Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

1 files changed, 1150 insertions, 0 deletions

diff --git a/kernel/drivers/net/irda/sa1100_ir.c b/kernel/drivers/net/irda/sa1100_ir.c
new file mode 100644
index 000000000..b6e44ff4e
--- /dev/null
+++ b/kernel/drivers/net/irda/sa1100_ir.c
@@ -0,0 +1,1150 @@
+/*
+ *  linux/drivers/net/irda/sa1100_ir.c
+ *
+ *  Copyright (C) 2000-2001 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Infra-red driver for the StrongARM SA1100 embedded microprocessor
+ *
+ *  Note that we don't have to worry about the SA1111's DMA bugs in here,
+ *  so we use the straight forward dma_map_* functions with a null pointer.
+ *
+ *  This driver takes one kernel command line parameter, sa1100ir=, with
+ *  the following options:
+ *	max_rate:baudrate	- set the maximum baud rate
+ *	power_level:level	- set the transmitter power level
+ *	tx_lpm:0|1		- set transmit low power mode
+ */
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/netdevice.h>
+#include <linux/slab.h>
+#include <linux/rtnetlink.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/sa11x0-dma.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/wrapper.h>
+#include <net/irda/irda_device.h>
+
+#include <mach/hardware.h>
+#include <linux/platform_data/irda-sa11x0.h>
+
+static int power_level = 3;
+static int tx_lpm;
+static int max_rate = 4000000;
+
+struct sa1100_buf {
+	struct device		*dev;
+	struct sk_buff		*skb;
+	struct scatterlist	sg;
+	struct dma_chan		*chan;
+	dma_cookie_t		cookie;
+};
+
+struct sa1100_irda {
+	unsigned char		utcr4;
+	unsigned char		power;
+	unsigned char		open;
+
+	int			speed;
+	int			newspeed;
+
+	struct sa1100_buf	dma_rx;
+	struct sa1100_buf	dma_tx;
+
+	struct device		*dev;
+	struct irda_platform_data *pdata;
+	struct irlap_cb		*irlap;
+	struct qos_info		qos;
+
+	iobuff_t		tx_buff;
+	iobuff_t		rx_buff;
+
+	int (*tx_start)(struct sk_buff *, struct net_device *, struct sa1100_irda *);
+	irqreturn_t (*irq)(struct net_device *, struct sa1100_irda *);
+};
+
+static int sa1100_irda_set_speed(struct sa1100_irda *, int);
+
+#define IS_FIR(si)		((si)->speed >= 4000000)
+
+#define HPSIR_MAX_RXLEN		2047
+
+static struct dma_slave_config sa1100_irda_sir_tx = {
+	.direction	= DMA_TO_DEVICE,
+	.dst_addr	= __PREG(Ser2UTDR),
+	.dst_addr_width	= DMA_SLAVE_BUSWIDTH_1_BYTE,
+	.dst_maxburst	= 4,
+};
+
+static struct dma_slave_config sa1100_irda_fir_rx = {
+	.direction	= DMA_FROM_DEVICE,
+	.src_addr	= __PREG(Ser2HSDR),
+	.src_addr_width	= DMA_SLAVE_BUSWIDTH_1_BYTE,
+	.src_maxburst	= 8,
+};
+
+static struct dma_slave_config sa1100_irda_fir_tx = {
+	.direction	= DMA_TO_DEVICE,
+	.dst_addr	= __PREG(Ser2HSDR),
+	.dst_addr_width	= DMA_SLAVE_BUSWIDTH_1_BYTE,
+	.dst_maxburst	= 8,
+};
+
+static unsigned sa1100_irda_dma_xferred(struct sa1100_buf *buf)
+{
+	struct dma_chan *chan = buf->chan;
+	struct dma_tx_state state;
+	enum dma_status status;
+
+	status = chan->device->device_tx_status(chan, buf->cookie, &state);
+	if (status != DMA_PAUSED)
+		return 0;
+
+	return sg_dma_len(&buf->sg) - state.residue;
+}
+
+static int sa1100_irda_dma_request(struct device *dev, struct sa1100_buf *buf,
+	const char *name, struct dma_slave_config *cfg)
+{
+	dma_cap_mask_t m;
+	int ret;
+
+	dma_cap_zero(m);
+	dma_cap_set(DMA_SLAVE, m);
+
+	buf->chan = dma_request_channel(m, sa11x0_dma_filter_fn, (void *)name);
+	if (!buf->chan) {
+		dev_err(dev, "unable to request DMA channel for %s\n",
+			name);
+		return -ENOENT;
+	}
+
+	ret = dmaengine_slave_config(buf->chan, cfg);
+	if (ret)
+		dev_warn(dev, "DMA slave_config for %s returned %d\n",
+			name, ret);
+
+	buf->dev = buf->chan->device->dev;
+
+	return 0;
+}
+
+static void sa1100_irda_dma_start(struct sa1100_buf *buf,
+	enum dma_transfer_direction dir, dma_async_tx_callback cb, void *cb_p)
+{
+	struct dma_async_tx_descriptor *desc;
+	struct dma_chan *chan = buf->chan;
+
+	desc = dmaengine_prep_slave_sg(chan, &buf->sg, 1, dir,
+			DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+	if (desc) {
+		desc->callback = cb;
+		desc->callback_param = cb_p;
+		buf->cookie = dmaengine_submit(desc);
+		dma_async_issue_pending(chan);
+	}
+}
+
+/*
+ * Allocate and map the receive buffer, unless it is already allocated.
