diff options
author | 2015-08-04 12:17:53 -0700 | |
---|---|---|
committer | 2015-08-04 15:44:42 -0700 | |
commit | 9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 (patch) | |
tree | 1c9cafbcd35f783a87880a10f85d1a060db1a563 /kernel/drivers/net/dsa/mv88e6123_61_65.c | |
parent | 98260f3884f4a202f9ca5eabed40b1354c489b29 (diff) |
Add the rt linux 4.1.3-rt3 as base
Import the rt linux 4.1.3-rt3 as OPNFV kvm base.
It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:
commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Sat Jul 25 12:13:34 2015 +0200
Prepare v4.1.3-rt3
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.
Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>
Diffstat (limited to 'kernel/drivers/net/dsa/mv88e6123_61_65.c')
-rw-r--r-- | kernel/drivers/net/dsa/mv88e6123_61_65.c | 301 |
1 files changed, 301 insertions, 0 deletions
diff --git a/kernel/drivers/net/dsa/mv88e6123_61_65.c b/kernel/drivers/net/dsa/mv88e6123_61_65.c new file mode 100644 index 000000000..b4af6d5af --- /dev/null +++ b/kernel/drivers/net/dsa/mv88e6123_61_65.c @@ -0,0 +1,301 @@ +/* + * net/dsa/mv88e6123_61_65.c - Marvell 88e6123/6161/6165 switch chip support + * Copyright (c) 2008-2009 Marvell Semiconductor + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/delay.h> +#include <linux/jiffies.h> +#include <linux/list.h> +#include <linux/module.h> +#include <linux/netdevice.h> +#include <linux/phy.h> +#include <net/dsa.h> +#include "mv88e6xxx.h" + +static char *mv88e6123_61_65_probe(struct device *host_dev, int sw_addr) +{ + struct mii_bus *bus = dsa_host_dev_to_mii_bus(host_dev); + int ret; + + if (bus == NULL) + return NULL; + + ret = __mv88e6xxx_reg_read(bus, sw_addr, REG_PORT(0), PORT_SWITCH_ID); + if (ret >= 0) { + if (ret == PORT_SWITCH_ID_6123_A1) + return "Marvell 88E6123 (A1)"; + if (ret == PORT_SWITCH_ID_6123_A2) + return "Marvell 88E6123 (A2)"; + if ((ret & 0xfff0) == PORT_SWITCH_ID_6123) + return "Marvell 88E6123"; + + if (ret == PORT_SWITCH_ID_6161_A1) + return "Marvell 88E6161 (A1)"; + if (ret == PORT_SWITCH_ID_6161_A2) + return "Marvell 88E6161 (A2)"; + if ((ret & 0xfff0) == PORT_SWITCH_ID_6161) + return "Marvell 88E6161"; + + if (ret == PORT_SWITCH_ID_6165_A1) + return "Marvell 88E6165 (A1)"; + if (ret == PORT_SWITCH_ID_6165_A2) + return "Marvell 88e6165 (A2)"; + if ((ret & 0xfff0) == PORT_SWITCH_ID_6165) + return "Marvell 88E6165"; + } + + return NULL; +} + +static int mv88e6123_61_65_setup_global(struct dsa_switch *ds) +{ + int ret; + int i; + + /* Disable the PHY polling unit (since there won't be any + * external PHYs to poll), don't discard packets with + * excessive collisions, and mask all interrupt sources. + */ + REG_WRITE(REG_GLOBAL, 0x04, 0x0000); + + /* Set the default address aging time to 5 minutes, and + * enable address learn messages to be sent to all message + * ports. + */ + REG_WRITE(REG_GLOBAL, 0x0a, 0x0148); + + /* Configure the priority mapping registers. */ + ret = mv88e6xxx_config_prio(ds); + if (ret < 0) + return ret; + + /* Configure the upstream port, and configure the upstream + * port as the port to which ingress and egress monitor frames + * are to be sent. + */ + REG_WRITE(REG_GLOBAL, 