These changes are the raw update to linux-4.4.6-rt14. Kernel sources

are taken from kernel.org, and rt patch from the rt wiki download page.

During the rebasing, the following patch collided:

Force tick interrupt and get rid of softirq magic(I70131fb85).

Collisions have been removed because its logic was found on the
source already.

Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>

12 files changed, 397 insertions, 76 deletions

diff --git a/kernel/drivers/mtd/devices/Kconfig b/kernel/drivers/mtd/devices/Kconfig
index c49d0b127..f73c41697 100644
--- a/kernel/drivers/mtd/devices/Kconfig
+++ b/kernel/drivers/mtd/devices/Kconfig
@@ -195,6 +195,14 @@ config MTD_BLOCK2MTD
 	  Testing MTD users (eg JFFS2) on large media and media that might
 	  be removed during a write (using the floppy drive).
 
+config MTD_POWERNV_FLASH
+	tristate "powernv flash MTD driver"
+	depends on PPC_POWERNV
+	help
+	  This provides an MTD device to access flash on powernv OPAL
+	  platforms from Linux. This device abstracts away the
+	  firmware interface for flash access.
+
 comment "Disk-On-Chip Device Drivers"
 
 config MTD_DOCG3
diff --git a/kernel/drivers/mtd/devices/Makefile b/kernel/drivers/mtd/devices/Makefile
index f0b0e611d..7912d3a0e 100644
--- a/kernel/drivers/mtd/devices/Makefile
+++ b/kernel/drivers/mtd/devices/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_MTD_SPEAR_SMI)	+= spear_smi.o
 obj-$(CONFIG_MTD_SST25L)	+= sst25l.o
 obj-$(CONFIG_MTD_BCM47XXSFLASH)	+= bcm47xxsflash.o
 obj-$(CONFIG_MTD_ST_SPI_FSM)    += st_spi_fsm.o
+obj-$(CONFIG_MTD_POWERNV_FLASH)	+= powernv_flash.o
 
 
 CFLAGS_docg3.o			+= -I$(src)
diff --git a/kernel/drivers/mtd/devices/bcm47xxsflash.c b/kernel/drivers/mtd/devices/bcm47xxsflash.c
index 3d008a941..347bb83db 100644
--- a/kernel/drivers/mtd/devices/bcm47xxsflash.c
+++ b/kernel/drivers/mtd/devices/bcm47xxsflash.c
@@ -237,13 +237,14 @@ static int bcm47xxsflash_write(struct mtd_info *mtd, loff_t to, size_t len,
 	return 0;
 }
 
-static void bcm47xxsflash_fill_mtd(struct bcm47xxsflash *b47s)
+static void bcm47xxsflash_fill_mtd(struct bcm47xxsflash *b47s,
+				   struct device *dev)
 {
 	struct mtd_info *mtd = &b47s->mtd;
 
 	mtd->priv = b47s;
+	mtd->dev.parent = dev;
 	mtd->name = "bcm47xxsflash";
-	mtd->owner = THIS_MODULE;
 
 	mtd->type = MTD_NORFLASH;
 	mtd->flags = MTD_CAP_NORFLASH;
@@ -300,7 +301,7 @@ static int bcm47xxsflash_bcma_probe(struct platform_device *pdev)
 	b47s->blocksize = sflash->blocksize;
 	b47s->numblocks = sflash->numblocks;
 	b47s->size = sflash->size;
-	bcm47xxsflash_fill_mtd(b47s);
+	bcm47xxsflash_fill_mtd(b47s, &pdev->dev);
 
