Upgrade to 4.4.50-rt62

The current kernel is based on rt kernel v4.4.6-rt14. We will upgrade it
to 4.4.50-rt62.
The command to achieve it is:
a) Clone a git repo from
git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-stable-rt.git

b) Get the diff between this two changesets:
git diff 640eca2901f3435e616157b11379d3223a44b391
705619beeea1b0b48219a683fd1a901a86fdaf5e

where the two commits are:
[yjiang5@jnakajim-build linux-stable-rt]$ git show --oneline --name-only
640eca2901f3435e616157b11379d3223a44b391
640eca2901f3 v4.4.6-rt14
localversion-rt
[yjiang5@jnakajim-build linux-stable-rt]$ git show --oneline --name-only
705619beeea1b0b48219a683fd1a901a86fdaf5e
705619beeea1 Linux 4.4.50-rt62
localversion-rt

c) One patch has been backported thus revert the patch before applying.

 filterdiff -p1 -x scripts/package/Makefile
~/tmp/v4.4.6-rt14-4.4.50-rt62.diff  |patch -p1 --dry-run

Upstream status: backport

Change-Id: I244d57a32f6066e5a5b9915f9fbf99e7bbca6e01
Signed-off-by: Yunhong Jiang <yunhong.jiang@linux.intel.com>

6 files changed, 45 insertions, 4 deletions

diff --git a/kernel/drivers/net/ethernet/intel/igb/e1000_82575.c b/kernel/drivers/net/ethernet/intel/igb/e1000_82575.c
index 7a73510e5..97bf0c3d5 100644
--- a/kernel/drivers/net/ethernet/intel/igb/e1000_82575.c
+++ b/kernel/drivers/net/ethernet/intel/igb/e1000_82575.c
@@ -294,6 +294,7 @@ static s32 igb_init_phy_params_82575(struct e1000_hw *hw)
 	case I210_I_PHY_ID:
 		phy->type		= e1000_phy_i210;
 		phy->ops.check_polarity	= igb_check_polarity_m88;
+		phy->ops.get_cfg_done	= igb_get_cfg_done_i210;
 		phy->ops.get_phy_info	= igb_get_phy_info_m88;
 		phy->ops.get_cable_length = igb_get_cable_length_m88_gen2;
 		phy->ops.set_d0_lplu_state = igb_set_d0_lplu_state_82580;
diff --git a/kernel/drivers/net/ethernet/intel/igb/e1000_i210.c b/kernel/drivers/net/ethernet/intel/igb/e1000_i210.c
index 65d931669..29f59c768 100644
--- a/kernel/drivers/net/ethernet/intel/igb/e1000_i210.c
+++ b/kernel/drivers/net/ethernet/intel/igb/e1000_i210.c
@@ -900,3 +900,30 @@ s32 igb_pll_workaround_i210(struct e1000_hw *hw)
 	wr32(E1000_MDICNFG, mdicnfg);
 	return ret_val;
 }
+
+/**
+ *  igb_get_cfg_done_i210 - Read config done bit
+ *  @hw: pointer to the HW structure
+ *
+ *  Read the management control register for the config done bit for
+ *  completion status.  NOTE: silicon which is EEPROM-less will fail trying
+ *  to read the config done bit, so an error is *ONLY* logged and returns
+ *  0.  If we were to return with error, EEPROM-less silicon
+ *  would not be able to be reset or change link.
+ **/
+s32 igb_get_cfg_done_i210(struct e1000_hw *hw)
+{
+	s32 timeout = PHY_CFG_TIMEOUT;
+	u32 mask = E1000_NVM_CFG_DONE_PORT_0;
+
+	while (timeout) {
+		if (rd32(E1000_EEMNGCTL_I210) & mask)
+			break;
+		usleep_range(1000, 2000);
+		timeout--;
+	}
+	if (!timeout)
+		hw_dbg("MNG configuration cycle has not completed.\n");
+
+	return 0;
+}
diff --git a/kernel/drivers/net/ethernet/intel/igb/e1000_i210.h b/kernel/drivers/net/ethernet/intel/igb/e1000_i210.h
index 3442b6357..eaa68a50c 100644
--- a/kernel/drivers/net/ethernet/intel/igb/e1000_i210.h
+++ b/kernel/drivers/net/ethernet/intel/igb/e1000_i210.h
@@ -34,6 +34,7 @@ s32 igb_write_xmdio_reg(struct e1000_hw *hw, u16 addr, u8 dev_addr, u16 data);
 s32 igb_init_nvm_params_i210(struct e1000_hw *hw);
 bool igb_get_flash_presence_i210(struct e1000_hw *hw);
 s32 igb_pll_workaround_i210(struct e1000_hw *hw);
+s32 igb_get_cfg_done_i210(struct e1000_hw *hw);
 
