summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/net/hamradio/Kconfig
diff options
context:
space:
mode:
authorYunhong Jiang <yunhong.jiang@intel.com>2015-08-04 12:17:53 -0700
committerYunhong Jiang <yunhong.jiang@intel.com>2015-08-04 15:44:42 -0700
commit9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 (patch)
tree1c9cafbcd35f783a87880a10f85d1a060db1a563 /kernel/drivers/net/hamradio/Kconfig
parent98260f3884f4a202f9ca5eabed40b1354c489b29 (diff)
Add the rt linux 4.1.3-rt3 as base
Import the rt linux 4.1.3-rt3 as OPNFV kvm base. It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and the base is: commit 0917f823c59692d751951bf5ea699a2d1e2f26a2 Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Date: Sat Jul 25 12:13:34 2015 +0200 Prepare v4.1.3-rt3 Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> We lose all the git history this way and it's not good. We should apply another opnfv project repo in future. Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423 Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>
Diffstat (limited to 'kernel/drivers/net/hamradio/Kconfig')
-rw-r--r--kernel/drivers/net/hamradio/Kconfig193
1 files changed, 193 insertions, 0 deletions
diff --git a/kernel/drivers/net/hamradio/Kconfig b/kernel/drivers/net/hamradio/Kconfig
new file mode 100644
index 000000000..bf5e59687
--- /dev/null
+++ b/kernel/drivers/net/hamradio/Kconfig
@@ -0,0 +1,193 @@
+config MKISS
+ tristate "Serial port KISS driver"
+ depends on AX25 && TTY
+ select CRC16
+ ---help---
+ KISS is a protocol used for the exchange of data between a computer
+ and a Terminal Node Controller (a small embedded system commonly
+ used for networking over AX.25 amateur radio connections; it
+ connects the computer's serial port with the radio's microphone
+ input and speaker output).
+
+ Although KISS is less advanced than the 6pack protocol, it has
+ the advantage that it is already supported by most modern TNCs
+ without the need for a firmware upgrade.
+
+ To compile this driver as a module, choose M here: the module
+ will be called mkiss.
+
+config 6PACK
+ tristate "Serial port 6PACK driver"
+ depends on AX25 && TTY
+ ---help---
+ 6pack is a transmission protocol for the data exchange between your
+ PC and your TNC (the Terminal Node Controller acts as a kind of
+ modem connecting your computer's serial port to your radio's
+ microphone input and speaker output). This protocol can be used as
+ an alternative to KISS for networking over AX.25 amateur radio
+ connections, but it has some extended functionality.
+
+ Note that this driver is still experimental and might cause
+ problems. For details about the features and the usage of the
+ driver, read <file:Documentation/networking/6pack.txt>.
+
+ To compile this driver as a module, choose M here: the module
+ will be called 6pack.
+
+config BPQETHER
+ tristate "BPQ Ethernet driver"
+ depends on AX25
+ help
+ AX.25 is the protocol used for computer communication over amateur
+ radio. If you say Y here, you will be able to send and receive AX.25
+ traffic over Ethernet (also called "BPQ AX.25"), which could be
+ useful if some other computer on your local network has a direct
+ amateur radio connection.
+
+config DMASCC
+ tristate "High-speed (DMA) SCC driver for AX.25"
+ depends on ISA && AX25 && BROKEN_ON_SMP && ISA_DMA_API
+ ---help---
+ This is a driver for high-speed SCC boards, i.e. those supporting
+ DMA on one port. You usually use those boards to connect your
+ computer to an amateur radio modem (such as the WA4DSY 56kbps
+ modem), in order to send and receive AX.25 packet radio network
+ traffic.
+
+ Currently, this driver supports Ottawa PI/PI2, Paccomm/Gracilis
+ PackeTwin, and S5SCC/DMA boards. They are detected automatically.
+ If you have one of these cards, say Y here and read the AX25-HOWTO,
+ available from <http://www.tldp.org/docs.html#howto>.
+
+ This driver can operate multiple boards simultaneously. If you
+ compile it as a module (by saying M instead of Y), it will be called
+ dmascc. If you don't pass any parameter to the driver, all
+ possible I/O addresses are probed. This could irritate other devices
+ that are currently not in use. You may specify the list of addresses
+ to be probed by "dmascc.io=addr1,addr2,..." (when compiled into the
+ kernel image) or "io=addr1,addr2,..." (when loaded as a module). The
+ network interfaces will be called dmascc0 and dmascc1 for the board
+ detected first, dmascc2 and dmascc3 for the second one, and so on.
