Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

5 files changed, 7987 insertions, 0 deletions

diff --git a/kernel/drivers/net/ethernet/via/Kconfig b/kernel/drivers/net/ethernet/via/Kconfig
new file mode 100644
index 000000000..f66ddaee0
--- /dev/null
+++ b/kernel/drivers/net/ethernet/via/Kconfig
@@ -0,0 +1,56 @@
+#
+# VIA device configuration
+#
+
+config NET_VENDOR_VIA
+	bool "VIA devices"
+	default y
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about VIA devices. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_VIA
+
+config VIA_RHINE
+	tristate "VIA Rhine support"
+	depends on (PCI || USE_OF)
+	select CRC32
+	select MII
+	---help---
+	  If you have a VIA "Rhine" based network card (Rhine-I (VT86C100A),
+	  Rhine-II (VT6102), or Rhine-III (VT6105)), say Y here. Rhine-type
+	  Ethernet functions can also be found integrated on South Bridges
+	  (e.g. VT8235).
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called via-rhine.
+
+config VIA_RHINE_MMIO
+	bool "Use MMIO instead of PIO"
+	depends on VIA_RHINE
+	---help---
+	  This instructs the driver to use PCI shared memory (MMIO) instead of
+	  programmed I/O ports (PIO). Enabling this gives an improvement in
+	  processing time in parts of the driver.
+
+	  If unsure, say Y.
+
+config VIA_VELOCITY
+	tristate "VIA Velocity support"
+	depends on (PCI || USE_OF)
+	select CRC32
+	select CRC_CCITT
+	select MII
+	---help---
+	  If you have a VIA "Velocity" based network card say Y here.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called via-velocity.
+
+endif # NET_VENDOR_VIA
diff --git a/kernel/drivers/net/ethernet/via/Makefile b/kernel/drivers/net/ethernet/via/Makefile
new file mode 100644
index 000000000..46c5d4a3d
--- /dev/null
+++ b/kernel/drivers/net/ethernet/via/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the VIA device drivers.
+#
+
+obj-$(CONFIG_VIA_RHINE) += via-rhine.o
+obj-$(CONFIG_VIA_VELOCITY) += via-velocity.o
diff --git a/kernel/drivers/net/ethernet/via/via-rhine.c b/kernel/drivers/net/ethernet/via/via-rhine.c
new file mode 100644
index 000000000..de2850497
--- /dev/null
+++ b/kernel/drivers/net/ethernet/via/via-rhine.c
@@ -0,0 +1,2579 @@
+/* via-rhine.c: A Linux Ethernet device driver for VIA Rhine family chips. */
+/*
+	Written 1998-2001 by Donald Becker.
+
+	Current Maintainer: Roger Luethi <rl@hellgate.ch>
+
+	This software may be used and distributed according to the terms of
+	the GNU General Public License (GPL), incorporated herein by reference.
+	Drivers based on or derived from this code fall under the GPL and must
+	retain the authorship, copyright and license notice.  This file is not
+	a complete program and may only be used when the entire operating
+	system is licensed under the GPL.
+
+	This driver is designed for the VIA VT86C100A Rhine-I.
+	It also works with the Rhine-II (6102) and Rhine-III (6105/6105L/6105LOM
+	and management NIC 6105M).
+
+	The author may be reached as becker@scyld.com, or C/O
+	Scyld Computing Corporation
+	410 Severn Ave., Suite 210
+	Annapolis MD 21403
+
+
+	This driver contains some changes from the original Donald Becker
+	version. He may or may not be interested in bug reports on this
+	code. You can find his versions at:
+	http://www.scyld.com/network/via-rhine.html
+	[link no longer provides useful info -jgarzik]
+
+*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#define DRV_NAME	"via-rhine"
+#define DRV_VERSION	"1.5.1"
+#define DRV_RELDATE	"2010-10-09"
+
+#include <linux/types.h>
+
+/* A few user-configurable values.
+   These may be modified when a driver module is loaded. */
+static int debug = 0;
+#define RHINE_MSG_DEFAULT \
+        (0x0000)
+
+/* Set the copy breakpoint for the copy-only-tiny-frames scheme.
+   Setting to > 1518 effectively disables this feature. */
+#if defined(__alpha__) || defined(__arm__) || defined(__hppa__) || \
+	defined(CONFIG_SPARC) || defined(__ia64__) ||		   \
+	defined(__sh__) || defined(__mips__)
+static int rx_copybreak = 1518;
+#else
+static int rx_copybreak;
+#endif
+
+/* Work-around for broken BIOSes: they are unable to get the chip back out of
+   power state D3 so PXE booting fails. bootparam(7): via-rhine.avoid_D3=1 */
+static bool avoid_D3;
+
+/*
+ * In case you are looking for 'options[]' or 'full_duplex[]', they
+ * are gone. Use ethtool(8) instead.
+ */
+
+/* Maximum number of multicast addresses to filter (vs. rx-all-multicast).
+   The Rhine has a 64 element 8390-like hash table. */
+static const int multicast_filter_limit = 32;
+
+
+/* Operational parameters that are set at compile time. */
+
+/* Keep the ring sizes a power of two for compile efficiency.
+ * The compiler will convert <unsigned>'%'<2^N> into a bit mask.
+ * Making the Tx ring too large decreases the effectiveness of channel
+ * bonding and packet priority.
+ * With BQL support, we can increase TX ring safely.
+ * There are no ill effects from too-large receive rings.
+ */
+#define TX_RING_SIZE	64
+#define TX_QUEUE_LEN	(TX_RING_SIZE - 6)	/* Limit ring entries actually used. */
+#define RX_RING_SIZE	64
+
+/* Operational parameters that usually are not changed. */
+
+/* Time in jiffies before concluding the transmitter is hung. */
+#define TX_TIMEOUT	(2*HZ)
+
+#define PKT_BUF_SZ	1536	/* Size of each temporary Rx buffer.*/
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/crc32.h>
+#include <linux/if_vlan.h>
+#include <linux/bitops.h>
+#include <linux/workqueue.h>
+#include <asm/processor.h>	/* Processor type for cache alignment. */
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+#include <linux/dmi.h>
+
+/* These identify the driver base version and may not be removed. */
+static const char version[] =
+	"v1.10-LK" DRV_VERSION " " DRV_RELDATE " Written by Donald Becker";
+
+MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
+MODULE_DESCRIPTION("VIA Rhine PCI Fast Ethernet driver");
+MODULE_LICENSE("GPL");
+
+module_param(debug, int, 0);
+module_param(rx_copybreak, int, 0);
+module_param(avoid_D3, bool, 0);
+MODULE_PARM_DESC(debug, "VIA Rhine debug message flags");
+MODULE_PARM_DESC(rx_copybreak, "VIA Rhine copy breakpoint for copy-only-tiny-frames");
+MODULE_PARM_DESC(avoid_D3, "Avoid power state D3 (work-around for broken BIOSes)");
+
+#define MCAM_SIZE	32
+#define VCAM_SIZE	32
+
+/*
+		Theory of Operation
+
+I. Board Compatibility
+
+This driver is designed for the VIA 86c100A Rhine-II PCI Fast Ethernet
+controller.
+
+II. Board-specific settings
+
+Boards with this chip are functional only in a bus-master PCI slot.
+
+Many operational settings are loaded from the EEPROM to the Config word at
+offset 0x78. For most of these settings, this driver assumes that they are
+correct.
+If this driver is compiled to use PCI memory space operations the EEPROM
+must be configured to enable memory ops.
+
+III. Driver operation
+
+IIIa. Ring buffers
+
+This driver uses two statically allocated fixed-size descriptor lists
+formed into rings by a branch from the final descriptor to the beginning of
+the list. The ring sizes are set at compile time by RX/TX_RING_SIZE.
+
+IIIb/c. Transmit/Receive Structure
+
+This driver attempts to use a zero-copy receive and transmit scheme.
+
+Alas, all data buffers are required to start on a 32 bit boundary, so
+the driver must often copy transmit packets into bounce buffers.
+
+The driver allocates full frame size skbuffs for the Rx ring buffers at
+open() time and passes the skb->data field to the chip as receive data
+buffers. When an incoming frame is less than RX_COPYBREAK bytes long,
+a fresh skbuff is allocated and the frame is copied to the new skbuff.
+When the incoming frame is larger, the skbuff is passed directly up the
+protocol stack. Buffers consumed this way are replaced by newly allocated
+skbuffs in the last phase of rhine_rx().
+
+The RX_COPYBREAK value is chosen to trade-off the memory wasted by
+using a full-sized skbuff for small frames vs. the copying costs of larger
+frames. New boards are typically used in generously configured machines
+and the underfilled buffers have negligible impact compared to the benefit of
+a single allocation size, so the default value of zero results in never
+copying packets. When copying is done, the cost is usually mitigated by using
+a combined copy/checksum routine. Copying also preloads the cache, which is
+most useful with small frames.
+
+Since the VIA chips are only able to transfer data to buffers on 32 bit
+boundaries, the IP header at offset 14 in an ethernet frame isn't
+longword aligned for further processing. Copying these unaligned buffers
+has the beneficial effect of 16-byte aligning the IP header.
+
+IIId. Synchronization
+
+The driver runs as two independent, single-threaded flows of control. One
+is the send-packet routine, which enforces single-threaded use by the
+netdev_priv(dev)->lock spinlock. The other thread is the interrupt handler,
+which is single threaded by the hardware and interrupt handling software.
+
+The send packet thread has partial control over the Tx ring. It locks the
+netdev_priv(dev)->lock whenever it's queuing a Tx packet. If the next slot in
+the ring is not available it stops the transmit queue by
+calling netif_stop_queue.
+
+The interrupt handler has exclusive control over the Rx ring and records stats
+from the Tx ring. After reaping the stats, it marks the Tx queue entry as
+empty by incrementing the dirty_tx mark. If at least half of the entries in
+the Rx ring are available the transmit queue is woken up if it was stopped.
+
+IV. Notes
+
+IVb. References
+
+Preliminary VT86C100A manual from http://www.via.com.tw/
+http://www.scyld.com/expert/100mbps.html
+http://www.scyld.com/expert/NWay.html
+ftp://ftp.via.com.tw/public/lan/Products/NIC/VT86C100A/Datasheet/VT86C100A03.pdf
+ftp://ftp.via.com.tw/public/lan/Products/NIC/VT6102/Datasheet/VT6102_021.PDF
+
+
+IVc. Errata
+
+The VT86C100A manual is not reliable information.
+The 3043 chip does not handle unaligned transmit or receive buffers, resulting
+in significant performance degradation for bounce buffer copies on transmit
+and unaligned IP headers on receive.
+The chip does not pad to minimum transmit length.
+
+*/
+
+
+/* This table drives the PCI probe routines. It's mostly boilerplate in all
+   of the drivers, and will likely be provided by some future kernel.
+   Note the matching code -- the first table entry matchs all 56** cards but
+   second only the 1234 card.
+*/
+
+enum rhine_revs {
+	VT86C100A	= 0x00,
+	VTunknown0	= 0x20,
+	VT6102		= 0x40,
+	VT8231		= 0x50,	/* Integrated MAC */
+	VT8233		= 0x60,	/* Integrated MAC */
+	VT8235		= 0x74,	/* Integrated MAC */
+	VT8237		= 0x78,	/* Integrated MAC */
+	VTunknown1	= 0x7C,
+	VT6105		= 0x80,
+	VT6105_B0	= 0x83,
+	VT6105L		= 0x8A,
+	VT6107		= 0x8C,
+	VTunknown2	= 0x8E,
+	VT6105M		= 0x90,	/* Management adapter */
+};
+
+enum rhine_quirks {
+	rqWOL		= 0x0001,	/* Wake-On-LAN support */
+	rqForceReset	= 0x0002,
+	rq6patterns	= 0x0040,	/* 6 instead of 4 patterns for WOL */
+	rqStatusWBRace	= 0x0080,	/* Tx Status Writeback Error possible */
+	rqRhineI	= 0x0100,	/* See comment below */
+	rqIntPHY	= 0x0200,	/* Integrated PHY */
+	rqMgmt		= 0x0400,	/* Management adapter */
+	rqNeedEnMMIO	= 0x0800,	/* Whether the core needs to be
+					 * switched from PIO mode to MMIO
+					 * (only applies to PCI)
+					 */
+};
+/*
+ * rqRhineI: VT86C100A (aka Rhine-I) uses different bits to enable
+ * MMIO as well as for the collision counter and the Tx FIFO underflow
+ * indicator. In addition, Tx and Rx buffers need to 4 byte aligned.
+ */
+
+/* Beware of PCI posted writes */
+#define IOSYNC	do { ioread8(ioaddr + StationAddr); } while (0)
+
+static const struct pci_device_id rhine_pci_tbl[] = {
+	{ 0x1106, 0x3043, PCI_ANY_ID, PCI_ANY_ID, },	/* VT86C100A */
+	{ 0x1106, 0x3065, PCI_ANY_ID, PCI_ANY_ID, },	/* VT6102 */
+	{ 0x1106, 0x3106, PCI_ANY_ID, PCI_ANY_ID, },	/* 6105{,L,LOM} */
+	{ 0x1106, 0x3053, PCI_ANY_ID, PCI_ANY_ID, },	/* VT6105M */
+	{ }	/* terminate list */
+};
+MODULE_DEVICE_TABLE(pci, rhine_pci_tbl);
+
+/* OpenFirmware identifiers for platform-bus devices
+ * The .data field is currently only used to store quirks
+ */
+static u32 vt8500_quirks = rqWOL | rqForceReset | rq6patterns;
+static const struct of_device_id rhine_of_tbl[] = {
+	{ .compatible = "via,vt8500-rhine", .data = &vt8500_quirks },
+	{ }	/* terminate list */
+};
+MODULE_DEVICE_TABLE(of, rhine_of_tbl);
+
+/* Offsets to the device registers. */
+enum register_offsets {
+	StationAddr=0x00, RxConfig=0x06, TxConfig=0x07, ChipCmd=0x08,
+	ChipCmd1=0x09, TQWake=0x0A,
+	IntrStatus=0x0C, IntrEnable=0x0E,
+	MulticastFilter0=0x10, MulticastFilter1=0x14,
+	RxRingPtr=0x18, TxRingPtr=0x1C, GFIFOTest=0x54,
+	MIIPhyAddr=0x6C, MIIStatus=0x6D, PCIBusConfig=0x6E, PCIBusConfig1=0x6F,
+	MIICmd=0x70, MIIRegAddr=0x71, MIIData=0x72, MACRegEEcsr=0x74,
+	ConfigA=0x78, ConfigB=0x79, ConfigC=0x7A, ConfigD=0x7B,
+	RxMissed=0x7C, RxCRCErrs=0x7E, MiscCmd=0x81,
+	StickyHW=0x83, IntrStatus2=0x84,
+	CamMask=0x88, CamCon=0x92, CamAddr=0x93,
+	WOLcrSet=0xA0, PwcfgSet=0xA1, WOLcgSet=0xA3, WOLcrClr=0xA4,
+	WOLcrClr1=0xA6, WOLcgClr=0xA7,
+	PwrcsrSet=0xA8, PwrcsrSet1=0xA9, PwrcsrClr=0xAC, PwrcsrClr1=0xAD,
+};
+
+/* Bits in ConfigD */
+enum backoff_bits {
+	BackOptional=0x01, BackModify=0x02,
+	BackCaptureEffect=0x04, BackRandom=0x08
+};
+
+/* Bits in the TxConfig (TCR) register */
+enum tcr_bits {
+	TCR_PQEN=0x01,
+	TCR_LB0=0x02,		/* loopback[0] */
+	TCR_LB1=0x04,		/* loopback[1] */
+	TCR_OFSET=0x08,
+	TCR_RTGOPT=0x10,
+	TCR_RTFT0=0x20,
+	TCR_RTFT1=0x40,
+	TCR_RTSF=0x80,
+};
+
+/* Bits in the CamCon (CAMC) register */
+enum camcon_bits {
+	CAMC_CAMEN=0x01,
+	CAMC_VCAMSL=0x02,
+	CAMC_CAMWR=0x04,
+	CAMC_CAMRD=0x08,
+};
+
+/* Bits in the PCIBusConfig1 (BCR1) register */
+enum bcr1_bits {
+	BCR1_POT0=0x01,
+	BCR1_POT1=0x02,
+	BCR1_POT2=0x04,
+	BCR1_CTFT0=0x08,
+	BCR1_CTFT1=0x10,
+	BCR1_CTSF=0x20,
+	BCR1_TXQNOBK=0x40,	/* for VT6105 */
+	BCR1_VIDFR=0x80,	/* for VT6105 */
+	BCR1_MED0=0x40,		/* for VT6102 */
+	BCR1_MED1=0x80,		/* for VT6102 */
+};
+
+/* Registers we check that mmio and reg are the same. */
+static const int mmio_verify_registers[] = {
+	RxConfig, TxConfig, IntrEnable, ConfigA, ConfigB, ConfigC, ConfigD,
+	0
+};
+
+/* Bits in the interrupt status/mask registers. */
+enum intr_status_bits {
+	IntrRxDone	= 0x0001,
+	IntrTxDone	= 0x0002,
+	IntrRxErr	= 0x0004,
+	IntrTxError	= 0x0008,
+	IntrRxEmpty	= 0x0020,
+	IntrPCIErr	= 0x0040,
+	IntrStatsMax	= 0x0080,
+	IntrRxEarly	= 0x0100,
+	IntrTxUnderrun	= 0x0210,
+	IntrRxOverflow	= 0x0400,
+	IntrRxDropped	= 0x0800,
+	IntrRxNoBuf	= 0x1000,
+	IntrTxAborted	= 0x2000,
+	IntrLinkChange	= 0x4000,
+	IntrRxWakeUp	= 0x8000,
+	IntrTxDescRace		= 0x080000,	/* mapped from IntrStatus2 */
+	IntrNormalSummary	= IntrRxDone | IntrTxDone,
+	IntrTxErrSummary	= IntrTxDescRace | IntrTxAborted | IntrTxError |
+				  IntrTxUnderrun,
+};
+
+/* Bits in WOLcrSet/WOLcrClr and PwrcsrSet/PwrcsrClr */
+enum wol_bits {
+	WOLucast	= 0x10,
+	WOLmagic	= 0x20,
+	WOLbmcast	= 0x30,
+	WOLlnkon	= 0x40,
+	WOLlnkoff	= 0x80,
+};
+
+/* The Rx and Tx buffer descriptors. */
+struct rx_desc {
+	__le32 rx_status;
+	__le32 desc_length; /* Chain flag, Buffer/frame length */
+	__le32 addr;
+	__le32 next_desc;
+};
+struct tx_desc {
+	__le32 tx_status;
+	__le32 desc_length; /* Chain flag, Tx Config, Frame length */
+	__le32 addr;
+	__le32 next_desc;
+};
+
+/* Initial value for tx_desc.desc_length, Buffer size goes to bits 0-10 */
+#define TXDESC		0x00e08000
+
+enum rx_status_bits {
+	RxOK=0x8000, RxWholePkt=0x0300, RxErr=0x008F
+};
+
+/* Bits in *_desc.*_status */
+enum desc_status_bits {
+	DescOwn=0x80000000
+};
+
+/* Bits in *_desc.*_length */
+enum desc_length_bits {
+	DescTag=0x00010000
+};
+
+/* Bits in ChipCmd. */
+enum chip_cmd_bits {
+	CmdInit=0x01, CmdStart=0x02, CmdStop=0x04, CmdRxOn=0x08,
+	CmdTxOn=0x10, Cmd1TxDemand=0x20, CmdRxDemand=0x40,
+	Cmd1EarlyRx=0x01, Cmd1EarlyTx=0x02, Cmd1FDuplex=0x04,
+	Cmd1NoTxPoll=0x08, Cmd1Reset=0x80,
+};
+
+struct rhine_stats {
+	u64		packets;
+	u64		bytes;
+	struct u64_stats_sync syncp;
+};
+
+struct rhine_private {
+	/* Bit mask for configured VLAN ids */
+	unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
+
+	/* Descriptor rings */
+	struct rx_desc *rx_ring;
+	struct tx_desc *tx_ring;
+	dma_addr_t rx_ring_dma;
+	dma_addr_t tx_ring_dma;
+
+	/* The addresses of receive-in-place skbuffs. */
+	struct sk_buff *rx_skbuff[RX_RING_SIZE];
+	dma_addr_t rx_skbuff_dma[RX_RING_SIZE];
+
+	/* The saved address of a sent-in-place packet/buffer, for later free(). */
+	struct sk_buff *tx_skbuff[TX_RING_SIZE];
+	dma_addr_t tx_skbuff_dma[TX_RING_SIZE];
+
+	/* Tx bounce buffers (Rhine-I only) */
+	unsigned char *tx_buf[TX_RING_SIZE];
+	unsigned char *tx_bufs;
+	dma_addr_t tx_bufs_dma;
+
+	int irq;
+	long pioaddr;
+	struct net_device *dev;
+	struct napi_struct napi;
+	spinlock_t lock;
+	struct mutex task_lock;
+	bool task_enable;
+	struct work_struct slow_event_task;
+	struct work_struct reset_task;
+
+	u32 msg_enable;
+
+	/* Frequently used values: keep some adjacent for cache effect. */
+	u32 quirks;
+	struct rx_desc *rx_head_desc;
+	unsigned int cur_rx, dirty_rx;	/* Producer/consumer ring indices */
+	unsigned int cur_tx, dirty_tx;
+	unsigned int rx_buf_sz;		/* Based on MTU+slack. */
+	struct rhine_stats rx_stats;
+	struct rhine_stats tx_stats;
+	u8 wolopts;
+
+	u8 tx_thresh, rx_thresh;
+
+	struct mii_if_info mii_if;
+	void __iomem *base;
+};
+
+#define BYTE_REG_BITS_ON(x, p)      do { iowrite8((ioread8((p))|(x)), (p)); } while (0)
+#define WORD_REG_BITS_ON(x, p)      do { iowrite16((ioread16((p))|(x)), (p)); } while (0)
+#define DWORD_REG_BITS_ON(x, p)     do { iowrite32((ioread32((p))|(x)), (p)); } while (0)
+
+#define BYTE_REG_BITS_IS_ON(x, p)   (ioread8((p)) & (x))
+#define WORD_REG_BITS_IS_ON(x, p)   (ioread16((p)) & (x))
+#define DWORD_REG_BITS_IS_ON(x, p)  (ioread32((p)) & (x))
+
+#define BYTE_REG_BITS_OFF(x, p)     do { iowrite8(ioread8((p)) & (~(x)), (p)); } while (0)
+#define WORD_REG_BITS_OFF(x, p)     do { iowrite16(ioread16((p)) & (~(x)), (p)); } while (0)
+#define DWORD_REG_BITS_OFF(x, p)    do { iowrite32(ioread32((p)) & (~(x)), (p)); } while (0)
+
+#define BYTE_REG_BITS_SET(x, m, p)   do { iowrite8((ioread8((p)) & (~(m)))|(x), (p)); } while (0)
+#define WORD_REG_BITS_SET(x, m, p)   do { iowrite16((ioread16((p)) & (~(m)))|(x), (p)); } while (0)
+#define DWORD_REG_BITS_SET(x, m, p)  do { iowrite32((ioread32((p)) & (~(m)))|(x), (p)); } while (0)
+
+
+static int  mdio_read(struct net_device *dev, int phy_id, int location);
+static void mdio_write(struct net_device *dev, int phy_id, int location, int value);
+static int  rhine_open(struct net_device *dev);
+static void rhine_reset_task(struct work_struct *work);
+static void rhine_slow_event_task(struct work_struct *work);
+static void rhine_tx_timeout(struct net_device *dev);
+static netdev_tx_t rhine_start_tx(struct sk_buff *skb,
+				  struct net_device *dev);
+static irqreturn_t rhine_interrupt(int irq, void *dev_instance);
+static void rhine_tx(struct net_device *dev);
+static int rhine_rx(struct net_device *dev, int limit);
+static void rhine_set_rx_mode(struct net_device *dev);
+static struct rtnl_link_stats64 *rhine_get_stats64(struct net_device *dev,
+	       struct rtnl_link_stats64 *stats);
+static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+static const struct ethtool_ops netdev_ethtool_ops;
+static int  rhine_close(struct net_device *dev);
+static int rhine_vlan_rx_add_vid(struct net_device *dev,
+				 __be16 proto, u16 vid);
+static int rhine_vlan_rx_kill_vid(struct net_device *dev,
+				  __be16 proto, u16 vid);
+static void rhine_restart_tx(struct net_device *dev);
+
+static void rhine_wait_bit(struct rhine_private *rp, u8 reg, u8 mask, bool low)
+{
+	void __iomem *ioaddr = rp->base;
+	int i;
+
+	for (i = 0; i < 1024; i++) {
+		bool has_mask_bits = !!(ioread8(ioaddr + reg) & mask);
+
+		if (low ^ has_mask_bits)
+			break;
+		udelay(10);
+	}
+	if (i > 64) {
+		netif_dbg(rp, hw, rp->dev, "%s bit wait (%02x/%02x) cycle "
+			  "count: %04d\n", low ? "low" : "high", reg, mask, i);
+	}
+}
+
+static void rhine_wait_bit_high(struct rhine_private *rp, u8 reg, u8 mask)
+{
+	rhine_wait_bit(rp, reg, mask, false);
+}
+
+static void rhine_wait_bit_low(struct rhine_private *rp, u8 reg, u8 mask)
+{
+	rhine_wait_bit(rp, reg, mask, true);
+}
+
+static u32 rhine_get_events(struct rhine_private *rp)
+{
+	void __iomem *ioaddr = rp->base;
+	u32 intr_status;
+
+	intr_status = ioread16(ioaddr + IntrStatus);
+	/* On Rhine-II, Bit 3 indicates Tx descriptor write-back race. */
+	if (rp->quirks & rqStatusWBRace)
+		intr_status |= ioread8(ioaddr + IntrStatus2) << 16;
+	return intr_status;
+}
+
+static void rhine_ack_events(struct rhine_private *rp, u32 mask)
+{
+	void __iomem *ioaddr = rp->base;
+
+	if (rp->quirks & rqStatusWBRace)
+		iowrite8(mask >> 16, ioaddr + IntrStatus2);
+	iowrite16(mask, ioaddr + IntrStatus);
+	mmiowb();
+}
+
+/*
+ * Get power related registers into sane state.
+ * Notify user about past WOL event.
+ */
+static void rhine_power_init(struct net_device *dev)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+	void __iomem *ioaddr = rp->base;
+	u16 wolstat;
+
+	if (rp->quirks & rqWOL) {
+		/* Make sure chip is in power state D0 */
+		iowrite8(ioread8(ioaddr + StickyHW) & 0xFC, ioaddr + StickyHW);
+
+		/* Disable "force PME-enable" */
+		iowrite8(0x80, ioaddr + WOLcgClr);
+
+		/* Clear power-event config bits (WOL) */
+		iowrite8(0xFF, ioaddr + WOLcrClr);
+		/* More recent cards can manage two additional patterns */
+		if (rp->quirks & rq6patterns)
+			iowrite8(0x03, ioaddr + WOLcrClr1);
+
+		/* Save power-event status bits */
+		wolstat = ioread8(ioaddr + PwrcsrSet);
+		if (rp->quirks & rq6patterns)
+			wolstat |= (ioread8(ioaddr + PwrcsrSet1) & 0x03) << 8;
+
+		/* Clear power-event status bits */
+		iowrite8(0xFF, ioaddr + PwrcsrClr);
+		if (rp->quirks & rq6patterns)
+			iowrite8(0x03, ioaddr + PwrcsrClr1);
+
+		if (wolstat) {
+			char *reason;
+			switch (wolstat) {
+			case WOLmagic:
+				reason = "Magic packet";
+				break;
+			case WOLlnkon:
+				reason = "Link went up";
+				break;
+			case WOLlnkoff:
+				reason = "Link went down";
+				break;
+			case WOLucast:
+				reason = "Unicast packet";
+				break;
+			case WOLbmcast:
+				reason = "Multicast/broadcast packet";
+				break;
+			default:
+				reason = "Unknown";
+			}
+			netdev_info(dev, "Woke system up. Reason: %s\n",
+				    reason);
+		}
+	}
+}
+
+static void rhine_chip_reset(struct net_device *dev)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+	void __iomem *ioaddr = rp->base;
+	u8 cmd1;
+
+	iowrite8(Cmd1Reset, ioaddr + ChipCmd1);
+	IOSYNC;
+
+	if (ioread8(ioaddr + ChipCmd1) & Cmd1Reset) {
+		netdev_info(dev, "Reset not complete yet. Trying harder.\n");
+
+		/* Force reset */
+		if (rp->quirks & rqForceReset)
+			iowrite8(0x40, ioaddr + MiscCmd);
+
+		/* Reset can take somewhat longer (rare) */
+		rhine_wait_bit_low(rp, ChipCmd1, Cmd1Reset);
+	}
+
+	cmd1 = ioread8(ioaddr + ChipCmd1);
+	netif_info(rp, hw, dev, "Reset %s\n", (cmd1 & Cmd1Reset) ?
+		   "failed" : "succeeded");
+}
+
+static void enable_mmio(long pioaddr, u32 quirks)
+{
+	int n;
+
+	if (quirks & rqNeedEnMMIO) {
+		if (quirks & rqRhineI) {
+			/* More recent docs say that this bit is reserved */
+			n = inb(pioaddr + ConfigA) | 0x20;
+			outb(n, pioaddr + ConfigA);
+		} else {
+			n = inb(pioaddr + ConfigD) | 0x80;
+			outb(n, pioaddr + ConfigD);
+		}
+	}
+}
+
+static inline int verify_mmio(struct device *hwdev,
+			      long pioaddr,
+			      void __iomem *ioaddr,
+			      u32 quirks)
+{
+	if (quirks & rqNeedEnMMIO) {
+		int i = 0;
+
+		/* Check that selected MMIO registers match the PIO ones */
+		while (mmio_verify_registers[i]) {
+			int reg = mmio_verify_registers[i++];
+			unsigned char a = inb(pioaddr+reg);
+			unsigned char b = readb(ioaddr+reg);
+
+			if (a != b) {
+				dev_err(hwdev,
+					"MMIO do not match PIO [%02x] (%02x != %02x)\n",
+					reg, a, b);
+				return -EIO;
+			}
+		}
+	}
+	return 0;
+}
+
+/*
+ * Loads bytes 0x00-0x05, 0x6E-0x6F, 0x78-0x7B from EEPROM
+ * (plus 0x6C for Rhine-I/II)
+ */
+static void rhine_reload_eeprom(long pioaddr, struct net_device *dev)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+	void __iomem *ioaddr = rp->base;
+	int i;
+
+	outb(0x20, pioaddr + MACRegEEcsr);
+	for (i = 0; i < 1024; i++) {
+		if (!(inb(pioaddr + MACRegEEcsr) & 0x20))
+			break;
+	}
+	if (i > 512)
+		pr_info("%4d cycles used @ %s:%d\n", i, __func__, __LINE__);
+
+	/*
+	 * Reloading from EEPROM overwrites ConfigA-D, so we must re-enable
+	 * MMIO. If reloading EEPROM was done first this could be avoided, but
+	 * it is not known if that still works with the "win98-reboot" problem.
+	 */
+	enable_mmio(pioaddr, rp->quirks);
+
+	/* Turn off EEPROM-controlled wake-up (magic packet) */
+	if (rp->quirks & rqWOL)
+		iowrite8(ioread8(ioaddr + ConfigA) & 0xFC, ioaddr + ConfigA);
+
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void rhine_poll(struct net_device *dev)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+	const int irq = rp->irq;
+
+	disable_irq(irq);
+	rhine_interrupt(irq, dev);
+	enable_irq(irq);
+}
+#endif
+
+static void rhine_kick_tx_threshold(struct rhine_private *rp)
+{
+	if (rp->tx_thresh < 0xe0) {
+		void __iomem *ioaddr = rp->base;
+
+		rp->tx_thresh += 0x20;
+		BYTE_REG_BITS_SET(rp->tx_thresh, 0x80, ioaddr + TxConfig);
+	}
+}
+
+static void rhine_tx_err(struct rhine_private *rp, u32 status)
+{
+	struct net_device *dev = rp->dev;
+
+	if (status & IntrTxAborted) {
+		netif_info(rp, tx_err, dev,
+			   "Abort %08x, frame dropped\n", status);
+	}
+
+	if (status & IntrTxUnderrun) {
+		rhine_kick_tx_threshold(rp);
+		netif_info(rp, tx_err ,dev, "Transmitter underrun, "
+			   "Tx threshold now %02x\n", rp->tx_thresh);
+	}
+
+	if (status & IntrTxDescRace)
+		netif_info(rp, tx_err, dev, "Tx descriptor write-back race\n");
+
+	if ((status & IntrTxError) &&
+	    (status & (IntrTxAborted | IntrTxUnderrun | IntrTxDescRace)) == 0) {
+		rhine_kick_tx_threshold(rp);
+		netif_info(rp, tx_err, dev, "Unspecified error. "
+			   "Tx threshold now %02x\n", rp->tx_thresh);
+	}
+
+	rhine_restart_tx(dev);
+}
+
+static void rhine_update_rx_crc_and_missed_errord(struct rhine_private *rp)
+{
+	void __iomem *ioaddr = rp->base;
+	struct net_device_stats *stats = &rp->dev->stats;
+
+	stats->rx_crc_errors    += ioread16(ioaddr + RxCRCErrs);
+	stats->rx_missed_errors += ioread16(ioaddr + RxMissed);
+
+	/*
+	 * Clears the "tally counters" for CRC errors and missed frames(?).
+	 * It has been reported that some chips need a write of 0 to clear
+	 * these, for others the counters are set to 1 when written to and
+	 * instead cleared when read. So we clear them both ways ...
