Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

1 files changed, 979 insertions, 0 deletions

diff --git a/kernel/drivers/net/irda/pxaficp_ir.c b/kernel/drivers/net/irda/pxaficp_ir.c
new file mode 100644
index 000000000..100454662
--- /dev/null
+++ b/kernel/drivers/net/irda/pxaficp_ir.c
@@ -0,0 +1,979 @@
+/*
+ * linux/drivers/net/irda/pxaficp_ir.c
+ *
+ * Based on sa1100_ir.c by Russell King
+ *
+ * Changes copyright (C) 2003-2005 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Infra-red driver (SIR/FIR) for the PXA2xx embedded microprocessor
+ *
+ */
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/slab.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irmod.h>
+#include <net/irda/wrapper.h>
+#include <net/irda/irda_device.h>
+
+#include <mach/dma.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <mach/regs-ost.h>
+#include <mach/regs-uart.h>
+
+#define FICP		__REG(0x40800000)  /* Start of FICP area */
+#define ICCR0		__REG(0x40800000)  /* ICP Control Register 0 */
+#define ICCR1		__REG(0x40800004)  /* ICP Control Register 1 */
+#define ICCR2		__REG(0x40800008)  /* ICP Control Register 2 */
+#define ICDR		__REG(0x4080000c)  /* ICP Data Register */
+#define ICSR0		__REG(0x40800014)  /* ICP Status Register 0 */
+#define ICSR1		__REG(0x40800018)  /* ICP Status Register 1 */
+
+#define ICCR0_AME	(1 << 7)	/* Address match enable */
+#define ICCR0_TIE	(1 << 6)	/* Transmit FIFO interrupt enable */
+#define ICCR0_RIE	(1 << 5)	/* Receive FIFO interrupt enable */
+#define ICCR0_RXE	(1 << 4)	/* Receive enable */
+#define ICCR0_TXE	(1 << 3)	/* Transmit enable */
+#define ICCR0_TUS	(1 << 2)	/* Transmit FIFO underrun select */
+#define ICCR0_LBM	(1 << 1)	/* Loopback mode */
+#define ICCR0_ITR	(1 << 0)	/* IrDA transmission */
+
+#define ICCR2_RXP       (1 << 3)	/* Receive Pin Polarity select */
+#define ICCR2_TXP       (1 << 2)	/* Transmit Pin Polarity select */
+#define ICCR2_TRIG	(3 << 0)	/* Receive FIFO Trigger threshold */
+#define ICCR2_TRIG_8    (0 << 0)	/* 	>= 8 bytes */
+#define ICCR2_TRIG_16   (1 << 0)	/*	>= 16 bytes */
+#define ICCR2_TRIG_32   (2 << 0)	/*	>= 32 bytes */
+
+#ifdef CONFIG_PXA27x
+#define ICSR0_EOC	(1 << 6)	/* DMA End of Descriptor Chain */
+#endif
+#define ICSR0_FRE	(1 << 5)	/* Framing error */
+#define ICSR0_RFS	(1 << 4)	/* Receive FIFO service request */
+#define ICSR0_TFS	(1 << 3)	/* Transnit FIFO service request */
+#define ICSR0_RAB	(1 << 2)	/* Receiver abort */
+#define ICSR0_TUR	(1 << 1)	/* Trunsmit FIFO underun */
+#define ICSR0_EIF	(1 << 0)	/* End/Error in FIFO */
+
+#define ICSR1_ROR	(1 << 6)	/* Receiver FIFO underrun  */
+#define ICSR1_CRE	(1 << 5)	/* CRC error */
+#define ICSR1_EOF	(1 << 4)	/* End of frame */
+#define ICSR1_TNF	(1 << 3)	/* Transmit FIFO not full */
+#define ICSR1_RNE	(1 << 2)	/* Receive FIFO not empty */
+#define ICSR1_TBY	(1 << 1)	/* Tramsmiter busy flag */
+#define ICSR1_RSY	(1 << 0)	/* Recevier synchronized flag */
+
+#define IrSR_RXPL_NEG_IS_ZERO (1<<4)
