Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

1 files changed, 133 insertions, 0 deletions

diff --git a/kernel/drivers/net/ethernet/ti/Kconfig b/kernel/drivers/net/ethernet/ti/Kconfig
new file mode 100644
index 000000000..631e0afd0
--- /dev/null
+++ b/kernel/drivers/net/ethernet/ti/Kconfig
@@ -0,0 +1,133 @@
+#
+# TI device configuration
+#
+
+config NET_VENDOR_TI
+	bool "Texas Instruments (TI) devices"
+	default y
+	depends on PCI || EISA || AR7 || ARCH_DAVINCI || ARCH_OMAP2PLUS || ARCH_KEYSTONE
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about TI devices. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_TI
+
+config TI_DAVINCI_EMAC
+	tristate "TI DaVinci EMAC Support"
+	depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 )
+	select TI_DAVINCI_MDIO
+	select TI_DAVINCI_CPDMA
+	select PHYLIB
+	---help---
+	  This driver supports TI's DaVinci Ethernet .
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called davinci_emac_driver.  This is recommended.
+
+config TI_DAVINCI_MDIO
+	tristate "TI DaVinci MDIO Support"
+	depends on ARCH_DAVINCI || ARCH_OMAP2PLUS || ARCH_KEYSTONE
+	select PHYLIB
+	---help---
+	  This driver supports TI's DaVinci MDIO module.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called davinci_mdio.  This is recommended.
+
+config TI_DAVINCI_CPDMA
+	tristate "TI DaVinci CPDMA Support"
+	depends on ARCH_DAVINCI || ARCH_OMAP2PLUS
+	---help---
+	  This driver supports TI's DaVinci CPDMA dma engine.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called davinci_cpdma.  This is recommended.
+
+config TI_CPSW_PHY_SEL
+	bool "TI CPSW Switch Phy sel Support"
+	depends on TI_CPSW
+	---help---
+	  This driver supports configuring of the phy mode connected to
+	  the CPSW.
+
+config TI_CPSW_ALE
+	tristate "TI CPSW ALE Support"
+	---help---
+	  This driver supports TI's CPSW ALE module.
+
+config TI_CPSW
+	tristate "TI CPSW Switch Support"
+	depends on ARCH_DAVINCI || ARCH_OMAP2PLUS
+	select TI_DAVINCI_CPDMA
+	select TI_DAVINCI_MDIO
+	select TI_CPSW_PHY_SEL
+	select TI_CPSW_ALE
+	select MFD_SYSCON
+	select REGMAP
+	---help---
+	  This driver supports TI's CPSW Ethernet Switch.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called cpsw.
+
+config TI_CPTS
+	bool "TI Common Platform Time Sync (CPTS) Support"
+	depends on TI_CPSW
+	select PTP_1588_CLOCK
+	---help---
+	  This driver supports the Common Platform Time Sync unit of
+	  the CPSW Ethernet Switch. The unit can time stamp PTP UDP/IPv4
+	  and Layer 2 packets, and the driver offers a PTP Hardware Clock.
+
+config TI_KEYSTONE_NETCP
+	tristate "TI Keystone NETCP Core Support"
+	select TI_CPSW_ALE
+	select TI_DAVINCI_MDIO
+	depends on OF
+	depends on KEYSTONE_NAVIGATOR_DMA && KEYSTONE_NAVIGATOR_QMSS
+	---help---
+	  This driver supports TI's Keystone NETCP Core.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called keystone_netcp.
+
+config TI_KEYSTONE_NETCP_ETHSS
+	depends on TI_KEYSTONE_NETCP
+	tristate "TI Keystone NETCP Ethernet subsystem Support"
+	---help---
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called keystone_netcp_ethss.
+
+config TLAN
+	tristate "TI ThunderLAN support"
+	depends on (PCI || EISA)
+	---help---
+	  If you have a PCI Ethernet network card based on the ThunderLAN chip
+	  which is supported by this driver, say Y and read the
+	  Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Devices currently supported by this driver are Compaq Netelligent,
+	  Compaq NetFlex and Olicom cards.  Please read the file
+	  <file:Documentation/networking/tlan.txt> for more details.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called tlan.
+
+	  Please email feedback to <torben.mathiasen@compaq.com>.
+
+config CPMAC
+	tristate "TI AR7 CPMAC Ethernet support"
+	depends on AR7
+	select PHYLIB
+	---help---
+	  TI AR7 CPMAC Ethernet support
+
+endif # NET_VENDOR_TI