 	err = mtd_device_parse_register(&b47s->mtd, probes, NULL, NULL, 0);
 	if (err) {
diff --git a/kernel/drivers/mtd/devices/block2mtd.c b/kernel/drivers/mtd/devices/block2mtd.c
index b16f3cda9..e2c005773 100644
--- a/kernel/drivers/mtd/devices/block2mtd.c
+++ b/kernel/drivers/mtd/devices/block2mtd.c
@@ -20,6 +20,7 @@
 #include <linux/delay.h>
 #include <linux/fs.h>
 #include <linux/blkdev.h>
+#include <linux/backing-dev.h>
 #include <linux/bio.h>
 #include <linux/pagemap.h>
 #include <linux/list.h>
diff --git a/kernel/drivers/mtd/devices/docg3.c b/kernel/drivers/mtd/devices/docg3.c
index 866d31904..c3a2695a4 100644
--- a/kernel/drivers/mtd/devices/docg3.c
+++ b/kernel/drivers/mtd/devices/docg3.c
@@ -1620,20 +1620,30 @@ static struct device_attribute doc_sys_attrs[DOC_MAX_NBFLOORS][4] = {
 static int doc_register_sysfs(struct platform_device *pdev,
 			      struct docg3_cascade *cascade)
 {
-	int ret = 0, floor, i = 0;
 	struct device *dev = &pdev->dev;
+	int floor;
+	int ret;
+	int i;
 
-	for (floor = 0; !ret && floor < DOC_MAX_NBFLOORS &&
-		     cascade->floors[floor]; floor++)
-		for (i = 0; !ret && i < 4; i++)
+	for (floor = 0;
+	     floor < DOC_MAX_NBFLOORS && cascade->floors[floor];
+	     floor++) {
+		for (i = 0; i < 4; i++) {
 			ret = device_create_file(dev, &doc_sys_attrs[floor][i]);
-	if (!ret)
-		return 0;
+			if (ret)
+				goto remove_files;
+		}
+	}
+
+	return 0;
+
+remove_files:
 	do {
 		while (--i >= 0)
 			device_remove_file(dev, &doc_sys_attrs[floor][i]);
 		i = 4;
 	} while (--floor >= 0);
+
 	return ret;
 }
 
@@ -1815,7 +1825,7 @@ static void doc_dbg_unregister(struct docg3 *docg3)
  * @chip_id: The chip ID of the supported chip
  * @mtd: The structure to fill
  */
-static void __init doc_set_driver_info(int chip_id, struct mtd_info *mtd)
+static int __init doc_set_driver_info(int chip_id, struct mtd_info *mtd)
 {
 	struct docg3 *docg3 = mtd->priv;
 	int cfg;
@@ -1828,6 +1838,8 @@ static void __init doc_set_driver_info(int chip_id, struct mtd_info *mtd)
 	case DOC_CHIPID_G3:
 		mtd->name = kasprintf(GFP_KERNEL, "docg3.%d",
 				      docg3->device_id);
+		if (!mtd->name)
+			return -ENOMEM;
 		docg3->max_block = 2047;
 		break;
 	}
@@ -1841,7 +1853,6 @@ static void __init doc_set_driver_info(int chip_id, struct mtd_info *mtd)
 		mtd->erasesize /= 2;
 	mtd->writebufsize = mtd->writesize = DOC_LAYOUT_PAGE_SIZE;
 	mtd->oobsize = DOC_LAYOUT_OOB_SIZE;
-	mtd->owner = THIS_MODULE;
 	mtd->_erase = doc_erase;
 	mtd->_read = doc_read;
 	mtd->_write = doc_write;
@@ -1850,6 +1861,8 @@ static void __init doc_set_driver_info(int chip_id, struct mtd_info *mtd)
 	mtd->_block_isbad = doc_block_isbad;
 	mtd->ecclayout = &docg3_oobinfo;
 	mtd->ecc_strength = DOC_ECC_BCH_T;
+
+	return 0;
 }
 
 /**
@@ -1881,6 +1894,7 @@ doc_probe_device(struct docg3_cascade *cascade, int floor, struct device *dev)
 	if (!mtd)
 		goto nomem2;
 	mtd->priv = docg3;
+	mtd->dev.parent = dev;
 	bbt_nbpages = DIV_ROUND_UP(docg3->max_block + 1,
 				   8 * DOC_LAYOUT_PAGE_SIZE);
 	docg3->bbt = kzalloc(bbt_nbpages * DOC_LAYOUT_PAGE_SIZE, GFP_KERNEL);
@@ -1900,7 +1914,7 @@ doc_probe_device(struct docg3_cascade *cascade, int floor, struct device *dev)
 
 	ret = 0;
 	if (chip_id != (u16)(~chip_id_inv)) {
-		goto nomem3;
+		goto nomem4;
 	}
 
 	switch (chip_id) {
@@ -1910,15 +1924,19 @@ doc_probe_device(struct docg3_cascade *cascade, int floor, struct device *dev)
 		break;
 	default:
 		doc_err("Chip id %04x is not a DiskOnChip G3 chip\n", chip_id);
-		goto nomem3;
+		goto nomem4;
 	}
 