+#define IrSR_RXPL_POS_IS_ZERO 0x0
+#define IrSR_TXPL_NEG_IS_ZERO (1<<3)
+#define IrSR_TXPL_POS_IS_ZERO 0x0
+#define IrSR_XMODE_PULSE_1_6  (1<<2)
+#define IrSR_XMODE_PULSE_3_16 0x0
+#define IrSR_RCVEIR_IR_MODE   (1<<1)
+#define IrSR_RCVEIR_UART_MODE 0x0
+#define IrSR_XMITIR_IR_MODE   (1<<0)
+#define IrSR_XMITIR_UART_MODE 0x0
+
+#define IrSR_IR_RECEIVE_ON (\
+                IrSR_RXPL_NEG_IS_ZERO | \
+                IrSR_TXPL_POS_IS_ZERO | \
+                IrSR_XMODE_PULSE_3_16 | \
+                IrSR_RCVEIR_IR_MODE   | \
+                IrSR_XMITIR_UART_MODE)
+
+#define IrSR_IR_TRANSMIT_ON (\
+                IrSR_RXPL_NEG_IS_ZERO | \
+                IrSR_TXPL_POS_IS_ZERO | \
+                IrSR_XMODE_PULSE_3_16 | \
+                IrSR_RCVEIR_UART_MODE | \
+                IrSR_XMITIR_IR_MODE)
+
+struct pxa_irda {
+	int			speed;
+	int			newspeed;
+	unsigned long		last_oscr;
+
+	unsigned char		*dma_rx_buff;
+	unsigned char		*dma_tx_buff;
+	dma_addr_t		dma_rx_buff_phy;
+	dma_addr_t		dma_tx_buff_phy;
+	unsigned int		dma_tx_buff_len;
+	int			txdma;
+	int			rxdma;
+
+	int			uart_irq;
+	int			icp_irq;
+
+	struct irlap_cb		*irlap;
+	struct qos_info		qos;
+
+	iobuff_t		tx_buff;
+	iobuff_t		rx_buff;
+
+	struct device		*dev;
+	struct pxaficp_platform_data *pdata;
+	struct clk		*fir_clk;
+	struct clk		*sir_clk;
+	struct clk		*cur_clk;
+};
+
+static inline void pxa_irda_disable_clk(struct pxa_irda *si)
+{
+	if (si->cur_clk)
+		clk_disable_unprepare(si->cur_clk);
+	si->cur_clk = NULL;
+}
+
+static inline void pxa_irda_enable_firclk(struct pxa_irda *si)
+{
+	si->cur_clk = si->fir_clk;
+	clk_prepare_enable(si->fir_clk);
+}
+
+static inline void pxa_irda_enable_sirclk(struct pxa_irda *si)
+{
+	si->cur_clk = si->sir_clk;
+	clk_prepare_enable(si->sir_clk);
+}
+
+
+#define IS_FIR(si)		((si)->speed >= 4000000)
+#define IRDA_FRAME_SIZE_LIMIT	2047
+
+inline static void pxa_irda_fir_dma_rx_start(struct pxa_irda *si)
+{
+	DCSR(si->rxdma)  = DCSR_NODESC;
+	DSADR(si->rxdma) = __PREG(ICDR);
+	DTADR(si->rxdma) = si->dma_rx_buff_phy;
+	DCMD(si->rxdma) = DCMD_INCTRGADDR | DCMD_FLOWSRC |  DCMD_WIDTH1 | DCMD_BURST32 | IRDA_FRAME_SIZE_LIMIT;
+	DCSR(si->rxdma) |= DCSR_RUN;
+}
+
+inline static void pxa_irda_fir_dma_tx_start(struct pxa_irda *si)
+{
+	DCSR(si->txdma)  = DCSR_NODESC;
+	DSADR(si->txdma) = si->dma_tx_buff_phy;
+	DTADR(si->txdma) = __PREG(ICDR);
+	DCMD(si->txdma) = DCMD_INCSRCADDR | DCMD_FLOWTRG |  DCMD_ENDIRQEN | DCMD_WIDTH1 | DCMD_BURST32 | si->dma_tx_buff_len;
+	DCSR(si->txdma) |= DCSR_RUN;
+}
+
+/*
+ * Set the IrDA communications mode.
+ */
+static void pxa_irda_set_mode(struct pxa_irda *si, int mode)
+{
+	if (si->pdata->transceiver_mode)
+		si->pdata->transceiver_mode(si->dev, mode);
+	else {
+		if (gpio_is_valid(si->pdata->gpio_pwdown))
+			gpio_set_value(si->pdata->gpio_pwdown,
+					!(mode & IR_OFF) ^
+					!si->pdata->gpio_pwdown_inverted);
+		pxa2xx_transceiver_mode(si->dev, mode);
+	}
+}
+
+/*
+ * Set the IrDA communications speed.
