Upgrade to 4.4.50-rt62

The current kernel is based on rt kernel v4.4.6-rt14. We will upgrade it
to 4.4.50-rt62.
The command to achieve it is:
a) Clone a git repo from
git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-stable-rt.git

b) Get the diff between this two changesets:
git diff 640eca2901f3435e616157b11379d3223a44b391
705619beeea1b0b48219a683fd1a901a86fdaf5e

where the two commits are:
[yjiang5@jnakajim-build linux-stable-rt]$ git show --oneline --name-only
640eca2901f3435e616157b11379d3223a44b391
640eca2901f3 v4.4.6-rt14
localversion-rt
[yjiang5@jnakajim-build linux-stable-rt]$ git show --oneline --name-only
705619beeea1b0b48219a683fd1a901a86fdaf5e
705619beeea1 Linux 4.4.50-rt62
localversion-rt

c) One patch has been backported thus revert the patch before applying.

 filterdiff -p1 -x scripts/package/Makefile
~/tmp/v4.4.6-rt14-4.4.50-rt62.diff  |patch -p1 --dry-run

Upstream status: backport

Change-Id: I244d57a32f6066e5a5b9915f9fbf99e7bbca6e01
Signed-off-by: Yunhong Jiang <yunhong.jiang@linux.intel.com>

4 files changed, 39 insertions, 12 deletions

diff --git a/kernel/drivers/mtd/nand/Kconfig b/kernel/drivers/mtd/nand/Kconfig
index 289664089..8f49f8aef 100644
--- a/kernel/drivers/mtd/nand/Kconfig
+++ b/kernel/drivers/mtd/nand/Kconfig
@@ -527,7 +527,7 @@ config MTD_NAND_FSMC
 	  Flexible Static Memory Controller (FSMC)
 
 config MTD_NAND_XWAY
-	tristate "Support for NAND on Lantiq XWAY SoC"
+	bool "Support for NAND on Lantiq XWAY SoC"
 	depends on LANTIQ && SOC_TYPE_XWAY
 	select MTD_NAND_PLATFORM
 	help
diff --git a/kernel/drivers/mtd/nand/brcmnand/brcmnand.c b/kernel/drivers/mtd/nand/brcmnand/brcmnand.c
index 12c6190c6..4a07ba119 100644
--- a/kernel/drivers/mtd/nand/brcmnand/brcmnand.c
+++ b/kernel/drivers/mtd/nand/brcmnand/brcmnand.c
@@ -309,6 +309,36 @@ static const u16 brcmnand_regs_v60[] = {
 	[BRCMNAND_FC_BASE]		= 0x400,
 };
 
+/* BRCMNAND v7.1 */
+static const u16 brcmnand_regs_v71[] = {
+	[BRCMNAND_CMD_START]		=  0x04,
+	[BRCMNAND_CMD_EXT_ADDRESS]	=  0x08,
+	[BRCMNAND_CMD_ADDRESS]		=  0x0c,
+	[BRCMNAND_INTFC_STATUS]		=  0x14,
+	[BRCMNAND_CS_SELECT]		=  0x18,
+	[BRCMNAND_CS_XOR]		=  0x1c,
+	[BRCMNAND_LL_OP]		=  0x20,
+	[BRCMNAND_CS0_BASE]		=  0x50,
+	[BRCMNAND_CS1_BASE]		=     0,
+	[BRCMNAND_CORR_THRESHOLD]	=  0xdc,
+	[BRCMNAND_CORR_THRESHOLD_EXT]	=  0xe0,
+	[BRCMNAND_UNCORR_COUNT]		=  0xfc,
+	[BRCMNAND_CORR_COUNT]		= 0x100,
+	[BRCMNAND_CORR_EXT_ADDR]	= 0x10c,
+	[BRCMNAND_CORR_ADDR]		= 0x110,
+	[BRCMNAND_UNCORR_EXT_ADDR]	= 0x114,
+	[BRCMNAND_UNCORR_ADDR]		= 0x118,
+	[BRCMNAND_SEMAPHORE]		= 0x150,
+	[BRCMNAND_ID]			= 0x194,
+	[BRCMNAND_ID_EXT]		= 0x198,
+	[BRCMNAND_LL_RDATA]		= 0x19c,
+	[BRCMNAND_OOB_READ_BASE]	= 0x200,
+	[BRCMNAND_OOB_READ_10_BASE]	=     0,
+	[BRCMNAND_OOB_WRITE_BASE]	= 0x280,
+	[BRCMNAND_OOB_WRITE_10_BASE]	=     0,
+	[BRCMNAND_FC_BASE]		= 0x400,
+};
+
 enum brcmnand_cs_reg {
 	BRCMNAND_CS_CFG_EXT = 0,
 	BRCMNAND_CS_CFG,
@@ -404,7 +434,9 @@ static int brcmnand_revision_init(struct brcmnand_controller *ctrl)
 	}
 
