diff options
author | 2015-08-04 12:17:53 -0700 | |
---|---|---|
committer | 2015-08-04 15:44:42 -0700 | |
commit | 9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 (patch) | |
tree | 1c9cafbcd35f783a87880a10f85d1a060db1a563 /kernel/drivers/net/ethernet/xircom/xirc2ps_cs.c | |
parent | 98260f3884f4a202f9ca5eabed40b1354c489b29 (diff) |
Add the rt linux 4.1.3-rt3 as base
Import the rt linux 4.1.3-rt3 as OPNFV kvm base.
It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:
commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Sat Jul 25 12:13:34 2015 +0200
Prepare v4.1.3-rt3
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.
Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>
Diffstat (limited to 'kernel/drivers/net/ethernet/xircom/xirc2ps_cs.c')
-rw-r--r-- | kernel/drivers/net/ethernet/xircom/xirc2ps_cs.c | 1798 |
1 files changed, 1798 insertions, 0 deletions
diff --git a/kernel/drivers/net/ethernet/xircom/xirc2ps_cs.c b/kernel/drivers/net/ethernet/xircom/xirc2ps_cs.c new file mode 100644 index 000000000..d56f86932 --- /dev/null +++ b/kernel/drivers/net/ethernet/xircom/xirc2ps_cs.c @@ -0,0 +1,1798 @@ +/* [xirc2ps_cs.c wk 03.11.99] (1.40 1999/11/18 00:06:03) + * Xircom CreditCard Ethernet Adapter IIps driver + * Xircom Realport 10/100 (RE-100) driver + * + * This driver supports various Xircom CreditCard Ethernet adapters + * including the CE2, CE IIps, RE-10, CEM28, CEM33, CE33, CEM56, + * CE3-100, CE3B, RE-100, REM10BT, and REM56G-100. + * + * 2000-09-24 <psheer@icon.co.za> The Xircom CE3B-100 may not + * autodetect the media properly. In this case use the + * if_port=1 (for 10BaseT) or if_port=4 (for 100BaseT) options + * to force the media type. + * + * Written originally by Werner Koch based on David Hinds' skeleton of the + * PCMCIA driver. + * + * Copyright (c) 1997,1998 Werner Koch (dd9jn) + * + * This driver is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * It is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + * + * + * ALTERNATIVELY, this driver may be distributed under the terms of + * the following license, in which case the provisions of this license + * are required INSTEAD OF the GNU General Public License. (This clause + * is necessary due to a potential bad interaction between the GPL and + * the restrictions contained in a BSD-style copyright.) + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, and the entire permission notice in its entirety, + * including the disclaimer of warranties. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote + * products derived from this software without specific prior + * written permission. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED + * OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/ptrace.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/timer.h> +#include <linux/interrupt.h> +#include <linux/in.h> +#include <linux/delay.h> +#include <linux/ethtool.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/if_arp.h> +#include <linux/ioport.h> +#include <linux/bitops.h> +#include <linux/mii.h> + +#include <pcmcia/cistpl.h> +#include <pcmcia/cisreg.h> +#include <pcmcia/ciscode.h> + +#include <asm/io.h> +#include <asm/uaccess.h> + +#ifndef MANFID_COMPAQ + #define MANFID_COMPAQ 0x0138 + #define MANFID_COMPAQ2 0x0183 /* is this correct? */ +#endif + +#include <pcmcia/ds.h> + +/* Time in jiffies before concluding Tx hung */ +#define TX_TIMEOUT ((400*HZ)/1000) + +/**************** + * Some constants used to access the hardware + */ + +/* Register offsets and value constans */ +#define XIRCREG_CR 0 /* Command register (wr) */ +enum xirc_cr { + TransmitPacket = 0x01, + SoftReset = 0x02, + EnableIntr = 0x04, + ForceIntr = 0x08, + ClearTxFIFO = 0x10, + ClearRxOvrun = 0x20, + RestartTx = 0x40 +}; +#define XIRCREG_ESR 0 /* Ethernet status register (rd) */ +enum xirc_esr { + FullPktRcvd = 0x01, /* full packet in receive buffer */ + PktRejected = 0x04, /* a packet has been rejected */ + TxPktPend = 0x08, /* TX Packet Pending */ + IncorPolarity = 0x10, + MediaSelect = 0x20 /* set if TP, clear if AUI */ +}; +#define XIRCREG_PR 1 /* Page Register select */ +#define XIRCREG_EDP 4 /* Ethernet Data Port Register */ +#define XIRCREG_ISR 6 /* Ethernet Interrupt Status Register */ +enum xirc_isr { + TxBufOvr = 0x01, /* TX Buffer Overflow */ + PktTxed = 0x02, /* Packet Transmitted */ + MACIntr = 0x04, /* MAC Interrupt occurred */ + TxResGrant = 0x08, /* Tx Reservation Granted */ + RxFullPkt = 0x20, /* Rx Full Packet */ + RxPktRej = 0x40, /* Rx Packet Rejected */ + ForcedIntr= 0x80 /* Forced Interrupt */ +}; +#define XIRCREG1_IMR0 12 /* Ethernet Interrupt Mask Register (on page 1)*/ +#define XIRCREG1_IMR1 13 +#define XIRCREG0_TSO 8 /* Transmit Space Open Register (on page 0)*/ +#define XIRCREG0_TRS 10 /* Transmit reservation Size Register (page 0)*/ +#define XIRCREG0_DO 12 /* Data Offset Register (page 0) (wr) */ +#define XIRCREG0_RSR 12 /* Receive Status Register (page 0) (rd) */ +enum xirc_rsr { + PhyPkt = 0x01, /* set:physical packet, clear: multicast packet */ + BrdcstPkt = 0x02, /* set if it is a broadcast packet */ + PktTooLong = 0x04, /* set if packet length > 1518 */ + AlignErr = 0x10, /* incorrect CRC and last octet not complete */ + CRCErr = 0x20, /* incorrect CRC and last octet is complete */ + PktRxOk = 0x80 /* received ok */ +}; +#define XIRCREG0_PTR 13 /* packets transmitted register (rd) */ +#define XIRCREG0_RBC 14 /* receive byte count regsister (rd) */ +#define XIRCREG1_ECR 14 /* ethernet configurationn register */ +enum xirc_ecr { + FullDuplex = 0x04, /* enable full duplex mode */ + LongTPMode = 0x08, /* adjust for longer lengths of TP cable */ + DisablePolCor = 0x10,/* disable auto polarity correction */ + DisableLinkPulse = 0x20, /* disable link pulse generation */ + DisableAutoTx = 0x40, /* disable auto-transmit */ +}; +#define XIRCREG2_RBS 8 /* receive buffer start register */ +#define XIRCREG2_LED 10 /* LED Configuration register */ +/* values for the leds: Bits 2-0 for led 1 + * 0 disabled Bits 5-3 for led 2 + * 1 collision + * 2 noncollision + * 3 link_detected + * 4 incor_polarity + * 5 jabber + * 6 auto_assertion + * 7 rx_tx_activity + */ +#define XIRCREG2_MSR 12 /* Mohawk specific register */ + +#define XIRCREG4_GPR0 8 /* General Purpose Register 0 */ +#define XIRCREG4_GPR1 9 /* General Purpose Register 1 */ +#define XIRCREG2_GPR2 13 /* General Purpose Register 2 (page2!)