These changes are the raw update to linux-4.4.6-rt14. Kernel sources

are taken from kernel.org, and rt patch from the rt wiki download page.

During the rebasing, the following patch collided:

Force tick interrupt and get rid of softirq magic(I70131fb85).

Collisions have been removed because its logic was found on the
source already.

Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>

1 files changed, 227 insertions, 0 deletions

diff --git a/kernel/drivers/net/ethernet/cavium/liquidio/octeon_nic.h b/kernel/drivers/net/ethernet/cavium/liquidio/octeon_nic.h
new file mode 100644
index 000000000..0238857c8
--- /dev/null
+++ b/kernel/drivers/net/ethernet/cavium/liquidio/octeon_nic.h
@@ -0,0 +1,227 @@
+/**********************************************************************
+ * Author: Cavium, Inc.
+ *
+ * Contact: support@cavium.com
+ *          Please include "LiquidIO" in the subject.
+ *
+ * Copyright (c) 2003-2015 Cavium, Inc.
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+ * NONINFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * This file may also be available under a different license from Cavium.
+ * Contact Cavium, Inc. for more information
+ **********************************************************************/
+
+/*!  \file octeon_nic.h
+ *   \brief Host NIC Driver: Routine to send network data &
+ *   control packet to Octeon.
+ */
+
+#ifndef __OCTEON_NIC_H__
+#define  __OCTEON_NIC_H__
+
+/* Maximum number of 8-byte words can be sent in a NIC control message.
+ */
+#define  MAX_NCTRL_UDD  32
+
+typedef void (*octnic_ctrl_pkt_cb_fn_t) (void *);
+
+/* Structure of control information passed by the NIC module to the OSI
+ * layer when sending control commands to Octeon device software.
+ */
+struct octnic_ctrl_pkt {
+	/** Command to be passed to the Octeon device software. */
+	union octnet_cmd ncmd;
+
+	/** Send buffer  */
+	void *data;
+	u64 dmadata;
+
+	/** Response buffer */
+	void *rdata;
+	u64 dmardata;
+
+	/** Additional data that may be needed by some commands. */
+	u64 udd[MAX_NCTRL_UDD];
+
+	/** Time to wait for Octeon software to respond to this control command.
+	 *  If wait_time is 0, OSI assumes no response is expected.
+	 */
+	size_t wait_time;
+
+	/** The network device that issued the control command. */
+	u64 netpndev;
+
+	/** Callback function called when the command has been fetched */
+	octnic_ctrl_pkt_cb_fn_t cb_fn;
+};
+
+#define MAX_UDD_SIZE(nctrl) (sizeof(nctrl->udd))
+
+/** Structure of data information passed by the NIC module to the OSI
+ * layer when forwarding data to Octeon device software.
+ */
+struct octnic_data_pkt {
+	/** Pointer to information maintained by NIC module for this packet. The
+	 *  OSI layer passes this as-is to the driver.
+	 */
+	void *buf;
+
+	/** Type of buffer passed in "buf" above. */
+	u32 reqtype;
+
+	/** Total data bytes to be transferred in this command. */
+	u32 datasize;
+
+	/** Command to be passed to the Octeon device software. */
+	struct octeon_instr_64B cmd;
+
+	/** Input queue to use to send this command. */
+	u32 q_no;
+
+};
+
+/** Structure passed by NIC module to OSI layer to prepare a command to send
+ * network data to Octeon.
+ */
+union octnic_cmd_setup {
+	struct {
+		u32 ifidx:8;
+		u32 cksum_offset:7;
+		u32 gather:1;
+		u32 timestamp:1;
+		u32 ipv4opts_ipv6exthdr:2;
+		u32 ip_csum:1;
+		u32 tnl_csum:1;
+
+		u32 rsvd:11;
+		union {
+			u32 datasize;
+			u32 gatherptrs;
+		} u;
+	} s;
+
+	u64 u64;