+ */
+static int pxa_irda_set_speed(struct pxa_irda *si, int speed)
+{
+	unsigned long flags;
+	unsigned int divisor;
+
+	switch (speed) {
+	case 9600:	case 19200:	case 38400:
+	case 57600:	case 115200:
+
+		/* refer to PXA250/210 Developer's Manual 10-7 */
+		/*  BaudRate = 14.7456 MHz / (16*Divisor) */
+		divisor = 14745600 / (16 * speed);
+
+		local_irq_save(flags);
+
+		if (IS_FIR(si)) {
+			/* stop RX DMA */
+			DCSR(si->rxdma) &= ~DCSR_RUN;
+			/* disable FICP */
+			ICCR0 = 0;
+			pxa_irda_disable_clk(si);
+
+			/* set board transceiver to SIR mode */
+			pxa_irda_set_mode(si, IR_SIRMODE);
+
+			/* enable the STUART clock */
+			pxa_irda_enable_sirclk(si);
+		}
+
+		/* disable STUART first */
+		STIER = 0;
+
+		/* access DLL & DLH */
+		STLCR |= LCR_DLAB;
+		STDLL = divisor & 0xff;
+		STDLH = divisor >> 8;
+		STLCR &= ~LCR_DLAB;
+
+		si->speed = speed;
+		STISR = IrSR_IR_RECEIVE_ON | IrSR_XMODE_PULSE_1_6;
+		STIER = IER_UUE | IER_RLSE | IER_RAVIE | IER_RTIOE;
+
+		local_irq_restore(flags);
+		break;
+
+	case 4000000:
+		local_irq_save(flags);
+
+		/* disable STUART */
+		STIER = 0;
+		STISR = 0;
+		pxa_irda_disable_clk(si);
+
+		/* disable FICP first */
+		ICCR0 = 0;
+
+		/* set board transceiver to FIR mode */
+		pxa_irda_set_mode(si, IR_FIRMODE);
+
+		/* enable the FICP clock */
+		pxa_irda_enable_firclk(si);
+
+		si->speed = speed;
+		pxa_irda_fir_dma_rx_start(si);
+		ICCR0 = ICCR0_ITR | ICCR0_RXE;
+
+		local_irq_restore(flags);
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/* SIR interrupt service routine. */
+static irqreturn_t pxa_irda_sir_irq(int irq, void *dev_id)
+{
+	struct net_device *dev = dev_id;
+	struct pxa_irda *si = netdev_priv(dev);
+	int iir, lsr, data;
+
+	iir = STIIR;
+
+	switch  (iir & 0x0F) {
+	case 0x06: /* Receiver Line Status */
+	  	lsr = STLSR;
+		while (lsr & LSR_FIFOE) {
+			data = STRBR;
+			if (lsr & (LSR_OE | LSR_PE | LSR_FE | LSR_BI)) {
+				printk(KERN_DEBUG "pxa_ir: sir receiving error\n");
+				dev->stats.rx_errors++;
+				if (lsr & LSR_FE)
+					dev->stats.rx_frame_errors++;
+				if (lsr & LSR_OE)
+					dev->stats.rx_fifo_errors++;
+			} else {
+				dev->stats.rx_bytes++;
+				async_unwrap_char(dev, &dev->stats,
+						  &si->rx_buff, data);
+			}
+			lsr = STLSR;
+		}
+		si->last_oscr = readl_relaxed(OSCR);
+		break;
+
+	case 0x04: /* Received Data Available */
+	  	   /* forth through */
+
+	case 0x0C: /* Character Timeout Indication */
+	  	do  {
+		    dev->stats.rx_bytes++;
+	            async_unwrap_char(dev, &dev->stats, &si->rx_buff, STRBR);
+	  	} while (STLSR & LSR_DR);
+		si->last_oscr = readl_relaxed(OSCR);
+	  	break;
+
+	case 0x02: /* Transmit FIFO Data Request */
+	    	while ((si->tx_buff.len) && (STLSR & LSR_TDRQ)) {
+	    		STTHR = *si->tx_buff.data++;
+			si->tx_buff.len -= 1;
+	    	}
+
+		if (si->tx_buff.len == 0) {
+			dev->stats.tx_packets++;
+			dev->stats.tx_bytes += si->tx_buff.data - si->tx_buff.head;
+
+                        /* We need to ensure that the transmitter has finished. */
+			while ((STLSR & LSR_TEMT) == 0)
+				cpu_relax();
+			si->last_oscr = readl_relaxed(OSCR);
+
+			/*
+		 	* Ok, we've finished transmitting.  Now enable
+		 	* the receiver.  Sometimes we get a receive IRQ
+		 	* immediately after a transmit...