 #define E1000_STM_OPCODE		0xDB00
 #define E1000_EEPROM_FLASH_SIZE_WORD	0x11
diff --git a/kernel/drivers/net/ethernet/intel/igb/e1000_regs.h b/kernel/drivers/net/ethernet/intel/igb/e1000_regs.h
index 4af2870e4..0fdcd4d1b 100644
--- a/kernel/drivers/net/ethernet/intel/igb/e1000_regs.h
+++ b/kernel/drivers/net/ethernet/intel/igb/e1000_regs.h
@@ -66,6 +66,7 @@
 #define E1000_PBA      0x01000  /* Packet Buffer Allocation - RW */
 #define E1000_PBS      0x01008  /* Packet Buffer Size */
 #define E1000_EEMNGCTL 0x01010  /* MNG EEprom Control */
+#define E1000_EEMNGCTL_I210 0x12030  /* MNG EEprom Control */
 #define E1000_EEARBC_I210 0x12024  /* EEPROM Auto Read Bus Control */
 #define E1000_EEWR     0x0102C  /* EEPROM Write Register - RW */
 #define E1000_I2CCMD   0x01028  /* SFPI2C Command Register - RW */
diff --git a/kernel/drivers/net/ethernet/intel/igb/igb.h b/kernel/drivers/net/ethernet/intel/igb/igb.h
index 1a2f1cc44..e3cb93bdb 100644
--- a/kernel/drivers/net/ethernet/intel/igb/igb.h
+++ b/kernel/drivers/net/ethernet/intel/igb/igb.h
@@ -389,6 +389,8 @@ struct igb_adapter {
 	u16 link_speed;
 	u16 link_duplex;
 
+	u8 __iomem *io_addr; /* Mainly for iounmap use */
+
 	struct work_struct reset_task;
 	struct work_struct watchdog_task;
 	bool fc_autoneg;
diff --git a/kernel/drivers/net/ethernet/intel/igb/igb_main.c b/kernel/drivers/net/ethernet/intel/igb/igb_main.c
index ea7b09887..fa3b4cbea 100644
--- a/kernel/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/kernel/drivers/net/ethernet/intel/igb/igb_main.c
@@ -2294,9 +2294,11 @@ static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	adapter->msg_enable = netif_msg_init(debug, DEFAULT_MSG_ENABLE);
 
 	err = -EIO;
-	hw->hw_addr = pci_iomap(pdev, 0, 0);
-	if (!hw->hw_addr)
+	adapter->io_addr = pci_iomap(pdev, 0, 0);
+	if (!adapter->io_addr)
 		goto err_ioremap;
+	/* hw->hw_addr can be altered, we'll use adapter->io_addr for unmap */
+	hw->hw_addr = adapter->io_addr;
 
 	netdev->netdev_ops = &igb_netdev_ops;
 	igb_set_ethtool_ops(netdev);
@@ -2656,7 +2658,7 @@ err_sw_init:
 #ifdef CONFIG_PCI_IOV
 	igb_disable_sriov(pdev);
 #endif
-	pci_iounmap(pdev, hw->hw_addr);
+	pci_iounmap(pdev, adapter->io_addr);
 err_ioremap:
 	free_netdev(netdev);
 err_alloc_etherdev:
@@ -2823,7 +2825,7 @@ static void igb_remove(struct pci_dev *pdev)
 
 	igb_clear_interrupt_scheme(adapter);
 
-	pci_iounmap(pdev, hw->hw_addr);
+	pci_iounmap(pdev, adapter->io_addr);
 	if (hw->flash_address)
 		iounmap(hw->flash_address);
 	pci_release_selected_regions(pdev,
@@ -2856,6 +2858,13 @@ static void igb_probe_vfs(struct igb_adapter *adapter)
 	if ((hw->mac.type == e1000_i210) || (hw->mac.type == e1000_i211))
 		return;
 
+	/* Of the below we really only want the effect of getting
+	 * IGB_FLAG_HAS_MSIX set (if available), without which
+	 * igb_enable_sriov() has no effect.
+	 */
+	igb_set_interrupt_capability(adapter, true);
+	igb_reset_interrupt_capability(adapter);
+
 	pci_sriov_set_totalvfs(pdev, 7);
 	igb_enable_sriov(pdev, max_vfs);