These changes are the raw update to linux-4.4.6-rt14. Kernel sources

are taken from kernel.org, and rt patch from the rt wiki download page.

During the rebasing, the following patch collided:

Force tick interrupt and get rid of softirq magic(I70131fb85).

Collisions have been removed because its logic was found on the
source already.

Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>

1 files changed, 16 insertions, 7 deletions

diff --git a/kernel/drivers/mmc/host/sdhci.h b/kernel/drivers/mmc/host/sdhci.h
index e639b7f43..9c331ac5a 100644
--- a/kernel/drivers/mmc/host/sdhci.h
+++ b/kernel/drivers/mmc/host/sdhci.h
@@ -309,9 +309,10 @@ struct sdhci_adma2_64_desc {
  */
 #define SDHCI_MAX_SEGS		128
 
-struct sdhci_host_next {
-	unsigned int	sg_count;
-	s32		cookie;
+enum sdhci_cookie {
+	COOKIE_UNMAPPED,
+	COOKIE_MAPPED,
+	COOKIE_GIVEN,
 };
 
 struct sdhci_host {
@@ -409,6 +410,13 @@ struct sdhci_host {
 #define SDHCI_QUIRK2_SUPPORT_SINGLE			(1<<13)
 /* Controller broken with using ACMD23 */
 #define SDHCI_QUIRK2_ACMD23_BROKEN			(1<<14)
+/* Broken Clock divider zero in controller */
+#define SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN		(1<<15)
+/*
+ * When internal clock is disabled, a delay is needed before modifying the
+ * SD clock frequency or enabling back the internal clock.
+ */
+#define SDHCI_QUIRK2_NEED_DELAY_AFTER_INT_CLK_RST	(1<<16)
 
 	int irq;		/* Device IRQ */
 	void __iomem *ioaddr;	/* Mapped address */
@@ -417,6 +425,7 @@ struct sdhci_host {
 
 	/* Internal data */
 	struct mmc_host *mmc;	/* MMC structure */
+	struct mmc_host_ops mmc_host_ops;	/* MMC host ops */
 	u64 dma_mask;		/* custom DMA mask */
 
 #if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
@@ -432,13 +441,11 @@ struct sdhci_host {
 #define SDHCI_REQ_USE_DMA	(1<<2)	/* Use DMA for this req. */
 #define SDHCI_DEVICE_DEAD	(1<<3)	/* Device unresponsive */
 #define SDHCI_SDR50_NEEDS_TUNING (1<<4)	/* SDR50 needs tuning */
-#define SDHCI_NEEDS_RETUNING	(1<<5)	/* Host needs retuning */
 #define SDHCI_AUTO_CMD12	(1<<6)	/* Auto CMD12 support */
 #define SDHCI_AUTO_CMD23	(1<<7)	/* Auto CMD23 support */
 #define SDHCI_PV_ENABLED	(1<<8)	/* Preset value enabled */
 #define SDHCI_SDIO_IRQ_ENABLED	(1<<9)	/* SDIO irq enabled */
 #define SDHCI_SDR104_NEEDS_TUNING (1<<10)	/* SDR104/HS200 needs tuning */
-#define SDHCI_USING_RETUNING_TIMER (1<<11)	/* Host is using a retuning timer for the card */
 #define SDHCI_USE_64_BIT_DMA	(1<<12)	/* Use 64-bit DMA */
 #define SDHCI_HS400_TUNING	(1<<13)	/* Tuning for HS400 */
 
@@ -504,9 +511,7 @@ struct sdhci_host {
 	unsigned int		tuning_count;	/* Timer count for re-tuning */
 	unsigned int		tuning_mode;	/* Re-tuning mode supported by host */
 #define SDHCI_TUNING_MODE_1	0
-	struct timer_list	tuning_timer;	/* Timer for tuning */
 
-	struct sdhci_host_next	next_data;
 	unsigned long private[0] ____cacheline_aligned;
 };
 
@@ -541,6 +546,10 @@ struct sdhci_ops {
 	void	(*platform_init)(struct sdhci_host *host);
 	void    (*card_event)(struct sdhci_host *host);
 	void	(*voltage_switch)(struct sdhci_host *host);
+	int	(*select_drive_strength)(struct sdhci_host *host,
+					 struct mmc_card *card,
+					 unsigned int max_dtr, int host_drv,
+					 int card_drv, int *drv_type);
 };
 
 #ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS