Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

12 files changed, 5186 insertions, 0 deletions

diff --git a/kernel/drivers/net/dsa/Kconfig b/kernel/drivers/net/dsa/Kconfig
new file mode 100644
index 000000000..18550c7eb
--- /dev/null
+++ b/kernel/drivers/net/dsa/Kconfig
@@ -0,0 +1,68 @@
+menu "Distributed Switch Architecture drivers"
+	depends on HAVE_NET_DSA
+
+config NET_DSA_MV88E6XXX
+	tristate
+	default n
+
+config NET_DSA_MV88E6060
+	tristate "Marvell 88E6060 ethernet switch chip support"
+	depends on NET_DSA
+	select NET_DSA_TAG_TRAILER
+	---help---
+	  This enables support for the Marvell 88E6060 ethernet switch
+	  chip.
+
+config NET_DSA_MV88E6XXX_NEED_PPU
+	bool
+	default n
+
+config NET_DSA_MV88E6131
+	tristate "Marvell 88E6085/6095/6095F/6131 ethernet switch chip support"
+	depends on NET_DSA
+	select NET_DSA_MV88E6XXX
+	select NET_DSA_MV88E6XXX_NEED_PPU
+	select NET_DSA_TAG_DSA
+	---help---
+	  This enables support for the Marvell 88E6085/6095/6095F/6131
+	  ethernet switch chips.
+
+config NET_DSA_MV88E6123_61_65
+	tristate "Marvell 88E6123/6161/6165 ethernet switch chip support"
+	depends on NET_DSA
+	select NET_DSA_MV88E6XXX
+	select NET_DSA_TAG_EDSA
+	---help---
+	  This enables support for the Marvell 88E6123/6161/6165
+	  ethernet switch chips.
+
+config NET_DSA_MV88E6171
+	tristate "Marvell 88E6171/6172 ethernet switch chip support"
+	depends on NET_DSA
+	select NET_DSA_MV88E6XXX
+	select NET_DSA_TAG_EDSA
+	---help---
+	  This enables support for the Marvell 88E6171/6172 ethernet switch
+	  chips.
+
+config NET_DSA_MV88E6352
+	tristate "Marvell 88E6176/88E6352 ethernet switch chip support"
+	depends on NET_DSA
+	select NET_DSA_MV88E6XXX
+	select NET_DSA_TAG_EDSA
+	---help---
+	  This enables support for the Marvell 88E6176 and 88E6352 ethernet
+	  switch chips.
+
+config NET_DSA_BCM_SF2
+	tristate "Broadcom Starfighter 2 Ethernet switch support"
+	depends on HAS_IOMEM && NET_DSA
+	select NET_DSA_TAG_BRCM
+	select FIXED_PHY
+	select BCM7XXX_PHY
+	select MDIO_BCM_UNIMAC
+	---help---
+	  This enables support for the Broadcom Starfighter 2 Ethernet
+	  switch chips.
+
+endmenu
diff --git a/kernel/drivers/net/dsa/Makefile b/kernel/drivers/net/dsa/Makefile
new file mode 100644
index 000000000..e2d51c4b9
--- /dev/null
+++ b/kernel/drivers/net/dsa/Makefile
@@ -0,0 +1,16 @@
+obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
+obj-$(CONFIG_NET_DSA_MV88E6XXX) += mv88e6xxx_drv.o
+mv88e6xxx_drv-y += mv88e6xxx.o
+ifdef CONFIG_NET_DSA_MV88E6123_61_65
+mv88e6xxx_drv-y += mv88e6123_61_65.o
+endif
+ifdef CONFIG_NET_DSA_MV88E6131
+mv88e6xxx_drv-y += mv88e6131.o
+endif
+ifdef CONFIG_NET_DSA_MV88E6352
+mv88e6xxx_drv-y += mv88e6352.o
+endif
+ifdef CONFIG_NET_DSA_MV88E6171
+mv88e6xxx_drv-y += mv88e6171.o
+endif
+obj-$(CONFIG_NET_DSA_BCM_SF2)	+= bcm_sf2.o
diff --git a/kernel/drivers/net/dsa/bcm_sf2.c b/kernel/drivers/net/dsa/bcm_sf2.c
new file mode 100644
index 000000000..cedb572bf
--- /dev/null
+++ b/kernel/drivers/net/dsa/bcm_sf2.c
@@ -0,0 +1,1091 @@
+/*
+ * Broadcom Starfighter 2 DSA switch driver
+ *
+ * Copyright (C) 2014, Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/phy.h>
+#include <linux/phy_fixed.h>
+#include <linux/mii.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include <net/dsa.h>
+#include <linux/ethtool.h>
+#include <linux/if_bridge.h>
+
+#include "bcm_sf2.h"
+#include "bcm_sf2_regs.h"
+
+/* String, offset, and register size in bytes if different from 4 bytes */
+static const struct bcm_sf2_hw_stats bcm_sf2_mib[] = {
+	{ "TxOctets",		0x000, 8	},
+	{ "TxDropPkts",		0x020		},
+	{ "TxQPKTQ0",		0x030		},
+	{ "TxBroadcastPkts",	0x040		},
+	{ "TxMulticastPkts",	0x050		},
+	{ "TxUnicastPKts",	0x060		},
+	{ "TxCollisions",	0x070		},
+	{ "TxSingleCollision",	0x080		},
+	{ "TxMultipleCollision", 0x090		},
+	{ "TxDeferredCollision", 0x0a0		},
+	{ "TxLateCollision",	0x0b0		},
+	{ "TxExcessiveCollision", 0x0c0		},
+	{ "TxFrameInDisc",	0x0d0		},
+	{ "TxPausePkts",	0x0e0		},
+	{ "TxQPKTQ1",		0x0f0		},
+	{ "TxQPKTQ2",		0x100		},
+	{ "TxQPKTQ3",		0x110		},
+	{ "TxQPKTQ4",		0x120		},
+	{ "TxQPKTQ5",		0x130		},
+	{ "RxOctets",		0x140, 8	},
+	{ "RxUndersizePkts",	0x160		},
+	{ "RxPausePkts",	0x170		},
+	{ "RxPkts64Octets",	0x180		},
+	{ "RxPkts65to127Octets", 0x190		},
+	{ "RxPkts128to255Octets", 0x1a0		},
+	{ "RxPkts256to511Octets", 0x1b0		},
+	{ "RxPkts512to1023Octets", 0x1c0	},
+	{ "RxPkts1024toMaxPktsOctets", 0x1d0	},
+	{ "RxOversizePkts",	0x1e0		},
+	{ "RxJabbers",		0x1f0		},
+	{ "RxAlignmentErrors",	0x200		},
+	{ "RxFCSErrors",	0x210		},
+	{ "RxGoodOctets",	0x220, 8	},
+	{ "RxDropPkts",		0x240		},
+	{ "RxUnicastPkts",	0x250		},
+	{ "RxMulticastPkts",	0x260		},
+	{ "RxBroadcastPkts",	0x270		},
+	{ "RxSAChanges",	0x280		},
+	{ "RxFragments",	0x290		},
+	{ "RxJumboPkt",		0x2a0		},
+	{ "RxSymblErr",		0x2b0		},
+	{ "InRangeErrCount",	0x2c0		},
+	{ "OutRangeErrCount",	0x2d0		},
+	{ "EEELpiEvent",	0x2e0		},
+	{ "EEELpiDuration",	0x2f0		},
+	{ "RxDiscard",		0x300, 8	},
+	{ "TxQPKTQ6",		0x320		},
+	{ "TxQPKTQ7",		0x330		},
+	{ "TxPkts64Octets",	0x340		},
+	{ "TxPkts65to127Octets", 0x350		},
+	{ "TxPkts128to255Octets", 0x360		},
+	{ "TxPkts256to511Ocets", 0x370		},
+	{ "TxPkts512to1023Ocets", 0x380		},
+	{ "TxPkts1024toMaxPktOcets", 0x390	},
+};
+
+#define BCM_SF2_STATS_SIZE	ARRAY_SIZE(bcm_sf2_mib)
+
+static void bcm_sf2_sw_get_strings(struct dsa_switch *ds,
+				   int port, uint8_t *data)
+{
+	unsigned int i;
+
+	for (i = 0; i < BCM_SF2_STATS_SIZE; i++)
+		memcpy(data + i * ETH_GSTRING_LEN,
+		       bcm_sf2_mib[i].string, ETH_GSTRING_LEN);
+}
+
+static void bcm_sf2_sw_get_ethtool_stats(struct dsa_switch *ds,
+					 int port, uint64_t *data)
+{
+	struct bcm_sf2_priv *priv = ds_to_priv(ds);
+	const struct bcm_sf2_hw_stats *s;
+	unsigned int i;
+	u64 val = 0;
+	u32 offset;
+
+	mutex_lock(&priv->stats_mutex);
+
+	/* Now fetch the per-port counters */
+	for (i = 0; i < BCM_SF2_STATS_SIZE; i++) {
+		s = &bcm_sf2_mib[i];
+
+		/* Do a latched 64-bit read if needed */
+		offset = s->reg + CORE_P_MIB_OFFSET(port);
+		if (s->sizeof_stat == 8)
+			val = core_readq(priv, offset);
+		else
+			val = core_readl(priv, offset);
+
+		data[i] = (u64)val;
+	}
+
+	mutex_unlock(&priv->stats_mutex);
+}
+
+static int bcm_sf2_sw_get_sset_count(struct dsa_switch *ds)
+{
+	return BCM_SF2_STATS_SIZE;
+}
+
+static char *bcm_sf2_sw_probe(struct device *host_dev, int sw_addr)
+{
+	return "Broadcom Starfighter 2";
+}
+
+static void bcm_sf2_imp_vlan_setup(struct dsa_switch *ds, int cpu_port)
+{
+	struct bcm_sf2_priv *priv = ds_to_priv(ds);
+	unsigned int i;
+	u32 reg;
+
+	/* Enable the IMP Port to be in the same VLAN as the other ports
+	 * on a per-port basis such that we only have Port i and IMP in
+	 * the same VLAN.
+	 */
+	for (i = 0; i < priv->hw_params.num_ports; i++) {
+		if (!((1 << i) & ds->phys_port_mask))
+			continue;
+
+		reg = core_readl(priv, CORE_PORT_VLAN_CTL_PORT(i));
+		reg |= (1 << cpu_port);
+		core_writel(priv, reg, CORE_PORT_VLAN_CTL_PORT(i));
+	}
+}
+
+static void bcm_sf2_imp_setup(struct dsa_switch *ds, int port)
+{
+	struct bcm_sf2_priv *priv = ds_to_priv(ds);
+	u32 reg, val;
+
+	/* Enable the port memories */
+	reg = core_readl(priv, CORE_MEM_PSM_VDD_CTRL);
+	reg &= ~P_TXQ_PSM_VDD(port);
+	core_writel(priv, reg, CORE_MEM_PSM_VDD_CTRL);
+
+	/* Enable Broadcast, Multicast, Unicast forwarding to IMP port */
+	reg = core_readl(priv, CORE_IMP_CTL);
+	reg |= (RX_BCST_EN | RX_MCST_EN | RX_UCST_EN);
+	reg &= ~(RX_DIS | TX_DIS);
+	core_writel(priv, reg, CORE_IMP_CTL);
+
+	/* Enable forwarding */
+	core_writel(priv, SW_FWDG_EN, CORE_SWMODE);
+
+	/* Enable IMP port in dumb mode */
+	reg = core_readl(priv, CORE_SWITCH_CTRL);
+	reg |= MII_DUMB_FWDG_EN;
+	core_writel(priv, reg, CORE_SWITCH_CTRL);
+
+	/* Resolve which bit controls the Broadcom tag */
+	switch (port) {
+	case 8:
+		val = BRCM_HDR_EN_P8;
+		break;
+	case 7:
+		val = BRCM_HDR_EN_P7;
+		break;
+	case 5:
+		val = BRCM_HDR_EN_P5;
+		break;
+	default:
+		val = 0;
+		break;
+	}
+
+	/* Enable Broadcom tags for IMP port */
+	reg = core_readl(priv, CORE_BRCM_HDR_CTRL);
+	reg |= val;
+	core_writel(priv, reg, CORE_BRCM_HDR_CTRL);
+
+	/* Enable reception Broadcom tag for CPU TX (switch RX) to
+	 * allow us to tag outgoing frames
+	 */
+	reg = core_readl(priv, CORE_BRCM_HDR_RX_DIS);
+	reg &= ~(1 << port);
+	core_writel(priv, reg, CORE_BRCM_HDR_RX_DIS);
+
+	/* Enable transmission of Broadcom tags from the switch (CPU RX) to
+	 * allow delivering frames to the per-port net_devices
+	 */
+	reg = core_readl(priv, CORE_BRCM_HDR_TX_DIS);
+	reg &= ~(1 << port);
+	core_writel(priv, reg, CORE_BRCM_HDR_TX_DIS);
+
+	/* Force link status for IMP port */
+	reg = core_readl(priv, CORE_STS_OVERRIDE_IMP);
+	reg |= (MII_SW_OR | LINK_STS);
+	core_writel(priv, reg, CORE_STS_OVERRIDE_IMP);
+}
+
+static void bcm_sf2_eee_enable_set(struct dsa_switch *ds, int port, bool enable)
+{
+	struct bcm_sf2_priv *priv = ds_to_priv(ds);
+	u32 reg;
+
+	reg = core_readl(priv, CORE_EEE_EN_CTRL);
+	if (enable)
+		reg |= 1 << port;
+	else
+		reg &= ~(1 << port);
+	core_writel(priv, reg, CORE_EEE_EN_CTRL);
+}
+
+static void bcm_sf2_gphy_enable_set(struct dsa_switch *ds, bool enable)
+{
+	struct bcm_sf2_priv *priv = ds_to_priv(ds);
+	u32 reg;
+
+	reg = reg_readl(priv, REG_SPHY_CNTRL);
+	if (enable) {
+		reg |= PHY_RESET;
+		reg &= ~(EXT_PWR_DOWN | IDDQ_BIAS | CK25_DIS);
+		reg_writel(priv, reg, REG_SPHY_CNTRL);
+		udelay(21);
+		reg = reg_readl(priv, REG_SPHY_CNTRL);
+		reg &= ~PHY_RESET;
+	} else {
+		reg |= EXT_PWR_DOWN | IDDQ_BIAS | PHY_RESET;
+		reg_writel(priv, reg, REG_SPHY_CNTRL);
+		mdelay(1);
+		reg |= CK25_DIS;
+	}
+	reg_writel(priv, reg, REG_SPHY_CNTRL);
+
+	/* Use PHY-driven LED signaling */
+	if (!enable) {
+		reg = reg_readl(priv, REG_LED_CNTRL(0));
+		reg |= SPDLNK_SRC_SEL;
+		reg_writel(priv, reg, REG_LED_CNTRL(0));
+	}
+}
+
+static int bcm_sf2_port_setup(struct dsa_switch *ds, int port,
+			      struct phy_device *phy)
+{
+	struct bcm_sf2_priv *priv = ds_to_priv(ds);
+	s8 cpu_port = ds->dst[ds->index].cpu_port;
+	u32 reg;
+
+	/* Clear the memory power down */
+	reg = core_readl(priv, CORE_MEM_PSM_VDD_CTRL);
+	reg &= ~P_TXQ_PSM_VDD(port);
+	core_writel(priv, reg, CORE_MEM_PSM_VDD_CTRL);
+
+	/* Clear the Rx and Tx disable bits and set to no spanning tree */
+	core_writel(priv, 0, CORE_G_PCTL_PORT(port));
+
+	/* Re-enable the GPHY and re-apply workarounds */
+	if (port == 0 && priv->hw_params.num_gphy == 1) {
+		bcm_sf2_gphy_enable_set(ds, true);
+		if (phy) {
+			/* if phy_stop() has been called before, phy
+			 * will be in halted state, and phy_start()
+			 * will call resume.
+			 *
+			 * the resume path does not configure back
+			 * autoneg settings, and since we hard reset
+			 * the phy manually here, we need to reset the
+			 * state machine also.
+			 */
+			phy->state = PHY_READY;
+			phy_init_hw(phy);
+		}
+	}
+
+	/* Enable port 7 interrupts to get notified */
+	if (port == 7)
+		intrl2_1_mask_clear(priv, P_IRQ_MASK(P7_IRQ_OFF));
+
+	/* Set this port, and only this one to be in the default VLAN,
+	 * if member of a bridge, restore its membership prior to
+	 * bringing down this port.
+	 */
+	reg = core_readl(priv, CORE_PORT_VLAN_CTL_PORT(port));
+	reg &= ~PORT_VLAN_CTRL_MASK;
+	reg |= (1 << port);
+	reg |= priv->port_sts[port].vlan_ctl_mask;
+	core_writel(priv, reg, CORE_PORT_VLAN_CTL_PORT(port));
+
+	bcm_sf2_imp_vlan_setup(ds, cpu_port);
+
+	/* If EEE was enabled, restore it */
+	if (priv->port_sts[port].eee.eee_enabled)
+		bcm_sf2_eee_enable_set(ds, port, true);
+
+	return 0;
+}
+
+static void bcm_sf2_port_disable(struct dsa_switch *ds, int port,
+				 struct phy_device *phy)
+{
+	struct bcm_sf2_priv *priv = ds_to_priv(ds);
+	u32 off, reg;
+
+	if (priv->wol_ports_mask & (1 << port))
+		return;
+
+	if (port == 7) {
+		intrl2_1_mask_set(priv, P_IRQ_MASK(P7_IRQ_OFF));
+		intrl2_1_writel(priv, P_IRQ_MASK(P7_IRQ_OFF), INTRL2_CPU_CLEAR);
+	}
+
+	if (port == 0 && priv->hw_params.num_gphy == 1)
+		bcm_sf2_gphy_enable_set(ds, false);
+
+	if (dsa_is_cpu_port(ds, port))
+		off = CORE_IMP_CTL;
+	else
+		off = CORE_G_PCTL_PORT(port);
+
+	reg = core_readl(priv, off);
+	reg |= RX_DIS | TX_DIS;
+	core_writel(priv, reg, off);
+
+	/* Power down the port memory */
+	reg = core_readl(priv, CORE_MEM_PSM_VDD_CTRL);
+	reg |= P_TXQ_PSM_VDD(port);
+	core_writel(priv, reg, CORE_MEM_PSM_VDD_CTRL);
+}
+
+/* Returns 0 if EEE was not enabled, or 1 otherwise
+ */
+static int bcm_sf2_eee_init(struct dsa_switch *ds, int port,
+			    struct phy_device *phy)
+{
+	struct bcm_sf2_priv *priv = ds_to_priv(ds);
+	struct ethtool_eee *p = &priv->port_sts[port].eee;
+	int ret;
+
+	p->supported = (SUPPORTED_1000baseT_Full | SUPPORTED_100baseT_Full);
+
+	ret = phy_init_eee(phy, 0);
+	if (ret)
+		return 0;
+
+	bcm_sf2_eee_enable_set(ds, port, true);
+
+	return 1;
+}
+
+static int bcm_sf2_sw_get_eee(struct dsa_switch *ds, int port,
+			      struct ethtool_eee *e)
+{
+	struct bcm_sf2_priv *priv = ds_to_priv(ds);
+	struct ethtool_eee *p = &priv->port_sts[port].eee;
+	u32 reg;
+
+	reg = core_readl(priv, CORE_EEE_LPI_INDICATE);
+	e->eee_enabled = p->eee_enabled;
+	e->eee_active = !!(reg & (1 << port));
+
+	return 0;
+}
+
+static int bcm_sf2_sw_set_eee(struct dsa_switch *ds, int port,
+			      struct phy_device *phydev,
+			      struct ethtool_eee *e)
+{
+	struct bcm_sf2_priv *priv = ds_to_priv(ds);
+	struct ethtool_eee *p = &priv->port_sts[port].eee;
+
+	p->eee_enabled = e->eee_enabled;
+
+	if (!p->eee_enabled) {
+		bcm_sf2_eee_enable_set(ds, port, false);
+	} else {
+		p->eee_enabled = bcm_sf2_eee_init(ds, port, phydev);
+		if (!p->eee_enabled)
+			return -EOPNOTSUPP;
+	}
+
+	return 0;
+}
+
+/* Fast-ageing of ARL entries for a given port, equivalent to an ARL
+ * flush for that port.