+		 	*/
+			if (si->newspeed) {
+				pxa_irda_set_speed(si, si->newspeed);
+				si->newspeed = 0;
+			} else {
+				/* enable IR Receiver, disable IR Transmitter */
+				STISR = IrSR_IR_RECEIVE_ON | IrSR_XMODE_PULSE_1_6;
+				/* enable STUART and receive interrupts */
+				STIER = IER_UUE | IER_RLSE | IER_RAVIE | IER_RTIOE;
+			}
+			/* I'm hungry! */
+			netif_wake_queue(dev);
+		}
+		break;
+	}
+
+	return IRQ_HANDLED;
+}
+
+/* FIR Receive DMA interrupt handler */
+static void pxa_irda_fir_dma_rx_irq(int channel, void *data)
+{
+	int dcsr = DCSR(channel);
+
+	DCSR(channel) = dcsr & ~DCSR_RUN;
+
+	printk(KERN_DEBUG "pxa_ir: fir rx dma bus error %#x\n", dcsr);
+}
+
+/* FIR Transmit DMA interrupt handler */
+static void pxa_irda_fir_dma_tx_irq(int channel, void *data)
+{
+	struct net_device *dev = data;
+	struct pxa_irda *si = netdev_priv(dev);
+	int dcsr;
+
+	dcsr = DCSR(channel);
+	DCSR(channel) = dcsr & ~DCSR_RUN;
+
+	if (dcsr & DCSR_ENDINTR)  {
+		dev->stats.tx_packets++;
+		dev->stats.tx_bytes += si->dma_tx_buff_len;
+	} else {
+		dev->stats.tx_errors++;
+	}
+
+	while (ICSR1 & ICSR1_TBY)
+		cpu_relax();
+	si->last_oscr = readl_relaxed(OSCR);
+
+	/*
+	 * HACK: It looks like the TBY bit is dropped too soon.
+	 * Without this delay things break.
+	 */
+	udelay(120);
+
+	if (si->newspeed) {
+		pxa_irda_set_speed(si, si->newspeed);
+		si->newspeed = 0;
+	} else {
+		int i = 64;
+
+		ICCR0 = 0;
+		pxa_irda_fir_dma_rx_start(si);
+		while ((ICSR1 & ICSR1_RNE) && i--)
+			(void)ICDR;
+		ICCR0 = ICCR0_ITR | ICCR0_RXE;
+
+		if (i < 0)
+			printk(KERN_ERR "pxa_ir: cannot clear Rx FIFO!\n");
+	}
+	netif_wake_queue(dev);
+}
+
+/* EIF(Error in FIFO/End in Frame) handler for FIR */
+static void pxa_irda_fir_irq_eif(struct pxa_irda *si, struct net_device *dev, int icsr0)
+{
+	unsigned int len, stat, data;
+
+	/* Get the current data position. */
+	len = DTADR(si->rxdma) - si->dma_rx_buff_phy;
+
+	do {
+		/* Read Status, and then Data. 	 */
+		stat = ICSR1;
+		rmb();
+		data = ICDR;
+
+		if (stat & (ICSR1_CRE | ICSR1_ROR)) {
+			dev->stats.rx_errors++;
+			if (stat & ICSR1_CRE) {
+				printk(KERN_DEBUG "pxa_ir: fir receive CRC error\n");
+				dev->stats.rx_crc_errors++;
+			}
+			if (stat & ICSR1_ROR) {
+				printk(KERN_DEBUG "pxa_ir: fir receive overrun\n");
+				dev->stats.rx_over_errors++;
+			}
+		} else	{
+			si->dma_rx_buff[len++] = data;
+		}
+		/* If we hit the end of frame, there's no point in continuing. */
+		if (stat & ICSR1_EOF)
+			break;
+	} while (ICSR0 & ICSR0_EIF);
+
+	if (stat & ICSR1_EOF) {
+		/* end of frame. */
+		struct sk_buff *skb;
+
+		if (icsr0 & ICSR0_FRE) {
+			printk(KERN_ERR "pxa_ir: dropping erroneous frame\n");
+			dev->stats.rx_dropped++;
+			return;
+		}
+
+		skb = alloc_skb(len+1,GFP_ATOMIC);
+		if (!skb)  {
+			printk(KERN_ERR "pxa_ir: fir out of memory for receive skb\n");
+			dev->stats.rx_dropped++;
+			return;
+		}
+
+		/* Align IP header to 20 bytes  */
+		skb_reserve(skb, 1);
+		skb_copy_to_linear_data(skb, si->dma_rx_buff, len);
+		skb_put(skb, len);
+
+		/* Feed it to IrLAP  */