+ */
+static int sa1100_irda_rx_alloc(struct sa1100_irda *si)
+{
+	if (si->dma_rx.skb)
+		return 0;
+
+	si->dma_rx.skb = alloc_skb(HPSIR_MAX_RXLEN + 1, GFP_ATOMIC);
+	if (!si->dma_rx.skb) {
+		printk(KERN_ERR "sa1100_ir: out of memory for RX SKB\n");
+		return -ENOMEM;
+	}
+
+	/*
+	 * Align any IP headers that may be contained
+	 * within the frame.
+	 */
+	skb_reserve(si->dma_rx.skb, 1);
+
+	sg_set_buf(&si->dma_rx.sg, si->dma_rx.skb->data, HPSIR_MAX_RXLEN);
+	if (dma_map_sg(si->dma_rx.dev, &si->dma_rx.sg, 1, DMA_FROM_DEVICE) == 0) {
+		dev_kfree_skb_any(si->dma_rx.skb);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+/*
+ * We want to get here as soon as possible, and get the receiver setup.
+ * We use the existing buffer.
+ */
+static void sa1100_irda_rx_dma_start(struct sa1100_irda *si)
+{
+	if (!si->dma_rx.skb) {
+		printk(KERN_ERR "sa1100_ir: rx buffer went missing\n");
+		return;
+	}
+
+	/*
+	 * First empty receive FIFO
+	 */
+	Ser2HSCR0 = HSCR0_HSSP;
+
+	/*
+	 * Enable the DMA, receiver and receive interrupt.
+	 */
+	dmaengine_terminate_all(si->dma_rx.chan);
+	sa1100_irda_dma_start(&si->dma_rx, DMA_DEV_TO_MEM, NULL, NULL);
+
+	Ser2HSCR0 = HSCR0_HSSP | HSCR0_RXE;
+}
+
+static void sa1100_irda_check_speed(struct sa1100_irda *si)
+{
+	if (si->newspeed) {
+		sa1100_irda_set_speed(si, si->newspeed);
+		si->newspeed = 0;
+	}
+}
+
+/*
+ * HP-SIR format support.
+ */
+static void sa1100_irda_sirtxdma_irq(void *id)
+{
+	struct net_device *dev = id;
+	struct sa1100_irda *si = netdev_priv(dev);
+
+	dma_unmap_sg(si->dma_tx.dev, &si->dma_tx.sg, 1, DMA_TO_DEVICE);
+	dev_kfree_skb(si->dma_tx.skb);
+	si->dma_tx.skb = NULL;
+
+	dev->stats.tx_packets++;
+	dev->stats.tx_bytes += sg_dma_len(&si->dma_tx.sg);
+
+	/* We need to ensure that the transmitter has finished. */
+	do
+		rmb();
+	while (Ser2UTSR1 & UTSR1_TBY);
+
+	/*
+	 * Ok, we've finished transmitting.  Now enable the receiver.
+	 * Sometimes we get a receive IRQ immediately after a transmit...
+	 */
+	Ser2UTSR0 = UTSR0_REB | UTSR0_RBB | UTSR0_RID;
+	Ser2UTCR3 = UTCR3_RIE | UTCR3_RXE | UTCR3_TXE;
+
+	sa1100_irda_check_speed(si);
+
+	/* I'm hungry! */
+	netif_wake_queue(dev);
+}
+
+static int sa1100_irda_sir_tx_start(struct sk_buff *skb, struct net_device *dev,
+	struct sa1100_irda *si)
+{
+	si->tx_buff.data = si->tx_buff.head;
+	si->tx_buff.len  = async_wrap_skb(skb, si->tx_buff.data,
+					  si->tx_buff.truesize);
+
+	si->dma_tx.skb = skb;
+	sg_set_buf(&si->dma_tx.sg, si->tx_buff.data, si->tx_buff.len);
+	if (dma_map_sg(si->dma_tx.dev, &si->dma_tx.sg, 1, DMA_TO_DEVICE) == 0) {
+		si->dma_tx.skb = NULL;
+		netif_wake_queue(dev);
+		dev->stats.tx_dropped++;
+		return NETDEV_TX_OK;
+	}
+
+	sa1100_irda_dma_start(&si->dma_tx, DMA_MEM_TO_DEV, sa1100_irda_sirtxdma_irq, dev);
+
+	/*
+	 * The mean turn-around time is enforced by XBOF padding,
+	 * so we don't have to do anything special here.
