diff options
author | José Pekkarinen <jose.pekkarinen@nokia.com> | 2016-04-11 10:41:07 +0300 |
---|---|---|
committer | José Pekkarinen <jose.pekkarinen@nokia.com> | 2016-04-13 08:17:18 +0300 |
commit | e09b41010ba33a20a87472ee821fa407a5b8da36 (patch) | |
tree | d10dc367189862e7ca5c592f033dc3726e1df4e3 /kernel/drivers/net/ethernet/intel/e1000e/netdev.c | |
parent | f93b97fd65072de626c074dbe099a1fff05ce060 (diff) |
These changes are the raw update to linux-4.4.6-rt14. Kernel sources
are taken from kernel.org, and rt patch from the rt wiki download page.
During the rebasing, the following patch collided:
Force tick interrupt and get rid of softirq magic(I70131fb85).
Collisions have been removed because its logic was found on the
source already.
Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>
Diffstat (limited to 'kernel/drivers/net/ethernet/intel/e1000e/netdev.c')
-rw-r--r-- | kernel/drivers/net/ethernet/intel/e1000e/netdev.c | 295 |
1 files changed, 258 insertions, 37 deletions
diff --git a/kernel/drivers/net/ethernet/intel/e1000e/netdev.c b/kernel/drivers/net/ethernet/intel/e1000e/netdev.c index 68913d103..0a854a47d 100644 --- a/kernel/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/kernel/drivers/net/ethernet/intel/e1000e/netdev.c @@ -1,5 +1,5 @@ /* Intel PRO/1000 Linux driver - * Copyright(c) 1999 - 2014 Intel Corporation. + * Copyright(c) 1999 - 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, @@ -48,7 +48,7 @@ #define DRV_EXTRAVERSION "-k" -#define DRV_VERSION "2.3.2" DRV_EXTRAVERSION +#define DRV_VERSION "3.2.6" DRV_EXTRAVERSION char e1000e_driver_name[] = "e1000e"; const char e1000e_driver_version[] = DRV_VERSION; @@ -1737,12 +1737,6 @@ static void e1000_clean_rx_ring(struct e1000_ring *rx_ring) rx_ring->next_to_clean = 0; rx_ring->next_to_use = 0; adapter->flags2 &= ~FLAG2_IS_DISCARDING; - - writel(0, rx_ring->head); - if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA) - e1000e_update_rdt_wa(rx_ring, 0); - else - writel(0, rx_ring->tail); } static void e1000e_downshift_workaround(struct work_struct *work) @@ -2447,12 +2441,6 @@ static void e1000_clean_tx_ring(struct e1000_ring *tx_ring) tx_ring->next_to_use = 0; tx_ring->next_to_clean = 0; - - writel(0, tx_ring->head); - if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA) - e1000e_update_tdt_wa(tx_ring, 0); - else - writel(0, tx_ring->tail); } /** @@ -2705,7 +2693,7 @@ static int e1000e_poll(struct napi_struct *napi, int weight) if (work_done < weight) { if (adapter->itr_setting & 3) e1000_set_itr(adapter); - napi_complete(napi); + napi_complete_done(napi, work_done); if (!test_bit(__E1000_DOWN, &adapter->state)) { if (adapter->msix_entries) ew32(IMS, adapter->rx_ring->ims_val); @@ -2954,6 +2942,12 @@ static void e1000_configure_tx(struct e1000_adapter *adapter) tx_ring->head = adapter->hw.hw_addr + E1000_TDH(0); tx_ring->tail = adapter->hw.hw_addr + E1000_TDT(0); + writel(0, tx_ring->head); + if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA) + e1000e_update_tdt_wa(tx_ring, 0); + else + writel(0, tx_ring->tail); + /* Set the Tx Interrupt Delay register */ ew32(TIDV, adapter->tx_int_delay); /* Tx irq moderation */ @@ -3275,6 +3269,12 @@ static void e1000_configure_rx(struct e1000_adapter *adapter) rx_ring->head = adapter->hw.hw_addr + E1000_RDH(0); rx_ring->tail = adapter->hw.hw_addr + E1000_RDT(0); + writel(0, rx_ring->head); + if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA) + e1000e_update_rdt_wa(rx_ring, 0); + else + writel(0, rx_ring->tail); + /* Enable Receive Checksum Offload for TCP and UDP */ rxcsum = er32(RXCSUM); if (adapter->netdev->features & NETIF_F_RXCSUM) @@ -3525,22 +3525,30 @@ s32 e1000e_get_base_timinca(struct e1000_adapter *adapter, u32 *timinca) switch (hw->mac.type) { case e1000_pch2lan: case e1000_pch_lpt: - case e1000_pch_spt: - /* On I217, I218 and I219, the clock frequency is 25MHz - * or 96MHz as indicated by the System Clock Frequency - * Indication - */ - if (((hw->mac.type != e1000_pch_lpt) && - (hw->mac.type != e1000_pch_spt)) || - (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_SYSCFI)) { + if (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_SYSCFI) { /* Stable 96MHz frequency */ incperiod = INCPERIOD_96MHz; incvalue = INCVALUE_96MHz; shift = INCVALUE_SHIFT_96MHz; adapter->cc.shift = shift + INCPERIOD_SHIFT_96MHz; + } else { + /* Stable 25MHz frequency */ + incperiod = INCPERIOD_25MHz; + incvalue = INCVALUE_25MHz; + shift = INCVALUE_SHIFT_25MHz; + adapter->cc.shift = shift; + } + break; + case e1000_pch_spt: + if (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_SYSCFI) { + /* Stable 24MHz frequency */ + incperiod = INCPERIOD_24MHz; + incvalue = INCVALUE_24MHz; + shift = INCVALUE_SHIFT_24MHz; + adapter->cc.shift = shift; break; } - /* fall-through */ + return -EINVAL; case e1000_82574: case e1000_82583: /* Stable 25MHz frequency */ @@ -3788,6 +3796,108 @@ static void e1000_power_down_phy(struct e1000_adapter *adapter) } /** + * e1000_flush_tx_ring - remove all descriptors from the tx_ring + * + * We want to clear all pending descriptors from the TX ring. + * zeroing happens when the HW reads the regs. We assign the ring itself as + * the data of the next descriptor. We don't care about the data we are about + * to reset the HW. + */ +static void e1000_flush_tx_ring(struct e1000_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + struct e1000_ring *tx_ring = adapter->tx_ring; + struct e1000_tx_desc *tx_desc = NULL; + u32 tdt, tctl, txd_lower = E1000_TXD_CMD_IFCS; + u16 size = 512; + + tctl = er32(TCTL); + ew32(TCTL, tctl | E1000_TCTL_EN); + tdt = er32(TDT(0)); + BUG_ON(tdt != tx_ring->next_to_use); + tx_desc = E1000_TX_DESC(*tx_ring, tx_ring->next_to_use); + tx_desc->buffer_addr = tx_ring->dma; + + tx_desc->lower.data = cpu_to_le32(txd_lower | size); + tx_desc->upper.data = 0; + /* flush descriptors to memory before notifying the HW */ + wmb(); + tx_ring->next_to_use++; + if (tx_ring->next_to_use == tx_ring->count) + tx_ring->next_to_use = 0; + ew32(TDT(0), tx_ring->next_to_use); + mmiowb(); + usleep_range(200, 250); +} + +/** + * e1000_flush_rx_ring - remove all descriptors from the rx_ring + * + * Mark all descriptors in the RX ring as consumed and disable the rx ring + */ +static void e1000_flush_rx_ring(struct e1000_adapter *adapter) +{ + u32 rctl, rxdctl; + struct e1000_hw *hw = &adapter->hw; + + rctl = er32(RCTL); + ew32(RCTL, rctl & ~E1000_RCTL_EN); + e1e_flush(); + usleep_range(100, 150); + + rxdctl = er32(RXDCTL(0)); + /* zero the lower 14 bits (prefetch and host thresholds) */ + rxdctl &= 0xffffc000; + + /* update thresholds: prefetch threshold to 31, host threshold to 1 + * and make sure the granularity is "descriptors" and not "cache lines" + */ + rxdctl |= (0x1F | (1 << 8) | E1000_RXDCTL_THRESH_UNIT_DESC); + + ew32(RXDCTL(0), rxdctl); + /* momentarily enable the RX ring for the changes to take effect */ + ew32(RCTL, rctl | E1000_RCTL_EN); + e1e_flush(); + usleep_range(100, 150); + ew32(RCTL, rctl & ~E1000_RCTL_EN); +} + +/** + * e1000_flush_desc_rings - remove all descriptors from the descriptor rings + * + * In i219, the descriptor rings must be emptied before resetting the HW + * or before changing the device state to D3 during runtime (runtime PM). + * + * Failure to do this will cause the HW to enter a unit hang state which can + * only be released by PCI reset on the device + * + */ + +static void e1000_flush_desc_rings(struct e1000_adapter *adapter) +{ + u16 hang_state; + u32 fext_nvm11, tdlen; + struct e1000_hw *hw = &adapter->hw; + + /* First, disable MULR fix in FEXTNVM11 */ + fext_nvm11 = er32(FEXTNVM11); + fext_nvm11 |= E1000_FEXTNVM11_DISABLE_MULR_FIX; + ew32(FEXTNVM11, fext_nvm11); + /* do nothing if we're not in faulty state, or if the queue is empty */ + tdlen = er32(TDLEN(0)); + pci_read_config_word(adapter->pdev, PCICFG_DESC_RING_STATUS, + &hang_state); + if (!(hang_state & FLUSH_DESC_REQUIRED) || !tdlen) + return; + e1000_flush_tx_ring(adapter); + /* recheck, maybe the fault is caused by the rx ring */ + pci_read_config_word(adapter->pdev, PCICFG_DESC_RING_STATUS, + &hang_state); + if (hang_state & FLUSH_DESC_REQUIRED) + e1000_flush_rx_ring(adapter); +} + +/** * e1000e_reset - bring the hardware into a known good state * * This function boots the hardware and enables some settings that @@ -3943,6 +4053,8 @@ void e1000e_reset(struct e1000_adapter *adapter) } } + if (hw->mac.type == e1000_pch_spt) + e1000_flush_desc_rings(adapter); /* Allow time for pending master requests to run */ mac->ops.reset_hw(hw); @@ -4016,6 +4128,20 @@ void e1000e_reset(struct e1000_adapter *adapter) phy_data &= ~IGP02E1000_PM_SPD; e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, phy_data); } + if (hw->mac.type == e1000_pch_spt && adapter->int_mode == 0) { + u32 reg; + + /* Fextnvm7 @ 0xe4[2] = 1 */ + reg = er32(FEXTNVM7); + reg |= E1000_FEXTNVM7_SIDE_CLK_UNGATE; + ew32(FEXTNVM7, reg); + /* Fextnvm9 @ 0x5bb4[13:12] = 11 */ + reg = er32(FEXTNVM9); + reg |= E1000_FEXTNVM9_IOSFSB_CLKGATE_DIS | + E1000_FEXTNVM9_IOSFSB_CLKREQ_DIS; + ew32(FEXTNVM9, reg); + } + } int e1000e_up(struct e1000_adapter *adapter) @@ -4115,8 +4241,6 @@ void e1000e_down(struct e1000_adapter *adapter, bool reset) spin_unlock(&adapter->stats64_lock); e1000e_flush_descriptors(adapter); - e1000_clean_tx_ring(adapter->tx_ring); - e1000_clean_rx_ring(adapter->rx_ring); adapter->link_speed = 0; adapter->link_duplex = 0; @@ -4127,8 +4251,14 @@ void e1000e_down(struct e1000_adapter *adapter, bool reset) e1000_lv_jumbo_workaround_ich8lan(hw, false)) e_dbg("failed