+		skb->dev = dev;
+		skb_reset_mac_header(skb);
+		skb->protocol = htons(ETH_P_IRDA);
+		netif_rx(skb);
+
+		dev->stats.rx_packets++;
+		dev->stats.rx_bytes += len;
+	}
+}
+
+/* FIR interrupt handler */
+static irqreturn_t pxa_irda_fir_irq(int irq, void *dev_id)
+{
+	struct net_device *dev = dev_id;
+	struct pxa_irda *si = netdev_priv(dev);
+	int icsr0, i = 64;
+
+	/* stop RX DMA */
+	DCSR(si->rxdma) &= ~DCSR_RUN;
+	si->last_oscr = readl_relaxed(OSCR);
+	icsr0 = ICSR0;
+
+	if (icsr0 & (ICSR0_FRE | ICSR0_RAB)) {
+		if (icsr0 & ICSR0_FRE) {
+		        printk(KERN_DEBUG "pxa_ir: fir receive frame error\n");
+			dev->stats.rx_frame_errors++;
+		} else {
+			printk(KERN_DEBUG "pxa_ir: fir receive abort\n");
+			dev->stats.rx_errors++;
+		}
+		ICSR0 = icsr0 & (ICSR0_FRE | ICSR0_RAB);
+	}
+
+	if (icsr0 & ICSR0_EIF) {
+		/* An error in FIFO occurred, or there is a end of frame */
+		pxa_irda_fir_irq_eif(si, dev, icsr0);
+	}
+
+	ICCR0 = 0;
+	pxa_irda_fir_dma_rx_start(si);
+	while ((ICSR1 & ICSR1_RNE) && i--)
+		(void)ICDR;
+	ICCR0 = ICCR0_ITR | ICCR0_RXE;
+
+	if (i < 0)
+		printk(KERN_ERR "pxa_ir: cannot clear Rx FIFO!\n");
+
+	return IRQ_HANDLED;
+}
+
+/* hard_xmit interface of irda device */
+static int pxa_irda_hard_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	struct pxa_irda *si = netdev_priv(dev);
+	int speed = irda_get_next_speed(skb);
+
+	/*
+	 * Does this packet contain a request to change the interface
+	 * speed?  If so, remember it until we complete the transmission
+	 * of this frame.
+	 */
+	if (speed != si->speed && speed != -1)
+		si->newspeed = speed;
+
+	/*
+	 * If this is an empty frame, we can bypass a lot.
+	 */
+	if (skb->len == 0) {
+		if (si->newspeed) {
+			si->newspeed = 0;
+			pxa_irda_set_speed(si, speed);
+		}
+		dev_kfree_skb(skb);
+		return NETDEV_TX_OK;
+	}
+
+	netif_stop_queue(dev);
+
+	if (!IS_FIR(si)) {
+		si->tx_buff.data = si->tx_buff.head;
+		si->tx_buff.len  = async_wrap_skb(skb, si->tx_buff.data, si->tx_buff.truesize);
+
+		/* Disable STUART interrupts and switch to transmit mode. */
+		STIER = 0;
+		STISR = IrSR_IR_TRANSMIT_ON | IrSR_XMODE_PULSE_1_6;
+
+		/* enable STUART and transmit interrupts */
+		STIER = IER_UUE | IER_TIE;
+	} else {
+		unsigned long mtt = irda_get_mtt(skb);
+
+		si->dma_tx_buff_len = skb->len;
+		skb_copy_from_linear_data(skb, si->dma_tx_buff, skb->len);
+
+		if (mtt)
+			while ((unsigned)(readl_relaxed(OSCR) - si->last_oscr)/4 < mtt)
+				cpu_relax();
+
+		/* stop RX DMA,  disable FICP */
+		DCSR(si->rxdma) &= ~DCSR_RUN;
+		ICCR0 = 0;
+
+		pxa_irda_fir_dma_tx_start(si);
+		ICCR0 = ICCR0_ITR | ICCR0_TXE;
+	}
+
+	dev_kfree_skb(skb);
+	return NETDEV_TX_OK;
+}
+
+static int pxa_irda_ioctl(struct net_device *dev, struct ifreq *ifreq, int cmd)
+{
+	struct if_irda_req *rq = (struct if_irda_req *)ifreq;
+	struct pxa_irda *si = netdev_priv(dev);
+	int ret;
+
+	switch (cmd) {
+	case SIOCSBANDWIDTH:
+		ret = -EPERM;
+		if (capable(CAP_NET_ADMIN)) {
+			/*
+			 * We are unable to set the speed if the
+			 * device is not running.