+	 */
+	Ser2UTCR3 = UTCR3_TXE;
+
+	return NETDEV_TX_OK;
+}
+
+static irqreturn_t sa1100_irda_sir_irq(struct net_device *dev, struct sa1100_irda *si)
+{
+	int status;
+
+	status = Ser2UTSR0;
+
+	/*
+	 * Deal with any receive errors first.  The bytes in error may be
+	 * the only bytes in the receive FIFO, so we do this first.
+	 */
+	while (status & UTSR0_EIF) {
+		int stat, data;
+
+		stat = Ser2UTSR1;
+		data = Ser2UTDR;
+
+		if (stat & (UTSR1_FRE | UTSR1_ROR)) {
+			dev->stats.rx_errors++;
+			if (stat & UTSR1_FRE)
+				dev->stats.rx_frame_errors++;
+			if (stat & UTSR1_ROR)
+				dev->stats.rx_fifo_errors++;
+		} else
+			async_unwrap_char(dev, &dev->stats, &si->rx_buff, data);
+
+		status = Ser2UTSR0;
+	}
+
+	/*
+	 * We must clear certain bits.
+	 */
+	Ser2UTSR0 = status & (UTSR0_RID | UTSR0_RBB | UTSR0_REB);
+
+	if (status & UTSR0_RFS) {
+		/*
+		 * There are at least 4 bytes in the FIFO.  Read 3 bytes
+		 * and leave the rest to the block below.
+		 */
+		async_unwrap_char(dev, &dev->stats, &si->rx_buff, Ser2UTDR);
+		async_unwrap_char(dev, &dev->stats, &si->rx_buff, Ser2UTDR);
+		async_unwrap_char(dev, &dev->stats, &si->rx_buff, Ser2UTDR);
+	}
+
+	if (status & (UTSR0_RFS | UTSR0_RID)) {
+		/*
+		 * Fifo contains more than 1 character.
+		 */
+		do {
+			async_unwrap_char(dev, &dev->stats, &si->rx_buff,
+					  Ser2UTDR);
+		} while (Ser2UTSR1 & UTSR1_RNE);
+
+	}
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * FIR format support.
+ */
+static void sa1100_irda_firtxdma_irq(void *id)
+{
+	struct net_device *dev = id;
+	struct sa1100_irda *si = netdev_priv(dev);
+	struct sk_buff *skb;
+
+	/*
+	 * Wait for the transmission to complete.  Unfortunately,
+	 * the hardware doesn't give us an interrupt to indicate
+	 * "end of frame".
+	 */
+	do
+		rmb();
+	while (!(Ser2HSSR0 & HSSR0_TUR) || Ser2HSSR1 & HSSR1_TBY);
+
+	/*
+	 * Clear the transmit underrun bit.
+	 */
+	Ser2HSSR0 = HSSR0_TUR;
+
+	/*
+	 * Do we need to change speed?  Note that we're lazy
+	 * here - we don't free the old dma_rx.skb.  We don't need
+	 * to allocate a buffer either.
+	 */
+	sa1100_irda_check_speed(si);
+
+	/*
+	 * Start reception.  This disables the transmitter for
+	 * us.  This will be using the existing RX buffer.
+	 */
+	sa1100_irda_rx_dma_start(si);
+
+	/* Account and free the packet. */
+	skb = si->dma_tx.skb;
+	if (skb) {
+		dma_unmap_sg(si->dma_tx.dev, &si->dma_tx.sg, 1,
+			     DMA_TO_DEVICE);
+		dev->stats.tx_packets ++;
+		dev->stats.tx_bytes += skb->len;
+		dev_kfree_skb_irq(skb);
+		si->dma_tx.skb = NULL;
+	}
+
+	/*
+	 * Make sure that the TX queue is available for sending
+	 * (for retries).  TX has priority over RX at all times.
+	 */
+	netif_wake_queue(dev);
+}
+
+static int sa1100_irda_fir_tx_start(struct sk_buff *skb, struct net_device *dev,
+	struct sa1100_irda *si)
+{
+	int mtt = irda_get_mtt(skb);
+
+	si->dma_tx.skb = skb;
+	sg_set_buf(&si->dma_tx.sg, skb->data, skb->len);
+	if (dma_map_sg(si->dma_tx.dev, &si->dma_tx.sg, 1, DMA_TO_DEVICE) == 0) {
+		si->dma_tx.skb = NULL;
+		netif_wake_queue(dev);
+		dev->stats.tx_dropped++;
+		dev_kfree_skb(skb);
+		return NETDEV_TX_OK;
+	}
+
+	sa1100_irda_dma_start(&si->dma_tx, DMA_MEM_TO_DEV, sa1100_irda_firtxdma_irq, dev);
+
+	/*
+	 * If we have a mean turn-around time, impose the specified
+	 * specified delay.  We could shorten this by timing from
+	 * the point we received the packet.
