These changes are the raw update to linux-4.4.6-rt14. Kernel sources

are taken from kernel.org, and rt patch from the rt wiki download page.

During the rebasing, the following patch collided:

Force tick interrupt and get rid of softirq magic(I70131fb85).

Collisions have been removed because its logic was found on the
source already.

Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>

1 files changed, 361 insertions, 111 deletions

diff --git a/kernel/drivers/mmc/host/sdhci-of-esdhc.c b/kernel/drivers/mmc/host/sdhci-of-esdhc.c
index 22e9111b1..90e94a028 100644
--- a/kernel/drivers/mmc/host/sdhci-of-esdhc.c
+++ b/kernel/drivers/mmc/host/sdhci-of-esdhc.c
@@ -24,122 +24,324 @@
 
 #define VENDOR_V_22	0x12
 #define VENDOR_V_23	0x13
-static u32 esdhc_readl(struct sdhci_host *host, int reg)
+
+struct sdhci_esdhc {
+	u8 vendor_ver;
+	u8 spec_ver;
+};
+
+/**
+ * esdhc_read*_fixup - Fixup the value read from incompatible eSDHC register
+ *		       to make it compatible with SD spec.
+ *
+ * @host: pointer to sdhci_host
+ * @spec_reg: SD spec register address
+ * @value: 32bit eSDHC register value on spec_reg address
+ *
+ * In SD spec, there are 8/16/32/64 bits registers, while all of eSDHC
+ * registers are 32 bits. There are differences in register size, register
+ * address, register function, bit position and function between eSDHC spec
+ * and SD spec.
+ *
+ * Return a fixed up register value
+ */
+static u32 esdhc_readl_fixup(struct sdhci_host *host,
+				     int spec_reg, u32 value)
 {
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_esdhc *esdhc = pltfm_host->priv;
 	u32 ret;
 
-	ret = in_be32(host->ioaddr + reg);
 	/*
 	 * The bit of ADMA flag in eSDHC is not compatible with standard
 	 * SDHC register, so set fake flag SDHCI_CAN_DO_ADMA2 when ADMA is
 	 * supported by eSDHC.
 	 * And for many FSL eSDHC controller, the reset value of field
-	 * SDHCI_CAN_DO_ADMA1 is one, but some of them can't support ADMA,
+	 * SDHCI_CAN_DO_ADMA1 is 1, but some of them can't support ADMA,
 	 * only these vendor version is greater than 2.2/0x12 support ADMA.
-	 * For FSL eSDHC, must aligned 4-byte, so use 0xFC to read the
-	 * the verdor version number, oxFE is SDHCI_HOST_VERSION.
 	 */
-	if ((reg == SDHCI_CAPABILITIES) && (ret & SDHCI_CAN_DO_ADMA1)) {
-		u32 tmp = in_be32(host->ioaddr + SDHCI_SLOT_INT_STATUS);
-		tmp = (tmp & SDHCI_VENDOR_VER_MASK) >> SDHCI_VENDOR_VER_SHIFT;
-		if (tmp > VENDOR_V_22)
-			ret |= SDHCI_CAN_DO_ADMA2;
+	if ((spec_reg == SDHCI_CAPABILITIES) && (value & SDHCI_CAN_DO_ADMA1)) {
+		if (esdhc->vendor_ver > VENDOR_V_22) {
+			ret = value | SDHCI_CAN_DO_ADMA2;
+			return ret;
+		}
 	}
-
+	ret = value;
 	return ret;
 }
 
-static u16 esdhc_readw(struct sdhci_host *host, int reg)
+static u16 esdhc_readw_fixup(struct sdhci_host *host,
+				     int spec_reg, u32 value)
 {
 	u16 ret;
-	int base = reg & ~0x3;
-	int shift = (reg & 0x2) * 8;
+	int shift = (spec_reg & 0x2) * 8;
 