to disable jumbo frame workaround mode\n"); - if (reset && !pci_channel_offline(adapter->pdev)) - e1000e_reset(adapter); + if (!pci_channel_offline(adapter->pdev)) { + if (reset) + e1000e_reset(adapter); + else if (hw->mac.type == e1000_pch_spt) + e1000_flush_desc_rings(adapter); + } + e1000_clean_tx_ring(adapter->tx_ring); + e1000_clean_rx_ring(adapter->rx_ring); } void e1000e_reinit_locked(struct e1000_adapter *adapter) @@ -4150,11 +4280,29 @@ static cycle_t e1000e_cyclecounter_read(const struct cyclecounter *cc) struct e1000_adapter *adapter = container_of(cc, struct e1000_adapter, cc); struct e1000_hw *hw = &adapter->hw; + u32 systimel_1, systimel_2, systimeh; cycle_t systim, systim_next; - - /* latch SYSTIMH on read of SYSTIML */ - systim = (cycle_t)er32(SYSTIML); - systim |= (cycle_t)er32(SYSTIMH) << 32; + /* SYSTIMH latching upon SYSTIML read does not work well. + * This means that if SYSTIML overflows after we read it but before + * we read SYSTIMH, the value of SYSTIMH has been incremented and we + * will experience a huge non linear increment in the systime value + * to fix that we test for overflow and if true, we re-read systime. + */ + systimel_1 = er32(SYSTIML); + systimeh = er32(SYSTIMH); + systimel_2 = er32(SYSTIML); + /* Check for overflow. If there was no overflow, use the values */ + if (systimel_1 < systimel_2) { + systim = (cycle_t)systimel_1; + systim |= (cycle_t)systimeh << 32; + } else { + /* There was an overflow, read again SYSTIMH, and use + * systimel_2 + */ + systimeh = er32(SYSTIMH); + systim = (cycle_t)systimel_2; + systim |= (cycle_t)systimeh << 32; + } if ((hw->mac.type == e1000_82574) || (hw->mac.type == e1000_82583)) { u64 incvalue, time_delta, rem, temp; @@ -4451,6 +4599,7 @@ static int e1000_open(struct net_device *netdev) return 0; err_req_irq: + pm_qos_remove_request(&adapter->pm_qos_req); e1000e_release_hw_control(adapter); e1000_power_down_phy(adapter); e1000e_free_rx_resources(adapter->rx_ring); @@ -6179,6 +6328,33 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool runtime) return retval; } + /* Ensure that the appropriate bits are set in LPI_CTRL + * for EEE in Sx + */ + if ((hw->phy.type >= e1000_phy_i217) && + adapter->eee_advert && hw->dev_spec.ich8lan.eee_lp_ability) { + u16 lpi_ctrl = 0; + + retval = hw->phy.ops.acquire(hw); + if (!retval) { + retval = e1e_rphy_locked(hw, I82579_LPI_CTRL, + &lpi_ctrl); + if (!retval) { + if (adapter->eee_advert & + hw->dev_spec.ich8lan.eee_lp_ability & + I82579_EEE_100_SUPPORTED) + lpi_ctrl |= I82579_LPI_CTRL_100_ENABLE; + if (adapter->eee_advert & + hw->dev_spec.ich8lan.eee_lp_ability & + I82579_EEE_1000_SUPPORTED) + lpi_ctrl |= I82579_LPI_CTRL_1000_ENABLE; + + retval = e1e_wphy_locked(hw, I82579_LPI_CTRL, + lpi_ctrl); + } + } + hw->phy.ops.release(hw); + } /* Release control of h/w to f/w. If f/w is AMT enabled, this * would have already happened in close and is redundant. @@ -6217,13 +6393,14 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool runtime) } /** - * e1000e_disable_aspm - Disable ASPM states + * __e1000e_disable_aspm - Disable ASPM states * @pdev: pointer to PCI device struct * @state: bit-mask of ASPM states to disable + * @locked: indication if this context holds pci_bus_sem locked. * * Some devices *must* have certain ASPM states disabled per hardware errata. **/ -static void e1000e_disable_aspm(struct pci_dev *pdev, u16 state) +static void __e1000e_disable_aspm(struct pci_dev *pdev, u16 state, int locked) { struct pci_dev *parent = pdev->bus->self; u16 aspm_dis_mask = 0; @@ -6262,7 +6439,10 @@ static void e1000e_disable_aspm(struct pci_dev *pdev, u16 state) "L1" : ""); #ifdef CONFIG_PCIEASPM - pci_disable_link_state_locked(pdev, state); + if (locked) + pci_disable_link_state_locked(pdev, state); + else + pci_disable_link_state(pdev, state); /* Double-check ASPM control. If not disabled by the above, the * BIOS is preventing that from happening (or CONFIG_PCIEASPM is @@ -6285,6 +6465,32 @@ static void e1000e_disable_aspm(struct pci_dev *pdev, u16 state) aspm_dis_mask); } +/** + * e1000e_disable_aspm - Disable ASPM states. + * @pdev: pointer to PCI device struct + * @state: bit-mask of ASPM states to disable + * + * This function acquires the pci_bus_sem! + * Some devices *must* have certain ASPM states disabled per hardware errata. + **/ +static void e1000e_disable_aspm(struct pci_dev *pdev, u16 state) +{ + __e1000e_disable_aspm(pdev, state, 0); +} + +/** + * e1000e_disable_aspm_locked Disable ASPM states. + * @pdev: pointer to PCI device struct + * @state: bit-mask of ASPM states to disable + * + * This function must be called with pci_bus_sem acquired! + * Some devices *must* have certain ASPM states disabled per hardware errata. + **/ +static void e1000e_disable_aspm_locked(struct pci_dev *pdev, u16 state) +{ + __e1000e_disable_aspm(pdev, state, 1); +} + #ifdef CONFIG_PM static int __e1000_resume(struct pci_dev *pdev) { @@ -6576,7 +6782,7 @@ static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev) if (adapter->flags2 & FLAG2_DISABLE_ASPM_L1) aspm_disable_flag |= PCIE_LINK_STATE_L1; if (aspm_disable_flag) - e1000e_disable_aspm(pdev, aspm_disable_flag); + e1000e_disable_aspm_locked(pdev, aspm_disable_flag); err = pci_enable_device_mem(pdev); if (err) { @@ -6676,6 +6882,19 @@ static void e1000_eeprom_checks(struct e1000_adapter *adapter) } } +static netdev_features_t e1000_fix_features(struct net_device *netdev, + netdev_features_t features) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + + /* Jumbo frame workaround on 82579 and newer requires CRC be stripped */ + if ((hw->mac.type >= e1000_pch2lan) && (netdev->mtu > ETH_DATA_LEN)) + features &= ~NETIF_F_RXFCS; + + return features; +} + static int e1000_set_features(struct net_device *netdev, netdev_features_t features) { @@ -6732,6 +6951,8 @@ static const struct net_device_ops e1000e_netdev_ops = { .ndo_poll_controller = e1000_netpoll, #endif .ndo_set_features = e1000_set_features, + .ndo_fix_features = e1000_fix_features, + .ndo_features_check = passthru_features_check, }; /** @@ -7287,7 +7508,7 @@ static int __init e1000_init_module(void) pr_info("Intel(R) PRO/1000 Network Driver - %s\n", e1000e_driver_version); - pr_info("Copyright(c) 1999 - 2014 Intel Corporation.\n"); + pr_info("Copyright(c) 1999 - 2015 Intel Corporation.\n"); ret = pci_register_driver(&e1000_driver); return ret; |