summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/net/Kconfig
diff options
context:
space:
mode:
authorYunhong Jiang <yunhong.jiang@intel.com>2015-08-04 12:17:53 -0700
committerYunhong Jiang <yunhong.jiang@intel.com>2015-08-04 15:44:42 -0700
commit9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 (patch)
tree1c9cafbcd35f783a87880a10f85d1a060db1a563 /kernel/drivers/net/Kconfig
parent98260f3884f4a202f9ca5eabed40b1354c489b29 (diff)
Add the rt linux 4.1.3-rt3 as base
Import the rt linux 4.1.3-rt3 as OPNFV kvm base. It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and the base is: commit 0917f823c59692d751951bf5ea699a2d1e2f26a2 Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Date: Sat Jul 25 12:13:34 2015 +0200 Prepare v4.1.3-rt3 Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> We lose all the git history this way and it's not good. We should apply another opnfv project repo in future. Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423 Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>
Diffstat (limited to 'kernel/drivers/net/Kconfig')
-rw-r--r--kernel/drivers/net/Kconfig384
1 files changed, 384 insertions, 0 deletions
diff --git a/kernel/drivers/net/Kconfig b/kernel/drivers/net/Kconfig
new file mode 100644
index 000000000..df51d6025
--- /dev/null
+++ b/kernel/drivers/net/Kconfig
@@ -0,0 +1,384 @@
+#
+# Network device configuration
+#
+
+menuconfig NETDEVICES
+ default y if UML
+ depends on NET
+ bool "Network device support"
+ ---help---
+ You can say N here if you don't intend to connect your Linux box to
+ any other computer at all.
+
+ You'll have to say Y if your computer contains a network card that
+ you want to use under Linux. If you are going to run SLIP or PPP over
+ telephone line or null modem cable you need say Y here. Connecting
+ two machines with parallel ports using PLIP needs this, as well as
+ AX.25/KISS for sending Internet traffic over amateur radio links.
+
+ See also "The Linux Network Administrator's Guide" by Olaf Kirch and
+ Terry Dawson. Available at <http://www.tldp.org/guides.html>.
+
+ If unsure, say Y.
+
+# All the following symbols are dependent on NETDEVICES - do not repeat
+# that for each of the symbols.
+if NETDEVICES
+
+config MII
+ tristate
+
+config NET_CORE
+ default y
+ bool "Network core driver support"
+ ---help---
+ You can say N here if you do not intend to use any of the
+ networking core drivers (i.e. VLAN, bridging, bonding, etc.)
+
+if NET_CORE
+
+config BONDING
+ tristate "Bonding driver support"
+ depends on INET
+ depends on IPV6 || IPV6=n
+ ---help---
+ Say 'Y' or 'M' if you wish to be able to 'bond' multiple Ethernet
+ Channels together. This is called 'Etherchannel' by Cisco,
+ 'Trunking' by Sun, 802.3ad by the IEEE, and 'Bonding' in Linux.
+
+ The driver supports multiple bonding modes to allow for both high
+ performance and high availability operation.
+
+ Refer to <file:Documentation/networking/bonding.txt> for more
+ information.
+
+ To compile this driver as a module, choose M here: the module
+ will be called bonding.
+
+config DUMMY
+ tristate "Dummy net driver support"
+ ---help---
+ This is essentially a bit-bucket device (i.e. traffic you send to
+ this device is consigned into oblivion) with a configurable IP
+ address. It is most commonly used in order to make your currently
+ inactive SLIP address seem like a real address for local programs.
+ If you use SLIP or PPP, you might want to say Y here. Since this
+ thing often comes in handy, the default is Y. It won't enlarge your
+ kernel either. What a deal. Read about it in the Network
+ Administrator's Guide, available from
+ <http://www.tldp.org/docs.html#guide>.
+
+ To compile this driver as a module, choose M here: the module
+ will be called dummy.
+
+config EQUALIZER
+ tristate "EQL (serial line load balancing) support"
+ ---help---
+ If you have two serial connections to some other computer (this
+ usually requires two modems and two telephone lines) and you use
+ SLIP (the protocol for sending Internet traffic over telephone
+ lines) or PPP (a better SLIP) on them, you can make them behave like
+ one double speed connection using this driver. Naturally, this has
+ to be supported at the other end as well, either with a similar EQL
+ Linux driver or with a Livingston Portmaster 2e.
+
+ Say Y if you want this and read
+ <file:Documentation/networking/eql.txt>. You may also want to read
+ section 6.2 of the NET-3-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here: the module
+ will be called eql. If unsure, say N.
+
+config NET_FC
+ bool "Fibre Channel driver support"
+ depends on SCSI && PCI
+ help
+ Fibre Channel is a high speed serial protocol mainly used to connect
+ large storage devices to the computer; it is compatible with and
+ intended to replace SCSI.