-	doc_set_driver_info(chip_id, mtd);
+	ret = doc_set_driver_info(chip_id, mtd);
+	if (ret)
+		goto nomem4;
 
 	doc_hamming_ecc_init(docg3, DOC_LAYOUT_OOB_PAGEINFO_SZ);
 	doc_reload_bbt(docg3);
 	return mtd;
 
+nomem4:
+	kfree(docg3->bbt);
 nomem3:
 	kfree(mtd);
 nomem2:
@@ -2117,7 +2135,7 @@ static int docg3_release(struct platform_device *pdev)
 }
 
 #ifdef CONFIG_OF
-static struct of_device_id docg3_dt_ids[] = {
+static const struct of_device_id docg3_dt_ids[] = {
 	{ .compatible = "m-systems,diskonchip-g3" },
 	{}
 };
diff --git a/kernel/drivers/mtd/devices/m25p80.c b/kernel/drivers/mtd/devices/m25p80.c
index 3af137f49..fe9ceb7b5 100644
--- a/kernel/drivers/mtd/devices/m25p80.c
+++ b/kernel/drivers/mtd/devices/m25p80.c
@@ -31,7 +31,6 @@
 struct m25p {
 	struct spi_device	*spi;
 	struct spi_nor		spi_nor;
-	struct mtd_info		mtd;
 	u8			command[MAX_CMD_SIZE];
 };
 
@@ -62,8 +61,7 @@ static int m25p_cmdsz(struct spi_nor *nor)
 	return 1 + nor->addr_width;
 }
 
-static int m25p80_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len,
-			int wr_en)
+static int m25p80_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len)
 {
 	struct m25p *flash = nor->priv;
 	struct spi_device *spi = flash->spi;
@@ -159,7 +157,7 @@ static int m25p80_erase(struct spi_nor *nor, loff_t offset)
 	struct m25p *flash = nor->priv;
 
 	dev_dbg(nor->dev, "%dKiB at 0x%08x\n",
-		flash->mtd.erasesize / 1024, (u32)offset);
+		flash->spi_nor.mtd.erasesize / 1024, (u32)offset);
 
 	/* Set up command buffer. */
 	flash->command[0] = nor->erase_opcode;
@@ -201,11 +199,10 @@ static int m25p_probe(struct spi_device *spi)
 	nor->read_reg = m25p80_read_reg;
 
 	nor->dev = &spi->dev;
-	nor->mtd = &flash->mtd;
+	nor->flash_node = spi->dev.of_node;
 	nor->priv = flash;
 
 	spi_set_drvdata(spi, flash);
-	flash->mtd.priv = nor;
 	flash->spi = spi;
 
 	if (spi->mode & SPI_RX_QUAD)
@@ -214,7 +211,7 @@ static int m25p_probe(struct spi_device *spi)
 		mode = SPI_NOR_DUAL;
 
 	if (data && data->name)
-		flash->mtd.name = data->name;
+		nor->mtd.name = data->name;
 
 	/* For some (historical?) reason many platforms provide two different
 	 * names in flash_platform_data: "name" and "type". Quite often name is
@@ -223,8 +220,6 @@ static int m25p_probe(struct spi_device *spi)
 	 */
 	if (data && data->type)
 		flash_name = data->type;
-	else if (!strcmp(spi->modalias, "spi-nor"))
-		flash_name = NULL; /* auto-detect */
 	else
 		flash_name = spi->modalias;
 
@@ -234,7 +229,7 @@ static int m25p_probe(struct spi_device *spi)
 
 	ppdata.of_node = spi->dev.of_node;
 