+ */
+static int bcm_sf2_sw_fast_age_port(struct dsa_switch  *ds, int port)
+{
+	struct bcm_sf2_priv *priv = ds_to_priv(ds);
+	unsigned int timeout = 1000;
+	u32 reg;
+
+	core_writel(priv, port, CORE_FAST_AGE_PORT);
+
+	reg = core_readl(priv, CORE_FAST_AGE_CTRL);
+	reg |= EN_AGE_PORT | FAST_AGE_STR_DONE;
+	core_writel(priv, reg, CORE_FAST_AGE_CTRL);
+
+	do {
+		reg = core_readl(priv, CORE_FAST_AGE_CTRL);
+		if (!(reg & FAST_AGE_STR_DONE))
+			break;
+
+		cpu_relax();
+	} while (timeout--);
+
+	if (!timeout)
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
+static int bcm_sf2_sw_br_join(struct dsa_switch *ds, int port,
+			      u32 br_port_mask)
+{
+	struct bcm_sf2_priv *priv = ds_to_priv(ds);
+	unsigned int i;
+	u32 reg, p_ctl;
+
+	p_ctl = core_readl(priv, CORE_PORT_VLAN_CTL_PORT(port));
+
+	for (i = 0; i < priv->hw_params.num_ports; i++) {
+		if (!((1 << i) & br_port_mask))
+			continue;
+
+		/* Add this local port to the remote port VLAN control
+		 * membership and update the remote port bitmask
+		 */
+		reg = core_readl(priv, CORE_PORT_VLAN_CTL_PORT(i));
+		reg |= 1 << port;
+		core_writel(priv, reg, CORE_PORT_VLAN_CTL_PORT(i));
+		priv->port_sts[i].vlan_ctl_mask = reg;
+
+		p_ctl |= 1 << i;
+	}
+
+	/* Configure the local port VLAN control membership to include
+	 * remote ports and update the local port bitmask
+	 */
+	core_writel(priv, p_ctl, CORE_PORT_VLAN_CTL_PORT(port));
+	priv->port_sts[port].vlan_ctl_mask = p_ctl;
+
+	return 0;
+}
+
+static int bcm_sf2_sw_br_leave(struct dsa_switch *ds, int port,
+			       u32 br_port_mask)
+{
+	struct bcm_sf2_priv *priv = ds_to_priv(ds);
+	unsigned int i;
+	u32 reg, p_ctl;
+
+	p_ctl = core_readl(priv, CORE_PORT_VLAN_CTL_PORT(port));
+
+	for (i = 0; i < priv->hw_params.num_ports; i++) {
+		/* Don't touch the remaining ports */
+		if (!((1 << i) & br_port_mask))
+			continue;
+
+		reg = core_readl(priv, CORE_PORT_VLAN_CTL_PORT(i));
+		reg &= ~(1 << port);
+		core_writel(priv, reg, CORE_PORT_VLAN_CTL_PORT(i));
+		priv->port_sts[port].vlan_ctl_mask = reg;
+
+		/* Prevent self removal to preserve isolation */
+		if (port != i)
+			p_ctl &= ~(1 << i);
+	}
+
+	core_writel(priv, p_ctl, CORE_PORT_VLAN_CTL_PORT(port));
+	priv->port_sts[port].vlan_ctl_mask = p_ctl;
+
+	return 0;
+}
+
+static int bcm_sf2_sw_br_set_stp_state(struct dsa_switch *ds, int port,
+				       u8 state)
+{
+	struct bcm_sf2_priv *priv = ds_to_priv(ds);
+	u8 hw_state, cur_hw_state;
+	int ret = 0;
+	u32 reg;
+
+	reg = core_readl(priv, CORE_G_PCTL_PORT(port));
+	cur_hw_state = reg >> G_MISTP_STATE_SHIFT;
+
+	switch (state) {
+	case BR_STATE_DISABLED:
+		hw_state = G_MISTP_DIS_STATE;
+		break;
+	case BR_STATE_LISTENING:
+		hw_state = G_MISTP_LISTEN_STATE;
+		break;
+	case BR_STATE_LEARNING:
+		hw_state = G_MISTP_LEARN_STATE;
+		break;
+	case BR_STATE_FORWARDING:
+		hw_state = G_MISTP_FWD_STATE;
+		break;
+	case BR_STATE_BLOCKING:
+		hw_state = G_MISTP_BLOCK_STATE;
+		break;
+	default:
+		pr_err("%s: invalid STP state: %d\n", __func__, state);
+		return -EINVAL;
+	}
+
+	/* Fast-age ARL entries if we are moving a port from Learning or
+	 * Forwarding state to Disabled, Blocking or Listening state
+	 */
+	if (cur_hw_state != hw_state) {
+		if (cur_hw_state & 4 && !(hw_state & 4)) {
+			ret = bcm_sf2_sw_fast_age_port(ds, port);
+			if (ret) {
+				pr_err("%s: fast-ageing failed\n", __func__);
+				return ret;
+			}
+		}
+	}
+
+	reg = core_readl(priv, CORE_G_PCTL_PORT(port));
+	reg &= ~(G_MISTP_STATE_MASK << G_MISTP_STATE_SHIFT);
+	reg |= hw_state;
+	core_writel(priv, reg, CORE_G_PCTL_PORT(port));
+
+	return 0;
+}
+
+static irqreturn_t bcm_sf2_switch_0_isr(int irq, void *dev_id)
+{
+	struct bcm_sf2_priv *priv = dev_id;
+
+	priv->irq0_stat = intrl2_0_readl(priv, INTRL2_CPU_STATUS) &
+				~priv->irq0_mask;
+	intrl2_0_writel(priv, priv->irq0_stat, INTRL2_CPU_CLEAR);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t bcm_sf2_switch_1_isr(int irq, void *dev_id)
+{
+	struct bcm_sf2_priv *priv = dev_id;
+
+	priv->irq1_stat = intrl2_1_readl(priv, INTRL2_CPU_STATUS) &
+				~priv->irq1_mask;
+	intrl2_1_writel(priv, priv->irq1_stat, INTRL2_CPU_CLEAR);
+
+	if (priv->irq1_stat & P_LINK_UP_IRQ(P7_IRQ_OFF))
+		priv->port_sts[7].link = 1;
+	if (priv->irq1_stat & P_LINK_DOWN_IRQ(P7_IRQ_OFF))
+		priv->port_sts[7].link = 0;
+
+	return IRQ_HANDLED;
+}
+
+static int bcm_sf2_sw_rst(struct bcm_sf2_priv *priv)
+{
+	unsigned int timeout = 1000;
+	u32 reg;
+
+	reg = core_readl(priv, CORE_WATCHDOG_CTRL);
+	reg |= SOFTWARE_RESET | EN_CHIP_RST | EN_SW_RESET;
+	core_writel(priv, reg, CORE_WATCHDOG_CTRL);
+
+	do {
+		reg = core_readl(priv, CORE_WATCHDOG_CTRL);
+		if (!(reg & SOFTWARE_RESET))
+			break;
+
+		usleep_range(1000, 2000);
+	} while (timeout-- > 0);
+
+	if (timeout == 0)
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
+static void bcm_sf2_intr_disable(struct bcm_sf2_priv *priv)
+{
+	intrl2_0_writel(priv, 0xffffffff, INTRL2_CPU_MASK_SET);
+	intrl2_0_writel(priv, 0xffffffff, INTRL2_CPU_CLEAR);
+	intrl2_0_writel(priv, 0, INTRL2_CPU_MASK_CLEAR);
+	intrl2_1_writel(priv, 0xffffffff, INTRL2_CPU_MASK_SET);
+	intrl2_1_writel(priv, 0xffffffff, INTRL2_CPU_CLEAR);
+	intrl2_1_writel(priv, 0, INTRL2_CPU_MASK_CLEAR);
+}
+
+static int bcm_sf2_sw_setup(struct dsa_switch *ds)
+{
+	const char *reg_names[BCM_SF2_REGS_NUM] = BCM_SF2_REGS_NAME;
+	struct bcm_sf2_priv *priv = ds_to_priv(ds);
+	struct device_node *dn;
+	void __iomem **base;
+	unsigned int port;
+	unsigned int i;
+	u32 reg, rev;
+	int ret;
+
+	spin_lock_init(&priv->indir_lock);
+	mutex_init(&priv->stats_mutex);
+
+	/* All the interesting properties are at the parent device_node
+	 * level
+	 */
+	dn = ds->pd->of_node->parent;
+
+	priv->irq0 = irq_of_parse_and_map(dn, 0);
+	priv->irq1 = irq_of_parse_and_map(dn, 1);
+
+	base = &priv->core;
+	for (i = 0; i < BCM_SF2_REGS_NUM; i++) {
+		*base = of_iomap(dn, i);
+		if (*base == NULL) {
+			pr_err("unable to find register: %s\n", reg_names[i]);
+			ret = -ENOMEM;
+			goto out_unmap;
+		}
+		base++;
+	}
+
+	ret = bcm_sf2_sw_rst(priv);
+	if (ret) {
+		pr_err("unable to software reset switch: %d\n", ret);
+		goto out_unmap;
+	}
+
+	/* Disable all interrupts and request them */
+	bcm_sf2_intr_disable(priv);
+
+	ret = request_irq(priv->irq0, bcm_sf2_switch_0_isr, 0,
+			  "switch_0", priv);
+	if (ret < 0) {
+		pr_err("failed to request switch_0 IRQ\n");
+		goto out_unmap;
+	}
+
+	ret = request_irq(priv->irq1, bcm_sf2_switch_1_isr, 0,
+			  "switch_1", priv);
+	if (ret < 0) {
+		pr_err("failed to request switch_1 IRQ\n");
+		goto out_free_irq0;
+	}
+
+	/* Reset the MIB counters */
+	reg = core_readl(priv, CORE_GMNCFGCFG);
+	reg |= RST_MIB_CNT;
+	core_writel(priv, reg, CORE_GMNCFGCFG);
+	reg &= ~RST_MIB_CNT;
+	core_writel(priv, reg, CORE_GMNCFGCFG);
+
+	/* Get the maximum number of ports for this switch */
+	priv->hw_params.num_ports = core_readl(priv, CORE_IMP0_PRT_ID) + 1;
+	if (priv->hw_params.num_ports > DSA_MAX_PORTS)
+		priv->hw_params.num_ports = DSA_MAX_PORTS;
+
+	/* Assume a single GPHY setup if we can't read that property */
+	if (of_property_read_u32(dn, "brcm,num-gphy",
+				 &priv->hw_params.num_gphy))
+		priv->hw_params.num_gphy = 1;
+
+	/* Enable all valid ports and disable those unused */
+	for (port = 0; port < priv->hw_params.num_ports; port++) {
+		/* IMP port receives special treatment */
+		if ((1 << port) & ds->phys_port_mask)
+			bcm_sf2_port_setup(ds, port, NULL);
+		else if (dsa_is_cpu_port(ds, port))
+			bcm_sf2_imp_setup(ds, port);
+		else
+			bcm_sf2_port_disable(ds, port, NULL);
+	}
+
+	/* Include the pseudo-PHY address and the broadcast PHY address to
+	 * divert reads towards our workaround
+	 */
+	ds->phys_mii_mask |= ((1 << 30) | (1 << 0));
+
+	rev = reg_readl(priv, REG_SWITCH_REVISION);
+	priv->hw_params.top_rev = (rev >> SWITCH_TOP_REV_SHIFT) &
+					SWITCH_TOP_REV_MASK;
+	priv->hw_params.core_rev = (rev & SF2_REV_MASK);
+
+	rev = reg_readl(priv, REG_PHY_REVISION);
+	priv->hw_params.gphy_rev = rev & PHY_REVISION_MASK;
+
+	pr_info("Starfighter 2 top: %x.%02x, core: %x.%02x base: 0x%p, IRQs: %d, %d\n",
+		priv->hw_params.top_rev >> 8, priv->hw_params.top_rev & 0xff,
+		priv->hw_params.core_rev >> 8, priv->hw_params.core_rev & 0xff,
+		priv->core, priv->irq0, priv->irq1);
+
+	return 0;
+
+out_free_irq0:
+	free_irq(priv->irq0, priv);
+out_unmap:
+	base = &priv->core;
+	for (i = 0; i < BCM_SF2_REGS_NUM; i++) {
+		if (*base)
+			iounmap(*base);
+		base++;
+	}
+	return ret;
+}
+
+static int bcm_sf2_sw_set_addr(struct dsa_switch *ds, u8 *addr)
+{
+	return 0;
+}
+
+static u32 bcm_sf2_sw_get_phy_flags(struct dsa_switch *ds, int port)
+{
+	struct bcm_sf2_priv *priv = ds_to_priv(ds);
+
+	/* The BCM7xxx PHY driver expects to find the integrated PHY revision
+	 * in bits 15:8 and the patch level in bits 7:0 which is exactly what
+	 * the REG_PHY_REVISION register layout is.
+	 */
+
+	return priv->hw_params.gphy_rev;
+}
+
+static int bcm_sf2_sw_indir_rw(struct dsa_switch *ds, int op, int addr,
+			       int regnum, u16 val)
+{
+	struct bcm_sf2_priv *priv = ds_to_priv(ds);
+	int ret = 0;
+	u32 reg;
+
+	reg = reg_readl(priv, REG_SWITCH_CNTRL);
+	reg |= MDIO_MASTER_SEL;
+	reg_writel(priv, reg, REG_SWITCH_CNTRL);
+
+	/* Page << 8 | offset */
+	reg = 0x70;
+	reg <<= 2;
+	core_writel(priv, addr, reg);
+
+	/* Page << 8 | offset */
+	reg = 0x80 << 8 | regnum << 1;
+	reg <<= 2;
+
+	if (op)
+		ret = core_readl(priv, reg);
+	else
+		core_writel(priv, val, reg);
+
+	reg = reg_readl(priv, REG_SWITCH_CNTRL);
+	reg &= ~MDIO_MASTER_SEL;
+	reg_writel(priv, reg, REG_SWITCH_CNTRL);
+
+	return ret & 0xffff;
+}
+
+static int bcm_sf2_sw_phy_read(struct dsa_switch *ds, int addr, int regnum)
+{
+	/* Intercept reads from the MDIO broadcast address or Broadcom
+	 * pseudo-PHY address
+	 */
+	switch (addr) {
+	case 0:
+	case 30:
+		return bcm_sf2_sw_indir_rw(ds, 1, addr, regnum, 0);
+	default:
+		return 0xffff;
+	}
+}
+
+static int bcm_sf2_sw_phy_write(struct dsa_switch *ds, int addr, int regnum,
+				u16 val)
+{
+	/* Intercept writes to the MDIO broadcast address or Broadcom
+	 * pseudo-PHY address
+	 */
+	switch (addr) {
+	case 0:
+	case 30:
+		bcm_sf2_sw_indir_rw(ds, 0, addr, regnum, val);
+		break;
+	}
+
+	return 0;
+}
+
+static void bcm_sf2_sw_adjust_link(struct dsa_switch *ds, int port,
+				   struct phy_device *phydev)
+{
+	struct bcm_sf2_priv *priv = ds_to_priv(ds);
+	u32 id_mode_dis = 0, port_mode;
+	const char *str = NULL;
+	u32 reg;
+
+	switch (phydev->interface) {
+	case PHY_INTERFACE_MODE_RGMII:
+		str = "RGMII (no delay)";
+		id_mode_dis = 1;
+	case PHY_INTERFACE_MODE_RGMII_TXID:
+		if (!str)
+			str = "RGMII (TX delay)";
+		port_mode = EXT_GPHY;
+		break;
+	case PHY_INTERFACE_MODE_MII:
+		str = "MII";
+		port_mode = EXT_EPHY;
+		break;
+	case PHY_INTERFACE_MODE_REVMII:
+		str = "Reverse MII";
+		port_mode = EXT_REVMII;
+		break;
+	default:
+		/* All other PHYs: internal and MoCA */
+		goto force_link;
+	}
+
+	/* If the link is down, just disable the interface to conserve power */
+	if (!phydev->link) {
+		reg = reg_readl(priv, REG_RGMII_CNTRL_P(port));
+		reg &= ~RGMII_MODE_EN;
+		reg_writel(priv, reg, REG_RGMII_CNTRL_P(port));
+		goto force_link;
+	}
+
+	/* Clear id_mode_dis bit, and the existing port mode, but
+	 * make sure we enable the RGMII block for data to pass
+	 */
+	reg = reg_readl(priv, REG_RGMII_CNTRL_P(port));
+	reg &= ~ID_MODE_DIS;
+	reg &= ~(PORT_MODE_MASK << PORT_MODE_SHIFT);
+	reg &= ~(RX_PAUSE_EN | TX_PAUSE_EN);
+
+	reg |= port_mode | RGMII_MODE_EN;
+	if (id_mode_dis)
+		reg |= ID_MODE_DIS;
+
+	if (phydev->pause) {
+		if (phydev->asym_pause)
+			reg |= TX_PAUSE_EN;
+		reg |= RX_PAUSE_EN;
+	}
+
+	reg_writel(priv, reg, REG_RGMII_CNTRL_P(port));
+
+	pr_info("Port %d configured for %s\n", port, str);
+
+force_link:
+	/* Force link settings detected from the PHY */
+	reg = SW_OVERRIDE;
+	switch (phydev->speed) {
+	case SPEED_1000:
+		reg |= SPDSTS_1000 << SPEED_SHIFT;
+		break;
+	case SPEED_100:
+		reg |= SPDSTS_100 << SPEED_SHIFT;
+		break;
+	}
+
+	if (phydev->link)
+		reg |= LINK_STS;
+	if (phydev->duplex == DUPLEX_FULL)
+		reg |= DUPLX_MODE;
+
+	core_writel(priv, reg, CORE_STS_OVERRIDE_GMIIP_PORT(port));
+}
+
+static void bcm_sf2_sw_fixed_link_update(struct dsa_switch *ds, int port,
+					 struct fixed_phy_status *status)
+{
+	struct bcm_sf2_priv *priv = ds_to_priv(ds);
+	u32 duplex, pause, speed;
+	u32 reg;
+
+	duplex = core_readl(priv, CORE_DUPSTS);
+	pause = core_readl(priv, CORE_PAUSESTS);
+	speed = core_readl(priv, CORE_SPDSTS);
+
+	speed >>= (port * SPDSTS_SHIFT);
+	speed &= SPDSTS_MASK;
+
+	status->link = 0;
+
+	/* Port 7 is special as we do not get link status from CORE_LNKSTS,
+	 * which means that we need to force the link at the port override
+	 * level to get the data to flow. We do use what the interrupt handler
+	 * did determine before.
+	 *
+	 * For the other ports, we just force the link status, since this is
+	 * a fixed PHY device.
+	 */
+	if (port == 7) {
+		status->link = priv->port_sts[port].link;
+		status->duplex = 1;
+	} else {
+		status->link = 1;
+		status->duplex = !!(duplex & (1 << port));
+	}
+
+	reg = core_readl(priv, CORE_STS_OVERRIDE_GMIIP_PORT(port));
+	reg |= SW_OVERRIDE;
+	if (status->link)
+		reg |= LINK_STS;
+	else
+		reg &= ~LINK_STS;
+	core_writel(priv, reg, CORE_STS_OVERRIDE_GMIIP_PORT(port));
+
+	switch (speed) {
+	case SPDSTS_10:
+		status->speed = SPEED_10;
+		break;
+	case SPDSTS_100:
+		status->speed = SPEED_100;
+		break;
+	case SPDSTS_1000:
+		status->speed = SPEED_1000;
+		break;
+	}
+
+	if ((pause & (1 << port)) &&
+	    (pause & (1 << (port + PAUSESTS_TX_PAUSE_SHIFT)))) {
+		status->asym_pause = 1;
+		status->pause = 1;
+	}
+
+	if (pause & (1 << port))
+		status->pause = 1;
+}
+
+static int bcm_sf2_sw_suspend(struct dsa_switch *ds)
+{
+	struct bcm_sf2_priv *priv = ds_to_priv(ds);
+	unsigned int port;
+
+	bcm_sf2_intr_disable(priv);
+
+	/* Disable all ports physically present including the IMP
+	 * port, the other ones have already been disabled during
+	 * bcm_sf2_sw_setup
+	 */
+	for (port = 0; port < DSA_MAX_PORTS; port++) {
+		if ((1 << port) & ds->phys_port_mask ||
+		    dsa_is_cpu_port(ds, port))
+			bcm_sf2_port_disable(ds, port, NULL);
+	}
+
+	return 0;
+}
+
+static int bcm_sf2_sw_resume(struct dsa_switch *ds)
+{
+	struct bcm_sf2_priv *priv = ds_to_priv(ds);
+	unsigned int port;
+	int ret;
+
+	ret = bcm_sf2_sw_rst(priv);
+	if (ret) {
+		pr_err("%s: failed to software reset switch\n", __func__);
+		return ret;
+	}
+
+	if (priv->hw_params.num_gphy == 1)
+		bcm_sf2_gphy_enable_set(ds, true);
+
+	for (port = 0; port < DSA_MAX_PORTS; port++) {
+		if ((1 << port) & ds->phys_port_mask)
+			bcm_sf2_port_setup(ds, port, NULL);
+		else if (dsa_is_cpu_port(ds, port))
+			bcm_sf2_imp_setup(ds, port);
+	}
+
+	return 0;
+}
+
+static void bcm_sf2_sw_get_wol(struct dsa_switch *ds, int port,
+			       struct ethtool_wolinfo *wol)
+{
+	struct net_device *p = ds->dst[ds->index].master_netdev;
+	struct bcm_sf2_priv *priv = ds_to_priv(ds);
+	struct ethtool_wolinfo pwol;
+
+	/* Get the parent device WoL settings */
+	p->ethtool_ops->get_wol(p, &pwol);
+
+	/* Advertise the parent device supported settings */
+	wol->supported = pwol.supported;
+	memset(&wol->sopass, 0, sizeof(wol->sopass));
+
+	if (pwol.wolopts & WAKE_MAGICSECURE)
+		memcpy(&wol->sopass, pwol.sopass, sizeof(wol->sopass));
+
+	if (priv->wol_ports_mask & (1 << port))
+		wol->wolopts = pwol.wolopts;
+	else
+		wol->wolopts = 0;
+}
+
+static int bcm_sf2_sw_set_wol(struct dsa_switch *ds, int port,
+			      struct ethtool_wolinfo *wol)
+{
+	struct net_device *p = ds->dst[ds->index].master_netdev;
+	struct bcm_sf2_priv *priv = ds_to_priv(ds);
+	s8 cpu_port = ds->dst[ds->index].cpu_port;
+	struct ethtool_wolinfo pwol;
+
+	p->ethtool_ops->get_wol(p, &pwol);
+	if (wol->wolopts & ~pwol.supported)
+		return -EINVAL;
+
+	if (wol->wolopts)
+		priv->wol_ports_mask |= (1 << port);
+	else
+		priv->wol_ports_mask &= ~(1 << port);
+
+	/* If we have at least one port enabled, make sure the CPU port
+	 * is also enabled. If the CPU port is the last one enabled, we disable
+	 * it since this configuration does not make sense.
+	 */
+	if (priv->wol_ports_mask && priv->wol_ports_mask != (1 << cpu_port))
+		priv->wol_ports_mask |= (1 << cpu_port);
+	else
+		priv->wol_ports_mask &= ~(1 << cpu_port);
+
+	return p->ethtool_ops->set_wol(p, wol);
+}
+
+static struct dsa_switch_driver bcm_sf2_switch_driver = {
+	.tag_protocol		= DSA_TAG_PROTO_BRCM,
+	.priv_size		= sizeof(struct bcm_sf2_priv),
+	.probe			= bcm_sf2_sw_probe,
+	.setup			= bcm_sf2_sw_setup,
+	.set_addr		= bcm_sf2_sw_set_addr,
+	.get_phy_flags		= bcm_sf2_sw_get_phy_flags,
+	.phy_read		= bcm_sf2_sw_phy_read,
+	.phy_write		= bcm_sf2_sw_phy_write,
+	.get_strings		= bcm_sf2_sw_get_strings,
+	.get_ethtool_stats	= bcm_sf2_sw_get_ethtool_stats,
+	.get_sset_count		= bcm_sf2_sw_get_sset_count,
+	.adjust_link		= bcm_sf2_sw_adjust_link,
+	.fixed_link_update	= bcm_sf2_sw_fixed_link_update,
+	.suspend		= bcm_sf2_sw_suspend,
+	.resume			= bcm_sf2_sw_resume,
+	.get_wol		= bcm_sf2_sw_get_wol,
+	.set_wol		= bcm_sf2_sw_set_wol,
+	.port_enable		= bcm_sf2_port_setup,
+	.port_disable		= bcm_sf2_port_disable,
+	.get_eee		= bcm_sf2_sw_get_eee,
+	.set_eee		= bcm_sf2_sw_set_eee,
+	.port_join_bridge	= bcm_sf2_sw_br_join,
+	.port_leave_bridge	= bcm_sf2_sw_br_leave,
+	.port_stp_update	= bcm_sf2_sw_br_set_stp_state,
+};
+
+static int __init bcm_sf2_init(void)
+{
+	register_switch_driver(&bcm_sf2_switch_driver);
+
+	return 0;
+}
+module_init(bcm_sf2_init);
+
+static void __exit bcm_sf2_exit(void)
+{
+	unregister_switch_driver(&bcm_sf2_switch_driver);
+}
+module_exit(bcm_sf2_exit);
+
+MODULE_AUTHOR("Broadcom Corporation");
+MODULE_DESCRIPTION("Driver for Broadcom Starfighter 2 ethernet switch chip");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:brcm-sf2");
diff --git a/kernel/drivers/net/dsa/bcm_sf2.h b/kernel/drivers/net/dsa/bcm_sf2.h
new file mode 100644
index 000000000..22e2ebf31
--- /dev/null
+++ b/kernel/drivers/net/dsa/bcm_sf2.h
@@ -0,0 +1,149 @@
+/*
+ * Broadcom Starfighter2 private context
+ *
+ * Copyright (C) 2014, Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __BCM_SF2_H
+#define __BCM_SF2_H
+
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/spinlock.h>
+#include <linux/mutex.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+
+#include <net/dsa.h>
+
+#include "bcm_sf2_regs.h"
+
+struct bcm_sf2_hw_params {
+	u16	top_rev;
+	u16	core_rev;
+	u16	gphy_rev;
+	u32	num_gphy;
+	u8	num_acb_queue;
+	u8	num_rgmii;
+	u8	num_ports;
+	u8	fcb_pause_override:1;
+	u8	acb_packets_inflight:1;
+};
+
+#define BCM_SF2_REGS_NAME {\
+	"core", "reg", "intrl2_0", "intrl2_1", "fcb", "acb" \
+}
+
+#define BCM_SF2_REGS_NUM	6
+
+struct bcm_sf2_port_status {
+	unsigned int link;
+
+	struct ethtool_eee eee;
+
+	u32 vlan_ctl_mask;
+};
+
+struct bcm_sf2_priv {
+	/* Base registers, keep those in order with BCM_SF2_REGS_NAME */
+	void __iomem			*core;
+	void __iomem			*reg;
+	void __iomem			*intrl2_0;
+	void __iomem			*intrl2_1;
+	void __iomem			*fcb;
+	void __iomem			*acb;
+
+	/* spinlock protecting access to the indirect registers */
+	spinlock_t			indir_lock;
+
+	int				irq0;
+	int				irq1;
+	u32				irq0_stat;
+	u32				irq0_mask;
+	u32				irq1_stat;
+	u32				irq1_mask;
+
+	/* Mutex protecting access to the MIB counters */
+	struct mutex			stats_mutex;
+
+	struct bcm_sf2_hw_params	hw_params;
+
+	struct bcm_sf2_port_status	port_sts[DSA_MAX_PORTS];
+
+	/* Mask of ports enabled for Wake-on-LAN */
+	u32				wol_ports_mask;
+};
+
+struct bcm_sf2_hw_stats {
+	const char	*string;
+	u16		reg;
+	u8		sizeof_stat;
+};
+
+#define SF2_IO_MACRO(name) \
+static inline u32 name##_readl(struct bcm_sf2_priv *priv, u32 off)	\
+{									\
+	return __raw_readl(priv->name + off);				\
+}									\
+static inline void name##_writel(struct bcm_sf2_priv *priv,		\
+				  u32 val, u32 off)			\
+{									\
+	__raw_writel(val, priv->name + off);				\
+}									\
+
+/* Accesses to 64-bits register requires us to latch the hi/lo pairs
+ * using the REG_DIR_DATA_{READ,WRITE} ancillary registers. The 'indir_lock'
+ * spinlock is automatically grabbed and released to provide relative
+ * atomiticy with latched reads/writes.