*/ +#define XIRCREG4_BOV 10 /* Bonding Version Register */ +#define XIRCREG4_LMA 12 /* Local Memory Address Register */ +#define XIRCREG4_LMD 14 /* Local Memory Data Port */ +/* MAC register can only by accessed with 8 bit operations */ +#define XIRCREG40_CMD0 8 /* Command Register (wr) */ +enum xirc_cmd { /* Commands */ + Transmit = 0x01, + EnableRecv = 0x04, + DisableRecv = 0x08, + Abort = 0x10, + Online = 0x20, + IntrAck = 0x40, + Offline = 0x80 +}; +#define XIRCREG5_RHSA0 10 /* Rx Host Start Address */ +#define XIRCREG40_RXST0 9 /* Receive Status Register */ +#define XIRCREG40_TXST0 11 /* Transmit Status Register 0 */ +#define XIRCREG40_TXST1 12 /* Transmit Status Register 10 */ +#define XIRCREG40_RMASK0 13 /* Receive Mask Register */ +#define XIRCREG40_TMASK0 14 /* Transmit Mask Register 0 */ +#define XIRCREG40_TMASK1 15 /* Transmit Mask Register 0 */ +#define XIRCREG42_SWC0 8 /* Software Configuration 0 */ +#define XIRCREG42_SWC1 9 /* Software Configuration 1 */ +#define XIRCREG42_BOC 10 /* Back-Off Configuration */ +#define XIRCREG44_TDR0 8 /* Time Domain Reflectometry 0 */ +#define XIRCREG44_TDR1 9 /* Time Domain Reflectometry 1 */ +#define XIRCREG44_RXBC_LO 10 /* Rx Byte Count 0 (rd) */ +#define XIRCREG44_RXBC_HI 11 /* Rx Byte Count 1 (rd) */ +#define XIRCREG45_REV 15 /* Revision Register (rd) */ +#define XIRCREG50_IA 8 /* Individual Address (8-13) */ + +static const char *if_names[] = { "Auto", "10BaseT", "10Base2", "AUI", "100BaseT" }; + +/* card types */ +#define XIR_UNKNOWN 0 /* unknown: not supported */ +#define XIR_CE 1 /* (prodid 1) different hardware: not supported */ +#define XIR_CE2 2 /* (prodid 2) */ +#define XIR_CE3 3 /* (prodid 3) */ +#define XIR_CEM 4 /* (prodid 1) different hardware: not supported */ +#define XIR_CEM2 5 /* (prodid 2) */ +#define XIR_CEM3 6 /* (prodid 3) */ +#define XIR_CEM33 7 /* (prodid 4) */ +#define XIR_CEM56M 8 /* (prodid 5) */ +#define XIR_CEM56 9 /* (prodid 6) */ +#define XIR_CM28 10 /* (prodid 3) modem only: not supported here */ +#define XIR_CM33 11 /* (prodid 4) modem only: not supported here */ +#define XIR_CM56 12 /* (prodid 5) modem only: not supported here */ +#define XIR_CG 13 /* (prodid 1) GSM modem only: not supported */ +#define XIR_CBE 14 /* (prodid 1) cardbus ethernet: not supported */ +/*====================================================================*/ + +/* Module parameters */ + +MODULE_DESCRIPTION("Xircom PCMCIA ethernet driver"); +MODULE_LICENSE("Dual MPL/GPL"); + +#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0) + +INT_MODULE_PARM(if_port, 0); +INT_MODULE_PARM(full_duplex, 0); +INT_MODULE_PARM(do_sound, 1); +INT_MODULE_PARM(lockup_hack, 0); /* anti lockup hack */ + +/*====================================================================*/ + +/* We do not process more than these number of bytes during one + * interrupt. (Of course we receive complete packets, so this is not + * an exact value). + * Something between 2000..22000; first value gives best interrupt latency, + * the second enables the usage of the complete on-chip buffer. We use the + * high value as the initial value. + */ +static unsigned maxrx_bytes = 22000; + +/* MII management prototypes */ +static void mii_idle(unsigned int ioaddr); +static void mii_putbit(unsigned int ioaddr, unsigned data); +static int mii_getbit(unsigned int ioaddr); +static void mii_wbits(unsigned int ioaddr, unsigned data, int len); +static unsigned mii_rd(unsigned int ioaddr, u_char phyaddr, u_char phyreg); +static void mii_wr(unsigned int ioaddr, u_char phyaddr, u_char phyreg, + unsigned data, int len); + +static int has_ce2_string(struct pcmcia_device * link); +static int xirc2ps_config(struct pcmcia_device * link); +static void xirc2ps_release(struct pcmcia_device * link); +static void xirc2ps_detach(struct pcmcia_device *p_dev); + +static irqreturn_t xirc2ps_interrupt(int irq, void *dev_id); + +struct local_info { + struct net_device *dev; + struct pcmcia_device *p_dev; + + int card_type; + int probe_port; + int silicon; /* silicon revision. 0=old CE2, 1=Scipper, 4=Mohawk */ + int mohawk; /* a CE3 type card */ + int dingo; /* a CEM56 type card */ + int new_mii; /* has full 10baseT/100baseT MII */ + int modem; /* is a multi function card (i.e with a modem) */ + void __iomem *dingo_ccr; /* only used for CEM56 cards */ + unsigned last_ptr_value; /* last packets transmitted value */ + const char *manf_str; + struct work_struct tx_timeout_task; +}; + +/**************** + * Some more prototypes + */ +static netdev_tx_t do_start_xmit(struct sk_buff *skb, + struct net_device *dev); +static void xirc_tx_timeout(struct net_device *dev); +static void xirc2ps_tx_timeout_task(struct work_struct *work); +static void set_addresses(struct net_device *dev); +static void set_multicast_list(struct net_device *dev); +static int set_card_type(struct pcmcia_device *link); +static int do_config(struct net_device *dev, struct ifmap *map); +static int do_open(struct net_device *dev); +static int do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); +static const struct ethtool_ops netdev_ethtool_ops; +static void hardreset(struct net_device *dev); +static void do_reset(struct net_device *dev, int full); +static int init_mii(struct net_device *dev); +static void do_powerdown(struct net_device *dev); +static int do_stop(struct net_device *dev); + +/*=============== Helper functions =========================*/ +#define SelectPage(pgnr) outb((pgnr), ioaddr + XIRCREG_PR) +#define GetByte(reg) ((unsigned)inb(ioaddr + (reg))) +#define GetWord(reg) ((unsigned)inw(ioaddr + (reg))) +#define PutByte(reg,value) outb((value), ioaddr+(reg)) +#define PutWord(reg,value) outw((value), ioaddr+(reg)) + +/*====== Functions used for debugging =================================*/ +#if 0 /* reading regs may change system status */ +static void +PrintRegisters(struct net_device *dev) +{ + unsigned int ioaddr = dev->base_addr; + + if (pc_debug > 1) { + int i, page; + + printk(KERN_DEBUG pr_fmt("Register common: ")); + for (i = 0; i < 8; i++) + pr_cont(" %2.2x", GetByte(i)); + pr_cont("\n"); + for (page = 0; page <= 8; page++) { + printk(KERN_DEBUG pr_fmt("Register page %2x: "), page); + SelectPage(page); + for (i = 8; i < 16; i++) + pr_cont(" %2.2x", GetByte(i)); + pr_cont("\n"); + } + for (page=0x40 ; page <= 0x5f; page++) { + if (page == 0x43 || (page >= 0x46 && page <= 0x4f) || + (page >= 0x51 && page <=0x5e)) + continue; + printk(KERN_DEBUG pr_fmt("Register page %2x: "), page); + SelectPage(page); + for (i = 8; i < 16; i++) + pr_cont(" %2.2x", GetByte(i)); + pr_cont("\n"); + } + } +} +#endif /* 0 */ + +/*============== MII Management functions ===============*/ + +/**************** + * Turn around for read + */ +static void +mii_idle(unsigned int ioaddr) +{ + PutByte(XIRCREG2_GPR2, 0x04|0); /* drive MDCK low */ + udelay(1); + PutByte(XIRCREG2_GPR2, 0x04|1); /* and drive MDCK high */ + udelay(1); +} + +/**************** + * Write a bit to MDI/O + */ +static void +mii_putbit(unsigned int ioaddr, unsigned data) +{ + #if 1 + if (data) { + PutByte(XIRCREG2_GPR2, 0x0c|2|0); /* set MDIO */ + udelay(1); + PutByte(XIRCREG2_GPR2, 0x0c|2|1); /* and drive MDCK high */ + udelay(1); + } else { + PutByte(XIRCREG2_GPR2, 0x0c|0|0); /* clear MDIO */ + udelay(1); + PutByte(XIRCREG2_GPR2, 0x0c|0|1); /* and drive MDCK high */ + udelay(1); + } + #else + if (data) { + PutWord(XIRCREG2_GPR2-1, 0x0e0e); + udelay(1); + PutWord(XIRCREG2_GPR2-1, 0x0f0f); + udelay(1); + } else { + PutWord(XIRCREG2_GPR2-1, 0x0c0c); + udelay(1); + PutWord(XIRCREG2_GPR2-1, 0x0d0d); + udelay(1); + } + #endif +} + +/**************** + * Get a bit from MDI/O + */ +static int +mii_getbit(unsigned int ioaddr) +{ + unsigned d; + + PutByte(XIRCREG2_GPR2, 4|0); /* drive MDCK low */ + udelay(1); + d = GetByte(XIRCREG2_GPR2); /* read MDIO */ + PutByte(XIRCREG2_GPR2, 4|1); /* drive MDCK high again */ + udelay(1); + return d & 0x20; /* read MDIO */ +} + +static void +mii_wbits(unsigned int ioaddr, unsigned data, int len) +{ + unsigned m = 1 << (len-1); + for (; m; m >>= 1) + mii_putbit(ioaddr, data & m); +} + +static unsigned +mii_rd(unsigned int ioaddr, u_char phyaddr, u_char phyreg) +{ + int i; + unsigned data=0, m; + + SelectPage(2); + for (i=0; i < 32; i++) /* 32 bit preamble */ + mii_putbit(ioaddr, 1); + mii_wbits(ioaddr, 0x06, 4); /* Start and opcode for read */ + mii_wbits(ioaddr, phyaddr, 5); /* PHY address to be accessed */ + mii_wbits(ioaddr, phyreg, 5); /* PHY register to read */ + mii_idle(ioaddr); /* turn around */ + mii_getbit(ioaddr); + + for (m = 1<<15; m; m >>= 1) + if (mii_getbit(ioaddr)) + data |= m; + mii_idle(ioaddr); + return data; +} + +static void +mii_wr(unsigned int ioaddr, u_char phyaddr, u_char phyreg, unsigned data, + int len) +{ + int i; + + SelectPage(2); + for (i=0; i < 32; i++) /* 32 bit preamble */ + mii_putbit(ioaddr, 1); + mii_wbits(ioaddr, 0x05, 4); /* Start and opcode for write */ + mii_wbits(ioaddr, phyaddr, 5); /* PHY address to be accessed */ + mii_wbits(ioaddr, phyreg, 5); /* PHY Register to write */ + mii_putbit(ioaddr, 1); /* turn around */ + mii_putbit(ioaddr, 0); + mii_wbits(ioaddr, data, len); /* And write the data */ + mii_idle(ioaddr); +} + +/*============= Main bulk of functions =========================*/ + +static const struct net_device_ops netdev_ops = { + .ndo_open = do_open, + .ndo_stop = do_stop, + .ndo_start_xmit = do_start_xmit, + .ndo_tx_timeout = xirc_tx_timeout, + .ndo_set_config = do_config, + .ndo_do_ioctl = do_ioctl, + .ndo_set_rx_mode = set_multicast_list, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, +}; + +static int +xirc2ps_probe(struct pcmcia_device *link) +{ + struct net_device *dev; + struct local_info *local; + + dev_dbg(&link->dev, "attach()\n"); + + /* Allocate the device structure */ + dev = alloc_etherdev(sizeof(struct local_info)); + if (!dev) + return -ENOMEM; + local = netdev_priv(dev); + local->dev = dev; + local->p_dev = link; + link->priv = dev; + + /* General socket configuration */ + link->config_index = 1; + + /* Fill in card specific entries */ + dev->netdev_ops = &netdev_ops; + dev->ethtool_ops = &netdev_ethtool_ops; + dev->watchdog_timeo = TX_TIMEOUT; + INIT_WORK(&local->tx_timeout_task, xirc2ps_tx_timeout_task); + + return xirc2ps_config(link); +} /* xirc2ps_attach */ + +static void +xirc2ps_detach(struct pcmcia_device *link) +{ + struct net_device *dev = link->priv; + + dev_dbg(&link->dev, "detach\n"); + + unregister_netdev(dev); + + xirc2ps_release(link); + + free_netdev(dev); +} /* xirc2ps_detach */ + +/**************** + * Detect the type of the card. s is the buffer with the data of tuple 0x20 + * Returns: 0 := not supported + * mediaid=11 and prodid=47 + * Media-Id bits: + * Ethernet 0x01 + * Tokenring 0x02 + * Arcnet 0x04 + * Wireless 0x08 + * Modem 0x10 + * GSM only 0x20 + * Prod-Id bits: + * Pocket 0x10 + * External 0x20 + * Creditcard 0x40 + * Cardbus 0x80 + * + */ +static int +set_card_type(struct pcmcia_device *link) +{ + struct net_device *dev = link->priv; + struct local_info *local = netdev_priv(dev); + u8 *buf; + unsigned int cisrev, mediaid, prodid; + size_t len; + + len = pcmcia_get_tuple(link, CISTPL_MANFID, &buf); + if (len < 5) { + dev_err(&link->dev, "invalid CIS -- sorry\n"); + return 0; + } + + cisrev = buf[2]; + mediaid = buf[3]; + prodid = buf[4]; + + dev_dbg(&link->dev, "cisrev=%02x mediaid=%02x prodid=%02x\n", + cisrev, mediaid, prodid); + + local->mohawk = 0; + local->dingo = 0; + local->modem = 0; + local->card_type = XIR_UNKNOWN; + if (!(prodid & 0x40)) { + pr_notice("Oops: Not a creditcard\n"); + return 0; + } + if (!(mediaid & 0x01)) { + pr_notice("Not an Ethernet card\n"); + return 0; + } + if (mediaid & 0x10) { + local->modem = 1; + switch(prodid & 15) { + case 1: local->card_type = XIR_CEM ; break; + case 2: local->card_type = XIR_CEM2 ; break; + case 3: local->card_type = XIR_CEM3 ; break; + case 4: local->card_type = XIR_CEM33 ; break; + case 5: local->card_type = XIR_CEM56M; + local->mohawk = 1; + break; + case 6: + case 7: /* 7 is the RealPort 10/56 */ + local->card_type = XIR_CEM56 ; + local->mohawk = 1; + local->dingo = 1; + break; + } + } else { + switch(prodid & 15) { + case 1: local->card_type = has_ce2_string(link)? XIR_CE2 : XIR_CE ; + break; + case 2: local->card_type = XIR_CE2; break; + case 3: local->card_type = XIR_CE3; + local->mohawk = 1; + break; + } + } + if (local->card_type == XIR_CE || local->card_type == XIR_CEM) { + pr_notice("Sorry, this is an old CE card\n"); + return 0; + } + if (local->card_type == XIR_UNKNOWN) + pr_notice("unknown card (mediaid=%02x prodid=%02x)\n", mediaid, prodid); + + return 1; +} + +/**************** + * There are some CE2 cards out which claim to be a CE card. + * This function looks for a "CE2" in the 3rd version field. + * Returns: true if this is a CE2 + */ +static int +has_ce2_string(struct pcmcia_device * p_dev) +{ + if (p_dev->prod_id[2] && strstr(p_dev->prod_id[2], "CE2")) + return 1; + return 0; +} + +static int +xirc2ps_config_modem(struct pcmcia_device *p_dev, void *priv_data) +{ + unsigned int ioaddr; + + if ((p_dev->resource[0]->start & 0xf) == 8) + return -ENODEV; + + p_dev->resource[0]->end = 16; + p_dev->resource[1]->end = 8; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; + p_dev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->io_lines = 10; + + p_dev->resource[1]->start = p_dev->resource[0]->start; + for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) { + p_dev->resource[0]->start = ioaddr; + if (!pcmcia_request_io(p_dev)) + return 0; + } + return -ENODEV; +} + +static int +xirc2ps_config_check(struct pcmcia_device *p_dev, void *priv_data) +{ + int *pass = priv_data; + resource_size_t tmp = p_dev->resource[1]->start; + + tmp += (*pass ? (p_dev->config_index & 0x20 ? -24 : 8) + : (p_dev->config_index & 0x20 ? 