9021, VSC8201, KS8001 PHYs.
+
+config FIXED_PHY
+ tristate "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
+ depends on PHYLIB
+ ---help---
+ Adds the platform "fixed" MDIO Bus to cover the boards that use
+ PHYs that are not connected to the real MDIO bus.
+
+ Currently tested with mpc866ads and mpc8349e-mitx.
+
+config MDIO_BITBANG
+ tristate "Support for bitbanged MDIO buses"
+ help
+ This module implements the MDIO bus protocol in software,
+ for use by low level drivers that export the ability to
+ drive the relevant pins.
+
+ If in doubt, say N.
+
+config MDIO_GPIO
+ tristate "Support for GPIO lib-based bitbanged MDIO buses"
+ depends on MDIO_BITBANG && GPIOLIB
+ ---help---
+ Supports GPIO lib-based MDIO busses.
+
+ To compile this driver as a module, choose M here: the module
+ will be called mdio-gpio.
+
+config MDIO_OCTEON
+ tristate "Support for MDIO buses on Octeon SOCs"
+ depends on CAVIUM_OCTEON_SOC
+ default y
+ help
+
+ This module provides a driver for the Octeon MDIO busses.
+ It is required by the Octeon Ethernet device drivers.
+
+ If in doubt, say Y.
+
+config MDIO_SUN4I
+ tristate "Allwinner sun4i MDIO interface support"
+ depends on ARCH_SUNXI
+ help
+ This driver supports the MDIO interface found in the network
+ interface units of the Allwinner SoC that have an EMAC (A10,
+ A12, A10s, etc.)
+
+config MDIO_MOXART
+ tristate "MOXA ART MDIO interface support"
+ depends on ARCH_MOXART
+ help
+ This driver supports the MDIO interface found in the network
+ interface units of the MOXA ART SoC
+
+config MDIO_BUS_MUX
+ tristate
+ depends on OF_MDIO
+ help
+ This module provides a driver framework for MDIO bus
+ multiplexers which connect one of several child MDIO busses
+ to a parent bus. Switching between child busses is done by
+ device specific drivers.
+
+config MDIO_BUS_MUX_GPIO
+ tristate "Support for GPIO controlled MDIO bus multiplexers"
+ depends on OF_GPIO && OF_MDIO
+ select MDIO_BUS_MUX
+ help
+ This module provides a driver for MDIO bus multiplexers that
+ are controlled via GPIO lines. The multiplexer connects one of
+ several child MDIO busses to a parent bus. Child bus
+ selection is under the control of GPIO lines.
+
+config MDIO_BUS_MUX_MMIOREG
+ tristate "Support for MMIO device-controlled MDIO bus multiplexers"
+ depends on OF_MDIO
+ select MDIO_BUS_MUX
+ help
+ This module provides a driver for MDIO bus multiplexers that
+ are controlled via a simple memory-mapped device, like an FPGA.
+ The multiplexer connects one of several child MDIO busses to a
+ parent bus. Child bus selection is under the control of one of
+ the FPGA's registers.
+
+ Currently, only 8-bit registers are supported.
+
+config MDIO_BCM_UNIMAC
+ tristate "Broadcom UniMAC MDIO bus controller"
+ depends on HAS_IOMEM
+ help
+ This module provides a driver for the Broadcom UniMAC MDIO busses.
+ This hardware can be found in the Broadcom GENET Ethernet MAC
+ controllers as well as some Broadcom Ethernet switches such as the
+ Starfighter 2 switches.
+
+endif # PHYLIB
+
+config MICREL_KS8995MA
+ tristate "Micrel KS8995MA 5-ports 10/100 managed Ethernet switch"
+ depends on SPI
diff --git a/kernel/drivers/net/phy/Makefile b/kernel/drivers/net/phy/Makefile
new file mode 100644
index 000000000..501ea7699
--- /dev/null
+++ b/kernel/drivers/net/phy/Makefile
@@ -0,0 +1,37 @@
+# Makefile for Linux PHY drivers
+
+libphy-objs := phy.o phy_device.o mdio_bus.o
+
+obj-$(CONFIG_PHYLIB) += libphy.o
+obj-$(CONFIG_MARVELL_PHY) += marvell.o
+obj-$(CONFIG_DAVICOM_PHY) += davicom.o
+obj-$(CONFIG_CICADA_PHY) += cicada.o
+obj-$(CONFIG_LXT_PHY) += lxt.o
+obj-$(CONFIG_QSEMI_PHY) += qsemi.o
+obj-$(CONFIG_SMSC_PHY) += smsc.o
+obj-$(CONFIG_VITESSE_PHY) += vitesse.o
+obj-$(CONFIG_BROADCOM_PHY) += broadcom.o
+obj-$(CONFIG_BCM63XX_PHY) += bcm63xx.o
+obj-$(CONFIG_BCM7XXX_PHY) += bcm7xxx.o
+obj-$(CONFIG_BCM87XX_PHY) += bcm87xx.o
+obj-$(CONFIG_ICPLUS_PHY) += icplus.o
+obj-$(CONFIG_REALTEK_PHY) += realtek.o
+obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
+obj-$(CONFIG_FIXED_PHY) += fixed_phy.o
+obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o
+obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o
+obj-$(CONFIG_NATIONAL_PHY) += national.o
+obj-$(CONFIG_DP83640_PHY) += dp83640.o
+obj-$(CONFIG_STE10XP) += ste10Xp.o
+obj-$(CONFIG_MICREL_PHY) += micrel.o
+obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o
+obj-$(CONFIG_MICREL_KS8995MA) += spi_ks8995.o
+obj-$(CONFIG_AT803X_PHY) += at803x.o
+obj-$(CONFIG_AMD_PHY) += amd.o
+obj-$(CONFIG_MDIO_BUS_MUX) += mdio-mux.o
+obj-$(CONFIG_MDIO_BUS_MUX_GPIO) += mdio-mux-gpio.o
+obj-$(CONFIG_MDIO_BUS_MUX_MMIOREG) += mdio-mux-mmioreg.o
+obj-$(CONFIG_MDIO_SUN4I) += mdio-sun4i.o
+obj-$(CONFIG_MDIO_MOXART) += mdio-moxart.o
+obj-$(CONFIG_AMD_XGBE_PHY) += amd-xgbe-phy.o
+obj-$(CONFIG_MDIO_BCM_UNIMAC) += mdio-bcm-unimac.o
diff --git a/kernel/drivers/net/phy/amd-xgbe-phy.c b/kernel/drivers/net/phy/amd-xgbe-phy.c
new file mode 100644
index 000000000..34a75cba3
--- /dev/null
+++ b/kernel/drivers/net/phy/amd-xgbe-phy.c
@@ -0,0 +1,1901 @@
+/*
+ * AMD 10Gb Ethernet PHY driver
+ *
+ * This file is available to you under your choice of the following two
+ * licenses:
+ *
+ * License 1: GPLv2
+ *
+ * Copyright (c) 2014 Advanced Micro Devices, Inc.
+ *
+ * This file is free software; you may copy, redistribute and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ *
+ * License 2: Modified BSD
+ *
+ * Copyright (c) 2014 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL <COPYRIGHT HOLDER> BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/unistd.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/workqueue.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+#include <linux/mdio.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/of_device.h>
+#include <linux/uaccess.h>
+#include <linux/bitops.h>
+#include <linux/property.h>
+#include <linux/acpi.h>
+#include <linux/jiffies.h>
+
+MODULE_AUTHOR("Tom Lendacky <thomas.lendacky@amd.com>");
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_VERSION("1.0.0-a");
+MODULE_DESCRIPTION("AMD 10GbE (amd-xgbe) PHY driver");
+
+#define XGBE_PHY_ID 0x000162d0
+#define XGBE_PHY_MASK 0xfffffff0
+
+#define XGBE_PHY_SPEEDSET_PROPERTY "amd,speed-set"
+#define XGBE_PHY_BLWC_PROPERTY "amd,serdes-blwc"
+#define XGBE_PHY_CDR_RATE_PROPERTY "amd,serdes-cdr-rate"
+#define XGBE_PHY_PQ_SKEW_PROPERTY "amd,serdes-pq-skew"
+#define XGBE_PHY_TX_AMP_PROPERTY "amd,serdes-tx-amp"
+#define XGBE_PHY_DFE_CFG_PROPERTY "amd,serdes-dfe-tap-config"
+#define XGBE_PHY_DFE_ENA_PROPERTY "amd,serdes-dfe-tap-enable"
+
+#define XGBE_PHY_SPEEDS 3
+#define XGBE_PHY_SPEED_1000 0
+#define XGBE_PHY_SPEED_2500 1
+#define XGBE_PHY_SPEED_10000 2
+
+#define XGBE_AN_MS_TIMEOUT 500
+
+#define XGBE_AN_INT_CMPLT 0x01
+#define XGBE_AN_INC_LINK 0x02
+#define XGBE_AN_PG_RCV 0x04
+#define XGBE_AN_INT_MASK 0x07
+
+#define XNP_MCF_NULL_MESSAGE 0x001
+#define XNP_ACK_PROCESSED BIT(12)
+#define XNP_MP_FORMATTED BIT(13)
+#define XNP_NP_EXCHANGE BIT(15)
+
+#define XGBE_PHY_RATECHANGE_COUNT 500
+
+#define XGBE_PHY_KR_TRAINING_START 0x01
+#define XGBE_PHY_KR_TRAINING_ENABLE 0x02
+
+#define XGBE_PHY_FEC_ENABLE 0x01
+#define XGBE_PHY_FEC_FORWARD 0x02
+#define XGBE_PHY_FEC_MASK 0x03
+
+#ifndef MDIO_PMA_10GBR_PMD_CTRL
+#define MDIO_PMA_10GBR_PMD_CTRL 0x0096
+#endif
+
+#ifndef MDIO_PMA_10GBR_FEC_ABILITY
+#define MDIO_PMA_10GBR_FEC_ABILITY 0x00aa
+#endif
+
+#ifndef MDIO_PMA_10GBR_FEC_CTRL
+#define MDIO_PMA_10GBR_FEC_CTRL 0x00ab
+#endif
+
+#ifndef MDIO_AN_XNP
+#define MDIO_AN_XNP 0x0016
+#endif
+
+#ifndef MDIO_AN_LPX
+#define MDIO_AN_LPX 0x0019
+#endif
+
+#ifndef MDIO_AN_INTMASK
+#define MDIO_AN_INTMASK 0x8001
+#endif
+
+#ifndef MDIO_AN_INT
+#define MDIO_AN_INT 0x8002
+#endif
+
+#ifndef MDIO_CTRL1_SPEED1G
+#define MDIO_CTRL1_SPEED1G (MDIO_CTRL1_SPEED10G & ~BMCR_SPEED100)
+#endif
+
+/* SerDes integration register offsets */
+#define SIR0_KR_RT_1 0x002c
+#define SIR0_STATUS 0x0040
+#define SIR1_SPEED 0x0000
+
+/* SerDes integration register entry bit positions and sizes */
+#define SIR0_KR_RT_1_RESET_INDEX 11
+#define SIR0_KR_RT_1_RESET_WIDTH 1
+#define SIR0_STATUS_RX_READY_INDEX 0
+#define SIR0_STATUS_RX_READY_WIDTH 1
+#define SIR0_STATUS_TX_READY_INDEX 8
+#define SIR0_STATUS_TX_READY_WIDTH 1
+#define SIR1_SPEED_CDR_RATE_INDEX 12
+#define SIR1_SPEED_CDR_RATE_WIDTH 4
+#define SIR1_SPEED_DATARATE_INDEX 4
+#define SIR1_SPEED_DATARATE_WIDTH 2
+#define SIR1_SPEED_PLLSEL_INDEX 3
+#define SIR1_SPEED_PLLSEL_WIDTH 1
+#define SIR1_SPEED_RATECHANGE_INDEX 6
+#define SIR1_SPEED_RATECHANGE_WIDTH 1
+#define SIR1_SPEED_TXAMP_INDEX 8
+#define SIR1_SPEED_TXAMP_WIDTH 4
+#define SIR1_SPEED_WORDMODE_INDEX 0
+#define SIR1_SPEED_WORDMODE_WIDTH 3
+
+#define SPEED_10000_BLWC 0
+#define SPEED_10000_CDR 0x7
+#define SPEED_10000_PLL 0x1
+#define SPEED_10000_PQ 0x12
+#define SPEED_10000_RATE 0x0
+#define SPEED_10000_TXAMP 0xa
+#define SPEED_10000_WORD 0x7
+#define SPEED_10000_DFE_TAP_CONFIG 0x1
+#define SPEED_10000_DFE_TAP_ENABLE 0x7f
+
+#define SPEED_2500_BLWC 1
+#define SPEED_2500_CDR 0x2
+#define SPEED_2500_PLL 0x0
+#define SPEED_2500_PQ 0xa
+#define SPEED_2500_RATE 0x1
+#define SPEED_2500_TXAMP 0xf
+#define SPEED_2500_WORD 0x1
+#define SPEED_2500_DFE_TAP_CONFIG 0x3
+#define SPEED_2500_DFE_TAP_ENABLE 0x0
+
+#define SPEED_1000_BLWC 1
+#define SPEED_1000_CDR 0x2
+#define SPEED_1000_PLL 0x0
+#define SPEED_1000_PQ 0xa
+#define SPEED_1000_RATE 0x3
+#define SPEED_1000_TXAMP 0xf
+#define SPEED_1000_WORD 0x1
+#define SPEED_1000_DFE_TAP_CONFIG 0x3
+#define SPEED_1000_DFE_TAP_ENABLE 0x0
+
+/* SerDes RxTx register offsets */
+#define RXTX_REG6 0x0018
+#define RXTX_REG20 0x0050
+#define RXTX_REG22 0x0058
+#define RXTX_REG114 0x01c8
+#define RXTX_REG129 0x0204
+
+/* SerDes RxTx register entry bit positions and sizes */
+#define RXTX_REG6_RESETB_RXD_INDEX 8
+#define RXTX_REG6_RESETB_RXD_WIDTH 1
+#define RXTX_REG20_BLWC_ENA_INDEX 2
+#define RXTX_REG20_BLWC_ENA_WIDTH 1
+#define RXTX_REG114_PQ_REG_INDEX 9
+#define RXTX_REG114_PQ_REG_WIDTH 7
+#define RXTX_REG129_RXDFE_CONFIG_INDEX 14
+#define RXTX_REG129_RXDFE_CONFIG_WIDTH 2
+
+/* Bit setting and getting macros
+ * The get macro will extract the current bit field value from within
+ * the variable
+ *
+ * The set macro will clear the current bit field value within the
+ * variable and then set the bit field of the variable to the
+ * specified value
+ */
+#define GET_BITS(_var, _index, _width) \
+ (((_var) >> (_index)) & ((0x1 << (_width)) - 1))
+
+#define SET_BITS(_var, _index, _width, _val) \
+do { \
+ (_var) &= ~(((0x1 << (_width)) - 1) << (_index)); \
+ (_var) |= (((_val) & ((0x1 << (_width)) - 1)) << (_index)); \
+} while (0)
+
+#define XSIR_GET_BITS(_var, _prefix, _field) \
+ GET_BITS((_var), \
+ _prefix##_##_field##_INDEX, \
+ _prefix##_##_field##_WIDTH)
+
+#define XSIR_SET_BITS(_var, _prefix, _field, _val) \
+ SET_BITS((_var), \
+ _prefix##_##_field##_INDEX, \
+ _prefix##_##_field##_WIDTH, (_val))
+
+/* Macros for reading or writing SerDes integration registers
+ * The ioread macros will get bit fields or full values using the
+ * register definitions formed using the input names
+ *
+ * The iowrite macros will set bit fields or full values using the
+ * register definitions formed using the input names
+ */
+#define XSIR0_IOREAD(_priv, _reg) \
+ ioread16((_priv)->sir0_regs + _reg)
+
+#define XSIR0_IOREAD_BITS(_priv, _reg, _field) \
+ GET_BITS(XSIR0_IOREAD((_priv), _reg), \
+ _reg##_##_field##_INDEX, \
+ _reg##_##_field##_WIDTH)
+
+#define XSIR0_IOWRITE(_priv, _reg, _val) \
+ iowrite16((_val), (_priv)->sir0_regs + _reg)
+
+#define XSIR0_IOWRITE_BITS(_priv, _reg, _field, _val) \
+do { \
+ u16 reg_val = XSIR0_IOREAD((_priv), _reg); \
+ SET_BITS(reg_val, \
+ _reg##_##_field##_INDEX, \
+ _reg##_##_field##_WIDTH, (_val)); \
+ XSIR0_IOWRITE((_priv), _reg, reg_val); \
+} while (0)
+
+#define XSIR1_IOREAD(_priv, _reg) \
+ ioread16((_priv)->sir1_regs + _reg)
+
+#define XSIR1_IOREAD_BITS(_priv, _reg, _field) \
+ GET_BITS(XSIR1_IOREAD((_priv), _reg), \
+ _reg##_##_field##_INDEX, \
+ _reg##_##_field##_WIDTH)
+
+#define XSIR1_IOWRITE(_priv, _reg, _val) \
+ iowrite16((_val), (_priv)->sir1_regs + _reg)
+
+#define XSIR1_IOWRITE_BITS(_priv, _reg, _field, _val) \
+do { \
+ u16 reg_val = XSIR1_IOREAD((_priv), _reg); \
+ SET_BITS(reg_val, \
+ _reg##_##_field##_INDEX, \
+ _reg##_##_field##_WIDTH, (_val)); \
+ XSIR1_IOWRITE((_priv), _reg, reg_val); \
+} while (0)
+
+/* Macros for reading or writing SerDes RxTx registers
+ * The ioread macros will get bit fields or full values using the
+ * register definitions formed using the input names
+ *
+ * The iowrite macros will set bit fields or full values using the
+ * register definitions formed using the input names
+ */
+#define XRXTX_IOREAD(_priv, _reg) \
+ ioread16((_priv)->rxtx_regs + _reg)
+
+#define XRXTX_IOREAD_BITS(_priv, _reg, _field) \
+ GET_BITS(XRXTX_IOREAD((_priv), _reg), \
+ _reg##_##_field##_INDEX, \
+ _reg##_##_field##_WIDTH)
+
+#define XRXTX_IOWRITE(_priv, _reg, _val) \
+ iowrite16((_val), (_priv)->rxtx_regs + _reg)
+
+#define XRXTX_IOWRITE_BITS(_priv, _reg, _field, _val) \
+do { \
+ u16 reg_val = XRXTX_IOREAD((_priv), _reg); \
+ SET_BITS(reg_val, \
+ _reg##_##_field##_INDEX, \
+ _reg##_##_field##_WIDTH, (_val)); \
+ XRXTX_IOWRITE((_priv), _reg, reg_val); \
+} while (0)
+
+static const u32 amd_xgbe_phy_serdes_blwc[] = {
+ SPEED_1000_BLWC,
+ SPEED_2500_BLWC,
+ SPEED_10000_BLWC,
+};
+
+static const u32 amd_xgbe_phy_serdes_cdr_rate[] = {
+ SPEED_1000_CDR,
+ SPEED_2500_CDR,
+ SPEED_10000_CDR,
+};
+
+static const u32 amd_xgbe_phy_serdes_pq_skew[] = {
+ SPEED_1000_PQ,
+ SPEED_2500_PQ,
+ SPEED_10000_PQ,
+};
+
+static const u32 amd_xgbe_phy_serdes_tx_amp[] = {
+ SPEED_1000_TXAMP,
+ SPEED_2500_TXAMP,
+ SPEED_10000_TXAMP,
+};
+
+static const u32 amd_xgbe_phy_serdes_dfe_tap_cfg[] = {
+ SPEED_1000_DFE_TAP_CONFIG,
+ SPEED_2500_DFE_TAP_CONFIG,
+ SPEED_10000_DFE_TAP_CONFIG,
+};
+
+static const u32 amd_xgbe_phy_serdes_dfe_tap_ena[] = {
+ SPEED_1000_DFE_TAP_ENABLE,
+ SPEED_2500_DFE_TAP_ENABLE,
+ SPEED_10000_DFE_TAP_ENABLE,
+};
+
+enum amd_xgbe_phy_an {
+ AMD_XGBE_AN_READY = 0,
+ AMD_XGBE_AN_PAGE_RECEIVED,
+ AMD_XGBE_AN_INCOMPAT_LINK,
+ AMD_XGBE_AN_COMPLETE,
+ AMD_XGBE_AN_NO_LINK,
+ AMD_XGBE_AN_ERROR,
+};
+
+enum amd_xgbe_phy_rx {
+ AMD_XGBE_RX_BPA = 0,
+ AMD_XGBE_RX_XNP,
+ AMD_XGBE_RX_COMPLETE,
+ AMD_XGBE_RX_ERROR,
+};
+
+enum amd_xgbe_phy_mode {
+ AMD_XGBE_MODE_KR,
+ AMD_XGBE_MODE_KX,
+};
+
+enum amd_xgbe_phy_speedset {
+ AMD_XGBE_PHY_SPEEDSET_1000_10000 = 0,
+ AMD_XGBE_PHY_SPEEDSET_2500_10000,
+};
+
+struct amd_xgbe_phy_priv {
+ struct platform_device *pdev;
+ struct acpi_device *adev;
+ struct device *dev;
+
+ struct phy_device *phydev;
+
+ /* SerDes related mmio resources */
+ struct resource *rxtx_res;
+ struct resource *sir0_res;
+ struct resource *sir1_res;
+
+ /* SerDes related mmio registers */
+ void __iomem *rxtx_regs; /* SerDes Rx/Tx CSRs */
+ void __iomem *sir0_regs; /* SerDes integration registers (1/2) */
+ void __iomem *sir1_regs; /* SerDes integration registers (2/2) */
+
+ int an_irq;
+ char an_irq_name[IFNAMSIZ + 32];
+ struct work_struct an_irq_work;
+ unsigned int an_irq_allocated;
+
+ unsigned int speed_set;
+
+ /* SerDes UEFI configurable settings.
+ * Switching between modes/speeds requires new values for some
+ * SerDes settings. The values can be supplied as device
+ * properties in array format. The first array entry is for
+ * 1GbE, second for 2.5GbE and third for 10GbE
+ */
+ u32 serdes_blwc[XGBE_PHY_SPEEDS];
+ u32 serdes_cdr_rate[XGBE_PHY_SPEEDS];
+ u32 serdes_pq_skew[XGBE_PHY_SPEEDS];
+ u32 serdes_tx_amp[XGBE_PHY_SPEEDS];
+ u32 serdes_dfe_tap_cfg[XGBE_PHY_SPEEDS];
+ u32 serdes_dfe_tap_ena[XGBE_PHY_SPEEDS];
+
+ /* Auto-negotiation state machine support */
+ struct mutex an_mutex;
+ enum amd_xgbe_phy_an an_result;
+ enum amd_xgbe_phy_an an_state;
+ enum amd_xgbe_phy_rx kr_state;
+ enum amd_xgbe_phy_rx kx_state;
+ struct work_struct an_work;
+ struct workqueue_struct *an_workqueue;
+ unsigned int an_supported;
+ unsigned int parallel_detect;
+ unsigned int fec_ability;
+ unsigned long an_start;
+
+ unsigned int lpm_ctrl; /* CTRL1 for resume */
+};
+
+static int amd_xgbe_an_enable_kr_training(struct phy_device *phydev)
+{
+ int ret;
+
+ ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_PMD_CTRL);
+ if (ret < 0)
+ return ret;
+
+ ret |= XGBE_PHY_KR_TRAINING_ENABLE;
+ phy_write_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_PMD_CTRL, ret);
+
+ return 0;
+}
+
+static int amd_xgbe_an_disable_kr_training(struct phy_device *phydev)
+{
+ int ret;
+
+ ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_PMD_CTRL);
+ if (ret < 0)
+ return ret;
+
+ ret &= ~XGBE_PHY_KR_TRAINING_ENABLE;
+ phy_write_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_PMD_CTRL, ret);
+
+ return 0;
+}
+
+static int amd_xgbe_phy_pcs_power_cycle(struct phy_device *phydev)
+{
+ int ret;
+
+ ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1);
+ if (ret < 0)
+ return ret;
+
+ ret |= MDIO_CTRL1_LPOWER;
+ phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1, ret);
+
+ usleep_range(75, 100);
+
+ ret &= ~MDIO_CTRL1_LPOWER;
+ phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1, ret);
+
+ return 0;
+}
+
+static void amd_xgbe_phy_serdes_start_ratechange(struct phy_device *phydev)
+{
+ struct amd_xgbe_phy_priv *priv = phydev->priv;
+
+ /* Assert Rx and Tx ratechange */
+ XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, RATECHANGE, 1);
+}
+
+static void amd_xgbe_phy_serdes_complete_ratechange(struct phy_device *phydev)
+{
+ struct amd_xgbe_phy_priv *priv = phydev->priv;
+ unsigned int wait;
+ u16 status;
+
+ /* Release Rx and Tx ratechange */
+ XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, RATECHANGE, 0);
+
+ /* Wait for Rx and Tx ready */
+ wait = XGBE_PHY_RATECHANGE_COUNT;
+ while (wait--) {
+ usleep_range(50, 75);
+
+ status = XSIR0_IOREAD(priv, SIR0_STATUS);
+ if (XSIR_GET_BITS(status, SIR0_STATUS, RX_READY) &&
+ XSIR_GET_BITS(status, SIR0_STATUS, TX_READY))
+ goto rx_reset;
+ }
+
+ netdev_dbg(phydev->attached_dev, "SerDes rx/tx not ready (%#hx)\n",
+ status);
+
+rx_reset:
+ /* Perform Rx reset for the DFE changes */
+ XRXTX_IOWRITE_BITS(priv, RXTX_REG6, RESETB_RXD, 0);
+ XRXTX_IOWRITE_BITS(priv, RXTX_REG6, RESETB_RXD, 1);
+}
+
+static int amd_xgbe_phy_xgmii_mode(struct phy_device *phydev)
+{
+ struct amd_xgbe_phy_priv *priv = phydev->priv;
+ int ret;
+
+ /* Enable KR training */
+ ret = amd_xgbe_an_enable_kr_training(phydev);
+ if (ret < 0)
+ return ret;
+
+ /* Set PCS to KR/10G speed */
+ ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL2);
+ if (ret < 0)
+ return ret;
+
+ ret &= ~MDIO_PCS_CTRL2_TYPE;
+ ret |= MDIO_PCS_CTRL2_10GBR;
+ phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL2, ret);
+
+ ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1);
+ if (ret < 0)
+ return ret;
+
+ ret &= ~MDIO_CTRL1_SPEEDSEL;
+ ret |= MDIO_CTRL1_SPEED10G;
+ phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1, ret);
+
+ ret = amd_xgbe_phy_pcs_power_cycle(phydev);
+ if (ret < 0)
+ return ret;
+
+ /* Set SerDes to 10G speed */
+ amd_xgbe_phy_serdes_start_ratechange(phydev);
+
+ XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, DATARATE, SPEED_10000_RATE);
+ XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, WORDMODE, SPEED_10000_WORD);
+ XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, PLLSEL, SPEED_10000_PLL);
+
+ XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, CDR_RATE,
+ priv->serdes_cdr_rate[XGBE_PHY_SPEED_10000]);
+ XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, TXAMP,
+ priv->serdes_tx_amp[XGBE_PHY_SPEED_10000]);
+ XRXTX_IOWRITE_BITS(priv, RXTX_REG20, BLWC_ENA,
+ priv->serdes_blwc[XGBE_PHY_SPEED_10000]);
+ XRXTX_IOWRITE_BITS(priv, RXTX_REG114, PQ_REG,
+ priv->serdes_pq_skew[XGBE_PHY_SPEED_10000]);
+ XRXTX_IOWRITE_BITS(priv, RXTX_REG129, RXDFE_CONFIG,
+ priv->serdes_dfe_tap_cfg[XGBE_PHY_SPEED_10000]);
+ XRXTX_IOWRITE(priv, RXTX_REG22,
+ priv->serdes_dfe_tap_ena[XGBE_PHY_SPEED_10000]);
+
+ amd_xgbe_phy_serdes_complete_ratechange(phydev);
+
+ return 0;
+}
+
+static int amd_xgbe_phy_gmii_2500_mode(struct phy_device *phydev)
+{
+ struct amd_xgbe_phy_priv *priv = phydev->priv;
+ int ret;
+
+ /* Disable KR training */
+ ret = amd_xgbe_an_disable_kr_training(phydev);
+ if (ret < 0)
+ return ret;
+
+ /* Set PCS to KX/1G speed */
+ ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL2);
+ if (ret < 0)
+ return ret;
+
+ ret &= ~MDIO_PCS_CTRL2_TYPE;
+ ret |= MDIO_PCS_CTRL2_10GBX;
+ phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL2, ret);
+
+ ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1);
+ if (ret < 0)
+ return ret;
+
+ ret &= ~MDIO_CTRL1_SPEEDSEL;
+ ret |= MDIO_CTRL1_SPEED1G;
+ phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1, ret);
+
+ ret = amd_xgbe_phy_pcs_power_cycle(phydev);
+ if (ret < 0)
+ return ret;
+
+ /* Set SerDes to 2.5G speed */
+ amd_xgbe_phy_serdes_start_ratechange(phydev);
+
+ XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, DATARATE, SPEED_2500_RATE);
+ XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, WORDMODE, SPEED_2500_WORD);
+ XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, PLLSEL, SPEED_2500_PLL);
+
+ XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, CDR_RATE,
+ priv->serdes_cdr_rate[XGBE_PHY_SPEED_2500]);
+ XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, TXAMP,
+ priv->serdes_tx_amp[XGBE_PHY_SPEED_2500]);
+ XRXTX_IOWRITE_BITS(priv, RXTX_REG20, BLWC_ENA,
+ priv->serdes_blwc[XGBE_PHY_SPEED_2500]);
+ XRXTX_IOWRITE_BITS(priv, RXTX_REG114, PQ_REG,
+ priv->serdes_pq_skew[XGBE_PHY_SPEED_2500]);
+ XRXTX_IOWRITE_BITS(priv, RXTX_REG129, RXDFE_CONFIG,
+ priv->serdes_dfe_tap_cfg[XGBE_PHY_SPEED_2500]);
+ XRXTX_IOWRITE(priv, RXTX_REG22,
+ priv->serdes_dfe_tap_ena[XGBE_PHY_SPEED_2500]);
+
+ amd_xgbe_phy_serdes_complete_ratechange(phydev);
+
+ return 0;
+}
+
+static int amd_xgbe_phy_gmii_mode(struct phy_device *phydev)
+{
+ struct amd_xgbe_phy_priv *priv = phydev->priv;
+ int ret;
+
+ /* Disable KR training */
+ ret = amd_xgbe_an_disable_kr_training(phydev);
+ if (ret < 0)
+ return ret;
+
+ /* Set PCS to KX/1G speed */
+ ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL2);
+ if (ret < 0)
+ return ret;
+
+ ret &= ~MDIO_PCS_CTRL2_TYPE;
+ ret |= MDIO_PCS_CTRL2_10GBX;
+ phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL2, ret);
+
+ ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1);
+ if (ret < 0)
+ return ret;
+
+ ret &= ~MDIO_CTRL1_SPEEDSEL;
+ ret |= MDIO_CTRL1_SPEED1G;
+ phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1, ret);
+
+ ret = amd_xgbe_phy_pcs_power_cycle(phydev);
+ if (ret < 0)
+ return ret;
+
+ /* Set SerDes to 1G speed */
+ amd_xgbe_phy_serdes_start_ratechange(phydev);
+
+ XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, DATARATE, SPEED_1000_RATE);
+ XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, WORDMODE, SPEED_1000_WORD);
+ XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, PLLSEL, SPEED_1000_PLL);
+
+ XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, CDR_RATE,
+ priv->serdes_cdr_rate[XGBE_PHY_SPEED_1000]);
+ XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, TXAMP,
+ priv->serdes_tx_amp[XGBE_PHY_SPEED_1000]);
+ XRXTX_IOWRITE_BITS(priv, RXTX_REG20, BLWC_ENA,
+ priv->serdes_blwc[XGBE_PHY_SPEED_1000]);
+ XRXTX_IOWRITE_BITS(priv, RXTX_REG114, PQ_REG,
+ priv->serdes_pq_skew[XGBE_PHY_SPEED_1000]);
+ XRXTX_IOWRITE_BITS(priv, RXTX_REG129, RXDFE_CONFIG,
+ priv->serdes_dfe_tap_cfg[XGBE_PHY_SPEED_1000]);
+ XRXTX_IOWRITE(priv, RXTX_REG22,
+ priv->serdes_dfe_tap_ena[XGBE_PHY_SPEED_1000]);
+
+ amd_xgbe_phy_serdes_complete_ratechange(phydev);
+
+ return 0;
+}
+
+static int amd_xgbe_phy_cur_mode(struct phy_device *phydev,
+ enum amd_xgbe_phy_mode *mode)
+{
+ int ret;
+
+ ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL2);
+ if (ret < 0)
+ return ret;
+
+ if ((ret & MDIO_PCS_CTRL2_TYPE) == MDIO_PCS_CTRL2_10GBR)
+ *mode = AMD_XGBE_MODE_KR;
+ else
+ *mode = AMD_XGBE_MODE_KX;
+
+ return 0;
+}
+
+static bool amd_xgbe_phy_in_kr_mode(struct phy_device *phydev)
+{
+ enum amd_xgbe_phy_mode mode;
+
+ if (amd_xgbe_phy_cur_mode(phydev, &mode))
+ return false;
+
+ return (mode == AMD_XGBE_MODE_KR);
+}
+
+static int amd_xgbe_phy_switch_mode(struct phy_device *phydev)
+{
+ struct amd_xgbe_phy_priv *priv = phydev->priv;
+ int ret;
+
+ /* If we are in KR switch to KX, and vice-versa */
+ if (amd_xgbe_phy_in_kr_mode(phydev)) {
+ if (priv->speed_set == AMD_XGBE_PHY_SPEEDSET_1000_10000)
+ ret = amd_xgbe_phy_gmii_mode(phydev);
+ else
+ ret = amd_xgbe_phy_gmii_2500_mode(phydev);
+ } else {
+ ret = amd_xgbe_phy_xgmii_mode(phydev);
+ }
+
+ return ret;
+}
+
+static int amd_xgbe_phy_set_mode(struct phy_device *phydev,
+ enum amd_xgbe_phy_mode mode)
+{
+ enum amd_xgbe_phy_mode cur_mode;
+ int ret;
+
+ ret = amd_xgbe_phy_cur_mode(phydev, &cur_mode);
+ if (ret)
+ return ret;
+
+ if (mode != cur_mode)
+ ret = amd_xgbe_phy_switch_mode(phydev);
+
+ return ret;
+}
+
+static bool amd_xgbe_phy_use_xgmii_mode(struct phy_device *phydev)
+{
+ if (phydev->autoneg == AUTONEG_ENABLE) {
+ if (phydev->advertising & ADVERTISED_10000baseKR_Full)
+ return true;
+ } else {
+ if (phydev->speed == SPEED_10000)
+ return true;
+ }
+
+ return false;
+}
+
+static bool amd_xgbe_phy_use_gmii_2500_mode(struct phy_device *phydev)
+{
+ if (phydev->autoneg == AUTONEG_ENABLE) {
+ if (phydev->advertising & ADVERTISED_2500baseX_Full)
+ return true;
+ } else {
+ if (phydev->speed == SPEED_2500)
+ return true;
+ }
+
+ return false;
+}
+
+static bool amd_xgbe_phy_use_gmii_mode(struct phy_device *phydev)
+{
+ if (phydev->autoneg == AUTONEG_ENABLE) {
+ if (phydev->advertising & ADVERTISED_1000baseKX_Full)
+ return true;
+ } else {
+ if (phydev->speed == SPEED_1000)
+ return true;
+ }
+
+ return false;
+}
+
+static int amd_xgbe_phy_set_an(struct phy_device *phydev, bool enable,
+ bool restart)
+{
+ int ret;
+
+ ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1);
+ if (ret < 0)
+ return ret;
+
+ ret &= ~MDIO_AN_CTRL1_ENABLE;
+
+ if (enable)
+ ret |= MDIO_AN_CTRL1_ENABLE;
+
+ if (restart)
+ ret |= MDIO_AN_CTRL1_RESTART;
+
+ phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1, ret);
+
+ return 0;
+}
+
+static int amd_xgbe_phy_restart_an(struct phy_device *phydev)
+{
+ return amd_xgbe_phy_set_an(phydev, true, true);
+}
+
+static int amd_xgbe_phy_disable_an(struct phy_device *phydev)
+{
+ return amd_xgbe_phy_set_an(phydev, false, false);
+}
+
+static enum amd_xgbe_phy_an amd_xgbe_an_tx_training(struct phy_device *phydev,
+ enum amd_xgbe_phy_rx *state)
+{
+ struct amd_xgbe_phy_priv *priv = phydev->priv;
+ int ad_reg, lp_reg, ret;
+
+ *state = AMD_XGBE_RX_COMPLETE;
+
+ /* If we're not in KR mode then we're done */
+ if (!amd_xgbe_phy_in_kr_mode(phydev))
+ return AMD_XGBE_AN_PAGE_RECEIVED;
+
+ /* Enable/Disable FEC */
+ ad_reg = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE + 2);
+ if (ad_reg < 0)
+ return AMD_XGBE_AN_ERROR;
+
+ lp_reg = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_LPA + 2);
+ if (lp_reg < 0)
+ return AMD_XGBE_AN_ERROR;
+
+ ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_FEC_CTRL);
+ if (ret < 0)
+ return AMD_XGBE_AN_ERROR;
+
+ ret &= ~XGBE_PHY_FEC_MASK;
+ if ((ad_reg & 0xc000) && (lp_reg & 0xc000))
+ ret |= priv->fec_ability;
+
+ phy_write_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_FEC_CTRL, ret);
+
+ /* Start KR training */
+ ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_PMD_CTRL);
+ if (ret < 0)
+ return AMD_XGBE_AN_ERROR;
+
+ if (ret & XGBE_PHY_KR_TRAINING_ENABLE) {
+ XSIR0_IOWRITE_BITS(priv, SIR0_KR_RT_1, RESET, 1);
+
+ ret |= XGBE_PHY_KR_TRAINING_START;
+ phy_write_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_PMD_CTRL,
+ ret);
+
+ XSIR0_IOWRITE_BITS(priv, SIR0_KR_RT_1, RESET, 0);
+ }
+
+ return AMD_XGBE_AN_PAGE_RECEIVED;
+}
+
+static enum amd_xgbe_phy_an amd_xgbe_an_tx_xnp(struct phy_device *phydev,
+ enum amd_xgbe_phy_rx *state)
+{
+ u16 msg;
+
+ *state = AMD_XGBE_RX_XNP;
+
+ msg = XNP_MCF_NULL_MESSAGE;
+ msg |= XNP_MP_FORMATTED;
+
+ phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_XNP + 2, 0);
+ phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_XNP + 1, 0);
+ phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_XNP, msg);
+
+ return AMD_XGBE_AN_PAGE_RECEIVED;
+}
+
+static enum amd_xgbe_phy_an amd_xgbe_an_rx_bpa(struct phy_device *phydev,
+ enum amd_xgbe_phy_rx *state)
+{
+ unsigned int link_support;
+ int ret, ad_reg, lp_reg;
+
+ /* Read Base Ability register 2 first */
+ ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_LPA + 1);
+ if (ret < 0)
+ return AMD_XGBE_AN_ERROR;
+
+ /* Check for a supported mode, otherwise restart in a different one */
+ link_support = amd_xgbe_phy_in_kr_mode(phydev) ? 0x80 : 0x20;
+ if (!(ret & link_support))
+ return AMD_XGBE_AN_INCOMPAT_LINK;
+
+ /* Check Extended Next Page support */
+ ad_reg = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE);
+ if (ad_reg < 0)
+ return AMD_XGBE_AN_ERROR;
+
+ lp_reg = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_LPA);
+ if (lp_reg < 0)
+ return AMD_XGBE_AN_ERROR;
+
+ return ((ad_reg & XNP_NP_EXCHANGE) || (lp_reg & XNP_NP_EXCHANGE)) ?
+ amd_xgbe_an_tx_xnp(phydev, state) :
+ amd_xgbe_an_tx_training(phydev, state);
+}
+
+static enum amd_xgbe_phy_an amd_xgbe_an_rx_xnp(struct phy_device *phydev,
+ enum amd_xgbe_phy_rx *state)
+{
+ int ad_reg, lp_reg;
+
+ /* Check Extended Next Page support */
+ ad_reg = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_XNP);
+ if (ad_reg < 0)
+ return AMD_XGBE_AN_ERROR;
+
+ lp_reg = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_LPX);
+ if (lp_reg < 0)
+ return AMD_XGBE_AN_ERROR;
+
+ return ((ad_reg & XNP_NP_EXCHANGE) || (lp_reg & XNP_NP_EXCHANGE)) ?
+ amd_xgbe_an_tx_xnp(phydev, state) :
+ amd_xgbe_an_tx_training(phydev, state);
+}
+
+static enum amd_xgbe_phy_an amd_xgbe_an_page_received(struct phy_device *phydev)
+{
+ struct amd_xgbe_phy_priv *priv = phydev->priv;
+ enum amd_xgbe_phy_rx *state;
+ unsigned long an_timeout;
+ int ret;
+
+ if (!priv->an_start) {
+ priv->an_start = jiffies;
+ } else {
+ an_timeout = priv->an_start +
+ msecs_to_jiffies(XGBE_AN_MS_TIMEOUT);
+ if (time_after(jiffies, an_timeout)) {
+ /* Auto-negotiation timed out, reset state */
+ priv->kr_state = AMD_XGBE_RX_BPA;
+ priv->kx_state = AMD_XGBE_RX_BPA;
+
+ priv->an_start = jiffies;
+ }
+ }
+
+ state = amd_xgbe_phy_in_kr_mode(phydev) ? &priv->kr_state
+ : &priv->kx_state;
+
+ switch (*state) {
+ case AMD_XGBE_RX_BPA:
+ ret = amd_xgbe_an_rx_bpa(phydev, state);
+ break;
+
+ case AMD_XGBE_RX_XNP:
+ ret = amd_xgbe_an_rx_xnp(phydev, state);
+ break;
+
+ default:
+ ret = AMD_XGBE_AN_ERROR;
+ }
+
+ return ret;
+}
+
+static enum amd_xgbe_phy_an amd_xgbe_an_incompat_link(struct phy_device *phydev)
+{
+ struct amd_xgbe_phy_priv *priv = phydev->priv;
+ int ret;
+
+ /* Be sure we aren't looping trying to negotiate */
+ if (amd_xgbe_phy_in_kr_mode(phydev)) {
+ priv->kr_state = AMD_XGBE_RX_ERROR;
+
+ if (!(phydev->advertising & SUPPORTED_1000baseKX_Full) &&
+ !(phydev->advertising & SUPPORTED_2500baseX_Full))
+ return AMD_XGBE_AN_NO_LINK;
+
+ if (priv->kx_state != AMD_XGBE_RX_BPA)
+ return AMD_XGBE_AN_NO_LINK;
+ } else {
+ priv->kx_state = AMD_XGBE_RX_ERROR;
+
+ if (!(phydev->advertising & SUPPORTED_10000baseKR_Full))
+ return AMD_XGBE_AN_NO_LINK;
+
+ if (priv->kr_state != AMD_XGBE_RX_BPA)
+ return AMD_XGBE_AN_NO_LINK;
+ }
+
+ ret = amd_xgbe_phy_disable_an(phydev);
+ if (ret)
+ return AMD_XGBE_AN_ERROR;
+
+ ret = amd_xgbe_phy_switch_mode(phydev);
+ if (ret)
+ return AMD_XGBE_AN_ERROR;
+
+ ret = amd_xgbe_phy_restart_an(phydev);
+ if (ret)
+ return AMD_XGBE_AN_ERROR;
+
+ return AMD_XGBE_AN_INCOMPAT_LINK;
+}
+
+static irqreturn_t amd_xgbe_an_isr(int irq, void *data)
+{
+ struct amd_xgbe_phy_priv *priv = (struct amd_xgbe_phy_priv *)data;
+
+ /* Interrupt reason must be read and cleared outside of IRQ context */
+ disable_irq_nosync(priv->an_irq);
+
+ queue_work(priv->an_workqueue, &priv->an_irq_work);
+
+ return IRQ_HANDLED;
+}
+
+static void amd_xgbe_an_irq_work(struct work_struct *work)
+{
+ struct amd_xgbe_phy_priv *priv = container_of(work,
+ struct amd_xgbe_phy_priv,
+ an_irq_work);
+
+ /* Avoid a race between enabling the IRQ and exiting the work by
+ * waiting for the work to finish and then queueing it
+ */
+ flush_work(&priv->an_work);
+ queue_work(priv->an_workqueue, &priv->an_work);
+}
+
+static void amd_xgbe_an_state_machine(struct work_struct *work)
+{
+ struct amd_xgbe_phy_priv *priv = container_of(work,
+ struct amd_xgbe_phy_priv,
+ an_work);
+ struct phy_device *phydev = priv->phydev;
+ enum amd_xgbe_phy_an cur_state = priv->an_state;
+ int int_reg, int_mask;
+
+ mutex_lock(&priv->an_mutex);
+
+ /* Read the interrupt */
+ int_reg = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_INT);
+ if (!int_reg)
+ goto out;
+
+next_int:
+ if (int_reg < 0) {
+ priv->an_state = AMD_XGBE_AN_ERROR;
+ int_mask = XGBE_AN_INT_MASK;
+ } else if (int_reg & XGBE_AN_PG_RCV) {
+ priv->an_state = AMD_XGBE_AN_PAGE_RECEIVED;
+ int_mask = XGBE_AN_PG_RCV;
+ } else if (int_reg & XGBE_AN_INC_LINK) {
+ priv->an_state = AMD_XGBE_AN_INCOMPAT_LINK;
+ int_mask = XGBE_AN_INC_LINK;
+ } else if (int_reg & XGBE_AN_INT_CMPLT) {
+ priv->an_state = AMD_XGBE_AN_COMPLETE;
+ int_mask = XGBE_AN_INT_CMPLT;
+ } else {
+ priv->an_state = AMD_XGBE_AN_ERROR;
+ int_mask = 0;
+ }
+
+ /* Clear the interrupt to be processed */
+ int_reg &= ~int_mask;
+ phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_INT, int_reg);
+
+ priv->an_result = priv->an_state;
+
+again:
+ cur_state = priv->an_state;
+
+ switch (priv->an_state) {
+ case AMD_XGBE_AN_READY:
+ priv->an_supported = 0;
+ break;
+
+ case AMD_XGBE_AN_PAGE_RECEIVED:
+ priv->an_state = amd_xgbe_an_page_received(phydev);
+ priv->an_supported++;
+ break;
+
+ case AMD_XGBE_AN_INCOMPAT_LINK:
+ priv->an_supported = 0;
+ priv->parallel_detect = 0;
+ priv->an_state = amd_xgbe_an_incompat_link(phydev);
+ break;
+
+ case AMD_XGBE_AN_COMPLETE:
+ priv->parallel_detect = priv->an_supported ? 0 : 1;
+ netdev_dbg(phydev->attached_dev, "%s successful\n",
+ priv->an_supported ? "Auto negotiation"
+ : "Parallel detection");
+ break;
+
+ case AMD_XGBE_AN_NO_LINK:
+ break;
+
+ default:
+ priv->an_state = AMD_XGBE_AN_ERROR;
+ }
+
+ if (priv->an_state == AMD_XGBE_AN_NO_LINK) {
+ int_reg = 0;
+ phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_INT, 0);
+ } else if (priv->an_state == AMD_XGBE_AN_ERROR) {
+ netdev_err(phydev->attached_dev,
+ "error during auto-negotiation, state=%u\n",
+ cur_state);
+
+ int_reg = 0;
+ phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_INT, 0);
+ }
+
+ if (priv->an_state >= AMD_XGBE_AN_COMPLETE) {
+ priv->an_result = priv->an_state;
+ priv->an_state = AMD_XGBE_AN_READY;
+ priv->kr_state = AMD_XGBE_RX_BPA;
+ priv->kx_state = AMD_XGBE_RX_BPA;
+ priv->an_start = 0;
+ }
+
+ if (cur_state != priv->an_state)
+ goto again;
+
+ if (int_reg)
+ goto next_int;
+
+out:
+ enable_irq(priv->an_irq);
+
+ mutex_unlock(&priv->an_mutex);
+}
+
+static int amd_xgbe_an_init(struct phy_device *phydev)
+{
+ int ret;
+
+ /* Set up Advertisement register 3 first */
+ ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE + 2);
+ if (ret < 0)
+ return ret;
+
+ if (phydev->advertising & SUPPORTED_10000baseR_FEC)
+ ret |= 0xc000;
+ else
+ ret &= ~0xc000;
+
+ phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE + 2, ret);
+
+ /* Set up Advertisement register 2 next */
+ ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE + 1);
+ if (ret < 0)
+ return ret;
+
+ if (phydev->advertising & SUPPORTED_10000baseKR_Full)
+ ret |= 0x80;
+ else
+ ret &= ~0x80;
+
+ if ((phydev->advertising & SUPPORTED_1000baseKX_Full) ||
+ (phydev->advertising & SUPPORTED_2500baseX_Full))
+ ret |= 0x20;
+ else
+ ret &= ~0x20;
+
+ phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE + 1, ret);
+
+ /* Set up Advertisement register 1 last */
+ ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE);
+ if (ret < 0)
+ return ret;
+
+ if (phydev->advertising & SUPPORTED_Pause)
+ ret |= 0x400;
+ else
+ ret &= ~0x400;
+
+ if (phydev->advertising & SUPPORTED_Asym_Pause)
+ ret |= 0x800;
+ else
+ ret &= ~0x800;
+
+ /* We don't intend to perform XNP */
+ ret &= ~XNP_NP_EXCHANGE;
+
+ phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE, ret);
+
+ return 0;
+}
+
+static int amd_xgbe_phy_soft_reset(struct phy_device *phydev)
+{
+ int count, ret;
+
+ ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1);
+ if (ret < 0)
+ return ret;
+
+ ret |= MDIO_CTRL1_RESET;
+ phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1, ret);
+
+ count = 50;
+ do {
+ msleep(20);
+ ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1);
+ if (ret < 0)
+ return ret;
+ } while ((ret & MDIO_CTRL1_RESET) && --count);
+
+ if (ret & MDIO_CTRL1_RESET)
+ return -ETIMEDOUT;
+
+ /* Disable auto-negotiation for now */
+ ret = amd_xgbe_phy_disable_an(phydev);
+ if (ret < 0)
+ return ret;
+
+ /* Clear auto-negotiation interrupts */
+ phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_INT, 0);
+
+ return 0;
+}
+
+static int amd_xgbe_phy_config_init(struct phy_device *phydev)
+{
+ struct amd_xgbe_phy_priv *priv = phydev->priv;
+ struct net_device *netdev = phydev->attached_dev;
+ int ret;
+
+ if (!priv->an_irq_allocated) {
+ /* Allocate the auto-negotiation workqueue and interrupt */
+ snprintf(priv->an_irq_name, sizeof(priv->an_irq_name) - 1,
+ "%s-pcs", netdev_name(netdev));
+
+ priv->an_workqueue =
+ create_singlethread_workqueue(priv->an_irq_name);
+ if (!priv->an_workqueue) {
+ netdev_err(netdev, "phy workqueue creation failed\n");
+ return -ENOMEM;
+ }
+
+ ret = devm_request_irq(priv->dev, priv->an_irq,
+ amd_xgbe_an_isr, 0, priv->an_irq_name,
+ priv);
+ if (ret) {
+ netdev_err(netdev, "phy irq request failed\n");
+ destroy_workqueue(priv->an_workqueue);
+ return ret;
+ }
+
+ priv->an_irq_allocated = 1;
+ }
+
+ /* Set initial mode - call the mode setting routines
+ * directly to insure we are properly configured
+ */
+ if (amd_xgbe_phy_use_xgmii_mode(phydev))
+ ret = amd_xgbe_phy_xgmii_mode(phydev);
+ else if (amd_xgbe_phy_use_gmii_mode(phydev))
+ ret = amd_xgbe_phy_gmii_mode(phydev);
+ else if (amd_xgbe_phy_use_gmii_2500_mode(phydev))
+ ret = amd_xgbe_phy_gmii_2500_mode(phydev);
+ else
+ ret = -EINVAL;
+ if (ret < 0)
+ return ret;
+
+ /* Set up advertisement registers based on current settings */
+ ret = amd_xgbe_an_init(phydev);
+ if (ret)
+ return ret;
+
+ /* Enable auto-negotiation interrupts */
+ phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_INTMASK, 0x07);
+
+ return 0;
+}
+
+static int amd_xgbe_phy_setup_forced(struct phy_device *phydev)
+{
+ int ret;
+
+ /* Disable auto-negotiation */
+ ret = amd_xgbe_phy_disable_an(phydev);
+ if (ret < 0)
+ return ret;
+
+ /* Validate/Set specified speed */
+ switch (phydev->speed) {
+ case SPEED_10000:
+ ret = amd_xgbe_phy_set_mode(phydev, AMD_XGBE_MODE_KR);
+ break;
+
+ case SPEED_2500:
+ case SPEED_1000:
+ ret = amd_xgbe_phy_set_mode(phydev, AMD_XGBE_MODE_KX);
+ break;
+
+ default:
+ ret = -EINVAL;
+ }
+
+ if (ret < 0)
+ return ret;
+
+ /* Validate duplex mode */
+ if (phydev->duplex != DUPLEX_FULL)
+ return -EINVAL;
+
+ phydev->pause = 0;
+ phydev->asym_pause = 0;
+
+ return 0;
+}
+
+static int __amd_xgbe_phy_config_aneg(struct phy_device *phydev)
+{
+ struct amd_xgbe_phy_priv *priv = phydev->priv;
+ u32 mmd_mask = phydev->c45_ids.devices_in_package;
+ int ret;
+
+ if (phydev->autoneg != AUTONEG_ENABLE)
+ return amd_xgbe_phy_setup_forced(phydev);
+
+ /* Make sure we have the AN MMD present */
+ if (!(mmd_mask & MDIO_DEVS_AN))
+ return -EINVAL;
+
+ /* Disable auto-negotiation interrupt */
+ disable_irq(priv->an_irq);
+
+ /* Start auto-negotiation in a supported mode */
+ if (phydev->advertising & SUPPORTED_10000baseKR_Full)
+ ret = amd_xgbe_phy_set_mode(phydev, AMD_XGBE_MODE_KR);
+ else if ((phydev->advertising & SUPPORTED_1000baseKX_Full) ||
+ (phydev->advertising & SUPPORTED_2500baseX_Full))
+ ret = amd_xgbe_phy_set_mode(phydev, AMD_XGBE_MODE_KX);
+ else
+ ret = -EINVAL;
+ if (ret < 0) {
+ enable_irq(priv->an_irq);
+ return ret;
+ }
+
+ /* Disable and stop any in progress auto-negotiation */
+ ret = amd_xgbe_phy_disable_an(phydev);
+ if (ret < 0)
+ return ret;
+
+ /* Clear any auto-negotitation interrupts */
+ phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_INT, 0);
+
+ priv->an_result = AMD_XGBE_AN_READY;
+ priv->an_state = AMD_XGBE_AN_READY;
+ priv->kr_state = AMD_XGBE_RX_BPA;
+ priv->kx_state = AMD_XGBE_RX_BPA;
+
+ /* Re-enable auto-negotiation interrupt */
+ enable_irq(priv->an_irq);
+
+ /* Set up advertisement registers based on current settings */
+ ret = amd_xgbe_an_init(phydev);
+ if (ret)
+ return ret;
+
+ /* Enable and start auto-negotiation */
+ return amd_xgbe_phy_restart_an(phydev);
+}
+
+static int amd_xgbe_phy_config_aneg(struct phy_device *phydev)
+{
+ struct amd_xgbe_phy_priv *priv = phydev->priv;
+ int ret;
+
+ mutex_lock(&priv->an_mutex);
+
+ ret = __amd_xgbe_phy_config_aneg(phydev);
+
+ mutex_unlock(&priv->an_mutex);
+
+ return ret;
+}
+
+static int amd_xgbe_phy_aneg_done(struct phy_device *phydev)
+{
+ struct amd_xgbe_phy_priv *priv = phydev->priv;
+
+ return (priv->an_result == AMD_XGBE_AN_COMPLETE);
+}
+
+static int amd_xgbe_phy_update_link(struct phy_device *phydev)
+{
+ struct amd_xgbe_phy_priv *priv = phydev->priv;
+ int ret;
+
+ /* If we're doing auto-negotiation don't report link down */
+ if (priv->an_state != AMD_XGBE_AN_READY) {
+ phydev->link = 1;
+ return 0;
+ }
+
+ /* Link status is latched low, so read once to clear
+ * and then read again to get current state
+ */
+ ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_STAT1);
+ if (ret < 0)
+ return ret;
+
+ ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_STAT1);
+ if (ret < 0)
+ return ret;
+
+ phydev->link = (ret & MDIO_STAT1_LSTATUS) ? 1 : 0;
+
+ return 0;
+}
+
+static int amd_xgbe_phy_read_status(struct phy_device *phydev)
+{
+ struct amd_xgbe_phy_priv *priv = phydev->priv;
+ u32 mmd_mask = phydev->c45_ids.devices_in_package;
+ int ret, ad_ret, lp_ret;
+
+ ret = amd_xgbe_phy_update_link(phydev);
+ if (ret)
+ return ret;
+
+ if ((phydev->autoneg == AUTONEG_ENABLE) &&
+ !priv->parallel_detect) {
+ if (!(mmd_mask & MDIO_DEVS_AN))
+ return -EINVAL;
+
+ if (!amd_xgbe_phy_aneg_done(phydev))
+ return 0;
+
+ /* Compare Advertisement and Link Partner register 1 */
+ ad_ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE);
+ if (ad_ret < 0)
+ return ad_ret;
+ lp_ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_LPA);
+ if (lp_ret < 0)
+ return lp_ret;
+
+ ad_ret &= lp_ret;
+ phydev->pause = (ad_ret & 0x400) ? 1 : 0;
+ phydev->asym_pause = (ad_ret & 0x800) ? 1 : 0;
+
+ /* Compare Advertisement and Link Partner register 2 */
+ ad_ret = phy_read_mmd(phydev, MDIO_MMD_AN,
+ MDIO_AN_ADVERTISE + 1);
+ if (ad_ret < 0)
+ return ad_ret;
+ lp_ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_LPA + 1);
+ if (lp_ret < 0)
+ return lp_ret;
+
+ ad_ret &= lp_ret;
+ if (ad_ret & 0x80) {
+ phydev->speed = SPEED_10000;
+ ret = amd_xgbe_phy_set_mode(phydev, AMD_XGBE_MODE_KR);
+ if (ret)
+ return ret;
+ } else {
+ switch (priv->speed_set) {
+ case AMD_XGBE_PHY_SPEEDSET_1000_10000:
+ phydev->speed = SPEED_1000;
+ break;
+
+ case AMD_XGBE_PHY_SPEEDSET_2500_10000:
+ phydev->speed = SPEED_2500;
+ break;
+ }
+
+ ret = amd_xgbe_phy_set_mode(phydev, AMD_XGBE_MODE_KX);
+ if (ret)
+ return ret;
+ }
+
+ phydev->duplex = DUPLEX_FULL;
+ } else {
+ if (amd_xgbe_phy_in_kr_mode(phydev)) {
+ phydev->speed = SPEED_10000;
+ } else {
+ switch (priv->speed_set) {
+ case AMD_XGBE_PHY_SPEEDSET_1000_10000:
+ phydev->speed = SPEED_1000;
+ break;
+
+ case AMD_XGBE_PHY_SPEEDSET_2500_10000:
+ phydev->speed = SPEED_2500;
+ break;
+ }
+ }
+ phydev->duplex = DUPLEX_FULL;
+ phydev->pause = 0;
+ phydev->asym_pause = 0;
+ }
+
+ return 0;
+}
+
+static int amd_xgbe_phy_suspend(struct phy_device *phydev)
+{
+ struct amd_xgbe_phy_priv *priv = phydev->priv;
+ int ret;
+
+ mutex_lock(&phydev->lock);
+
+ ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1);
+ if (ret < 0)
+ goto unlock;
+
+ priv->lpm_ctrl = ret;
+
+ ret |= MDIO_CTRL1_LPOWER;
+ phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1, ret);
+
+ ret = 0;
+
+unlock:
+ mutex_unlock(&phydev->lock);
+
+ return ret;
+}
+
+static int amd_xgbe_phy_resume(struct phy_device *phydev)
+{
+ struct amd_xgbe_phy_priv *priv = phydev->priv;
+
+ mutex_lock(&phydev->lock);
+
+ priv->lpm_ctrl &= ~MDIO_CTRL1_LPOWER;
+ phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1, priv->lpm_ctrl);
+
+ mutex_unlock(&phydev->lock);
+
+ return 0;
+}
+
+static unsigned int amd_xgbe_phy_resource_count(struct platform_device *pdev,
+ unsigned int type)
+{
+ unsigned int count;
+ int i;
+
+ for (i = 0, count = 0; i < pdev->num_resources; i++) {
+ struct resource *r = &pdev->resource[i];
+
+ if (type == resource_type(r))
+ count++;
+ }
+
+ return count;
+}
+
+static int amd_xgbe_phy_probe(struct phy_device *phydev)
+{
+ struct amd_xgbe_phy_priv *priv;
+ struct platform_device *phy_pdev;
+ struct device *dev, *phy_dev;
+ unsigned int phy_resnum, phy_irqnum;
+ int ret;
+
+ if (!phydev->bus || !phydev->bus->parent)
+ return -EINVAL;
+
+ dev = phydev->bus->parent;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->pdev = to_platform_device(dev);
+ priv->adev = ACPI_COMPANION(dev);
+ priv->dev = dev;
+ priv->phydev = phydev;
+ mutex_init(&priv->an_mutex);
+ INIT_WORK(&priv->an_irq_work, amd_xgbe_an_irq_work);
+ INIT_WORK(&priv->an_work, amd_xgbe_an_state_machine);
+
+ if (!priv->adev || acpi_disabled) {
+ struct device_node *bus_node;
+ struct device_node *phy_node;
+
+ bus_node = priv->dev->of_node;
+ phy_node = of_parse_phandle(bus_node, "phy-handle", 0);
+ if (!phy_node) {
+ dev_err(dev, "unable to parse phy-handle\n");
+ ret = -EINVAL;
+ goto err_priv;
+ }
+
+ phy_pdev = of_find_device_by_node(phy_node);
+ of_node_put(phy_node);
+
+ if (!phy_pdev) {
+ dev_err(dev, "unable to obtain phy device\n");
+ ret = -EINVAL;
+ goto err_priv;
+ }
+
+ phy_resnum = 0;
+ phy_irqnum = 0;
+ } else {
+ /* In ACPI, the XGBE and PHY resources are the grouped
+ * together with the PHY resources at the end
+ */
+ phy_pdev = priv->pdev;
+ phy_resnum = amd_xgbe_phy_resource_count(phy_pdev,
+ IORESOURCE_MEM) - 3;
+ phy_irqnum = amd_xgbe_phy_resource_count(phy_pdev,
+ IORESOURCE_IRQ) - 1;
+ }
+ phy_dev = &phy_pdev->dev;
+
+ /* Get the device mmio areas */
+ priv->rxtx_res = platform_get_resource(phy_pdev, IORESOURCE_MEM,
+ phy_resnum++);
+ priv->rxtx_regs = devm_ioremap_resource(dev, priv->rxtx_res);
+ if (IS_ERR(priv->rxtx_regs)) {
+ dev_err(dev, "rxtx ioremap failed\n");
+ ret = PTR_ERR(priv->rxtx_regs);
+ goto err_put;
+ }
+
+ priv->sir0_res = platform_get_resource(phy_pdev, IORESOURCE_MEM,
+ phy_resnum++);
+ priv->sir0_regs = devm_ioremap_resource(dev, priv->sir0_res);
+ if (IS_ERR(priv->sir0_regs)) {
+ dev_err(dev, "sir0 ioremap failed\n");
+ ret = PTR_ERR(priv->sir0_regs);
+ goto err_rxtx;
+ }
+
+ priv->sir1_res = platform_get_resource(phy_pdev, IORESOURCE_MEM,
+ phy_resnum++);
+ priv->sir1_regs = devm_ioremap_resource(dev, priv->sir1_res);
+ if (IS_ERR(priv->sir1_regs)) {
+ dev_err(dev, "sir1 ioremap failed\n");
+ ret = PTR_ERR(priv->sir1_regs);
+ goto err_sir0;
+ }
+
+ /* Get the auto-negotiation interrupt */
+ ret = platform_get_irq(phy_pdev, phy_irqnum);
+ if (ret < 0) {
+ dev_err(dev, "platform_get_irq failed\n");
+ goto err_sir1;
+ }
+ priv->an_irq = ret;
+
+ /* Get the device speed set property */
+ ret = device_property_read_u32(phy_dev, XGBE_PHY_SPEEDSET_PROPERTY,
+ &priv->speed_set);
+ if (ret) {
+ dev_err(dev, "invalid %s property\n",
+ XGBE_PHY_SPEEDSET_PROPERTY);
+ goto err_sir1;
+ }
+
+ switch (priv->speed_set) {
+ case AMD_XGBE_PHY_SPEEDSET_1000_10000:
+ case AMD_XGBE_PHY_SPEEDSET_2500_10000:
+ break;
+ default:
+ dev_err(dev, "invalid %s property\n",
+ XGBE_PHY_SPEEDSET_PROPERTY);
+ ret = -EINVAL;
+ goto err_sir1;
+ }
+
+ if (device_property_present(phy_dev, XGBE_PHY_BLWC_PROPERTY)) {
+ ret = device_property_read_u32_array(phy_dev,
+ XGBE_PHY_BLWC_PROPERTY,
+ priv->serdes_blwc,
+ XGBE_PHY_SPEEDS);
+ if (ret) {
+ dev_err(dev, "invalid %s property\n",
+ XGBE_PHY_BLWC_PROPERTY);
+ goto err_sir1;
+ }
+ } else {
+ memcpy(priv->serdes_blwc, amd_xgbe_phy_serdes_blwc,
+ sizeof(priv->serdes_blwc));
+ }
+
+ if (device_property_present(phy_dev, XGBE_PHY_CDR_RATE_PROPERTY)) {
+ ret = device_property_read_u32_array(phy_dev,
+ XGBE_PHY_CDR_RATE_PROPERTY,
+ priv->serdes_cdr_rate,
+ XGBE_PHY_SPEEDS);
+ if (ret) {
+ dev_err(dev, "invalid %s property\n",
+ XGBE_PHY_CDR_RATE_PROPERTY);
+ goto err_sir1;
+ }
+ } else {
+ memcpy(priv->serdes_cdr_rate, amd_xgbe_phy_serdes_cdr_rate,
+ sizeof(priv->serdes_cdr_rate));
+ }
+
+ if (device_property_present(phy_dev, XGBE_PHY_PQ_SKEW_PROPERTY)) {
+ ret = device_property_read_u32_array(phy_dev,
+ XGBE_PHY_PQ_SKEW_PROPERTY,
+ priv->serdes_pq_skew,
+ XGBE_PHY_SPEEDS);
+ if (ret) {
+ dev_err(dev, "invalid %s property\n",
+ XGBE_PHY_PQ_SKEW_PROPERTY);
+ goto err_sir1;
+ }
+ } else {
+ memcpy(priv->serdes_pq_skew, amd_xgbe_phy_serdes_pq_skew,
+ sizeof(priv->serdes_pq_skew));
+ }
+
+ if (device_property_present(phy_dev, XGBE_PHY_TX_AMP_PROPERTY)) {
+ ret = device_property_read_u32_array(phy_dev,
+ XGBE_PHY_TX_AMP_PROPERTY,
+ priv->serdes_tx_amp,
+ XGBE_PHY_SPEEDS);
+ if (ret) {
+ dev_err(dev, "invalid %s property\n",
+ XGBE_PHY_TX_AMP_PROPERTY);
+ goto err_sir1;
+ }
+ } else {
+ memcpy(priv->serdes_tx_amp, amd_xgbe_phy_serdes_tx_amp,
+ sizeof(priv->serdes_tx_amp));
+ }
+
+ if (device_property_present(phy_dev, XGBE_PHY_DFE_CFG_PROPERTY)) {
+ ret = device_property_read_u32_array(phy_dev,
+ XGBE_PHY_DFE_CFG_PROPERTY,
+ priv->serdes_dfe_tap_cfg,
+ XGBE_PHY_SPEEDS);
+ if (ret) {
+ dev_err(dev, "invalid %s property\n",
+ XGBE_PHY_DFE_CFG_PROPERTY);
+ goto err_sir1;
+ }
+ } else {
+ memcpy(priv->serdes_dfe_tap_cfg,
+ amd_xgbe_phy_serdes_dfe_tap_cfg,
+ sizeof(priv->serdes_dfe_tap_cfg));
+ }
+
+ if (device_property_present(phy_dev, XGBE_PHY_DFE_ENA_PROPERTY)) {
+ ret = device_property_read_u32_array(phy_dev,
+ XGBE_PHY_DFE_ENA_PROPERTY,
+ priv->serdes_dfe_tap_ena,
+ XGBE_PHY_SPEEDS);
+ if (ret) {
+ dev_err(dev, "invalid %s property\n",
+ XGBE_PHY_DFE_ENA_PROPERTY);
+ goto err_sir1;
+ }
+ } else {
+ memcpy(priv->serdes_dfe_tap_ena,
+ amd_xgbe_phy_serdes_dfe_tap_ena,
+ sizeof(priv->serdes_dfe_tap_ena));
+ }
+
+ /* Initialize supported features */
+ phydev->supported = SUPPORTED_Autoneg;
+ phydev->supported |= SUPPORTED_Pause | SUPPORTED_Asym_Pause;
+ phydev->supported |= SUPPORTED_Backplane;
+ phydev->supported |= SUPPORTED_10000baseKR_Full;
+ switch (priv->speed_set) {
+ case AMD_XGBE_PHY_SPEEDSET_1000_10000:
+ phydev->supported |= SUPPORTED_1000baseKX_Full;
+ break;
+ case AMD_XGBE_PHY_SPEEDSET_2500_10000:
+ phydev->supported |= SUPPORTED_2500baseX_Full;
+ break;
+ }
+
+ ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_FEC_ABILITY);
+ if (ret < 0)
+ return ret;
+ priv->fec_ability = ret & XGBE_PHY_FEC_MASK;
+ if (priv->fec_ability & XGBE_PHY_FEC_ENABLE)
+ phydev->supported |= SUPPORTED_10000baseR_FEC;
+
+ phydev->advertising = phydev->supported;
+
+ phydev->priv = priv;
+
+ if (!priv->adev || acpi_disabled)
+ platform_device_put(phy_pdev);
+
+ return 0;
+
+err_sir1:
+ devm_iounmap(dev, priv->sir1_regs);
+ devm_release_mem_region(dev, priv->sir1_res->start,
+ resource_size(priv->sir1_res));
+
+err_sir0:
+ devm_iounmap(dev, priv->sir0_regs);
+ devm_release_mem_region(dev, priv->sir0_res->start,
+ resource_size(priv->sir0_res));
+
+err_rxtx:
+ devm_iounmap(dev, priv->rxtx_regs);
+ devm_release_mem_region(dev, priv->rxtx_res->start,
+ resource_size(priv->rxtx_res));
+
+err_put:
+ if (!priv->adev || acpi_disabled)
+ platform_device_put(phy_pdev);
+
+err_priv:
+ devm_kfree(dev, priv);
+
+ return ret;
+}
+
+static void amd_xgbe_phy_remove(struct phy_device *phydev)
+{
+ struct amd_xgbe_phy_priv *priv = phydev->priv;
+ struct device *dev = priv->dev;
+
+ if (priv->an_irq_allocated) {
+ devm_free_irq(dev, priv->an_irq, priv);
+
+ flush_workqueue(priv->an_workqueue);
+ destroy_workqueue(priv->an_workqueue);
+ }
+
+ /* Release resources */
+ devm_iounmap(dev, priv->sir1_regs);
+ devm_release_mem_region(dev, priv->sir1_res->start,
+ resource_size(priv->sir1_res));
+
+ devm_iounmap(dev, priv->sir0_regs);
+ devm_release_mem_region(dev, priv->sir0_res->start,
+ resource_size(priv->sir0_res));
+
+ devm_iounmap(dev, priv->rxtx_regs);
+ devm_release_mem_region(dev, priv->rxtx_res->start,
+ resource_size(priv->rxtx_res));
+
+ devm_kfree(dev, priv);
+}
+
+static int amd_xgbe_match_phy_device(struct phy_device *phydev)
+{
+ return phydev->c45_ids.device_ids[MDIO_MMD_PCS] == XGBE_PHY_ID;
+}
+
+static struct phy_driver amd_xgbe_phy_driver[] = {
+ {
+ .phy_id = XGBE_PHY_ID,
+ .phy_id_mask = XGBE_PHY_MASK,
+ .name = "AMD XGBE PHY",
+ .features = 0,
+ .flags = PHY_IS_INTERNAL,
+ .probe = amd_xgbe_phy_probe,
+ .remove = amd_xgbe_phy_remove,
+ .soft_reset = amd_xgbe_phy_soft_reset,
+ .config_init = amd_xgbe_phy_config_init,
+ .suspend = amd_xgbe_phy_suspend,
+ .resume = amd_xgbe_phy_resume,
+ .config_aneg = amd_xgbe_phy_config_aneg,
+ .aneg_done = amd_xgbe_phy_aneg_done,
+ .read_status = amd_xgbe_phy_read_status,
+ .match_phy_device = amd_xgbe_match_phy_device,
+ .driver = {
+ .owner = THIS_MODULE,
+ },
+ },
+};
+
+module_phy_driver(amd_xgbe_phy_driver);
+
+static struct mdio_device_id __maybe_unused amd_xgbe_phy_ids[] = {
+ { XGBE_PHY_ID, XGBE_PHY_MASK },
+ { }
+};
+MODULE_DEVICE_TABLE(mdio, amd_xgbe_phy_ids);
diff --git a/kernel/drivers/net/phy/amd.c b/kernel/drivers/net/phy/amd.c
new file mode 100644
index 000000000..65a488f82
--- /dev/null
+++ b/kernel/drivers/net/phy/amd.c
@@ -0,0 +1,85 @@
+/*
+ * Driver for AMD am79c PHYs
+ *
+ * Author: Heiko Schocher <hs@denx.de>
+ *
+ * Copyright (c) 2011 DENX Software Engineering GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mii.h>
+#include <linux/phy.h>
+
+#define PHY_ID_AM79C874 0x0022561b
+
+#define MII_AM79C_IR 17 /* Interrupt Status/Control Register */
+#define MII_AM79C_IR_EN_LINK 0x0400 /* IR enable Linkstate */
+#define MII_AM79C_IR_EN_ANEG 0x0100 /* IR enable Aneg Complete */
+#define MII_AM79C_IR_IMASK_INIT (MII_AM79C_IR_EN_LINK | MII_AM79C_IR_EN_ANEG)
+
+MODULE_DESCRIPTION("AMD PHY driver");
+MODULE_AUTHOR("Heiko Schocher <hs@denx.de>");
+MODULE_LICENSE("GPL");
+
+static int am79c_ack_interrupt(struct phy_device *phydev)
+{
+ int err;
+
+ err = phy_read(phydev, MII_BMSR);
+ if (err < 0)
+ return err;
+
+ err = phy_read(phydev, MII_AM79C_IR);
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+static int am79c_config_init(struct phy_device *phydev)
+{
+ return 0;
+}
+
+static int am79c_config_intr(struct phy_device *phydev)
+{
+ int err;
+
+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+ err = phy_write(phydev, MII_AM79C_IR, MII_AM79C_IR_IMASK_INIT);
+ else
+ err = phy_write(phydev, MII_AM79C_IR, 0);
+
+ return err;
+}
+
+static struct phy_driver am79c_driver[] = { {
+ .phy_id = PHY_ID_AM79C874,
+ .name = "AM79C874",
+ .phy_id_mask = 0xfffffff0,
+ .features = PHY_BASIC_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = am79c_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = am79c_ack_interrupt,
+ .config_intr = am79c_config_intr,
+ .driver = { .owner = THIS_MODULE,},
+} };
+
+module_phy_driver(am79c_driver);
+
+static struct mdio_device_id __maybe_unused amd_tbl[] = {
+ { PHY_ID_AM79C874, 0xfffffff0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(mdio, amd_tbl);
diff --git a/kernel/drivers/net/phy/at803x.c b/kernel/drivers/net/phy/at803x.c
new file mode 100644
index 000000000..fabf11d32
--- /dev/null
+++ b/kernel/drivers/net/phy/at803x.c
@@ -0,0 +1,365 @@
+/*
+ * drivers/net/phy/at803x.c
+ *
+ * Driver for Atheros 803x PHY
+ *
+ * Author: Matus Ujhelyi <ujhelyi.m@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/phy.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/of_gpio.h>
+#include <linux/gpio/consumer.h>
+
+#define AT803X_INTR_ENABLE 0x12
+#define AT803X_INTR_STATUS 0x13
+#define AT803X_SMART_SPEED 0x14
+#define AT803X_LED_CONTROL 0x18
+#define AT803X_WOL_ENABLE 0x01
+#define AT803X_DEVICE_ADDR 0x03
+#define AT803X_LOC_MAC_ADDR_0_15_OFFSET 0x804C
+#define AT803X_LOC_MAC_ADDR_16_31_OFFSET 0x804B
+#define AT803X_LOC_MAC_ADDR_32_47_OFFSET 0x804A
+#define AT803X_MMD_ACCESS_CONTROL 0x0D
+#define AT803X_MMD_ACCESS_CONTROL_DATA 0x0E
+#define AT803X_FUNC_DATA 0x4003
+#define AT803X_INER 0x0012
+#define AT803X_INER_INIT 0xec00
+#define AT803X_INSR 0x0013
+#define AT803X_DEBUG_ADDR 0x1D
+#define AT803X_DEBUG_DATA 0x1E
+#define AT803X_DEBUG_SYSTEM_MODE_CTRL 0x05
+#define AT803X_DEBUG_RGMII_TX_CLK_DLY BIT(8)
+
+#define ATH8030_PHY_ID 0x004dd076
+#define ATH8031_PHY_ID 0x004dd074
+#define ATH8035_PHY_ID 0x004dd072
+
+MODULE_DESCRIPTION("Atheros 803x PHY driver");
+MODULE_AUTHOR("Matus Ujhelyi");
+MODULE_LICENSE("GPL");
+
+struct at803x_priv {
+ bool phy_reset:1;
+ struct gpio_desc *gpiod_reset;
+};
+
+struct at803x_context {
+ u16 bmcr;
+ u16 advertise;
+ u16 control1000;
+ u16 int_enable;
+ u16 smart_speed;
+ u16 led_control;
+};
+
+/* save relevant PHY registers to private copy */
+static void at803x_context_save(struct phy_device *phydev,
+ struct at803x_context *context)
+{
+ context->bmcr = phy_read(phydev, MII_BMCR);
+ context->advertise = phy_read(phydev, MII_ADVERTISE);
+ context->control1000 = phy_read(phydev, MII_CTRL1000);
+ context->int_enable = phy_read(phydev, AT803X_INTR_ENABLE);
+ context->smart_speed = phy_read(phydev, AT803X_SMART_SPEED);
+ context->led_control = phy_read(phydev, AT803X_LED_CONTROL);
+}
+
+/* restore relevant PHY registers from private copy */
+static void at803x_context_restore(struct phy_device *phydev,
+ const struct at803x_context *context)
+{
+ phy_write(phydev, MII_BMCR, context->bmcr);
+ phy_write(phydev, MII_ADVERTISE, context->advertise);
+ phy_write(phydev, MII_CTRL1000, context->control1000);
+ phy_write(phydev, AT803X_INTR_ENABLE, context->int_enable);
+ phy_write(phydev, AT803X_SMART_SPEED, context->smart_speed);
+ phy_write(phydev, AT803X_LED_CONTROL, context->led_control);
+}
+
+static int at803x_set_wol(struct phy_device *phydev,
+ struct ethtool_wolinfo *wol)
+{
+ struct net_device *ndev = phydev->attached_dev;
+ const u8 *mac;
+ int ret;
+ u32 value;
+ unsigned int i, offsets[] = {
+ AT803X_LOC_MAC_ADDR_32_47_OFFSET,
+ AT803X_LOC_MAC_ADDR_16_31_OFFSET,
+ AT803X_LOC_MAC_ADDR_0_15_OFFSET,
+ };
+
+ if (!ndev)
+ return -ENODEV;
+
+ if (wol->wolopts & WAKE_MAGIC) {
+ mac = (const u8 *) ndev->dev_addr;
+
+ if (!is_valid_ether_addr(mac))
+ return -EFAULT;
+
+ for (i = 0; i < 3; i++) {
+ phy_write(phydev, AT803X_MMD_ACCESS_CONTROL,
+ AT803X_DEVICE_ADDR);
+ phy_write(phydev, AT803X_MMD_ACCESS_CONTROL_DATA,
+ offsets[i]);
+ phy_write(phydev, AT803X_MMD_ACCESS_CONTROL,
+ AT803X_FUNC_DATA);
+ phy_write(phydev, AT803X_MMD_ACCESS_CONTROL_DATA,
+ mac[(i * 2) + 1] | (mac[(i * 2)] << 8));
+ }
+
+ value = phy_read(phydev, AT803X_INTR_ENABLE);
+ value |= AT803X_WOL_ENABLE;
+ ret = phy_write(phydev, AT803X_INTR_ENABLE, value);
+ if (ret)
+ return ret;
+ value = phy_read(phydev, AT803X_INTR_STATUS);
+ } else {
+ value = phy_read(phydev, AT803X_INTR_ENABLE);
+ value &= (~AT803X_WOL_ENABLE);
+ ret = phy_write(phydev, AT803X_INTR_ENABLE, value);
+ if (ret)
+ return ret;
+ value = phy_read(phydev, AT803X_INTR_STATUS);
+ }
+
+ return ret;
+}
+
+static void at803x_get_wol(struct phy_device *phydev,
+ struct ethtool_wolinfo *wol)
+{
+ u32 value;
+
+ wol->supported = WAKE_MAGIC;
+ wol->wolopts = 0;
+
+ value = phy_read(phydev, AT803X_INTR_ENABLE);
+ if (value & AT803X_WOL_ENABLE)
+ wol->wolopts |= WAKE_MAGIC;
+}
+
+static int at803x_suspend(struct phy_device *phydev)
+{
+ int value;
+ int wol_enabled;
+
+ mutex_lock(&phydev->lock);
+
+ value = phy_read(phydev, AT803X_INTR_ENABLE);
+ wol_enabled = value & AT803X_WOL_ENABLE;
+
+ value = phy_read(phydev, MII_BMCR);
+
+ if (wol_enabled)
+ value |= BMCR_ISOLATE;
+ else
+ value |= BMCR_PDOWN;
+
+ phy_write(phydev, MII_BMCR, value);
+
+ mutex_unlock(&phydev->lock);
+
+ return 0;
+}
+
+static int at803x_resume(struct phy_device *phydev)
+{
+ int value;
+
+ mutex_lock(&phydev->lock);
+
+ value = phy_read(phydev, MII_BMCR);
+ value &= ~(BMCR_PDOWN | BMCR_ISOLATE);
+ phy_write(phydev, MII_BMCR, value);
+
+ mutex_unlock(&phydev->lock);
+
+ return 0;
+}
+
+static int at803x_probe(struct phy_device *phydev)
+{
+ struct device *dev = &phydev->dev;
+ struct at803x_priv *priv;
+ struct gpio_desc *gpiod_reset;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ gpiod_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
+ if (IS_ERR(gpiod_reset))
+ return PTR_ERR(gpiod_reset);
+
+ priv->gpiod_reset = gpiod_reset;
+
+ phydev->priv = priv;
+
+ return 0;
+}
+
+static int at803x_config_init(struct phy_device *phydev)
+{
+ int ret;
+
+ ret = genphy_config_init(phydev);
+ if (ret < 0)
+ return ret;
+
+ if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) {
+ ret = phy_write(phydev, AT803X_DEBUG_ADDR,
+ AT803X_DEBUG_SYSTEM_MODE_CTRL);
+ if (ret)
+ return ret;
+ ret = phy_write(phydev, AT803X_DEBUG_DATA,
+ AT803X_DEBUG_RGMII_TX_CLK_DLY);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int at803x_ack_interrupt(struct phy_device *phydev)
+{
+ int err;
+
+ err = phy_read(phydev, AT803X_INSR);
+
+ return (err < 0) ? err : 0;
+}
+
+static int at803x_config_intr(struct phy_device *phydev)
+{
+ int err;
+ int value;
+
+ value = phy_read(phydev, AT803X_INER);
+
+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+ err = phy_write(phydev, AT803X_INER,
+ value | AT803X_INER_INIT);
+ else
+ err = phy_write(phydev, AT803X_INER, 0);
+
+ return err;
+}
+
+static void at803x_link_change_notify(struct phy_device *phydev)
+{
+ struct at803x_priv *priv = phydev->priv;
+
+ /*
+ * Conduct a hardware reset for AT8030 every time a link loss is
+ * signalled. This is necessary to circumvent a hardware bug that
+ * occurs when the cable is unplugged while TX packets are pending
+ * in the FIFO. In such cases, the FIFO enters an error mode it
+ * cannot recover from by software.