+ */
+#define SF2_IO64_MACRO(name) \
+static inline u64 name##_readq(struct bcm_sf2_priv *priv, u32 off)	\
+{									\
+	u32 indir, dir;							\
+	spin_lock(&priv->indir_lock);					\
+	dir = __raw_readl(priv->name + off);				\
+	indir = reg_readl(priv, REG_DIR_DATA_READ);			\
+	spin_unlock(&priv->indir_lock);					\
+	return (u64)indir << 32 | dir;					\
+}									\
+static inline void name##_writeq(struct bcm_sf2_priv *priv, u32 off,	\
+							u64 val)	\
+{									\
+	spin_lock(&priv->indir_lock);					\
+	reg_writel(priv, upper_32_bits(val), REG_DIR_DATA_WRITE);	\
+	__raw_writel(lower_32_bits(val), priv->name + off);		\
+	spin_unlock(&priv->indir_lock);					\
+}
+
+#define SWITCH_INTR_L2(which)						\
+static inline void intrl2_##which##_mask_clear(struct bcm_sf2_priv *priv, \
+						u32 mask)		\
+{									\
+	intrl2_##which##_writel(priv, mask, INTRL2_CPU_MASK_CLEAR);	\
+	priv->irq##which##_mask &= ~(mask);				\
+}									\
+static inline void intrl2_##which##_mask_set(struct bcm_sf2_priv *priv, \
+						u32 mask)		\
+{									\
+	intrl2_## which##_writel(priv, mask, INTRL2_CPU_MASK_SET);	\
+	priv->irq##which##_mask |= (mask);				\
+}									\
+
+SF2_IO_MACRO(core);
+SF2_IO_MACRO(reg);
+SF2_IO64_MACRO(core);
+SF2_IO_MACRO(intrl2_0);
+SF2_IO_MACRO(intrl2_1);
+SF2_IO_MACRO(fcb);
+SF2_IO_MACRO(acb);
+
+SWITCH_INTR_L2(0);
+SWITCH_INTR_L2(1);
+
+#endif /* __BCM_SF2_H */
diff --git a/kernel/drivers/net/dsa/bcm_sf2_regs.h b/kernel/drivers/net/dsa/bcm_sf2_regs.h
new file mode 100644
index 000000000..fa4e6e78c
--- /dev/null
+++ b/kernel/drivers/net/dsa/bcm_sf2_regs.h
@@ -0,0 +1,250 @@
+/*
+ * Broadcom Starfighter 2 switch register defines
+ *
+ * Copyright (C) 2014, Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef __BCM_SF2_REGS_H
+#define __BCM_SF2_REGS_H
+
+/* Register set relative to 'REG' */
+#define REG_SWITCH_CNTRL		0x00
+#define  MDIO_MASTER_SEL		(1 << 0)
+
+#define REG_SWITCH_STATUS		0x04
+#define REG_DIR_DATA_WRITE		0x08
+#define REG_DIR_DATA_READ		0x0C
+
+#define REG_SWITCH_REVISION		0x18
+#define  SF2_REV_MASK			0xffff
+#define  SWITCH_TOP_REV_SHIFT		16
+#define  SWITCH_TOP_REV_MASK		0xffff
+
+#define REG_PHY_REVISION		0x1C
+#define  PHY_REVISION_MASK		0xffff
+
+#define REG_SPHY_CNTRL			0x2C
+#define  IDDQ_BIAS			(1 << 0)
+#define  EXT_PWR_DOWN			(1 << 1)
+#define  FORCE_DLL_EN			(1 << 2)
+#define  IDDQ_GLOBAL_PWR		(1 << 3)
+#define  CK25_DIS			(1 << 4)
+#define  PHY_RESET			(1 << 5)
+#define  PHY_PHYAD_SHIFT		8
+#define  PHY_PHYAD_MASK			0x1F
+
+#define REG_RGMII_0_BASE		0x34
+#define REG_RGMII_CNTRL			0x00
+#define REG_RGMII_IB_STATUS		0x04
+#define REG_RGMII_RX_CLOCK_DELAY_CNTRL	0x08
+#define REG_RGMII_CNTRL_SIZE		0x0C
+#define REG_RGMII_CNTRL_P(x)		(REG_RGMII_0_BASE + \
+					((x) * REG_RGMII_CNTRL_SIZE))
+/* Relative to REG_RGMII_CNTRL */
+#define  RGMII_MODE_EN			(1 << 0)
+#define  ID_MODE_DIS			(1 << 1)
+#define  PORT_MODE_SHIFT		2
+#define  INT_EPHY			(0 << PORT_MODE_SHIFT)
+#define  INT_GPHY			(1 << PORT_MODE_SHIFT)
+#define  EXT_EPHY			(2 << PORT_MODE_SHIFT)
+#define  EXT_GPHY			(3 << PORT_MODE_SHIFT)
+#define  EXT_REVMII			(4 << PORT_MODE_SHIFT)
+#define  PORT_MODE_MASK			0x7
+#define  RVMII_REF_SEL			(1 << 5)
+#define  RX_PAUSE_EN			(1 << 6)
+#define  TX_PAUSE_EN			(1 << 7)
+#define  TX_CLK_STOP_EN			(1 << 8)
+#define  LPI_COUNT_SHIFT		9
+#define  LPI_COUNT_MASK			0x3F
+
+#define REG_LED_CNTRL_BASE		0x90
+#define REG_LED_CNTRL(x)		(REG_LED_CNTRL_BASE + (x) * 4)
+#define  SPDLNK_SRC_SEL			(1 << 24)
+
+/* Register set relative to 'INTRL2_0' and 'INTRL2_1' */
+#define INTRL2_CPU_STATUS		0x00
+#define INTRL2_CPU_SET			0x04
+#define INTRL2_CPU_CLEAR		0x08
+#define INTRL2_CPU_MASK_STATUS		0x0c
+#define INTRL2_CPU_MASK_SET		0x10
+#define INTRL2_CPU_MASK_CLEAR		0x14
+
+/* Shared INTRL2_0 and INTRL2_ interrupt sources macros */
+#define P_LINK_UP_IRQ(x)		(1 << (0 + (x)))
+#define P_LINK_DOWN_IRQ(x)		(1 << (1 + (x)))
+#define P_ENERGY_ON_IRQ(x)		(1 << (2 + (x)))
+#define P_ENERGY_OFF_IRQ(x)		(1 << (3 + (x)))
+#define P_GPHY_IRQ(x)			(1 << (4 + (x)))
+#define P_NUM_IRQ			5
+#define P_IRQ_MASK(x)			(P_LINK_UP_IRQ((x)) | \
+					 P_LINK_DOWN_IRQ((x)) | \
+					 P_ENERGY_ON_IRQ((x)) | \
+					 P_ENERGY_OFF_IRQ((x)) | \
+					 P_GPHY_IRQ((x)))
+
+/* INTRL2_0 interrupt sources */
+#define P0_IRQ_OFF			0
+#define MEM_DOUBLE_IRQ			(1 << 5)
+#define EEE_LPI_IRQ			(1 << 6)
+#define P5_CPU_WAKE_IRQ			(1 << 7)
+#define P8_CPU_WAKE_IRQ			(1 << 8)
+#define P7_CPU_WAKE_IRQ			(1 << 9)
+#define IEEE1588_IRQ			(1 << 10)
+#define MDIO_ERR_IRQ			(1 << 11)
+#define MDIO_DONE_IRQ			(1 << 12)
+#define GISB_ERR_IRQ			(1 << 13)
+#define UBUS_ERR_IRQ			(1 << 14)
+#define FAILOVER_ON_IRQ			(1 << 15)
+#define FAILOVER_OFF_IRQ		(1 << 16)
+#define TCAM_SOFT_ERR_IRQ		(1 << 17)
+
+/* INTRL2_1 interrupt sources */
+#define P7_IRQ_OFF			0
+#define P_IRQ_OFF(x)			((6 - (x)) * P_NUM_IRQ)
+
+/* Register set relative to 'CORE' */
+#define CORE_G_PCTL_PORT0		0x00000
+#define CORE_G_PCTL_PORT(x)		(CORE_G_PCTL_PORT0 + (x * 0x4))
+#define CORE_IMP_CTL			0x00020
+#define  RX_DIS				(1 << 0)
+#define  TX_DIS				(1 << 1)
+#define  RX_BCST_EN			(1 << 2)
+#define  RX_MCST_EN			(1 << 3)
+#define  RX_UCST_EN			(1 << 4)
+#define  G_MISTP_STATE_SHIFT		5
+#define  G_MISTP_NO_STP			(0 << G_MISTP_STATE_SHIFT)
+#define  G_MISTP_DIS_STATE		(1 << G_MISTP_STATE_SHIFT)
+#define  G_MISTP_BLOCK_STATE		(2 << G_MISTP_STATE_SHIFT)
+#define  G_MISTP_LISTEN_STATE		(3 << G_MISTP_STATE_SHIFT)
+#define  G_MISTP_LEARN_STATE		(4 << G_MISTP_STATE_SHIFT)
+#define  G_MISTP_FWD_STATE		(5 << G_MISTP_STATE_SHIFT)
+#define  G_MISTP_STATE_MASK		0x7
+
+#define CORE_SWMODE			0x0002c
+#define  SW_FWDG_MODE			(1 << 0)
+#define  SW_FWDG_EN			(1 << 1)
+#define  RTRY_LMT_DIS			(1 << 2)
+
+#define CORE_STS_OVERRIDE_IMP		0x00038
+#define  GMII_SPEED_UP_2G		(1 << 6)
+#define  MII_SW_OR			(1 << 7)
+
+#define CORE_NEW_CTRL			0x00084
+#define  IP_MC				(1 << 0)
+#define  OUTRANGEERR_DISCARD		(1 << 1)
+#define  INRANGEERR_DISCARD		(1 << 2)
+#define  CABLE_DIAG_LEN			(1 << 3)
+#define  OVERRIDE_AUTO_PD_WAR		(1 << 4)
+#define  EN_AUTO_PD_WAR			(1 << 5)
+#define  UC_FWD_EN			(1 << 6)
+#define  MC_FWD_EN			(1 << 7)
+
+#define CORE_SWITCH_CTRL		0x00088
+#define  MII_DUMB_FWDG_EN		(1 << 6)
+
+#define CORE_SFT_LRN_CTRL		0x000f8
+#define  SW_LEARN_CNTL(x)		(1 << (x))
+
+#define CORE_STS_OVERRIDE_GMIIP_PORT(x)	(0x160 + (x) * 4)
+#define  LINK_STS			(1 << 0)
+#define  DUPLX_MODE			(1 << 1)
+#define  SPEED_SHIFT			2
+#define  SPEED_MASK			0x3
+#define  RXFLOW_CNTL			(1 << 4)
+#define  TXFLOW_CNTL			(1 << 5)
+#define  SW_OVERRIDE			(1 << 6)
+
+#define CORE_WATCHDOG_CTRL		0x001e4
+#define  SOFTWARE_RESET			(1 << 7)
+#define  EN_CHIP_RST			(1 << 6)
+#define  EN_SW_RESET			(1 << 4)
+
+#define CORE_FAST_AGE_CTRL		0x00220
+#define  EN_FAST_AGE_STATIC		(1 << 0)
+#define  EN_AGE_DYNAMIC			(1 << 1)
+#define  EN_AGE_PORT			(1 << 2)
+#define  EN_AGE_VLAN			(1 << 3)
+#define  EN_AGE_SPT			(1 << 4)
+#define  EN_AGE_MCAST			(1 << 5)
+#define  FAST_AGE_STR_DONE		(1 << 7)
+
+#define CORE_FAST_AGE_PORT		0x00224
+#define  AGE_PORT_MASK			0xf
+
+#define CORE_FAST_AGE_VID		0x00228
+#define  AGE_VID_MASK			0x3fff
+
+#define CORE_LNKSTS			0x00400
+#define  LNK_STS_MASK			0x1ff
+
+#define CORE_SPDSTS			0x00410
+#define  SPDSTS_10			0
+#define  SPDSTS_100			1
+#define  SPDSTS_1000			2
+#define  SPDSTS_SHIFT			2
+#define  SPDSTS_MASK			0x3
+
+#define CORE_DUPSTS			0x00420
+#define  CORE_DUPSTS_MASK		0x1ff
+
+#define CORE_PAUSESTS			0x00428
+#define  PAUSESTS_TX_PAUSE_SHIFT	9
+
+#define CORE_GMNCFGCFG			0x0800
+#define  RST_MIB_CNT			(1 << 0)
+#define  RXBPDU_EN			(1 << 1)
+
+#define CORE_IMP0_PRT_ID		0x0804
+
+#define CORE_BRCM_HDR_CTRL		0x0080c
+#define  BRCM_HDR_EN_P8			(1 << 0)
+#define  BRCM_HDR_EN_P5			(1 << 1)
+#define  BRCM_HDR_EN_P7			(1 << 2)
+
+#define CORE_BRCM_HDR_CTRL2		0x0828
+
+#define CORE_HL_PRTC_CTRL		0x0940
+#define  ARP_EN				(1 << 0)
+#define  RARP_EN			(1 << 1)
+#define  DHCP_EN			(1 << 2)
+#define  ICMPV4_EN			(1 << 3)
+#define  ICMPV6_EN			(1 << 4)
+#define  ICMPV6_FWD_MODE		(1 << 5)
+#define  IGMP_DIP_EN			(1 << 8)
+#define  IGMP_RPTLVE_EN			(1 << 9)
+#define  IGMP_RTPLVE_FWD_MODE		(1 << 10)
+#define  IGMP_QRY_EN			(1 << 11)
+#define  IGMP_QRY_FWD_MODE		(1 << 12)
+#define  IGMP_UKN_EN			(1 << 13)
+#define  IGMP_UKN_FWD_MODE		(1 << 14)
+#define  MLD_RPTDONE_EN			(1 << 15)
+#define  MLD_RPTDONE_FWD_MODE		(1 << 16)
+#define  MLD_QRY_EN			(1 << 17)
+#define  MLD_QRY_FWD_MODE		(1 << 18)
+
+#define CORE_RST_MIB_CNT_EN		0x0950
+
+#define CORE_BRCM_HDR_RX_DIS		0x0980
+#define CORE_BRCM_HDR_TX_DIS		0x0988
+
+#define CORE_MEM_PSM_VDD_CTRL		0x2380
+#define  P_TXQ_PSM_VDD_SHIFT		2
+#define  P_TXQ_PSM_VDD_MASK		0x3
+#define  P_TXQ_PSM_VDD(x)		(P_TXQ_PSM_VDD_MASK << \
+					((x) * P_TXQ_PSM_VDD_SHIFT))
+
+#define	CORE_P0_MIB_OFFSET		0x8000
+#define P_MIB_SIZE			0x400
+#define CORE_P_MIB_OFFSET(x)		(CORE_P0_MIB_OFFSET + (x) * P_MIB_SIZE)
+
+#define CORE_PORT_VLAN_CTL_PORT(x)	(0xc400 + ((x) * 0x8))
+#define  PORT_VLAN_CTRL_MASK		0x1ff
+
+#define CORE_EEE_EN_CTRL		0x24800
+#define CORE_EEE_LPI_INDICATE		0x24810
+
+#endif /* __BCM_SF2_REGS_H */
diff --git a/kernel/drivers/net/dsa/mv88e6060.c b/kernel/drivers/net/dsa/mv88e6060.c
new file mode 100644
index 000000000..c29aebe1e
--- /dev/null
+++ b/kernel/drivers/net/dsa/mv88e6060.c
@@ -0,0 +1,302 @@
+/*
+ * net/dsa/mv88e6060.c - Driver for Marvell 88e6060 switch chips
+ * Copyright (c) 2008-2009 Marvell Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/phy.h>
+#include <net/dsa.h>
+
+#define REG_PORT(p)		(8 + (p))
+#define REG_GLOBAL		0x0f
+
+static int reg_read(struct dsa_switch *ds, int addr, int reg)
+{
+	struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->master_dev);
+
+	if (bus == NULL)
+		return -EINVAL;
+
+	return mdiobus_read(bus, ds->pd->sw_addr + addr, reg);
+}
+
+#define REG_READ(addr, reg)					\
+	({							\
+		int __ret;					\
+								\
+		__ret = reg_read(ds, addr, reg);		\
+		if (__ret < 0)					\
+			return __ret;				\
+		__ret;						\
+	})
+
+
+static int reg_write(struct dsa_switch *ds, int addr, int reg, u16 val)
+{
+	struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->master_dev);
+
+	if (bus == NULL)
+		return -EINVAL;
+
+	return mdiobus_write(bus, ds->pd->sw_addr + addr, reg, val);
+}
+
+#define REG_WRITE(addr, reg, val)				\
+	({							\
+		int __ret;					\
+								\
+		__ret = reg_write(ds, addr, reg, val);		\
+		if (__ret < 0)					\
+			return __ret;				\
+	})
+
+static char *mv88e6060_probe(struct device *host_dev, int sw_addr)
+{
+	struct mii_bus *bus = dsa_host_dev_to_mii_bus(host_dev);
+	int ret;
+
+	if (bus == NULL)
+		return NULL;
+
+	ret = mdiobus_read(bus, sw_addr + REG_PORT(0), 0x03);
+	if (ret >= 0) {
+		if (ret == 0x0600)
+			return "Marvell 88E6060 (A0)";
+		if (ret == 0x0601 || ret == 0x0602)
+			return "Marvell 88E6060 (B0)";
+		if ((ret & 0xfff0) == 0x0600)
+			return "Marvell 88E6060";
+	}
+
+	return NULL;
+}
+
+static int mv88e6060_switch_reset(struct dsa_switch *ds)
+{
+	int i;
+	int ret;
+	unsigned long timeout;
+
+	/* Set all ports to the disabled state. */
+	for (i = 0; i < 6; i++) {
+		ret = REG_READ(REG_PORT(i), 0x04);
+		REG_WRITE(REG_PORT(i), 0x04, ret & 0xfffc);
+	}
+
+	/* Wait for transmit queues to drain. */
+	usleep_range(2000, 4000);
+
+	/* Reset the switch. */
+	REG_WRITE(REG_GLOBAL, 0x0a, 0xa130);
+
+	/* Wait up to one second for reset to complete. */
+	timeout = jiffies + 1 * HZ;
+	while (time_before(jiffies, timeout)) {
+		ret = REG_READ(REG_GLOBAL, 0x00);
+		if ((ret & 0x8000) == 0x0000)
+			break;
+
+		usleep_range(1000, 2000);
+	}
+	if (time_after(jiffies, timeout))
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
+static int mv88e6060_setup_global(struct dsa_switch *ds)
+{
+	/* Disable discarding of frames with excessive collisions,
+	 * set the maximum frame size to 1536 bytes, and mask all
+	 * interrupt sources.
+	 */
+	REG_WRITE(REG_GLOBAL, 0x04, 0x0800);
+
+	/* Enable automatic address learning, set the address
+	 * database size to 1024 entries, and set the default aging
+	 * time to 5 minutes.
+	 */
+	REG_WRITE(REG_GLOBAL, 0x0a, 0x2130);
+
+	return 0;
+}
+
+static int mv88e6060_setup_port(struct dsa_switch *ds, int p)
+{
+	int addr = REG_PORT(p);
+
+	/* Do not force flow control, disable Ingress and Egress
+	 * Header tagging, disable VLAN tunneling, and set the port
+	 * state to Forwarding.  Additionally, if this is the CPU
+	 * port, enable Ingress and Egress Trailer tagging mode.
+	 */
+	REG_WRITE(addr, 0x04, dsa_is_cpu_port(ds, p) ?  0x4103 : 0x0003);
+
+	/* Port based VLAN map: give each port its own address
+	 * database, allow the CPU port to talk to each of the 'real'
+	 * ports, and allow each of the 'real' ports to only talk to
+	 * the CPU port.
+	 */
+	REG_WRITE(addr, 0x06,
+			((p & 0xf) << 12) |
+			 (dsa_is_cpu_port(ds, p) ?
+				ds->phys_port_mask :
+				(1 << ds->dst->cpu_port)));
+
+	/* Port Association Vector: when learning source addresses
+	 * of packets, add the address to the address database using
+	 * a port bitmap that has only the bit for this port set and
+	 * the other bits clear.
+	 */
+	REG_WRITE(addr, 0x0b, 1 << p);
+
+	return 0;
+}
+
+static int mv88e6060_setup(struct dsa_switch *ds)
+{
+	int i;
+	int ret;
+
+	ret = mv88e6060_switch_reset(ds);
+	if (ret < 0)
+		return ret;
+
+	/* @@@ initialise atu */
+
+	ret = mv88e6060_setup_global(ds);
+	if (ret < 0)
+		return ret;
+
+	for (i = 0; i < 6; i++) {
+		ret = mv88e6060_setup_port(ds, i);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int mv88e6060_set_addr(struct dsa_switch *ds, u8 *addr)
+{
+	REG_WRITE(REG_GLOBAL, 0x01, (addr[0] << 8) | addr[1]);
+	REG_WRITE(REG_GLOBAL, 0x02, (addr[2] << 8) | addr[3]);
+	REG_WRITE(REG_GLOBAL, 0x03, (addr[4] << 8) | addr[5]);
+
+	return 0;
+}
+
+static int mv88e6060_port_to_phy_addr(int port)
+{
+	if (port >= 0 && port <= 5)
+		return port;
+	return -1;
+}
+
+static int mv88e6060_phy_read(struct dsa_switch *ds, int port, int regnum)
+{
+	int addr;
+
+	addr = mv88e6060_port_to_phy_addr(port);
+	if (addr == -1)
+		return 0xffff;
+
+	return reg_read(ds, addr, regnum);
+}
+
+static int
+mv88e6060_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val)
+{
+	int addr;
+
+	addr = mv88e6060_port_to_phy_addr(port);
+	if (addr == -1)
+		return 0xffff;
+
+	return reg_write(ds, addr, regnum, val);
+}
+
+static void mv88e6060_poll_link(struct dsa_switch *ds)
+{
+	int i;
+
+	for (i = 0; i < DSA_MAX_PORTS; i++) {
+		struct net_device *dev;
+		int uninitialized_var(port_status);
+		int link;
+		int speed;
+		int duplex;
+		int fc;
+
+		dev = ds->ports[i];
+		if (dev == NULL)
+			continue;
+
+		link = 0;
+		if (dev->flags & IFF_UP) {
+			port_status = reg_read(ds, REG_PORT(i), 0x00);
+			if (port_status < 0)
+				continue;
+
+			link = !!(port_status & 0x1000);
+		}
+
+		if (!link) {
+			if (netif_carrier_ok(dev)) {
+				netdev_info(dev, "link down\n");
+				netif_carrier_off(dev);
+			}
+			continue;
+		}
+
+		speed = (port_status & 0x0100) ? 100 : 10;
+		duplex = (port_status & 0x0200) ? 1 : 0;
+		fc = ((port_status & 0xc000) == 0xc000) ? 1 : 0;
+
+		if (!netif_carrier_ok(dev)) {
+			netdev_info(dev,
+				    "link up, %d Mb/s, %s duplex, flow control %sabled\n",
+				    speed,
+				    duplex ? "full" : "half",
+				    fc ? "en" : "dis");
+			netif_carrier_on(dev);
+		}
+	}
+}
+
+static struct dsa_switch_driver mv88e6060_switch_driver = {
+	.tag_protocol	= DSA_TAG_PROTO_TRAILER,
+	.probe		= mv88e6060_probe,
+	.setup		= mv88e6060_setup,
+	.set_addr	= mv88e6060_set_addr,
+	.phy_read	= mv88e6060_phy_read,
+	.phy_write	= mv88e6060_phy_write,
+	.poll_link	= mv88e6060_poll_link,
+};
+
+static int __init mv88e6060_init(void)
+{
+	register_switch_driver(&mv88e6060_switch_driver);
+	return 0;
+}
+module_init(mv88e6060_init);
+
+static void __exit mv88e6060_cleanup(void)
+{
+	unregister_switch_driver(&mv88e6060_switch_driver);
+}
+module_exit(mv88e6060_cleanup);
+
+MODULE_AUTHOR("Lennert Buytenhek <buytenh@wantstofly.org>");
+MODULE_DESCRIPTION("Driver for Marvell 88E6060 ethernet switch chip");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:mv88e6060");
diff --git a/kernel/drivers/net/dsa/mv88e6123_61_65.c b/kernel/drivers/net/dsa/mv88e6123_61_65.c
new file mode 100644
index 000000000..b4af6d5af
--- /dev/null
+++ b/kernel/drivers/net/dsa/mv88e6123_61_65.c
@@ -0,0 +1,301 @@
+/*
+ * net/dsa/mv88e6123_61_65.c - Marvell 88e6123/6161/6165 switch chip support
+ * Copyright (c) 2008-2009 Marvell Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/phy.h>
+#include <net/dsa.h>
+#include "mv88e6xxx.h"
+
+static char *mv88e6123_61_65_probe(struct device *host_dev, int sw_addr)
+{
+	struct mii_bus *bus = dsa_host_dev_to_mii_bus(host_dev);
+	int ret;
+
+	if (bus == NULL)
+		return NULL;
+
+	ret = __mv88e6xxx_reg_read(bus, sw_addr, REG_PORT(0), PORT_SWITCH_ID);
+	if (ret >= 0) {
+		if (ret == PORT_SWITCH_ID_6123_A1)
+			return "Marvell 88E6123 (A1)";
+		if (ret == PORT_SWITCH_ID_6123_A2)
+			return "Marvell 88E6123 (A2)";
+		if ((ret & 0xfff0) == PORT_SWITCH_ID_6123)
+			return "Marvell 88E6123";
+
+		if (ret == PORT_SWITCH_ID_6161_A1)
+			return "Marvell 88E6161 (A1)";
+		if (ret == PORT_SWITCH_ID_6161_A2)
+			return "Marvell 88E6161 (A2)";
+		if ((ret & 0xfff0) == PORT_SWITCH_ID_6161)
+			return "Marvell 88E6161";
+
+		if (ret == PORT_SWITCH_ID_6165_A1)
+			return "Marvell 88E6165 (A1)";
+		if (ret == PORT_SWITCH_ID_6165_A2)
+			return "Marvell 88e6165 (A2)";
+		if ((ret & 0xfff0) == PORT_SWITCH_ID_6165)
+			return "Marvell 88E6165";
+	}
+
+	return NULL;
+}
+
+static int mv88e6123_61_65_setup_global(struct dsa_switch *ds)
+{
+	int ret;
+	int i;
+
+	/* Disable the PHY polling unit (since there won't be any
+	 * external PHYs to poll), don't discard packets with
+	 * excessive collisions, and mask all interrupt sources.