+
+ Before you configure each interface with ifconfig, you MUST set
+ certain parameters, such as channel access timing, clock mode, and
+ DMA channel. This is accomplished with a small utility program,
+ dmascc_cfg, available at
+ <http://www.linux-ax25.org/wiki/Ax25-tools>. Please be sure to
+ get at least version 1.27 of dmascc_cfg, as older versions will not
+ work with the current driver.
+
+config SCC
+ tristate "Z8530 SCC driver"
+ depends on ISA && AX25 && ISA_DMA_API
+ ---help---
+ These cards are used to connect your Linux box to an amateur radio
+ in order to communicate with other computers. If you want to use
+ this, read <file:Documentation/networking/z8530drv.txt> and the
+ AX25-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>. Also make sure to say Y
+ to "Amateur Radio AX.25 Level 2" support.
+
+ To compile this driver as a module, choose M here: the module
+ will be called scc.
+
+config SCC_DELAY
+ bool "additional delay for PA0HZP OptoSCC compatible boards"
+ depends on SCC
+ help
+ Say Y here if you experience problems with the SCC driver not
+ working properly; please read
+ <file:Documentation/networking/z8530drv.txt> for details.
+
+ If unsure, say N.
+
+config SCC_TRXECHO
+ bool "support for TRX that feedback the tx signal to rx"
+ depends on SCC
+ help
+ Some transmitters feed the transmitted signal back to the receive
+ line. Say Y here to foil this by explicitly disabling the receiver
+ during data transmission.
+
+ If in doubt, say Y.
+
+config BAYCOM_SER_FDX
+ tristate "BAYCOM ser12 fullduplex driver for AX.25"
+ depends on AX25 && !S390
+ select CRC_CCITT
+ ---help---
+ This is one of two drivers for Baycom style simple amateur radio
+ modems that connect to a serial interface. The driver supports the
+ ser12 design in full-duplex mode. In addition, it allows the
+ baudrate to be set between 300 and 4800 baud (however not all modems
+ support all baudrates). This is the preferred driver. The next
+ driver, "BAYCOM ser12 half-duplex driver for AX.25" is the old
+ driver and still provided in case this driver does not work with
+ your serial interface chip. To configure the driver, use the sethdlc
+ utility available in the standard ax25 utilities package. For
+ information on the modems, see <http://www.baycom.de/> and
+ <file:Documentation/networking/baycom.txt>.
+
+ To compile this driver as a module, choose M here: the module
+ will be called baycom_ser_fdx. This is recommended.
+
+config BAYCOM_SER_HDX
+ tristate "BAYCOM ser12 halfduplex driver for AX.25"
+ depends on AX25 && !S390
+ select CRC_CCITT
+ ---help---
+ This is one of two drivers for Baycom style simple amateur radio
+ modems that connect to a serial interface. The driver supports the
+ ser12 design in half-duplex mode. This is the old driver. It is
+ still provided in case your serial interface chip does not work with
+ the full-duplex driver. This driver is deprecated. To configure
+ the driver, use the sethdlc utility available in the standard ax25
+ utilities package. For information on the modems, see
+ <http://www.baycom.de/> and
+ <file:Documentation/networking/baycom.txt>.
+
+ To compile this driver as a module, choose M here: the module
+ will be called baycom_ser_hdx. This is recommended.
+
+config BAYCOM_PAR
+ tristate "BAYCOM picpar and par96 driver for AX.25"
+ depends on PARPORT && AX25
+ select CRC_CCITT
+ ---help---
+ This is a driver for Baycom style simple amateur radio modems that
+ connect to a parallel interface. The driver supports the picpar and
+ par96 designs. To configure the driver, use the sethdlc utility
+ available in the standard ax25 utilities package. For information on
+ the modems, see <http://www.baycom.de/> and the file
+ <file:Documentation/networking/baycom.txt>.
+
+ To compile this driver as a module, choose M here: the module
+ will be called baycom_par. This is recommended.
+
+config BAYCOM_EPP
+ tristate "BAYCOM epp driver for AX.25"
+ depends on PARPORT && AX25 && !64BIT
+ select CRC_CCITT
+ ---help---
+ This is a driver for Baycom style simple amateur radio modems that
+ connect to a parallel interface. The driver supports the EPP
+ designs. To configure the driver, use the sethdlc utility available
+ in the standard ax25 utilities package. For information on the
+ modems, see <http://www.baycom.de/> and the file
+ <file:Documentation/networking/baycom.txt>.
+
+ To compile this driver as a module, choose M here: the module
+ will be called baycom_epp. This is recommended.
+
+config YAM
+ tristate "YAM driver for AX.25"
+ depends on AX25 && !S390
+ help
+ The YAM is a modem for packet radio which connects to the serial
+ port and includes some of the functions of a Terminal Node
+ Controller. If you have one of those, say Y here.
+
+ To compile this driver as a module, choose M here: the module
+ will be called yam.
+
+