+	 */
+	if (mtt)
+		udelay(mtt);
+
+	Ser2HSCR0 = HSCR0_HSSP | HSCR0_TXE;
+
+	return NETDEV_TX_OK;
+}
+
+static void sa1100_irda_fir_error(struct sa1100_irda *si, struct net_device *dev)
+{
+	struct sk_buff *skb = si->dma_rx.skb;
+	unsigned int len, stat, data;
+
+	if (!skb) {
+		printk(KERN_ERR "sa1100_ir: SKB is NULL!\n");
+		return;
+	}
+
+	/*
+	 * Get the current data position.
+	 */
+	len = sa1100_irda_dma_xferred(&si->dma_rx);
+	if (len > HPSIR_MAX_RXLEN)
+		len = HPSIR_MAX_RXLEN;
+	dma_unmap_sg(si->dma_rx.dev, &si->dma_rx.sg, 1, DMA_FROM_DEVICE);
+
+	do {
+		/*
+		 * Read Status, and then Data.
+		 */
+		stat = Ser2HSSR1;
+		rmb();
+		data = Ser2HSDR;
+
+		if (stat & (HSSR1_CRE | HSSR1_ROR)) {
+			dev->stats.rx_errors++;
+			if (stat & HSSR1_CRE)
+				dev->stats.rx_crc_errors++;
+			if (stat & HSSR1_ROR)
+				dev->stats.rx_frame_errors++;
+		} else
+			skb->data[len++] = data;
+
+		/*
+		 * If we hit the end of frame, there's
+		 * no point in continuing.
+		 */
+		if (stat & HSSR1_EOF)
+			break;
+	} while (Ser2HSSR0 & HSSR0_EIF);
+
+	if (stat & HSSR1_EOF) {
+		si->dma_rx.skb = NULL;
+
+		skb_put(skb, len);
+		skb->dev = dev;
+		skb_reset_mac_header(skb);
+		skb->protocol = htons(ETH_P_IRDA);
+		dev->stats.rx_packets++;
+		dev->stats.rx_bytes += len;
+
+		/*
+		 * Before we pass the buffer up, allocate a new one.
+		 */
+		sa1100_irda_rx_alloc(si);
+
+		netif_rx(skb);
+	} else {
+		/*
+		 * Remap the buffer - it was previously mapped, and we
+		 * hope that this succeeds.
+		 */
+		dma_map_sg(si->dma_rx.dev, &si->dma_rx.sg, 1, DMA_FROM_DEVICE);
+	}
+}
+
+/*
+ * We only have to handle RX events here; transmit events go via the TX
+ * DMA handler. We disable RX, process, and the restart RX.
+ */
+static irqreturn_t sa1100_irda_fir_irq(struct net_device *dev, struct sa1100_irda *si)
+{
+	/*
+	 * Stop RX DMA
+	 */
+	dmaengine_pause(si->dma_rx.chan);
+
+	/*
+	 * Framing error - we throw away the packet completely.
+	 * Clearing RXE flushes the error conditions and data
+	 * from the fifo.
+	 */
+	if (Ser2HSSR0 & (HSSR0_FRE | HSSR0_RAB)) {
+		dev->stats.rx_errors++;
+
+		if (Ser2HSSR0 & HSSR0_FRE)
+			dev->stats.rx_frame_errors++;
+
+		/*
+		 * Clear out the DMA...
+		 */
+		Ser2HSCR0 = HSCR0_HSSP;
+
+		/*
+		 * Clear selected status bits now, so we
+		 * don't miss them next time around.
+		 */
+		Ser2HSSR0 = HSSR0_FRE | HSSR0_RAB;
+	}
+
+	/*
+	 * Deal with any receive errors.  The any of the lowest
+	 * 8 bytes in the FIFO may contain an error.  We must read
+	 * them one by one.  The "error" could even be the end of
+	 * packet!
+	 */
+	if (Ser2HSSR0 & HSSR0_EIF)
+		sa1100_irda_fir_error(si, dev);
+
+	/*
+	 * No matter what happens, we must restart reception.
+	 */
+	sa1100_irda_rx_dma_start(si);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * Set the IrDA communications speed.