-	return mtd_device_parse_register(&flash->mtd, NULL, &ppdata,
+	return mtd_device_parse_register(&nor->mtd, NULL, &ppdata,
 			data ? data->parts : NULL,
 			data ? data->nr_parts : 0);
 }
@@ -245,7 +240,7 @@ static int m25p_remove(struct spi_device *spi)
 	struct m25p	*flash = spi_get_drvdata(spi);
 
 	/* Clean up MTD stuff. */
-	return mtd_device_unregister(&flash->mtd);
+	return mtd_device_unregister(&flash->spi_nor.mtd);
 }
 
 /*
@@ -261,59 +256,52 @@ static int m25p_remove(struct spi_device *spi)
  * keep them available as module aliases for existing platforms.
  */
 static const struct spi_device_id m25p_ids[] = {
-	{"at25fs010"},	{"at25fs040"},	{"at25df041a"},	{"at25df321a"},
-	{"at25df641"},	{"at26f004"},	{"at26df081a"},	{"at26df161a"},
-	{"at26df321"},	{"at45db081d"},
-	{"en25f32"},	{"en25p32"},	{"en25q32b"},	{"en25p64"},
-	{"en25q64"},	{"en25qh128"},	{"en25qh256"},
-	{"f25l32pa"},
-	{"mr25h256"},	{"mr25h10"},
-	{"gd25q32"},	{"gd25q64"},
-	{"160s33b"},	{"320s33b"},	{"640s33b"},
-	{"mx25l2005a"},	{"mx25l4005a"},	{"mx25l8005"},	{"mx25l1606e"},
-	{"mx25l3205d"},	{"mx25l3255e"},	{"mx25l6405d"},	{"mx25l12805d"},
-	{"mx25l12855e"},{"mx25l25635e"},{"mx25l25655e"},{"mx66l51235l"},
-	{"mx66l1g55g"},
-	{"n25q064"},	{"n25q128a11"},	{"n25q128a13"},	{"n25q256a"},
-	{"n25q512a"},	{"n25q512ax3"},	{"n25q00"},
-	{"pm25lv512"},	{"pm25lv010"},	{"pm25lq032"},
-	{"s25sl032p"},	{"s25sl064p"},	{"s25fl256s0"},	{"s25fl256s1"},
-	{"s25fl512s"},	{"s70fl01gs"},	{"s25sl12800"},	{"s25sl12801"},
-	{"s25fl129p0"},	{"s25fl129p1"},	{"s25sl004a"},	{"s25sl008a"},
-	{"s25sl016a"},	{"s25sl032a"},	{"s25sl064a"},	{"s25fl008k"},
-	{"s25fl016k"},	{"s25fl064k"},	{"s25fl132k"},
-	{"sst25vf040b"},{"sst25vf080b"},{"sst25vf016b"},{"sst25vf032b"},
-	{"sst25vf064c"},{"sst25wf512"},	{"sst25wf010"},	{"sst25wf020"},
-	{"sst25wf040"},
-	{"m25p05"},	{"m25p10"},	{"m25p20"},	{"m25p40"},
-	{"m25p80"},	{"m25p16"},	{"m25p32"},	{"m25p64"},
-	{"m25p128"},	{"n25q032"},
+	/*
+	 * Entries not used in DTs that should be safe to drop after replacing
+	 * them with "nor-jedec" in platform data.
+	 */
+	{"s25sl064a"},	{"w25x16"},	{"m25p10"},	{"m25px64"},
+
+	/*
+	 * Entries that were used in DTs without "nor-jedec" fallback and should
+	 * be kept for backward compatibility.
+	 */
+	{"at25df321a"},	{"at25df641"},	{"at26df081a"},
+	{"mr25h256"},
+	{"mx25l4005a"},	{"mx25l1606e"},	{"mx25l6405d"},	{"mx25l12805d"},
+	{"mx25l25635e"},{"mx66l51235l"},
+	{"n25q064"},	{"n25q128a11"},	{"n25q128a13"},	{"n25q512a"},
+	{"s25fl256s1"},	{"s25fl512s"},	{"s25sl12801"},	{"s25fl008k"},
+	{"s25fl064k"},
+	{"sst25vf040b"},{"sst25vf016b"},{"sst25vf032b"},{"sst25wf040"},
+	{"m25p40"},	{"m25p80"},	{"m25p16"},	{"m25p32"},
+	{"m25p64"},	{"m25p128"},
+	{"w25x80"},	{"w25x32"},	{"w25q32"},	{"w25q32dw"},
+	{"w25q80bl"},	{"w25q128"},	{"w25q256"},
+
+	/* Flashes that can't be detected using JEDEC */
 	{"m25p05-nonjedec"},	{"m25p10-nonjedec"},	{"m25p20-nonjedec"},
 	{"m25p40-nonjedec"},	{"m25p80-nonjedec"},	{"m25p16-nonjedec"},
 	{"m25p32-nonjedec"},	{"m25p64-nonjedec"},	{"m25p128-nonjedec"},
-	{"m45pe10"},	{"m45pe80"},	{"m45pe16"},
-	{"m25pe20"},	{"m25pe80"},	{"m25pe16"},
-	{"m25px16"},	{"m25px32"},	{"m25px32-s0"},	{"m25px32-s1"},
-	{"m25px64"},	{"m25px80"},
-	{"w25x10"},	{"w25x20"},	{"w25x40"},	{"w25x80"},
-	{"w25x16"},	{"w25x32"},	{"w25q32"},	{"w25q32dw"},
-	{"w25x64"},	{"w25q64"},	{"w25q80"},	{"w25q80bl"},
-	{"w25q128"},	{"w25q256"},	{"cat25c11"},
-	{"cat25c03"},	{"cat25c09"},	{"cat25c17"},	{"cat25128"},
 