+	 */
+	REG_WRITE(REG_GLOBAL, 0x04, 0x0000);
+
+	/* Set the default address aging time to 5 minutes, and
+	 * enable address learn messages to be sent to all message
+	 * ports.
+	 */
+	REG_WRITE(REG_GLOBAL, 0x0a, 0x0148);
+
+	/* Configure the priority mapping registers. */
+	ret = mv88e6xxx_config_prio(ds);
+	if (ret < 0)
+		return ret;
+
+	/* Configure the upstream port, and configure the upstream
+	 * port as the port to which ingress and egress monitor frames
+	 * are to be sent.
+	 */
+	REG_WRITE(REG_GLOBAL, 0x1a, (dsa_upstream_port(ds) * 0x1110));
+
+	/* Disable remote management for now, and set the switch's
+	 * DSA device number.
+	 */
+	REG_WRITE(REG_GLOBAL, 0x1c, ds->index & 0x1f);
+
+	/* Send all frames with destination addresses matching
+	 * 01:80:c2:00:00:2x to the CPU port.
+	 */
+	REG_WRITE(REG_GLOBAL2, 0x02, 0xffff);
+
+	/* Send all frames with destination addresses matching
+	 * 01:80:c2:00:00:0x to the CPU port.
+	 */
+	REG_WRITE(REG_GLOBAL2, 0x03, 0xffff);
+
+	/* Disable the loopback filter, disable flow control
+	 * messages, disable flood broadcast override, disable
+	 * removing of provider tags, disable ATU age violation
+	 * interrupts, disable tag flow control, force flow
+	 * control priority to the highest, and send all special
+	 * multicast frames to the CPU at the highest priority.
+	 */
+	REG_WRITE(REG_GLOBAL2, 0x05, 0x00ff);
+
+	/* Program the DSA routing table. */
+	for (i = 0; i < 32; i++) {
+		int nexthop;
+
+		nexthop = 0x1f;
+		if (i != ds->index && i < ds->dst->pd->nr_chips)
+			nexthop = ds->pd->rtable[i] & 0x1f;
+
+		REG_WRITE(REG_GLOBAL2, 0x06, 0x8000 | (i << 8) | nexthop);
+	}
+
+	/* Clear all trunk masks. */
+	for (i = 0; i < 8; i++)
+		REG_WRITE(REG_GLOBAL2, 0x07, 0x8000 | (i << 12) | 0xff);
+
+	/* Clear all trunk mappings. */
+	for (i = 0; i < 16; i++)
+		REG_WRITE(REG_GLOBAL2, 0x08, 0x8000 | (i << 11));
+
+	/* Disable ingress rate limiting by resetting all ingress
+	 * rate limit registers to their initial state.
+	 */
+	for (i = 0; i < 6; i++)
+		REG_WRITE(REG_GLOBAL2, 0x09, 0x9000 | (i << 8));
+
+	/* Initialise cross-chip port VLAN table to reset defaults. */
+	REG_WRITE(REG_GLOBAL2, 0x0b, 0x9000);
+
+	/* Clear the priority override table. */
+	for (i = 0; i < 16; i++)
+		REG_WRITE(REG_GLOBAL2, 0x0f, 0x8000 | (i << 8));
+
+	/* @@@ initialise AVB (22/23) watchdog (27) sdet (29) registers */
+
+	return 0;
+}
+
+static int mv88e6123_61_65_setup_port(struct dsa_switch *ds, int p)
+{
+	int addr = REG_PORT(p);
+	u16 val;
+
+	/* MAC Forcing register: don't force link, speed, duplex
+	 * or flow control state to any particular values on physical
+	 * ports, but force the CPU port and all DSA ports to 1000 Mb/s
+	 * full duplex.
+	 */
+	if (dsa_is_cpu_port(ds, p) || ds->dsa_port_mask & (1 << p))
+		REG_WRITE(addr, 0x01, 0x003e);
+	else
+		REG_WRITE(addr, 0x01, 0x0003);
+
+	/* Do not limit the period of time that this port can be
+	 * paused for by the remote end or the period of time that
+	 * this port can pause the remote end.
+	 */
+	REG_WRITE(addr, 0x02, 0x0000);
+
+	/* Port Control: disable Drop-on-Unlock, disable Drop-on-Lock,
+	 * disable Header mode, enable IGMP/MLD snooping, disable VLAN
+	 * tunneling, determine priority by looking at 802.1p and IP
+	 * priority fields (IP prio has precedence), and set STP state
+	 * to Forwarding.
+	 *
+	 * If this is the CPU link, use DSA or EDSA tagging depending
+	 * on which tagging mode was configured.
+	 *
+	 * If this is a link to another switch, use DSA tagging mode.
+	 *
+	 * If this is the upstream port for this switch, enable
+	 * forwarding of unknown unicasts and multicasts.
+	 */
+	val = 0x0433;
+	if (dsa_is_cpu_port(ds, p)) {
+		if (ds->dst->tag_protocol == DSA_TAG_PROTO_EDSA)
+			val |= 0x3300;
+		else
+			val |= 0x0100;
+	}
+	if (ds->dsa_port_mask & (1 << p))
+		val |= 0x0100;
+	if (p == dsa_upstream_port(ds))
+		val |= 0x000c;
+	REG_WRITE(addr, 0x04, val);
+
+	/* Port Control 2: don't force a good FCS, set the maximum
+	 * frame size to 10240 bytes, don't let the switch add or
+	 * strip 802.1q tags, don't discard tagged or untagged frames
+	 * on this port, do a destination address lookup on all
+	 * received packets as usual, disable ARP mirroring and don't
+	 * send a copy of all transmitted/received frames on this port
+	 * to the CPU.
+	 */
+	REG_WRITE(addr, 0x08, 0x2080);
+
+	/* Egress rate control: disable egress rate control. */
+	REG_WRITE(addr, 0x09, 0x0001);
+
+	/* Egress rate control 2: disable egress rate control. */
+	REG_WRITE(addr, 0x0a, 0x0000);
+
+	/* Port Association Vector: when learning source addresses
+	 * of packets, add the address to the address database using
+	 * a port bitmap that has only the bit for this port set and
+	 * the other bits clear.
+	 */
+	REG_WRITE(addr, 0x0b, 1 << p);
+
+	/* Port ATU control: disable limiting the number of address
+	 * database entries that this port is allowed to use.
+	 */
+	REG_WRITE(addr, 0x0c, 0x0000);
+
+	/* Priority Override: disable DA, SA and VTU priority override. */
+	REG_WRITE(addr, 0x0d, 0x0000);
+
+	/* Port Ethertype: use the Ethertype DSA Ethertype value. */
+	REG_WRITE(addr, 0x0f, ETH_P_EDSA);
+
+	/* Tag Remap: use an identity 802.1p prio -> switch prio
+	 * mapping.
+	 */
+	REG_WRITE(addr, 0x18, 0x3210);
+
+	/* Tag Remap 2: use an identity 802.1p prio -> switch prio
+	 * mapping.
+	 */
+	REG_WRITE(addr, 0x19, 0x7654);
+
+	return mv88e6xxx_setup_port_common(ds, p);
+}
+
+static int mv88e6123_61_65_setup(struct dsa_switch *ds)
+{
+	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+	int i;
+	int ret;
+
+	ret = mv88e6xxx_setup_common(ds);
+	if (ret < 0)
+		return ret;
+
+	switch (ps->id) {
+	case PORT_SWITCH_ID_6123:
+		ps->num_ports = 3;
+		break;
+	case PORT_SWITCH_ID_6161:
+	case PORT_SWITCH_ID_6165:
+		ps->num_ports = 6;
+		break;
+	default:
+		return -ENODEV;
+	}
+
+	ret = mv88e6xxx_switch_reset(ds, false);
+	if (ret < 0)
+		return ret;
+
+	/* @@@ initialise vtu and atu */
+
+	ret = mv88e6123_61_65_setup_global(ds);
+	if (ret < 0)
+		return ret;
+
+	for (i = 0; i < ps->num_ports; i++) {
+		ret = mv88e6123_61_65_setup_port(ds, i);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+struct dsa_switch_driver mv88e6123_61_65_switch_driver = {
+	.tag_protocol		= DSA_TAG_PROTO_EDSA,
+	.priv_size		= sizeof(struct mv88e6xxx_priv_state),
+	.probe			= mv88e6123_61_65_probe,
+	.setup			= mv88e6123_61_65_setup,
+	.set_addr		= mv88e6xxx_set_addr_indirect,
+	.phy_read		= mv88e6xxx_phy_read,
+	.phy_write		= mv88e6xxx_phy_write,
+	.poll_link		= mv88e6xxx_poll_link,
+	.get_strings		= mv88e6xxx_get_strings,
+	.get_ethtool_stats	= mv88e6xxx_get_ethtool_stats,
+	.get_sset_count		= mv88e6xxx_get_sset_count,
+#ifdef CONFIG_NET_DSA_HWMON
+	.get_temp		= mv88e6xxx_get_temp,
+#endif
+	.get_regs_len		= mv88e6xxx_get_regs_len,
+	.get_regs		= mv88e6xxx_get_regs,
+};
+
+MODULE_ALIAS("platform:mv88e6123");
+MODULE_ALIAS("platform:mv88e6161");
+MODULE_ALIAS("platform:mv88e6165");
diff --git a/kernel/drivers/net/dsa/mv88e6131.c b/kernel/drivers/net/dsa/mv88e6131.c
new file mode 100644
index 000000000..e54824fa0
--- /dev/null
+++ b/kernel/drivers/net/dsa/mv88e6131.c
@@ -0,0 +1,319 @@
+/*
+ * net/dsa/mv88e6131.c - Marvell 88e6095/6095f/6131 switch chip support
+ * Copyright (c) 2008-2009 Marvell Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/phy.h>
+#include <net/dsa.h>
+#include "mv88e6xxx.h"
+
+static char *mv88e6131_probe(struct device *host_dev, int sw_addr)
+{
+	struct mii_bus *bus = dsa_host_dev_to_mii_bus(host_dev);
+	int ret;
+
+	if (bus == NULL)
+		return NULL;
+
+	ret = __mv88e6xxx_reg_read(bus, sw_addr, REG_PORT(0), PORT_SWITCH_ID);
+	if (ret >= 0) {
+		int ret_masked = ret & 0xfff0;
+
+		if (ret_masked == PORT_SWITCH_ID_6085)
+			return "Marvell 88E6085";
+		if (ret_masked == PORT_SWITCH_ID_6095)
+			return "Marvell 88E6095/88E6095F";
+		if (ret == PORT_SWITCH_ID_6131_B2)
+			return "Marvell 88E6131 (B2)";
+		if (ret_masked == PORT_SWITCH_ID_6131)
+			return "Marvell 88E6131";
+	}
+
+	return NULL;
+}
+
+static int mv88e6131_setup_global(struct dsa_switch *ds)
+{
+	int ret;
+	int i;
+
+	/* Enable the PHY polling unit, don't discard packets with
+	 * excessive collisions, use a weighted fair queueing scheme
+	 * to arbitrate between packet queues, set the maximum frame
+	 * size to 1632, and mask all interrupt sources.
+	 */
+	REG_WRITE(REG_GLOBAL, 0x04, 0x4400);
+
+	/* Set the default address aging time to 5 minutes, and
+	 * enable address learn messages to be sent to all message
+	 * ports.
+	 */
+	REG_WRITE(REG_GLOBAL, 0x0a, 0x0148);
+
+	/* Configure the priority mapping registers. */
+	ret = mv88e6xxx_config_prio(ds);
+	if (ret < 0)
+		return ret;
+
+	/* Set the VLAN ethertype to 0x8100. */
+	REG_WRITE(REG_GLOBAL, 0x19, 0x8100);
+
+	/* Disable ARP mirroring, and configure the upstream port as
+	 * the port to which ingress and egress monitor frames are to
+	 * be sent.
+	 */
+	REG_WRITE(REG_GLOBAL, 0x1a, (dsa_upstream_port(ds) * 0x1100) | 0x00f0);
+
+	/* Disable cascade port functionality unless this device
+	 * is used in a cascade configuration, and set the switch's
+	 * DSA device number.
+	 */
+	if (ds->dst->pd->nr_chips > 1)
+		REG_WRITE(REG_GLOBAL, 0x1c, 0xf000 | (ds->index & 0x1f));
+	else
+		REG_WRITE(REG_GLOBAL, 0x1c, 0xe000 | (ds->index & 0x1f));
+
+	/* Send all frames with destination addresses matching
+	 * 01:80:c2:00:00:0x to the CPU port.
+	 */
+	REG_WRITE(REG_GLOBAL2, 0x03, 0xffff);
+
+	/* Ignore removed tag data on doubly tagged packets, disable
+	 * flow control messages, force flow control priority to the
+	 * highest, and send all special multicast frames to the CPU
+	 * port at the highest priority.
+	 */
+	REG_WRITE(REG_GLOBAL2, 0x05, 0x00ff);
+
+	/* Program the DSA routing table. */
+	for (i = 0; i < 32; i++) {
+		int nexthop;
+
+		nexthop = 0x1f;
+		if (ds->pd->rtable &&
+		    i != ds->index && i < ds->dst->pd->nr_chips)
+			nexthop = ds->pd->rtable[i] & 0x1f;
+
+		REG_WRITE(REG_GLOBAL2, 0x06, 0x8000 | (i << 8) | nexthop);
+	}
+
+	/* Clear all trunk masks. */
+	for (i = 0; i < 8; i++)
+		REG_WRITE(REG_GLOBAL2, 0x07, 0x8000 | (i << 12) | 0x7ff);
+
+	/* Clear all trunk mappings. */
+	for (i = 0; i < 16; i++)
+		REG_WRITE(REG_GLOBAL2, 0x08, 0x8000 | (i << 11));
+
+	/* Force the priority of IGMP/MLD snoop frames and ARP frames
+	 * to the highest setting.
+	 */
+	REG_WRITE(REG_GLOBAL2, 0x0f, 0x00ff);
+
+	return 0;
+}
+
+static int mv88e6131_setup_port(struct dsa_switch *ds, int p)
+{
+	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+	int addr = REG_PORT(p);
+	u16 val;
+
+	/* MAC Forcing register: don't force link, speed, duplex
+	 * or flow control state to any particular values on physical
+	 * ports, but force the CPU port and all DSA ports to 1000 Mb/s
+	 * (100 Mb/s on 6085) full duplex.
+	 */
+	if (dsa_is_cpu_port(ds, p) || ds->dsa_port_mask & (1 << p))
+		if (ps->id == PORT_SWITCH_ID_6085)
+			REG_WRITE(addr, 0x01, 0x003d); /* 100 Mb/s */
+		else
+			REG_WRITE(addr, 0x01, 0x003e); /* 1000 Mb/s */
+	else
+		REG_WRITE(addr, 0x01, 0x0003);
+
+	/* Port Control: disable Core Tag, disable Drop-on-Lock,
+	 * transmit frames unmodified, disable Header mode,
+	 * enable IGMP/MLD snoop, disable DoubleTag, disable VLAN
+	 * tunneling, determine priority by looking at 802.1p and
+	 * IP priority fields (IP prio has precedence), and set STP
+	 * state to Forwarding.
+	 *
+	 * If this is the upstream port for this switch, enable
+	 * forwarding of unknown unicasts, and enable DSA tagging
+	 * mode.
+	 *
+	 * If this is the link to another switch, use DSA tagging
+	 * mode, but do not enable forwarding of unknown unicasts.
+	 */
+	val = 0x0433;
+	if (p == dsa_upstream_port(ds)) {
+		val |= 0x0104;
+		/* On 6085, unknown multicast forward is controlled
+		 * here rather than in Port Control 2 register.
+		 */
+		if (ps->id == PORT_SWITCH_ID_6085)
+			val |= 0x0008;
+	}
+	if (ds->dsa_port_mask & (1 << p))
+		val |= 0x0100;
+	REG_WRITE(addr, 0x04, val);
+
+	/* Port Control 2: don't force a good FCS, don't use
+	 * VLAN-based, source address-based or destination
+	 * address-based priority overrides, don't let the switch
+	 * add or strip 802.1q tags, don't discard tagged or
+	 * untagged frames on this port, do a destination address
+	 * lookup on received packets as usual, don't send a copy
+	 * of all transmitted/received frames on this port to the
+	 * CPU, and configure the upstream port number.
+	 *
+	 * If this is the upstream port for this switch, enable
+	 * forwarding of unknown multicast addresses.
+	 */
+	if (ps->id == PORT_SWITCH_ID_6085)
+		/* on 6085, bits 3:0 are reserved, bit 6 control ARP
+		 * mirroring, and multicast forward is handled in
+		 * Port Control register.
+		 */
+		REG_WRITE(addr, 0x08, 0x0080);
+	else {
+		val = 0x0080 | dsa_upstream_port(ds);
+		if (p == dsa_upstream_port(ds))
+			val |= 0x0040;
+		REG_WRITE(addr, 0x08, val);
+	}
+
+	/* Rate Control: disable ingress rate limiting. */
+	REG_WRITE(addr, 0x09, 0x0000);
+
+	/* Rate Control 2: disable egress rate limiting. */
+	REG_WRITE(addr, 0x0a, 0x0000);
+
+	/* Port Association Vector: when learning source addresses
+	 * of packets, add the address to the address database using
+	 * a port bitmap that has only the bit for this port set and
+	 * the other bits clear.
+	 */
+	REG_WRITE(addr, 0x0b, 1 << p);
+
+	/* Tag Remap: use an identity 802.1p prio -> switch prio
+	 * mapping.
+	 */
+	REG_WRITE(addr, 0x18, 0x3210);
+
+	/* Tag Remap 2: use an identity 802.1p prio -> switch prio
+	 * mapping.
+	 */
+	REG_WRITE(addr, 0x19, 0x7654);
+
+	return mv88e6xxx_setup_port_common(ds, p);
+}
+
+static int mv88e6131_setup(struct dsa_switch *ds)
+{
+	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+	int i;
+	int ret;
+
+	ret = mv88e6xxx_setup_common(ds);
+	if (ret < 0)
+		return ret;
+
+	mv88e6xxx_ppu_state_init(ds);
+
+	switch (ps->id) {
+	case PORT_SWITCH_ID_6085:
+		ps->num_ports = 10;
+		break;
+	case PORT_SWITCH_ID_6095:
+		ps->num_ports = 11;
+		break;
+	case PORT_SWITCH_ID_6131:
+	case PORT_SWITCH_ID_6131_B2:
+		ps->num_ports = 8;
+		break;
+	default:
+		return -ENODEV;
+	}
+
+	ret = mv88e6xxx_switch_reset(ds, false);
+	if (ret < 0)
+		return ret;
+
+	/* @@@ initialise vtu and atu */
+
+	ret = mv88e6131_setup_global(ds);
+	if (ret < 0)
+		return ret;
+
+	for (i = 0; i < ps->num_ports; i++) {
+		ret = mv88e6131_setup_port(ds, i);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int mv88e6131_port_to_phy_addr(struct dsa_switch *ds, int port)
+{
+	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+
+	if (port >= 0 && port < ps->num_ports)
+		return port;
+
+	return -EINVAL;
+}
+
+static int
+mv88e6131_phy_read(struct dsa_switch *ds, int port, int regnum)
+{
+	int addr = mv88e6131_port_to_phy_addr(ds, port);
+
+	if (addr < 0)
+		return addr;
+
+	return mv88e6xxx_phy_read_ppu(ds, addr, regnum);
+}
+
+static int
+mv88e6131_phy_write(struct dsa_switch *ds,
+			      int port, int regnum, u16 val)
+{
+	int addr = mv88e6131_port_to_phy_addr(ds, port);
+
+	if (addr < 0)
+		return addr;
+
+	return mv88e6xxx_phy_write_ppu(ds, addr, regnum, val);
+}
+
+struct dsa_switch_driver mv88e6131_switch_driver = {
+	.tag_protocol		= DSA_TAG_PROTO_DSA,
+	.priv_size		= sizeof(struct mv88e6xxx_priv_state),
+	.probe			= mv88e6131_probe,
+	.setup			= mv88e6131_setup,
+	.set_addr		= mv88e6xxx_set_addr_direct,
+	.phy_read		= mv88e6131_phy_read,
+	.phy_write		= mv88e6131_phy_write,
+	.poll_link		= mv88e6xxx_poll_link,
+	.get_strings		= mv88e6xxx_get_strings,
+	.get_ethtool_stats	= mv88e6xxx_get_ethtool_stats,
+	.get_sset_count		= mv88e6xxx_get_sset_count,
+};
+
+MODULE_ALIAS("platform:mv88e6085");
+MODULE_ALIAS("platform:mv88e6095");
+MODULE_ALIAS("platform:mv88e6095f");
+MODULE_ALIAS("platform:mv88e6131");
diff --git a/kernel/drivers/net/dsa/mv88e6171.c b/kernel/drivers/net/dsa/mv88e6171.c
new file mode 100644
index 000000000..9104efea0
--- /dev/null
+++ b/kernel/drivers/net/dsa/mv88e6171.c
@@ -0,0 +1,311 @@
+/* net/dsa/mv88e6171.c - Marvell 88e6171/8826172 switch chip support
+ * Copyright (c) 2008-2009 Marvell Semiconductor
+ * Copyright (c) 2014 Claudio Leite <leitec@staticky.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/phy.h>
+#include <net/dsa.h>
+#include "mv88e6xxx.h"
+
+static char *mv88e6171_probe(struct device *host_dev, int sw_addr)
+{
+	struct mii_bus *bus = dsa_host_dev_to_mii_bus(host_dev);
+	int ret;
+
+	if (bus == NULL)
+		return NULL;
+
+	ret = __mv88e6xxx_reg_read(bus, sw_addr, REG_PORT(0), PORT_SWITCH_ID);
+	if (ret >= 0) {
+		if ((ret & 0xfff0) == PORT_SWITCH_ID_6171)
+			return "Marvell 88E6171";
+		if ((ret & 0xfff0) == PORT_SWITCH_ID_6172)
+			return "Marvell 88E6172";
+	}
+
+	return NULL;
+}
+
+static int mv88e6171_setup_global(struct dsa_switch *ds)
+{
+	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+	int ret;
+	int i;
+
+	/* Discard packets with excessive collisions, mask all
+	 * interrupt sources, enable PPU.
+	 */
+	REG_WRITE(REG_GLOBAL, 0x04, 0x6000);
+
+	/* Set the default address aging time to 5 minutes, and
+	 * enable address learn messages to be sent to all message
+	 * ports.
+	 */
+	REG_WRITE(REG_GLOBAL, 0x0a, 0x0148);
+
+	/* Configure the priority mapping registers. */
+	ret = mv88e6xxx_config_prio(ds);
+	if (ret < 0)
+		return ret;
+
+	/* Configure the upstream port, and configure the upstream
+	 * port as the port to which ingress and egress monitor frames
+	 * are to be sent.
+	 */
+	if (REG_READ(REG_PORT(0), 0x03) == 0x1710)
+		REG_WRITE(REG_GLOBAL, 0x1a, (dsa_upstream_port(ds) * 0x1111));
+	else
+		REG_WRITE(REG_GLOBAL, 0x1a, (dsa_upstream_port(ds) * 0x1110));
+
+	/* Disable remote management for now, and set the switch's
+	 * DSA device number.