+	 */
+	iowrite32(0, ioaddr + RxMissed);
+	ioread16(ioaddr + RxCRCErrs);
+	ioread16(ioaddr + RxMissed);
+}
+
+#define RHINE_EVENT_NAPI_RX	(IntrRxDone | \
+				 IntrRxErr | \
+				 IntrRxEmpty | \
+				 IntrRxOverflow	| \
+				 IntrRxDropped | \
+				 IntrRxNoBuf | \
+				 IntrRxWakeUp)
+
+#define RHINE_EVENT_NAPI_TX_ERR	(IntrTxError | \
+				 IntrTxAborted | \
+				 IntrTxUnderrun | \
+				 IntrTxDescRace)
+#define RHINE_EVENT_NAPI_TX	(IntrTxDone | RHINE_EVENT_NAPI_TX_ERR)
+
+#define RHINE_EVENT_NAPI	(RHINE_EVENT_NAPI_RX | \
+				 RHINE_EVENT_NAPI_TX | \
+				 IntrStatsMax)
+#define RHINE_EVENT_SLOW	(IntrPCIErr | IntrLinkChange)
+#define RHINE_EVENT		(RHINE_EVENT_NAPI | RHINE_EVENT_SLOW)
+
+static int rhine_napipoll(struct napi_struct *napi, int budget)
+{
+	struct rhine_private *rp = container_of(napi, struct rhine_private, napi);
+	struct net_device *dev = rp->dev;
+	void __iomem *ioaddr = rp->base;
+	u16 enable_mask = RHINE_EVENT & 0xffff;
+	int work_done = 0;
+	u32 status;
+
+	status = rhine_get_events(rp);
+	rhine_ack_events(rp, status & ~RHINE_EVENT_SLOW);
+
+	if (status & RHINE_EVENT_NAPI_RX)
+		work_done += rhine_rx(dev, budget);
+
+	if (status & RHINE_EVENT_NAPI_TX) {
+		if (status & RHINE_EVENT_NAPI_TX_ERR) {
+			/* Avoid scavenging before Tx engine turned off */
+			rhine_wait_bit_low(rp, ChipCmd, CmdTxOn);
+			if (ioread8(ioaddr + ChipCmd) & CmdTxOn)
+				netif_warn(rp, tx_err, dev, "Tx still on\n");
+		}
+
+		rhine_tx(dev);
+
+		if (status & RHINE_EVENT_NAPI_TX_ERR)
+			rhine_tx_err(rp, status);
+	}
+
+	if (status & IntrStatsMax) {
+		spin_lock(&rp->lock);
+		rhine_update_rx_crc_and_missed_errord(rp);
+		spin_unlock(&rp->lock);
+	}
+
+	if (status & RHINE_EVENT_SLOW) {
+		enable_mask &= ~RHINE_EVENT_SLOW;
+		schedule_work(&rp->slow_event_task);
+	}
+
+	if (work_done < budget) {
+		napi_complete(napi);
+		iowrite16(enable_mask, ioaddr + IntrEnable);
+		mmiowb();
+	}
+	return work_done;
+}
+
+static void rhine_hw_init(struct net_device *dev, long pioaddr)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+
+	/* Reset the chip to erase previous misconfiguration. */
+	rhine_chip_reset(dev);
+
+	/* Rhine-I needs extra time to recuperate before EEPROM reload */
+	if (rp->quirks & rqRhineI)
+		msleep(5);
+
+	/* Reload EEPROM controlled bytes cleared by soft reset */
+	if (dev_is_pci(dev->dev.parent))
+		rhine_reload_eeprom(pioaddr, dev);
+}
+
+static const struct net_device_ops rhine_netdev_ops = {
+	.ndo_open		 = rhine_open,
+	.ndo_stop		 = rhine_close,
+	.ndo_start_xmit		 = rhine_start_tx,
+	.ndo_get_stats64	 = rhine_get_stats64,
+	.ndo_set_rx_mode	 = rhine_set_rx_mode,
+	.ndo_change_mtu		 = eth_change_mtu,
+	.ndo_validate_addr	 = eth_validate_addr,
+	.ndo_set_mac_address 	 = eth_mac_addr,
+	.ndo_do_ioctl		 = netdev_ioctl,
+	.ndo_tx_timeout 	 = rhine_tx_timeout,
+	.ndo_vlan_rx_add_vid	 = rhine_vlan_rx_add_vid,
+	.ndo_vlan_rx_kill_vid	 = rhine_vlan_rx_kill_vid,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller	 = rhine_poll,
+#endif
+};
+
+static int rhine_init_one_common(struct device *hwdev, u32 quirks,
+				 long pioaddr, void __iomem *ioaddr, int irq)
+{
+	struct net_device *dev;
+	struct rhine_private *rp;
+	int i, rc, phy_id;
+	const char *name;
+
+	/* this should always be supported */
+	rc = dma_set_mask(hwdev, DMA_BIT_MASK(32));
+	if (rc) {
+		dev_err(hwdev, "32-bit DMA addresses not supported by the card!?\n");
+		goto err_out;
+	}
+
+	dev = alloc_etherdev(sizeof(struct rhine_private));
+	if (!dev) {
+		rc = -ENOMEM;
+		goto err_out;
+	}
+	SET_NETDEV_DEV(dev, hwdev);
+
+	rp = netdev_priv(dev);
+	rp->dev = dev;
+	rp->quirks = quirks;
+	rp->pioaddr = pioaddr;
+	rp->base = ioaddr;
+	rp->irq = irq;
+	rp->msg_enable = netif_msg_init(debug, RHINE_MSG_DEFAULT);
+
+	phy_id = rp->quirks & rqIntPHY ? 1 : 0;
+
+	u64_stats_init(&rp->tx_stats.syncp);
+	u64_stats_init(&rp->rx_stats.syncp);
+
+	/* Get chip registers into a sane state */
+	rhine_power_init(dev);
+	rhine_hw_init(dev, pioaddr);
+
+	for (i = 0; i < 6; i++)
+		dev->dev_addr[i] = ioread8(ioaddr + StationAddr + i);
+
+	if (!is_valid_ether_addr(dev->dev_addr)) {
+		/* Report it and use a random ethernet address instead */
+		netdev_err(dev, "Invalid MAC address: %pM\n", dev->dev_addr);
+		eth_hw_addr_random(dev);
+		netdev_info(dev, "Using random MAC address: %pM\n",
+			    dev->dev_addr);
+	}
+
+	/* For Rhine-I/II, phy_id is loaded from EEPROM */
+	if (!phy_id)
+		phy_id = ioread8(ioaddr + 0x6C);
+
+	spin_lock_init(&rp->lock);
+	mutex_init(&rp->task_lock);
+	INIT_WORK(&rp->reset_task, rhine_reset_task);
+	INIT_WORK(&rp->slow_event_task, rhine_slow_event_task);
+
+	rp->mii_if.dev = dev;
+	rp->mii_if.mdio_read = mdio_read;
+	rp->mii_if.mdio_write = mdio_write;
+	rp->mii_if.phy_id_mask = 0x1f;
+	rp->mii_if.reg_num_mask = 0x1f;
+
+	/* The chip-specific entries in the device structure. */
+	dev->netdev_ops = &rhine_netdev_ops;
+	dev->ethtool_ops = &netdev_ethtool_ops;
+	dev->watchdog_timeo = TX_TIMEOUT;
+
+	netif_napi_add(dev, &rp->napi, rhine_napipoll, 64);
+
+	if (rp->quirks & rqRhineI)
+		dev->features |= NETIF_F_SG|NETIF_F_HW_CSUM;
+
+	if (rp->quirks & rqMgmt)
+		dev->features |= NETIF_F_HW_VLAN_CTAG_TX |
+				 NETIF_F_HW_VLAN_CTAG_RX |
+				 NETIF_F_HW_VLAN_CTAG_FILTER;
+
+	/* dev->name not defined before register_netdev()! */
+	rc = register_netdev(dev);
+	if (rc)
+		goto err_out_free_netdev;
+
+	if (rp->quirks & rqRhineI)
+		name = "Rhine";
+	else if (rp->quirks & rqStatusWBRace)
+		name = "Rhine II";
+	else if (rp->quirks & rqMgmt)
+		name = "Rhine III (Management Adapter)";
+	else
+		name = "Rhine III";
+
+	netdev_info(dev, "VIA %s at 0x%lx, %pM, IRQ %d\n",
+		    name, (long)ioaddr, dev->dev_addr, rp->irq);
+
+	dev_set_drvdata(hwdev, dev);
+
+	{
+		u16 mii_cmd;
+		int mii_status = mdio_read(dev, phy_id, 1);
+		mii_cmd = mdio_read(dev, phy_id, MII_BMCR) & ~BMCR_ISOLATE;
+		mdio_write(dev, phy_id, MII_BMCR, mii_cmd);
+		if (mii_status != 0xffff && mii_status != 0x0000) {
+			rp->mii_if.advertising = mdio_read(dev, phy_id, 4);
+			netdev_info(dev,
+				    "MII PHY found at address %d, status 0x%04x advertising %04x Link %04x\n",
+				    phy_id,
+				    mii_status, rp->mii_if.advertising,
+				    mdio_read(dev, phy_id, 5));
+
+			/* set IFF_RUNNING */
+			if (mii_status & BMSR_LSTATUS)
+				netif_carrier_on(dev);
+			else
+				netif_carrier_off(dev);
+
+		}
+	}
+	rp->mii_if.phy_id = phy_id;
+	if (avoid_D3)
+		netif_info(rp, probe, dev, "No D3 power state at shutdown\n");
+
+	return 0;
+
+err_out_free_netdev:
+	free_netdev(dev);
+err_out:
+	return rc;
+}
+
+static int rhine_init_one_pci(struct pci_dev *pdev,
+			      const struct pci_device_id *ent)
+{
+	struct device *hwdev = &pdev->dev;
+	int rc;
+	long pioaddr, memaddr;
+	void __iomem *ioaddr;
+	int io_size = pdev->revision < VTunknown0 ? 128 : 256;
+
+/* This driver was written to use PCI memory space. Some early versions
+ * of the Rhine may only work correctly with I/O space accesses.
+ * TODO: determine for which revisions this is true and assign the flag
+ *	 in code as opposed to this Kconfig option (???)
+ */
+#ifdef CONFIG_VIA_RHINE_MMIO
+	u32 quirks = rqNeedEnMMIO;
+#else
+	u32 quirks = 0;
+#endif
+
+/* when built into the kernel, we only print version if device is found */
+#ifndef MODULE
+	pr_info_once("%s\n", version);
+#endif
+
+	rc = pci_enable_device(pdev);
+	if (rc)
+		goto err_out;
+
+	if (pdev->revision < VTunknown0) {
+		quirks |= rqRhineI;
+	} else if (pdev->revision >= VT6102) {
+		quirks |= rqWOL | rqForceReset;
+		if (pdev->revision < VT6105) {
+			quirks |= rqStatusWBRace;
+		} else {
+			quirks |= rqIntPHY;
+			if (pdev->revision >= VT6105_B0)
+				quirks |= rq6patterns;
+			if (pdev->revision >= VT6105M)
+				quirks |= rqMgmt;
+		}
+	}
+
+	/* sanity check */
+	if ((pci_resource_len(pdev, 0) < io_size) ||
+	    (pci_resource_len(pdev, 1) < io_size)) {
+		rc = -EIO;
+		dev_err(hwdev, "Insufficient PCI resources, aborting\n");
+		goto err_out_pci_disable;
+	}
+
+	pioaddr = pci_resource_start(pdev, 0);
+	memaddr = pci_resource_start(pdev, 1);
+
+	pci_set_master(pdev);
+
+	rc = pci_request_regions(pdev, DRV_NAME);
+	if (rc)
+		goto err_out_pci_disable;
+
+	ioaddr = pci_iomap(pdev, (quirks & rqNeedEnMMIO ? 1 : 0), io_size);
+	if (!ioaddr) {
+		rc = -EIO;
+		dev_err(hwdev,
+			"ioremap failed for device %s, region 0x%X @ 0x%lX\n",
+			dev_name(hwdev), io_size, memaddr);
+		goto err_out_free_res;
+	}
+
+	enable_mmio(pioaddr, quirks);
+
+	rc = verify_mmio(hwdev, pioaddr, ioaddr, quirks);
+	if (rc)
+		goto err_out_unmap;
+
+	rc = rhine_init_one_common(&pdev->dev, quirks,
+				   pioaddr, ioaddr, pdev->irq);
+	if (!rc)
+		return 0;
+
+err_out_unmap:
+	pci_iounmap(pdev, ioaddr);
+err_out_free_res:
+	pci_release_regions(pdev);
+err_out_pci_disable:
+	pci_disable_device(pdev);
+err_out:
+	return rc;
+}
+
+static int rhine_init_one_platform(struct platform_device *pdev)
+{
+	const struct of_device_id *match;
+	const u32 *quirks;
+	int irq;
+	struct resource *res;
+	void __iomem *ioaddr;
+
+	match = of_match_device(rhine_of_tbl, &pdev->dev);
+	if (!match)
+		return -EINVAL;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	ioaddr = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(ioaddr))
+		return PTR_ERR(ioaddr);
+
+	irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
+	if (!irq)
+		return -EINVAL;
+
+	quirks = match->data;
+	if (!quirks)
+		return -EINVAL;
+
+	return rhine_init_one_common(&pdev->dev, *quirks,
+				     (long)ioaddr, ioaddr, irq);
+}
+
+static int alloc_ring(struct net_device* dev)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+	struct device *hwdev = dev->dev.parent;
+	void *ring;
+	dma_addr_t ring_dma;
+
+	ring = dma_alloc_coherent(hwdev,
+				  RX_RING_SIZE * sizeof(struct rx_desc) +
+				  TX_RING_SIZE * sizeof(struct tx_desc),
+				  &ring_dma,
+				  GFP_ATOMIC);
+	if (!ring) {
+		netdev_err(dev, "Could not allocate DMA memory\n");
+		return -ENOMEM;
+	}
+	if (rp->quirks & rqRhineI) {
+		rp->tx_bufs = dma_alloc_coherent(hwdev,
+						 PKT_BUF_SZ * TX_RING_SIZE,
+						 &rp->tx_bufs_dma,
+						 GFP_ATOMIC);
+		if (rp->tx_bufs == NULL) {
+			dma_free_coherent(hwdev,
+					  RX_RING_SIZE * sizeof(struct rx_desc) +
+					  TX_RING_SIZE * sizeof(struct tx_desc),
+					  ring, ring_dma);
+			return -ENOMEM;
+		}
+	}
+
+	rp->rx_ring = ring;
+	rp->tx_ring = ring + RX_RING_SIZE * sizeof(struct rx_desc);
+	rp->rx_ring_dma = ring_dma;
+	rp->tx_ring_dma = ring_dma + RX_RING_SIZE * sizeof(struct rx_desc);
+
+	return 0;
+}
+
+static void free_ring(struct net_device* dev)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+	struct device *hwdev = dev->dev.parent;
+
+	dma_free_coherent(hwdev,
+			  RX_RING_SIZE * sizeof(struct rx_desc) +
+			  TX_RING_SIZE * sizeof(struct tx_desc),
+			  rp->rx_ring, rp->rx_ring_dma);
+	rp->tx_ring = NULL;
+
+	if (rp->tx_bufs)
+		dma_free_coherent(hwdev, PKT_BUF_SZ * TX_RING_SIZE,
+				  rp->tx_bufs, rp->tx_bufs_dma);
+
+	rp->tx_bufs = NULL;
+
+}
+
+static void alloc_rbufs(struct net_device *dev)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+	struct device *hwdev = dev->dev.parent;
+	dma_addr_t next;
+	int i;
+
+	rp->dirty_rx = rp->cur_rx = 0;
+
+	rp->rx_buf_sz = (dev->mtu <= 1500 ? PKT_BUF_SZ : dev->mtu + 32);
+	rp->rx_head_desc = &rp->rx_ring[0];
+	next = rp->rx_ring_dma;
+
+	/* Init the ring entries */
+	for (i = 0; i < RX_RING_SIZE; i++) {
+		rp->rx_ring[i].rx_status = 0;
+		rp->rx_ring[i].desc_length = cpu_to_le32(rp->rx_buf_sz);
+		next += sizeof(struct rx_desc);
+		rp->rx_ring[i].next_desc = cpu_to_le32(next);
+		rp->rx_skbuff[i] = NULL;
+	}
+	/* Mark the last entry as wrapping the ring. */
+	rp->rx_ring[i-1].next_desc = cpu_to_le32(rp->rx_ring_dma);
+
+	/* Fill in the Rx buffers.  Handle allocation failure gracefully. */
+	for (i = 0; i < RX_RING_SIZE; i++) {
+		struct sk_buff *skb = netdev_alloc_skb(dev, rp->rx_buf_sz);
+		rp->rx_skbuff[i] = skb;
+		if (skb == NULL)
+			break;
+
+		rp->rx_skbuff_dma[i] =
+			dma_map_single(hwdev, skb->data, rp->rx_buf_sz,
+				       DMA_FROM_DEVICE);
+		if (dma_mapping_error(hwdev, rp->rx_skbuff_dma[i])) {
+			rp->rx_skbuff_dma[i] = 0;
+			dev_kfree_skb(skb);
+			break;
+		}
+		rp->rx_ring[i].addr = cpu_to_le32(rp->rx_skbuff_dma[i]);
+		rp->rx_ring[i].rx_status = cpu_to_le32(DescOwn);
+	}
+	rp->dirty_rx = (unsigned int)(i - RX_RING_SIZE);
+}
+
+static void free_rbufs(struct net_device* dev)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+	struct device *hwdev = dev->dev.parent;
+	int i;
+
+	/* Free all the skbuffs in the Rx queue. */
+	for (i = 0; i < RX_RING_SIZE; i++) {
+		rp->rx_ring[i].rx_status = 0;
+		rp->rx_ring[i].addr = cpu_to_le32(0xBADF00D0); /* An invalid address. */
+		if (rp->rx_skbuff[i]) {
+			dma_unmap_single(hwdev,
+					 rp->rx_skbuff_dma[i],
+					 rp->rx_buf_sz, DMA_FROM_DEVICE);
+			dev_kfree_skb(rp->rx_skbuff[i]);
+		}
+		rp->rx_skbuff[i] = NULL;
+	}
+}
+
+static void alloc_tbufs(struct net_device* dev)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+	dma_addr_t next;
+	int i;
+
+	rp->dirty_tx = rp->cur_tx = 0;
+	next = rp->tx_ring_dma;
+	for (i = 0; i < TX_RING_SIZE; i++) {
+		rp->tx_skbuff[i] = NULL;
+		rp->tx_ring[i].tx_status = 0;
+		rp->tx_ring[i].desc_length = cpu_to_le32(TXDESC);
+		next += sizeof(struct tx_desc);
+		rp->tx_ring[i].next_desc = cpu_to_le32(next);
+		if (rp->quirks & rqRhineI)
+			rp->tx_buf[i] = &rp->tx_bufs[i * PKT_BUF_SZ];
+	}
+	rp->tx_ring[i-1].next_desc = cpu_to_le32(rp->tx_ring_dma);
+
+	netdev_reset_queue(dev);
+}
+
+static void free_tbufs(struct net_device* dev)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+	struct device *hwdev = dev->dev.parent;
+	int i;
+
+	for (i = 0; i < TX_RING_SIZE; i++) {
+		rp->tx_ring[i].tx_status = 0;
+		rp->tx_ring[i].desc_length = cpu_to_le32(TXDESC);
+		rp->tx_ring[i].addr = cpu_to_le32(0xBADF00D0); /* An invalid address. */
+		if (rp->tx_skbuff[i]) {
+			if (rp->tx_skbuff_dma[i]) {
+				dma_unmap_single(hwdev,
+						 rp->tx_skbuff_dma[i],
+						 rp->tx_skbuff[i]->len,
+						 DMA_TO_DEVICE);
+			}
+			dev_kfree_skb(rp->tx_skbuff[i]);
+		}
+		rp->tx_skbuff[i] = NULL;
+		rp->tx_buf[i] = NULL;
+	}
+}
+
+static void rhine_check_media(struct net_device *dev, unsigned int init_media)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+	void __iomem *ioaddr = rp->base;
+
+	if (!rp->mii_if.force_media)
+		mii_check_media(&rp->mii_if, netif_msg_link(rp), init_media);
+
+	if (rp->mii_if.full_duplex)
+	    iowrite8(ioread8(ioaddr + ChipCmd1) | Cmd1FDuplex,
+		   ioaddr + ChipCmd1);
+	else
+	    iowrite8(ioread8(ioaddr + ChipCmd1) & ~Cmd1FDuplex,
+		   ioaddr + ChipCmd1);
+
+	netif_info(rp, link, dev, "force_media %d, carrier %d\n",
+		   rp->mii_if.force_media, netif_carrier_ok(dev));
+}
+
+/* Called after status of force_media possibly changed */
+static void rhine_set_carrier(struct mii_if_info *mii)
+{
+	struct net_device *dev = mii->dev;
+	struct rhine_private *rp = netdev_priv(dev);
+
+	if (mii->force_media) {
+		/* autoneg is off: Link is always assumed to be up */
+		if (!netif_carrier_ok(dev))
+			netif_carrier_on(dev);
+	}
+
+	rhine_check_media(dev, 0);
+
+	netif_info(rp, link, dev, "force_media %d, carrier %d\n",
+		   mii->force_media, netif_carrier_ok(dev));
+}
+
+/**
+ * rhine_set_cam - set CAM multicast filters
+ * @ioaddr: register block of this Rhine
+ * @idx: multicast CAM index [0..MCAM_SIZE-1]
+ * @addr: multicast address (6 bytes)
+ *
+ * Load addresses into multicast filters.
+ */
+static void rhine_set_cam(void __iomem *ioaddr, int idx, u8 *addr)
+{
+	int i;
+
+	iowrite8(CAMC_CAMEN, ioaddr + CamCon);
+	wmb();
+
+	/* Paranoid -- idx out of range should never happen */
+	idx &= (MCAM_SIZE - 1);
+
+	iowrite8((u8) idx, ioaddr + CamAddr);
+
+	for (i = 0; i < 6; i++, addr++)
+		iowrite8(*addr, ioaddr + MulticastFilter0 + i);
+	udelay(10);
+	wmb();
+
+	iowrite8(CAMC_CAMWR | CAMC_CAMEN, ioaddr + CamCon);
+	udelay(10);
+
+	iowrite8(0, ioaddr + CamCon);
+}
+
+/**
+ * rhine_set_vlan_cam - set CAM VLAN filters
+ * @ioaddr: register block of this Rhine
+ * @idx: VLAN CAM index [0..VCAM_SIZE-1]
+ * @addr: VLAN ID (2 bytes)
+ *
+ * Load addresses into VLAN filters.
+ */
+static void rhine_set_vlan_cam(void __iomem *ioaddr, int idx, u8 *addr)
+{
+	iowrite8(CAMC_CAMEN | CAMC_VCAMSL, ioaddr + CamCon);
+	wmb();
+
+	/* Paranoid -- idx out of range should never happen */
+	idx &= (VCAM_SIZE - 1);
+
+	iowrite8((u8) idx, ioaddr + CamAddr);
+
+	iowrite16(*((u16 *) addr), ioaddr + MulticastFilter0 + 6);
+	udelay(10);
+	wmb();
+
+	iowrite8(CAMC_CAMWR | CAMC_CAMEN, ioaddr + CamCon);
+	udelay(10);
+
+	iowrite8(0, ioaddr + CamCon);
+}
+
+/**
+ * rhine_set_cam_mask - set multicast CAM mask
+ * @ioaddr: register block of this Rhine
+ * @mask: multicast CAM mask
+ *
+ * Mask sets multicast filters active/inactive.
+ */
+static void rhine_set_cam_mask(void __iomem *ioaddr, u32 mask)
+{
+	iowrite8(CAMC_CAMEN, ioaddr + CamCon);
+	wmb();
+
+	/* write mask */
+	iowrite32(mask, ioaddr + CamMask);
+
+	/* disable CAMEN */
+	iowrite8(0, ioaddr + CamCon);
+}
+
+/**
+ * rhine_set_vlan_cam_mask - set VLAN CAM mask
+ * @ioaddr: register block of this Rhine
+ * @mask: VLAN CAM mask
+ *
+ * Mask sets VLAN filters active/inactive.
+ */
+static void rhine_set_vlan_cam_mask(void __iomem *ioaddr, u32 mask)
+{
+	iowrite8(CAMC_CAMEN | CAMC_VCAMSL, ioaddr + CamCon);
+	wmb();
+
+	/* write mask */
+	iowrite32(mask, ioaddr + CamMask);
+
+	/* disable CAMEN */
+	iowrite8(0, ioaddr + CamCon);
+}
+
+/**
+ * rhine_init_cam_filter - initialize CAM filters
+ * @dev: network device
+ *
+ * Initialize (disable) hardware VLAN and multicast support on this
+ * Rhine.
+ */
+static void rhine_init_cam_filter(struct net_device *dev)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+	void __iomem *ioaddr = rp->base;
+
+	/* Disable all CAMs */
+	rhine_set_vlan_cam_mask(ioaddr, 0);
+	rhine_set_cam_mask(ioaddr, 0);
+
+	/* disable hardware VLAN support */
+	BYTE_REG_BITS_ON(TCR_PQEN, ioaddr + TxConfig);
+	BYTE_REG_BITS_OFF(BCR1_VIDFR, ioaddr + PCIBusConfig1);
+}
+
+/**
+ * rhine_update_vcam - update VLAN CAM filters
+ * @rp: rhine_private data of this Rhine
+ *
+ * Update VLAN CAM filters to match configuration change.
+ */
+static void rhine_update_vcam(struct net_device *dev)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+	void __iomem *ioaddr = rp->base;
+	u16 vid;
+	u32 vCAMmask = 0;	/* 32 vCAMs (6105M and better) */
+	unsigned int i = 0;
+
+	for_each_set_bit(vid, rp->active_vlans, VLAN_N_VID) {
+		rhine_set_vlan_cam(ioaddr, i, (u8 *)&vid);
+		vCAMmask |= 1 << i;
+		if (++i >= VCAM_SIZE)
+			break;
+	}
+	rhine_set_vlan_cam_mask(ioaddr, vCAMmask);
+}
+
+static int rhine_vlan_rx_add_vid(struct net_device *dev, __be16 proto, u16 vid)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+
+	spin_lock_bh(&rp->lock);
+	set_bit(vid, rp->active_vlans);
+	rhine_update_vcam(dev);
+	spin_unlock_bh(&rp->lock);
+	return 0;
+}
+
+static int rhine_vlan_rx_kill_vid(struct net_device *dev, __be16 proto, u16 vid)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+
+	spin_lock_bh(&rp->lock);
+	clear_bit(vid, rp->active_vlans);
+	rhine_update_vcam(dev);
+	spin_unlock_bh(&rp->lock);
+	return 0;
+}
+
+static void init_registers(struct net_device *dev)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+	void __iomem *ioaddr = rp->base;
+	int i;
+
+	for (i = 0; i < 6; i++)
+		iowrite8(dev->dev_addr[i], ioaddr + StationAddr + i);
+
+	/* Initialize other registers. */
+	iowrite16(0x0006, ioaddr + PCIBusConfig);	/* Tune configuration??? */
+	/* Configure initial FIFO thresholds. */
+	iowrite8(0x20, ioaddr + TxConfig);
+	rp->tx_thresh = 0x20;
+	rp->rx_thresh = 0x60;		/* Written in rhine_set_rx_mode(). */
+
+	iowrite32(rp->rx_ring_dma, ioaddr + RxRingPtr);
+	iowrite32(rp->tx_ring_dma, ioaddr + TxRingPtr);
+
+	rhine_set_rx_mode(dev);
+
+	if (rp->quirks & rqMgmt)
+		rhine_init_cam_filter(dev);
+
+	napi_enable(&rp->napi);
+
+	iowrite16(RHINE_EVENT & 0xffff, ioaddr + IntrEnable);
+
+	iowrite16(CmdStart | CmdTxOn | CmdRxOn | (Cmd1NoTxPoll << 8),
+	       ioaddr + ChipCmd);
+	rhine_check_media(dev, 1);
+}
+
+/* Enable MII link status auto-polling (required for IntrLinkChange) */
+static void rhine_enable_linkmon(struct rhine_private *rp)
+{
+	void __iomem *ioaddr = rp->base;
+
+	iowrite8(0, ioaddr + MIICmd);
+	iowrite8(MII_BMSR, ioaddr + MIIRegAddr);
+	iowrite8(0x80, ioaddr + MIICmd);
+
+	rhine_wait_bit_high(rp, MIIRegAddr, 0x20);
+
+	iowrite8(MII_BMSR | 0x40, ioaddr + MIIRegAddr);
+}
+
+/* Disable MII link status auto-polling (required for MDIO access) */
+static void rhine_disable_linkmon(struct rhine_private *rp)
+{
+	void __iomem *ioaddr = rp->base;
+
+	iowrite8(0, ioaddr + MIICmd);
+
+	if (rp->quirks & rqRhineI) {
+		iowrite8(0x01, ioaddr + MIIRegAddr);	// MII_BMSR
+
+		/* Can be called from ISR. Evil. */
+		mdelay(1);
+
+		/* 0x80 must be set immediately before turning it off */
+		iowrite8(0x80, ioaddr + MIICmd);
+
+		rhine_wait_bit_high(rp, MIIRegAddr, 0x20);
+
+		/* Heh. Now clear 0x80 again. */
+		iowrite8(0, ioaddr + MIICmd);
+	}
+	else
+		rhine_wait_bit_high(rp, MIIRegAddr, 0x80);
+}
+
+/* Read and write over the MII Management Data I/O (MDIO) interface. */
+
+static int mdio_read(struct net_device *dev, int phy_id, int regnum)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+	void __iomem *ioaddr = rp->base;
+	int result;
+
+	rhine_disable_linkmon(rp);
+
+	/* rhine_disable_linkmon already cleared MIICmd */
+	iowrite8(phy_id, ioaddr + MIIPhyAddr);
+	iowrite8(regnum, ioaddr + MIIRegAddr);
+	iowrite8(0x40, ioaddr + MIICmd);		/* Trigger read */
+	rhine_wait_bit_low(rp, MIICmd, 0x40);
+	result = ioread16(ioaddr + MIIData);
+
+	rhine_enable_linkmon(rp);
+	return result;
+}
+
+static void mdio_write(struct net_device *dev, int phy_id, int regnum, int value)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+	void __iomem *ioaddr = rp->base;
+
+	rhine_disable_linkmon(rp);
+
+	/* rhine_disable_linkmon already cleared MIICmd */
+	iowrite8(phy_id, ioaddr + MIIPhyAddr);
+	iowrite8(regnum, ioaddr + MIIRegAddr);
+	iowrite16(value, ioaddr + MIIData);
+	iowrite8(0x20, ioaddr + MIICmd);		/* Trigger write */
+	rhine_wait_bit_low(rp, MIICmd, 0x20);
+
+	rhine_enable_linkmon(rp);
+}
+
+static void rhine_task_disable(struct rhine_private *rp)
+{
+	mutex_lock(&rp->task_lock);
+	rp->task_enable = false;
+	mutex_unlock(&rp->task_lock);
+
+	cancel_work_sync(&rp->slow_event_task);
+	cancel_work_sync(&rp->reset_task);
+}
+
+static void rhine_task_enable(struct rhine_private *rp)
+{
+	mutex_lock(&rp->task_lock);
+	rp->task_enable = true;
+	mutex_unlock(&rp->task_lock);
+}
+
+static int rhine_open(struct net_device *dev)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+	void __iomem *ioaddr = rp->base;
+	int rc;
+
+	rc = request_irq(rp->irq, rhine_interrupt, IRQF_SHARED, dev->name, dev);
+	if (rc)
+		return rc;
+
+	netif_dbg(rp, ifup, dev, "%s() irq %d\n", __func__, rp->irq);
+
+	rc = alloc_ring(dev);
+	if (rc) {
+		free_irq(rp->irq, dev);
+		return rc;
+	}
+	alloc_rbufs(dev);
+	alloc_tbufs(dev);
+	rhine_chip_reset(dev);
+	rhine_task_enable(rp);
+	init_registers(dev);
+
+	netif_dbg(rp, ifup, dev, "%s() Done - status %04x MII status: %04x\n",
+		  __func__, ioread16(ioaddr + ChipCmd),
+		  mdio_read(dev, rp->mii_if.phy_id, MII_BMSR));
+
+	netif_start_queue(dev);
+
+	return 0;
+}
+
+static void rhine_reset_task(struct work_struct *work)
+{
+	struct rhine_private *rp = container_of(work, struct rhine_private,
+						reset_task);
+	struct net_device *dev = rp->dev;
+
+	mutex_lock(&rp->task_lock);
+
+	if (!rp->task_enable)
+		goto out_unlock;
+
+	napi_disable(&rp->napi);
+	netif_tx_disable(dev);
+	spin_lock_bh(&rp->lock);
+
+	/* clear all descriptors */
+	free_tbufs(dev);
+	free_rbufs(dev);
+	alloc_tbufs(dev);
+	alloc_rbufs(dev);
+
+	/* Reinitialize the hardware. */
+	rhine_chip_reset(dev);
+	init_registers(dev);
+
+	spin_unlock_bh(&rp->lock);
+
+	dev->trans_start = jiffies; /* prevent tx timeout */
+	dev->stats.tx_errors++;
+	netif_wake_queue(dev);
+
+out_unlock:
+	mutex_unlock(&rp->task_lock);
+}
+
+static void rhine_tx_timeout(struct net_device *dev)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+	void __iomem *ioaddr = rp->base;
+
+	netdev_warn(dev, "Transmit timed out, status %04x, PHY status %04x, resetting...\n",
+		    ioread16(ioaddr + IntrStatus),
+		    mdio_read(dev, rp->mii_if.phy_id, MII_BMSR));
+
+	schedule_work(&rp->reset_task);
+}
+
+static netdev_tx_t rhine_start_tx(struct sk_buff *skb,
+				  struct net_device *dev)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+	struct device *hwdev = dev->dev.parent;
+	void __iomem *ioaddr = rp->base;
+	unsigned entry;
+
+	/* Caution: the write order is important here, set the field
+	   with the "ownership" bits last. */
+
+	/* Calculate the next Tx descriptor entry. */
+	entry = rp->cur_tx % TX_RING_SIZE;
+
+	if (skb_padto(skb, ETH_ZLEN))
+		return NETDEV_TX_OK;
+
+	rp->tx_skbuff[entry] = skb;
+
+	if ((rp->quirks & rqRhineI) &&
+	    (((unsigned long)skb->data & 3) || skb_shinfo(skb)->nr_frags != 0 || skb->ip_summed == CHECKSUM_PARTIAL)) {
+		/* Must use alignment buffer. */
+		if (skb->len > PKT_BUF_SZ) {
+			/* packet too long, drop it */
+			dev_kfree_skb_any(skb);
+			rp->tx_skbuff[entry] = NULL;
+			dev->stats.tx_dropped++;
+			return NETDEV_TX_OK;
+		}
+
+		/* Padding is not copied and so must be redone. */
+		skb_copy_and_csum_dev(skb, rp->tx_buf[entry]);
+		if (skb->len < ETH_ZLEN)
+			memset(rp->tx_buf[entry] + skb->len, 0,
+			       ETH_ZLEN - skb->len);
+		rp->tx_skbuff_dma[entry] = 0;
+		rp->tx_ring[entry].addr = cpu_to_le32(rp->tx_bufs_dma +
+						      (rp->tx_buf[entry] -
+						       rp->tx_bufs));
+	} else {
+		rp->tx_skbuff_dma[entry] =
+			dma_map_single(hwdev, skb->data, skb->len,
+				       DMA_TO_DEVICE);
+		if (dma_mapping_error(hwdev, rp->tx_skbuff_dma[entry])) {
+			dev_kfree_skb_any(skb);
+			rp->tx_skbuff_dma[entry] = 0;
+			dev->stats.tx_dropped++;
+			return NETDEV_TX_OK;
+		}
+		rp->tx_ring[entry].addr = cpu_to_le32(rp->tx_skbuff_dma[entry]);
+	}
+
+	rp->tx_ring[entry].desc_length =
+		cpu_to_le32(TXDESC | (skb->len >= ETH_ZLEN ? skb->len : ETH_ZLEN));
+
+	if (unlikely(skb_vlan_tag_present(skb))) {
+		u16 vid_pcp = skb_vlan_tag_get(skb);
+
+		/* drop CFI/DEI bit, register needs VID and PCP */
+		vid_pcp = (vid_pcp & VLAN_VID_MASK) |
+			  ((vid_pcp & VLAN_PRIO_MASK) >> 1);
+		rp->tx_ring[entry].tx_status = cpu_to_le32((vid_pcp) << 16);
+		/* request tagging */
+		rp->tx_ring[entry].desc_length |= cpu_to_le32(0x020000);
+	}
+	else
+		rp->tx_ring[entry].tx_status = 0;
+
+	netdev_sent_queue(dev, skb->len);
+	/* lock eth irq */
+	wmb();
+	rp->tx_ring[entry].tx_status |= cpu_to_le32(DescOwn);
+	wmb();
+
+	rp->cur_tx++;
+
+	/* Non-x86 Todo: explicitly flush cache lines here. */
+
+	if (skb_vlan_tag_present(skb))
+		/* Tx queues are bits 7-0 (first Tx queue: bit 7) */
+		BYTE_REG_BITS_ON(1 << 7, ioaddr + TQWake);
+
+	/* Wake the potentially-idle transmit channel */
+	iowrite8(ioread8(ioaddr + ChipCmd1) | Cmd1TxDemand,
+	       ioaddr + ChipCmd1);
+	IOSYNC;
+
+	if (rp->cur_tx == rp->dirty_tx + TX_QUEUE_LEN)
+		netif_stop_queue(dev);
+
+	netif_dbg(rp, tx_queued, dev, "Transmit frame #%d queued in slot %d\n",
+		  rp->cur_tx - 1, entry);
+
+	return NETDEV_TX_OK;
+}
+
+static void rhine_irq_disable(struct rhine_private *rp)
+{
+	iowrite16(0x0000, rp->base + IntrEnable);
+	mmiowb();
+}
+
+/* The interrupt handler does all of the Rx thread work and cleans up
+   after the Tx thread. */
+static irqreturn_t rhine_interrupt(int irq, void *dev_instance)
+{
+	struct net_device *dev = dev_instance;
+	struct rhine_private *rp = netdev_priv(dev);
+	u32 status;
+	int handled = 0;
+
+	status = rhine_get_events(rp);
+
+	netif_dbg(rp, intr, dev, "Interrupt, status %08x\n", status);
+
+	if (status & RHINE_EVENT) {
+		handled = 1;
+
+		rhine_irq_disable(rp);
+		napi_schedule(&rp->napi);
+	}
+
+	if (status & ~(IntrLinkChange | IntrStatsMax | RHINE_EVENT_NAPI)) {
+		netif_err(rp, intr, dev, "Something Wicked happened! %08x\n",
+			  status);
+	}
+
+	return IRQ_RETVAL(handled);
+}
+
+/* This routine is logically part of the interrupt handler, but isolated
+   for clarity. */
+static void rhine_tx(struct net_device *dev)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+	struct device *hwdev = dev->dev.parent;
+	int txstatus = 0, entry = rp->dirty_tx % TX_RING_SIZE;
+	unsigned int pkts_compl = 0, bytes_compl = 0;
+	struct sk_buff *skb;
+
+	/* find and cleanup dirty tx descriptors */
+	while (rp->dirty_tx != rp->cur_tx) {
+		txstatus = le32_to_cpu(rp->tx_ring[entry].tx_status);
+		netif_dbg(rp, tx_done, dev, "Tx scavenge %d status %08x\n",
+			  entry, txstatus);
+		if (txstatus & DescOwn)
+			break;
+		skb = rp->tx_skbuff[entry];
+		if (txstatus & 0x8000) {
+			netif_dbg(rp, tx_done, dev,
+				  "Transmit error, Tx status %08x\n", txstatus);
+			dev->stats.tx_errors++;
+			if (txstatus & 0x0400)
+				dev->stats.tx_carrier_errors++;
+			if (txstatus & 0x0200)
+				dev->stats.tx_window_errors++;
+			if (txstatus & 0x0100)
+				dev->stats.tx_aborted_errors++;
+			if (txstatus & 0x0080)
+				dev->stats.tx_heartbeat_errors++;
+			if (((rp->quirks & rqRhineI) && txstatus & 0x0002) ||
+			    (txstatus & 0x0800) || (txstatus & 0x1000)) {
+				dev->stats.tx_fifo_errors++;
+				rp->tx_ring[entry].tx_status = cpu_to_le32(DescOwn);
+				break; /* Keep the skb - we try again */
+			}
+			/* Transmitter restarted in 'abnormal' handler. */
+		} else {
+			if (rp->quirks & rqRhineI)
+				dev->stats.collisions += (txstatus >> 3) & 0x0F;
+			else
+				dev->stats.collisions += txstatus & 0x0F;
+			netif_dbg(rp, tx_done, dev, "collisions: %1.1x:%1.1x\n",
+				  (txstatus >> 3) & 0xF, txstatus & 0xF);
+
+			u64_stats_update_begin(&rp->tx_stats.syncp);
+			rp->tx_stats.bytes += skb->len;
+			rp->tx_stats.packets++;
+			u64_stats_update_end(&rp->tx_stats.syncp);
+		}
+		/* Free the original skb. */
+		if (rp->tx_skbuff_dma[entry]) {
+			dma_unmap_single(hwdev,
+					 rp->tx_skbuff_dma[entry],
+					 skb->len,
+					 DMA_TO_DEVICE);
+		}
+		bytes_compl += skb->len;
+		pkts_compl++;
+		dev_consume_skb_any(skb);
+		rp->tx_skbuff[entry] = NULL;
+		entry = (++rp->dirty_tx) % TX_RING_SIZE;
+	}
+
+	netdev_completed_queue(dev, pkts_compl, bytes_compl);
+	if ((rp->cur_tx - rp->dirty_tx) < TX_QUEUE_LEN - 4)
+		netif_wake_queue(dev);
+}
+
+/**
+ * rhine_get_vlan_tci - extract TCI from Rx data buffer
+ * @skb: pointer to sk_buff
+ * @data_size: used data area of the buffer including CRC
+ *
+ * If hardware VLAN tag extraction is enabled and the chip indicates a 802.1Q
+ * packet, the extracted 802.1Q header (2 bytes TPID + 2 bytes TCI) is 4-byte
+ * aligned following the CRC.