-	if (unlikely(reg == SDHCI_HOST_VERSION))
-		ret = in_be32(host->ioaddr + base) & 0xffff;
+	if (spec_reg == SDHCI_HOST_VERSION)
+		ret = value & 0xffff;
 	else
-		ret = (in_be32(host->ioaddr + base) >> shift) & 0xffff;
+		ret = (value >> shift) & 0xffff;
 	return ret;
 }
 
-static u8 esdhc_readb(struct sdhci_host *host, int reg)
+static u8 esdhc_readb_fixup(struct sdhci_host *host,
+				     int spec_reg, u32 value)
 {
-	int base = reg & ~0x3;
-	int shift = (reg & 0x3) * 8;
-	u8 ret = (in_be32(host->ioaddr + base) >> shift) & 0xff;
+	u8 ret;
+	u8 dma_bits;
+	int shift = (spec_reg & 0x3) * 8;
+
+	ret = (value >> shift) & 0xff;
 
 	/*
 	 * "DMA select" locates at offset 0x28 in SD specification, but on
 	 * P5020 or P3041, it locates at 0x29.
 	 */
-	if (reg == SDHCI_HOST_CONTROL) {
-		u32 dma_bits;
-
-		dma_bits = in_be32(host->ioaddr + reg);
+	if (spec_reg == SDHCI_HOST_CONTROL) {
 		/* DMA select is 22,23 bits in Protocol Control Register */
-		dma_bits = (dma_bits >> 5) & SDHCI_CTRL_DMA_MASK;
-
+		dma_bits = (value >> 5) & SDHCI_CTRL_DMA_MASK;
 		/* fixup the result */
 		ret &= ~SDHCI_CTRL_DMA_MASK;
 		ret |= dma_bits;
 	}
-
 	return ret;
 }
 
-static void esdhc_writel(struct sdhci_host *host, u32 val, int reg)
+/**
+ * esdhc_write*_fixup - Fixup the SD spec register value so that it could be
+ *			written into eSDHC register.
+ *
+ * @host: pointer to sdhci_host
+ * @spec_reg: SD spec register address
+ * @value: 8/16/32bit SD spec register value that would be written
+ * @old_value: 32bit eSDHC register value on spec_reg address
+ *
+ * In SD spec, there are 8/16/32/64 bits registers, while all of eSDHC
+ * registers are 32 bits. There are differences in register size, register
+ * address, register function, bit position and function between eSDHC spec
+ * and SD spec.
+ *
+ * Return a fixed up register value
+ */
+static u32 esdhc_writel_fixup(struct sdhci_host *host,
+				     int spec_reg, u32 value, u32 old_value)
 {
+	u32 ret;
+
 	/*
-	 * Enable IRQSTATEN[BGESEN] is just to set IRQSTAT[BGE]
-	 * when SYSCTL[RSTD]) is set for some special operations.
-	 * No any impact other operation.
+	 * Enabling IRQSTATEN[BGESEN] is just to set IRQSTAT[BGE]
+	 * when SYSCTL[RSTD] is set for some special operations.
+	 * No any impact on other operation.
 	 */
-	if (reg == SDHCI_INT_ENABLE)
-		val |= SDHCI_INT_BLK_GAP;
-	sdhci_be32bs_writel(host, val, reg);
+	if (spec_reg == SDHCI_INT_ENABLE)
+		ret = value | SDHCI_INT_BLK_GAP;
+	else
+		ret = value;
+
+	return ret;
 }
 