+	 */
+	REG_WRITE(REG_GLOBAL, 0x1c, ds->index & 0x1f);
+
+	/* Send all frames with destination addresses matching
+	 * 01:80:c2:00:00:2x to the CPU port.
+	 */
+	REG_WRITE(REG_GLOBAL2, 0x02, 0xffff);
+
+	/* Send all frames with destination addresses matching
+	 * 01:80:c2:00:00:0x to the CPU port.
+	 */
+	REG_WRITE(REG_GLOBAL2, 0x03, 0xffff);
+
+	/* Disable the loopback filter, disable flow control
+	 * messages, disable flood broadcast override, disable
+	 * removing of provider tags, disable ATU age violation
+	 * interrupts, disable tag flow control, force flow
+	 * control priority to the highest, and send all special
+	 * multicast frames to the CPU at the highest priority.
+	 */
+	REG_WRITE(REG_GLOBAL2, 0x05, 0x00ff);
+
+	/* Program the DSA routing table. */
+	for (i = 0; i < 32; i++) {
+		int nexthop;
+
+		nexthop = 0x1f;
+		if (i != ds->index && i < ds->dst->pd->nr_chips)
+			nexthop = ds->pd->rtable[i] & 0x1f;
+
+		REG_WRITE(REG_GLOBAL2, 0x06, 0x8000 | (i << 8) | nexthop);
+	}
+
+	/* Clear all trunk masks. */
+	for (i = 0; i < ps->num_ports; i++)
+		REG_WRITE(REG_GLOBAL2, 0x07, 0x8000 | (i << 12) | 0xff);
+
+	/* Clear all trunk mappings. */
+	for (i = 0; i < 16; i++)
+		REG_WRITE(REG_GLOBAL2, 0x08, 0x8000 | (i << 11));
+
+	/* Disable ingress rate limiting by resetting all ingress
+	 * rate limit registers to their initial state.
+	 */
+	for (i = 0; i < 6; i++)
+		REG_WRITE(REG_GLOBAL2, 0x09, 0x9000 | (i << 8));
+
+	/* Initialise cross-chip port VLAN table to reset defaults. */
+	REG_WRITE(REG_GLOBAL2, 0x0b, 0x9000);
+
+	/* Clear the priority override table. */
+	for (i = 0; i < 16; i++)
+		REG_WRITE(REG_GLOBAL2, 0x0f, 0x8000 | (i << 8));
+
+	/* @@@ initialise AVB (22/23) watchdog (27) sdet (29) registers */
+
+	return 0;
+}
+
+static int mv88e6171_setup_port(struct dsa_switch *ds, int p)
+{
+	int addr = REG_PORT(p);
+	u16 val;
+
+	/* MAC Forcing register: don't force link, speed, duplex
+	 * or flow control state to any particular values on physical
+	 * ports, but force the CPU port and all DSA ports to 1000 Mb/s
+	 * full duplex.
+	 */
+	val = REG_READ(addr, 0x01);
+	if (dsa_is_cpu_port(ds, p) || ds->dsa_port_mask & (1 << p))
+		REG_WRITE(addr, 0x01, val | 0x003e);
+	else
+		REG_WRITE(addr, 0x01, val | 0x0003);
+
+	/* Do not limit the period of time that this port can be
+	 * paused for by the remote end or the period of time that
+	 * this port can pause the remote end.
+	 */
+	REG_WRITE(addr, 0x02, 0x0000);
+
+	/* Port Control: disable Drop-on-Unlock, disable Drop-on-Lock,
+	 * disable Header mode, enable IGMP/MLD snooping, disable VLAN
+	 * tunneling, determine priority by looking at 802.1p and IP
+	 * priority fields (IP prio has precedence), and set STP state
+	 * to Forwarding.
+	 *
+	 * If this is the CPU link, use DSA or EDSA tagging depending
+	 * on which tagging mode was configured.
+	 *
+	 * If this is a link to another switch, use DSA tagging mode.
+	 *
+	 * If this is the upstream port for this switch, enable
+	 * forwarding of unknown unicasts and multicasts.
+	 */
+	val = 0x0433;
+	if (dsa_is_cpu_port(ds, p)) {
+		if (ds->dst->tag_protocol == DSA_TAG_PROTO_EDSA)
+			val |= 0x3300;
+		else
+			val |= 0x0100;
+	}
+	if (ds->dsa_port_mask & (1 << p))
+		val |= 0x0100;
+	if (p == dsa_upstream_port(ds))
+		val |= 0x000c;
+	REG_WRITE(addr, 0x04, val);
+
+	/* Port Control 2: don't force a good FCS, set the maximum
+	 * frame size to 10240 bytes, don't let the switch add or
+	 * strip 802.1q tags, don't discard tagged or untagged frames
+	 * on this port, do a destination address lookup on all
+	 * received packets as usual, disable ARP mirroring and don't
+	 * send a copy of all transmitted/received frames on this port
+	 * to the CPU.
+	 */
+	REG_WRITE(addr, 0x08, 0x2080);
+
+	/* Egress rate control: disable egress rate control. */
+	REG_WRITE(addr, 0x09, 0x0001);
+
+	/* Egress rate control 2: disable egress rate control. */
+	REG_WRITE(addr, 0x0a, 0x0000);
+
+	/* Port Association Vector: when learning source addresses
+	 * of packets, add the address to the address database using
+	 * a port bitmap that has only the bit for this port set and
+	 * the other bits clear.
+	 */
+	REG_WRITE(addr, 0x0b, 1 << p);
+
+	/* Port ATU control: disable limiting the number of address
+	 * database entries that this port is allowed to use.
+	 */
+	REG_WRITE(addr, 0x0c, 0x0000);
+
+	/* Priority Override: disable DA, SA and VTU priority override. */
+	REG_WRITE(addr, 0x0d, 0x0000);
+
+	/* Port Ethertype: use the Ethertype DSA Ethertype value. */
+	REG_WRITE(addr, 0x0f, ETH_P_EDSA);
+
+	/* Tag Remap: use an identity 802.1p prio -> switch prio
+	 * mapping.
+	 */
+	REG_WRITE(addr, 0x18, 0x3210);
+
+	/* Tag Remap 2: use an identity 802.1p prio -> switch prio
+	 * mapping.
+	 */
+	REG_WRITE(addr, 0x19, 0x7654);
+
+	return mv88e6xxx_setup_port_common(ds, p);
+}
+
+static int mv88e6171_setup(struct dsa_switch *ds)
+{
+	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+	int i;
+	int ret;
+
+	ret = mv88e6xxx_setup_common(ds);
+	if (ret < 0)
+		return ret;
+
+	ps->num_ports = 7;
+
+	ret = mv88e6xxx_switch_reset(ds, true);
+	if (ret < 0)
+		return ret;
+
+	/* @@@ initialise vtu and atu */
+
+	ret = mv88e6171_setup_global(ds);
+	if (ret < 0)
+		return ret;
+
+	for (i = 0; i < ps->num_ports; i++) {
+		if (!(dsa_is_cpu_port(ds, i) || ds->phys_port_mask & (1 << i)))
+			continue;
+
+		ret = mv88e6171_setup_port(ds, i);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int mv88e6171_get_eee(struct dsa_switch *ds, int port,
+			     struct ethtool_eee *e)
+{
+	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+
+	if (ps->id == PORT_SWITCH_ID_6172)
+		return mv88e6xxx_get_eee(ds, port, e);
+
+	return -EOPNOTSUPP;
+}
+
+static int mv88e6171_set_eee(struct dsa_switch *ds, int port,
+			     struct phy_device *phydev, struct ethtool_eee *e)
+{
+	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+
+	if (ps->id == PORT_SWITCH_ID_6172)
+		return mv88e6xxx_set_eee(ds, port, phydev, e);
+
+	return -EOPNOTSUPP;
+}
+
+struct dsa_switch_driver mv88e6171_switch_driver = {
+	.tag_protocol		= DSA_TAG_PROTO_EDSA,
+	.priv_size		= sizeof(struct mv88e6xxx_priv_state),
+	.probe			= mv88e6171_probe,
+	.setup			= mv88e6171_setup,
+	.set_addr		= mv88e6xxx_set_addr_indirect,
+	.phy_read		= mv88e6xxx_phy_read_indirect,
+	.phy_write		= mv88e6xxx_phy_write_indirect,
+	.poll_link		= mv88e6xxx_poll_link,
+	.get_strings		= mv88e6xxx_get_strings,
+	.get_ethtool_stats	= mv88e6xxx_get_ethtool_stats,
+	.get_sset_count		= mv88e6xxx_get_sset_count,
+	.set_eee		= mv88e6171_set_eee,
+	.get_eee		= mv88e6171_get_eee,
+#ifdef CONFIG_NET_DSA_HWMON
+	.get_temp               = mv88e6xxx_get_temp,
+#endif
+	.get_regs_len		= mv88e6xxx_get_regs_len,
+	.get_regs		= mv88e6xxx_get_regs,
+	.port_join_bridge       = mv88e6xxx_join_bridge,
+	.port_leave_bridge      = mv88e6xxx_leave_bridge,
+	.port_stp_update        = mv88e6xxx_port_stp_update,
+	.fdb_add		= mv88e6xxx_port_fdb_add,
+	.fdb_del		= mv88e6xxx_port_fdb_del,
+	.fdb_getnext		= mv88e6xxx_port_fdb_getnext,
+};
+
+MODULE_ALIAS("platform:mv88e6171");
+MODULE_ALIAS("platform:mv88e6172");
diff --git a/kernel/drivers/net/dsa/mv88e6352.c b/kernel/drivers/net/dsa/mv88e6352.c
new file mode 100644
index 000000000..126c11b81
--- /dev/null
+++ b/kernel/drivers/net/dsa/mv88e6352.c
@@ -0,0 +1,554 @@
+/*
+ * net/dsa/mv88e6352.c - Marvell 88e6352 switch chip support
+ *
+ * Copyright (c) 2014 Guenter Roeck
+ *
+ * Derived from mv88e6123_61_65.c
+ * Copyright (c) 2008-2009 Marvell Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/platform_device.h>
+#include <linux/phy.h>
+#include <net/dsa.h>
+#include "mv88e6xxx.h"
+
+static char *mv88e6352_probe(struct device *host_dev, int sw_addr)
+{
+	struct mii_bus *bus = dsa_host_dev_to_mii_bus(host_dev);
+	int ret;
+
+	if (bus == NULL)
+		return NULL;
+
+	ret = __mv88e6xxx_reg_read(bus, sw_addr, REG_PORT(0), PORT_SWITCH_ID);
+	if (ret >= 0) {
+		if ((ret & 0xfff0) == PORT_SWITCH_ID_6176)
+			return "Marvell 88E6176";
+		if (ret == PORT_SWITCH_ID_6352_A0)
+			return "Marvell 88E6352 (A0)";
+		if (ret == PORT_SWITCH_ID_6352_A1)
+			return "Marvell 88E6352 (A1)";
+		if ((ret & 0xfff0) == PORT_SWITCH_ID_6352)
+			return "Marvell 88E6352";
+	}
+
+	return NULL;
+}
+
+static int mv88e6352_setup_global(struct dsa_switch *ds)
+{
+	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+	int ret;
+	int i;
+
+	/* Discard packets with excessive collisions,
+	 * mask all interrupt sources, enable PPU (bit 14, undocumented).
+	 */
+	REG_WRITE(REG_GLOBAL, 0x04, 0x6000);
+
+	/* Set the default address aging time to 5 minutes, and
+	 * enable address learn messages to be sent to all message
+	 * ports.
+	 */
+	REG_WRITE(REG_GLOBAL, 0x0a, 0x0148);
+
+	/* Configure the priority mapping registers. */
+	ret = mv88e6xxx_config_prio(ds);
+	if (ret < 0)
+		return ret;
+
+	/* Configure the upstream port, and configure the upstream
+	 * port as the port to which ingress and egress monitor frames
+	 * are to be sent.
+	 */
+	REG_WRITE(REG_GLOBAL, 0x1a, (dsa_upstream_port(ds) * 0x1110));
+
+	/* Disable remote management for now, and set the switch's
+	 * DSA device number.
+	 */
+	REG_WRITE(REG_GLOBAL, 0x1c, ds->index & 0x1f);
+
+	/* Send all frames with destination addresses matching
+	 * 01:80:c2:00:00:2x to the CPU port.
+	 */
+	REG_WRITE(REG_GLOBAL2, 0x02, 0xffff);
+
+	/* Send all frames with destination addresses matching
+	 * 01:80:c2:00:00:0x to the CPU port.
+	 */
+	REG_WRITE(REG_GLOBAL2, 0x03, 0xffff);
+
+	/* Disable the loopback filter, disable flow control
+	 * messages, disable flood broadcast override, disable
+	 * removing of provider tags, disable ATU age violation
+	 * interrupts, disable tag flow control, force flow
+	 * control priority to the highest, and send all special
+	 * multicast frames to the CPU at the highest priority.
+	 */
+	REG_WRITE(REG_GLOBAL2, 0x05, 0x00ff);
+
+	/* Program the DSA routing table. */
+	for (i = 0; i < 32; i++) {
+		int nexthop = 0x1f;
+
+		if (i != ds->index && i < ds->dst->pd->nr_chips)
+			nexthop = ds->pd->rtable[i] & 0x1f;
+
+		REG_WRITE(REG_GLOBAL2, 0x06, 0x8000 | (i << 8) | nexthop);
+	}
+
+	/* Clear all trunk masks. */
+	for (i = 0; i < 8; i++)
+		REG_WRITE(REG_GLOBAL2, 0x07, 0x8000 | (i << 12) | 0x7f);
+
+	/* Clear all trunk mappings. */
+	for (i = 0; i < 16; i++)
+		REG_WRITE(REG_GLOBAL2, 0x08, 0x8000 | (i << 11));
+
+	/* Disable ingress rate limiting by resetting all ingress
+	 * rate limit registers to their initial state.
+	 */
+	for (i = 0; i < ps->num_ports; i++)
+		REG_WRITE(REG_GLOBAL2, 0x09, 0x9000 | (i << 8));
+
+	/* Initialise cross-chip port VLAN table to reset defaults. */
+	REG_WRITE(REG_GLOBAL2, 0x0b, 0x9000);
+
+	/* Clear the priority override table. */
+	for (i = 0; i < 16; i++)
+		REG_WRITE(REG_GLOBAL2, 0x0f, 0x8000 | (i << 8));
+
+	/* @@@ initialise AVB (22/23) watchdog (27) sdet (29) registers */
+
+	return 0;
+}
+
+static int mv88e6352_setup_port(struct dsa_switch *ds, int p)
+{
+	int addr = REG_PORT(p);
+	u16 val;
+
+	/* MAC Forcing register: don't force link, speed, duplex
+	 * or flow control state to any particular values on physical
+	 * ports, but force the CPU port and all DSA ports to 1000 Mb/s
+	 * full duplex.
+	 */
+	if (dsa_is_cpu_port(ds, p) || ds->dsa_port_mask & (1 << p))
+		REG_WRITE(addr, 0x01, 0x003e);
+	else
+		REG_WRITE(addr, 0x01, 0x0003);
+
+	/* Do not limit the period of time that this port can be
+	 * paused for by the remote end or the period of time that
+	 * this port can pause the remote end.
+	 */
+	REG_WRITE(addr, 0x02, 0x0000);
+
+	/* Port Control: disable Drop-on-Unlock, disable Drop-on-Lock,
+	 * disable Header mode, enable IGMP/MLD snooping, disable VLAN
+	 * tunneling, determine priority by looking at 802.1p and IP
+	 * priority fields (IP prio has precedence), and set STP state
+	 * to Forwarding.
+	 *
+	 * If this is the CPU link, use DSA or EDSA tagging depending
+	 * on which tagging mode was configured.
+	 *
+	 * If this is a link to another switch, use DSA tagging mode.
+	 *
+	 * If this is the upstream port for this switch, enable
+	 * forwarding of unknown unicasts and multicasts.
+	 */
+	val = 0x0433;
+	if (dsa_is_cpu_port(ds, p)) {
+		if (ds->dst->tag_protocol == DSA_TAG_PROTO_EDSA)
+			val |= 0x3300;
+		else
+			val |= 0x0100;
+	}
+	if (ds->dsa_port_mask & (1 << p))
+		val |= 0x0100;
+	if (p == dsa_upstream_port(ds))
+		val |= 0x000c;
+	REG_WRITE(addr, 0x04, val);
+
+	/* Port Control 2: don't force a good FCS, set the maximum
+	 * frame size to 10240 bytes, don't let the switch add or
+	 * strip 802.1q tags, don't discard tagged or untagged frames
+	 * on this port, do a destination address lookup on all
+	 * received packets as usual, disable ARP mirroring and don't
+	 * send a copy of all transmitted/received frames on this port
+	 * to the CPU.
+	 */
+	REG_WRITE(addr, 0x08, 0x2080);
+
+	/* Egress rate control: disable egress rate control. */
+	REG_WRITE(addr, 0x09, 0x0001);
+
+	/* Egress rate control 2: disable egress rate control. */
+	REG_WRITE(addr, 0x0a, 0x0000);
+
+	/* Port Association Vector: when learning source addresses
+	 * of packets, add the address to the address database using
+	 * a port bitmap that has only the bit for this port set and
+	 * the other bits clear.
+	 */
+	REG_WRITE(addr, 0x0b, 1 << p);
+
+	/* Port ATU control: disable limiting the number of address
+	 * database entries that this port is allowed to use.
+	 */
+	REG_WRITE(addr, 0x0c, 0x0000);
+
+	/* Priority Override: disable DA, SA and VTU priority override. */
+	REG_WRITE(addr, 0x0d, 0x0000);
+
+	/* Port Ethertype: use the Ethertype DSA Ethertype value. */
+	REG_WRITE(addr, 0x0f, ETH_P_EDSA);
+
+	/* Tag Remap: use an identity 802.1p prio -> switch prio
+	 * mapping.
+	 */
+	REG_WRITE(addr, 0x18, 0x3210);
+
+	/* Tag Remap 2: use an identity 802.1p prio -> switch prio
+	 * mapping.
+	 */
+	REG_WRITE(addr, 0x19, 0x7654);
+
+	return mv88e6xxx_setup_port_common(ds, p);
+}
+
+#ifdef CONFIG_NET_DSA_HWMON
+
+static int mv88e6352_get_temp(struct dsa_switch *ds, int *temp)
+{
+	int ret;
+
+	*temp = 0;
+
+	ret = mv88e6xxx_phy_page_read(ds, 0, 6, 27);
+	if (ret < 0)
+		return ret;
+
+	*temp = (ret & 0xff) - 25;
+
+	return 0;
+}
+
+static int mv88e6352_get_temp_limit(struct dsa_switch *ds, int *temp)
+{
+	int ret;
+
+	*temp = 0;
+
+	ret = mv88e6xxx_phy_page_read(ds, 0, 6, 26);
+	if (ret < 0)
+		return ret;
+
+	*temp = (((ret >> 8) & 0x1f) * 5) - 25;
+
+	return 0;
+}
+
+static int mv88e6352_set_temp_limit(struct dsa_switch *ds, int temp)
+{
+	int ret;
+
+	ret = mv88e6xxx_phy_page_read(ds, 0, 6, 26);
+	if (ret < 0)
+		return ret;
+	temp = clamp_val(DIV_ROUND_CLOSEST(temp, 5) + 5, 0, 0x1f);
+	return mv88e6xxx_phy_page_write(ds, 0, 6, 26,
+					(ret & 0xe0ff) | (temp << 8));
+}
+
+static int mv88e6352_get_temp_alarm(struct dsa_switch *ds, bool *alarm)
+{
+	int ret;
+
+	*alarm = false;
+
+	ret = mv88e6xxx_phy_page_read(ds, 0, 6, 26);
+	if (ret < 0)
+		return ret;
+
+	*alarm = !!(ret & 0x40);
+
+	return 0;
+}
+#endif /* CONFIG_NET_DSA_HWMON */
+
+static int mv88e6352_setup(struct dsa_switch *ds)
+{
+	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+	int ret;
+	int i;
+
+	ret = mv88e6xxx_setup_common(ds);
+	if (ret < 0)
+		return ret;
+
+	ps->num_ports = 7;
+
+	mutex_init(&ps->eeprom_mutex);
+
+	ret = mv88e6xxx_switch_reset(ds, true);
+	if (ret < 0)
+		return ret;
+
+	/* @@@ initialise vtu and atu */
+
+	ret = mv88e6352_setup_global(ds);
+	if (ret < 0)
+		return ret;
+
+	for (i = 0; i < ps->num_ports; i++) {
+		ret = mv88e6352_setup_port(ds, i);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int mv88e6352_read_eeprom_word(struct dsa_switch *ds, int addr)
+{
+	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+	int ret;
+
+	mutex_lock(&ps->eeprom_mutex);
+
+	ret = mv88e6xxx_reg_write(ds, REG_GLOBAL2, 0x14,
+				  0xc000 | (addr & 0xff));
+	if (ret < 0)
+		goto error;
+
+	ret = mv88e6xxx_eeprom_busy_wait(ds);
+	if (ret < 0)
+		goto error;
+
+	ret = mv88e6xxx_reg_read(ds, REG_GLOBAL2, 0x15);
+error:
+	mutex_unlock(&ps->eeprom_mutex);
+	return ret;
+}
+
+static int mv88e6352_get_eeprom(struct dsa_switch *ds,
+				struct ethtool_eeprom *eeprom, u8 *data)
+{
+	int offset;
+	int len;
+	int ret;
+
+	offset = eeprom->offset;
+	len = eeprom->len;
+	eeprom->len = 0;
+
+	eeprom->magic = 0xc3ec4951;
+
+	ret = mv88e6xxx_eeprom_load_wait(ds);
+	if (ret < 0)
+		return ret;
+
+	if (offset & 1) {
+		int word;
+
+		word = mv88e6352_read_eeprom_word(ds, offset >> 1);
+		if (word < 0)
+			return word;
+
+		*data++ = (word >> 8) & 0xff;
+
+		offset++;
+		len--;
+		eeprom->len++;
+	}
+
+	while (len >= 2) {
+		int word;
+
+		word = mv88e6352_read_eeprom_word(ds, offset >> 1);
+		if (word < 0)
+			return word;
+
+		*data++ = word & 0xff;
+		*data++ = (word >> 8) & 0xff;
+
+		offset += 2;
+		len -= 2;
+		eeprom->len += 2;
+	}
+
+	if (len) {
+		int word;
+
+		word = mv88e6352_read_eeprom_word(ds, offset >> 1);
+		if (word < 0)
+			return word;
+
+		*data++ = word & 0xff;
+
+		offset++;
+		len--;
+		eeprom->len++;
+	}
+
+	return 0;
+}
+
+static int mv88e6352_eeprom_is_readonly(struct dsa_switch *ds)
+{
+	int ret;
+
+	ret = mv88e6xxx_reg_read(ds, REG_GLOBAL2, 0x14);
+	if (ret < 0)
+		return ret;
+
+	if (!(ret & 0x0400))
+		return -EROFS;
+
+	return 0;
+}
+
+static int mv88e6352_write_eeprom_word(struct dsa_switch *ds, int addr,
+				       u16 data)
+{
+	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+	int ret;
+
+	mutex_lock(&ps->eeprom_mutex);
+
+	ret = mv88e6xxx_reg_write(ds, REG_GLOBAL2, 0x15, data);
+	if (ret < 0)
+		goto error;
+
+	ret = mv88e6xxx_reg_write(ds, REG_GLOBAL2, 0x14,
+				  0xb000 | (addr & 0xff));
+	if (ret < 0)
+		goto error;
+
+	ret = mv88e6xxx_eeprom_busy_wait(ds);
+error:
+	mutex_unlock(&ps->eeprom_mutex);
+	return ret;
+}
+
+static int mv88e6352_set_eeprom(struct dsa_switch *ds,
+				struct ethtool_eeprom *eeprom, u8 *data)
+{
+	int offset;
+	int ret;
+	int len;
+
+	if (eeprom->magic != 0xc3ec4951)
+		return -EINVAL;
+
+	ret = mv88e6352_eeprom_is_readonly(ds);
+	if (ret)
+		return ret;
+
+	offset = eeprom->offset;
+	len = eeprom->len;
+	eeprom->len = 0;
+
+	ret = mv88e6xxx_eeprom_load_wait(ds);
+	if (ret < 0)
+		return ret;
+
+	if (offset & 1) {
+		int word;
+
+		word = mv88e6352_read_eeprom_word(ds, offset >> 1);
+		if (word < 0)
+			return word;
+
+		word = (*data++ << 8) | (word & 0xff);
+
+		ret = mv88e6352_write_eeprom_word(ds, offset >> 1, word);
+		if (ret < 0)
+			return ret;
+
+		offset++;
+		len--;
+		eeprom->len++;
+	}
+
+	while (len >= 2) {
+		int word;
+
+		word = *data++;
+		word |= *data++ << 8;
+
+		ret = mv88e6352_write_eeprom_word(ds, offset >> 1, word);
+		if (ret < 0)
+			return ret;
+
+		offset += 2;
+		len -= 2;
+		eeprom->len += 2;
+	}
+
+	if (len) {
+		int word;
+
+		word = mv88e6352_read_eeprom_word(ds, offset >> 1);
+		if (word < 0)
+			return word;
+
+		word = (word & 0xff00) | *data++;
+
+		ret = mv88e6352_write_eeprom_word(ds, offset >> 1, word);
+		if (ret < 0)
+			return ret;
+
+		offset++;
+		len--;
+		eeprom->len++;
+	}
+
+	return 0;
+}
+
+struct dsa_switch_driver mv88e6352_switch_driver = {
+	.tag_protocol		= DSA_TAG_PROTO_EDSA,
+	.priv_size		= sizeof(struct mv88e6xxx_priv_state),
+	.probe			= mv88e6352_probe,
+	.setup			= mv88e6352_setup,
+	.set_addr		= mv88e6xxx_set_addr_indirect,
+	.phy_read		= mv88e6xxx_phy_read_indirect,
+	.phy_write		= mv88e6xxx_phy_write_indirect,
+	.poll_link		= mv88e6xxx_poll_link,
+	.get_strings		= mv88e6xxx_get_strings,
+	.get_ethtool_stats	= mv88e6xxx_get_ethtool_stats,
+	.get_sset_count		= mv88e6xxx_get_sset_count,
+	.set_eee		= mv88e6xxx_set_eee,
+	.get_eee		= mv88e6xxx_get_eee,
+#ifdef CONFIG_NET_DSA_HWMON
+	.get_temp		= mv88e6352_get_temp,
+	.get_temp_limit		= mv88e6352_get_temp_limit,
+	.set_temp_limit		= mv88e6352_set_temp_limit,
+	.get_temp_alarm		= mv88e6352_get_temp_alarm,
+#endif
+	.get_eeprom		= mv88e6352_get_eeprom,
+	.set_eeprom		= mv88e6352_set_eeprom,
+	.get_regs_len		= mv88e6xxx_get_regs_len,
+	.get_regs		= mv88e6xxx_get_regs,
+	.port_join_bridge	= mv88e6xxx_join_bridge,
+	.port_leave_bridge	= mv88e6xxx_leave_bridge,
+	.port_stp_update	= mv88e6xxx_port_stp_update,
+	.fdb_add		= mv88e6xxx_port_fdb_add,
+	.fdb_del		= mv88e6xxx_port_fdb_del,
+	.fdb_getnext		= mv88e6xxx_port_fdb_getnext,
+};
+
+MODULE_ALIAS("platform:mv88e6352");
diff --git a/kernel/drivers/net/dsa/mv88e6xxx.c b/kernel/drivers/net/dsa/mv88e6xxx.c
new file mode 100644
index 000000000..cf309aa92
--- /dev/null
+++ b/kernel/drivers/net/dsa/mv88e6xxx.c
@@ -0,0 +1,1486 @@
+/*
+ * net/dsa/mv88e6xxx.c - Marvell 88e6xxx switch chip support
+ * Copyright (c) 2008 Marvell Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/delay.h>
+#include <linux/etherdevice.h>
+#include <linux/if_bridge.h>
+#include <linux/jiffies.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/phy.h>
+#include <net/dsa.h>
+#include "mv88e6xxx.h"
+
+/* If the switch's ADDR[4:0] strap pins are strapped to zero, it will
+ * use all 32 SMI bus addresses on its SMI bus, and all switch registers
+ * will be directly accessible on some {device address,register address}
+ * pair.  If the ADDR[4:0] pins are not strapped to zero, the switch
+ * will only respond to SMI transactions to that specific address, and
+ * an indirect addressing mechanism needs to be used to access its
+ * registers.