+ */
+static inline u16 rhine_get_vlan_tci(struct sk_buff *skb, int data_size)
+{
+	u8 *trailer = (u8 *)skb->data + ((data_size + 3) & ~3) + 2;
+	return be16_to_cpup((__be16 *)trailer);
+}
+
+/* Process up to limit frames from receive ring */
+static int rhine_rx(struct net_device *dev, int limit)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+	struct device *hwdev = dev->dev.parent;
+	int count;
+	int entry = rp->cur_rx % RX_RING_SIZE;
+
+	netif_dbg(rp, rx_status, dev, "%s(), entry %d status %08x\n", __func__,
+		  entry, le32_to_cpu(rp->rx_head_desc->rx_status));
+
+	/* If EOP is set on the next entry, it's a new packet. Send it up. */
+	for (count = 0; count < limit; ++count) {
+		struct rx_desc *desc = rp->rx_head_desc;
+		u32 desc_status = le32_to_cpu(desc->rx_status);
+		u32 desc_length = le32_to_cpu(desc->desc_length);
+		int data_size = desc_status >> 16;
+
+		if (desc_status & DescOwn)
+			break;
+
+		netif_dbg(rp, rx_status, dev, "%s() status %08x\n", __func__,
+			  desc_status);
+
+		if ((desc_status & (RxWholePkt | RxErr)) != RxWholePkt) {
+			if ((desc_status & RxWholePkt) != RxWholePkt) {
+				netdev_warn(dev,
+	"Oversized Ethernet frame spanned multiple buffers, "
+	"entry %#x length %d status %08x!\n",
+					    entry, data_size,
+					    desc_status);
+				netdev_warn(dev,
+					    "Oversized Ethernet frame %p vs %p\n",
+					    rp->rx_head_desc,
+					    &rp->rx_ring[entry]);
+				dev->stats.rx_length_errors++;
+			} else if (desc_status & RxErr) {
+				/* There was a error. */
+				netif_dbg(rp, rx_err, dev,
+					  "%s() Rx error %08x\n", __func__,
+					  desc_status);
+				dev->stats.rx_errors++;
+				if (desc_status & 0x0030)
+					dev->stats.rx_length_errors++;
+				if (desc_status & 0x0048)
+					dev->stats.rx_fifo_errors++;
+				if (desc_status & 0x0004)
+					dev->stats.rx_frame_errors++;
+				if (desc_status & 0x0002) {
+					/* this can also be updated outside the interrupt handler */
+					spin_lock(&rp->lock);
+					dev->stats.rx_crc_errors++;
+					spin_unlock(&rp->lock);
+				}
+			}
+		} else {
+			struct sk_buff *skb = NULL;
+			/* Length should omit the CRC */
+			int pkt_len = data_size - 4;
+			u16 vlan_tci = 0;
+
+			/* Check if the packet is long enough to accept without
+			   copying to a minimally-sized skbuff. */
+			if (pkt_len < rx_copybreak)
+				skb = netdev_alloc_skb_ip_align(dev, pkt_len);
+			if (skb) {
+				dma_sync_single_for_cpu(hwdev,
+							rp->rx_skbuff_dma[entry],
+							rp->rx_buf_sz,
+							DMA_FROM_DEVICE);
+
+				skb_copy_to_linear_data(skb,
+						 rp->rx_skbuff[entry]->data,
+						 pkt_len);
+				skb_put(skb, pkt_len);
+				dma_sync_single_for_device(hwdev,
+							   rp->rx_skbuff_dma[entry],
+							   rp->rx_buf_sz,
+							   DMA_FROM_DEVICE);
+			} else {
+				skb = rp->rx_skbuff[entry];
+				if (skb == NULL) {
+					netdev_err(dev, "Inconsistent Rx descriptor chain\n");
+					break;
+				}
+				rp->rx_skbuff[entry] = NULL;
+				skb_put(skb, pkt_len);
+				dma_unmap_single(hwdev,
+						 rp->rx_skbuff_dma[entry],
+						 rp->rx_buf_sz,
+						 DMA_FROM_DEVICE);
+			}
+
+			if (unlikely(desc_length & DescTag))
+				vlan_tci = rhine_get_vlan_tci(skb, data_size);
+
+			skb->protocol = eth_type_trans(skb, dev);
+
+			if (unlikely(desc_length & DescTag))
+				__vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlan_tci);
+			netif_receive_skb(skb);
+
+			u64_stats_update_begin(&rp->rx_stats.syncp);
+			rp->rx_stats.bytes += pkt_len;
+			rp->rx_stats.packets++;
+			u64_stats_update_end(&rp->rx_stats.syncp);
+		}
+		entry = (++rp->cur_rx) % RX_RING_SIZE;
+		rp->rx_head_desc = &rp->rx_ring[entry];
+	}
+
+	/* Refill the Rx ring buffers. */
+	for (; rp->cur_rx - rp->dirty_rx > 0; rp->dirty_rx++) {
+		struct sk_buff *skb;
+		entry = rp->dirty_rx % RX_RING_SIZE;
+		if (rp->rx_skbuff[entry] == NULL) {
+			skb = netdev_alloc_skb(dev, rp->rx_buf_sz);
+			rp->rx_skbuff[entry] = skb;
+			if (skb == NULL)
+				break;	/* Better luck next round. */
+			rp->rx_skbuff_dma[entry] =
+				dma_map_single(hwdev, skb->data,
+					       rp->rx_buf_sz,
+					       DMA_FROM_DEVICE);
+			if (dma_mapping_error(hwdev,
+					      rp->rx_skbuff_dma[entry])) {
+				dev_kfree_skb(skb);
+				rp->rx_skbuff_dma[entry] = 0;
+				break;
+			}
+			rp->rx_ring[entry].addr = cpu_to_le32(rp->rx_skbuff_dma[entry]);
+		}
+		rp->rx_ring[entry].rx_status = cpu_to_le32(DescOwn);
+	}
+
+	return count;
+}
+
+static void rhine_restart_tx(struct net_device *dev) {
+	struct rhine_private *rp = netdev_priv(dev);
+	void __iomem *ioaddr = rp->base;
+	int entry = rp->dirty_tx % TX_RING_SIZE;
+	u32 intr_status;
+
+	/*
+	 * If new errors occurred, we need to sort them out before doing Tx.
+	 * In that case the ISR will be back here RSN anyway.
+	 */
+	intr_status = rhine_get_events(rp);
+
+	if ((intr_status & IntrTxErrSummary) == 0) {
+
+		/* We know better than the chip where it should continue. */
+		iowrite32(rp->tx_ring_dma + entry * sizeof(struct tx_desc),
+		       ioaddr + TxRingPtr);
+
+		iowrite8(ioread8(ioaddr + ChipCmd) | CmdTxOn,
+		       ioaddr + ChipCmd);
+
+		if (rp->tx_ring[entry].desc_length & cpu_to_le32(0x020000))
+			/* Tx queues are bits 7-0 (first Tx queue: bit 7) */
+			BYTE_REG_BITS_ON(1 << 7, ioaddr + TQWake);
+
+		iowrite8(ioread8(ioaddr + ChipCmd1) | Cmd1TxDemand,
+		       ioaddr + ChipCmd1);
+		IOSYNC;
+	}
+	else {
+		/* This should never happen */
+		netif_warn(rp, tx_err, dev, "another error occurred %08x\n",
+			   intr_status);
+	}
+
+}
+
+static void rhine_slow_event_task(struct work_struct *work)
+{
+	struct rhine_private *rp =
+		container_of(work, struct rhine_private, slow_event_task);
+	struct net_device *dev = rp->dev;
+	u32 intr_status;
+
+	mutex_lock(&rp->task_lock);
+
+	if (!rp->task_enable)
+		goto out_unlock;
+
+	intr_status = rhine_get_events(rp);
+	rhine_ack_events(rp, intr_status & RHINE_EVENT_SLOW);
+
+	if (intr_status & IntrLinkChange)
+		rhine_check_media(dev, 0);
+
+	if (intr_status & IntrPCIErr)
+		netif_warn(rp, hw, dev, "PCI error\n");
+
+	iowrite16(RHINE_EVENT & 0xffff, rp->base + IntrEnable);
+
+out_unlock:
+	mutex_unlock(&rp->task_lock);
+}
+
+static struct rtnl_link_stats64 *
+rhine_get_stats64(struct net_device *dev, struct rtnl_link_stats64 *stats)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+	unsigned int start;
+
+	spin_lock_bh(&rp->lock);
+	rhine_update_rx_crc_and_missed_errord(rp);
+	spin_unlock_bh(&rp->lock);
+
+	netdev_stats_to_stats64(stats, &dev->stats);
+
+	do {
+		start = u64_stats_fetch_begin_irq(&rp->rx_stats.syncp);
+		stats->rx_packets = rp->rx_stats.packets;
+		stats->rx_bytes = rp->rx_stats.bytes;
+	} while (u64_stats_fetch_retry_irq(&rp->rx_stats.syncp, start));
+
+	do {
+		start = u64_stats_fetch_begin_irq(&rp->tx_stats.syncp);
+		stats->tx_packets = rp->tx_stats.packets;
+		stats->tx_bytes = rp->tx_stats.bytes;
+	} while (u64_stats_fetch_retry_irq(&rp->tx_stats.syncp, start));
+
+	return stats;
+}
+
+static void rhine_set_rx_mode(struct net_device *dev)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+	void __iomem *ioaddr = rp->base;
+	u32 mc_filter[2];	/* Multicast hash filter */
+	u8 rx_mode = 0x0C;	/* Note: 0x02=accept runt, 0x01=accept errs */
+	struct netdev_hw_addr *ha;
+
+	if (dev->flags & IFF_PROMISC) {		/* Set promiscuous. */
+		rx_mode = 0x1C;
+		iowrite32(0xffffffff, ioaddr + MulticastFilter0);
+		iowrite32(0xffffffff, ioaddr + MulticastFilter1);
+	} else if ((netdev_mc_count(dev) > multicast_filter_limit) ||
+		   (dev->flags & IFF_ALLMULTI)) {
+		/* Too many to match, or accept all multicasts. */
+		iowrite32(0xffffffff, ioaddr + MulticastFilter0);
+		iowrite32(0xffffffff, ioaddr + MulticastFilter1);
+	} else if (rp->quirks & rqMgmt) {
+		int i = 0;
+		u32 mCAMmask = 0;	/* 32 mCAMs (6105M and better) */
+		netdev_for_each_mc_addr(ha, dev) {
+			if (i == MCAM_SIZE)
+				break;
+			rhine_set_cam(ioaddr, i, ha->addr);
+			mCAMmask |= 1 << i;
+			i++;
+		}
+		rhine_set_cam_mask(ioaddr, mCAMmask);
+	} else {
+		memset(mc_filter, 0, sizeof(mc_filter));
+		netdev_for_each_mc_addr(ha, dev) {
+			int bit_nr = ether_crc(ETH_ALEN, ha->addr) >> 26;
+
+			mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
+		}
+		iowrite32(mc_filter[0], ioaddr + MulticastFilter0);
+		iowrite32(mc_filter[1], ioaddr + MulticastFilter1);
+	}
+	/* enable/disable VLAN receive filtering */
+	if (rp->quirks & rqMgmt) {
+		if (dev->flags & IFF_PROMISC)
+			BYTE_REG_BITS_OFF(BCR1_VIDFR, ioaddr + PCIBusConfig1);
+		else
+			BYTE_REG_BITS_ON(BCR1_VIDFR, ioaddr + PCIBusConfig1);
+	}
+	BYTE_REG_BITS_ON(rx_mode, ioaddr + RxConfig);
+}
+
+static void netdev_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+	struct device *hwdev = dev->dev.parent;
+
+	strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
+	strlcpy(info->version, DRV_VERSION, sizeof(info->version));
+	strlcpy(info->bus_info, dev_name(hwdev), sizeof(info->bus_info));
+}
+
+static int netdev_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+	int rc;
+
+	mutex_lock(&rp->task_lock);
+	rc = mii_ethtool_gset(&rp->mii_if, cmd);
+	mutex_unlock(&rp->task_lock);
+
+	return rc;
+}
+
+static int netdev_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+	int rc;
+
+	mutex_lock(&rp->task_lock);
+	rc = mii_ethtool_sset(&rp->mii_if, cmd);
+	rhine_set_carrier(&rp->mii_if);
+	mutex_unlock(&rp->task_lock);
+
+	return rc;
+}
+
+static int netdev_nway_reset(struct net_device *dev)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+
+	return mii_nway_restart(&rp->mii_if);
+}
+
+static u32 netdev_get_link(struct net_device *dev)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+
+	return mii_link_ok(&rp->mii_if);
+}
+
+static u32 netdev_get_msglevel(struct net_device *dev)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+
+	return rp->msg_enable;
+}
+
+static void netdev_set_msglevel(struct net_device *dev, u32 value)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+
+	rp->msg_enable = value;
+}
+
+static void rhine_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+
+	if (!(rp->quirks & rqWOL))
+		return;
+
+	spin_lock_irq(&rp->lock);
+	wol->supported = WAKE_PHY | WAKE_MAGIC |
+			 WAKE_UCAST | WAKE_MCAST | WAKE_BCAST;	/* Untested */
+	wol->wolopts = rp->wolopts;
+	spin_unlock_irq(&rp->lock);
+}
+
+static int rhine_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+	u32 support = WAKE_PHY | WAKE_MAGIC |
+		      WAKE_UCAST | WAKE_MCAST | WAKE_BCAST;	/* Untested */
+
+	if (!(rp->quirks & rqWOL))
+		return -EINVAL;
+
+	if (wol->wolopts & ~support)
+		return -EINVAL;
+
+	spin_lock_irq(&rp->lock);
+	rp->wolopts = wol->wolopts;
+	spin_unlock_irq(&rp->lock);
+
+	return 0;
+}
+
+static const struct ethtool_ops netdev_ethtool_ops = {
+	.get_drvinfo		= netdev_get_drvinfo,
+	.get_settings		= netdev_get_settings,
+	.set_settings		= netdev_set_settings,
+	.nway_reset		= netdev_nway_reset,
+	.get_link		= netdev_get_link,
+	.get_msglevel		= netdev_get_msglevel,
+	.set_msglevel		= netdev_set_msglevel,
+	.get_wol		= rhine_get_wol,
+	.set_wol		= rhine_set_wol,
+};
+
+static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+	int rc;
+
+	if (!netif_running(dev))
+		return -EINVAL;
+
+	mutex_lock(&rp->task_lock);
+	rc = generic_mii_ioctl(&rp->mii_if, if_mii(rq), cmd, NULL);
+	rhine_set_carrier(&rp->mii_if);
+	mutex_unlock(&rp->task_lock);
+
+	return rc;
+}
+
+static int rhine_close(struct net_device *dev)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+	void __iomem *ioaddr = rp->base;
+
+	rhine_task_disable(rp);
+	napi_disable(&rp->napi);
+	netif_stop_queue(dev);
+
+	netif_dbg(rp, ifdown, dev, "Shutting down ethercard, status was %04x\n",
+		  ioread16(ioaddr + ChipCmd));
+
+	/* Switch to loopback mode to avoid hardware races. */
+	iowrite8(rp->tx_thresh | 0x02, ioaddr + TxConfig);
+
+	rhine_irq_disable(rp);
+
+	/* Stop the chip's Tx and Rx processes. */
+	iowrite16(CmdStop, ioaddr + ChipCmd);
+
+	free_irq(rp->irq, dev);
+	free_rbufs(dev);
+	free_tbufs(dev);
+	free_ring(dev);
+
+	return 0;
+}
+
+
+static void rhine_remove_one_pci(struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+	struct rhine_private *rp = netdev_priv(dev);
+
+	unregister_netdev(dev);
+
+	pci_iounmap(pdev, rp->base);
+	pci_release_regions(pdev);
+
+	free_netdev(dev);
+	pci_disable_device(pdev);
+}
+
+static int rhine_remove_one_platform(struct platform_device *pdev)
+{
+	struct net_device *dev = platform_get_drvdata(pdev);
+	struct rhine_private *rp = netdev_priv(dev);
+
+	unregister_netdev(dev);
+
+	iounmap(rp->base);
+
+	free_netdev(dev);
+
+	return 0;
+}
+
+static void rhine_shutdown_pci(struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+	struct rhine_private *rp = netdev_priv(dev);
+	void __iomem *ioaddr = rp->base;
+
+	if (!(rp->quirks & rqWOL))
+		return; /* Nothing to do for non-WOL adapters */
+
+	rhine_power_init(dev);
+
+	/* Make sure we use pattern 0, 1 and not 4, 5 */
+	if (rp->quirks & rq6patterns)
+		iowrite8(0x04, ioaddr + WOLcgClr);
+
+	spin_lock(&rp->lock);
+
+	if (rp->wolopts & WAKE_MAGIC) {
+		iowrite8(WOLmagic, ioaddr + WOLcrSet);
+		/*
+		 * Turn EEPROM-controlled wake-up back on -- some hardware may
+		 * not cooperate otherwise.
+		 */
+		iowrite8(ioread8(ioaddr + ConfigA) | 0x03, ioaddr + ConfigA);
+	}
+
+	if (rp->wolopts & (WAKE_BCAST|WAKE_MCAST))
+		iowrite8(WOLbmcast, ioaddr + WOLcgSet);
+
+	if (rp->wolopts & WAKE_PHY)
+		iowrite8(WOLlnkon | WOLlnkoff, ioaddr + WOLcrSet);
+
+	if (rp->wolopts & WAKE_UCAST)
+		iowrite8(WOLucast, ioaddr + WOLcrSet);
+
+	if (rp->wolopts) {
+		/* Enable legacy WOL (for old motherboards) */
+		iowrite8(0x01, ioaddr + PwcfgSet);
+		iowrite8(ioread8(ioaddr + StickyHW) | 0x04, ioaddr + StickyHW);
+	}
+
+	spin_unlock(&rp->lock);
+
+	if (system_state == SYSTEM_POWER_OFF && !avoid_D3) {
+		iowrite8(ioread8(ioaddr + StickyHW) | 0x03, ioaddr + StickyHW);
+
+		pci_wake_from_d3(pdev, true);
+		pci_set_power_state(pdev, PCI_D3hot);
+	}
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int rhine_suspend(struct device *device)
+{
+	struct net_device *dev = dev_get_drvdata(device);
+	struct rhine_private *rp = netdev_priv(dev);
+
+	if (!netif_running(dev))
+		return 0;
+
+	rhine_task_disable(rp);
+	rhine_irq_disable(rp);
+	napi_disable(&rp->napi);
+
+	netif_device_detach(dev);
+
+	if (dev_is_pci(device))
+		rhine_shutdown_pci(to_pci_dev(device));
+
+	return 0;
+}
+
+static int rhine_resume(struct device *device)
+{
+	struct net_device *dev = dev_get_drvdata(device);
+	struct rhine_private *rp = netdev_priv(dev);
+
+	if (!netif_running(dev))
+		return 0;
+
+	enable_mmio(rp->pioaddr, rp->quirks);
+	rhine_power_init(dev);
+	free_tbufs(dev);
+	free_rbufs(dev);
+	alloc_tbufs(dev);
+	alloc_rbufs(dev);
+	rhine_task_enable(rp);
+	spin_lock_bh(&rp->lock);
+	init_registers(dev);
+	spin_unlock_bh(&rp->lock);
+
+	netif_device_attach(dev);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(rhine_pm_ops, rhine_suspend, rhine_resume);
+#define RHINE_PM_OPS	(&rhine_pm_ops)
+
+#else
+
+#define RHINE_PM_OPS	NULL
+
+#endif /* !CONFIG_PM_SLEEP */
+
+static struct pci_driver rhine_driver_pci = {
+	.name		= DRV_NAME,
+	.id_table	= rhine_pci_tbl,
+	.probe		= rhine_init_one_pci,
+	.remove		= rhine_remove_one_pci,
+	.shutdown	= rhine_shutdown_pci,
+	.driver.pm	= RHINE_PM_OPS,
+};
+
+static struct platform_driver rhine_driver_platform = {
+	.probe		= rhine_init_one_platform,
+	.remove		= rhine_remove_one_platform,
+	.driver = {
+		.name	= DRV_NAME,
+		.of_match_table	= rhine_of_tbl,
+		.pm		= RHINE_PM_OPS,
+	}
+};
+
+static struct dmi_system_id rhine_dmi_table[] __initdata = {
+	{
+		.ident = "EPIA-M",
+		.matches = {
+			DMI_MATCH(DMI_BIOS_VENDOR, "Award Software International, Inc."),
+			DMI_MATCH(DMI_BIOS_VERSION, "6.00 PG"),
+		},
+	},
+	{
+		.ident = "KV7",
+		.matches = {
+			DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies, LTD"),
+			DMI_MATCH(DMI_BIOS_VERSION, "6.00 PG"),
+		},
+	},
+	{ NULL }
+};
+
+static int __init rhine_init(void)
+{
+	int ret_pci, ret_platform;
+
+/* when a module, this is printed whether or not devices are found in probe */
+#ifdef MODULE
+	pr_info("%s\n", version);
+#endif
+	if (dmi_check_system(rhine_dmi_table)) {
+		/* these BIOSes fail at PXE boot if chip is in D3 */
+		avoid_D3 = true;
+		pr_warn("Broken BIOS detected, avoid_D3 enabled\n");
+	}
+	else if (avoid_D3)
+		pr_info("avoid_D3 set\n");
+
+	ret_pci = pci_register_driver(&rhine_driver_pci);
+	ret_platform = platform_driver_register(&rhine_driver_platform);
+	if ((ret_pci < 0) && (ret_platform < 0))
+		return ret_pci;
+
+	return 0;
+}
+
+
+static void __exit rhine_cleanup(void)
+{
+	platform_driver_unregister(&rhine_driver_platform);
+	pci_unregister_driver(&rhine_driver_pci);
+}
+
+
+module_init(rhine_init);
+module_exit(rhine_cleanup);
diff --git a/kernel/drivers/net/ethernet/via/via-velocity.c b/kernel/drivers/net/ethernet/via/via-velocity.c
new file mode 100644
index 000000000..ae68afd50
--- /dev/null
+++ b/kernel/drivers/net/ethernet/via/via-velocity.c
@@ -0,0 +1,3765 @@
+/*
+ * This code is derived from the VIA reference driver (copyright message
+ * below) provided to Red Hat by VIA Networking Technologies, Inc. for
+ * addition to the Linux kernel.
+ *
+ * The code has been merged into one source file, cleaned up to follow
+ * Linux coding style,  ported to the Linux 2.6 kernel tree and cleaned
+ * for 64bit hardware platforms.
+ *
+ * TODO
+ *	rx_copybreak/alignment
+ *	More testing
+ *
+ * The changes are (c) Copyright 2004, Red Hat Inc. <alan@lxorguk.ukuu.org.uk>
+ * Additional fixes and clean up: Francois Romieu
+ *
+ * This source has not been verified for use in safety critical systems.
+ *
+ * Please direct queries about the revamped driver to the linux-kernel
+ * list not VIA.
+ *
+ * Original code:
+ *
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This software may be redistributed and/or modified under
+ * the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * Author: Chuang Liang-Shing, AJ Jiang
+ *
+ * Date: Jan 24, 2003
+ *
+ * MODULE_LICENSE("GPL");
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/bitops.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+#include <linux/mm.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/delay.h>
+#include <linux/timer.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/string.h>
+#include <linux/wait.h>
+#include <linux/io.h>
+#include <linux/if.h>
+#include <linux/uaccess.h>
+#include <linux/proc_fs.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/inetdevice.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/in.h>
+#include <linux/if_arp.h>
+#include <linux/if_vlan.h>
+#include <linux/ip.h>
+#include <linux/tcp.h>
+#include <linux/udp.h>
+#include <linux/crc-ccitt.h>
+#include <linux/crc32.h>
+
+#include "via-velocity.h"
+
+enum velocity_bus_type {
+	BUS_PCI,
+	BUS_PLATFORM,
+};
+
+static int velocity_nics;
+static int msglevel = MSG_LEVEL_INFO;
+
+static void velocity_set_power_state(struct velocity_info *vptr, char state)
+{
+	void *addr = vptr->mac_regs;
+
+	if (vptr->pdev)
+		pci_set_power_state(vptr->pdev, state);
+	else
+		writeb(state, addr + 0x154);
+}
+
+/**
+ *	mac_get_cam_mask	-	Read a CAM mask
+ *	@regs: register block for this velocity
+ *	@mask: buffer to store mask
+ *
+ *	Fetch the mask bits of the selected CAM and store them into the
+ *	provided mask buffer.
+ */
+static void mac_get_cam_mask(struct mac_regs __iomem *regs, u8 *mask)
+{
+	int i;
+
+	/* Select CAM mask */
+	BYTE_REG_BITS_SET(CAMCR_PS_CAM_MASK, CAMCR_PS1 | CAMCR_PS0, &regs->CAMCR);
+
+	writeb(0, &regs->CAMADDR);
+
+	/* read mask */
+	for (i = 0; i < 8; i++)
+		*mask++ = readb(&(regs->MARCAM[i]));
+
+	/* disable CAMEN */
+	writeb(0, &regs->CAMADDR);
+
+	/* Select mar */
+	BYTE_REG_BITS_SET(CAMCR_PS_MAR, CAMCR_PS1 | CAMCR_PS0, &regs->CAMCR);
+}
+
+/**
+ *	mac_set_cam_mask	-	Set a CAM mask
+ *	@regs: register block for this velocity
+ *	@mask: CAM mask to load
+ *
+ *	Store a new mask into a CAM
+ */
+static void mac_set_cam_mask(struct mac_regs __iomem *regs, u8 *mask)
+{
+	int i;
+	/* Select CAM mask */
+	BYTE_REG_BITS_SET(CAMCR_PS_CAM_MASK, CAMCR_PS1 | CAMCR_PS0, &regs->CAMCR);
+
+	writeb(CAMADDR_CAMEN, &regs->CAMADDR);
+
+	for (i = 0; i < 8; i++)
+		writeb(*mask++, &(regs->MARCAM[i]));
+
+	/* disable CAMEN */
+	writeb(0, &regs->CAMADDR);
+
+	/* Select mar */
+	BYTE_REG_BITS_SET(CAMCR_PS_MAR, CAMCR_PS1 | CAMCR_PS0, &regs->CAMCR);
+}
+
+static void mac_set_vlan_cam_mask(struct mac_regs __iomem *regs, u8 *mask)
+{
+	int i;
+	/* Select CAM mask */
+	BYTE_REG_BITS_SET(CAMCR_PS_CAM_MASK, CAMCR_PS1 | CAMCR_PS0, &regs->CAMCR);
+
+	writeb(CAMADDR_CAMEN | CAMADDR_VCAMSL, &regs->CAMADDR);
+
+	for (i = 0; i < 8; i++)
+		writeb(*mask++, &(regs->MARCAM[i]));
+
+	/* disable CAMEN */
+	writeb(0, &regs->CAMADDR);
+
+	/* Select mar */
+	BYTE_REG_BITS_SET(CAMCR_PS_MAR, CAMCR_PS1 | CAMCR_PS0, &regs->CAMCR);
+}
+
+/**
+ *	mac_set_cam	-	set CAM data
+ *	@regs: register block of this velocity
+ *	@idx: Cam index
+ *	@addr: 2 or 6 bytes of CAM data
+ *
+ *	Load an address or vlan tag into a CAM
+ */
+static void mac_set_cam(struct mac_regs __iomem *regs, int idx, const u8 *addr)
+{
+	int i;
+
+	/* Select CAM mask */
+	BYTE_REG_BITS_SET(CAMCR_PS_CAM_DATA, CAMCR_PS1 | CAMCR_PS0, &regs->CAMCR);
+
+	idx &= (64 - 1);
+
+	writeb(CAMADDR_CAMEN | idx, &regs->CAMADDR);
+
+	for (i = 0; i < 6; i++)
+		writeb(*addr++, &(regs->MARCAM[i]));
+
+	BYTE_REG_BITS_ON(CAMCR_CAMWR, &regs->CAMCR);
+
+	udelay(10);
+
+	writeb(0, &regs->CAMADDR);
+
+	/* Select mar */
+	BYTE_REG_BITS_SET(CAMCR_PS_MAR, CAMCR_PS1 | CAMCR_PS0, &regs->CAMCR);
+}
+
+static void mac_set_vlan_cam(struct mac_regs __iomem *regs, int idx,
+			     const u8 *addr)
+{
+
+	/* Select CAM mask */
+	BYTE_REG_BITS_SET(CAMCR_PS_CAM_DATA, CAMCR_PS1 | CAMCR_PS0, &regs->CAMCR);
+
+	idx &= (64 - 1);
+
+	writeb(CAMADDR_CAMEN | CAMADDR_VCAMSL | idx, &regs->CAMADDR);
+	writew(*((u16 *) addr), &regs->MARCAM[0]);
+
+	BYTE_REG_BITS_ON(CAMCR_CAMWR, &regs->CAMCR);
+
+	udelay(10);
+
+	writeb(0, &regs->CAMADDR);
+
+	/* Select mar */
+	BYTE_REG_BITS_SET(CAMCR_PS_MAR, CAMCR_PS1 | CAMCR_PS0, &regs->CAMCR);
+}
+
+
+/**
+ *	mac_wol_reset	-	reset WOL after exiting low power
+ *	@regs: register block of this velocity
+ *
+ *	Called after we drop out of wake on lan mode in order to
+ *	reset the Wake on lan features. This function doesn't restore
+ *	the rest of the logic from the result of sleep/wakeup
+ */
+static void mac_wol_reset(struct mac_regs __iomem *regs)
+{
+
+	/* Turn off SWPTAG right after leaving power mode */
+	BYTE_REG_BITS_OFF(STICKHW_SWPTAG, &regs->STICKHW);
+	/* clear sticky bits */
+	BYTE_REG_BITS_OFF((STICKHW_DS1 | STICKHW_DS0), &regs->STICKHW);
+
+	BYTE_REG_BITS_OFF(CHIPGCR_FCGMII, &regs->CHIPGCR);
+	BYTE_REG_BITS_OFF(CHIPGCR_FCMODE, &regs->CHIPGCR);
+	/* disable force PME-enable */
+	writeb(WOLCFG_PMEOVR, &regs->WOLCFGClr);
+	/* disable power-event config bit */
+	writew(0xFFFF, &regs->WOLCRClr);
+	/* clear power status */
+	writew(0xFFFF, &regs->WOLSRClr);
+}
+
+static const struct ethtool_ops velocity_ethtool_ops;
+
+/*
+    Define module options
+*/
+
+MODULE_AUTHOR("VIA Networking Technologies, Inc.");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("VIA Networking Velocity Family Gigabit Ethernet Adapter Driver");
+
+#define VELOCITY_PARAM(N, D) \
+	static int N[MAX_UNITS] = OPTION_DEFAULT;\
+	module_param_array(N, int, NULL, 0); \
+	MODULE_PARM_DESC(N, D);
+
+#define RX_DESC_MIN     64
+#define RX_DESC_MAX     255
+#define RX_DESC_DEF     64
+VELOCITY_PARAM(RxDescriptors, "Number of receive descriptors");
+
+#define TX_DESC_MIN     16
+#define TX_DESC_MAX     256
+#define TX_DESC_DEF     64
+VELOCITY_PARAM(TxDescriptors, "Number of transmit descriptors");
+
+#define RX_THRESH_MIN   0
+#define RX_THRESH_MAX   3
+#define RX_THRESH_DEF   0
+/* rx_thresh[] is used for controlling the receive fifo threshold.
+   0: indicate the rxfifo threshold is 128 bytes.
+   1: indicate the rxfifo threshold is 512 bytes.
+   2: indicate the rxfifo threshold is 1024 bytes.
+   3: indicate the rxfifo threshold is store & forward.
+*/
+VELOCITY_PARAM(rx_thresh, "Receive fifo threshold");
+
+#define DMA_LENGTH_MIN  0
+#define DMA_LENGTH_MAX  7
+#define DMA_LENGTH_DEF  6
+
+/* DMA_length[] is used for controlling the DMA length
+   0: 8 DWORDs
+   1: 16 DWORDs
+   2: 32 DWORDs
+   3: 64 DWORDs
+   4: 128 DWORDs
+   5: 256 DWORDs
+   6: SF(flush till emply)
+   7: SF(flush till emply)
+*/
+VELOCITY_PARAM(DMA_length, "DMA length");
+
+#define IP_ALIG_DEF     0
+/* IP_byte_align[] is used for IP header DWORD byte aligned
+   0: indicate the IP header won't be DWORD byte aligned.(Default) .
+   1: indicate the IP header will be DWORD byte aligned.
+      In some environment, the IP header should be DWORD byte aligned,
+      or the packet will be droped when we receive it. (eg: IPVS)
+*/
+VELOCITY_PARAM(IP_byte_align, "Enable IP header dword aligned");
+
+#define FLOW_CNTL_DEF   1
+#define FLOW_CNTL_MIN   1
+#define FLOW_CNTL_MAX   5
+
+/* flow_control[] is used for setting the flow control ability of NIC.
+   1: hardware deafult - AUTO (default). Use Hardware default value in ANAR.
+   2: enable TX flow control.
+   3: enable RX flow control.
+   4: enable RX/TX flow control.
+   5: disable
+*/
+VELOCITY_PARAM(flow_control, "Enable flow control ability");
+
+#define MED_LNK_DEF 0
+#define MED_LNK_MIN 0
+#define MED_LNK_MAX 5
+/* speed_duplex[] is used for setting the speed and duplex mode of NIC.
+   0: indicate autonegotiation for both speed and duplex mode
+   1: indicate 100Mbps half duplex mode
+   2: indicate 100Mbps full duplex mode
+   3: indicate 10Mbps half duplex mode
+   4: indicate 10Mbps full duplex mode
+   5: indicate 1000Mbps full duplex mode
+
+   Note:
+   if EEPROM have been set to the force mode, this option is ignored
+   by driver.
+*/
+VELOCITY_PARAM(speed_duplex, "Setting the speed and duplex mode");
+
+#define VAL_PKT_LEN_DEF     0
+/* ValPktLen[] is used for setting the checksum offload ability of NIC.
+   0: Receive frame with invalid layer 2 length (Default)
+   1: Drop frame with invalid layer 2 length
+*/
+VELOCITY_PARAM(ValPktLen, "Receiving or Drop invalid 802.3 frame");
+
+#define WOL_OPT_DEF     0
+#define WOL_OPT_MIN     0
+#define WOL_OPT_MAX     7
+/* wol_opts[] is used for controlling wake on lan behavior.
+   0: Wake up if recevied a magic packet. (Default)
+   1: Wake up if link status is on/off.
+   2: Wake up if recevied an arp packet.
+   4: Wake up if recevied any unicast packet.
+   Those value can be sumed up to support more than one option.
+*/
+VELOCITY_PARAM(wol_opts, "Wake On Lan options");
+
+static int rx_copybreak = 200;
+module_param(rx_copybreak, int, 0644);
+MODULE_PARM_DESC(rx_copybreak, "Copy breakpoint for copy-only-tiny-frames");
+
+/*
+ *	Internal board variants. At the moment we have only one
+ */
+static struct velocity_info_tbl chip_info_table[] = {
+	{CHIP_TYPE_VT6110, "VIA Networking Velocity Family Gigabit Ethernet Adapter", 1, 0x00FFFFFFUL},
+	{ }
+};
+
+/*
+ *	Describe the PCI device identifiers that we support in this
+ *	device driver. Used for hotplug autoloading.
+ */
+
+static const struct pci_device_id velocity_pci_id_table[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_612X) },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(pci, velocity_pci_id_table);
+
+/**
+ *	Describe the OF device identifiers that we support in this
+ *	device driver. Used for devicetree nodes.
+ */
+static const struct of_device_id velocity_of_ids[] = {
+	{ .compatible = "via,velocity-vt6110", .data = &chip_info_table[0] },
+	{ /* Sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, velocity_of_ids);
+
+/**
+ *	get_chip_name	- 	identifier to name
+ *	@id: chip identifier
+ *
+ *	Given a chip identifier return a suitable description. Returns
+ *	a pointer a static string valid while the driver is loaded.