+ */
+static int sa1100_irda_set_speed(struct sa1100_irda *si, int speed)
+{
+	unsigned long flags;
+	int brd, ret = -EINVAL;
+
+	switch (speed) {
+	case 9600:	case 19200:	case 38400:
+	case 57600:	case 115200:
+		brd = 3686400 / (16 * speed) - 1;
+
+		/* Stop the receive DMA, and configure transmit. */
+		if (IS_FIR(si)) {
+			dmaengine_terminate_all(si->dma_rx.chan);
+			dmaengine_slave_config(si->dma_tx.chan,
+						&sa1100_irda_sir_tx);
+		}
+
+		local_irq_save(flags);
+
+		Ser2UTCR3 = 0;
+		Ser2HSCR0 = HSCR0_UART;
+
+		Ser2UTCR1 = brd >> 8;
+		Ser2UTCR2 = brd;
+
+		/*
+		 * Clear status register
+		 */
+		Ser2UTSR0 = UTSR0_REB | UTSR0_RBB | UTSR0_RID;
+		Ser2UTCR3 = UTCR3_RIE | UTCR3_RXE | UTCR3_TXE;
+
+		if (si->pdata->set_speed)
+			si->pdata->set_speed(si->dev, speed);
+
+		si->speed = speed;
+		si->tx_start = sa1100_irda_sir_tx_start;
+		si->irq = sa1100_irda_sir_irq;
+
+		local_irq_restore(flags);
+		ret = 0;
+		break;
+
+	case 4000000:
+		if (!IS_FIR(si))
+			dmaengine_slave_config(si->dma_tx.chan,
+						&sa1100_irda_fir_tx);
+
+		local_irq_save(flags);
+
+		Ser2HSSR0 = 0xff;
+		Ser2HSCR0 = HSCR0_HSSP;
+		Ser2UTCR3 = 0;
+
+		si->speed = speed;
+		si->tx_start = sa1100_irda_fir_tx_start;
+		si->irq = sa1100_irda_fir_irq;
+
+		if (si->pdata->set_speed)
+			si->pdata->set_speed(si->dev, speed);
+
+		sa1100_irda_rx_alloc(si);
+		sa1100_irda_rx_dma_start(si);
+
+		local_irq_restore(flags);
+
+		break;
+
+	default:
+		break;
+	}
+
+	return ret;
+}
+
+/*
+ * Control the power state of the IrDA transmitter.
+ * State:
+ *  0 - off
+ *  1 - short range, lowest power
+ *  2 - medium range, medium power
+ *  3 - maximum range, high power
+ *
+ * Currently, only assabet is known to support this.
+ */
+static int
+__sa1100_irda_set_power(struct sa1100_irda *si, unsigned int state)
+{
+	int ret = 0;
+	if (si->pdata->set_power)
+		ret = si->pdata->set_power(si->dev, state);
+	return ret;
+}
+
+static inline int
+sa1100_set_power(struct sa1100_irda *si, unsigned int state)
+{
+	int ret;
+
+	ret = __sa1100_irda_set_power(si, state);
+	if (ret == 0)
+		si->power = state;
+
+	return ret;
+}
+
+static irqreturn_t sa1100_irda_irq(int irq, void *dev_id)
+{
+	struct net_device *dev = dev_id;
+	struct sa1100_irda *si = netdev_priv(dev);
+
+	return si->irq(dev, si);
+}
+
+static int sa1100_irda_hard_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	struct sa1100_irda *si = netdev_priv(dev);
+	int speed = irda_get_next_speed(skb);
+
+	/*
+	 * Does this packet contain a request to change the interface
+	 * speed?  If so, remember it until we complete the transmission
+	 * of this frame.
+	 */
+	if (speed != si->speed && speed != -1)
+		si->newspeed = speed;
+
+	/* If this is an empty frame, we can bypass a lot. */
+	if (skb->len == 0) {
+		sa1100_irda_check_speed(si);
+		dev_kfree_skb(skb);
+		return NETDEV_TX_OK;
+	}
+
+	netif_stop_queue(dev);
+
+	/* We must not already have a skb to transmit... */
+	BUG_ON(si->dma_tx.skb);
+
+	return si->tx_start(skb, dev, si);
+}
+
+static int
+sa1100_irda_ioctl(struct net_device *dev, struct ifreq *ifreq, int cmd)
+{
+	struct if_irda_req *rq = (struct if_irda_req *)ifreq;
+	struct sa1100_irda *si = netdev_priv(dev);
+	int ret = -EOPNOTSUPP;
+
+	switch (cmd) {
+	case SIOCSBANDWIDTH:
+		if (capable(CAP_NET_ADMIN)) {
+			/*
+			 * We are unable to set the speed if the
+			 * device is not running.