8 : -24)); + + if ((p_dev->resource[0]->start & 0xf) == 8) + return -ENODEV; + + p_dev->resource[0]->end = 18; + p_dev->resource[1]->end = 8; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; + p_dev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->io_lines = 10; + + p_dev->resource[1]->start = p_dev->resource[0]->start; + p_dev->resource[0]->start = tmp; + return pcmcia_request_io(p_dev); +} + + +static int pcmcia_get_mac_ce(struct pcmcia_device *p_dev, + tuple_t *tuple, + void *priv) +{ + struct net_device *dev = priv; + int i; + + if (tuple->TupleDataLen != 13) + return -EINVAL; + if ((tuple->TupleData[0] != 2) || (tuple->TupleData[1] != 1) || + (tuple->TupleData[2] != 6)) + return -EINVAL; + /* another try (James Lehmer's CE2 version 4.1)*/ + for (i = 2; i < 6; i++) + dev->dev_addr[i] = tuple->TupleData[i+2]; + return 0; +}; + + +static int +xirc2ps_config(struct pcmcia_device * link) +{ + struct net_device *dev = link->priv; + struct local_info *local = netdev_priv(dev); + unsigned int ioaddr; + int err; + u8 *buf; + size_t len; + + local->dingo_ccr = NULL; + + dev_dbg(&link->dev, "config\n"); + + /* Is this a valid card */ + if (link->has_manf_id == 0) { + pr_notice("manfid not found in CIS\n"); + goto failure; + } + + switch (link->manf_id) { + case MANFID_XIRCOM: + local->manf_str = "Xircom"; + break; + case MANFID_ACCTON: + local->manf_str = "Accton"; + break; + case MANFID_COMPAQ: + case MANFID_COMPAQ2: + local->manf_str = "Compaq"; + break; + case MANFID_INTEL: + local->manf_str = "Intel"; + break; + case MANFID_TOSHIBA: + local->manf_str = "Toshiba"; + break; + default: + pr_notice("Unknown Card Manufacturer ID: 0x%04x\n", + (unsigned)link->manf_id); + goto failure; + } + dev_dbg(&link->dev, "found %s card\n", local->manf_str); + + if (!set_card_type(link)) { + pr_notice("this card is not supported\n"); + goto failure; + } + + /* get the ethernet address from the CIS */ + err = pcmcia_get_mac_from_cis(link, dev); + + /* not found: try to get the node-id from tuple 0x89 */ + if (err) { + len = pcmcia_get_tuple(link, 0x89, &buf); + /* data layout looks like tuple 0x22 */ + if (buf && len == 8) { + if (*buf == CISTPL_FUNCE_LAN_NODE_ID) { + int i; + for (i = 2; i < 6; i++) + dev->dev_addr[i] = buf[i+2]; + } else + err = -1; + } + kfree(buf); + } + + if (err) + err = pcmcia_loop_tuple(link, CISTPL_FUNCE, pcmcia_get_mac_ce, dev); + + if (err) { + pr_notice("node-id not found in CIS\n"); + goto failure; + } + + if (local->modem) { + int pass; + link->config_flags |= CONF_AUTO_SET_IO; + + if (local->dingo) { + /* Take the Modem IO port from the CIS and scan for a free + * Ethernet port */ + if (!pcmcia_loop_config(link, xirc2ps_config_modem, NULL)) + goto port_found; + } else { + /* We do 2 passes here: The first one uses the regular mapping and + * the second tries again, thereby considering that the 32 ports are + * mirrored every 32 bytes. Actually we use a mirrored port for + * the Mako if (on the first pass) the COR bit 5 is set. + */ + for (pass=0; pass < 2; pass++) + if (!pcmcia_loop_config(link, xirc2ps_config_check, + &pass)) + goto port_found; + /* if special option: + * try to configure as Ethernet only. + * .... */ + } + pr_notice("no ports available\n"); + } else { + link->io_lines = 10; + link->resource[0]->end = 16; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; + for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) { + link->resource[0]->start = ioaddr; + if (!(err = pcmcia_request_io(link))) + goto port_found; + } + link->resource[0]->start = 0; /* let CS decide */ + if ((err = pcmcia_request_io(link))) + goto config_error; + } + port_found: + if (err) + goto config_error; + + /**************** + * Now allocate an interrupt line. Note that this does not + * actually assign a handler to the interrupt. + */ + if ((err=pcmcia_request_irq(link, xirc2ps_interrupt))) + goto config_error; + + link->config_flags |= CONF_ENABLE_IRQ; + if (do_sound) + link->config_flags |= CONF_ENABLE_SPKR; + + if ((err = pcmcia_enable_device(link))) + goto config_error; + + if (local->dingo) { + /* Reset the modem's BAR to the correct value + * This is necessary because in the RequestConfiguration call, + * the base address of the ethernet port (BasePort1) is written + * to the BAR registers of the modem. + */ + err = pcmcia_write_config_byte(link, CISREG_IOBASE_0, (u8) + link->resource[1]->start & 0xff); + if (err) + goto config_error; + + err = pcmcia_write_config_byte(link, CISREG_IOBASE_1, + (link->resource[1]->start >> 8) & 0xff); + if (err) + goto config_error; + + /* There is no config entry for the Ethernet part which + * is at 0x0800. So we allocate a window into the attribute + * memory and write direct to the CIS registers + */ + link->resource[2]->flags = WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_AM | + WIN_ENABLE; + link->resource[2]->start = link->resource[2]->end = 0; + if ((err = pcmcia_request_window(link, link->resource[2], 0))) + goto config_error; + + local->dingo_ccr = ioremap(link->resource[2]->start, 0x1000) + 0x0800; + if ((err = pcmcia_map_mem_page(link, link->resource[2], 0))) + goto config_error; + + /* Setup the CCRs; there are no infos in the CIS about the Ethernet + * part. + */ + writeb(0x47, local->dingo_ccr + CISREG_COR); + ioaddr = link->resource[0]->start; + writeb(ioaddr & 0xff , local->dingo_ccr + CISREG_IOBASE_0); + writeb((ioaddr >> 8)&0xff , local->dingo_ccr + CISREG_IOBASE_1); + + #if 0 + { + u_char tmp; + pr_info("ECOR:"); + for (i=0; i < 7; i++) { + tmp = readb(local->dingo_ccr + i*2); + pr_cont(" %02x", tmp); + } + pr_cont("\n"); + pr_info("DCOR:"); + for (i=0; i < 4; i++) { + tmp = readb(local->dingo_ccr + 0x20 + i*2); + pr_cont(" %02x", tmp); + } + pr_cont("\n"); + pr_info("SCOR:"); + for (i=0; i < 10; i++) { + tmp = readb(local->dingo_ccr + 0x40 + i*2); + pr_cont(" %02x", tmp); + } + pr_cont("\n"); + } + #endif + + writeb(0x01, local->dingo_ccr + 0x20); + writeb(0x0c, local->dingo_ccr + 0x22); + writeb(0x00, local->dingo_ccr + 0x24); + writeb(0x00, local->dingo_ccr + 0x26); + writeb(0x00, local->dingo_ccr + 0x28); + } + + /* The if_port symbol can be set when the module is loaded */ + local->probe_port=0; + if (!if_port) { + local->probe_port = dev->if_port = 1; + } else if ((if_port >= 1 && if_port <= 2) || + (local->mohawk && if_port==4)) + dev->if_port = if_port; + else + pr_notice("invalid if_port requested\n"); + + /* we can now register the device with the net subsystem */ + dev->irq = link->irq; + dev->base_addr = link->resource[0]->start; + + if (local->dingo) + do_reset(dev, 1); /* a kludge to make the cem56 work */ + + SET_NETDEV_DEV(dev, &link->dev); + + if ((err=register_netdev(dev))) { + pr_notice("register_netdev() failed\n"); + goto config_error; + } + + /* give some infos about the hardware */ + netdev_info(dev, "%s: port %#3lx, irq %d, hwaddr %pM\n", + local->manf_str, (u_long)dev->base_addr, (int)dev->irq, + dev->dev_addr); + + return 0; + + config_error: + xirc2ps_release(link); + return -ENODEV; + + failure: + return -ENODEV; +} /* xirc2ps_config */ + +static void +xirc2ps_release(struct pcmcia_device *link) +{ + dev_dbg(&link->dev, "release\n"); + + if (link->resource[2]->end) { + struct net_device *dev = link->priv; + struct local_info *local = netdev_priv(dev); + if (local->dingo) + iounmap(local->dingo_ccr - 0x0800); + } + pcmcia_disable_device(link); +} /* xirc2ps_release */ + +/*====================================================================*/ + + +static int xirc2ps_suspend(struct pcmcia_device *link) +{ + struct net_device *dev = link->priv; + + if (link->open) { + netif_device_detach(dev); + do_powerdown(dev); + } + + return 0; +} + +static int xirc2ps_resume(struct pcmcia_device *link) +{ + struct net_device *dev = link->priv; + + if (link->open) { + do_reset(dev,1); + netif_device_attach(dev); + } + + return 0; +} + + +/*====================================================================*/ + +/**************** + * This is the Interrupt service route. + */ +static irqreturn_t +xirc2ps_interrupt(int irq, void *dev_id) +{ + struct net_device *dev = (struct net_device *)dev_id; + struct local_info *lp = netdev_priv(dev); + unsigned int ioaddr; + u_char saved_page; + unsigned bytes_rcvd; + unsigned int_status, eth_status, rx_status, tx_status; + unsigned rsr, pktlen; + ulong start_ticks = jiffies; /* fixme: jiffies rollover every 497 days + * is this something to worry about? + * -- on a laptop? + */ + + if (!netif_device_present(dev)) + return IRQ_HANDLED; + + ioaddr = dev->base_addr; + if (lp->mohawk) { /* must disable the interrupt */ + PutByte(XIRCREG_CR, 0); + } + + pr_debug("%s: interrupt %d at %#x.\n", dev->name, irq, ioaddr); + + saved_page = GetByte(XIRCREG_PR); + /* Read the ISR to see whats the cause for the interrupt. + * This also clears the interrupt flags on CE2 cards + */ + int_status = GetByte(XIRCREG_ISR); + bytes_rcvd = 0; + loop_entry: + if (int_status == 0xff) { /* card may be ejected */ + pr_debug("%s: interrupt %d for dead card\n", dev->name, irq); + goto leave; + } + eth_status = GetByte(XIRCREG_ESR); + + SelectPage(0x40); + rx_status = GetByte(XIRCREG40_RXST0); + PutByte(XIRCREG40_RXST0, (~rx_status & 0xff)); + tx_status = GetByte(XIRCREG40_TXST0); + tx_status |= GetByte(XIRCREG40_TXST1) << 8; + PutByte(XIRCREG40_TXST0, 0); + PutByte(XIRCREG40_TXST1, 0); + + pr_debug("%s: ISR=%#2.2x ESR=%#2.2x RSR=%#2.2x TSR=%#4.4x\n", + dev->name, int_status, eth_status, rx_status, tx_status); + + /***** receive section ******/ + SelectPage(0); + while (eth_status & FullPktRcvd) { + rsr = GetByte(XIRCREG0_RSR); + if (bytes_rcvd > maxrx_bytes && (rsr & PktRxOk)) { + /* too many bytes received during this int, drop the rest of the + * packets */ + dev->stats.rx_dropped++; + pr_debug("%s: RX drop, too much done\n", dev->name); + } else if (rsr & PktRxOk) { + struct sk_buff *skb; + + pktlen = GetWord(XIRCREG0_RBC); + bytes_rcvd += pktlen; + + pr_debug("rsr=%#02x packet_length=%u\n", rsr, pktlen); + + /* 1 extra so we can use insw */ + skb = netdev_alloc_skb(dev, pktlen + 3); + if (!skb) { + dev->stats.rx_dropped++; + } else { /* okay get the packet */ + skb_reserve(skb, 2); + if (lp->silicon == 0 ) { /* work around a hardware bug */ + unsigned rhsa; /* receive start address */ + + SelectPage(5); + rhsa = GetWord(XIRCREG5_RHSA0); + SelectPage(0); + rhsa += 3; /* skip control infos */ + if (rhsa >= 0x8000) + rhsa = 0; + if (rhsa + pktlen > 0x8000) { + unsigned i; + u_char *buf = skb_put(skb, pktlen); + for (i=0; i < pktlen ; i++, rhsa++) { + buf[i] = GetByte(XIRCREG_EDP); + if (rhsa == 0x8000) { + rhsa = 0; + i--; + } + } + } else { + insw(ioaddr+XIRCREG_EDP, + skb_put(skb, pktlen), (pktlen+1)>>1); + } + } + #if 0 + else if (lp->mohawk) { + /* To use this 32 bit access we should use + * a manual optimized loop + * Also the words are swapped, we can get more + * performance by using 32 bit access and swapping + * the words in a register. Will need this for cardbus + * + * Note: don't forget to change the ALLOC_SKB to .. +3 + */ + unsigned i; + u_long *p = skb_put(skb, pktlen); + register u_long a; + unsigned int edpreg = ioaddr+XIRCREG_EDP-2; + for (i=0; i < len ; i += 4, p++) { + a = inl(edpreg); + __asm__("rorl $16,%0\n\t" + :"=q" (a) + : "0" (a)); + *p = a; + } + } + #endif + else { + insw(ioaddr+XIRCREG_EDP, skb_put(skb, pktlen), + (pktlen+1)>>1); + } + skb->protocol = eth_type_trans(skb, dev); + netif_rx(skb); + dev->stats.rx_packets++; + dev->stats.rx_bytes += pktlen; + if (!