+ */
+static int mv88e6xxx_reg_wait_ready(struct mii_bus *bus, int sw_addr)
+{
+	int ret;
+	int i;
+
+	for (i = 0; i < 16; i++) {
+		ret = mdiobus_read(bus, sw_addr, SMI_CMD);
+		if (ret < 0)
+			return ret;
+
+		if ((ret & SMI_CMD_BUSY) == 0)
+			return 0;
+	}
+
+	return -ETIMEDOUT;
+}
+
+int __mv88e6xxx_reg_read(struct mii_bus *bus, int sw_addr, int addr, int reg)
+{
+	int ret;
+
+	if (sw_addr == 0)
+		return mdiobus_read(bus, addr, reg);
+
+	/* Wait for the bus to become free. */
+	ret = mv88e6xxx_reg_wait_ready(bus, sw_addr);
+	if (ret < 0)
+		return ret;
+
+	/* Transmit the read command. */
+	ret = mdiobus_write(bus, sw_addr, SMI_CMD,
+			    SMI_CMD_OP_22_READ | (addr << 5) | reg);
+	if (ret < 0)
+		return ret;
+
+	/* Wait for the read command to complete. */
+	ret = mv88e6xxx_reg_wait_ready(bus, sw_addr);
+	if (ret < 0)
+		return ret;
+
+	/* Read the data. */
+	ret = mdiobus_read(bus, sw_addr, SMI_DATA);
+	if (ret < 0)
+		return ret;
+
+	return ret & 0xffff;
+}
+
+/* Must be called with SMI mutex held */
+static int _mv88e6xxx_reg_read(struct dsa_switch *ds, int addr, int reg)
+{
+	struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->master_dev);
+	int ret;
+
+	if (bus == NULL)
+		return -EINVAL;
+
+	ret = __mv88e6xxx_reg_read(bus, ds->pd->sw_addr, addr, reg);
+	if (ret < 0)
+		return ret;
+
+	dev_dbg(ds->master_dev, "<- addr: 0x%.2x reg: 0x%.2x val: 0x%.4x\n",
+		addr, reg, ret);
+
+	return ret;
+}
+
+int mv88e6xxx_reg_read(struct dsa_switch *ds, int addr, int reg)
+{
+	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+	int ret;
+
+	mutex_lock(&ps->smi_mutex);
+	ret = _mv88e6xxx_reg_read(ds, addr, reg);
+	mutex_unlock(&ps->smi_mutex);
+
+	return ret;
+}
+
+int __mv88e6xxx_reg_write(struct mii_bus *bus, int sw_addr, int addr,
+			  int reg, u16 val)
+{
+	int ret;
+
+	if (sw_addr == 0)
+		return mdiobus_write(bus, addr, reg, val);
+
+	/* Wait for the bus to become free. */
+	ret = mv88e6xxx_reg_wait_ready(bus, sw_addr);
+	if (ret < 0)
+		return ret;
+
+	/* Transmit the data to write. */
+	ret = mdiobus_write(bus, sw_addr, SMI_DATA, val);
+	if (ret < 0)
+		return ret;
+
+	/* Transmit the write command. */
+	ret = mdiobus_write(bus, sw_addr, SMI_CMD,
+			    SMI_CMD_OP_22_WRITE | (addr << 5) | reg);
+	if (ret < 0)
+		return ret;
+
+	/* Wait for the write command to complete. */
+	ret = mv88e6xxx_reg_wait_ready(bus, sw_addr);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+/* Must be called with SMI mutex held */
+static int _mv88e6xxx_reg_write(struct dsa_switch *ds, int addr, int reg,
+				u16 val)
+{
+	struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->master_dev);
+
+	if (bus == NULL)
+		return -EINVAL;
+
+	dev_dbg(ds->master_dev, "-> addr: 0x%.2x reg: 0x%.2x val: 0x%.4x\n",
+		addr, reg, val);
+
+	return __mv88e6xxx_reg_write(bus, ds->pd->sw_addr, addr, reg, val);
+}
+
+int mv88e6xxx_reg_write(struct dsa_switch *ds, int addr, int reg, u16 val)
+{
+	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+	int ret;
+
+	mutex_lock(&ps->smi_mutex);
+	ret = _mv88e6xxx_reg_write(ds, addr, reg, val);
+	mutex_unlock(&ps->smi_mutex);
+
+	return ret;
+}
+
+int mv88e6xxx_config_prio(struct dsa_switch *ds)
+{
+	/* Configure the IP ToS mapping registers. */
+	REG_WRITE(REG_GLOBAL, GLOBAL_IP_PRI_0, 0x0000);
+	REG_WRITE(REG_GLOBAL, GLOBAL_IP_PRI_1, 0x0000);
+	REG_WRITE(REG_GLOBAL, GLOBAL_IP_PRI_2, 0x5555);
+	REG_WRITE(REG_GLOBAL, GLOBAL_IP_PRI_3, 0x5555);
+	REG_WRITE(REG_GLOBAL, GLOBAL_IP_PRI_4, 0xaaaa);
+	REG_WRITE(REG_GLOBAL, GLOBAL_IP_PRI_5, 0xaaaa);
+	REG_WRITE(REG_GLOBAL, GLOBAL_IP_PRI_6, 0xffff);
+	REG_WRITE(REG_GLOBAL, GLOBAL_IP_PRI_7, 0xffff);
+
+	/* Configure the IEEE 802.1p priority mapping register. */
+	REG_WRITE(REG_GLOBAL, GLOBAL_IEEE_PRI, 0xfa41);
+
+	return 0;
+}
+
+int mv88e6xxx_set_addr_direct(struct dsa_switch *ds, u8 *addr)
+{
+	REG_WRITE(REG_GLOBAL, GLOBAL_MAC_01, (addr[0] << 8) | addr[1]);
+	REG_WRITE(REG_GLOBAL, GLOBAL_MAC_23, (addr[2] << 8) | addr[3]);
+	REG_WRITE(REG_GLOBAL, GLOBAL_MAC_45, (addr[4] << 8) | addr[5]);
+
+	return 0;
+}
+
+int mv88e6xxx_set_addr_indirect(struct dsa_switch *ds, u8 *addr)
+{
+	int i;
+	int ret;
+
+	for (i = 0; i < 6; i++) {
+		int j;
+
+		/* Write the MAC address byte. */
+		REG_WRITE(REG_GLOBAL2, GLOBAL2_SWITCH_MAC,
+			  GLOBAL2_SWITCH_MAC_BUSY | (i << 8) | addr[i]);
+
+		/* Wait for the write to complete. */
+		for (j = 0; j < 16; j++) {
+			ret = REG_READ(REG_GLOBAL2, GLOBAL2_SWITCH_MAC);
+			if ((ret & GLOBAL2_SWITCH_MAC_BUSY) == 0)
+				break;
+		}
+		if (j == 16)
+			return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+/* Must be called with phy mutex held */
+static int _mv88e6xxx_phy_read(struct dsa_switch *ds, int addr, int regnum)
+{
+	if (addr >= 0)
+		return mv88e6xxx_reg_read(ds, addr, regnum);
+	return 0xffff;
+}
+
+/* Must be called with phy mutex held */
+static int _mv88e6xxx_phy_write(struct dsa_switch *ds, int addr, int regnum,
+				u16 val)
+{
+	if (addr >= 0)
+		return mv88e6xxx_reg_write(ds, addr, regnum, val);
+	return 0;
+}
+
+#ifdef CONFIG_NET_DSA_MV88E6XXX_NEED_PPU
+static int mv88e6xxx_ppu_disable(struct dsa_switch *ds)
+{
+	int ret;
+	unsigned long timeout;
+
+	ret = REG_READ(REG_GLOBAL, GLOBAL_CONTROL);
+	REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL,
+		  ret & ~GLOBAL_CONTROL_PPU_ENABLE);
+
+	timeout = jiffies + 1 * HZ;
+	while (time_before(jiffies, timeout)) {
+		ret = REG_READ(REG_GLOBAL, GLOBAL_STATUS);
+		usleep_range(1000, 2000);
+		if ((ret & GLOBAL_STATUS_PPU_MASK) !=
+		    GLOBAL_STATUS_PPU_POLLING)
+			return 0;
+	}
+
+	return -ETIMEDOUT;
+}
+
+static int mv88e6xxx_ppu_enable(struct dsa_switch *ds)
+{
+	int ret;
+	unsigned long timeout;
+
+	ret = REG_READ(REG_GLOBAL, GLOBAL_CONTROL);
+	REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL, ret | GLOBAL_CONTROL_PPU_ENABLE);
+
+	timeout = jiffies + 1 * HZ;
+	while (time_before(jiffies, timeout)) {
+		ret = REG_READ(REG_GLOBAL, GLOBAL_STATUS);
+		usleep_range(1000, 2000);
+		if ((ret & GLOBAL_STATUS_PPU_MASK) ==
+		    GLOBAL_STATUS_PPU_POLLING)
+			return 0;
+	}
+
+	return -ETIMEDOUT;
+}
+
+static void mv88e6xxx_ppu_reenable_work(struct work_struct *ugly)
+{
+	struct mv88e6xxx_priv_state *ps;
+
+	ps = container_of(ugly, struct mv88e6xxx_priv_state, ppu_work);
+	if (mutex_trylock(&ps->ppu_mutex)) {
+		struct dsa_switch *ds = ((struct dsa_switch *)ps) - 1;
+
+		if (mv88e6xxx_ppu_enable(ds) == 0)
+			ps->ppu_disabled = 0;
+		mutex_unlock(&ps->ppu_mutex);
+	}
+}
+
+static void mv88e6xxx_ppu_reenable_timer(unsigned long _ps)
+{
+	struct mv88e6xxx_priv_state *ps = (void *)_ps;
+
+	schedule_work(&ps->ppu_work);
+}
+
+static int mv88e6xxx_ppu_access_get(struct dsa_switch *ds)
+{
+	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+	int ret;
+
+	mutex_lock(&ps->ppu_mutex);
+
+	/* If the PHY polling unit is enabled, disable it so that
+	 * we can access the PHY registers.  If it was already
+	 * disabled, cancel the timer that is going to re-enable
+	 * it.
+	 */
+	if (!ps->ppu_disabled) {
+		ret = mv88e6xxx_ppu_disable(ds);
+		if (ret < 0) {
+			mutex_unlock(&ps->ppu_mutex);
+			return ret;
+		}
+		ps->ppu_disabled = 1;
+	} else {
+		del_timer(&ps->ppu_timer);
+		ret = 0;
+	}
+
+	return ret;
+}
+
+static void mv88e6xxx_ppu_access_put(struct dsa_switch *ds)
+{
+	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+
+	/* Schedule a timer to re-enable the PHY polling unit. */
+	mod_timer(&ps->ppu_timer, jiffies + msecs_to_jiffies(10));
+	mutex_unlock(&ps->ppu_mutex);
+}
+
+void mv88e6xxx_ppu_state_init(struct dsa_switch *ds)
+{
+	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+
+	mutex_init(&ps->ppu_mutex);
+	INIT_WORK(&ps->ppu_work, mv88e6xxx_ppu_reenable_work);
+	init_timer(&ps->ppu_timer);
+	ps->ppu_timer.data = (unsigned long)ps;
+	ps->ppu_timer.function = mv88e6xxx_ppu_reenable_timer;
+}
+
+int mv88e6xxx_phy_read_ppu(struct dsa_switch *ds, int addr, int regnum)
+{
+	int ret;
+
+	ret = mv88e6xxx_ppu_access_get(ds);
+	if (ret >= 0) {
+		ret = mv88e6xxx_reg_read(ds, addr, regnum);
+		mv88e6xxx_ppu_access_put(ds);
+	}
+
+	return ret;
+}
+
+int mv88e6xxx_phy_write_ppu(struct dsa_switch *ds, int addr,
+			    int regnum, u16 val)
+{
+	int ret;
+
+	ret = mv88e6xxx_ppu_access_get(ds);
+	if (ret >= 0) {
+		ret = mv88e6xxx_reg_write(ds, addr, regnum, val);
+		mv88e6xxx_ppu_access_put(ds);
+	}
+
+	return ret;
+}
+#endif
+
+void mv88e6xxx_poll_link(struct dsa_switch *ds)
+{
+	int i;
+
+	for (i = 0; i < DSA_MAX_PORTS; i++) {
+		struct net_device *dev;
+		int uninitialized_var(port_status);
+		int link;
+		int speed;
+		int duplex;
+		int fc;
+
+		dev = ds->ports[i];
+		if (dev == NULL)
+			continue;
+
+		link = 0;
+		if (dev->flags & IFF_UP) {
+			port_status = mv88e6xxx_reg_read(ds, REG_PORT(i),
+							 PORT_STATUS);
+			if (port_status < 0)
+				continue;
+
+			link = !!(port_status & PORT_STATUS_LINK);
+		}
+
+		if (!link) {
+			if (netif_carrier_ok(dev)) {
+				netdev_info(dev, "link down\n");
+				netif_carrier_off(dev);
+			}
+			continue;
+		}
+
+		switch (port_status & PORT_STATUS_SPEED_MASK) {
+		case PORT_STATUS_SPEED_10:
+			speed = 10;
+			break;
+		case PORT_STATUS_SPEED_100:
+			speed = 100;
+			break;
+		case PORT_STATUS_SPEED_1000:
+			speed = 1000;
+			break;
+		default:
+			speed = -1;
+			break;
+		}
+		duplex = (port_status & PORT_STATUS_DUPLEX) ? 1 : 0;
+		fc = (port_status & PORT_STATUS_PAUSE_EN) ? 1 : 0;
+
+		if (!netif_carrier_ok(dev)) {
+			netdev_info(dev,
+				    "link up, %d Mb/s, %s duplex, flow control %sabled\n",
+				    speed,
+				    duplex ? "full" : "half",
+				    fc ? "en" : "dis");
+			netif_carrier_on(dev);
+		}
+	}
+}
+
+static bool mv88e6xxx_6352_family(struct dsa_switch *ds)
+{
+	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+
+	switch (ps->id) {
+	case PORT_SWITCH_ID_6352:
+	case PORT_SWITCH_ID_6172:
+	case PORT_SWITCH_ID_6176:
+		return true;
+	}
+	return false;
+}
+
+static int mv88e6xxx_stats_wait(struct dsa_switch *ds)
+{
+	int ret;
+	int i;
+
+	for (i = 0; i < 10; i++) {
+		ret = REG_READ(REG_GLOBAL, GLOBAL_STATS_OP);
+		if ((ret & GLOBAL_STATS_OP_BUSY) == 0)
+			return 0;
+	}
+
+	return -ETIMEDOUT;
+}
+
+static int mv88e6xxx_stats_snapshot(struct dsa_switch *ds, int port)
+{
+	int ret;
+
+	if (mv88e6xxx_6352_family(ds))
+		port = (port + 1) << 5;
+
+	/* Snapshot the hardware statistics counters for this port. */
+	REG_WRITE(REG_GLOBAL, GLOBAL_STATS_OP,
+		  GLOBAL_STATS_OP_CAPTURE_PORT |
+		  GLOBAL_STATS_OP_HIST_RX_TX | port);
+
+	/* Wait for the snapshotting to complete. */
+	ret = mv88e6xxx_stats_wait(ds);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static void mv88e6xxx_stats_read(struct dsa_switch *ds, int stat, u32 *val)
+{
+	u32 _val;
+	int ret;
+
+	*val = 0;
+
+	ret = mv88e6xxx_reg_write(ds, REG_GLOBAL, GLOBAL_STATS_OP,
+				  GLOBAL_STATS_OP_READ_CAPTURED |
+				  GLOBAL_STATS_OP_HIST_RX_TX | stat);
+	if (ret < 0)
+		return;
+
+	ret = mv88e6xxx_stats_wait(ds);
+	if (ret < 0)
+		return;
+
+	ret = mv88e6xxx_reg_read(ds, REG_GLOBAL, GLOBAL_STATS_COUNTER_32);
+	if (ret < 0)
+		return;
+
+	_val = ret << 16;
+
+	ret = mv88e6xxx_reg_read(ds, REG_GLOBAL, GLOBAL_STATS_COUNTER_01);
+	if (ret < 0)
+		return;
+
+	*val = _val | ret;
+}
+
+static struct mv88e6xxx_hw_stat mv88e6xxx_hw_stats[] = {
+	{ "in_good_octets", 8, 0x00, },
+	{ "in_bad_octets", 4, 0x02, },
+	{ "in_unicast", 4, 0x04, },
+	{ "in_broadcasts", 4, 0x06, },
+	{ "in_multicasts", 4, 0x07, },
+	{ "in_pause", 4, 0x16, },
+	{ "in_undersize", 4, 0x18, },
+	{ "in_fragments", 4, 0x19, },
+	{ "in_oversize", 4, 0x1a, },
+	{ "in_jabber", 4, 0x1b, },
+	{ "in_rx_error", 4, 0x1c, },
+	{ "in_fcs_error", 4, 0x1d, },
+	{ "out_octets", 8, 0x0e, },
+	{ "out_unicast", 4, 0x10, },
+	{ "out_broadcasts", 4, 0x13, },
+	{ "out_multicasts", 4, 0x12, },
+	{ "out_pause", 4, 0x15, },
+	{ "excessive", 4, 0x11, },
+	{ "collisions", 4, 0x1e, },
+	{ "deferred", 4, 0x05, },
+	{ "single", 4, 0x14, },
+	{ "multiple", 4, 0x17, },
+	{ "out_fcs_error", 4, 0x03, },
+	{ "late", 4, 0x1f, },
+	{ "hist_64bytes", 4, 0x08, },
+	{ "hist_65_127bytes", 4, 0x09, },
+	{ "hist_128_255bytes", 4, 0x0a, },
+	{ "hist_256_511bytes", 4, 0x0b, },
+	{ "hist_512_1023bytes", 4, 0x0c, },
+	{ "hist_1024_max_bytes", 4, 0x0d, },
+	/* Not all devices have the following counters */
+	{ "sw_in_discards", 4, 0x110, },
+	{ "sw_in_filtered", 2, 0x112, },
+	{ "sw_out_filtered", 2, 0x113, },
+
+};
+
+static bool have_sw_in_discards(struct dsa_switch *ds)
+{
+	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+
+	switch (ps->id) {
+	case PORT_SWITCH_ID_6095: case PORT_SWITCH_ID_6161:
+	case PORT_SWITCH_ID_6165: case PORT_SWITCH_ID_6171:
+	case PORT_SWITCH_ID_6172: case PORT_SWITCH_ID_6176:
+	case PORT_SWITCH_ID_6182: case PORT_SWITCH_ID_6185:
+	case PORT_SWITCH_ID_6352:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static void _mv88e6xxx_get_strings(struct dsa_switch *ds,
+				   int nr_stats,
+				   struct mv88e6xxx_hw_stat *stats,
+				   int port, uint8_t *data)
+{
+	int i;
+
+	for (i = 0; i < nr_stats; i++) {
+		memcpy(data + i * ETH_GSTRING_LEN,
+		       stats[i].string, ETH_GSTRING_LEN);
+	}
+}
+
+static void _mv88e6xxx_get_ethtool_stats(struct dsa_switch *ds,
+					 int nr_stats,
+					 struct mv88e6xxx_hw_stat *stats,
+					 int port, uint64_t *data)
+{
+	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+	int ret;
+	int i;
+
+	mutex_lock(&ps->stats_mutex);
+
+	ret = mv88e6xxx_stats_snapshot(ds, port);
+	if (ret < 0) {
+		mutex_unlock(&ps->stats_mutex);
+		return;
+	}
+
+	/* Read each of the counters. */
+	for (i = 0; i < nr_stats; i++) {
+		struct mv88e6xxx_hw_stat *s = stats + i;
+		u32 low;
+		u32 high = 0;
+
+		if (s->reg >= 0x100) {
+			ret = mv88e6xxx_reg_read(ds, REG_PORT(port),
+						 s->reg - 0x100);
+			if (ret < 0)
+				goto error;
+			low = ret;
+			if (s->sizeof_stat == 4) {
+				ret = mv88e6xxx_reg_read(ds, REG_PORT(port),
+							 s->reg - 0x100 + 1);
+				if (ret < 0)
+					goto error;
+				high = ret;
+			}
+			data[i] = (((u64)high) << 16) | low;
+			continue;
+		}
+		mv88e6xxx_stats_read(ds, s->reg, &low);
+		if (s->sizeof_stat == 8)
+			mv88e6xxx_stats_read(ds, s->reg + 1, &high);
+
+		data[i] = (((u64)high) << 32) | low;
+	}
+error:
+	mutex_unlock(&ps->stats_mutex);
+}
+
+/* All the statistics in the table */
+void
+mv88e6xxx_get_strings(struct dsa_switch *ds, int port, uint8_t *data)
+{
+	if (have_sw_in_discards(ds))
+		_mv88e6xxx_get_strings(ds, ARRAY_SIZE(mv88e6xxx_hw_stats),
+				       mv88e6xxx_hw_stats, port, data);
+	else
+		_mv88e6xxx_get_strings(ds, ARRAY_SIZE(mv88e6xxx_hw_stats) - 3,
+				       mv88e6xxx_hw_stats, port, data);
+}
+
+int mv88e6xxx_get_sset_count(struct dsa_switch *ds)
+{
+	if (have_sw_in_discards(ds))
+		return ARRAY_SIZE(mv88e6xxx_hw_stats);
+	return ARRAY_SIZE(mv88e6xxx_hw_stats) - 3;
+}
+
+void
+mv88e6xxx_get_ethtool_stats(struct dsa_switch *ds,
+			    int port, uint64_t *data)
+{
+	if (have_sw_in_discards(ds))
+		_mv88e6xxx_get_ethtool_stats(
+			ds, ARRAY_SIZE(mv88e6xxx_hw_stats),
+			mv88e6xxx_hw_stats, port, data);
+	else
+		_mv88e6xxx_get_ethtool_stats(
+			ds, ARRAY_SIZE(mv88e6xxx_hw_stats) - 3,
+			mv88e6xxx_hw_stats, port, data);
+}
+
+int mv88e6xxx_get_regs_len(struct dsa_switch *ds, int port)
+{
+	return 32 * sizeof(u16);
+}
+
+void mv88e6xxx_get_regs(struct dsa_switch *ds, int port,
+			struct ethtool_regs *regs, void *_p)
+{
+	u16 *p = _p;
+	int i;
+
+	regs->version = 0;
+