-static void esdhc_writew(struct sdhci_host *host, u16 val, int reg)
+static u32 esdhc_writew_fixup(struct sdhci_host *host,
+				     int spec_reg, u16 value, u32 old_value)
 {
-	if (reg == SDHCI_BLOCK_SIZE) {
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	int shift = (spec_reg & 0x2) * 8;
+	u32 ret;
+
+	switch (spec_reg) {
+	case SDHCI_TRANSFER_MODE:
+		/*
+		 * Postpone this write, we must do it together with a
+		 * command write that is down below. Return old value.
+		 */
+		pltfm_host->xfer_mode_shadow = value;
+		return old_value;
+	case SDHCI_COMMAND:
+		ret = (value << 16) | pltfm_host->xfer_mode_shadow;
+		return ret;
+	}
+
+	ret = old_value & (~(0xffff << shift));
+	ret |= (value << shift);
+
+	if (spec_reg == SDHCI_BLOCK_SIZE) {
 		/*
 		 * Two last DMA bits are reserved, and first one is used for
 		 * non-standard blksz of 4096 bytes that we don't support
 		 * yet. So clear the DMA boundary bits.
 		 */
-		val &= ~SDHCI_MAKE_BLKSZ(0x7, 0);
+		ret &= (~SDHCI_MAKE_BLKSZ(0x7, 0));
 	}
-	sdhci_be32bs_writew(host, val, reg);
+	return ret;
 }
 
-static void esdhc_writeb(struct sdhci_host *host, u8 val, int reg)
+static u32 esdhc_writeb_fixup(struct sdhci_host *host,
+				     int spec_reg, u8 value, u32 old_value)
 {
+	u32 ret;
+	u32 dma_bits;
+	u8 tmp;
+	int shift = (spec_reg & 0x3) * 8;
+
+	/*
+	 * eSDHC doesn't have a standard power control register, so we do
+	 * nothing here to avoid incorrect operation.
+	 */
+	if (spec_reg == SDHCI_POWER_CONTROL)
+		return old_value;
 	/*
 	 * "DMA select" location is offset 0x28 in SD specification, but on
 	 * P5020 or P3041, it's located at 0x29.
 	 */
-	if (reg == SDHCI_HOST_CONTROL) {
-		u32 dma_bits;
-
+	if (spec_reg == SDHCI_HOST_CONTROL) {
 		/*
 		 * If host control register is not standard, exit
 		 * this function
 		 */
 		if (host->quirks2 & SDHCI_QUIRK2_BROKEN_HOST_CONTROL)
-			return;
+			return old_value;
 
 		/* DMA select is 22,23 bits in Protocol Control Register */
-		dma_bits = (val & SDHCI_CTRL_DMA_MASK) << 5;
-		clrsetbits_be32(host->ioaddr + reg , SDHCI_CTRL_DMA_MASK << 5,
-			dma_bits);
-		val &= ~SDHCI_CTRL_DMA_MASK;
-		val |= in_be32(host->ioaddr + reg) & SDHCI_CTRL_DMA_MASK;
+		dma_bits = (value & SDHCI_CTRL_DMA_MASK) << 5;
+		ret = (old_value & (~(SDHCI_CTRL_DMA_MASK << 5))) | dma_bits;
+		tmp = (value & (~SDHCI_CTRL_DMA_MASK)) |
+		      (old_value & SDHCI_CTRL_DMA_MASK);
+		ret = (ret & (~0xff)) | tmp;
+
+		/* Prevent SDHCI core from writing reserved bits (e.g. HISPD) */
+		ret &= ~ESDHC_HOST_CONTROL_RES;
+		return ret;
 	}
 
-	/* Prevent SDHCI core from writing reserved bits (e.g. HISPD). */
-	if (reg == SDHCI_HOST_CONTROL)
-		val &= ~ESDHC_HOST_CONTROL_RES;
-	sdhci_be32bs_writeb(host, val, reg);
+	ret = (old_value & (~(0xff << shift))) | (value << shift);
+	return ret;
+}
+
+static u32 esdhc_be_readl(struct sdhci_host *host, int reg)
+{
+	u32 ret;
+	u32 value;
+
+	value = ioread32be(host->ioaddr + reg);
+	ret = esdhc_readl_fixup(host, reg, value);
+
+	return ret;
+}
+
+static u32 esdhc_le_readl(struct sdhci_host *host, int reg)
+{
+	u32 ret;
+	u32 value;
+
+	value = ioread32(host->ioaddr + reg);
+	ret = esdhc_readl_fixup(host, reg, value);
+
+	return ret;
+}
+
+static u16 esdhc_be_readw(struct sdhci_host *host, int reg)
+{
+	u16 ret;
+	u32 value;
+	int base = reg & ~0x3;
+
+	value = ioread32be(host->ioaddr + base);
+	ret = esdhc_readw_fixup(host, reg, value);
+	return ret;
+}
+
+static u16 esdhc_le_readw(struct sdhci_host *host, int reg)
+{
+	u16 ret;
+	u32 value;
+	int base = reg & ~0x3;
+
+	value = ioread32(host->ioaddr + base);
+	ret = esdhc_readw_fixup(host, reg, value);
+	return ret;
+}
+
+static u8 esdhc_be_readb(struct sdhci_host *host, int reg)
+{
+	u8 ret;
+	u32 value;
+	int base = reg & ~0x3;
+
+	value = ioread32be(host->ioaddr + base);
+	ret = esdhc_readb_fixup(host, reg, value);
+	return ret;
+}
+
+static u8 esdhc_le_readb(struct sdhci_host *host, int reg)
+{
+	u8 ret;
+	u32 value;
+	int base = reg & ~0x3;
+
+	value = ioread32(host->ioaddr + base);
+	ret = esdhc_readb_fixup(host, reg, value);
+	return ret;
+}
+
+static void esdhc_be_writel(struct sdhci_host *host, u32 val, int reg)
+{
+	u32 value;
+
+	value = esdhc_writel_fixup(host, reg, val, 0);
+	iowrite32be(value, host->ioaddr + reg);
+}
+
+static void esdhc_le_writel(struct sdhci_host *host, u32 val, int reg)
+{
+	u32 value;
+
+	value = esdhc_writel_fixup(host, reg, val, 0);
+	iowrite32(value, host->ioaddr + reg);
+}
+
+static void esdhc_be_writew(struct sdhci_host *host, u16 val, int reg)
+{
+	int base = reg & ~0x3;
+	u32 value;
+	u32 ret;
+
+	value = ioread32be(host->ioaddr + base);
+	ret = esdhc_writew_fixup(host, reg, val, value);
+	if (reg != SDHCI_TRANSFER_MODE)
+		iowrite32be(ret, host->ioaddr + base);
+}
+
+static void esdhc_le_writew(struct sdhci_host *host, u16 val, int reg)
+{
+	int base = reg & ~0x3;
+	u32 value;
+	u32 ret;
+
+	value = ioread32(host->ioaddr + base);
+	ret = esdhc_writew_fixup(host, reg, val, value);
+	if (reg != SDHCI_TRANSFER_MODE)
+		iowrite32(ret, host->ioaddr + base);
+}
+
+static void esdhc_be_writeb(struct sdhci_host *host, u8 val, int reg)
+{
+	int base = reg & ~0x3;
+	u32 value;
+	u32 ret;
+
+	value = ioread32be(host->ioaddr + base);
+	ret = esdhc_writeb_fixup(host, reg, val, value);
+	iowrite32be(ret, host->ioaddr + base);
+}
+
+static void esdhc_le_writeb(struct sdhci_host *host, u8 val, int reg)
+{
+	int base = reg & ~0x3;
+	u32 value;
+	u32 ret;
+
+	value = ioread32(host->ioaddr + base);
+	ret = esdhc_writeb_fixup(host, reg, val, value);
+	iowrite32(ret, host->ioaddr + base);
 }
 