+
+ If you intend to use Fibre Channel, you need to have a Fibre channel
+ adaptor card in your computer; say Y here and to the driver for your
+ adaptor below. You also should have said Y to "SCSI support" and
+ "SCSI generic support".
+
+config IFB
+ tristate "Intermediate Functional Block support"
+ depends on NET_CLS_ACT
+ ---help---
+ This is an intermediate driver that allows sharing of
+ resources.
+ To compile this driver as a module, choose M here: the module
+ will be called ifb. If you want to use more than one ifb
+ device at a time, you need to compile this driver as a module.
+ Instead of 'ifb', the devices will then be called 'ifb0',
+ 'ifb1' etc.
+ Look at the iproute2 documentation directory for usage etc
+
+source "drivers/net/team/Kconfig"
+
+config MACVLAN
+ tristate "MAC-VLAN support"
+ ---help---
+ This allows one to create virtual interfaces that map packets to
+ or from specific MAC addresses to a particular interface.
+
+ Macvlan devices can be added using the "ip" command from the
+ iproute2 package starting with the iproute2-2.6.23 release:
+
+ "ip link add link <real dev> [ address MAC ] [ NAME ] type macvlan"
+
+ To compile this driver as a module, choose M here: the module
+ will be called macvlan.
+
+config MACVTAP
+ tristate "MAC-VLAN based tap driver"
+ depends on MACVLAN
+ depends on INET
+ help
+ This adds a specialized tap character device driver that is based
+ on the MAC-VLAN network interface, called macvtap. A macvtap device
+ can be added in the same way as a macvlan device, using 'type
+ macvtap', and then be accessed through the tap user space interface.
+
+ To compile this driver as a module, choose M here: the module
+ will be called macvtap.
+
+
+config IPVLAN
+ tristate "IP-VLAN support"
+ depends on INET
+ depends on IPV6
+ ---help---
+ This allows one to create virtual devices off of a main interface
+ and packets will be delivered based on the dest L3 (IPv6/IPv4 addr)
+ on packets. All interfaces (including the main interface) share L2
+ making it transparent to the connected L2 switch.
+
+ Ipvlan devices can be added using the "ip" command from the
+ iproute2 package starting with the iproute2-3.19 release:
+
+ "ip link add link <main-dev> [ NAME ] type ipvlan"
+
+ To compile this driver as a module, choose M here: the module
+ will be called ipvlan.
+
+
+config VXLAN
+ tristate "Virtual eXtensible Local Area Network (VXLAN)"
+ depends on INET
+ select NET_UDP_TUNNEL
+ ---help---
+ This allows one to create vxlan virtual interfaces that provide
+ Layer 2 Networks over Layer 3 Networks. VXLAN is often used
+ to tunnel virtual network infrastructure in virtualized environments.
+ For more information see:
+ http://tools.ietf.org/html/draft-mahalingam-dutt-dcops-vxlan-02
+
+ To compile this driver as a module, choose M here: the module
+ will be called vxlan.
+
+config NETCONSOLE
+ tristate "Network console logging support"
+ ---help---
+ If you want to log kernel messages over the network, enable this.
+ See <file:Documentation/networking/netconsole.txt> for details.
+
+config NETCONSOLE_DYNAMIC
+ bool "Dynamic reconfiguration of logging targets"
+ depends on NETCONSOLE && SYSFS && CONFIGFS_FS && \
+ !(NETCONSOLE=y && CONFIGFS_FS=m)
+ help
+ This option enables the ability to dynamically reconfigure target
+ parameters (interface, IP addresses, port numbers, MAC addresses)
+ at runtime through a userspace interface exported using configfs.
+ See <file:Documentation/networking/netconsole.txt> for details.
+
+config NETPOLL
+ def_bool NETCONSOLE
+ select SRCU
+
+config NET_POLL_CONTROLLER
+ def_bool NETPOLL
+
+config NTB_NETDEV
+ tristate "Virtual Ethernet over NTB"
+ depends on NTB
+
+config RIONET
+ tristate "RapidIO Ethernet over messaging driver support"
+ depends on RAPIDIO
+
+config RIONET_TX_SIZE
+ int "Number of outbound queue entries"
+ depends on RIONET
+ default "128"
+
+config RIONET_RX_SIZE
+ int "Number of inbound queue entries"
+ depends on RIONET
+ default "128"
+
+config TUN
+ tristate "Universal TUN/TAP device driver support"
+ depends on INET
+ select CRC32
+ ---help---
+ TUN/TAP provides packet reception and transmission for user space
+ programs. It can be viewed as a simple Point-to-Point or Ethernet
+ device, which instead of receiving packets from a physical media,
+ receives them from user space program and instead of sending packets
+ via physical media writes them to the user space program.
+
+ When a program opens /dev/net/tun, driver creates and registers
+ corresponding net device tunX or tapX. After a program closed above
+ devices, driver will automatically delete tunXX or tapXX device and
+ all routes corresponding to it.