+ */
+ if (phydev->drv->phy_id == ATH8030_PHY_ID) {
+ if (phydev->state == PHY_NOLINK) {
+ if (priv->gpiod_reset && !priv->phy_reset) {
+ struct at803x_context context;
+
+ at803x_context_save(phydev, &context);
+
+ gpiod_set_value(priv->gpiod_reset, 0);
+ msleep(1);
+ gpiod_set_value(priv->gpiod_reset, 1);
+ msleep(1);
+
+ at803x_context_restore(phydev, &context);
+
+ dev_dbg(&phydev->dev, "%s(): phy was reset\n",
+ __func__);
+ priv->phy_reset = true;
+ }
+ } else {
+ priv->phy_reset = false;
+ }
+ }
+}
+
+static struct phy_driver at803x_driver[] = {
+{
+ /* ATHEROS 8035 */
+ .phy_id = ATH8035_PHY_ID,
+ .name = "Atheros 8035 ethernet",
+ .phy_id_mask = 0xffffffef,
+ .probe = at803x_probe,
+ .config_init = at803x_config_init,
+ .link_change_notify = at803x_link_change_notify,
+ .set_wol = at803x_set_wol,
+ .get_wol = at803x_get_wol,
+ .suspend = at803x_suspend,
+ .resume = at803x_resume,
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .driver = {
+ .owner = THIS_MODULE,
+ },
+}, {
+ /* ATHEROS 8030 */
+ .phy_id = ATH8030_PHY_ID,
+ .name = "Atheros 8030 ethernet",
+ .phy_id_mask = 0xffffffef,
+ .probe = at803x_probe,
+ .config_init = at803x_config_init,
+ .link_change_notify = at803x_link_change_notify,
+ .set_wol = at803x_set_wol,
+ .get_wol = at803x_get_wol,
+ .suspend = at803x_suspend,
+ .resume = at803x_resume,
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .driver = {
+ .owner = THIS_MODULE,
+ },
+}, {
+ /* ATHEROS 8031 */
+ .phy_id = ATH8031_PHY_ID,
+ .name = "Atheros 8031 ethernet",
+ .phy_id_mask = 0xffffffef,
+ .probe = at803x_probe,
+ .config_init = at803x_config_init,
+ .link_change_notify = at803x_link_change_notify,
+ .set_wol = at803x_set_wol,
+ .get_wol = at803x_get_wol,
+ .suspend = at803x_suspend,
+ .resume = at803x_resume,
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = &at803x_ack_interrupt,
+ .config_intr = &at803x_config_intr,
+ .driver = {
+ .owner = THIS_MODULE,
+ },
+} };
+
+module_phy_driver(at803x_driver);
+
+static struct mdio_device_id __maybe_unused atheros_tbl[] = {
+ { ATH8030_PHY_ID, 0xffffffef },
+ { ATH8031_PHY_ID, 0xffffffef },
+ { ATH8035_PHY_ID, 0xffffffef },
+ { }
+};
+
+MODULE_DEVICE_TABLE(mdio, atheros_tbl);
diff --git a/kernel/drivers/net/phy/bcm63xx.c b/kernel/drivers/net/phy/bcm63xx.c
new file mode 100644
index 000000000..830ec31f9
--- /dev/null
+++ b/kernel/drivers/net/phy/bcm63xx.c
@@ -0,0 +1,111 @@
+/*
+ * Driver for Broadcom 63xx SOCs integrated PHYs
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/phy.h>
+
+#define MII_BCM63XX_IR 0x1a /* interrupt register */
+#define MII_BCM63XX_IR_EN 0x4000 /* global interrupt enable */
+#define MII_BCM63XX_IR_DUPLEX 0x0800 /* duplex changed */
+#define MII_BCM63XX_IR_SPEED 0x0400 /* speed changed */
+#define MII_BCM63XX_IR_LINK 0x0200 /* link changed */
+#define MII_BCM63XX_IR_GMASK 0x0100 /* global interrupt mask */
+
+MODULE_DESCRIPTION("Broadcom 63xx internal PHY driver");
+MODULE_AUTHOR("Maxime Bizon <mbizon@freebox.fr>");
+MODULE_LICENSE("GPL");
+
+static int bcm63xx_config_init(struct phy_device *phydev)
+{
+ int reg, err;
+
+ reg = phy_read(phydev, MII_BCM63XX_IR);
+ if (reg < 0)
+ return reg;
+
+ /* Mask interrupts globally. */
+ reg |= MII_BCM63XX_IR_GMASK;
+ err = phy_write(phydev, MII_BCM63XX_IR, reg);
+ if (err < 0)
+ return err;
+
+ /* Unmask events we are interested in */
+ reg = ~(MII_BCM63XX_IR_DUPLEX |
+ MII_BCM63XX_IR_SPEED |
+ MII_BCM63XX_IR_LINK) |
+ MII_BCM63XX_IR_EN;
+ return phy_write(phydev, MII_BCM63XX_IR, reg);
+}
+
+static int bcm63xx_ack_interrupt(struct phy_device *phydev)
+{
+ int reg;
+
+ /* Clear pending interrupts. */
+ reg = phy_read(phydev, MII_BCM63XX_IR);
+ if (reg < 0)
+ return reg;
+
+ return 0;
+}
+
+static int bcm63xx_config_intr(struct phy_device *phydev)
+{
+ int reg, err;
+
+ reg = phy_read(phydev, MII_BCM63XX_IR);
+ if (reg < 0)
+ return reg;
+
+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+ reg &= ~MII_BCM63XX_IR_GMASK;
+ else
+ reg |= MII_BCM63XX_IR_GMASK;
+
+ err = phy_write(phydev, MII_BCM63XX_IR, reg);
+ return err;
+}
+
+static struct phy_driver bcm63xx_driver[] = {
+{
+ .phy_id = 0x00406000,
+ .phy_id_mask = 0xfffffc00,
+ .name = "Broadcom BCM63XX (1)",
+ /* ASYM_PAUSE bit is marked RO in datasheet, so don't cheat */
+ .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause),
+ .flags = PHY_HAS_INTERRUPT | PHY_IS_INTERNAL,
+ .config_init = bcm63xx_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = bcm63xx_ack_interrupt,
+ .config_intr = bcm63xx_config_intr,
+ .driver = { .owner = THIS_MODULE },
+}, {
+ /* same phy as above, with just a different OUI */
+ .phy_id = 0x002bdc00,
+ .phy_id_mask = 0xfffffc00,
+ .name = "Broadcom BCM63XX (2)",
+ .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause),
+ .flags = PHY_HAS_INTERRUPT | PHY_IS_INTERNAL,
+ .config_init = bcm63xx_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = bcm63xx_ack_interrupt,
+ .config_intr = bcm63xx_config_intr,
+ .driver = { .owner = THIS_MODULE },
+} };
+
+module_phy_driver(bcm63xx_driver);
+
+static struct mdio_device_id __maybe_unused bcm63xx_tbl[] = {
+ { 0x00406000, 0xfffffc00 },
+ { 0x002bdc00, 0xfffffc00 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(mdio, bcm63xx_tbl);
diff --git a/kernel/drivers/net/phy/bcm7xxx.c b/kernel/drivers/net/phy/bcm7xxx.c
new file mode 100644
index 000000000..b5dc59de0
--- /dev/null
+++ b/kernel/drivers/net/phy/bcm7xxx.c
@@ -0,0 +1,474 @@
+/*
+ * Broadcom BCM7xxx internal transceivers support.
+ *
+ * Copyright (C) 2014, Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/phy.h>
+#include <linux/delay.h>
+#include <linux/bitops.h>
+#include <linux/brcmphy.h>
+#include <linux/mdio.h>
+
+/* Broadcom BCM7xxx internal PHY registers */
+#define MII_BCM7XXX_CHANNEL_WIDTH 0x2000
+
+/* 40nm only register definitions */
+#define MII_BCM7XXX_100TX_AUX_CTL 0x10
+#define MII_BCM7XXX_100TX_FALSE_CAR 0x13
+#define MII_BCM7XXX_100TX_DISC 0x14
+#define MII_BCM7XXX_AUX_MODE 0x1d
+#define MII_BCM7XX_64CLK_MDIO BIT(12)
+#define MII_BCM7XXX_CORE_BASE1E 0x1e
+#define MII_BCM7XXX_TEST 0x1f
+#define MII_BCM7XXX_SHD_MODE_2 BIT(2)
+
+/* 28nm only register definitions */
+#define MISC_ADDR(base, channel) base, channel
+
+#define DSP_TAP10 MISC_ADDR(0x0a, 0)
+#define PLL_PLLCTRL_1 MISC_ADDR(0x32, 1)
+#define PLL_PLLCTRL_2 MISC_ADDR(0x32, 2)
+#define PLL_PLLCTRL_4 MISC_ADDR(0x33, 0)
+
+#define AFE_RXCONFIG_0 MISC_ADDR(0x38, 0)
+#define AFE_RXCONFIG_1 MISC_ADDR(0x38, 1)
+#define AFE_RXCONFIG_2 MISC_ADDR(0x38, 2)
+#define AFE_RX_LP_COUNTER MISC_ADDR(0x38, 3)
+#define AFE_TX_CONFIG MISC_ADDR(0x39, 0)
+#define AFE_VDCA_ICTRL_0 MISC_ADDR(0x39, 1)
+#define AFE_VDAC_OTHERS_0 MISC_ADDR(0x39, 3)
+#define AFE_HPF_TRIM_OTHERS MISC_ADDR(0x3a, 0)
+
+#define CORE_EXPB0 0xb0
+
+static void phy_write_exp(struct phy_device *phydev,
+ u16 reg, u16 value)
+{
+ phy_write(phydev, MII_BCM54XX_EXP_SEL, MII_BCM54XX_EXP_SEL_ER | reg);
+ phy_write(phydev, MII_BCM54XX_EXP_DATA, value);
+}
+
+static void phy_write_misc(struct phy_device *phydev,
+ u16 reg, u16 chl, u16 value)
+{
+ int tmp;
+
+ phy_write(phydev, MII_BCM54XX_AUX_CTL, MII_BCM54XX_AUXCTL_SHDWSEL_MISC);
+
+ tmp = phy_read(phydev, MII_BCM54XX_AUX_CTL);
+ tmp |= MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA;
+ phy_write(phydev, MII_BCM54XX_AUX_CTL, tmp);
+
+ tmp = (chl * MII_BCM7XXX_CHANNEL_WIDTH) | reg;
+ phy_write(phydev, MII_BCM54XX_EXP_SEL, tmp);
+
+ phy_write(phydev, MII_BCM54XX_EXP_DATA, value);
+}
+
+static void r_rc_cal_reset(struct phy_device *phydev)
+{
+ /* Reset R_CAL/RC_CAL Engine */
+ phy_write_exp(phydev, 0x00b0, 0x0010);
+
+ /* Disable Reset R_AL/RC_CAL Engine */
+ phy_write_exp(phydev, 0x00b0, 0x0000);
+}
+
+static int bcm7xxx_28nm_b0_afe_config_init(struct phy_device *phydev)
+{
+ /* Increase VCO range to prevent unlocking problem of PLL at low
+ * temp
+ */
+ phy_write_misc(phydev, PLL_PLLCTRL_1, 0x0048);
+
+ /* Change Ki to 011 */
+ phy_write_misc(phydev, PLL_PLLCTRL_2, 0x021b);
+
+ /* Disable loading of TVCO buffer to bandgap, set bandgap trim
+ * to 111
+ */
+ phy_write_misc(phydev, PLL_PLLCTRL_4, 0x0e20);
+
+ /* Adjust bias current trim by -3 */
+ phy_write_misc(phydev, DSP_TAP10, 0x690b);
+
+ /* Switch to CORE_BASE1E */
+ phy_write(phydev, MII_BCM7XXX_CORE_BASE1E, 0xd);
+
+ r_rc_cal_reset(phydev);
+
+ /* write AFE_RXCONFIG_0 */
+ phy_write_misc(phydev, AFE_RXCONFIG_0, 0xeb19);
+
+ /* write AFE_RXCONFIG_1 */
+ phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9a3f);
+
+ /* write AFE_RX_LP_COUNTER */
+ phy_write_misc(phydev, AFE_RX_LP_COUNTER, 0x7fc0);
+
+ /* write AFE_HPF_TRIM_OTHERS */
+ phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x000b);
+
+ /* write AFTE_TX_CONFIG */
+ phy_write_misc(phydev, AFE_TX_CONFIG, 0x0800);
+
+ return 0;
+}
+
+static int bcm7xxx_28nm_d0_afe_config_init(struct phy_device *phydev)
+{
+ /* AFE_RXCONFIG_0 */
+ phy_write_misc(phydev, AFE_RXCONFIG_0, 0xeb15);
+
+ /* AFE_RXCONFIG_1 */
+ phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9b2f);
+
+ /* AFE_RXCONFIG_2, set rCal offset for HT=0 code and LT=-2 code */
+ phy_write_misc(phydev, AFE_RXCONFIG_2, 0x2003);
+
+ /* AFE_RX_LP_COUNTER, set RX bandwidth to maximum */
+ phy_write_misc(phydev, AFE_RX_LP_COUNTER, 0x7fc0);
+
+ /* AFE_TX_CONFIG, set 1000BT Cfeed=110 for all ports */
+ phy_write_misc(phydev, AFE_TX_CONFIG, 0x0061);
+
+ /* AFE_VDCA_ICTRL_0, set Iq=1101 instead of 0111 for AB symmetry */
+ phy_write_misc(phydev, AFE_VDCA_ICTRL_0, 0xa7da);
+
+ /* AFE_VDAC_OTHERS_0, set 1000BT Cidac=010 for all ports */
+ phy_write_misc(phydev, AFE_VDAC_OTHERS_0, 0xa020);
+
+ /* AFE_HPF_TRIM_OTHERS, set 100Tx/10BT to -4.5% swing and set rCal
+ * offset for HT=0 code
+ */
+ phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x00e3);
+
+ /* CORE_BASE1E, force trim to overwrite and set I_ext trim to 0000 */
+ phy_write(phydev, MII_BCM7XXX_CORE_BASE1E, 0x0010);
+
+ /* DSP_TAP10, adjust bias current trim (+0% swing, +0 tick) */
+ phy_write_misc(phydev, DSP_TAP10, 0x011b);
+
+ /* Reset R_CAL/RC_CAL engine */
+ r_rc_cal_reset(phydev);
+
+ return 0;
+}
+
+static int bcm7xxx_28nm_e0_plus_afe_config_init(struct phy_device *phydev)
+{
+ /* AFE_RXCONFIG_1, provide more margin for INL/DNL measurement */
+ phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9b2f);
+
+ /* AFE_VDCA_ICTRL_0, set Iq=1101 instead of 0111 for AB symmetry */
+ phy_write_misc(phydev, AFE_VDCA_ICTRL_0, 0xa7da);
+
+ /* AFE_HPF_TRIM_OTHERS, set 100Tx/10BT to -4.5% swing and set rCal
+ * offset for HT=0 code
+ */
+ phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x00e3);
+
+ /* CORE_BASE1E, force trim to overwrite and set I_ext trim to 0000 */
+ phy_write(phydev, MII_BCM7XXX_CORE_BASE1E, 0x0010);
+
+ /* DSP_TAP10, adjust bias current trim (+0% swing, +0 tick) */
+ phy_write_misc(phydev, DSP_TAP10, 0x011b);
+
+ /* Reset R_CAL/RC_CAL engine */
+ r_rc_cal_reset(phydev);
+
+ return 0;
+}
+
+static int bcm7xxx_apd_enable(struct phy_device *phydev)
+{
+ int val;
+
+ /* Enable powering down of the DLL during auto-power down */
+ val = bcm54xx_shadow_read(phydev, BCM54XX_SHD_SCR3);
+ if (val < 0)
+ return val;
+
+ val |= BCM54XX_SHD_SCR3_DLLAPD_DIS;
+ bcm54xx_shadow_write(phydev, BCM54XX_SHD_SCR3, val);
+
+ /* Enable auto-power down */
+ val = bcm54xx_shadow_read(phydev, BCM54XX_SHD_APD);
+ if (val < 0)
+ return val;
+
+ val |= BCM54XX_SHD_APD_EN;
+ return bcm54xx_shadow_write(phydev, BCM54XX_SHD_APD, val);
+}
+
+static int bcm7xxx_eee_enable(struct phy_device *phydev)
+{
+ int val;
+
+ val = phy_read_mmd_indirect(phydev, BRCM_CL45VEN_EEE_CONTROL,
+ MDIO_MMD_AN, phydev->addr);
+ if (val < 0)
+ return val;
+
+ /* Enable general EEE feature at the PHY level */
+ val |= LPI_FEATURE_EN | LPI_FEATURE_EN_DIG1000X;
+
+ phy_write_mmd_indirect(phydev, BRCM_CL45VEN_EEE_CONTROL,
+ MDIO_MMD_AN, phydev->addr, val);
+
+ /* Advertise supported modes */
+ val = phy_read_mmd_indirect(phydev, MDIO_AN_EEE_ADV,
+ MDIO_MMD_AN, phydev->addr);
+
+ val |= (MDIO_AN_EEE_ADV_100TX | MDIO_AN_EEE_ADV_1000T);
+ phy_write_mmd_indirect(phydev, MDIO_AN_EEE_ADV,
+ MDIO_MMD_AN, phydev->addr, val);
+
+ return 0;
+}
+
+static int bcm7xxx_28nm_config_init(struct phy_device *phydev)
+{
+ u8 rev = PHY_BRCM_7XXX_REV(phydev->dev_flags);
+ u8 patch = PHY_BRCM_7XXX_PATCH(phydev->dev_flags);
+ int ret = 0;
+
+ pr_info_once("%s: %s PHY revision: 0x%02x, patch: %d\n",
+ dev_name(&phydev->dev), phydev->drv->name, rev, patch);
+
+ switch (rev) {
+ case 0xb0:
+ ret = bcm7xxx_28nm_b0_afe_config_init(phydev);
+ break;
+ case 0xd0:
+ ret = bcm7xxx_28nm_d0_afe_config_init(phydev);
+ break;
+ case 0xe0:
+ case 0xf0:
+ /* Rev G0 introduces a roll over */
+ case 0x10:
+ ret = bcm7xxx_28nm_e0_plus_afe_config_init(phydev);
+ break;
+ default:
+ break;
+ }
+
+ if (ret)
+ return ret;
+
+ ret = bcm7xxx_eee_enable(phydev);
+ if (ret)
+ return ret;
+
+ return bcm7xxx_apd_enable(phydev);
+}
+
+static int bcm7xxx_28nm_resume(struct phy_device *phydev)
+{
+ int ret;
+
+ /* Re-apply workarounds coming out suspend/resume */
+ ret = bcm7xxx_28nm_config_init(phydev);
+ if (ret)
+ return ret;
+
+ /* 28nm Gigabit PHYs come out of reset without any half-duplex
+ * or "hub" compliant advertised mode, fix that. This does not
+ * cause any problems with the PHY library since genphy_config_aneg()
+ * gracefully handles auto-negotiated and forced modes.
+ */
+ return genphy_config_aneg(phydev);
+}
+
+static int phy_set_clr_bits(struct phy_device *dev, int location,
+ int set_mask, int clr_mask)
+{
+ int v, ret;
+
+ v = phy_read(dev, location);
+ if (v < 0)
+ return v;
+
+ v &= ~clr_mask;
+ v |= set_mask;
+
+ ret = phy_write(dev, location, v);
+ if (ret < 0)
+ return ret;
+
+ return v;
+}
+
+static int bcm7xxx_config_init(struct phy_device *phydev)
+{
+ int ret;
+
+ /* Enable 64 clock MDIO */
+ phy_write(phydev, MII_BCM7XXX_AUX_MODE, MII_BCM7XX_64CLK_MDIO);
+ phy_read(phydev, MII_BCM7XXX_AUX_MODE);
+
+ /* Workaround only required for 100Mbits/sec capable PHYs */
+ if (phydev->supported & PHY_GBIT_FEATURES)
+ return 0;
+
+ /* set shadow mode 2 */
+ ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST,
+ MII_BCM7XXX_SHD_MODE_2, MII_BCM7XXX_SHD_MODE_2);
+ if (ret < 0)
+ return ret;
+
+ /* set iddq_clkbias */
+ phy_write(phydev, MII_BCM7XXX_100TX_DISC, 0x0F00);
+ udelay(10);
+
+ /* reset iddq_clkbias */
+ phy_write(phydev, MII_BCM7XXX_100TX_DISC, 0x0C00);
+
+ phy_write(phydev, MII_BCM7XXX_100TX_FALSE_CAR, 0x7555);
+
+ /* reset shadow mode 2 */
+ ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, MII_BCM7XXX_SHD_MODE_2, 0);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+/* Workaround for putting the PHY in IDDQ mode, required
+ * for all BCM7XXX 40nm and 65nm PHYs
+ */
+static int bcm7xxx_suspend(struct phy_device *phydev)
+{
+ int ret;
+ const struct bcm7xxx_regs {
+ int reg;
+ u16 value;
+ } bcm7xxx_suspend_cfg[] = {
+ { MII_BCM7XXX_TEST, 0x008b },
+ { MII_BCM7XXX_100TX_AUX_CTL, 0x01c0 },
+ { MII_BCM7XXX_100TX_DISC, 0x7000 },
+ { MII_BCM7XXX_TEST, 0x000f },
+ { MII_BCM7XXX_100TX_AUX_CTL, 0x20d0 },
+ { MII_BCM7XXX_TEST, 0x000b },
+ };
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(bcm7xxx_suspend_cfg); i++) {
+ ret = phy_write(phydev,
+ bcm7xxx_suspend_cfg[i].reg,
+ bcm7xxx_suspend_cfg[i].value);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int bcm7xxx_dummy_config_init(struct phy_device *phydev)
+{
+ return 0;
+}
+
+#define BCM7XXX_28NM_GPHY(_oui, _name) \
+{ \
+ .phy_id = (_oui), \
+ .phy_id_mask = 0xfffffff0, \
+ .name = _name, \
+ .features = PHY_GBIT_FEATURES | \
+ SUPPORTED_Pause | SUPPORTED_Asym_Pause, \
+ .flags = PHY_IS_INTERNAL, \
+ .config_init = bcm7xxx_28nm_config_init, \
+ .config_aneg = genphy_config_aneg, \
+ .read_status = genphy_read_status, \
+ .resume = bcm7xxx_28nm_resume, \
+ .driver = { .owner = THIS_MODULE }, \
+}
+
+static struct phy_driver bcm7xxx_driver[] = {
+ BCM7XXX_28NM_GPHY(PHY_ID_BCM7250, "Broadcom BCM7250"),
+ BCM7XXX_28NM_GPHY(PHY_ID_BCM7364, "Broadcom BCM7364"),
+ BCM7XXX_28NM_GPHY(PHY_ID_BCM7366, "Broadcom BCM7366"),
+ BCM7XXX_28NM_GPHY(PHY_ID_BCM7439, "Broadcom BCM7439"),
+ BCM7XXX_28NM_GPHY(PHY_ID_BCM7439_2, "Broadcom BCM7439 (2)"),
+ BCM7XXX_28NM_GPHY(PHY_ID_BCM7445, "Broadcom BCM7445"),
+{
+ .phy_id = PHY_ID_BCM7425,
+ .phy_id_mask = 0xfffffff0,
+ .name = "Broadcom BCM7425",
+ .features = PHY_GBIT_FEATURES |
+ SUPPORTED_Pause | SUPPORTED_Asym_Pause,
+ .flags = PHY_IS_INTERNAL,
+ .config_init = bcm7xxx_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .suspend = bcm7xxx_suspend,
+ .resume = bcm7xxx_config_init,
+ .driver = { .owner = THIS_MODULE },
+}, {
+ .phy_id = PHY_ID_BCM7429,
+ .phy_id_mask = 0xfffffff0,
+ .name = "Broadcom BCM7429",
+ .features = PHY_GBIT_FEATURES |
+ SUPPORTED_Pause | SUPPORTED_Asym_Pause,
+ .flags = PHY_IS_INTERNAL,
+ .config_init = bcm7xxx_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .suspend = bcm7xxx_suspend,
+ .resume = bcm7xxx_config_init,
+ .driver = { .owner = THIS_MODULE },
+}, {
+ .phy_id = PHY_BCM_OUI_4,
+ .phy_id_mask = 0xffff0000,
+ .name = "Broadcom BCM7XXX 40nm",
+ .features = PHY_GBIT_FEATURES |
+ SUPPORTED_Pause | SUPPORTED_Asym_Pause,
+ .flags = PHY_IS_INTERNAL,
+ .config_init = bcm7xxx_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .suspend = bcm7xxx_suspend,
+ .resume = bcm7xxx_config_init,
+ .driver = { .owner = THIS_MODULE },
+}, {
+ .phy_id = PHY_BCM_OUI_5,
+ .phy_id_mask = 0xffffff00,
+ .name = "Broadcom BCM7XXX 65nm",
+ .features = PHY_BASIC_FEATURES |
+ SUPPORTED_Pause | SUPPORTED_Asym_Pause,
+ .flags = PHY_IS_INTERNAL,
+ .config_init = bcm7xxx_dummy_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .suspend = bcm7xxx_suspend,
+ .resume = bcm7xxx_config_init,
+ .driver = { .owner = THIS_MODULE },
+} };
+
+static struct mdio_device_id __maybe_unused bcm7xxx_tbl[] = {
+ { PHY_ID_BCM7250, 0xfffffff0, },
+ { PHY_ID_BCM7364, 0xfffffff0, },
+ { PHY_ID_BCM7366, 0xfffffff0, },
+ { PHY_ID_BCM7425, 0xfffffff0, },
+ { PHY_ID_BCM7429, 0xfffffff0, },
+ { PHY_ID_BCM7439, 0xfffffff0, },
+ { PHY_ID_BCM7445, 0xfffffff0, },
+ { PHY_BCM_OUI_4, 0xffff0000 },
+ { PHY_BCM_OUI_5, 0xffffff00 },
+ { }
+};
+
+module_phy_driver(bcm7xxx_driver);
+
+MODULE_DEVICE_TABLE(mdio, bcm7xxx_tbl);
+
+MODULE_DESCRIPTION("Broadcom BCM7xxx internal PHY driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Broadcom Corporation");
diff --git a/kernel/drivers/net/phy/bcm87xx.c b/kernel/drivers/net/phy/bcm87xx.c
new file mode 100644
index 000000000..1eca20452
--- /dev/null
+++ b/kernel/drivers/net/phy/bcm87xx.c
@@ -0,0 +1,221 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2011 - 2012 Cavium, Inc.
+ */
+
+#include <linux/module.h>
+#include <linux/phy.h>
+#include <linux/of.h>
+
+#define PHY_ID_BCM8706 0x0143bdc1
+#define PHY_ID_BCM8727 0x0143bff0
+
+#define BCM87XX_PMD_RX_SIGNAL_DETECT (MII_ADDR_C45 | 0x1000a)
+#define BCM87XX_10GBASER_PCS_STATUS (MII_ADDR_C45 | 0x30020)
+#define BCM87XX_XGXS_LANE_STATUS (MII_ADDR_C45 | 0x40018)
+
+#define BCM87XX_LASI_CONTROL (MII_ADDR_C45 | 0x39002)
+#define BCM87XX_LASI_STATUS (MII_ADDR_C45 | 0x39005)
+
+#if IS_ENABLED(CONFIG_OF_MDIO)
+/* Set and/or override some configuration registers based on the
+ * broadcom,c45-reg-init property stored in the of_node for the phydev.
+ *
+ * broadcom,c45-reg-init = <devid reg mask value>,...;
+ *
+ * There may be one or more sets of <devid reg mask value>:
+ *
+ * devid: which sub-device to use.
+ * reg: the register.
+ * mask: if non-zero, ANDed with existing register value.
+ * value: ORed with the masked value and written to the regiser.
+ *
+ */
+static int bcm87xx_of_reg_init(struct phy_device *phydev)
+{
+ const __be32 *paddr;
+ const __be32 *paddr_end;
+ int len, ret;
+
+ if (!phydev->dev.of_node)
+ return 0;
+
+ paddr = of_get_property(phydev->dev.of_node,
+ "broadcom,c45-reg-init", &len);
+ if (!paddr)
+ return 0;
+
+ paddr_end = paddr + (len /= sizeof(*paddr));
+
+ ret = 0;
+
+ while (paddr + 3 < paddr_end) {
+ u16 devid = be32_to_cpup(paddr++);
+ u16 reg = be32_to_cpup(paddr++);
+ u16 mask = be32_to_cpup(paddr++);
+ u16 val_bits = be32_to_cpup(paddr++);
+ int val;
+ u32 regnum = MII_ADDR_C45 | (devid << 16) | reg;
+ val = 0;
+ if (mask) {
+ val = phy_read(phydev, regnum);
+ if (val < 0) {
+ ret = val;
+ goto err;
+ }
+ val &= mask;
+ }
+ val |= val_bits;
+
+ ret = phy_write(phydev, regnum, val);
+ if (ret < 0)
+ goto err;
+ }
+err:
+ return ret;
+}
+#else
+static int bcm87xx_of_reg_init(struct phy_device *phydev)
+{
+ return 0;
+}
+#endif /* CONFIG_OF_MDIO */
+
+static int bcm87xx_config_init(struct phy_device *phydev)
+{
+ phydev->supported = SUPPORTED_10000baseR_FEC;
+ phydev->advertising = ADVERTISED_10000baseR_FEC;
+ phydev->state = PHY_NOLINK;
+ phydev->autoneg = AUTONEG_DISABLE;
+
+ bcm87xx_of_reg_init(phydev);
+
+ return 0;
+}
+
+static int bcm87xx_config_aneg(struct phy_device *phydev)
+{
+ return -EINVAL;
+}
+
+static int bcm87xx_read_status(struct phy_device *phydev)
+{
+ int rx_signal_detect;
+ int pcs_status;
+ int xgxs_lane_status;
+
+ rx_signal_detect = phy_read(phydev, BCM87XX_PMD_RX_SIGNAL_DETECT);
+ if (rx_signal_detect < 0)
+ return rx_signal_detect;
+
+ if ((rx_signal_detect & 1) == 0)
+ goto no_link;
+
+ pcs_status = phy_read(phydev, BCM87XX_10GBASER_PCS_STATUS);
+ if (pcs_status < 0)
+ return pcs_status;
+
+ if ((pcs_status & 1) == 0)
+ goto no_link;
+
+ xgxs_lane_status = phy_read(phydev, BCM87XX_XGXS_LANE_STATUS);
+ if (xgxs_lane_status < 0)
+ return xgxs_lane_status;
+
+ if ((xgxs_lane_status & 0x1000) == 0)
+ goto no_link;
+
+ phydev->speed = 10000;
+ phydev->link = 1;
+ phydev->duplex = 1;
+ return 0;
+
+no_link:
+ phydev->link = 0;
+ return 0;
+}
+
+static int bcm87xx_config_intr(struct phy_device *phydev)
+{
+ int reg, err;
+
+ reg = phy_read(phydev, BCM87XX_LASI_CONTROL);
+
+ if (reg < 0)
+ return reg;
+
+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+ reg |= 1;
+ else
+ reg &= ~1;
+
+ err = phy_write(phydev, BCM87XX_LASI_CONTROL, reg);
+ return err;
+}
+
+static int bcm87xx_did_interrupt(struct phy_device *phydev)
+{
+ int reg;
+
+ reg = phy_read(phydev, BCM87XX_LASI_STATUS);
+
+ if (reg < 0) {
+ dev_err(&phydev->dev,
+ "Error: Read of BCM87XX_LASI_STATUS failed: %d\n", reg);
+ return 0;
+ }
+ return (reg & 1) != 0;
+}
+
+static int bcm87xx_ack_interrupt(struct phy_device *phydev)
+{
+ /* Reading the LASI status clears it. */
+ bcm87xx_did_interrupt(phydev);
+ return 0;
+}
+
+static int bcm8706_match_phy_device(struct phy_device *phydev)
+{
+ return phydev->c45_ids.device_ids[4] == PHY_ID_BCM8706;
+}
+
+static int bcm8727_match_phy_device(struct phy_device *phydev)
+{
+ return phydev->c45_ids.device_ids[4] == PHY_ID_BCM8727;
+}
+
+static struct phy_driver bcm87xx_driver[] = {
+{
+ .phy_id = PHY_ID_BCM8706,
+ .phy_id_mask = 0xffffffff,
+ .name = "Broadcom BCM8706",
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = bcm87xx_config_init,
+ .config_aneg = bcm87xx_config_aneg,
+ .read_status = bcm87xx_read_status,
+ .ack_interrupt = bcm87xx_ack_interrupt,
+ .config_intr = bcm87xx_config_intr,
+ .did_interrupt = bcm87xx_did_interrupt,
+ .match_phy_device = bcm8706_match_phy_device,
+ .driver = { .owner = THIS_MODULE },
+}, {
+ .phy_id = PHY_ID_BCM8727,
+ .phy_id_mask = 0xffffffff,
+ .name = "Broadcom BCM8727",
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = bcm87xx_config_init,
+ .config_aneg = bcm87xx_config_aneg,
+ .read_status = bcm87xx_read_status,
+ .ack_interrupt = bcm87xx_ack_interrupt,
+ .config_intr = bcm87xx_config_intr,
+ .did_interrupt = bcm87xx_did_interrupt,
+ .match_phy_device = bcm8727_match_phy_device,
+ .driver = { .owner = THIS_MODULE },
+} };
+
+module_phy_driver(bcm87xx_driver);
+
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/net/phy/broadcom.c b/kernel/drivers/net/phy/broadcom.c
new file mode 100644
index 000000000..9c71295f2
--- /dev/null
+++ b/kernel/drivers/net/phy/broadcom.c
@@ -0,0 +1,688 @@
+/*
+ * drivers/net/phy/broadcom.c
+ *
+ * Broadcom BCM5411, BCM5421 and BCM5461 Gigabit Ethernet
+ * transceivers.
+ *
+ * Copyright (c) 2006 Maciej W. Rozycki
+ *
+ * Inspired by code written by Amy Fong.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/phy.h>
+#include <linux/brcmphy.h>
+
+
+#define BRCM_PHY_MODEL(phydev) \
+ ((phydev)->drv->phy_id & (phydev)->drv->phy_id_mask)
+
+#define BRCM_PHY_REV(phydev) \
+ ((phydev)->drv->phy_id & ~((phydev)->drv->phy_id_mask))
+
+MODULE_DESCRIPTION("Broadcom PHY driver");
+MODULE_AUTHOR("Maciej W. Rozycki");
+MODULE_LICENSE("GPL");
+
+/* Indirect register access functions for the Expansion Registers */
+static int bcm54xx_exp_read(struct phy_device *phydev, u16 regnum)
+{
+ int val;
+
+ val = phy_write(phydev, MII_BCM54XX_EXP_SEL, regnum);
+ if (val < 0)
+ return val;
+
+ val = phy_read(phydev, MII_BCM54XX_EXP_DATA);
+
+ /* Restore default value. It's O.K. if this write fails. */
+ phy_write(phydev, MII_BCM54XX_EXP_SEL, 0);
+
+ return val;
+}
+
+static int bcm54xx_exp_write(struct phy_device *phydev, u16 regnum, u16 val)
+{
+ int ret;
+
+ ret = phy_write(phydev, MII_BCM54XX_EXP_SEL, regnum);
+ if (ret < 0)
+ return ret;
+
+ ret = phy_write(phydev, MII_BCM54XX_EXP_DATA, val);
+
+ /* Restore default value. It's O.K. if this write fails. */
+ phy_write(phydev, MII_BCM54XX_EXP_SEL, 0);
+
+ return ret;
+}
+
+static int bcm54xx_auxctl_write(struct phy_device *phydev, u16 regnum, u16 val)
+{
+ return phy_write(phydev, MII_BCM54XX_AUX_CTL, regnum | val);
+}
+
+/* Needs SMDSP clock enabled via bcm54xx_phydsp_config() */
+static int bcm50610_a0_workaround(struct phy_device *phydev)
+{
+ int err;
+
+ err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_AADJ1CH0,
+ MII_BCM54XX_EXP_AADJ1CH0_SWP_ABCD_OEN |
+ MII_BCM54XX_EXP_AADJ1CH0_SWSEL_THPF);
+ if (err < 0)
+ return err;
+
+ err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_AADJ1CH3,
+ MII_BCM54XX_EXP_AADJ1CH3_ADCCKADJ);
+ if (err < 0)
+ return err;
+
+ err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_EXP75,
+ MII_BCM54XX_EXP_EXP75_VDACCTRL);
+ if (err < 0)
+ return err;
+
+ err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_EXP96,
+ MII_BCM54XX_EXP_EXP96_MYST);
+ if (err < 0)
+ return err;
+
+ err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_EXP97,
+ MII_BCM54XX_EXP_EXP97_MYST);
+
+ return err;
+}
+
+static int bcm54xx_phydsp_config(struct phy_device *phydev)
+{
+ int err, err2;
+
+ /* Enable the SMDSP clock */
+ err = bcm54xx_auxctl_write(phydev,
+ MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL,
+ MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA |
+ MII_BCM54XX_AUXCTL_ACTL_TX_6DB);
+ if (err < 0)
+ return err;
+
+ if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610 ||
+ BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610M) {
+ /* Clear bit 9 to fix a phy interop issue. */
+ err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_EXP08,
+ MII_BCM54XX_EXP_EXP08_RJCT_2MHZ);
+ if (err < 0)
+ goto error;
+
+ if (phydev->drv->phy_id == PHY_ID_BCM50610) {
+ err = bcm50610_a0_workaround(phydev);
+ if (err < 0)
+ goto error;
+ }
+ }
+
+ if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM57780) {
+ int val;
+
+ val = bcm54xx_exp_read(phydev, MII_BCM54XX_EXP_EXP75);
+ if (val < 0)
+ goto error;
+
+ val |= MII_BCM54XX_EXP_EXP75_CM_OSC;
+ err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_EXP75, val);
+ }
+
+error:
+ /* Disable the SMDSP clock */
+ err2 = bcm54xx_auxctl_write(phydev,
+ MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL,
+ MII_BCM54XX_AUXCTL_ACTL_TX_6DB);
+
+ /* Return the first error reported. */
+ return err ? err : err2;
+}
+
+static void bcm54xx_adjust_rxrefclk(struct phy_device *phydev)
+{
+ u32 orig;
+ int val;
+ bool clk125en = true;
+
+ /* Abort if we are using an untested phy. */
+ if (BRCM_PHY_MODEL(phydev) != PHY_ID_BCM57780 &&
+ BRCM_PHY_MODEL(phydev) != PHY_ID_BCM50610 &&
+ BRCM_PHY_MODEL(phydev) != PHY_ID_BCM50610M)
+ return;
+
+ val = bcm54xx_shadow_read(phydev, BCM54XX_SHD_SCR3);
+ if (val < 0)
+ return;
+
+ orig = val;
+
+ if ((BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610 ||
+ BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610M) &&
+ BRCM_PHY_REV(phydev) >= 0x3) {
+ /*
+ * Here, bit 0 _disables_ CLK125 when set.
+ * This bit is set by default.
+ */
+ clk125en = false;
+ } else {
+ if (phydev->dev_flags & PHY_BRCM_RX_REFCLK_UNUSED) {
+ /* Here, bit 0 _enables_ CLK125 when set */
+ val &= ~BCM54XX_SHD_SCR3_DEF_CLK125;
+ clk125en = false;
+ }
+ }
+
+ if (!clk125en || (phydev->dev_flags & PHY_BRCM_AUTO_PWRDWN_ENABLE))
+ val &= ~BCM54XX_SHD_SCR3_DLLAPD_DIS;
+ else
+ val |= BCM54XX_SHD_SCR3_DLLAPD_DIS;
+
+ if (phydev->dev_flags & PHY_BRCM_DIS_TXCRXC_NOENRGY)
+ val |= BCM54XX_SHD_SCR3_TRDDAPD;
+
+ if (orig != val)
+ bcm54xx_shadow_write(phydev, BCM54XX_SHD_SCR3, val);
+
+ val = bcm54xx_shadow_read(phydev, BCM54XX_SHD_APD);
+ if (val < 0)
+ return;
+
+ orig = val;
+
+ if (!clk125en || (phydev->dev_flags & PHY_BRCM_AUTO_PWRDWN_ENABLE))
+ val |= BCM54XX_SHD_APD_EN;
+ else
+ val &= ~BCM54XX_SHD_APD_EN;
+
+ if (orig != val)
+ bcm54xx_shadow_write(phydev, BCM54XX_SHD_APD, val);
+}
+
+static int bcm54xx_config_init(struct phy_device *phydev)
+{
+ int reg, err;
+
+ reg = phy_read(phydev, MII_BCM54XX_ECR);
+ if (reg < 0)
+ return reg;
+
+ /* Mask interrupts globally. */
+ reg |= MII_BCM54XX_ECR_IM;
+ err = phy_write(phydev, MII_BCM54XX_ECR, reg);
+ if (err < 0)
+ return err;
+
+ /* Unmask events we are interested in. */
+ reg = ~(MII_BCM54XX_INT_DUPLEX |
+ MII_BCM54XX_INT_SPEED |
+ MII_BCM54XX_INT_LINK);
+ err = phy_write(phydev, MII_BCM54XX_IMR, reg);
+ if (err < 0)
+ return err;
+
+ if ((BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610 ||
+ BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610M) &&
+ (phydev->dev_flags & PHY_BRCM_CLEAR_RGMII_MODE))
+ bcm54xx_shadow_write(phydev, BCM54XX_SHD_RGMII_MODE, 0);
+
+ if ((phydev->dev_flags & PHY_BRCM_RX_REFCLK_UNUSED) ||
+ (phydev->dev_flags & PHY_BRCM_DIS_TXCRXC_NOENRGY) ||
+ (phydev->dev_flags & PHY_BRCM_AUTO_PWRDWN_ENABLE))
+ bcm54xx_adjust_rxrefclk(phydev);
+
+ bcm54xx_phydsp_config(phydev);
+
+ return 0;
+}
+
+static int bcm5482_config_init(struct phy_device *phydev)
+{
+ int err, reg;
+
+ err = bcm54xx_config_init(phydev);
+
+ if (phydev->dev_flags & PHY_BCM_FLAGS_MODE_1000BX) {
+ /*
+ * Enable secondary SerDes and its use as an LED source
+ */
+ reg = bcm54xx_shadow_read(phydev, BCM5482_SHD_SSD);
+ bcm54xx_shadow_write(phydev, BCM5482_SHD_SSD,
+ reg |
+ BCM5482_SHD_SSD_LEDM |
+ BCM5482_SHD_SSD_EN);
+
+ /*
+ * Enable SGMII slave mode and auto-detection
+ */
+ reg = BCM5482_SSD_SGMII_SLAVE | MII_BCM54XX_EXP_SEL_SSD;
+ err = bcm54xx_exp_read(phydev, reg);
+ if (err < 0)
+ return err;
+ err = bcm54xx_exp_write(phydev, reg, err |
+ BCM5482_SSD_SGMII_SLAVE_EN |
+ BCM5482_SSD_SGMII_SLAVE_AD);
+ if (err < 0)
+ return err;
+
+ /*
+ * Disable secondary SerDes powerdown
+ */
+ reg = BCM5482_SSD_1000BX_CTL | MII_BCM54XX_EXP_SEL_SSD;
+ err = bcm54xx_exp_read(phydev, reg);
+ if (err < 0)
+ return err;
+ err = bcm54xx_exp_write(phydev, reg,
+ err & ~BCM5482_SSD_1000BX_CTL_PWRDOWN);
+ if (err < 0)
+ return err;
+
+ /*
+ * Select 1000BASE-X register set (primary SerDes)
+ */
+ reg = bcm54xx_shadow_read(phydev, BCM5482_SHD_MODE);
+ bcm54xx_shadow_write(phydev, BCM5482_SHD_MODE,
+ reg | BCM5482_SHD_MODE_1000BX);
+
+ /*
+ * LED1=ACTIVITYLED, LED3=LINKSPD[2]
+ * (Use LED1 as secondary SerDes ACTIVITY LED)
+ */
+ bcm54xx_shadow_write(phydev, BCM5482_SHD_LEDS1,
+ BCM5482_SHD_LEDS1_LED1(BCM_LED_SRC_ACTIVITYLED) |
+ BCM5482_SHD_LEDS1_LED3(BCM_LED_SRC_LINKSPD2));
+
+ /*
+ * Auto-negotiation doesn't seem to work quite right
+ * in this mode, so we disable it and force it to the
+ * right speed/duplex setting. Only 'link status'
+ * is important.
+ */
+ phydev->autoneg = AUTONEG_DISABLE;
+ phydev->speed = SPEED_1000;
+ phydev->duplex = DUPLEX_FULL;
+ }
+
+ return err;
+}
+
+static int bcm5482_read_status(struct phy_device *phydev)
+{
+ int err;
+
+ err = genphy_read_status(phydev);
+
+ if (phydev->dev_flags & PHY_BCM_FLAGS_MODE_1000BX) {
+ /*
+ * Only link status matters for 1000Base-X mode, so force
+ * 1000 Mbit/s full-duplex status
+ */
+ if (phydev->link) {
+ phydev->speed = SPEED_1000;
+ phydev->duplex = DUPLEX_FULL;
+ }
+ }
+
+ return err;
+}
+
+static int bcm54xx_ack_interrupt(struct phy_device *phydev)
+{
+ int reg;
+
+ /* Clear pending interrupts. */
+ reg = phy_read(phydev, MII_BCM54XX_ISR);
+ if (reg < 0)
+ return reg;
+
+ return 0;
+}
+
+static int bcm54xx_config_intr(struct phy_device *phydev)
+{
+ int reg, err;
+
+ reg = phy_read(phydev, MII_BCM54XX_ECR);
+ if (reg < 0)
+ return reg;
+
+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+ reg &= ~MII_BCM54XX_ECR_IM;
+ else
+ reg |= MII_BCM54XX_ECR_IM;
+
+ err = phy_write(phydev, MII_BCM54XX_ECR, reg);
+ return err;
+}
+
+static int bcm5481_config_aneg(struct phy_device *phydev)
+{
+ int ret;
+
+ /* Aneg firsly. */
+ ret = genphy_config_aneg(phydev);
+
+ /* Then we can set up the delay. */
+ if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) {
+ u16 reg;
+
+ /*
+ * There is no BCM5481 specification available, so down
+ * here is everything we know about "register 0x18". This
+ * at least helps BCM5481 to successfully receive packets
+ * on MPC8360E-RDK board. Peter Barada <peterb@logicpd.com>
+ * says: "This sets delay between the RXD and RXC signals
+ * instead of using trace lengths to achieve timing".