+ */
+static const char *get_chip_name(enum chip_type chip_id)
+{
+	int i;
+	for (i = 0; chip_info_table[i].name != NULL; i++)
+		if (chip_info_table[i].chip_id == chip_id)
+			break;
+	return chip_info_table[i].name;
+}
+
+/**
+ *	velocity_set_int_opt	-	parser for integer options
+ *	@opt: pointer to option value
+ *	@val: value the user requested (or -1 for default)
+ *	@min: lowest value allowed
+ *	@max: highest value allowed
+ *	@def: default value
+ *	@name: property name
+ *	@dev: device name
+ *
+ *	Set an integer property in the module options. This function does
+ *	all the verification and checking as well as reporting so that
+ *	we don't duplicate code for each option.
+ */
+static void velocity_set_int_opt(int *opt, int val, int min, int max, int def,
+				 char *name, const char *devname)
+{
+	if (val == -1)
+		*opt = def;
+	else if (val < min || val > max) {
+		VELOCITY_PRT(MSG_LEVEL_INFO, KERN_NOTICE "%s: the value of parameter %s is invalid, the valid range is (%d-%d)\n",
+					devname, name, min, max);
+		*opt = def;
+	} else {
+		VELOCITY_PRT(MSG_LEVEL_INFO, KERN_INFO "%s: set value of parameter %s to %d\n",
+					devname, name, val);
+		*opt = val;
+	}
+}
+
+/**
+ *	velocity_set_bool_opt	-	parser for boolean options
+ *	@opt: pointer to option value
+ *	@val: value the user requested (or -1 for default)
+ *	@def: default value (yes/no)
+ *	@flag: numeric value to set for true.
+ *	@name: property name
+ *	@dev: device name
+ *
+ *	Set a boolean property in the module options. This function does
+ *	all the verification and checking as well as reporting so that
+ *	we don't duplicate code for each option.
+ */
+static void velocity_set_bool_opt(u32 *opt, int val, int def, u32 flag,
+				  char *name, const char *devname)
+{
+	(*opt) &= (~flag);
+	if (val == -1)
+		*opt |= (def ? flag : 0);
+	else if (val < 0 || val > 1) {
+		printk(KERN_NOTICE "%s: the value of parameter %s is invalid, the valid range is (0-1)\n",
+			devname, name);
+		*opt |= (def ? flag : 0);
+	} else {
+		printk(KERN_INFO "%s: set parameter %s to %s\n",
+			devname, name, val ? "TRUE" : "FALSE");
+		*opt |= (val ? flag : 0);
+	}
+}
+
+/**
+ *	velocity_get_options	-	set options on device
+ *	@opts: option structure for the device
+ *	@index: index of option to use in module options array
+ *	@devname: device name
+ *
+ *	Turn the module and command options into a single structure
+ *	for the current device
+ */
+static void velocity_get_options(struct velocity_opt *opts, int index,
+				 const char *devname)
+{
+
+	velocity_set_int_opt(&opts->rx_thresh, rx_thresh[index], RX_THRESH_MIN, RX_THRESH_MAX, RX_THRESH_DEF, "rx_thresh", devname);
+	velocity_set_int_opt(&opts->DMA_length, DMA_length[index], DMA_LENGTH_MIN, DMA_LENGTH_MAX, DMA_LENGTH_DEF, "DMA_length", devname);
+	velocity_set_int_opt(&opts->numrx, RxDescriptors[index], RX_DESC_MIN, RX_DESC_MAX, RX_DESC_DEF, "RxDescriptors", devname);
+	velocity_set_int_opt(&opts->numtx, TxDescriptors[index], TX_DESC_MIN, TX_DESC_MAX, TX_DESC_DEF, "TxDescriptors", devname);
+
+	velocity_set_int_opt(&opts->flow_cntl, flow_control[index], FLOW_CNTL_MIN, FLOW_CNTL_MAX, FLOW_CNTL_DEF, "flow_control", devname);
+	velocity_set_bool_opt(&opts->flags, IP_byte_align[index], IP_ALIG_DEF, VELOCITY_FLAGS_IP_ALIGN, "IP_byte_align", devname);
+	velocity_set_bool_opt(&opts->flags, ValPktLen[index], VAL_PKT_LEN_DEF, VELOCITY_FLAGS_VAL_PKT_LEN, "ValPktLen", devname);
+	velocity_set_int_opt((int *) &opts->spd_dpx, speed_duplex[index], MED_LNK_MIN, MED_LNK_MAX, MED_LNK_DEF, "Media link mode", devname);
+	velocity_set_int_opt(&opts->wol_opts, wol_opts[index], WOL_OPT_MIN, WOL_OPT_MAX, WOL_OPT_DEF, "Wake On Lan options", devname);
+	opts->numrx = (opts->numrx & ~3);
+}
+
+/**
+ *	velocity_init_cam_filter	-	initialise CAM
+ *	@vptr: velocity to program
+ *
+ *	Initialize the content addressable memory used for filters. Load
+ *	appropriately according to the presence of VLAN
+ */
+static void velocity_init_cam_filter(struct velocity_info *vptr)
+{
+	struct mac_regs __iomem *regs = vptr->mac_regs;
+	unsigned int vid, i = 0;
+
+	/* Turn on MCFG_PQEN, turn off MCFG_RTGOPT */
+	WORD_REG_BITS_SET(MCFG_PQEN, MCFG_RTGOPT, &regs->MCFG);
+	WORD_REG_BITS_ON(MCFG_VIDFR, &regs->MCFG);
+
+	/* Disable all CAMs */
+	memset(vptr->vCAMmask, 0, sizeof(u8) * 8);
+	memset(vptr->mCAMmask, 0, sizeof(u8) * 8);
+	mac_set_vlan_cam_mask(regs, vptr->vCAMmask);
+	mac_set_cam_mask(regs, vptr->mCAMmask);
+
+	/* Enable VCAMs */
+	for_each_set_bit(vid, vptr->active_vlans, VLAN_N_VID) {
+		mac_set_vlan_cam(regs, i, (u8 *) &vid);
+		vptr->vCAMmask[i / 8] |= 0x1 << (i % 8);
+		if (++i >= VCAM_SIZE)
+			break;
+	}
+	mac_set_vlan_cam_mask(regs, vptr->vCAMmask);
+}
+
+static int velocity_vlan_rx_add_vid(struct net_device *dev,
+				    __be16 proto, u16 vid)
+{
+	struct velocity_info *vptr = netdev_priv(dev);
+
+	spin_lock_irq(&vptr->lock);
+	set_bit(vid, vptr->active_vlans);
+	velocity_init_cam_filter(vptr);
+	spin_unlock_irq(&vptr->lock);
+	return 0;
+}
+
+static int velocity_vlan_rx_kill_vid(struct net_device *dev,
+				     __be16 proto, u16 vid)
+{
+	struct velocity_info *vptr = netdev_priv(dev);
+
+	spin_lock_irq(&vptr->lock);
+	clear_bit(vid, vptr->active_vlans);
+	velocity_init_cam_filter(vptr);
+	spin_unlock_irq(&vptr->lock);
+	return 0;
+}
+
+static void velocity_init_rx_ring_indexes(struct velocity_info *vptr)
+{
+	vptr->rx.dirty = vptr->rx.filled = vptr->rx.curr = 0;
+}
+
+/**
+ *	velocity_rx_reset	-	handle a receive reset
+ *	@vptr: velocity we are resetting
+ *
+ *	Reset the ownership and status for the receive ring side.
+ *	Hand all the receive queue to the NIC.
+ */
+static void velocity_rx_reset(struct velocity_info *vptr)
+{
+
+	struct mac_regs __iomem *regs = vptr->mac_regs;
+	int i;
+
+	velocity_init_rx_ring_indexes(vptr);
+
+	/*
+	 *	Init state, all RD entries belong to the NIC
+	 */
+	for (i = 0; i < vptr->options.numrx; ++i)
+		vptr->rx.ring[i].rdesc0.len |= OWNED_BY_NIC;
+
+	writew(vptr->options.numrx, &regs->RBRDU);
+	writel(vptr->rx.pool_dma, &regs->RDBaseLo);
+	writew(0, &regs->RDIdx);
+	writew(vptr->options.numrx - 1, &regs->RDCSize);
+}
+
+/**
+ *	velocity_get_opt_media_mode	-	get media selection
+ *	@vptr: velocity adapter
+ *
+ *	Get the media mode stored in EEPROM or module options and load
+ *	mii_status accordingly. The requested link state information
+ *	is also returned.
+ */
+static u32 velocity_get_opt_media_mode(struct velocity_info *vptr)
+{
+	u32 status = 0;
+
+	switch (vptr->options.spd_dpx) {
+	case SPD_DPX_AUTO:
+		status = VELOCITY_AUTONEG_ENABLE;
+		break;
+	case SPD_DPX_100_FULL:
+		status = VELOCITY_SPEED_100 | VELOCITY_DUPLEX_FULL;
+		break;
+	case SPD_DPX_10_FULL:
+		status = VELOCITY_SPEED_10 | VELOCITY_DUPLEX_FULL;
+		break;
+	case SPD_DPX_100_HALF:
+		status = VELOCITY_SPEED_100;
+		break;
+	case SPD_DPX_10_HALF:
+		status = VELOCITY_SPEED_10;
+		break;
+	case SPD_DPX_1000_FULL:
+		status = VELOCITY_SPEED_1000 | VELOCITY_DUPLEX_FULL;
+		break;
+	}
+	vptr->mii_status = status;
+	return status;
+}
+
+/**
+ *	safe_disable_mii_autopoll	-	autopoll off
+ *	@regs: velocity registers
+ *
+ *	Turn off the autopoll and wait for it to disable on the chip
+ */
+static void safe_disable_mii_autopoll(struct mac_regs __iomem *regs)
+{
+	u16 ww;
+
+	/*  turn off MAUTO */
+	writeb(0, &regs->MIICR);
+	for (ww = 0; ww < W_MAX_TIMEOUT; ww++) {
+		udelay(1);
+		if (BYTE_REG_BITS_IS_ON(MIISR_MIDLE, &regs->MIISR))
+			break;
+	}
+}
+
+/**
+ *	enable_mii_autopoll	-	turn on autopolling
+ *	@regs: velocity registers
+ *
+ *	Enable the MII link status autopoll feature on the Velocity
+ *	hardware. Wait for it to enable.
+ */
+static void enable_mii_autopoll(struct mac_regs __iomem *regs)
+{
+	int ii;
+
+	writeb(0, &(regs->MIICR));
+	writeb(MIIADR_SWMPL, &regs->MIIADR);
+
+	for (ii = 0; ii < W_MAX_TIMEOUT; ii++) {
+		udelay(1);
+		if (BYTE_REG_BITS_IS_ON(MIISR_MIDLE, &regs->MIISR))
+			break;
+	}
+
+	writeb(MIICR_MAUTO, &regs->MIICR);
+
+	for (ii = 0; ii < W_MAX_TIMEOUT; ii++) {
+		udelay(1);
+		if (!BYTE_REG_BITS_IS_ON(MIISR_MIDLE, &regs->MIISR))
+			break;
+	}
+
+}
+
+/**
+ *	velocity_mii_read	-	read MII data
+ *	@regs: velocity registers
+ *	@index: MII register index
+ *	@data: buffer for received data
+ *
+ *	Perform a single read of an MII 16bit register. Returns zero
+ *	on success or -ETIMEDOUT if the PHY did not respond.
+ */
+static int velocity_mii_read(struct mac_regs __iomem *regs, u8 index, u16 *data)
+{
+	u16 ww;
+
+	/*
+	 *	Disable MIICR_MAUTO, so that mii addr can be set normally
+	 */
+	safe_disable_mii_autopoll(regs);
+
+	writeb(index, &regs->MIIADR);
+
+	BYTE_REG_BITS_ON(MIICR_RCMD, &regs->MIICR);
+
+	for (ww = 0; ww < W_MAX_TIMEOUT; ww++) {
+		if (!(readb(&regs->MIICR) & MIICR_RCMD))
+			break;
+	}
+
+	*data = readw(&regs->MIIDATA);
+
+	enable_mii_autopoll(regs);
+	if (ww == W_MAX_TIMEOUT)
+		return -ETIMEDOUT;
+	return 0;
+}
+
+/**
+ *	mii_check_media_mode	-	check media state
+ *	@regs: velocity registers
+ *
+ *	Check the current MII status and determine the link status
+ *	accordingly
+ */
+static u32 mii_check_media_mode(struct mac_regs __iomem *regs)
+{
+	u32 status = 0;
+	u16 ANAR;
+
+	if (!MII_REG_BITS_IS_ON(BMSR_LSTATUS, MII_BMSR, regs))
+		status |= VELOCITY_LINK_FAIL;
+
+	if (MII_REG_BITS_IS_ON(ADVERTISE_1000FULL, MII_CTRL1000, regs))
+		status |= VELOCITY_SPEED_1000 | VELOCITY_DUPLEX_FULL;
+	else if (MII_REG_BITS_IS_ON(ADVERTISE_1000HALF, MII_CTRL1000, regs))
+		status |= (VELOCITY_SPEED_1000);
+	else {
+		velocity_mii_read(regs, MII_ADVERTISE, &ANAR);
+		if (ANAR & ADVERTISE_100FULL)
+			status |= (VELOCITY_SPEED_100 | VELOCITY_DUPLEX_FULL);
+		else if (ANAR & ADVERTISE_100HALF)
+			status |= VELOCITY_SPEED_100;
+		else if (ANAR & ADVERTISE_10FULL)
+			status |= (VELOCITY_SPEED_10 | VELOCITY_DUPLEX_FULL);
+		else
+			status |= (VELOCITY_SPEED_10);
+	}
+
+	if (MII_REG_BITS_IS_ON(BMCR_ANENABLE, MII_BMCR, regs)) {
+		velocity_mii_read(regs, MII_ADVERTISE, &ANAR);
+		if ((ANAR & (ADVERTISE_100FULL | ADVERTISE_100HALF | ADVERTISE_10FULL | ADVERTISE_10HALF))
+		    == (ADVERTISE_100FULL | ADVERTISE_100HALF | ADVERTISE_10FULL | ADVERTISE_10HALF)) {
+			if (MII_REG_BITS_IS_ON(ADVERTISE_1000HALF | ADVERTISE_1000FULL, MII_CTRL1000, regs))
+				status |= VELOCITY_AUTONEG_ENABLE;
+		}
+	}
+
+	return status;
+}
+
+/**
+ *	velocity_mii_write	-	write MII data
+ *	@regs: velocity registers
+ *	@index: MII register index
+ *	@data: 16bit data for the MII register
+ *
+ *	Perform a single write to an MII 16bit register. Returns zero
+ *	on success or -ETIMEDOUT if the PHY did not respond.
+ */
+static int velocity_mii_write(struct mac_regs __iomem *regs, u8 mii_addr, u16 data)
+{
+	u16 ww;
+
+	/*
+	 *	Disable MIICR_MAUTO, so that mii addr can be set normally
+	 */
+	safe_disable_mii_autopoll(regs);
+
+	/* MII reg offset */
+	writeb(mii_addr, &regs->MIIADR);
+	/* set MII data */
+	writew(data, &regs->MIIDATA);
+
+	/* turn on MIICR_WCMD */
+	BYTE_REG_BITS_ON(MIICR_WCMD, &regs->MIICR);
+
+	/* W_MAX_TIMEOUT is the timeout period */
+	for (ww = 0; ww < W_MAX_TIMEOUT; ww++) {
+		udelay(5);
+		if (!(readb(&regs->MIICR) & MIICR_WCMD))
+			break;
+	}
+	enable_mii_autopoll(regs);
+
+	if (ww == W_MAX_TIMEOUT)
+		return -ETIMEDOUT;
+	return 0;
+}
+
+/**
+ *	set_mii_flow_control	-	flow control setup
+ *	@vptr: velocity interface
+ *
+ *	Set up the flow control on this interface according to
+ *	the supplied user/eeprom options.
+ */
+static void set_mii_flow_control(struct velocity_info *vptr)
+{
+	/*Enable or Disable PAUSE in ANAR */
+	switch (vptr->options.flow_cntl) {
+	case FLOW_CNTL_TX:
+		MII_REG_BITS_OFF(ADVERTISE_PAUSE_CAP, MII_ADVERTISE, vptr->mac_regs);
+		MII_REG_BITS_ON(ADVERTISE_PAUSE_ASYM, MII_ADVERTISE, vptr->mac_regs);
+		break;
+
+	case FLOW_CNTL_RX:
+		MII_REG_BITS_ON(ADVERTISE_PAUSE_CAP, MII_ADVERTISE, vptr->mac_regs);
+		MII_REG_BITS_ON(ADVERTISE_PAUSE_ASYM, MII_ADVERTISE, vptr->mac_regs);
+		break;
+
+	case FLOW_CNTL_TX_RX:
+		MII_REG_BITS_ON(ADVERTISE_PAUSE_CAP, MII_ADVERTISE, vptr->mac_regs);
+		MII_REG_BITS_OFF(ADVERTISE_PAUSE_ASYM, MII_ADVERTISE, vptr->mac_regs);
+		break;
+
+	case FLOW_CNTL_DISABLE:
+		MII_REG_BITS_OFF(ADVERTISE_PAUSE_CAP, MII_ADVERTISE, vptr->mac_regs);
+		MII_REG_BITS_OFF(ADVERTISE_PAUSE_ASYM, MII_ADVERTISE, vptr->mac_regs);
+		break;
+	default:
+		break;
+	}
+}
+
+/**
+ *	mii_set_auto_on		-	autonegotiate on
+ *	@vptr: velocity
+ *
+ *	Enable autonegotation on this interface
+ */
+static void mii_set_auto_on(struct velocity_info *vptr)
+{
+	if (MII_REG_BITS_IS_ON(BMCR_ANENABLE, MII_BMCR, vptr->mac_regs))
+		MII_REG_BITS_ON(BMCR_ANRESTART, MII_BMCR, vptr->mac_regs);
+	else
+		MII_REG_BITS_ON(BMCR_ANENABLE, MII_BMCR, vptr->mac_regs);
+}
+
+static u32 check_connection_type(struct mac_regs __iomem *regs)
+{
+	u32 status = 0;
+	u8 PHYSR0;
+	u16 ANAR;
+	PHYSR0 = readb(&regs->PHYSR0);
+
+	/*
+	   if (!(PHYSR0 & PHYSR0_LINKGD))
+	   status|=VELOCITY_LINK_FAIL;
+	 */
+
+	if (PHYSR0 & PHYSR0_FDPX)
+		status |= VELOCITY_DUPLEX_FULL;
+
+	if (PHYSR0 & PHYSR0_SPDG)
+		status |= VELOCITY_SPEED_1000;
+	else if (PHYSR0 & PHYSR0_SPD10)
+		status |= VELOCITY_SPEED_10;
+	else
+		status |= VELOCITY_SPEED_100;
+
+	if (MII_REG_BITS_IS_ON(BMCR_ANENABLE, MII_BMCR, regs)) {
+		velocity_mii_read(regs, MII_ADVERTISE, &ANAR);
+		if ((ANAR & (ADVERTISE_100FULL | ADVERTISE_100HALF | ADVERTISE_10FULL | ADVERTISE_10HALF))
+		    == (ADVERTISE_100FULL | ADVERTISE_100HALF | ADVERTISE_10FULL | ADVERTISE_10HALF)) {
+			if (MII_REG_BITS_IS_ON(ADVERTISE_1000HALF | ADVERTISE_1000FULL, MII_CTRL1000, regs))
+				status |= VELOCITY_AUTONEG_ENABLE;
+		}
+	}
+
+	return status;
+}
+
+/**
+ *	velocity_set_media_mode		-	set media mode
+ *	@mii_status: old MII link state
+ *
+ *	Check the media link state and configure the flow control
+ *	PHY and also velocity hardware setup accordingly. In particular
+ *	we need to set up CD polling and frame bursting.
+ */
+static int velocity_set_media_mode(struct velocity_info *vptr, u32 mii_status)
+{
+	u32 curr_status;
+	struct mac_regs __iomem *regs = vptr->mac_regs;
+
+	vptr->mii_status = mii_check_media_mode(vptr->mac_regs);
+	curr_status = vptr->mii_status & (~VELOCITY_LINK_FAIL);
+
+	/* Set mii link status */
+	set_mii_flow_control(vptr);
+
+	/*
+	   Check if new status is consistent with current status
+	   if (((mii_status & curr_status) & VELOCITY_AUTONEG_ENABLE) ||
+	       (mii_status==curr_status)) {
+	   vptr->mii_status=mii_check_media_mode(vptr->mac_regs);
+	   vptr->mii_status=check_connection_type(vptr->mac_regs);
+	   VELOCITY_PRT(MSG_LEVEL_INFO, "Velocity link no change\n");
+	   return 0;
+	   }
+	 */
+
+	if (PHYID_GET_PHY_ID(vptr->phy_id) == PHYID_CICADA_CS8201)
+		MII_REG_BITS_ON(AUXCR_MDPPS, MII_NCONFIG, vptr->mac_regs);
+
+	/*
+	 *	If connection type is AUTO
+	 */
+	if (mii_status & VELOCITY_AUTONEG_ENABLE) {
+		VELOCITY_PRT(MSG_LEVEL_INFO, "Velocity is AUTO mode\n");
+		/* clear force MAC mode bit */
+		BYTE_REG_BITS_OFF(CHIPGCR_FCMODE, &regs->CHIPGCR);
+		/* set duplex mode of MAC according to duplex mode of MII */
+		MII_REG_BITS_ON(ADVERTISE_100FULL | ADVERTISE_100HALF | ADVERTISE_10FULL | ADVERTISE_10HALF, MII_ADVERTISE, vptr->mac_regs);
+		MII_REG_BITS_ON(ADVERTISE_1000FULL | ADVERTISE_1000HALF, MII_CTRL1000, vptr->mac_regs);
+		MII_REG_BITS_ON(BMCR_SPEED1000, MII_BMCR, vptr->mac_regs);
+
+		/* enable AUTO-NEGO mode */
+		mii_set_auto_on(vptr);
+	} else {
+		u16 CTRL1000;
+		u16 ANAR;
+		u8 CHIPGCR;
+
+		/*
+		 * 1. if it's 3119, disable frame bursting in halfduplex mode
+		 *    and enable it in fullduplex mode
+		 * 2. set correct MII/GMII and half/full duplex mode in CHIPGCR
+		 * 3. only enable CD heart beat counter in 10HD mode
+		 */
+
+		/* set force MAC mode bit */
+		BYTE_REG_BITS_ON(CHIPGCR_FCMODE, &regs->CHIPGCR);
+
+		CHIPGCR = readb(&regs->CHIPGCR);
+
+		if (mii_status & VELOCITY_SPEED_1000)
+			CHIPGCR |= CHIPGCR_FCGMII;
+		else
+			CHIPGCR &= ~CHIPGCR_FCGMII;
+
+		if (mii_status & VELOCITY_DUPLEX_FULL) {
+			CHIPGCR |= CHIPGCR_FCFDX;
+			writeb(CHIPGCR, &regs->CHIPGCR);
+			VELOCITY_PRT(MSG_LEVEL_INFO, "set Velocity to forced full mode\n");
+			if (vptr->rev_id < REV_ID_VT3216_A0)
+				BYTE_REG_BITS_OFF(TCR_TB2BDIS, &regs->TCR);
+		} else {
+			CHIPGCR &= ~CHIPGCR_FCFDX;
+			VELOCITY_PRT(MSG_LEVEL_INFO, "set Velocity to forced half mode\n");
+			writeb(CHIPGCR, &regs->CHIPGCR);
+			if (vptr->rev_id < REV_ID_VT3216_A0)
+				BYTE_REG_BITS_ON(TCR_TB2BDIS, &regs->TCR);
+		}
+
+		velocity_mii_read(vptr->mac_regs, MII_CTRL1000, &CTRL1000);
+		CTRL1000 &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF);
+		if ((mii_status & VELOCITY_SPEED_1000) &&
+		    (mii_status & VELOCITY_DUPLEX_FULL)) {
+			CTRL1000 |= ADVERTISE_1000FULL;
+		}
+		velocity_mii_write(vptr->mac_regs, MII_CTRL1000, CTRL1000);
+
+		if (!(mii_status & VELOCITY_DUPLEX_FULL) && (mii_status & VELOCITY_SPEED_10))
+			BYTE_REG_BITS_OFF(TESTCFG_HBDIS, &regs->TESTCFG);
+		else
+			BYTE_REG_BITS_ON(TESTCFG_HBDIS, &regs->TESTCFG);
+
+		/* MII_REG_BITS_OFF(BMCR_SPEED1000, MII_BMCR, vptr->mac_regs); */
+		velocity_mii_read(vptr->mac_regs, MII_ADVERTISE, &ANAR);
+		ANAR &= (~(ADVERTISE_100FULL | ADVERTISE_100HALF | ADVERTISE_10FULL | ADVERTISE_10HALF));
+		if (mii_status & VELOCITY_SPEED_100) {
+			if (mii_status & VELOCITY_DUPLEX_FULL)
+				ANAR |= ADVERTISE_100FULL;
+			else
+				ANAR |= ADVERTISE_100HALF;
+		} else if (mii_status & VELOCITY_SPEED_10) {
+			if (mii_status & VELOCITY_DUPLEX_FULL)
+				ANAR |= ADVERTISE_10FULL;
+			else
+				ANAR |= ADVERTISE_10HALF;
+		}
+		velocity_mii_write(vptr->mac_regs, MII_ADVERTISE, ANAR);
+		/* enable AUTO-NEGO mode */
+		mii_set_auto_on(vptr);
+		/* MII_REG_BITS_ON(BMCR_ANENABLE, MII_BMCR, vptr->mac_regs); */
+	}
+	/* vptr->mii_status=mii_check_media_mode(vptr->mac_regs); */
+	/* vptr->mii_status=check_connection_type(vptr->mac_regs); */
+	return VELOCITY_LINK_CHANGE;
+}
+
+/**
+ *	velocity_print_link_status	-	link status reporting
+ *	@vptr: velocity to report on
+ *
+ *	Turn the link status of the velocity card into a kernel log
+ *	description of the new link state, detailing speed and duplex
+ *	status
+ */
+static void velocity_print_link_status(struct velocity_info *vptr)
+{
+
+	if (vptr->mii_status & VELOCITY_LINK_FAIL) {
+		VELOCITY_PRT(MSG_LEVEL_INFO, KERN_NOTICE "%s: failed to detect cable link\n", vptr->netdev->name);
+	} else if (vptr->options.spd_dpx == SPD_DPX_AUTO) {
+		VELOCITY_PRT(MSG_LEVEL_INFO, KERN_NOTICE "%s: Link auto-negotiation", vptr->netdev->name);
+
+		if (vptr->mii_status & VELOCITY_SPEED_1000)
+			VELOCITY_PRT(MSG_LEVEL_INFO, " speed 1000M bps");
+		else if (vptr->mii_status & VELOCITY_SPEED_100)
+			VELOCITY_PRT(MSG_LEVEL_INFO, " speed 100M bps");
+		else
+			VELOCITY_PRT(MSG_LEVEL_INFO, " speed 10M bps");
+
+		if (vptr->mii_status & VELOCITY_DUPLEX_FULL)
+			VELOCITY_PRT(MSG_LEVEL_INFO, " full duplex\n");
+		else
+			VELOCITY_PRT(MSG_LEVEL_INFO, " half duplex\n");
+	} else {
+		VELOCITY_PRT(MSG_LEVEL_INFO, KERN_NOTICE "%s: Link forced", vptr->netdev->name);
+		switch (vptr->options.spd_dpx) {
+		case SPD_DPX_1000_FULL:
+			VELOCITY_PRT(MSG_LEVEL_INFO, " speed 1000M bps full duplex\n");
+			break;
+		case SPD_DPX_100_HALF:
+			VELOCITY_PRT(MSG_LEVEL_INFO, " speed 100M bps half duplex\n");
+			break;
+		case SPD_DPX_100_FULL:
+			VELOCITY_PRT(MSG_LEVEL_INFO, " speed 100M bps full duplex\n");
+			break;
+		case SPD_DPX_10_HALF:
+			VELOCITY_PRT(MSG_LEVEL_INFO, " speed 10M bps half duplex\n");
+			break;
+		case SPD_DPX_10_FULL:
+			VELOCITY_PRT(MSG_LEVEL_INFO, " speed 10M bps full duplex\n");
+			break;
+		default:
+			break;
+		}
+	}
+}
+
+/**
+ *	enable_flow_control_ability	-	flow control
+ *	@vptr: veloity to configure
+ *
+ *	Set up flow control according to the flow control options
+ *	determined by the eeprom/configuration.
+ */
+static void enable_flow_control_ability(struct velocity_info *vptr)
+{
+
+	struct mac_regs __iomem *regs = vptr->mac_regs;
+
+	switch (vptr->options.flow_cntl) {
+
+	case FLOW_CNTL_DEFAULT:
+		if (BYTE_REG_BITS_IS_ON(PHYSR0_RXFLC, &regs->PHYSR0))
+			writel(CR0_FDXRFCEN, &regs->CR0Set);
+		else
+			writel(CR0_FDXRFCEN, &regs->CR0Clr);
+
+		if (BYTE_REG_BITS_IS_ON(PHYSR0_TXFLC, &regs->PHYSR0))
+			writel(CR0_FDXTFCEN, &regs->CR0Set);
+		else
+			writel(CR0_FDXTFCEN, &regs->CR0Clr);
+		break;
+
+	case FLOW_CNTL_TX:
+		writel(CR0_FDXTFCEN, &regs->CR0Set);
+		writel(CR0_FDXRFCEN, &regs->CR0Clr);
+		break;
+
+	case FLOW_CNTL_RX:
+		writel(CR0_FDXRFCEN, &regs->CR0Set);
+		writel(CR0_FDXTFCEN, &regs->CR0Clr);
+		break;
+
+	case FLOW_CNTL_TX_RX:
+		writel(CR0_FDXTFCEN, &regs->CR0Set);
+		writel(CR0_FDXRFCEN, &regs->CR0Set);
+		break;
+
+	case FLOW_CNTL_DISABLE:
+		writel(CR0_FDXRFCEN, &regs->CR0Clr);
+		writel(CR0_FDXTFCEN, &regs->CR0Clr);
+		break;
+
+	default:
+		break;
+	}
+
+}
+
+/**
+ *	velocity_soft_reset	-	soft reset
+ *	@vptr: velocity to reset
+ *
+ *	Kick off a soft reset of the velocity adapter and then poll
+ *	until the reset sequence has completed before returning.
+ */
+static int velocity_soft_reset(struct velocity_info *vptr)
+{
+	struct mac_regs __iomem *regs = vptr->mac_regs;
+	int i = 0;
+
+	writel(CR0_SFRST, &regs->CR0Set);
+
+	for (i = 0; i < W_MAX_TIMEOUT; i++) {
+		udelay(5);
+		if (!DWORD_REG_BITS_IS_ON(CR0_SFRST, &regs->CR0Set))
+			break;
+	}
+
+	if (i == W_MAX_TIMEOUT) {
+		writel(CR0_FORSRST, &regs->CR0Set);
+		/* FIXME: PCI POSTING */
+		/* delay 2ms */
+		mdelay(2);
+	}
+	return 0;
+}
+
+/**
+ *	velocity_set_multi	-	filter list change callback
+ *	@dev: network device
+ *
+ *	Called by the network layer when the filter lists need to change
+ *	for a velocity adapter. Reload the CAMs with the new address
+ *	filter ruleset.
+ */
+static void velocity_set_multi(struct net_device *dev)
+{
+	struct velocity_info *vptr = netdev_priv(dev);
+	struct mac_regs __iomem *regs = vptr->mac_regs;
+	u8 rx_mode;
+	int i;
+	struct netdev_hw_addr *ha;
+
+	if (dev->flags & IFF_PROMISC) {	/* Set promiscuous. */
+		writel(0xffffffff, &regs->MARCAM[0]);
+		writel(0xffffffff, &regs->MARCAM[4]);
+		rx_mode = (RCR_AM | RCR_AB | RCR_PROM);
+	} else if ((netdev_mc_count(dev) > vptr->multicast_limit) ||
+		   (dev->flags & IFF_ALLMULTI)) {
+		writel(0xffffffff, &regs->MARCAM[0]);
+		writel(0xffffffff, &regs->MARCAM[4]);
+		rx_mode = (RCR_AM | RCR_AB);
+	} else {
+		int offset = MCAM_SIZE - vptr->multicast_limit;
+		mac_get_cam_mask(regs, vptr->mCAMmask);
+
+		i = 0;
+		netdev_for_each_mc_addr(ha, dev) {
+			mac_set_cam(regs, i + offset, ha->addr);
+			vptr->mCAMmask[(offset + i) / 8] |= 1 << ((offset + i) & 7);
+			i++;
+		}
+
+		mac_set_cam_mask(regs, vptr->mCAMmask);
+		rx_mode = RCR_AM | RCR_AB | RCR_AP;
+	}
+	if (dev->mtu > 1500)
+		rx_mode |= RCR_AL;
+
+	BYTE_REG_BITS_ON(rx_mode, &regs->RCR);
+
+}
+
+/*
+ * MII access , media link mode setting functions
+ */
+
+/**
+ *	mii_init	-	set up MII
+ *	@vptr: velocity adapter
+ *	@mii_status:  links tatus
+ *
+ *	Set up the PHY for the current link state.
+ */
+static void mii_init(struct velocity_info *vptr, u32 mii_status)
+{
+	u16 BMCR;
+
+	switch (PHYID_GET_PHY_ID(vptr->phy_id)) {
+	case PHYID_ICPLUS_IP101A:
+		MII_REG_BITS_ON((ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP),
+						MII_ADVERTISE, vptr->mac_regs);
+		if (vptr->mii_status & VELOCITY_DUPLEX_FULL)
+			MII_REG_BITS_ON(TCSR_ECHODIS, MII_SREVISION,
+								vptr->mac_regs);
+		else
+			MII_REG_BITS_OFF(TCSR_ECHODIS, MII_SREVISION,
+								vptr->mac_regs);
+		MII_REG_BITS_ON(PLED_LALBE, MII_TPISTATUS, vptr->mac_regs);
+		break;
+	case PHYID_CICADA_CS8201:
+		/*
+		 *	Reset to hardware default
+		 */
+		MII_REG_BITS_OFF((ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP), MII_ADVERTISE, vptr->mac_regs);
+		/*
+		 *	Turn on ECHODIS bit in NWay-forced full mode and turn it
+		 *	off it in NWay-forced half mode for NWay-forced v.s.
+		 *	legacy-forced issue.
+		 */
+		if (vptr->mii_status & VELOCITY_DUPLEX_FULL)
+			MII_REG_BITS_ON(TCSR_ECHODIS, MII_SREVISION, vptr->mac_regs);
+		else
+			MII_REG_BITS_OFF(TCSR_ECHODIS, MII_SREVISION, vptr->mac_regs);
+		/*
+		 *	Turn on Link/Activity LED enable bit for CIS8201
+		 */
+		MII_REG_BITS_ON(PLED_LALBE, MII_TPISTATUS, vptr->mac_regs);
+		break;
+	case PHYID_VT3216_32BIT:
+	case PHYID_VT3216_64BIT:
+		/*
+		 *	Reset to hardware default
+		 */
+		MII_REG_BITS_ON((ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP), MII_ADVERTISE, vptr->mac_regs);
+		/*
+		 *	Turn on ECHODIS bit in NWay-forced full mode and turn it
+		 *	off it in NWay-forced half mode for NWay-forced v.s.
+		 *	legacy-forced issue
+		 */
+		if (vptr->mii_status & VELOCITY_DUPLEX_FULL)
+			MII_REG_BITS_ON(TCSR_ECHODIS, MII_SREVISION, vptr->mac_regs);
+		else
+			MII_REG_BITS_OFF(TCSR_ECHODIS, MII_SREVISION, vptr->mac_regs);
+		break;
+
+	case PHYID_MARVELL_1000:
+	case PHYID_MARVELL_1000S:
+		/*
+		 *	Assert CRS on Transmit
+		 */
+		MII_REG_BITS_ON(PSCR_ACRSTX, MII_REG_PSCR, vptr->mac_regs);
+		/*
+		 *	Reset to hardware default
+		 */
+		MII_REG_BITS_ON((ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP), MII_ADVERTISE, vptr->mac_regs);
+		break;
+	default:
+		;
+	}
+	velocity_mii_read(vptr->mac_regs, MII_BMCR, &BMCR);
+	if (BMCR & BMCR_ISOLATE) {
+		BMCR &= ~BMCR_ISOLATE;
+		velocity_mii_write(vptr->mac_regs, MII_BMCR, BMCR);
+	}
+}
+
+/**
+ * setup_queue_timers	-	Setup interrupt timers
+ *
+ * Setup interrupt frequency during suppression (timeout if the frame
+ * count isn't filled).
+ */
+static void setup_queue_timers(struct velocity_info *vptr)
+{
+	/* Only for newer revisions */
+	if (vptr->rev_id >= REV_ID_VT3216_A0) {
+		u8 txqueue_timer = 0;
+		u8 rxqueue_timer = 0;
+
+		if (vptr->mii_status & (VELOCITY_SPEED_1000 |
+				VELOCITY_SPEED_100)) {
+			txqueue_timer = vptr->options.txqueue_timer;
+			rxqueue_timer = vptr->options.rxqueue_timer;
+		}
+
+		writeb(txqueue_timer, &vptr->mac_regs->TQETMR);
+		writeb(rxqueue_timer, &vptr->mac_regs->RQETMR);
+	}
+}
+
+/**
+ * setup_adaptive_interrupts  -  Setup interrupt suppression
+ *
+ * @vptr velocity adapter
+ *
+ * The velocity is able to suppress interrupt during high interrupt load.