+
+ Please read <file:Documentation/networking/tuntap.txt> for more
+ information.
+
+ To compile this driver as a module, choose M here: the module
+ will be called tun.
+
+ If you don't know what to use this for, you don't need it.
+
+config VETH
+ tristate "Virtual ethernet pair device"
+ ---help---
+ This device is a local ethernet tunnel. Devices are created in pairs.
+ When one end receives the packet it appears on its pair and vice
+ versa.
+
+config VIRTIO_NET
+ tristate "Virtio network driver"
+ depends on VIRTIO
+ select AVERAGE
+ ---help---
+ This is the virtual network driver for virtio. It can be used with
+ lguest or QEMU based VMMs (like KVM or Xen). Say Y or M.
+
+config NLMON
+ tristate "Virtual netlink monitoring device"
+ ---help---
+ This option enables a monitoring net device for netlink skbs. The
+ purpose of this is to analyze netlink messages with packet sockets.
+ Thus applications like tcpdump will be able to see local netlink
+ messages if they tap into the netlink device, record pcaps for further
+ diagnostics, etc. This is mostly intended for developers or support
+ to debug netlink issues. If unsure, say N.
+
+endif # NET_CORE
+
+config SUNGEM_PHY
+ tristate
+
+source "drivers/net/arcnet/Kconfig"
+
+source "drivers/atm/Kconfig"
+
+source "drivers/net/caif/Kconfig"
+
+source "drivers/net/dsa/Kconfig"
+
+source "drivers/net/ethernet/Kconfig"
+
+source "drivers/net/fddi/Kconfig"
+
+source "drivers/net/hippi/Kconfig"
+
+config NET_SB1000
+ tristate "General Instruments Surfboard 1000"
+ depends on PNP
+ ---help---
+ This is a driver for the General Instrument (also known as
+ NextLevel) SURFboard 1000 internal
+ cable modem. This is an ISA card which is used by a number of cable
+ TV companies to provide cable modem access. It's a one-way
+ downstream-only cable modem, meaning that your upstream net link is
+ provided by your regular phone modem.
+
+ At present this driver only compiles as a module, so say M here if
+ you have this card. The module will be called sb1000. Then read
+ <file:Documentation/networking/README.sb1000> for information on how
+ to use this module, as it needs special ppp scripts for establishing
+ a connection. Further documentation and the necessary scripts can be
+ found at:
+
+ <http://www.jacksonville.net/~fventuri/>
+ <http://home.adelphia.net/~siglercm/sb1000.html>
+ <http://linuxpower.cx/~cable/>
+
+ If you don't have this card, of course say N.
+
+source "drivers/net/phy/Kconfig"
+
+source "drivers/net/plip/Kconfig"
+
+source "drivers/net/ppp/Kconfig"
+
+source "drivers/net/slip/Kconfig"
+
+source "drivers/s390/net/Kconfig"
+
+source "drivers/net/usb/Kconfig"
+
+source "drivers/net/wireless/Kconfig"
+
+source "drivers/net/wimax/Kconfig"
+
+source "drivers/net/wan/Kconfig"
+
+source "drivers/net/ieee802154/Kconfig"
+
+config XEN_NETDEV_FRONTEND
+ tristate "Xen network device frontend driver"
+ depends on XEN
+ select XEN_XENBUS_FRONTEND
+ default y
+ help
+ This driver provides support for Xen paravirtual network
+ devices exported by a Xen network driver domain (often
+ domain 0).
+
+ The corresponding Linux backend driver is enabled by the
+ CONFIG_XEN_NETDEV_BACKEND option.
+
+ If you are compiling a kernel for use as Xen guest, you
+ should say Y here. To compile this driver as a module, chose
+ M here: the module will be called xen-netfront.
+
+config XEN_NETDEV_BACKEND
+ tristate "Xen backend network device"
+ depends on XEN_BACKEND
+ help
+ This driver allows the kernel to act as a Xen network driver
+ domain which exports paravirtual network devices to other
+ Xen domains. These devices can be accessed by any operating
+ system that implements a compatible front end.
+
+ The corresponding Linux frontend driver is enabled by the
+ CONFIG_XEN_NETDEV_FRONTEND configuration option.
+
+ The backend driver presents a standard network device
+ endpoint for each paravirtual network device to the driver
+ domain network stack. These can then be bridged or routed
+ etc in order to provide full network connectivity.
+
+ If you are compiling a kernel to run in a Xen network driver
+ domain (often this is domain 0) you should say Y here. To
+ compile this driver as a module, chose M here: the module
+ will be called xen-netback.
+
+config VMXNET3
+ tristate "VMware VMXNET3 ethernet driver"
+ depends on PCI && INET
+ help
+ This driver supports VMware's vmxnet3 virtual ethernet NIC.
+ To compile this driver as a module, choose M here: the
+ module will be called vmxnet3.
+
+source "drivers/net/hyperv/Kconfig"
+
+endif # NETDEVICES