+ */
+
+ /* Set RDX clk delay. */
+ reg = 0x7 | (0x7 << 12);
+ phy_write(phydev, 0x18, reg);
+
+ reg = phy_read(phydev, 0x18);
+ /* Set RDX-RXC skew. */
+ reg |= (1 << 8);
+ /* Write bits 14:0. */
+ reg |= (1 << 15);
+ phy_write(phydev, 0x18, reg);
+ }
+
+ return ret;
+}
+
+static int brcm_phy_setbits(struct phy_device *phydev, int reg, int set)
+{
+ int val;
+
+ val = phy_read(phydev, reg);
+ if (val < 0)
+ return val;
+
+ return phy_write(phydev, reg, val | set);
+}
+
+static int brcm_fet_config_init(struct phy_device *phydev)
+{
+ int reg, err, err2, brcmtest;
+
+ /* Reset the PHY to bring it to a known state. */
+ err = phy_write(phydev, MII_BMCR, BMCR_RESET);
+ if (err < 0)
+ return err;
+
+ reg = phy_read(phydev, MII_BRCM_FET_INTREG);
+ if (reg < 0)
+ return reg;
+
+ /* Unmask events we are interested in and mask interrupts globally. */
+ reg = MII_BRCM_FET_IR_DUPLEX_EN |
+ MII_BRCM_FET_IR_SPEED_EN |
+ MII_BRCM_FET_IR_LINK_EN |
+ MII_BRCM_FET_IR_ENABLE |
+ MII_BRCM_FET_IR_MASK;
+
+ err = phy_write(phydev, MII_BRCM_FET_INTREG, reg);
+ if (err < 0)
+ return err;
+
+ /* Enable shadow register access */
+ brcmtest = phy_read(phydev, MII_BRCM_FET_BRCMTEST);
+ if (brcmtest < 0)
+ return brcmtest;
+
+ reg = brcmtest | MII_BRCM_FET_BT_SRE;
+
+ err = phy_write(phydev, MII_BRCM_FET_BRCMTEST, reg);
+ if (err < 0)
+ return err;
+
+ /* Set the LED mode */
+ reg = phy_read(phydev, MII_BRCM_FET_SHDW_AUXMODE4);
+ if (reg < 0) {
+ err = reg;
+ goto done;
+ }
+
+ reg &= ~MII_BRCM_FET_SHDW_AM4_LED_MASK;
+ reg |= MII_BRCM_FET_SHDW_AM4_LED_MODE1;
+
+ err = phy_write(phydev, MII_BRCM_FET_SHDW_AUXMODE4, reg);
+ if (err < 0)
+ goto done;
+
+ /* Enable auto MDIX */
+ err = brcm_phy_setbits(phydev, MII_BRCM_FET_SHDW_MISCCTRL,
+ MII_BRCM_FET_SHDW_MC_FAME);
+ if (err < 0)
+ goto done;
+
+ if (phydev->dev_flags & PHY_BRCM_AUTO_PWRDWN_ENABLE) {
+ /* Enable auto power down */
+ err = brcm_phy_setbits(phydev, MII_BRCM_FET_SHDW_AUXSTAT2,
+ MII_BRCM_FET_SHDW_AS2_APDE);
+ }
+
+done:
+ /* Disable shadow register access */
+ err2 = phy_write(phydev, MII_BRCM_FET_BRCMTEST, brcmtest);
+ if (!err)
+ err = err2;
+
+ return err;
+}
+
+static int brcm_fet_ack_interrupt(struct phy_device *phydev)
+{
+ int reg;
+
+ /* Clear pending interrupts. */
+ reg = phy_read(phydev, MII_BRCM_FET_INTREG);
+ if (reg < 0)
+ return reg;
+
+ return 0;
+}
+
+static int brcm_fet_config_intr(struct phy_device *phydev)
+{
+ int reg, err;
+
+ reg = phy_read(phydev, MII_BRCM_FET_INTREG);
+ if (reg < 0)
+ return reg;
+
+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+ reg &= ~MII_BRCM_FET_IR_MASK;
+ else
+ reg |= MII_BRCM_FET_IR_MASK;
+
+ err = phy_write(phydev, MII_BRCM_FET_INTREG, reg);
+ return err;
+}
+
+static struct phy_driver broadcom_drivers[] = {
+{
+ .phy_id = PHY_ID_BCM5411,
+ .phy_id_mask = 0xfffffff0,
+ .name = "Broadcom BCM5411",
+ .features = PHY_GBIT_FEATURES |
+ SUPPORTED_Pause | SUPPORTED_Asym_Pause,
+ .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+ .config_init = bcm54xx_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = bcm54xx_ack_interrupt,
+ .config_intr = bcm54xx_config_intr,
+ .driver = { .owner = THIS_MODULE },
+}, {
+ .phy_id = PHY_ID_BCM5421,
+ .phy_id_mask = 0xfffffff0,
+ .name = "Broadcom BCM5421",
+ .features = PHY_GBIT_FEATURES |
+ SUPPORTED_Pause | SUPPORTED_Asym_Pause,
+ .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+ .config_init = bcm54xx_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = bcm54xx_ack_interrupt,
+ .config_intr = bcm54xx_config_intr,
+ .driver = { .owner = THIS_MODULE },
+}, {
+ .phy_id = PHY_ID_BCM5461,
+ .phy_id_mask = 0xfffffff0,
+ .name = "Broadcom BCM5461",
+ .features = PHY_GBIT_FEATURES |
+ SUPPORTED_Pause | SUPPORTED_Asym_Pause,
+ .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+ .config_init = bcm54xx_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = bcm54xx_ack_interrupt,
+ .config_intr = bcm54xx_config_intr,
+ .driver = { .owner = THIS_MODULE },
+}, {
+ .phy_id = PHY_ID_BCM54616S,
+ .phy_id_mask = 0xfffffff0,
+ .name = "Broadcom BCM54616S",
+ .features = PHY_GBIT_FEATURES |
+ SUPPORTED_Pause | SUPPORTED_Asym_Pause,
+ .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+ .config_init = bcm54xx_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = bcm54xx_ack_interrupt,
+ .config_intr = bcm54xx_config_intr,
+ .driver = { .owner = THIS_MODULE },
+}, {
+ .phy_id = PHY_ID_BCM5464,
+ .phy_id_mask = 0xfffffff0,
+ .name = "Broadcom BCM5464",
+ .features = PHY_GBIT_FEATURES |
+ SUPPORTED_Pause | SUPPORTED_Asym_Pause,
+ .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+ .config_init = bcm54xx_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = bcm54xx_ack_interrupt,
+ .config_intr = bcm54xx_config_intr,
+ .driver = { .owner = THIS_MODULE },
+}, {
+ .phy_id = PHY_ID_BCM5481,
+ .phy_id_mask = 0xfffffff0,
+ .name = "Broadcom BCM5481",
+ .features = PHY_GBIT_FEATURES |
+ SUPPORTED_Pause | SUPPORTED_Asym_Pause,
+ .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+ .config_init = bcm54xx_config_init,
+ .config_aneg = bcm5481_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = bcm54xx_ack_interrupt,
+ .config_intr = bcm54xx_config_intr,
+ .driver = { .owner = THIS_MODULE },
+}, {
+ .phy_id = PHY_ID_BCM5482,
+ .phy_id_mask = 0xfffffff0,
+ .name = "Broadcom BCM5482",
+ .features = PHY_GBIT_FEATURES |
+ SUPPORTED_Pause | SUPPORTED_Asym_Pause,
+ .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+ .config_init = bcm5482_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = bcm5482_read_status,
+ .ack_interrupt = bcm54xx_ack_interrupt,
+ .config_intr = bcm54xx_config_intr,
+ .driver = { .owner = THIS_MODULE },
+}, {
+ .phy_id = PHY_ID_BCM50610,
+ .phy_id_mask = 0xfffffff0,
+ .name = "Broadcom BCM50610",
+ .features = PHY_GBIT_FEATURES |
+ SUPPORTED_Pause | SUPPORTED_Asym_Pause,
+ .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+ .config_init = bcm54xx_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = bcm54xx_ack_interrupt,
+ .config_intr = bcm54xx_config_intr,
+ .driver = { .owner = THIS_MODULE },
+}, {
+ .phy_id = PHY_ID_BCM50610M,
+ .phy_id_mask = 0xfffffff0,
+ .name = "Broadcom BCM50610M",
+ .features = PHY_GBIT_FEATURES |
+ SUPPORTED_Pause | SUPPORTED_Asym_Pause,
+ .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+ .config_init = bcm54xx_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = bcm54xx_ack_interrupt,
+ .config_intr = bcm54xx_config_intr,
+ .driver = { .owner = THIS_MODULE },
+}, {
+ .phy_id = PHY_ID_BCM57780,
+ .phy_id_mask = 0xfffffff0,
+ .name = "Broadcom BCM57780",
+ .features = PHY_GBIT_FEATURES |
+ SUPPORTED_Pause | SUPPORTED_Asym_Pause,
+ .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+ .config_init = bcm54xx_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = bcm54xx_ack_interrupt,
+ .config_intr = bcm54xx_config_intr,
+ .driver = { .owner = THIS_MODULE },
+}, {
+ .phy_id = PHY_ID_BCMAC131,
+ .phy_id_mask = 0xfffffff0,
+ .name = "Broadcom BCMAC131",
+ .features = PHY_BASIC_FEATURES |
+ SUPPORTED_Pause | SUPPORTED_Asym_Pause,
+ .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+ .config_init = brcm_fet_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = brcm_fet_ack_interrupt,
+ .config_intr = brcm_fet_config_intr,
+ .driver = { .owner = THIS_MODULE },
+}, {
+ .phy_id = PHY_ID_BCM5241,
+ .phy_id_mask = 0xfffffff0,
+ .name = "Broadcom BCM5241",
+ .features = PHY_BASIC_FEATURES |
+ SUPPORTED_Pause | SUPPORTED_Asym_Pause,
+ .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+ .config_init = brcm_fet_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = brcm_fet_ack_interrupt,
+ .config_intr = brcm_fet_config_intr,
+ .driver = { .owner = THIS_MODULE },
+} };
+
+module_phy_driver(broadcom_drivers);
+
+static struct mdio_device_id __maybe_unused broadcom_tbl[] = {
+ { PHY_ID_BCM5411, 0xfffffff0 },
+ { PHY_ID_BCM5421, 0xfffffff0 },
+ { PHY_ID_BCM5461, 0xfffffff0 },
+ { PHY_ID_BCM54616S, 0xfffffff0 },
+ { PHY_ID_BCM5464, 0xfffffff0 },
+ { PHY_ID_BCM5482, 0xfffffff0 },
+ { PHY_ID_BCM5482, 0xfffffff0 },
+ { PHY_ID_BCM50610, 0xfffffff0 },
+ { PHY_ID_BCM50610M, 0xfffffff0 },
+ { PHY_ID_BCM57780, 0xfffffff0 },
+ { PHY_ID_BCMAC131, 0xfffffff0 },
+ { PHY_ID_BCM5241, 0xfffffff0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(mdio, broadcom_tbl);
diff --git a/kernel/drivers/net/phy/cicada.c b/kernel/drivers/net/phy/cicada.c
new file mode 100644
index 000000000..27f546489
--- /dev/null
+++ b/kernel/drivers/net/phy/cicada.c
@@ -0,0 +1,140 @@
+/*
+ * drivers/net/phy/cicada.c
+ *
+ * Driver for Cicada PHYs
+ *
+ * Author: Andy Fleming
+ *
+ * Copyright (c) 2004 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/unistd.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+
+#include <linux/io.h>
+#include <asm/irq.h>
+#include <linux/uaccess.h>
+
+/* Cicada Extended Control Register 1 */
+#define MII_CIS8201_EXT_CON1 0x17
+#define MII_CIS8201_EXTCON1_INIT 0x0000
+
+/* Cicada Interrupt Mask Register */
+#define MII_CIS8201_IMASK 0x19
+#define MII_CIS8201_IMASK_IEN 0x8000
+#define MII_CIS8201_IMASK_SPEED 0x4000
+#define MII_CIS8201_IMASK_LINK 0x2000
+#define MII_CIS8201_IMASK_DUPLEX 0x1000
+#define MII_CIS8201_IMASK_MASK 0xf000
+
+/* Cicada Interrupt Status Register */
+#define MII_CIS8201_ISTAT 0x1a
+#define MII_CIS8201_ISTAT_STATUS 0x8000
+#define MII_CIS8201_ISTAT_SPEED 0x4000
+#define MII_CIS8201_ISTAT_LINK 0x2000
+#define MII_CIS8201_ISTAT_DUPLEX 0x1000
+
+/* Cicada Auxiliary Control/Status Register */
+#define MII_CIS8201_AUX_CONSTAT 0x1c
+#define MII_CIS8201_AUXCONSTAT_INIT 0x0004
+#define MII_CIS8201_AUXCONSTAT_DUPLEX 0x0020
+#define MII_CIS8201_AUXCONSTAT_SPEED 0x0018
+#define MII_CIS8201_AUXCONSTAT_GBIT 0x0010
+#define MII_CIS8201_AUXCONSTAT_100 0x0008
+
+MODULE_DESCRIPTION("Cicadia PHY driver");
+MODULE_AUTHOR("Andy Fleming");
+MODULE_LICENSE("GPL");
+
+static int cis820x_config_init(struct phy_device *phydev)
+{
+ int err;
+
+ err = phy_write(phydev, MII_CIS8201_AUX_CONSTAT,
+ MII_CIS8201_AUXCONSTAT_INIT);
+
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, MII_CIS8201_EXT_CON1,
+ MII_CIS8201_EXTCON1_INIT);
+
+ return err;
+}
+
+static int cis820x_ack_interrupt(struct phy_device *phydev)
+{
+ int err = phy_read(phydev, MII_CIS8201_ISTAT);
+
+ return (err < 0) ? err : 0;
+}
+
+static int cis820x_config_intr(struct phy_device *phydev)
+{
+ int err;
+
+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+ err = phy_write(phydev, MII_CIS8201_IMASK,
+ MII_CIS8201_IMASK_MASK);
+ else
+ err = phy_write(phydev, MII_CIS8201_IMASK, 0);
+
+ return err;
+}
+
+/* Cicada 8201, a.k.a Vitesse VSC8201 */
+static struct phy_driver cis820x_driver[] = {
+{
+ .phy_id = 0x000fc410,
+ .name = "Cicada Cis8201",
+ .phy_id_mask = 0x000ffff0,
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = &cis820x_config_init,
+ .config_aneg = &genphy_config_aneg,
+ .read_status = &genphy_read_status,
+ .ack_interrupt = &cis820x_ack_interrupt,
+ .config_intr = &cis820x_config_intr,
+ .driver = { .owner = THIS_MODULE,},
+}, {
+ .phy_id = 0x000fc440,
+ .name = "Cicada Cis8204",
+ .phy_id_mask = 0x000fffc0,
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = &cis820x_config_init,
+ .config_aneg = &genphy_config_aneg,
+ .read_status = &genphy_read_status,
+ .ack_interrupt = &cis820x_ack_interrupt,
+ .config_intr = &cis820x_config_intr,
+ .driver = { .owner = THIS_MODULE,},
+} };
+
+module_phy_driver(cis820x_driver);
+
+static struct mdio_device_id __maybe_unused cicada_tbl[] = {
+ { 0x000fc410, 0x000ffff0 },
+ { 0x000fc440, 0x000fffc0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(mdio, cicada_tbl);
diff --git a/kernel/drivers/net/phy/davicom.c b/kernel/drivers/net/phy/davicom.c
new file mode 100644
index 000000000..0d16c7d9e
--- /dev/null
+++ b/kernel/drivers/net/phy/davicom.c
@@ -0,0 +1,194 @@
+/*
+ * drivers/net/phy/davicom.c
+ *
+ * Driver for Davicom PHYs
+ *
+ * Author: Andy Fleming
+ *
+ * Copyright (c) 2004 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/unistd.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+#define MII_DM9161_SCR 0x10
+#define MII_DM9161_SCR_INIT 0x0610
+#define MII_DM9161_SCR_RMII 0x0100
+
+/* DM9161 Interrupt Register */
+#define MII_DM9161_INTR 0x15
+#define MII_DM9161_INTR_PEND 0x8000
+#define MII_DM9161_INTR_DPLX_MASK 0x0800
+#define MII_DM9161_INTR_SPD_MASK 0x0400
+#define MII_DM9161_INTR_LINK_MASK 0x0200
+#define MII_DM9161_INTR_MASK 0x0100
+#define MII_DM9161_INTR_DPLX_CHANGE 0x0010
+#define MII_DM9161_INTR_SPD_CHANGE 0x0008
+#define MII_DM9161_INTR_LINK_CHANGE 0x0004
+#define MII_DM9161_INTR_INIT 0x0000
+#define MII_DM9161_INTR_STOP \
+(MII_DM9161_INTR_DPLX_MASK | MII_DM9161_INTR_SPD_MASK \
+ | MII_DM9161_INTR_LINK_MASK | MII_DM9161_INTR_MASK)
+
+/* DM9161 10BT Configuration/Status */
+#define MII_DM9161_10BTCSR 0x12
+#define MII_DM9161_10BTCSR_INIT 0x7800
+
+MODULE_DESCRIPTION("Davicom PHY driver");
+MODULE_AUTHOR("Andy Fleming");
+MODULE_LICENSE("GPL");
+
+
+#define DM9161_DELAY 1
+static int dm9161_config_intr(struct phy_device *phydev)
+{
+ int temp;
+
+ temp = phy_read(phydev, MII_DM9161_INTR);
+
+ if (temp < 0)
+ return temp;
+
+ if (PHY_INTERRUPT_ENABLED == phydev->interrupts)
+ temp &= ~(MII_DM9161_INTR_STOP);
+ else
+ temp |= MII_DM9161_INTR_STOP;
+
+ temp = phy_write(phydev, MII_DM9161_INTR, temp);
+
+ return temp;
+}
+
+static int dm9161_config_aneg(struct phy_device *phydev)
+{
+ int err;
+
+ /* Isolate the PHY */
+ err = phy_write(phydev, MII_BMCR, BMCR_ISOLATE);
+
+ if (err < 0)
+ return err;
+
+ /* Configure the new settings */
+ err = genphy_config_aneg(phydev);
+
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+static int dm9161_config_init(struct phy_device *phydev)
+{
+ int err, temp;
+
+ /* Isolate the PHY */
+ err = phy_write(phydev, MII_BMCR, BMCR_ISOLATE);
+
+ if (err < 0)
+ return err;
+
+ switch (phydev->interface) {
+ case PHY_INTERFACE_MODE_MII:
+ temp = MII_DM9161_SCR_INIT;
+ break;
+ case PHY_INTERFACE_MODE_RMII:
+ temp = MII_DM9161_SCR_INIT | MII_DM9161_SCR_RMII;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* Do not bypass the scrambler/descrambler */
+ err = phy_write(phydev, MII_DM9161_SCR, temp);
+ if (err < 0)
+ return err;
+
+ /* Clear 10BTCSR to default */
+ err = phy_write(phydev, MII_DM9161_10BTCSR, MII_DM9161_10BTCSR_INIT);
+
+ if (err < 0)
+ return err;
+
+ /* Reconnect the PHY, and enable Autonegotiation */
+ return phy_write(phydev, MII_BMCR, BMCR_ANENABLE);
+}
+
+static int dm9161_ack_interrupt(struct phy_device *phydev)
+{
+ int err = phy_read(phydev, MII_DM9161_INTR);
+
+ return (err < 0) ? err : 0;
+}
+
+static struct phy_driver dm91xx_driver[] = {
+{
+ .phy_id = 0x0181b880,
+ .name = "Davicom DM9161E",
+ .phy_id_mask = 0x0ffffff0,
+ .features = PHY_BASIC_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = dm9161_config_init,
+ .config_aneg = dm9161_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = dm9161_ack_interrupt,
+ .config_intr = dm9161_config_intr,
+ .driver = { .owner = THIS_MODULE,},
+}, {
+ .phy_id = 0x0181b8a0,
+ .name = "Davicom DM9161A",
+ .phy_id_mask = 0x0ffffff0,
+ .features = PHY_BASIC_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = dm9161_config_init,
+ .config_aneg = dm9161_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = dm9161_ack_interrupt,
+ .config_intr = dm9161_config_intr,
+ .driver = { .owner = THIS_MODULE,},
+}, {
+ .phy_id = 0x00181b80,
+ .name = "Davicom DM9131",
+ .phy_id_mask = 0x0ffffff0,
+ .features = PHY_BASIC_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = dm9161_ack_interrupt,
+ .config_intr = dm9161_config_intr,
+ .driver = { .owner = THIS_MODULE,},
+} };
+
+module_phy_driver(dm91xx_driver);
+
+static struct mdio_device_id __maybe_unused davicom_tbl[] = {
+ { 0x0181b880, 0x0ffffff0 },
+ { 0x0181b8a0, 0x0ffffff0 },
+ { 0x00181b80, 0x0ffffff0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(mdio, davicom_tbl);
diff --git a/kernel/drivers/net/phy/dp83640.c b/kernel/drivers/net/phy/dp83640.c
new file mode 100644
index 000000000..00cb41e71
--- /dev/null
+++ b/kernel/drivers/net/phy/dp83640.c
@@ -0,0 +1,1509 @@
+/*
+ * Driver for the National Semiconductor DP83640 PHYTER
+ *
+ * Copyright (C) 2010 OMICRON electronics GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/ethtool.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/mii.h>
+#include <linux/module.h>
+#include <linux/net_tstamp.h>
+#include <linux/netdevice.h>
+#include <linux/if_vlan.h>
+#include <linux/phy.h>
+#include <linux/ptp_classify.h>
+#include <linux/ptp_clock_kernel.h>
+
+#include "dp83640_reg.h"
+
+#define DP83640_PHY_ID 0x20005ce1
+#define PAGESEL 0x13
+#define LAYER4 0x02
+#define LAYER2 0x01
+#define MAX_RXTS 64
+#define N_EXT_TS 6
+#define N_PER_OUT 7
+#define PSF_PTPVER 2
+#define PSF_EVNT 0x4000
+#define PSF_RX 0x2000
+#define PSF_TX 0x1000
+#define EXT_EVENT 1
+#define CAL_EVENT 7
+#define CAL_TRIGGER 1
+#define DP83640_N_PINS 12
+
+#define MII_DP83640_MICR 0x11
+#define MII_DP83640_MISR 0x12
+
+#define MII_DP83640_MICR_OE 0x1
+#define MII_DP83640_MICR_IE 0x2
+
+#define MII_DP83640_MISR_RHF_INT_EN 0x01
+#define MII_DP83640_MISR_FHF_INT_EN 0x02
+#define MII_DP83640_MISR_ANC_INT_EN 0x04
+#define MII_DP83640_MISR_DUP_INT_EN 0x08
+#define MII_DP83640_MISR_SPD_INT_EN 0x10
+#define MII_DP83640_MISR_LINK_INT_EN 0x20
+#define MII_DP83640_MISR_ED_INT_EN 0x40
+#define MII_DP83640_MISR_LQ_INT_EN 0x80
+
+/* phyter seems to miss the mark by 16 ns */
+#define ADJTIME_FIX 16
+
+#if defined(__BIG_ENDIAN)
+#define ENDIAN_FLAG 0
+#elif defined(__LITTLE_ENDIAN)
+#define ENDIAN_FLAG PSF_ENDIAN
+#endif
+
+struct dp83640_skb_info {
+ int ptp_type;
+ unsigned long tmo;
+};
+
+struct phy_rxts {
+ u16 ns_lo; /* ns[15:0] */
+ u16 ns_hi; /* overflow[1:0], ns[29:16] */
+ u16 sec_lo; /* sec[15:0] */
+ u16 sec_hi; /* sec[31:16] */
+ u16 seqid; /* sequenceId[15:0] */
+ u16 msgtype; /* messageType[3:0], hash[11:0] */
+};
+
+struct phy_txts {
+ u16 ns_lo; /* ns[15:0] */
+ u16 ns_hi; /* overflow[1:0], ns[29:16] */
+ u16 sec_lo; /* sec[15:0] */
+ u16 sec_hi; /* sec[31:16] */
+};
+
+struct rxts {
+ struct list_head list;
+ unsigned long tmo;
+ u64 ns;
+ u16 seqid;
+ u8 msgtype;
+ u16 hash;
+};
+
+struct dp83640_clock;
+
+struct dp83640_private {
+ struct list_head list;
+ struct dp83640_clock *clock;
+ struct phy_device *phydev;
+ struct work_struct ts_work;
+ int hwts_tx_en;
+ int hwts_rx_en;
+ int layer;
+ int version;
+ /* remember state of cfg0 during calibration */
+ int cfg0;
+ /* remember the last event time stamp */
+ struct phy_txts edata;
+ /* list of rx timestamps */
+ struct list_head rxts;
+ struct list_head rxpool;
+ struct rxts rx_pool_data[MAX_RXTS];
+ /* protects above three fields from concurrent access */
+ spinlock_t rx_lock;
+ /* queues of incoming and outgoing packets */
+ struct sk_buff_head rx_queue;
+ struct sk_buff_head tx_queue;
+};
+
+struct dp83640_clock {
+ /* keeps the instance in the 'phyter_clocks' list */
+ struct list_head list;
+ /* we create one clock instance per MII bus */
+ struct mii_bus *bus;
+ /* protects extended registers from concurrent access */
+ struct mutex extreg_lock;
+ /* remembers which page was last selected */
+ int page;
+ /* our advertised capabilities */
+ struct ptp_clock_info caps;
+ /* protects the three fields below from concurrent access */
+ struct mutex clock_lock;
+ /* the one phyter from which we shall read */
+ struct dp83640_private *chosen;
+ /* list of the other attached phyters, not chosen */
+ struct list_head phylist;
+ /* reference to our PTP hardware clock */
+ struct ptp_clock *ptp_clock;
+};
+
+/* globals */
+
+enum {
+ CALIBRATE_GPIO,
+ PEROUT_GPIO,
+ EXTTS0_GPIO,
+ EXTTS1_GPIO,
+ EXTTS2_GPIO,
+ EXTTS3_GPIO,
+ EXTTS4_GPIO,
+ EXTTS5_GPIO,
+ GPIO_TABLE_SIZE
+};
+
+static int chosen_phy = -1;
+static ushort gpio_tab[GPIO_TABLE_SIZE] = {
+ 1, 2, 3, 4, 8, 9, 10, 11
+};
+
+module_param(chosen_phy, int, 0444);
+module_param_array(gpio_tab, ushort, NULL, 0444);
+
+MODULE_PARM_DESC(chosen_phy, \
+ "The address of the PHY to use for the ancillary clock features");
+MODULE_PARM_DESC(gpio_tab, \
+ "Which GPIO line to use for which purpose: cal,perout,extts1,...,extts6");
+
+static void dp83640_gpio_defaults(struct ptp_pin_desc *pd)
+{
+ int i, index;
+
+ for (i = 0; i < DP83640_N_PINS; i++) {
+ snprintf(pd[i].name, sizeof(pd[i].name), "GPIO%d", 1 + i);
+ pd[i].index = i;
+ }
+
+ for (i = 0; i < GPIO_TABLE_SIZE; i++) {
+ if (gpio_tab[i] < 1 || gpio_tab[i] > DP83640_N_PINS) {
+ pr_err("gpio_tab[%d]=%hu out of range", i, gpio_tab[i]);
+ return;
+ }
+ }
+
+ index = gpio_tab[CALIBRATE_GPIO] - 1;
+ pd[index].func = PTP_PF_PHYSYNC;
+ pd[index].chan = 0;
+
+ index = gpio_tab[PEROUT_GPIO] - 1;
+ pd[index].func = PTP_PF_PEROUT;
+ pd[index].chan = 0;
+
+ for (i = EXTTS0_GPIO; i < GPIO_TABLE_SIZE; i++) {
+ index = gpio_tab[i] - 1;
+ pd[index].func = PTP_PF_EXTTS;
+ pd[index].chan = i - EXTTS0_GPIO;
+ }
+}
+
+/* a list of clocks and a mutex to protect it */
+static LIST_HEAD(phyter_clocks);
+static DEFINE_MUTEX(phyter_clocks_lock);
+
+static void rx_timestamp_work(struct work_struct *work);
+
+/* extended register access functions */
+
+#define BROADCAST_ADDR 31
+
+static inline int broadcast_write(struct mii_bus *bus, u32 regnum, u16 val)
+{
+ return mdiobus_write(bus, BROADCAST_ADDR, regnum, val);
+}
+
+/* Caller must hold extreg_lock. */
+static int ext_read(struct phy_device *phydev, int page, u32 regnum)
+{
+ struct dp83640_private *dp83640 = phydev->priv;
+ int val;
+
+ if (dp83640->clock->page != page) {
+ broadcast_write(phydev->bus, PAGESEL, page);
+ dp83640->clock->page = page;
+ }
+ val = phy_read(phydev, regnum);
+
+ return val;
+}
+
+/* Caller must hold extreg_lock. */
+static void ext_write(int broadcast, struct phy_device *phydev,
+ int page, u32 regnum, u16 val)
+{
+ struct dp83640_private *dp83640 = phydev->priv;
+
+ if (dp83640->clock->page != page) {
+ broadcast_write(phydev->bus, PAGESEL, page);
+ dp83640->clock->page = page;
+ }
+ if (broadcast)
+ broadcast_write(phydev->bus, regnum, val);
+ else
+ phy_write(phydev, regnum, val);
+}
+
+/* Caller must hold extreg_lock. */
+static int tdr_write(int bc, struct phy_device *dev,
+ const struct timespec64 *ts, u16 cmd)
+{
+ ext_write(bc, dev, PAGE4, PTP_TDR, ts->tv_nsec & 0xffff);/* ns[15:0] */
+ ext_write(bc, dev, PAGE4, PTP_TDR, ts->tv_nsec >> 16); /* ns[31:16] */
+ ext_write(bc, dev, PAGE4, PTP_TDR, ts->tv_sec & 0xffff); /* sec[15:0] */
+ ext_write(bc, dev, PAGE4, PTP_TDR, ts->tv_sec >> 16); /* sec[31:16]*/
+
+ ext_write(bc, dev, PAGE4, PTP_CTL, cmd);
+
+ return 0;
+}
+
+/* convert phy timestamps into driver timestamps */
+
+static void phy2rxts(struct phy_rxts *p, struct rxts *rxts)
+{
+ u32 sec;
+
+ sec = p->sec_lo;
+ sec |= p->sec_hi << 16;
+
+ rxts->ns = p->ns_lo;
+ rxts->ns |= (p->ns_hi & 0x3fff) << 16;
+ rxts->ns += ((u64)sec) * 1000000000ULL;
+ rxts->seqid = p->seqid;
+ rxts->msgtype = (p->msgtype >> 12) & 0xf;
+ rxts->hash = p->msgtype & 0x0fff;
+ rxts->tmo = jiffies + 2;
+}
+
+static u64 phy2txts(struct phy_txts *p)
+{
+ u64 ns;
+ u32 sec;
+
+ sec = p->sec_lo;
+ sec |= p->sec_hi << 16;
+
+ ns = p->ns_lo;
+ ns |= (p->ns_hi & 0x3fff) << 16;
+ ns += ((u64)sec) * 1000000000ULL;
+
+ return ns;
+}
+
+static int periodic_output(struct dp83640_clock *clock,
+ struct ptp_clock_request *clkreq, bool on,
+ int trigger)
+{
+ struct dp83640_private *dp83640 = clock->chosen;
+ struct phy_device *phydev = dp83640->phydev;
+ u32 sec, nsec, pwidth;
+ u16 gpio, ptp_trig, val;
+
+ if (on) {
+ gpio = 1 + ptp_find_pin(clock->ptp_clock, PTP_PF_PEROUT,
+ trigger);
+ if (gpio < 1)
+ return -EINVAL;
+ } else {
+ gpio = 0;
+ }
+
+ ptp_trig = TRIG_WR |
+ (trigger & TRIG_CSEL_MASK) << TRIG_CSEL_SHIFT |
+ (gpio & TRIG_GPIO_MASK) << TRIG_GPIO_SHIFT |
+ TRIG_PER |
+ TRIG_PULSE;
+
+ val = (trigger & TRIG_SEL_MASK) << TRIG_SEL_SHIFT;
+
+ if (!on) {
+ val |= TRIG_DIS;
+ mutex_lock(&clock->extreg_lock);
+ ext_write(0, phydev, PAGE5, PTP_TRIG, ptp_trig);
+ ext_write(0, phydev, PAGE4, PTP_CTL, val);
+ mutex_unlock(&clock->extreg_lock);
+ return 0;
+ }
+
+ sec = clkreq->perout.start.sec;
+ nsec = clkreq->perout.start.nsec;
+ pwidth = clkreq->perout.period.sec * 1000000000UL;
+ pwidth += clkreq->perout.period.nsec;
+ pwidth /= 2;
+
+ mutex_lock(&clock->extreg_lock);
+
+ ext_write(0, phydev, PAGE5, PTP_TRIG, ptp_trig);
+
+ /*load trigger*/
+ val |= TRIG_LOAD;
+ ext_write(0, phydev, PAGE4, PTP_CTL, val);
+ ext_write(0, phydev, PAGE4, PTP_TDR, nsec & 0xffff); /* ns[15:0] */
+ ext_write(0, phydev, PAGE4, PTP_TDR, nsec >> 16); /* ns[31:16] */
+ ext_write(0, phydev, PAGE4, PTP_TDR, sec & 0xffff); /* sec[15:0] */
+ ext_write(0, phydev, PAGE4, PTP_TDR, sec >> 16); /* sec[31:16] */
+ ext_write(0, phydev, PAGE4, PTP_TDR, pwidth & 0xffff); /* ns[15:0] */
+ ext_write(0, phydev, PAGE4, PTP_TDR, pwidth >> 16); /* ns[31:16] */
+ /* Triggers 0 and 1 has programmable pulsewidth2 */
+ if (trigger < 2) {
+ ext_write(0, phydev, PAGE4, PTP_TDR, pwidth & 0xffff);
+ ext_write(0, phydev, PAGE4, PTP_TDR, pwidth >> 16);
+ }
+
+ /*enable trigger*/
+ val &= ~TRIG_LOAD;
+ val |= TRIG_EN;
+ ext_write(0, phydev, PAGE4, PTP_CTL, val);
+
+ mutex_unlock(&clock->extreg_lock);
+ return 0;
+}
+
+/* ptp clock methods */
+
+static int ptp_dp83640_adjfreq(struct ptp_clock_info *ptp, s32 ppb)
+{
+ struct dp83640_clock *clock =
+ container_of(ptp, struct dp83640_clock, caps);
+ struct phy_device *phydev = clock->chosen->phydev;
+ u64 rate;
+ int neg_adj = 0;
+ u16 hi, lo;
+
+ if (ppb < 0) {
+ neg_adj = 1;
+ ppb = -ppb;
+ }
+ rate = ppb;
+ rate <<= 26;
+ rate = div_u64(rate, 1953125);
+
+ hi = (rate >> 16) & PTP_RATE_HI_MASK;
+ if (neg_adj)
+ hi |= PTP_RATE_DIR;
+
+ lo = rate & 0xffff;
+
+ mutex_lock(&clock->extreg_lock);
+
+ ext_write(1, phydev, PAGE4, PTP_RATEH, hi);
+ ext_write(1, phydev, PAGE4, PTP_RATEL, lo);
+
+ mutex_unlock(&clock->extreg_lock);
+
+ return 0;
+}
+
+static int ptp_dp83640_adjtime(struct ptp_clock_info *ptp, s64 delta)
+{
+ struct dp83640_clock *clock =
+ container_of(ptp, struct dp83640_clock, caps);
+ struct phy_device *phydev = clock->chosen->phydev;
+ struct timespec64 ts;
+ int err;
+
+ delta += ADJTIME_FIX;
+
+ ts = ns_to_timespec64(delta);
+
+ mutex_lock(&clock->extreg_lock);
+
+ err = tdr_write(1, phydev, &ts, PTP_STEP_CLK);
+
+ mutex_unlock(&clock->extreg_lock);
+
+ return err;
+}
+
+static int ptp_dp83640_gettime(struct ptp_clock_info *ptp,
+ struct timespec64 *ts)
+{
+ struct dp83640_clock *clock =
+ container_of(ptp, struct dp83640_clock, caps);
+ struct phy_device *phydev = clock->chosen->phydev;
+ unsigned int val[4];
+
+ mutex_lock(&clock->extreg_lock);
+
+ ext_write(0, phydev, PAGE4, PTP_CTL, PTP_RD_CLK);
+
+ val[0] = ext_read(phydev, PAGE4, PTP_TDR); /* ns[15:0] */
+ val[1] = ext_read(phydev, PAGE4, PTP_TDR); /* ns[31:16] */
+ val[2] = ext_read(phydev, PAGE4, PTP_TDR); /* sec[15:0] */
+ val[3] = ext_read(phydev, PAGE4, PTP_TDR); /* sec[31:16] */
+
+ mutex_unlock(&clock->extreg_lock);
+
+ ts->tv_nsec = val[0] | (val[1] << 16);
+ ts->tv_sec = val[2] | (val[3] << 16);
+
+ return 0;
+}
+
+static int ptp_dp83640_settime(struct ptp_clock_info *ptp,
+ const struct timespec64 *ts)
+{
+ struct dp83640_clock *clock =
+ container_of(ptp, struct dp83640_clock, caps);
+ struct phy_device *phydev = clock->chosen->phydev;
+ int err;
+
+ mutex_lock(&clock->extreg_lock);
+
+ err = tdr_write(1, phydev, ts, PTP_LOAD_CLK);
+
+ mutex_unlock(&clock->extreg_lock);
+
+ return err;
+}
+
+static int ptp_dp83640_enable(struct ptp_clock_info *ptp,
+ struct ptp_clock_request *rq, int on)
+{
+ struct dp83640_clock *clock =
+ container_of(ptp, struct dp83640_clock, caps);
+ struct phy_device *phydev = clock->chosen->phydev;
+ unsigned int index;
+ u16 evnt, event_num, gpio_num;
+
+ switch (rq->type) {
+ case PTP_CLK_REQ_EXTTS:
+ index = rq->extts.index;
+ if (index >= N_EXT_TS)
+ return -EINVAL;
+ event_num = EXT_EVENT + index;
+ evnt = EVNT_WR | (event_num & EVNT_SEL_MASK) << EVNT_SEL_SHIFT;
+ if (on) {
+ gpio_num = 1 + ptp_find_pin(clock->ptp_clock,
+ PTP_PF_EXTTS, index);
+ if (gpio_num < 1)
+ return -EINVAL;
+ evnt |= (gpio_num & EVNT_GPIO_MASK) << EVNT_GPIO_SHIFT;
+ if (rq->extts.flags & PTP_FALLING_EDGE)
+ evnt |= EVNT_FALL;
+ else
+ evnt |= EVNT_RISE;
+ }
+ mutex_lock(&clock->extreg_lock);
+ ext_write(0, phydev, PAGE5, PTP_EVNT, evnt);
+ mutex_unlock(&clock->extreg_lock);
+ return 0;
+
+ case PTP_CLK_REQ_PEROUT:
+ if (rq->perout.index >= N_PER_OUT)
+ return -EINVAL;
+ return periodic_output(clock, rq, on, rq->perout.index);
+
+ default:
+ break;
+ }
+
+ return -EOPNOTSUPP;
+}
+
+static int ptp_dp83640_verify(struct ptp_clock_info *ptp, unsigned int pin,
+ enum ptp_pin_function func, unsigned int chan)
+{
+ struct dp83640_clock *clock =
+ container_of(ptp, struct dp83640_clock, caps);
+
+ if (clock->caps.pin_config[pin].func == PTP_PF_PHYSYNC &&
+ !list_empty(&clock->phylist))
+ return 1;
+
+ if (func == PTP_PF_PHYSYNC)
+ return 1;
+
+ return 0;
+}
+
+static u8 status_frame_dst[6] = { 0x01, 0x1B, 0x19, 0x00, 0x00, 0x00 };
+static u8 status_frame_src[6] = { 0x08, 0x00, 0x17, 0x0B, 0x6B, 0x0F };
+
+static void enable_status_frames(struct phy_device *phydev, bool on)
+{
+ struct dp83640_private *dp83640 = phydev->priv;
+ struct dp83640_clock *clock = dp83640->clock;
+ u16 cfg0 = 0, ver;
+
+ if (on)
+ cfg0 = PSF_EVNT_EN | PSF_RXTS_EN | PSF_TXTS_EN | ENDIAN_FLAG;
+
+ ver = (PSF_PTPVER & VERSIONPTP_MASK) << VERSIONPTP_SHIFT;
+
+ mutex_lock(&clock->extreg_lock);
+
+ ext_write(0, phydev, PAGE5, PSF_CFG0, cfg0);
+ ext_write(0, phydev, PAGE6, PSF_CFG1, ver);
+
+ mutex_unlock(&clock->extreg_lock);
+
+ if (!phydev->attached_dev) {
+ pr_warn("expected to find an attached netdevice\n");
+ return;
+ }
+
+ if (on) {
+ if (dev_mc_add(phydev->attached_dev, status_frame_dst))
+ pr_warn("failed to add mc address\n");
+ } else {
+ if (dev_mc_del(phydev->attached_dev, status_frame_dst))
+ pr_warn("failed to delete mc address\n");
+ }
+}
+
+static bool is_status_frame(struct sk_buff *skb, int type)
+{
+ struct ethhdr *h = eth_hdr(skb);
+
+ if (PTP_CLASS_V2_L2 == type &&
+ !memcmp(h->h_source, status_frame_src, sizeof(status_frame_src)))
+ return true;
+ else
+ return false;
+}
+
+static int expired(struct rxts *rxts)
+{
+ return time_after(jiffies, rxts->tmo);
+}
+
+/* Caller must hold rx_lock. */
+static void prune_rx_ts(struct dp83640_private *dp83640)
+{
+ struct list_head *this, *next;
+ struct rxts *rxts;
+
+ list_for_each_safe(this, next, &dp83640->rxts) {
+ rxts = list_entry(this, struct rxts, list);
+ if (expired(rxts)) {
+ list_del_init(&rxts->list);
+ list_add(&rxts->list, &dp83640->rxpool);
+ }
+ }
+}
+
+/* synchronize the phyters so they act as one clock */
+
+static void enable_broadcast(struct phy_device *phydev, int init_page, int on)
+{
+ int val;
+ phy_write(phydev, PAGESEL, 0);
+ val = phy_read(phydev, PHYCR2);
+ if (on)
+ val |= BC_WRITE;
+ else
+ val &= ~BC_WRITE;
+ phy_write(phydev, PHYCR2, val);
+ phy_write(phydev, PAGESEL, init_page);
+}
+
+static void recalibrate(struct dp83640_clock *clock)
+{
+ s64 now, diff;
+ struct phy_txts event_ts;
+ struct timespec64 ts;
+ struct list_head *this;
+ struct dp83640_private *tmp;
+ struct phy_device *master = clock->chosen->phydev;
+ u16 cal_gpio, cfg0, evnt, ptp_trig, trigger, val;
+
+ trigger = CAL_TRIGGER;
+ cal_gpio = 1 + ptp_find_pin(clock->ptp_clock, PTP_PF_PHYSYNC, 0);
+ if (cal_gpio < 1) {
+ pr_err("PHY calibration pin not available - PHY is not calibrated.");
+ return;
+ }
+
+ mutex_lock(&clock->extreg_lock);
+
+ /*
+ * enable broadcast, disable status frames, enable ptp clock
+ */
+ list_for_each(this, &clock->phylist) {
+ tmp = list_entry(this, struct dp83640_private, list);
+ enable_broadcast(tmp->phydev, clock->page, 1);
+ tmp->cfg0 = ext_read(tmp->phydev, PAGE5, PSF_CFG0);
+ ext_write(0, tmp->phydev, PAGE5, PSF_CFG0, 0);
+ ext_write(0, tmp->phydev, PAGE4, PTP_CTL, PTP_ENABLE);
+ }
+ enable_broadcast(master, clock->page, 1);
+ cfg0 = ext_read(master, PAGE5, PSF_CFG0);
+ ext_write(0, master, PAGE5, PSF_CFG0, 0);
+ ext_write(0, master, PAGE4, PTP_CTL, PTP_ENABLE);
+
+ /*
+ * enable an event timestamp
+ */
+ evnt = EVNT_WR | EVNT_RISE | EVNT_SINGLE;
+ evnt |= (CAL_EVENT & EVNT_SEL_MASK) << EVNT_SEL_SHIFT;
+ evnt |= (cal_gpio & EVNT_GPIO_MASK) << EVNT_GPIO_SHIFT;
+
+ list_for_each(this, &clock->phylist) {
+ tmp = list_entry(this, struct dp83640_private, list);
+ ext_write(0, tmp->phydev, PAGE5, PTP_EVNT, evnt);
+ }
+ ext_write(0, master, PAGE5, PTP_EVNT, evnt);
+
+ /*
+ * configure a trigger
+ */
+ ptp_trig = TRIG_WR | TRIG_IF_LATE | TRIG_PULSE;
+ ptp_trig |= (trigger & TRIG_CSEL_MASK) << TRIG_CSEL_SHIFT;
+ ptp_trig |= (cal_gpio & TRIG_GPIO_MASK) << TRIG_GPIO_SHIFT;
+ ext_write(0, master, PAGE5, PTP_TRIG, ptp_trig);
+
+ /* load trigger */
+ val = (trigger & TRIG_SEL_MASK) << TRIG_SEL_SHIFT;
+ val |= TRIG_LOAD;
+ ext_write(0, master, PAGE4, PTP_CTL, val);
+
+ /* enable trigger */
+ val &= ~TRIG_LOAD;
+ val |= TRIG_EN;
+ ext_write(0, master, PAGE4, PTP_CTL, val);
+
+ /* disable trigger */
+ val = (trigger & TRIG_SEL_MASK) << TRIG_SEL_SHIFT;
+ val |= TRIG_DIS;
+ ext_write(0, master, PAGE4, PTP_CTL, val);
+
+ /*
+ * read out and correct offsets
+ */
+ val = ext_read(master, PAGE4, PTP_STS);
+ pr_info("master PTP_STS 0x%04hx\n", val);
+ val = ext_read(master, PAGE4, PTP_ESTS);
+ pr_info("master PTP_ESTS 0x%04hx\n", val);
+ event_ts.ns_lo = ext_read(master, PAGE4, PTP_EDATA);
+ event_ts.ns_hi = ext_read(master, PAGE4, PTP_EDATA);
+ event_ts.sec_lo = ext_read(master, PAGE4, PTP_EDATA);
+ event_ts.sec_hi = ext_read(master, PAGE4, PTP_EDATA);
+ now = phy2txts(&event_ts);
+
+ list_for_each(this, &clock->phylist) {
+ tmp = list_entry(this, struct dp83640_private, list);
+ val = ext_read(tmp->phydev, PAGE4, PTP_STS);
+ pr_info("slave PTP_STS 0x%04hx\n", val);
+ val = ext_read(tmp->phydev, PAGE4, PTP_ESTS);
+ pr_info("slave PTP_ESTS 0x%04hx\n", val);
+ event_ts.ns_lo = ext_read(tmp->phydev, PAGE4, PTP_EDATA);
+ event_ts.ns_hi = ext_read(tmp->phydev, PAGE4, PTP_EDATA);
+ event_ts.sec_lo = ext_read(tmp->phydev, PAGE4, PTP_EDATA);
+ event_ts.sec_hi = ext_read(tmp->phydev, PAGE4, PTP_EDATA);
+ diff = now - (s64) phy2txts(&event_ts);
+ pr_info("slave offset %lld nanoseconds\n", diff);
+ diff += ADJTIME_FIX;
+ ts = ns_to_timespec64(diff);
+ tdr_write(0, tmp->phydev, &ts, PTP_STEP_CLK);
+ }
+
+ /*
+ * restore status frames
+ */
+ list_for_each(this, &clock->phylist) {
+ tmp = list_entry(this, struct dp83640_private, list);
+ ext_write(0, tmp->phydev, PAGE5, PSF_CFG0, tmp->cfg0);
+ }
+ ext_write(0, master, PAGE5, PSF_CFG0, cfg0);
+
+ mutex_unlock(&clock->extreg_lock);
+}
+
+/* time stamping methods */
+
+static inline u16 exts_chan_to_edata(int ch)
+{
+ return 1 << ((ch + EXT_EVENT) * 2);
+}
+
+static int decode_evnt(struct dp83640_private *dp83640,
+ void *data, int len, u16 ests)
+{
+ struct phy_txts *phy_txts;
+ struct ptp_clock_event event;
+ int i, parsed;
+ int words = (ests >> EVNT_TS_LEN_SHIFT) & EVNT_TS_LEN_MASK;
+ u16 ext_status = 0;
+
+ /* calculate length of the event timestamp status message */
+ if (ests & MULT_EVNT)
+ parsed = (words + 2) * sizeof(u16);
+ else
+ parsed = (words + 1) * sizeof(u16);
+
+ /* check if enough data is available */
+ if (len < parsed)
+ return len;
+
+ if (ests & MULT_EVNT) {
+ ext_status = *(u16 *) data;
+ data += sizeof(ext_status);
+ }
+
+ phy_txts = data;
+
+ switch (words) { /* fall through in every case */
+ case 3:
+ dp83640->edata.sec_hi = phy_txts->sec_hi;
+ case 2:
+ dp83640->edata.sec_lo = phy_txts->sec_lo;
+ case 1:
+ dp83640->edata.ns_hi = phy_txts->ns_hi;
+ case 0:
+ dp83640->edata.ns_lo = phy_txts->ns_lo;
+ }
+
+ if (!ext_status) {
+ i = ((ests >> EVNT_NUM_SHIFT) & EVNT_NUM_MASK) - EXT_EVENT;
+ ext_status = exts_chan_to_edata(i);
+ }
+
+ event.type = PTP_CLOCK_EXTTS;
+ event.timestamp = phy2txts(&dp83640->edata);
+
+ /* Compensate for input path and synchronization delays */
+ event.timestamp -= 35;
+
+ for (i = 0; i < N_EXT_TS; i++) {
+ if (ext_status & exts_chan_to_edata(i)) {
+ event.index = i;
+ ptp_clock_event(dp83640->clock->ptp_clock, &event);
+ }
+ }
+
+ return parsed;
+}
+
+static int match(struct sk_buff *skb, unsigned int type, struct rxts *rxts)
+{
+ u16 *seqid;
+ unsigned int offset = 0;
+ u8 *msgtype, *data = skb_mac_header(skb);
+
+ /* check sequenceID, messageType, 12 bit hash of offset 20-29 */
+
+ if (type & PTP_CLASS_VLAN)
+ offset += VLAN_HLEN;
+
+ switch (type & PTP_CLASS_PMASK) {
+ case PTP_CLASS_IPV4:
+ offset += ETH_HLEN + IPV4_HLEN(data + offset) + UDP_HLEN;
+ break;
+ case PTP_CLASS_IPV6:
+ offset += ETH_HLEN + IP6_HLEN + UDP_HLEN;
+ break;
+ case PTP_CLASS_L2:
+ offset += ETH_HLEN;
+ break;
+ default:
+ return 0;
+ }
+
+ if (skb->len + ETH_HLEN < offset + OFF_PTP_SEQUENCE_ID + sizeof(*seqid))
+ return 0;
+
+ if (unlikely(type & PTP_CLASS_V1))
+ msgtype = data + offset + OFF_PTP_CONTROL;
+ else
+ msgtype = data + offset;
+
+ seqid = (u16 *)(data + offset + OFF_PTP_SEQUENCE_ID);
+
+ return rxts->msgtype == (*msgtype & 0xf) &&
+ rxts->seqid == ntohs(*seqid);
+}
+
+static void decode_rxts(struct dp83640_private *dp83640,
+ struct phy_rxts *phy_rxts)
+{
+ struct rxts *rxts;
+ struct skb_shared_hwtstamps *shhwtstamps = NULL;
+ struct sk_buff *skb;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dp83640->rx_lock, flags);
+
+ prune_rx_ts(dp83640);
+
+ if (list_empty(&dp83640->rxpool)) {
+ pr_debug("rx timestamp pool is empty\n");
+ goto out;
+ }
+ rxts = list_first_entry(&dp83640->rxpool, struct rxts, list);
+ list_del_init(&rxts->list);
+ phy2rxts(phy_rxts, rxts);
+
+ spin_lock(&dp83640->rx_queue.lock);
+ skb_queue_walk(&dp83640->rx_queue, skb) {
+ struct dp83640_skb_info *skb_info;
+
+ skb_info = (struct dp83640_skb_info *)skb->cb;
+ if (match(skb, skb_info->ptp_type, rxts)) {
+ __skb_unlink(skb, &dp83640->rx_queue);
+ shhwtstamps = skb_hwtstamps(skb);
+ memset(shhwtstamps, 0, sizeof(*shhwtstamps));
+ shhwtstamps->hwtstamp = ns_to_ktime(rxts->ns);
+ netif_rx_ni(skb);
+ list_add(&rxts->list, &dp83640->rxpool);
+ break;
+ }
+ }
+ spin_unlock(&dp83640->rx_queue.lock);
+
+ if (!shhwtstamps)
+ list_add_tail(&rxts->list, &dp83640->rxts);
+out:
+ spin_unlock_irqrestore(&dp83640->rx_lock, flags);
+}
+
+static void decode_txts(struct dp83640_private *dp83640,
+ struct phy_txts *phy_txts)
+{
+ struct skb_shared_hwtstamps shhwtstamps;
+ struct sk_buff *skb;
+ u64 ns;
+
+ /* We must already have the skb that triggered this. */
+
+ skb = skb_dequeue(&dp83640->tx_queue);
+
+ if (!skb) {
+ pr_debug("have timestamp but tx_queue empty\n");
+ return;
+ }
+ ns = phy2txts(phy_txts);
+ memset(&shhwtstamps, 0, sizeof(shhwtstamps));
+ shhwtstamps.hwtstamp = ns_to_ktime(ns);
+ skb_complete_tx_timestamp(skb, &shhwtstamps);
+}
+
+static void decode_status_frame(struct dp83640_private *dp83640,
+ struct sk_buff *skb)
+{
+ struct phy_rxts *phy_rxts;
+ struct phy_txts *phy_txts;
+ u8 *ptr;
+ int len, size;
+ u16 ests, type;
+
+ ptr = skb->data + 2;
+
+ for (len = skb_headlen(skb) - 2; len > sizeof(type); len -= size) {
+
+ type = *(u16 *)ptr;
+ ests = type & 0x0fff;
+ type = type & 0xf000;
+ len -= sizeof(type);
+ ptr += sizeof(type);
+
+ if (PSF_RX == type && len >= sizeof(*phy_rxts)) {
+
+ phy_rxts = (struct phy_rxts *) ptr;
+ decode_rxts(dp83640, phy_rxts);
+ size = sizeof(*phy_rxts);
+
+ } else if (PSF_TX == type && len >= sizeof(*phy_txts)) {
+
+ phy_txts = (struct phy_txts *) ptr;
+ decode_txts(dp83640, phy_txts);
+ size = sizeof(*phy_txts);
+
+ } else if (PSF_EVNT == type) {
+
+ size = decode_evnt(dp83640, ptr, len, ests);
+
+ } else {
+ size = 0;
+ break;
+ }
+ ptr += size;
+ }
+}
+
+static int is_sync(struct sk_buff *skb, int type)
+{
+ u8 *data = skb->data, *msgtype;
+ unsigned int offset = 0;
+
+ if (type & PTP_CLASS_VLAN)
+ offset += VLAN_HLEN;
+
+ switch (type & PTP_CLASS_PMASK) {
+ case PTP_CLASS_IPV4:
+ offset += ETH_HLEN + IPV4_HLEN(data + offset) + UDP_HLEN;
+ break;
+ case PTP_CLASS_IPV6:
+ offset += ETH_HLEN + IP6_HLEN + UDP_HLEN;
+ break;
+ case PTP_CLASS_L2:
+ offset += ETH_HLEN;
+ break;
+ default:
+ return 0;
+ }
+
+ if (type & PTP_CLASS_V1)
+ offset += OFF_PTP_CONTROL;
+
+ if (skb->len < offset + 1)
+ return 0;
+
+ msgtype = data + offset;
+
+ return (*msgtype & 0xf) == 0;
+}
+
+static void dp83640_free_clocks(void)
+{
+ struct dp83640_clock *clock;
+ struct list_head *this, *next;
+
+ mutex_lock(&phyter_clocks_lock);
+
+ list_for_each_safe(this, next, &phyter_clocks) {
+ clock = list_entry(this, struct dp83640_clock, list);
+ if (!list_empty(&clock->phylist)) {
+ pr_warn("phy list non-empty while unloading\n");
+ BUG();
+ }
+ list_del(&clock->list);
+ mutex_destroy(&clock->extreg_lock);
+ mutex_destroy(&clock->clock_lock);
+ put_device(&clock->bus->dev);
+ kfree(clock->caps.pin_config);
+ kfree(clock);
+ }
+
+ mutex_unlock(&phyter_clocks_lock);
+}
+
+static void dp83640_clock_init(struct dp83640_clock *clock, struct mii_bus *bus)
+{
+ INIT_LIST_HEAD(&clock->list);
+ clock->bus = bus;
+ mutex_init(&clock->extreg_lock);
+ mutex_init(&clock->clock_lock);
+ INIT_LIST_HEAD(&clock->phylist);
+ clock->caps.owner = THIS_MODULE;
+ sprintf(clock->caps.name, "dp83640 timer");
+ clock->caps.max_adj = 1953124;
+ clock->caps.n_alarm = 0;
+ clock->caps.n_ext_ts = N_EXT_TS;
+ clock->caps.n_per_out = N_PER_OUT;
+ clock->caps.n_pins = DP83640_N_PINS;
+ clock->caps.pps = 0;
+ clock->caps.adjfreq = ptp_dp83640_adjfreq;
+ clock->caps.adjtime = ptp_dp83640_adjtime;
+ clock->caps.gettime64 = ptp_dp83640_gettime;
+ clock->caps.settime64 = ptp_dp83640_settime;
+ clock->caps.enable = ptp_dp83640_enable;
+ clock->caps.verify = ptp_dp83640_verify;
+ /*
+ * Convert the module param defaults into a dynamic pin configuration.
+ */
+ dp83640_gpio_defaults(clock->caps.pin_config);
+ /*
+ * Get a reference to this bus instance.
+ */
+ get_device(&bus->dev);
+}
+
+static int choose_this_phy(struct dp83640_clock *clock,
+ struct phy_device *phydev)
+{
+ if (chosen_phy == -1 && !clock->chosen)
+ return 1;
+
+ if (chosen_phy == phydev->addr)
+ return 1;
+
+ return 0;
+}
+
+static struct dp83640_clock *dp83640_clock_get(struct dp83640_clock *clock)
+{
+ if (clock)
+ mutex_lock(&clock->clock_lock);
+ return clock;
+}
+
+/*
+ * Look up and lock a clock by bus instance.
+ * If there is no clock for this bus, then create it first.