+ * This function turns on that feature.
+ */
+static void setup_adaptive_interrupts(struct velocity_info *vptr)
+{
+	struct mac_regs __iomem *regs = vptr->mac_regs;
+	u16 tx_intsup = vptr->options.tx_intsup;
+	u16 rx_intsup = vptr->options.rx_intsup;
+
+	/* Setup default interrupt mask (will be changed below) */
+	vptr->int_mask = INT_MASK_DEF;
+
+	/* Set Tx Interrupt Suppression Threshold */
+	writeb(CAMCR_PS0, &regs->CAMCR);
+	if (tx_intsup != 0) {
+		vptr->int_mask &= ~(ISR_PTXI | ISR_PTX0I | ISR_PTX1I |
+				ISR_PTX2I | ISR_PTX3I);
+		writew(tx_intsup, &regs->ISRCTL);
+	} else
+		writew(ISRCTL_TSUPDIS, &regs->ISRCTL);
+
+	/* Set Rx Interrupt Suppression Threshold */
+	writeb(CAMCR_PS1, &regs->CAMCR);
+	if (rx_intsup != 0) {
+		vptr->int_mask &= ~ISR_PRXI;
+		writew(rx_intsup, &regs->ISRCTL);
+	} else
+		writew(ISRCTL_RSUPDIS, &regs->ISRCTL);
+
+	/* Select page to interrupt hold timer */
+	writeb(0, &regs->CAMCR);
+}
+
+/**
+ *	velocity_init_registers	-	initialise MAC registers
+ *	@vptr: velocity to init
+ *	@type: type of initialisation (hot or cold)
+ *
+ *	Initialise the MAC on a reset or on first set up on the
+ *	hardware.
+ */
+static void velocity_init_registers(struct velocity_info *vptr,
+				    enum velocity_init_type type)
+{
+	struct mac_regs __iomem *regs = vptr->mac_regs;
+	struct net_device *netdev = vptr->netdev;
+	int i, mii_status;
+
+	mac_wol_reset(regs);
+
+	switch (type) {
+	case VELOCITY_INIT_RESET:
+	case VELOCITY_INIT_WOL:
+
+		netif_stop_queue(netdev);
+
+		/*
+		 *	Reset RX to prevent RX pointer not on the 4X location
+		 */
+		velocity_rx_reset(vptr);
+		mac_rx_queue_run(regs);
+		mac_rx_queue_wake(regs);
+
+		mii_status = velocity_get_opt_media_mode(vptr);
+		if (velocity_set_media_mode(vptr, mii_status) != VELOCITY_LINK_CHANGE) {
+			velocity_print_link_status(vptr);
+			if (!(vptr->mii_status & VELOCITY_LINK_FAIL))
+				netif_wake_queue(netdev);
+		}
+
+		enable_flow_control_ability(vptr);
+
+		mac_clear_isr(regs);
+		writel(CR0_STOP, &regs->CR0Clr);
+		writel((CR0_DPOLL | CR0_TXON | CR0_RXON | CR0_STRT),
+							&regs->CR0Set);
+
+		break;
+
+	case VELOCITY_INIT_COLD:
+	default:
+		/*
+		 *	Do reset
+		 */
+		velocity_soft_reset(vptr);
+		mdelay(5);
+
+		if (!vptr->no_eeprom) {
+			mac_eeprom_reload(regs);
+			for (i = 0; i < 6; i++)
+				writeb(netdev->dev_addr[i], regs->PAR + i);
+		}
+
+		/*
+		 *	clear Pre_ACPI bit.
+		 */
+		BYTE_REG_BITS_OFF(CFGA_PACPI, &(regs->CFGA));
+		mac_set_rx_thresh(regs, vptr->options.rx_thresh);
+		mac_set_dma_length(regs, vptr->options.DMA_length);
+
+		writeb(WOLCFG_SAM | WOLCFG_SAB, &regs->WOLCFGSet);
+		/*
+		 *	Back off algorithm use original IEEE standard
+		 */
+		BYTE_REG_BITS_SET(CFGB_OFSET, (CFGB_CRANDOM | CFGB_CAP | CFGB_MBA | CFGB_BAKOPT), &regs->CFGB);
+
+		/*
+		 *	Init CAM filter
+		 */
+		velocity_init_cam_filter(vptr);
+
+		/*
+		 *	Set packet filter: Receive directed and broadcast address
+		 */
+		velocity_set_multi(netdev);
+
+		/*
+		 *	Enable MII auto-polling
+		 */
+		enable_mii_autopoll(regs);
+
+		setup_adaptive_interrupts(vptr);
+
+		writel(vptr->rx.pool_dma, &regs->RDBaseLo);
+		writew(vptr->options.numrx - 1, &regs->RDCSize);
+		mac_rx_queue_run(regs);
+		mac_rx_queue_wake(regs);
+
+		writew(vptr->options.numtx - 1, &regs->TDCSize);
+
+		for (i = 0; i < vptr->tx.numq; i++) {
+			writel(vptr->tx.pool_dma[i], &regs->TDBaseLo[i]);
+			mac_tx_queue_run(regs, i);
+		}
+
+		init_flow_control_register(vptr);
+
+		writel(CR0_STOP, &regs->CR0Clr);
+		writel((CR0_DPOLL | CR0_TXON | CR0_RXON | CR0_STRT), &regs->CR0Set);
+
+		mii_status = velocity_get_opt_media_mode(vptr);
+		netif_stop_queue(netdev);
+
+		mii_init(vptr, mii_status);
+
+		if (velocity_set_media_mode(vptr, mii_status) != VELOCITY_LINK_CHANGE) {
+			velocity_print_link_status(vptr);
+			if (!(vptr->mii_status & VELOCITY_LINK_FAIL))
+				netif_wake_queue(netdev);
+		}
+
+		enable_flow_control_ability(vptr);
+		mac_hw_mibs_init(regs);
+		mac_write_int_mask(vptr->int_mask, regs);
+		mac_clear_isr(regs);
+
+	}
+}
+
+static void velocity_give_many_rx_descs(struct velocity_info *vptr)
+{
+	struct mac_regs __iomem *regs = vptr->mac_regs;
+	int avail, dirty, unusable;
+
+	/*
+	 * RD number must be equal to 4X per hardware spec
+	 * (programming guide rev 1.20, p.13)
+	 */
+	if (vptr->rx.filled < 4)
+		return;
+
+	wmb();
+
+	unusable = vptr->rx.filled & 0x0003;
+	dirty = vptr->rx.dirty - unusable;
+	for (avail = vptr->rx.filled & 0xfffc; avail; avail--) {
+		dirty = (dirty > 0) ? dirty - 1 : vptr->options.numrx - 1;
+		vptr->rx.ring[dirty].rdesc0.len |= OWNED_BY_NIC;
+	}
+
+	writew(vptr->rx.filled & 0xfffc, &regs->RBRDU);
+	vptr->rx.filled = unusable;
+}
+
+/**
+ *	velocity_init_dma_rings	-	set up DMA rings
+ *	@vptr: Velocity to set up
+ *
+ *	Allocate PCI mapped DMA rings for the receive and transmit layer
+ *	to use.
+ */
+static int velocity_init_dma_rings(struct velocity_info *vptr)
+{
+	struct velocity_opt *opt = &vptr->options;
+	const unsigned int rx_ring_size = opt->numrx * sizeof(struct rx_desc);
+	const unsigned int tx_ring_size = opt->numtx * sizeof(struct tx_desc);
+	dma_addr_t pool_dma;
+	void *pool;
+	unsigned int i;
+
+	/*
+	 * Allocate all RD/TD rings a single pool.
+	 *
+	 * dma_alloc_coherent() fulfills the requirement for 64 bytes
+	 * alignment
+	 */
+	pool = dma_alloc_coherent(vptr->dev, tx_ring_size * vptr->tx.numq +
+				    rx_ring_size, &pool_dma, GFP_ATOMIC);
+	if (!pool) {
+		dev_err(vptr->dev, "%s : DMA memory allocation failed.\n",
+			vptr->netdev->name);
+		return -ENOMEM;
+	}
+
+	vptr->rx.ring = pool;
+	vptr->rx.pool_dma = pool_dma;
+
+	pool += rx_ring_size;
+	pool_dma += rx_ring_size;
+
+	for (i = 0; i < vptr->tx.numq; i++) {
+		vptr->tx.rings[i] = pool;
+		vptr->tx.pool_dma[i] = pool_dma;
+		pool += tx_ring_size;
+		pool_dma += tx_ring_size;
+	}
+
+	return 0;
+}
+
+static void velocity_set_rxbufsize(struct velocity_info *vptr, int mtu)
+{
+	vptr->rx.buf_sz = (mtu <= ETH_DATA_LEN) ? PKT_BUF_SZ : mtu + 32;
+}
+
+/**
+ *	velocity_alloc_rx_buf	-	allocate aligned receive buffer
+ *	@vptr: velocity
+ *	@idx: ring index
+ *
+ *	Allocate a new full sized buffer for the reception of a frame and
+ *	map it into PCI space for the hardware to use. The hardware
+ *	requires *64* byte alignment of the buffer which makes life
+ *	less fun than would be ideal.
+ */
+static int velocity_alloc_rx_buf(struct velocity_info *vptr, int idx)
+{
+	struct rx_desc *rd = &(vptr->rx.ring[idx]);
+	struct velocity_rd_info *rd_info = &(vptr->rx.info[idx]);
+
+	rd_info->skb = netdev_alloc_skb(vptr->netdev, vptr->rx.buf_sz + 64);
+	if (rd_info->skb == NULL)
+		return -ENOMEM;
+
+	/*
+	 *	Do the gymnastics to get the buffer head for data at
+	 *	64byte alignment.
+	 */
+	skb_reserve(rd_info->skb,
+			64 - ((unsigned long) rd_info->skb->data & 63));
+	rd_info->skb_dma = dma_map_single(vptr->dev, rd_info->skb->data,
+					vptr->rx.buf_sz, DMA_FROM_DEVICE);
+
+	/*
+	 *	Fill in the descriptor to match
+	 */
+
+	*((u32 *) & (rd->rdesc0)) = 0;
+	rd->size = cpu_to_le16(vptr->rx.buf_sz) | RX_INTEN;
+	rd->pa_low = cpu_to_le32(rd_info->skb_dma);
+	rd->pa_high = 0;
+	return 0;
+}
+
+
+static int velocity_rx_refill(struct velocity_info *vptr)
+{
+	int dirty = vptr->rx.dirty, done = 0;
+
+	do {
+		struct rx_desc *rd = vptr->rx.ring + dirty;
+
+		/* Fine for an all zero Rx desc at init time as well */
+		if (rd->rdesc0.len & OWNED_BY_NIC)
+			break;
+
+		if (!vptr->rx.info[dirty].skb) {
+			if (velocity_alloc_rx_buf(vptr, dirty) < 0)
+				break;
+		}
+		done++;
+		dirty = (dirty < vptr->options.numrx - 1) ? dirty + 1 : 0;
+	} while (dirty != vptr->rx.curr);
+
+	if (done) {
+		vptr->rx.dirty = dirty;
+		vptr->rx.filled += done;
+	}
+
+	return done;
+}
+
+/**
+ *	velocity_free_rd_ring	-	free receive ring
+ *	@vptr: velocity to clean up
+ *
+ *	Free the receive buffers for each ring slot and any
+ *	attached socket buffers that need to go away.
+ */
+static void velocity_free_rd_ring(struct velocity_info *vptr)
+{
+	int i;
+
+	if (vptr->rx.info == NULL)
+		return;
+
+	for (i = 0; i < vptr->options.numrx; i++) {
+		struct velocity_rd_info *rd_info = &(vptr->rx.info[i]);
+		struct rx_desc *rd = vptr->rx.ring + i;
+
+		memset(rd, 0, sizeof(*rd));
+
+		if (!rd_info->skb)
+			continue;
+		dma_unmap_single(vptr->dev, rd_info->skb_dma, vptr->rx.buf_sz,
+				 DMA_FROM_DEVICE);
+		rd_info->skb_dma = 0;
+
+		dev_kfree_skb(rd_info->skb);
+		rd_info->skb = NULL;
+	}
+
+	kfree(vptr->rx.info);
+	vptr->rx.info = NULL;
+}
+
+/**
+ *	velocity_init_rd_ring	-	set up receive ring
+ *	@vptr: velocity to configure
+ *
+ *	Allocate and set up the receive buffers for each ring slot and
+ *	assign them to the network adapter.
+ */
+static int velocity_init_rd_ring(struct velocity_info *vptr)
+{
+	int ret = -ENOMEM;
+
+	vptr->rx.info = kcalloc(vptr->options.numrx,
+				sizeof(struct velocity_rd_info), GFP_KERNEL);
+	if (!vptr->rx.info)
+		goto out;
+
+	velocity_init_rx_ring_indexes(vptr);
+
+	if (velocity_rx_refill(vptr) != vptr->options.numrx) {
+		VELOCITY_PRT(MSG_LEVEL_ERR, KERN_ERR
+			"%s: failed to allocate RX buffer.\n", vptr->netdev->name);
+		velocity_free_rd_ring(vptr);
+		goto out;
+	}
+
+	ret = 0;
+out:
+	return ret;
+}
+
+/**
+ *	velocity_init_td_ring	-	set up transmit ring
+ *	@vptr:	velocity
+ *
+ *	Set up the transmit ring and chain the ring pointers together.
+ *	Returns zero on success or a negative posix errno code for
+ *	failure.
+ */
+static int velocity_init_td_ring(struct velocity_info *vptr)
+{
+	int j;
+
+	/* Init the TD ring entries */
+	for (j = 0; j < vptr->tx.numq; j++) {
+
+		vptr->tx.infos[j] = kcalloc(vptr->options.numtx,
+					    sizeof(struct velocity_td_info),
+					    GFP_KERNEL);
+		if (!vptr->tx.infos[j])	{
+			while (--j >= 0)
+				kfree(vptr->tx.infos[j]);
+			return -ENOMEM;
+		}
+
+		vptr->tx.tail[j] = vptr->tx.curr[j] = vptr->tx.used[j] = 0;
+	}
+	return 0;
+}
+
+/**
+ *	velocity_free_dma_rings	-	free PCI ring pointers
+ *	@vptr: Velocity to free from
+ *
+ *	Clean up the PCI ring buffers allocated to this velocity.
+ */
+static void velocity_free_dma_rings(struct velocity_info *vptr)
+{
+	const int size = vptr->options.numrx * sizeof(struct rx_desc) +
+		vptr->options.numtx * sizeof(struct tx_desc) * vptr->tx.numq;
+
+	dma_free_coherent(vptr->dev, size, vptr->rx.ring, vptr->rx.pool_dma);
+}
+
+static int velocity_init_rings(struct velocity_info *vptr, int mtu)
+{
+	int ret;
+
+	velocity_set_rxbufsize(vptr, mtu);
+
+	ret = velocity_init_dma_rings(vptr);
+	if (ret < 0)
+		goto out;
+
+	ret = velocity_init_rd_ring(vptr);
+	if (ret < 0)
+		goto err_free_dma_rings_0;
+
+	ret = velocity_init_td_ring(vptr);
+	if (ret < 0)
+		goto err_free_rd_ring_1;
+out:
+	return ret;
+
+err_free_rd_ring_1:
+	velocity_free_rd_ring(vptr);
+err_free_dma_rings_0:
+	velocity_free_dma_rings(vptr);
+	goto out;
+}
+
+/**
+ *	velocity_free_tx_buf	-	free transmit buffer
+ *	@vptr: velocity
+ *	@tdinfo: buffer
+ *
+ *	Release an transmit buffer. If the buffer was preallocated then
+ *	recycle it, if not then unmap the buffer.
+ */
+static void velocity_free_tx_buf(struct velocity_info *vptr,
+		struct velocity_td_info *tdinfo, struct tx_desc *td)
+{
+	struct sk_buff *skb = tdinfo->skb;
+
+	/*
+	 *	Don't unmap the pre-allocated tx_bufs
+	 */
+	if (tdinfo->skb_dma) {
+		int i;
+
+		for (i = 0; i < tdinfo->nskb_dma; i++) {
+			size_t pktlen = max_t(size_t, skb->len, ETH_ZLEN);
+
+			/* For scatter-gather */
+			if (skb_shinfo(skb)->nr_frags > 0)
+				pktlen = max_t(size_t, pktlen,
+						td->td_buf[i].size & ~TD_QUEUE);
+
+			dma_unmap_single(vptr->dev, tdinfo->skb_dma[i],
+					le16_to_cpu(pktlen), DMA_TO_DEVICE);
+		}
+	}
+	dev_kfree_skb_irq(skb);
+	tdinfo->skb = NULL;
+}
+
+/*
+ *	FIXME: could we merge this with velocity_free_tx_buf ?
+ */
+static void velocity_free_td_ring_entry(struct velocity_info *vptr,
+							 int q, int n)
+{
+	struct velocity_td_info *td_info = &(vptr->tx.infos[q][n]);
+	int i;
+
+	if (td_info == NULL)
+		return;
+
+	if (td_info->skb) {
+		for (i = 0; i < td_info->nskb_dma; i++) {
+			if (td_info->skb_dma[i]) {
+				dma_unmap_single(vptr->dev, td_info->skb_dma[i],
+					td_info->skb->len, DMA_TO_DEVICE);
+				td_info->skb_dma[i] = 0;
+			}
+		}
+		dev_kfree_skb(td_info->skb);
+		td_info->skb = NULL;
+	}
+}
+
+/**
+ *	velocity_free_td_ring	-	free td ring
+ *	@vptr: velocity
+ *
+ *	Free up the transmit ring for this particular velocity adapter.
+ *	We free the ring contents but not the ring itself.
+ */
+static void velocity_free_td_ring(struct velocity_info *vptr)
+{
+	int i, j;
+
+	for (j = 0; j < vptr->tx.numq; j++) {
+		if (vptr->tx.infos[j] == NULL)
+			continue;
+		for (i = 0; i < vptr->options.numtx; i++)
+			velocity_free_td_ring_entry(vptr, j, i);
+
+		kfree(vptr->tx.infos[j]);
+		vptr->tx.infos[j] = NULL;
+	}
+}
+
+static void velocity_free_rings(struct velocity_info *vptr)
+{
+	velocity_free_td_ring(vptr);
+	velocity_free_rd_ring(vptr);
+	velocity_free_dma_rings(vptr);
+}
+
+/**
+ *	velocity_error	-	handle error from controller
+ *	@vptr: velocity
+ *	@status: card status
+ *
+ *	Process an error report from the hardware and attempt to recover
+ *	the card itself. At the moment we cannot recover from some
+ *	theoretically impossible errors but this could be fixed using
+ *	the pci_device_failed logic to bounce the hardware
+ *
+ */
+static void velocity_error(struct velocity_info *vptr, int status)
+{
+
+	if (status & ISR_TXSTLI) {
+		struct mac_regs __iomem *regs = vptr->mac_regs;
+
+		printk(KERN_ERR "TD structure error TDindex=%hx\n", readw(&regs->TDIdx[0]));
+		BYTE_REG_BITS_ON(TXESR_TDSTR, &regs->TXESR);
+		writew(TRDCSR_RUN, &regs->TDCSRClr);
+		netif_stop_queue(vptr->netdev);
+
+		/* FIXME: port over the pci_device_failed code and use it
+		   here */
+	}
+
+	if (status & ISR_SRCI) {
+		struct mac_regs __iomem *regs = vptr->mac_regs;
+		int linked;
+
+		if (vptr->options.spd_dpx == SPD_DPX_AUTO) {
+			vptr->mii_status = check_connection_type(regs);
+
+			/*
+			 *	If it is a 3119, disable frame bursting in
+			 *	halfduplex mode and enable it in fullduplex
+			 *	 mode
+			 */
+			if (vptr->rev_id < REV_ID_VT3216_A0) {
+				if (vptr->mii_status & VELOCITY_DUPLEX_FULL)
+					BYTE_REG_BITS_ON(TCR_TB2BDIS, &regs->TCR);
+				else
+					BYTE_REG_BITS_OFF(TCR_TB2BDIS, &regs->TCR);
+			}
+			/*
+			 *	Only enable CD heart beat counter in 10HD mode
+			 */
+			if (!(vptr->mii_status & VELOCITY_DUPLEX_FULL) && (vptr->mii_status & VELOCITY_SPEED_10))
+				BYTE_REG_BITS_OFF(TESTCFG_HBDIS, &regs->TESTCFG);
+			else
+				BYTE_REG_BITS_ON(TESTCFG_HBDIS, &regs->TESTCFG);
+
+			setup_queue_timers(vptr);
+		}
+		/*
+		 *	Get link status from PHYSR0
+		 */
+		linked = readb(&regs->PHYSR0) & PHYSR0_LINKGD;
+
+		if (linked) {
+			vptr->mii_status &= ~VELOCITY_LINK_FAIL;
+			netif_carrier_on(vptr->netdev);
+		} else {
+			vptr->mii_status |= VELOCITY_LINK_FAIL;
+			netif_carrier_off(vptr->netdev);
+		}
+
+		velocity_print_link_status(vptr);
+		enable_flow_control_ability(vptr);
+
+		/*
+		 *	Re-enable auto-polling because SRCI will disable
+		 *	auto-polling
+		 */
+
+		enable_mii_autopoll(regs);
+
+		if (vptr->mii_status & VELOCITY_LINK_FAIL)
+			netif_stop_queue(vptr->netdev);
+		else
+			netif_wake_queue(vptr->netdev);
+
+	}
+	if (status & ISR_MIBFI)
+		velocity_update_hw_mibs(vptr);
+	if (status & ISR_LSTEI)
+		mac_rx_queue_wake(vptr->mac_regs);
+}
+
+/**
+ *	tx_srv		-	transmit interrupt service
+ *	@vptr; Velocity
+ *
+ *	Scan the queues looking for transmitted packets that
+ *	we can complete and clean up. Update any statistics as
+ *	necessary/
+ */
+static int velocity_tx_srv(struct velocity_info *vptr)
+{
+	struct tx_desc *td;
+	int qnum;
+	int full = 0;
+	int idx;
+	int works = 0;
+	struct velocity_td_info *tdinfo;
+	struct net_device_stats *stats = &vptr->netdev->stats;
+
+	for (qnum = 0; qnum < vptr->tx.numq; qnum++) {
+		for (idx = vptr->tx.tail[qnum]; vptr->tx.used[qnum] > 0;
+			idx = (idx + 1) % vptr->options.numtx) {
+
+			/*
+			 *	Get Tx Descriptor
+			 */
+			td = &(vptr->tx.rings[qnum][idx]);
+			tdinfo = &(vptr->tx.infos[qnum][idx]);
+
+			if (td->tdesc0.len & OWNED_BY_NIC)
+				break;
+
+			if ((works++ > 15))
+				break;
+
+			if (td->tdesc0.TSR & TSR0_TERR) {
+				stats->tx_errors++;
+				stats->tx_dropped++;
+				if (td->tdesc0.TSR & TSR0_CDH)
+					stats->tx_heartbeat_errors++;
+				if (td->tdesc0.TSR & TSR0_CRS)
+					stats->tx_carrier_errors++;
+				if (td->tdesc0.TSR & TSR0_ABT)
+					stats->tx_aborted_errors++;
+				if (td->tdesc0.TSR & TSR0_OWC)
+					stats->tx_window_errors++;
+			} else {
+				stats->tx_packets++;
+				stats->tx_bytes += tdinfo->skb->len;
+			}
+			velocity_free_tx_buf(vptr, tdinfo, td);
+			vptr->tx.used[qnum]--;
+		}
+		vptr->tx.tail[qnum] = idx;
+
+		if (AVAIL_TD(vptr, qnum) < 1)
+			full = 1;
+	}
+	/*
+	 *	Look to see if we should kick the transmit network
+	 *	layer for more work.
+	 */
+	if (netif_queue_stopped(vptr->netdev) && (full == 0) &&
+	    (!(vptr->mii_status & VELOCITY_LINK_FAIL))) {
+		netif_wake_queue(vptr->netdev);
+	}
+	return works;
+}
+
+/**
+ *	velocity_rx_csum	-	checksum process
+ *	@rd: receive packet descriptor
+ *	@skb: network layer packet buffer
+ *
+ *	Process the status bits for the received packet and determine
+ *	if the checksum was computed and verified by the hardware
+ */
+static inline void velocity_rx_csum(struct rx_desc *rd, struct sk_buff *skb)
+{
+	skb_checksum_none_assert(skb);
+
+	if (rd->rdesc1.CSM & CSM_IPKT) {
+		if (rd->rdesc1.CSM & CSM_IPOK) {
+			if ((rd->rdesc1.CSM & CSM_TCPKT) ||
+					(rd->rdesc1.CSM & CSM_UDPKT)) {
+				if (!(rd->rdesc1.CSM & CSM_TUPOK))
+					return;
+			}
+			skb->ip_summed = CHECKSUM_UNNECESSARY;
+		}
+	}
+}
+
+/**
+ *	velocity_rx_copy	-	in place Rx copy for small packets
+ *	@rx_skb: network layer packet buffer candidate
+ *	@pkt_size: received data size
+ *	@rd: receive packet descriptor
+ *	@dev: network device
+ *
+ *	Replace the current skb that is scheduled for Rx processing by a
+ *	shorter, immediately allocated skb, if the received packet is small
+ *	enough. This function returns a negative value if the received
+ *	packet is too big or if memory is exhausted.
+ */
+static int velocity_rx_copy(struct sk_buff **rx_skb, int pkt_size,
+			    struct velocity_info *vptr)
+{
+	int ret = -1;
+	if (pkt_size < rx_copybreak) {
+		struct sk_buff *new_skb;
+
+		new_skb = netdev_alloc_skb_ip_align(vptr->netdev, pkt_size);
+		if (new_skb) {
+			new_skb->ip_summed = rx_skb[0]->ip_summed;
+			skb_copy_from_linear_data(*rx_skb, new_skb->data, pkt_size);
+			*rx_skb = new_skb;
+			ret = 0;
+		}
+
+	}
+	return ret;
+}
+
+/**
+ *	velocity_iph_realign	-	IP header alignment
+ *	@vptr: velocity we are handling
+ *	@skb: network layer packet buffer
+ *	@pkt_size: received data size
+ *
+ *	Align IP header on a 2 bytes boundary. This behavior can be
+ *	configured by the user.
+ */
+static inline void velocity_iph_realign(struct velocity_info *vptr,
+					struct sk_buff *skb, int pkt_size)
+{
+	if (vptr->flags & VELOCITY_FLAGS_IP_ALIGN) {
+		memmove(skb->data + 2, skb->data, pkt_size);
+		skb_reserve(skb, 2);
+	}
+}
+
+/**
+ *	velocity_receive_frame	-	received packet processor
+ *	@vptr: velocity we are handling
+ *	@idx: ring index
+ *
+ *	A packet has arrived. We process the packet and if appropriate
+ *	pass the frame up the network stack
+ */
+static int velocity_receive_frame(struct velocity_info *vptr, int idx)
+{
+	struct net_device_stats *stats = &vptr->netdev->stats;
+	struct velocity_rd_info *rd_info = &(vptr->rx.info[idx]);
+	struct rx_desc *rd = &(vptr->rx.ring[idx]);
+	int pkt_len = le16_to_cpu(rd->rdesc0.len) & 0x3fff;
+	struct sk_buff *skb;
+
+	if (rd->rdesc0.RSR & (RSR_STP | RSR_EDP)) {
+		VELOCITY_PRT(MSG_LEVEL_VERBOSE, KERN_ERR " %s : the received frame spans multiple RDs.\n", vptr->netdev->name);
+		stats->rx_length_errors++;
+		return -EINVAL;
+	}
+
+	if (rd->rdesc0.RSR & RSR_MAR)
+		stats->multicast++;
+
+	skb = rd_info->skb;
+
+	dma_sync_single_for_cpu(vptr->dev, rd_info->skb_dma,
+				    vptr->rx.buf_sz, DMA_FROM_DEVICE);
+
+	/*
+	 *	Drop frame not meeting IEEE 802.3
+	 */
+
+	if (vptr->flags & VELOCITY_FLAGS_VAL_PKT_LEN) {
+		if (rd->rdesc0.RSR & RSR_RL) {
+			stats->rx_length_errors++;
+			return -EINVAL;
+		}
+	}
+
+	velocity_rx_csum(rd, skb);
+
+	if (velocity_rx_copy(&skb, pkt_len, vptr) < 0) {
+		velocity_iph_realign(vptr, skb, pkt_len);
+		rd_info->skb = NULL;
+		dma_unmap_single(vptr->dev, rd_info->skb_dma, vptr->rx.buf_sz,
+				 DMA_FROM_DEVICE);
+	} else {
+		dma_sync_single_for_device(vptr->dev, rd_info->skb_dma,
+					   vptr->rx.buf_sz, DMA_FROM_DEVICE);
+	}
+
+	skb_put(skb, pkt_len - 4);
+	skb->protocol = eth_type_trans(skb, vptr->netdev);
+
+	if (rd->rdesc0.RSR & RSR_DETAG) {
+		u16 vid = swab16(le16_to_cpu(rd->rdesc1.PQTAG));
+
+		__vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vid);
+	}
+	netif_receive_skb(skb);
+
+	stats->rx_bytes += pkt_len;
+	stats->rx_packets++;
+
+	return 0;
+}
+
+/**
+ *	velocity_rx_srv		-	service RX interrupt
+ *	@vptr: velocity
+ *
+ *	Walk the receive ring of the velocity adapter and remove
+ *	any received packets from the receive queue. Hand the ring
+ *	slots back to the adapter for reuse.
+ */
+static int velocity_rx_srv(struct velocity_info *vptr, int budget_left)
+{
+	struct net_device_stats *stats = &vptr->netdev->stats;
+	int rd_curr = vptr->rx.curr;
+	int works = 0;
+
+	while (works < budget_left) {
+		struct rx_desc *rd = vptr->rx.ring + rd_curr;
+
+		if (!vptr->rx.info[rd_curr].skb)
+			break;
+
+		if (rd->rdesc0.len & OWNED_BY_NIC)
+			break;
+
+		rmb();
+
+		/*
+		 *	Don't drop CE or RL error frame although RXOK is off
+		 */
+		if (rd->rdesc0.RSR & (RSR_RXOK | RSR_CE | RSR_RL)) {
+			if (velocity_receive_frame(vptr, rd_curr) < 0)
+				stats->rx_dropped++;
+		} else {
+			if (rd->rdesc0.RSR & RSR_CRC)
+				stats->rx_crc_errors++;
+			if (rd->rdesc0.RSR & RSR_FAE)
+				stats->rx_frame_errors++;
+
+			stats->rx_dropped++;
+		}
+
+		rd->size |= RX_INTEN;
+
+		rd_curr++;
+		if (rd_curr >= vptr->options.numrx)
+			rd_curr = 0;
+		works++;
+	}
+
+	vptr->rx.curr = rd_curr;
+
+	if ((works > 0) && (velocity_rx_refill(vptr) > 0))
+		velocity_give_many_rx_descs(vptr);
+
+	VAR_USED(stats);
+	return works;
+}
+
+static int velocity_poll(struct napi_struct *napi, int budget)
+{
+	struct velocity_info *vptr = container_of(napi,
+			struct velocity_info, napi);
+	unsigned int rx_done;
+	unsigned long flags;
+
+	/*
+	 * Do rx and tx twice for performance (taken from the VIA
+	 * out-of-tree driver).
+	 */
+	rx_done = velocity_rx_srv(vptr, budget);
+	spin_lock_irqsave(&vptr->lock, flags);
+	velocity_tx_srv(vptr);
+	/* If budget not fully consumed, exit the polling mode */
+	if (rx_done < budget) {
+		napi_complete(napi);
+		mac_enable_int(vptr->mac_regs);
+	}
+	spin_unlock_irqrestore(&vptr->lock, flags);
+
+	return rx_done;
+}
+
+/**
+ *	velocity_intr		-	interrupt callback
+ *	@irq: interrupt number
+ *	@dev_instance: interrupting device
+ *
+ *	Called whenever an interrupt is generated by the velocity
+ *	adapter IRQ line. We may not be the source of the interrupt
+ *	and need to identify initially if we are, and if not exit as
+ *	efficiently as possible.
+ */
+static irqreturn_t velocity_intr(int irq, void *dev_instance)
+{
+	struct net_device *dev = dev_instance;
+	struct velocity_info *vptr = netdev_priv(dev);
+	u32 isr_status;
+
+	spin_lock(&vptr->lock);
+	isr_status = mac_read_isr(vptr->mac_regs);
+
+	/* Not us ? */
+	if (isr_status == 0) {
+		spin_unlock(&vptr->lock);
+		return IRQ_NONE;
+	}
+
+	/* Ack the interrupt */
+	mac_write_isr(vptr->mac_regs, isr_status);
+
+	if (likely(napi_schedule_prep(&vptr->napi))) {
+		mac_disable_int(vptr->mac_regs);
+		__napi_schedule(&vptr->napi);
+	}
+
+	if (isr_status & (~(ISR_PRXI | ISR_PPRXI | ISR_PTXI | ISR_PPTXI)))
+		velocity_error(vptr, isr_status);
+
+	spin_unlock(&vptr->lock);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ *	velocity_open		-	interface activation callback
+ *	@dev: network layer device to open
+ *
+ *	Called when the network layer brings the interface up. Returns
+ *	a negative posix error code on failure, or zero on success.
+ *
+ *	All the ring allocation and set up is done on open for this
+ *	adapter to minimise memory usage when inactive
+ */
+static int velocity_open(struct net_device *dev)
+{
+	struct velocity_info *vptr = netdev_priv(dev);
+	int ret;
+
+	ret = velocity_init_rings(vptr, dev->mtu);
+	if (ret < 0)
+		goto out;
+
+	/* Ensure chip is running */
+	velocity_set_power_state(vptr, PCI_D0);
+
+	velocity_init_registers(vptr, VELOCITY_INIT_COLD);
+
+	ret = request_irq(dev->irq, velocity_intr, IRQF_SHARED,
+			  dev->name, dev);
+	if (ret < 0) {
+		/* Power down the chip */
+		velocity_set_power_state(vptr, PCI_D3hot);
+		velocity_free_rings(vptr);
+		goto out;
+	}
+
+	velocity_give_many_rx_descs(vptr);
+
+	mac_enable_int(vptr->mac_regs);
+	netif_start_queue(dev);
+	napi_enable(&vptr->napi);
+	vptr->flags |= VELOCITY_FLAGS_OPENED;
+out:
+	return ret;
+}
+
+/**
+ *	velocity_shutdown	-	shut down the chip
+ *	@vptr: velocity to deactivate
+ *
+ *	Shuts down the internal operations of the velocity and
+ *	disables interrupts, autopolling, transmit and receive
+ */
+static void velocity_shutdown(struct velocity_info *vptr)
+{
+	struct mac_regs __iomem *regs = vptr->mac_regs;
+	mac_disable_int(regs);
+	writel(CR0_STOP, &regs->CR0Set);
+	writew(0xFFFF, &regs->TDCSRClr);
+	writeb(0xFF, &regs->RDCSRClr);
+	safe_disable_mii_autopoll(regs);
+	mac_clear_isr(regs);
+}
+
+/**
+ *	velocity_change_mtu	-	MTU change callback
+ *	@dev: network device
+ *	@new_mtu: desired MTU
+ *
+ *	Handle requests from the networking layer for MTU change on
+ *	this interface. It gets called on a change by the network layer.
+ *	Return zero for success or negative posix error code.
+ */
+static int velocity_change_mtu(struct net_device *dev, int new_mtu)
+{
+	struct velocity_info *vptr = netdev_priv(dev);
+	int ret = 0;
+
+	if ((new_mtu < VELOCITY_MIN_MTU) || new_mtu > (VELOCITY_MAX_MTU)) {
+		VELOCITY_PRT(MSG_LEVEL_ERR, KERN_NOTICE "%s: Invalid MTU.\n",
+				vptr->netdev->name);
+		ret = -EINVAL;
+		goto out_0;
+	}
+
+	if (!netif_running(dev)) {
+		dev->mtu = new_mtu;
+		goto out_0;
+	}
+
+	if (dev->mtu != new_mtu) {
+		struct velocity_info *tmp_vptr;
+		unsigned long flags;
+		struct rx_info rx;
+		struct tx_info tx;
+
+		tmp_vptr = kzalloc(sizeof(*tmp_vptr), GFP_KERNEL);
+		if (!tmp_vptr) {
+			ret = -ENOMEM;
+			goto out_0;
+		}
+
+		tmp_vptr->netdev = dev;
+		tmp_vptr->pdev = vptr->pdev;
+		tmp_vptr->dev = vptr->dev;
+		tmp_vptr->options = vptr->options;
+		tmp_vptr->tx.numq = vptr->tx.numq;
+
+		ret = velocity_init_rings(tmp_vptr, new_mtu);
+		if (ret < 0)
+			goto out_free_tmp_vptr_1;
+
+		napi_disable(&vptr->napi);
+
+		spin_lock_irqsave(&vptr->lock, flags);
+
+		netif_stop_queue(dev);
+		velocity_shutdown(vptr);
+
+		rx = vptr->rx;
+		tx = vptr->tx;
+
+		vptr->rx = tmp_vptr->rx;
+		vptr->tx = tmp_vptr->tx;
+
+		tmp_vptr->rx = rx;
+		tmp_vptr->tx = tx;
+
+		dev->mtu = new_mtu;
+
+		velocity_init_registers(vptr, VELOCITY_INIT_COLD);
+
+		velocity_give_many_rx_descs(vptr);
+
+		napi_enable(&vptr->napi);
+
+		mac_enable_int(vptr->mac_regs);
+		netif_start_queue(dev);
+
+		spin_unlock_irqrestore(&vptr->lock, flags);
+
+		velocity_free_rings(tmp_vptr);
+
+out_free_tmp_vptr_1:
+		kfree(tmp_vptr);
+	}
+out_0:
+	return ret;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/**
+ *  velocity_poll_controller		-	Velocity Poll controller function
+ *  @dev: network device
+ *
+ *
+ *  Used by NETCONSOLE and other diagnostic tools to allow network I/P
+ *  with interrupts disabled.