+			 */
+			if (netif_running(dev)) {
+				ret = pxa_irda_set_speed(si,
+						rq->ifr_baudrate);
+			} else {
+				printk(KERN_INFO "pxa_ir: SIOCSBANDWIDTH: !netif_running\n");
+				ret = 0;
+			}
+		}
+		break;
+
+	case SIOCSMEDIABUSY:
+		ret = -EPERM;
+		if (capable(CAP_NET_ADMIN)) {
+			irda_device_set_media_busy(dev, TRUE);
+			ret = 0;
+		}
+		break;
+
+	case SIOCGRECEIVING:
+		ret = 0;
+		rq->ifr_receiving = IS_FIR(si) ? 0
+					: si->rx_buff.state != OUTSIDE_FRAME;
+		break;
+
+	default:
+		ret = -EOPNOTSUPP;
+		break;
+	}
+
+	return ret;
+}
+
+static void pxa_irda_startup(struct pxa_irda *si)
+{
+	/* Disable STUART interrupts */
+	STIER = 0;
+	/* enable STUART interrupt to the processor */
+	STMCR = MCR_OUT2;
+	/* configure SIR frame format: StartBit - Data 7 ... Data 0 - Stop Bit */
+	STLCR = LCR_WLS0 | LCR_WLS1;
+	/* enable FIFO, we use FIFO to improve performance */
+	STFCR = FCR_TRFIFOE | FCR_ITL_32;
+
+	/* disable FICP */
+	ICCR0 = 0;
+	/* configure FICP ICCR2 */
+	ICCR2 = ICCR2_TXP | ICCR2_TRIG_32;
+
+	/* configure DMAC */
+	DRCMR(17) = si->rxdma | DRCMR_MAPVLD;
+	DRCMR(18) = si->txdma | DRCMR_MAPVLD;
+
+	/* force SIR reinitialization */
+	si->speed = 4000000;
+	pxa_irda_set_speed(si, 9600);
+
+	printk(KERN_DEBUG "pxa_ir: irda startup\n");
+}
+
+static void pxa_irda_shutdown(struct pxa_irda *si)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	/* disable STUART and interrupt */
+	STIER = 0;
+	/* disable STUART SIR mode */
+	STISR = 0;
+
+	/* disable DMA */
+	DCSR(si->txdma) &= ~DCSR_RUN;
+	DCSR(si->rxdma) &= ~DCSR_RUN;
+	/* disable FICP */
+	ICCR0 = 0;
+
+	/* disable the STUART or FICP clocks */
+	pxa_irda_disable_clk(si);
+
+	DRCMR(17) = 0;
+	DRCMR(18) = 0;
+
+	local_irq_restore(flags);
+
+	/* power off board transceiver */
+	pxa_irda_set_mode(si, IR_OFF);
+
+	printk(KERN_DEBUG "pxa_ir: irda shutdown\n");
+}
+
+static int pxa_irda_start(struct net_device *dev)
+{
+	struct pxa_irda *si = netdev_priv(dev);
+	int err;
+
+	si->speed = 9600;
+
+	err = request_irq(si->uart_irq, pxa_irda_sir_irq, 0, dev->name, dev);
+	if (err)
+		goto err_irq1;
+
+	err = request_irq(si->icp_irq, pxa_irda_fir_irq, 0, dev->name, dev);
+	if (err)
+		goto err_irq2;
+
+	/*
+	 * The interrupt must remain disabled for now.
+	 */
+	disable_irq(si->uart_irq);
+	disable_irq(si->icp_irq);
+
+	err = -EBUSY;
+	si->rxdma = pxa_request_dma("FICP_RX",DMA_PRIO_LOW, pxa_irda_fir_dma_rx_irq, dev);
+	if (si->rxdma < 0)
+		goto err_rx_dma;
+
+	si->txdma = pxa_request_dma("FICP_TX",DMA_PRIO_LOW, pxa_irda_fir_dma_tx_irq, dev);
+	if (si->txdma < 0)
+		goto err_tx_dma;
+
+	err = -ENOMEM;
+	si->dma_rx_buff = dma_alloc_coherent(si->dev, IRDA_FRAME_SIZE_LIMIT,
+					     &si->dma_rx_buff_phy, GFP_KERNEL);
+	if (!si->dma_rx_buff)
+		goto err_dma_rx_buff;
+
+	si->dma_tx_buff = dma_alloc_coherent(si->dev, IRDA_FRAME_SIZE_LIMIT,
+					     &si->dma_tx_buff_phy, GFP_KERNEL);
+	if (!si->dma_tx_buff)
+		goto err_dma_tx_buff;
+
+	/* Setup the serial port for the initial speed. */
+	pxa_irda_startup(si);
+
+	/*
+	 * Open a new IrLAP layer instance.