0x1a, (dsa_upstream_port(ds) * 0x1110)); + + /* Disable remote management for now, and set the switch's + * DSA device number. + */ + REG_WRITE(REG_GLOBAL, 0x1c, ds->index & 0x1f); + + /* Send all frames with destination addresses matching + * 01:80:c2:00:00:2x to the CPU port. + */ + REG_WRITE(REG_GLOBAL2, 0x02, 0xffff); + + /* Send all frames with destination addresses matching + * 01:80:c2:00:00:0x to the CPU port. + */ + REG_WRITE(REG_GLOBAL2, 0x03, 0xffff); + + /* Disable the loopback filter, disable flow control + * messages, disable flood broadcast override, disable + * removing of provider tags, disable ATU age violation + * interrupts, disable tag flow control, force flow + * control priority to the highest, and send all special + * multicast frames to the CPU at the highest priority. + */ + REG_WRITE(REG_GLOBAL2, 0x05, 0x00ff); + + /* Program the DSA routing table. */ + for (i = 0; i < 32; i++) { + int nexthop; + + nexthop = 0x1f; + if (i != ds->index && i < ds->dst->pd->nr_chips) + nexthop = ds->pd->rtable[i] & 0x1f; + + REG_WRITE(REG_GLOBAL2, 0x06, 0x8000 | (i << 8) | nexthop); + } + + /* Clear all trunk masks. */ + for (i = 0; i < 8; i++) + REG_WRITE(REG_GLOBAL2, 0x07, 0x8000 | (i << 12) | 0xff); + + /* Clear all trunk mappings. */ + for (i = 0; i < 16; i++) + REG_WRITE(REG_GLOBAL2, 0x08, 0x8000 | (i << 11)); + + /* Disable ingress rate limiting by resetting all ingress + * rate limit registers to their initial state. + */ + for (i = 0; i < 6; i++) + REG_WRITE(REG_GLOBAL2, 0x09, 0x9000 | (i << 8)); + + /* Initialise cross-chip port VLAN table to reset defaults. */ + REG_WRITE(REG_GLOBAL2, 0x0b, 0x9000); + + /* Clear the priority override table. */ + for (i = 0; i < 16; i++) + REG_WRITE(REG_GLOBAL2, 0x0f, 0x8000 | (i << 8)); + + /* @@@ initialise AVB (22/23) watchdog (27) sdet (29) registers */ + + return 0; +} + +static int mv88e6123_61_65_setup_port(struct dsa_switch *ds, int p) +{ + int addr = REG_PORT(p); + u16 val; + + /* MAC Forcing register: don't force link, speed, duplex + * or flow control state to any particular values on physical + * ports, but force the CPU port and all DSA ports to 1000 Mb/s + * full duplex. + */ + if (dsa_is_cpu_port(ds, p) || ds->dsa_port_mask & (1 << p)) + REG_WRITE(addr, 0x01, 0x003e); + else + REG_WRITE(addr, 0x01, 0x0003); + + /* Do not limit the period of time that this port can be + * paused for by the remote end or the period of time that + * this port can pause the remote end. + */ + REG_WRITE(addr, 0x02, 0x0000); + + /* Port Control: disable Drop-on-Unlock, disable Drop-on-Lock, + * disable Header mode, enable IGMP/MLD snooping, disable VLAN + * tunneling, determine priority by looking at 802.1p and IP + * priority fields (IP prio has precedence), and set STP state + * to Forwarding. + * + * If this is the CPU link, use DSA or EDSA tagging depending + * on which tagging mode was configured. + * + * If this is a link to another switch, use DSA tagging mode. + * + * If this is the upstream port for this switch, enable + * forwarding of unknown unicasts and multicasts. + */ + val = 0x0433; + if (dsa_is_cpu_port(ds, p)) { + if (ds->dst->tag_protocol == DSA_TAG_PROTO_EDSA) + val |= 0x3300; + else + val |= 0x0100; + } + if (ds->dsa_port_mask & (1 << p)) + val |= 0x0100; + if (p == dsa_upstream_port(ds)) + val |= 0x000c; + REG_WRITE(addr, 0x04, val); + + /* Port Control 2: don't force a good FCS, set the maximum + * frame size to 10240 bytes, don't let the switch add or + * strip 802.1q tags, don't discard tagged or untagged frames + * on this port, do a destination address lookup on all + * received packets as usual, disable ARP mirroring and don't + * send a copy of all transmitted/received frames on this port + * to the CPU. + */ + REG_WRITE(addr, 0x08, 0x2080); + + /* Egress rate control: disable egress rate control. */ + REG_WRITE(addr, 0x09, 0x0001); + + /* Egress rate control 2: disable egress rate control. */ + REG_WRITE(addr, 0x0a, 0x0000); + + /* Port Association Vector: when learning source addresses + * of packets, add the address to the address database using + * a port bitmap that has only the bit for this port set and + * the other bits clear. + */ + REG_WRITE(addr, 0x0b, 1 << p); + + /* Port ATU control: disable limiting the number of address + * database entries that this port is allowed to use. + */ + REG_WRITE(addr, 0x0c, 0x0000); + + /* Priority Override: disable DA, SA and VTU priority override. */ + REG_WRITE(addr, 0x0d, 0x0000); + + /* Port Ethertype: use the Ethertype DSA Ethertype value. */ + REG_WRITE(addr, 0x0f, ETH_P_EDSA); + + /* Tag Remap: use an identity 802.1p prio -> switch prio + * mapping. + */ + REG_WRITE(addr, 0x18, 0x3210); + + /* Tag Remap 2: use an identity 802.1p prio -> switch prio + * mapping. + */ + REG_WRITE(addr, 0x19, 0x7654); + + return mv88e6xxx_setup_port_common(ds, p); +} + +static int mv88e6123_61_65_setup(struct dsa_switch *ds) +{ + struct mv88e6xxx_priv_state *ps = ds_to_priv(ds); + int i; + int ret; + + ret = mv88e6xxx_setup_common(ds); + if (ret < 0) + return ret; + + switch (ps->id) { + case PORT_SWITCH_ID_6123: + ps->num_ports = 3; + break; + case PORT_SWITCH_ID_6161: + case PORT_SWITCH_ID_6165: + ps->num_ports = 6; + break; + default: + return -ENODEV; + } + + ret = mv88e6xxx_switch_reset(ds, false); + if (ret < 0) + return ret; + + /* @@@ initialise vtu and atu */ + + ret = mv88e6123_61_65_setup_global(ds); + if (ret < 0) + return ret; + + for (i = 0; i < ps->num_ports; i++) { + ret = mv88e6123_61_65_setup_port(ds, i); + if (ret < 0) + return ret; + } + + return 0; +} + +struct dsa_switch_driver mv88e6123_61_65_switch_driver = { + .tag_protocol = DSA_TAG_PROTO_EDSA, + .priv_size = sizeof(struct mv88e6xxx_priv_state), + .probe = mv88e6123_61_65_probe, + .setup = mv88e6123_61_65_setup, + .set_addr = mv88e6xxx_set_addr_indirect, + .phy_read = mv88e6xxx_phy_read, + .phy_write = mv88e6xxx_phy_write, + .poll_link = mv88e6xxx_poll_link, + .get_strings = mv88e6xxx_get_strings, + .get_ethtool_stats = mv88e6xxx_get_ethtool_stats, + .get_sset_count = mv88e6xxx_get_sset_count, +#ifdef CONFIG_NET_DSA_HWMON + .get_temp = mv88e6xxx_get_temp, +#endif + .get_regs_len = mv88e6xxx_get_regs_len, + .get_regs = mv88e6xxx_get_regs, +}; + +MODULE_ALIAS("platform:mv88e6123"); +MODULE_ALIAS("platform:mv88e6161"); +MODULE_ALIAS("platform:mv88e6165"); |