+			 */
+			if (si->open) {
+				ret = sa1100_irda_set_speed(si,
+						rq->ifr_baudrate);
+			} else {
+				printk("sa1100_irda_ioctl: SIOCSBANDWIDTH: !netif_running\n");
+				ret = 0;
+			}
+		}
+		break;
+
+	case SIOCSMEDIABUSY:
+		ret = -EPERM;
+		if (capable(CAP_NET_ADMIN)) {
+			irda_device_set_media_busy(dev, TRUE);
+			ret = 0;
+		}
+		break;
+
+	case SIOCGRECEIVING:
+		rq->ifr_receiving = IS_FIR(si) ? 0
+					: si->rx_buff.state != OUTSIDE_FRAME;
+		break;
+
+	default:
+		break;
+	}
+		
+	return ret;
+}
+
+static int sa1100_irda_startup(struct sa1100_irda *si)
+{
+	int ret;
+
+	/*
+	 * Ensure that the ports for this device are setup correctly.
+	 */
+	if (si->pdata->startup)	{
+		ret = si->pdata->startup(si->dev);
+		if (ret)
+			return ret;
+	}
+
+	/*
+	 * Configure PPC for IRDA - we want to drive TXD2 low.
+	 * We also want to drive this pin low during sleep.
+	 */
+	PPSR &= ~PPC_TXD2;
+	PSDR &= ~PPC_TXD2;
+	PPDR |= PPC_TXD2;
+
+	/*
+	 * Enable HP-SIR modulation, and ensure that the port is disabled.
+	 */
+	Ser2UTCR3 = 0;
+	Ser2HSCR0 = HSCR0_UART;
+	Ser2UTCR4 = si->utcr4;
+	Ser2UTCR0 = UTCR0_8BitData;
+	Ser2HSCR2 = HSCR2_TrDataH | HSCR2_RcDataL;
+
+	/*
+	 * Clear status register
+	 */
+	Ser2UTSR0 = UTSR0_REB | UTSR0_RBB | UTSR0_RID;
+
+	ret = sa1100_irda_set_speed(si, si->speed = 9600);
+	if (ret) {
+		Ser2UTCR3 = 0;
+		Ser2HSCR0 = 0;
+
+		if (si->pdata->shutdown)
+			si->pdata->shutdown(si->dev);
+	}
+
+	return ret;
+}
+
+static void sa1100_irda_shutdown(struct sa1100_irda *si)
+{
+	/*
+	 * Stop all DMA activity.
+	 */
+	dmaengine_terminate_all(si->dma_rx.chan);
+	dmaengine_terminate_all(si->dma_tx.chan);
+
+	/* Disable the port. */
+	Ser2UTCR3 = 0;
+	Ser2HSCR0 = 0;
+
+	if (si->pdata->shutdown)
+		si->pdata->shutdown(si->dev);
+}
+
+static int sa1100_irda_start(struct net_device *dev)
+{
+	struct sa1100_irda *si = netdev_priv(dev);
+	int err;
+
+	si->speed = 9600;
+
+	err = sa1100_irda_dma_request(si->dev, &si->dma_rx, "Ser2ICPRc",
+				&sa1100_irda_fir_rx);
+	if (err)
+		goto err_rx_dma;
+
+	err = sa1100_irda_dma_request(si->dev, &si->dma_tx, "Ser2ICPTr",
+				&sa1100_irda_sir_tx);
+	if (err)
+		goto err_tx_dma;
+
+	/*
+	 * Setup the serial port for the specified speed.
+	 */
+	err = sa1100_irda_startup(si);
+	if (err)
+		goto err_startup;
+
+	/*
+	 * Open a new IrLAP layer instance.
+	 */
+	si->irlap = irlap_open(dev, &si->qos, "sa1100");
+	err = -ENOMEM;
+	if (!si->irlap)
+		goto err_irlap;
+
+	err = request_irq(dev->irq, sa1100_irda_irq, 0, dev->name, dev);
+	if (err)
+		goto err_irq;
+
+	/*
+	 * Now enable the interrupt and start the queue
+	 */
+	si->open = 1;
+	sa1100_set_power(si, power_level); /* low power mode */
+
+	netif_start_queue(dev);
+	return 0;
+
+err_irq:
+	irlap_close(si->irlap);
+err_irlap:
+	si->open = 0;
+	sa1100_irda_shutdown(si);
+err_startup:
+	dma_release_channel(si->dma_tx.chan);
+err_tx_dma:
+	dma_release_channel(si->dma_rx.chan);
+err_rx_dma:
+	return err;
+}
+
+static int sa1100_irda_stop(struct net_device *dev)
+{
+	struct sa1100_irda *si = netdev_priv(dev);
+	struct sk_buff *skb;
+
+	netif_stop_queue(dev);
+
+	si->open = 0;
+	sa1100_irda_shutdown(si);
+
+	/*
+	 * If we have been doing any DMA activity, make sure we
+	 * tidy that up cleanly.