+	memset(p, 0xff, 32 * sizeof(u16));
+
+	for (i = 0; i < 32; i++) {
+		int ret;
+
+		ret = mv88e6xxx_reg_read(ds, REG_PORT(port), i);
+		if (ret >= 0)
+			p[i] = ret;
+	}
+}
+
+#ifdef CONFIG_NET_DSA_HWMON
+
+int  mv88e6xxx_get_temp(struct dsa_switch *ds, int *temp)
+{
+	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+	int ret;
+	int val;
+
+	*temp = 0;
+
+	mutex_lock(&ps->phy_mutex);
+
+	ret = _mv88e6xxx_phy_write(ds, 0x0, 0x16, 0x6);
+	if (ret < 0)
+		goto error;
+
+	/* Enable temperature sensor */
+	ret = _mv88e6xxx_phy_read(ds, 0x0, 0x1a);
+	if (ret < 0)
+		goto error;
+
+	ret = _mv88e6xxx_phy_write(ds, 0x0, 0x1a, ret | (1 << 5));
+	if (ret < 0)
+		goto error;
+
+	/* Wait for temperature to stabilize */
+	usleep_range(10000, 12000);
+
+	val = _mv88e6xxx_phy_read(ds, 0x0, 0x1a);
+	if (val < 0) {
+		ret = val;
+		goto error;
+	}
+
+	/* Disable temperature sensor */
+	ret = _mv88e6xxx_phy_write(ds, 0x0, 0x1a, ret & ~(1 << 5));
+	if (ret < 0)
+		goto error;
+
+	*temp = ((val & 0x1f) - 5) * 5;
+
+error:
+	_mv88e6xxx_phy_write(ds, 0x0, 0x16, 0x0);
+	mutex_unlock(&ps->phy_mutex);
+	return ret;
+}
+#endif /* CONFIG_NET_DSA_HWMON */
+
+static int mv88e6xxx_wait(struct dsa_switch *ds, int reg, int offset, u16 mask)
+{
+	unsigned long timeout = jiffies + HZ / 10;
+
+	while (time_before(jiffies, timeout)) {
+		int ret;
+
+		ret = REG_READ(reg, offset);
+		if (!(ret & mask))
+			return 0;
+
+		usleep_range(1000, 2000);
+	}
+	return -ETIMEDOUT;
+}
+
+int mv88e6xxx_phy_wait(struct dsa_switch *ds)
+{
+	return mv88e6xxx_wait(ds, REG_GLOBAL2, GLOBAL2_SMI_OP,
+			      GLOBAL2_SMI_OP_BUSY);
+}
+
+int mv88e6xxx_eeprom_load_wait(struct dsa_switch *ds)
+{
+	return mv88e6xxx_wait(ds, REG_GLOBAL2, GLOBAL2_EEPROM_OP,
+			      GLOBAL2_EEPROM_OP_LOAD);
+}
+
+int mv88e6xxx_eeprom_busy_wait(struct dsa_switch *ds)
+{
+	return mv88e6xxx_wait(ds, REG_GLOBAL2, GLOBAL2_EEPROM_OP,
+			      GLOBAL2_EEPROM_OP_BUSY);
+}
+
+/* Must be called with SMI lock held */
+static int _mv88e6xxx_wait(struct dsa_switch *ds, int reg, int offset, u16 mask)
+{
+	unsigned long timeout = jiffies + HZ / 10;
+
+	while (time_before(jiffies, timeout)) {
+		int ret;
+
+		ret = _mv88e6xxx_reg_read(ds, reg, offset);
+		if (ret < 0)
+			return ret;
+		if (!(ret & mask))
+			return 0;
+
+		usleep_range(1000, 2000);
+	}
+	return -ETIMEDOUT;
+}
+
+/* Must be called with SMI lock held */
+static int _mv88e6xxx_atu_wait(struct dsa_switch *ds)
+{
+	return _mv88e6xxx_wait(ds, REG_GLOBAL, GLOBAL_ATU_OP,
+			       GLOBAL_ATU_OP_BUSY);
+}
+
+/* Must be called with phy mutex held */
+static int _mv88e6xxx_phy_read_indirect(struct dsa_switch *ds, int addr,
+					int regnum)
+{
+	int ret;
+
+	REG_WRITE(REG_GLOBAL2, GLOBAL2_SMI_OP,
+		  GLOBAL2_SMI_OP_22_READ | (addr << 5) | regnum);
+
+	ret = mv88e6xxx_phy_wait(ds);
+	if (ret < 0)
+		return ret;
+
+	return REG_READ(REG_GLOBAL2, GLOBAL2_SMI_DATA);
+}
+
+/* Must be called with phy mutex held */
+static int _mv88e6xxx_phy_write_indirect(struct dsa_switch *ds, int addr,
+					 int regnum, u16 val)
+{
+	REG_WRITE(REG_GLOBAL2, GLOBAL2_SMI_DATA, val);
+	REG_WRITE(REG_GLOBAL2, GLOBAL2_SMI_OP,
+		  GLOBAL2_SMI_OP_22_WRITE | (addr << 5) | regnum);
+
+	return mv88e6xxx_phy_wait(ds);
+}
+
+int mv88e6xxx_get_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e)
+{
+	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+	int reg;
+
+	mutex_lock(&ps->phy_mutex);
+
+	reg = _mv88e6xxx_phy_read_indirect(ds, port, 16);
+	if (reg < 0)
+		goto out;
+
+	e->eee_enabled = !!(reg & 0x0200);
+	e->tx_lpi_enabled = !!(reg & 0x0100);
+
+	reg = mv88e6xxx_reg_read(ds, REG_PORT(port), PORT_STATUS);
+	if (reg < 0)
+		goto out;
+
+	e->eee_active = !!(reg & PORT_STATUS_EEE);
+	reg = 0;
+
+out:
+	mutex_unlock(&ps->phy_mutex);
+	return reg;
+}
+
+int mv88e6xxx_set_eee(struct dsa_switch *ds, int port,
+		      struct phy_device *phydev, struct ethtool_eee *e)
+{
+	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+	int reg;
+	int ret;
+
+	mutex_lock(&ps->phy_mutex);
+
+	ret = _mv88e6xxx_phy_read_indirect(ds, port, 16);
+	if (ret < 0)
+		goto out;
+
+	reg = ret & ~0x0300;
+	if (e->eee_enabled)
+		reg |= 0x0200;
+	if (e->tx_lpi_enabled)
+		reg |= 0x0100;
+
+	ret = _mv88e6xxx_phy_write_indirect(ds, port, 16, reg);
+out:
+	mutex_unlock(&ps->phy_mutex);
+
+	return ret;
+}
+
+static int _mv88e6xxx_atu_cmd(struct dsa_switch *ds, int fid, u16 cmd)
+{
+	int ret;
+
+	ret = _mv88e6xxx_reg_write(ds, REG_GLOBAL, 0x01, fid);
+	if (ret < 0)
+		return ret;
+
+	ret = _mv88e6xxx_reg_write(ds, REG_GLOBAL, GLOBAL_ATU_OP, cmd);
+	if (ret < 0)
+		return ret;
+
+	return _mv88e6xxx_atu_wait(ds);
+}
+
+static int _mv88e6xxx_flush_fid(struct dsa_switch *ds, int fid)
+{
+	int ret;
+
+	ret = _mv88e6xxx_atu_wait(ds);
+	if (ret < 0)
+		return ret;
+
+	return _mv88e6xxx_atu_cmd(ds, fid, GLOBAL_ATU_OP_FLUSH_NON_STATIC_DB);
+}
+
+static int mv88e6xxx_set_port_state(struct dsa_switch *ds, int port, u8 state)
+{
+	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+	int reg, ret = 0;
+	u8 oldstate;
+
+	mutex_lock(&ps->smi_mutex);
+
+	reg = _mv88e6xxx_reg_read(ds, REG_PORT(port), PORT_CONTROL);
+	if (reg < 0) {
+		ret = reg;
+		goto abort;
+	}
+
+	oldstate = reg & PORT_CONTROL_STATE_MASK;
+	if (oldstate != state) {
+		/* Flush forwarding database if we're moving a port
+		 * from Learning or Forwarding state to Disabled or
+		 * Blocking or Listening state.
+		 */
+		if (oldstate >= PORT_CONTROL_STATE_LEARNING &&
+		    state <= PORT_CONTROL_STATE_BLOCKING) {
+			ret = _mv88e6xxx_flush_fid(ds, ps->fid[port]);
+			if (ret)
+				goto abort;
+		}
+		reg = (reg & ~PORT_CONTROL_STATE_MASK) | state;
+		ret = _mv88e6xxx_reg_write(ds, REG_PORT(port), PORT_CONTROL,
+					   reg);
+	}
+
+abort:
+	mutex_unlock(&ps->smi_mutex);
+	return ret;
+}
+
+/* Must be called with smi lock held */
+static int _mv88e6xxx_update_port_config(struct dsa_switch *ds, int port)
+{
+	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+	u8 fid = ps->fid[port];
+	u16 reg = fid << 12;
+
+	if (dsa_is_cpu_port(ds, port))
+		reg |= ds->phys_port_mask;
+	else
+		reg |= (ps->bridge_mask[fid] |
+		       (1 << dsa_upstream_port(ds))) & ~(1 << port);
+
+	return _mv88e6xxx_reg_write(ds, REG_PORT(port), PORT_BASE_VLAN, reg);
+}
+
+/* Must be called with smi lock held */
+static int _mv88e6xxx_update_bridge_config(struct dsa_switch *ds, int fid)
+{
+	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+	int port;
+	u32 mask;
+	int ret;
+
+	mask = ds->phys_port_mask;
+	while (mask) {
+		port = __ffs(mask);
+		mask &= ~(1 << port);
+		if (ps->fid[port] != fid)
+			continue;
+
+		ret = _mv88e6xxx_update_port_config(ds, port);
+		if (ret)
+			return ret;
+	}
+
+	return _mv88e6xxx_flush_fid(ds, fid);
+}
+
+/* Bridge handling functions */
+
+int mv88e6xxx_join_bridge(struct dsa_switch *ds, int port, u32 br_port_mask)
+{
+	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+	int ret = 0;
+	u32 nmask;
+	int fid;
+
+	/* If the bridge group is not empty, join that group.
+	 * Otherwise create a new group.
+	 */
+	fid = ps->fid[port];
+	nmask = br_port_mask & ~(1 << port);
+	if (nmask)
+		fid = ps->fid[__ffs(nmask)];
+
+	nmask = ps->bridge_mask[fid] | (1 << port);
+	if (nmask != br_port_mask) {
+		netdev_err(ds->ports[port],
+			   "join: Bridge port mask mismatch fid=%d mask=0x%x expected 0x%x\n",
+			   fid, br_port_mask, nmask);
+		return -EINVAL;
+	}
+
+	mutex_lock(&ps->smi_mutex);
+
+	ps->bridge_mask[fid] = br_port_mask;
+
+	if (fid != ps->fid[port]) {
+		ps->fid_mask |= 1 << ps->fid[port];
+		ps->fid[port] = fid;
+		ret = _mv88e6xxx_update_bridge_config(ds, fid);
+	}
+
+	mutex_unlock(&ps->smi_mutex);
+
+	return ret;
+}
+
+int mv88e6xxx_leave_bridge(struct dsa_switch *ds, int port, u32 br_port_mask)
+{
+	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+	u8 fid, newfid;
+	int ret;
+
+	fid = ps->fid[port];
+
+	if (ps->bridge_mask[fid] != br_port_mask) {
+		netdev_err(ds->ports[port],
+			   "leave: Bridge port mask mismatch fid=%d mask=0x%x expected 0x%x\n",
+			   fid, br_port_mask, ps->bridge_mask[fid]);
+		return -EINVAL;
+	}
+
+	/* If the port was the last port of a bridge, we are done.
+	 * Otherwise assign a new fid to the port, and fix up
+	 * the bridge configuration.
+	 */
+	if (br_port_mask == (1 << port))
+		return 0;
+
+	mutex_lock(&ps->smi_mutex);
+
+	newfid = __ffs(ps->fid_mask);
+	ps->fid[port] = newfid;
+	ps->fid_mask &= (1 << newfid);
+	ps->bridge_mask[fid] &= ~(1 << port);
+	ps->bridge_mask[newfid] = 1 << port;
+
+	ret = _mv88e6xxx_update_bridge_config(ds, fid);
+	if (!ret)
+		ret = _mv88e6xxx_update_bridge_config(ds, newfid);
+
+	mutex_unlock(&ps->smi_mutex);
+
+	return ret;
+}
+
+int mv88e6xxx_port_stp_update(struct dsa_switch *ds, int port, u8 state)
+{
+	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+	int stp_state;
+
+	switch (state) {
+	case BR_STATE_DISABLED:
+		stp_state = PORT_CONTROL_STATE_DISABLED;
+		break;
+	case BR_STATE_BLOCKING:
+	case BR_STATE_LISTENING:
+		stp_state = PORT_CONTROL_STATE_BLOCKING;
+		break;
+	case BR_STATE_LEARNING:
+		stp_state = PORT_CONTROL_STATE_LEARNING;
+		break;
+	case BR_STATE_FORWARDING:
+	default:
+		stp_state = PORT_CONTROL_STATE_FORWARDING;
+		break;
+	}
+
+	netdev_dbg(ds->ports[port], "port state %d [%d]\n", state, stp_state);
+
+	/* mv88e6xxx_port_stp_update may be called with softirqs disabled,
+	 * so we can not update the port state directly but need to schedule it.
+	 */
+	ps->port_state[port] = stp_state;
+	set_bit(port, &ps->port_state_update_mask);
+	schedule_work(&ps->bridge_work);
+
+	return 0;
+}
+
+static int __mv88e6xxx_write_addr(struct dsa_switch *ds,
+				  const unsigned char *addr)
+{
+	int i, ret;
+
+	for (i = 0; i < 3; i++) {
+		ret = _mv88e6xxx_reg_write(
+			ds, REG_GLOBAL, GLOBAL_ATU_MAC_01 + i,
+			(addr[i * 2] << 8) | addr[i * 2 + 1]);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int __mv88e6xxx_read_addr(struct dsa_switch *ds, unsigned char *addr)
+{
+	int i, ret;
+
+	for (i = 0; i < 3; i++) {
+		ret = _mv88e6xxx_reg_read(ds, REG_GLOBAL,
+					  GLOBAL_ATU_MAC_01 + i);
+		if (ret < 0)
+			return ret;
+		addr[i * 2] = ret >> 8;
+		addr[i * 2 + 1] = ret & 0xff;
+	}
+
+	return 0;
+}
+
+static int __mv88e6xxx_port_fdb_cmd(struct dsa_switch *ds, int port,
+				    const unsigned char *addr, int state)
+{
+	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+	u8 fid = ps->fid[port];
+	int ret;
+
+	ret = _mv88e6xxx_atu_wait(ds);
+	if (ret < 0)
+		return ret;
+
+	ret = __mv88e6xxx_write_addr(ds, addr);
+	if (ret < 0)
+		return ret;
+
+	ret = _mv88e6xxx_reg_write(ds, REG_GLOBAL, GLOBAL_ATU_DATA,
+				   (0x10 << port) | state);
+	if (ret)
+		return ret;
+
+	ret = _mv88e6xxx_atu_cmd(ds, fid, GLOBAL_ATU_OP_LOAD_DB);
+
+	return ret;
+}
+
+int mv88e6xxx_port_fdb_add(struct dsa_switch *ds, int port,
+			   const unsigned char *addr, u16 vid)
+{
+	int state = is_multicast_ether_addr(addr) ?
+		GLOBAL_ATU_DATA_STATE_MC_STATIC :
+		GLOBAL_ATU_DATA_STATE_UC_STATIC;
+	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+	int ret;
+
+	mutex_lock(&ps->smi_mutex);
+	ret = __mv88e6xxx_port_fdb_cmd(ds, port, addr, state);
+	mutex_unlock(&ps->smi_mutex);
+
+	return ret;
+}
+
+int mv88e6xxx_port_fdb_del(struct dsa_switch *ds, int port,
+			   const unsigned char *addr, u16 vid)
+{
+	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+	int ret;
+
+	mutex_lock(&ps->smi_mutex);
+	ret = __mv88e6xxx_port_fdb_cmd(ds, port, addr,
+				       GLOBAL_ATU_DATA_STATE_UNUSED);
+	mutex_unlock(&ps->smi_mutex);
+
+	return ret;
+}
+
+static int __mv88e6xxx_port_getnext(struct dsa_switch *ds, int port,
+				    unsigned char *addr, bool *is_static)
+{
+	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+	u8 fid = ps->fid[port];
+	int ret, state;
+
+	ret = _mv88e6xxx_atu_wait(ds);
+	if (ret < 0)
+		return ret;
+
+	ret = __mv88e6xxx_write_addr(ds, addr);
+	if (ret < 0)
+		return ret;
+
+	do {
+		ret = _mv88e6xxx_atu_cmd(ds, fid,  GLOBAL_ATU_OP_GET_NEXT_DB);
+		if (ret < 0)
+			return ret;
+
+		ret = _mv88e6xxx_reg_read(ds, REG_GLOBAL, GLOBAL_ATU_DATA);
+		if (ret < 0)
+			return ret;
+		state = ret & GLOBAL_ATU_DATA_STATE_MASK;
+		if (state == GLOBAL_ATU_DATA_STATE_UNUSED)
+			return -ENOENT;
+	} while (!(((ret >> 4) & 0xff) & (1 << port)));
+
+	ret = __mv88e6xxx_read_addr(ds, addr);
+	if (ret < 0)
+		return ret;
+
+	*is_static = state == (is_multicast_ether_addr(addr) ?
+			       GLOBAL_ATU_DATA_STATE_MC_STATIC :
+			       GLOBAL_ATU_DATA_STATE_UC_STATIC);
+
+	return 0;
+}
+
+/* get next entry for port */
+int mv88e6xxx_port_fdb_getnext(struct dsa_switch *ds, int port,
+			       unsigned char *addr, bool *is_static)
+{
+	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+	int ret;
+
+	mutex_lock(&ps->smi_mutex);
+	ret = __mv88e6xxx_port_getnext(ds, port, addr, is_static);
+	mutex_unlock(&ps->smi_mutex);
+
+	return ret;
+}
+
+static void mv88e6xxx_bridge_work(struct work_struct *work)
+{
+	struct mv88e6xxx_priv_state *ps;
+	struct dsa_switch *ds;
+	int port;
+
+	ps = container_of(work, struct mv88e6xxx_priv_state, bridge_work);
+	ds = ((struct dsa_switch *)ps) - 1;
+
+	while (ps->port_state_update_mask) {
+		port = __ffs(ps->port_state_update_mask);
+		clear_bit(port, &ps->port_state_update_mask);
+		mv88e6xxx_set_port_state(ds, port, ps->port_state[port]);
+	}
+}
+
+int mv88e6xxx_setup_port_common(struct dsa_switch *ds, int port)
+{
+	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+	int ret, fid;
+
+	mutex_lock(&ps->smi_mutex);
+
+	/* Port Control 1: disable trunking, disable sending
+	 * learning messages to this port.
+	 */
+	ret = _mv88e6xxx_reg_write(ds, REG_PORT(port), PORT_CONTROL_1, 0x0000);
+	if (ret)
+		goto abort;
+
+	/* Port based VLAN map: give each port its own address
+	 * database, allow the CPU port to talk to each of the 'real'
+	 * ports, and allow each of the 'real' ports to only talk to
+	 * the upstream port.
+	 */
+	fid = __ffs(ps->fid_mask);
+	ps->fid[port] = fid;
+	ps->fid_mask &= ~(1 << fid);
+
+	if (!dsa_is_cpu_port(ds, port))
+		ps->bridge_mask[fid] = 1 << port;
+
+	ret = _mv88e6xxx_update_port_config(ds, port);
+	if (ret)
+		goto abort;
+
+	/* Default VLAN ID and priority: don't set a default VLAN
+	 * ID, and set the default packet priority to zero.
+	 */
+	ret = _mv88e6xxx_reg_write(ds, REG_PORT(port), PORT_DEFAULT_VLAN,
+				   0x0000);
+abort:
+	mutex_unlock(&ps->smi_mutex);
+	return ret;
+}
+
+int mv88e6xxx_setup_common(struct dsa_switch *ds)
+{
+	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+
+	mutex_init(&ps->smi_mutex);
+	mutex_init(&ps->stats_mutex);
+	mutex_init(&ps->phy_mutex);
+
+	ps->id = REG_READ(REG_PORT(0), PORT_SWITCH_ID) & 0xfff0;
+
+	ps->fid_mask = (1 << DSA_MAX_PORTS) - 1;
+
+	INIT_WORK(&ps->bridge_work, mv88e6xxx_bridge_work);
+
+	return 0;
+}
+
+int mv88e6xxx_switch_reset(struct dsa_switch *ds, bool ppu_active)
+{
+	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+	u16 is_reset = (ppu_active ? 0x8800 : 0xc800);
+	unsigned long timeout;
+	int ret;
+	int i;
+
+	/* Set all ports to the disabled state. */
+	for (i = 0; i < ps->num_ports; i++) {
+		ret = REG_READ(REG_PORT(i), PORT_CONTROL);
+		REG_WRITE(REG_PORT(i), PORT_CONTROL, ret & 0xfffc);
+	}
+
+	/* Wait for transmit queues to drain. */
+	usleep_range(2000, 4000);
+
+	/* Reset the switch. Keep the PPU active if requested. The PPU
+	 * needs to be active to support indirect phy register access
+	 * through global registers 0x18 and 0x19.