+ */
+static void velocity_poll_controller(struct net_device *dev)
+{
+	disable_irq(dev->irq);
+	velocity_intr(dev->irq, dev);
+	enable_irq(dev->irq);
+}
+#endif
+
+/**
+ *	velocity_mii_ioctl		-	MII ioctl handler
+ *	@dev: network device
+ *	@ifr: the ifreq block for the ioctl
+ *	@cmd: the command
+ *
+ *	Process MII requests made via ioctl from the network layer. These
+ *	are used by tools like kudzu to interrogate the link state of the
+ *	hardware
+ */
+static int velocity_mii_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+	struct velocity_info *vptr = netdev_priv(dev);
+	struct mac_regs __iomem *regs = vptr->mac_regs;
+	unsigned long flags;
+	struct mii_ioctl_data *miidata = if_mii(ifr);
+	int err;
+
+	switch (cmd) {
+	case SIOCGMIIPHY:
+		miidata->phy_id = readb(&regs->MIIADR) & 0x1f;
+		break;
+	case SIOCGMIIREG:
+		if (velocity_mii_read(vptr->mac_regs, miidata->reg_num & 0x1f, &(miidata->val_out)) < 0)
+			return -ETIMEDOUT;
+		break;
+	case SIOCSMIIREG:
+		spin_lock_irqsave(&vptr->lock, flags);
+		err = velocity_mii_write(vptr->mac_regs, miidata->reg_num & 0x1f, miidata->val_in);
+		spin_unlock_irqrestore(&vptr->lock, flags);
+		check_connection_type(vptr->mac_regs);
+		if (err)
+			return err;
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+	return 0;
+}
+
+/**
+ *	velocity_ioctl		-	ioctl entry point
+ *	@dev: network device
+ *	@rq: interface request ioctl
+ *	@cmd: command code
+ *
+ *	Called when the user issues an ioctl request to the network
+ *	device in question. The velocity interface supports MII.
+ */
+static int velocity_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+	struct velocity_info *vptr = netdev_priv(dev);
+	int ret;
+
+	/* If we are asked for information and the device is power
+	   saving then we need to bring the device back up to talk to it */
+
+	if (!netif_running(dev))
+		velocity_set_power_state(vptr, PCI_D0);
+
+	switch (cmd) {
+	case SIOCGMIIPHY:	/* Get address of MII PHY in use. */
+	case SIOCGMIIREG:	/* Read MII PHY register. */
+	case SIOCSMIIREG:	/* Write to MII PHY register. */
+		ret = velocity_mii_ioctl(dev, rq, cmd);
+		break;
+
+	default:
+		ret = -EOPNOTSUPP;
+	}
+	if (!netif_running(dev))
+		velocity_set_power_state(vptr, PCI_D3hot);
+
+
+	return ret;
+}
+
+/**
+ *	velocity_get_status	-	statistics callback
+ *	@dev: network device
+ *
+ *	Callback from the network layer to allow driver statistics
+ *	to be resynchronized with hardware collected state. In the
+ *	case of the velocity we need to pull the MIB counters from
+ *	the hardware into the counters before letting the network
+ *	layer display them.
+ */
+static struct net_device_stats *velocity_get_stats(struct net_device *dev)
+{
+	struct velocity_info *vptr = netdev_priv(dev);
+
+	/* If the hardware is down, don't touch MII */
+	if (!netif_running(dev))
+		return &dev->stats;
+
+	spin_lock_irq(&vptr->lock);
+	velocity_update_hw_mibs(vptr);
+	spin_unlock_irq(&vptr->lock);
+
+	dev->stats.rx_packets = vptr->mib_counter[HW_MIB_ifRxAllPkts];
+	dev->stats.rx_errors = vptr->mib_counter[HW_MIB_ifRxErrorPkts];
+	dev->stats.rx_length_errors = vptr->mib_counter[HW_MIB_ifInRangeLengthErrors];
+
+//  unsigned long   rx_dropped;     /* no space in linux buffers    */
+	dev->stats.collisions = vptr->mib_counter[HW_MIB_ifTxEtherCollisions];
+	/* detailed rx_errors: */
+//  unsigned long   rx_length_errors;
+//  unsigned long   rx_over_errors;     /* receiver ring buff overflow  */
+	dev->stats.rx_crc_errors = vptr->mib_counter[HW_MIB_ifRxPktCRCE];
+//  unsigned long   rx_frame_errors;    /* recv'd frame alignment error */
+//  unsigned long   rx_fifo_errors;     /* recv'r fifo overrun      */
+//  unsigned long   rx_missed_errors;   /* receiver missed packet   */
+
+	/* detailed tx_errors */
+//  unsigned long   tx_fifo_errors;
+
+	return &dev->stats;
+}
+
+/**
+ *	velocity_close		-	close adapter callback
+ *	@dev: network device
+ *
+ *	Callback from the network layer when the velocity is being
+ *	deactivated by the network layer
+ */
+static int velocity_close(struct net_device *dev)
+{
+	struct velocity_info *vptr = netdev_priv(dev);
+
+	napi_disable(&vptr->napi);
+	netif_stop_queue(dev);
+	velocity_shutdown(vptr);
+
+	if (vptr->flags & VELOCITY_FLAGS_WOL_ENABLED)
+		velocity_get_ip(vptr);
+
+	free_irq(dev->irq, dev);
+
+	velocity_free_rings(vptr);
+
+	vptr->flags &= (~VELOCITY_FLAGS_OPENED);
+	return 0;
+}
+
+/**
+ *	velocity_xmit		-	transmit packet callback
+ *	@skb: buffer to transmit
+ *	@dev: network device
+ *
+ *	Called by the networ layer to request a packet is queued to
+ *	the velocity. Returns zero on success.
+ */
+static netdev_tx_t velocity_xmit(struct sk_buff *skb,
+				 struct net_device *dev)
+{
+	struct velocity_info *vptr = netdev_priv(dev);
+	int qnum = 0;
+	struct tx_desc *td_ptr;
+	struct velocity_td_info *tdinfo;
+	unsigned long flags;
+	int pktlen;
+	int index, prev;
+	int i = 0;
+
+	if (skb_padto(skb, ETH_ZLEN))
+		goto out;
+
+	/* The hardware can handle at most 7 memory segments, so merge
+	 * the skb if there are more */
+	if (skb_shinfo(skb)->nr_frags > 6 && __skb_linearize(skb)) {
+		dev_kfree_skb_any(skb);
+		return NETDEV_TX_OK;
+	}
+
+	pktlen = skb_shinfo(skb)->nr_frags == 0 ?
+			max_t(unsigned int, skb->len, ETH_ZLEN) :
+				skb_headlen(skb);
+
+	spin_lock_irqsave(&vptr->lock, flags);
+
+	index = vptr->tx.curr[qnum];
+	td_ptr = &(vptr->tx.rings[qnum][index]);
+	tdinfo = &(vptr->tx.infos[qnum][index]);
+
+	td_ptr->tdesc1.TCR = TCR0_TIC;
+	td_ptr->td_buf[0].size &= ~TD_QUEUE;
+
+	/*
+	 *	Map the linear network buffer into PCI space and
+	 *	add it to the transmit ring.
+	 */
+	tdinfo->skb = skb;
+	tdinfo->skb_dma[0] = dma_map_single(vptr->dev, skb->data, pktlen,
+								DMA_TO_DEVICE);
+	td_ptr->tdesc0.len = cpu_to_le16(pktlen);
+	td_ptr->td_buf[0].pa_low = cpu_to_le32(tdinfo->skb_dma[0]);
+	td_ptr->td_buf[0].pa_high = 0;
+	td_ptr->td_buf[0].size = cpu_to_le16(pktlen);
+
+	/* Handle fragments */
+	for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
+		const skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+
+		tdinfo->skb_dma[i + 1] = skb_frag_dma_map(vptr->dev,
+							  frag, 0,
+							  skb_frag_size(frag),
+							  DMA_TO_DEVICE);
+
+		td_ptr->td_buf[i + 1].pa_low = cpu_to_le32(tdinfo->skb_dma[i + 1]);
+		td_ptr->td_buf[i + 1].pa_high = 0;
+		td_ptr->td_buf[i + 1].size = cpu_to_le16(skb_frag_size(frag));
+	}
+	tdinfo->nskb_dma = i + 1;
+
+	td_ptr->tdesc1.cmd = TCPLS_NORMAL + (tdinfo->nskb_dma + 1) * 16;
+
+	if (skb_vlan_tag_present(skb)) {
+		td_ptr->tdesc1.vlan = cpu_to_le16(skb_vlan_tag_get(skb));
+		td_ptr->tdesc1.TCR |= TCR0_VETAG;
+	}
+
+	/*
+	 *	Handle hardware checksum
+	 */
+	if (skb->ip_summed == CHECKSUM_PARTIAL) {
+		const struct iphdr *ip = ip_hdr(skb);
+		if (ip->protocol == IPPROTO_TCP)
+			td_ptr->tdesc1.TCR |= TCR0_TCPCK;
+		else if (ip->protocol == IPPROTO_UDP)
+			td_ptr->tdesc1.TCR |= (TCR0_UDPCK);
+		td_ptr->tdesc1.TCR |= TCR0_IPCK;
+	}
+
+	prev = index - 1;
+	if (prev < 0)
+		prev = vptr->options.numtx - 1;
+	td_ptr->tdesc0.len |= OWNED_BY_NIC;
+	vptr->tx.used[qnum]++;
+	vptr->tx.curr[qnum] = (index + 1) % vptr->options.numtx;
+
+	if (AVAIL_TD(vptr, qnum) < 1)
+		netif_stop_queue(dev);
+
+	td_ptr = &(vptr->tx.rings[qnum][prev]);
+	td_ptr->td_buf[0].size |= TD_QUEUE;
+	mac_tx_queue_wake(vptr->mac_regs, qnum);
+
+	spin_unlock_irqrestore(&vptr->lock, flags);
+out:
+	return NETDEV_TX_OK;
+}
+
+static const struct net_device_ops velocity_netdev_ops = {
+	.ndo_open		= velocity_open,
+	.ndo_stop		= velocity_close,
+	.ndo_start_xmit		= velocity_xmit,
+	.ndo_get_stats		= velocity_get_stats,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address	= eth_mac_addr,
+	.ndo_set_rx_mode	= velocity_set_multi,
+	.ndo_change_mtu		= velocity_change_mtu,
+	.ndo_do_ioctl		= velocity_ioctl,
+	.ndo_vlan_rx_add_vid	= velocity_vlan_rx_add_vid,
+	.ndo_vlan_rx_kill_vid	= velocity_vlan_rx_kill_vid,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller = velocity_poll_controller,
+#endif
+};
+
+/**
+ *	velocity_init_info	-	init private data
+ *	@pdev: PCI device
+ *	@vptr: Velocity info
+ *	@info: Board type
+ *
+ *	Set up the initial velocity_info struct for the device that has been
+ *	discovered.
+ */
+static void velocity_init_info(struct velocity_info *vptr,
+				const struct velocity_info_tbl *info)
+{
+	vptr->chip_id = info->chip_id;
+	vptr->tx.numq = info->txqueue;
+	vptr->multicast_limit = MCAM_SIZE;
+	spin_lock_init(&vptr->lock);
+}
+
+/**
+ *	velocity_get_pci_info	-	retrieve PCI info for device
+ *	@vptr: velocity device
+ *	@pdev: PCI device it matches
+ *
+ *	Retrieve the PCI configuration space data that interests us from
+ *	the kernel PCI layer
+ */
+static int velocity_get_pci_info(struct velocity_info *vptr)
+{
+	struct pci_dev *pdev = vptr->pdev;
+
+	pci_set_master(pdev);
+
+	vptr->ioaddr = pci_resource_start(pdev, 0);
+	vptr->memaddr = pci_resource_start(pdev, 1);
+
+	if (!(pci_resource_flags(pdev, 0) & IORESOURCE_IO)) {
+		dev_err(&pdev->dev,
+			   "region #0 is not an I/O resource, aborting.\n");
+		return -EINVAL;
+	}
+
+	if ((pci_resource_flags(pdev, 1) & IORESOURCE_IO)) {
+		dev_err(&pdev->dev,
+			   "region #1 is an I/O resource, aborting.\n");
+		return -EINVAL;
+	}
+
+	if (pci_resource_len(pdev, 1) < VELOCITY_IO_SIZE) {
+		dev_err(&pdev->dev, "region #1 is too small.\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/**
+ *	velocity_get_platform_info - retrieve platform info for device
+ *	@vptr: velocity device
+ *	@pdev: platform device it matches
+ *
+ *	Retrieve the Platform configuration data that interests us
+ */
+static int velocity_get_platform_info(struct velocity_info *vptr)
+{
+	struct resource res;
+	int ret;
+
+	if (of_get_property(vptr->dev->of_node, "no-eeprom", NULL))
+		vptr->no_eeprom = 1;
+
+	ret = of_address_to_resource(vptr->dev->of_node, 0, &res);
+	if (ret) {
+		dev_err(vptr->dev, "unable to find memory address\n");
+		return ret;
+	}
+
+	vptr->memaddr = res.start;
+
+	if (resource_size(&res) < VELOCITY_IO_SIZE) {
+		dev_err(vptr->dev, "memory region is too small.\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/**
+ *	velocity_print_info	-	per driver data
+ *	@vptr: velocity
+ *
+ *	Print per driver data as the kernel driver finds Velocity
+ *	hardware
+ */
+static void velocity_print_info(struct velocity_info *vptr)
+{
+	struct net_device *dev = vptr->netdev;
+
+	printk(KERN_INFO "%s: %s\n", dev->name, get_chip_name(vptr->chip_id));
+	printk(KERN_INFO "%s: Ethernet Address: %pM\n",
+		dev->name, dev->dev_addr);
+}
+
+static u32 velocity_get_link(struct net_device *dev)
+{
+	struct velocity_info *vptr = netdev_priv(dev);
+	struct mac_regs __iomem *regs = vptr->mac_regs;
+	return BYTE_REG_BITS_IS_ON(PHYSR0_LINKGD, &regs->PHYSR0) ? 1 : 0;
+}
+
+/**
+ *	velocity_probe - set up discovered velocity device
+ *	@pdev: PCI device
+ *	@ent: PCI device table entry that matched
+ *	@bustype: bus that device is connected to
+ *
+ *	Configure a discovered adapter from scratch. Return a negative
+ *	errno error code on failure paths.
+ */
+static int velocity_probe(struct device *dev, int irq,
+			   const struct velocity_info_tbl *info,
+			   enum velocity_bus_type bustype)
+{
+	static int first = 1;
+	struct net_device *netdev;
+	int i;
+	const char *drv_string;
+	struct velocity_info *vptr;
+	struct mac_regs __iomem *regs;
+	int ret = -ENOMEM;
+
+	/* FIXME: this driver, like almost all other ethernet drivers,
+	 * can support more than MAX_UNITS.
+	 */
+	if (velocity_nics >= MAX_UNITS) {
+		dev_notice(dev, "already found %d NICs.\n", velocity_nics);
+		return -ENODEV;
+	}
+
+	netdev = alloc_etherdev(sizeof(struct velocity_info));
+	if (!netdev)
+		goto out;
+
+	/* Chain it all together */
+
+	SET_NETDEV_DEV(netdev, dev);
+	vptr = netdev_priv(netdev);
+
+	if (first) {
+		printk(KERN_INFO "%s Ver. %s\n",
+			VELOCITY_FULL_DRV_NAM, VELOCITY_VERSION);
+		printk(KERN_INFO "Copyright (c) 2002, 2003 VIA Networking Technologies, Inc.\n");
+		printk(KERN_INFO "Copyright (c) 2004 Red Hat Inc.\n");
+		first = 0;
+	}
+
+	netdev->irq = irq;
+	vptr->netdev = netdev;
+	vptr->dev = dev;
+
+	velocity_init_info(vptr, info);
+
+	if (bustype == BUS_PCI) {
+		vptr->pdev = to_pci_dev(dev);
+
+		ret = velocity_get_pci_info(vptr);
+		if (ret < 0)
+			goto err_free_dev;
+	} else {
+		vptr->pdev = NULL;
+		ret = velocity_get_platform_info(vptr);
+		if (ret < 0)
+			goto err_free_dev;
+	}
+
+	regs = ioremap(vptr->memaddr, VELOCITY_IO_SIZE);
+	if (regs == NULL) {
+		ret = -EIO;
+		goto err_free_dev;
+	}
+
+	vptr->mac_regs = regs;
+	vptr->rev_id = readb(&regs->rev_id);
+
+	mac_wol_reset(regs);
+
+	for (i = 0; i < 6; i++)
+		netdev->dev_addr[i] = readb(&regs->PAR[i]);
+
+
+	drv_string = dev_driver_string(dev);
+
+	velocity_get_options(&vptr->options, velocity_nics, drv_string);
+
+	/*
+	 *	Mask out the options cannot be set to the chip
+	 */
+
+	vptr->options.flags &= info->flags;
+
+	/*
+	 *	Enable the chip specified capbilities
+	 */
+
+	vptr->flags = vptr->options.flags | (info->flags & 0xFF000000UL);
+
+	vptr->wol_opts = vptr->options.wol_opts;
+	vptr->flags |= VELOCITY_FLAGS_WOL_ENABLED;
+
+	vptr->phy_id = MII_GET_PHY_ID(vptr->mac_regs);
+
+	netdev->netdev_ops = &velocity_netdev_ops;
+	netdev->ethtool_ops = &velocity_ethtool_ops;
+	netif_napi_add(netdev, &vptr->napi, velocity_poll,
+							VELOCITY_NAPI_WEIGHT);
+
+	netdev->hw_features = NETIF_F_IP_CSUM | NETIF_F_SG |
+			   NETIF_F_HW_VLAN_CTAG_TX;
+	netdev->features |= NETIF_F_HW_VLAN_CTAG_TX |
+			NETIF_F_HW_VLAN_CTAG_FILTER | NETIF_F_HW_VLAN_CTAG_RX |
+			NETIF_F_IP_CSUM;
+
+	ret = register_netdev(netdev);
+	if (ret < 0)
+		goto err_iounmap;
+
+	if (!velocity_get_link(netdev)) {
+		netif_carrier_off(netdev);
+		vptr->mii_status |= VELOCITY_LINK_FAIL;
+	}
+
+	velocity_print_info(vptr);
+	dev_set_drvdata(vptr->dev, netdev);
+
+	/* and leave the chip powered down */
+
+	velocity_set_power_state(vptr, PCI_D3hot);
+	velocity_nics++;
+out:
+	return ret;
+
+err_iounmap:
+	netif_napi_del(&vptr->napi);
+	iounmap(regs);
+err_free_dev:
+	free_netdev(netdev);
+	goto out;
+}
+
+/**
+ *	velocity_remove	- device unplug
+ *	@dev: device being removed
+ *
+ *	Device unload callback. Called on an unplug or on module
+ *	unload for each active device that is present. Disconnects
+ *	the device from the network layer and frees all the resources
+ */
+static int velocity_remove(struct device *dev)
+{
+	struct net_device *netdev = dev_get_drvdata(dev);
+	struct velocity_info *vptr = netdev_priv(netdev);
+
+	unregister_netdev(netdev);
+	netif_napi_del(&vptr->napi);
+	iounmap(vptr->mac_regs);
+	free_netdev(netdev);
+	velocity_nics--;
+
+	return 0;
+}
+
+static int velocity_pci_probe(struct pci_dev *pdev,
+			       const struct pci_device_id *ent)
+{
+	const struct velocity_info_tbl *info =
+					&chip_info_table[ent->driver_data];
+	int ret;
+
+	ret = pci_enable_device(pdev);
+	if (ret < 0)
+		return ret;
+
+	ret = pci_request_regions(pdev, VELOCITY_NAME);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "No PCI resources.\n");
+		goto fail1;
+	}
+
+	ret = velocity_probe(&pdev->dev, pdev->irq, info, BUS_PCI);
+	if (ret == 0)
+		return 0;
+
+	pci_release_regions(pdev);
+fail1:
+	pci_disable_device(pdev);
+	return ret;
+}
+
+static void velocity_pci_remove(struct pci_dev *pdev)
+{
+	velocity_remove(&pdev->dev);
+
+	pci_release_regions(pdev);
+	pci_disable_device(pdev);
+}
+
+static int velocity_platform_probe(struct platform_device *pdev)
+{
+	const struct of_device_id *of_id;
+	const struct velocity_info_tbl *info;
+	int irq;
+
+	of_id = of_match_device(velocity_of_ids, &pdev->dev);
+	if (!of_id)
+		return -EINVAL;
+	info = of_id->data;
+
+	irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
+	if (!irq)
+		return -EINVAL;
+
+	return velocity_probe(&pdev->dev, irq, info, BUS_PLATFORM);
+}
+
+static int velocity_platform_remove(struct platform_device *pdev)
+{
+	velocity_remove(&pdev->dev);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+/**
+ *	wol_calc_crc		-	WOL CRC
+ *	@pattern: data pattern
+ *	@mask_pattern: mask
+ *
+ *	Compute the wake on lan crc hashes for the packet header
+ *	we are interested in.
+ */
+static u16 wol_calc_crc(int size, u8 *pattern, u8 *mask_pattern)
+{
+	u16 crc = 0xFFFF;
+	u8 mask;
+	int i, j;
+
+	for (i = 0; i < size; i++) {
+		mask = mask_pattern[i];
+
+		/* Skip this loop if the mask equals to zero */
+		if (mask == 0x00)
+			continue;
+
+		for (j = 0; j < 8; j++) {
+			if ((mask & 0x01) == 0) {
+				mask >>= 1;
+				continue;
+			}
+			mask >>= 1;
+			crc = crc_ccitt(crc, &(pattern[i * 8 + j]), 1);
+		}
+	}
+	/*	Finally, invert the result once to get the correct data */
+	crc = ~crc;
+	return bitrev32(crc) >> 16;
+}
+
+/**
+ *	velocity_set_wol	-	set up for wake on lan
+ *	@vptr: velocity to set WOL status on
+ *
+ *	Set a card up for wake on lan either by unicast or by
+ *	ARP packet.
+ *
+ *	FIXME: check static buffer is safe here
+ */
+static int velocity_set_wol(struct velocity_info *vptr)
+{
+	struct mac_regs __iomem *regs = vptr->mac_regs;
+	enum speed_opt spd_dpx = vptr->options.spd_dpx;
+	static u8 buf[256];
+	int i;
+
+	static u32 mask_pattern[2][4] = {
+		{0x00203000, 0x000003C0, 0x00000000, 0x0000000}, /* ARP */
+		{0xfffff000, 0xffffffff, 0xffffffff, 0x000ffff}	 /* Magic Packet */
+	};
+
+	writew(0xFFFF, &regs->WOLCRClr);
+	writeb(WOLCFG_SAB | WOLCFG_SAM, &regs->WOLCFGSet);
+	writew(WOLCR_MAGIC_EN, &regs->WOLCRSet);
+
+	/*
+	   if (vptr->wol_opts & VELOCITY_WOL_PHY)
+	   writew((WOLCR_LINKON_EN|WOLCR_LINKOFF_EN), &regs->WOLCRSet);
+	 */
+
+	if (vptr->wol_opts & VELOCITY_WOL_UCAST)
+		writew(WOLCR_UNICAST_EN, &regs->WOLCRSet);
+
+	if (vptr->wol_opts & VELOCITY_WOL_ARP) {
+		struct arp_packet *arp = (struct arp_packet *) buf;
+		u16 crc;
+		memset(buf, 0, sizeof(struct arp_packet) + 7);
+
+		for (i = 0; i < 4; i++)
+			writel(mask_pattern[0][i], &regs->ByteMask[0][i]);
+
+		arp->type = htons(ETH_P_ARP);
+		arp->ar_op = htons(1);
+
+		memcpy(arp->ar_tip, vptr->ip_addr, 4);
+
+		crc = wol_calc_crc((sizeof(struct arp_packet) + 7) / 8, buf,
+				(u8 *) & mask_pattern[0][0]);
+
+		writew(crc, &regs->PatternCRC[0]);
+		writew(WOLCR_ARP_EN, &regs->WOLCRSet);
+	}
+
+	BYTE_REG_BITS_ON(PWCFG_WOLTYPE, &regs->PWCFGSet);
+	BYTE_REG_BITS_ON(PWCFG_LEGACY_WOLEN, &regs->PWCFGSet);
+
+	writew(0x0FFF, &regs->WOLSRClr);
+
+	if (spd_dpx == SPD_DPX_1000_FULL)
+		goto mac_done;
+
+	if (spd_dpx != SPD_DPX_AUTO)
+		goto advertise_done;
+
+	if (vptr->mii_status & VELOCITY_AUTONEG_ENABLE) {
+		if (PHYID_GET_PHY_ID(vptr->phy_id) == PHYID_CICADA_CS8201)
+			MII_REG_BITS_ON(AUXCR_MDPPS, MII_NCONFIG, vptr->mac_regs);
+
+		MII_REG_BITS_OFF(ADVERTISE_1000FULL | ADVERTISE_1000HALF, MII_CTRL1000, vptr->mac_regs);
+	}
+
+	if (vptr->mii_status & VELOCITY_SPEED_1000)
+		MII_REG_BITS_ON(BMCR_ANRESTART, MII_BMCR, vptr->mac_regs);
+
+advertise_done:
+	BYTE_REG_BITS_ON(CHIPGCR_FCMODE, &regs->CHIPGCR);
+
+	{
+		u8 GCR;
+		GCR = readb(&regs->CHIPGCR);
+		GCR = (GCR & ~CHIPGCR_FCGMII) | CHIPGCR_FCFDX;
+		writeb(GCR, &regs->CHIPGCR);
+	}
+
+mac_done:
+	BYTE_REG_BITS_OFF(ISR_PWEI, &regs->ISR);
+	/* Turn on SWPTAG just before entering power mode */
+	BYTE_REG_BITS_ON(STICKHW_SWPTAG, &regs->STICKHW);
+	/* Go to bed ..... */
+	BYTE_REG_BITS_ON((STICKHW_DS1 | STICKHW_DS0), &regs->STICKHW);
+
+	return 0;
+}
+
+/**
+ *	velocity_save_context	-	save registers
+ *	@vptr: velocity
+ *	@context: buffer for stored context
+ *
+ *	Retrieve the current configuration from the velocity hardware
+ *	and stash it in the context structure, for use by the context
+ *	restore functions. This allows us to save things we need across
+ *	power down states
+ */
+static void velocity_save_context(struct velocity_info *vptr, struct velocity_context *context)
+{
+	struct mac_regs __iomem *regs = vptr->mac_regs;
+	u16 i;
+	u8 __iomem *ptr = (u8 __iomem *)regs;
+
+	for (i = MAC_REG_PAR; i < MAC_REG_CR0_CLR; i += 4)
+		*((u32 *) (context->mac_reg + i)) = readl(ptr + i);
+
+	for (i = MAC_REG_MAR; i < MAC_REG_TDCSR_CLR; i += 4)
+		*((u32 *) (context->mac_reg + i)) = readl(ptr + i);
+
+	for (i = MAC_REG_RDBASE_LO; i < MAC_REG_FIFO_TEST0; i += 4)
+		*((u32 *) (context->mac_reg + i)) = readl(ptr + i);
+
+}
+
+static int velocity_suspend(struct device *dev)
+{
+	struct net_device *netdev = dev_get_drvdata(dev);
+	struct velocity_info *vptr = netdev_priv(netdev);
+	unsigned long flags;
+
+	if (!netif_running(vptr->netdev))
+		return 0;
+
+	netif_device_detach(vptr->netdev);
+
+	spin_lock_irqsave(&vptr->lock, flags);
+	if (vptr->pdev)
+		pci_save_state(vptr->pdev);
+
+	if (vptr->flags & VELOCITY_FLAGS_WOL_ENABLED) {
+		velocity_get_ip(vptr);
+		velocity_save_context(vptr, &vptr->context);
+		velocity_shutdown(vptr);
+		velocity_set_wol(vptr);
+		if (vptr->pdev)
+			pci_enable_wake(vptr->pdev, PCI_D3hot, 1);
+		velocity_set_power_state(vptr, PCI_D3hot);
+	} else {
+		velocity_save_context(vptr, &vptr->context);
+		velocity_shutdown(vptr);
+		if (vptr->pdev)
+			pci_disable_device(vptr->pdev);
+		velocity_set_power_state(vptr, PCI_D3hot);
+	}
+
+	spin_unlock_irqrestore(&vptr->lock, flags);
+	return 0;
+}
+
+/**
+ *	velocity_restore_context	-	restore registers
+ *	@vptr: velocity
+ *	@context: buffer for stored context
+ *
+ *	Reload the register configuration from the velocity context
+ *	created by velocity_save_context.
+ */
+static void velocity_restore_context(struct velocity_info *vptr, struct velocity_context *context)
+{
+	struct mac_regs __iomem *regs = vptr->mac_regs;
+	int i;
+	u8 __iomem *ptr = (u8 __iomem *)regs;
+
+	for (i = MAC_REG_PAR; i < MAC_REG_CR0_SET; i += 4)
+		writel(*((u32 *) (context->mac_reg + i)), ptr + i);
+
+	/* Just skip cr0 */
+	for (i = MAC_REG_CR1_SET; i < MAC_REG_CR0_CLR; i++) {
+		/* Clear */
+		writeb(~(*((u8 *) (context->mac_reg + i))), ptr + i + 4);
+		/* Set */
+		writeb(*((u8 *) (context->mac_reg + i)), ptr + i);
+	}
+
+	for (i = MAC_REG_MAR; i < MAC_REG_IMR; i += 4)
+		writel(*((u32 *) (context->mac_reg + i)), ptr + i);
+
+	for (i = MAC_REG_RDBASE_LO; i < MAC_REG_FIFO_TEST0; i += 4)
+		writel(*((u32 *) (context->mac_reg + i)), ptr + i);
+
+	for (i = MAC_REG_TDCSR_SET; i <= MAC_REG_RDCSR_SET; i++)
+		writeb(*((u8 *) (context->mac_reg + i)), ptr + i);
+}
+
+static int velocity_resume(struct device *dev)
+{
+	struct net_device *netdev = dev_get_drvdata(dev);
+	struct velocity_info *vptr = netdev_priv(netdev);
+	unsigned long flags;
+	int i;
+
+	if (!netif_running(vptr->netdev))
+		return 0;
+
+	velocity_set_power_state(vptr, PCI_D0);
+
+	if (vptr->pdev) {
+		pci_enable_wake(vptr->pdev, PCI_D0, 0);
+		pci_restore_state(vptr->pdev);
+	}
+
+	mac_wol_reset(vptr->mac_regs);
+
+	spin_lock_irqsave(&vptr->lock, flags);
+	velocity_restore_context(vptr, &vptr->context);
+	velocity_init_registers(vptr, VELOCITY_INIT_WOL);
+	mac_disable_int(vptr->mac_regs);
+
+	velocity_tx_srv(vptr);
+
+	for (i = 0; i < vptr->tx.numq; i++) {
+		if (vptr->tx.used[i])
+			mac_tx_queue_wake(vptr->mac_regs, i);
+	}
+
+	mac_enable_int(vptr->mac_regs);
+	spin_unlock_irqrestore(&vptr->lock, flags);
+	netif_device_attach(vptr->netdev);
+
+	return 0;
+}
+#endif	/* CONFIG_PM_SLEEP */
+
+static SIMPLE_DEV_PM_OPS(velocity_pm_ops, velocity_suspend, velocity_resume);
+
+/*
+ *	Definition for our device driver. The PCI layer interface
+ *	uses this to handle all our card discover and plugging
+ */
+static struct pci_driver velocity_pci_driver = {
+	.name		= VELOCITY_NAME,
+	.id_table	= velocity_pci_id_table,
+	.probe		= velocity_pci_probe,
+	.remove		= velocity_pci_remove,
+	.driver = {
+		.pm = &velocity_pm_ops,
+	},
+};
+
+static struct platform_driver velocity_platform_driver = {
+	.probe		= velocity_platform_probe,
+	.remove		= velocity_platform_remove,
+	.driver = {
+		.name = "via-velocity",
+		.of_match_table = velocity_of_ids,
+		.pm = &velocity_pm_ops,
+	},
+};
+
+/**
+ *	velocity_ethtool_up	-	pre hook for ethtool
+ *	@dev: network device
+ *
+ *	Called before an ethtool operation. We need to make sure the
+ *	chip is out of D3 state before we poke at it.
+ */
+static int velocity_ethtool_up(struct net_device *dev)
+{
+	struct velocity_info *vptr = netdev_priv(dev);
+	if (!netif_running(dev))
+		velocity_set_power_state(vptr, PCI_D0);
+	return 0;
+}
+
+/**
+ *	velocity_ethtool_down	-	post hook for ethtool
+ *	@dev: network device
+ *
+ *	Called after an ethtool operation. Restore the chip back to D3
+ *	state if it isn't running.
+ */
+static void velocity_ethtool_down(struct net_device *dev)
+{
+	struct velocity_info *vptr = netdev_priv(dev);
+	if (!netif_running(dev))
+		velocity_set_power_state(vptr, PCI_D3hot);
+}
+
+static int velocity_get_settings(struct net_device *dev,
+				 struct ethtool_cmd *cmd)
+{
+	struct velocity_info *vptr = netdev_priv(dev);
+	struct mac_regs __iomem *regs = vptr->mac_regs;
+	u32 status;
+	status = check_connection_type(vptr->mac_regs);
+
+	cmd->supported = SUPPORTED_TP |
+			SUPPORTED_Autoneg |
+			SUPPORTED_10baseT_Half |
+			SUPPORTED_10baseT_Full |
+			SUPPORTED_100baseT_Half |
+			SUPPORTED_100baseT_Full |
+			SUPPORTED_1000baseT_Half |
+			SUPPORTED_1000baseT_Full;
+
+	cmd->advertising = ADVERTISED_TP | ADVERTISED_Autoneg;
+	if (vptr->options.spd_dpx == SPD_DPX_AUTO) {
+		cmd->advertising |=
+			ADVERTISED_10baseT_Half |
+			ADVERTISED_10baseT_Full |
+			ADVERTISED_100baseT_Half |
+			ADVERTISED_100baseT_Full |
+			ADVERTISED_1000baseT_Half |
+			ADVERTISED_1000baseT_Full;
+	} else {
+		switch (vptr->options.spd_dpx) {
+		case SPD_DPX_1000_FULL:
+			cmd->advertising |= ADVERTISED_1000baseT_Full;
+			break;
+		case SPD_DPX_100_HALF:
+			cmd->advertising |= ADVERTISED_100baseT_Half;
+			break;
+		case SPD_DPX_100_FULL:
+			cmd->advertising |= ADVERTISED_100baseT_Full;
+			break;
+		case SPD_DPX_10_HALF:
+			cmd->advertising |= ADVERTISED_10baseT_Half;
+			break;
+		case SPD_DPX_10_FULL:
+			cmd->advertising |= ADVERTISED_10baseT_Full;
+			break;
+		default:
+			break;
+		}
+	}
+
+	if (status & VELOCITY_SPEED_1000)
+		ethtool_cmd_speed_set(cmd, SPEED_1000);
+	else if (status & VELOCITY_SPEED_100)
+		ethtool_cmd_speed_set(cmd, SPEED_100);
+	else
+		ethtool_cmd_speed_set(cmd, SPEED_10);
+
+	cmd->autoneg = (status & VELOCITY_AUTONEG_ENABLE) ? AUTONEG_ENABLE : AUTONEG_DISABLE;
+	cmd->port = PORT_TP;
+	cmd->transceiver = XCVR_INTERNAL;
+	cmd->phy_address = readb(&regs->MIIADR) & 0x1F;
+
+	if (status & VELOCITY_DUPLEX_FULL)
+		cmd->duplex = DUPLEX_FULL;
+	else
+		cmd->duplex = DUPLEX_HALF;
+
+	return 0;
+}
+
+static int velocity_set_settings(struct net_device *dev,
+				 struct ethtool_cmd *cmd)
+{
+	struct velocity_info *vptr = netdev_priv(dev);
+	u32 speed = ethtool_cmd_speed(cmd);
+	u32 curr_status;
+	u32 new_status = 0;
+	int ret = 0;
+
+	curr_status = check_connection_type(vptr->mac_regs);
+	curr_status &= (~VELOCITY_LINK_FAIL);
+
+	new_status |= ((cmd->autoneg) ? VELOCITY_AUTONEG_ENABLE : 0);
+	new_status |= ((speed == SPEED_1000) ? VELOCITY_SPEED_1000 : 0);
+	new_status |= ((speed == SPEED_100) ? VELOCITY_SPEED_100 : 0);
+	new_status |= ((speed == SPEED_10) ? VELOCITY_SPEED_10 : 0);
+	new_status |= ((cmd->duplex == DUPLEX_FULL) ? VELOCITY_DUPLEX_FULL : 0);
+
+	if ((new_status & VELOCITY_AUTONEG_ENABLE) &&
+	    (new_status != (curr_status | VELOCITY_AUTONEG_ENABLE))) {
+		ret = -EINVAL;
+	} else {
+		enum speed_opt spd_dpx;
+
+		if (new_status & VELOCITY_AUTONEG_ENABLE)
+			spd_dpx = SPD_DPX_AUTO;
+		else if ((new_status & VELOCITY_SPEED_1000) &&
+			 (new_status & VELOCITY_DUPLEX_FULL)) {
+			spd_dpx = SPD_DPX_1000_FULL;
+		} else if (new_status & VELOCITY_SPEED_100)
+			spd_dpx = (new_status & VELOCITY_DUPLEX_FULL) ?
