Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

1 files changed, 265 insertions, 0 deletions

diff --git a/kernel/drivers/net/ethernet/realtek/atp.h b/kernel/drivers/net/ethernet/realtek/atp.h
new file mode 100644
index 000000000..32497f0e5
--- /dev/null
+++ b/kernel/drivers/net/ethernet/realtek/atp.h
@@ -0,0 +1,265 @@
+/* Linux header file for the ATP pocket ethernet adapter. */
+/* v1.09 8/9/2000 becker@scyld.com. */
+
+#include <linux/if_ether.h>
+#include <linux/types.h>
+
+/* The header prepended to received packets. */
+struct rx_header {
+	ushort pad;		/* Pad. */
+	ushort rx_count;
+	ushort rx_status;	/* Unknown bit assignments :-<.  */
+	ushort cur_addr;	/* Apparently the current buffer address(?) */
+};
+
+#define PAR_DATA	0
+#define PAR_STATUS	1
+#define PAR_CONTROL 2
+
+#define Ctrl_LNibRead	0x08	/* LP_PSELECP */
+#define Ctrl_HNibRead	0
+#define Ctrl_LNibWrite	0x08	/* LP_PSELECP */
+#define Ctrl_HNibWrite	0
+#define Ctrl_SelData	0x04	/* LP_PINITP */
+#define Ctrl_IRQEN	0x10	/* LP_PINTEN */
+
+#define EOW	0xE0
+#define EOC	0xE0
+#define WrAddr	0x40	/* Set address of EPLC read, write register. */
+#define RdAddr	0xC0
+#define HNib	0x10
+
+enum page0_regs {
+	/* The first six registers hold
+	 * the ethernet physical station address.
+	 */
+	PAR0 = 0, PAR1 = 1, PAR2 = 2, PAR3 = 3, PAR4 = 4, PAR5 = 5,
+	TxCNT0 = 6, TxCNT1 = 7,		/* The transmit byte count. */
+	TxSTAT = 8, RxSTAT = 9,		/* Tx and Rx status. */
+	ISR = 10, IMR = 11,		/* Interrupt status and mask. */
+	CMR1 = 12,			/* Command register 1. */
+	CMR2 = 13,			/* Command register 2. */
+	MODSEL = 14,		/* Mode select register. */
+	MAR = 14,			/* Memory address register (?). */
+	CMR2_h = 0x1d,
+};
+
+enum eepage_regs {
+	PROM_CMD = 6,
+	PROM_DATA = 7	/* Note that PROM_CMD is in the "high" bits. */
+};
+
+#define ISR_TxOK	0x01
+#define ISR_RxOK	0x04
+#define ISR_TxErr	0x02
+#define ISRh_RxErr	0x11	/* ISR, high nibble */
+
+#define CMR1h_MUX	0x08	/* Select printer multiplexor on 8012. */
+#define CMR1h_RESET	0x04	/* Reset. */
+#define CMR1h_RxENABLE	0x02	/* Rx unit enable.  */
+#define CMR1h_TxENABLE	0x01	/* Tx unit enable.  */
+#define CMR1h_TxRxOFF	0x00
+#define CMR1_ReXmit	0x08	/* Trigger a retransmit. */
+#define CMR1_Xmit	0x04	/* Trigger a transmit. */
+#define	CMR1_IRQ	0x02	/* Interrupt active. */
+#define	CMR1_BufEnb	0x01	/* Enable the buffer(?). */
+#define	CMR1_NextPkt	0x01	/* Enable the buffer(?). */
+
+#define CMR2_NULL	8
+#define CMR2_IRQOUT	9
+#define CMR2_RAMTEST	10
+#define CMR2_EEPROM	12	/* Set to page 1, for reading the EEPROM. */
+
+#define CMR2h_OFF	0	/* No accept mode. */
+#define CMR2h_Physical	1	/* Accept a physical address match only. */
+#define CMR2h_Normal	2	/* Accept physical and broadcast address. */
+#define CMR2h_PROMISC	3	/* Promiscuous mode. */
+
+/* An inline function used below: it differs from inb() by explicitly
+ * return an unsigned char, saving a truncation.