+ */
+static struct dp83640_clock *dp83640_clock_get_bus(struct mii_bus *bus)
+{
+ struct dp83640_clock *clock = NULL, *tmp;
+ struct list_head *this;
+
+ mutex_lock(&phyter_clocks_lock);
+
+ list_for_each(this, &phyter_clocks) {
+ tmp = list_entry(this, struct dp83640_clock, list);
+ if (tmp->bus == bus) {
+ clock = tmp;
+ break;
+ }
+ }
+ if (clock)
+ goto out;
+
+ clock = kzalloc(sizeof(struct dp83640_clock), GFP_KERNEL);
+ if (!clock)
+ goto out;
+
+ clock->caps.pin_config = kzalloc(sizeof(struct ptp_pin_desc) *
+ DP83640_N_PINS, GFP_KERNEL);
+ if (!clock->caps.pin_config) {
+ kfree(clock);
+ clock = NULL;
+ goto out;
+ }
+ dp83640_clock_init(clock, bus);
+ list_add_tail(&phyter_clocks, &clock->list);
+out:
+ mutex_unlock(&phyter_clocks_lock);
+
+ return dp83640_clock_get(clock);
+}
+
+static void dp83640_clock_put(struct dp83640_clock *clock)
+{
+ mutex_unlock(&clock->clock_lock);
+}
+
+static int dp83640_probe(struct phy_device *phydev)
+{
+ struct dp83640_clock *clock;
+ struct dp83640_private *dp83640;
+ int err = -ENOMEM, i;
+
+ if (phydev->addr == BROADCAST_ADDR)
+ return 0;
+
+ clock = dp83640_clock_get_bus(phydev->bus);
+ if (!clock)
+ goto no_clock;
+
+ dp83640 = kzalloc(sizeof(struct dp83640_private), GFP_KERNEL);
+ if (!dp83640)
+ goto no_memory;
+
+ dp83640->phydev = phydev;
+ INIT_WORK(&dp83640->ts_work, rx_timestamp_work);
+
+ INIT_LIST_HEAD(&dp83640->rxts);
+ INIT_LIST_HEAD(&dp83640->rxpool);
+ for (i = 0; i < MAX_RXTS; i++)
+ list_add(&dp83640->rx_pool_data[i].list, &dp83640->rxpool);
+
+ phydev->priv = dp83640;
+
+ spin_lock_init(&dp83640->rx_lock);
+ skb_queue_head_init(&dp83640->rx_queue);
+ skb_queue_head_init(&dp83640->tx_queue);
+
+ dp83640->clock = clock;
+
+ if (choose_this_phy(clock, phydev)) {
+ clock->chosen = dp83640;
+ clock->ptp_clock = ptp_clock_register(&clock->caps, &phydev->dev);
+ if (IS_ERR(clock->ptp_clock)) {
+ err = PTR_ERR(clock->ptp_clock);
+ goto no_register;
+ }
+ } else
+ list_add_tail(&dp83640->list, &clock->phylist);
+
+ dp83640_clock_put(clock);
+ return 0;
+
+no_register:
+ clock->chosen = NULL;
+ kfree(dp83640);
+no_memory:
+ dp83640_clock_put(clock);
+no_clock:
+ return err;
+}
+
+static void dp83640_remove(struct phy_device *phydev)
+{
+ struct dp83640_clock *clock;
+ struct list_head *this, *next;
+ struct dp83640_private *tmp, *dp83640 = phydev->priv;
+
+ if (phydev->addr == BROADCAST_ADDR)
+ return;
+
+ enable_status_frames(phydev, false);
+ cancel_work_sync(&dp83640->ts_work);
+
+ skb_queue_purge(&dp83640->rx_queue);
+ skb_queue_purge(&dp83640->tx_queue);
+
+ clock = dp83640_clock_get(dp83640->clock);
+
+ if (dp83640 == clock->chosen) {
+ ptp_clock_unregister(clock->ptp_clock);
+ clock->chosen = NULL;
+ } else {
+ list_for_each_safe(this, next, &clock->phylist) {
+ tmp = list_entry(this, struct dp83640_private, list);
+ if (tmp == dp83640) {
+ list_del_init(&tmp->list);
+ break;
+ }
+ }
+ }
+
+ dp83640_clock_put(clock);
+ kfree(dp83640);
+}
+
+static int dp83640_config_init(struct phy_device *phydev)
+{
+ struct dp83640_private *dp83640 = phydev->priv;
+ struct dp83640_clock *clock = dp83640->clock;
+
+ if (clock->chosen && !list_empty(&clock->phylist))
+ recalibrate(clock);
+ else {
+ mutex_lock(&clock->extreg_lock);
+ enable_broadcast(phydev, clock->page, 1);
+ mutex_unlock(&clock->extreg_lock);
+ }
+
+ enable_status_frames(phydev, true);
+
+ mutex_lock(&clock->extreg_lock);
+ ext_write(0, phydev, PAGE4, PTP_CTL, PTP_ENABLE);
+ mutex_unlock(&clock->extreg_lock);
+
+ return 0;
+}
+
+static int dp83640_ack_interrupt(struct phy_device *phydev)
+{
+ int err = phy_read(phydev, MII_DP83640_MISR);
+
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+static int dp83640_config_intr(struct phy_device *phydev)
+{
+ int micr;
+ int misr;
+ int err;
+
+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+ misr = phy_read(phydev, MII_DP83640_MISR);
+ if (misr < 0)
+ return misr;
+ misr |=
+ (MII_DP83640_MISR_ANC_INT_EN |
+ MII_DP83640_MISR_DUP_INT_EN |
+ MII_DP83640_MISR_SPD_INT_EN |
+ MII_DP83640_MISR_LINK_INT_EN);
+ err = phy_write(phydev, MII_DP83640_MISR, misr);
+ if (err < 0)
+ return err;
+
+ micr = phy_read(phydev, MII_DP83640_MICR);
+ if (micr < 0)
+ return micr;
+ micr |=
+ (MII_DP83640_MICR_OE |
+ MII_DP83640_MICR_IE);
+ return phy_write(phydev, MII_DP83640_MICR, micr);
+ } else {
+ micr = phy_read(phydev, MII_DP83640_MICR);
+ if (micr < 0)
+ return micr;
+ micr &=
+ ~(MII_DP83640_MICR_OE |
+ MII_DP83640_MICR_IE);
+ err = phy_write(phydev, MII_DP83640_MICR, micr);
+ if (err < 0)
+ return err;
+
+ misr = phy_read(phydev, MII_DP83640_MISR);
+ if (misr < 0)
+ return misr;
+ misr &=
+ ~(MII_DP83640_MISR_ANC_INT_EN |
+ MII_DP83640_MISR_DUP_INT_EN |
+ MII_DP83640_MISR_SPD_INT_EN |
+ MII_DP83640_MISR_LINK_INT_EN);
+ return phy_write(phydev, MII_DP83640_MISR, misr);
+ }
+}
+
+static int dp83640_hwtstamp(struct phy_device *phydev, struct ifreq *ifr)
+{
+ struct dp83640_private *dp83640 = phydev->priv;
+ struct hwtstamp_config cfg;
+ u16 txcfg0, rxcfg0;
+
+ if (copy_from_user(&cfg, ifr->ifr_data, sizeof(cfg)))
+ return -EFAULT;
+
+ if (cfg.flags) /* reserved for future extensions */
+ return -EINVAL;
+
+ if (cfg.tx_type < 0 || cfg.tx_type > HWTSTAMP_TX_ONESTEP_SYNC)
+ return -ERANGE;
+
+ dp83640->hwts_tx_en = cfg.tx_type;
+
+ switch (cfg.rx_filter) {
+ case HWTSTAMP_FILTER_NONE:
+ dp83640->hwts_rx_en = 0;
+ dp83640->layer = 0;
+ dp83640->version = 0;
+ break;
+ case HWTSTAMP_FILTER_PTP_V1_L4_EVENT:
+ case HWTSTAMP_FILTER_PTP_V1_L4_SYNC:
+ case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ:
+ dp83640->hwts_rx_en = 1;
+ dp83640->layer = LAYER4;
+ dp83640->version = 1;
+ break;
+ case HWTSTAMP_FILTER_PTP_V2_L4_EVENT:
+ case HWTSTAMP_FILTER_PTP_V2_L4_SYNC:
+ case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ:
+ dp83640->hwts_rx_en = 1;
+ dp83640->layer = LAYER4;
+ dp83640->version = 2;
+ break;
+ case HWTSTAMP_FILTER_PTP_V2_L2_EVENT:
+ case HWTSTAMP_FILTER_PTP_V2_L2_SYNC:
+ case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ:
+ dp83640->hwts_rx_en = 1;
+ dp83640->layer = LAYER2;
+ dp83640->version = 2;
+ break;
+ case HWTSTAMP_FILTER_PTP_V2_EVENT:
+ case HWTSTAMP_FILTER_PTP_V2_SYNC:
+ case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ:
+ dp83640->hwts_rx_en = 1;
+ dp83640->layer = LAYER4|LAYER2;
+ dp83640->version = 2;
+ break;
+ default:
+ return -ERANGE;
+ }
+
+ txcfg0 = (dp83640->version & TX_PTP_VER_MASK) << TX_PTP_VER_SHIFT;
+ rxcfg0 = (dp83640->version & TX_PTP_VER_MASK) << TX_PTP_VER_SHIFT;
+
+ if (dp83640->layer & LAYER2) {
+ txcfg0 |= TX_L2_EN;
+ rxcfg0 |= RX_L2_EN;
+ }
+ if (dp83640->layer & LAYER4) {
+ txcfg0 |= TX_IPV6_EN | TX_IPV4_EN;
+ rxcfg0 |= RX_IPV6_EN | RX_IPV4_EN;
+ }
+
+ if (dp83640->hwts_tx_en)
+ txcfg0 |= TX_TS_EN;
+
+ if (dp83640->hwts_tx_en == HWTSTAMP_TX_ONESTEP_SYNC)
+ txcfg0 |= SYNC_1STEP | CHK_1STEP;
+
+ if (dp83640->hwts_rx_en)
+ rxcfg0 |= RX_TS_EN;
+
+ mutex_lock(&dp83640->clock->extreg_lock);
+
+ ext_write(0, phydev, PAGE5, PTP_TXCFG0, txcfg0);
+ ext_write(0, phydev, PAGE5, PTP_RXCFG0, rxcfg0);
+
+ mutex_unlock(&dp83640->clock->extreg_lock);
+
+ return copy_to_user(ifr->ifr_data, &cfg, sizeof(cfg)) ? -EFAULT : 0;
+}
+
+static void rx_timestamp_work(struct work_struct *work)
+{
+ struct dp83640_private *dp83640 =
+ container_of(work, struct dp83640_private, ts_work);
+ struct sk_buff *skb;
+
+ /* Deliver expired packets. */
+ while ((skb = skb_dequeue(&dp83640->rx_queue))) {
+ struct dp83640_skb_info *skb_info;
+
+ skb_info = (struct dp83640_skb_info *)skb->cb;
+ if (!time_after(jiffies, skb_info->tmo)) {
+ skb_queue_head(&dp83640->rx_queue, skb);
+ break;
+ }
+
+ netif_rx_ni(skb);
+ }
+
+ if (!skb_queue_empty(&dp83640->rx_queue))
+ schedule_work(&dp83640->ts_work);
+}
+
+static bool dp83640_rxtstamp(struct phy_device *phydev,
+ struct sk_buff *skb, int type)
+{
+ struct dp83640_private *dp83640 = phydev->priv;
+ struct dp83640_skb_info *skb_info = (struct dp83640_skb_info *)skb->cb;
+ struct list_head *this, *next;
+ struct rxts *rxts;
+ struct skb_shared_hwtstamps *shhwtstamps = NULL;
+ unsigned long flags;
+
+ if (is_status_frame(skb, type)) {
+ decode_status_frame(dp83640, skb);
+ kfree_skb(skb);
+ return true;
+ }
+
+ if (!dp83640->hwts_rx_en)
+ return false;
+
+ spin_lock_irqsave(&dp83640->rx_lock, flags);
+ list_for_each_safe(this, next, &dp83640->rxts) {
+ rxts = list_entry(this, struct rxts, list);
+ if (match(skb, type, rxts)) {
+ shhwtstamps = skb_hwtstamps(skb);
+ memset(shhwtstamps, 0, sizeof(*shhwtstamps));
+ shhwtstamps->hwtstamp = ns_to_ktime(rxts->ns);
+ netif_rx_ni(skb);
+ list_del_init(&rxts->list);
+ list_add(&rxts->list, &dp83640->rxpool);
+ break;
+ }
+ }
+ spin_unlock_irqrestore(&dp83640->rx_lock, flags);
+
+ if (!shhwtstamps) {
+ skb_info->ptp_type = type;
+ skb_info->tmo = jiffies + 2;
+ skb_queue_tail(&dp83640->rx_queue, skb);
+ schedule_work(&dp83640->ts_work);
+ }
+
+ return true;
+}
+
+static void dp83640_txtstamp(struct phy_device *phydev,
+ struct sk_buff *skb, int type)
+{
+ struct dp83640_private *dp83640 = phydev->priv;
+
+ switch (dp83640->hwts_tx_en) {
+
+ case HWTSTAMP_TX_ONESTEP_SYNC:
+ if (is_sync(skb, type)) {
+ kfree_skb(skb);
+ return;
+ }
+ /* fall through */
+ case HWTSTAMP_TX_ON:
+ skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
+ skb_queue_tail(&dp83640->tx_queue, skb);
+ break;
+
+ case HWTSTAMP_TX_OFF:
+ default:
+ kfree_skb(skb);
+ break;
+ }
+}
+
+static int dp83640_ts_info(struct phy_device *dev, struct ethtool_ts_info *info)
+{
+ struct dp83640_private *dp83640 = dev->priv;
+
+ info->so_timestamping =
+ SOF_TIMESTAMPING_TX_HARDWARE |
+ SOF_TIMESTAMPING_RX_HARDWARE |
+ SOF_TIMESTAMPING_RAW_HARDWARE;
+ info->phc_index = ptp_clock_index(dp83640->clock->ptp_clock);
+ info->tx_types =
+ (1 << HWTSTAMP_TX_OFF) |
+ (1 << HWTSTAMP_TX_ON) |
+ (1 << HWTSTAMP_TX_ONESTEP_SYNC);
+ info->rx_filters =
+ (1 << HWTSTAMP_FILTER_NONE) |
+ (1 << HWTSTAMP_FILTER_PTP_V1_L4_EVENT) |
+ (1 << HWTSTAMP_FILTER_PTP_V1_L4_SYNC) |
+ (1 << HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ) |
+ (1 << HWTSTAMP_FILTER_PTP_V2_L4_EVENT) |
+ (1 << HWTSTAMP_FILTER_PTP_V2_L4_SYNC) |
+ (1 << HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ) |
+ (1 << HWTSTAMP_FILTER_PTP_V2_L2_EVENT) |
+ (1 << HWTSTAMP_FILTER_PTP_V2_L2_SYNC) |
+ (1 << HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ) |
+ (1 << HWTSTAMP_FILTER_PTP_V2_EVENT) |
+ (1 << HWTSTAMP_FILTER_PTP_V2_SYNC) |
+ (1 << HWTSTAMP_FILTER_PTP_V2_DELAY_REQ);
+ return 0;
+}
+
+static struct phy_driver dp83640_driver = {
+ .phy_id = DP83640_PHY_ID,
+ .phy_id_mask = 0xfffffff0,
+ .name = "NatSemi DP83640",
+ .features = PHY_BASIC_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .probe = dp83640_probe,
+ .remove = dp83640_remove,
+ .config_init = dp83640_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = dp83640_ack_interrupt,
+ .config_intr = dp83640_config_intr,
+ .ts_info = dp83640_ts_info,
+ .hwtstamp = dp83640_hwtstamp,
+ .rxtstamp = dp83640_rxtstamp,
+ .txtstamp = dp83640_txtstamp,
+ .driver = {.owner = THIS_MODULE,}
+};
+
+static int __init dp83640_init(void)
+{
+ return phy_driver_register(&dp83640_driver);
+}
+
+static void __exit dp83640_exit(void)
+{
+ dp83640_free_clocks();
+ phy_driver_unregister(&dp83640_driver);
+}
+
+MODULE_DESCRIPTION("National Semiconductor DP83640 PHY driver");
+MODULE_AUTHOR("Richard Cochran <richardcochran@gmail.com>");
+MODULE_LICENSE("GPL");
+
+module_init(dp83640_init);
+module_exit(dp83640_exit);
+
+static struct mdio_device_id __maybe_unused dp83640_tbl[] = {
+ { DP83640_PHY_ID, 0xfffffff0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(mdio, dp83640_tbl);
diff --git a/kernel/drivers/net/phy/dp83640_reg.h b/kernel/drivers/net/phy/dp83640_reg.h
new file mode 100644
index 000000000..e7fe41117
--- /dev/null
+++ b/kernel/drivers/net/phy/dp83640_reg.h
@@ -0,0 +1,267 @@
+/* dp83640_reg.h
+ * Generated by regen.tcl on Thu Feb 17 10:02:48 AM CET 2011
+ */
+#ifndef HAVE_DP83640_REGISTERS
+#define HAVE_DP83640_REGISTERS
+
+#define PAGE0 0x0000
+#define PHYCR2 0x001c /* PHY Control Register 2 */
+
+#define PAGE4 0x0004
+#define PTP_CTL 0x0014 /* PTP Control Register */
+#define PTP_TDR 0x0015 /* PTP Time Data Register */
+#define PTP_STS 0x0016 /* PTP Status Register */
+#define PTP_TSTS 0x0017 /* PTP Trigger Status Register */
+#define PTP_RATEL 0x0018 /* PTP Rate Low Register */
+#define PTP_RATEH 0x0019 /* PTP Rate High Register */
+#define PTP_RDCKSUM 0x001a /* PTP Read Checksum */
+#define PTP_WRCKSUM 0x001b /* PTP Write Checksum */
+#define PTP_TXTS 0x001c /* PTP Transmit Timestamp Register, in four 16-bit reads */
+#define PTP_RXTS 0x001d /* PTP Receive Timestamp Register, in six? 16-bit reads */
+#define PTP_ESTS 0x001e /* PTP Event Status Register */
+#define PTP_EDATA 0x001f /* PTP Event Data Register */
+
+#define PAGE5 0x0005
+#define PTP_TRIG 0x0014 /* PTP Trigger Configuration Register */
+#define PTP_EVNT 0x0015 /* PTP Event Configuration Register */
+#define PTP_TXCFG0 0x0016 /* PTP Transmit Configuration Register 0 */
+#define PTP_TXCFG1 0x0017 /* PTP Transmit Configuration Register 1 */
+#define PSF_CFG0 0x0018 /* PHY Status Frame Configuration Register 0 */
+#define PTP_RXCFG0 0x0019 /* PTP Receive Configuration Register 0 */
+#define PTP_RXCFG1 0x001a /* PTP Receive Configuration Register 1 */
+#define PTP_RXCFG2 0x001b /* PTP Receive Configuration Register 2 */
+#define PTP_RXCFG3 0x001c /* PTP Receive Configuration Register 3 */
+#define PTP_RXCFG4 0x001d /* PTP Receive Configuration Register 4 */
+#define PTP_TRDL 0x001e /* PTP Temporary Rate Duration Low Register */
+#define PTP_TRDH 0x001f /* PTP Temporary Rate Duration High Register */
+
+#define PAGE6 0x0006
+#define PTP_COC 0x0014 /* PTP Clock Output Control Register */
+#define PSF_CFG1 0x0015 /* PHY Status Frame Configuration Register 1 */
+#define PSF_CFG2 0x0016 /* PHY Status Frame Configuration Register 2 */
+#define PSF_CFG3 0x0017 /* PHY Status Frame Configuration Register 3 */
+#define PSF_CFG4 0x0018 /* PHY Status Frame Configuration Register 4 */
+#define PTP_SFDCFG 0x0019 /* PTP SFD Configuration Register */
+#define PTP_INTCTL 0x001a /* PTP Interrupt Control Register */
+#define PTP_CLKSRC 0x001b /* PTP Clock Source Register */
+#define PTP_ETR 0x001c /* PTP Ethernet Type Register */
+#define PTP_OFF 0x001d /* PTP Offset Register */
+#define PTP_GPIOMON 0x001e /* PTP GPIO Monitor Register */
+#define PTP_RXHASH 0x001f /* PTP Receive Hash Register */
+
+/* Bit definitions for the PHYCR2 register */
+#define BC_WRITE (1<<11) /* Broadcast Write Enable */
+
+/* Bit definitions for the PTP_CTL register */
+#define TRIG_SEL_SHIFT (10) /* PTP Trigger Select */
+#define TRIG_SEL_MASK (0x7)
+#define TRIG_DIS (1<<9) /* Disable PTP Trigger */
+#define TRIG_EN (1<<8) /* Enable PTP Trigger */
+#define TRIG_READ (1<<7) /* Read PTP Trigger */
+#define TRIG_LOAD (1<<6) /* Load PTP Trigger */
+#define PTP_RD_CLK (1<<5) /* Read PTP Clock */
+#define PTP_LOAD_CLK (1<<4) /* Load PTP Clock */
+#define PTP_STEP_CLK (1<<3) /* Step PTP Clock */
+#define PTP_ENABLE (1<<2) /* Enable PTP Clock */
+#define PTP_DISABLE (1<<1) /* Disable PTP Clock */
+#define PTP_RESET (1<<0) /* Reset PTP Clock */
+
+/* Bit definitions for the PTP_STS register */
+#define TXTS_RDY (1<<11) /* Transmit Timestamp Ready */
+#define RXTS_RDY (1<<10) /* Receive Timestamp Ready */
+#define TRIG_DONE (1<<9) /* PTP Trigger Done */
+#define EVENT_RDY (1<<8) /* PTP Event Timestamp Ready */
+#define TXTS_IE (1<<3) /* Transmit Timestamp Interrupt Enable */
+#define RXTS_IE (1<<2) /* Receive Timestamp Interrupt Enable */
+#define TRIG_IE (1<<1) /* Trigger Interrupt Enable */
+#define EVENT_IE (1<<0) /* Event Interrupt Enable */
+
+/* Bit definitions for the PTP_TSTS register */
+#define TRIG7_ERROR (1<<15) /* Trigger 7 Error */
+#define TRIG7_ACTIVE (1<<14) /* Trigger 7 Active */
+#define TRIG6_ERROR (1<<13) /* Trigger 6 Error */
+#define TRIG6_ACTIVE (1<<12) /* Trigger 6 Active */
+#define TRIG5_ERROR (1<<11) /* Trigger 5 Error */
+#define TRIG5_ACTIVE (1<<10) /* Trigger 5 Active */
+#define TRIG4_ERROR (1<<9) /* Trigger 4 Error */
+#define TRIG4_ACTIVE (1<<8) /* Trigger 4 Active */
+#define TRIG3_ERROR (1<<7) /* Trigger 3 Error */
+#define TRIG3_ACTIVE (1<<6) /* Trigger 3 Active */
+#define TRIG2_ERROR (1<<5) /* Trigger 2 Error */
+#define TRIG2_ACTIVE (1<<4) /* Trigger 2 Active */
+#define TRIG1_ERROR (1<<3) /* Trigger 1 Error */
+#define TRIG1_ACTIVE (1<<2) /* Trigger 1 Active */
+#define TRIG0_ERROR (1<<1) /* Trigger 0 Error */
+#define TRIG0_ACTIVE (1<<0) /* Trigger 0 Active */
+
+/* Bit definitions for the PTP_RATEH register */
+#define PTP_RATE_DIR (1<<15) /* PTP Rate Direction */
+#define PTP_TMP_RATE (1<<14) /* PTP Temporary Rate */
+#define PTP_RATE_HI_SHIFT (0) /* PTP Rate High 10-bits */
+#define PTP_RATE_HI_MASK (0x3ff)
+
+/* Bit definitions for the PTP_ESTS register */
+#define EVNTS_MISSED_SHIFT (8) /* Indicates number of events missed */
+#define EVNTS_MISSED_MASK (0x7)
+#define EVNT_TS_LEN_SHIFT (6) /* Indicates length of the Timestamp field in 16-bit words minus 1 */
+#define EVNT_TS_LEN_MASK (0x3)
+#define EVNT_RF (1<<5) /* Indicates whether the event is a rise or falling event */
+#define EVNT_NUM_SHIFT (2) /* Indicates Event Timestamp Unit which detected an event */
+#define EVNT_NUM_MASK (0x7)
+#define MULT_EVNT (1<<1) /* Indicates multiple events were detected at the same time */
+#define EVENT_DET (1<<0) /* PTP Event Detected */
+
+/* Bit definitions for the PTP_EDATA register */
+#define E7_RISE (1<<15) /* Indicates direction of Event 7 */
+#define E7_DET (1<<14) /* Indicates Event 7 detected */
+#define E6_RISE (1<<13) /* Indicates direction of Event 6 */
+#define E6_DET (1<<12) /* Indicates Event 6 detected */
+#define E5_RISE (1<<11) /* Indicates direction of Event 5 */
+#define E5_DET (1<<10) /* Indicates Event 5 detected */
+#define E4_RISE (1<<9) /* Indicates direction of Event 4 */
+#define E4_DET (1<<8) /* Indicates Event 4 detected */
+#define E3_RISE (1<<7) /* Indicates direction of Event 3 */
+#define E3_DET (1<<6) /* Indicates Event 3 detected */
+#define E2_RISE (1<<5) /* Indicates direction of Event 2 */
+#define E2_DET (1<<4) /* Indicates Event 2 detected */
+#define E1_RISE (1<<3) /* Indicates direction of Event 1 */
+#define E1_DET (1<<2) /* Indicates Event 1 detected */
+#define E0_RISE (1<<1) /* Indicates direction of Event 0 */
+#define E0_DET (1<<0) /* Indicates Event 0 detected */
+
+/* Bit definitions for the PTP_TRIG register */
+#define TRIG_PULSE (1<<15) /* generate a Pulse rather than a single edge */
+#define TRIG_PER (1<<14) /* generate a periodic signal */
+#define TRIG_IF_LATE (1<<13) /* trigger immediately if already past */
+#define TRIG_NOTIFY (1<<12) /* Trigger Notification Enable */
+#define TRIG_GPIO_SHIFT (8) /* Trigger GPIO Connection, value 1-12 */
+#define TRIG_GPIO_MASK (0xf)
+#define TRIG_TOGGLE (1<<7) /* Trigger Toggle Mode Enable */
+#define TRIG_CSEL_SHIFT (1) /* Trigger Configuration Select */
+#define TRIG_CSEL_MASK (0x7)
+#define TRIG_WR (1<<0) /* Trigger Configuration Write */
+
+/* Bit definitions for the PTP_EVNT register */
+#define EVNT_RISE (1<<14) /* Event Rise Detect Enable */
+#define EVNT_FALL (1<<13) /* Event Fall Detect Enable */
+#define EVNT_SINGLE (1<<12) /* enable single event capture operation */
+#define EVNT_GPIO_SHIFT (8) /* Event GPIO Connection, value 1-12 */
+#define EVNT_GPIO_MASK (0xf)
+#define EVNT_SEL_SHIFT (1) /* Event Select */
+#define EVNT_SEL_MASK (0x7)
+#define EVNT_WR (1<<0) /* Event Configuration Write */
+
+/* Bit definitions for the PTP_TXCFG0 register */
+#define SYNC_1STEP (1<<15) /* insert timestamp into transmit Sync Messages */
+#define DR_INSERT (1<<13) /* Insert Delay_Req Timestamp in Delay_Resp (dangerous) */
+#define NTP_TS_EN (1<<12) /* Enable Timestamping of NTP Packets */
+#define IGNORE_2STEP (1<<11) /* Ignore Two_Step flag for One-Step operation */
+#define CRC_1STEP (1<<10) /* Disable checking of CRC for One-Step operation */
+#define CHK_1STEP (1<<9) /* Enable UDP Checksum correction for One-Step Operation */
+#define IP1588_EN (1<<8) /* Enable IEEE 1588 defined IP address filter */
+#define TX_L2_EN (1<<7) /* Layer2 Timestamp Enable */
+#define TX_IPV6_EN (1<<6) /* IPv6 Timestamp Enable */
+#define TX_IPV4_EN (1<<5) /* IPv4 Timestamp Enable */
+#define TX_PTP_VER_SHIFT (1) /* Enable Timestamp capture for IEEE 1588 version X */
+#define TX_PTP_VER_MASK (0xf)
+#define TX_TS_EN (1<<0) /* Transmit Timestamp Enable */
+
+/* Bit definitions for the PTP_TXCFG1 register */
+#define BYTE0_MASK_SHIFT (8) /* Bit mask to be used for matching Byte0 of the PTP Message */
+#define BYTE0_MASK_MASK (0xff)
+#define BYTE0_DATA_SHIFT (0) /* Data to be used for matching Byte0 of the PTP Message */
+#define BYTE0_DATA_MASK (0xff)
+
+/* Bit definitions for the PSF_CFG0 register */
+#define MAC_SRC_ADD_SHIFT (11) /* Status Frame Mac Source Address */
+#define MAC_SRC_ADD_MASK (0x3)
+#define MIN_PRE_SHIFT (8) /* Status Frame Minimum Preamble */
+#define MIN_PRE_MASK (0x7)
+#define PSF_ENDIAN (1<<7) /* Status Frame Endian Control */
+#define PSF_IPV4 (1<<6) /* Status Frame IPv4 Enable */
+#define PSF_PCF_RD (1<<5) /* Control Frame Read PHY Status Frame Enable */
+#define PSF_ERR_EN (1<<4) /* Error PHY Status Frame Enable */
+#define PSF_TXTS_EN (1<<3) /* Transmit Timestamp PHY Status Frame Enable */
+#define PSF_RXTS_EN (1<<2) /* Receive Timestamp PHY Status Frame Enable */
+#define PSF_TRIG_EN (1<<1) /* Trigger PHY Status Frame Enable */
+#define PSF_EVNT_EN (1<<0) /* Event PHY Status Frame Enable */
+
+/* Bit definitions for the PTP_RXCFG0 register */
+#define DOMAIN_EN (1<<15) /* Domain Match Enable */
+#define ALT_MAST_DIS (1<<14) /* Alternate Master Timestamp Disable */
+#define USER_IP_SEL (1<<13) /* Selects portion of IP address accessible thru PTP_RXCFG2 */
+#define USER_IP_EN (1<<12) /* Enable User-programmed IP address filter */
+#define RX_SLAVE (1<<11) /* Receive Slave Only */
+#define IP1588_EN_SHIFT (8) /* Enable IEEE 1588 defined IP address filters */
+#define IP1588_EN_MASK (0xf)
+#define RX_L2_EN (1<<7) /* Layer2 Timestamp Enable */
+#define RX_IPV6_EN (1<<6) /* IPv6 Timestamp Enable */
+#define RX_IPV4_EN (1<<5) /* IPv4 Timestamp Enable */
+#define RX_PTP_VER_SHIFT (1) /* Enable Timestamp capture for IEEE 1588 version X */
+#define RX_PTP_VER_MASK (0xf)
+#define RX_TS_EN (1<<0) /* Receive Timestamp Enable */
+
+/* Bit definitions for the PTP_RXCFG1 register */
+#define BYTE0_MASK_SHIFT (8) /* Bit mask to be used for matching Byte0 of the PTP Message */
+#define BYTE0_MASK_MASK (0xff)
+#define BYTE0_DATA_SHIFT (0) /* Data to be used for matching Byte0 of the PTP Message */
+#define BYTE0_DATA_MASK (0xff)
+
+/* Bit definitions for the PTP_RXCFG3 register */
+#define TS_MIN_IFG_SHIFT (12) /* Minimum Inter-frame Gap */
+#define TS_MIN_IFG_MASK (0xf)
+#define ACC_UDP (1<<11) /* Record Timestamp if UDP Checksum Error */
+#define ACC_CRC (1<<10) /* Record Timestamp if CRC Error */
+#define TS_APPEND (1<<9) /* Append Timestamp for L2 */
+#define TS_INSERT (1<<8) /* Enable Timestamp Insertion */
+#define PTP_DOMAIN_SHIFT (0) /* PTP Message domainNumber field */
+#define PTP_DOMAIN_MASK (0xff)
+
+/* Bit definitions for the PTP_RXCFG4 register */
+#define IPV4_UDP_MOD (1<<15) /* Enable IPV4 UDP Modification */
+#define TS_SEC_EN (1<<14) /* Enable Timestamp Seconds */
+#define TS_SEC_LEN_SHIFT (12) /* Inserted Timestamp Seconds Length */
+#define TS_SEC_LEN_MASK (0x3)
+#define RXTS_NS_OFF_SHIFT (6) /* Receive Timestamp Nanoseconds offset */
+#define RXTS_NS_OFF_MASK (0x3f)
+#define RXTS_SEC_OFF_SHIFT (0) /* Receive Timestamp Seconds offset */
+#define RXTS_SEC_OFF_MASK (0x3f)
+
+/* Bit definitions for the PTP_COC register */
+#define PTP_CLKOUT_EN (1<<15) /* PTP Clock Output Enable */
+#define PTP_CLKOUT_SEL (1<<14) /* PTP Clock Output Source Select */
+#define PTP_CLKOUT_SPEEDSEL (1<<13) /* PTP Clock Output I/O Speed Select */
+#define PTP_CLKDIV_SHIFT (0) /* PTP Clock Divide-by Value */
+#define PTP_CLKDIV_MASK (0xff)
+
+/* Bit definitions for the PSF_CFG1 register */
+#define PTPRESERVED_SHIFT (12) /* PTP v2 reserved field */
+#define PTPRESERVED_MASK (0xf)
+#define VERSIONPTP_SHIFT (8) /* PTP v2 versionPTP field */
+#define VERSIONPTP_MASK (0xf)
+#define TRANSPORT_SPECIFIC_SHIFT (4) /* PTP v2 Header transportSpecific field */
+#define TRANSPORT_SPECIFIC_MASK (0xf)
+#define MESSAGETYPE_SHIFT (0) /* PTP v2 messageType field */
+#define MESSAGETYPE_MASK (0xf)
+
+/* Bit definitions for the PTP_SFDCFG register */
+#define TX_SFD_GPIO_SHIFT (4) /* TX SFD GPIO Select, value 1-12 */
+#define TX_SFD_GPIO_MASK (0xf)
+#define RX_SFD_GPIO_SHIFT (0) /* RX SFD GPIO Select, value 1-12 */
+#define RX_SFD_GPIO_MASK (0xf)
+
+/* Bit definitions for the PTP_INTCTL register */
+#define PTP_INT_GPIO_SHIFT (0) /* PTP Interrupt GPIO Select */
+#define PTP_INT_GPIO_MASK (0xf)
+
+/* Bit definitions for the PTP_CLKSRC register */
+#define CLK_SRC_SHIFT (14) /* PTP Clock Source Select */
+#define CLK_SRC_MASK (0x3)
+#define CLK_SRC_PER_SHIFT (0) /* PTP Clock Source Period */
+#define CLK_SRC_PER_MASK (0x7f)
+
+/* Bit definitions for the PTP_OFF register */
+#define PTP_OFFSET_SHIFT (0) /* PTP Message offset from preceding header */
+#define PTP_OFFSET_MASK (0xff)
+
+#endif
diff --git a/kernel/drivers/net/phy/et1011c.c b/kernel/drivers/net/phy/et1011c.c
new file mode 100644
index 000000000..a90774381
--- /dev/null
+++ b/kernel/drivers/net/phy/et1011c.c
@@ -0,0 +1,108 @@
+/*
+ * drivers/net/phy/et1011c.c
+ *
+ * Driver for LSI ET1011C PHYs
+ *
+ * Author: Chaithrika U S
+ *
+ * Copyright (c) 2008 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/unistd.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <asm/irq.h>
+
+#define ET1011C_STATUS_REG (0x1A)
+#define ET1011C_CONFIG_REG (0x16)
+#define ET1011C_SPEED_MASK (0x0300)
+#define ET1011C_GIGABIT_SPEED (0x0200)
+#define ET1011C_TX_FIFO_MASK (0x3000)
+#define ET1011C_TX_FIFO_DEPTH_8 (0x0000)
+#define ET1011C_TX_FIFO_DEPTH_16 (0x1000)
+#define ET1011C_INTERFACE_MASK (0x0007)
+#define ET1011C_GMII_INTERFACE (0x0002)
+#define ET1011C_SYS_CLK_EN (0x01 << 4)
+
+
+MODULE_DESCRIPTION("LSI ET1011C PHY driver");
+MODULE_AUTHOR("Chaithrika U S");
+MODULE_LICENSE("GPL");
+
+static int et1011c_config_aneg(struct phy_device *phydev)
+{
+ int ctl = 0;
+ ctl = phy_read(phydev, MII_BMCR);
+ if (ctl < 0)
+ return ctl;
+ ctl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_SPEED1000 |
+ BMCR_ANENABLE);
+ /* First clear the PHY */
+ phy_write(phydev, MII_BMCR, ctl | BMCR_RESET);
+
+ return genphy_config_aneg(phydev);
+}
+
+static int et1011c_read_status(struct phy_device *phydev)
+{
+ int ret;
+ u32 val;
+ static int speed;
+ ret = genphy_read_status(phydev);
+
+ if (speed != phydev->speed) {
+ speed = phydev->speed;
+ val = phy_read(phydev, ET1011C_STATUS_REG);
+ if ((val & ET1011C_SPEED_MASK) ==
+ ET1011C_GIGABIT_SPEED) {
+ val = phy_read(phydev, ET1011C_CONFIG_REG);
+ val &= ~ET1011C_TX_FIFO_MASK;
+ phy_write(phydev, ET1011C_CONFIG_REG, val\
+ | ET1011C_GMII_INTERFACE\
+ | ET1011C_SYS_CLK_EN\
+ | ET1011C_TX_FIFO_DEPTH_16);
+
+ }
+ }
+ return ret;
+}
+
+static struct phy_driver et1011c_driver[] = { {
+ .phy_id = 0x0282f014,
+ .name = "ET1011C",
+ .phy_id_mask = 0xfffffff0,
+ .features = (PHY_BASIC_FEATURES | SUPPORTED_1000baseT_Full),
+ .flags = PHY_POLL,
+ .config_aneg = et1011c_config_aneg,
+ .read_status = et1011c_read_status,
+ .driver = { .owner = THIS_MODULE,},
+} };
+
+module_phy_driver(et1011c_driver);
+
+static struct mdio_device_id __maybe_unused et1011c_tbl[] = {
+ { 0x0282f014, 0xfffffff0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(mdio, et1011c_tbl);
diff --git a/kernel/drivers/net/phy/fixed_phy.c b/kernel/drivers/net/phy/fixed_phy.c
new file mode 100644
index 000000000..1960b46ad
--- /dev/null
+++ b/kernel/drivers/net/phy/fixed_phy.c
@@ -0,0 +1,366 @@
+/*
+ * Fixed MDIO bus (MDIO bus emulation with fixed PHYs)
+ *
+ * Author: Vitaly Bordug <vbordug@ru.mvista.com>
+ * Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * Copyright (c) 2006-2007 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/list.h>
+#include <linux/mii.h>
+#include <linux/phy.h>
+#include <linux/phy_fixed.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+
+#define MII_REGS_NUM 29
+
+struct fixed_mdio_bus {
+ int irqs[PHY_MAX_ADDR];
+ struct mii_bus *mii_bus;
+ struct list_head phys;
+};
+
+struct fixed_phy {
+ int addr;
+ u16 regs[MII_REGS_NUM];
+ struct phy_device *phydev;
+ struct fixed_phy_status status;
+ int (*link_update)(struct net_device *, struct fixed_phy_status *);
+ struct list_head node;
+};
+
+static struct platform_device *pdev;
+static struct fixed_mdio_bus platform_fmb = {
+ .phys = LIST_HEAD_INIT(platform_fmb.phys),
+};
+
+static int fixed_phy_update_regs(struct fixed_phy *fp)
+{
+ u16 bmsr = BMSR_ANEGCAPABLE;
+ u16 bmcr = 0;
+ u16 lpagb = 0;
+ u16 lpa = 0;
+
+ if (fp->status.duplex) {
+ bmcr |= BMCR_FULLDPLX;
+
+ switch (fp->status.speed) {
+ case 1000:
+ bmsr |= BMSR_ESTATEN;
+ bmcr |= BMCR_SPEED1000;
+ lpagb |= LPA_1000FULL;
+ break;
+ case 100:
+ bmsr |= BMSR_100FULL;
+ bmcr |= BMCR_SPEED100;
+ lpa |= LPA_100FULL;
+ break;
+ case 10:
+ bmsr |= BMSR_10FULL;
+ lpa |= LPA_10FULL;
+ break;
+ default:
+ pr_warn("fixed phy: unknown speed\n");
+ return -EINVAL;
+ }
+ } else {
+ switch (fp->status.speed) {
+ case 1000:
+ bmsr |= BMSR_ESTATEN;
+ bmcr |= BMCR_SPEED1000;
+ lpagb |= LPA_1000HALF;
+ break;
+ case 100:
+ bmsr |= BMSR_100HALF;
+ bmcr |= BMCR_SPEED100;
+ lpa |= LPA_100HALF;
+ break;
+ case 10:
+ bmsr |= BMSR_10HALF;
+ lpa |= LPA_10HALF;
+ break;
+ default:
+ pr_warn("fixed phy: unknown speed\n");
+ return -EINVAL;
+ }
+ }
+
+ if (fp->status.link)
+ bmsr |= BMSR_LSTATUS | BMSR_ANEGCOMPLETE;
+
+ if (fp->status.pause)
+ lpa |= LPA_PAUSE_CAP;
+
+ if (fp->status.asym_pause)
+ lpa |= LPA_PAUSE_ASYM;
+
+ fp->regs[MII_PHYSID1] = 0;
+ fp->regs[MII_PHYSID2] = 0;
+
+ fp->regs[MII_BMSR] = bmsr;
+ fp->regs[MII_BMCR] = bmcr;
+ fp->regs[MII_LPA] = lpa;
+ fp->regs[MII_STAT1000] = lpagb;
+
+ return 0;
+}
+
+static int fixed_mdio_read(struct mii_bus *bus, int phy_addr, int reg_num)
+{
+ struct fixed_mdio_bus *fmb = bus->priv;
+ struct fixed_phy *fp;
+
+ if (reg_num >= MII_REGS_NUM)
+ return -1;
+
+ /* We do not support emulating Clause 45 over Clause 22 register reads
+ * return an error instead of bogus data.
+ */
+ switch (reg_num) {
+ case MII_MMD_CTRL:
+ case MII_MMD_DATA:
+ return -1;
+ default:
+ break;
+ }
+
+ list_for_each_entry(fp, &fmb->phys, node) {
+ if (fp->addr == phy_addr) {
+ /* Issue callback if user registered it. */
+ if (fp->link_update) {
+ fp->link_update(fp->phydev->attached_dev,
+ &fp->status);
+ fixed_phy_update_regs(fp);
+ }
+ return fp->regs[reg_num];
+ }
+ }
+
+ return 0xFFFF;
+}
+
+static int fixed_mdio_write(struct mii_bus *bus, int phy_addr, int reg_num,
+ u16 val)
+{
+ return 0;
+}
+
+/*
+ * If something weird is required to be done with link/speed,
+ * network driver is able to assign a function to implement this.
+ * May be useful for PHY's that need to be software-driven.
+ */
+int fixed_phy_set_link_update(struct phy_device *phydev,
+ int (*link_update)(struct net_device *,
+ struct fixed_phy_status *))
+{
+ struct fixed_mdio_bus *fmb = &platform_fmb;
+ struct fixed_phy *fp;
+
+ if (!phydev || !phydev->bus)
+ return -EINVAL;
+
+ list_for_each_entry(fp, &fmb->phys, node) {
+ if (fp->addr == phydev->addr) {
+ fp->link_update = link_update;
+ fp->phydev = phydev;
+ return 0;
+ }
+ }
+
+ return -ENOENT;
+}
+EXPORT_SYMBOL_GPL(fixed_phy_set_link_update);
+
+int fixed_phy_update_state(struct phy_device *phydev,
+ const struct fixed_phy_status *status,
+ const struct fixed_phy_status *changed)
+{
+ struct fixed_mdio_bus *fmb = &platform_fmb;
+ struct fixed_phy *fp;
+
+ if (!phydev || !phydev->bus)
+ return -EINVAL;
+
+ list_for_each_entry(fp, &fmb->phys, node) {
+ if (fp->addr == phydev->addr) {
+#define _UPD(x) if (changed->x) \
+ fp->status.x = status->x
+ _UPD(link);
+ _UPD(speed);
+ _UPD(duplex);
+ _UPD(pause);
+ _UPD(asym_pause);
+#undef _UPD
+ fixed_phy_update_regs(fp);
+ return 0;
+ }
+ }
+
+ return -ENOENT;
+}
+EXPORT_SYMBOL(fixed_phy_update_state);
+
+int fixed_phy_add(unsigned int irq, int phy_addr,
+ struct fixed_phy_status *status)
+{
+ int ret;
+ struct fixed_mdio_bus *fmb = &platform_fmb;
+ struct fixed_phy *fp;
+
+ fp = kzalloc(sizeof(*fp), GFP_KERNEL);
+ if (!fp)
+ return -ENOMEM;
+
+ memset(fp->regs, 0xFF, sizeof(fp->regs[0]) * MII_REGS_NUM);
+
+ fmb->irqs[phy_addr] = irq;
+
+ fp->addr = phy_addr;
+ fp->status = *status;
+
+ ret = fixed_phy_update_regs(fp);
+ if (ret)
+ goto err_regs;
+
+ list_add_tail(&fp->node, &fmb->phys);
+
+ return 0;
+
+err_regs:
+ kfree(fp);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(fixed_phy_add);
+
+void fixed_phy_del(int phy_addr)
+{
+ struct fixed_mdio_bus *fmb = &platform_fmb;
+ struct fixed_phy *fp, *tmp;
+
+ list_for_each_entry_safe(fp, tmp, &fmb->phys, node) {
+ if (fp->addr == phy_addr) {
+ list_del(&fp->node);
+ kfree(fp);
+ return;
+ }
+ }
+}
+EXPORT_SYMBOL_GPL(fixed_phy_del);
+
+static int phy_fixed_addr;
+static DEFINE_SPINLOCK(phy_fixed_addr_lock);
+
+struct phy_device *fixed_phy_register(unsigned int irq,
+ struct fixed_phy_status *status,
+ struct device_node *np)
+{
+ struct fixed_mdio_bus *fmb = &platform_fmb;
+ struct phy_device *phy;
+ int phy_addr;
+ int ret;
+
+ /* Get the next available PHY address, up to PHY_MAX_ADDR */
+ spin_lock(&phy_fixed_addr_lock);
+ if (phy_fixed_addr == PHY_MAX_ADDR) {
+ spin_unlock(&phy_fixed_addr_lock);
+ return ERR_PTR(-ENOSPC);
+ }
+ phy_addr = phy_fixed_addr++;
+ spin_unlock(&phy_fixed_addr_lock);
+
+ ret = fixed_phy_add(PHY_POLL, phy_addr, status);
+ if (ret < 0)
+ return ERR_PTR(ret);
+
+ phy = get_phy_device(fmb->mii_bus, phy_addr, false);
+ if (!phy || IS_ERR(phy)) {
+ fixed_phy_del(phy_addr);
+ return ERR_PTR(-EINVAL);
+ }
+
+ of_node_get(np);
+ phy->dev.of_node = np;
+
+ ret = phy_device_register(phy);
+ if (ret) {
+ phy_device_free(phy);
+ of_node_put(np);
+ fixed_phy_del(phy_addr);
+ return ERR_PTR(ret);
+ }
+
+ return phy;
+}
+EXPORT_SYMBOL_GPL(fixed_phy_register);
+
+static int __init fixed_mdio_bus_init(void)
+{
+ struct fixed_mdio_bus *fmb = &platform_fmb;
+ int ret;
+
+ pdev = platform_device_register_simple("Fixed MDIO bus", 0, NULL, 0);
+ if (IS_ERR(pdev)) {
+ ret = PTR_ERR(pdev);
+ goto err_pdev;
+ }
+
+ fmb->mii_bus = mdiobus_alloc();
+ if (fmb->mii_bus == NULL) {
+ ret = -ENOMEM;
+ goto err_mdiobus_reg;
+ }
+
+ snprintf(fmb->mii_bus->id, MII_BUS_ID_SIZE, "fixed-0");
+ fmb->mii_bus->name = "Fixed MDIO Bus";
+ fmb->mii_bus->priv = fmb;
+ fmb->mii_bus->parent = &pdev->dev;
+ fmb->mii_bus->read = &fixed_mdio_read;
+ fmb->mii_bus->write = &fixed_mdio_write;
+ fmb->mii_bus->irq = fmb->irqs;
+
+ ret = mdiobus_register(fmb->mii_bus);
+ if (ret)
+ goto err_mdiobus_alloc;
+
+ return 0;
+
+err_mdiobus_alloc:
+ mdiobus_free(fmb->mii_bus);
+err_mdiobus_reg:
+ platform_device_unregister(pdev);
+err_pdev:
+ return ret;
+}
+module_init(fixed_mdio_bus_init);
+
+static void __exit fixed_mdio_bus_exit(void)
+{
+ struct fixed_mdio_bus *fmb = &platform_fmb;
+ struct fixed_phy *fp, *tmp;
+
+ mdiobus_unregister(fmb->mii_bus);
+ mdiobus_free(fmb->mii_bus);
+ platform_device_unregister(pdev);
+
+ list_for_each_entry_safe(fp, tmp, &fmb->phys, node) {
+ list_del(&fp->node);
+ kfree(fp);
+ }
+}
+module_exit(fixed_mdio_bus_exit);
+
+MODULE_DESCRIPTION("Fixed MDIO bus (MDIO bus emulation with fixed PHYs)");
+MODULE_AUTHOR("Vitaly Bordug");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/net/phy/icplus.c b/kernel/drivers/net/phy/icplus.c
new file mode 100644
index 000000000..8644f039d
--- /dev/null
+++ b/kernel/drivers/net/phy/icplus.c
@@ -0,0 +1,265 @@
+/*
+ * Driver for ICPlus PHYs
+ *
+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/unistd.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+MODULE_DESCRIPTION("ICPlus IP175C/IP101A/IP101G/IC1001 PHY drivers");
+MODULE_AUTHOR("Michael Barkowski");
+MODULE_LICENSE("GPL");
+
+/* IP101A/G - IP1001 */
+#define IP10XX_SPEC_CTRL_STATUS 16 /* Spec. Control Register */
+#define IP1001_RXPHASE_SEL (1<<0) /* Add delay on RX_CLK */
+#define IP1001_TXPHASE_SEL (1<<1) /* Add delay on TX_CLK */
+#define IP1001_SPEC_CTRL_STATUS_2 20 /* IP1001 Spec. Control Reg 2 */
+#define IP1001_APS_ON 11 /* IP1001 APS Mode bit */
+#define IP101A_G_APS_ON 2 /* IP101A/G APS Mode bit */
+#define IP101A_G_IRQ_CONF_STATUS 0x11 /* Conf Info IRQ & Status Reg */
+#define IP101A_G_IRQ_PIN_USED (1<<15) /* INTR pin used */
+#define IP101A_G_IRQ_DEFAULT IP101A_G_IRQ_PIN_USED
+
+static int ip175c_config_init(struct phy_device *phydev)
+{
+ int err, i;
+ static int full_reset_performed;
+
+ if (full_reset_performed == 0) {
+
+ /* master reset */
+ err = mdiobus_write(phydev->bus, 30, 0, 0x175c);
+ if (err < 0)
+ return err;
+
+ /* ensure no bus delays overlap reset period */
+ err = mdiobus_read(phydev->bus, 30, 0);
+
+ /* data sheet specifies reset period is 2 msec */
+ mdelay(2);
+
+ /* enable IP175C mode */
+ err = mdiobus_write(phydev->bus, 29, 31, 0x175c);
+ if (err < 0)
+ return err;
+
+ /* Set MII0 speed and duplex (in PHY mode) */
+ err = mdiobus_write(phydev->bus, 29, 22, 0x420);
+ if (err < 0)
+ return err;
+
+ /* reset switch ports */
+ for (i = 0; i < 5; i++) {
+ err = mdiobus_write(phydev->bus, i,
+ MII_BMCR, BMCR_RESET);
+ if (err < 0)
+ return err;
+ }
+
+ for (i = 0; i < 5; i++)
+ err = mdiobus_read(phydev->bus, i, MII_BMCR);
+
+ mdelay(2);
+
+ full_reset_performed = 1;
+ }
+
+ if (phydev->addr != 4) {
+ phydev->state = PHY_RUNNING;
+ phydev->speed = SPEED_100;
+ phydev->duplex = DUPLEX_FULL;
+ phydev->link = 1;
+ netif_carrier_on(phydev->attached_dev);
+ }
+
+ return 0;
+}
+
+static int ip1xx_reset(struct phy_device *phydev)
+{
+ int bmcr;
+
+ /* Software Reset PHY */
+ bmcr = phy_read(phydev, MII_BMCR);
+ if (bmcr < 0)
+ return bmcr;
+ bmcr |= BMCR_RESET;
+ bmcr = phy_write(phydev, MII_BMCR, bmcr);
+ if (bmcr < 0)
+ return bmcr;
+
+ do {
+ bmcr = phy_read(phydev, MII_BMCR);
+ if (bmcr < 0)
+ return bmcr;
+ } while (bmcr & BMCR_RESET);
+
+ return 0;
+}
+
+static int ip1001_config_init(struct phy_device *phydev)
+{
+ int c;
+
+ c = ip1xx_reset(phydev);
+ if (c < 0)
+ return c;
+
+ /* Enable Auto Power Saving mode */
+ c = phy_read(phydev, IP1001_SPEC_CTRL_STATUS_2);
+ if (c < 0)
+ return c;
+ c |= IP1001_APS_ON;
+ c = phy_write(phydev, IP1001_SPEC_CTRL_STATUS_2, c);
+ if (c < 0)
+ return c;
+
+ if ((phydev->interface == PHY_INTERFACE_MODE_RGMII) ||
+ (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) ||
+ (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) ||
+ (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)) {
+
+ c = phy_read(phydev, IP10XX_SPEC_CTRL_STATUS);
+ if (c < 0)
+ return c;
+
+ c &= ~(IP1001_RXPHASE_SEL | IP1001_TXPHASE_SEL);
+
+ if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
+ c |= (IP1001_RXPHASE_SEL | IP1001_TXPHASE_SEL);
+ else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID)
+ c |= IP1001_RXPHASE_SEL;
+ else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
+ c |= IP1001_TXPHASE_SEL;
+
+ c = phy_write(phydev, IP10XX_SPEC_CTRL_STATUS, c);
+ if (c < 0)
+ return c;
+ }
+
+ return 0;
+}
+
+static int ip101a_g_config_init(struct phy_device *phydev)
+{
+ int c;
+
+ c = ip1xx_reset(phydev);
+ if (c < 0)
+ return c;
+
+ /* INTR pin used: speed/link/duplex will cause an interrupt */
+ c = phy_write(phydev, IP101A_G_IRQ_CONF_STATUS, IP101A_G_IRQ_DEFAULT);
+ if (c < 0)
+ return c;
+
+ /* Enable Auto Power Saving mode */
+ c = phy_read(phydev, IP10XX_SPEC_CTRL_STATUS);
+ c |= IP101A_G_APS_ON;
+
+ return phy_write(phydev, IP10XX_SPEC_CTRL_STATUS, c);
+}
+
+static int ip175c_read_status(struct phy_device *phydev)
+{
+ if (phydev->addr == 4) /* WAN port */
+ genphy_read_status(phydev);
+ else
+ /* Don't need to read status for switch ports */
+ phydev->irq = PHY_IGNORE_INTERRUPT;
+
+ return 0;
+}
+
+static int ip175c_config_aneg(struct phy_device *phydev)
+{
+ if (phydev->addr == 4) /* WAN port */
+ genphy_config_aneg(phydev);
+
+ return 0;
+}
+
+static int ip101a_g_ack_interrupt(struct phy_device *phydev)
+{
+ int err = phy_read(phydev, IP101A_G_IRQ_CONF_STATUS);
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+static struct phy_driver icplus_driver[] = {
+{
+ .phy_id = 0x02430d80,
+ .name = "ICPlus IP175C",
+ .phy_id_mask = 0x0ffffff0,
+ .features = PHY_BASIC_FEATURES,
+ .config_init = &ip175c_config_init,
+ .config_aneg = &ip175c_config_aneg,
+ .read_status = &ip175c_read_status,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ .driver = { .owner = THIS_MODULE,},
+}, {
+ .phy_id = 0x02430d90,
+ .name = "ICPlus IP1001",
+ .phy_id_mask = 0x0ffffff0,
+ .features = PHY_GBIT_FEATURES | SUPPORTED_Pause |
+ SUPPORTED_Asym_Pause,
+ .config_init = &ip1001_config_init,
+ .config_aneg = &genphy_config_aneg,
+ .read_status = &genphy_read_status,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ .driver = { .owner = THIS_MODULE,},
+}, {
+ .phy_id = 0x02430c54,
+ .name = "ICPlus IP101A/G",
+ .phy_id_mask = 0x0ffffff0,
+ .features = PHY_BASIC_FEATURES | SUPPORTED_Pause |
+ SUPPORTED_Asym_Pause,
+ .flags = PHY_HAS_INTERRUPT,
+ .ack_interrupt = ip101a_g_ack_interrupt,
+ .config_init = &ip101a_g_config_init,
+ .config_aneg = &genphy_config_aneg,
+ .read_status = &genphy_read_status,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ .driver = { .owner = THIS_MODULE,},
+} };
+
+module_phy_driver(icplus_driver);
+
+static struct mdio_device_id __maybe_unused icplus_tbl[] = {
+ { 0x02430d80, 0x0ffffff0 },
+ { 0x02430d90, 0x0ffffff0 },
+ { 0x02430c54, 0x0ffffff0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(mdio, icplus_tbl);
diff --git a/kernel/drivers/net/phy/lxt.c b/kernel/drivers/net/phy/lxt.c
new file mode 100644
index 000000000..a3a5a7036
--- /dev/null
+++ b/kernel/drivers/net/phy/lxt.c
@@ -0,0 +1,324 @@
+/*
+ * drivers/net/phy/lxt.c
+ *
+ * Driver for Intel LXT PHYs
+ *
+ * Author: Andy Fleming
+ *
+ * Copyright (c) 2004 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/unistd.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+/* The Level one LXT970 is used by many boards */
+
+#define MII_LXT970_IER 17 /* Interrupt Enable Register */
+
+#define MII_LXT970_IER_IEN 0x0002
+
+#define MII_LXT970_ISR 18 /* Interrupt Status Register */
+
+#define MII_LXT970_CONFIG 19 /* Configuration Register */
+
+/* ------------------------------------------------------------------------- */
+/* The Level one LXT971 is used on some of my custom boards */
+
+/* register definitions for the 971 */
+#define MII_LXT971_IER 18 /* Interrupt Enable Register */
+#define MII_LXT971_IER_IEN 0x00f2
+
+#define MII_LXT971_ISR 19 /* Interrupt Status Register */
+
+/* register definitions for the 973 */
+#define MII_LXT973_PCR 16 /* Port Configuration Register */
+#define PCR_FIBER_SELECT 1
+
+MODULE_DESCRIPTION("Intel LXT PHY driver");
+MODULE_AUTHOR("Andy Fleming");
+MODULE_LICENSE("GPL");
+
+static int lxt970_ack_interrupt(struct phy_device *phydev)
+{
+ int err;
+
+ err = phy_read(phydev, MII_BMSR);
+
+ if (err < 0)
+ return err;
+
+ err = phy_read(phydev, MII_LXT970_ISR);
+
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+static int lxt970_config_intr(struct phy_device *phydev)
+{
+ int err;
+
+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+ err = phy_write(phydev, MII_LXT970_IER, MII_LXT970_IER_IEN);
+ else
+ err = phy_write(phydev, MII_LXT970_IER, 0);
+
+ return err;
+}
+
+static int lxt970_config_init(struct phy_device *phydev)
+{
+ int err;
+
+ err = phy_write(phydev, MII_LXT970_CONFIG, 0);
+
+ return err;
+}
+
+
+static int lxt971_ack_interrupt(struct phy_device *phydev)
+{
+ int err = phy_read(phydev, MII_LXT971_ISR);
+
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+static int lxt971_config_intr(struct phy_device *phydev)
+{
+ int err;
+
+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+ err = phy_write(phydev, MII_LXT971_IER, MII_LXT971_IER_IEN);
+ else
+ err = phy_write(phydev, MII_LXT971_IER, 0);
+
+ return err;
+}
+
+/*
+ * A2 version of LXT973 chip has an ERRATA: it randomly return the contents
+ * of the previous even register when you read a odd register regularly
+ */
+
+static int lxt973a2_update_link(struct phy_device *phydev)
+{
+ int status;
+ int control;
+ int retry = 8; /* we try 8 times */
+
+ /* Do a fake read */
+ status = phy_read(phydev, MII_BMSR);
+
+ if (status < 0)
+ return status;
+
+ control = phy_read(phydev, MII_BMCR);
+ if (control < 0)
+ return control;
+
+ do {
+ /* Read link and autonegotiation status */
+ status = phy_read(phydev, MII_BMSR);
+ } while (status >= 0 && retry-- && status == control);
+
+ if (status < 0)
+ return status;
+
+ if ((status & BMSR_LSTATUS) == 0)
+ phydev->link = 0;
+ else
+ phydev->link = 1;
+
+ return 0;
+}
+
+static int lxt973a2_read_status(struct phy_device *phydev)
+{
+ int adv;
+ int err;
+ int lpa;
+ int lpagb = 0;
+
+ /* Update the link, but return if there was an error */
+ err = lxt973a2_update_link(phydev);
+ if (err)
+ return err;
+
+ if (AUTONEG_ENABLE == phydev->autoneg) {
+ int retry = 1;
+
+ adv = phy_read(phydev, MII_ADVERTISE);
+
+ if (adv < 0)
+ return adv;
+
+ do {
+ lpa = phy_read(phydev, MII_LPA);
+
+ if (lpa < 0)
+ return lpa;
+
+ /* If both registers are equal, it is suspect but not
+ * impossible, hence a new try
+ */
+ } while (lpa == adv && retry--);
+
+ lpa &= adv;
+
+ phydev->speed = SPEED_10;
+ phydev->duplex = DUPLEX_HALF;
+ phydev->pause = phydev->asym_pause = 0;
+
+ if (lpagb & (LPA_1000FULL | LPA_1000HALF)) {
+ phydev->speed = SPEED_1000;
+
+ if (lpagb & LPA_1000FULL)
+ phydev->duplex = DUPLEX_FULL;
+ } else if (lpa & (LPA_100FULL | LPA_100HALF)) {
+ phydev->speed = SPEED_100;
+
+ if (lpa & LPA_100FULL)
+ phydev->duplex = DUPLEX_FULL;
+ } else {
+ if (lpa & LPA_10FULL)
+ phydev->duplex = DUPLEX_FULL;
+ }
+
+ if (phydev->duplex == DUPLEX_FULL) {
+ phydev->pause = lpa & LPA_PAUSE_CAP ? 1 : 0;
+ phydev->asym_pause = lpa & LPA_PAUSE_ASYM ? 1 : 0;
+ }
+ } else {
+ int bmcr = phy_read(phydev, MII_BMCR);
+
+ if (bmcr < 0)
+ return bmcr;
+
+ if (bmcr & BMCR_FULLDPLX)
+ phydev->duplex = DUPLEX_FULL;
+ else
+ phydev->duplex = DUPLEX_HALF;
+
+ if (bmcr & BMCR_SPEED1000)
+ phydev->speed = SPEED_1000;
+ else if (bmcr & BMCR_SPEED100)
+ phydev->speed = SPEED_100;
+ else
+ phydev->speed = SPEED_10;
+
+ phydev->pause = phydev->asym_pause = 0;
+ }
+
+ return 0;
+}
+
+static int lxt973_probe(struct phy_device *phydev)
+{
+ int val = phy_read(phydev, MII_LXT973_PCR);
+
+ if (val & PCR_FIBER_SELECT) {
+ /*
+ * If fiber is selected, then the only correct setting
+ * is 100Mbps, full duplex, and auto negotiation off.
+ */
+ val = phy_read(phydev, MII_BMCR);
+ val |= (BMCR_SPEED100 | BMCR_FULLDPLX);
+ val &= ~BMCR_ANENABLE;
+ phy_write(phydev, MII_BMCR, val);
+ /* Remember that the port is in fiber mode. */
+ phydev->priv = lxt973_probe;
+ } else {
+ phydev->priv = NULL;
+ }
+ return 0;
+}
+
+static int lxt973_config_aneg(struct phy_device *phydev)
+{
+ /* Do nothing if port is in fiber mode. */
+ return phydev->priv ? 0 : genphy_config_aneg(phydev);
+}
+
+static struct phy_driver lxt97x_driver[] = {
+{
+ .phy_id = 0x78100000,
+ .name = "LXT970",
+ .phy_id_mask = 0xfffffff0,
+ .features = PHY_BASIC_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = lxt970_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = lxt970_ack_interrupt,
+ .config_intr = lxt970_config_intr,
+ .driver = { .owner = THIS_MODULE,},
+}, {
+ .phy_id = 0x001378e0,
+ .name = "LXT971",
+ .phy_id_mask = 0xfffffff0,
+ .features = PHY_BASIC_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = lxt971_ack_interrupt,
+ .config_intr = lxt971_config_intr,
+ .driver = { .owner = THIS_MODULE,},
+}, {
+ .phy_id = 0x00137a10,
+ .name = "LXT973-A2",
+ .phy_id_mask = 0xffffffff,
+ .features = PHY_BASIC_FEATURES,
+ .flags = 0,
+ .probe = lxt973_probe,
+ .config_aneg = lxt973_config_aneg,
+ .read_status = lxt973a2_read_status,
+ .driver = { .owner = THIS_MODULE,},
+}, {
+ .phy_id = 0x00137a10,
+ .name = "LXT973",
+ .phy_id_mask = 0xfffffff0,
+ .features = PHY_BASIC_FEATURES,
+ .flags = 0,
+ .probe = lxt973_probe,
+ .config_aneg = lxt973_config_aneg,
+ .read_status = genphy_read_status,
+ .driver = { .owner = THIS_MODULE,},
+} };
+
+module_phy_driver(lxt97x_driver);
+
+static struct mdio_device_id __maybe_unused lxt_tbl[] = {
+ { 0x78100000, 0xfffffff0 },
+ { 0x001378e0, 0xfffffff0 },
+ { 0x00137a10, 0xfffffff0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(mdio, lxt_tbl);
diff --git a/kernel/drivers/net/phy/marvell.c b/kernel/drivers/net/phy/marvell.c
new file mode 100644
index 000000000..1b1698f98
--- /dev/null
+++ b/kernel/drivers/net/phy/marvell.c
@@ -0,0 +1,1141 @@
+/*
+ * drivers/net/phy/marvell.c
+ *
+ * Driver for Marvell PHYs
+ *
+ * Author: Andy Fleming
+ *
+ * Copyright (c) 2004 Freescale Semiconductor, Inc.
+ *
+ * Copyright (c) 2013 Michael Stapelberg <michael@stapelberg.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/unistd.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+#include <linux/marvell_phy.h>
+#include <linux/of.h>
+
+#include <linux/io.h>
+#include <asm/irq.h>
+#include <linux/uaccess.h>
+
+#define MII_MARVELL_PHY_PAGE 22
+
+#define MII_M1011_IEVENT 0x13
+#define MII_M1011_IEVENT_CLEAR 0x0000
+
+#define MII_M1011_IMASK 0x12
+#define MII_M1011_IMASK_INIT 0x6400
+#define MII_M1011_IMASK_CLEAR 0x0000
+
+#define MII_M1011_PHY_SCR 0x10
+#define MII_M1011_PHY_SCR_AUTO_CROSS 0x0060
+
+#define MII_M1145_PHY_EXT_SR 0x1b
+#define MII_M1145_PHY_EXT_CR 0x14
+#define MII_M1145_RGMII_RX_DELAY 0x0080
+#define MII_M1145_RGMII_TX_DELAY 0x0002
+#define MII_M1145_HWCFG_MODE_SGMII_NO_CLK 0x4
+#define MII_M1145_HWCFG_MODE_MASK 0xf
+#define MII_M1145_HWCFG_FIBER_COPPER_AUTO 0x8000
+
+#define MII_M1145_HWCFG_MODE_SGMII_NO_CLK 0x4
+#define MII_M1145_HWCFG_MODE_MASK 0xf
+#define MII_M1145_HWCFG_FIBER_COPPER_AUTO 0x8000
+
+#define MII_M1111_PHY_LED_CONTROL 0x18
+#define MII_M1111_PHY_LED_DIRECT 0x4100
+#define MII_M1111_PHY_LED_COMBINE 0x411c
+#define MII_M1111_PHY_EXT_CR 0x14
+#define MII_M1111_RX_DELAY 0x80
+#define MII_M1111_TX_DELAY 0x2
+#define MII_M1111_PHY_EXT_SR 0x1b
+
+#define MII_M1111_HWCFG_MODE_MASK 0xf
+#define MII_M1111_HWCFG_MODE_COPPER_RGMII 0xb
+#define MII_M1111_HWCFG_MODE_FIBER_RGMII 0x3
+#define MII_M1111_HWCFG_MODE_SGMII_NO_CLK 0x4
+#define MII_M1111_HWCFG_MODE_COPPER_RTBI 0x9
+#define MII_M1111_HWCFG_FIBER_COPPER_AUTO 0x8000
+#define MII_M1111_HWCFG_FIBER_COPPER_RES 0x2000
+
+#define MII_M1111_COPPER 0
+#define MII_M1111_FIBER 1
+
+#define MII_88E1121_PHY_MSCR_PAGE 2
+#define MII_88E1121_PHY_MSCR_REG 21
+#define MII_88E1121_PHY_MSCR_RX_DELAY BIT(5)
+#define MII_88E1121_PHY_MSCR_TX_DELAY BIT(4)
+#define MII_88E1121_PHY_MSCR_DELAY_MASK (~(0x3 << 4))
+
+#define MII_88E1318S_PHY_MSCR1_REG 16
+#define MII_88E1318S_PHY_MSCR1_PAD_ODD BIT(6)
+
+/* Copper Specific Interrupt Enable Register */
+#define MII_88E1318S_PHY_CSIER 0x12
+/* WOL Event Interrupt Enable */
+#define MII_88E1318S_PHY_CSIER_WOL_EIE BIT(7)
+
+/* LED Timer Control Register */
+#define MII_88E1318S_PHY_LED_PAGE 0x03
+#define MII_88E1318S_PHY_LED_TCR 0x12
+#define MII_88E1318S_PHY_LED_TCR_FORCE_INT BIT(15)
+#define MII_88E1318S_PHY_LED_TCR_INTn_ENABLE BIT(7)
+#define MII_88E1318S_PHY_LED_TCR_INT_ACTIVE_LOW BIT(11)
+
+/* Magic Packet MAC address registers */
+#define MII_88E1318S_PHY_MAGIC_PACKET_WORD2 0x17
+#define MII_88E1318S_PHY_MAGIC_PACKET_WORD1 0x18
+#define MII_88E1318S_PHY_MAGIC_PACKET_WORD0 0x19
+
+#define MII_88E1318S_PHY_WOL_PAGE 0x11
+#define MII_88E1318S_PHY_WOL_CTRL 0x10
+#define MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS BIT(12)
+#define MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE BIT(14)
+
+#define MII_88E1121_PHY_LED_CTRL 16
+#define MII_88E1121_PHY_LED_PAGE 3
+#define MII_88E1121_PHY_LED_DEF 0x0030
+
+#define MII_M1011_PHY_STATUS 0x11
+#define MII_M1011_PHY_STATUS_1000 0x8000
+#define MII_M1011_PHY_STATUS_100 0x4000
+#define MII_M1011_PHY_STATUS_SPD_MASK 0xc000
+#define MII_M1011_PHY_STATUS_FULLDUPLEX 0x2000
+#define MII_M1011_PHY_STATUS_RESOLVED 0x0800
+#define MII_M1011_PHY_STATUS_LINK 0x0400
+
+#define MII_M1116R_CONTROL_REG_MAC 21
+
+#define MII_88E3016_PHY_SPEC_CTRL 0x10
+#define MII_88E3016_DISABLE_SCRAMBLER 0x0200
+#define MII_88E3016_AUTO_MDIX_CROSSOVER 0x0030
+
+MODULE_DESCRIPTION("Marvell PHY driver");
+MODULE_AUTHOR("Andy Fleming");
+MODULE_LICENSE("GPL");
+
+static int marvell_ack_interrupt(struct phy_device *phydev)
+{
+ int err;
+
+ /* Clear the interrupts by reading the reg */
+ err = phy_read(phydev, MII_M1011_IEVENT);
+
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+static int marvell_config_intr(struct phy_device *phydev)
+{
+ int err;
+
+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+ err = phy_write(phydev, MII_M1011_IMASK, MII_M1011_IMASK_INIT);
+ else
+ err = phy_write(phydev, MII_M1011_IMASK, MII_M1011_IMASK_CLEAR);
+
+ return err;
+}
+
+static int marvell_config_aneg(struct phy_device *phydev)
+{
+ int err;
+
+ /* The Marvell PHY has an errata which requires
+ * that certain registers get written in order
+ * to restart autonegotiation */
+ err = phy_write(phydev, MII_BMCR, BMCR_RESET);
+
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, 0x1d, 0x1f);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, 0x1e, 0x200c);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, 0x1d, 0x5);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, 0x1e, 0);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, 0x1e, 0x100);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, MII_M1011_PHY_SCR,
+ MII_M1011_PHY_SCR_AUTO_CROSS);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, MII_M1111_PHY_LED_CONTROL,
+ MII_M1111_PHY_LED_DIRECT);
+ if (err < 0)
+ return err;
+
+ err = genphy_config_aneg(phydev);
+ if (err < 0)
+ return err;
+
+ if (phydev->autoneg != AUTONEG_ENABLE) {
+ int bmcr;
+
+ /*
+ * A write to speed/duplex bits (that is performed by
+ * genphy_config_aneg() call above) must be followed by
+ * a software reset. Otherwise, the write has no effect.
+ */
+ bmcr = phy_read(phydev, MII_BMCR);
+ if (bmcr < 0)
+ return bmcr;
+
+ err = phy_write(phydev, MII_BMCR, bmcr | BMCR_RESET);
+ if (err < 0)
+ return err;
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_OF_MDIO
+/*
+ * Set and/or override some configuration registers based on the
+ * marvell,reg-init property stored in the of_node for the phydev.
+ *
+ * marvell,reg-init = <reg-page reg mask value>,...;
+ *
+ * There may be one or more sets of <reg-page reg mask value>:
+ *
+ * reg-page: which register bank to use.
+ * reg: the register.
+ * mask: if non-zero, ANDed with existing register value.
+ * value: ORed with the masked value and written to the regiser.