(rsr & PhyPkt)) + dev->stats.multicast++; + } + } else { /* bad packet */ + pr_debug("rsr=%#02x\n", rsr); + } + if (rsr & PktTooLong) { + dev->stats.rx_frame_errors++; + pr_debug("%s: Packet too long\n", dev->name); + } + if (rsr & CRCErr) { + dev->stats.rx_crc_errors++; + pr_debug("%s: CRC error\n", dev->name); + } + if (rsr & AlignErr) { + dev->stats.rx_fifo_errors++; /* okay ? */ + pr_debug("%s: Alignment error\n", dev->name); + } + + /* clear the received/dropped/error packet */ + PutWord(XIRCREG0_DO, 0x8000); /* issue cmd: skip_rx_packet */ + + /* get the new ethernet status */ + eth_status = GetByte(XIRCREG_ESR); + } + if (rx_status & 0x10) { /* Receive overrun */ + dev->stats.rx_over_errors++; + PutByte(XIRCREG_CR, ClearRxOvrun); + pr_debug("receive overrun cleared\n"); + } + + /***** transmit section ******/ + if (int_status & PktTxed) { + unsigned n, nn; + + n = lp->last_ptr_value; + nn = GetByte(XIRCREG0_PTR); + lp->last_ptr_value = nn; + if (nn < n) /* rollover */ + dev->stats.tx_packets += 256 - n; + else if (n == nn) { /* happens sometimes - don't know why */ + pr_debug("PTR not changed?\n"); + } else + dev->stats.tx_packets += lp->last_ptr_value - n; + netif_wake_queue(dev); + } + if (tx_status & 0x0002) { /* Execessive collissions */ + pr_debug("tx restarted due to execssive collissions\n"); + PutByte(XIRCREG_CR, RestartTx); /* restart transmitter process */ + } + if (tx_status & 0x0040) + dev->stats.tx_aborted_errors++; + + /* recalculate our work chunk so that we limit the duration of this + * ISR to about 1/10 of a second. + * Calculate only if we received a reasonable amount of bytes. + */ + if (bytes_rcvd > 1000) { + u_long duration = jiffies - start_ticks; + + if (duration >= HZ/10) { /* if more than about 1/10 second */ + maxrx_bytes = (bytes_rcvd * (HZ/10)) / duration; + if (maxrx_bytes < 2000) + maxrx_bytes = 2000; + else if (maxrx_bytes > 22000) + maxrx_bytes = 22000; + pr_debug("set maxrx=%u (rcvd=%u ticks=%lu)\n", + maxrx_bytes, bytes_rcvd, duration); + } else if (!duration && maxrx_bytes < 22000) { + /* now much faster */ + maxrx_bytes += 2000; + if (maxrx_bytes > 22000) + maxrx_bytes = 22000; + pr_debug("set maxrx=%u\n", maxrx_bytes); + } + } + + leave: + if (lockup_hack) { + if (int_status != 0xff && (int_status = GetByte(XIRCREG_ISR)) != 0) + goto loop_entry; + } + SelectPage(saved_page); + PutByte(XIRCREG_CR, EnableIntr); /* re-enable interrupts */ + /* Instead of dropping packets during a receive, we could + * force an interrupt with this command: + * PutByte(XIRCREG_CR, EnableIntr|ForceIntr); + */ + return IRQ_HANDLED; +} /* xirc2ps_interrupt */ + +/*====================================================================*/ + +static void +xirc2ps_tx_timeout_task(struct work_struct *work) +{ + struct local_info *local = + container_of(work, struct local_info, tx_timeout_task); + struct net_device *dev = local->dev; + /* reset the card */ + do_reset(dev,1); + dev->trans_start = jiffies; /* prevent tx timeout */ + netif_wake_queue(dev); +} + +static void +xirc_tx_timeout(struct net_device *dev) +{ + struct local_info *lp = netdev_priv(dev); + dev->stats.tx_errors++; + netdev_notice(dev, "transmit timed out\n"); + schedule_work(&lp->tx_timeout_task); +} + +static netdev_tx_t +do_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct local_info *lp = netdev_priv(dev); + unsigned int ioaddr = dev->base_addr; + int okay; + unsigned freespace; + unsigned pktlen = skb->len; + + pr_debug("do_start_xmit(skb=%p, dev=%p) len=%u\n", + skb, dev, pktlen); + + + /* adjust the packet length to min. required + * and hope that the buffer is large enough + * to provide some random data. + * fixme: For Mohawk we can change this by sending + * a larger packetlen than we actually have; the chip will + * pad this in his buffer with random bytes + */ + if (pktlen < ETH_ZLEN) + { + if (skb_padto(skb, ETH_ZLEN)) + return NETDEV_TX_OK; + pktlen = ETH_ZLEN; + } + + netif_stop_queue(dev); + SelectPage(0); + PutWord(XIRCREG0_TRS, (u_short)pktlen+2); + freespace = GetWord(XIRCREG0_TSO); + okay = freespace & 0x8000; + freespace &= 0x7fff; + /* TRS doesn't work - (indeed it is eliminated with sil-rev 1) */ + okay = pktlen +2 < freespace; + pr_debug("%s: avail. tx space=%u%s\n", + dev->name, freespace, okay ? " (okay)":" (not enough)"); + if (!okay) { /* not enough space */ + return NETDEV_TX_BUSY; /* upper layer may decide to requeue this packet */ + } + /* send the packet */ + PutWord(XIRCREG_EDP, (u_short)pktlen); + outsw(ioaddr+XIRCREG_EDP, skb->data, pktlen>>1); + if (pktlen & 1) + PutByte(XIRCREG_EDP, skb->data[pktlen-1]); + + if (lp->mohawk) + PutByte(XIRCREG_CR, TransmitPacket|EnableIntr); + + dev_kfree_skb (skb); + dev->stats.tx_bytes += pktlen; + netif_start_queue(dev); + return NETDEV_TX_OK; +} + +struct set_address_info { + int reg_nr; + int page_nr; + int mohawk; + unsigned int ioaddr; +}; + +static void set_address(struct set_address_info *sa_info, char *addr) +{ + unsigned int ioaddr = sa_info->ioaddr; + int i; + + for (i = 0; i < 6; i++) { + if (sa_info->reg_nr > 15) { + sa_info->reg_nr = 8; + sa_info->page_nr++; + SelectPage(sa_info->page_nr); + } + if (sa_info->mohawk) + PutByte(sa_info->reg_nr++, addr[5 - i]); + else + PutByte(sa_info->reg_nr++, addr[i]); + } +} + +/**************** + * Set all addresses: This first one is the individual address, + * the next 9 addresses are taken from the multicast list and + * the rest is filled with the individual address. + */ +static void set_addresses(struct net_device *dev) +{ + unsigned int ioaddr = dev->base_addr; + struct local_info *lp = netdev_priv(dev); + struct netdev_hw_addr *ha; + struct set_address_info sa_info; + int i; + + /* + * Setup the info structure so that by first set_address call it will do + * SelectPage with the right page number. Hence these ones here. + */ + sa_info.reg_nr = 15 + 1; + sa_info.page_nr = 0x50 - 1; + sa_info.mohawk = lp->mohawk; + sa_info.ioaddr = ioaddr; + + set_address(&sa_info, dev->dev_addr); + i = 0; + netdev_for_each_mc_addr(ha, dev) { + if (i++ == 9) + break; + set_address(&sa_info, ha->addr); + } + while (i++ < 9) + set_address(&sa_info, dev->dev_addr); + SelectPage(0); +} + +/**************** + * Set or clear the multicast filter for this adaptor. + * We can filter up to 9 addresses, if more are requested we set + * multicast promiscuous mode. + */ + +static void +set_multicast_list(struct net_device *dev) +{ + unsigned int ioaddr = dev->base_addr; + unsigned value; + + SelectPage(0x42); + value = GetByte(XIRCREG42_SWC1) & 0xC0; + + if (dev->flags & IFF_PROMISC) { /* snoop */ + PutByte(XIRCREG42_SWC1, value | 0x06); /* set MPE and PME */ + } else if (netdev_mc_count(dev) > 9 || (dev->flags & IFF_ALLMULTI)) { + PutByte(XIRCREG42_SWC1, value | 0x02); /* set MPE */ + } else if (!netdev_mc_empty(dev)) { + /* the chip