-	/*
-	 * Generic support for SPI NOR that can be identified by the JEDEC READ
-	 * ID opcode (0x9F). Use this, if possible.
-	 */
-	{"spi-nor"},
 	{ },
 };
 MODULE_DEVICE_TABLE(spi, m25p_ids);
 
+static const struct of_device_id m25p_of_table[] = {
+	/*
+	 * Generic compatibility for SPI NOR that can be identified by the
+	 * JEDEC READ ID opcode (0x9F). Use this, if possible.
+	 */
+	{ .compatible = "jedec,spi-nor" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, m25p_of_table);
+
 static struct spi_driver m25p80_driver = {
 	.driver = {
 		.name	= "m25p80",
-		.owner	= THIS_MODULE,
+		.of_match_table = m25p_of_table,
 	},
 	.id_table	= m25p_ids,
 	.probe	= m25p_probe,
diff --git a/kernel/drivers/mtd/devices/mtd_dataflash.c b/kernel/drivers/mtd/devices/mtd_dataflash.c
index 0099aba72..e4a88715a 100644
--- a/kernel/drivers/mtd/devices/mtd_dataflash.c
+++ b/kernel/drivers/mtd/devices/mtd_dataflash.c
@@ -102,6 +102,7 @@ static const struct of_device_id dataflash_dt_ids[] = {
 	{ .compatible = "atmel,dataflash", },
 	{ /* sentinel */ }
 };
+MODULE_DEVICE_TABLE(of, dataflash_dt_ids);
 #endif
 
 /* ......................................................................... */
@@ -647,7 +648,6 @@ static int add_dataflash_otp(struct spi_device *spi, char *name, int nr_pages,
 	device->size = nr_pages * pagesize;
 	device->erasesize = pagesize;
 	device->writesize = pagesize;
-	device->owner = THIS_MODULE;
 	device->type = MTD_DATAFLASH;
 	device->flags = MTD_WRITEABLE;
 	device->_erase = dataflash_erase;
@@ -910,7 +910,6 @@ static int dataflash_remove(struct spi_device *spi)
 static struct spi_driver dataflash_driver = {
 	.driver = {
 		.name		= "mtd_dataflash",
-		.owner		= THIS_MODULE,
 		.of_match_table = of_match_ptr(dataflash_dt_ids),
 	},
 
diff --git a/kernel/drivers/mtd/devices/mtdram.c b/kernel/drivers/mtd/devices/mtdram.c
index 8e2850892..627a9bc37 100644
--- a/kernel/drivers/mtd/devices/mtdram.c
+++ b/kernel/drivers/mtd/devices/mtdram.c
@@ -32,8 +32,29 @@ MODULE_PARM_DESC(erase_size, "Device erase block size in KiB");
 // We could store these in the mtd structure, but we only support 1 device..
 static struct mtd_info *mtd_info;
 