+ *
+ */
+static int marvell_of_reg_init(struct phy_device *phydev)
+{
+ const __be32 *paddr;
+ int len, i, saved_page, current_page, page_changed, ret;
+
+ if (!phydev->dev.of_node)
+ return 0;
+
+ paddr = of_get_property(phydev->dev.of_node, "marvell,reg-init", &len);
+ if (!paddr || len < (4 * sizeof(*paddr)))
+ return 0;
+
+ saved_page = phy_read(phydev, MII_MARVELL_PHY_PAGE);
+ if (saved_page < 0)
+ return saved_page;
+ page_changed = 0;
+ current_page = saved_page;
+
+ ret = 0;
+ len /= sizeof(*paddr);
+ for (i = 0; i < len - 3; i += 4) {
+ u16 reg_page = be32_to_cpup(paddr + i);
+ u16 reg = be32_to_cpup(paddr + i + 1);
+ u16 mask = be32_to_cpup(paddr + i + 2);
+ u16 val_bits = be32_to_cpup(paddr + i + 3);
+ int val;
+
+ if (reg_page != current_page) {
+ current_page = reg_page;
+ page_changed = 1;
+ ret = phy_write(phydev, MII_MARVELL_PHY_PAGE, reg_page);
+ if (ret < 0)
+ goto err;
+ }
+
+ val = 0;
+ if (mask) {
+ val = phy_read(phydev, reg);
+ if (val < 0) {
+ ret = val;
+ goto err;
+ }
+ val &= mask;
+ }
+ val |= val_bits;
+
+ ret = phy_write(phydev, reg, val);
+ if (ret < 0)
+ goto err;
+
+ }
+err:
+ if (page_changed) {
+ i = phy_write(phydev, MII_MARVELL_PHY_PAGE, saved_page);
+ if (ret == 0)
+ ret = i;
+ }
+ return ret;
+}
+#else
+static int marvell_of_reg_init(struct phy_device *phydev)
+{
+ return 0;
+}
+#endif /* CONFIG_OF_MDIO */
+
+static int m88e1121_config_aneg(struct phy_device *phydev)
+{
+ int err, oldpage, mscr;
+
+ oldpage = phy_read(phydev, MII_MARVELL_PHY_PAGE);
+
+ err = phy_write(phydev, MII_MARVELL_PHY_PAGE,
+ MII_88E1121_PHY_MSCR_PAGE);
+ if (err < 0)
+ return err;
+
+ if ((phydev->interface == PHY_INTERFACE_MODE_RGMII) ||
+ (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) ||
+ (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) ||
+ (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)) {
+
+ mscr = phy_read(phydev, MII_88E1121_PHY_MSCR_REG) &
+ MII_88E1121_PHY_MSCR_DELAY_MASK;
+
+ if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
+ mscr |= (MII_88E1121_PHY_MSCR_RX_DELAY |
+ MII_88E1121_PHY_MSCR_TX_DELAY);
+ else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID)
+ mscr |= MII_88E1121_PHY_MSCR_RX_DELAY;
+ else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
+ mscr |= MII_88E1121_PHY_MSCR_TX_DELAY;
+
+ err = phy_write(phydev, MII_88E1121_PHY_MSCR_REG, mscr);
+ if (err < 0)
+ return err;
+ }
+
+ phy_write(phydev, MII_MARVELL_PHY_PAGE, oldpage);
+
+ err = phy_write(phydev, MII_BMCR, BMCR_RESET);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, MII_M1011_PHY_SCR,
+ MII_M1011_PHY_SCR_AUTO_CROSS);
+ if (err < 0)
+ return err;
+
+ oldpage = phy_read(phydev, MII_MARVELL_PHY_PAGE);
+
+ phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_88E1121_PHY_LED_PAGE);
+ phy_write(phydev, MII_88E1121_PHY_LED_CTRL, MII_88E1121_PHY_LED_DEF);
+ phy_write(phydev, MII_MARVELL_PHY_PAGE, oldpage);
+
+ err = genphy_config_aneg(phydev);
+
+ return err;
+}
+
+static int m88e1318_config_aneg(struct phy_device *phydev)
+{
+ int err, oldpage, mscr;
+
+ oldpage = phy_read(phydev, MII_MARVELL_PHY_PAGE);
+
+ err = phy_write(phydev, MII_MARVELL_PHY_PAGE,
+ MII_88E1121_PHY_MSCR_PAGE);
+ if (err < 0)
+ return err;
+
+ mscr = phy_read(phydev, MII_88E1318S_PHY_MSCR1_REG);
+ mscr |= MII_88E1318S_PHY_MSCR1_PAD_ODD;
+
+ err = phy_write(phydev, MII_88E1318S_PHY_MSCR1_REG, mscr);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, MII_MARVELL_PHY_PAGE, oldpage);
+ if (err < 0)
+ return err;
+
+ return m88e1121_config_aneg(phydev);
+}
+
+static int m88e1510_config_aneg(struct phy_device *phydev)
+{
+ int err;
+
+ err = m88e1318_config_aneg(phydev);
+ if (err < 0)
+ return err;
+
+ return marvell_of_reg_init(phydev);
+}
+
+static int m88e1116r_config_init(struct phy_device *phydev)
+{
+ int temp;
+ int err;
+
+ temp = phy_read(phydev, MII_BMCR);
+ temp |= BMCR_RESET;
+ err = phy_write(phydev, MII_BMCR, temp);
+ if (err < 0)
+ return err;
+
+ mdelay(500);
+
+ err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0);
+ if (err < 0)
+ return err;
+
+ temp = phy_read(phydev, MII_M1011_PHY_SCR);
+ temp |= (7 << 12); /* max number of gigabit attempts */
+ temp |= (1 << 11); /* enable downshift */
+ temp |= MII_M1011_PHY_SCR_AUTO_CROSS;
+ err = phy_write(phydev, MII_M1011_PHY_SCR, temp);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 2);
+ if (err < 0)
+ return err;
+ temp = phy_read(phydev, MII_M1116R_CONTROL_REG_MAC);
+ temp |= (1 << 5);
+ temp |= (1 << 4);
+ err = phy_write(phydev, MII_M1116R_CONTROL_REG_MAC, temp);
+ if (err < 0)
+ return err;
+ err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0);
+ if (err < 0)
+ return err;
+
+ temp = phy_read(phydev, MII_BMCR);
+ temp |= BMCR_RESET;
+ err = phy_write(phydev, MII_BMCR, temp);
+ if (err < 0)
+ return err;
+
+ mdelay(500);
+
+ return 0;
+}
+
+static int m88e3016_config_init(struct phy_device *phydev)
+{
+ int reg;
+
+ /* Enable Scrambler and Auto-Crossover */
+ reg = phy_read(phydev, MII_88E3016_PHY_SPEC_CTRL);
+ if (reg < 0)
+ return reg;
+
+ reg &= ~MII_88E3016_DISABLE_SCRAMBLER;
+ reg |= MII_88E3016_AUTO_MDIX_CROSSOVER;
+
+ reg = phy_write(phydev, MII_88E3016_PHY_SPEC_CTRL, reg);
+ if (reg < 0)
+ return reg;
+
+ return 0;
+}
+
+static int m88e1111_config_init(struct phy_device *phydev)
+{
+ int err;
+ int temp;
+
+ if ((phydev->interface == PHY_INTERFACE_MODE_RGMII) ||
+ (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) ||
+ (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) ||
+ (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)) {
+
+ temp = phy_read(phydev, MII_M1111_PHY_EXT_CR);
+ if (temp < 0)
+ return temp;
+
+ if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) {
+ temp |= (MII_M1111_RX_DELAY | MII_M1111_TX_DELAY);
+ } else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) {
+ temp &= ~MII_M1111_TX_DELAY;
+ temp |= MII_M1111_RX_DELAY;
+ } else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) {
+ temp &= ~MII_M1111_RX_DELAY;
+ temp |= MII_M1111_TX_DELAY;
+ }
+
+ err = phy_write(phydev, MII_M1111_PHY_EXT_CR, temp);
+ if (err < 0)
+ return err;
+
+ temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
+ if (temp < 0)
+ return temp;
+
+ temp &= ~(MII_M1111_HWCFG_MODE_MASK);
+
+ if (temp & MII_M1111_HWCFG_FIBER_COPPER_RES)
+ temp |= MII_M1111_HWCFG_MODE_FIBER_RGMII;
+ else
+ temp |= MII_M1111_HWCFG_MODE_COPPER_RGMII;
+
+ err = phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);
+ if (err < 0)
+ return err;
+ }
+
+ if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
+ temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
+ if (temp < 0)
+ return temp;
+
+ temp &= ~(MII_M1111_HWCFG_MODE_MASK);
+ temp |= MII_M1111_HWCFG_MODE_SGMII_NO_CLK;
+ temp |= MII_M1111_HWCFG_FIBER_COPPER_AUTO;
+
+ err = phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);
+ if (err < 0)
+ return err;
+ }
+
+ if (phydev->interface == PHY_INTERFACE_MODE_RTBI) {
+ temp = phy_read(phydev, MII_M1111_PHY_EXT_CR);
+ if (temp < 0)
+ return temp;
+ temp |= (MII_M1111_RX_DELAY | MII_M1111_TX_DELAY);
+ err = phy_write(phydev, MII_M1111_PHY_EXT_CR, temp);
+ if (err < 0)
+ return err;
+
+ temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
+ if (temp < 0)
+ return temp;
+ temp &= ~(MII_M1111_HWCFG_MODE_MASK | MII_M1111_HWCFG_FIBER_COPPER_RES);
+ temp |= 0x7 | MII_M1111_HWCFG_FIBER_COPPER_AUTO;
+ err = phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);
+ if (err < 0)
+ return err;
+
+ /* soft reset */
+ err = phy_write(phydev, MII_BMCR, BMCR_RESET);
+ if (err < 0)
+ return err;
+ do
+ temp = phy_read(phydev, MII_BMCR);
+ while (temp & BMCR_RESET);
+
+ temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
+ if (temp < 0)
+ return temp;
+ temp &= ~(MII_M1111_HWCFG_MODE_MASK | MII_M1111_HWCFG_FIBER_COPPER_RES);
+ temp |= MII_M1111_HWCFG_MODE_COPPER_RTBI | MII_M1111_HWCFG_FIBER_COPPER_AUTO;
+ err = phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);
+ if (err < 0)
+ return err;
+ }
+
+ err = marvell_of_reg_init(phydev);
+ if (err < 0)
+ return err;
+
+ return phy_write(phydev, MII_BMCR, BMCR_RESET);
+}
+
+static int m88e1118_config_aneg(struct phy_device *phydev)
+{
+ int err;
+
+ err = phy_write(phydev, MII_BMCR, BMCR_RESET);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, MII_M1011_PHY_SCR,
+ MII_M1011_PHY_SCR_AUTO_CROSS);
+ if (err < 0)
+ return err;
+
+ err = genphy_config_aneg(phydev);
+ return 0;
+}
+
+static int m88e1118_config_init(struct phy_device *phydev)
+{
+ int err;
+
+ /* Change address */
+ err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0002);
+ if (err < 0)
+ return err;
+
+ /* Enable 1000 Mbit */
+ err = phy_write(phydev, 0x15, 0x1070);
+ if (err < 0)
+ return err;
+
+ /* Change address */
+ err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0003);
+ if (err < 0)
+ return err;
+
+ /* Adjust LED Control */
+ if (phydev->dev_flags & MARVELL_PHY_M1118_DNS323_LEDS)
+ err = phy_write(phydev, 0x10, 0x1100);
+ else
+ err = phy_write(phydev, 0x10, 0x021e);
+ if (err < 0)
+ return err;
+
+ err = marvell_of_reg_init(phydev);
+ if (err < 0)
+ return err;
+
+ /* Reset address */
+ err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0);
+ if (err < 0)
+ return err;
+
+ return phy_write(phydev, MII_BMCR, BMCR_RESET);
+}
+
+static int m88e1149_config_init(struct phy_device *phydev)
+{
+ int err;
+
+ /* Change address */
+ err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0002);
+ if (err < 0)
+ return err;
+
+ /* Enable 1000 Mbit */
+ err = phy_write(phydev, 0x15, 0x1048);
+ if (err < 0)
+ return err;
+
+ err = marvell_of_reg_init(phydev);
+ if (err < 0)
+ return err;
+
+ /* Reset address */
+ err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0);
+ if (err < 0)
+ return err;
+
+ return phy_write(phydev, MII_BMCR, BMCR_RESET);
+}
+
+static int m88e1145_config_init(struct phy_device *phydev)
+{
+ int err;
+ int temp;
+
+ /* Take care of errata E0 & E1 */
+ err = phy_write(phydev, 0x1d, 0x001b);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, 0x1e, 0x418f);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, 0x1d, 0x0016);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, 0x1e, 0xa2da);
+ if (err < 0)
+ return err;
+
+ if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) {
+ int temp = phy_read(phydev, MII_M1145_PHY_EXT_CR);
+ if (temp < 0)
+ return temp;
+
+ temp |= (MII_M1145_RGMII_RX_DELAY | MII_M1145_RGMII_TX_DELAY);
+
+ err = phy_write(phydev, MII_M1145_PHY_EXT_CR, temp);
+ if (err < 0)
+ return err;
+
+ if (phydev->dev_flags & MARVELL_PHY_M1145_FLAGS_RESISTANCE) {
+ err = phy_write(phydev, 0x1d, 0x0012);
+ if (err < 0)
+ return err;
+
+ temp = phy_read(phydev, 0x1e);
+ if (temp < 0)
+ return temp;
+
+ temp &= 0xf03f;
+ temp |= 2 << 9; /* 36 ohm */
+ temp |= 2 << 6; /* 39 ohm */
+
+ err = phy_write(phydev, 0x1e, temp);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, 0x1d, 0x3);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, 0x1e, 0x8000);
+ if (err < 0)
+ return err;
+ }
+ }
+
+ if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
+ temp = phy_read(phydev, MII_M1145_PHY_EXT_SR);
+ if (temp < 0)
+ return temp;
+
+ temp &= ~MII_M1145_HWCFG_MODE_MASK;
+ temp |= MII_M1145_HWCFG_MODE_SGMII_NO_CLK;
+ temp |= MII_M1145_HWCFG_FIBER_COPPER_AUTO;
+
+ err = phy_write(phydev, MII_M1145_PHY_EXT_SR, temp);
+ if (err < 0)
+ return err;
+ }
+
+ err = marvell_of_reg_init(phydev);
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+/* marvell_read_status
+ *
+ * Generic status code does not detect Fiber correctly!
+ * Description:
+ * Check the link, then figure out the current state
+ * by comparing what we advertise with what the link partner
+ * advertises. Start by checking the gigabit possibilities,
+ * then move on to 10/100.
+ */
+static int marvell_read_status(struct phy_device *phydev)
+{
+ int adv;
+ int err;
+ int lpa;
+ int status = 0;
+
+ /* Update the link, but return if there
+ * was an error */
+ err = genphy_update_link(phydev);
+ if (err)
+ return err;
+
+ if (AUTONEG_ENABLE == phydev->autoneg) {
+ status = phy_read(phydev, MII_M1011_PHY_STATUS);
+ if (status < 0)
+ return status;
+
+ lpa = phy_read(phydev, MII_LPA);
+ if (lpa < 0)
+ return lpa;
+
+ adv = phy_read(phydev, MII_ADVERTISE);
+ if (adv < 0)
+ return adv;
+
+ lpa &= adv;
+
+ if (status & MII_M1011_PHY_STATUS_FULLDUPLEX)
+ phydev->duplex = DUPLEX_FULL;
+ else
+ phydev->duplex = DUPLEX_HALF;
+
+ status = status & MII_M1011_PHY_STATUS_SPD_MASK;
+ phydev->pause = phydev->asym_pause = 0;
+
+ switch (status) {
+ case MII_M1011_PHY_STATUS_1000:
+ phydev->speed = SPEED_1000;
+ break;
+
+ case MII_M1011_PHY_STATUS_100:
+ phydev->speed = SPEED_100;
+ break;
+
+ default:
+ phydev->speed = SPEED_10;
+ break;
+ }
+
+ if (phydev->duplex == DUPLEX_FULL) {
+ phydev->pause = lpa & LPA_PAUSE_CAP ? 1 : 0;
+ phydev->asym_pause = lpa & LPA_PAUSE_ASYM ? 1 : 0;
+ }
+ } else {
+ int bmcr = phy_read(phydev, MII_BMCR);
+
+ if (bmcr < 0)
+ return bmcr;
+
+ if (bmcr & BMCR_FULLDPLX)
+ phydev->duplex = DUPLEX_FULL;
+ else
+ phydev->duplex = DUPLEX_HALF;
+
+ if (bmcr & BMCR_SPEED1000)
+ phydev->speed = SPEED_1000;
+ else if (bmcr & BMCR_SPEED100)
+ phydev->speed = SPEED_100;
+ else
+ phydev->speed = SPEED_10;
+
+ phydev->pause = phydev->asym_pause = 0;
+ }
+
+ return 0;
+}
+
+static int marvell_aneg_done(struct phy_device *phydev)
+{
+ int retval = phy_read(phydev, MII_M1011_PHY_STATUS);
+ return (retval < 0) ? retval : (retval & MII_M1011_PHY_STATUS_RESOLVED);
+}
+
+static int m88e1121_did_interrupt(struct phy_device *phydev)
+{
+ int imask;
+
+ imask = phy_read(phydev, MII_M1011_IEVENT);
+
+ if (imask & MII_M1011_IMASK_INIT)
+ return 1;
+
+ return 0;
+}
+
+static void m88e1318_get_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol)
+{
+ wol->supported = WAKE_MAGIC;
+ wol->wolopts = 0;
+
+ if (phy_write(phydev, MII_MARVELL_PHY_PAGE,
+ MII_88E1318S_PHY_WOL_PAGE) < 0)
+ return;
+
+ if (phy_read(phydev, MII_88E1318S_PHY_WOL_CTRL) &
+ MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE)
+ wol->wolopts |= WAKE_MAGIC;
+
+ if (phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x00) < 0)
+ return;
+}
+
+static int m88e1318_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol)
+{
+ int err, oldpage, temp;
+
+ oldpage = phy_read(phydev, MII_MARVELL_PHY_PAGE);
+
+ if (wol->wolopts & WAKE_MAGIC) {
+ /* Explicitly switch to page 0x00, just to be sure */
+ err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x00);
+ if (err < 0)
+ return err;
+
+ /* Enable the WOL interrupt */
+ temp = phy_read(phydev, MII_88E1318S_PHY_CSIER);
+ temp |= MII_88E1318S_PHY_CSIER_WOL_EIE;
+ err = phy_write(phydev, MII_88E1318S_PHY_CSIER, temp);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, MII_MARVELL_PHY_PAGE,
+ MII_88E1318S_PHY_LED_PAGE);
+ if (err < 0)
+ return err;
+
+ /* Setup LED[2] as interrupt pin (active low) */
+ temp = phy_read(phydev, MII_88E1318S_PHY_LED_TCR);
+ temp &= ~MII_88E1318S_PHY_LED_TCR_FORCE_INT;
+ temp |= MII_88E1318S_PHY_LED_TCR_INTn_ENABLE;
+ temp |= MII_88E1318S_PHY_LED_TCR_INT_ACTIVE_LOW;
+ err = phy_write(phydev, MII_88E1318S_PHY_LED_TCR, temp);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, MII_MARVELL_PHY_PAGE,
+ MII_88E1318S_PHY_WOL_PAGE);
+ if (err < 0)
+ return err;
+
+ /* Store the device address for the magic packet */
+ err = phy_write(phydev, MII_88E1318S_PHY_MAGIC_PACKET_WORD2,
+ ((phydev->attached_dev->dev_addr[5] << 8) |
+ phydev->attached_dev->dev_addr[4]));
+ if (err < 0)
+ return err;
+ err = phy_write(phydev, MII_88E1318S_PHY_MAGIC_PACKET_WORD1,
+ ((phydev->attached_dev->dev_addr[3] << 8) |
+ phydev->attached_dev->dev_addr[2]));
+ if (err < 0)
+ return err;
+ err = phy_write(phydev, MII_88E1318S_PHY_MAGIC_PACKET_WORD0,
+ ((phydev->attached_dev->dev_addr[1] << 8) |
+ phydev->attached_dev->dev_addr[0]));
+ if (err < 0)
+ return err;
+
+ /* Clear WOL status and enable magic packet matching */
+ temp = phy_read(phydev, MII_88E1318S_PHY_WOL_CTRL);
+ temp |= MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS;
+ temp |= MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE;
+ err = phy_write(phydev, MII_88E1318S_PHY_WOL_CTRL, temp);
+ if (err < 0)
+ return err;
+ } else {
+ err = phy_write(phydev, MII_MARVELL_PHY_PAGE,
+ MII_88E1318S_PHY_WOL_PAGE);
+ if (err < 0)
+ return err;
+
+ /* Clear WOL status and disable magic packet matching */
+ temp = phy_read(phydev, MII_88E1318S_PHY_WOL_CTRL);
+ temp |= MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS;
+ temp &= ~MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE;
+ err = phy_write(phydev, MII_88E1318S_PHY_WOL_CTRL, temp);
+ if (err < 0)
+ return err;
+ }
+
+ err = phy_write(phydev, MII_MARVELL_PHY_PAGE, oldpage);
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+static struct phy_driver marvell_drivers[] = {
+ {
+ .phy_id = MARVELL_PHY_ID_88E1101,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
+ .name = "Marvell 88E1101",
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_aneg = &marvell_config_aneg,
+ .read_status = &genphy_read_status,
+ .ack_interrupt = &marvell_ack_interrupt,
+ .config_intr = &marvell_config_intr,
+ .resume = &genphy_resume,
+ .suspend = &genphy_suspend,
+ .driver = { .owner = THIS_MODULE },
+ },
+ {
+ .phy_id = MARVELL_PHY_ID_88E1112,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
+ .name = "Marvell 88E1112",
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = &m88e1111_config_init,
+ .config_aneg = &marvell_config_aneg,
+ .read_status = &genphy_read_status,
+ .ack_interrupt = &marvell_ack_interrupt,
+ .config_intr = &marvell_config_intr,
+ .resume = &genphy_resume,
+ .suspend = &genphy_suspend,
+ .driver = { .owner = THIS_MODULE },
+ },
+ {
+ .phy_id = MARVELL_PHY_ID_88E1111,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
+ .name = "Marvell 88E1111",
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = &m88e1111_config_init,
+ .config_aneg = &marvell_config_aneg,
+ .read_status = &marvell_read_status,
+ .ack_interrupt = &marvell_ack_interrupt,
+ .config_intr = &marvell_config_intr,
+ .resume = &genphy_resume,
+ .suspend = &genphy_suspend,
+ .driver = { .owner = THIS_MODULE },
+ },
+ {
+ .phy_id = MARVELL_PHY_ID_88E1118,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
+ .name = "Marvell 88E1118",
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = &m88e1118_config_init,
+ .config_aneg = &m88e1118_config_aneg,
+ .read_status = &genphy_read_status,
+ .ack_interrupt = &marvell_ack_interrupt,
+ .config_intr = &marvell_config_intr,
+ .resume = &genphy_resume,
+ .suspend = &genphy_suspend,
+ .driver = {.owner = THIS_MODULE,},
+ },
+ {
+ .phy_id = MARVELL_PHY_ID_88E1121R,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
+ .name = "Marvell 88E1121R",
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_aneg = &m88e1121_config_aneg,
+ .read_status = &marvell_read_status,
+ .ack_interrupt = &marvell_ack_interrupt,
+ .config_intr = &marvell_config_intr,
+ .did_interrupt = &m88e1121_did_interrupt,
+ .resume = &genphy_resume,
+ .suspend = &genphy_suspend,
+ .driver = { .owner = THIS_MODULE },
+ },
+ {
+ .phy_id = MARVELL_PHY_ID_88E1318S,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
+ .name = "Marvell 88E1318S",
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_aneg = &m88e1318_config_aneg,
+ .read_status = &marvell_read_status,
+ .ack_interrupt = &marvell_ack_interrupt,
+ .config_intr = &marvell_config_intr,
+ .did_interrupt = &m88e1121_did_interrupt,
+ .get_wol = &m88e1318_get_wol,
+ .set_wol = &m88e1318_set_wol,
+ .resume = &genphy_resume,
+ .suspend = &genphy_suspend,
+ .driver = { .owner = THIS_MODULE },
+ },
+ {
+ .phy_id = MARVELL_PHY_ID_88E1145,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
+ .name = "Marvell 88E1145",
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = &m88e1145_config_init,
+ .config_aneg = &marvell_config_aneg,
+ .read_status = &genphy_read_status,
+ .ack_interrupt = &marvell_ack_interrupt,
+ .config_intr = &marvell_config_intr,
+ .resume = &genphy_resume,
+ .suspend = &genphy_suspend,
+ .driver = { .owner = THIS_MODULE },
+ },
+ {
+ .phy_id = MARVELL_PHY_ID_88E1149R,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
+ .name = "Marvell 88E1149R",
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = &m88e1149_config_init,
+ .config_aneg = &m88e1118_config_aneg,
+ .read_status = &genphy_read_status,
+ .ack_interrupt = &marvell_ack_interrupt,
+ .config_intr = &marvell_config_intr,
+ .resume = &genphy_resume,
+ .suspend = &genphy_suspend,
+ .driver = { .owner = THIS_MODULE },
+ },
+ {
+ .phy_id = MARVELL_PHY_ID_88E1240,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
+ .name = "Marvell 88E1240",
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = &m88e1111_config_init,
+ .config_aneg = &marvell_config_aneg,
+ .read_status = &genphy_read_status,
+ .ack_interrupt = &marvell_ack_interrupt,
+ .config_intr = &marvell_config_intr,
+ .resume = &genphy_resume,
+ .suspend = &genphy_suspend,
+ .driver = { .owner = THIS_MODULE },
+ },
+ {
+ .phy_id = MARVELL_PHY_ID_88E1116R,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
+ .name = "Marvell 88E1116R",
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = &m88e1116r_config_init,
+ .config_aneg = &genphy_config_aneg,
+ .read_status = &genphy_read_status,
+ .ack_interrupt = &marvell_ack_interrupt,
+ .config_intr = &marvell_config_intr,
+ .resume = &genphy_resume,
+ .suspend = &genphy_suspend,
+ .driver = { .owner = THIS_MODULE },
+ },
+ {
+ .phy_id = MARVELL_PHY_ID_88E1510,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
+ .name = "Marvell 88E1510",
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_aneg = &m88e1510_config_aneg,
+ .read_status = &marvell_read_status,
+ .ack_interrupt = &marvell_ack_interrupt,
+ .config_intr = &marvell_config_intr,
+ .did_interrupt = &m88e1121_did_interrupt,
+ .resume = &genphy_resume,
+ .suspend = &genphy_suspend,
+ .driver = { .owner = THIS_MODULE },
+ },
+ {
+ .phy_id = MARVELL_PHY_ID_88E3016,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
+ .name = "Marvell 88E3016",
+ .features = PHY_BASIC_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_aneg = &genphy_config_aneg,
+ .config_init = &m88e3016_config_init,
+ .aneg_done = &marvell_aneg_done,
+ .read_status = &marvell_read_status,
+ .ack_interrupt = &marvell_ack_interrupt,
+ .config_intr = &marvell_config_intr,
+ .did_interrupt = &m88e1121_did_interrupt,
+ .resume = &genphy_resume,
+ .suspend = &genphy_suspend,
+ .driver = { .owner = THIS_MODULE },
+ },
+};
+
+module_phy_driver(marvell_drivers);
+
+static struct mdio_device_id __maybe_unused marvell_tbl[] = {
+ { MARVELL_PHY_ID_88E1101, MARVELL_PHY_ID_MASK },
+ { MARVELL_PHY_ID_88E1112, MARVELL_PHY_ID_MASK },
+ { MARVELL_PHY_ID_88E1111, MARVELL_PHY_ID_MASK },
+ { MARVELL_PHY_ID_88E1118, MARVELL_PHY_ID_MASK },
+ { MARVELL_PHY_ID_88E1121R, MARVELL_PHY_ID_MASK },
+ { MARVELL_PHY_ID_88E1145, MARVELL_PHY_ID_MASK },
+ { MARVELL_PHY_ID_88E1149R, MARVELL_PHY_ID_MASK },
+ { MARVELL_PHY_ID_88E1240, MARVELL_PHY_ID_MASK },
+ { MARVELL_PHY_ID_88E1318S, MARVELL_PHY_ID_MASK },
+ { MARVELL_PHY_ID_88E1116R, MARVELL_PHY_ID_MASK },
+ { MARVELL_PHY_ID_88E1510, MARVELL_PHY_ID_MASK },
+ { MARVELL_PHY_ID_88E3016, MARVELL_PHY_ID_MASK },
+ { }
+};
+
+MODULE_DEVICE_TABLE(mdio, marvell_tbl);
diff --git a/kernel/drivers/net/phy/mdio-bcm-unimac.c b/kernel/drivers/net/phy/mdio-bcm-unimac.c
new file mode 100644
index 000000000..414fdf1f3
--- /dev/null
+++ b/kernel/drivers/net/phy/mdio-bcm-unimac.c
@@ -0,0 +1,212 @@
+/*
+ * Broadcom UniMAC MDIO bus controller driver
+ *
+ * Copyright (C) 2014, Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/of_mdio.h>
+
+#define MDIO_CMD 0x00
+#define MDIO_START_BUSY (1 << 29)
+#define MDIO_READ_FAIL (1 << 28)
+#define MDIO_RD (2 << 26)
+#define MDIO_WR (1 << 26)
+#define MDIO_PMD_SHIFT 21
+#define MDIO_PMD_MASK 0x1F
+#define MDIO_REG_SHIFT 16
+#define MDIO_REG_MASK 0x1F
+
+#define MDIO_CFG 0x04
+#define MDIO_C22 (1 << 0)
+#define MDIO_C45 0
+#define MDIO_CLK_DIV_SHIFT 4
+#define MDIO_CLK_DIV_MASK 0x3F
+#define MDIO_SUPP_PREAMBLE (1 << 12)
+
+struct unimac_mdio_priv {
+ struct mii_bus *mii_bus;
+ void __iomem *base;
+};
+
+static inline void unimac_mdio_start(struct unimac_mdio_priv *priv)
+{
+ u32 reg;
+
+ reg = __raw_readl(priv->base + MDIO_CMD);
+ reg |= MDIO_START_BUSY;
+ __raw_writel(reg, priv->base + MDIO_CMD);
+}
+
+static inline unsigned int unimac_mdio_busy(struct unimac_mdio_priv *priv)
+{
+ return __raw_readl(priv->base + MDIO_CMD) & MDIO_START_BUSY;
+}
+
+static int unimac_mdio_read(struct mii_bus *bus, int phy_id, int reg)
+{
+ struct unimac_mdio_priv *priv = bus->priv;
+ unsigned int timeout = 1000;
+ u32 cmd;
+
+ /* Prepare the read operation */
+ cmd = MDIO_RD | (phy_id << MDIO_PMD_SHIFT) | (reg << MDIO_REG_SHIFT);
+ __raw_writel(cmd, priv->base + MDIO_CMD);
+
+ /* Start MDIO transaction */
+ unimac_mdio_start(priv);
+
+ do {
+ if (!unimac_mdio_busy(priv))
+ break;
+
+ usleep_range(1000, 2000);
+ } while (timeout--);
+
+ if (!timeout)
+ return -ETIMEDOUT;
+
+ cmd = __raw_readl(priv->base + MDIO_CMD);
+ if (cmd & MDIO_READ_FAIL)
+ return -EIO;
+
+ return cmd & 0xffff;
+}
+
+static int unimac_mdio_write(struct mii_bus *bus, int phy_id,
+ int reg, u16 val)
+{
+ struct unimac_mdio_priv *priv = bus->priv;
+ unsigned int timeout = 1000;
+ u32 cmd;
+
+ /* Prepare the write operation */
+ cmd = MDIO_WR | (phy_id << MDIO_PMD_SHIFT) |
+ (reg << MDIO_REG_SHIFT) | (0xffff & val);
+ __raw_writel(cmd, priv->base + MDIO_CMD);
+
+ unimac_mdio_start(priv);
+
+ do {
+ if (!unimac_mdio_busy(priv))
+ break;
+
+ usleep_range(1000, 2000);
+ } while (timeout--);
+
+ if (!timeout)
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+static int unimac_mdio_probe(struct platform_device *pdev)
+{
+ struct unimac_mdio_priv *priv;
+ struct device_node *np;
+ struct mii_bus *bus;
+ struct resource *r;
+ int ret;
+
+ np = pdev->dev.of_node;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+ /* Just ioremap, as this MDIO block is usually integrated into an
+ * Ethernet MAC controller register range
+ */
+ priv->base = devm_ioremap(&pdev->dev, r->start, resource_size(r));
+ if (!priv->base) {
+ dev_err(&pdev->dev, "failed to remap register\n");
+ return -ENOMEM;
+ }
+
+ priv->mii_bus = mdiobus_alloc();
+ if (!priv->mii_bus)
+ return -ENOMEM;
+
+ bus = priv->mii_bus;
+ bus->priv = priv;
+ bus->name = "unimac MII bus";
+ bus->parent = &pdev->dev;
+ bus->read = unimac_mdio_read;
+ bus->write = unimac_mdio_write;
+ snprintf(bus->id, MII_BUS_ID_SIZE, "%s", pdev->name);
+
+ bus->irq = kcalloc(PHY_MAX_ADDR, sizeof(int), GFP_KERNEL);
+ if (!bus->irq) {
+ ret = -ENOMEM;
+ goto out_mdio_free;
+ }
+
+ ret = of_mdiobus_register(bus, np);
+ if (ret) {
+ dev_err(&pdev->dev, "MDIO bus registration failed\n");
+ goto out_mdio_irq;
+ }
+
+ platform_set_drvdata(pdev, priv);
+
+ dev_info(&pdev->dev, "Broadcom UniMAC MDIO bus at 0x%p\n", priv->base);
+
+ return 0;
+
+out_mdio_irq:
+ kfree(bus->irq);
+out_mdio_free:
+ mdiobus_free(bus);
+ return ret;
+}
+
+static int unimac_mdio_remove(struct platform_device *pdev)
+{
+ struct unimac_mdio_priv *priv = platform_get_drvdata(pdev);
+
+ mdiobus_unregister(priv->mii_bus);
+ kfree(priv->mii_bus->irq);
+ mdiobus_free(priv->mii_bus);
+
+ return 0;
+}
+
+static const struct of_device_id unimac_mdio_ids[] = {
+ { .compatible = "brcm,genet-mdio-v4", },
+ { .compatible = "brcm,genet-mdio-v3", },
+ { .compatible = "brcm,genet-mdio-v2", },
+ { .compatible = "brcm,genet-mdio-v1", },
+ { .compatible = "brcm,unimac-mdio", },
+ { /* sentinel */ },
+};
+
+static struct platform_driver unimac_mdio_driver = {
+ .driver = {
+ .name = "unimac-mdio",
+ .of_match_table = unimac_mdio_ids,
+ },
+ .probe = unimac_mdio_probe,
+ .remove = unimac_mdio_remove,
+};
+module_platform_driver(unimac_mdio_driver);
+
+MODULE_AUTHOR("Broadcom Corporation");
+MODULE_DESCRIPTION("Broadcom UniMAC MDIO bus controller");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:unimac-mdio");
diff --git a/kernel/drivers/net/phy/mdio-bitbang.c b/kernel/drivers/net/phy/mdio-bitbang.c
new file mode 100644
index 000000000..daec9b05d
--- /dev/null
+++ b/kernel/drivers/net/phy/mdio-bitbang.c
@@ -0,0 +1,241 @@
+/*
+ * Bitbanged MDIO support.
+ *
+ * Author: Scott Wood <scottwood@freescale.com>
+ * Copyright (c) 2007 Freescale Semiconductor
+ *
+ * Based on CPM2 MDIO code which is:
+ *
+ * Copyright (c) 2003 Intracom S.A.
+ * by Pantelis Antoniou <panto@intracom.gr>
+ *
+ * 2005 (c) MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/mdio-bitbang.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+
+#define MDIO_READ 2
+#define MDIO_WRITE 1
+
+#define MDIO_C45 (1<<15)
+#define MDIO_C45_ADDR (MDIO_C45 | 0)
+#define MDIO_C45_READ (MDIO_C45 | 3)
+#define MDIO_C45_WRITE (MDIO_C45 | 1)
+
+#define MDIO_SETUP_TIME 10
+#define MDIO_HOLD_TIME 10
+
+/* Minimum MDC period is 400 ns, plus some margin for error. MDIO_DELAY
+ * is done twice per period.
+ */
+#define MDIO_DELAY 250
+
+/* The PHY may take up to 300 ns to produce data, plus some margin
+ * for error.
+ */
+#define MDIO_READ_DELAY 350
+
+/* MDIO must already be configured as output. */
+static void mdiobb_send_bit(struct mdiobb_ctrl *ctrl, int val)
+{
+ const struct mdiobb_ops *ops = ctrl->ops;
+
+ ops->set_mdio_data(ctrl, val);
+ ndelay(MDIO_DELAY);
+ ops->set_mdc(ctrl, 1);
+ ndelay(MDIO_DELAY);
+ ops->set_mdc(ctrl, 0);
+}
+
+/* MDIO must already be configured as input. */
+static int mdiobb_get_bit(struct mdiobb_ctrl *ctrl)
+{
+ const struct mdiobb_ops *ops = ctrl->ops;
+
+ ndelay(MDIO_DELAY);
+ ops->set_mdc(ctrl, 1);
+ ndelay(MDIO_READ_DELAY);
+ ops->set_mdc(ctrl, 0);
+
+ return ops->get_mdio_data(ctrl);
+}
+
+/* MDIO must already be configured as output. */
+static void mdiobb_send_num(struct mdiobb_ctrl *ctrl, u16 val, int bits)
+{
+ int i;
+
+ for (i = bits - 1; i >= 0; i--)
+ mdiobb_send_bit(ctrl, (val >> i) & 1);
+}
+
+/* MDIO must already be configured as input. */
+static u16 mdiobb_get_num(struct mdiobb_ctrl *ctrl, int bits)
+{
+ int i;
+ u16 ret = 0;
+
+ for (i = bits - 1; i >= 0; i--) {
+ ret <<= 1;
+ ret |= mdiobb_get_bit(ctrl);
+ }
+
+ return ret;
+}
+
+/* Utility to send the preamble, address, and
+ * register (common to read and write).
+ */
+static void mdiobb_cmd(struct mdiobb_ctrl *ctrl, int op, u8 phy, u8 reg)
+{
+ const struct mdiobb_ops *ops = ctrl->ops;
+ int i;
+
+ ops->set_mdio_dir(ctrl, 1);
+
+ /*
+ * Send a 32 bit preamble ('1's) with an extra '1' bit for good
+ * measure. The IEEE spec says this is a PHY optional
+ * requirement. The AMD 79C874 requires one after power up and
+ * one after a MII communications error. This means that we are
+ * doing more preambles than we need, but it is safer and will be
+ * much more robust.
+ */
+
+ for (i = 0; i < 32; i++)
+ mdiobb_send_bit(ctrl, 1);
+
+ /* send the start bit (01) and the read opcode (10) or write (10).
+ Clause 45 operation uses 00 for the start and 11, 10 for
+ read/write */
+ mdiobb_send_bit(ctrl, 0);
+ if (op & MDIO_C45)
+ mdiobb_send_bit(ctrl, 0);
+ else
+ mdiobb_send_bit(ctrl, 1);
+ mdiobb_send_bit(ctrl, (op >> 1) & 1);
+ mdiobb_send_bit(ctrl, (op >> 0) & 1);
+
+ mdiobb_send_num(ctrl, phy, 5);
+ mdiobb_send_num(ctrl, reg, 5);
+}
+
+/* In clause 45 mode all commands are prefixed by MDIO_ADDR to specify the
+ lower 16 bits of the 21 bit address. This transfer is done identically to a
+ MDIO_WRITE except for a different code. To enable clause 45 mode or
+ MII_ADDR_C45 into the address. Theoretically clause 45 and normal devices
+ can exist on the same bus. Normal devices should ignore the MDIO_ADDR
+ phase. */
+static int mdiobb_cmd_addr(struct mdiobb_ctrl *ctrl, int phy, u32 addr)
+{
+ unsigned int dev_addr = (addr >> 16) & 0x1F;
+ unsigned int reg = addr & 0xFFFF;
+ mdiobb_cmd(ctrl, MDIO_C45_ADDR, phy, dev_addr);
+
+ /* send the turnaround (10) */
+ mdiobb_send_bit(ctrl, 1);
+ mdiobb_send_bit(ctrl, 0);
+
+ mdiobb_send_num(ctrl, reg, 16);
+
+ ctrl->ops->set_mdio_dir(ctrl, 0);
+ mdiobb_get_bit(ctrl);
+
+ return dev_addr;
+}
+
+static int mdiobb_read(struct mii_bus *bus, int phy, int reg)
+{
+ struct mdiobb_ctrl *ctrl = bus->priv;
+ int ret, i;
+
+ if (reg & MII_ADDR_C45) {
+ reg = mdiobb_cmd_addr(ctrl, phy, reg);
+ mdiobb_cmd(ctrl, MDIO_C45_READ, phy, reg);
+ } else
+ mdiobb_cmd(ctrl, MDIO_READ, phy, reg);
+
+ ctrl->ops->set_mdio_dir(ctrl, 0);
+
+ /* check the turnaround bit: the PHY should be driving it to zero */
+ if (mdiobb_get_bit(ctrl) != 0) {
+ /* PHY didn't drive TA low -- flush any bits it
+ * may be trying to send.
+ */
+ for (i = 0; i < 32; i++)
+ mdiobb_get_bit(ctrl);
+
+ return 0xffff;
+ }
+
+ ret = mdiobb_get_num(ctrl, 16);
+ mdiobb_get_bit(ctrl);
+ return ret;
+}
+
+static int mdiobb_write(struct mii_bus *bus, int phy, int reg, u16 val)
+{
+ struct mdiobb_ctrl *ctrl = bus->priv;
+
+ if (reg & MII_ADDR_C45) {
+ reg = mdiobb_cmd_addr(ctrl, phy, reg);
+ mdiobb_cmd(ctrl, MDIO_C45_WRITE, phy, reg);
+ } else
+ mdiobb_cmd(ctrl, MDIO_WRITE, phy, reg);
+
+ /* send the turnaround (10) */
+ mdiobb_send_bit(ctrl, 1);
+ mdiobb_send_bit(ctrl, 0);
+
+ mdiobb_send_num(ctrl, val, 16);
+
+ ctrl->ops->set_mdio_dir(ctrl, 0);
+ mdiobb_get_bit(ctrl);
+ return 0;
+}
+
+static int mdiobb_reset(struct mii_bus *bus)
+{
+ struct mdiobb_ctrl *ctrl = bus->priv;
+ if (ctrl->reset)
+ ctrl->reset(bus);
+ return 0;
+}
+
+struct mii_bus *alloc_mdio_bitbang(struct mdiobb_ctrl *ctrl)
+{
+ struct mii_bus *bus;
+
+ bus = mdiobus_alloc();
+ if (!bus)
+ return NULL;
+
+ __module_get(ctrl->ops->owner);
+
+ bus->read = mdiobb_read;
+ bus->write = mdiobb_write;
+ bus->reset = mdiobb_reset;
+ bus->priv = ctrl;
+
+ return bus;
+}
+EXPORT_SYMBOL(alloc_mdio_bitbang);
+
+void free_mdio_bitbang(struct mii_bus *bus)
+{
+ struct mdiobb_ctrl *ctrl = bus->priv;
+
+ module_put(ctrl->ops->owner);
+ mdiobus_free(bus);
+}
+EXPORT_SYMBOL(free_mdio_bitbang);
+
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/net/phy/mdio-gpio.c b/kernel/drivers/net/phy/mdio-gpio.c
new file mode 100644
index 000000000..53d18150f
--- /dev/null
+++ b/kernel/drivers/net/phy/mdio-gpio.c
@@ -0,0 +1,278 @@
+/*
+ * GPIO based MDIO bitbang driver.
+ * Supports OpenFirmware.
+ *
+ * Copyright (c) 2008 CSE Semaphore Belgium.
+ * by Laurent Pinchart <laurentp@cse-semaphore.com>
+ *
+ * Copyright (C) 2008, Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * Based on earlier work by
+ *
+ * Copyright (c) 2003 Intracom S.A.
+ * by Pantelis Antoniou <panto@intracom.gr>
+ *
+ * 2005 (c) MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/mdio-gpio.h>
+
+#include <linux/of_gpio.h>
+#include <linux/of_mdio.h>
+
+struct mdio_gpio_info {
+ struct mdiobb_ctrl ctrl;
+ int mdc, mdio, mdo;
+ int mdc_active_low, mdio_active_low, mdo_active_low;
+};
+
+static void *mdio_gpio_of_get_data(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct mdio_gpio_platform_data *pdata;
+ enum of_gpio_flags flags;
+ int ret;
+
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return NULL;
+
+ ret = of_get_gpio_flags(np, 0, &flags);
+ if (ret < 0)
+ return NULL;
+
+ pdata->mdc = ret;
+ pdata->mdc_active_low = flags & OF_GPIO_ACTIVE_LOW;
+
+ ret = of_get_gpio_flags(np, 1, &flags);
+ if (ret < 0)
+ return NULL;
+ pdata->mdio = ret;
+ pdata->mdio_active_low = flags & OF_GPIO_ACTIVE_LOW;
+
+ ret = of_get_gpio_flags(np, 2, &flags);
+ if (ret > 0) {
+ pdata->mdo = ret;
+ pdata->mdo_active_low = flags & OF_GPIO_ACTIVE_LOW;
+ }
+
+ return pdata;
+}
+
+static void mdio_dir(struct mdiobb_ctrl *ctrl, int dir)
+{
+ struct mdio_gpio_info *bitbang =
+ container_of(ctrl, struct mdio_gpio_info, ctrl);
+
+ if (bitbang->mdo) {
+ /* Separate output pin. Always set its value to high
+ * when changing direction. If direction is input,
+ * assume the pin serves as pull-up. If direction is
+ * output, the default value is high.
+ */
+ gpio_set_value_cansleep(bitbang->mdo,
+ 1 ^ bitbang->mdo_active_low);
+ return;
+ }
+
+ if (dir)
+ gpio_direction_output(bitbang->mdio,
+ 1 ^ bitbang->mdio_active_low);
+ else
+ gpio_direction_input(bitbang->mdio);
+}
+
+static int mdio_get(struct mdiobb_ctrl *ctrl)
+{
+ struct mdio_gpio_info *bitbang =
+ container_of(ctrl, struct mdio_gpio_info, ctrl);
+
+ return gpio_get_value_cansleep(bitbang->mdio) ^
+ bitbang->mdio_active_low;
+}
+
+static void mdio_set(struct mdiobb_ctrl *ctrl, int what)
+{
+ struct mdio_gpio_info *bitbang =
+ container_of(ctrl, struct mdio_gpio_info, ctrl);
+
+ if (bitbang->mdo)
+ gpio_set_value_cansleep(bitbang->mdo,
+ what ^ bitbang->mdo_active_low);
+ else
+ gpio_set_value_cansleep(bitbang->mdio,
+ what ^ bitbang->mdio_active_low);
+}
+
+static void mdc_set(struct mdiobb_ctrl *ctrl, int what)
+{
+ struct mdio_gpio_info *bitbang =
+ container_of(ctrl, struct mdio_gpio_info, ctrl);
+
+ gpio_set_value_cansleep(bitbang->mdc, what ^ bitbang->mdc_active_low);
+}
+
+static struct mdiobb_ops mdio_gpio_ops = {
+ .owner = THIS_MODULE,
+ .set_mdc = mdc_set,
+ .set_mdio_dir = mdio_dir,
+ .set_mdio_data = mdio_set,
+ .get_mdio_data = mdio_get,
+};
+
+static struct mii_bus *mdio_gpio_bus_init(struct device *dev,
+ struct mdio_gpio_platform_data *pdata,
+ int bus_id)
+{
+ struct mii_bus *new_bus;
+ struct mdio_gpio_info *bitbang;
+ int i;
+
+ bitbang = devm_kzalloc(dev, sizeof(*bitbang), GFP_KERNEL);
+ if (!bitbang)
+ goto out;
+
+ bitbang->ctrl.ops = &mdio_gpio_ops;
+ bitbang->ctrl.reset = pdata->reset;
+ bitbang->mdc = pdata->mdc;
+ bitbang->mdc_active_low = pdata->mdc_active_low;
+ bitbang->mdio = pdata->mdio;
+ bitbang->mdio_active_low = pdata->mdio_active_low;
+ bitbang->mdo = pdata->mdo;
+ bitbang->mdo_active_low = pdata->mdo_active_low;
+
+ new_bus = alloc_mdio_bitbang(&bitbang->ctrl);
+ if (!new_bus)
+ goto out;
+
+ new_bus->name = "GPIO Bitbanged MDIO",
+
+ new_bus->phy_mask = pdata->phy_mask;
+ new_bus->irq = pdata->irqs;
+ new_bus->parent = dev;
+
+ if (new_bus->phy_mask == ~0)
+ goto out_free_bus;
+
+ for (i = 0; i < PHY_MAX_ADDR; i++)
+ if (!new_bus->irq[i])
+ new_bus->irq[i] = PHY_POLL;
+
+ if (bus_id != -1)
+ snprintf(new_bus->id, MII_BUS_ID_SIZE, "gpio-%x", bus_id);
+ else
+ strncpy(new_bus->id, "gpio", MII_BUS_ID_SIZE);
+
+ if (devm_gpio_request(dev, bitbang->mdc, "mdc"))
+ goto out_free_bus;
+
+ if (devm_gpio_request(dev, bitbang->mdio, "mdio"))
+ goto out_free_bus;
+
+ if (bitbang->mdo) {
+ if (devm_gpio_request(dev, bitbang->mdo, "mdo"))
+ goto out_free_bus;
+ gpio_direction_output(bitbang->mdo, 1);
+ gpio_direction_input(bitbang->mdio);
+ }
+
+ gpio_direction_output(bitbang->mdc, 0);
+
+ dev_set_drvdata(dev, new_bus);
+
+ return new_bus;
+
+out_free_bus:
+ free_mdio_bitbang(new_bus);
+out:
+ return NULL;
+}
+
+static void mdio_gpio_bus_deinit(struct device *dev)
+{
+ struct mii_bus *bus = dev_get_drvdata(dev);
+
+ free_mdio_bitbang(bus);
+}
+
+static void mdio_gpio_bus_destroy(struct device *dev)
+{
+ struct mii_bus *bus = dev_get_drvdata(dev);
+
+ mdiobus_unregister(bus);
+ mdio_gpio_bus_deinit(dev);
+}
+
+static int mdio_gpio_probe(struct platform_device *pdev)
+{
+ struct mdio_gpio_platform_data *pdata;
+ struct mii_bus *new_bus;
+ int ret, bus_id;
+
+ if (pdev->dev.of_node) {
+ pdata = mdio_gpio_of_get_data(pdev);
+ bus_id = of_alias_get_id(pdev->dev.of_node, "mdio-gpio");
+ if (bus_id < 0) {
+ dev_warn(&pdev->dev, "failed to get alias id\n");
+ bus_id = 0;
+ }
+ } else {
+ pdata = dev_get_platdata(&pdev->dev);
+ bus_id = pdev->id;
+ }
+
+ if (!pdata)
+ return -ENODEV;
+
+ new_bus = mdio_gpio_bus_init(&pdev->dev, pdata, bus_id);
+ if (!new_bus)
+ return -ENODEV;
+
+ if (pdev->dev.of_node)
+ ret = of_mdiobus_register(new_bus, pdev->dev.of_node);
+ else
+ ret = mdiobus_register(new_bus);
+
+ if (ret)
+ mdio_gpio_bus_deinit(&pdev->dev);
+
+ return ret;
+}
+
+static int mdio_gpio_remove(struct platform_device *pdev)
+{
+ mdio_gpio_bus_destroy(&pdev->dev);
+
+ return 0;
+}
+
+static const struct of_device_id mdio_gpio_of_match[] = {
+ { .compatible = "virtual,mdio-gpio", },
+ { /* sentinel */ }
+};
+
+static struct platform_driver mdio_gpio_driver = {
+ .probe = mdio_gpio_probe,
+ .remove = mdio_gpio_remove,
+ .driver = {
+ .name = "mdio-gpio",
+ .of_match_table = mdio_gpio_of_match,
+ },
+};
+
+module_platform_driver(mdio_gpio_driver);
+
+MODULE_ALIAS("platform:mdio-gpio");
+MODULE_AUTHOR("Laurent Pinchart, Paulius Zaleckas");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Generic driver for MDIO bus emulation using GPIO");
diff --git a/kernel/drivers/net/phy/mdio-moxart.c b/kernel/drivers/net/phy/mdio-moxart.c
new file mode 100644
index 000000000..f1fc51f65
--- /dev/null
+++ b/kernel/drivers/net/phy/mdio-moxart.c
@@ -0,0 +1,200 @@
+/* MOXA ART Ethernet (RTL8201CP) MDIO interface driver
+ *
+ * Copyright (C) 2013 Jonas Jensen <jonas.jensen@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_address.h>
+#include <linux/of_mdio.h>
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+
+#define REG_PHY_CTRL 0
+#define REG_PHY_WRITE_DATA 4
+
+/* REG_PHY_CTRL */
+#define MIIWR BIT(27) /* init write sequence (auto cleared)*/
+#define MIIRD BIT(26)
+#define REGAD_MASK 0x3e00000
+#define PHYAD_MASK 0x1f0000
+#define MIIRDATA_MASK 0xffff
+
+/* REG_PHY_WRITE_DATA */
+#define MIIWDATA_MASK 0xffff
+
+struct moxart_mdio_data {
+ void __iomem *base;
+};
+
+static int moxart_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
+{
+ struct moxart_mdio_data *data = bus->priv;
+ u32 ctrl = 0;
+ unsigned int count = 5;
+
+ dev_dbg(&bus->dev, "%s\n", __func__);
+
+ ctrl |= MIIRD | ((mii_id << 16) & PHYAD_MASK) |
+ ((regnum << 21) & REGAD_MASK);
+
+ writel(ctrl, data->base + REG_PHY_CTRL);
+
+ do {
+ ctrl = readl(data->base + REG_PHY_CTRL);
+
+ if (!(ctrl & MIIRD))
+ return ctrl & MIIRDATA_MASK;
+
+ mdelay(10);
+ count--;
+ } while (count > 0);
+
+ dev_dbg(&bus->dev, "%s timed out\n", __func__);
+
+ return -ETIMEDOUT;
+}
+
+static int moxart_mdio_write(struct mii_bus *bus, int mii_id,
+ int regnum, u16 value)
+{
+ struct moxart_mdio_data *data = bus->priv;
+ u32 ctrl = 0;
+ unsigned int count = 5;
+
+ dev_dbg(&bus->dev, "%s\n", __func__);
+
+ ctrl |= MIIWR | ((mii_id << 16) & PHYAD_MASK) |
+ ((regnum << 21) & REGAD_MASK);
+
+ value &= MIIWDATA_MASK;
+
+ writel(value, data->base + REG_PHY_WRITE_DATA);
+ writel(ctrl, data->base + REG_PHY_CTRL);
+
+ do {
+ ctrl = readl(data->base + REG_PHY_CTRL);
+
+ if (!(ctrl & MIIWR))
+ return 0;
+
+ mdelay(10);
+ count--;
+ } while (count > 0);
+
+ dev_dbg(&bus->dev, "%s timed out\n", __func__);
+
+ return -ETIMEDOUT;
+}
+
+static int moxart_mdio_reset(struct mii_bus *bus)
+{
+ int data, i;
+
+ for (i = 0; i < PHY_MAX_ADDR; i++) {
+ data = moxart_mdio_read(bus, i, MII_BMCR);
+ if (data < 0)
+ continue;
+
+ data |= BMCR_RESET;
+ if (moxart_mdio_write(bus, i, MII_BMCR, data) < 0)
+ continue;
+ }
+
+ return 0;
+}
+
+static int moxart_mdio_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct mii_bus *bus;
+ struct moxart_mdio_data *data;
+ struct resource *res;
+ int ret, i;
+
+ bus = mdiobus_alloc_size(sizeof(*data));
+ if (!bus)
+ return -ENOMEM;
+
+ bus->name = "MOXA ART Ethernet MII";
+ bus->read = &moxart_mdio_read;
+ bus->write = &moxart_mdio_write;
+ bus->reset = &moxart_mdio_reset;
+ snprintf(bus->id, MII_BUS_ID_SIZE, "%s-%d-mii", pdev->name, pdev->id);
+ bus->parent = &pdev->dev;
+
+ bus->irq = devm_kzalloc(&pdev->dev, sizeof(int) * PHY_MAX_ADDR,
+ GFP_KERNEL);
+ if (!bus->irq) {
+ ret = -ENOMEM;
+ goto err_out_free_mdiobus;
+ }
+
+ /* Setting PHY_IGNORE_INTERRUPT here even if it has no effect,
+ * of_mdiobus_register() sets these PHY_POLL.
+ * Ideally, the interrupt from MAC controller could be used to
+ * detect link state changes, not polling, i.e. if there was
+ * a way phy_driver could set PHY_HAS_INTERRUPT but have that
+ * interrupt handled in ethernet drivercode.
+ */
+ for (i = 0; i < PHY_MAX_ADDR; i++)
+ bus->irq[i] = PHY_IGNORE_INTERRUPT;
+
+ data = bus->priv;
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ data->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(data->base)) {
+ ret = PTR_ERR(data->base);
+ goto err_out_free_mdiobus;
+ }
+
+ ret = of_mdiobus_register(bus, np);
+ if (ret < 0)
+ goto err_out_free_mdiobus;
+
+ platform_set_drvdata(pdev, bus);
+
+ return 0;
+
+err_out_free_mdiobus:
+ mdiobus_free(bus);
+ return ret;
+}
+
+static int moxart_mdio_remove(struct platform_device *pdev)
+{
+ struct mii_bus *bus = platform_get_drvdata(pdev);
+
+ mdiobus_unregister(bus);
+ mdiobus_free(bus);
+
+ return 0;
+}
+
+static const struct of_device_id moxart_mdio_dt_ids[] = {
+ { .compatible = "moxa,moxart-mdio" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, moxart_mdio_dt_ids);
+
+static struct platform_driver moxart_mdio_driver = {
+ .probe = moxart_mdio_probe,
+ .remove = moxart_mdio_remove,
+ .driver = {
+ .name = "moxart-mdio",
+ .of_match_table = moxart_mdio_dt_ids,
+ },
+};
+
+module_platform_driver(moxart_mdio_driver);
+
+MODULE_DESCRIPTION("MOXA ART MDIO interface driver");
+MODULE_AUTHOR("Jonas Jensen <jonas.jensen@gmail.com>");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/net/phy/mdio-mux-gpio.c b/kernel/drivers/net/phy/mdio-mux-gpio.c
new file mode 100644
index 000000000..66edd99bc
--- /dev/null
+++ b/kernel/drivers/net/phy/mdio-mux-gpio.c
@@ -0,0 +1,102 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2011, 2012 Cavium, Inc.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/device.h>
+#include <linux/of_mdio.h>
+#include <linux/module.h>
+#include <linux/phy.h>
+#include <linux/mdio-mux.h>
+#include <linux/gpio/consumer.h>
+
+#define DRV_VERSION "1.1"
+#define DRV_DESCRIPTION "GPIO controlled MDIO bus multiplexer driver"
+
+struct mdio_mux_gpio_state {
+ struct gpio_descs *gpios;
+ void *mux_handle;
+};
+
+static int mdio_mux_gpio_switch_fn(int current_child, int desired_child,
+ void *data)
+{
+ struct mdio_mux_gpio_state *s = data;
+ int values[s->gpios->ndescs];
+ unsigned int n;
+
+ if (current_child == desired_child)
+ return 0;
+
+ for (n = 0; n < s->gpios->ndescs; n++)
+ values[n] = (desired_child >> n) & 1;
+
+ gpiod_set_array_cansleep(s->gpios->ndescs, s->gpios->desc, values);
+
+ return 0;
+}
+
+static int mdio_mux_gpio_probe(struct platform_device *pdev)
+{
+ struct mdio_mux_gpio_state *s;
+ int r;
+
+ s = devm_kzalloc(&pdev->dev, sizeof(*s), GFP_KERNEL);
+ if (!s)
+ return -ENOMEM;
+
+ s->gpios = gpiod_get_array(&pdev->dev, NULL, GPIOD_OUT_LOW);
+ if (IS_ERR(s->gpios))
+ return PTR_ERR(s->gpios);
+
+ r = mdio_mux_init(&pdev->dev,
+ mdio_mux_gpio_switch_fn, &s->mux_handle, s);
+
+ if (r != 0) {
+ gpiod_put_array(s->gpios);
+ return r;
+ }
+
+ pdev->dev.platform_data = s;
+ return 0;
+}
+
+static int mdio_mux_gpio_remove(struct platform_device *pdev)
+{
+ struct mdio_mux_gpio_state *s = dev_get_platdata(&pdev->dev);
+ mdio_mux_uninit(s->mux_handle);
+ gpiod_put_array(s->gpios);
+ return 0;
+}
+
+static const struct of_device_id mdio_mux_gpio_match[] = {
+ {
+ .compatible = "mdio-mux-gpio",
+ },
+ {
+ /* Legacy compatible property. */
+ .compatible = "cavium,mdio-mux-sn74cbtlv3253",
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, mdio_mux_gpio_match);
+
+static struct platform_driver mdio_mux_gpio_driver = {
+ .driver = {
+ .name = "mdio-mux-gpio",
+ .of_match_table = mdio_mux_gpio_match,
+ },
+ .probe = mdio_mux_gpio_probe,
+ .remove = mdio_mux_gpio_remove,
+};
+
+module_platform_driver(mdio_mux_gpio_driver);
+
+MODULE_DESCRIPTION(DRV_DESCRIPTION);
+MODULE_VERSION(DRV_VERSION);
+MODULE_AUTHOR("David Daney");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/net/phy/mdio-mux-mmioreg.c b/kernel/drivers/net/phy/mdio-mux-mmioreg.c
new file mode 100644
index 000000000..2377c1341
--- /dev/null
+++ b/kernel/drivers/net/phy/mdio-mux-mmioreg.c
@@ -0,0 +1,169 @@
+/*
+ * Simple memory-mapped device MDIO MUX driver
+ *
+ * Author: Timur Tabi <timur@freescale.com>
+ *
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/device.h>
+#include <linux/of_address.h>
+#include <linux/of_mdio.h>
+#include <linux/module.h>
+#include <linux/phy.h>
+#include <linux/mdio-mux.h>
+
+struct mdio_mux_mmioreg_state {
+ void *mux_handle;
+ phys_addr_t phys;
+ uint8_t mask;
+};
+
+/*
+ * MDIO multiplexing switch function
+ *
+ * This function is called by the mdio-mux layer when it thinks the mdio bus
+ * multiplexer needs to switch.
+ *
+ * 'current_child' is the current value of the mux register (masked via
+ * s->mask).
+ *
+ * 'desired_child' is the value of the 'reg' property of the target child MDIO
+ * node.
+ *
+ * The first time this function is called, current_child == -1.
+ *
+ * If current_child == desired_child, then the mux is already set to the
+ * correct bus.
+ */
+static int mdio_mux_mmioreg_switch_fn(int current_child, int desired_child,
+ void *data)
+{
+ struct mdio_mux_mmioreg_state *s = data;
+
+ if (current_child ^ desired_child) {
+ void __iomem *p = ioremap(s->phys, 1);
+ uint8_t x, y;
+
+ if (!p)
+ return -ENOMEM;
+
+ x = ioread8(p);
+ y = (x & ~s->mask) | desired_child;
+ if (x != y) {
+ iowrite8((x & ~s->mask) | desired_child, p);
+ pr_debug("%s: %02x -> %02x\n", __func__, x, y);
+ }
+
+ iounmap(p);
+ }
+
+ return 0;
+}
+
+static int mdio_mux_mmioreg_probe(struct platform_device *pdev)
+{
+ struct device_node *np2, *np = pdev->dev.of_node;
+ struct mdio_mux_mmioreg_state *s;
+ struct resource res;
+ const __be32 *iprop;
+ int len, ret;
+
+ dev_dbg(&pdev->dev, "probing node %s\n", np->full_name);
+
+ s = devm_kzalloc(&pdev->dev, sizeof(*s), GFP_KERNEL);
+ if (!s)
+ return -ENOMEM;
+
+ ret = of_address_to_resource(np, 0, &res);
+ if (ret) {
+ dev_err(&pdev->dev, "could not obtain memory map for node %s\n",
+ np->full_name);
+ return ret;
+ }
+ s->phys = res.start;
+
+ if (resource_size(&res) != sizeof(uint8_t)) {
+ dev_err(&pdev->dev, "only 8-bit registers are supported\n");
+ return -EINVAL;
+ }
+
+ iprop = of_get_property(np, "mux-mask", &len);
+ if (!iprop || len != sizeof(uint32_t)) {
+ dev_err(&pdev->dev, "missing or invalid mux-mask property\n");
+ return -ENODEV;
+ }
+ if (be32_to_cpup(iprop) > 255) {
+ dev_err(&pdev->dev, "only 8-bit registers are supported\n");
+ return -EINVAL;
+ }
+ s->mask = be32_to_cpup(iprop);
+
+ /*
+ * Verify that the 'reg' property of each child MDIO bus does not
+ * set any bits outside of the 'mask'.
+ */
+ for_each_available_child_of_node(np, np2) {
+ iprop = of_get_property(np2, "reg", &len);
+ if (!iprop || len != sizeof(uint32_t)) {
+ dev_err(&pdev->dev, "mdio-mux child node %s is "
+ "missing a 'reg' property\n", np2->full_name);
+ return -ENODEV;
+ }
+ if (be32_to_cpup(iprop) & ~s->mask) {
+ dev_err(&pdev->dev, "mdio-mux child node %s has "
+ "a 'reg' value with unmasked bits\n",
+ np2->full_name);
+ return -ENODEV;
+ }
+ }
+
+ ret = mdio_mux_init(&pdev->dev, mdio_mux_mmioreg_switch_fn,
+ &s->mux_handle, s);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register mdio-mux bus %s\n",
+ np->full_name);
+ return ret;
+ }
+
+ pdev->dev.platform_data = s;
+
+ return 0;
+}
+
+static int mdio_mux_mmioreg_remove(struct platform_device *pdev)
+{
+ struct mdio_mux_mmioreg_state *s = dev_get_platdata(&pdev->dev);
+
+ mdio_mux_uninit(s->mux_handle);
+
+ return 0;
+}
+
+static const struct of_device_id mdio_mux_mmioreg_match[] = {
+ {
+ .compatible = "mdio-mux-mmioreg",
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, mdio_mux_mmioreg_match);
+
+static struct platform_driver mdio_mux_mmioreg_driver = {
+ .driver = {
+ .name = "mdio-mux-mmioreg",
+ .of_match_table = mdio_mux_mmioreg_match,
+ },
+ .probe = mdio_mux_mmioreg_probe,
+ .remove = mdio_mux_mmioreg_remove,
+};
+
+module_platform_driver(mdio_mux_mmioreg_driver);
+
+MODULE_AUTHOR("Timur Tabi <timur@freescale.com>");
+MODULE_DESCRIPTION("Memory-mapped device MDIO MUX driver");
+MODULE_LICENSE("GPL v2");
diff --git a/kernel/drivers/net/phy/mdio-mux.c b/kernel/drivers/net/phy/mdio-mux.c
new file mode 100644
index 000000000..4d4d25efc
--- /dev/null
+++ b/kernel/drivers/net/phy/mdio-mux.c
@@ -0,0 +1,198 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2011, 2012 Cavium, Inc.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mdio-mux.h>
+#include <linux/of_mdio.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/phy.h>
+
+#define DRV_VERSION "1.0"
+#define DRV_DESCRIPTION "MDIO bus multiplexer driver"
+
+struct mdio_mux_child_bus;
+
+struct mdio_mux_parent_bus {
+ struct mii_bus *mii_bus;
+ int current_child;
+ int parent_id;
+ void *switch_data;
+ int (*switch_fn)(int current_child, int desired_child, void *data);
+
+ /* List of our children linked through their next fields. */
+ struct mdio_mux_child_bus *children;
+};
+
+struct mdio_mux_child_bus {
+ struct mii_bus *mii_bus;
+ struct mdio_mux_parent_bus *parent;
+ struct mdio_mux_child_bus *next;
+ int bus_number;
+ int phy_irq[PHY_MAX_ADDR];
+};
+
+/*
+ * The parent bus' lock is used to order access to the switch_fn.
