Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

1 files changed, 130 insertions, 0 deletions

diff --git a/kernel/drivers/net/ethernet/chelsio/Kconfig b/kernel/drivers/net/ethernet/chelsio/Kconfig
new file mode 100644
index 000000000..7daa088a9
--- /dev/null
+++ b/kernel/drivers/net/ethernet/chelsio/Kconfig
@@ -0,0 +1,130 @@
+#
+# Chelsio device configuration
+#
+
+config NET_VENDOR_CHELSIO
+	bool "Chelsio devices"
+	default y
+	depends on PCI
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about Chelsio devices. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_CHELSIO
+
+config CHELSIO_T1
+	tristate "Chelsio 10Gb Ethernet support"
+	depends on PCI
+	select CRC32
+	select MDIO
+	---help---
+	  This driver supports Chelsio gigabit and 10-gigabit
+	  Ethernet cards. More information about adapter features and
+	  performance tuning is in <file:Documentation/networking/cxgb.txt>.
+
+	  For general information about Chelsio and our products, visit
+	  our website at <http://www.chelsio.com>.
+
+	  For customer support, please visit our customer support page at
+	  <http://www.chelsio.com/support.html>.
+
+	  Please send feedback to <linux-bugs@chelsio.com>.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called cxgb.
+
+config CHELSIO_T1_1G
+	bool "Chelsio gigabit Ethernet support"
+	depends on CHELSIO_T1
+	---help---
+	  Enables support for Chelsio's gigabit Ethernet PCI cards.  If you
+	  are using only 10G cards say 'N' here.
+
+config CHELSIO_T3
+	tristate "Chelsio Communications T3 10Gb Ethernet support"
+	depends on PCI && INET
+	select FW_LOADER
+	select MDIO
+	---help---
+	  This driver supports Chelsio T3-based gigabit and 10Gb Ethernet
+	  adapters.
+
+	  For general information about Chelsio and our products, visit
+	  our website at <http://www.chelsio.com>.
+
+	  For customer support, please visit our customer support page at
+	  <http://www.chelsio.com/support.html>.
+
+	  Please send feedback to <linux-bugs@chelsio.com>.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called cxgb3.
+
+config CHELSIO_T4
+	tristate "Chelsio Communications T4/T5 Ethernet support"
+	depends on PCI && (IPV6 || IPV6=n)
+	select FW_LOADER
+	select MDIO
+	---help---
+	  This driver supports Chelsio T4 and T5 based gigabit, 10Gb Ethernet
+	  adapter and T5 based 40Gb Ethernet adapter.
+
+	  For general information about Chelsio and our products, visit
+	  our website at <http://www.chelsio.com>.
+
+	  For customer support, please visit our customer support page at
+	  <http://www.chelsio.com/support.html>.
+
+	  Please send feedback to <linux-bugs@chelsio.com>.
+
+	  To compile this driver as a module choose M here; the module
+	  will be called cxgb4.
+
+config CHELSIO_T4_DCB
+	bool "Data Center Bridging (DCB) Support for Chelsio T4/T5 cards"
+	default n
+	depends on CHELSIO_T4 && DCB
+	---help---
+	  Enable DCB support through rtNetlink interface.
+	  Say Y here if you want to enable Data Center Bridging (DCB) support
+	  in the driver.
+
+	  If unsure, say N.
+
+config CHELSIO_T4_FCOE
+	bool "Fibre Channel over Ethernet (FCoE) Support for Chelsio T5 cards"
+	default n
+	depends on CHELSIO_T4 && CHELSIO_T4_DCB && FCOE
+	---help---
+	  Enable FCoE offload features.
+	  Say Y here if you want to enable Fibre Channel over Ethernet (FCoE) support
+	  in the driver.
+
+	  If unsure, say N.
+
+config CHELSIO_T4VF
+	tristate "Chelsio Communications T4/T5 Virtual Function Ethernet support"
+	depends on PCI
+	---help---
+	  This driver supports Chelsio T4 and T5 based gigabit, 10Gb Ethernet
+	  adapters and T5 based 40Gb Ethernet adapters with PCI-E SR-IOV Virtual
+	  Functions.
+
+	  For general information about Chelsio and our products, visit
+	  our website at <http://www.chelsio.com>.
+
+	  For customer support, please visit our customer support page at
+	  <http://www.chelsio.com/support.html>.
+
+	  Please send feedback to <linux-bugs@chelsio.com>.
+
+	  To compile this driver as a module choose M here; the module
+	  will be called cxgb4vf.
+
+endif # NET_VENDOR_CHELSIO