+	 */
+	si->irlap = irlap_open(dev, &si->qos, "pxa");
+	err = -ENOMEM;
+	if (!si->irlap)
+		goto err_irlap;
+
+	/*
+	 * Now enable the interrupt and start the queue
+	 */
+	enable_irq(si->uart_irq);
+	enable_irq(si->icp_irq);
+	netif_start_queue(dev);
+
+	printk(KERN_DEBUG "pxa_ir: irda driver opened\n");
+
+	return 0;
+
+err_irlap:
+	pxa_irda_shutdown(si);
+	dma_free_coherent(si->dev, IRDA_FRAME_SIZE_LIMIT, si->dma_tx_buff, si->dma_tx_buff_phy);
+err_dma_tx_buff:
+	dma_free_coherent(si->dev, IRDA_FRAME_SIZE_LIMIT, si->dma_rx_buff, si->dma_rx_buff_phy);
+err_dma_rx_buff:
+	pxa_free_dma(si->txdma);
+err_tx_dma:
+	pxa_free_dma(si->rxdma);
+err_rx_dma:
+	free_irq(si->icp_irq, dev);
+err_irq2:
+	free_irq(si->uart_irq, dev);
+err_irq1:
+
+	return err;
+}
+
+static int pxa_irda_stop(struct net_device *dev)
+{
+	struct pxa_irda *si = netdev_priv(dev);
+
+	netif_stop_queue(dev);
+
+	pxa_irda_shutdown(si);
+
+	/* Stop IrLAP */
+	if (si->irlap) {
+		irlap_close(si->irlap);
+		si->irlap = NULL;
+	}
+
+	free_irq(si->uart_irq, dev);
+	free_irq(si->icp_irq, dev);
+
+	pxa_free_dma(si->rxdma);
+	pxa_free_dma(si->txdma);
+
+	if (si->dma_rx_buff)
+		dma_free_coherent(si->dev, IRDA_FRAME_SIZE_LIMIT, si->dma_tx_buff, si->dma_tx_buff_phy);
+	if (si->dma_tx_buff)
+		dma_free_coherent(si->dev, IRDA_FRAME_SIZE_LIMIT, si->dma_rx_buff, si->dma_rx_buff_phy);
+
+	printk(KERN_DEBUG "pxa_ir: irda driver closed\n");
+	return 0;
+}
+
+static int pxa_irda_suspend(struct platform_device *_dev, pm_message_t state)
+{
+	struct net_device *dev = platform_get_drvdata(_dev);
+	struct pxa_irda *si;
+
+	if (dev && netif_running(dev)) {
+		si = netdev_priv(dev);
+		netif_device_detach(dev);
+		pxa_irda_shutdown(si);
+	}
+
+	return 0;
+}
+
+static int pxa_irda_resume(struct platform_device *_dev)
+{
+	struct net_device *dev = platform_get_drvdata(_dev);
+	struct pxa_irda *si;
+
+	if (dev && netif_running(dev)) {
+		si = netdev_priv(dev);
+		pxa_irda_startup(si);
+		netif_device_attach(dev);
+		netif_wake_queue(dev);
+	}
+
+	return 0;
+}
+
+
+static int pxa_irda_init_iobuf(iobuff_t *io, int size)
+{
+	io->head = kmalloc(size, GFP_KERNEL | GFP_DMA);
+	if (io->head != NULL) {
+		io->truesize = size;
+		io->in_frame = FALSE;
+		io->state    = OUTSIDE_FRAME;
+		io->data     = io->head;
+	}
+	return io->head ? 0 : -ENOMEM;
+}
+
+static const struct net_device_ops pxa_irda_netdev_ops = {
+	.ndo_open		= pxa_irda_start,
+	.ndo_stop		= pxa_irda_stop,
+	.ndo_start_xmit		= pxa_irda_hard_xmit,
+	.ndo_do_ioctl		= pxa_irda_ioctl,
+};
+
+static int pxa_irda_probe(struct platform_device *pdev)
+{
+	struct net_device *dev;
+	struct pxa_irda *si;
+	unsigned int baudrate_mask;
+	int err;
+
+	if (!pdev->dev.platform_data)
+		return -ENODEV;
+
+	err = request_mem_region(__PREG(STUART), 0x24, "IrDA") ? 0 : -EBUSY;
+	if (err)
+		goto err_mem_1;
+
+	err = request_mem_region(__PREG(FICP), 0x1c, "IrDA") ? 0 : -EBUSY;
+	if (err)
+		goto err_mem_2;
+
+	dev = alloc_irdadev(sizeof(struct pxa_irda));
+	if (!dev) {
+		err = -ENOMEM;
+		goto err_mem_3;
+	}
+
+	SET_NETDEV_DEV(dev, &pdev->dev);
+	si = netdev_priv(dev);