+static int check_offs_len(struct mtd_info *mtd, loff_t ofs, uint64_t len)
+{
+	int ret = 0;
+
+	/* Start address must align on block boundary */
+	if (mtd_mod_by_eb(ofs, mtd)) {
+		pr_debug("%s: unaligned address\n", __func__);
+		ret = -EINVAL;
+	}
+
+	/* Length must align on block boundary */
+	if (mtd_mod_by_eb(len, mtd)) {
+		pr_debug("%s: length not block aligned\n", __func__);
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
 static int ram_erase(struct mtd_info *mtd, struct erase_info *instr)
 {
+	if (check_offs_len(mtd, instr->addr, instr->len))
+		return -EINVAL;
 	memset((char *)mtd->priv + instr->addr, 0xff, instr->len);
 	instr->state = MTD_ERASE_DONE;
 	mtd_erase_callback(instr);
diff --git a/kernel/drivers/mtd/devices/powernv_flash.c b/kernel/drivers/mtd/devices/powernv_flash.c
new file mode 100644
index 000000000..d5b870b3f
--- /dev/null
+++ b/kernel/drivers/mtd/devices/powernv_flash.c
@@ -0,0 +1,285 @@
+/*
+ * OPAL PNOR flash MTD abstraction
+ *
+ * Copyright IBM 2015
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+
+#include <asm/opal.h>
+
+
+/*
+ * This driver creates the a Linux MTD abstraction for platform PNOR flash
+ * backed by OPAL calls
+ */
+
+struct powernv_flash {
+	struct mtd_info	mtd;
+	u32 id;
+};
+
+enum flash_op {
+	FLASH_OP_READ,
+	FLASH_OP_WRITE,
+	FLASH_OP_ERASE,
+};
+
+static int powernv_flash_async_op(struct mtd_info *mtd, enum flash_op op,
+		loff_t offset, size_t len, size_t *retlen, u_char *buf)
+{
+	struct powernv_flash *info = (struct powernv_flash *)mtd->priv;
+	struct device *dev = &mtd->dev;
+	int token;
+	struct opal_msg msg;
+	int rc;
+
+	dev_dbg(dev, "%s(op=%d, offset=0x%llx, len=%zu)\n",
+			__func__, op, offset, len);
+
+	token = opal_async_get_token_interruptible();
+	if (token < 0) {
+		if (token != -ERESTARTSYS)
+			dev_err(dev, "Failed to get an async token\n");
+
+		return token;
+	}
+
+	switch (op) {
+	case FLASH_OP_READ:
+		rc = opal_flash_read(info->id, offset, __pa(buf), len, token);
+		break;
+	case FLASH_OP_WRITE:
+		rc = opal_flash_write(info->id, offset, __pa(buf), len, token);
+		break;
+	case FLASH_OP_ERASE:
+		rc = opal_flash_erase(info->id, offset, len, token);
+		break;
+	default:
+		BUG_ON(1);
+	}
+
+	if (rc != OPAL_ASYNC_COMPLETION) {
+		dev_err(dev, "opal_flash_async_op(op=%d) failed (rc %d)\n",
+				op, rc);
+		opal_async_release_token(token);
+		return -EIO;
+	}
+
+	rc = opal_async_wait_response(token, &msg);
+	opal_async_release_token(token);
+	if (rc) {
+		dev_err(dev, "opal async wait failed (rc %d)\n", rc);
+		return -EIO;
+	}
+
+	rc = be64_to_cpu(msg.params[1]);
+	if (rc == OPAL_SUCCESS) {
+		rc = 0;
+		if (retlen)
+			*retlen = len;
+	} else {
+		rc = -EIO;
+	}
+
+	return rc;
+}
+
+/**
+ * @mtd: the device
+ * @from: the offset to read from
+ * @len: the number of bytes to read
+ * @retlen: the number of bytes actually read
+ * @buf: the filled in buffer
+ *
+ * Returns 0 if read successful, or -ERRNO if an error occurred
+ */
+static int powernv_flash_read(struct mtd_info *mtd, loff_t from, size_t len,
+	     size_t *retlen, u_char *buf)
+{
+	return powernv_flash_async_op(mtd, FLASH_OP_READ, from,
+			len, retlen, buf);
+}
+
+/**
+ * @mtd: the device
+ * @to: the offset to write to
+ * @len: the number of bytes to write
+ * @retlen: the number of bytes actually written
+ * @buf: the buffer to get bytes from
+ *
+ * Returns 0 if write successful, -ERRNO if error occurred
+ */
+static int powernv_flash_write(struct mtd_info *mtd, loff_t to, size_t len,
+		     size_t *retlen, const u_char *buf)
+{
+	return powernv_flash_async_op(mtd, FLASH_OP_WRITE, to,
+			len, retlen, (u_char *)buf);
+}
+
+/**
+ * @mtd: the device
+ * @erase: the erase info
+ * Returns 0 if erase successful or -ERRNO if an error occurred
+ */
