diff options
author | 2015-08-04 12:17:53 -0700 | |
---|---|---|
committer | 2015-08-04 15:44:42 -0700 | |
commit | 9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 (patch) | |
tree | 1c9cafbcd35f783a87880a10f85d1a060db1a563 /kernel/drivers/mmc/core/core.c | |
parent | 98260f3884f4a202f9ca5eabed40b1354c489b29 (diff) |
Add the rt linux 4.1.3-rt3 as base
Import the rt linux 4.1.3-rt3 as OPNFV kvm base.
It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:
commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Sat Jul 25 12:13:34 2015 +0200
Prepare v4.1.3-rt3
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.
Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>
Diffstat (limited to 'kernel/drivers/mmc/core/core.c')
-rw-r--r-- | kernel/drivers/mmc/core/core.c | 2753 |
1 files changed, 2753 insertions, 0 deletions
diff --git a/kernel/drivers/mmc/core/core.c b/kernel/drivers/mmc/core/core.c new file mode 100644 index 000000000..92e767142 --- /dev/null +++ b/kernel/drivers/mmc/core/core.c @@ -0,0 +1,2753 @@ +/* + * linux/drivers/mmc/core/core.c + * + * Copyright (C) 2003-2004 Russell King, All Rights Reserved. + * SD support Copyright (C) 2004 Ian Molton, All Rights Reserved. + * Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved. + * MMCv4 support Copyright (C) 2006 Philip Langdale, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/module.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/completion.h> +#include <linux/device.h> +#include <linux/delay.h> +#include <linux/pagemap.h> +#include <linux/err.h> +#include <linux/leds.h> +#include <linux/scatterlist.h> +#include <linux/log2.h> +#include <linux/regulator/consumer.h> +#include <linux/pm_runtime.h> +#include <linux/pm_wakeup.h> +#include <linux/suspend.h> +#include <linux/fault-inject.h> +#include <linux/random.h> +#include <linux/slab.h> +#include <linux/of.h> + +#include <linux/mmc/card.h> +#include <linux/mmc/host.h> +#include <linux/mmc/mmc.h> +#include <linux/mmc/sd.h> +#include <linux/mmc/slot-gpio.h> + +#include "core.h" +#include "bus.h" +#include "host.h" +#include "sdio_bus.h" +#include "pwrseq.h" + +#include "mmc_ops.h" +#include "sd_ops.h" +#include "sdio_ops.h" + +/* If the device is not responding */ +#define MMC_CORE_TIMEOUT_MS (10 * 60 * 1000) /* 10 minute timeout */ + +/* + * Background operations can take a long time, depending on the housekeeping + * operations the card has to perform. + */ +#define MMC_BKOPS_MAX_TIMEOUT (4 * 60 * 1000) /* max time to wait in ms */ + +static struct workqueue_struct *workqueue; +static const unsigned freqs[] = { 400000, 300000, 200000, 100000 }; + +/* + * Enabling software CRCs on the data blocks can be a significant (30%) + * performance cost, and for other reasons may not always be desired. + * So we allow it it to be disabled. + */ +bool use_spi_crc = 1; +module_param(use_spi_crc, bool, 0); + +/* + * Internal function. Schedule delayed work in the MMC work queue. + */ +static int mmc_schedule_delayed_work(struct delayed_work *work, + unsigned long delay) +{ + return queue_delayed_work(workqueue, work, delay); +} + +/* + * Internal function. Flush all scheduled work from the MMC work queue. + */ +static void mmc_flush_scheduled_work(void) +{ + flush_workqueue(workqueue); +} + +#ifdef CONFIG_FAIL_MMC_REQUEST + +/* + * Internal function. Inject random data errors. + * If mmc_data is NULL no errors are injected. + */ +static void mmc_should_fail_request(struct mmc_host *host, + struct mmc_request *mrq) +{ + struct mmc_command *cmd = mrq->cmd; + struct mmc_data *data = mrq->data; + static const int data_errors[] = { + -ETIMEDOUT, + -EILSEQ, + -EIO, + }; + + if (!data) + return; + + if (cmd->error || data->error || + !should_fail(&host->fail_mmc_request, data->blksz * data->blocks)) + return; + + data->error = data_errors[prandom_u32() % ARRAY_SIZE(data_errors)]; + data->bytes_xfered = (prandom_u32() % (data->bytes_xfered >> 9)) << 9; +} + +#else /* CONFIG_FAIL_MMC_REQUEST */ + +static inline void mmc_should_fail_request(struct mmc_host *host, + struct mmc_request *mrq) +{ +} + +#endif /* CONFIG_FAIL_MMC_REQUEST */ + +/** + * mmc_request_done - finish processing an MMC request + * @host: MMC host which completed request + * @mrq: MMC request which request + * + * MMC drivers should call this function when they have completed + * their processing of a request. + */ +void mmc_request_done(struct mmc_host *host, struct mmc_request *mrq) +{ + struct mmc_command *cmd = mrq->cmd; + int err = cmd->error; + + if (err && cmd->retries && mmc_host_is_spi(host)) { + if (cmd->resp[0] & R1_SPI_ILLEGAL_COMMAND) + cmd->retries = 0; + } + + if (err && cmd->retries && !mmc_card_removed(host->card)) { + /* + * Request starter must handle retries - see + * mmc_wait_for_req_done(). + */ + if (mrq->done) + mrq->done(mrq); + } else { + mmc_should_fail_request(host, mrq); + + led_trigger_event(host->led, LED_OFF); + + if (mrq->sbc) { + pr_debug("%s: req done <CMD%u>: %d: %08x %08x %08x %08x\n", + mmc_hostname(host), mrq->sbc->opcode, + mrq->sbc->error, + mrq->sbc->resp[0], mrq->sbc->resp[1], + mrq->sbc->resp[2], mrq->sbc->resp[3]); + } + + pr_debug("%s: req done (CMD%u): %d: %08x %08x %08x %08x\n", + mmc_hostname(host), cmd->opcode, err, + cmd->resp[0], cmd->resp[1], + cmd->resp[2], cmd->resp[3]); + + if (mrq->data) { + pr_debug("%s: %d bytes transferred: %d\n", + mmc_hostname(host), + mrq->data->bytes_xfered, mrq->data->error); + } + + if (mrq->stop) { + pr_debug("%s: (CMD%u): %d: %08x %08x %08x %08x\n", + mmc_hostname(host), mrq->stop->opcode, + mrq->stop->error, + mrq->stop->resp[0], mrq->stop->resp[1], + mrq->stop->resp[2], mrq->stop->resp[3]); + } + + if (mrq->done) + mrq->done(mrq); + + mmc_host_clk_release(host); + } +} + +EXPORT_SYMBOL(mmc_request_done); + +static int mmc_start_request(struct mmc_host *host, struct mmc_request *mrq) +{ +#ifdef CONFIG_MMC_DEBUG + unsigned int i, sz; + struct scatterlist *sg; +#endif + if (mmc_card_removed(host->card)) + return -ENOMEDIUM; + + if (mrq->sbc) { + pr_debug("<%s: starting CMD%u arg %08x flags %08x>\n", + mmc_hostname(host), mrq->sbc->opcode, + mrq->sbc->arg, mrq->sbc->flags); + } + + pr_debug("%s: starting CMD%u arg %08x flags %08x\n", + mmc_hostname(host), mrq->cmd->opcode, + mrq->cmd->arg, mrq->cmd->flags); + + if (mrq->data) { + pr_debug("%s: blksz %d blocks %d flags %08x " + "tsac %d ms nsac %d\n", + mmc_hostname(host), mrq->data->blksz, + mrq->data->blocks, mrq->data->flags, + mrq->data->timeout_ns / 1000000, + mrq->data->timeout_clks); + } + + if (mrq->stop) { + pr_debug("%s: CMD%u arg %08x flags %08x\n", + mmc_hostname(host), mrq->stop->opcode, + mrq->stop->arg, mrq->stop->flags); + } + + WARN_ON(!host->claimed); + + mrq->cmd->error = 0; + mrq->cmd->mrq = mrq; + if (mrq->sbc) { + mrq->sbc->error = 0; + mrq->sbc->mrq = mrq; + } + if (mrq->data) { + BUG_ON(mrq->data->blksz > host->max_blk_size); + BUG_ON(mrq->data->blocks > host->max_blk_count); + BUG_ON(mrq->data->blocks * mrq->data->blksz > + host->max_req_size); + +#ifdef CONFIG_MMC_DEBUG + sz = 0; + for_each_sg(mrq->data->sg, sg, mrq->data->sg_len, i) + sz += sg->length; + BUG_ON(sz != mrq->data->blocks * mrq->data->blksz); +#endif + + mrq->cmd->data = mrq->data; + mrq->data->error = 0; + mrq->data->mrq = mrq; + if (mrq->stop) { + mrq->data->stop = mrq->stop; + mrq->stop->error = 0; + mrq->stop->mrq = mrq; + } + } + mmc_host_clk_hold(host); + led_trigger_event(host->led, LED_FULL); + host->ops->request(host, mrq); + + return 0; +} + +/** + * mmc_start_bkops - start BKOPS for supported cards + * @card: MMC card to start BKOPS + * @form_exception: A flag to indicate if this function was + * called due to an exception raised by the card + * + * Start background operations whenever requested. + * When the urgent BKOPS bit is set in a R1 command response + * then background operations should be started immediately. +*/ +void mmc_start_bkops(struct mmc_card *card, bool from_exception) +{ + int err; + int timeout; + bool use_busy_signal; + + BUG_ON(!card); + + if (!card->ext_csd.man_bkops_en || mmc_card_doing_bkops(card)) + return; + + err = mmc_read_bkops_status(card); + if (err) { + pr_err("%s: Failed to read bkops status: %d\n", + mmc_hostname(card->host), err); + return; + } + + if (!card->ext_csd.raw_bkops_status) + return; + + if (card->ext_csd.raw_bkops_status < EXT_CSD_BKOPS_LEVEL_2 && + from_exception) + return; + + mmc_claim_host(card->host); + if (card->ext_csd.raw_bkops_status >= EXT_CSD_BKOPS_LEVEL_2) { + timeout = MMC_BKOPS_MAX_TIMEOUT; + use_busy_signal = true; + } else { + timeout = 0; + use_busy_signal = false; + } + + err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_BKOPS_START, 1, timeout, + use_busy_signal, true, false); + if (err) { + pr_warn("%s: Error %d starting bkops\n", + mmc_hostname(card->host), err); + goto out; + } + + /* + * For urgent bkops status (LEVEL_2 and more) + * bkops executed synchronously, otherwise + * the operation is in progress + */ + if (!use_busy_signal) + mmc_card_set_doing_bkops(card); +out: + mmc_release_host(card->host); +} +EXPORT_SYMBOL(mmc_start_bkops); + +/* + * mmc_wait_data_done() - done callback for data request + * @mrq: done data request + * + * Wakes up mmc context, passed as a callback to host controller driver + */ +static void mmc_wait_data_done(struct mmc_request *mrq) +{ + mrq->host->context_info.is_done_rcv = true; + wake_up_interruptible(&mrq->host->context_info.wait); +} + +static void mmc_wait_done(struct mmc_request *mrq) +{ + complete(&mrq->completion); +} + +/* + *__mmc_start_data_req() - starts data request + * @host: MMC host to start the request + * @mrq: data request to start + * + * Sets the done callback to be called when request is completed by the card. + * Starts data mmc request execution + */ +static int __mmc_start_data_req(struct mmc_host *host, struct mmc_request *mrq) +{ + int err; + + mrq->done = mmc_wait_data_done; + mrq->host = host; + + err = mmc_start_request(host, mrq); + if (err) { + mrq->cmd->error = err; + mmc_wait_data_done(mrq); + } + + return err; +} + +static int __mmc_start_req(struct mmc_host *host, struct mmc_request *mrq) +{ + int err; + + init_completion(&mrq->completion); + mrq->done = mmc_wait_done; + + err = mmc_start_request(host, mrq); + if (err) { + mrq->cmd->error = err; + complete(&mrq->completion); + } + + return err; +} + +/* + * mmc_wait_for_data_req_done() - wait for request completed + * @host: MMC host to prepare the command. + * @mrq: MMC request to wait for + * + * Blocks MMC context till host controller will ack end of data request + * execution or new request notification arrives from the block layer. + * Handles command retries. + * + * Returns enum mmc_blk_status after checking errors. + */ +static int mmc_wait_for_data_req_done(struct mmc_host *host, + struct mmc_request *mrq, + struct mmc_async_req *next_req) +{ + struct mmc_command *cmd; + struct mmc_context_info *context_info = &host->context_info; + int err; + unsigned long flags; + + while (1) { + wait_event_interruptible(context_info->wait, + (context_info->is_done_rcv || + context_info->is_new_req)); + spin_lock_irqsave(&context_info->lock, flags); + context_info->is_waiting_last_req = false; + spin_unlock_irqrestore(&context_info->lock, flags); + if (context_info->is_done_rcv) { + context_info->is_done_rcv = false; + context_info->is_new_req = false; + cmd = mrq->cmd; + + if (!cmd->error || !cmd->retries || + mmc_card_removed(host->card)) { + err = host->areq->err_check(host->card, + host->areq); + break; /* return err */ + } else { + pr_info("%s: req failed (CMD%u): %d, retrying...\n", + mmc_hostname(host), + cmd->opcode, cmd->error); + cmd->retries--; + cmd->error = 0; + host->ops->request(host, mrq); + continue; /* wait for done/new event again */ + } + } else if (context_info->is_new_req) { + context_info->is_new_req = false; + if (!next_req) { + err = MMC_BLK_NEW_REQUEST; + break; /* return err */ + } + } + } + return err; +} + +static void mmc_wait_for_req_done(struct mmc_host *host, + struct mmc_request *mrq) +{ + struct mmc_command *cmd; + + while (1) { + wait_for_completion(&mrq->completion); + + cmd = mrq->cmd; + + /* + * If host has timed out waiting for the sanitize + * to complete, card might be still in programming state + * so let's try to bring the card out of programming + * state. + */ + if (cmd->sanitize_busy && cmd->error == -ETIMEDOUT) { + if (!mmc_interrupt_hpi(host->card)) { + pr_warn("%s: %s: Interrupted sanitize\n", + mmc_hostname(host), __func__); + cmd->error = 0; + break; + } else { + pr_err("%s: %s: Failed to interrupt sanitize\n", + mmc_hostname(host), __func__); + } + } + if (!cmd->error || !cmd->retries || + mmc_card_removed(host->card)) + break; + + pr_debug("%s: req failed (CMD%u): %d, retrying...\n", + mmc_hostname(host), cmd->opcode, cmd->error); + cmd->retries--; + cmd->error = 0; + host->ops->request(host, mrq); + } +} + +/** + * mmc_pre_req - Prepare for a new request + * @host: MMC host to prepare command + * @mrq: MMC request to prepare for + * @is_first_req: true if there is no previous started request + * that may run in parellel to this call, otherwise false + * + * mmc_pre_req() is called in prior to mmc_start_req() to let + * host prepare for the new request. Preparation of a request may be + * performed while another request is running on the host. + */ +static void mmc_pre_req(struct mmc_host *host, struct mmc_request *mrq, + bool is_first_req) +{ + if (host->ops->pre_req) { + mmc_host_clk_hold(host); + host->ops->pre_req(host, mrq, is_first_req); + mmc_host_clk_release(host); + } +} + +/** + * mmc_post_req - Post process a completed request + * @host: MMC host to post process command + * @mrq: MMC request to post process for + * @err: Error, if non zero, clean up any resources made in pre_req + * + * Let the host post process a completed request. Post processing of + * a request may be performed while another reuqest is running. + */ +static void mmc_post_req(struct mmc_host *host, struct mmc_request *mrq, + int err) +{ + if (host->ops->post_req) { + mmc_host_clk_hold(host); + host->ops->post_req(host, mrq, err); + mmc_host_clk_release(host); + } +} + +/** + * mmc_start_req - start a non-blocking request + * @host: MMC host to start command + * @areq: async request to start + * @error: out parameter returns 0 for success, otherwise non zero + * + * Start a new MMC custom command request for a host. + * If there is on ongoing async request wait for completion + * of that request and start the new one and return. + * Does not wait for the new request to complete. + * + * Returns the completed request, NULL in case of none completed. + * Wait for the an ongoing request (previoulsy started) to complete and + * return the completed request. If there is no ongoing request, NULL + * is returned without waiting. NULL is not an error condition. + */ +struct mmc_async_req *mmc_start_req(struct mmc_host *host, + struct mmc_async_req *areq, int *error) +{ + int err = 0; + int start_err = 0; + struct mmc_async_req *data = host->areq; + + /* Prepare a new request */ + if (areq) + mmc_pre_req(host, areq->mrq, !host->areq); + + if (host->areq) { + err = mmc_wait_for_data_req_done(host, host->areq->mrq, areq); + if (err == MMC_BLK_NEW_REQUEST) { + if (error) + *error = err; + /* + * The previous request was not completed, + * nothing to return + */ + return NULL; + } + /* + * Check BKOPS urgency for each R1 response + */ + if (host->card && mmc_card_mmc(host->card) && + ((mmc_resp_type(host->areq->mrq->cmd) == MMC_RSP_R1) || + (mmc_resp_type(host->areq->mrq->cmd) == MMC_RSP_R1B)) && + (host->areq->mrq->cmd->resp[0] & R1_EXCEPTION_EVENT)) { + + /* Cancel the prepared request */ + if (areq) + mmc_post_req(host, areq->mrq, -EINVAL); + + mmc_start_bkops(host->card, true); + + /* prepare the request again */ + if (areq) + mmc_pre_req(host, areq->mrq, !host->areq); + } + } + + if (!err && areq) + start_err = __mmc_start_data_req(host, areq->mrq); + + if (host->areq) + mmc_post_req(host, host->areq->mrq, 0); + + /* Cancel