+ */
+static inline unsigned char inbyte(unsigned short port)
+{
+	unsigned char _v;
+
+	__asm__ __volatile__ ("inb %w1,%b0" : "=a" (_v) : "d" (port));
+	return _v;
+}
+
+/* Read register OFFSET.
+ * This command should always be terminated with read_end().
+ */
+static inline unsigned char read_nibble(short port, unsigned char offset)
+{
+	unsigned char retval;
+
+	outb(EOC+offset, port + PAR_DATA);
+	outb(RdAddr+offset, port + PAR_DATA);
+	inbyte(port + PAR_STATUS);	/* Settling time delay */
+	retval = inbyte(port + PAR_STATUS);
+	outb(EOC+offset, port + PAR_DATA);
+
+	return retval;
+}
+
+/* Functions for bulk data read.  The interrupt line is always disabled. */
+/* Get a byte using read mode 0, reading data from the control lines. */
+static inline unsigned char read_byte_mode0(short ioaddr)
+{
+	unsigned char low_nib;
+
+	outb(Ctrl_LNibRead, ioaddr + PAR_CONTROL);
+	inbyte(ioaddr + PAR_STATUS);
+	low_nib = (inbyte(ioaddr + PAR_STATUS) >> 3) & 0x0f;
+	outb(Ctrl_HNibRead, ioaddr + PAR_CONTROL);
+	inbyte(ioaddr + PAR_STATUS);	/* Settling time delay -- needed!  */
+	inbyte(ioaddr + PAR_STATUS);	/* Settling time delay -- needed!  */
+	return low_nib | ((inbyte(ioaddr + PAR_STATUS) << 1) & 0xf0);
+}
+
+/* The same as read_byte_mode0(), but does multiple inb()s for stability. */
+static inline unsigned char read_byte_mode2(short ioaddr)
+{
+	unsigned char low_nib;
+
+	outb(Ctrl_LNibRead, ioaddr + PAR_CONTROL);
+	inbyte(ioaddr + PAR_STATUS);
+	low_nib = (inbyte(ioaddr + PAR_STATUS) >> 3) & 0x0f;
+	outb(Ctrl_HNibRead, ioaddr + PAR_CONTROL);
+	inbyte(ioaddr + PAR_STATUS);	/* Settling time delay -- needed!  */
+	return low_nib | ((inbyte(ioaddr + PAR_STATUS) << 1) & 0xf0);
+}
+
+/* Read a byte through the data register. */
+static inline unsigned char read_byte_mode4(short ioaddr)
+{
+	unsigned char low_nib;
+
+	outb(RdAddr | MAR, ioaddr + PAR_DATA);
+	low_nib = (inbyte(ioaddr + PAR_STATUS) >> 3) & 0x0f;
+	outb(RdAddr | HNib | MAR, ioaddr + PAR_DATA);
+	return low_nib | ((inbyte(ioaddr + PAR_STATUS) << 1) & 0xf0);
+}
+
+/* Read a byte through the data register, double reading to allow settling. */
+static inline unsigned char read_byte_mode6(short ioaddr)
+{
+	unsigned char low_nib;
+
+	outb(RdAddr | MAR, ioaddr + PAR_DATA);
+	inbyte(ioaddr + PAR_STATUS);
+	low_nib = (inbyte(ioaddr + PAR_STATUS) >> 3) & 0x0f;
+	outb(RdAddr | HNib | MAR, ioaddr + PAR_DATA);
+	inbyte(ioaddr + PAR_STATUS);
+	return low_nib | ((inbyte(ioaddr + PAR_STATUS) << 1) & 0xf0);
+}
+
+static inline void
+write_reg(short port, unsigned char reg, unsigned char value)
+{
+	unsigned char outval;
+
+	outb(EOC | reg, port + PAR_DATA);
+	outval = WrAddr | reg;
+	outb(outval, port + PAR_DATA);
+	outb(outval, port + PAR_DATA);	/* Double write for PS/2. */
+
+	outval &= 0xf0;
+	outval |= value;
+	outb(outval, port + PAR_DATA);
+	outval &= 0x1f;
+	outb(outval, port + PAR_DATA);
+	outb(outval, port + PAR_DATA);
+
+	outb(EOC | outval, port + PAR_DATA);
+}
+
+static inline void
+write_reg_high(short port, unsigned char reg, unsigned char value)