+	si->dev = &pdev->dev;
+	si->pdata = pdev->dev.platform_data;
+
+	si->uart_irq = platform_get_irq(pdev, 0);
+	si->icp_irq = platform_get_irq(pdev, 1);
+
+	si->sir_clk = clk_get(&pdev->dev, "UARTCLK");
+	si->fir_clk = clk_get(&pdev->dev, "FICPCLK");
+	if (IS_ERR(si->sir_clk) || IS_ERR(si->fir_clk)) {
+		err = PTR_ERR(IS_ERR(si->sir_clk) ? si->sir_clk : si->fir_clk);
+		goto err_mem_4;
+	}
+
+	/*
+	 * Initialise the SIR buffers
+	 */
+	err = pxa_irda_init_iobuf(&si->rx_buff, 14384);
+	if (err)
+		goto err_mem_4;
+	err = pxa_irda_init_iobuf(&si->tx_buff, 4000);
+	if (err)
+		goto err_mem_5;
+
+	if (gpio_is_valid(si->pdata->gpio_pwdown)) {
+		err = gpio_request(si->pdata->gpio_pwdown, "IrDA switch");
+		if (err)
+			goto err_startup;
+		err = gpio_direction_output(si->pdata->gpio_pwdown,
+					!si->pdata->gpio_pwdown_inverted);
+		if (err) {
+			gpio_free(si->pdata->gpio_pwdown);
+			goto err_startup;
+		}
+	}
+
+	if (si->pdata->startup) {
+		err = si->pdata->startup(si->dev);
+		if (err)
+			goto err_startup;
+	}
+
+	if (gpio_is_valid(si->pdata->gpio_pwdown) && si->pdata->startup)
+		dev_warn(si->dev, "gpio_pwdown and startup() both defined!\n");
+
+	dev->netdev_ops = &pxa_irda_netdev_ops;
+
+	irda_init_max_qos_capabilies(&si->qos);
+
+	baudrate_mask = 0;
+	if (si->pdata->transceiver_cap & IR_SIRMODE)
+		baudrate_mask |= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200;
+	if (si->pdata->transceiver_cap & IR_FIRMODE)
+		baudrate_mask |= IR_4000000 << 8;
+
+	si->qos.baud_rate.bits &= baudrate_mask;
+	si->qos.min_turn_time.bits = 7;  /* 1ms or more */
+
+	irda_qos_bits_to_value(&si->qos);
+
+	err = register_netdev(dev);
+
+	if (err == 0)
+		platform_set_drvdata(pdev, dev);
+
+	if (err) {
+		if (si->pdata->shutdown)
+			si->pdata->shutdown(si->dev);
+err_startup:
+		kfree(si->tx_buff.head);
+err_mem_5:
+		kfree(si->rx_buff.head);
+err_mem_4:
+		if (si->sir_clk && !IS_ERR(si->sir_clk))
+			clk_put(si->sir_clk);
+		if (si->fir_clk && !IS_ERR(si->fir_clk))
+			clk_put(si->fir_clk);
+		free_netdev(dev);
+err_mem_3:
+		release_mem_region(__PREG(FICP), 0x1c);
+err_mem_2:
+		release_mem_region(__PREG(STUART), 0x24);
+	}
+err_mem_1:
+	return err;
+}
+
+static int pxa_irda_remove(struct platform_device *_dev)
+{
+	struct net_device *dev = platform_get_drvdata(_dev);
+
+	if (dev) {
+		struct pxa_irda *si = netdev_priv(dev);
+		unregister_netdev(dev);
+		if (gpio_is_valid(si->pdata->gpio_pwdown))
+			gpio_free(si->pdata->gpio_pwdown);
+		if (si->pdata->shutdown)
+			si->pdata->shutdown(si->dev);
+		kfree(si->tx_buff.head);
+		kfree(si->rx_buff.head);
+		clk_put(si->fir_clk);
+		clk_put(si->sir_clk);
+		free_netdev(dev);
+	}
+
+	release_mem_region(__PREG(STUART), 0x24);
+	release_mem_region(__PREG(FICP), 0x1c);
+
+	return 0;
+}
+
+static struct platform_driver pxa_ir_driver = {
+	.driver         = {
+		.name   = "pxa2xx-ir",
+	},
+	.probe		= pxa_irda_probe,
+	.remove		= pxa_irda_remove,
+	.suspend	= pxa_irda_suspend,
+	.resume		= pxa_irda_resume,
+};
+
+module_platform_driver(pxa_ir_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pxa2xx-ir");