 	/* Register offsets */
-	if (ctrl->nand_version >= 0x0600)
+	if (ctrl->nand_version >= 0x0701)
+		ctrl->reg_offsets = brcmnand_regs_v71;
+	else if (ctrl->nand_version >= 0x0600)
 		ctrl->reg_offsets = brcmnand_regs_v60;
 	else if (ctrl->nand_version >= 0x0500)
 		ctrl->reg_offsets = brcmnand_regs_v50;
diff --git a/kernel/drivers/mtd/nand/davinci_nand.c b/kernel/drivers/mtd/nand/davinci_nand.c
index c72313d66..bc054a5ed 100644
--- a/kernel/drivers/mtd/nand/davinci_nand.c
+++ b/kernel/drivers/mtd/nand/davinci_nand.c
@@ -241,6 +241,9 @@ static void nand_davinci_hwctl_4bit(struct mtd_info *mtd, int mode)
 	unsigned long flags;
 	u32 val;
 
+	/* Reset ECC hardware */
+	davinci_nand_readl(info, NAND_4BIT_ECC1_OFFSET);
+
 	spin_lock_irqsave(&davinci_nand_lock, flags);
 
 	/* Start 4-bit ECC calculation for read/write */
diff --git a/kernel/drivers/mtd/nand/nand_base.c b/kernel/drivers/mtd/nand/nand_base.c
index 3ff583f16..54ab48827 100644
--- a/kernel/drivers/mtd/nand/nand_base.c
+++ b/kernel/drivers/mtd/nand/nand_base.c
@@ -2586,7 +2586,7 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
 		int cached = writelen > bytes && page != blockmask;
 		uint8_t *wbuf = buf;
 		int use_bufpoi;
-		int part_pagewr = (column || writelen < (mtd->writesize - 1));
+		int part_pagewr = (column || writelen < mtd->writesize);
 
 		if (part_pagewr)
 			use_bufpoi = 1;
@@ -3979,7 +3979,6 @@ static int nand_dt_init(struct mtd_info *mtd, struct nand_chip *chip,
  * This is the first phase of the normal nand_scan() function. It reads the
  * flash ID and sets up MTD fields accordingly.
  *
- * The mtd->owner field must be set to the module of the caller.
  */
 int nand_scan_ident(struct mtd_info *mtd, int maxchips,
 		    struct nand_flash_dev *table)
@@ -4403,19 +4402,12 @@ EXPORT_SYMBOL(nand_scan_tail);
  *
  * This fills out all the uninitialized function pointers with the defaults.
  * The flash ID is read and the mtd/chip structures are filled with the
- * appropriate values. The mtd->owner field must be set to the module of the
- * caller.
+ * appropriate values.
  */
 int nand_scan(struct mtd_info *mtd, int maxchips)
 {
 	int ret;
 
-	/* Many callers got this wrong, so check for it for a while... */
-	if (!mtd->owner && caller_is_module()) {
-		pr_crit("%s called with NULL mtd->owner!\n", __func__);
-		BUG();
-	}
-
 	ret = nand_scan_ident(mtd, maxchips, NULL);
 	if (!ret)
 		ret = nand_scan_tail(mtd);