 /*
@@ -149,19 +351,17 @@ static void esdhc_writeb(struct sdhci_host *host, u8 val, int reg)
  * For Continue, apply soft reset for data(SYSCTL[RSTD]);
  * and re-issue the entire read transaction from beginning.
  */
-static void esdhci_of_adma_workaround(struct sdhci_host *host, u32 intmask)
+static void esdhc_of_adma_workaround(struct sdhci_host *host, u32 intmask)
 {
-	u32 tmp;
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_esdhc *esdhc = pltfm_host->priv;
 	bool applicable;
 	dma_addr_t dmastart;
 	dma_addr_t dmanow;
 
-	tmp = in_be32(host->ioaddr + SDHCI_SLOT_INT_STATUS);
-	tmp = (tmp & SDHCI_VENDOR_VER_MASK) >> SDHCI_VENDOR_VER_SHIFT;
-
 	applicable = (intmask & SDHCI_INT_DATA_END) &&
-		(intmask & SDHCI_INT_BLK_GAP) &&
-		(tmp == VENDOR_V_23);
+		     (intmask & SDHCI_INT_BLK_GAP) &&
+		     (esdhc->vendor_ver == VENDOR_V_23);
 	if (!applicable)
 		return;
 
@@ -179,7 +379,11 @@ static void esdhci_of_adma_workaround(struct sdhci_host *host, u32 intmask)
 
 static int esdhc_of_enable_dma(struct sdhci_host *host)
 {
-	setbits32(host->ioaddr + ESDHC_DMA_SYSCTL, ESDHC_DMA_SNOOP);
+	u32 value;
+
+	value = sdhci_readl(host, ESDHC_DMA_SYSCTL);
+	value |= ESDHC_DMA_SNOOP;
+	sdhci_writel(host, value, ESDHC_DMA_SYSCTL);
 	return 0;
 }
 
@@ -199,7 +403,9 @@ static unsigned int esdhc_of_get_min_clock(struct sdhci_host *host)
 
 static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock)
 {
-	int pre_div = 2;
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_esdhc *esdhc = pltfm_host->priv;
+	int pre_div = 1;
 	int div = 1;
 	u32 temp;
 
@@ -208,6 +414,10 @@ static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock)
 	if (clock == 0)
 		return;
 
+	/* Workaround to start pre_div at 2 for VNN < VENDOR_V_23 */
+	if (esdhc->vendor_ver < VENDOR_V_23)
+		pre_div = 2;
+
 	/* Workaround to reduce the clock frequency for p1010 esdhc */
 	if (of_find_compatible_node(NULL, NULL, "fsl,p1010-esdhc")) {
 		if (clock > 20000000)
@@ -229,7 +439,7 @@ static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock)
 
 	dev_dbg(mmc_dev(host->mmc), "desired SD clock: %d, actual: %d\n",
 		clock, host->max_clk / pre_div / div);
-
+	host->mmc->actual_clock = host->max_clk / pre_div / div;
 	pre_div >>= 1;
 	div--;
 
@@ -241,39 +451,26 @@ static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock)
 	mdelay(1);
 }
 
-static void esdhc_of_platform_init(struct sdhci_host *host)
-{
-	u32 vvn;
-
-	vvn = in_be32(host->ioaddr + SDHCI_SLOT_INT_STATUS);
-	vvn = (vvn & SDHCI_VENDOR_VER_MASK) >> SDHCI_VENDOR_VER_SHIFT;
-	if (vvn == VENDOR_V_22)
-		host->quirks2 |= SDHCI_QUIRK2_HOST_NO_CMD23;
-
-	if (vvn > VENDOR_V_22)
-		host->quirks &= ~SDHCI_QUIRK_NO_BUSY_IRQ;
-}
-
 static void esdhc_pltfm_set_bus_width(struct sdhci_host *host, int width)
 {
 	u32 ctrl;
 
+	ctrl = sdhci_readl(host, ESDHC_PROCTL);
+	ctrl &= (~ESDHC_CTRL_BUSWIDTH_MASK);
 	switch (width) {
 	case MMC_BUS_WIDTH_8:
-		ctrl = ESDHC_CTRL_8BITBUS;
+		ctrl |= ESDHC_CTRL_8BITBUS;
 		break;
 
 	case MMC_BUS_WIDTH_4:
-		ctrl = ESDHC_CTRL_4BITBUS;
+		ctrl |= ESDHC_CTRL_4BITBUS;
 		break;
 
 	default:
-		ctrl = 0;
 		break;
 	}
 
-	clrsetbits_be32(host->ioaddr + SDHCI_HOST_CONTROL,
-			ESDHC_CTRL_BUSWIDTH_MASK, ctrl);
+	sdhci_writel(host, ctrl, ESDHC_PROCTL);
 }
 
 static void esdhc_reset(struct sdhci_host *host, u8 mask)
@@ -284,32 +481,13 @@ static void esdhc_reset(struct sdhci_host *host, u8 mask)
 	sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
 }
 
-static const struct sdhci_ops sdhci_esdhc_ops = {
-	.read_l = esdhc_readl,
-	.read_w = esdhc_readw,
-	.read_b = esdhc_readb,
-	.write_l = esdhc_writel,
-	.write_w = esdhc_writew,
-	.write_b = esdhc_writeb,
-	.set_clock = esdhc_of_set_clock,
-	.enable_dma = esdhc_of_enable_dma,
-	.get_max_clock = esdhc_of_get_max_clock,
-	.get_min_clock = esdhc_of_get_min_clock,
-	.platform_init = esdhc_of_platform_init,
-	.adma_workaround = esdhci_of_adma_workaround,
-	.set_bus_width = esdhc_pltfm_set_bus_width,
-	.reset = esdhc_reset,
-	.set_uhs_signaling = sdhci_set_uhs_signaling,
-};
-
 #ifdef CONFIG_PM
-
 static u32 esdhc_proctl;
 static int esdhc_of_suspend(struct device *dev)
 {
 	struct sdhci_host *host = dev_get_drvdata(dev);
 
-	esdhc_proctl = sdhci_be32bs_readl(host, SDHCI_HOST_CONTROL);
+	esdhc_proctl = sdhci_readl(host, SDHCI_HOST_CONTROL);
 
 	return sdhci_suspend_host(host);
 }
@@ -322,9 +500,8 @@ static int esdhc_of_resume(struct device *dev)
 	if (ret == 0) {
 		/* Isn't this already done by sdhci_resume_host() ? --rmk */
 		esdhc_of_enable_dma(host);
-		sdhci_be32bs_writel(host, esdhc_proctl, SDHCI_HOST_CONTROL);
+		sdhci_writel(host, esdhc_proctl, SDHCI_HOST_CONTROL);
 	}
-
 	return ret;
 }
 
@@ -337,30 +514,103 @@ static const struct dev_pm_ops esdhc_pmops = {
 #define ESDHC_PMOPS NULL
 #endif
 