+static int powernv_flash_erase(struct mtd_info *mtd, struct erase_info *erase)
+{
+	int rc;
+
+	erase->state = MTD_ERASING;
+
+	/* todo: register our own notifier to do a true async implementation */
+	rc =  powernv_flash_async_op(mtd, FLASH_OP_ERASE, erase->addr,
+			erase->len, NULL, NULL);
+
+	if (rc) {
+		erase->fail_addr = erase->addr;
+		erase->state = MTD_ERASE_FAILED;
+	} else {
+		erase->state = MTD_ERASE_DONE;
+	}
+	mtd_erase_callback(erase);
+	return rc;
+}
+
+/**
+ * powernv_flash_set_driver_info - Fill the mtd_info structure and docg3
+ * structure @pdev: The platform device
+ * @mtd: The structure to fill
+ */
+static int powernv_flash_set_driver_info(struct device *dev,
+		struct mtd_info *mtd)
+{
+	u64 size;
+	u32 erase_size;
+	int rc;
+
+	rc = of_property_read_u32(dev->of_node, "ibm,flash-block-size",
+			&erase_size);
+	if (rc) {
+		dev_err(dev, "couldn't get resource block size information\n");
+		return rc;
+	}
+
+	rc = of_property_read_u64(dev->of_node, "reg", &size);
+	if (rc) {
+		dev_err(dev, "couldn't get resource size information\n");
+		return rc;
+	}
+
+	/*
+	 * Going to have to check what details I need to set and how to
+	 * get them
+	 */
+	mtd->name = of_get_property(dev->of_node, "name", NULL);
+	mtd->type = MTD_NORFLASH;
+	mtd->flags = MTD_WRITEABLE;
+	mtd->size = size;
+	mtd->erasesize = erase_size;
+	mtd->writebufsize = mtd->writesize = 1;
+	mtd->owner = THIS_MODULE;
+	mtd->_erase = powernv_flash_erase;
+	mtd->_read = powernv_flash_read;
+	mtd->_write = powernv_flash_write;
+	mtd->dev.parent = dev;
+	return 0;
+}
+
+/**
+ * powernv_flash_probe
+ * @pdev: platform device
+ *
+ * Returns 0 on success, -ENOMEM, -ENXIO on error
+ */
+static int powernv_flash_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct powernv_flash *data;
+	int ret;
+
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data) {
+		ret = -ENOMEM;
+		goto out;
+	}
+	data->mtd.priv = data;
+
+	ret = of_property_read_u32(dev->of_node, "ibm,opal-id", &(data->id));
+	if (ret) {
+		dev_err(dev, "no device property 'ibm,opal-id'\n");
+		goto out;
+	}
+
+	ret = powernv_flash_set_driver_info(dev, &data->mtd);
+	if (ret)
+		goto out;
+
+	dev_set_drvdata(dev, data);
+
+	/*
+	 * The current flash that skiboot exposes is one contiguous flash chip
+	 * with an ffs partition at the start, it should prove easier for users
+	 * to deal with partitions or not as they see fit
+	 */
+	ret = mtd_device_register(&data->mtd, NULL, 0);
+
+out:
+	return ret;
+}
+
+/**
+ * op_release - Release the driver
+ * @pdev: the platform device
+ *
+ * Returns 0
+ */
+static int powernv_flash_release(struct platform_device *pdev)
+{
+	struct powernv_flash *data = dev_get_drvdata(&(pdev->dev));
+
+	/* All resources should be freed automatically */
+	return mtd_device_unregister(&(data->mtd));
+}
+
+static const struct of_device_id powernv_flash_match[] = {
+	{ .compatible = "ibm,opal-flash" },
+	{}
+};
+
+static struct platform_driver powernv_flash_driver = {
+	.driver		= {
+		.name		= "powernv_flash",
+		.of_match_table	= powernv_flash_match,
+	},
+	.remove		= powernv_flash_release,
+	.probe		= powernv_flash_probe,
+};
+
+module_platform_driver(powernv_flash_driver);
+
+MODULE_DEVICE_TABLE(of, powernv_flash_match);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Cyril Bur <cyril.bur@au1.ibm.com>");
+MODULE_DESCRIPTION("MTD abstraction for OPAL flash");
diff --git a/kernel/drivers/mtd/devices/slram.c b/kernel/drivers/mtd/devices/slram.c
index 2fc4957cb..a70eb83e6 100644
--- a/kernel/drivers/mtd/devices/slram.c
+++ b/kernel/drivers/mtd/devices/slram.c
@@ -41,7 +41,7 @@
 #include <linux/fs.h>
 #include <linux/ioctl.h>
 #include <linux/init.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 #include <linux/mtd/mtd.h>
 