+
+};
+
+struct octnic_ctrl_params {
+	u32 resp_order;
+};
+
+static inline int octnet_iq_is_full(struct octeon_device *oct, u32 q_no)
+{
+	return ((u32)atomic_read(&oct->instr_queue[q_no]->instr_pending)
+		>= (oct->instr_queue[q_no]->max_count - 2));
+}
+
+/** Utility function to prepare a 64B NIC instruction based on a setup command
+ * @param cmd - pointer to instruction to be filled in.
+ * @param setup - pointer to the setup structure
+ * @param q_no - which queue for back pressure
+ *
+ * Assumes the cmd instruction is pre-allocated, but no fields are filled in.
+ */
+static inline void
+octnet_prepare_pci_cmd(struct octeon_instr_64B *cmd,
+		       union octnic_cmd_setup *setup, u32 tag)
+{
+	struct octeon_instr_ih *ih;
+	struct octeon_instr_irh *irh;
+	union octnic_packet_params packet_params;
+
+	memset(cmd, 0, sizeof(struct octeon_instr_64B));
+
+	ih = (struct octeon_instr_ih *)&cmd->ih;
+
+	/* assume that rflag is cleared so therefore front data will only have
+	 * irh and ossp[1] and ossp[2] for a total of 24 bytes
+	 */
+	ih->fsz = 24;
+
+	ih->tagtype = ORDERED_TAG;
+	ih->grp = DEFAULT_POW_GRP;
+
+	if (tag)
+		ih->tag = tag;
+	else
+		ih->tag = LIO_DATA(setup->s.ifidx);
+
+	ih->raw = 1;
+	ih->qos = (setup->s.ifidx & 3) + 4;	/* map qos based on interface */
+
+	if (!setup->s.gather) {
+		ih->dlengsz = setup->s.u.datasize;
+	} else {
+		ih->gather = 1;
+		ih->dlengsz = setup->s.u.gatherptrs;
+	}
+
+	irh = (struct octeon_instr_irh *)&cmd->irh;
+
+	irh->opcode = OPCODE_NIC;
+	irh->subcode = OPCODE_NIC_NW_DATA;
+
+	packet_params.u32 = 0;
+
+	if (setup->s.cksum_offset) {
+		packet_params.s.csoffset = setup->s.cksum_offset;
+		packet_params.s.ipv4opts_ipv6exthdr =
+						setup->s.ipv4opts_ipv6exthdr;
+	}
+
+	packet_params.s.ip_csum = setup->s.ip_csum;
+	packet_params.s.tnl_csum = setup->s.tnl_csum;
+	packet_params.s.ifidx = setup->s.ifidx;
+	packet_params.s.tsflag = setup->s.timestamp;
+
+	irh->ossp = packet_params.u32;
+}
+
+/** Allocate and a soft command with space for a response immediately following
+ * the commnad.
+ * @param oct - octeon device pointer
+ * @param cmd - pointer to the command structure, pre-filled for everything
+ * except the response.
+ * @param rdatasize - size in bytes of the response.
+ *
+ * @returns pointer to allocated buffer with command copied into it, and
+ * response space immediately following.
+ */
+void *
+octeon_alloc_soft_command_resp(struct octeon_device    *oct,
+			       struct octeon_instr_64B *cmd,
+			       size_t		       rdatasize);
+
+/** Send a NIC data packet to the device
+ * @param oct - octeon device pointer
+ * @param ndata - control structure with queueing, and buffer information
+ *
+ * @returns IQ_FAILED if it failed to add to the input queue. IQ_STOP if it the
+ * queue should be stopped, and IQ_SEND_OK if it sent okay.
+ */
+int octnet_send_nic_data_pkt(struct octeon_device *oct,
+			     struct octnic_data_pkt *ndata, u32 xmit_more);
+
+/** Send a NIC control packet to the device
+ * @param oct - octeon device pointer
+ * @param nctrl - control structure with command, timout, and callback info
+ * @param nparams - response control structure
+ *
+ * @returns IQ_FAILED if it failed to add to the input queue. IQ_STOP if it the
+ * queue should be stopped, and IQ_SEND_OK if it sent okay.
+ */
+int
+octnet_send_nic_ctrl_pkt(struct octeon_device *oct,
+			 struct octnic_ctrl_pkt *nctrl,
+			 struct octnic_ctrl_params nparams);
+
+#endif