can filter 9 addresses perfectly */ + PutByte(XIRCREG42_SWC1, value | 0x01); + SelectPage(0x40); + PutByte(XIRCREG40_CMD0, Offline); + set_addresses(dev); + SelectPage(0x40); + PutByte(XIRCREG40_CMD0, EnableRecv | Online); + } else { /* standard usage */ + PutByte(XIRCREG42_SWC1, value | 0x00); + } + SelectPage(0); +} + +static int +do_config(struct net_device *dev, struct ifmap *map) +{ + struct local_info *local = netdev_priv(dev); + + pr_debug("do_config(%p)\n", dev); + if (map->port != 255 && map->port != dev->if_port) { + if (map->port > 4) + return -EINVAL; + if (!map->port) { + local->probe_port = 1; + dev->if_port = 1; + } else { + local->probe_port = 0; + dev->if_port = map->port; + } + netdev_info(dev, "switching to %s port\n", if_names[dev->if_port]); + do_reset(dev,1); /* not the fine way :-) */ + } + return 0; +} + +/**************** + * Open the driver + */ +static int +do_open(struct net_device *dev) +{ + struct local_info *lp = netdev_priv(dev); + struct pcmcia_device *link = lp->p_dev; + + dev_dbg(&link->dev, "do_open(%p)\n", dev); + + /* Check that the PCMCIA card is still here. */ + /* Physical device present signature. */ + if (!pcmcia_dev_present(link)) + return -ENODEV; + + /* okay */ + link->open++; + + netif_start_queue(dev); + do_reset(dev,1); + + return 0; +} + +static void netdev_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) +{ + strlcpy(info->driver, "xirc2ps_cs", sizeof(info->driver)); + snprintf(info->bus_info, sizeof(info->bus_info), "PCMCIA 0x%lx", + dev->base_addr); +} + +static const struct ethtool_ops netdev_ethtool_ops = { + .get_drvinfo = netdev_get_drvinfo, +}; + +static int +do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) +{ + struct local_info *local = netdev_priv(dev); + unsigned int ioaddr = dev->base_addr; + struct mii_ioctl_data *data = if_mii(rq); + + pr_debug("%s: ioctl(%-.6s, %#04x) %04x %04x %04x %04x\n", + dev->name, rq->ifr_ifrn.ifrn_name, cmd, + data->phy_id, data->reg_num, data->val_in, data->val_out); + + if (!local->mohawk) + return -EOPNOTSUPP; + + switch(cmd) { + case SIOCGMIIPHY: /* Get the address of the PHY in use. */ + data->phy_id = 0; /* we have only this address */ + /* fall through */ + case SIOCGMIIREG: /* Read the specified MII register. */ + data->val_out = mii_rd(ioaddr, data->phy_id & 0x1f, + data->reg_num & 0x1f); + break; + case SIOCSMIIREG: /* Write the specified MII register */ + mii_wr(ioaddr, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in, + 16); + break; + default: + return -EOPNOTSUPP; + } + return 0; +} + +static void +hardreset(struct net_device *dev) +{ + struct local_info *local = netdev_priv(dev); + unsigned int ioaddr = dev->base_addr; + + SelectPage(4); + udelay(1); + PutByte(XIRCREG4_GPR1, 0); /* clear bit 0: power down */ + msleep(40); /* wait 40 msec */ + if (local->mohawk) + PutByte(XIRCREG4_GPR1, 1); /* set bit 0: power up */ + else + PutByte(XIRCREG4_GPR1, 1 | 4); /* set bit 0: power up, bit 2: AIC */ + msleep(20); /* wait 20 msec */ +} + +static void +do_reset(struct net_device *dev, int full) +{ + struct local_info *local = netdev_priv(dev); + unsigned int ioaddr = dev->base_addr; + unsigned value; + + pr_debug("%s: do_reset(%p,%d)\n", dev? dev->name:"eth?", dev, full); + + hardreset(dev); + PutByte(XIRCREG_CR, SoftReset); /* set */ + msleep(20); /* wait 20 msec */ + PutByte(XIRCREG_CR, 0); /* clear */ + msleep(40); /* wait 40 msec */ + if (local->mohawk) { + SelectPage(4); + /* set pin GP1 and GP2 to output (0x0c) + * set GP1 to low to power up the ML6692 (0x00) + * set GP2 to high to power up the 10Mhz chip (0x02) + */ + PutByte(XIRCREG4_GPR0, 0x0e); + } + + /* give the circuits some time to power up */ + msleep(500); /* about 500ms */ + + local->last_ptr_value = 0; + local->silicon = local->mohawk ? (GetByte(XIRCREG4_BOV) & 0x70) >> 4 + : (GetByte(XIRCREG4_BOV) & 0x30) >> 4; + + if (local->probe_port) { + if (!local->mohawk) { + SelectPage(4); + PutByte(XIRCREG4_GPR0, 4); + local->probe_port = 0; + } + } else if (dev->if_port == 2) { /* enable 10Base2 */ + SelectPage(0x42); + PutByte(XIRCREG42_SWC1, 0xC0); + } else { /* enable 10BaseT */ + SelectPage(0x42); + PutByte(XIRCREG42_SWC1, 0x80); + } + msleep(40); /* wait 40 msec to let it complete */ + + #if 0 + { + SelectPage(0); + value = GetByte(XIRCREG_ESR); /* read the ESR */ + pr_debug("%s: ESR is: %#02x\n", dev->name, value); + } + #endif + + /* setup the ECR */ + SelectPage(1); + PutByte(XIRCREG1_IMR0, 0xff); /* allow all ints */ + PutByte(XIRCREG1_IMR1, 1 ); /* and Set TxUnderrunDetect */ + value = GetByte(XIRCREG1_ECR); + #if 0 + if (local->mohawk) + value |= DisableLinkPulse; + PutByte(XIRCREG1_ECR, value); + #endif + pr_debug("%s: ECR is: %#02x\n", dev->name, value); + + SelectPage(0x42); + PutByte(XIRCREG42_SWC0, 0x20); /* disable source insertion */ + + if (local->silicon != 1) { + /* set the local memory dividing line. + * The comments in the sample code say that this is only + * settable with the scipper version 2 which is revision 0. + * Always for CE3 cards + */ + SelectPage(2); + PutWord(XIRCREG2_RBS, 0x2000); + } + + if (full) + set_addresses(dev); + + /* Hardware workaround: + * The receive byte pointer after reset is off by 1 so we need + * to move the offset pointer back to 0. + */ + SelectPage(0); + PutWord(XIRCREG0_DO, 0x2000); /* change offset command, off=0 */ + + /* setup MAC IMRs and clear status registers */ + SelectPage(0x40); /* Bit 7 ... bit 0 */ + PutByte(XIRCREG40_RMASK0, 0xff); /* ROK, RAB, rsv, RO, CRC, AE, PTL, MP */ + PutByte(XIRCREG40_TMASK0, 0xff); /* TOK, TAB, SQE, LL, TU, JAB, EXC, CRS */ + PutByte(XIRCREG40_TMASK1, 0xb0); /* rsv, rsv, PTD, EXT, rsv,rsv,rsv, rsv*/ + PutByte(XIRCREG40_RXST0, 0x00); /* ROK, RAB, REN, RO, CRC, AE, PTL, MP */ + PutByte(XIRCREG40_TXST0, 0x00); /* TOK, TAB, SQE, LL, TU, JAB, EXC, CRS */ + PutByte(XIRCREG40_TXST1, 0x00); /* TEN, rsv, PTD, EXT, retry_counter:4 */ + + if (full && local->mohawk && init_mii(dev)) { + if (dev->if_port == 4 || local->dingo || local->new_mii) { + netdev_info(dev, "MII selected\n"); + SelectPage(2); + PutByte(XIRCREG2_MSR, GetByte(XIRCREG2_MSR) | 0x08); + msleep(20); + } else { + netdev_info(dev, "MII detected; using 10mbs\n"); + SelectPage(0x42); + if (dev->if_port == 2) /* enable 10Base2 */ + PutByte(XIRCREG42_SWC1, 0xC0); + else /* enable 10BaseT */ + PutByte(XIRCREG42_SWC1, 0x80); + msleep(40); /* wait 40 msec to let it complete */ + } + if (full_duplex) + PutByte(XIRCREG1_ECR, GetByte(XIRCREG1_ECR | FullDuplex)); + } else { /* No MII */ + SelectPage(0); + value = GetByte(XIRCREG_ESR); /* read the ESR */ + dev->if_port = (value & MediaSelect) ? 