diff --git a/kernel/drivers/mtd/devices/spear_smi.c b/kernel/drivers/mtd/devices/spear_smi.c
index 508bab3bd..64c745834 100644
--- a/kernel/drivers/mtd/devices/spear_smi.c
+++ b/kernel/drivers/mtd/devices/spear_smi.c
@@ -1,8 +1,8 @@
 /*
  * SMI (Serial Memory Controller) device driver for Serial NOR Flash on
  * SPEAr platform
- * The serial nor interface is largely based on drivers/mtd/m25p80.c,
- * however the SPI interface has been replaced by SMI.
+ * The serial nor interface is largely based on m25p80.c, however the SPI
+ * interface has been replaced by SMI.
  *
  * Copyright © 2010 STMicroelectronics.
  * Ashish Priyadarshi
@@ -854,6 +854,7 @@ static int spear_smi_setup_banks(struct platform_device *pdev,
 	else
 		flash->mtd.name = flash_devices[flash_index].name;
 
+	flash->mtd.dev.parent = &pdev->dev;
 	flash->mtd.type = MTD_NORFLASH;
 	flash->mtd.writesize = 1;
 	flash->mtd.flags = MTD_CAP_NORFLASH;
diff --git a/kernel/drivers/mtd/devices/sst25l.c b/kernel/drivers/mtd/devices/sst25l.c
index c63ecbcad..5b84d71ef 100644
--- a/kernel/drivers/mtd/devices/sst25l.c
+++ b/kernel/drivers/mtd/devices/sst25l.c
@@ -374,9 +374,8 @@ static int sst25l_probe(struct spi_device *spi)
 	data = dev_get_platdata(&spi->dev);
 	if (data && data->name)
 		flash->mtd.name = data->name;
-	else
-		flash->mtd.name = dev_name(&spi->dev);
 
+	flash->mtd.dev.parent   = &spi->dev;
 	flash->mtd.type		= MTD_NORFLASH;
 	flash->mtd.flags	= MTD_CAP_NORFLASH;
 	flash->mtd.erasesize	= flash_info->erase_size;
@@ -417,7 +416,6 @@ static int sst25l_remove(struct spi_device *spi)
 static struct spi_driver sst25l_driver = {
 	.driver = {
 		.name	= "sst25l",
-		.owner	= THIS_MODULE,
 	},
 	.probe		= sst25l_probe,
 	.remove		= sst25l_remove,