+				SPD_DPX_100_FULL : SPD_DPX_100_HALF;
+		else if (new_status & VELOCITY_SPEED_10)
+			spd_dpx = (new_status & VELOCITY_DUPLEX_FULL) ?
+				SPD_DPX_10_FULL : SPD_DPX_10_HALF;
+		else
+			return -EOPNOTSUPP;
+
+		vptr->options.spd_dpx = spd_dpx;
+
+		velocity_set_media_mode(vptr, new_status);
+	}
+
+	return ret;
+}
+
+static void velocity_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+	struct velocity_info *vptr = netdev_priv(dev);
+
+	strlcpy(info->driver, VELOCITY_NAME, sizeof(info->driver));
+	strlcpy(info->version, VELOCITY_VERSION, sizeof(info->version));
+	if (vptr->pdev)
+		strlcpy(info->bus_info, pci_name(vptr->pdev),
+						sizeof(info->bus_info));
+	else
+		strlcpy(info->bus_info, "platform", sizeof(info->bus_info));
+}
+
+static void velocity_ethtool_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+	struct velocity_info *vptr = netdev_priv(dev);
+	wol->supported = WAKE_PHY | WAKE_MAGIC | WAKE_UCAST | WAKE_ARP;
+	wol->wolopts |= WAKE_MAGIC;
+	/*
+	   if (vptr->wol_opts & VELOCITY_WOL_PHY)
+		   wol.wolopts|=WAKE_PHY;
+			 */
+	if (vptr->wol_opts & VELOCITY_WOL_UCAST)
+		wol->wolopts |= WAKE_UCAST;
+	if (vptr->wol_opts & VELOCITY_WOL_ARP)
+		wol->wolopts |= WAKE_ARP;
+	memcpy(&wol->sopass, vptr->wol_passwd, 6);
+}
+
+static int velocity_ethtool_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+	struct velocity_info *vptr = netdev_priv(dev);
+
+	if (!(wol->wolopts & (WAKE_PHY | WAKE_MAGIC | WAKE_UCAST | WAKE_ARP)))
+		return -EFAULT;
+	vptr->wol_opts = VELOCITY_WOL_MAGIC;
+
+	/*
+	   if (wol.wolopts & WAKE_PHY) {
+	   vptr->wol_opts|=VELOCITY_WOL_PHY;
+	   vptr->flags |=VELOCITY_FLAGS_WOL_ENABLED;
+	   }
+	 */
+
+	if (wol->wolopts & WAKE_MAGIC) {
+		vptr->wol_opts |= VELOCITY_WOL_MAGIC;
+		vptr->flags |= VELOCITY_FLAGS_WOL_ENABLED;
+	}
+	if (wol->wolopts & WAKE_UCAST) {
+		vptr->wol_opts |= VELOCITY_WOL_UCAST;
+		vptr->flags |= VELOCITY_FLAGS_WOL_ENABLED;
+	}
+	if (wol->wolopts & WAKE_ARP) {
+		vptr->wol_opts |= VELOCITY_WOL_ARP;
+		vptr->flags |= VELOCITY_FLAGS_WOL_ENABLED;
+	}
+	memcpy(vptr->wol_passwd, wol->sopass, 6);
+	return 0;
+}
+
+static u32 velocity_get_msglevel(struct net_device *dev)
+{
+	return msglevel;
+}
+
+static void velocity_set_msglevel(struct net_device *dev, u32 value)
+{
+	 msglevel = value;
+}
+
+static int get_pending_timer_val(int val)
+{
+	int mult_bits = val >> 6;
+	int mult = 1;
+
+	switch (mult_bits)
+	{
+	case 1:
+		mult = 4; break;
+	case 2:
+		mult = 16; break;
+	case 3:
+		mult = 64; break;
+	case 0:
+	default:
+		break;
+	}
+
+	return (val & 0x3f) * mult;
+}
+
+static void set_pending_timer_val(int *val, u32 us)
+{
+	u8 mult = 0;
+	u8 shift = 0;
+
+	if (us >= 0x3f) {
+		mult = 1; /* mult with 4 */
+		shift = 2;
+	}
+	if (us >= 0x3f * 4) {
+		mult = 2; /* mult with 16 */
+		shift = 4;
+	}
+	if (us >= 0x3f * 16) {
+		mult = 3; /* mult with 64 */
+		shift = 6;
+	}
+
+	*val = (mult << 6) | ((us >> shift) & 0x3f);
+}
+
+
+static int velocity_get_coalesce(struct net_device *dev,
+		struct ethtool_coalesce *ecmd)
+{
+	struct velocity_info *vptr = netdev_priv(dev);
+
+	ecmd->tx_max_coalesced_frames = vptr->options.tx_intsup;
+	ecmd->rx_max_coalesced_frames = vptr->options.rx_intsup;
+
+	ecmd->rx_coalesce_usecs = get_pending_timer_val(vptr->options.rxqueue_timer);
+	ecmd->tx_coalesce_usecs = get_pending_timer_val(vptr->options.txqueue_timer);
+
+	return 0;
+}
+
+static int velocity_set_coalesce(struct net_device *dev,
+		struct ethtool_coalesce *ecmd)
+{
+	struct velocity_info *vptr = netdev_priv(dev);
+	int max_us = 0x3f * 64;
+	unsigned long flags;
+
+	/* 6 bits of  */
+	if (ecmd->tx_coalesce_usecs > max_us)
+		return -EINVAL;
+	if (ecmd->rx_coalesce_usecs > max_us)
+		return -EINVAL;
+
+	if (ecmd->tx_max_coalesced_frames > 0xff)
+		return -EINVAL;
+	if (ecmd->rx_max_coalesced_frames > 0xff)
+		return -EINVAL;
+
+	vptr->options.rx_intsup = ecmd->rx_max_coalesced_frames;
+	vptr->options.tx_intsup = ecmd->tx_max_coalesced_frames;
+
+	set_pending_timer_val(&vptr->options.rxqueue_timer,
+			ecmd->rx_coalesce_usecs);
+	set_pending_timer_val(&vptr->options.txqueue_timer,
+			ecmd->tx_coalesce_usecs);
+
+	/* Setup the interrupt suppression and queue timers */
+	spin_lock_irqsave(&vptr->lock, flags);
+	mac_disable_int(vptr->mac_regs);
+	setup_adaptive_interrupts(vptr);
+	setup_queue_timers(vptr);
+
+	mac_write_int_mask(vptr->int_mask, vptr->mac_regs);
+	mac_clear_isr(vptr->mac_regs);
+	mac_enable_int(vptr->mac_regs);
+	spin_unlock_irqrestore(&vptr->lock, flags);
+
+	return 0;
+}
+
+static const char velocity_gstrings[][ETH_GSTRING_LEN] = {
+	"rx_all",
+	"rx_ok",
+	"tx_ok",
+	"rx_error",
+	"rx_runt_ok",
+	"rx_runt_err",
+	"rx_64",
+	"tx_64",
+	"rx_65_to_127",
+	"tx_65_to_127",
+	"rx_128_to_255",
+	"tx_128_to_255",
+	"rx_256_to_511",
+	"tx_256_to_511",
+	"rx_512_to_1023",
+	"tx_512_to_1023",
+	"rx_1024_to_1518",
+	"tx_1024_to_1518",
+	"tx_ether_collisions",
+	"rx_crc_errors",
+	"rx_jumbo",
+	"tx_jumbo",
+	"rx_mac_control_frames",
+	"tx_mac_control_frames",
+	"rx_frame_alignement_errors",
+	"rx_long_ok",
+	"rx_long_err",
+	"tx_sqe_errors",
+	"rx_no_buf",
+	"rx_symbol_errors",
+	"in_range_length_errors",
+	"late_collisions"
+};
+
+static void velocity_get_strings(struct net_device *dev, u32 sset, u8 *data)
+{
+	switch (sset) {
+	case ETH_SS_STATS:
+		memcpy(data, *velocity_gstrings, sizeof(velocity_gstrings));
+		break;
+	}
+}
+
+static int velocity_get_sset_count(struct net_device *dev, int sset)
+{
+	switch (sset) {
+	case ETH_SS_STATS:
+		return ARRAY_SIZE(velocity_gstrings);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static void velocity_get_ethtool_stats(struct net_device *dev,
+				       struct ethtool_stats *stats, u64 *data)
+{
+	if (netif_running(dev)) {
+		struct velocity_info *vptr = netdev_priv(dev);
+		u32 *p = vptr->mib_counter;
+		int i;
+
+		spin_lock_irq(&vptr->lock);
+		velocity_update_hw_mibs(vptr);
+		spin_unlock_irq(&vptr->lock);
+
+		for (i = 0; i < ARRAY_SIZE(velocity_gstrings); i++)
+			*data++ = *p++;
+	}
+}
+
+static const struct ethtool_ops velocity_ethtool_ops = {
+	.get_settings		= velocity_get_settings,
+	.set_settings		= velocity_set_settings,
+	.get_drvinfo		= velocity_get_drvinfo,
+	.get_wol		= velocity_ethtool_get_wol,
+	.set_wol		= velocity_ethtool_set_wol,
+	.get_msglevel		= velocity_get_msglevel,
+	.set_msglevel		= velocity_set_msglevel,
+	.get_link		= velocity_get_link,
+	.get_strings		= velocity_get_strings,
+	.get_sset_count		= velocity_get_sset_count,
+	.get_ethtool_stats	= velocity_get_ethtool_stats,
+	.get_coalesce		= velocity_get_coalesce,
+	.set_coalesce		= velocity_set_coalesce,
+	.begin			= velocity_ethtool_up,
+	.complete		= velocity_ethtool_down
+};
+
+#if defined(CONFIG_PM) && defined(CONFIG_INET)
+static int velocity_netdev_event(struct notifier_block *nb, unsigned long notification, void *ptr)
+{
+	struct in_ifaddr *ifa = ptr;
+	struct net_device *dev = ifa->ifa_dev->dev;
+
+	if (dev_net(dev) == &init_net &&
+	    dev->netdev_ops == &velocity_netdev_ops)
+		velocity_get_ip(netdev_priv(dev));
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block velocity_inetaddr_notifier = {
+	.notifier_call	= velocity_netdev_event,
+};
+
+static void velocity_register_notifier(void)
+{
+	register_inetaddr_notifier(&velocity_inetaddr_notifier);
+}
+
+static void velocity_unregister_notifier(void)
+{
+	unregister_inetaddr_notifier(&velocity_inetaddr_notifier);
+}
+
+#else
+
+#define velocity_register_notifier()	do {} while (0)
+#define velocity_unregister_notifier()	do {} while (0)
+
+#endif	/* defined(CONFIG_PM) && defined(CONFIG_INET) */
+
+/**
+ *	velocity_init_module	-	load time function
+ *
+ *	Called when the velocity module is loaded. The PCI driver
+ *	is registered with the PCI layer, and in turn will call
+ *	the probe functions for each velocity adapter installed
+ *	in the system.
+ */
+static int __init velocity_init_module(void)
+{
+	int ret_pci, ret_platform;
+
+	velocity_register_notifier();
+
+	ret_pci = pci_register_driver(&velocity_pci_driver);
+	ret_platform = platform_driver_register(&velocity_platform_driver);
+
+	/* if both_registers failed, remove the notifier */
+	if ((ret_pci < 0) && (ret_platform < 0)) {
+		velocity_unregister_notifier();
+		return ret_pci;
+	}
+
+	return 0;
+}
+
+/**
+ *	velocity_cleanup	-	module unload
+ *
+ *	When the velocity hardware is unloaded this function is called.
+ *	It will clean up the notifiers and the unregister the PCI
+ *	driver interface for this hardware. This in turn cleans up
+ *	all discovered interfaces before returning from the function
+ */
+static void __exit velocity_cleanup_module(void)
+{
+	velocity_unregister_notifier();
+
+	pci_unregister_driver(&velocity_pci_driver);
+	platform_driver_unregister(&velocity_platform_driver);
+}
+
+module_init(velocity_init_module);
+module_exit(velocity_cleanup_module);
diff --git a/kernel/drivers/net/ethernet/via/via-velocity.h b/kernel/drivers/net/ethernet/via/via-velocity.h
new file mode 100644
index 000000000..9453bfa93
--- /dev/null
+++ b/kernel/drivers/net/ethernet/via/via-velocity.h
@@ -0,0 +1,1581 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This software may be redistributed and/or modified under
+ * the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * File: via-velocity.h
+ *
+ * Purpose: Header file to define driver's private structures.
+ *
+ * Author: Chuang Liang-Shing, AJ Jiang
+ *
+ * Date: Jan 24, 2003
+ */
+
+
+#ifndef VELOCITY_H
+#define VELOCITY_H
+
+#define VELOCITY_TX_CSUM_SUPPORT
+
+#define VELOCITY_NAME          "via-velocity"
+#define VELOCITY_FULL_DRV_NAM  "VIA Networking Velocity Family Gigabit Ethernet Adapter Driver"
+#define VELOCITY_VERSION       "1.15"
+
+#define VELOCITY_IO_SIZE	256
+#define VELOCITY_NAPI_WEIGHT	64
+
+#define PKT_BUF_SZ          1540
+
+#define MAX_UNITS           8
+#define OPTION_DEFAULT      { [0 ... MAX_UNITS-1] = -1}
+
+#define REV_ID_VT6110       (0)
+
+#define BYTE_REG_BITS_ON(x,p)       do { writeb(readb((p))|(x),(p));} while (0)
+#define WORD_REG_BITS_ON(x,p)       do { writew(readw((p))|(x),(p));} while (0)
+#define DWORD_REG_BITS_ON(x,p)      do { writel(readl((p))|(x),(p));} while (0)
+
+#define BYTE_REG_BITS_IS_ON(x,p)    (readb((p)) & (x))
+#define WORD_REG_BITS_IS_ON(x,p)    (readw((p)) & (x))
+#define DWORD_REG_BITS_IS_ON(x,p)   (readl((p)) & (x))
+
+#define BYTE_REG_BITS_OFF(x,p)      do { writeb(readb((p)) & (~(x)),(p));} while (0)
+#define WORD_REG_BITS_OFF(x,p)      do { writew(readw((p)) & (~(x)),(p));} while (0)
+#define DWORD_REG_BITS_OFF(x,p)     do { writel(readl((p)) & (~(x)),(p));} while (0)
+
+#define BYTE_REG_BITS_SET(x,m,p)    do { writeb( (readb((p)) & (~(m))) |(x),(p));} while (0)
+#define WORD_REG_BITS_SET(x,m,p)    do { writew( (readw((p)) & (~(m))) |(x),(p));} while (0)
+#define DWORD_REG_BITS_SET(x,m,p)   do { writel( (readl((p)) & (~(m)))|(x),(p));}  while (0)
+
+#define VAR_USED(p)     do {(p)=(p);} while (0)
+
+/*
+ * Purpose: Structures for MAX RX/TX descriptors.
+ */
+
+
+#define B_OWNED_BY_CHIP     1
+#define B_OWNED_BY_HOST     0
+
+/*
+ * Bits in the RSR0 register
+ */
+
+#define RSR_DETAG	cpu_to_le16(0x0080)
+#define RSR_SNTAG	cpu_to_le16(0x0040)
+#define RSR_RXER	cpu_to_le16(0x0020)
+#define RSR_RL		cpu_to_le16(0x0010)
+#define RSR_CE		cpu_to_le16(0x0008)
+#define RSR_FAE		cpu_to_le16(0x0004)
+#define RSR_CRC		cpu_to_le16(0x0002)
+#define RSR_VIDM	cpu_to_le16(0x0001)
+
+/*
+ * Bits in the RSR1 register
+ */
+
+#define RSR_RXOK	cpu_to_le16(0x8000) // rx OK
+#define RSR_PFT		cpu_to_le16(0x4000) // Perfect filtering address match
+#define RSR_MAR		cpu_to_le16(0x2000) // MAC accept multicast address packet
+#define RSR_BAR		cpu_to_le16(0x1000) // MAC accept broadcast address packet
+#define RSR_PHY		cpu_to_le16(0x0800) // MAC accept physical address packet
+#define RSR_VTAG	cpu_to_le16(0x0400) // 802.1p/1q tagging packet indicator
+#define RSR_STP		cpu_to_le16(0x0200) // start of packet
+#define RSR_EDP		cpu_to_le16(0x0100) // end of packet
+
+/*
+ * Bits in the CSM register
+ */
+
+#define CSM_IPOK            0x40	//IP Checksum validation ok
+#define CSM_TUPOK           0x20	//TCP/UDP Checksum validation ok
+#define CSM_FRAG            0x10	//Fragment IP datagram
+#define CSM_IPKT            0x04	//Received an IP packet
+#define CSM_TCPKT           0x02	//Received a TCP packet
+#define CSM_UDPKT           0x01	//Received a UDP packet
+
+/*
+ * Bits in the TSR0 register
+ */
+
+#define TSR0_ABT	cpu_to_le16(0x0080) // Tx abort because of excessive collision
+#define TSR0_OWT	cpu_to_le16(0x0040) // Jumbo frame Tx abort
+#define TSR0_OWC	cpu_to_le16(0x0020) // Out of window collision
+#define TSR0_COLS	cpu_to_le16(0x0010) // experience collision in this transmit event
+#define TSR0_NCR3	cpu_to_le16(0x0008) // collision retry counter[3]
+#define TSR0_NCR2	cpu_to_le16(0x0004) // collision retry counter[2]
+#define TSR0_NCR1	cpu_to_le16(0x0002) // collision retry counter[1]
+#define TSR0_NCR0	cpu_to_le16(0x0001) // collision retry counter[0]
+#define TSR0_TERR	cpu_to_le16(0x8000) //
+#define TSR0_FDX	cpu_to_le16(0x4000) // current transaction is serviced by full duplex mode
+#define TSR0_GMII	cpu_to_le16(0x2000) // current transaction is serviced by GMII mode
+#define TSR0_LNKFL	cpu_to_le16(0x1000) // packet serviced during link down
+#define TSR0_SHDN	cpu_to_le16(0x0400) // shutdown case
+#define TSR0_CRS	cpu_to_le16(0x0200) // carrier sense lost
+#define TSR0_CDH	cpu_to_le16(0x0100) // AQE test fail (CD heartbeat)
+
+//
+// Bits in the TCR0 register
+//
+#define TCR0_TIC            0x80	// assert interrupt immediately while descriptor has been send complete
+#define TCR0_PIC            0x40	// priority interrupt request, INA# is issued over adaptive interrupt scheme
+#define TCR0_VETAG          0x20	// enable VLAN tag
+#define TCR0_IPCK           0x10	// request IP  checksum calculation.
+#define TCR0_UDPCK          0x08	// request UDP checksum calculation.
+#define TCR0_TCPCK          0x04	// request TCP checksum calculation.
+#define TCR0_JMBO           0x02	// indicate a jumbo packet in GMAC side
+#define TCR0_CRC            0x01	// disable CRC generation
+
+#define TCPLS_NORMAL        3
+#define TCPLS_START         2
+#define TCPLS_END           1
+#define TCPLS_MED           0
+
+
+// max transmit or receive buffer size
+#define CB_RX_BUF_SIZE     2048UL	// max buffer size
+					// NOTE: must be multiple of 4
+
+#define CB_MAX_RD_NUM       512	// MAX # of RD
+#define CB_MAX_TD_NUM       256	// MAX # of TD
+
+#define CB_INIT_RD_NUM_3119 128	// init # of RD, for setup VT3119
+#define CB_INIT_TD_NUM_3119 64	// init # of TD, for setup VT3119
+
+#define CB_INIT_RD_NUM      128	// init # of RD, for setup default
+#define CB_INIT_TD_NUM      64	// init # of TD, for setup default
+
+// for 3119
+#define CB_TD_RING_NUM      4	// # of TD rings.
+#define CB_MAX_SEG_PER_PKT  7	// max data seg per packet (Tx)
+
+
+/*
+ *	If collisions excess 15 times , tx will abort, and
+ *	if tx fifo underflow, tx will fail
+ *	we should try to resend it
+ */
+
+#define CB_MAX_TX_ABORT_RETRY   3
+
+/*
+ *	Receive descriptor
+ */
+
+struct rdesc0 {
+	__le16 RSR;		/* Receive status */
+	__le16 len;		/* bits 0--13; bit 15 - owner */
+};
+
+struct rdesc1 {
+	__le16 PQTAG;
+	u8 CSM;
+	u8 IPKT;
+};
+
+enum {
+	RX_INTEN = cpu_to_le16(0x8000)
+};
+
+struct rx_desc {
+	struct rdesc0 rdesc0;
+	struct rdesc1 rdesc1;
+	__le32 pa_low;		/* Low 32 bit PCI address */
+	__le16 pa_high;		/* Next 16 bit PCI address (48 total) */
+	__le16 size;		/* bits 0--14 - frame size, bit 15 - enable int. */
+} __packed;
+
+/*
+ *	Transmit descriptor
+ */
+
+struct tdesc0 {
+	__le16 TSR;		/* Transmit status register */
+	__le16 len;		/* bits 0--13 - size of frame, bit 15 - owner */
+};
+
+struct tdesc1 {
+	__le16 vlan;
+	u8 TCR;
+	u8 cmd;			/* bits 0--1 - TCPLS, bits 4--7 - CMDZ */
+} __packed;
+
+enum {
+	TD_QUEUE = cpu_to_le16(0x8000)
+};
+
+struct td_buf {
+	__le32 pa_low;
+	__le16 pa_high;
+	__le16 size;		/* bits 0--13 - size, bit 15 - queue */
+} __packed;
+
+struct tx_desc {
+	struct tdesc0 tdesc0;
+	struct tdesc1 tdesc1;
+	struct td_buf td_buf[7];
+};
+
+struct velocity_rd_info {
+	struct sk_buff *skb;
+	dma_addr_t skb_dma;
+};
+
+/*
+ *	Used to track transmit side buffers.
+ */
+
+struct velocity_td_info {
+	struct sk_buff *skb;
+	int nskb_dma;
+	dma_addr_t skb_dma[7];
+};
+
+enum  velocity_owner {
+	OWNED_BY_HOST = 0,
+	OWNED_BY_NIC = cpu_to_le16(0x8000)
+};
+
+
+/*
+ *	MAC registers and macros.
+ */
+
+
+#define MCAM_SIZE           64
+#define VCAM_SIZE           64
+#define TX_QUEUE_NO         4
+
+#define MAX_HW_MIB_COUNTER  32
+#define VELOCITY_MIN_MTU    (64)
+#define VELOCITY_MAX_MTU    (9000)
+
+/*
+ *	Registers in the MAC
+ */
+
+#define MAC_REG_PAR         0x00	// physical address
+#define MAC_REG_RCR         0x06
+#define MAC_REG_TCR         0x07
+#define MAC_REG_CR0_SET     0x08
+#define MAC_REG_CR1_SET     0x09
+#define MAC_REG_CR2_SET     0x0A
+#define MAC_REG_CR3_SET     0x0B
+#define MAC_REG_CR0_CLR     0x0C
+#define MAC_REG_CR1_CLR     0x0D
+#define MAC_REG_CR2_CLR     0x0E
+#define MAC_REG_CR3_CLR     0x0F
+#define MAC_REG_MAR         0x10
+#define MAC_REG_CAM         0x10
+#define MAC_REG_DEC_BASE_HI 0x18
+#define MAC_REG_DBF_BASE_HI 0x1C
+#define MAC_REG_ISR_CTL     0x20
+#define MAC_REG_ISR_HOTMR   0x20
+#define MAC_REG_ISR_TSUPTHR 0x20
+#define MAC_REG_ISR_RSUPTHR 0x20
+#define MAC_REG_ISR_CTL1    0x21
+#define MAC_REG_TXE_SR      0x22
+#define MAC_REG_RXE_SR      0x23
+#define MAC_REG_ISR         0x24
+#define MAC_REG_ISR0        0x24
+#define MAC_REG_ISR1        0x25
+#define MAC_REG_ISR2        0x26
+#define MAC_REG_ISR3        0x27
+#define MAC_REG_IMR         0x28
+#define MAC_REG_IMR0        0x28
+#define MAC_REG_IMR1        0x29
+#define MAC_REG_IMR2        0x2A
+#define MAC_REG_IMR3        0x2B
+#define MAC_REG_TDCSR_SET   0x30
+#define MAC_REG_RDCSR_SET   0x32
+#define MAC_REG_TDCSR_CLR   0x34
+#define MAC_REG_RDCSR_CLR   0x36
+#define MAC_REG_RDBASE_LO   0x38
+#define MAC_REG_RDINDX      0x3C
+#define MAC_REG_TDBASE_LO   0x40
+#define MAC_REG_RDCSIZE     0x50
+#define MAC_REG_TDCSIZE     0x52
+#define MAC_REG_TDINDX      0x54
+#define MAC_REG_TDIDX0      0x54
+#define MAC_REG_TDIDX1      0x56
+#define MAC_REG_TDIDX2      0x58
+#define MAC_REG_TDIDX3      0x5A
+#define MAC_REG_PAUSE_TIMER 0x5C
+#define MAC_REG_RBRDU       0x5E
+#define MAC_REG_FIFO_TEST0  0x60
+#define MAC_REG_FIFO_TEST1  0x64
+#define MAC_REG_CAMADDR     0x68
+#define MAC_REG_CAMCR       0x69
+#define MAC_REG_GFTEST      0x6A
+#define MAC_REG_FTSTCMD     0x6B
+#define MAC_REG_MIICFG      0x6C
+#define MAC_REG_MIISR       0x6D
+#define MAC_REG_PHYSR0      0x6E
+#define MAC_REG_PHYSR1      0x6F
+#define MAC_REG_MIICR       0x70
+#define MAC_REG_MIIADR      0x71
+#define MAC_REG_MIIDATA     0x72
+#define MAC_REG_SOFT_TIMER0 0x74
+#define MAC_REG_SOFT_TIMER1 0x76
+#define MAC_REG_CFGA        0x78
+#define MAC_REG_CFGB        0x79
+#define MAC_REG_CFGC        0x7A
+#define MAC_REG_CFGD        0x7B
+#define MAC_REG_DCFG0       0x7C
+#define MAC_REG_DCFG1       0x7D
+#define MAC_REG_MCFG0       0x7E
+#define MAC_REG_MCFG1       0x7F
+
+#define MAC_REG_TBIST       0x80
+#define MAC_REG_RBIST       0x81
+#define MAC_REG_PMCC        0x82
+#define MAC_REG_STICKHW     0x83
+#define MAC_REG_MIBCR       0x84
+#define MAC_REG_EERSV       0x85
+#define MAC_REG_REVID       0x86
+#define MAC_REG_MIBREAD     0x88
+#define MAC_REG_BPMA        0x8C
+#define MAC_REG_EEWR_DATA   0x8C
+#define MAC_REG_BPMD_WR     0x8F
+#define MAC_REG_BPCMD       0x90
+#define MAC_REG_BPMD_RD     0x91
+#define MAC_REG_EECHKSUM    0x92
+#define MAC_REG_EECSR       0x93
+#define MAC_REG_EERD_DATA   0x94
+#define MAC_REG_EADDR       0x96
+#define MAC_REG_EMBCMD      0x97
+#define MAC_REG_JMPSR0      0x98
+#define MAC_REG_JMPSR1      0x99
+#define MAC_REG_JMPSR2      0x9A
+#define MAC_REG_JMPSR3      0x9B
+#define MAC_REG_CHIPGSR     0x9C
+#define MAC_REG_TESTCFG     0x9D
+#define MAC_REG_DEBUG       0x9E
+#define MAC_REG_CHIPGCR     0x9F	/* Chip Operation and Diagnostic Control */
+#define MAC_REG_WOLCR0_SET  0xA0
+#define MAC_REG_WOLCR1_SET  0xA1
+#define MAC_REG_PWCFG_SET   0xA2
+#define MAC_REG_WOLCFG_SET  0xA3
+#define MAC_REG_WOLCR0_CLR  0xA4
+#define MAC_REG_WOLCR1_CLR  0xA5
+#define MAC_REG_PWCFG_CLR   0xA6
+#define MAC_REG_WOLCFG_CLR  0xA7
+#define MAC_REG_WOLSR0_SET  0xA8
+#define MAC_REG_WOLSR1_SET  0xA9
+#define MAC_REG_WOLSR0_CLR  0xAC
+#define MAC_REG_WOLSR1_CLR  0xAD
+#define MAC_REG_PATRN_CRC0  0xB0
+#define MAC_REG_PATRN_CRC1  0xB2
+#define MAC_REG_PATRN_CRC2  0xB4
+#define MAC_REG_PATRN_CRC3  0xB6
+#define MAC_REG_PATRN_CRC4  0xB8
+#define MAC_REG_PATRN_CRC5  0xBA
+#define MAC_REG_PATRN_CRC6  0xBC
+#define MAC_REG_PATRN_CRC7  0xBE
+#define MAC_REG_BYTEMSK0_0  0xC0
+#define MAC_REG_BYTEMSK0_1  0xC4
+#define MAC_REG_BYTEMSK0_2  0xC8
+#define MAC_REG_BYTEMSK0_3  0xCC
+#define MAC_REG_BYTEMSK1_0  0xD0
+#define MAC_REG_BYTEMSK1_1  0xD4
+#define MAC_REG_BYTEMSK1_2  0xD8
+#define MAC_REG_BYTEMSK1_3  0xDC
+#define MAC_REG_BYTEMSK2_0  0xE0
+#define MAC_REG_BYTEMSK2_1  0xE4
+#define MAC_REG_BYTEMSK2_2  0xE8
+#define MAC_REG_BYTEMSK2_3  0xEC
+#define MAC_REG_BYTEMSK3_0  0xF0
+#define MAC_REG_BYTEMSK3_1  0xF4
+#define MAC_REG_BYTEMSK3_2  0xF8
+#define MAC_REG_BYTEMSK3_3  0xFC
+
+/*
+ *	Bits in the RCR register
+ */
+
+#define RCR_AS              0x80
+#define RCR_AP              0x40
+#define RCR_AL              0x20
+#define RCR_PROM            0x10
+#define RCR_AB              0x08
+#define RCR_AM              0x04
+#define RCR_AR              0x02
+#define RCR_SEP             0x01
+
+/*
+ *	Bits in the TCR register
+ */
+
+#define TCR_TB2BDIS         0x80
+#define TCR_COLTMC1         0x08
+#define TCR_COLTMC0         0x04
+#define TCR_LB1             0x02	/* loopback[1] */
+#define TCR_LB0             0x01	/* loopback[0] */
+
+/*
+ *	Bits in the CR0 register
+ */
+
+#define CR0_TXON            0x00000008UL
+#define CR0_RXON            0x00000004UL
+#define CR0_STOP            0x00000002UL	/* stop MAC, default = 1 */
+#define CR0_STRT            0x00000001UL	/* start MAC */
+#define CR0_SFRST           0x00008000UL	/* software reset */
+#define CR0_TM1EN           0x00004000UL
+#define CR0_TM0EN           0x00002000UL
+#define CR0_DPOLL           0x00000800UL	/* disable rx/tx auto polling */
+#define CR0_DISAU           0x00000100UL
+#define CR0_XONEN           0x00800000UL
+#define CR0_FDXTFCEN        0x00400000UL	/* full-duplex TX flow control enable */
+#define CR0_FDXRFCEN        0x00200000UL	/* full-duplex RX flow control enable */
+#define CR0_HDXFCEN         0x00100000UL	/* half-duplex flow control enable */
+#define CR0_XHITH1          0x00080000UL	/* TX XON high threshold 1 */
+#define CR0_XHITH0          0x00040000UL	/* TX XON high threshold 0 */
+#define CR0_XLTH1           0x00020000UL	/* TX pause frame low threshold 1 */
+#define CR0_XLTH0           0x00010000UL	/* TX pause frame low threshold 0 */
+#define CR0_GSPRST          0x80000000UL
+#define CR0_FORSRST         0x40000000UL
+#define CR0_FPHYRST         0x20000000UL
+#define CR0_DIAG            0x10000000UL
+#define CR0_INTPCTL         0x04000000UL
+#define CR0_GINTMSK1        0x02000000UL
+#define CR0_GINTMSK0        0x01000000UL
+
+/*
+ *	Bits in the CR1 register
+ */
+
+#define CR1_SFRST           0x80	/* software reset */
+#define CR1_TM1EN           0x40
+#define CR1_TM0EN           0x20
+#define CR1_DPOLL           0x08	/* disable rx/tx auto polling */
+#define CR1_DISAU           0x01
+
+/*
+ *	Bits in the CR2 register
+ */
+
+#define CR2_XONEN           0x80
+#define CR2_FDXTFCEN        0x40	/* full-duplex TX flow control enable */
+#define CR2_FDXRFCEN        0x20	/* full-duplex RX flow control enable */
+#define CR2_HDXFCEN         0x10	/* half-duplex flow control enable */
+#define CR2_XHITH1          0x08	/* TX XON high threshold 1 */
+#define CR2_XHITH0          0x04	/* TX XON high threshold 0 */
+#define CR2_XLTH1           0x02	/* TX pause frame low threshold 1 */
+#define CR2_XLTH0           0x01	/* TX pause frame low threshold 0 */
+
+/*
+ *	Bits in the CR3 register
+ */
+
+#define CR3_GSPRST          0x80
+#define CR3_FORSRST         0x40
+#define CR3_FPHYRST         0x20
+#define CR3_DIAG            0x10
+#define CR3_INTPCTL         0x04
+#define CR3_GINTMSK1        0x02
+#define CR3_GINTMSK0        0x01
+
+#define ISRCTL_UDPINT       0x8000
+#define ISRCTL_TSUPDIS      0x4000
+#define ISRCTL_RSUPDIS      0x2000
+#define ISRCTL_PMSK1        0x1000
+#define ISRCTL_PMSK0        0x0800
+#define ISRCTL_INTPD        0x0400
+#define ISRCTL_HCRLD        0x0200
+#define ISRCTL_SCRLD        0x0100
+
+/*
+ *	Bits in the ISR_CTL1 register
+ */
+
+#define ISRCTL1_UDPINT      0x80
+#define ISRCTL1_TSUPDIS     0x40
+#define ISRCTL1_RSUPDIS     0x20
+#define ISRCTL1_PMSK1       0x10
+#define ISRCTL1_PMSK0       0x08
+#define ISRCTL1_INTPD       0x04
+#define ISRCTL1_HCRLD       0x02
+#define ISRCTL1_SCRLD       0x01
+
+/*
+ *	Bits in the TXE_SR register
+ */
+
+#define TXESR_TFDBS         0x08
+#define TXESR_TDWBS         0x04
+#define TXESR_TDRBS         0x02
+#define TXESR_TDSTR         0x01
+
+/*
+ *	Bits in the RXE_SR register
+ */
+
+#define RXESR_RFDBS         0x08
+#define RXESR_RDWBS         0x04
+#define RXESR_RDRBS         0x02
+#define RXESR_RDSTR         0x01
+
+/*
+ *	Bits in the ISR register
+ */
+
+#define ISR_ISR3            0x80000000UL
+#define ISR_ISR2            0x40000000UL
+#define ISR_ISR1            0x20000000UL
+#define ISR_ISR0            0x10000000UL
+#define ISR_TXSTLI          0x02000000UL
+#define ISR_RXSTLI          0x01000000UL
+#define ISR_HFLD            0x00800000UL
+#define ISR_UDPI            0x00400000UL
+#define ISR_MIBFI           0x00200000UL
+#define ISR_SHDNI           0x00100000UL
+#define ISR_PHYI            0x00080000UL
+#define ISR_PWEI            0x00040000UL
+#define ISR_TMR1I           0x00020000UL
+#define ISR_TMR0I           0x00010000UL
+#define ISR_SRCI            0x00008000UL
+#define ISR_LSTPEI          0x00004000UL
+#define ISR_LSTEI           0x00002000UL
+#define ISR_OVFI            0x00001000UL