1 : 2; + } + + /* configure the LEDs */ + SelectPage(2); + if (dev->if_port == 1 || dev->if_port == 4) /* TP: Link and Activity */ + PutByte(XIRCREG2_LED, 0x3b); + else /* Coax: Not-Collision and Activity */ + PutByte(XIRCREG2_LED, 0x3a); + + if (local->dingo) + PutByte(0x0b, 0x04); /* 100 Mbit LED */ + + /* enable receiver and put the mac online */ + if (full) { + set_multicast_list(dev); + SelectPage(0x40); + PutByte(XIRCREG40_CMD0, EnableRecv | Online); + } + + /* setup Ethernet IMR and enable interrupts */ + SelectPage(1); + PutByte(XIRCREG1_IMR0, 0xff); + udelay(1); + SelectPage(0); + PutByte(XIRCREG_CR, EnableIntr); + if (local->modem && !local->dingo) { /* do some magic */ + if (!(GetByte(0x10) & 0x01)) + PutByte(0x10, 0x11); /* unmask master-int bit */ + } + + if (full) + netdev_info(dev, "media %s, silicon revision %d\n", + if_names[dev->if_port], local->silicon); + /* We should switch back to page 0 to avoid a bug in revision 0 + * where regs with offset below 8 can't be read after an access + * to the MAC registers */ + SelectPage(0); +} + +/**************** + * Initialize the Media-Independent-Interface + * Returns: True if we have a good MII + */ +static int +init_mii(struct net_device *dev) +{ + struct local_info *local = netdev_priv(dev); + unsigned int ioaddr = dev->base_addr; + unsigned control, status, linkpartner; + int i; + + if (if_port == 4 || if_port == 1) { /* force 100BaseT or 10BaseT */ + dev->if_port = if_port; + local->probe_port = 0; + return 1; + } + + status = mii_rd(ioaddr, 0, 1); + if ((status & 0xff00) != 0x7800) + return 0; /* No MII */ + + local->new_mii = (mii_rd(ioaddr, 0, 2) != 0xffff); + + if (local->probe_port) + control = 0x1000; /* auto neg */ + else if (dev->if_port == 4) + control = 0x2000; /* no auto neg, 100mbs mode */ + else + control = 0x0000; /* no auto neg, 10mbs mode */ + mii_wr(ioaddr, 0, 0, control, 16); + udelay(100); + control = mii_rd(ioaddr, 0, 0); + + if (control & 0x0400) { + netdev_notice(dev, "can't take PHY out of isolation mode\n"); + local->probe_port = 0; + return 0; + } + + if (local->probe_port) { + /* according to the DP83840A specs the auto negotiation process + * may take up to 3.5 sec, so we use this also for our ML6692 + * Fixme: Better to use a timer here! + */ + for (i=0; i < 35; i++) { + msleep(100); /* wait 100 msec */ + status = mii_rd(ioaddr, 0, 1); + if ((status & 0x0020) && (status & 0x0004)) + break; + } + + if (!(status & 0x0020)) { + netdev_info(dev, "autonegotiation failed; using 10mbs\n"); + if (!local->new_mii) { + control = 0x0000; + mii_wr(ioaddr, 0, 0, control, 16); + udelay(100); + SelectPage(0); + dev->if_port = (GetByte(XIRCREG_ESR) & MediaSelect) ? 1 : 2; + } + } else { + linkpartner = mii_rd(ioaddr, 0, 5); + netdev_info(dev, "MII link partner: %04x\n", linkpartner); + if (linkpartner & 0x0080) { + dev->if_port = 4; + } else + dev->if_port = 1; + } + } + + return 1; +} + +static void +do_powerdown(struct net_device *dev) +{ + + unsigned int ioaddr = dev->base_addr; + + pr_debug("do_powerdown(%p)\n", dev); + + SelectPage(4); + PutByte(XIRCREG4_GPR1, 0); /* clear bit 0: power down */ + SelectPage(0); +} + +static int +do_stop(struct net_device *dev) +{ + unsigned int ioaddr = dev->base_addr; + struct local_info *lp = netdev_priv(dev); + struct pcmcia_device *link = lp->p_dev; + + dev_dbg(&link->dev, "do_stop(%p)\n", dev); + + if (!link) + return -ENODEV; + + netif_stop_queue(dev); + + SelectPage(0); + PutByte(XIRCREG_CR, 0); /* disable interrupts */ + SelectPage(0x01); + PutByte(XIRCREG1_IMR0, 0x00); /* forbid all ints */ + SelectPage(4); + PutByte(XIRCREG4_GPR1, 0); /* clear bit 0: power down */ + SelectPage(0); + + link->open--; + return 0; +} + +static const struct pcmcia_device_id xirc2ps_ids[] = { + PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0089, 0x110a), + PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0138, 0x110a), + PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "CEM28", 0x2e3ee845, 0x0ea978ea), + PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "CEM33", 0x2e3ee845, 0x80609023), + PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "CEM56", 0x2e3ee845, 0xa650c32a), + PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "REM10", 0x2e3ee845, 0x76df1d29), + PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "XEM5600", 0x2e3ee845, 0xf1403719), + PCMCIA_PFC_DEVICE_PROD_ID12(0, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf), + PCMCIA_DEVICE_MANF_CARD(0x01bf, 0x010a), + PCMCIA_DEVICE_PROD_ID13("Toshiba Information Systems", "TPCENET", 0x1b3b94fe, 0xf381c1a2), + PCMCIA_DEVICE_PROD_ID13("Xircom", "CE3-10/100", 0x2e3ee845, 0x0ec0ac37), + PCMCIA_DEVICE_PROD_ID13("Xircom", "PS-CE2-10", 0x2e3ee845, 0x947d9073), + PCMCIA_DEVICE_PROD_ID13("Xircom", "R2E-100BTX", 0x2e3ee845, 0x2464a6e3), + PCMCIA_DEVICE_PROD_ID13("Xircom", "RE-10", 0x2e3ee845, 0x3e08d609), + PCMCIA_DEVICE_PROD_ID13("Xircom", "XE2000", 0x2e3ee845, 0xf7188e46), + PCMCIA_DEVICE_PROD_ID12("Compaq", "Ethernet LAN Card", 0x54f7c49c, 0x9fd2f0a2), + PCMCIA_DEVICE_PROD_ID12("Compaq", "Netelligent 10/100 PC Card", 0x54f7c49c, 0xefe96769), + PCMCIA_DEVICE_PROD_ID12("Intel", "EtherExpress(TM) PRO/100 PC Card Mobile Adapter16", 0x816cc815, 0x174397db), + PCMCIA_DEVICE_PROD_ID12("Toshiba", "10/100 Ethernet PC Card", 0x44a09d9c, 0xb44deecf), + /* also matches CFE-10 cards! */ + /* PCMCIA_DEVICE_MANF_CARD(0x0105, 0x010a), */ + PCMCIA_DEVICE_NULL, +}; +MODULE_DEVICE_TABLE(pcmcia, xirc2ps_ids); + + +static struct pcmcia_driver xirc2ps_cs_driver = { + .owner = THIS_MODULE, + .name = "xirc2ps_cs", + .probe = xirc2ps_probe, + .remove = xirc2ps_detach, + .id_table = xirc2ps_ids, + .suspend = xirc2ps_suspend, + .resume = xirc2ps_resume, +}; +module_pcmcia_driver(xirc2ps_cs_driver); + +#ifndef MODULE +static int __init setup_xirc2ps_cs(char *str) +{ + /* if_port, full_duplex, do_sound, lockup_hack + */ + int ints[10] = { -1 }; + + str = get_options(str, 9, ints); + +#define MAYBE_SET(X,Y) if (ints[0] >= Y && ints[Y] != -1) { X = ints[Y]; } + MAYBE_SET(if_port, 3); + MAYBE_SET(full_duplex, 4); + MAYBE_SET(do_sound, 5); + MAYBE_SET(lockup_hack, 6); +#undef MAYBE_SET + + return 1; +} + +__setup("xirc2ps_cs=", setup_xirc2ps_cs); +#endif |