a prepared request if it was not started. */ + if ((err || start_err) && areq) + mmc_post_req(host, areq->mrq, -EINVAL); + + if (err) + host->areq = NULL; + else + host->areq = areq; + + if (error) + *error = err; + return data; +} +EXPORT_SYMBOL(mmc_start_req); + +/** + * mmc_wait_for_req - start a request and wait for completion + * @host: MMC host to start command + * @mrq: MMC request to start + * + * Start a new MMC custom command request for a host, and wait + * for the command to complete. Does not attempt to parse the + * response. + */ +void mmc_wait_for_req(struct mmc_host *host, struct mmc_request *mrq) +{ + __mmc_start_req(host, mrq); + mmc_wait_for_req_done(host, mrq); +} +EXPORT_SYMBOL(mmc_wait_for_req); + +/** + * mmc_interrupt_hpi - Issue for High priority Interrupt + * @card: the MMC card associated with the HPI transfer + * + * Issued High Priority Interrupt, and check for card status + * until out-of prg-state. + */ +int mmc_interrupt_hpi(struct mmc_card *card) +{ + int err; + u32 status; + unsigned long prg_wait; + + BUG_ON(!card); + + if (!card->ext_csd.hpi_en) { + pr_info("%s: HPI enable bit unset\n", mmc_hostname(card->host)); + return 1; + } + + mmc_claim_host(card->host); + err = mmc_send_status(card, &status); + if (err) { + pr_err("%s: Get card status fail\n", mmc_hostname(card->host)); + goto out; + } + + switch (R1_CURRENT_STATE(status)) { + case R1_STATE_IDLE: + case R1_STATE_READY: + case R1_STATE_STBY: + case R1_STATE_TRAN: + /* + * In idle and transfer states, HPI is not needed and the caller + * can issue the next intended command immediately + */ + goto out; + case R1_STATE_PRG: + break; + default: + /* In all other states, it's illegal to issue HPI */ + pr_debug("%s: HPI cannot be sent. Card state=%d\n", + mmc_hostname(card->host), R1_CURRENT_STATE(status)); + err = -EINVAL; + goto out; + } + + err = mmc_send_hpi_cmd(card, &status); + if (err) + goto out; + + prg_wait = jiffies + msecs_to_jiffies(card->ext_csd.out_of_int_time); + do { + err = mmc_send_status(card, &status); + + if (!err && R1_CURRENT_STATE(status) == R1_STATE_TRAN) + break; + if (time_after(jiffies, prg_wait)) + err = -ETIMEDOUT; + } while (!err); + +out: + mmc_release_host(card->host); + return err; +} +EXPORT_SYMBOL(mmc_interrupt_hpi); + +/** + * mmc_wait_for_cmd - start a command and wait for completion + * @host: MMC host to start command + * @cmd: MMC command to start + * @retries: maximum number of retries + * + * Start a new MMC command for a host, and wait for the command + * to complete. Return any error that occurred while the command + * was executing. Do not attempt to parse the response. + */ +int mmc_wait_for_cmd(struct mmc_host *host, struct mmc_command *cmd, int retries) +{ + struct mmc_request mrq = {NULL}; + + WARN_ON(!host->claimed); + + memset(cmd->resp, 0, sizeof(cmd->resp)); + cmd->retries = retries; + + mrq.cmd = cmd; + cmd->data = NULL; + + mmc_wait_for_req(host, &mrq); + + return cmd->error; +} + +EXPORT_SYMBOL(mmc_wait_for_cmd); + +/** + * mmc_stop_bkops - stop ongoing BKOPS + * @card: MMC card to check BKOPS + * + * Send HPI command to stop ongoing background operations to + * allow rapid servicing of foreground operations, e.g. read/ + * writes. Wait until the card comes out of the programming state + * to avoid errors in servicing read/write requests. + */ +int mmc_stop_bkops(struct mmc_card *card) +{ + int err = 0; + + BUG_ON(!card); + err = mmc_interrupt_hpi(card); + + /* + * If err is EINVAL, we can't issue an HPI. + * It should complete the BKOPS. + */ + if (!err || (err == -EINVAL)) { + mmc_card_clr_doing_bkops(card); + err = 0; + } + + return err; +} +EXPORT_SYMBOL(mmc_stop_bkops); + +int mmc_read_bkops_status(struct mmc_card *card) +{ + int err; + u8 *ext_csd; + + mmc_claim_host(card->host); + err = mmc_get_ext_csd(card, &ext_csd); + mmc_release_host(card->host); + if (err) + return err; + + card->ext_csd.raw_bkops_status = ext_csd[EXT_CSD_BKOPS_STATUS]; + card->ext_csd.raw_exception_status = ext_csd[EXT_CSD_EXP_EVENTS_STATUS]; + kfree(ext_csd); + return 0; +} +EXPORT_SYMBOL(mmc_read_bkops_status); + +/** + * mmc_set_data_timeout - set the timeout for a data command + * @data: data phase for command + * @card: the MMC card associated with the data transfer + * + * Computes the data timeout parameters according to the + * correct algorithm given the card type. + */ +void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card) +{ + unsigned int mult; + + /* + * SDIO cards only define an upper 1 s limit on access. + */ + if (mmc_card_sdio(card)) { + data->timeout_ns = 1000000000; + data->timeout_clks = 0; + return; + } + + /* + * SD cards use a 100 multiplier rather than 10 + */ + mult = mmc_card_sd(card) ? 100 : 10; + + /* + * Scale up the multiplier (and therefore the timeout) by + * the r2w factor for writes. + */ + if (data->flags & MMC_DATA_WRITE) + mult <<= card->csd.r2w_factor; + + data->timeout_ns = card->csd.tacc_ns * mult; + data->timeout_clks = card->csd.tacc_clks * mult; + + /* + * SD cards also have an upper limit on the timeout. + */ + if (mmc_card_sd(card)) { + unsigned int timeout_us, limit_us; + + timeout_us = data->timeout_ns / 1000; + if (mmc_host_clk_rate(card->host)) + timeout_us += data->timeout_clks * 1000 / + (mmc_host_clk_rate(card->host) / 1000); + + if (data->flags & MMC_DATA_WRITE) + /* + * The MMC spec "It is strongly recommended + * for hosts to implement more than 500ms + * timeout value even if the card indicates + * the 250ms maximum busy length." Even the + * previous value of 300ms is known to be + * insufficient for some cards. + */ + limit_us = 3000000; + else + limit_us = 100000; + + /* + * SDHC cards always use these fixed values. + */ + if (timeout_us > limit_us || mmc_card_blockaddr(card)) { + data->timeout_ns = limit_us * 1000; + data->timeout_clks = 0; + } + + /* assign limit value if invalid */ + if (timeout_us == 0) + data->timeout_ns = limit_us * 1000; + } + + /* + * Some cards require longer data read timeout than indicated in CSD. + * Address this by setting the read timeout to a "reasonably high" + * value. For the cards tested, 300ms has proven enough. If necessary, + * this value can be increased if other problematic cards require this. + */ + if (mmc_card_long_read_time(card) && data->flags & MMC_DATA_READ) { + data->timeout_ns = 300000000; + data->timeout_clks = 0; + } + + /* + * Some cards need very high timeouts if driven in SPI mode. + * The worst observed timeout was 900ms after writing a + * continuous stream of data until the internal logic + * overflowed. + */ + if (mmc_host_is_spi(card->host)) { + if (data->flags & MMC_DATA_WRITE) { + if (data->timeout_ns < 1000000000) + data->timeout_ns = 1000000000; /* 1s */ + } else { + if (data->timeout_ns < 100000000) + data->timeout_ns = 100000000; /* 100ms */ + } + } +} +EXPORT_SYMBOL(mmc_set_data_timeout); + +/** + * mmc_align_data_size - pads a transfer size to a more optimal value + * @card: the MMC card associated with the data transfer + * @sz: original transfer size + * + * Pads the original data size with a number of extra bytes in + * order to avoid controller bugs and/or performance hits + * (e.g. some controllers revert to PIO for certain sizes). + * + * Returns the improved size, which might be unmodified. + * + * Note that this function is only relevant when issuing a + * single scatter gather entry. + */ +unsigned int mmc_align_data_size(struct mmc_card *card, unsigned int sz) +{ + /* + * FIXME: We don't have a system for the controller to tell + * the core about its problems yet, so for now we just 32-bit + * align the size. + */ + sz = ((sz + 3) / 4) * 4; + + return sz; +} +EXPORT_SYMBOL(mmc_align_data_size); + +/** + * __mmc_claim_host - exclusively claim a host + * @host: mmc host to claim + * @abort: whether or not the operation should be aborted + * + * Claim a host for a set of operations. If @abort is non null and + * dereference a non-zero value then this will return prematurely with + * that non-zero value