Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

1 files changed, 108 insertions, 0 deletions

diff --git a/kernel/drivers/net/phy/et1011c.c b/kernel/drivers/net/phy/et1011c.c
new file mode 100644
index 000000000..a90774381
--- /dev/null
+++ b/kernel/drivers/net/phy/et1011c.c
@@ -0,0 +1,108 @@
+/*
+ * drivers/net/phy/et1011c.c
+ *
+ * Driver for LSI ET1011C PHYs
+ *
+ * Author: Chaithrika U S
+ *
+ * Copyright (c) 2008 Texas Instruments
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/unistd.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <asm/irq.h>
+
+#define ET1011C_STATUS_REG	(0x1A)
+#define ET1011C_CONFIG_REG	(0x16)
+#define ET1011C_SPEED_MASK		(0x0300)
+#define ET1011C_GIGABIT_SPEED		(0x0200)
+#define ET1011C_TX_FIFO_MASK		(0x3000)
+#define ET1011C_TX_FIFO_DEPTH_8		(0x0000)
+#define ET1011C_TX_FIFO_DEPTH_16	(0x1000)
+#define ET1011C_INTERFACE_MASK		(0x0007)
+#define ET1011C_GMII_INTERFACE		(0x0002)
+#define ET1011C_SYS_CLK_EN		(0x01 << 4)
+
+
+MODULE_DESCRIPTION("LSI ET1011C PHY driver");
+MODULE_AUTHOR("Chaithrika U S");
+MODULE_LICENSE("GPL");
+
+static int et1011c_config_aneg(struct phy_device *phydev)
+{
+	int ctl = 0;
+	ctl = phy_read(phydev, MII_BMCR);
+	if (ctl < 0)
+		return ctl;
+	ctl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_SPEED1000 |
+		 BMCR_ANENABLE);
+	/* First clear the PHY */
+	phy_write(phydev, MII_BMCR, ctl | BMCR_RESET);
+
+	return genphy_config_aneg(phydev);
+}
+
+static int et1011c_read_status(struct phy_device *phydev)
+{
+	int ret;
+	u32 val;
+	static int speed;
+	ret = genphy_read_status(phydev);
+
+	if (speed != phydev->speed) {
+		speed = phydev->speed;
+		val = phy_read(phydev, ET1011C_STATUS_REG);
+		if ((val & ET1011C_SPEED_MASK) ==
+					ET1011C_GIGABIT_SPEED) {
+			val = phy_read(phydev, ET1011C_CONFIG_REG);
+			val &= ~ET1011C_TX_FIFO_MASK;
+			phy_write(phydev, ET1011C_CONFIG_REG, val\
+					| ET1011C_GMII_INTERFACE\
+					| ET1011C_SYS_CLK_EN\
+					| ET1011C_TX_FIFO_DEPTH_16);
+
+		}
+	}
+	return ret;
+}
+
+static struct phy_driver et1011c_driver[] = { {
+	.phy_id		= 0x0282f014,
+	.name		= "ET1011C",
+	.phy_id_mask	= 0xfffffff0,
+	.features	= (PHY_BASIC_FEATURES | SUPPORTED_1000baseT_Full),
+	.flags		= PHY_POLL,
+	.config_aneg	= et1011c_config_aneg,
+	.read_status	= et1011c_read_status,
+	.driver 	= { .owner = THIS_MODULE,},
+} };
+
+module_phy_driver(et1011c_driver);
+
+static struct mdio_device_id __maybe_unused et1011c_tbl[] = {
+	{ 0x0282f014, 0xfffffff0 },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(mdio, et1011c_tbl);