+	 */
+	skb = si->dma_rx.skb;
+	if (skb) {
+		dma_unmap_sg(si->dma_rx.dev, &si->dma_rx.sg, 1,
+			     DMA_FROM_DEVICE);
+		dev_kfree_skb(skb);
+		si->dma_rx.skb = NULL;
+	}
+
+	skb = si->dma_tx.skb;
+	if (skb) {
+		dma_unmap_sg(si->dma_tx.dev, &si->dma_tx.sg, 1,
+			     DMA_TO_DEVICE);
+		dev_kfree_skb(skb);
+		si->dma_tx.skb = NULL;
+	}
+
+	/* Stop IrLAP */
+	if (si->irlap) {
+		irlap_close(si->irlap);
+		si->irlap = NULL;
+	}
+
+	/*
+	 * Free resources
+	 */
+	dma_release_channel(si->dma_tx.chan);
+	dma_release_channel(si->dma_rx.chan);
+	free_irq(dev->irq, dev);
+
+	sa1100_set_power(si, 0);
+
+	return 0;
+}
+
+static int sa1100_irda_init_iobuf(iobuff_t *io, int size)
+{
+	io->head = kmalloc(size, GFP_KERNEL | GFP_DMA);
+	if (io->head != NULL) {
+		io->truesize = size;
+		io->in_frame = FALSE;
+		io->state    = OUTSIDE_FRAME;
+		io->data     = io->head;
+	}
+	return io->head ? 0 : -ENOMEM;
+}
+
+static const struct net_device_ops sa1100_irda_netdev_ops = {
+	.ndo_open		= sa1100_irda_start,
+	.ndo_stop		= sa1100_irda_stop,
+	.ndo_start_xmit		= sa1100_irda_hard_xmit,
+	.ndo_do_ioctl		= sa1100_irda_ioctl,
+};
+
+static int sa1100_irda_probe(struct platform_device *pdev)
+{
+	struct net_device *dev;
+	struct sa1100_irda *si;
+	unsigned int baudrate_mask;
+	int err, irq;
+
+	if (!pdev->dev.platform_data)
+		return -EINVAL;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq <= 0)
+		return irq < 0 ? irq : -ENXIO;
+
+	err = request_mem_region(__PREG(Ser2UTCR0), 0x24, "IrDA") ? 0 : -EBUSY;
+	if (err)
+		goto err_mem_1;
+	err = request_mem_region(__PREG(Ser2HSCR0), 0x1c, "IrDA") ? 0 : -EBUSY;
+	if (err)
+		goto err_mem_2;
+	err = request_mem_region(__PREG(Ser2HSCR2), 0x04, "IrDA") ? 0 : -EBUSY;
+	if (err)
+		goto err_mem_3;
+
+	dev = alloc_irdadev(sizeof(struct sa1100_irda));
+	if (!dev) {
+		err = -ENOMEM;
+		goto err_mem_4;
+	}
+
+	SET_NETDEV_DEV(dev, &pdev->dev);
+
+	si = netdev_priv(dev);
+	si->dev = &pdev->dev;
+	si->pdata = pdev->dev.platform_data;
+
+	sg_init_table(&si->dma_rx.sg, 1);
+	sg_init_table(&si->dma_tx.sg, 1);
+
+	/*
+	 * Initialise the HP-SIR buffers
+	 */
+	err = sa1100_irda_init_iobuf(&si->rx_buff, 14384);
+	if (err)
+		goto err_mem_5;
+	err = sa1100_irda_init_iobuf(&si->tx_buff, IRDA_SIR_MAX_FRAME);
+	if (err)
+		goto err_mem_5;
+
+	dev->netdev_ops	= &sa1100_irda_netdev_ops;
+	dev->irq	= irq;
+
+	irda_init_max_qos_capabilies(&si->qos);
+
+	/*
+	 * We support original IRDA up to 115k2. (we don't currently
+	 * support 4Mbps).  Min Turn Time set to 1ms or greater.
+	 */
+	baudrate_mask = IR_9600;
+
+	switch (max_rate) {
+	case 4000000:		baudrate_mask |= IR_4000000 << 8;
+	case 115200:		baudrate_mask |= IR_115200;
+	case 57600:		baudrate_mask |= IR_57600;
+	case 38400:		baudrate_mask |= IR_38400;
+	case 19200:		baudrate_mask |= IR_19200;
+	}
+		
+	si->qos.baud_rate.bits &= baudrate_mask;
+	si->qos.min_turn_time.bits = 7;
+
+	irda_qos_bits_to_value(&si->qos);
+
+	si->utcr4 = UTCR4_HPSIR;
+	if (tx_lpm)
+		si->utcr4 |= UTCR4_Z1_6us;
+
+	/*
+	 * Initially enable HP-SIR modulation, and ensure that the port
+	 * is disabled.