+{
+	unsigned char outval = EOC | HNib | reg;
+
+	outb(outval, port + PAR_DATA);
+	outval &= WrAddr | HNib | 0x0f;
+	outb(outval, port + PAR_DATA);
+	outb(outval, port + PAR_DATA);	/* Double write for PS/2. */
+
+	outval = WrAddr | HNib | value;
+	outb(outval, port + PAR_DATA);
+	outval &= HNib | 0x0f;		/* HNib | value */
+	outb(outval, port + PAR_DATA);
+	outb(outval, port + PAR_DATA);
+
+	outb(EOC | HNib | outval, port + PAR_DATA);
+}
+
+/* Write a byte out using nibble mode.  The low nibble is written first. */
+static inline void
+write_reg_byte(short port, unsigned char reg, unsigned char value)
+{
+	unsigned char outval;
+
+	outb(EOC | reg, port + PAR_DATA); /* Reset the address register. */
+	outval = WrAddr | reg;
+	outb(outval, port + PAR_DATA);
+	outb(outval, port + PAR_DATA);	/* Double write for PS/2. */
+
+	outb((outval & 0xf0) | (value & 0x0f), port + PAR_DATA);
+	outb(value & 0x0f, port + PAR_DATA);
+	value >>= 4;
+	outb(value, port + PAR_DATA);
+	outb(0x10 | value, port + PAR_DATA);
+	outb(0x10 | value, port + PAR_DATA);
+
+	outb(EOC  | value, port + PAR_DATA); /* Reset the address register. */
+}
+
+/* Bulk data writes to the packet buffer.  The interrupt line remains enabled.
+ * The first, faster method uses only the dataport (data modes 0, 2 & 4).
+ * The second (backup) method uses data and control regs (modes 1, 3 & 5).
+ * It should only be needed when there is skew between the individual data
+ * lines.
+ */
+static inline void write_byte_mode0(short ioaddr, unsigned char value)
+{
+	outb(value & 0x0f, ioaddr + PAR_DATA);
+	outb((value>>4) | 0x10, ioaddr + PAR_DATA);
+}
+
+static inline void write_byte_mode1(short ioaddr, unsigned char value)
+{
+	outb(value & 0x0f, ioaddr + PAR_DATA);
+	outb(Ctrl_IRQEN | Ctrl_LNibWrite, ioaddr + PAR_CONTROL);
+	outb((value>>4) | 0x10, ioaddr + PAR_DATA);
+	outb(Ctrl_IRQEN | Ctrl_HNibWrite, ioaddr + PAR_CONTROL);
+}
+
+/* Write 16bit VALUE to the packet buffer: the same as above just doubled. */
+static inline void write_word_mode0(short ioaddr, unsigned short value)
+{
+	outb(value & 0x0f, ioaddr + PAR_DATA);
+	value >>= 4;
+	outb((value & 0x0f) | 0x10, ioaddr + PAR_DATA);
+	value >>= 4;
+	outb(value & 0x0f, ioaddr + PAR_DATA);
+	value >>= 4;
+	outb((value & 0x0f) | 0x10, ioaddr + PAR_DATA);
+}
+
+/*  EEPROM_Ctrl bits. */
+#define EE_SHIFT_CLK	0x04	/* EEPROM shift clock. */
+#define EE_CS		0x02	/* EEPROM chip select. */
+#define EE_CLK_HIGH	0x12
+#define EE_CLK_LOW	0x16
+#define EE_DATA_WRITE	0x01	/* EEPROM chip data in. */
+#define EE_DATA_READ	0x08	/* EEPROM chip data out. */
+
+/* Delay between EEPROM clock transitions. */
+#define eeprom_delay(ticks) \
+do { int _i = 40; while (--_i > 0) { __SLOW_DOWN_IO; } } while (0)
+
+/* The EEPROM commands include the alway-set leading bit. */
+#define EE_WRITE_CMD(offset)	(((5 << 6) + (offset)) << 17)
+#define EE_READ(offset)		(((6 << 6) + (offset)) << 17)
+#define EE_ERASE(offset)	(((7 << 6) + (offset)) << 17)
+#define EE_CMD_SIZE	27	/* The command+address+data size. */