+	 */
+	if (ppu_active)
+		REG_WRITE(REG_GLOBAL, 0x04, 0xc000);
+	else
+		REG_WRITE(REG_GLOBAL, 0x04, 0xc400);
+
+	/* Wait up to one second for reset to complete. */
+	timeout = jiffies + 1 * HZ;
+	while (time_before(jiffies, timeout)) {
+		ret = REG_READ(REG_GLOBAL, 0x00);
+		if ((ret & is_reset) == is_reset)
+			break;
+		usleep_range(1000, 2000);
+	}
+	if (time_after(jiffies, timeout))
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
+int mv88e6xxx_phy_page_read(struct dsa_switch *ds, int port, int page, int reg)
+{
+	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+	int ret;
+
+	mutex_lock(&ps->phy_mutex);
+	ret = _mv88e6xxx_phy_write_indirect(ds, port, 0x16, page);
+	if (ret < 0)
+		goto error;
+	ret = _mv88e6xxx_phy_read_indirect(ds, port, reg);
+error:
+	_mv88e6xxx_phy_write_indirect(ds, port, 0x16, 0x0);
+	mutex_unlock(&ps->phy_mutex);
+	return ret;
+}
+
+int mv88e6xxx_phy_page_write(struct dsa_switch *ds, int port, int page,
+			     int reg, int val)
+{
+	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+	int ret;
+
+	mutex_lock(&ps->phy_mutex);
+	ret = _mv88e6xxx_phy_write_indirect(ds, port, 0x16, page);
+	if (ret < 0)
+		goto error;
+
+	ret = _mv88e6xxx_phy_write_indirect(ds, port, reg, val);
+error:
+	_mv88e6xxx_phy_write_indirect(ds, port, 0x16, 0x0);
+	mutex_unlock(&ps->phy_mutex);
+	return ret;
+}
+
+static int mv88e6xxx_port_to_phy_addr(struct dsa_switch *ds, int port)
+{
+	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+
+	if (port >= 0 && port < ps->num_ports)
+		return port;
+	return -EINVAL;
+}
+
+int
+mv88e6xxx_phy_read(struct dsa_switch *ds, int port, int regnum)
+{
+	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+	int addr = mv88e6xxx_port_to_phy_addr(ds, port);
+	int ret;
+
+	if (addr < 0)
+		return addr;
+
+	mutex_lock(&ps->phy_mutex);
+	ret = _mv88e6xxx_phy_read(ds, addr, regnum);
+	mutex_unlock(&ps->phy_mutex);
+	return ret;
+}
+
+int
+mv88e6xxx_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val)
+{
+	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+	int addr = mv88e6xxx_port_to_phy_addr(ds, port);
+	int ret;
+
+	if (addr < 0)
+		return addr;
+
+	mutex_lock(&ps->phy_mutex);
+	ret = _mv88e6xxx_phy_write(ds, addr, regnum, val);
+	mutex_unlock(&ps->phy_mutex);
+	return ret;
+}
+
+int
+mv88e6xxx_phy_read_indirect(struct dsa_switch *ds, int port, int regnum)
+{
+	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+	int addr = mv88e6xxx_port_to_phy_addr(ds, port);
+	int ret;
+
+	if (addr < 0)
+		return addr;
+
+	mutex_lock(&ps->phy_mutex);
+	ret = _mv88e6xxx_phy_read_indirect(ds, addr, regnum);
+	mutex_unlock(&ps->phy_mutex);
+	return ret;
+}
+
+int
+mv88e6xxx_phy_write_indirect(struct dsa_switch *ds, int port, int regnum,
+			     u16 val)
+{
+	struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+	int addr = mv88e6xxx_port_to_phy_addr(ds, port);
+	int ret;
+
+	if (addr < 0)
+		return addr;
+
+	mutex_lock(&ps->phy_mutex);
+	ret = _mv88e6xxx_phy_write_indirect(ds, addr, regnum, val);
+	mutex_unlock(&ps->phy_mutex);
+	return ret;
+}
+
+static int __init mv88e6xxx_init(void)
+{
+#if IS_ENABLED(CONFIG_NET_DSA_MV88E6131)
+	register_switch_driver(&mv88e6131_switch_driver);
+#endif
+#if IS_ENABLED(CONFIG_NET_DSA_MV88E6123_61_65)
+	register_switch_driver(&mv88e6123_61_65_switch_driver);
+#endif
+#if IS_ENABLED(CONFIG_NET_DSA_MV88E6352)
+	register_switch_driver(&mv88e6352_switch_driver);
+#endif
+#if IS_ENABLED(CONFIG_NET_DSA_MV88E6171)
+	register_switch_driver(&mv88e6171_switch_driver);
+#endif
+	return 0;
+}
+module_init(mv88e6xxx_init);
+
+static void __exit mv88e6xxx_cleanup(void)
+{
+#if IS_ENABLED(CONFIG_NET_DSA_MV88E6171)
+	unregister_switch_driver(&mv88e6171_switch_driver);
+#endif
+#if IS_ENABLED(CONFIG_NET_DSA_MV88E6352)
+	unregister_switch_driver(&mv88e6352_switch_driver);
+#endif
+#if IS_ENABLED(CONFIG_NET_DSA_MV88E6123_61_65)
+	unregister_switch_driver(&mv88e6123_61_65_switch_driver);
+#endif
+#if IS_ENABLED(CONFIG_NET_DSA_MV88E6131)
+	unregister_switch_driver(&mv88e6131_switch_driver);
+#endif
+}
+module_exit(mv88e6xxx_cleanup);
+
+MODULE_AUTHOR("Lennert Buytenhek <buytenh@wantstofly.org>");
+MODULE_DESCRIPTION("Driver for Marvell 88E6XXX ethernet switch chips");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/net/dsa/mv88e6xxx.h b/kernel/drivers/net/dsa/mv88e6xxx.h
new file mode 100644
index 000000000..e045154f3
--- /dev/null
+++ b/kernel/drivers/net/dsa/mv88e6xxx.h
@@ -0,0 +1,339 @@
+/*
+ * net/dsa/mv88e6xxx.h - Marvell 88e6xxx switch chip support
+ * Copyright (c) 2008 Marvell Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __MV88E6XXX_H
+#define __MV88E6XXX_H
+
+#define SMI_CMD			0x00
+#define SMI_CMD_BUSY		BIT(15)
+#define SMI_CMD_CLAUSE_22	BIT(12)
+#define SMI_CMD_OP_22_WRITE	((1 << 10) | SMI_CMD_BUSY | SMI_CMD_CLAUSE_22)
+#define SMI_CMD_OP_22_READ	((2 << 10) | SMI_CMD_BUSY | SMI_CMD_CLAUSE_22)
+#define SMI_CMD_OP_45_WRITE_ADDR	((0 << 10) | SMI_CMD_BUSY)
+#define SMI_CMD_OP_45_WRITE_DATA	((1 << 10) | SMI_CMD_BUSY)
+#define SMI_CMD_OP_45_READ_DATA		((2 << 10) | SMI_CMD_BUSY)
+#define SMI_CMD_OP_45_READ_DATA_INC	((3 << 10) | SMI_CMD_BUSY)
+#define SMI_DATA		0x01
+
+#define REG_PORT(p)		(0x10 + (p))
+#define PORT_STATUS		0x00
+#define PORT_STATUS_PAUSE_EN	BIT(15)
+#define PORT_STATUS_MY_PAUSE	BIT(14)
+#define PORT_STATUS_HD_FLOW	BIT(13)
+#define PORT_STATUS_PHY_DETECT	BIT(12)
+#define PORT_STATUS_LINK	BIT(11)
+#define PORT_STATUS_DUPLEX	BIT(10)
+#define PORT_STATUS_SPEED_MASK	0x0300
+#define PORT_STATUS_SPEED_10	0x0000
+#define PORT_STATUS_SPEED_100	0x0100
+#define PORT_STATUS_SPEED_1000	0x0200
+#define PORT_STATUS_EEE		BIT(6) /* 6352 */
+#define PORT_STATUS_AM_DIS	BIT(6) /* 6165 */
+#define PORT_STATUS_MGMII	BIT(6) /* 6185 */
+#define PORT_STATUS_TX_PAUSED	BIT(5)
+#define PORT_STATUS_FLOW_CTRL	BIT(4)
+#define PORT_PCS_CTRL		0x01
+#define PORT_SWITCH_ID		0x03
+#define PORT_SWITCH_ID_6085	0x04a0
+#define PORT_SWITCH_ID_6095	0x0950
+#define PORT_SWITCH_ID_6123	0x1210
+#define PORT_SWITCH_ID_6123_A1	0x1212
+#define PORT_SWITCH_ID_6123_A2	0x1213
+#define PORT_SWITCH_ID_6131	0x1060
+#define PORT_SWITCH_ID_6131_B2	0x1066
+#define PORT_SWITCH_ID_6152	0x1a40
+#define PORT_SWITCH_ID_6155	0x1a50
+#define PORT_SWITCH_ID_6161	0x1610
+#define PORT_SWITCH_ID_6161_A1	0x1612
+#define PORT_SWITCH_ID_6161_A2	0x1613
+#define PORT_SWITCH_ID_6165	0x1650
+#define PORT_SWITCH_ID_6165_A1	0x1652
+#define PORT_SWITCH_ID_6165_A2	0x1653
+#define PORT_SWITCH_ID_6171	0x1710
+#define PORT_SWITCH_ID_6172	0x1720
+#define PORT_SWITCH_ID_6176	0x1760
+#define PORT_SWITCH_ID_6182	0x1a60
+#define PORT_SWITCH_ID_6185	0x1a70
+#define PORT_SWITCH_ID_6352	0x3520
+#define PORT_SWITCH_ID_6352_A0	0x3521
+#define PORT_SWITCH_ID_6352_A1	0x3522
+#define PORT_CONTROL		0x04
+#define PORT_CONTROL_STATE_MASK		0x03
+#define PORT_CONTROL_STATE_DISABLED	0x00
+#define PORT_CONTROL_STATE_BLOCKING	0x01
+#define PORT_CONTROL_STATE_LEARNING	0x02
+#define PORT_CONTROL_STATE_FORWARDING	0x03
+#define PORT_CONTROL_1		0x05
+#define PORT_BASE_VLAN		0x06
+#define PORT_DEFAULT_VLAN	0x07
+#define PORT_CONTROL_2		0x08
+#define PORT_RATE_CONTROL	0x09
+#define PORT_RATE_CONTROL_2	0x0a
+#define PORT_ASSOC_VECTOR	0x0b
+#define PORT_IN_DISCARD_LO	0x10
+#define PORT_IN_DISCARD_HI	0x11
+#define PORT_IN_FILTERED	0x12
+#define PORT_OUT_FILTERED	0x13
+#define PORT_TAG_REGMAP_0123	0x19
+#define PORT_TAG_REGMAP_4567	0x1a
+
+#define REG_GLOBAL		0x1b
+#define GLOBAL_STATUS		0x00
+#define GLOBAL_STATUS_PPU_STATE BIT(15) /* 6351 and 6171 */
+/* Two bits for 6165, 6185 etc */
+#define GLOBAL_STATUS_PPU_MASK		(0x3 << 14)
+#define GLOBAL_STATUS_PPU_DISABLED_RST	(0x0 << 14)
+#define GLOBAL_STATUS_PPU_INITIALIZING	(0x1 << 14)
+#define GLOBAL_STATUS_PPU_DISABLED	(0x2 << 14)
+#define GLOBAL_STATUS_PPU_POLLING	(0x3 << 14)
+#define GLOBAL_MAC_01		0x01
+#define GLOBAL_MAC_23		0x02
+#define GLOBAL_MAC_45		0x03
+#define GLOBAL_CONTROL		0x04
+#define GLOBAL_CONTROL_SW_RESET		BIT(15)
+#define GLOBAL_CONTROL_PPU_ENABLE	BIT(14)
+#define GLOBAL_CONTROL_DISCARD_EXCESS	BIT(13) /* 6352 */
+#define GLOBAL_CONTROL_SCHED_PRIO	BIT(11) /* 6152 */
+#define GLOBAL_CONTROL_MAX_FRAME_1632	BIT(10) /* 6152 */
+#define GLOBAL_CONTROL_RELOAD_EEPROM	BIT(9)  /* 6152 */
+#define GLOBAL_CONTROL_DEVICE_EN	BIT(7)
+#define GLOBAL_CONTROL_STATS_DONE_EN	BIT(6)
+#define GLOBAL_CONTROL_VTU_PROBLEM_EN	BIT(5)
+#define GLOBAL_CONTROL_VTU_DONE_EN	BIT(4)
+#define GLOBAL_CONTROL_ATU_PROBLEM_EN	BIT(3)
+#define GLOBAL_CONTROL_ATU_DONE_EN	BIT(2)
+#define GLOBAL_CONTROL_TCAM_EN		BIT(1)
+#define GLOBAL_CONTROL_EEPROM_DONE_EN	BIT(0)
+#define GLOBAL_VTU_OP		0x05
+#define GLOBAL_VTU_VID		0x06
+#define GLOBAL_VTU_DATA_0_3	0x07
+#define GLOBAL_VTU_DATA_4_7	0x08
+#define GLOBAL_VTU_DATA_8_11	0x09
+#define GLOBAL_ATU_CONTROL	0x0a
+#define GLOBAL_ATU_OP		0x0b
+#define GLOBAL_ATU_OP_BUSY	BIT(15)
+#define GLOBAL_ATU_OP_NOP		(0 << 12)
+#define GLOBAL_ATU_OP_FLUSH_ALL		((1 << 12) | GLOBAL_ATU_OP_BUSY)
+#define GLOBAL_ATU_OP_FLUSH_NON_STATIC	((2 << 12) | GLOBAL_ATU_OP_BUSY)
+#define GLOBAL_ATU_OP_LOAD_DB		((3 << 12) | GLOBAL_ATU_OP_BUSY)
+#define GLOBAL_ATU_OP_GET_NEXT_DB	((4 << 12) | GLOBAL_ATU_OP_BUSY)
+#define GLOBAL_ATU_OP_FLUSH_DB		((5 << 12) | GLOBAL_ATU_OP_BUSY)
+#define GLOBAL_ATU_OP_FLUSH_NON_STATIC_DB ((6 << 12) | GLOBAL_ATU_OP_BUSY)
+#define GLOBAL_ATU_OP_GET_CLR_VIOLATION	  ((7 << 12) | GLOBAL_ATU_OP_BUSY)
+#define GLOBAL_ATU_DATA		0x0c
+#define GLOBAL_ATU_DATA_STATE_MASK		0x0f
+#define GLOBAL_ATU_DATA_STATE_UNUSED		0x00
+#define GLOBAL_ATU_DATA_STATE_UC_MGMT		0x0d
+#define GLOBAL_ATU_DATA_STATE_UC_STATIC		0x0e
+#define GLOBAL_ATU_DATA_STATE_UC_PRIO_OVER	0x0f
+#define GLOBAL_ATU_DATA_STATE_MC_NONE_RATE	0x05
+#define GLOBAL_ATU_DATA_STATE_MC_STATIC		0x07
+#define GLOBAL_ATU_DATA_STATE_MC_MGMT		0x0e
+#define GLOBAL_ATU_DATA_STATE_MC_PRIO_OVER	0x0f
+#define GLOBAL_ATU_MAC_01	0x0d
+#define GLOBAL_ATU_MAC_23	0x0e
+#define GLOBAL_ATU_MAC_45	0x0f
+#define GLOBAL_IP_PRI_0		0x10
+#define GLOBAL_IP_PRI_1		0x11
+#define GLOBAL_IP_PRI_2		0x12
+#define GLOBAL_IP_PRI_3		0x13
+#define GLOBAL_IP_PRI_4		0x14
+#define GLOBAL_IP_PRI_5		0x15
+#define GLOBAL_IP_PRI_6		0x16
+#define GLOBAL_IP_PRI_7		0x17
+#define GLOBAL_IEEE_PRI		0x18
+#define GLOBAL_CORE_TAG_TYPE	0x19
+#define GLOBAL_MONITOR_CONTROL	0x1a
+#define GLOBAL_CONTROL_2	0x1c
+#define GLOBAL_STATS_OP		0x1d
+#define GLOBAL_STATS_OP_BUSY	BIT(15)
+#define GLOBAL_STATS_OP_NOP		(0 << 12)
+#define GLOBAL_STATS_OP_FLUSH_ALL	((1 << 12) | GLOBAL_STATS_OP_BUSY)
+#define GLOBAL_STATS_OP_FLUSH_PORT	((2 << 12) | GLOBAL_STATS_OP_BUSY)
+#define GLOBAL_STATS_OP_READ_CAPTURED	((4 << 12) | GLOBAL_STATS_OP_BUSY)
+#define GLOBAL_STATS_OP_CAPTURE_PORT	((5 << 12) | GLOBAL_STATS_OP_BUSY)
+#define GLOBAL_STATS_OP_HIST_RX		((1 << 10) | GLOBAL_STATS_OP_BUSY)
+#define GLOBAL_STATS_OP_HIST_TX		((2 << 10) | GLOBAL_STATS_OP_BUSY)
+#define GLOBAL_STATS_OP_HIST_RX_TX	((3 << 10) | GLOBAL_STATS_OP_BUSY)
+#define GLOBAL_STATS_COUNTER_32	0x1e
+#define GLOBAL_STATS_COUNTER_01	0x1f
+
+#define REG_GLOBAL2		0x1c
+#define GLOBAL2_INT_SOURCE	0x00
+#define GLOBAL2_INT_MASK	0x01
+#define GLOBAL2_MGMT_EN_2X	0x02
+#define GLOBAL2_MGMT_EN_0X	0x03
+#define GLOBAL2_FLOW_CONTROL	0x04
+#define GLOBAL2_SWITCH_MGMT	0x05
+#define GLOBAL2_DEVICE_MAPPING	0x06
+#define GLOBAL2_TRUNK_MASK	0x07
+#define GLOBAL2_TRUNK_MAPPING	0x08
+#define GLOBAL2_INGRESS_OP	0x09
+#define GLOBAL2_INGRESS_DATA	0x0a
+#define GLOBAL2_PVT_ADDR	0x0b
+#define GLOBAL2_PVT_DATA	0x0c
+#define GLOBAL2_SWITCH_MAC	0x0d
+#define GLOBAL2_SWITCH_MAC_BUSY BIT(15)
+#define GLOBAL2_ATU_STATS	0x0e
+#define GLOBAL2_PRIO_OVERRIDE	0x0f
+#define GLOBAL2_EEPROM_OP	0x14
+#define GLOBAL2_EEPROM_OP_BUSY	BIT(15)
+#define GLOBAL2_EEPROM_OP_LOAD	BIT(11)
+#define GLOBAL2_EEPROM_DATA	0x15
+#define GLOBAL2_PTP_AVB_OP	0x16
+#define GLOBAL2_PTP_AVB_DATA	0x17
+#define GLOBAL2_SMI_OP		0x18
+#define GLOBAL2_SMI_OP_BUSY		BIT(15)
+#define GLOBAL2_SMI_OP_CLAUSE_22	BIT(12)
+#define GLOBAL2_SMI_OP_22_WRITE		((1 << 10) | GLOBAL2_SMI_OP_BUSY | \
+					 GLOBAL2_SMI_OP_CLAUSE_22)
+#define GLOBAL2_SMI_OP_22_READ		((2 << 10) | GLOBAL2_SMI_OP_BUSY | \
+					 GLOBAL2_SMI_OP_CLAUSE_22)
+#define GLOBAL2_SMI_OP_45_WRITE_ADDR	((0 << 10) | GLOBAL2_SMI_OP_BUSY)
+#define GLOBAL2_SMI_OP_45_WRITE_DATA	((1 << 10) | GLOBAL2_SMI_OP_BUSY)
+#define GLOBAL2_SMI_OP_45_READ_DATA	((2 << 10) | GLOBAL2_SMI_OP_BUSY)
+#define GLOBAL2_SMI_DATA	0x19
+#define GLOBAL2_SCRATCH_MISC	0x1a
+#define GLOBAL2_WDOG_CONTROL	0x1b
+#define GLOBAL2_QOS_WEIGHT	0x1c
+#define GLOBAL2_MISC		0x1d
+
+struct mv88e6xxx_priv_state {
+	/* When using multi-chip addressing, this mutex protects
+	 * access to the indirect access registers.  (In single-chip
+	 * mode, this mutex is effectively useless.)
+	 */
+	struct mutex	smi_mutex;
+
+#ifdef CONFIG_NET_DSA_MV88E6XXX_NEED_PPU
+	/* Handles automatic disabling and re-enabling of the PHY
+	 * polling unit.
+	 */
+	struct mutex		ppu_mutex;
+	int			ppu_disabled;
+	struct work_struct	ppu_work;
+	struct timer_list	ppu_timer;
+#endif
+
+	/* This mutex serialises access to the statistics unit.
+	 * Hold this mutex over snapshot + dump sequences.
+	 */
+	struct mutex	stats_mutex;
+
+	/* This mutex serializes phy access for chips with
+	 * indirect phy addressing. It is unused for chips
+	 * with direct phy access.
+	 */
+	struct mutex	phy_mutex;
+
+	/* This mutex serializes eeprom access for chips with
+	 * eeprom support.
+	 */
+	struct mutex eeprom_mutex;
+
+	int		id; /* switch product id */
+	int		num_ports;	/* number of switch ports */
+
+	/* hw bridging */
+
+	u32 fid_mask;
+	u8 fid[DSA_MAX_PORTS];
+	u16 bridge_mask[DSA_MAX_PORTS];
+
+	unsigned long port_state_update_mask;
+	u8 port_state[DSA_MAX_PORTS];
+
+	struct work_struct bridge_work;
+};
+
+struct mv88e6xxx_hw_stat {
+	char string[ETH_GSTRING_LEN];
+	int sizeof_stat;
+	int reg;
+};
+
+int mv88e6xxx_switch_reset(struct dsa_switch *ds, bool ppu_active);
+int mv88e6xxx_setup_port_common(struct dsa_switch *ds, int port);
+int mv88e6xxx_setup_common(struct dsa_switch *ds);
+int __mv88e6xxx_reg_read(struct mii_bus *bus, int sw_addr, int addr, int reg);
+int mv88e6xxx_reg_read(struct dsa_switch *ds, int addr, int reg);
+int __mv88e6xxx_reg_write(struct mii_bus *bus, int sw_addr, int addr,
+			  int reg, u16 val);
+int mv88e6xxx_reg_write(struct dsa_switch *ds, int addr, int reg, u16 val);
+int mv88e6xxx_config_prio(struct dsa_switch *ds);
+int mv88e6xxx_set_addr_direct(struct dsa_switch *ds, u8 *addr);
+int mv88e6xxx_set_addr_indirect(struct dsa_switch *ds, u8 *addr);
+int mv88e6xxx_phy_read(struct dsa_switch *ds, int port, int regnum);
+int mv88e6xxx_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val);
+int mv88e6xxx_phy_read_indirect(struct dsa_switch *ds, int port, int regnum);
+int mv88e6xxx_phy_write_indirect(struct dsa_switch *ds, int port, int regnum,
+				 u16 val);
+void mv88e6xxx_ppu_state_init(struct dsa_switch *ds);
+int mv88e6xxx_phy_read_ppu(struct dsa_switch *ds, int addr, int regnum);
+int mv88e6xxx_phy_write_ppu(struct dsa_switch *ds, int addr,
+			    int regnum, u16 val);
+void mv88e6xxx_poll_link(struct dsa_switch *ds);
+void mv88e6xxx_get_strings(struct dsa_switch *ds, int port, uint8_t *data);
+void mv88e6xxx_get_ethtool_stats(struct dsa_switch *ds, int port,
+				 uint64_t *data);
+int mv88e6xxx_get_sset_count(struct dsa_switch *ds);
+int mv88e6xxx_get_sset_count_basic(struct dsa_switch *ds);
+int mv88e6xxx_get_regs_len(struct dsa_switch *ds, int port);
+void mv88e6xxx_get_regs(struct dsa_switch *ds, int port,
+			struct ethtool_regs *regs, void *_p);
+int  mv88e6xxx_get_temp(struct dsa_switch *ds, int *temp);
+int mv88e6xxx_phy_wait(struct dsa_switch *ds);
+int mv88e6xxx_eeprom_load_wait(struct dsa_switch *ds);
+int mv88e6xxx_eeprom_busy_wait(struct dsa_switch *ds);
+int mv88e6xxx_phy_read_indirect(struct dsa_switch *ds, int addr, int regnum);
+int mv88e6xxx_phy_write_indirect(struct dsa_switch *ds, int addr, int regnum,
+				 u16 val);
+int mv88e6xxx_get_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e);
+int mv88e6xxx_set_eee(struct dsa_switch *ds, int port,
+		      struct phy_device *phydev, struct ethtool_eee *e);
+int mv88e6xxx_join_bridge(struct dsa_switch *ds, int port, u32 br_port_mask);
+int mv88e6xxx_leave_bridge(struct dsa_switch *ds, int port, u32 br_port_mask);
+int mv88e6xxx_port_stp_update(struct dsa_switch *ds, int port, u8 state);
+int mv88e6xxx_port_fdb_add(struct dsa_switch *ds, int port,
+			   const unsigned char *addr, u16 vid);
+int mv88e6xxx_port_fdb_del(struct dsa_switch *ds, int port,
+			   const unsigned char *addr, u16 vid);
+int mv88e6xxx_port_fdb_getnext(struct dsa_switch *ds, int port,
+			       unsigned char *addr, bool *is_static);
+int mv88e6xxx_phy_page_read(struct dsa_switch *ds, int port, int page, int reg);
+int mv88e6xxx_phy_page_write(struct dsa_switch *ds, int port, int page,
+			     int reg, int val);
+extern struct dsa_switch_driver mv88e6131_switch_driver;
+extern struct dsa_switch_driver mv88e6123_61_65_switch_driver;
+extern struct dsa_switch_driver mv88e6352_switch_driver;
+extern struct dsa_switch_driver mv88e6171_switch_driver;
+
+#define REG_READ(addr, reg)						\
+	({								\
+		int __ret;						\
+									\
+		__ret = mv88e6xxx_reg_read(ds, addr, reg);		\
+		if (__ret < 0)						\
+			return __ret;					\
+		__ret;							\
+	})
+
+#define REG_WRITE(addr, reg, val)					\
+	({								\
+		int __ret;						\
+									\
+		__ret = mv88e6xxx_reg_write(ds, addr, reg, val);	\
+		if (__ret < 0)						\
+			return __ret;					\
+	})
+
+
+
+#endif