-static const struct sdhci_pltfm_data sdhci_esdhc_pdata = {
-	/*
-	 * card detection could be handled via GPIO
-	 * eSDHC cannot support End Attribute in NOP ADMA descriptor
-	 */
+static const struct sdhci_ops sdhci_esdhc_be_ops = {
+	.read_l = esdhc_be_readl,
+	.read_w = esdhc_be_readw,
+	.read_b = esdhc_be_readb,
+	.write_l = esdhc_be_writel,
+	.write_w = esdhc_be_writew,
+	.write_b = esdhc_be_writeb,
+	.set_clock = esdhc_of_set_clock,
+	.enable_dma = esdhc_of_enable_dma,
+	.get_max_clock = esdhc_of_get_max_clock,
+	.get_min_clock = esdhc_of_get_min_clock,
+	.adma_workaround = esdhc_of_adma_workaround,
+	.set_bus_width = esdhc_pltfm_set_bus_width,
+	.reset = esdhc_reset,
+	.set_uhs_signaling = sdhci_set_uhs_signaling,
+};
+
+static const struct sdhci_ops sdhci_esdhc_le_ops = {
+	.read_l = esdhc_le_readl,
+	.read_w = esdhc_le_readw,
+	.read_b = esdhc_le_readb,
+	.write_l = esdhc_le_writel,
+	.write_w = esdhc_le_writew,
+	.write_b = esdhc_le_writeb,
+	.set_clock = esdhc_of_set_clock,
+	.enable_dma = esdhc_of_enable_dma,
+	.get_max_clock = esdhc_of_get_max_clock,
+	.get_min_clock = esdhc_of_get_min_clock,
+	.adma_workaround = esdhc_of_adma_workaround,
+	.set_bus_width = esdhc_pltfm_set_bus_width,
+	.reset = esdhc_reset,
+	.set_uhs_signaling = sdhci_set_uhs_signaling,
+};
+
+static const struct sdhci_pltfm_data sdhci_esdhc_be_pdata = {
 	.quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_BROKEN_CARD_DETECTION
 		| SDHCI_QUIRK_NO_CARD_NO_RESET
 		| SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
-	.ops = &sdhci_esdhc_ops,
+	.ops = &sdhci_esdhc_be_ops,
 };
 
+static const struct sdhci_pltfm_data sdhci_esdhc_le_pdata = {
+	.quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_BROKEN_CARD_DETECTION
+		| SDHCI_QUIRK_NO_CARD_NO_RESET
+		| SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
+	.ops = &sdhci_esdhc_le_ops,
+};
+
+static void esdhc_init(struct platform_device *pdev, struct sdhci_host *host)
+{
+	struct sdhci_pltfm_host *pltfm_host;
+	struct sdhci_esdhc *esdhc;
+	u16 host_ver;
+
+	pltfm_host = sdhci_priv(host);
+	esdhc = devm_kzalloc(&pdev->dev, sizeof(struct sdhci_esdhc),
+			     GFP_KERNEL);
+
+	host_ver = sdhci_readw(host, SDHCI_HOST_VERSION);
+	esdhc->vendor_ver = (host_ver & SDHCI_VENDOR_VER_MASK) >>
+			     SDHCI_VENDOR_VER_SHIFT;
+	esdhc->spec_ver = host_ver & SDHCI_SPEC_VER_MASK;
+
+	pltfm_host->priv = esdhc;
+}
+
 static int sdhci_esdhc_probe(struct platform_device *pdev)
 {
 	struct sdhci_host *host;
 	struct device_node *np;
 	int ret;
 
-	host = sdhci_pltfm_init(pdev, &sdhci_esdhc_pdata, 0);
+	np = pdev->dev.of_node;
+
+	if (of_get_property(np, "little-endian", NULL))
+		host = sdhci_pltfm_init(pdev, &sdhci_esdhc_le_pdata, 0);
+	else
+		host = sdhci_pltfm_init(pdev, &sdhci_esdhc_be_pdata, 0);
+
 	if (IS_ERR(host))
 		return PTR_ERR(host);
 
+	esdhc_init(pdev, host);
+
 	sdhci_get_of_property(pdev);
 
-	np = pdev->dev.of_node;
+	if (of_device_is_compatible(np, "fsl,p5040-esdhc") ||
+	    of_device_is_compatible(np, "fsl,p5020-esdhc") ||
+	    of_device_is_compatible(np, "fsl,p4080-esdhc") ||
+	    of_device_is_compatible(np, "fsl,p1020-esdhc") ||
+	    of_device_is_compatible(np, "fsl,t1040-esdhc") ||
+	    of_device_is_compatible(np, "fsl,ls1021a-esdhc"))
+		host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION;
+
+	if (of_device_is_compatible(np, "fsl,ls1021a-esdhc"))
+		host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
+
 	if (of_device_is_compatible(np, "fsl,p2020-esdhc")) {
 		/*
 		 * Freescale messed up with P2020 as it has a non-standard