+#define ISR_FLONI           0x00000800UL
+#define ISR_RACEI           0x00000400UL
+#define ISR_TXWB1I          0x00000200UL
+#define ISR_TXWB0I          0x00000100UL
+#define ISR_PTX3I           0x00000080UL
+#define ISR_PTX2I           0x00000040UL
+#define ISR_PTX1I           0x00000020UL
+#define ISR_PTX0I           0x00000010UL
+#define ISR_PTXI            0x00000008UL
+#define ISR_PRXI            0x00000004UL
+#define ISR_PPTXI           0x00000002UL
+#define ISR_PPRXI           0x00000001UL
+
+/*
+ *	Bits in the IMR register
+ */
+
+#define IMR_TXSTLM          0x02000000UL
+#define IMR_UDPIM           0x00400000UL
+#define IMR_MIBFIM          0x00200000UL
+#define IMR_SHDNIM          0x00100000UL
+#define IMR_PHYIM           0x00080000UL
+#define IMR_PWEIM           0x00040000UL
+#define IMR_TMR1IM          0x00020000UL
+#define IMR_TMR0IM          0x00010000UL
+
+#define IMR_SRCIM           0x00008000UL
+#define IMR_LSTPEIM         0x00004000UL
+#define IMR_LSTEIM          0x00002000UL
+#define IMR_OVFIM           0x00001000UL
+#define IMR_FLONIM          0x00000800UL
+#define IMR_RACEIM          0x00000400UL
+#define IMR_TXWB1IM         0x00000200UL
+#define IMR_TXWB0IM         0x00000100UL
+
+#define IMR_PTX3IM          0x00000080UL
+#define IMR_PTX2IM          0x00000040UL
+#define IMR_PTX1IM          0x00000020UL
+#define IMR_PTX0IM          0x00000010UL
+#define IMR_PTXIM           0x00000008UL
+#define IMR_PRXIM           0x00000004UL
+#define IMR_PPTXIM          0x00000002UL
+#define IMR_PPRXIM          0x00000001UL
+
+/* 0x0013FB0FUL  =  initial value of IMR */
+
+#define INT_MASK_DEF        (IMR_PPTXIM|IMR_PPRXIM|IMR_PTXIM|IMR_PRXIM|\
+                            IMR_PWEIM|IMR_TXWB0IM|IMR_TXWB1IM|IMR_FLONIM|\
+                            IMR_OVFIM|IMR_LSTEIM|IMR_LSTPEIM|IMR_SRCIM|IMR_MIBFIM|\
+                            IMR_SHDNIM|IMR_TMR1IM|IMR_TMR0IM|IMR_TXSTLM)
+
+/*
+ *	Bits in the TDCSR0/1, RDCSR0 register
+ */
+
+#define TRDCSR_DEAD         0x0008
+#define TRDCSR_WAK          0x0004
+#define TRDCSR_ACT          0x0002
+#define TRDCSR_RUN	    0x0001
+
+/*
+ *	Bits in the CAMADDR register
+ */
+
+#define CAMADDR_CAMEN       0x80
+#define CAMADDR_VCAMSL      0x40
+
+/*
+ *	Bits in the CAMCR register
+ */
+
+#define CAMCR_PS1           0x80
+#define CAMCR_PS0           0x40
+#define CAMCR_AITRPKT       0x20
+#define CAMCR_AITR16        0x10
+#define CAMCR_CAMRD         0x08
+#define CAMCR_CAMWR         0x04
+#define CAMCR_PS_CAM_MASK   0x40
+#define CAMCR_PS_CAM_DATA   0x80
+#define CAMCR_PS_MAR        0x00
+
+/*
+ *	Bits in the MIICFG register
+ */
+
+#define MIICFG_MPO1         0x80
+#define MIICFG_MPO0         0x40
+#define MIICFG_MFDC         0x20
+
+/*
+ *	Bits in the MIISR register
+ */
+
+#define MIISR_MIDLE         0x80
+
+/*
+ *	 Bits in the PHYSR0 register
+ */
+
+#define PHYSR0_PHYRST       0x80
+#define PHYSR0_LINKGD       0x40
+#define PHYSR0_FDPX         0x10
+#define PHYSR0_SPDG         0x08
+#define PHYSR0_SPD10        0x04
+#define PHYSR0_RXFLC        0x02
+#define PHYSR0_TXFLC        0x01
+
+/*
+ *	Bits in the PHYSR1 register
+ */
+
+#define PHYSR1_PHYTBI       0x01
+
+/*
+ *	Bits in the MIICR register
+ */
+
+#define MIICR_MAUTO         0x80
+#define MIICR_RCMD          0x40
+#define MIICR_WCMD          0x20
+#define MIICR_MDPM          0x10
+#define MIICR_MOUT          0x08
+#define MIICR_MDO           0x04
+#define MIICR_MDI           0x02
+#define MIICR_MDC           0x01
+
+/*
+ *	Bits in the MIIADR register
+ */
+
+#define MIIADR_SWMPL        0x80
+
+/*
+ *	Bits in the CFGA register
+ */
+
+#define CFGA_PMHCTG         0x08
+#define CFGA_GPIO1PD        0x04
+#define CFGA_ABSHDN         0x02
+#define CFGA_PACPI          0x01
+
+/*
+ *	Bits in the CFGB register
+ */
+
+#define CFGB_GTCKOPT        0x80
+#define CFGB_MIIOPT         0x40
+#define CFGB_CRSEOPT        0x20
+#define CFGB_OFSET          0x10
+#define CFGB_CRANDOM        0x08
+#define CFGB_CAP            0x04
+#define CFGB_MBA            0x02
+#define CFGB_BAKOPT         0x01
+
+/*
+ *	Bits in the CFGC register
+ */
+
+#define CFGC_EELOAD         0x80
+#define CFGC_BROPT          0x40
+#define CFGC_DLYEN          0x20
+#define CFGC_DTSEL          0x10
+#define CFGC_BTSEL          0x08
+#define CFGC_BPS2           0x04	/* bootrom select[2] */
+#define CFGC_BPS1           0x02	/* bootrom select[1] */
+#define CFGC_BPS0           0x01	/* bootrom select[0] */
+
+/*
+ * Bits in the CFGD register
+ */
+
+#define CFGD_IODIS          0x80
+#define CFGD_MSLVDACEN      0x40
+#define CFGD_CFGDACEN       0x20
+#define CFGD_PCI64EN        0x10
+#define CFGD_HTMRL4         0x08
+
+/*
+ *	Bits in the DCFG1 register
+ */
+
+#define DCFG_XMWI           0x8000
+#define DCFG_XMRM           0x4000
+#define DCFG_XMRL           0x2000
+#define DCFG_PERDIS         0x1000
+#define DCFG_MRWAIT         0x0400
+#define DCFG_MWWAIT         0x0200
+#define DCFG_LATMEN         0x0100
+
+/*
+ *	Bits in the MCFG0 register
+ */
+
+#define MCFG_RXARB          0x0080
+#define MCFG_RFT1           0x0020
+#define MCFG_RFT0           0x0010
+#define MCFG_LOWTHOPT       0x0008
+#define MCFG_PQEN           0x0004
+#define MCFG_RTGOPT         0x0002
+#define MCFG_VIDFR          0x0001
+
+/*
+ *	Bits in the MCFG1 register
+ */
+
+#define MCFG_TXARB          0x8000
+#define MCFG_TXQBK1         0x0800
+#define MCFG_TXQBK0         0x0400
+#define MCFG_TXQNOBK        0x0200
+#define MCFG_SNAPOPT        0x0100
+
+/*
+ *	Bits in the PMCC  register
+ */
+
+#define PMCC_DSI            0x80
+#define PMCC_D2_DIS         0x40
+#define PMCC_D1_DIS         0x20
+#define PMCC_D3C_EN         0x10
+#define PMCC_D3H_EN         0x08
+#define PMCC_D2_EN          0x04
+#define PMCC_D1_EN          0x02
+#define PMCC_D0_EN          0x01
+
+/*
+ *	Bits in STICKHW
+ */
+
+#define STICKHW_SWPTAG      0x10
+#define STICKHW_WOLSR       0x08
+#define STICKHW_WOLEN       0x04
+#define STICKHW_DS1         0x02	/* R/W by software/cfg cycle */
+#define STICKHW_DS0         0x01	/* suspend well DS write port */
+
+/*
+ *	Bits in the MIBCR register
+ */
+
+#define MIBCR_MIBISTOK      0x80
+#define MIBCR_MIBISTGO      0x40
+#define MIBCR_MIBINC        0x20
+#define MIBCR_MIBHI         0x10
+#define MIBCR_MIBFRZ        0x08
+#define MIBCR_MIBFLSH       0x04
+#define MIBCR_MPTRINI       0x02
+#define MIBCR_MIBCLR        0x01
+
+/*
+ *	Bits in the EERSV register
+ */
+
+#define EERSV_BOOT_RPL      ((u8) 0x01)	 /* Boot method selection for VT6110 */
+
+#define EERSV_BOOT_MASK     ((u8) 0x06)
+#define EERSV_BOOT_INT19    ((u8) 0x00)
+#define EERSV_BOOT_INT18    ((u8) 0x02)
+#define EERSV_BOOT_LOCAL    ((u8) 0x04)
+#define EERSV_BOOT_BEV      ((u8) 0x06)
+
+
+/*
+ *	Bits in BPCMD
+ */
+
+#define BPCMD_BPDNE         0x80
+#define BPCMD_EBPWR         0x02
+#define BPCMD_EBPRD         0x01
+
+/*
+ *	Bits in the EECSR register
+ */
+
+#define EECSR_EMBP          0x40	/* eeprom embedded programming */
+#define EECSR_RELOAD        0x20	/* eeprom content reload */
+#define EECSR_DPM           0x10	/* eeprom direct programming */
+#define EECSR_ECS           0x08	/* eeprom CS pin */
+#define EECSR_ECK           0x04	/* eeprom CK pin */
+#define EECSR_EDI           0x02	/* eeprom DI pin */
+#define EECSR_EDO           0x01	/* eeprom DO pin */
+
+/*
+ *	Bits in the EMBCMD register
+ */
+
+#define EMBCMD_EDONE        0x80
+#define EMBCMD_EWDIS        0x08
+#define EMBCMD_EWEN         0x04
+#define EMBCMD_EWR          0x02
+#define EMBCMD_ERD          0x01
+
+/*
+ *	Bits in TESTCFG register
+ */
+
+#define TESTCFG_HBDIS       0x80
+
+/*
+ *	Bits in CHIPGCR register
+ */
+
+#define CHIPGCR_FCGMII      0x80	/* force GMII (else MII only) */
+#define CHIPGCR_FCFDX       0x40	/* force full duplex */
+#define CHIPGCR_FCRESV      0x20
+#define CHIPGCR_FCMODE      0x10	/* enable MAC forced mode */
+#define CHIPGCR_LPSOPT      0x08
+#define CHIPGCR_TM1US       0x04
+#define CHIPGCR_TM0US       0x02
+#define CHIPGCR_PHYINTEN    0x01
+
+/*
+ *	Bits in WOLCR0
+ */
+
+#define WOLCR_MSWOLEN7      0x0080	/* enable pattern match filtering */
+#define WOLCR_MSWOLEN6      0x0040
+#define WOLCR_MSWOLEN5      0x0020
+#define WOLCR_MSWOLEN4      0x0010
+#define WOLCR_MSWOLEN3      0x0008
+#define WOLCR_MSWOLEN2      0x0004
+#define WOLCR_MSWOLEN1      0x0002
+#define WOLCR_MSWOLEN0      0x0001
+#define WOLCR_ARP_EN        0x0001
+
+/*
+ *	Bits in WOLCR1
+ */
+
+#define WOLCR_LINKOFF_EN      0x0800	/* link off detected enable */
+#define WOLCR_LINKON_EN       0x0400	/* link on detected enable */
+#define WOLCR_MAGIC_EN        0x0200	/* magic packet filter enable */
+#define WOLCR_UNICAST_EN      0x0100	/* unicast filter enable */
+
+
+/*
+ *	Bits in PWCFG
+ */
+
+#define PWCFG_PHYPWOPT          0x80	/* internal MII I/F timing */
+#define PWCFG_PCISTICK          0x40	/* PCI sticky R/W enable */
+#define PWCFG_WOLTYPE           0x20	/* pulse(1) or button (0) */
+#define PWCFG_LEGCY_WOL         0x10
+#define PWCFG_PMCSR_PME_SR      0x08
+#define PWCFG_PMCSR_PME_EN      0x04	/* control by PCISTICK */
+#define PWCFG_LEGACY_WOLSR      0x02	/* Legacy WOL_SR shadow */
+#define PWCFG_LEGACY_WOLEN      0x01	/* Legacy WOL_EN shadow */
+
+/*
+ *	Bits in WOLCFG
+ */
+
+#define WOLCFG_PMEOVR           0x80	/* for legacy use, force PMEEN always */
+#define WOLCFG_SAM              0x20	/* accept multicast case reset, default=0 */
+#define WOLCFG_SAB              0x10	/* accept broadcast case reset, default=0 */
+#define WOLCFG_SMIIACC          0x08	/* ?? */
+#define WOLCFG_SGENWH           0x02
+#define WOLCFG_PHYINTEN         0x01	/* 0:PHYINT trigger enable, 1:use internal MII
+					  to report status change */
+/*
+ *	Bits in WOLSR1
+ */
+
+#define WOLSR_LINKOFF_INT      0x0800
+#define WOLSR_LINKON_INT       0x0400
+#define WOLSR_MAGIC_INT        0x0200
+#define WOLSR_UNICAST_INT      0x0100
+
+/*
+ *	Ethernet address filter type
+ */
+
+#define PKT_TYPE_NONE               0x0000	/* Turn off receiver */
+#define PKT_TYPE_DIRECTED           0x0001	/* obselete, directed address is always accepted */
+#define PKT_TYPE_MULTICAST          0x0002
+#define PKT_TYPE_ALL_MULTICAST      0x0004
+#define PKT_TYPE_BROADCAST          0x0008
+#define PKT_TYPE_PROMISCUOUS        0x0020
+#define PKT_TYPE_LONG               0x2000	/* NOTE.... the definition of LONG is >2048 bytes in our chip */
+#define PKT_TYPE_RUNT               0x4000
+#define PKT_TYPE_ERROR              0x8000	/* Accept error packets, e.g. CRC error */
+
+/*
+ *	Loopback mode
+ */
+
+#define MAC_LB_NONE         0x00
+#define MAC_LB_INTERNAL     0x01
+#define MAC_LB_EXTERNAL     0x02
+
+/*
+ *	Enabled mask value of irq
+ */
+
+#if defined(_SIM)
+#define IMR_MASK_VALUE      0x0033FF0FUL	/* initial value of IMR
+						   set IMR0 to 0x0F according to spec */
+
+#else
+#define IMR_MASK_VALUE      0x0013FB0FUL	/* initial value of IMR
+						   ignore MIBFI,RACEI to
+						   reduce intr. frequency
+						   NOTE.... do not enable NoBuf int mask at driver driver
+						      when (1) NoBuf -> RxThreshold = SF
+							   (2) OK    -> RxThreshold = original value
+						 */
+#endif
+
+/*
+ *	Revision id
+ */
+
+#define REV_ID_VT3119_A0	0x00
+#define REV_ID_VT3119_A1	0x01
+#define REV_ID_VT3216_A0	0x10
+
+/*
+ *	Max time out delay time
+ */
+
+#define W_MAX_TIMEOUT       0x0FFFU
+
+
+/*
+ *	MAC registers as a structure. Cannot be directly accessed this
+ *	way but generates offsets for readl/writel() calls
+ */
+
+struct mac_regs {
+	volatile u8 PAR[6];		/* 0x00 */
+	volatile u8 RCR;
+	volatile u8 TCR;
+
+	volatile __le32 CR0Set;		/* 0x08 */
+	volatile __le32 CR0Clr;		/* 0x0C */
+
+	volatile u8 MARCAM[8];		/* 0x10 */
+
+	volatile __le32 DecBaseHi;	/* 0x18 */
+	volatile __le16 DbfBaseHi;	/* 0x1C */
+	volatile __le16 reserved_1E;
+
+	volatile __le16 ISRCTL;		/* 0x20 */
+	volatile u8 TXESR;
+	volatile u8 RXESR;
+
+	volatile __le32 ISR;		/* 0x24 */
+	volatile __le32 IMR;
+
+	volatile __le32 TDStatusPort;	/* 0x2C */
+
+	volatile __le16 TDCSRSet;	/* 0x30 */
+	volatile u8 RDCSRSet;
+	volatile u8 reserved_33;
+	volatile __le16 TDCSRClr;
+	volatile u8 RDCSRClr;
+	volatile u8 reserved_37;
+
+	volatile __le32 RDBaseLo;	/* 0x38 */
+	volatile __le16 RDIdx;		/* 0x3C */
+	volatile u8 TQETMR;		/* 0x3E, VT3216 and above only */
+	volatile u8 RQETMR;		/* 0x3F, VT3216 and above only */
+
+	volatile __le32 TDBaseLo[4];	/* 0x40 */
+
+	volatile __le16 RDCSize;	/* 0x50 */
+	volatile __le16 TDCSize;	/* 0x52 */
+	volatile __le16 TDIdx[4];	/* 0x54 */
+	volatile __le16 tx_pause_timer;	/* 0x5C */
+	volatile __le16 RBRDU;		/* 0x5E */
+
+	volatile __le32 FIFOTest0;	/* 0x60 */
+	volatile __le32 FIFOTest1;	/* 0x64 */
+
+	volatile u8 CAMADDR;		/* 0x68 */
+	volatile u8 CAMCR;		/* 0x69 */
+	volatile u8 GFTEST;		/* 0x6A */
+	volatile u8 FTSTCMD;		/* 0x6B */
+
+	volatile u8 MIICFG;		/* 0x6C */
+	volatile u8 MIISR;
+	volatile u8 PHYSR0;
+	volatile u8 PHYSR1;
+	volatile u8 MIICR;
+	volatile u8 MIIADR;
+	volatile __le16 MIIDATA;
+
+	volatile __le16 SoftTimer0;	/* 0x74 */
+	volatile __le16 SoftTimer1;
+
+	volatile u8 CFGA;		/* 0x78 */
+	volatile u8 CFGB;
+	volatile u8 CFGC;
+	volatile u8 CFGD;
+
+	volatile __le16 DCFG;		/* 0x7C */
+	volatile __le16 MCFG;
+
+	volatile u8 TBIST;		/* 0x80 */
+	volatile u8 RBIST;
+	volatile u8 PMCPORT;
+	volatile u8 STICKHW;
+
+	volatile u8 MIBCR;		/* 0x84 */
+	volatile u8 reserved_85;
+	volatile u8 rev_id;
+	volatile u8 PORSTS;
+
+	volatile __le32 MIBData;	/* 0x88 */
+
+	volatile __le16 EEWrData;
+
+	volatile u8 reserved_8E;
+	volatile u8 BPMDWr;
+	volatile u8 BPCMD;
+	volatile u8 BPMDRd;
+
+	volatile u8 EECHKSUM;		/* 0x92 */
+	volatile u8 EECSR;
+
+	volatile __le16 EERdData;	/* 0x94 */
+	volatile u8 EADDR;
+	volatile u8 EMBCMD;
+
+
+	volatile u8 JMPSR0;		/* 0x98 */
+	volatile u8 JMPSR1;
+	volatile u8 JMPSR2;
+	volatile u8 JMPSR3;
+	volatile u8 CHIPGSR;		/* 0x9C */
+	volatile u8 TESTCFG;
+	volatile u8 DEBUG;
+	volatile u8 CHIPGCR;
+
+	volatile __le16 WOLCRSet;	/* 0xA0 */
+	volatile u8 PWCFGSet;
+	volatile u8 WOLCFGSet;
+
+	volatile __le16 WOLCRClr;	/* 0xA4 */
+	volatile u8 PWCFGCLR;
+	volatile u8 WOLCFGClr;
+
+	volatile __le16 WOLSRSet;	/* 0xA8 */
+	volatile __le16 reserved_AA;
+
+	volatile __le16 WOLSRClr;	/* 0xAC */
+	volatile __le16 reserved_AE;
+
+	volatile __le16 PatternCRC[8];	/* 0xB0 */
+	volatile __le32 ByteMask[4][4];	/* 0xC0 */
+};
+
+
+enum hw_mib {
+	HW_MIB_ifRxAllPkts = 0,
+	HW_MIB_ifRxOkPkts,
+	HW_MIB_ifTxOkPkts,
+	HW_MIB_ifRxErrorPkts,
+	HW_MIB_ifRxRuntOkPkt,
+	HW_MIB_ifRxRuntErrPkt,
+	HW_MIB_ifRx64Pkts,
+	HW_MIB_ifTx64Pkts,
+	HW_MIB_ifRx65To127Pkts,
+	HW_MIB_ifTx65To127Pkts,
+	HW_MIB_ifRx128To255Pkts,
+	HW_MIB_ifTx128To255Pkts,
+	HW_MIB_ifRx256To511Pkts,
+	HW_MIB_ifTx256To511Pkts,
+	HW_MIB_ifRx512To1023Pkts,
+	HW_MIB_ifTx512To1023Pkts,
+	HW_MIB_ifRx1024To1518Pkts,
+	HW_MIB_ifTx1024To1518Pkts,
+	HW_MIB_ifTxEtherCollisions,
+	HW_MIB_ifRxPktCRCE,
+	HW_MIB_ifRxJumboPkts,
+	HW_MIB_ifTxJumboPkts,
+	HW_MIB_ifRxMacControlFrames,
+	HW_MIB_ifTxMacControlFrames,
+	HW_MIB_ifRxPktFAE,
+	HW_MIB_ifRxLongOkPkt,
+	HW_MIB_ifRxLongPktErrPkt,
+	HW_MIB_ifTXSQEErrors,
+	HW_MIB_ifRxNobuf,
+	HW_MIB_ifRxSymbolErrors,
+	HW_MIB_ifInRangeLengthErrors,
+	HW_MIB_ifLateCollisions,
+	HW_MIB_SIZE
+};
+
+enum chip_type {
+	CHIP_TYPE_VT6110 = 1,
+};
+
+struct velocity_info_tbl {
+	enum chip_type chip_id;
+	const char *name;
+	int txqueue;
+	u32 flags;
+};
+
+#define mac_hw_mibs_init(regs) {\
+	BYTE_REG_BITS_ON(MIBCR_MIBFRZ,&((regs)->MIBCR));\
+	BYTE_REG_BITS_ON(MIBCR_MIBCLR,&((regs)->MIBCR));\
+	do {}\
+		while (BYTE_REG_BITS_IS_ON(MIBCR_MIBCLR,&((regs)->MIBCR)));\
+	BYTE_REG_BITS_OFF(MIBCR_MIBFRZ,&((regs)->MIBCR));\
+}
+
+#define mac_read_isr(regs)  		readl(&((regs)->ISR))
+#define mac_write_isr(regs, x)  	writel((x),&((regs)->ISR))
+#define mac_clear_isr(regs) 		writel(0xffffffffL,&((regs)->ISR))
+
+#define mac_write_int_mask(mask, regs) 	writel((mask),&((regs)->IMR));
+#define mac_disable_int(regs)       	writel(CR0_GINTMSK1,&((regs)->CR0Clr))
+#define mac_enable_int(regs)    	writel(CR0_GINTMSK1,&((regs)->CR0Set))
+
+#define mac_set_dma_length(regs, n) {\
+	BYTE_REG_BITS_SET((n),0x07,&((regs)->DCFG));\
+}
+
+#define mac_set_rx_thresh(regs, n) {\
+	BYTE_REG_BITS_SET((n),(MCFG_RFT0|MCFG_RFT1),&((regs)->MCFG));\
+}
+
+#define mac_rx_queue_run(regs) {\
+	writeb(TRDCSR_RUN, &((regs)->RDCSRSet));\
+}
+
+#define mac_rx_queue_wake(regs) {\
+	writeb(TRDCSR_WAK, &((regs)->RDCSRSet));\
+}
+
+#define mac_tx_queue_run(regs, n) {\
+	writew(TRDCSR_RUN<<((n)*4),&((regs)->TDCSRSet));\
+}
+
+#define mac_tx_queue_wake(regs, n) {\
+	writew(TRDCSR_WAK<<(n*4),&((regs)->TDCSRSet));\
+}
+
+static inline void mac_eeprom_reload(struct mac_regs __iomem * regs) {
+	int i=0;
+
+	BYTE_REG_BITS_ON(EECSR_RELOAD,&(regs->EECSR));
+	do {
+		udelay(10);
+		if (i++>0x1000)
+			break;
+	} while (BYTE_REG_BITS_IS_ON(EECSR_RELOAD,&(regs->EECSR)));
+}
+
+/*
+ * Header for WOL definitions. Used to compute hashes
+ */
+
+typedef u8 MCAM_ADDR[ETH_ALEN];
+
+struct arp_packet {
+	u8 dest_mac[ETH_ALEN];
+	u8 src_mac[ETH_ALEN];
+	__be16 type;
+	__be16 ar_hrd;
+	__be16 ar_pro;
+	u8 ar_hln;
+	u8 ar_pln;
+	__be16 ar_op;
+	u8 ar_sha[ETH_ALEN];
+	u8 ar_sip[4];
+	u8 ar_tha[ETH_ALEN];
+	u8 ar_tip[4];
+} __packed;
+
+struct _magic_packet {
+	u8 dest_mac[6];
+	u8 src_mac[6];
+	__be16 type;
+	u8 MAC[16][6];
+	u8 password[6];
+} __packed;
+
+/*
+ *	Store for chip context when saving and restoring status. Not
+ *	all fields are saved/restored currently.
+ */
+
+struct velocity_context {
+	u8 mac_reg[256];
+	MCAM_ADDR cam_addr[MCAM_SIZE];
+	u16 vcam[VCAM_SIZE];
+	u32 cammask[2];
+	u32 patcrc[2];
+	u32 pattern[8];
+};
+
+/*
+ *	Registers in the MII (offset unit is WORD)
+ */
+
+// Marvell 88E1000/88E1000S
+#define MII_REG_PSCR        0x10	// PHY specific control register
+
+//
+// Bits in the Silicon revision register
+//
+
+#define TCSR_ECHODIS        0x2000	//
+#define AUXCR_MDPPS         0x0004	//
+
+// Bits in the PLED register
+#define PLED_LALBE			0x0004	//
+
+// Marvell 88E1000/88E1000S Bits in the PHY specific control register (10h)
+#define PSCR_ACRSTX         0x0800	// Assert CRS on Transmit
+
+#define PHYID_CICADA_CS8201 0x000FC410UL
+#define PHYID_VT3216_32BIT  0x000FC610UL
+#define PHYID_VT3216_64BIT  0x000FC600UL
+#define PHYID_MARVELL_1000  0x01410C50UL
+#define PHYID_MARVELL_1000S 0x01410C40UL
+#define PHYID_ICPLUS_IP101A 0x02430C54UL
+#define PHYID_REV_ID_MASK   0x0000000FUL
+
+#define PHYID_GET_PHY_ID(i)         ((i) & ~PHYID_REV_ID_MASK)
+
+#define MII_REG_BITS_ON(x,i,p) do {\
+    u16 w;\
+    velocity_mii_read((p),(i),&(w));\
+    (w)|=(x);\
+    velocity_mii_write((p),(i),(w));\
+} while (0)
+
+#define MII_REG_BITS_OFF(x,i,p) do {\
+    u16 w;\
+    velocity_mii_read((p),(i),&(w));\
+    (w)&=(~(x));\
+    velocity_mii_write((p),(i),(w));\
+} while (0)
+
+#define MII_REG_BITS_IS_ON(x,i,p) ({\
+    u16 w;\
+    velocity_mii_read((p),(i),&(w));\
+    ((int) ((w) & (x)));})
+
+#define MII_GET_PHY_ID(p) ({\
+    u32 id;\
+    velocity_mii_read((p),MII_PHYSID2,(u16 *) &id);\
+    velocity_mii_read((p),MII_PHYSID1,((u16 *) &id)+1);\
+    (id);})
+
+/*
+ * Inline debug routine
+ */
+
+
+enum velocity_msg_level {
+	MSG_LEVEL_ERR = 0,	//Errors that will cause abnormal operation.
+	MSG_LEVEL_NOTICE = 1,	//Some errors need users to be notified.
+	MSG_LEVEL_INFO = 2,	//Normal message.
+	MSG_LEVEL_VERBOSE = 3,	//Will report all trival errors.
+	MSG_LEVEL_DEBUG = 4	//Only for debug purpose.
+};
+
+#ifdef VELOCITY_DEBUG
+#define ASSERT(x) { \
+	if (!(x)) { \
+		printk(KERN_ERR "assertion %s failed: file %s line %d\n", #x,\
+			__func__, __LINE__);\
+		BUG(); \
+	}\
+}
+#define VELOCITY_DBG(p,args...) printk(p, ##args)
+#else
+#define ASSERT(x)
+#define VELOCITY_DBG(x)
+#endif
+
+#define VELOCITY_PRT(l, p, args...) do {if (l<=msglevel) printk( p ,##args);} while (0)
+
+#define VELOCITY_PRT_CAMMASK(p,t) {\
+	int i;\
+	if ((t)==VELOCITY_MULTICAST_CAM) {\
+        	for (i=0;i<(MCAM_SIZE/8);i++)\
+			printk("%02X",(p)->mCAMmask[i]);\
+	}\
+	else {\
+		for (i=0;i<(VCAM_SIZE/8);i++)\
+			printk("%02X",(p)->vCAMmask[i]);\
+	}\
+	printk("\n");\
+}
+
+
+
+#define     VELOCITY_WOL_MAGIC             0x00000000UL
+#define     VELOCITY_WOL_PHY               0x00000001UL
+#define     VELOCITY_WOL_ARP               0x00000002UL
+#define     VELOCITY_WOL_UCAST             0x00000004UL
+#define     VELOCITY_WOL_BCAST             0x00000010UL
+#define     VELOCITY_WOL_MCAST             0x00000020UL
+#define     VELOCITY_WOL_MAGIC_SEC         0x00000040UL
+
+/*
+ *	Flags for options
+ */
+
+#define     VELOCITY_FLAGS_TAGGING         0x00000001UL
+#define     VELOCITY_FLAGS_RX_CSUM         0x00000004UL
+#define     VELOCITY_FLAGS_IP_ALIGN        0x00000008UL
+#define     VELOCITY_FLAGS_VAL_PKT_LEN     0x00000010UL
+
+#define     VELOCITY_FLAGS_FLOW_CTRL       0x01000000UL
+
+/*
+ *	Flags for driver status
+ */
+
+#define     VELOCITY_FLAGS_OPENED          0x00010000UL
+#define     VELOCITY_FLAGS_VMNS_CONNECTED  0x00020000UL
+#define     VELOCITY_FLAGS_VMNS_COMMITTED  0x00040000UL
+#define     VELOCITY_FLAGS_WOL_ENABLED     0x00080000UL
+
+/*
+ *	Flags for MII status
+ */
+
+#define     VELOCITY_LINK_FAIL             0x00000001UL
+#define     VELOCITY_SPEED_10              0x00000002UL
+#define     VELOCITY_SPEED_100             0x00000004UL
+#define     VELOCITY_SPEED_1000            0x00000008UL
+#define     VELOCITY_DUPLEX_FULL           0x00000010UL
+#define     VELOCITY_AUTONEG_ENABLE        0x00000020UL
+#define     VELOCITY_FORCED_BY_EEPROM      0x00000040UL
+
+/*
+ *	For velocity_set_media_duplex
+ */
+
+#define     VELOCITY_LINK_CHANGE           0x00000001UL
+
+enum speed_opt {
+	SPD_DPX_AUTO = 0,
+	SPD_DPX_100_HALF = 1,
+	SPD_DPX_100_FULL = 2,
+	SPD_DPX_10_HALF = 3,
+	SPD_DPX_10_FULL = 4,
+	SPD_DPX_1000_FULL = 5
+};
+
+enum velocity_init_type {
+	VELOCITY_INIT_COLD = 0,
+	VELOCITY_INIT_RESET,
+	VELOCITY_INIT_WOL
+};
+
+enum velocity_flow_cntl_type {
+	FLOW_CNTL_DEFAULT = 1,
+	FLOW_CNTL_TX,
+	FLOW_CNTL_RX,
+	FLOW_CNTL_TX_RX,
+	FLOW_CNTL_DISABLE,
+};
+
+struct velocity_opt {
+	int numrx;			/* Number of RX descriptors */
+	int numtx;			/* Number of TX descriptors */
+	enum speed_opt spd_dpx;		/* Media link mode */
+
+	int DMA_length;			/* DMA length */
+	int rx_thresh;			/* RX_THRESH */
+	int flow_cntl;
+	int wol_opts;			/* Wake on lan options */
+	int td_int_count;
+	int int_works;
+	int rx_bandwidth_hi;
+	int rx_bandwidth_lo;
+	int rx_bandwidth_en;
+	int rxqueue_timer;
+	int txqueue_timer;
+	int tx_intsup;
+	int rx_intsup;
+	u32 flags;
+};
+
+#define AVAIL_TD(p,q)   ((p)->options.numtx-((p)->tx.used[(q)]))
+
+#define GET_RD_BY_IDX(vptr, idx)   (vptr->rd_ring[idx])
+
+struct velocity_info {
+	struct device *dev;
+	struct pci_dev *pdev;
+	struct net_device *netdev;
+	int no_eeprom;
+
+	unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
+	u8 ip_addr[4];
+	enum chip_type chip_id;
+
+	struct mac_regs __iomem * mac_regs;
+	unsigned long memaddr;
+	unsigned long ioaddr;
+
+	struct tx_info {
+		int numq;
+
+		/* FIXME: the locality of the data seems rather poor. */
+		int used[TX_QUEUE_NO];
+		int curr[TX_QUEUE_NO];
+		int tail[TX_QUEUE_NO];
+		struct tx_desc *rings[TX_QUEUE_NO];
+		struct velocity_td_info *infos[TX_QUEUE_NO];
+		dma_addr_t pool_dma[TX_QUEUE_NO];
+	} tx;
+
+	struct rx_info {
+		int buf_sz;
+
+		int dirty;
+		int curr;
+		u32 filled;
+		struct rx_desc *ring;
+		struct velocity_rd_info *info;	/* It's an array */
+		dma_addr_t pool_dma;
+	} rx;
+
+	u32 mib_counter[MAX_HW_MIB_COUNTER];
+	struct velocity_opt options;
+
+	u32 int_mask;
+
+	u32 flags;
+
+	u32 mii_status;
+	u32 phy_id;
+	int multicast_limit;
+
+	u8 vCAMmask[(VCAM_SIZE / 8)];
+	u8 mCAMmask[(MCAM_SIZE / 8)];
+
+	spinlock_t lock;
+
+	int wol_opts;
+	u8 wol_passwd[6];
+
+	struct velocity_context context;
+
+	u32 ticks;
+
+	u8 rev_id;
+
+	struct napi_struct napi;
+};
+
+/**
+ *	velocity_get_ip		-	find an IP address for the device
+ *	@vptr: Velocity to query
+ *
+ *	Dig out an IP address for this interface so that we can
+ *	configure wakeup with WOL for ARP. If there are multiple IP
+ *	addresses on this chain then we use the first - multi-IP WOL is not
+ *	supported.
+ *
+ */
+
+static inline int velocity_get_ip(struct velocity_info *vptr)
+{
+	struct in_device *in_dev;
+	struct in_ifaddr *ifa;
+	int res = -ENOENT;
+
+	rcu_read_lock();
+	in_dev = __in_dev_get_rcu(vptr->netdev);
+	if (in_dev != NULL) {
+		ifa = (struct in_ifaddr *) in_dev->ifa_list;
+		if (ifa != NULL) {
+			memcpy(vptr->ip_addr, &ifa->ifa_address, 4);
+			res = 0;
+		}
+	}
+	rcu_read_unlock();
+	return res;
+}
+
+/**
+ *	velocity_update_hw_mibs	-	fetch MIB counters from chip
+ *	@vptr: velocity to update
+ *
+ *	The velocity hardware keeps certain counters in the hardware
+ * 	side. We need to read these when the user asks for statistics
+ *	or when they overflow (causing an interrupt). The read of the
+ *	statistic clears it, so we keep running master counters in user
+ *	space.
+ */
+
+static inline void velocity_update_hw_mibs(struct velocity_info *vptr)
+{
+	u32 tmp;
+	int i;
+	BYTE_REG_BITS_ON(MIBCR_MIBFLSH, &(vptr->mac_regs->MIBCR));
+
+	while (BYTE_REG_BITS_IS_ON(MIBCR_MIBFLSH, &(vptr->mac_regs->MIBCR)));
+
+	BYTE_REG_BITS_ON(MIBCR_MPTRINI, &(vptr->mac_regs->MIBCR));
+	for (i = 0; i < HW_MIB_SIZE; i++) {
+		tmp = readl(&(vptr->mac_regs->MIBData)) & 0x00FFFFFFUL;
+		vptr->mib_counter[i] += tmp;
+	}
+}
+
+/**
+ *	init_flow_control_register 	-	set up flow control
+ *	@vptr: velocity to configure
+ *
+ *	Configure the flow control registers for this velocity device.
+ */
+
+static inline void init_flow_control_register(struct velocity_info *vptr)
+{
+	struct mac_regs __iomem * regs = vptr->mac_regs;
+
+	/* Set {XHITH1, XHITH0, XLTH1, XLTH0} in FlowCR1 to {1, 0, 1, 1}
+	   depend on RD=64, and Turn on XNOEN in FlowCR1 */
+	writel((CR0_XONEN | CR0_XHITH1 | CR0_XLTH1 | CR0_XLTH0), &regs->CR0Set);
+	writel((CR0_FDXTFCEN | CR0_FDXRFCEN | CR0_HDXFCEN | CR0_XHITH0), &regs->CR0Clr);
+
+	/* Set TxPauseTimer to 0xFFFF */
+	writew(0xFFFF, &regs->tx_pause_timer);
+
+	/* Initialize RBRDU to Rx buffer count. */
+	writew(vptr->options.numrx, &regs->RBRDU);
+}
+
+
+#endif