+	 */
+	Ser2UTCR3 = 0;
+	Ser2UTCR4 = si->utcr4;
+	Ser2HSCR0 = HSCR0_UART;
+
+	err = register_netdev(dev);
+	if (err == 0)
+		platform_set_drvdata(pdev, dev);
+
+	if (err) {
+ err_mem_5:
+		kfree(si->tx_buff.head);
+		kfree(si->rx_buff.head);
+		free_netdev(dev);
+ err_mem_4:
+		release_mem_region(__PREG(Ser2HSCR2), 0x04);
+ err_mem_3:
+		release_mem_region(__PREG(Ser2HSCR0), 0x1c);
+ err_mem_2:
+		release_mem_region(__PREG(Ser2UTCR0), 0x24);
+	}
+ err_mem_1:
+	return err;
+}
+
+static int sa1100_irda_remove(struct platform_device *pdev)
+{
+	struct net_device *dev = platform_get_drvdata(pdev);
+
+	if (dev) {
+		struct sa1100_irda *si = netdev_priv(dev);
+		unregister_netdev(dev);
+		kfree(si->tx_buff.head);
+		kfree(si->rx_buff.head);
+		free_netdev(dev);
+	}
+
+	release_mem_region(__PREG(Ser2HSCR2), 0x04);
+	release_mem_region(__PREG(Ser2HSCR0), 0x1c);
+	release_mem_region(__PREG(Ser2UTCR0), 0x24);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+/*
+ * Suspend the IrDA interface.
+ */
+static int sa1100_irda_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct net_device *dev = platform_get_drvdata(pdev);
+	struct sa1100_irda *si;
+
+	if (!dev)
+		return 0;
+
+	si = netdev_priv(dev);
+	if (si->open) {
+		/*
+		 * Stop the transmit queue
+		 */
+		netif_device_detach(dev);
+		disable_irq(dev->irq);
+		sa1100_irda_shutdown(si);
+		__sa1100_irda_set_power(si, 0);
+	}
+
+	return 0;
+}
+
+/*
+ * Resume the IrDA interface.
+ */
+static int sa1100_irda_resume(struct platform_device *pdev)
+{
+	struct net_device *dev = platform_get_drvdata(pdev);
+	struct sa1100_irda *si;
+
+	if (!dev)
+		return 0;
+
+	si = netdev_priv(dev);
+	if (si->open) {
+		/*
+		 * If we missed a speed change, initialise at the new speed
+		 * directly.  It is debatable whether this is actually
+		 * required, but in the interests of continuing from where
+		 * we left off it is desirable.  The converse argument is
+		 * that we should re-negotiate at 9600 baud again.
+		 */
+		if (si->newspeed) {
+			si->speed = si->newspeed;
+			si->newspeed = 0;
+		}
+
+		sa1100_irda_startup(si);
+		__sa1100_irda_set_power(si, si->power);
+		enable_irq(dev->irq);
+
+		/*
+		 * This automatically wakes up the queue
+		 */
+		netif_device_attach(dev);
+	}
+
+	return 0;
+}
+#else
+#define sa1100_irda_suspend	NULL
+#define sa1100_irda_resume	NULL
+#endif
+
+static struct platform_driver sa1100ir_driver = {
+	.probe		= sa1100_irda_probe,
+	.remove		= sa1100_irda_remove,
+	.suspend	= sa1100_irda_suspend,
+	.resume		= sa1100_irda_resume,
+	.driver		= {
+		.name	= "sa11x0-ir",
+	},
+};
+
+static int __init sa1100_irda_init(void)
+{
+	/*
+	 * Limit power level a sensible range.
+	 */
+	if (power_level < 1)
+		power_level = 1;
+	if (power_level > 3)
+		power_level = 3;
+
+	return platform_driver_register(&sa1100ir_driver);
+}
+
+static void __exit sa1100_irda_exit(void)
+{
+	platform_driver_unregister(&sa1100ir_driver);
+}
+
+module_init(sa1100_irda_init);
+module_exit(sa1100_irda_exit);
+module_param(power_level, int, 0);
+module_param(tx_lpm, int, 0);
+module_param(max_rate, int, 0);
+
+MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>");
+MODULE_DESCRIPTION("StrongARM SA1100 IrDA driver");
+MODULE_LICENSE("GPL");
+MODULE_PARM_DESC(power_level, "IrDA power level, 1 (low) to 3 (high)");
+MODULE_PARM_DESC(tx_lpm, "Enable transmitter low power (1.6us) mode");
+MODULE_PARM_DESC(max_rate, "Maximum baud rate (4000000, 115200, 57600, 38400, 19200, 9600)");
+MODULE_ALIAS("platform:sa11x0-ir");