+ */
+static int mdio_mux_read(struct mii_bus *bus, int phy_id, int regnum)
+{
+ struct mdio_mux_child_bus *cb = bus->priv;
+ struct mdio_mux_parent_bus *pb = cb->parent;
+ int r;
+
+ /* In theory multiple mdio_mux could be stacked, thus creating
+ * more than a single level of nesting. But in practice,
+ * SINGLE_DEPTH_NESTING will cover the vast majority of use
+ * cases. We use it, instead of trying to handle the general
+ * case.
+ */
+ mutex_lock_nested(&pb->mii_bus->mdio_lock, SINGLE_DEPTH_NESTING);
+ r = pb->switch_fn(pb->current_child, cb->bus_number, pb->switch_data);
+ if (r)
+ goto out;
+
+ pb->current_child = cb->bus_number;
+
+ r = pb->mii_bus->read(pb->mii_bus, phy_id, regnum);
+out:
+ mutex_unlock(&pb->mii_bus->mdio_lock);
+
+ return r;
+}
+
+/*
+ * The parent bus' lock is used to order access to the switch_fn.
+ */
+static int mdio_mux_write(struct mii_bus *bus, int phy_id,
+ int regnum, u16 val)
+{
+ struct mdio_mux_child_bus *cb = bus->priv;
+ struct mdio_mux_parent_bus *pb = cb->parent;
+
+ int r;
+
+ mutex_lock_nested(&pb->mii_bus->mdio_lock, SINGLE_DEPTH_NESTING);
+ r = pb->switch_fn(pb->current_child, cb->bus_number, pb->switch_data);
+ if (r)
+ goto out;
+
+ pb->current_child = cb->bus_number;
+
+ r = pb->mii_bus->write(pb->mii_bus, phy_id, regnum, val);
+out:
+ mutex_unlock(&pb->mii_bus->mdio_lock);
+
+ return r;
+}
+
+static int parent_count;
+
+int mdio_mux_init(struct device *dev,
+ int (*switch_fn)(int cur, int desired, void *data),
+ void **mux_handle,
+ void *data)
+{
+ struct device_node *parent_bus_node;
+ struct device_node *child_bus_node;
+ int r, ret_val;
+ struct mii_bus *parent_bus;
+ struct mdio_mux_parent_bus *pb;
+ struct mdio_mux_child_bus *cb;
+
+ if (!dev->of_node)
+ return -ENODEV;
+
+ parent_bus_node = of_parse_phandle(dev->of_node, "mdio-parent-bus", 0);
+
+ if (!parent_bus_node)
+ return -ENODEV;
+
+ parent_bus = of_mdio_find_bus(parent_bus_node);
+ if (parent_bus == NULL) {
+ ret_val = -EPROBE_DEFER;
+ goto err_parent_bus;
+ }
+
+ pb = devm_kzalloc(dev, sizeof(*pb), GFP_KERNEL);
+ if (pb == NULL) {
+ ret_val = -ENOMEM;
+ goto err_parent_bus;
+ }
+
+ pb->switch_data = data;
+ pb->switch_fn = switch_fn;
+ pb->current_child = -1;
+ pb->parent_id = parent_count++;
+ pb->mii_bus = parent_bus;
+
+ ret_val = -ENODEV;
+ for_each_available_child_of_node(dev->of_node, child_bus_node) {
+ u32 v;
+
+ r = of_property_read_u32(child_bus_node, "reg", &v);
+ if (r)
+ continue;
+
+ cb = devm_kzalloc(dev, sizeof(*cb), GFP_KERNEL);
+ if (cb == NULL) {
+ dev_err(dev,
+ "Error: Failed to allocate memory for child\n");
+ ret_val = -ENOMEM;
+ break;
+ }
+ cb->bus_number = v;
+ cb->parent = pb;
+ cb->mii_bus = mdiobus_alloc();
+ cb->mii_bus->priv = cb;
+
+ cb->mii_bus->irq = cb->phy_irq;
+ cb->mii_bus->name = "mdio_mux";
+ snprintf(cb->mii_bus->id, MII_BUS_ID_SIZE, "%x.%x",
+ pb->parent_id, v);
+ cb->mii_bus->parent = dev;
+ cb->mii_bus->read = mdio_mux_read;
+ cb->mii_bus->write = mdio_mux_write;
+ r = of_mdiobus_register(cb->mii_bus, child_bus_node);
+ if (r) {
+ mdiobus_free(cb->mii_bus);
+ devm_kfree(dev, cb);
+ } else {
+ of_node_get(child_bus_node);
+ cb->next = pb->children;
+ pb->children = cb;
+ }
+ }
+ if (pb->children) {
+ *mux_handle = pb;
+ dev_info(dev, "Version " DRV_VERSION "\n");
+ return 0;
+ }
+err_parent_bus:
+ of_node_put(parent_bus_node);
+ return ret_val;
+}
+EXPORT_SYMBOL_GPL(mdio_mux_init);
+
+void mdio_mux_uninit(void *mux_handle)
+{
+ struct mdio_mux_parent_bus *pb = mux_handle;
+ struct mdio_mux_child_bus *cb = pb->children;
+
+ while (cb) {
+ mdiobus_unregister(cb->mii_bus);
+ mdiobus_free(cb->mii_bus);
+ cb = cb->next;
+ }
+}
+EXPORT_SYMBOL_GPL(mdio_mux_uninit);
+
+MODULE_DESCRIPTION(DRV_DESCRIPTION);
+MODULE_VERSION(DRV_VERSION);
+MODULE_AUTHOR("David Daney");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/net/phy/mdio-octeon.c b/kernel/drivers/net/phy/mdio-octeon.c
new file mode 100644
index 000000000..c838ad615
--- /dev/null
+++ b/kernel/drivers/net/phy/mdio-octeon.c
@@ -0,0 +1,283 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2009-2012 Cavium, Inc.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/of_mdio.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/gfp.h>
+#include <linux/phy.h>
+#include <linux/io.h>
+
+#include <asm/octeon/octeon.h>
+#include <asm/octeon/cvmx-smix-defs.h>
+
+#define DRV_VERSION "1.0"
+#define DRV_DESCRIPTION "Cavium Networks Octeon SMI/MDIO driver"
+
+#define SMI_CMD 0x0
+#define SMI_WR_DAT 0x8
+#define SMI_RD_DAT 0x10
+#define SMI_CLK 0x18
+#define SMI_EN 0x20
+
+enum octeon_mdiobus_mode {
+ UNINIT = 0,
+ C22,
+ C45
+};
+
+struct octeon_mdiobus {
+ struct mii_bus *mii_bus;
+ u64 register_base;
+ resource_size_t mdio_phys;
+ resource_size_t regsize;
+ enum octeon_mdiobus_mode mode;
+ int phy_irq[PHY_MAX_ADDR];
+};
+
+static void octeon_mdiobus_set_mode(struct octeon_mdiobus *p,
+ enum octeon_mdiobus_mode m)
+{
+ union cvmx_smix_clk smi_clk;
+
+ if (m == p->mode)
+ return;
+
+ smi_clk.u64 = cvmx_read_csr(p->register_base + SMI_CLK);
+ smi_clk.s.mode = (m == C45) ? 1 : 0;
+ smi_clk.s.preamble = 1;
+ cvmx_write_csr(p->register_base + SMI_CLK, smi_clk.u64);
+ p->mode = m;
+}
+
+static int octeon_mdiobus_c45_addr(struct octeon_mdiobus *p,
+ int phy_id, int regnum)
+{
+ union cvmx_smix_cmd smi_cmd;
+ union cvmx_smix_wr_dat smi_wr;
+ int timeout = 1000;
+
+ octeon_mdiobus_set_mode(p, C45);
+
+ smi_wr.u64 = 0;
+ smi_wr.s.dat = regnum & 0xffff;
+ cvmx_write_csr(p->register_base + SMI_WR_DAT, smi_wr.u64);
+
+ regnum = (regnum >> 16) & 0x1f;
+
+ smi_cmd.u64 = 0;
+ smi_cmd.s.phy_op = 0; /* MDIO_CLAUSE_45_ADDRESS */
+ smi_cmd.s.phy_adr = phy_id;
+ smi_cmd.s.reg_adr = regnum;
+ cvmx_write_csr(p->register_base + SMI_CMD, smi_cmd.u64);
+
+ do {
+ /* Wait 1000 clocks so we don't saturate the RSL bus
+ * doing reads.
+ */
+ __delay(1000);
+ smi_wr.u64 = cvmx_read_csr(p->register_base + SMI_WR_DAT);
+ } while (smi_wr.s.pending && --timeout);
+
+ if (timeout <= 0)
+ return -EIO;
+ return 0;
+}
+
+static int octeon_mdiobus_read(struct mii_bus *bus, int phy_id, int regnum)
+{
+ struct octeon_mdiobus *p = bus->priv;
+ union cvmx_smix_cmd smi_cmd;
+ union cvmx_smix_rd_dat smi_rd;
+ unsigned int op = 1; /* MDIO_CLAUSE_22_READ */
+ int timeout = 1000;
+
+ if (regnum & MII_ADDR_C45) {
+ int r = octeon_mdiobus_c45_addr(p, phy_id, regnum);
+ if (r < 0)
+ return r;
+
+ regnum = (regnum >> 16) & 0x1f;
+ op = 3; /* MDIO_CLAUSE_45_READ */
+ } else {
+ octeon_mdiobus_set_mode(p, C22);
+ }
+
+
+ smi_cmd.u64 = 0;
+ smi_cmd.s.phy_op = op;
+ smi_cmd.s.phy_adr = phy_id;
+ smi_cmd.s.reg_adr = regnum;
+ cvmx_write_csr(p->register_base + SMI_CMD, smi_cmd.u64);
+
+ do {
+ /* Wait 1000 clocks so we don't saturate the RSL bus
+ * doing reads.
+ */
+ __delay(1000);
+ smi_rd.u64 = cvmx_read_csr(p->register_base + SMI_RD_DAT);
+ } while (smi_rd.s.pending && --timeout);
+
+ if (smi_rd.s.val)
+ return smi_rd.s.dat;
+ else
+ return -EIO;
+}
+
+static int octeon_mdiobus_write(struct mii_bus *bus, int phy_id,
+ int regnum, u16 val)
+{
+ struct octeon_mdiobus *p = bus->priv;
+ union cvmx_smix_cmd smi_cmd;
+ union cvmx_smix_wr_dat smi_wr;
+ unsigned int op = 0; /* MDIO_CLAUSE_22_WRITE */
+ int timeout = 1000;
+
+
+ if (regnum & MII_ADDR_C45) {
+ int r = octeon_mdiobus_c45_addr(p, phy_id, regnum);
+ if (r < 0)
+ return r;
+
+ regnum = (regnum >> 16) & 0x1f;
+ op = 1; /* MDIO_CLAUSE_45_WRITE */
+ } else {
+ octeon_mdiobus_set_mode(p, C22);
+ }
+
+ smi_wr.u64 = 0;
+ smi_wr.s.dat = val;
+ cvmx_write_csr(p->register_base + SMI_WR_DAT, smi_wr.u64);
+
+ smi_cmd.u64 = 0;
+ smi_cmd.s.phy_op = op;
+ smi_cmd.s.phy_adr = phy_id;
+ smi_cmd.s.reg_adr = regnum;
+ cvmx_write_csr(p->register_base + SMI_CMD, smi_cmd.u64);
+
+ do {
+ /* Wait 1000 clocks so we don't saturate the RSL bus
+ * doing reads.
+ */
+ __delay(1000);
+ smi_wr.u64 = cvmx_read_csr(p->register_base + SMI_WR_DAT);
+ } while (smi_wr.s.pending && --timeout);
+
+ if (timeout <= 0)
+ return -EIO;
+
+ return 0;
+}
+
+static int octeon_mdiobus_probe(struct platform_device *pdev)
+{
+ struct octeon_mdiobus *bus;
+ struct resource *res_mem;
+ union cvmx_smix_en smi_en;
+ int err = -ENOENT;
+
+ bus = devm_kzalloc(&pdev->dev, sizeof(*bus), GFP_KERNEL);
+ if (!bus)
+ return -ENOMEM;
+
+ res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+ if (res_mem == NULL) {
+ dev_err(&pdev->dev, "found no memory resource\n");
+ err = -ENXIO;
+ goto fail;
+ }
+ bus->mdio_phys = res_mem->start;
+ bus->regsize = resource_size(res_mem);
+ if (!devm_request_mem_region(&pdev->dev, bus->mdio_phys, bus->regsize,
+ res_mem->name)) {
+ dev_err(&pdev->dev, "request_mem_region failed\n");
+ goto fail;
+ }
+ bus->register_base =
+ (u64)devm_ioremap(&pdev->dev, bus->mdio_phys, bus->regsize);
+
+ bus->mii_bus = mdiobus_alloc();
+
+ if (!bus->mii_bus)
+ goto fail;
+
+ smi_en.u64 = 0;
+ smi_en.s.en = 1;
+ cvmx_write_csr(bus->register_base + SMI_EN, smi_en.u64);
+
+ bus->mii_bus->priv = bus;
+ bus->mii_bus->irq = bus->phy_irq;
+ bus->mii_bus->name = "mdio-octeon";
+ snprintf(bus->mii_bus->id, MII_BUS_ID_SIZE, "%llx", bus->register_base);
+ bus->mii_bus->parent = &pdev->dev;
+
+ bus->mii_bus->read = octeon_mdiobus_read;
+ bus->mii_bus->write = octeon_mdiobus_write;
+
+ platform_set_drvdata(pdev, bus);
+
+ err = of_mdiobus_register(bus->mii_bus, pdev->dev.of_node);
+ if (err)
+ goto fail_register;
+
+ dev_info(&pdev->dev, "Version " DRV_VERSION "\n");
+
+ return 0;
+fail_register:
+ mdiobus_free(bus->mii_bus);
+fail:
+ smi_en.u64 = 0;
+ cvmx_write_csr(bus->register_base + SMI_EN, smi_en.u64);
+ return err;
+}
+
+static int octeon_mdiobus_remove(struct platform_device *pdev)
+{
+ struct octeon_mdiobus *bus;
+ union cvmx_smix_en smi_en;
+
+ bus = platform_get_drvdata(pdev);
+
+ mdiobus_unregister(bus->mii_bus);
+ mdiobus_free(bus->mii_bus);
+ smi_en.u64 = 0;
+ cvmx_write_csr(bus->register_base + SMI_EN, smi_en.u64);
+ return 0;
+}
+
+static const struct of_device_id octeon_mdiobus_match[] = {
+ {
+ .compatible = "cavium,octeon-3860-mdio",
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, octeon_mdiobus_match);
+
+static struct platform_driver octeon_mdiobus_driver = {
+ .driver = {
+ .name = "mdio-octeon",
+ .of_match_table = octeon_mdiobus_match,
+ },
+ .probe = octeon_mdiobus_probe,
+ .remove = octeon_mdiobus_remove,
+};
+
+void octeon_mdiobus_force_mod_depencency(void)
+{
+ /* Let ethernet drivers force us to be loaded. */
+}
+EXPORT_SYMBOL(octeon_mdiobus_force_mod_depencency);
+
+module_platform_driver(octeon_mdiobus_driver);
+
+MODULE_DESCRIPTION(DRV_DESCRIPTION);
+MODULE_VERSION(DRV_VERSION);
+MODULE_AUTHOR("David Daney");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/net/phy/mdio-sun4i.c b/kernel/drivers/net/phy/mdio-sun4i.c
new file mode 100644
index 000000000..15bc7f9ea
--- /dev/null
+++ b/kernel/drivers/net/phy/mdio-sun4i.c
@@ -0,0 +1,188 @@
+/*
+ * Allwinner EMAC MDIO interface driver
+ *
+ * Copyright 2012-2013 Stefan Roese <sr@denx.de>
+ * Copyright 2013 Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * Based on the Linux driver provided by Allwinner:
+ * Copyright (C) 1997 Sten Wang
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_address.h>
+#include <linux/of_mdio.h>
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+
+#define EMAC_MAC_MCMD_REG (0x00)
+#define EMAC_MAC_MADR_REG (0x04)
+#define EMAC_MAC_MWTD_REG (0x08)
+#define EMAC_MAC_MRDD_REG (0x0c)
+#define EMAC_MAC_MIND_REG (0x10)
+#define EMAC_MAC_SSRR_REG (0x14)
+
+#define MDIO_TIMEOUT (msecs_to_jiffies(100))
+
+struct sun4i_mdio_data {
+ void __iomem *membase;
+ struct regulator *regulator;
+};
+
+static int sun4i_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
+{
+ struct sun4i_mdio_data *data = bus->priv;
+ unsigned long timeout_jiffies;
+ int value;
+
+ /* issue the phy address and reg */
+ writel((mii_id << 8) | regnum, data->membase + EMAC_MAC_MADR_REG);
+ /* pull up the phy io line */
+ writel(0x1, data->membase + EMAC_MAC_MCMD_REG);
+
+ /* Wait read complete */
+ timeout_jiffies = jiffies + MDIO_TIMEOUT;
+ while (readl(data->membase + EMAC_MAC_MIND_REG) & 0x1) {
+ if (time_is_before_jiffies(timeout_jiffies))
+ return -ETIMEDOUT;
+ msleep(1);
+ }
+
+ /* push down the phy io line */
+ writel(0x0, data->membase + EMAC_MAC_MCMD_REG);
+ /* and read data */
+ value = readl(data->membase + EMAC_MAC_MRDD_REG);
+
+ return value;
+}
+
+static int sun4i_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
+ u16 value)
+{
+ struct sun4i_mdio_data *data = bus->priv;
+ unsigned long timeout_jiffies;
+
+ /* issue the phy address and reg */
+ writel((mii_id << 8) | regnum, data->membase + EMAC_MAC_MADR_REG);
+ /* pull up the phy io line */
+ writel(0x1, data->membase + EMAC_MAC_MCMD_REG);
+
+ /* Wait read complete */
+ timeout_jiffies = jiffies + MDIO_TIMEOUT;
+ while (readl(data->membase + EMAC_MAC_MIND_REG) & 0x1) {
+ if (time_is_before_jiffies(timeout_jiffies))
+ return -ETIMEDOUT;
+ msleep(1);
+ }
+
+ /* push down the phy io line */
+ writel(0x0, data->membase + EMAC_MAC_MCMD_REG);
+ /* and write data */
+ writel(value, data->membase + EMAC_MAC_MWTD_REG);
+
+ return 0;
+}
+
+static int sun4i_mdio_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct mii_bus *bus;
+ struct sun4i_mdio_data *data;
+ struct resource *res;
+ int ret, i;
+
+ bus = mdiobus_alloc_size(sizeof(*data));
+ if (!bus)
+ return -ENOMEM;
+
+ bus->name = "sun4i_mii_bus";
+ bus->read = &sun4i_mdio_read;
+ bus->write = &sun4i_mdio_write;
+ snprintf(bus->id, MII_BUS_ID_SIZE, "%s-mii", dev_name(&pdev->dev));
+ bus->parent = &pdev->dev;
+
+ bus->irq = devm_kzalloc(&pdev->dev, sizeof(int) * PHY_MAX_ADDR,
+ GFP_KERNEL);
+ if (!bus->irq) {
+ ret = -ENOMEM;
+ goto err_out_free_mdiobus;
+ }
+
+ for (i = 0; i < PHY_MAX_ADDR; i++)
+ bus->irq[i] = PHY_POLL;
+
+ data = bus->priv;
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ data->membase = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(data->membase)) {
+ ret = PTR_ERR(data->membase);
+ goto err_out_free_mdiobus;
+ }
+
+ data->regulator = devm_regulator_get(&pdev->dev, "phy");
+ if (IS_ERR(data->regulator)) {
+ if (PTR_ERR(data->regulator) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+
+ dev_info(&pdev->dev, "no regulator found\n");
+ } else {
+ ret = regulator_enable(data->regulator);
+ if (ret)
+ goto err_out_free_mdiobus;
+ }
+
+ ret = of_mdiobus_register(bus, np);
+ if (ret < 0)
+ goto err_out_disable_regulator;
+
+ platform_set_drvdata(pdev, bus);
+
+ return 0;
+
+err_out_disable_regulator:
+ regulator_disable(data->regulator);
+err_out_free_mdiobus:
+ mdiobus_free(bus);
+ return ret;
+}
+
+static int sun4i_mdio_remove(struct platform_device *pdev)
+{
+ struct mii_bus *bus = platform_get_drvdata(pdev);
+
+ mdiobus_unregister(bus);
+ mdiobus_free(bus);
+
+ return 0;
+}
+
+static const struct of_device_id sun4i_mdio_dt_ids[] = {
+ { .compatible = "allwinner,sun4i-a10-mdio" },
+
+ /* Deprecated */
+ { .compatible = "allwinner,sun4i-mdio" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, sun4i_mdio_dt_ids);
+
+static struct platform_driver sun4i_mdio_driver = {
+ .probe = sun4i_mdio_probe,
+ .remove = sun4i_mdio_remove,
+ .driver = {
+ .name = "sun4i-mdio",
+ .of_match_table = sun4i_mdio_dt_ids,
+ },
+};
+
+module_platform_driver(sun4i_mdio_driver);
+
+MODULE_DESCRIPTION("Allwinner EMAC MDIO interface driver");
+MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/net/phy/mdio_bus.c b/kernel/drivers/net/phy/mdio_bus.c
new file mode 100644
index 000000000..095ef3fe3
--- /dev/null
+++ b/kernel/drivers/net/phy/mdio_bus.c
@@ -0,0 +1,612 @@
+/* MDIO Bus interface
+ *
+ * Author: Andy Fleming
+ *
+ * Copyright (c) 2004 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/unistd.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/of_device.h>
+#include <linux/of_mdio.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+
+#include <asm/irq.h>
+
+/**
+ * mdiobus_alloc_size - allocate a mii_bus structure
+ * @size: extra amount of memory to allocate for private storage.
+ * If non-zero, then bus->priv is points to that memory.
+ *
+ * Description: called by a bus driver to allocate an mii_bus
+ * structure to fill in.
+ */
+struct mii_bus *mdiobus_alloc_size(size_t size)
+{
+ struct mii_bus *bus;
+ size_t aligned_size = ALIGN(sizeof(*bus), NETDEV_ALIGN);
+ size_t alloc_size;
+
+ /* If we alloc extra space, it should be aligned */
+ if (size)
+ alloc_size = aligned_size + size;
+ else
+ alloc_size = sizeof(*bus);
+
+ bus = kzalloc(alloc_size, GFP_KERNEL);
+ if (bus) {
+ bus->state = MDIOBUS_ALLOCATED;
+ if (size)
+ bus->priv = (void *)bus + aligned_size;
+ }
+
+ return bus;
+}
+EXPORT_SYMBOL(mdiobus_alloc_size);
+
+static void _devm_mdiobus_free(struct device *dev, void *res)
+{
+ mdiobus_free(*(struct mii_bus **)res);
+}
+
+static int devm_mdiobus_match(struct device *dev, void *res, void *data)
+{
+ struct mii_bus **r = res;
+
+ if (WARN_ON(!r || !*r))
+ return 0;
+
+ return *r == data;
+}
+
+/**
+ * devm_mdiobus_alloc_size - Resource-managed mdiobus_alloc_size()
+ * @dev: Device to allocate mii_bus for
+ * @sizeof_priv: Space to allocate for private structure.
+ *
+ * Managed mdiobus_alloc_size. mii_bus allocated with this function is
+ * automatically freed on driver detach.
+ *
+ * If an mii_bus allocated with this function needs to be freed separately,
+ * devm_mdiobus_free() must be used.
+ *
+ * RETURNS:
+ * Pointer to allocated mii_bus on success, NULL on failure.
+ */
+struct mii_bus *devm_mdiobus_alloc_size(struct device *dev, int sizeof_priv)
+{
+ struct mii_bus **ptr, *bus;
+
+ ptr = devres_alloc(_devm_mdiobus_free, sizeof(*ptr), GFP_KERNEL);
+ if (!ptr)
+ return NULL;
+
+ /* use raw alloc_dr for kmalloc caller tracing */
+ bus = mdiobus_alloc_size(sizeof_priv);
+ if (bus) {
+ *ptr = bus;
+ devres_add(dev, ptr);
+ } else {
+ devres_free(ptr);
+ }
+
+ return bus;
+}
+EXPORT_SYMBOL_GPL(devm_mdiobus_alloc_size);
+
+/**
+ * devm_mdiobus_free - Resource-managed mdiobus_free()
+ * @dev: Device this mii_bus belongs to
+ * @bus: the mii_bus associated with the device
+ *
+ * Free mii_bus allocated with devm_mdiobus_alloc_size().
+ */
+void devm_mdiobus_free(struct device *dev, struct mii_bus *bus)
+{
+ int rc;
+
+ rc = devres_release(dev, _devm_mdiobus_free,
+ devm_mdiobus_match, bus);
+ WARN_ON(rc);
+}
+EXPORT_SYMBOL_GPL(devm_mdiobus_free);
+
+/**
+ * mdiobus_release - mii_bus device release callback
+ * @d: the target struct device that contains the mii_bus
+ *
+ * Description: called when the last reference to an mii_bus is
+ * dropped, to free the underlying memory.
+ */
+static void mdiobus_release(struct device *d)
+{
+ struct mii_bus *bus = to_mii_bus(d);
+ BUG_ON(bus->state != MDIOBUS_RELEASED &&
+ /* for compatibility with error handling in drivers */
+ bus->state != MDIOBUS_ALLOCATED);
+ kfree(bus);
+}
+
+static struct class mdio_bus_class = {
+ .name = "mdio_bus",
+ .dev_release = mdiobus_release,
+};
+
+#if IS_ENABLED(CONFIG_OF_MDIO)
+/* Helper function for of_mdio_find_bus */
+static int of_mdio_bus_match(struct device *dev, const void *mdio_bus_np)
+{
+ return dev->of_node == mdio_bus_np;
+}
+/**
+ * of_mdio_find_bus - Given an mii_bus node, find the mii_bus.
+ * @mdio_bus_np: Pointer to the mii_bus.
+ *
+ * Returns a pointer to the mii_bus, or NULL if none found.
+ *
+ * Because the association of a device_node and mii_bus is made via
+ * of_mdiobus_register(), the mii_bus cannot be found before it is
+ * registered with of_mdiobus_register().
+ *
+ */
+struct mii_bus *of_mdio_find_bus(struct device_node *mdio_bus_np)
+{
+ struct device *d;
+
+ if (!mdio_bus_np)
+ return NULL;
+
+ d = class_find_device(&mdio_bus_class, NULL, mdio_bus_np,
+ of_mdio_bus_match);
+
+ return d ? to_mii_bus(d) : NULL;
+}
+EXPORT_SYMBOL(of_mdio_find_bus);
+
+/* Walk the list of subnodes of a mdio bus and look for a node that matches the
+ * phy's address with its 'reg' property. If found, set the of_node pointer for
+ * the phy. This allows auto-probed pyh devices to be supplied with information
+ * passed in via DT.
+ */
+static void of_mdiobus_link_phydev(struct mii_bus *mdio,
+ struct phy_device *phydev)
+{
+ struct device *dev = &phydev->dev;
+ struct device_node *child;
+
+ if (dev->of_node || !mdio->dev.of_node)
+ return;
+
+ for_each_available_child_of_node(mdio->dev.of_node, child) {
+ int addr;
+ int ret;
+
+ ret = of_property_read_u32(child, "reg", &addr);
+ if (ret < 0) {
+ dev_err(dev, "%s has invalid PHY address\n",
+ child->full_name);
+ continue;
+ }
+
+ /* A PHY must have a reg property in the range [0-31] */
+ if (addr >= PHY_MAX_ADDR) {
+ dev_err(dev, "%s PHY address %i is too large\n",
+ child->full_name, addr);
+ continue;
+ }
+
+ if (addr == phydev->addr) {
+ dev->of_node = child;
+ return;
+ }
+ }
+}
+#else /* !IS_ENABLED(CONFIG_OF_MDIO) */
+static inline void of_mdiobus_link_phydev(struct mii_bus *mdio,
+ struct phy_device *phydev)
+{
+}
+#endif
+
+/**
+ * mdiobus_register - bring up all the PHYs on a given bus and attach them to bus
+ * @bus: target mii_bus
+ *
+ * Description: Called by a bus driver to bring up all the PHYs
+ * on a given bus, and attach them to the bus.
+ *
+ * Returns 0 on success or < 0 on error.
+ */
+int mdiobus_register(struct mii_bus *bus)
+{
+ int i, err;
+
+ if (NULL == bus || NULL == bus->name ||
+ NULL == bus->read || NULL == bus->write)
+ return -EINVAL;
+
+ BUG_ON(bus->state != MDIOBUS_ALLOCATED &&
+ bus->state != MDIOBUS_UNREGISTERED);
+
+ bus->dev.parent = bus->parent;
+ bus->dev.class = &mdio_bus_class;
+ bus->dev.groups = NULL;
+ dev_set_name(&bus->dev, "%s", bus->id);
+
+ err = device_register(&bus->dev);
+ if (err) {
+ pr_err("mii_bus %s failed to register\n", bus->id);
+ put_device(&bus->dev);
+ return -EINVAL;
+ }
+
+ mutex_init(&bus->mdio_lock);
+
+ if (bus->reset)
+ bus->reset(bus);
+
+ for (i = 0; i < PHY_MAX_ADDR; i++) {
+ if ((bus->phy_mask & (1 << i)) == 0) {
+ struct phy_device *phydev;
+
+ phydev = mdiobus_scan(bus, i);
+ if (IS_ERR(phydev)) {
+ err = PTR_ERR(phydev);
+ goto error;
+ }
+ }
+ }
+
+ bus->state = MDIOBUS_REGISTERED;
+ pr_info("%s: probed\n", bus->name);
+ return 0;
+
+error:
+ while (--i >= 0) {
+ if (bus->phy_map[i])
+ device_unregister(&bus->phy_map[i]->dev);
+ }
+ device_del(&bus->dev);
+ return err;
+}
+EXPORT_SYMBOL(mdiobus_register);
+
+void mdiobus_unregister(struct mii_bus *bus)
+{
+ int i;
+
+ BUG_ON(bus->state != MDIOBUS_REGISTERED);
+ bus->state = MDIOBUS_UNREGISTERED;
+
+ device_del(&bus->dev);
+ for (i = 0; i < PHY_MAX_ADDR; i++) {
+ if (bus->phy_map[i])
+ device_unregister(&bus->phy_map[i]->dev);
+ bus->phy_map[i] = NULL;
+ }
+}
+EXPORT_SYMBOL(mdiobus_unregister);
+
+/**
+ * mdiobus_free - free a struct mii_bus
+ * @bus: mii_bus to free
+ *
+ * This function releases the reference to the underlying device
+ * object in the mii_bus. If this is the last reference, the mii_bus
+ * will be freed.
+ */
+void mdiobus_free(struct mii_bus *bus)
+{
+ /* For compatibility with error handling in drivers. */
+ if (bus->state == MDIOBUS_ALLOCATED) {
+ kfree(bus);
+ return;
+ }
+
+ BUG_ON(bus->state != MDIOBUS_UNREGISTERED);
+ bus->state = MDIOBUS_RELEASED;
+
+ put_device(&bus->dev);
+}
+EXPORT_SYMBOL(mdiobus_free);
+
+struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr)
+{
+ struct phy_device *phydev;
+ int err;
+
+ phydev = get_phy_device(bus, addr, false);
+ if (IS_ERR(phydev) || phydev == NULL)
+ return phydev;
+
+ /*
+ * For DT, see if the auto-probed phy has a correspoding child
+ * in the bus node, and set the of_node pointer in this case.
+ */
+ of_mdiobus_link_phydev(bus, phydev);
+
+ err = phy_device_register(phydev);
+ if (err) {
+ phy_device_free(phydev);
+ return NULL;
+ }
+
+ return phydev;
+}
+EXPORT_SYMBOL(mdiobus_scan);
+
+/**
+ * mdiobus_read - Convenience function for reading a given MII mgmt register
+ * @bus: the mii_bus struct
+ * @addr: the phy address
+ * @regnum: register number to read
+ *
+ * NOTE: MUST NOT be called from interrupt context,
+ * because the bus read/write functions may wait for an interrupt
+ * to conclude the operation.
+ */
+int mdiobus_read(struct mii_bus *bus, int addr, u32 regnum)
+{
+ int retval;
+
+ BUG_ON(in_interrupt());
+
+ mutex_lock(&bus->mdio_lock);
+ retval = bus->read(bus, addr, regnum);
+ mutex_unlock(&bus->mdio_lock);
+
+ return retval;
+}
+EXPORT_SYMBOL(mdiobus_read);
+
+/**
+ * mdiobus_write - Convenience function for writing a given MII mgmt register
+ * @bus: the mii_bus struct
+ * @addr: the phy address
+ * @regnum: register number to write
+ * @val: value to write to @regnum
+ *
+ * NOTE: MUST NOT be called from interrupt context,
+ * because the bus read/write functions may wait for an interrupt
+ * to conclude the operation.
+ */
+int mdiobus_write(struct mii_bus *bus, int addr, u32 regnum, u16 val)
+{
+ int err;
+
+ BUG_ON(in_interrupt());
+
+ mutex_lock(&bus->mdio_lock);
+ err = bus->write(bus, addr, regnum, val);
+ mutex_unlock(&bus->mdio_lock);
+
+ return err;
+}
+EXPORT_SYMBOL(mdiobus_write);
+
+/**
+ * mdio_bus_match - determine if given PHY driver supports the given PHY device
+ * @dev: target PHY device
+ * @drv: given PHY driver
+ *
+ * Description: Given a PHY device, and a PHY driver, return 1 if
+ * the driver supports the device. Otherwise, return 0.
+ */
+static int mdio_bus_match(struct device *dev, struct device_driver *drv)
+{
+ struct phy_device *phydev = to_phy_device(dev);
+ struct phy_driver *phydrv = to_phy_driver(drv);
+
+ if (of_driver_match_device(dev, drv))
+ return 1;
+
+ if (phydrv->match_phy_device)
+ return phydrv->match_phy_device(phydev);
+
+ return (phydrv->phy_id & phydrv->phy_id_mask) ==
+ (phydev->phy_id & phydrv->phy_id_mask);
+}
+
+#ifdef CONFIG_PM
+
+static bool mdio_bus_phy_may_suspend(struct phy_device *phydev)
+{
+ struct device_driver *drv = phydev->dev.driver;
+ struct phy_driver *phydrv = to_phy_driver(drv);
+ struct net_device *netdev = phydev->attached_dev;
+
+ if (!drv || !phydrv->suspend)
+ return false;
+
+ /* PHY not attached? May suspend if the PHY has not already been
+ * suspended as part of a prior call to phy_disconnect() ->
+ * phy_detach() -> phy_suspend() because the parent netdev might be the
+ * MDIO bus driver and clock gated at this point.
+ */
+ if (!netdev)
+ return !phydev->suspended;
+
+ /* Don't suspend PHY if the attched netdev parent may wakeup.
+ * The parent may point to a PCI device, as in tg3 driver.
+ */
+ if (netdev->dev.parent && device_may_wakeup(netdev->dev.parent))
+ return false;
+
+ /* Also don't suspend PHY if the netdev itself may wakeup. This
+ * is the case for devices w/o underlaying pwr. mgmt. aware bus,
+ * e.g. SoC devices.
+ */
+ if (device_may_wakeup(&netdev->dev))
+ return false;
+
+ return true;
+}
+
+static int mdio_bus_suspend(struct device *dev)
+{
+ struct phy_device *phydev = to_phy_device(dev);
+
+ /* We must stop the state machine manually, otherwise it stops out of
+ * control, possibly with the phydev->lock held. Upon resume, netdev
+ * may call phy routines that try to grab the same lock, and that may
+ * lead to a deadlock.
+ */
+ if (phydev->attached_dev && phydev->adjust_link)
+ phy_stop_machine(phydev);
+
+ if (!mdio_bus_phy_may_suspend(phydev))
+ return 0;
+
+ return phy_suspend(phydev);
+}
+
+static int mdio_bus_resume(struct device *dev)
+{
+ struct phy_device *phydev = to_phy_device(dev);
+ int ret;
+
+ if (!mdio_bus_phy_may_suspend(phydev))
+ goto no_resume;
+
+ ret = phy_resume(phydev);
+ if (ret < 0)
+ return ret;
+
+no_resume:
+ if (phydev->attached_dev && phydev->adjust_link)
+ phy_start_machine(phydev);
+
+ return 0;
+}
+
+static int mdio_bus_restore(struct device *dev)
+{
+ struct phy_device *phydev = to_phy_device(dev);
+ struct net_device *netdev = phydev->attached_dev;
+ int ret;
+
+ if (!netdev)
+ return 0;
+
+ ret = phy_init_hw(phydev);
+ if (ret < 0)
+ return ret;
+
+ /* The PHY needs to renegotiate. */
+ phydev->link = 0;
+ phydev->state = PHY_UP;
+
+ phy_start_machine(phydev);
+
+ return 0;
+}
+
+static const struct dev_pm_ops mdio_bus_pm_ops = {
+ .suspend = mdio_bus_suspend,
+ .resume = mdio_bus_resume,
+ .freeze = mdio_bus_suspend,
+ .thaw = mdio_bus_resume,
+ .restore = mdio_bus_restore,
+};
+
+#define MDIO_BUS_PM_OPS (&mdio_bus_pm_ops)
+
+#else
+
+#define MDIO_BUS_PM_OPS NULL
+
+#endif /* CONFIG_PM */
+
+static ssize_t
+phy_id_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct phy_device *phydev = to_phy_device(dev);
+
+ return sprintf(buf, "0x%.8lx\n", (unsigned long)phydev->phy_id);
+}
+static DEVICE_ATTR_RO(phy_id);
+
+static ssize_t
+phy_interface_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct phy_device *phydev = to_phy_device(dev);
+ const char *mode = NULL;
+
+ if (phy_is_internal(phydev))
+ mode = "internal";
+ else
+ mode = phy_modes(phydev->interface);
+
+ return sprintf(buf, "%s\n", mode);
+}
+static DEVICE_ATTR_RO(phy_interface);
+
+static ssize_t
+phy_has_fixups_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct phy_device *phydev = to_phy_device(dev);
+
+ return sprintf(buf, "%d\n", phydev->has_fixups);
+}
+static DEVICE_ATTR_RO(phy_has_fixups);
+
+static struct attribute *mdio_dev_attrs[] = {
+ &dev_attr_phy_id.attr,
+ &dev_attr_phy_interface.attr,
+ &dev_attr_phy_has_fixups.attr,
+ NULL,
+};
+ATTRIBUTE_GROUPS(mdio_dev);
+
+struct bus_type mdio_bus_type = {
+ .name = "mdio_bus",
+ .match = mdio_bus_match,
+ .pm = MDIO_BUS_PM_OPS,
+ .dev_groups = mdio_dev_groups,
+};
+EXPORT_SYMBOL(mdio_bus_type);
+
+int __init mdio_bus_init(void)
+{
+ int ret;
+
+ ret = class_register(&mdio_bus_class);
+ if (!ret) {
+ ret = bus_register(&mdio_bus_type);
+ if (ret)
+ class_unregister(&mdio_bus_class);
+ }
+
+ return ret;
+}
+
+void mdio_bus_exit(void)
+{
+ class_unregister(&mdio_bus_class);
+ bus_unregister(&mdio_bus_type);
+}
diff --git a/kernel/drivers/net/phy/micrel.c b/kernel/drivers/net/phy/micrel.c
new file mode 100644
index 000000000..ebdc357c5
--- /dev/null
+++ b/kernel/drivers/net/phy/micrel.c
@@ -0,0 +1,806 @@
+/*
+ * drivers/net/phy/micrel.c
+ *
+ * Driver for Micrel PHYs
+ *
+ * Author: David J. Choi
+ *
+ * Copyright (c) 2010-2013 Micrel, Inc.
+ * Copyright (c) 2014 Johan Hovold <johan@kernel.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * Support : Micrel Phys:
+ * Giga phys: ksz9021, ksz9031
+ * 100/10 Phys : ksz8001, ksz8721, ksz8737, ksz8041
+ * ksz8021, ksz8031, ksz8051,
+ * ksz8081, ksz8091,
+ * ksz8061,
+ * Switch : ksz8873, ksz886x
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/phy.h>
+#include <linux/micrel_phy.h>
+#include <linux/of.h>
+#include <linux/clk.h>
+
+/* Operation Mode Strap Override */
+#define MII_KSZPHY_OMSO 0x16
+#define KSZPHY_OMSO_B_CAST_OFF BIT(9)
+#define KSZPHY_OMSO_NAND_TREE_ON BIT(5)
+#define KSZPHY_OMSO_RMII_OVERRIDE BIT(1)
+#define KSZPHY_OMSO_MII_OVERRIDE BIT(0)
+
+/* general Interrupt control/status reg in vendor specific block. */
+#define MII_KSZPHY_INTCS 0x1B
+#define KSZPHY_INTCS_JABBER BIT(15)
+#define KSZPHY_INTCS_RECEIVE_ERR BIT(14)
+#define KSZPHY_INTCS_PAGE_RECEIVE BIT(13)
+#define KSZPHY_INTCS_PARELLEL BIT(12)
+#define KSZPHY_INTCS_LINK_PARTNER_ACK BIT(11)
+#define KSZPHY_INTCS_LINK_DOWN BIT(10)
+#define KSZPHY_INTCS_REMOTE_FAULT BIT(9)
+#define KSZPHY_INTCS_LINK_UP BIT(8)
+#define KSZPHY_INTCS_ALL (KSZPHY_INTCS_LINK_UP |\
+ KSZPHY_INTCS_LINK_DOWN)
+
+/* PHY Control 1 */
+#define MII_KSZPHY_CTRL_1 0x1e
+
+/* PHY Control 2 / PHY Control (if no PHY Control 1) */
+#define MII_KSZPHY_CTRL_2 0x1f
+#define MII_KSZPHY_CTRL MII_KSZPHY_CTRL_2
+/* bitmap of PHY register to set interrupt mode */
+#define KSZPHY_CTRL_INT_ACTIVE_HIGH BIT(9)
+#define KSZPHY_RMII_REF_CLK_SEL BIT(7)
+
+/* Write/read to/from extended registers */
+#define MII_KSZPHY_EXTREG 0x0b
+#define KSZPHY_EXTREG_WRITE 0x8000
+
+#define MII_KSZPHY_EXTREG_WRITE 0x0c
+#define MII_KSZPHY_EXTREG_READ 0x0d
+
+/* Extended registers */
+#define MII_KSZPHY_CLK_CONTROL_PAD_SKEW 0x104
+#define MII_KSZPHY_RX_DATA_PAD_SKEW 0x105
+#define MII_KSZPHY_TX_DATA_PAD_SKEW 0x106
+
+#define PS_TO_REG 200
+
+struct kszphy_type {
+ u32 led_mode_reg;
+ u16 interrupt_level_mask;
+ bool has_broadcast_disable;
+ bool has_nand_tree_disable;
+ bool has_rmii_ref_clk_sel;
+};
+
+struct kszphy_priv {
+ const struct kszphy_type *type;
+ int led_mode;
+ bool rmii_ref_clk_sel;
+ bool rmii_ref_clk_sel_val;
+};
+
+static const struct kszphy_type ksz8021_type = {
+ .led_mode_reg = MII_KSZPHY_CTRL_2,
+ .has_broadcast_disable = true,
+ .has_nand_tree_disable = true,
+ .has_rmii_ref_clk_sel = true,
+};
+
+static const struct kszphy_type ksz8041_type = {
+ .led_mode_reg = MII_KSZPHY_CTRL_1,
+};
+
+static const struct kszphy_type ksz8051_type = {
+ .led_mode_reg = MII_KSZPHY_CTRL_2,
+ .has_nand_tree_disable = true,
+};
+
+static const struct kszphy_type ksz8081_type = {
+ .led_mode_reg = MII_KSZPHY_CTRL_2,
+ .has_broadcast_disable = true,
+ .has_nand_tree_disable = true,
+ .has_rmii_ref_clk_sel = true,
+};
+
+static const struct kszphy_type ks8737_type = {
+ .interrupt_level_mask = BIT(14),
+};
+
+static const struct kszphy_type ksz9021_type = {
+ .interrupt_level_mask = BIT(14),
+};
+
+static int kszphy_extended_write(struct phy_device *phydev,
+ u32 regnum, u16 val)
+{
+ phy_write(phydev, MII_KSZPHY_EXTREG, KSZPHY_EXTREG_WRITE | regnum);
+ return phy_write(phydev, MII_KSZPHY_EXTREG_WRITE, val);
+}
+
+static int kszphy_extended_read(struct phy_device *phydev,
+ u32 regnum)
+{
+ phy_write(phydev, MII_KSZPHY_EXTREG, regnum);
+ return phy_read(phydev, MII_KSZPHY_EXTREG_READ);
+}
+
+static int kszphy_ack_interrupt(struct phy_device *phydev)
+{
+ /* bit[7..0] int status, which is a read and clear register. */
+ int rc;
+
+ rc = phy_read(phydev, MII_KSZPHY_INTCS);
+
+ return (rc < 0) ? rc : 0;
+}
+
+static int kszphy_config_intr(struct phy_device *phydev)
+{
+ const struct kszphy_type *type = phydev->drv->driver_data;
+ int temp;
+ u16 mask;
+
+ if (type && type->interrupt_level_mask)
+ mask = type->interrupt_level_mask;
+ else
+ mask = KSZPHY_CTRL_INT_ACTIVE_HIGH;
+
+ /* set the interrupt pin active low */
+ temp = phy_read(phydev, MII_KSZPHY_CTRL);
+ if (temp < 0)
+ return temp;
+ temp &= ~mask;
+ phy_write(phydev, MII_KSZPHY_CTRL, temp);
+
+ /* enable / disable interrupts */
+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+ temp = KSZPHY_INTCS_ALL;
+ else
+ temp = 0;
+
+ return phy_write(phydev, MII_KSZPHY_INTCS, temp);
+}
+
+static int kszphy_rmii_clk_sel(struct phy_device *phydev, bool val)
+{
+ int ctrl;
+
+ ctrl = phy_read(phydev, MII_KSZPHY_CTRL);
+ if (ctrl < 0)
+ return ctrl;
+
+ if (val)
+ ctrl |= KSZPHY_RMII_REF_CLK_SEL;
+ else
+ ctrl &= ~KSZPHY_RMII_REF_CLK_SEL;
+
+ return phy_write(phydev, MII_KSZPHY_CTRL, ctrl);
+}
+
+static int kszphy_setup_led(struct phy_device *phydev, u32 reg, int val)
+{
+ int rc, temp, shift;
+
+ switch (reg) {
+ case MII_KSZPHY_CTRL_1:
+ shift = 14;
+ break;
+ case MII_KSZPHY_CTRL_2:
+ shift = 4;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ temp = phy_read(phydev, reg);
+ if (temp < 0) {
+ rc = temp;
+ goto out;
+ }
+
+ temp &= ~(3 << shift);
+ temp |= val << shift;
+ rc = phy_write(phydev, reg, temp);
+out:
+ if (rc < 0)
+ dev_err(&phydev->dev, "failed to set led mode\n");
+
+ return rc;
+}
+
+/* Disable PHY address 0 as the broadcast address, so that it can be used as a
+ * unique (non-broadcast) address on a shared bus.
+ */
+static int kszphy_broadcast_disable(struct phy_device *phydev)
+{
+ int ret;
+
+ ret = phy_read(phydev, MII_KSZPHY_OMSO);
+ if (ret < 0)
+ goto out;
+
+ ret = phy_write(phydev, MII_KSZPHY_OMSO, ret | KSZPHY_OMSO_B_CAST_OFF);
+out:
+ if (ret)
+ dev_err(&phydev->dev, "failed to disable broadcast address\n");
+
+ return ret;
+}
+
+static int kszphy_nand_tree_disable(struct phy_device *phydev)
+{
+ int ret;
+
+ ret = phy_read(phydev, MII_KSZPHY_OMSO);
+ if (ret < 0)
+ goto out;
+
+ if (!(ret & KSZPHY_OMSO_NAND_TREE_ON))
+ return 0;
+
+ ret = phy_write(phydev, MII_KSZPHY_OMSO,
+ ret & ~KSZPHY_OMSO_NAND_TREE_ON);
+out:
+ if (ret)
+ dev_err(&phydev->dev, "failed to disable NAND tree mode\n");
+
+ return ret;
+}
+
+static int kszphy_config_init(struct phy_device *phydev)
+{
+ struct kszphy_priv *priv = phydev->priv;
+ const struct kszphy_type *type;
+ int ret;
+
+ if (!priv)
+ return 0;
+
+ type = priv->type;
+
+ if (type->has_broadcast_disable)
+ kszphy_broadcast_disable(phydev);
+
+ if (type->has_nand_tree_disable)
+ kszphy_nand_tree_disable(phydev);
+
+ if (priv->rmii_ref_clk_sel) {
+ ret = kszphy_rmii_clk_sel(phydev, priv->rmii_ref_clk_sel_val);
+ if (ret) {
+ dev_err(&phydev->dev, "failed to set rmii reference clock\n");
+ return ret;
+ }
+ }
+
+ if (priv->led_mode >= 0)
+ kszphy_setup_led(phydev, type->led_mode_reg, priv->led_mode);
+
+ return 0;
+}
+
+static int ksz9021_load_values_from_of(struct phy_device *phydev,
+ struct device_node *of_node, u16 reg,
+ char *field1, char *field2,
+ char *field3, char *field4)
+{
+ int val1 = -1;
+ int val2 = -2;
+ int val3 = -3;
+ int val4 = -4;
+ int newval;
+ int matches = 0;
+
+ if (!of_property_read_u32(of_node, field1, &val1))
+ matches++;
+
+ if (!of_property_read_u32(of_node, field2, &val2))
+ matches++;
+
+ if (!of_property_read_u32(of_node, field3, &val3))
+ matches++;
+
+ if (!of_property_read_u32(of_node, field4, &val4))
+ matches++;
+
+ if (!matches)
+ return 0;
+
+ if (matches < 4)
+ newval = kszphy_extended_read(phydev, reg);
+ else
+ newval = 0;
+
+ if (val1 != -1)
+ newval = ((newval & 0xfff0) | ((val1 / PS_TO_REG) & 0xf) << 0);
+
+ if (val2 != -2)
+ newval = ((newval & 0xff0f) | ((val2 / PS_TO_REG) & 0xf) << 4);
+
+ if (val3 != -3)
+ newval = ((newval & 0xf0ff) | ((val3 / PS_TO_REG) & 0xf) << 8);
+
+ if (val4 != -4)
+ newval = ((newval & 0x0fff) | ((val4 / PS_TO_REG) & 0xf) << 12);
+
+ return kszphy_extended_write(phydev, reg, newval);
+}
+
+static int ksz9021_config_init(struct phy_device *phydev)
+{
+ struct device *dev = &phydev->dev;
+ struct device_node *of_node = dev->of_node;
+
+ if (!of_node && dev->parent->of_node)
+ of_node = dev->parent->of_node;
+
+ if (of_node) {
+ ksz9021_load_values_from_of(phydev, of_node,
+ MII_KSZPHY_CLK_CONTROL_PAD_SKEW,
+ "txen-skew-ps", "txc-skew-ps",
+ "rxdv-skew-ps", "rxc-skew-ps");
+ ksz9021_load_values_from_of(phydev, of_node,
+ MII_KSZPHY_RX_DATA_PAD_SKEW,
+ "rxd0-skew-ps", "rxd1-skew-ps",
+ "rxd2-skew-ps", "rxd3-skew-ps");
+ ksz9021_load_values_from_of(phydev, of_node,
+ MII_KSZPHY_TX_DATA_PAD_SKEW,
+ "txd0-skew-ps", "txd1-skew-ps",
+ "txd2-skew-ps", "txd3-skew-ps");
+ }
+ return 0;
+}
+
+#define MII_KSZ9031RN_MMD_CTRL_REG 0x0d
+#define MII_KSZ9031RN_MMD_REGDATA_REG 0x0e
+#define OP_DATA 1
+#define KSZ9031_PS_TO_REG 60
+
+/* Extended registers */
+#define MII_KSZ9031RN_CONTROL_PAD_SKEW 4
+#define MII_KSZ9031RN_RX_DATA_PAD_SKEW 5
+#define MII_KSZ9031RN_TX_DATA_PAD_SKEW 6
+#define MII_KSZ9031RN_CLK_PAD_SKEW 8
+
+static int ksz9031_extended_write(struct phy_device *phydev,
+ u8 mode, u32 dev_addr, u32 regnum, u16 val)
+{
+ phy_write(phydev, MII_KSZ9031RN_MMD_CTRL_REG, dev_addr);
+ phy_write(phydev, MII_KSZ9031RN_MMD_REGDATA_REG, regnum);
+ phy_write(phydev, MII_KSZ9031RN_MMD_CTRL_REG, (mode << 14) | dev_addr);
+ return phy_write(phydev, MII_KSZ9031RN_MMD_REGDATA_REG, val);
+}
+
+static int ksz9031_extended_read(struct phy_device *phydev,
+ u8 mode, u32 dev_addr, u32 regnum)
+{
+ phy_write(phydev, MII_KSZ9031RN_MMD_CTRL_REG, dev_addr);
+ phy_write(phydev, MII_KSZ9031RN_MMD_REGDATA_REG, regnum);
+ phy_write(phydev, MII_KSZ9031RN_MMD_CTRL_REG, (mode << 14) | dev_addr);
+ return phy_read(phydev, MII_KSZ9031RN_MMD_REGDATA_REG);
+}
+
+static int ksz9031_of_load_skew_values(struct phy_device *phydev,
+ struct device_node *of_node,
+ u16 reg, size_t field_sz,
+ char *field[], u8 numfields)
+{
+ int val[4] = {-1, -2, -3, -4};
+ int matches = 0;
+ u16 mask;
+ u16 maxval;
+ u16 newval;
+ int i;
+
+ for (i = 0; i < numfields; i++)
+ if (!of_property_read_u32(of_node, field[i], val + i))
+ matches++;
+
+ if (!matches)
+ return 0;
+
+ if (matches < numfields)
+ newval = ksz9031_extended_read(phydev, OP_DATA, 2, reg);
+ else
+ newval = 0;
+
+ maxval = (field_sz == 4) ? 0xf : 0x1f;
+ for (i = 0; i < numfields; i++)
+ if (val[i] != -(i + 1)) {
+ mask = 0xffff;
+ mask ^= maxval << (field_sz * i);
+ newval = (newval & mask) |
+ (((val[i] / KSZ9031_PS_TO_REG) & maxval)
+ << (field_sz * i));
+ }
+
+ return ksz9031_extended_write(phydev, OP_DATA, 2, reg, newval);
+}
+
+static int ksz9031_config_init(struct phy_device *phydev)
+{
+ struct device *dev = &phydev->dev;
+ struct device_node *of_node = dev->of_node;
+ char *clk_skews[2] = {"rxc-skew-ps", "txc-skew-ps"};
+ char *rx_data_skews[4] = {
+ "rxd0-skew-ps", "rxd1-skew-ps",
+ "rxd2-skew-ps", "rxd3-skew-ps"
+ };
+ char *tx_data_skews[4] = {
+ "txd0-skew-ps", "txd1-skew-ps",
+ "txd2-skew-ps", "txd3-skew-ps"
+ };
+ char *control_skews[2] = {"txen-skew-ps", "rxdv-skew-ps"};
+
+ if (!of_node && dev->parent->of_node)
+ of_node = dev->parent->of_node;
+
+ if (of_node) {
+ ksz9031_of_load_skew_values(phydev, of_node,
+ MII_KSZ9031RN_CLK_PAD_SKEW, 5,
+ clk_skews, 2);
+
+ ksz9031_of_load_skew_values(phydev, of_node,
+ MII_KSZ9031RN_CONTROL_PAD_SKEW, 4,
+ control_skews, 2);
+
+ ksz9031_of_load_skew_values(phydev, of_node,
+ MII_KSZ9031RN_RX_DATA_PAD_SKEW, 4,
+ rx_data_skews, 4);
+
+ ksz9031_of_load_skew_values(phydev, of_node,
+ MII_KSZ9031RN_TX_DATA_PAD_SKEW, 4,
+ tx_data_skews, 4);
+ }
+ return 0;
+}
+
+#define KSZ8873MLL_GLOBAL_CONTROL_4 0x06
+#define KSZ8873MLL_GLOBAL_CONTROL_4_DUPLEX BIT(6)
+#define KSZ8873MLL_GLOBAL_CONTROL_4_SPEED BIT(4)
+static int ksz8873mll_read_status(struct phy_device *phydev)
+{
+ int regval;
+
+ /* dummy read */
+ regval = phy_read(phydev, KSZ8873MLL_GLOBAL_CONTROL_4);
+
+ regval = phy_read(phydev, KSZ8873MLL_GLOBAL_CONTROL_4);
+
+ if (regval & KSZ8873MLL_GLOBAL_CONTROL_4_DUPLEX)
+ phydev->duplex = DUPLEX_HALF;
+ else
+ phydev->duplex = DUPLEX_FULL;
+
+ if (regval & KSZ8873MLL_GLOBAL_CONTROL_4_SPEED)
+ phydev->speed = SPEED_10;
+ else
+ phydev->speed = SPEED_100;
+
+ phydev->link = 1;
+ phydev->pause = phydev->asym_pause = 0;
+
+ return 0;
+}
+
+static int ksz8873mll_config_aneg(struct phy_device *phydev)
+{
+ return 0;
+}
+
+/* This routine returns -1 as an indication to the caller that the
+ * Micrel ksz9021 10/100/1000 PHY does not support standard IEEE
+ * MMD extended PHY registers.
+ */
+static int
+ksz9021_rd_mmd_phyreg(struct phy_device *phydev, int ptrad, int devnum,
+ int regnum)
+{
+ return -1;
+}
+
+/* This routine does nothing since the Micrel ksz9021 does not support
+ * standard IEEE MMD extended PHY registers.
+ */
+static void
+ksz9021_wr_mmd_phyreg(struct phy_device *phydev, int ptrad, int devnum,
+ int regnum, u32 val)
+{
+}
+
+static int kszphy_probe(struct phy_device *phydev)
+{
+ const struct kszphy_type *type = phydev->drv->driver_data;
+ struct device_node *np = phydev->dev.of_node;
+ struct kszphy_priv *priv;
+ struct clk *clk;
+ int ret;
+
+ priv = devm_kzalloc(&phydev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ phydev->priv = priv;
+
+ priv->type = type;
+
+ if (type->led_mode_reg) {
+ ret = of_property_read_u32(np, "micrel,led-mode",
+ &priv->led_mode);
+ if (ret)
+ priv->led_mode = -1;
+
+ if (priv->led_mode > 3) {
+ dev_err(&phydev->dev, "invalid led mode: 0x%02x\n",
+ priv->led_mode);
+ priv->led_mode = -1;
+ }
+ } else {
+ priv->led_mode = -1;
+ }
+
+ clk = devm_clk_get(&phydev->dev, "rmii-ref");
+ /* NOTE: clk may be NULL if building without CONFIG_HAVE_CLK */
+ if (!IS_ERR_OR_NULL(clk)) {
+ unsigned long rate = clk_get_rate(clk);
+ bool rmii_ref_clk_sel_25_mhz;
+
+ priv->rmii_ref_clk_sel = type->has_rmii_ref_clk_sel;
+ rmii_ref_clk_sel_25_mhz = of_property_read_bool(np,
+ "micrel,rmii-reference-clock-select-25-mhz");
+
+ if (rate > 24500000 && rate < 25500000) {
+ priv->rmii_ref_clk_sel_val = rmii_ref_clk_sel_25_mhz;
+ } else if (rate > 49500000 && rate < 50500000) {
+ priv->rmii_ref_clk_sel_val = !rmii_ref_clk_sel_25_mhz;
+ } else {
+ dev_err(&phydev->dev, "Clock rate out of range: %ld\n", rate);
+ return -EINVAL;
+ }
+ }
+
+ /* Support legacy board-file configuration */
+ if (phydev->dev_flags & MICREL_PHY_50MHZ_CLK) {
+ priv->rmii_ref_clk_sel = true;
+ priv->rmii_ref_clk_sel_val = true;
+ }
+
+ return 0;
+}
+
+static struct phy_driver ksphy_driver[] = {
+{
+ .phy_id = PHY_ID_KS8737,
+ .phy_id_mask = 0x00fffff0,
+ .name = "Micrel KS8737",
+ .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause),
+ .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+ .driver_data = &ks8737_type,
+ .config_init = kszphy_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = kszphy_ack_interrupt,
+ .config_intr = kszphy_config_intr,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ .driver = { .owner = THIS_MODULE,},
+}, {
+ .phy_id = PHY_ID_KSZ8021,
+ .phy_id_mask = 0x00ffffff,
+ .name = "Micrel KSZ8021 or KSZ8031",
+ .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause |
+ SUPPORTED_Asym_Pause),
+ .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+ .driver_data = &ksz8021_type,
+ .probe = kszphy_probe,
+ .config_init = kszphy_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = kszphy_ack_interrupt,
+ .config_intr = kszphy_config_intr,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ .driver = { .owner = THIS_MODULE,},
+}, {
+ .phy_id = PHY_ID_KSZ8031,
+ .phy_id_mask = 0x00ffffff,
+ .name = "Micrel KSZ8031",
+ .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause |
+ SUPPORTED_Asym_Pause),
+ .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+ .driver_data = &ksz8021_type,
+ .probe = kszphy_probe,
+ .config_init = kszphy_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = kszphy_ack_interrupt,
+ .config_intr = kszphy_config_intr,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ .driver = { .owner = THIS_MODULE,},
+}, {
+ .phy_id = PHY_ID_KSZ8041,
+ .phy_id_mask = 0x00fffff0,
+ .name = "Micrel KSZ8041",
+ .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause
+ | SUPPORTED_Asym_Pause),
+ .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+ .driver_data = &ksz8041_type,
+ .probe = kszphy_probe,
+ .config_init = kszphy_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = kszphy_ack_interrupt,
+ .config_intr = kszphy_config_intr,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ .driver = { .owner = THIS_MODULE,},
+}, {
+ .phy_id = PHY_ID_KSZ8041RNLI,
+ .phy_id_mask = 0x00fffff0,
+ .name = "Micrel KSZ8041RNLI",
+ .features = PHY_BASIC_FEATURES |
+ SUPPORTED_Pause | SUPPORTED_Asym_Pause,
+ .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+ .driver_data = &ksz8041_type,
+ .probe = kszphy_probe,
+ .config_init = kszphy_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = kszphy_ack_interrupt,
+ .config_intr = kszphy_config_intr,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ .driver = { .owner = THIS_MODULE,},
+}, {
+ .phy_id = PHY_ID_KSZ8051,
+ .phy_id_mask = 0x00fffff0,
+ .name = "Micrel KSZ8051",
+ .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause
+ | SUPPORTED_Asym_Pause),
+ .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+ .driver_data = &ksz8051_type,
+ .probe = kszphy_probe,
+ .config_init = kszphy_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = kszphy_ack_interrupt,
+ .config_intr = kszphy_config_intr,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ .driver = { .owner = THIS_MODULE,},
+}, {
+ .phy_id = PHY_ID_KSZ8001,
+ .name = "Micrel KSZ8001 or KS8721",
+ .phy_id_mask = 0x00ffffff,
+ .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause),
+ .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+ .driver_data = &ksz8041_type,
+ .probe = kszphy_probe,
+ .config_init = kszphy_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = kszphy_ack_interrupt,
+ .config_intr = kszphy_config_intr,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ .driver = { .owner = THIS_MODULE,},
+}, {
+ .phy_id = PHY_ID_KSZ8081,
+ .name = "Micrel KSZ8081 or KSZ8091",
+ .phy_id_mask = 0x00fffff0,
+ .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause),
+ .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+ .driver_data = &ksz8081_type,
+ .probe = kszphy_probe,
+ .config_init = kszphy_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = kszphy_ack_interrupt,
+ .config_intr = kszphy_config_intr,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ .driver = { .owner = THIS_MODULE,},
+}, {
+ .phy_id = PHY_ID_KSZ8061,
+ .name = "Micrel KSZ8061",
+ .phy_id_mask = 0x00fffff0,
+ .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause),
+ .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+ .config_init = kszphy_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = kszphy_ack_interrupt,
+ .config_intr = kszphy_config_intr,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ .driver = { .owner = THIS_MODULE,},
+}, {
+ .phy_id = PHY_ID_KSZ9021,
+ .phy_id_mask = 0x000ffffe,
+ .name = "Micrel KSZ9021 Gigabit PHY",
+ .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause),
+ .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+ .driver_data = &ksz9021_type,
+ .config_init = ksz9021_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = kszphy_ack_interrupt,
+ .config_intr = kszphy_config_intr,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ .read_mmd_indirect = ksz9021_rd_mmd_phyreg,
+ .write_mmd_indirect = ksz9021_wr_mmd_phyreg,
+ .driver = { .owner = THIS_MODULE, },
+}, {
+ .phy_id = PHY_ID_KSZ9031,
+ .phy_id_mask = 0x00fffff0,
+ .name = "Micrel KSZ9031 Gigabit PHY",
+ .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause),
+ .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+ .driver_data = &ksz9021_type,
+ .config_init = ksz9031_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = kszphy_ack_interrupt,
+ .config_intr = kszphy_config_intr,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ .driver = { .owner = THIS_MODULE, },
+}, {
+ .phy_id = PHY_ID_KSZ8873MLL,
+ .phy_id_mask = 0x00fffff0,
+ .name = "Micrel KSZ8873MLL Switch",
+ .features = (SUPPORTED_Pause | SUPPORTED_Asym_Pause),
+ .flags = PHY_HAS_MAGICANEG,
+ .config_init = kszphy_config_init,
+ .config_aneg = ksz8873mll_config_aneg,
+ .read_status = ksz8873mll_read_status,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ .driver = { .owner = THIS_MODULE, },
+}, {
+ .phy_id = PHY_ID_KSZ886X,
+ .phy_id_mask = 0x00fffff0,
+ .name = "Micrel KSZ886X Switch",
+ .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause),
+ .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+ .config_init = kszphy_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ .driver = { .owner = THIS_MODULE, },
+} };
+
+module_phy_driver(ksphy_driver);
+
+MODULE_DESCRIPTION("Micrel PHY driver");
+MODULE_AUTHOR("David J. Choi");
+MODULE_LICENSE("GPL");
+
+static struct mdio_device_id __maybe_unused micrel_tbl[] = {
+ { PHY_ID_KSZ9021, 0x000ffffe },
+ { PHY_ID_KSZ9031, 0x00fffff0 },
+ { PHY_ID_KSZ8001, 0x00ffffff },
+ { PHY_ID_KS8737, 0x00fffff0 },
+ { PHY_ID_KSZ8021, 0x00ffffff },
+ { PHY_ID_KSZ8031, 0x00ffffff },
+ { PHY_ID_KSZ8041, 0x00fffff0 },
+ { PHY_ID_KSZ8051, 0x00fffff0 },
+ { PHY_ID_KSZ8061, 0x00fffff0 },
+ { PHY_ID_KSZ8081, 0x00fffff0 },
+ { PHY_ID_KSZ8873MLL, 0x00fffff0 },
+ { PHY_ID_KSZ886X, 0x00fffff0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(mdio, micrel_tbl);
diff --git a/kernel/drivers/net/phy/national.c b/kernel/drivers/net/phy/national.c
new file mode 100644
index 000000000..0a7b9c7f0
--- /dev/null
+++ b/kernel/drivers/net/phy/national.c
@@ -0,0 +1,157 @@
+/*
+ * drivers/net/phy/national.c
+ *
+ * Driver for National Semiconductor PHYs
+ *
+ * Author: Stuart Menefy <stuart.menefy@st.com>
+ * Maintainer: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+ *
+ * Copyright (c) 2008 STMicroelectronics Limited
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+#include <linux/netdevice.h>
+
+#define DEBUG
+
+/* DP83865 phy identifier values */
+#define DP83865_PHY_ID 0x20005c7a
+
+#define DP83865_INT_STATUS 0x14
+#define DP83865_INT_MASK 0x15
+#define DP83865_INT_CLEAR 0x17
+
+#define DP83865_INT_REMOTE_FAULT 0x0008
+#define DP83865_INT_ANE_COMPLETED 0x0010
+#define DP83865_INT_LINK_CHANGE 0xe000
+#define DP83865_INT_MASK_DEFAULT (DP83865_INT_REMOTE_FAULT | \
+ DP83865_INT_ANE_COMPLETED | \
+ DP83865_INT_LINK_CHANGE)
+
+/* Advanced proprietary configuration */
+#define NS_EXP_MEM_CTL 0x16
+#define NS_EXP_MEM_DATA 0x1d
+#define NS_EXP_MEM_ADD 0x1e
+
+#define LED_CTRL_REG 0x13
+#define AN_FALLBACK_AN 0x0001
+#define AN_FALLBACK_CRC 0x0002
+#define AN_FALLBACK_IE 0x0004
+#define ALL_FALLBACK_ON (AN_FALLBACK_AN | AN_FALLBACK_CRC | AN_FALLBACK_IE)
+
+enum hdx_loopback {
+ hdx_loopback_on = 0,
+ hdx_loopback_off = 1,
+};
+
+static u8 ns_exp_read(struct phy_device *phydev, u16 reg)
+{
+ phy_write(phydev, NS_EXP_MEM_ADD, reg);
+ return phy_read(phydev, NS_EXP_MEM_DATA);
+}
+
+static void ns_exp_write(struct phy_device *phydev, u16 reg, u8 data)
+{
+ phy_write(phydev, NS_EXP_MEM_ADD, reg);
+ phy_write(phydev, NS_EXP_MEM_DATA, data);
+}
+
+static int ns_config_intr(struct phy_device *phydev)
+{
+ int err;
+
+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+ err = phy_write(phydev, DP83865_INT_MASK,
+ DP83865_INT_MASK_DEFAULT);
+ else
+ err = phy_write(phydev, DP83865_INT_MASK, 0);
+
+ return err;
+}
+
+static int ns_ack_interrupt(struct phy_device *phydev)
+{
+ int ret = phy_read(phydev, DP83865_INT_STATUS);
+ if (ret < 0)
+ return ret;
+
+ /* Clear the interrupt status bit by writing a “1”
+ * to the corresponding bit in INT_CLEAR (2:0 are reserved) */
+ ret = phy_write(phydev, DP83865_INT_CLEAR, ret & ~0x7);
+
+ return ret;
+}
+
+static void ns_giga_speed_fallback(struct phy_device *phydev, int mode)
+{
+ int bmcr = phy_read(phydev, MII_BMCR);
+
+ phy_write(phydev, MII_BMCR, (bmcr | BMCR_PDOWN));
+
+ /* Enable 8 bit expended memory read/write (no auto increment) */
+ phy_write(phydev, NS_EXP_MEM_CTL, 0);
+ phy_write(phydev, NS_EXP_MEM_ADD, 0x1C0);
+ phy_write(phydev, NS_EXP_MEM_DATA, 0x0008);
+ phy_write(phydev, MII_BMCR, (bmcr & ~BMCR_PDOWN));
+ phy_write(phydev, LED_CTRL_REG, mode);
+}
+
+static void ns_10_base_t_hdx_loopack(struct phy_device *phydev, int disable)
+{
+ if (disable)
+ ns_exp_write(phydev, 0x1c0, ns_exp_read(phydev, 0x1c0) | 1);
+ else
+ ns_exp_write(phydev, 0x1c0,
+ ns_exp_read(phydev, 0x1c0) & 0xfffe);
+
+ pr_debug("10BASE-T HDX loopback %s\n",
+ (ns_exp_read(phydev, 0x1c0) & 0x0001) ? "off" : "on");
+}
+
+static int ns_config_init(struct phy_device *phydev)
+{
+ ns_giga_speed_fallback(phydev, ALL_FALLBACK_ON);
+ /* In the latest MAC or switches design, the 10 Mbps loopback
+ is desired to be turned off. */
+ ns_10_base_t_hdx_loopack(phydev, hdx_loopback_off);
+ return ns_ack_interrupt(phydev);
+}
+
+static struct phy_driver dp83865_driver[] = { {
+ .phy_id = DP83865_PHY_ID,
+ .phy_id_mask = 0xfffffff0,
+ .name = "NatSemi DP83865",
+ .features = PHY_GBIT_FEATURES | SUPPORTED_Pause | SUPPORTED_Asym_Pause,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = ns_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = ns_ack_interrupt,
+ .config_intr = ns_config_intr,
+ .driver = {.owner = THIS_MODULE,}
+} };
+
+module_phy_driver(dp83865_driver);
+
+MODULE_DESCRIPTION("NatSemi PHY driver");
+MODULE_AUTHOR("Stuart Menefy");
+MODULE_LICENSE("GPL");
+
+static struct mdio_device_id __maybe_unused ns_tbl[] = {
+ { DP83865_PHY_ID, 0xfffffff0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(mdio, ns_tbl);
diff --git a/kernel/drivers/net/phy/phy.c b/kernel/drivers/net/phy/phy.c
new file mode 100644
index 000000000..47cd57805
--- /dev/null
+++ b/kernel/drivers/net/phy/phy.c
@@ -0,0 +1,1211 @@
+/* Framework for configuring and reading PHY devices
+ * Based on code in sungem_phy.c and gianfar_phy.c
+ *
+ * Author: Andy Fleming
+ *
+ * Copyright (c) 2004 Freescale Semiconductor, Inc.