without acquiring the lock. Returns zero + * with the lock held otherwise. + */ +int __mmc_claim_host(struct mmc_host *host, atomic_t *abort) +{ + DECLARE_WAITQUEUE(wait, current); + unsigned long flags; + int stop; + bool pm = false; + + might_sleep(); + + add_wait_queue(&host->wq, &wait); + spin_lock_irqsave(&host->lock, flags); + while (1) { + set_current_state(TASK_UNINTERRUPTIBLE); + stop = abort ? atomic_read(abort) : 0; + if (stop || !host->claimed || host->claimer == current) + break; + spin_unlock_irqrestore(&host->lock, flags); + schedule(); + spin_lock_irqsave(&host->lock, flags); + } + set_current_state(TASK_RUNNING); + if (!stop) { + host->claimed = 1; + host->claimer = current; + host->claim_cnt += 1; + if (host->claim_cnt == 1) + pm = true; + } else + wake_up(&host->wq); + spin_unlock_irqrestore(&host->lock, flags); + remove_wait_queue(&host->wq, &wait); + + if (pm) + pm_runtime_get_sync(mmc_dev(host)); + + return stop; +} +EXPORT_SYMBOL(__mmc_claim_host); + +/** + * mmc_release_host - release a host + * @host: mmc host to release + * + * Release a MMC host, allowing others to claim the host + * for their operations. + */ +void mmc_release_host(struct mmc_host *host) +{ + unsigned long flags; + + WARN_ON(!host->claimed); + + spin_lock_irqsave(&host->lock, flags); + if (--host->claim_cnt) { + /* Release for nested claim */ + spin_unlock_irqrestore(&host->lock, flags); + } else { + host->claimed = 0; + host->claimer = NULL; + spin_unlock_irqrestore(&host->lock, flags); + wake_up(&host->wq); + pm_runtime_mark_last_busy(mmc_dev(host)); + pm_runtime_put_autosuspend(mmc_dev(host)); + } +} +EXPORT_SYMBOL(mmc_release_host); + +/* + * This is a helper function, which fetches a runtime pm reference for the + * card device and also claims the host. + */ +void mmc_get_card(struct mmc_card *card) +{ + pm_runtime_get_sync(&card->dev); + mmc_claim_host(card->host); +} +EXPORT_SYMBOL(mmc_get_card); + +/* + * This is a helper function, which releases the host and drops the runtime + * pm reference for the card device. + */ +void mmc_put_card(struct mmc_card *card) +{ + mmc_release_host(card->host); + pm_runtime_mark_last_busy(&card->dev); + pm_runtime_put_autosuspend(&card->dev); +} +EXPORT_SYMBOL(mmc_put_card); + +/* + * Internal function that does the actual ios call to the host driver, + * optionally printing some debug output. + */ +static inline void mmc_set_ios(struct mmc_host *host) +{ + struct mmc_ios *ios = &host->ios; + + pr_debug("%s: clock %uHz busmode %u powermode %u cs %u Vdd %u " + "width %u timing %u\n", + mmc_hostname(host), ios->clock, ios->bus_mode, + ios->power_mode, ios->chip_select, ios->vdd, + ios->bus_width, ios->timing); + + if (ios->clock > 0) + mmc_set_ungated(host); + host->ops->set_ios(host, ios); +} + +/* + * Control chip select pin on a host. + */ +void mmc_set_chip_select(struct mmc_host *host, int mode) +{ + mmc_host_clk_hold(host); + host->ios.chip_select = mode; + mmc_set_ios(host); + mmc_host_clk_release(host); +} + +/* + * Sets the host clock to the highest possible frequency that + * is below "hz". + */ +static void __mmc_set_clock(struct mmc_host *host, unsigned int hz) +{ + WARN_ON(hz && hz < host->f_min); + + if (hz > host->f_max) + hz = host->f_max; + + host->ios.clock = hz; + mmc_set_ios(host); +} + +void mmc_set_clock(struct mmc_host *host, unsigned int hz) +{ + mmc_host_clk_hold(host); + __mmc_set_clock(host, hz); + mmc_host_clk_release(host); +} + +#ifdef CONFIG_MMC_CLKGATE +/* + * This gates the clock by setting it to 0 Hz. + */ +void mmc_gate_clock(struct mmc_host *host) +{ + unsigned long flags; + + spin_lock_irqsave(&host->clk_lock, flags); + host->clk_old = host->ios.clock; + host->ios.clock = 0; + host->clk_gated = true; + spin_unlock_irqrestore(&host->clk_lock, flags); + mmc_set_ios(host); +} + +/* + * This restores the clock from gating by using the cached + * clock value. + */ +void mmc_ungate_clock(struct mmc_host *host) +{ + /* + * We should previously have gated the clock, so the clock shall + * be 0 here! The clock may however be 0 during initialization, + * when some request operations are performed before setting + * the frequency. When ungate is requested in that situation + * we just ignore the call. + */ + if (host->clk_old) { + BUG_ON(host->ios.clock); + /* This call will also set host->clk_gated to false */ + __mmc_set_clock(host, host->clk_old); + } +} + +void mmc_set_ungated(struct mmc_host *host) +{ + unsigned long flags; + + /* + * We've been given a new frequency while the clock is gated, + * so make sure we regard this as ungating it. + */ + spin_lock_irqsave(&host->clk_lock, flags); + host->clk_gated = false; + spin_unlock_irqrestore(&host->clk_lock, flags); +} + +#else +void mmc_set_ungated(struct mmc_host *host) +{ +} +#endif + +int mmc_execute_tuning(struct mmc_card *card) +{ + struct mmc_host *host = card->host; + u32 opcode; + int err; + + if (!host->ops->execute_tuning) + return 0; + + if (mmc_card_mmc(card)) + opcode = MMC_SEND_TUNING_BLOCK_HS200; + else + opcode = MMC_SEND_TUNING_BLOCK; + + mmc_host_clk_hold(host); + err = host->ops->execute_tuning(host, opcode); + mmc_host_clk_release(host); + + if (err) + pr_err("%s: tuning execution failed\n", mmc_hostname(host)); + + return err; +} + +/* + * Change the bus mode (open drain/push-pull) of a host. + */ +void mmc_set_bus_mode(struct mmc_host *host, unsigned int mode) +{ + mmc_host_clk_hold(host); + host->ios.bus_mode = mode; + mmc_set_ios(host); + mmc_host_clk_release(host); +} + +/* + * Change data bus width of a host. + */ +void mmc_set_bus_width(struct mmc_host *host, unsigned int width) +{ + mmc_host_clk_hold(host); + host->ios.bus_width = width; + mmc_set_ios(host); + mmc_host_clk_release(host); +} + +/* + * Set initial state after a power cycle or a hw_reset. + */ +void mmc_set_initial_state(struct mmc_host *host) +{ + if (mmc_host_is_spi(host)) + host->ios.chip_select = MMC_CS_HIGH; + else + host->ios.chip_select = MMC_CS_DONTCARE; + host->ios.bus_mode = MMC_BUSMODE_PUSHPULL; + host->ios.bus_width = MMC_BUS_WIDTH_1; + host->ios.timing = MMC_TIMING_LEGACY; + + mmc_set_ios(host); +} + +/** + * mmc_vdd_to_ocrbitnum - Convert a voltage to the OCR bit number + * @vdd: voltage (mV) + * @low_bits: prefer low bits in boundary cases + * + * This function returns the OCR bit number according to the provided @vdd + * value. If conversion is not possible a negative errno value returned. + * + * Depending on the @low_bits flag the function prefers low or high OCR bits + * on boundary voltages. For example, + * with @low_bits = true, 3300 mV translates to ilog2(MMC_VDD_32_33); + * with @low_bits = false, 3300 mV translates to ilog2(MMC_VDD_33_34); + * + * Any value in the [1951:1999] range translates to the ilog2(MMC_VDD_20_21). + */ +static int mmc_vdd_to_ocrbitnum(int vdd, bool low_bits) +{ + const int max_bit = ilog2(MMC_VDD_35_36); + int bit; + + if (vdd < 1650 || vdd > 3600) + return -EINVAL; + + if (vdd >= 1650 && vdd <= 1950) + return ilog2(MMC_VDD_165_195); + + if (low_bits) + vdd -= 1; + + /* Base 2000 mV, step 100 mV, bit's base 8. */ + bit = (vdd - 2000) / 100 + 8; + if (bit > max_bit) + return max_bit; + return bit; +} + +/** + * mmc_vddrange_to_ocrmask - Convert a voltage range to the OCR mask + * @vdd_min: minimum voltage value (mV) + * @vdd_max: maximum voltage value (mV) + * + * This function returns the OCR mask bits according to the provided @vdd_min + * and @vdd_max values. If conversion is not possible the function returns 0. + * + * Notes wrt boundary cases: + * This function sets the OCR bits for all boundary voltages, for example + * [3300:3400] range is translated to MMC_VDD_32_33 | MMC_VDD_33_34 | + * MMC_VDD_34_35 mask. + */ +u32 mmc_vddrange_to_ocrmask(int vdd_min, int vdd_max) +{ + u32 mask = 0; + + if (vdd_max < vdd_min) + return 0; + + /* Prefer high bits for the boundary vdd_max values. */ + vdd_max = mmc_vdd_to_ocrbitnum(vdd_max, false); + if (vdd_max < 0) + return 0; + + /* Prefer low bits for the boundary vdd_min values. */ + vdd_min = mmc_vdd_to_ocrbitnum(vdd_min, true); + if (vdd_min < 0) + return 0; + + /* Fill the mask, from max bit to min bit. */ + while (vdd_max >= vdd_min) + mask |= 1 << vdd_max--; + + return mask; +} +EXPORT_SYMBOL(mmc_vddrange_to_ocrmask); + +#ifdef CONFIG_OF + +/** + * mmc_of_parse_voltage - return mask of supported voltages + * @np: The device node need to be parsed. + * @mask: mask of voltages available for MMC/SD/SDIO + * + * 1. Return zero on success. + * 2. Return negative errno: voltage-range is invalid. + */ +int mmc_of_parse_voltage(struct device_node *np, u32 *mask) +{ + const u32 *voltage_ranges; + int num_ranges, i; + + voltage_ranges = of_get_property(np, "voltage-ranges", &num_ranges); + num_ranges = num_ranges / sizeof(*voltage_ranges) / 2; + if (!voltage_ranges || !num_ranges) { + pr_info("%s: voltage-ranges unspecified\n", np->full_name); + return -EINVAL; + } + + for (i = 0; i < num_ranges; i++) { + const int j = i * 2; + u32 ocr_mask; + + ocr_mask = mmc_vddrange_to_ocrmask( + be32_to_cpu(voltage_ranges[j]), + be32_to_cpu(voltage_ranges[j + 1])); + if (!ocr_mask) { + pr_err("%s: voltage-range #%d is invalid\n", + np->full_name, i); + return -EINVAL; + } + *mask |= ocr_mask; + } + + return 0; +} +EXPORT_SYMBOL(mmc_of_parse_voltage); + +#endif /* CONFIG_OF */ + +static int mmc_of_get_func_num(struct device_node *node) +{ + u32 reg; + int ret; + + ret = of_property_read_u32(node, "reg", ®); + if (ret < 0) + return ret; + + return reg; +} + +struct device_node *mmc_of_find_child_device(struct mmc_host *host, + unsigned func_num) +{ + struct device_node *node; + + if (!host->parent || !host->parent->of_node) + return NULL; + + for_each_child_of_node(host->parent->of_node, node) { + if (mmc_of_get_func_num(node) == func_num) + return node; + } + + return NULL; +} + +#ifdef CONFIG_REGULATOR + +/** + * mmc_regulator_get_ocrmask - return mask of supported voltages + * @supply: regulator to use + * + * This returns either a negative errno, or a mask of voltages that + * can be provided to MMC/SD/SDIO devices using the specified voltage + * regulator. This would normally be called before registering the + * MMC host adapter. + */ +int mmc_regulator_get_ocrmask(struct regulator *supply) +{ + int result = 0; + int count; + int i; + int vdd_uV; + int vdd_mV; + + count = regulator_count_voltages(supply); + if (count < 0) + return count; + + for (i = 0; i < count; i++) { + vdd_uV = regulator_list_voltage(supply, i); + if (vdd_uV <= 0) + continue; + + vdd_mV = vdd_uV / 1000; + result |= mmc_vddrange_to_ocrmask(vdd_mV, vdd_mV); + } + + if (!result) { + vdd_uV = regulator_get_voltage(supply); + if (vdd_uV <= 0) + return vdd_uV; + + vdd_mV = vdd_uV / 1000; + result = mmc_vddrange_to_ocrmask(vdd_mV, vdd_mV); + } + + return result; +} +EXPORT_SYMBOL_GPL(mmc_regulator_get_ocrmask); + +/** + * mmc_regulator_set_ocr - set regulator to match host->ios voltage + * @mmc: the host to regulate + * @supply: regulator to use + * @vdd_bit: zero for power off, else a bit number (host->ios.vdd) + * + * Returns zero on success, else negative errno. + * + * MMC host drivers may use this to enable or disable a regulator using + * a particular supply voltage. This would normally be called from the + * set_ios() method. + */ +int mmc_regulator_set_ocr(struct mmc_host *mmc, + struct regulator *supply, + unsigned short vdd_bit) +{ + int result = 0; + int min_uV, max_uV; + + if (vdd_bit) { + int tmp; + + /* + * REVISIT mmc_vddrange_to_ocrmask() may have set some + * bits this regulator doesn't quite support ... don't + * be too picky, most cards and regulators are OK with + * a 0.1V range goof (it's a small error percentage). + */ + tmp = vdd_bit - ilog2(MMC_VDD_165_195); + if (tmp == 0) { + min_uV = 1650 * 1000; + max_uV = 1950 * 1000; + } else { + min_uV = 1900 * 1000 + tmp * 100 * 1000; + max_uV = min_uV + 100 * 1000; + } + + result = regulator_set_voltage(supply, min_uV, max_uV); + if (result == 0 && !mmc->regulator_enabled) { + result = regulator_enable(supply); + if (!result) + mmc->regulator_enabled = true; + } + } else if (mmc->regulator_enabled) { + result = regulator_disable(supply); + if (result == 0) + mmc->regulator_enabled = false; + } + + if (result) + dev_err(mmc_dev(mmc), + "could not set regulator OCR (%d)\n", result); + return result; +} +EXPORT_SYMBOL_GPL(mmc_regulator_set_ocr); + +#endif /* CONFIG_REGULATOR */ + +int mmc_regulator_get_supply(struct mmc_host *mmc) +{ + struct device *dev = mmc_dev(mmc); + int ret; + + mmc->supply.vmmc = devm_regulator_get_optional(dev, "vmmc"); + mmc->supply.vqmmc = devm_regulator_get_optional(dev, "vqmmc"); + + if (IS_ERR(mmc->supply.vmmc)) { + if (PTR_ERR(mmc->supply.vmmc) == -EPROBE_DEFER) + return -EPROBE_DEFER; + dev_info(dev, "No vmmc regulator found\n"); + } else { + ret = mmc_regulator_get_ocrmask(mmc->supply.vmmc); + if (ret > 0) + mmc->ocr_avail = ret; + else + dev_warn(dev, "Failed getting OCR mask: %d\n", ret); + } + + if (IS_ERR(mmc->supply.vqmmc)) { + if (PTR_ERR(mmc->supply.vqmmc) == -EPROBE_DEFER) + return -EPROBE_DEFER; + dev_info(dev, "No vqmmc regulator found\n"); + } + + return 0; +} +EXPORT_SYMBOL_GPL(mmc_regulator_get_supply); + +/* + * Mask off any voltages we don't support and select + * the lowest voltage + */ +u32 mmc_select_voltage(struct mmc_host *host, u32 ocr) +{ + int bit; + + /* + * Sanity check the voltages that the card claims to + * support. + */ + if (ocr & 0x7F) { + dev_warn(mmc_dev(host), + "card claims to support voltages below defined range\n"); + ocr &= ~0x7F; + } + + ocr &= host->ocr_avail; + if (!ocr) { + dev_warn(mmc_dev(host), "no support for card's volts\n"); + return 0; + } + + if (host->caps2 & MMC_CAP2_FULL_PWR_CYCLE) { + bit = ffs(ocr) - 1; + ocr &= 3 << bit; + mmc_power_cycle(host, ocr); + } else { + bit = fls(ocr) - 1; + ocr &= 3 << bit; + if (bit != host->ios.vdd) + dev_warn(mmc_dev(host), "exceeding card's volts\n"); + } + + return ocr; +} + +int __mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage) +{ + int err = 0; + int old_signal_voltage = host->ios.signal_voltage; + + host->ios.signal_voltage = signal_voltage; + if (host->ops->start_signal_voltage_switch) { + mmc_host_clk_hold(host); + err = host->ops->start_signal_voltage_switch(host, &host->ios); + mmc_host_clk_release(host); + } + + if (err) + host->ios.signal_voltage = old_signal_voltage; + + return err; + +} + +int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage, u32 ocr) +{ + struct mmc_command cmd = {0}; + int err = 0; + u32 clock; + + BUG_ON(!host); + + /* + * Send CMD11 only if the request is to switch the card to + * 1.8V signalling. + */ + if (signal_voltage == MMC_SIGNAL_VOLTAGE_330) + return __mmc_set_signal_voltage(host, signal_voltage); + + /* + * If we cannot switch voltages, return failure so the caller + * can continue without UHS mode + */ + if (!host->ops->start_signal_voltage_switch) + return -EPERM; + if (!host->ops->card_busy) + pr_warn("%s: cannot verify signal voltage switch\n", + mmc_hostname(host)); + + mmc_host_clk_hold(host); + + cmd.opcode = SD_SWITCH_VOLTAGE; + cmd.arg = 0; + cmd.flags = MMC_RSP_R1 | MMC_CMD_AC; + + err = mmc_wait_for_cmd(host, &cmd, 0); + if (err) + goto err_command; + + if (!mmc_host_is_spi(host) && (cmd.resp[0] & R1_ERROR)) { + err = -EIO; + goto err_command; + } + /* + * The card should drive cmd and dat[0:3] low immediately + * after the response of cmd11, but wait 1 ms to be sure + */ + mmc_delay(1); + if (host->ops->card_busy && !host->ops->card_busy(host)) { + err = -EAGAIN; + goto power_cycle; + } + /* + * During a signal voltage level switch, the clock must be gated + * for 5 ms according to the SD spec + */ + clock = host->ios.clock; + host->ios.clock = 0; + mmc_set_ios(host); + + if (__mmc_set_signal_voltage(host, signal_voltage)) { + /* + * Voltages may not have been switched, but we've already + * sent CMD11, so a power cycle is required anyway + */ + err = -EAGAIN; + goto power_cycle; + } + + /* Keep clock gated for at least 5 ms */ + mmc_delay(5); + host->ios.clock = clock; + mmc_set_ios(host); + + /* Wait for at least 1 ms according to spec */ + mmc_delay(1); + + /* + * Failure to switch is indicated by the card holding + * dat[0:3] low + */ + if (host->ops->card_busy && host->ops->card_busy(host)) + err = -EAGAIN; + +power_cycle: + if (err) { + pr_debug("%s: Signal voltage switch failed, " + "power cycling card\n", mmc_hostname(host)); + mmc_power_cycle(host, ocr); + } + +err_command: + mmc_host_clk_release(host); + + return err; +} + +/* + * Select timing parameters for host. + */ +void mmc_set_timing(struct mmc_host *host, unsigned int timing) +{ + mmc_host_clk_hold(host); + host->ios.timing = timing; + mmc_set_ios(host); + mmc_host_clk_release(host); +} + +/* + * Select appropriate driver type for host. + */ +void mmc_set_driver_type(struct mmc_host *host, unsigned int drv_type) +{ + mmc_host_clk_hold(host); + host->ios.drv_type = drv_type; + mmc_set_ios(host); + mmc_host_clk_release(host); +} + +/* + * Apply power to the MMC stack. This is a two-stage process. + * First, we enable power to the card without the clock running. + * We then wait a bit for the power to stabilise. Finally, + * enable the bus drivers and clock to the card. + * + * We must _NOT_ enable the clock prior to power stablising. + * + * If a host does all the power sequencing itself, ignore the + * initial MMC_POWER_UP stage. + */ +void mmc_power_up(struct mmc_host *host, u32 ocr) +{ + if (host->ios.power_mode == MMC_POWER_ON) + return; + + mmc_host_clk_hold(host); + + mmc_pwrseq_pre_power_on(host); + + host->ios.vdd = fls(ocr) - 1; + host->ios.power_mode = MMC_POWER_UP; + /* Set initial state and call mmc_set_ios */ + mmc_set_initial_state(host); + + /* Try to set signal voltage to 3.3V but fall back to 1.8v or 1.2v */ + if (__mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330) == 0) + dev_dbg(mmc_dev(host), "Initial signal voltage of 3.3v\n"); + else if (__mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180) == 0) + dev_dbg(mmc_dev(host), "Initial signal voltage of 1.8v\n"); + else if (__mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120) == 0) + dev_dbg(mmc_dev(host), "Initial signal voltage of 1.2v\n"); + + /* + * This delay should be sufficient to allow the power supply + * to reach the minimum voltage. + */ + mmc_delay(10); + + mmc_pwrseq_post_power_on(host); + + host->ios.clock = host->f_init; + + host->ios.power_mode = MMC_POWER_ON; + mmc_set_ios(host); + + /* + * This delay must be at least 74 clock sizes, or 1 ms, or the + * time required to reach a stable voltage. + */ + mmc_delay(10); + + mmc_host_clk_release(host); +} + +void mmc_power_off(struct mmc_host *host) +{ + if (host->ios.power_mode == MMC_POWER_OFF) + return; + + mmc_host_clk_hold(host); + + mmc_pwrseq_power_off(host); + + host->ios.clock = 0; + host->ios.vdd = 0; + + host->ios.power_mode = MMC_POWER_OFF; + /* Set initial state and call mmc_set_ios */ + mmc_set_initial_state(host); + + /* + * Some configurations, such as the 802.11 SDIO card in the OLPC + * XO-1.5, require a short delay after poweroff before the card + * can be successfully turned on again. + */ + mmc_delay(1); + + mmc_host_clk_release(host); +} + +void mmc_power_cycle(struct mmc_host *host, u32 ocr) +{ + mmc_power_off(host); + /* Wait at least 1 ms according to SD spec */ + mmc_delay(1); + mmc_power_up(host, ocr); +} + +/* + * Cleanup when the last reference to the bus operator is dropped. + */ +static void __mmc_release_bus(struct mmc_host *host) +{ + BUG_ON(!host); + BUG_ON(host->bus_refs); + BUG_ON(!host->bus_dead); + + host->bus_ops = NULL; +} + +/* + * Increase reference count of bus operator + */ +static inline void mmc_bus_get(struct mmc_host *host) +{ + unsigned long flags; + + spin_lock_irqsave(&host->lock, flags); + host->bus_refs++; + spin_unlock_irqrestore(&host->lock, flags); +} + +/* + * Decrease reference count of bus operator and free it if + * it is the last reference. + */ +static inline void mmc_bus_put(struct mmc_host *host) +{ + unsigned long flags; + + spin_lock_irqsave(&host->lock, flags); + host->bus_refs--; + if ((host->bus_refs == 0) && host->bus_ops) + __mmc_release_bus(host); + spin_unlock_irqrestore(&host->lock, flags); +} + +/* + * Assign a mmc bus handler to a host. Only one bus handler may control a + * host at any given time. + */ +void mmc_attach_bus(struct mmc_host *host, const struct mmc_bus_ops *ops) +{ + unsigned long flags; + + BUG_ON(!host); + BUG_ON(!ops); + + WARN_ON(!host->claimed); + + spin_lock_irqsave(&host->lock, flags); + + BUG_ON(host->bus_ops); + BUG_ON(host->bus_refs); + + host->bus_ops = ops; + host->bus_refs = 1; + host->bus_dead = 0; + + spin_unlock_irqrestore(&host->lock, flags); +} + +/* + * Remove the current bus handler from a host. + */ +void mmc_detach_bus(struct mmc_host *host) +{ + unsigned long flags; + + BUG_ON(!host); + + WARN_ON(!host->claimed); + WARN_ON(!host->bus_ops); + + spin_lock_irqsave(&host->lock, flags); + + host->bus_dead = 1; + + spin_unlock_irqrestore(&host->lock, flags); + + mmc_bus_put(host); +} + +static void _mmc_detect_change(struct mmc_host *host, unsigned long delay, + bool cd_irq) +{ +#ifdef CONFIG_MMC_DEBUG + unsigned long flags; + spin_lock_irqsave(&host->lock, flags); + WARN_ON(host->removed); + spin_unlock_irqrestore(&host->lock, flags); +#endif + + /* + * If the device is configured as wakeup, we prevent a new sleep for + * 5 s to give provision for user space to consume the event. + */ + if (cd_irq && !(host->caps & MMC_CAP_NEEDS_POLL) && + device_can_wakeup(mmc_dev(host))) + pm_wakeup_event(mmc_dev(host), 5000); + + host->detect_change = 1; + mmc_schedule_delayed_work(&host->detect, delay); +} + +/** + * mmc_detect_change - process change of state on a MMC socket + * @host: host which changed state. + * @delay: optional delay to wait before detection (jiffies) + * + * MMC drivers should call this when they detect a card has been + * inserted or removed. The MMC layer will confirm that any + * present card is still functional, and initialize any newly + * inserted. + */ +void mmc_detect_change(struct mmc_host *host, unsigned long delay) +{ + _mmc_detect_change(host, delay, true); +} +EXPORT_SYMBOL(mmc_detect_change); + +void mmc_init_erase(struct mmc_card *card) +{ + unsigned int sz; + + if (is_power_of_2(card->erase_size)) + card->erase_shift = ffs(card->erase_size) - 1; + else + card->erase_shift = 0; + + /* + * It is possible to erase an arbitrarily large area of an SD or MMC + * card. That is not desirable because it can take a long time + * (minutes) potentially delaying more important I/O, and also the + * timeout calculations become increasingly hugely over-estimated. + * Consequently, 'pref_erase' is defined as a guide to limit erases + * to that size and alignment. + * + * For SD cards that define Allocation Unit size, limit erases to one + * Allocation Unit at a time. For MMC cards that define High Capacity + * Erase Size, whether it is switched on or not, limit to that size. + * Otherwise just have a stab at a good value. For modern cards it + * will end up being 4MiB. Note that if the value is too small, it + * can end up taking longer to erase. + */ + if (mmc_card_sd(card) && card->ssr.au) { + card->pref_erase = card->ssr.au; + card->erase_shift = ffs(card->ssr.au) - 1; + } else if (card->ext_csd.hc_erase_size) { + card->pref_erase = card->ext_csd.hc_erase_size; + } else if (card->erase_size) { + sz = (card->csd.capacity << (card->csd.read_blkbits - 9)) >> 11; + if (sz < 128) + card->pref_erase = 512 * 1024 / 512; + else if (sz < 512) + card->pref_erase = 1024 * 1024 / 512; + else if (sz < 1024) + card->pref_erase = 2 * 1024 * 1024 / 512; + else + card->pref_erase = 4 * 1024 * 1024 / 512; + if (card->pref_erase < card->erase_size) + card->pref_erase = card->erase_size; + else { + sz = card->pref_erase % card->erase_size; + if (sz) + card->pref_erase += card->erase_size - sz; + } + } else + card->pref_erase = 0; +} + +static unsigned int mmc_mmc_erase_timeout(struct mmc_card *card, + unsigned int arg, unsigned int qty) +{ + unsigned int erase_timeout; + + if (arg == MMC_DISCARD_ARG || + (arg == MMC_TRIM_ARG && card->ext_csd.rev >= 6)) { + erase_timeout = card->ext_csd.trim_timeout; + } else if (card->ext_csd.erase_group_def & 1) { + /* High Capacity Erase Group Size uses HC timeouts */ + if (arg == MMC_TRIM_ARG) + erase_timeout = card->ext_csd.trim_timeout; + else + erase_timeout = card->ext_csd.hc_erase_timeout; + } else { + /* CSD Erase Group Size uses write timeout */ + unsigned int mult = (10 << card->csd.r2w_factor); + unsigned int timeout_clks = card->csd.tacc_clks * mult; + unsigned int timeout_us; + + /* Avoid overflow: e.g. tacc_ns=80000000 mult=1280 */ + if (card->csd.tacc_ns < 1000000) + timeout_us = (card->csd.tacc_ns * mult) / 1000; + else + timeout_us = (card->csd.tacc_ns / 1000) * mult; + + /* + * ios.clock is only a target. The real clock rate might be + * less but not that much less, so fudge it by multiplying by 2. + */ + timeout_clks <<= 1; + timeout_us += (timeout_clks * 1000) / + (mmc_host_clk_rate(card->host) / 1000); + + erase_timeout = timeout_us / 1000; + + /* + * Theoretically, the calculation could underflow so round up + * to 1ms in that case. + */ + if (!erase_timeout) + erase_timeout = 1; + } + + /* Multiplier for secure operations */ + if (arg & MMC_SECURE_ARGS) { + if (arg == MMC_SECURE_ERASE_ARG) + erase_timeout *= card->ext_csd.sec_erase_mult; + else + erase_timeout *= card->ext_csd.sec_trim_mult; + } + + erase_timeout *= qty; + + /* + * Ensure at least a 1 second timeout for SPI as per + * 'mmc_set_data_timeout()' + */ + if (mmc_host_is_spi(card->host) && erase_timeout < 1000) + erase_timeout = 1000; + + return erase_timeout; +} + +static unsigned int mmc_sd_erase_timeout(struct mmc_card *card, + unsigned int arg, + unsigned int qty) +{ + unsigned int erase_timeout; + + if (card->ssr.erase_timeout) { + /* Erase timeout specified in SD Status Register (SSR) */ + erase_timeout = card->ssr.erase_timeout * qty + + card->ssr.erase_offset; + } else { + /* + * Erase timeout not specified in SD Status Register (SSR) so + * use 250ms per write block. + */ + erase_timeout = 250 * qty; + } + + /* Must not be less than 1 second */ + if (erase_timeout < 1000) + erase_timeout = 1000; + + return erase_timeout; +} + +static unsigned int mmc_erase_timeout(struct mmc_card *card, + unsigned int arg, + unsigned int qty) +{ + if (mmc_card_sd(card)) + return mmc_sd_erase_timeout(card, arg, qty); + else + return mmc_mmc_erase_timeout(card, arg, qty); +} + +static int mmc_do_erase(struct mmc_card *card, unsigned int from, + unsigned int to, unsigned int arg) +{ + struct mmc_command cmd = {0}; + unsigned int qty = 0; + unsigned long timeout; + int err; + + /* + * qty is used to calculate the erase timeout which depends on how many + * erase groups (or allocation units in SD terminology) are affected. + * We count erasing part of an erase group as one erase group. + * For SD, the allocation units are always a power of 2. For MMC, the + * erase group size is almost certainly also power of 2, but it does not + * seem to insist on that in the JEDEC standard, so we fall back to + * division in that case. SD may not specify an allocation unit size, + * in which case the timeout is based on the number of write blocks. + * + * Note that the timeout for secure trim 2 will only be correct if the + * number of erase groups specified is the same as the total of all + * preceding secure trim 1 commands. Since the power may have been + * lost since the secure trim 1 commands occurred, it is generally + * impossible to calculate the secure trim 2 timeout correctly. + */ + if (card->erase_shift) + qty += ((to >> card->erase_shift) - + (from >> card->erase_shift)) + 1; + else if (mmc_card_sd(card)) + qty += to - from + 1; + else + qty += ((to / card->erase_size) - + (from / card->erase_size)) + 1; + + if (!mmc_card_blockaddr(card)) { + from <<= 9; + to <<= 9; + } + + if (mmc_card_sd(card)) + cmd.opcode = SD_ERASE_WR_BLK_START; + else + cmd.opcode = MMC_ERASE_GROUP_START; + cmd.arg = from; + cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC; + err = mmc_wait_for_cmd(card->host, &cmd, 0); + if (err) { + pr_err("mmc_erase: group start error %d, " + "status %#x\n", err, cmd.resp[0]); + err = -EIO; + goto out; + } + + memset(&cmd, 0, sizeof(struct mmc_command)); + if (mmc_card_sd(card)) + cmd.opcode = SD_ERASE_WR_BLK_END; + else + cmd.opcode = MMC_ERASE_GROUP_END; + cmd.arg = to; + cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC; + err = mmc_wait_for_cmd(card->host, &cmd, 0); + if (err) { + pr_err("mmc_erase: group end error %d, status %#x\n", + err, cmd.resp[0]); + err = -EIO; + goto out; + } + + memset(&cmd, 0, sizeof(struct mmc_command)); + cmd.opcode = MMC_ERASE; + cmd.arg = arg; + cmd.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC; + cmd.busy_timeout = mmc_erase_timeout(card, arg, qty); + err = mmc_wait_for_cmd(card->host, &cmd, 0); + if (err) { + pr_err("mmc_erase: erase error %d, status %#x\n", + err, cmd.resp[0]); + err = -EIO; + goto out; + } + + if (mmc_host_is_spi(card->host)) + goto out; + + timeout = jiffies + msecs_to_jiffies(MMC_CORE_TIMEOUT_MS); + do { + memset(&cmd, 0, sizeof(struct mmc_command)); + cmd.opcode = MMC_SEND_STATUS; + cmd.arg = card->rca << 16; + cmd.flags = MMC_RSP_R1 | MMC_CMD_AC; + /* Do not retry else we can't see errors */ + err = mmc_wait_for_cmd(card->host, &cmd, 0); + if (err || (cmd.resp[0] & 0xFDF92000)) { + pr_err("error %d requesting status %#x\n", + err, cmd.resp[0]); + err = -EIO; + goto out; + } + + /* Timeout if the device never becomes ready for data and + * never leaves the program state. + */ + if (time_after(jiffies, timeout)) { + pr_err("%s: Card stuck in programming state! %s\n", + mmc_hostname(card->host), __func__); + err = -EIO; + goto out; + } + + } while (!(cmd.resp[0] & R1_READY_FOR_DATA) || + (R1_CURRENT_STATE(cmd.resp[0]) == R1_STATE_PRG)); +out: + return err; +} + +/** + * mmc_erase - erase sectors. + * @card: card to erase + * @from: first sector to erase + * @nr: number of sectors to erase + * @arg: erase command argument (SD supports only %MMC_ERASE_ARG) + * + * Caller must claim host before calling this function. + */ +int mmc_erase(struct mmc_card *card, unsigned int from, unsigned int nr, + unsigned int arg) +{ + unsigned int rem, to = from + nr; + + if (!(card->host->caps & MMC_CAP_ERASE) || + !(card->csd.cmdclass & CCC_ERASE)) + return -EOPNOTSUPP; + + if (!card->erase_size) + return -EOPNOTSUPP; + + if (mmc_card_sd(card) && arg != MMC_ERASE_ARG) + return -EOPNOTSUPP; + + if ((arg & MMC_SECURE_ARGS) && + !(card->ext_csd.sec_feature_support & EXT_CSD_SEC_ER_EN)) + return -EOPNOTSUPP; + + if ((arg & MMC_TRIM_ARGS) && + !(card->ext_csd.sec_feature_support & EXT_CSD_SEC_GB_CL_EN)) + return -EOPNOTSUPP; + + if (arg == MMC_SECURE_ERASE_ARG) { + if (from % card->erase_size || nr % card->erase_size) + return -EINVAL; + } + + if (arg == MMC_ERASE_ARG) { + rem = from % card->erase_size; + if (rem) { + rem = card->erase_size - rem; + from += rem; + if (nr > rem) + nr -= rem; + else + return 0; + } + rem = nr % card->erase_size; + if (rem) + nr -= rem; + } + + if (nr == 0) + return 0; + + to = from + nr; + + if (to <= from) + return -EINVAL; + + /* 'from' and 'to' are inclusive */ + to -= 1; + + return mmc_do_erase(card, from, to, arg); +} +EXPORT_SYMBOL(mmc_erase); + +int mmc_can_erase(struct mmc_card *card) +{ + if ((card->host->caps & MMC_CAP_ERASE) && + (card->csd.cmdclass & CCC_ERASE) && card->erase_size) + return 1; + return 0; +} +EXPORT_SYMBOL(mmc_can_erase); + +int mmc_can_trim(struct mmc_card *card) +{ + if (card->ext_csd.sec_feature_support & EXT_CSD_SEC_GB_CL_EN) + return 1; + return 0; +} +EXPORT_SYMBOL(mmc_can_trim); + +int mmc_can_discard(struct mmc_card *card) +{ + /* + * As there's no way to detect the discard support bit at v4.5 + * use the s/w feature support filed. + */ + if (card->ext_csd.feature_support & MMC_DISCARD_FEATURE) + return 1; + return 0; +} +EXPORT_SYMBOL(mmc_can_discard); + +int mmc_can_sanitize(struct mmc_card *card) +{ + if (!mmc_can_trim(card) && !mmc_can_erase(card)) + return 0; + if (card->ext_csd.sec_feature_support & EXT_CSD_SEC_SANITIZE) + return 1; + return 0; +} +EXPORT_SYMBOL(mmc_can_sanitize); + +int mmc_can_secure_erase_trim(struct mmc_card *card) +{ + if ((card->ext_csd.sec_feature_support & EXT_CSD_SEC_ER_EN) && + !