Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

1 files changed, 76 insertions, 0 deletions

diff --git a/kernel/drivers/net/fddi/skfp/h/sba_def.h b/kernel/drivers/net/fddi/skfp/h/sba_def.h
new file mode 100644
index 000000000..0459a095d
--- /dev/null
+++ b/kernel/drivers/net/fddi/skfp/h/sba_def.h
@@ -0,0 +1,76 @@
+/******************************************************************************
+ *
+ *	(C)Copyright 1998,1999 SysKonnect,
+ *	a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+#define PHYS			0		/* physical addr */
+#define PERM_ADDR		0x80		/* permanet address */
+#define SB_STATIC		0x00000001
+#define MAX_PAYLOAD		1562
+#define PRIMARY_RING		0x00000001
+#ifndef NULL
+#define NULL			0x00
+#endif
+
+/*********************** SB_Input Variable Values ***********************/
+/*	 may be needed when ever the SBA state machine is called	*/
+
+#define UNKNOWN_SYNC_SOURCE	0x0001
+#define REQ_ALLOCATION		0x0002
+#define REPORT_RESP		0x0003
+#define CHANGE_RESP		0x0004
+#define TNEG			0x0005
+#define NIF			0x0006
+#define SB_STOP			0x0007
+#define SB_START		0x0008
+#define REPORT_TIMER		0x0009
+#define CHANGE_REQUIRED		0x000A
+
+#define DEFAULT_OV		50
+
+#ifdef SBA
+/**************************** SBA STATES *****************************/
+
+#define SBA_STANDBY		0x00000000
+#define SBA_ACTIVE		0x00000001
+#define SBA_RECOVERY		0x00000002
+#define SBA_REPORT		0x00000003
+#define SBA_CHANGE		0x00000004
+
+/**************************** OTHERS *********************************/
+
+#define FIFTY_PERCENT		50		/* bytes per second */
+#define MAX_SESSIONS		150	
+#define TWO_MINUTES		13079		/* 9.175 ms/tick */
+#define FIFTY_BYTES		50
+#define SBA_DENIED		0x0000000D
+#define I_NEED_ONE		0x00000000
+#define MAX_NODES		50
+/*#define T_REPORT		0x59682F00L*/	/* 120s/80ns in Hex */
+#define	TWO_MIN			120		/* seconds */
+#define SBA_ST_UNKNOWN		0x00000002
+#define SBA_ST_ACTIVE		0x00000001
+#define S_CLEAR			0x00000000L
+#define ZERO			0x00000000
+#define FULL			0x00000000	/* old: 0xFFFFFFFFF */
+#define S_SET			0x00000001L
+#define LOW_PRIO		0x02		/* ??????? */
+#define OK			0x01		/* ??????? */
+#define NOT_OK			0x00		/* ??????? */
+
+/****************************************/
+/* deallocate_status[ni][si] values	*/
+/****************************************/
+#define TX_CHANGE		0X00000001L
+#define PENDING			0x00000002L
+#define NONE			0X00000000L
+#endif