+ * Copyright (c) 2006, 2007 Maciej W. Rozycki
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/unistd.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+#include <linux/timer.h>
+#include <linux/workqueue.h>
+#include <linux/mdio.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <linux/atomic.h>
+
+#include <asm/irq.h>
+
+static const char *phy_speed_to_str(int speed)
+{
+ switch (speed) {
+ case SPEED_10:
+ return "10Mbps";
+ case SPEED_100:
+ return "100Mbps";
+ case SPEED_1000:
+ return "1Gbps";
+ case SPEED_2500:
+ return "2.5Gbps";
+ case SPEED_10000:
+ return "10Gbps";
+ case SPEED_UNKNOWN:
+ return "Unknown";
+ default:
+ return "Unsupported (update phy.c)";
+ }
+}
+
+/**
+ * phy_print_status - Convenience function to print out the current phy status
+ * @phydev: the phy_device struct
+ */
+void phy_print_status(struct phy_device *phydev)
+{
+ if (phydev->link) {
+ netdev_info(phydev->attached_dev,
+ "Link is Up - %s/%s - flow control %s\n",
+ phy_speed_to_str(phydev->speed),
+ DUPLEX_FULL == phydev->duplex ? "Full" : "Half",
+ phydev->pause ? "rx/tx" : "off");
+ } else {
+ netdev_info(phydev->attached_dev, "Link is Down\n");
+ }
+}
+EXPORT_SYMBOL(phy_print_status);
+
+/**
+ * phy_clear_interrupt - Ack the phy device's interrupt
+ * @phydev: the phy_device struct
+ *
+ * If the @phydev driver has an ack_interrupt function, call it to
+ * ack and clear the phy device's interrupt.
+ *
+ * Returns 0 on success or < 0 on error.
+ */
+static int phy_clear_interrupt(struct phy_device *phydev)
+{
+ if (phydev->drv->ack_interrupt)
+ return phydev->drv->ack_interrupt(phydev);
+
+ return 0;
+}
+
+/**
+ * phy_config_interrupt - configure the PHY device for the requested interrupts
+ * @phydev: the phy_device struct
+ * @interrupts: interrupt flags to configure for this @phydev
+ *
+ * Returns 0 on success or < 0 on error.
+ */
+static int phy_config_interrupt(struct phy_device *phydev, u32 interrupts)
+{
+ phydev->interrupts = interrupts;
+ if (phydev->drv->config_intr)
+ return phydev->drv->config_intr(phydev);
+
+ return 0;
+}
+
+
+/**
+ * phy_aneg_done - return auto-negotiation status
+ * @phydev: target phy_device struct
+ *
+ * Description: Return the auto-negotiation status from this @phydev
+ * Returns > 0 on success or < 0 on error. 0 means that auto-negotiation
+ * is still pending.
+ */
+static inline int phy_aneg_done(struct phy_device *phydev)
+{
+ if (phydev->drv->aneg_done)
+ return phydev->drv->aneg_done(phydev);
+
+ return genphy_aneg_done(phydev);
+}
+
+/* A structure for mapping a particular speed and duplex
+ * combination to a particular SUPPORTED and ADVERTISED value
+ */
+struct phy_setting {
+ int speed;
+ int duplex;
+ u32 setting;
+};
+
+/* A mapping of all SUPPORTED settings to speed/duplex */
+static const struct phy_setting settings[] = {
+ {
+ .speed = SPEED_10000,
+ .duplex = DUPLEX_FULL,
+ .setting = SUPPORTED_10000baseKR_Full,
+ },
+ {
+ .speed = SPEED_10000,
+ .duplex = DUPLEX_FULL,
+ .setting = SUPPORTED_10000baseKX4_Full,
+ },
+ {
+ .speed = SPEED_10000,
+ .duplex = DUPLEX_FULL,
+ .setting = SUPPORTED_10000baseT_Full,
+ },
+ {
+ .speed = SPEED_2500,
+ .duplex = DUPLEX_FULL,
+ .setting = SUPPORTED_2500baseX_Full,
+ },
+ {
+ .speed = SPEED_1000,
+ .duplex = DUPLEX_FULL,
+ .setting = SUPPORTED_1000baseKX_Full,
+ },
+ {
+ .speed = SPEED_1000,
+ .duplex = DUPLEX_FULL,
+ .setting = SUPPORTED_1000baseT_Full,
+ },
+ {
+ .speed = SPEED_1000,
+ .duplex = DUPLEX_HALF,
+ .setting = SUPPORTED_1000baseT_Half,
+ },
+ {
+ .speed = SPEED_100,
+ .duplex = DUPLEX_FULL,
+ .setting = SUPPORTED_100baseT_Full,
+ },
+ {
+ .speed = SPEED_100,
+ .duplex = DUPLEX_HALF,
+ .setting = SUPPORTED_100baseT_Half,
+ },
+ {
+ .speed = SPEED_10,
+ .duplex = DUPLEX_FULL,
+ .setting = SUPPORTED_10baseT_Full,
+ },
+ {
+ .speed = SPEED_10,
+ .duplex = DUPLEX_HALF,
+ .setting = SUPPORTED_10baseT_Half,
+ },
+};
+
+#define MAX_NUM_SETTINGS ARRAY_SIZE(settings)
+
+/**
+ * phy_find_setting - find a PHY settings array entry that matches speed & duplex
+ * @speed: speed to match
+ * @duplex: duplex to match
+ *
+ * Description: Searches the settings array for the setting which
+ * matches the desired speed and duplex, and returns the index
+ * of that setting. Returns the index of the last setting if
+ * none of the others match.
+ */
+static inline unsigned int phy_find_setting(int speed, int duplex)
+{
+ unsigned int idx = 0;
+
+ while (idx < ARRAY_SIZE(settings) &&
+ (settings[idx].speed != speed || settings[idx].duplex != duplex))
+ idx++;
+
+ return idx < MAX_NUM_SETTINGS ? idx : MAX_NUM_SETTINGS - 1;
+}
+
+/**
+ * phy_find_valid - find a PHY setting that matches the requested features mask
+ * @idx: The first index in settings[] to search
+ * @features: A mask of the valid settings
+ *
+ * Description: Returns the index of the first valid setting less
+ * than or equal to the one pointed to by idx, as determined by
+ * the mask in features. Returns the index of the last setting
+ * if nothing else matches.
+ */
+static inline unsigned int phy_find_valid(unsigned int idx, u32 features)
+{
+ while (idx < MAX_NUM_SETTINGS && !(settings[idx].setting & features))
+ idx++;
+
+ return idx < MAX_NUM_SETTINGS ? idx : MAX_NUM_SETTINGS - 1;
+}
+
+/**
+ * phy_check_valid - check if there is a valid PHY setting which matches
+ * speed, duplex, and feature mask
+ * @speed: speed to match
+ * @duplex: duplex to match
+ * @features: A mask of the valid settings
+ *
+ * Description: Returns true if there is a valid setting, false otherwise.
+ */
+static inline bool phy_check_valid(int speed, int duplex, u32 features)
+{
+ unsigned int idx;
+
+ idx = phy_find_valid(phy_find_setting(speed, duplex), features);
+
+ return settings[idx].speed == speed && settings[idx].duplex == duplex &&
+ (settings[idx].setting & features);
+}
+
+/**
+ * phy_sanitize_settings - make sure the PHY is set to supported speed and duplex
+ * @phydev: the target phy_device struct
+ *
+ * Description: Make sure the PHY is set to supported speeds and
+ * duplexes. Drop down by one in this order: 1000/FULL,
+ * 1000/HALF, 100/FULL, 100/HALF, 10/FULL, 10/HALF.
+ */
+static void phy_sanitize_settings(struct phy_device *phydev)
+{
+ u32 features = phydev->supported;
+ unsigned int idx;
+
+ /* Sanitize settings based on PHY capabilities */
+ if ((features & SUPPORTED_Autoneg) == 0)
+ phydev->autoneg = AUTONEG_DISABLE;
+
+ idx = phy_find_valid(phy_find_setting(phydev->speed, phydev->duplex),
+ features);
+
+ phydev->speed = settings[idx].speed;
+ phydev->duplex = settings[idx].duplex;
+}
+
+/**
+ * phy_ethtool_sset - generic ethtool sset function, handles all the details
+ * @phydev: target phy_device struct
+ * @cmd: ethtool_cmd
+ *
+ * A few notes about parameter checking:
+ * - We don't set port or transceiver, so we don't care what they
+ * were set to.
+ * - phy_start_aneg() will make sure forced settings are sane, and
+ * choose the next best ones from the ones selected, so we don't
+ * care if ethtool tries to give us bad values.
+ */
+int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd)
+{
+ u32 speed = ethtool_cmd_speed(cmd);
+
+ if (cmd->phy_address != phydev->addr)
+ return -EINVAL;
+
+ /* We make sure that we don't pass unsupported values in to the PHY */
+ cmd->advertising &= phydev->supported;
+
+ /* Verify the settings we care about. */
+ if (cmd->autoneg != AUTONEG_ENABLE && cmd->autoneg != AUTONEG_DISABLE)
+ return -EINVAL;
+
+ if (cmd->autoneg == AUTONEG_ENABLE && cmd->advertising == 0)
+ return -EINVAL;
+
+ if (cmd->autoneg == AUTONEG_DISABLE &&
+ ((speed != SPEED_1000 &&
+ speed != SPEED_100 &&
+ speed != SPEED_10) ||
+ (cmd->duplex != DUPLEX_HALF &&
+ cmd->duplex != DUPLEX_FULL)))
+ return -EINVAL;
+
+ phydev->autoneg = cmd->autoneg;
+
+ phydev->speed = speed;
+
+ phydev->advertising = cmd->advertising;
+
+ if (AUTONEG_ENABLE == cmd->autoneg)
+ phydev->advertising |= ADVERTISED_Autoneg;
+ else
+ phydev->advertising &= ~ADVERTISED_Autoneg;
+
+ phydev->duplex = cmd->duplex;
+
+ /* Restart the PHY */
+ phy_start_aneg(phydev);
+
+ return 0;
+}
+EXPORT_SYMBOL(phy_ethtool_sset);
+
+int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd)
+{
+ cmd->supported = phydev->supported;
+
+ cmd->advertising = phydev->advertising;
+ cmd->lp_advertising = phydev->lp_advertising;
+
+ ethtool_cmd_speed_set(cmd, phydev->speed);
+ cmd->duplex = phydev->duplex;
+ if (phydev->interface == PHY_INTERFACE_MODE_MOCA)
+ cmd->port = PORT_BNC;
+ else
+ cmd->port = PORT_MII;
+ cmd->phy_address = phydev->addr;
+ cmd->transceiver = phy_is_internal(phydev) ?
+ XCVR_INTERNAL : XCVR_EXTERNAL;
+ cmd->autoneg = phydev->autoneg;
+
+ return 0;
+}
+EXPORT_SYMBOL(phy_ethtool_gset);
+
+/**
+ * phy_mii_ioctl - generic PHY MII ioctl interface
+ * @phydev: the phy_device struct
+ * @ifr: &struct ifreq for socket ioctl's
+ * @cmd: ioctl cmd to execute
+ *
+ * Note that this function is currently incompatible with the
+ * PHYCONTROL layer. It changes registers without regard to
+ * current state. Use at own risk.
+ */
+int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd)
+{
+ struct mii_ioctl_data *mii_data = if_mii(ifr);
+ u16 val = mii_data->val_in;
+ bool change_autoneg = false;
+
+ switch (cmd) {
+ case SIOCGMIIPHY:
+ mii_data->phy_id = phydev->addr;
+ /* fall through */
+
+ case SIOCGMIIREG:
+ mii_data->val_out = mdiobus_read(phydev->bus, mii_data->phy_id,
+ mii_data->reg_num);
+ return 0;
+
+ case SIOCSMIIREG:
+ if (mii_data->phy_id == phydev->addr) {
+ switch (mii_data->reg_num) {
+ case MII_BMCR:
+ if ((val & (BMCR_RESET | BMCR_ANENABLE)) == 0) {
+ if (phydev->autoneg == AUTONEG_ENABLE)
+ change_autoneg = true;
+ phydev->autoneg = AUTONEG_DISABLE;
+ if (val & BMCR_FULLDPLX)
+ phydev->duplex = DUPLEX_FULL;
+ else
+ phydev->duplex = DUPLEX_HALF;
+ if (val & BMCR_SPEED1000)
+ phydev->speed = SPEED_1000;
+ else if (val & BMCR_SPEED100)
+ phydev->speed = SPEED_100;
+ else phydev->speed = SPEED_10;
+ }
+ else {
+ if (phydev->autoneg == AUTONEG_DISABLE)
+ change_autoneg = true;
+ phydev->autoneg = AUTONEG_ENABLE;
+ }
+ break;
+ case MII_ADVERTISE:
+ phydev->advertising = mii_adv_to_ethtool_adv_t(val);
+ change_autoneg = true;
+ break;
+ default:
+ /* do nothing */
+ break;
+ }
+ }
+
+ mdiobus_write(phydev->bus, mii_data->phy_id,
+ mii_data->reg_num, val);
+
+ if (mii_data->reg_num == MII_BMCR &&
+ val & BMCR_RESET)
+ return phy_init_hw(phydev);
+
+ if (change_autoneg)
+ return phy_start_aneg(phydev);
+
+ return 0;
+
+ case SIOCSHWTSTAMP:
+ if (phydev->drv->hwtstamp)
+ return phydev->drv->hwtstamp(phydev, ifr);
+ /* fall through */
+
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+EXPORT_SYMBOL(phy_mii_ioctl);
+
+/**
+ * phy_start_aneg - start auto-negotiation for this PHY device
+ * @phydev: the phy_device struct
+ *
+ * Description: Sanitizes the settings (if we're not autonegotiating
+ * them), and then calls the driver's config_aneg function.
+ * If the PHYCONTROL Layer is operating, we change the state to
+ * reflect the beginning of Auto-negotiation or forcing.
+ */
+int phy_start_aneg(struct phy_device *phydev)
+{
+ int err;
+
+ mutex_lock(&phydev->lock);
+
+ if (AUTONEG_DISABLE == phydev->autoneg)
+ phy_sanitize_settings(phydev);
+
+ /* Invalidate LP advertising flags */
+ phydev->lp_advertising = 0;
+
+ err = phydev->drv->config_aneg(phydev);
+ if (err < 0)
+ goto out_unlock;
+
+ if (phydev->state != PHY_HALTED) {
+ if (AUTONEG_ENABLE == phydev->autoneg) {
+ phydev->state = PHY_AN;
+ phydev->link_timeout = PHY_AN_TIMEOUT;
+ } else {
+ phydev->state = PHY_FORCING;
+ phydev->link_timeout = PHY_FORCE_TIMEOUT;
+ }
+ }
+
+out_unlock:
+ mutex_unlock(&phydev->lock);
+ return err;
+}
+EXPORT_SYMBOL(phy_start_aneg);
+
+/**
+ * phy_start_machine - start PHY state machine tracking
+ * @phydev: the phy_device struct
+ *
+ * Description: The PHY infrastructure can run a state machine
+ * which tracks whether the PHY is starting up, negotiating,
+ * etc. This function starts the timer which tracks the state
+ * of the PHY. If you want to maintain your own state machine,
+ * do not call this function.
+ */
+void phy_start_machine(struct phy_device *phydev)
+{
+ queue_delayed_work(system_power_efficient_wq, &phydev->state_queue, HZ);
+}
+
+/**
+ * phy_stop_machine - stop the PHY state machine tracking
+ * @phydev: target phy_device struct
+ *
+ * Description: Stops the state machine timer, sets the state to UP
+ * (unless it wasn't up yet). This function must be called BEFORE
+ * phy_detach.
+ */
+void phy_stop_machine(struct phy_device *phydev)
+{
+ cancel_delayed_work_sync(&phydev->state_queue);
+
+ mutex_lock(&phydev->lock);
+ if (phydev->state > PHY_UP)
+ phydev->state = PHY_UP;
+ mutex_unlock(&phydev->lock);
+}
+
+/**
+ * phy_error - enter HALTED state for this PHY device
+ * @phydev: target phy_device struct
+ *
+ * Moves the PHY to the HALTED state in response to a read
+ * or write error, and tells the controller the link is down.
+ * Must not be called from interrupt context, or while the
+ * phydev->lock is held.
+ */
+static void phy_error(struct phy_device *phydev)
+{
+ mutex_lock(&phydev->lock);
+ phydev->state = PHY_HALTED;
+ mutex_unlock(&phydev->lock);
+}
+
+/**
+ * phy_interrupt - PHY interrupt handler
+ * @irq: interrupt line
+ * @phy_dat: phy_device pointer
+ *
+ * Description: When a PHY interrupt occurs, the handler disables
+ * interrupts, and schedules a work task to clear the interrupt.
+ */
+static irqreturn_t phy_interrupt(int irq, void *phy_dat)
+{
+ struct phy_device *phydev = phy_dat;
+
+ if (PHY_HALTED == phydev->state)
+ return IRQ_NONE; /* It can't be ours. */
+
+ /* The MDIO bus is not allowed to be written in interrupt
+ * context, so we need to disable the irq here. A work
+ * queue will write the PHY to disable and clear the
+ * interrupt, and then reenable the irq line.
+ */
+ disable_irq_nosync(irq);
+ atomic_inc(&phydev->irq_disable);
+
+ queue_work(system_power_efficient_wq, &phydev->phy_queue);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * phy_enable_interrupts - Enable the interrupts from the PHY side
+ * @phydev: target phy_device struct
+ */
+static int phy_enable_interrupts(struct phy_device *phydev)
+{
+ int err = phy_clear_interrupt(phydev);
+
+ if (err < 0)
+ return err;
+
+ return phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED);
+}
+
+/**
+ * phy_disable_interrupts - Disable the PHY interrupts from the PHY side
+ * @phydev: target phy_device struct
+ */
+static int phy_disable_interrupts(struct phy_device *phydev)
+{
+ int err;
+
+ /* Disable PHY interrupts */
+ err = phy_config_interrupt(phydev, PHY_INTERRUPT_DISABLED);
+ if (err)
+ goto phy_err;
+
+ /* Clear the interrupt */
+ err = phy_clear_interrupt(phydev);
+ if (err)
+ goto phy_err;
+
+ return 0;
+
+phy_err:
+ phy_error(phydev);
+
+ return err;
+}
+
+/**
+ * phy_start_interrupts - request and enable interrupts for a PHY device
+ * @phydev: target phy_device struct
+ *
+ * Description: Request the interrupt for the given PHY.
+ * If this fails, then we set irq to PHY_POLL.
+ * Otherwise, we enable the interrupts in the PHY.
+ * This should only be called with a valid IRQ number.
+ * Returns 0 on success or < 0 on error.
+ */
+int phy_start_interrupts(struct phy_device *phydev)
+{
+ atomic_set(&phydev->irq_disable, 0);
+ if (request_irq(phydev->irq, phy_interrupt, 0, "phy_interrupt",
+ phydev) < 0) {
+ pr_warn("%s: Can't get IRQ %d (PHY)\n",
+ phydev->bus->name, phydev->irq);
+ phydev->irq = PHY_POLL;
+ return 0;
+ }
+
+ return phy_enable_interrupts(phydev);
+}
+EXPORT_SYMBOL(phy_start_interrupts);
+
+/**
+ * phy_stop_interrupts - disable interrupts from a PHY device
+ * @phydev: target phy_device struct
+ */
+int phy_stop_interrupts(struct phy_device *phydev)
+{
+ int err = phy_disable_interrupts(phydev);
+
+ if (err)
+ phy_error(phydev);
+
+ free_irq(phydev->irq, phydev);
+
+ /* Cannot call flush_scheduled_work() here as desired because
+ * of rtnl_lock(), but we do not really care about what would
+ * be done, except from enable_irq(), so cancel any work
+ * possibly pending and take care of the matter below.
+ */
+ cancel_work_sync(&phydev->phy_queue);
+ /* If work indeed has been cancelled, disable_irq() will have
+ * been left unbalanced from phy_interrupt() and enable_irq()
+ * has to be called so that other devices on the line work.
+ */
+ while (atomic_dec_return(&phydev->irq_disable) >= 0)
+ enable_irq(phydev->irq);
+
+ return err;
+}
+EXPORT_SYMBOL(phy_stop_interrupts);
+
+/**
+ * phy_change - Scheduled by the phy_interrupt/timer to handle PHY changes
+ * @work: work_struct that describes the work to be done
+ */
+void phy_change(struct work_struct *work)
+{
+ struct phy_device *phydev =
+ container_of(work, struct phy_device, phy_queue);
+
+ if (phydev->drv->did_interrupt &&
+ !phydev->drv->did_interrupt(phydev))
+ goto ignore;
+
+ if (phy_disable_interrupts(phydev))
+ goto phy_err;
+
+ mutex_lock(&phydev->lock);
+ if ((PHY_RUNNING == phydev->state) || (PHY_NOLINK == phydev->state))
+ phydev->state = PHY_CHANGELINK;
+ mutex_unlock(&phydev->lock);
+
+ atomic_dec(&phydev->irq_disable);
+ enable_irq(phydev->irq);
+
+ /* Reenable interrupts */
+ if (PHY_HALTED != phydev->state &&
+ phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED))
+ goto irq_enable_err;
+
+ /* reschedule state queue work to run as soon as possible */
+ cancel_delayed_work_sync(&phydev->state_queue);
+ queue_delayed_work(system_power_efficient_wq, &phydev->state_queue, 0);
+ return;
+
+ignore:
+ atomic_dec(&phydev->irq_disable);
+ enable_irq(phydev->irq);
+ return;
+
+irq_enable_err:
+ disable_irq(phydev->irq);
+ atomic_inc(&phydev->irq_disable);
+phy_err:
+ phy_error(phydev);
+}
+
+/**
+ * phy_stop - Bring down the PHY link, and stop checking the status
+ * @phydev: target phy_device struct
+ */
+void phy_stop(struct phy_device *phydev)
+{
+ mutex_lock(&phydev->lock);
+
+ if (PHY_HALTED == phydev->state)
+ goto out_unlock;
+
+ if (phy_interrupt_is_valid(phydev)) {
+ /* Disable PHY Interrupts */
+ phy_config_interrupt(phydev, PHY_INTERRUPT_DISABLED);
+
+ /* Clear any pending interrupts */
+ phy_clear_interrupt(phydev);
+ }
+
+ phydev->state = PHY_HALTED;
+
+out_unlock:
+ mutex_unlock(&phydev->lock);
+
+ /* Cannot call flush_scheduled_work() here as desired because
+ * of rtnl_lock(), but PHY_HALTED shall guarantee phy_change()
+ * will not reenable interrupts.
+ */
+}
+EXPORT_SYMBOL(phy_stop);
+
+/**
+ * phy_start - start or restart a PHY device
+ * @phydev: target phy_device struct
+ *
+ * Description: Indicates the attached device's readiness to
+ * handle PHY-related work. Used during startup to start the
+ * PHY, and after a call to phy_stop() to resume operation.
+ * Also used to indicate the MDIO bus has cleared an error
+ * condition.
+ */
+void phy_start(struct phy_device *phydev)
+{
+ bool do_resume = false;
+ int err = 0;
+
+ mutex_lock(&phydev->lock);
+
+ switch (phydev->state) {
+ case PHY_STARTING:
+ phydev->state = PHY_PENDING;
+ break;
+ case PHY_READY:
+ phydev->state = PHY_UP;
+ break;
+ case PHY_HALTED:
+ /* make sure interrupts are re-enabled for the PHY */
+ err = phy_enable_interrupts(phydev);
+ if (err < 0)
+ break;
+
+ phydev->state = PHY_RESUMING;
+ do_resume = true;
+ break;
+ default:
+ break;
+ }
+ mutex_unlock(&phydev->lock);
+
+ /* if phy was suspended, bring the physical link up again */
+ if (do_resume)
+ phy_resume(phydev);
+}
+EXPORT_SYMBOL(phy_start);
+
+/**
+ * phy_state_machine - Handle the state machine
+ * @work: work_struct that describes the work to be done
+ */
+void phy_state_machine(struct work_struct *work)
+{
+ struct delayed_work *dwork = to_delayed_work(work);
+ struct phy_device *phydev =
+ container_of(dwork, struct phy_device, state_queue);
+ bool needs_aneg = false, do_suspend = false;
+ int err = 0;
+
+ mutex_lock(&phydev->lock);
+
+ if (phydev->drv->link_change_notify)
+ phydev->drv->link_change_notify(phydev);
+
+ switch (phydev->state) {
+ case PHY_DOWN:
+ case PHY_STARTING:
+ case PHY_READY:
+ case PHY_PENDING:
+ break;
+ case PHY_UP:
+ needs_aneg = true;
+
+ phydev->link_timeout = PHY_AN_TIMEOUT;
+
+ break;
+ case PHY_AN:
+ err = phy_read_status(phydev);
+ if (err < 0)
+ break;
+
+ /* If the link is down, give up on negotiation for now */
+ if (!phydev->link) {
+ phydev->state = PHY_NOLINK;
+ netif_carrier_off(phydev->attached_dev);
+ phydev->adjust_link(phydev->attached_dev);
+ break;
+ }
+
+ /* Check if negotiation is done. Break if there's an error */
+ err = phy_aneg_done(phydev);
+ if (err < 0)
+ break;
+
+ /* If AN is done, we're running */
+ if (err > 0) {
+ phydev->state = PHY_RUNNING;
+ netif_carrier_on(phydev->attached_dev);
+ phydev->adjust_link(phydev->attached_dev);
+
+ } else if (0 == phydev->link_timeout--)
+ needs_aneg = true;
+ break;
+ case PHY_NOLINK:
+ err = phy_read_status(phydev);
+ if (err)
+ break;
+
+ if (phydev->link) {
+ if (AUTONEG_ENABLE == phydev->autoneg) {
+ err = phy_aneg_done(phydev);
+ if (err < 0)
+ break;
+
+ if (!err) {
+ phydev->state = PHY_AN;
+ phydev->link_timeout = PHY_AN_TIMEOUT;
+ break;
+ }
+ }
+ phydev->state = PHY_RUNNING;
+ netif_carrier_on(phydev->attached_dev);
+ phydev->adjust_link(phydev->attached_dev);
+ }
+ break;
+ case PHY_FORCING:
+ err = genphy_update_link(phydev);
+ if (err)
+ break;
+
+ if (phydev->link) {
+ phydev->state = PHY_RUNNING;
+ netif_carrier_on(phydev->attached_dev);
+ } else {
+ if (0 == phydev->link_timeout--)
+ needs_aneg = true;
+ }
+
+ phydev->adjust_link(phydev->attached_dev);
+ break;
+ case PHY_RUNNING:
+ /* Only register a CHANGE if we are
+ * polling or ignoring interrupts
+ */
+ if (!phy_interrupt_is_valid(phydev))
+ phydev->state = PHY_CHANGELINK;
+ break;
+ case PHY_CHANGELINK:
+ err = phy_read_status(phydev);
+ if (err)
+ break;
+
+ if (phydev->link) {
+ phydev->state = PHY_RUNNING;
+ netif_carrier_on(phydev->attached_dev);
+ } else {
+ phydev->state = PHY_NOLINK;
+ netif_carrier_off(phydev->attached_dev);
+ }
+
+ phydev->adjust_link(phydev->attached_dev);
+
+ if (phy_interrupt_is_valid(phydev))
+ err = phy_config_interrupt(phydev,
+ PHY_INTERRUPT_ENABLED);
+ break;
+ case PHY_HALTED:
+ if (phydev->link) {
+ phydev->link = 0;
+ netif_carrier_off(phydev->attached_dev);
+ phydev->adjust_link(phydev->attached_dev);
+ do_suspend = true;
+ }
+ break;
+ case PHY_RESUMING:
+ if (AUTONEG_ENABLE == phydev->autoneg) {
+ err = phy_aneg_done(phydev);
+ if (err < 0)
+ break;
+
+ /* err > 0 if AN is done.
+ * Otherwise, it's 0, and we're still waiting for AN
+ */
+ if (err > 0) {
+ err = phy_read_status(phydev);
+ if (err)
+ break;
+
+ if (phydev->link) {
+ phydev->state = PHY_RUNNING;
+ netif_carrier_on(phydev->attached_dev);
+ } else {
+ phydev->state = PHY_NOLINK;
+ }
+ phydev->adjust_link(phydev->attached_dev);
+ } else {
+ phydev->state = PHY_AN;
+ phydev->link_timeout = PHY_AN_TIMEOUT;
+ }
+ } else {
+ err = phy_read_status(phydev);
+ if (err)
+ break;
+
+ if (phydev->link) {
+ phydev->state = PHY_RUNNING;
+ netif_carrier_on(phydev->attached_dev);
+ } else {
+ phydev->state = PHY_NOLINK;
+ }
+ phydev->adjust_link(phydev->attached_dev);
+ }
+ break;
+ }
+
+ mutex_unlock(&phydev->lock);
+
+ if (needs_aneg)
+ err = phy_start_aneg(phydev);
+ else if (do_suspend)
+ phy_suspend(phydev);
+
+ if (err < 0)
+ phy_error(phydev);
+
+ queue_delayed_work(system_power_efficient_wq, &phydev->state_queue,
+ PHY_STATE_TIME * HZ);
+}
+
+void phy_mac_interrupt(struct phy_device *phydev, int new_link)
+{
+ cancel_work_sync(&phydev->phy_queue);
+ phydev->link = new_link;
+ schedule_work(&phydev->phy_queue);
+}
+EXPORT_SYMBOL(phy_mac_interrupt);
+
+static inline void mmd_phy_indirect(struct mii_bus *bus, int prtad, int devad,
+ int addr)
+{
+ /* Write the desired MMD Devad */
+ bus->write(bus, addr, MII_MMD_CTRL, devad);
+
+ /* Write the desired MMD register address */
+ bus->write(bus, addr, MII_MMD_DATA, prtad);
+
+ /* Select the Function : DATA with no post increment */
+ bus->write(bus, addr, MII_MMD_CTRL, (devad | MII_MMD_CTRL_NOINCR));
+}
+
+/**
+ * phy_read_mmd_indirect - reads data from the MMD registers
+ * @phydev: The PHY device bus
+ * @prtad: MMD Address
+ * @devad: MMD DEVAD
+ * @addr: PHY address on the MII bus
+ *
+ * Description: it reads data from the MMD registers (clause 22 to access to
+ * clause 45) of the specified phy address.
+ * To read these register we have:
+ * 1) Write reg 13 // DEVAD
+ * 2) Write reg 14 // MMD Address
+ * 3) Write reg 13 // MMD Data Command for MMD DEVAD
+ * 3) Read reg 14 // Read MMD data
+ */
+int phy_read_mmd_indirect(struct phy_device *phydev, int prtad,
+ int devad, int addr)
+{
+ struct phy_driver *phydrv = phydev->drv;
+ int value = -1;
+
+ if (phydrv->read_mmd_indirect == NULL) {
+ mmd_phy_indirect(phydev->bus, prtad, devad, addr);
+
+ /* Read the content of the MMD's selected register */
+ value = phydev->bus->read(phydev->bus, addr, MII_MMD_DATA);
+ } else {
+ value = phydrv->read_mmd_indirect(phydev, prtad, devad, addr);
+ }
+ return value;
+}
+EXPORT_SYMBOL(phy_read_mmd_indirect);
+
+/**
+ * phy_write_mmd_indirect - writes data to the MMD registers
+ * @phydev: The PHY device
+ * @prtad: MMD Address
+ * @devad: MMD DEVAD
+ * @addr: PHY address on the MII bus
+ * @data: data to write in the MMD register
+ *
+ * Description: Write data from the MMD registers of the specified
+ * phy address.
+ * To write these register we have:
+ * 1) Write reg 13 // DEVAD
+ * 2) Write reg 14 // MMD Address
+ * 3) Write reg 13 // MMD Data Command for MMD DEVAD
+ * 3) Write reg 14 // Write MMD data
+ */
+void phy_write_mmd_indirect(struct phy_device *phydev, int prtad,
+ int devad, int addr, u32 data)
+{
+ struct phy_driver *phydrv = phydev->drv;
+
+ if (phydrv->write_mmd_indirect == NULL) {
+ mmd_phy_indirect(phydev->bus, prtad, devad, addr);
+
+ /* Write the data into MMD's selected register */
+ phydev->bus->write(phydev->bus, addr, MII_MMD_DATA, data);
+ } else {
+ phydrv->write_mmd_indirect(phydev, prtad, devad, addr, data);
+ }
+}
+EXPORT_SYMBOL(phy_write_mmd_indirect);
+
+/**
+ * phy_init_eee - init and check the EEE feature
+ * @phydev: target phy_device struct
+ * @clk_stop_enable: PHY may stop the clock during LPI
+ *
+ * Description: it checks if the Energy-Efficient Ethernet (EEE)
+ * is supported by looking at the MMD registers 3.20 and 7.60/61
+ * and it programs the MMD register 3.0 setting the "Clock stop enable"
+ * bit if required.
+ */
+int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable)
+{
+ /* According to 802.3az,the EEE is supported only in full duplex-mode.
+ * Also EEE feature is active when core is operating with MII, GMII
+ * or RGMII (all kinds). Internal PHYs are also allowed to proceed and
+ * should return an error if they do not support EEE.
+ */
+ if ((phydev->duplex == DUPLEX_FULL) &&
+ ((phydev->interface == PHY_INTERFACE_MODE_MII) ||
+ (phydev->interface == PHY_INTERFACE_MODE_GMII) ||
+ (phydev->interface >= PHY_INTERFACE_MODE_RGMII &&
+ phydev->interface <= PHY_INTERFACE_MODE_RGMII_TXID) ||
+ phy_is_internal(phydev))) {
+ int eee_lp, eee_cap, eee_adv;
+ u32 lp, cap, adv;
+ int status;
+
+ /* Read phy status to properly get the right settings */
+ status = phy_read_status(phydev);
+ if (status)
+ return status;
+
+ /* First check if the EEE ability is supported */
+ eee_cap = phy_read_mmd_indirect(phydev, MDIO_PCS_EEE_ABLE,
+ MDIO_MMD_PCS, phydev->addr);
+ if (eee_cap <= 0)
+ goto eee_exit_err;
+
+ cap = mmd_eee_cap_to_ethtool_sup_t(eee_cap);
+ if (!cap)
+ goto eee_exit_err;
+
+ /* Check which link settings negotiated and verify it in
+ * the EEE advertising registers.
+ */
+ eee_lp = phy_read_mmd_indirect(phydev, MDIO_AN_EEE_LPABLE,
+ MDIO_MMD_AN, phydev->addr);
+ if (eee_lp <= 0)
+ goto eee_exit_err;
+
+ eee_adv = phy_read_mmd_indirect(phydev, MDIO_AN_EEE_ADV,
+ MDIO_MMD_AN, phydev->addr);
+ if (eee_adv <= 0)
+ goto eee_exit_err;
+
+ adv = mmd_eee_adv_to_ethtool_adv_t(eee_adv);
+ lp = mmd_eee_adv_to_ethtool_adv_t(eee_lp);
+ if (!phy_check_valid(phydev->speed, phydev->duplex, lp & adv))
+ goto eee_exit_err;
+
+ if (clk_stop_enable) {
+ /* Configure the PHY to stop receiving xMII
+ * clock while it is signaling LPI.
+ */
+ int val = phy_read_mmd_indirect(phydev, MDIO_CTRL1,
+ MDIO_MMD_PCS,
+ phydev->addr);
+ if (val < 0)
+ return val;
+
+ val |= MDIO_PCS_CTRL1_CLKSTOP_EN;
+ phy_write_mmd_indirect(phydev, MDIO_CTRL1,
+ MDIO_MMD_PCS, phydev->addr,
+ val);
+ }
+
+ return 0; /* EEE supported */
+ }
+eee_exit_err:
+ return -EPROTONOSUPPORT;
+}
+EXPORT_SYMBOL(phy_init_eee);
+
+/**
+ * phy_get_eee_err - report the EEE wake error count
+ * @phydev: target phy_device struct
+ *
+ * Description: it is to report the number of time where the PHY
+ * failed to complete its normal wake sequence.
+ */
+int phy_get_eee_err(struct phy_device *phydev)
+{
+ return phy_read_mmd_indirect(phydev, MDIO_PCS_EEE_WK_ERR,
+ MDIO_MMD_PCS, phydev->addr);
+}
+EXPORT_SYMBOL(phy_get_eee_err);
+
+/**
+ * phy_ethtool_get_eee - get EEE supported and status
+ * @phydev: target phy_device struct
+ * @data: ethtool_eee data
+ *
+ * Description: it reportes the Supported/Advertisement/LP Advertisement
+ * capabilities.
+ */
+int phy_ethtool_get_eee(struct phy_device *phydev, struct ethtool_eee *data)
+{
+ int val;
+
+ /* Get Supported EEE */
+ val = phy_read_mmd_indirect(phydev, MDIO_PCS_EEE_ABLE,
+ MDIO_MMD_PCS, phydev->addr);
+ if (val < 0)
+ return val;
+ data->supported = mmd_eee_cap_to_ethtool_sup_t(val);
+
+ /* Get advertisement EEE */
+ val = phy_read_mmd_indirect(phydev, MDIO_AN_EEE_ADV,
+ MDIO_MMD_AN, phydev->addr);
+ if (val < 0)
+ return val;
+ data->advertised = mmd_eee_adv_to_ethtool_adv_t(val);
+
+ /* Get LP advertisement EEE */
+ val = phy_read_mmd_indirect(phydev, MDIO_AN_EEE_LPABLE,
+ MDIO_MMD_AN, phydev->addr);
+ if (val < 0)
+ return val;
+ data->lp_advertised = mmd_eee_adv_to_ethtool_adv_t(val);
+
+ return 0;
+}
+EXPORT_SYMBOL(phy_ethtool_get_eee);
+
+/**
+ * phy_ethtool_set_eee - set EEE supported and status
+ * @phydev: target phy_device struct
+ * @data: ethtool_eee data
+ *
+ * Description: it is to program the Advertisement EEE register.
+ */
+int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data)
+{
+ int val = ethtool_adv_to_mmd_eee_adv_t(data->advertised);
+
+ phy_write_mmd_indirect(phydev, MDIO_AN_EEE_ADV, MDIO_MMD_AN,
+ phydev->addr, val);
+
+ return 0;
+}
+EXPORT_SYMBOL(phy_ethtool_set_eee);
+
+int phy_ethtool_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol)
+{
+ if (phydev->drv->set_wol)
+ return phydev->drv->set_wol(phydev, wol);
+
+ return -EOPNOTSUPP;
+}
+EXPORT_SYMBOL(phy_ethtool_set_wol);
+
+void phy_ethtool_get_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol)
+{
+ if (phydev->drv->get_wol)
+ phydev->drv->get_wol(phydev, wol);
+}
+EXPORT_SYMBOL(phy_ethtool_get_wol);
diff --git a/kernel/drivers/net/phy/phy_device.c b/kernel/drivers/net/phy/phy_device.c
new file mode 100644
index 000000000..d551df62e
--- /dev/null
+++ b/kernel/drivers/net/phy/phy_device.c
@@ -0,0 +1,1407 @@
+/* Framework for finding and configuring PHYs.
+ * Also contains generic PHY driver
+ *
+ * Author: Andy Fleming
+ *
+ * Copyright (c) 2004 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/unistd.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+#include <linux/mdio.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <linux/of.h>
+
+#include <asm/irq.h>
+
+MODULE_DESCRIPTION("PHY library");
+MODULE_AUTHOR("Andy Fleming");
+MODULE_LICENSE("GPL");
+
+void phy_device_free(struct phy_device *phydev)
+{
+ put_device(&phydev->dev);
+}
+EXPORT_SYMBOL(phy_device_free);
+
+static void phy_device_release(struct device *dev)
+{
+ kfree(to_phy_device(dev));
+}
+
+enum genphy_driver {
+ GENPHY_DRV_1G,
+ GENPHY_DRV_10G,
+ GENPHY_DRV_MAX
+};
+
+static struct phy_driver genphy_driver[GENPHY_DRV_MAX];
+
+static LIST_HEAD(phy_fixup_list);
+static DEFINE_MUTEX(phy_fixup_lock);
+
+/**
+ * phy_register_fixup - creates a new phy_fixup and adds it to the list
+ * @bus_id: A string which matches phydev->dev.bus_id (or PHY_ANY_ID)
+ * @phy_uid: Used to match against phydev->phy_id (the UID of the PHY)
+ * It can also be PHY_ANY_UID
+ * @phy_uid_mask: Applied to phydev->phy_id and fixup->phy_uid before
+ * comparison
+ * @run: The actual code to be run when a matching PHY is found
+ */
+int phy_register_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask,
+ int (*run)(struct phy_device *))
+{
+ struct phy_fixup *fixup = kzalloc(sizeof(*fixup), GFP_KERNEL);
+
+ if (!fixup)
+ return -ENOMEM;
+
+ strlcpy(fixup->bus_id, bus_id, sizeof(fixup->bus_id));
+ fixup->phy_uid = phy_uid;
+ fixup->phy_uid_mask = phy_uid_mask;
+ fixup->run = run;
+
+ mutex_lock(&phy_fixup_lock);
+ list_add_tail(&fixup->list, &phy_fixup_list);
+ mutex_unlock(&phy_fixup_lock);
+
+ return 0;
+}
+EXPORT_SYMBOL(phy_register_fixup);
+
+/* Registers a fixup to be run on any PHY with the UID in phy_uid */
+int phy_register_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask,
+ int (*run)(struct phy_device *))
+{
+ return phy_register_fixup(PHY_ANY_ID, phy_uid, phy_uid_mask, run);
+}
+EXPORT_SYMBOL(phy_register_fixup_for_uid);
+
+/* Registers a fixup to be run on the PHY with id string bus_id */
+int phy_register_fixup_for_id(const char *bus_id,
+ int (*run)(struct phy_device *))
+{
+ return phy_register_fixup(bus_id, PHY_ANY_UID, 0xffffffff, run);
+}
+EXPORT_SYMBOL(phy_register_fixup_for_id);
+
+/* Returns 1 if fixup matches phydev in bus_id and phy_uid.
+ * Fixups can be set to match any in one or more fields.
+ */
+static int phy_needs_fixup(struct phy_device *phydev, struct phy_fixup *fixup)
+{
+ if (strcmp(fixup->bus_id, dev_name(&phydev->dev)) != 0)
+ if (strcmp(fixup->bus_id, PHY_ANY_ID) != 0)
+ return 0;
+
+ if ((fixup->phy_uid & fixup->phy_uid_mask) !=
+ (phydev->phy_id & fixup->phy_uid_mask))
+ if (fixup->phy_uid != PHY_ANY_UID)
+ return 0;
+
+ return 1;
+}
+
+/* Runs any matching fixups for this phydev */
+static int phy_scan_fixups(struct phy_device *phydev)
+{
+ struct phy_fixup *fixup;
+
+ mutex_lock(&phy_fixup_lock);
+ list_for_each_entry(fixup, &phy_fixup_list, list) {
+ if (phy_needs_fixup(phydev, fixup)) {
+ int err = fixup->run(phydev);
+
+ if (err < 0) {
+ mutex_unlock(&phy_fixup_lock);
+ return err;
+ }
+ phydev->has_fixups = true;
+ }
+ }
+ mutex_unlock(&phy_fixup_lock);
+
+ return 0;
+}
+
+struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id,
+ bool is_c45,
+ struct phy_c45_device_ids *c45_ids)
+{
+ struct phy_device *dev;
+
+ /* We allocate the device, and initialize the default values */
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+ if (NULL == dev)
+ return (struct phy_device *)PTR_ERR((void *)-ENOMEM);
+
+ dev->dev.release = phy_device_release;
+
+ dev->speed = 0;
+ dev->duplex = -1;
+ dev->pause = 0;
+ dev->asym_pause = 0;
+ dev->link = 1;
+ dev->interface = PHY_INTERFACE_MODE_GMII;
+
+ dev->autoneg = AUTONEG_ENABLE;
+
+ dev->is_c45 = is_c45;
+ dev->addr = addr;
+ dev->phy_id = phy_id;
+ if (c45_ids)
+ dev->c45_ids = *c45_ids;
+ dev->bus = bus;
+ dev->dev.parent = bus->parent;
+ dev->dev.bus = &mdio_bus_type;
+ dev->irq = bus->irq != NULL ? bus->irq[addr] : PHY_POLL;
+ dev_set_name(&dev->dev, PHY_ID_FMT, bus->id, addr);
+
+ dev->state = PHY_DOWN;
+
+ mutex_init(&dev->lock);
+ INIT_DELAYED_WORK(&dev->state_queue, phy_state_machine);
+ INIT_WORK(&dev->phy_queue, phy_change);
+
+ /* Request the appropriate module unconditionally; don't
+ * bother trying to do so only if it isn't already loaded,
+ * because that gets complicated. A hotplug event would have
+ * done an unconditional modprobe anyway.
+ * We don't do normal hotplug because it won't work for MDIO
+ * -- because it relies on the device staying around for long
+ * enough for the driver to get loaded. With MDIO, the NIC
+ * driver will get bored and give up as soon as it finds that
+ * there's no driver _already_ loaded.
+ */
+ request_module(MDIO_MODULE_PREFIX MDIO_ID_FMT, MDIO_ID_ARGS(phy_id));
+
+ device_initialize(&dev->dev);
+
+ return dev;
+}
+EXPORT_SYMBOL(phy_device_create);
+
+/**
+ * get_phy_c45_ids - reads the specified addr for its 802.3-c45 IDs.
+ * @bus: the target MII bus
+ * @addr: PHY address on the MII bus
+ * @phy_id: where to store the ID retrieved.
+ * @c45_ids: where to store the c45 ID information.
+ *
+ * If the PHY devices-in-package appears to be valid, it and the
+ * corresponding identifiers are stored in @c45_ids, zero is stored
+ * in @phy_id. Otherwise 0xffffffff is stored in @phy_id. Returns
+ * zero on success.
+ *
+ */
+static int get_phy_c45_ids(struct mii_bus *bus, int addr, u32 *phy_id,
+ struct phy_c45_device_ids *c45_ids) {
+ int phy_reg;
+ int i, reg_addr;
+ const int num_ids = ARRAY_SIZE(c45_ids->device_ids);
+
+ /* Find first non-zero Devices In package. Device
+ * zero is reserved, so don't probe it.
+ */
+ for (i = 1;
+ i < num_ids && c45_ids->devices_in_package == 0;
+ i++) {
+ reg_addr = MII_ADDR_C45 | i << 16 | MDIO_DEVS2;
+ phy_reg = mdiobus_read(bus, addr, reg_addr);
+ if (phy_reg < 0)
+ return -EIO;
+ c45_ids->devices_in_package = (phy_reg & 0xffff) << 16;
+
+ reg_addr = MII_ADDR_C45 | i << 16 | MDIO_DEVS1;
+ phy_reg = mdiobus_read(bus, addr, reg_addr);
+ if (phy_reg < 0)
+ return -EIO;
+ c45_ids->devices_in_package |= (phy_reg & 0xffff);
+
+ /* If mostly Fs, there is no device there,
+ * let's get out of here.
+ */
+ if ((c45_ids->devices_in_package & 0x1fffffff) == 0x1fffffff) {
+ *phy_id = 0xffffffff;
+ return 0;
+ }
+ }
+
+ /* Now probe Device Identifiers for each device present. */
+ for (i = 1; i < num_ids; i++) {
+ if (!(c45_ids->devices_in_package & (1 << i)))
+ continue;
+
+ reg_addr = MII_ADDR_C45 | i << 16 | MII_PHYSID1;
+ phy_reg = mdiobus_read(bus, addr, reg_addr);
+ if (phy_reg < 0)
+ return -EIO;
+ c45_ids->device_ids[i] = (phy_reg & 0xffff) << 16;
+
+ reg_addr = MII_ADDR_C45 | i << 16 | MII_PHYSID2;
+ phy_reg = mdiobus_read(bus, addr, reg_addr);
+ if (phy_reg < 0)
+ return -EIO;
+ c45_ids->device_ids[i] |= (phy_reg & 0xffff);
+ }
+ *phy_id = 0;
+ return 0;
+}
+
+/**
+ * get_phy_id - reads the specified addr for its ID.
+ * @bus: the target MII bus
+ * @addr: PHY address on the MII bus
+ * @phy_id: where to store the ID retrieved.
+ * @is_c45: If true the PHY uses the 802.3 clause 45 protocol
+ * @c45_ids: where to store the c45 ID information.
+ *
+ * Description: In the case of a 802.3-c22 PHY, reads the ID registers
+ * of the PHY at @addr on the @bus, stores it in @phy_id and returns
+ * zero on success.
+ *
+ * In the case of a 802.3-c45 PHY, get_phy_c45_ids() is invoked, and
+ * its return value is in turn returned.
+ *
+ */
+static int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id,
+ bool is_c45, struct phy_c45_device_ids *c45_ids)
+{
+ int phy_reg;
+
+ if (is_c45)
+ return get_phy_c45_ids(bus, addr, phy_id, c45_ids);
+
+ /* Grab the bits from PHYIR1, and put them in the upper half */
+ phy_reg = mdiobus_read(bus, addr, MII_PHYSID1);
+ if (phy_reg < 0)
+ return -EIO;
+
+ *phy_id = (phy_reg & 0xffff) << 16;
+
+ /* Grab the bits from PHYIR2, and put them in the lower half */
+ phy_reg = mdiobus_read(bus, addr, MII_PHYSID2);
+ if (phy_reg < 0)
+ return -EIO;
+
+ *phy_id |= (phy_reg & 0xffff);
+
+ return 0;
+}
+
+/**
+ * get_phy_device - reads the specified PHY device and returns its @phy_device
+ * struct
+ * @bus: the target MII bus
+ * @addr: PHY address on the MII bus
+ * @is_c45: If true the PHY uses the 802.3 clause 45 protocol
+ *
+ * Description: Reads the ID registers of the PHY at @addr on the
+ * @bus, then allocates and returns the phy_device to represent it.
+ */
+struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45)
+{
+ struct phy_c45_device_ids c45_ids = {0};
+ u32 phy_id = 0;
+ int r;
+
+ r = get_phy_id(bus, addr, &phy_id, is_c45, &c45_ids);
+ if (r)
+ return ERR_PTR(r);
+
+ /* If the phy_id is mostly Fs, there is no device there */
+ if ((phy_id & 0x1fffffff) == 0x1fffffff)
+ return NULL;
+
+ return phy_device_create(bus, addr, phy_id, is_c45, &c45_ids);
+}
+EXPORT_SYMBOL(get_phy_device);
+
+/**
+ * phy_device_register - Register the phy device on the MDIO bus
+ * @phydev: phy_device structure to be added to the MDIO bus
+ */
+int phy_device_register(struct phy_device *phydev)
+{
+ int err;
+
+ /* Don't register a phy if one is already registered at this address */
+ if (phydev->bus->phy_map[phydev->addr])
+ return -EINVAL;
+ phydev->bus->phy_map[phydev->addr] = phydev;
+
+ /* Run all of the fixups for this PHY */
+ err = phy_scan_fixups(phydev);
+ if (err) {
+ pr_err("PHY %d failed to initialize\n", phydev->addr);
+ goto out;
+ }
+
+ err = device_add(&phydev->dev);
+ if (err) {
+ pr_err("PHY %d failed to add\n", phydev->addr);
+ goto out;
+ }
+
+ return 0;
+
+ out:
+ phydev->bus->phy_map[phydev->addr] = NULL;
+ return err;
+}
+EXPORT_SYMBOL(phy_device_register);
+
+/**
+ * phy_find_first - finds the first PHY device on the bus
+ * @bus: the target MII bus
+ */
+struct phy_device *phy_find_first(struct mii_bus *bus)
+{
+ int addr;
+
+ for (addr = 0; addr < PHY_MAX_ADDR; addr++) {
+ if (bus->phy_map[addr])
+ return bus->phy_map[addr];
+ }
+ return NULL;
+}
+EXPORT_SYMBOL(phy_find_first);
+
+/**
+ * phy_prepare_link - prepares the PHY layer to monitor link status
+ * @phydev: target phy_device struct
+ * @handler: callback function for link status change notifications
+ *
+ * Description: Tells the PHY infrastructure to handle the
+ * gory details on monitoring link status (whether through
+ * polling or an interrupt), and to call back to the
+ * connected device driver when the link status changes.
+ * If you want to monitor your own link state, don't call
+ * this function.
+ */
+static void phy_prepare_link(struct phy_device *phydev,
+ void (*handler)(struct net_device *))
+{
+ phydev->adjust_link = handler;
+}
+
+/**
+ * phy_connect_direct - connect an ethernet device to a specific phy_device
+ * @dev: the network device to connect
+ * @phydev: the pointer to the phy device
+ * @handler: callback function for state change notifications
+ * @interface: PHY device's interface
+ */
+int phy_connect_direct(struct net_device *dev, struct phy_device *phydev,
+ void (*handler)(struct net_device *),
+ phy_interface_t interface)
+{
+ int rc;
+
+ rc = phy_attach_direct(dev, phydev, phydev->dev_flags, interface);
+ if (rc)
+ return rc;
+
+ phy_prepare_link(phydev, handler);
+ phy_start_machine(phydev);
+ if (phydev->irq > 0)
+ phy_start_interrupts(phydev);
+
+ return 0;
+}
+EXPORT_SYMBOL(phy_connect_direct);
+
+/**
+ * phy_connect - connect an ethernet device to a PHY device
+ * @dev: the network device to connect
+ * @bus_id: the id string of the PHY device to connect
+ * @handler: callback function for state change notifications
+ * @interface: PHY device's interface
+ *
+ * Description: Convenience function for connecting ethernet
+ * devices to PHY devices. The default behavior is for
+ * the PHY infrastructure to handle everything, and only notify
+ * the connected driver when the link status changes. If you
+ * don't want, or can't use the provided functionality, you may
+ * choose to call only the subset of functions which provide
+ * the desired functionality.
+ */
+struct phy_device *phy_connect(struct net_device *dev, const char *bus_id,
+ void (*handler)(struct net_device *),
+ phy_interface_t interface)
+{
+ struct phy_device *phydev;
+ struct device *d;
+ int rc;
+
+ /* Search the list of PHY devices on the mdio bus for the
+ * PHY with the requested name
+ */
+ d = bus_find_device_by_name(&mdio_bus_type, NULL, bus_id);
+ if (!d) {
+ pr_err("PHY %s not found\n", bus_id);
+ return ERR_PTR(-ENODEV);
+ }
+ phydev = to_phy_device(d);
+
+ rc = phy_connect_direct(dev, phydev, handler, interface);
+ if (rc)
+ return ERR_PTR(rc);
+
+ return phydev;
+}
+EXPORT_SYMBOL(phy_connect);
+
+/**
+ * phy_disconnect - disable interrupts, stop state machine, and detach a PHY
+ * device
+ * @phydev: target phy_device struct
+ */
+void phy_disconnect(struct phy_device *phydev)
+{
+ if (phydev->irq > 0)
+ phy_stop_interrupts(phydev);
+
+ phy_stop_machine(phydev);
+
+ phydev->adjust_link = NULL;
+
+ phy_detach(phydev);
+}
+EXPORT_SYMBOL(phy_disconnect);
+
+/**
+ * phy_poll_reset - Safely wait until a PHY reset has properly completed
+ * @phydev: The PHY device to poll
+ *
+ * Description: According to IEEE 802.3, Section 2, Subsection 22.2.4.1.1, as
+ * published in 2008, a PHY reset may take up to 0.5 seconds. The MII BMCR
+ * register must be polled until the BMCR_RESET bit clears.
+ *
+ * Furthermore, any attempts to write to PHY registers may have no effect
+ * or even generate MDIO bus errors until this is complete.
+ *
+ * Some PHYs (such as the Marvell 88E1111) don't entirely conform to the
+ * standard and do not fully reset after the BMCR_RESET bit is set, and may
+ * even *REQUIRE* a soft-reset to properly restart autonegotiation. In an
+ * effort to support such broken PHYs, this function is separate from the
+ * standard phy_init_hw() which will zero all the other bits in the BMCR
+ * and reapply all driver-specific and board-specific fixups.
+ */
+static int phy_poll_reset(struct phy_device *phydev)
+{
+ /* Poll until the reset bit clears (50ms per retry == 0.6 sec) */
+ unsigned int retries = 12;
+ int ret;
+
+ do {
+ msleep(50);
+ ret = phy_read(phydev, MII_BMCR);
+ if (ret < 0)
+ return ret;
+ } while (ret & BMCR_RESET && --retries);
+ if (ret & BMCR_RESET)
+ return -ETIMEDOUT;
+
+ /* Some chips (smsc911x) may still need up to another 1ms after the
+ * BMCR_RESET bit is cleared before they are usable.
+ */
+ msleep(1);
+ return 0;
+}
+
+int phy_init_hw(struct phy_device *phydev)
+{
+ int ret = 0;
+
+ if (!phydev->drv || !phydev->drv->config_init)
+ return 0;
+
+ if (phydev->drv->soft_reset)
+ ret = phydev->drv->soft_reset(phydev);
+ else
+ ret = genphy_soft_reset(phydev);
+
+ if (ret < 0)
+ return ret;
+
+ ret = phy_scan_fixups(phydev);
+ if (ret < 0)
+ return ret;
+
+ return phydev->drv->config_init(phydev);
+}
+EXPORT_SYMBOL(phy_init_hw);
+
+/**
+ * phy_attach_direct - attach a network device to a given PHY device pointer
+ * @dev: network device to attach
+ * @phydev: Pointer to phy_device to attach
+ * @flags: PHY device's dev_flags
+ * @interface: PHY device's interface
+ *
+ * Description: Called by drivers to attach to a particular PHY
+ * device. The phy_device is found, and properly hooked up
+ * to the phy_driver. If no driver is attached, then a
+ * generic driver is used. The phy_device is given a ptr to
+ * the attaching device, and given a callback for link status
+ * change. The phy_device is returned to the attaching driver.
+ */
+int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
+ u32 flags, phy_interface_t interface)
+{
+ struct device *d = &phydev->dev;
+ struct module *bus_module;
+ int err;
+
+ /* Assume that if there is no driver, that it doesn't
+ * exist, and we should use the genphy driver.
+ */
+ if (NULL == d->driver) {
+ if (phydev->is_c45)
+ d->driver = &genphy_driver[GENPHY_DRV_10G].driver;
+ else
+ d->driver = &genphy_driver[GENPHY_DRV_1G].driver;
+
+ err = d->driver->probe(d);
+ if (err >= 0)
+ err = device_bind_driver(d);
+
+ if (err)
+ return err;
+ }
+
+ if (phydev->attached_dev) {
+ dev_err(&dev->dev, "PHY already attached\n");
+ return -EBUSY;
+ }
+
+ /* Increment the bus module reference count */
+ bus_module = phydev->bus->dev.driver ?
+ phydev->bus->dev.driver->owner : NULL;
+ if (!try_module_get(bus_module)) {
+ dev_err(&dev->dev, "failed to get the bus module\n");
+ return -EIO;
+ }
+
+ phydev->attached_dev = dev;
+ dev->phydev = phydev;
+
+ phydev->dev_flags = flags;
+
+ phydev->interface = interface;
+
+ phydev->state = PHY_READY;
+
+ /* Do initial configuration here, now that
+ * we have certain key parameters
+ * (dev_flags and interface)
+ */
+ err = phy_init_hw(phydev);
+ if (err)
+ phy_detach(phydev);
+ else
+ phy_resume(phydev);
+
+ return err;
+}
+EXPORT_SYMBOL(phy_attach_direct);
+
+/**
+ * phy_attach - attach a network device to a particular PHY device
+ * @dev: network device to attach
+ * @bus_id: Bus ID of PHY device to attach
+ * @interface: PHY device's interface
+ *
+ * Description: Same as phy_attach_direct() except that a PHY bus_id
+ * string is passed instead of a pointer to a struct phy_device.
+ */
+struct phy_device *phy_attach(struct net_device *dev, const char *bus_id,
+ phy_interface_t interface)
+{
+ struct bus_type *bus = &mdio_bus_type;
+ struct phy_device *phydev;
+ struct device *d;
+ int rc;
+
+ /* Search the list of PHY devices on the mdio bus for the
+ * PHY with the requested name
+ */
+ d = bus_find_device_by_name(bus, NULL, bus_id);
+ if (!d) {
+ pr_err("PHY %s not found\n", bus_id);
+ return ERR_PTR(-ENODEV);
+ }
+ phydev = to_phy_device(d);
+
+ rc = phy_attach_direct(dev, phydev, phydev->dev_flags, interface);
+ if (rc)
+ return ERR_PTR(rc);
+
+ return phydev;
+}
+EXPORT_SYMBOL(phy_attach);
+
+/**
+ * phy_detach - detach a PHY device from its network device
+ * @phydev: target phy_device struct
+ */
+void phy_detach(struct phy_device *phydev)
+{
+ int i;
+
+ if (phydev->bus->dev.driver)
+ module_put(phydev->bus->dev.driver->owner);
+
+ phydev->attached_dev->phydev = NULL;
+ phydev->attached_dev = NULL;
+ phy_suspend(phydev);
+
+ /* If the device had no specific driver before (i.e. - it
+ * was using the generic driver), we unbind the device
+ * from the generic driver so that there's a chance a
+ * real driver could be loaded
+ */
+ for (i = 0; i < ARRAY_SIZE(genphy_driver); i++) {
+ if (phydev->dev.driver == &genphy_driver[i].driver) {
+ device_release_driver(&phydev->dev);
+ break;
+ }
+ }
+}
+EXPORT_SYMBOL(phy_detach);
+
+int phy_suspend(struct phy_device *phydev)
+{
+ struct phy_driver *phydrv = to_phy_driver(phydev->dev.driver);
+ struct ethtool_wolinfo wol = { .cmd = ETHTOOL_GWOL };
+ int ret = 0;
+
+ /* If the device has WOL enabled, we cannot suspend the PHY */
+ phy_ethtool_get_wol(phydev, &wol);
+ if (wol.wolopts)
+ return -EBUSY;
+
+ if (phydrv->suspend)
+ ret = phydrv->suspend(phydev);
+
+ if (ret)
+ return ret;
+
+ phydev->suspended = true;
+
+ return ret;
+}
+EXPORT_SYMBOL(phy_suspend);
+
+int phy_resume(struct phy_device *phydev)
+{
+ struct phy_driver *phydrv = to_phy_driver(phydev->dev.driver);
+ int ret = 0;
+
+ if (phydrv->resume)
+ ret = phydrv->resume(phydev);
+
+ if (ret)
+ return ret;
+
+ phydev->suspended = false;
+
+ return ret;
+}
+EXPORT_SYMBOL(phy_resume);
+
+/* Generic PHY support and helper functions */
+
+/**
+ * genphy_config_advert - sanitize and advertise auto-negotiation parameters
+ * @phydev: target phy_device struct
+ *
+ * Description: Writes MII_ADVERTISE with the appropriate values,
+ * after sanitizing the values to make sure we only advertise
+ * what is supported. Returns < 0 on error, 0 if the PHY's advertisement
+ * hasn't changed, and > 0 if it has changed.
+ */
+static int genphy_config_advert(struct phy_device *phydev)
+{
+ u32 advertise;
+ int oldadv, adv, bmsr;
+ int err, changed = 0;
+
+ /* Only allow advertising what this PHY supports */
+ phydev->advertising &= phydev->supported;
+ advertise = phydev->advertising;
+
+ /* Setup standard advertisement */
+ adv = phy_read(phydev, MII_ADVERTISE);
+ if (adv < 0)
+ return adv;
+
+ oldadv = adv;
+ adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4 | ADVERTISE_PAUSE_CAP |
+ ADVERTISE_PAUSE_ASYM);
+ adv |= ethtool_adv_to_mii_adv_t(advertise);
+
+ if (adv != oldadv) {
+ err = phy_write(phydev, MII_ADVERTISE, adv);
+
+ if (err < 0)
+ return err;
+ changed = 1;
+ }
+
+ bmsr = phy_read(phydev, MII_BMSR);
+ if (bmsr < 0)
+ return bmsr;
+
+ /* Per 802.3-2008, Section 22.2.4.2.16 Extended status all
+ * 1000Mbits/sec capable PHYs shall have the BMSR_ESTATEN bit set to a
+ * logical 1.
+ */
+ if (!(bmsr & BMSR_ESTATEN))
+ return changed;
+
+ /* Configure gigabit if it's supported */
+ adv = phy_read(phydev, MII_CTRL1000);
+ if (adv < 0)
+ return adv;
+
+ oldadv = adv;
+ adv &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF);
+
+ if (phydev->supported & (SUPPORTED_1000baseT_Half |
+ SUPPORTED_1000baseT_Full)) {
+ adv |= ethtool_adv_to_mii_ctrl1000_t(advertise);
+ }
+
+ if (adv != oldadv)
+ changed = 1;
+
+ err = phy_write(phydev, MII_CTRL1000, adv);
+ if (err < 0)
+ return err;
+
+ return changed;
+}
+
+/**
+ * genphy_setup_forced - configures/forces speed/duplex from @phydev
+ * @phydev: target phy_device struct
+ *
+ * Description: Configures MII_BMCR to force speed/duplex
+ * to the values in phydev. Assumes that the values are valid.
+ * Please see phy_sanitize_settings().
+ */
+int genphy_setup_forced(struct phy_device *phydev)
+{
+ int ctl = 0;
+
+ phydev->pause = 0;
+ phydev->asym_pause = 0;
+
+ if (SPEED_1000 == phydev->speed)
+ ctl |= BMCR_SPEED1000;
+ else if (SPEED_100 == phydev->speed)
+ ctl |= BMCR_SPEED100;
+
+ if (DUPLEX_FULL == phydev->duplex)
+ ctl |= BMCR_FULLDPLX;
+
+ return phy_write(phydev, MII_BMCR, ctl);
+}
+EXPORT_SYMBOL(genphy_setup_forced);
+
+/**
+ * genphy_restart_aneg - Enable and Restart Autonegotiation
+ * @phydev: target phy_device struct
+ */
+int genphy_restart_aneg(struct phy_device *phydev)
+{
+ int ctl = phy_read(phydev, MII_BMCR);
+
+ if (ctl < 0)
+ return ctl;
+
+ ctl |= BMCR_ANENABLE | BMCR_ANRESTART;
+
+ /* Don't isolate the PHY if we're negotiating */
+ ctl &= ~BMCR_ISOLATE;
+
+ return phy_write(phydev, MII_BMCR, ctl);
+}
+EXPORT_SYMBOL(genphy_restart_aneg);
+
+/**
+ * genphy_config_aneg - restart auto-negotiation or write BMCR
+ * @phydev: target phy_device struct
+ *
+ * Description: If auto-negotiation is enabled, we configure the
+ * advertising, and then restart auto-negotiation. If it is not
+ * enabled, then we write the BMCR.
+ */
+int genphy_config_aneg(struct phy_device *phydev)
+{
+ int result;
+
+ if (AUTONEG_ENABLE != phydev->autoneg)
+ return genphy_setup_forced(phydev);
+
+ result = genphy_config_advert(phydev);
+ if (result < 0) /* error */
+ return result;
+ if (result == 0) {
+ /* Advertisement hasn't changed, but maybe aneg was never on to
+ * begin with? Or maybe phy was isolated?
+ */
+ int ctl = phy_read(phydev, MII_BMCR);
+
+ if (ctl < 0)
+ return ctl;
+
+ if (!(ctl & BMCR_ANENABLE) || (ctl & BMCR_ISOLATE))
+ result = 1; /* do restart aneg */
+ }
+
+ /* Only restart aneg if we are advertising something different
+ * than we were before.
+ */
+ if (result > 0)
+ result = genphy_restart_aneg(phydev);
+
+ return result;
+}
+EXPORT_SYMBOL(genphy_config_aneg);
+
+/**
+ * genphy_aneg_done - return auto-negotiation status
+ * @phydev: target phy_device struct
+ *
+ * Description: Reads the status register and returns 0 either if
+ * auto-negotiation is incomplete, or if there was an error.
+ * Returns BMSR_ANEGCOMPLETE if auto-negotiation is done.
+ */
+int genphy_aneg_done(struct phy_device *phydev)
+{
+ int retval = phy_read(phydev, MII_BMSR);
+
+ return (retval < 0) ? retval : (retval & BMSR_ANEGCOMPLETE);
+}
+EXPORT_SYMBOL(genphy_aneg_done);
+
+static int gen10g_config_aneg(struct phy_device *phydev)
+{
+ return 0;
+}
+
+/**
+ * genphy_update_link - update link status in @phydev
+ * @phydev: target phy_device struct
+ *
+ * Description: Update the value in phydev->link to reflect the
+ * current link value. In order to do this, we need to read
+ * the status register twice, keeping the second value.
+ */
+int genphy_update_link(struct phy_device *phydev)
+{
+ int status;
+
+ /* Do a fake read */
+ status = phy_read(phydev, MII_BMSR);
+ if (status < 0)
+ return status;
+
+ /* Read link and autonegotiation status */
+ status = phy_read(phydev, MII_BMSR);
+ if (status < 0)
+ return status;
+
+ if ((status & BMSR_LSTATUS) == 0)
+ phydev->link = 0;
+ else
+ phydev->link = 1;
+
+ return 0;
+}
+EXPORT_SYMBOL(genphy_update_link);
+
+/**
+ * genphy_read_status - check the link status and update current link state
+ * @phydev: target phy_device struct
+ *
+ * Description: Check the link, then figure out the current state
+ * by comparing what we advertise with what the link partner
+ * advertises. Start by checking the gigabit possibilities,
+ * then move on to 10/100.
+ */
+int genphy_read_status(struct phy_device *phydev)
+{
+ int adv;
+ int err;
+ int lpa;
+ int lpagb = 0;
+ int common_adv;
+ int common_adv_gb = 0;
+
+ /* Update the link, but return if there was an error */
+ err = genphy_update_link(phydev);
+ if (err)
+ return err;
+
+ phydev->lp_advertising = 0;
+
+ if (AUTONEG_ENABLE == phydev->autoneg) {
+ if (phydev->supported & (SUPPORTED_1000baseT_Half
+ | SUPPORTED_1000baseT_Full)) {
+ lpagb = phy_read(phydev, MII_STAT1000);
+ if (lpagb < 0)
+ return lpagb;
+
+ adv = phy_read(phydev, MII_CTRL1000);
+ if (adv < 0)
+ return adv;
+
+ phydev->lp_advertising =
+ mii_stat1000_to_ethtool_lpa_t(lpagb);
+ common_adv_gb = lpagb & adv << 2;
+ }
+
+ lpa = phy_read(phydev, MII_LPA);
+ if (lpa < 0)
+ return lpa;
+
+ phydev->lp_advertising |= mii_lpa_to_ethtool_lpa_t(lpa);
+
+ adv = phy_read(phydev, MII_ADVERTISE);
+ if (adv < 0)
+ return adv;
+
+ common_adv = lpa & adv;
+
+ phydev->speed = SPEED_10;
+ phydev->duplex = DUPLEX_HALF;
+ phydev->pause = 0;
+ phydev->asym_pause = 0;
+
+ if (common_adv_gb & (LPA_1000FULL | LPA_1000HALF)) {
+ phydev->speed = SPEED_1000;
+
+ if (common_adv_gb & LPA_1000FULL)
+ phydev->duplex = DUPLEX_FULL;
+ } else if (common_adv & (LPA_100FULL | LPA_100HALF)) {
+ phydev->speed = SPEED_100;
+
+ if (common_adv & LPA_100FULL)
+ phydev->duplex = DUPLEX_FULL;
+ } else
+ if (common_adv & LPA_10FULL)
+ phydev->duplex = DUPLEX_FULL;
+
+ if (phydev->duplex == DUPLEX_FULL) {
+ phydev->pause = lpa & LPA_PAUSE_CAP ? 1 : 0;
+ phydev->asym_pause = lpa & LPA_PAUSE_ASYM ? 1 : 0;
+ }
+ } else {
+ int bmcr = phy_read(phydev, MII_BMCR);
+
+ if (bmcr < 0)
+ return bmcr;
+
+ if (bmcr & BMCR_FULLDPLX)
+ phydev->duplex = DUPLEX_FULL;
+ else
+ phydev->duplex = DUPLEX_HALF;
+
+ if (bmcr & BMCR_SPEED1000)
+ phydev->speed = SPEED_1000;
+ else if (bmcr & BMCR_SPEED100)
+ phydev->speed = SPEED_100;
+ else
+ phydev->speed = SPEED_10;
+
+ phydev->pause = 0;
+ phydev->asym_pause = 0;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(genphy_read_status);
+
+static int gen10g_read_status(struct phy_device *phydev)
+{
+ int devad, reg;
+ u32 mmd_mask = phydev->c45_ids.devices_in_package;
+
+ phydev->link = 1;
+
+ /* For now just lie and say it's 10G all the time */
+ phydev->speed = SPEED_10000;
+ phydev->duplex = DUPLEX_FULL;
+
+ for (devad = 0; mmd_mask; devad++, mmd_mask = mmd_mask >> 1) {
+ if (!(mmd_mask & 1))
+ continue;
+
+ /* Read twice because link state is latched and a
+ * read moves the current state into the register
+ */
+ phy_read_mmd(phydev, devad, MDIO_STAT1);
+ reg = phy_read_mmd(phydev, devad, MDIO_STAT1);
+ if (reg < 0 || !(reg & MDIO_STAT1_LSTATUS))
+ phydev->link = 0;
+ }
+
+ return 0;
+}
+
+/**
+ * genphy_soft_reset - software reset the PHY via BMCR_RESET bit
+ * @phydev: target phy_device struct
+ *
+ * Description: Perform a software PHY reset using the standard
+ * BMCR_RESET bit and poll for the reset bit to be cleared.
+ *
+ * Returns: 0 on success, < 0 on failure
+ */
+int genphy_soft_reset(struct phy_device *phydev)
+{
+ int ret;
+
+ ret = phy_write(phydev, MII_BMCR, BMCR_RESET);
+ if (ret < 0)
+ return ret;
+
+ return phy_poll_reset(phydev);
+}
+EXPORT_SYMBOL(genphy_soft_reset);
+
+int genphy_config_init(struct phy_device *phydev)
+{
+ int val;
+ u32 features;
+
+ features = (SUPPORTED_TP | SUPPORTED_MII
+ | SUPPORTED_AUI | SUPPORTED_FIBRE |
+ SUPPORTED_BNC);
+
+ /* Do we support autonegotiation? */
+ val = phy_read(phydev, MII_BMSR);
+ if (val < 0)
+ return val;
+
+ if (val & BMSR_ANEGCAPABLE)
+ features |= SUPPORTED_Autoneg;
+
+ if (val & BMSR_100FULL)
+ features |= SUPPORTED_100baseT_Full;
+ if (val & BMSR_100HALF)
+ features |= SUPPORTED_100baseT_Half;
+ if (val & BMSR_10FULL)
+ features |= SUPPORTED_10baseT_Full;
+ if (val & BMSR_10HALF)
+ features |= SUPPORTED_10baseT_Half;
+
+ if (val & BMSR_ESTATEN) {
+ val = phy_read(phydev, MII_ESTATUS);
+ if (val < 0)
+ return val;
+
+ if (val & ESTATUS_1000_TFULL)
+ features |= SUPPORTED_1000baseT_Full;
+ if (val & ESTATUS_1000_THALF)
+ features |= SUPPORTED_1000baseT_Half;
+ }
+
+ phydev->supported &= features;
+ phydev->advertising &= features;
+
+ return 0;
+}
+
+static int gen10g_soft_reset(struct phy_device *phydev)
+{
+ /* Do nothing for now */
+ return 0;
+}
+EXPORT_SYMBOL(genphy_config_init);
+
+static int gen10g_config_init(struct phy_device *phydev)
+{
+ /* Temporarily just say we support everything */
+ phydev->supported = SUPPORTED_10000baseT_Full;
+ phydev->advertising = SUPPORTED_10000baseT_Full;
+
+ return 0;
+}
+
+int genphy_suspend(struct phy_device *phydev)
+{
+ int value;
+
+ mutex_lock(&phydev->lock);
+
+ value = phy_read(phydev, MII_BMCR);
+ phy_write(phydev, MII_BMCR, value | BMCR_PDOWN);
+
+ mutex_unlock(&phydev->lock);
+
+ return 0;
+}
+EXPORT_SYMBOL(genphy_suspend);
+
+static int gen10g_suspend(struct phy_device *phydev)
+{
+ return 0;
+}
+
+int genphy_resume(struct phy_device *phydev)
+{
+ int value;
+
+ mutex_lock(&phydev->lock);
+
+ value = phy_read(phydev, MII_BMCR);
+ phy_write(phydev, MII_BMCR, value & ~BMCR_PDOWN);
+
+ mutex_unlock(&phydev->lock);
+
+ return 0;
+}
+EXPORT_SYMBOL(genphy_resume);
+
+static int gen10g_resume(struct phy_device *phydev)
+{
+ return 0;
+}
+
+static void of_set_phy_supported(struct phy_device *phydev)
+{
+ struct device_node *node = phydev->dev.of_node;
+ u32 max_speed;
+
+ if (!IS_ENABLED(CONFIG_OF_MDIO))
+ return;
+
+ if (!node)
+ return;
+
+ if (!of_property_read_u32(node, "max-speed", &max_speed)) {
+ /* The default values for phydev->supported are provided by the PHY
+ * driver "features" member, we want to reset to sane defaults fist
+ * before supporting higher speeds.
+ */
+ phydev->supported &= PHY_DEFAULT_FEATURES;
+
+ switch (max_speed) {
+ default:
+ return;
+
+ case SPEED_1000:
+ phydev->supported |= PHY_1000BT_FEATURES;
+ case SPEED_100:
+ phydev->supported |= PHY_100BT_FEATURES;
+ case SPEED_10:
+ phydev->supported |= PHY_10BT_FEATURES;
+ }
+ }
+}
+
+/**
+ * phy_probe - probe and init a PHY device
+ * @dev: device to probe and init
+ *
+ * Description: Take care of setting up the phy_device structure,
+ * set the state to READY (the driver's init function should
+ * set it to STARTING if needed).
+ */
+static int phy_probe(struct device *dev)
+{
+ struct phy_device *phydev = to_phy_device(dev);
+ struct device_driver *drv = phydev->dev.driver;
+ struct phy_driver *phydrv = to_phy_driver(drv);
+ int err = 0;
+
+ phydev->drv = phydrv;
+
+ /* Disable the interrupt if the PHY doesn't support it
+ * but the interrupt is still a valid one
+ */
+ if (!(phydrv->flags & PHY_HAS_INTERRUPT) &&
+ phy_interrupt_is_valid(phydev))
+ phydev->irq = PHY_POLL;
+
+ if (phydrv->flags & PHY_IS_INTERNAL)
+ phydev->is_internal = true;
+
+ mutex_lock(&phydev->lock);
+
+ /* Start out supporting everything. Eventually,
+ * a controller will attach, and may modify one
+ * or both of these values
+ */
+ phydev->supported = phydrv->features;
+ of_set_phy_supported(phydev);
+ phydev->advertising = phydev->supported;
+
+ /* Set the state to READY by default */
+ phydev->state = PHY_READY;
+
+ if (phydev->drv->probe)
+ err = phydev->drv->probe(phydev);
+
+ mutex_unlock(&phydev->lock);
+
+ return err;
+}
+
+static int phy_remove(struct device *dev)
+{
+ struct phy_device *phydev = to_phy_device(dev);
+
+ mutex_lock(&phydev->lock);
+ phydev->state = PHY_DOWN;
+ mutex_unlock(&phydev->lock);
+
+ if (phydev->drv->remove)
+ phydev->drv->remove(phydev);
+ phydev->drv = NULL;
+
+ return 0;
+}
+
+/**
+ * phy_driver_register - register a phy_driver with the PHY layer
+ * @new_driver: new phy_driver to register
+ */
+int phy_driver_register(struct phy_driver *new_driver)
+{
+ int retval;
+
+ new_driver->driver.name = new_driver->name;
+ new_driver->driver.bus = &mdio_bus_type;
+ new_driver->driver.probe = phy_probe;
+ new_driver->driver.remove = phy_remove;
+
+ retval = driver_register(&new_driver->driver);
+ if (retval) {
+ pr_err("%s: Error %d in registering driver\n",
+ new_driver->name, retval);
+
+ return retval;
+ }
+
+ pr_debug("%s: Registered new driver\n", new_driver->name);
+
+ return 0;
+}
+EXPORT_SYMBOL(phy_driver_register);
+
+int phy_drivers_register(struct phy_driver *new_driver, int n)
+{
+ int i, ret = 0;
+
+ for (i = 0; i < n; i++) {
+ ret = phy_driver_register(new_driver + i);
+ if (ret) {
+ while (i-- > 0)
+ phy_driver_unregister(new_driver + i);
+ break;
+ }
+ }
+ return ret;
+}
+EXPORT_SYMBOL(phy_drivers_register);
+
+void phy_driver_unregister(struct phy_driver *drv)
+{
+ driver_unregister(&drv->driver);
+}
+EXPORT_SYMBOL(phy_driver_unregister);
+
+void phy_drivers_unregister(struct phy_driver *drv, int n)
+{
+ int i;
+
+ for (i = 0; i < n; i++)
+ phy_driver_unregister(drv + i);
+}
+EXPORT_SYMBOL(phy_drivers_unregister);
+
+static struct phy_driver genphy_driver[] = {
+{
+ .phy_id = 0xffffffff,
+ .phy_id_mask = 0xffffffff,
+ .name = "Generic PHY",
+ .soft_reset = genphy_soft_reset,
+ .config_init = genphy_config_init,
+ .features = PHY_GBIT_FEATURES | SUPPORTED_MII |
+ SUPPORTED_AUI | SUPPORTED_FIBRE |
+ SUPPORTED_BNC,
+ .config_aneg = genphy_config_aneg,
+ .aneg_done = genphy_aneg_done,
+ .read_status = genphy_read_status,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ .driver = { .owner = THIS_MODULE, },
+}, {
+ .phy_id = 0xffffffff,
+ .phy_id_mask = 0xffffffff,
+ .name = "Generic 10G PHY",
+ .soft_reset = gen10g_soft_reset,
+ .config_init = gen10g_config_init,
+ .features = 0,
+ .config_aneg = gen10g_config_aneg,
+ .read_status = gen10g_read_status,
+ .suspend = gen10g_suspend,
+ .resume = gen10g_resume,
+ .driver = {.owner = THIS_MODULE, },
+} };
+
+static int __init phy_init(void)
+{
+ int rc;
+
+ rc = mdio_bus_init();
+ if (rc)
+ return rc;
+
+ rc = phy_drivers_register(genphy_driver,
+ ARRAY_SIZE(genphy_driver));
+ if (rc)
+ mdio_bus_exit();
+
+ return rc;
+}
+
+static void __exit phy_exit(void)
+{
+ phy_drivers_unregister(genphy_driver,
+ ARRAY_SIZE(genphy_driver));
+ mdio_bus_exit();
+}
+
+subsys_initcall(phy_init);
+module_exit(phy_exit);
diff --git a/kernel/drivers/net/phy/qsemi.c b/kernel/drivers/net/phy/qsemi.c
new file mode 100644
index 000000000..be4c6f7c3
--- /dev/null
+++ b/kernel/drivers/net/phy/qsemi.c
@@ -0,0 +1,135 @@
+/*
+ * drivers/net/phy/qsemi.c
+ *
+ * Driver for Quality Semiconductor PHYs
+ *
+ * Author: Andy Fleming
+ *
+ * Copyright (c) 2004 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/unistd.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+/* ------------------------------------------------------------------------- */
+/* The Quality Semiconductor QS6612 is used on the RPX CLLF */
+
+/* register definitions */
+
+#define MII_QS6612_MCR 17 /* Mode Control Register */
+#define MII_QS6612_FTR 27 /* Factory Test Register */
+#define MII_QS6612_MCO 28 /* Misc. Control Register */
+#define MII_QS6612_ISR 29 /* Interrupt Source Register */
+#define MII_QS6612_IMR 30 /* Interrupt Mask Register */
+#define MII_QS6612_IMR_INIT 0x003a
+#define MII_QS6612_PCR 31 /* 100BaseTx PHY Control Reg. */
+
+#define QS6612_PCR_AN_COMPLETE 0x1000
+#define QS6612_PCR_RLBEN 0x0200
+#define QS6612_PCR_DCREN 0x0100
+#define QS6612_PCR_4B5BEN 0x0040
+#define QS6612_PCR_TX_ISOLATE 0x0020
+#define QS6612_PCR_MLT3_DIS 0x0002
+#define QS6612_PCR_SCRM_DESCRM 0x0001
+
+MODULE_DESCRIPTION("Quality Semiconductor PHY driver");
+MODULE_AUTHOR("Andy Fleming");
+MODULE_LICENSE("GPL");
+
+/* Returns 0, unless there's a write error */
+static int qs6612_config_init(struct phy_device *phydev)
+{
+ /* The PHY powers up isolated on the RPX,
+ * so send a command to allow operation.
+ * XXX - My docs indicate this should be 0x0940
+ * ...or something. The current value sets three
+ * reserved bits, bit 11, which specifies it should be
+ * set to one, bit 10, which specifies it should be set
+ * to 0, and bit 7, which doesn't specify. However, my
+ * docs are preliminary, and I will leave it like this
+ * until someone more knowledgable corrects me or it.
+ * -- Andy Fleming
+ */
+ return phy_write(phydev, MII_QS6612_PCR, 0x0dc0);
+}
+
+static int qs6612_ack_interrupt(struct phy_device *phydev)
+{
+ int err;
+
+ err = phy_read(phydev, MII_QS6612_ISR);
+
+ if (err < 0)
+ return err;
+
+ err = phy_read(phydev, MII_BMSR);
+
+ if (err < 0)
+ return err;
+
+ err = phy_read(phydev, MII_EXPANSION);
+
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+static int qs6612_config_intr(struct phy_device *phydev)
+{
+ int err;
+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+ err = phy_write(phydev, MII_QS6612_IMR,
+ MII_QS6612_IMR_INIT);
+ else
+ err = phy_write(phydev, MII_QS6612_IMR, 0);
+
+ return err;
+
+}
+
+static struct phy_driver qs6612_driver[] = { {
+ .phy_id = 0x00181440,
+ .name = "QS6612",
+ .phy_id_mask = 0xfffffff0,
+ .features = PHY_BASIC_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = qs6612_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = qs6612_ack_interrupt,
+ .config_intr = qs6612_config_intr,
+ .driver = { .owner = THIS_MODULE,},
+} };
+
+module_phy_driver(qs6612_driver);
+
+static struct mdio_device_id __maybe_unused qs6612_tbl[] = {
+ { 0x00181440, 0xfffffff0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(mdio, qs6612_tbl);
diff --git a/kernel/drivers/net/phy/realtek.c b/kernel/drivers/net/phy/realtek.c
new file mode 100644
index 000000000..96a0f0fab
--- /dev/null
+++ b/kernel/drivers/net/phy/realtek.c
@@ -0,0 +1,112 @@
+/*
+ * drivers/net/phy/realtek.c
+ *
+ * Driver for Realtek PHYs
+ *
+ * Author: Johnson Leung <r58129@freescale.com>
+ *
+ * Copyright (c) 2004 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/phy.h>
+#include <linux/module.h>
+
+#define RTL821x_PHYSR 0x11
+#define RTL821x_PHYSR_DUPLEX 0x2000
+#define RTL821x_PHYSR_SPEED 0xc000
+#define RTL821x_INER 0x12
+#define RTL821x_INER_INIT 0x6400
+#define RTL821x_INSR 0x13
+
+#define RTL8211E_INER_LINK_STATUS 0x400
+
+MODULE_DESCRIPTION("Realtek PHY driver");
+MODULE_AUTHOR("Johnson Leung");
+MODULE_LICENSE("GPL");
+
+static int rtl821x_ack_interrupt(struct phy_device *phydev)
+{
+ int err;
+
+ err = phy_read(phydev, RTL821x_INSR);
+
+ return (err < 0) ? err : 0;
+}
+
+static int rtl8211b_config_intr(struct phy_device *phydev)
+{
+ int err;
+
+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+ err = phy_write(phydev, RTL821x_INER,
+ RTL821x_INER_INIT);
+ else
+ err = phy_write(phydev, RTL821x_INER, 0);
+
+ return err;
+}
+
+static int rtl8211e_config_intr(struct phy_device *phydev)
+{
+ int err;
+
+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+ err = phy_write(phydev, RTL821x_INER,
+ RTL8211E_INER_LINK_STATUS);
+ else
+ err = phy_write(phydev, RTL821x_INER, 0);
+
+ return err;
+}
+
+static struct phy_driver realtek_drvs[] = {
+ {
+ .phy_id = 0x00008201,
+ .name = "RTL8201CP Ethernet",
+ .phy_id_mask = 0x0000ffff,
+ .features = PHY_BASIC_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_aneg = &genphy_config_aneg,
+ .read_status = &genphy_read_status,
+ .driver = { .owner = THIS_MODULE,},
+ }, {
+ .phy_id = 0x001cc912,
+ .name = "RTL8211B Gigabit Ethernet",
+ .phy_id_mask = 0x001fffff,
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_aneg = &genphy_config_aneg,
+ .read_status = &genphy_read_status,
+ .ack_interrupt = &rtl821x_ack_interrupt,
+ .config_intr = &rtl8211b_config_intr,
+ .driver = { .owner = THIS_MODULE,},
+ }, {
+ .phy_id = 0x001cc915,
+ .name = "RTL8211E Gigabit Ethernet",
+ .phy_id_mask = 0x001fffff,
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_aneg = &genphy_config_aneg,
+ .read_status = &genphy_read_status,
+ .ack_interrupt = &rtl821x_ack_interrupt,
+ .config_intr = &rtl8211e_config_intr,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ .driver = { .owner = THIS_MODULE,},
+ },
+};
+
+module_phy_driver(realtek_drvs);
+
+static struct mdio_device_id __maybe_unused realtek_tbl[] = {
+ { 0x001cc912, 0x001fffff },
+ { 0x001cc915, 0x001fffff },
+ { }
+};
+
+MODULE_DEVICE_TABLE(mdio, realtek_tbl);
diff --git a/kernel/drivers/net/phy/smsc.c b/kernel/drivers/net/phy/smsc.c
new file mode 100644
index 000000000..c0f6479e1
--- /dev/null
+++ b/kernel/drivers/net/phy/smsc.c
@@ -0,0 +1,268 @@
+/*
+ * drivers/net/phy/smsc.c
+ *
+ * Driver for SMSC PHYs
+ *
+ * Author: Herbert Valerio Riedel
+ *
+ * Copyright (c) 2006 Herbert Valerio Riedel <hvr@gnu.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * Support added for SMSC LAN8187 and LAN8700 by steve.glendinning@shawell.net
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+#include <linux/netdevice.h>
+#include <linux/smscphy.h>
+
+static int smsc_phy_config_intr(struct phy_device *phydev)
+{
+ int rc = phy_write (phydev, MII_LAN83C185_IM,
+ ((PHY_INTERRUPT_ENABLED == phydev->interrupts)
+ ? MII_LAN83C185_ISF_INT_PHYLIB_EVENTS
+ : 0));
+
+ return rc < 0 ? rc : 0;
+}
+
+static int smsc_phy_ack_interrupt(struct phy_device *phydev)
+{
+ int rc = phy_read (phydev, MII_LAN83C185_ISF);
+
+ return rc < 0 ? rc : 0;
+}
+
+static int smsc_phy_config_init(struct phy_device *phydev)
+{
+ int rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
+
+ if (rc < 0)
+ return rc;
+
+ /* Enable energy detect mode for this SMSC Transceivers */
+ rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS,
+ rc | MII_LAN83C185_EDPWRDOWN);
+ if (rc < 0)
+ return rc;
+
+ return smsc_phy_ack_interrupt(phydev);
+}
+
+static int smsc_phy_reset(struct phy_device *phydev)
+{
+ int rc = phy_read(phydev, MII_LAN83C185_SPECIAL_MODES);
+ if (rc < 0)
+ return rc;
+
+ /* If the SMSC PHY is in power down mode, then set it
+ * in all capable mode before using it.
+ */
+ if ((rc & MII_LAN83C185_MODE_MASK) == MII_LAN83C185_MODE_POWERDOWN) {
+ int timeout = 50000;
+
+ /* set "all capable" mode and reset the phy */
+ rc |= MII_LAN83C185_MODE_ALL;
+ phy_write(phydev, MII_LAN83C185_SPECIAL_MODES, rc);
+ phy_write(phydev, MII_BMCR, BMCR_RESET);
+
+ /* wait end of reset (max 500 ms) */
+ do {
+ udelay(10);
+ if (timeout-- == 0)
+ return -1;
+ rc = phy_read(phydev, MII_BMCR);
+ } while (rc & BMCR_RESET);
+ }
+ return 0;
+}
+
+static int lan911x_config_init(struct phy_device *phydev)
+{
+ return smsc_phy_ack_interrupt(phydev);
+}
+
+/*
+ * The LAN8710/LAN8720 requires a minimum of 2 link pulses within 64ms of each
+ * other in order to set the ENERGYON bit and exit EDPD mode. If a link partner
+ * does send the pulses within this interval, the PHY will remained powered
+ * down.
+ *
+ * This workaround will manually toggle the PHY on/off upon calls to read_status
+ * in order to generate link test pulses if the link is down. If a link partner
+ * is present, it will respond to the pulses, which will cause the ENERGYON bit
+ * to be set and will cause the EDPD mode to be exited.
+ */
+static int lan87xx_read_status(struct phy_device *phydev)
+{
+ int err = genphy_read_status(phydev);
+
+ if (!phydev->link) {
+ /* Disable EDPD to wake up PHY */
+ int rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
+ if (rc < 0)
+ return rc;
+
+ rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS,
+ rc & ~MII_LAN83C185_EDPWRDOWN);
+ if (rc < 0)
+ return rc;
+
+ /* Sleep 64 ms to allow ~5 link test pulses to be sent */
+ msleep(64);
+
+ /* Re-enable EDPD */
+ rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
+ if (rc < 0)
+ return rc;
+
+ rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS,
+ rc | MII_LAN83C185_EDPWRDOWN);
+ if (rc < 0)
+ return rc;
+ }
+
+ return err;
+}
+
+static struct phy_driver smsc_phy_driver[] = {
+{
+ .phy_id = 0x0007c0a0, /* OUI=0x00800f, Model#=0x0a */
+ .phy_id_mask = 0xfffffff0,
+ .name = "SMSC LAN83C185",
+
+ .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause
+ | SUPPORTED_Asym_Pause),
+ .flags = PHY_HAS_INTERRUPT | PHY_HAS_MAGICANEG,
+
+ /* basic functions */
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .config_init = smsc_phy_config_init,
+ .soft_reset = smsc_phy_reset,
+
+ /* IRQ related */
+ .ack_interrupt = smsc_phy_ack_interrupt,
+ .config_intr = smsc_phy_config_intr,
+
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+
+ .driver = { .owner = THIS_MODULE, }
+}, {
+ .phy_id = 0x0007c0b0, /* OUI=0x00800f, Model#=0x0b */
+ .phy_id_mask = 0xfffffff0,
+ .name = "SMSC LAN8187",
+
+ .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause
+ | SUPPORTED_Asym_Pause),
+ .flags = PHY_HAS_INTERRUPT | PHY_HAS_MAGICANEG,
+
+ /* basic functions */
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .config_init = smsc_phy_config_init,
+ .soft_reset = smsc_phy_reset,
+
+ /* IRQ related */
+ .ack_interrupt = smsc_phy_ack_interrupt,
+ .config_intr = smsc_phy_config_intr,
+
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+
+ .driver = { .owner = THIS_MODULE, }
+}, {
+ .phy_id = 0x0007c0c0, /* OUI=0x00800f, Model#=0x0c */
+ .phy_id_mask = 0xfffffff0,
+ .name = "SMSC LAN8700",
+
+ .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause
+ | SUPPORTED_Asym_Pause),
+ .flags = PHY_HAS_INTERRUPT | PHY_HAS_MAGICANEG,
+
+ /* basic functions */
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .config_init = smsc_phy_config_init,
+ .soft_reset = smsc_phy_reset,
+
+ /* IRQ related */
+ .ack_interrupt = smsc_phy_ack_interrupt,
+ .config_intr = smsc_phy_config_intr,
+
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+
+ .driver = { .owner = THIS_MODULE, }
+}, {
+ .phy_id = 0x0007c0d0, /* OUI=0x00800f, Model#=0x0d */
+ .phy_id_mask = 0xfffffff0,
+ .name = "SMSC LAN911x Internal PHY",
+
+ .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause
+ | SUPPORTED_Asym_Pause),
+ .flags = PHY_HAS_INTERRUPT | PHY_HAS_MAGICANEG,
+
+ /* basic functions */
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .config_init = lan911x_config_init,
+
+ /* IRQ related */
+ .ack_interrupt = smsc_phy_ack_interrupt,
+ .config_intr = smsc_phy_config_intr,
+
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+
+ .driver = { .owner = THIS_MODULE, }
+}, {
+ .phy_id = 0x0007c0f0, /* OUI=0x00800f, Model#=0x0f */
+ .phy_id_mask = 0xfffffff0,
+ .name = "SMSC LAN8710/LAN8720",
+
+ .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause
+ | SUPPORTED_Asym_Pause),
+ .flags = PHY_HAS_INTERRUPT | PHY_HAS_MAGICANEG,
+
+ /* basic functions */
+ .config_aneg = genphy_config_aneg,
+ .read_status = lan87xx_read_status,
+ .config_init = smsc_phy_config_init,
+ .soft_reset = smsc_phy_reset,
+
+ /* IRQ related */
+ .ack_interrupt = smsc_phy_ack_interrupt,
+ .config_intr = smsc_phy_config_intr,
+
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+
+ .driver = { .owner = THIS_MODULE, }
+} };
+
+module_phy_driver(smsc_phy_driver);
+
+MODULE_DESCRIPTION("SMSC PHY driver");
+MODULE_AUTHOR("Herbert Valerio Riedel");
+MODULE_LICENSE("GPL");
+
+static struct mdio_device_id __maybe_unused smsc_tbl[] = {
+ { 0x0007c0a0, 0xfffffff0 },
+ { 0x0007c0b0, 0xfffffff0 },
+ { 0x0007c0c0, 0xfffffff0 },
+ { 0x0007c0d0, 0xfffffff0 },
+ { 0x0007c0f0, 0xfffffff0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(mdio, smsc_tbl);
diff --git a/kernel/drivers/net/phy/spi_ks8995.c b/kernel/drivers/net/phy/spi_ks8995.c
new file mode 100644
index 000000000..465301592
--- /dev/null
+++ b/kernel/drivers/net/phy/spi_ks8995.c
@@ -0,0 +1,379 @@
+/*
+ * SPI driver for Micrel/Kendin KS8995M and KSZ8864RMN ethernet switches
+ *
+ * Copyright (C) 2008 Gabor Juhos <juhosg at openwrt.org>
+ *
+ * This file was based on: drivers/spi/at25.c
+ * Copyright (C) 2006 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+
+#include <linux/spi/spi.h>
+
+#define DRV_VERSION "0.1.1"
+#define DRV_DESC "Micrel KS8995 Ethernet switch SPI driver"
+
+/* ------------------------------------------------------------------------ */
+
+#define KS8995_REG_ID0 0x00 /* Chip ID0 */
+#define KS8995_REG_ID1 0x01 /* Chip ID1 */
+
+#define KS8995_REG_GC0 0x02 /* Global Control 0 */
+#define KS8995_REG_GC1 0x03 /* Global Control 1 */
+#define KS8995_REG_GC2 0x04 /* Global Control 2 */
+#define KS8995_REG_GC3 0x05 /* Global Control 3 */
+#define KS8995_REG_GC4 0x06 /* Global Control 4 */
+#define KS8995_REG_GC5 0x07 /* Global Control 5 */
+#define KS8995_REG_GC6 0x08 /* Global Control 6 */
+#define KS8995_REG_GC7 0x09 /* Global Control 7 */
+#define KS8995_REG_GC8 0x0a /* Global Control 8 */
+#define KS8995_REG_GC9 0x0b /* Global Control 9 */
+
+#define KS8995_REG_PC(p, r) ((0x10 * p) + r) /* Port Control */
+#define KS8995_REG_PS(p, r) ((0x10 * p) + r + 0xe) /* Port Status */
+
+#define KS8995_REG_TPC0 0x60 /* TOS Priority Control 0 */
+#define KS8995_REG_TPC1 0x61 /* TOS Priority Control 1 */
+#define KS8995_REG_TPC2 0x62 /* TOS Priority Control 2 */
+#define KS8995_REG_TPC3 0x63 /* TOS Priority Control 3 */
+#define KS8995_REG_TPC4 0x64 /* TOS Priority Control 4 */
+#define KS8995_REG_TPC5 0x65 /* TOS Priority Control 5 */
+#define KS8995_REG_TPC6 0x66 /* TOS Priority Control 6 */
+#define KS8995_REG_TPC7 0x67 /* TOS Priority Control 7 */
+
+#define KS8995_REG_MAC0 0x68 /* MAC address 0 */
+#define KS8995_REG_MAC1 0x69 /* MAC address 1 */
+#define KS8995_REG_MAC2 0x6a /* MAC address 2 */
+#define KS8995_REG_MAC3 0x6b /* MAC address 3 */
+#define KS8995_REG_MAC4 0x6c /* MAC address 4 */
+#define KS8995_REG_MAC5 0x6d /* MAC address 5 */
+
+#define KS8995_REG_IAC0 0x6e /* Indirect Access Control 0 */
+#define KS8995_REG_IAC1 0x6f /* Indirect Access Control 0 */
+#define KS8995_REG_IAD7 0x70 /* Indirect Access Data 7 */
+#define KS8995_REG_IAD6 0x71 /* Indirect Access Data 6 */
+#define KS8995_REG_IAD5 0x72 /* Indirect Access Data 5 */
+#define KS8995_REG_IAD4 0x73 /* Indirect Access Data 4 */
+#define KS8995_REG_IAD3 0x74 /* Indirect Access Data 3 */
+#define KS8995_REG_IAD2 0x75 /* Indirect Access Data 2 */
+#define KS8995_REG_IAD1 0x76 /* Indirect Access Data 1 */
+#define KS8995_REG_IAD0 0x77 /* Indirect Access Data 0 */
+
+#define KSZ8864_REG_ID1 0xfe /* Chip ID in bit 7 */
+
+#define KS8995_REGS_SIZE 0x80
+#define KSZ8864_REGS_SIZE 0x100
+
+#define ID1_CHIPID_M 0xf
+#define ID1_CHIPID_S 4
+#define ID1_REVISION_M 0x7
+#define ID1_REVISION_S 1
+#define ID1_START_SW 1 /* start the switch */
+
+#define FAMILY_KS8995 0x95
+#define CHIPID_M 0
+
+#define KS8995_CMD_WRITE 0x02U
+#define KS8995_CMD_READ 0x03U
+
+#define KS8995_RESET_DELAY 10 /* usec */
+
+struct ks8995_pdata {
+ /* not yet implemented */
+};
+
+struct ks8995_switch {
+ struct spi_device *spi;
+ struct mutex lock;
+ struct ks8995_pdata *pdata;
+ struct bin_attribute regs_attr;
+};
+
+static inline u8 get_chip_id(u8 val)
+{
+ return (val >> ID1_CHIPID_S) & ID1_CHIPID_M;
+}
+
+static inline u8 get_chip_rev(u8 val)
+{
+ return (val >> ID1_REVISION_S) & ID1_REVISION_M;
+}
+
+/* ------------------------------------------------------------------------ */
+static int ks8995_read(struct ks8995_switch *ks, char *buf,
+ unsigned offset, size_t count)
+{
+ u8 cmd[2];
+ struct spi_transfer t[2];
+ struct spi_message m;
+ int err;
+
+ spi_message_init(&m);
+
+ memset(&t, 0, sizeof(t));
+
+ t[0].tx_buf = cmd;
+ t[0].len = sizeof(cmd);
+ spi_message_add_tail(&t[0], &m);
+
+ t[1].rx_buf = buf;
+ t[1].len = count;
+ spi_message_add_tail(&t[1], &m);
+
+ cmd[0] = KS8995_CMD_READ;
+ cmd[1] = offset;
+
+ mutex_lock(&ks->lock);
+ err = spi_sync(ks->spi, &m);
+ mutex_unlock(&ks->lock);
+
+ return err ? err : count;
+}
+
+
+static int ks8995_write(struct ks8995_switch *ks, char *buf,
+ unsigned offset, size_t count)
+{
+ u8 cmd[2];
+ struct spi_transfer t[2];
+ struct spi_message m;
+ int err;
+
+ spi_message_init(&m);
+
+ memset(&t, 0, sizeof(t));
+
+ t[0].tx_buf = cmd;
+ t[0].len = sizeof(cmd);
+ spi_message_add_tail(&t[0], &m);
+
+ t[1].tx_buf = buf;
+ t[1].len = count;
+ spi_message_add_tail(&t[1], &m);
+
+ cmd[0] = KS8995_CMD_WRITE;
+ cmd[1] = offset;
+
+ mutex_lock(&ks->lock);
+ err = spi_sync(ks->spi, &m);
+ mutex_unlock(&ks->lock);
+
+ return err ? err : count;
+}
+
+static inline int ks8995_read_reg(struct ks8995_switch *ks, u8 addr, u8 *buf)
+{
+ return ks8995_read(ks, buf, addr, 1) != 1;
+}
+
+static inline int ks8995_write_reg(struct ks8995_switch *ks, u8 addr, u8 val)
+{
+ char buf = val;
+
+ return ks8995_write(ks, &buf, addr, 1) != 1;
+}
+
+/* ------------------------------------------------------------------------ */
+
+static int ks8995_stop(struct ks8995_switch *ks)
+{
+ return ks8995_write_reg(ks, KS8995_REG_ID1, 0);
+}
+
+static int ks8995_start(struct ks8995_switch *ks)
+{
+ return ks8995_write_reg(ks, KS8995_REG_ID1, 1);
+}
+
+static int ks8995_reset(struct ks8995_switch *ks)
+{
+ int err;
+
+ err = ks8995_stop(ks);
+ if (err)
+ return err;
+
+ udelay(KS8995_RESET_DELAY);
+
+ return ks8995_start(ks);
+}
+
+/* ------------------------------------------------------------------------ */
+
+static ssize_t ks8995_registers_read(struct file *filp, struct kobject *kobj,
+ struct bin_attribute *bin_attr, char *buf, loff_t off, size_t count)
+{
+ struct device *dev;
+ struct ks8995_switch *ks8995;
+
+ dev = container_of(kobj, struct device, kobj);
+ ks8995 = dev_get_drvdata(dev);
+
+ if (unlikely(off > ks8995->regs_attr.size))
+ return 0;
+
+ if ((off + count) > ks8995->regs_attr.size)
+ count = ks8995->regs_attr.size - off;
+
+ if (unlikely(!count))
+ return count;
+
+ return ks8995_read(ks8995, buf, off, count);
+}
+
+
+static ssize_t ks8995_registers_write(struct file *filp, struct kobject *kobj,
+ struct bin_attribute *bin_attr, char *buf, loff_t off, size_t count)
+{
+ struct device *dev;
+ struct ks8995_switch *ks8995;
+
+ dev = container_of(kobj, struct device, kobj);
+ ks8995 = dev_get_drvdata(dev);
+
+ if (unlikely(off >= ks8995->regs_attr.size))
+ return -EFBIG;
+
+ if ((off + count) > ks8995->regs_attr.size)
+ count = ks8995->regs_attr.size - off;
+
+ if (unlikely(!count))
+ return count;
+
+ return ks8995_write(ks8995, buf, off, count);
+}
+
+
+static const struct bin_attribute ks8995_registers_attr = {
+ .attr = {
+ .name = "registers",
+ .mode = S_IRUSR | S_IWUSR,
+ },
+ .size = KS8995_REGS_SIZE,
+ .read = ks8995_registers_read,
+ .write = ks8995_registers_write,
+};
+
+/* ------------------------------------------------------------------------ */
+
+static int ks8995_probe(struct spi_device *spi)
+{
+ struct ks8995_switch *ks;
+ struct ks8995_pdata *pdata;
+ u8 ids[2];
+ int err;
+
+ /* Chip description */
+ pdata = spi->dev.platform_data;
+
+ ks = devm_kzalloc(&spi->dev, sizeof(*ks), GFP_KERNEL);
+ if (!ks)
+ return -ENOMEM;
+
+ mutex_init(&ks->lock);
+ ks->pdata = pdata;
+ ks->spi = spi_dev_get(spi);
+ spi_set_drvdata(spi, ks);
+
+ spi->mode = SPI_MODE_0;
+ spi->bits_per_word = 8;
+ err = spi_setup(spi);
+ if (err) {
+ dev_err(&spi->dev, "spi_setup failed, err=%d\n", err);
+ return err;
+ }
+
+ err = ks8995_read(ks, ids, KS8995_REG_ID0, sizeof(ids));
+ if (err < 0) {
+ dev_err(&spi->dev, "unable to read id registers, err=%d\n",
+ err);
+ return err;
+ }
+
+ switch (ids[0]) {
+ case FAMILY_KS8995:
+ break;
+ default:
+ dev_err(&spi->dev, "unknown family id:%02x\n", ids[0]);
+ return -ENODEV;
+ }
+
+ memcpy(&ks->regs_attr, &ks8995_registers_attr, sizeof(ks->regs_attr));
+ if (get_chip_id(ids[1]) != CHIPID_M) {
+ u8 val;
+
+ /* Check if this is a KSZ8864RMN */
+ err = ks8995_read(ks, &val, KSZ8864_REG_ID1, sizeof(val));
+ if (err < 0) {
+ dev_err(&spi->dev,
+ "unable to read chip id register, err=%d\n",
+ err);
+ return err;
+ }
+ if ((val & 0x80) == 0) {
+ dev_err(&spi->dev, "unknown chip:%02x,0\n", ids[1]);
+ return err;
+ }
+ ks->regs_attr.size = KSZ8864_REGS_SIZE;
+ }
+
+ err = ks8995_reset(ks);
+ if (err)
+ return err;
+
+ err = sysfs_create_bin_file(&spi->dev.kobj, &ks->regs_attr);
+ if (err) {
+ dev_err(&spi->dev, "unable to create sysfs file, err=%d\n",
+ err);
+ return err;
+ }
+
+ if (get_chip_id(ids[1]) == CHIPID_M) {
+ dev_info(&spi->dev,
+ "KS8995 device found, Chip ID:%x, Revision:%x\n",
+ get_chip_id(ids[1]), get_chip_rev(ids[1]));
+ } else {
+ dev_info(&spi->dev, "KSZ8864 device found, Revision:%x\n",
+ get_chip_rev(ids[1]));
+ }
+
+ return 0;
+}
+
+static int ks8995_remove(struct spi_device *spi)
+{
+ struct ks8995_switch *ks = spi_get_drvdata(spi);
+
+ sysfs_remove_bin_file(&spi->dev.kobj, &ks->regs_attr);
+
+ return 0;
+}
+
+/* ------------------------------------------------------------------------ */
+
+static struct spi_driver ks8995_driver = {
+ .driver = {
+ .name = "spi-ks8995",
+ .owner = THIS_MODULE,
+ },
+ .probe = ks8995_probe,
+ .remove = ks8995_remove,
+};
+
+module_spi_driver(ks8995_driver);
+
+MODULE_DESCRIPTION(DRV_DESC);
+MODULE_VERSION(DRV_VERSION);
+MODULE_AUTHOR("Gabor Juhos <juhosg at openwrt.org>");
+MODULE_LICENSE("GPL v2");
diff --git a/kernel/drivers/net/phy/ste10Xp.c b/kernel/drivers/net/phy/ste10Xp.c
new file mode 100644
index 000000000..3fc199b77
--- /dev/null
+++ b/kernel/drivers/net/phy/ste10Xp.c
@@ -0,0 +1,127 @@
+/*
+ * drivers/net/phy/ste10Xp.c
+ *
+ * Driver for STMicroelectronics STe10Xp PHYs
+ *
+ * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+ *
+ * Copyright (c) 2008 STMicroelectronics Limited
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/moduleparam.h>
+#include <linux/interrupt.h>
+#include <linux/netdevice.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/phy.h>
+
+#define MII_XCIIS 0x11 /* Configuration Info IRQ & Status Reg */
+#define MII_XIE 0x12 /* Interrupt Enable Register */
+#define MII_XIE_DEFAULT_MASK 0x0070 /* ANE complete, Remote Fault, Link Down */
+
+#define STE101P_PHY_ID 0x00061c50
+#define STE100P_PHY_ID 0x1c040011
+
+static int ste10Xp_config_init(struct phy_device *phydev)
+{
+ int value, err;
+
+ /* Software Reset PHY */
+ value = phy_read(phydev, MII_BMCR);
+ if (value < 0)
+ return value;
+
+ value |= BMCR_RESET;
+ err = phy_write(phydev, MII_BMCR, value);
+ if (err < 0)
+ return err;
+
+ do {
+ value = phy_read(phydev, MII_BMCR);
+ } while (value & BMCR_RESET);
+
+ return 0;
+}
+
+static int ste10Xp_config_intr(struct phy_device *phydev)
+{
+ int err, value;
+
+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+ /* Enable all STe101P interrupts (PR12) */
+ err = phy_write(phydev, MII_XIE, MII_XIE_DEFAULT_MASK);
+ /* clear any pending interrupts */
+ if (err == 0) {
+ value = phy_read(phydev, MII_XCIIS);
+ if (value < 0)
+ err = value;
+ }
+ } else
+ err = phy_write(phydev, MII_XIE, 0);
+
+ return err;
+}
+
+static int ste10Xp_ack_interrupt(struct phy_device *phydev)
+{
+ int err = phy_read(phydev, MII_XCIIS);
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+static struct phy_driver ste10xp_pdriver[] = {
+{
+ .phy_id = STE101P_PHY_ID,
+ .phy_id_mask = 0xfffffff0,
+ .name = "STe101p",
+ .features = PHY_BASIC_FEATURES | SUPPORTED_Pause,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = ste10Xp_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = ste10Xp_ack_interrupt,
+ .config_intr = ste10Xp_config_intr,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ .driver = {.owner = THIS_MODULE,}
+}, {
+ .phy_id = STE100P_PHY_ID,
+ .phy_id_mask = 0xffffffff,
+ .name = "STe100p",
+ .features = PHY_BASIC_FEATURES | SUPPORTED_Pause,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = ste10Xp_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = ste10Xp_ack_interrupt,
+ .config_intr = ste10Xp_config_intr,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ .driver = {.owner = THIS_MODULE,}
+} };
+
+module_phy_driver(ste10xp_pdriver);
+
+static struct mdio_device_id __maybe_unused ste10Xp_tbl[] = {
+ { STE101P_PHY_ID, 0xfffffff0 },
+ { STE100P_PHY_ID, 0xffffffff },
+ { }
+};
+
+MODULE_DEVICE_TABLE(mdio, ste10Xp_tbl);
+
+MODULE_DESCRIPTION("STMicroelectronics STe10Xp PHY driver");
+MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@st.com>");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/net/phy/vitesse.c b/kernel/drivers/net/phy/vitesse.c
new file mode 100644
index 000000000..76cad712d
--- /dev/null
+++ b/kernel/drivers/net/phy/vitesse.c
@@ -0,0 +1,327 @@
+/*
+ * Driver for Vitesse PHYs
+ *
+ * Author: Kriston Carson
+ *
+ * Copyright (c) 2005, 2009, 2011 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+
+/* Vitesse Extended Page Magic Register(s) */
+#define MII_VSC82X4_EXT_PAGE_16E 0x10
+#define MII_VSC82X4_EXT_PAGE_17E 0x11
+#define MII_VSC82X4_EXT_PAGE_18E 0x12
+
+/* Vitesse Extended Control Register 1 */
+#define MII_VSC8244_EXT_CON1 0x17
+#define MII_VSC8244_EXTCON1_INIT 0x0000
+#define MII_VSC8244_EXTCON1_TX_SKEW_MASK 0x0c00
+#define MII_VSC8244_EXTCON1_RX_SKEW_MASK 0x0300
+#define MII_VSC8244_EXTCON1_TX_SKEW 0x0800
+#define MII_VSC8244_EXTCON1_RX_SKEW 0x0200
+
+/* Vitesse Interrupt Mask Register */
+#define MII_VSC8244_IMASK 0x19
+#define MII_VSC8244_IMASK_IEN 0x8000
+#define MII_VSC8244_IMASK_SPEED 0x4000
+#define MII_VSC8244_IMASK_LINK 0x2000
+#define MII_VSC8244_IMASK_DUPLEX 0x1000
+#define MII_VSC8244_IMASK_MASK 0xf000
+
+#define MII_VSC8221_IMASK_MASK 0xa000
+
+/* Vitesse Interrupt Status Register */
+#define MII_VSC8244_ISTAT 0x1a
+#define MII_VSC8244_ISTAT_STATUS 0x8000
+#define MII_VSC8244_ISTAT_SPEED 0x4000
+#define MII_VSC8244_ISTAT_LINK 0x2000
+#define MII_VSC8244_ISTAT_DUPLEX 0x1000
+
+/* Vitesse Auxiliary Control/Status Register */
+#define MII_VSC8244_AUX_CONSTAT 0x1c
+#define MII_VSC8244_AUXCONSTAT_INIT 0x0000
+#define MII_VSC8244_AUXCONSTAT_DUPLEX 0x0020
+#define MII_VSC8244_AUXCONSTAT_SPEED 0x0018
+#define MII_VSC8244_AUXCONSTAT_GBIT 0x0010
+#define MII_VSC8244_AUXCONSTAT_100 0x0008
+
+#define MII_VSC8221_AUXCONSTAT_INIT 0x0004 /* need to set this bit? */
+#define MII_VSC8221_AUXCONSTAT_RESERVED 0x0004
+
+/* Vitesse Extended Page Access Register */
+#define MII_VSC82X4_EXT_PAGE_ACCESS 0x1f
+
+#define PHY_ID_VSC8234 0x000fc620
+#define PHY_ID_VSC8244 0x000fc6c0
+#define PHY_ID_VSC8514 0x00070670
+#define PHY_ID_VSC8574 0x000704a0
+#define PHY_ID_VSC8662 0x00070660
+#define PHY_ID_VSC8221 0x000fc550
+#define PHY_ID_VSC8211 0x000fc4b0
+
+MODULE_DESCRIPTION("Vitesse PHY driver");
+MODULE_AUTHOR("Kriston Carson");
+MODULE_LICENSE("GPL");
+
+static int vsc824x_add_skew(struct phy_device *phydev)
+{
+ int err;
+ int extcon;
+
+ extcon = phy_read(phydev, MII_VSC8244_EXT_CON1);
+
+ if (extcon < 0)
+ return extcon;
+
+ extcon &= ~(MII_VSC8244_EXTCON1_TX_SKEW_MASK |
+ MII_VSC8244_EXTCON1_RX_SKEW_MASK);
+
+ extcon |= (MII_VSC8244_EXTCON1_TX_SKEW |
+ MII_VSC8244_EXTCON1_RX_SKEW);
+
+ err = phy_write(phydev, MII_VSC8244_EXT_CON1, extcon);
+
+ return err;
+}
+
+static int vsc824x_config_init(struct phy_device *phydev)
+{
+ int err;
+
+ err = phy_write(phydev, MII_VSC8244_AUX_CONSTAT,
+ MII_VSC8244_AUXCONSTAT_INIT);
+ if (err < 0)
+ return err;
+
+ if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
+ err = vsc824x_add_skew(phydev);
+
+ return err;
+}
+
+static int vsc824x_ack_interrupt(struct phy_device *phydev)
+{
+ int err = 0;
+
+ /* Don't bother to ACK the interrupts if interrupts
+ * are disabled. The 824x cannot clear the interrupts
+ * if they are disabled.
+ */
+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+ err = phy_read(phydev, MII_VSC8244_ISTAT);
+
+ return (err < 0) ? err : 0;
+}
+
+static int vsc82xx_config_intr(struct phy_device *phydev)
+{
+ int err;
+
+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+ err = phy_write(phydev, MII_VSC8244_IMASK,
+ (phydev->drv->phy_id == PHY_ID_VSC8234 ||
+ phydev->drv->phy_id == PHY_ID_VSC8244 ||
+ phydev->drv->phy_id == PHY_ID_VSC8514 ||
+ phydev->drv->phy_id == PHY_ID_VSC8574) ?
+ MII_VSC8244_IMASK_MASK :
+ MII_VSC8221_IMASK_MASK);
+ else {
+ /* The Vitesse PHY cannot clear the interrupt
+ * once it has disabled them, so we clear them first
+ */
+ err = phy_read(phydev, MII_VSC8244_ISTAT);
+
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, MII_VSC8244_IMASK, 0);
+ }
+
+ return err;
+}
+
+static int vsc8221_config_init(struct phy_device *phydev)
+{
+ int err;
+
+ err = phy_write(phydev, MII_VSC8244_AUX_CONSTAT,
+ MII_VSC8221_AUXCONSTAT_INIT);
+ return err;
+
+ /* Perhaps we should set EXT_CON1 based on the interface?
+ * Options are 802.3Z SerDes or SGMII
+ */
+}
+
+/* vsc82x4_config_autocross_enable - Enable auto MDI/MDI-X for forced links
+ * @phydev: target phy_device struct
+ *
+ * Enable auto MDI/MDI-X when in 10/100 forced link speeds by writing
+ * special values in the VSC8234/VSC8244 extended reserved registers
+ */
+static int vsc82x4_config_autocross_enable(struct phy_device *phydev)
+{
+ int ret;
+
+ if (phydev->autoneg == AUTONEG_ENABLE || phydev->speed > SPEED_100)
+ return 0;
+
+ /* map extended registers set 0x10 - 0x1e */
+ ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_ACCESS, 0x52b5);
+ if (ret >= 0)
+ ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_18E, 0x0012);
+ if (ret >= 0)
+ ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_17E, 0x2803);
+ if (ret >= 0)
+ ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_16E, 0x87fa);
+ /* map standard registers set 0x10 - 0x1e */
+ if (ret >= 0)
+ ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_ACCESS, 0x0000);
+ else
+ phy_write(phydev, MII_VSC82X4_EXT_PAGE_ACCESS, 0x0000);
+
+ return ret;
+}
+
+/* vsc82x4_config_aneg - restart auto-negotiation or write BMCR
+ * @phydev: target phy_device struct
+ *
+ * Description: If auto-negotiation is enabled, we configure the
+ * advertising, and then restart auto-negotiation. If it is not
+ * enabled, then we write the BMCR and also start the auto
+ * MDI/MDI-X feature
+ */
+static int vsc82x4_config_aneg(struct phy_device *phydev)
+{
+ int ret;
+
+ /* Enable auto MDI/MDI-X when in 10/100 forced link speeds by
+ * writing special values in the VSC8234 extended reserved registers
+ */
+ if (phydev->autoneg != AUTONEG_ENABLE && phydev->speed <= SPEED_100) {
+ ret = genphy_setup_forced(phydev);
+
+ if (ret < 0) /* error */
+ return ret;
+
+ return vsc82x4_config_autocross_enable(phydev);
+ }
+
+ return genphy_config_aneg(phydev);
+}
+
+/* Vitesse 82xx */
+static struct phy_driver vsc82xx_driver[] = {
+{
+ .phy_id = PHY_ID_VSC8234,
+ .name = "Vitesse VSC8234",
+ .phy_id_mask = 0x000ffff0,
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = &vsc824x_config_init,
+ .config_aneg = &vsc82x4_config_aneg,
+ .read_status = &genphy_read_status,
+ .ack_interrupt = &vsc824x_ack_interrupt,
+ .config_intr = &vsc82xx_config_intr,
+ .driver = { .owner = THIS_MODULE,},
+}, {
+ .phy_id = PHY_ID_VSC8244,
+ .name = "Vitesse VSC8244",
+ .phy_id_mask = 0x000fffc0,
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = &vsc824x_config_init,
+ .config_aneg = &vsc82x4_config_aneg,
+ .read_status = &genphy_read_status,
+ .ack_interrupt = &vsc824x_ack_interrupt,
+ .config_intr = &vsc82xx_config_intr,
+ .driver = { .owner = THIS_MODULE,},
+}, {
+ .phy_id = PHY_ID_VSC8514,
+ .name = "Vitesse VSC8514",
+ .phy_id_mask = 0x000ffff0,
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = &vsc824x_config_init,
+ .config_aneg = &vsc82x4_config_aneg,
+ .read_status = &genphy_read_status,
+ .ack_interrupt = &vsc824x_ack_interrupt,
+ .config_intr = &vsc82xx_config_intr,
+ .driver = { .owner = THIS_MODULE,},
+}, {
+ .phy_id = PHY_ID_VSC8574,
+ .name = "Vitesse VSC8574",
+ .phy_id_mask = 0x000ffff0,
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = &vsc824x_config_init,
+ .config_aneg = &vsc82x4_config_aneg,
+ .read_status = &genphy_read_status,
+ .ack_interrupt = &vsc824x_ack_interrupt,
+ .config_intr = &vsc82xx_config_intr,
+ .driver = { .owner = THIS_MODULE,},
+}, {
+ .phy_id = PHY_ID_VSC8662,
+ .name = "Vitesse VSC8662",
+ .phy_id_mask = 0x000ffff0,
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = &vsc824x_config_init,
+ .config_aneg = &vsc82x4_config_aneg,
+ .read_status = &genphy_read_status,
+ .ack_interrupt = &vsc824x_ack_interrupt,
+ .config_intr = &vsc82xx_config_intr,
+ .driver = { .owner = THIS_MODULE,},
+}, {
+ /* Vitesse 8221 */
+ .phy_id = PHY_ID_VSC8221,
+ .phy_id_mask = 0x000ffff0,
+ .name = "Vitesse VSC8221",
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = &vsc8221_config_init,
+ .config_aneg = &genphy_config_aneg,
+ .read_status = &genphy_read_status,
+ .ack_interrupt = &vsc824x_ack_interrupt,
+ .config_intr = &vsc82xx_config_intr,
+ .driver = { .owner = THIS_MODULE,},
+}, {
+ /* Vitesse 8211 */
+ .phy_id = PHY_ID_VSC8211,
+ .phy_id_mask = 0x000ffff0,
+ .name = "Vitesse VSC8211",
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = &vsc8221_config_init,
+ .config_aneg = &genphy_config_aneg,
+ .read_status = &genphy_read_status,
+ .ack_interrupt = &vsc824x_ack_interrupt,
+ .config_intr = &vsc82xx_config_intr,
+ .driver = { .owner = THIS_MODULE,},
+} };
+
+module_phy_driver(vsc82xx_driver);
+
+static struct mdio_device_id __maybe_unused vitesse_tbl[] = {
+ { PHY_ID_VSC8234, 0x000ffff0 },
+ { PHY_ID_VSC8244, 0x000fffc0 },
+ { PHY_ID_VSC8514, 0x000ffff0 },
+ { PHY_ID_VSC8574, 0x000ffff0 },
+ { PHY_ID_VSC8662, 0x000ffff0 },
+ { PHY_ID_VSC8221, 0x000ffff0 },
+ { PHY_ID_VSC8211, 0x000ffff0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(mdio, vitesse_tbl);