(card->quirks & MMC_QUIRK_SEC_ERASE_TRIM_BROKEN)) + return 1; + return 0; +} +EXPORT_SYMBOL(mmc_can_secure_erase_trim); + +int mmc_erase_group_aligned(struct mmc_card *card, unsigned int from, + unsigned int nr) +{ + if (!card->erase_size) + return 0; + if (from % card->erase_size || nr % card->erase_size) + return 0; + return 1; +} +EXPORT_SYMBOL(mmc_erase_group_aligned); + +static unsigned int mmc_do_calc_max_discard(struct mmc_card *card, + unsigned int arg) +{ + struct mmc_host *host = card->host; + unsigned int max_discard, x, y, qty = 0, max_qty, timeout; + unsigned int last_timeout = 0; + + if (card->erase_shift) + max_qty = UINT_MAX >> card->erase_shift; + else if (mmc_card_sd(card)) + max_qty = UINT_MAX; + else + max_qty = UINT_MAX / card->erase_size; + + /* Find the largest qty with an OK timeout */ + do { + y = 0; + for (x = 1; x && x <= max_qty && max_qty - x >= qty; x <<= 1) { + timeout = mmc_erase_timeout(card, arg, qty + x); + if (timeout > host->max_busy_timeout) + break; + if (timeout < last_timeout) + break; + last_timeout = timeout; + y = x; + } + qty += y; + } while (y); + + if (!qty) + return 0; + + if (qty == 1) + return 1; + + /* Convert qty to sectors */ + if (card->erase_shift) + max_discard = --qty << card->erase_shift; + else if (mmc_card_sd(card)) + max_discard = qty; + else + max_discard = --qty * card->erase_size; + + return max_discard; +} + +unsigned int mmc_calc_max_discard(struct mmc_card *card) +{ + struct mmc_host *host = card->host; + unsigned int max_discard, max_trim; + + if (!host->max_busy_timeout) + return UINT_MAX; + + /* + * Without erase_group_def set, MMC erase timeout depends on clock + * frequence which can change. In that case, the best choice is + * just the preferred erase size. + */ + if (mmc_card_mmc(card) && !(card->ext_csd.erase_group_def & 1)) + return card->pref_erase; + + max_discard = mmc_do_calc_max_discard(card, MMC_ERASE_ARG); + if (mmc_can_trim(card)) { + max_trim = mmc_do_calc_max_discard(card, MMC_TRIM_ARG); + if (max_trim < max_discard) + max_discard = max_trim; + } else if (max_discard < card->erase_size) { + max_discard = 0; + } + pr_debug("%s: calculated max. discard sectors %u for timeout %u ms\n", + mmc_hostname(host), max_discard, host->max_busy_timeout); + return max_discard; +} +EXPORT_SYMBOL(mmc_calc_max_discard); + +int mmc_set_blocklen(struct mmc_card *card, unsigned int blocklen) +{ + struct mmc_command cmd = {0}; + + if (mmc_card_blockaddr(card) || mmc_card_ddr52(card)) + return 0; + + cmd.opcode = MMC_SET_BLOCKLEN; + cmd.arg = blocklen; + cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC; + return mmc_wait_for_cmd(card->host, &cmd, 5); +} +EXPORT_SYMBOL(mmc_set_blocklen); + +int mmc_set_blockcount(struct mmc_card *card, unsigned int blockcount, + bool is_rel_write) +{ + struct mmc_command cmd = {0}; + + cmd.opcode = MMC_SET_BLOCK_COUNT; + cmd.arg = blockcount & 0x0000FFFF; + if (is_rel_write) + cmd.arg |= 1 << 31; + cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC; + return mmc_wait_for_cmd(card->host, &cmd, 5); +} +EXPORT_SYMBOL(mmc_set_blockcount); + +static void mmc_hw_reset_for_init(struct mmc_host *host) +{ + if (!(host->caps & MMC_CAP_HW_RESET) || !host->ops->hw_reset) + return; + mmc_host_clk_hold(host); + host->ops->hw_reset(host); + mmc_host_clk_release(host); +} + +int mmc_hw_reset(struct mmc_host *host) +{ + int ret; + + if (!host->card) + return -EINVAL; + + mmc_bus_get(host); + if (!host->bus_ops || host->bus_dead || !host->bus_ops->reset) { + mmc_bus_put(host); + return -EOPNOTSUPP; + } + + ret = host->bus_ops->reset(host); + mmc_bus_put(host); + + pr_warn("%s: tried to reset card\n", mmc_hostname(host)); + + return ret; +} +EXPORT_SYMBOL(mmc_hw_reset); + +static int mmc_rescan_try_freq(struct mmc_host *host, unsigned freq) +{ + host->f_init = freq; + +#ifdef CONFIG_MMC_DEBUG + pr_info("%s: %s: trying to init card at %u Hz\n", + mmc_hostname(host), __func__, host->f_init); +#endif + mmc_power_up(host, host->ocr_avail); + + /* + * Some eMMCs (with VCCQ always on) may not be reset after power up, so + * do a hardware reset if possible. + */ + mmc_hw_reset_for_init(host); + + /* + * sdio_reset sends CMD52 to reset card. Since we do not know + * if the card is being re-initialized, just send it. CMD52 + * should be ignored by SD/eMMC cards. + */ + sdio_reset(host); + mmc_go_idle(host); + + mmc_send_if_cond(host, host->ocr_avail); + + /* Order's important: probe SDIO, then SD, then MMC */ + if (!mmc_attach_sdio(host)) + return 0; + if (!mmc_attach_sd(host)) + return 0; + if (!mmc_attach_mmc(host)) + return 0; + + mmc_power_off(host); + return -EIO; +} + +int _mmc_detect_card_removed(struct mmc_host *host) +{ + int ret; + + if (host->caps & MMC_CAP_NONREMOVABLE) + return 0; + + if (!host->card || mmc_card_removed(host->card)) + return 1; + + ret = host->bus_ops->alive(host); + + /* + * Card detect status and alive check may be out of sync if card is + * removed slowly, when card detect switch changes while card/slot + * pads are still contacted in hardware (refer to "SD Card Mechanical + * Addendum, Appendix C: Card Detection Switch"). So reschedule a + * detect work 200ms later for this case. + */ + if (!ret && host->ops->get_cd && !host->ops->get_cd(host)) { + mmc_detect_change(host, msecs_to_jiffies(200)); + pr_debug("%s: card removed too slowly\n", mmc_hostname(host)); + } + + if (ret) { + mmc_card_set_removed(host->card); + pr_debug("%s: card remove detected\n", mmc_hostname(host)); + } + + return ret; +} + +int mmc_detect_card_removed(struct mmc_host *host) +{ + struct mmc_card *card = host->card; + int ret; + + WARN_ON(!host->claimed); + + if (!card) + return 1; + + ret = mmc_card_removed(card); + /* + * The card will be considered unchanged unless we have been asked to + * detect a change or host requires polling to provide card detection. + */ + if (!host->detect_change && !(host->caps & MMC_CAP_NEEDS_POLL)) + return ret; + + host->detect_change = 0; + if (!ret) { + ret = _mmc_detect_card_removed(host); + if (ret && (host->caps & MMC_CAP_NEEDS_POLL)) { + /* + * Schedule a detect work as soon as possible to let a + * rescan handle the card removal. + */ + cancel_delayed_work(&host->detect); + _mmc_detect_change(host, 0, false); + } + } + + return ret; +} +EXPORT_SYMBOL(mmc_detect_card_removed); + +void mmc_rescan(struct work_struct *work) +{ + struct mmc_host *host = + container_of(work, struct mmc_host, detect.work); + int i; + + if (host->trigger_card_event && host->ops->card_event) { + host->ops->card_event(host); + host->trigger_card_event = false; + } + + if (host->rescan_disable) + return; + + /* If there is a non-removable card registered, only scan once */ + if ((host->caps & MMC_CAP_NONREMOVABLE) && host->rescan_entered) + return; + host->rescan_entered = 1; + + mmc_bus_get(host); + + /* + * if there is a _removable_ card registered, check whether it is + * still present + */ + if (host->bus_ops && !host->bus_dead + && !(host->caps & MMC_CAP_NONREMOVABLE)) + host->bus_ops->detect(host); + + host->detect_change = 0; + + /* + * Let mmc_bus_put() free the bus/bus_ops if we've found that + * the card is no longer present. + */ + mmc_bus_put(host); + mmc_bus_get(host); + + /* if there still is a card present, stop here */ + if (host->bus_ops != NULL) { + mmc_bus_put(host); + goto out; + } + + /* + * Only we can add a new handler, so it's safe to + * release the lock here. + */ + mmc_bus_put(host); + + if (!(host->caps & MMC_CAP_NONREMOVABLE) && host->ops->get_cd && + host->ops->get_cd(host) == 0) { + mmc_claim_host(host); + mmc_power_off(host); + mmc_release_host(host); + goto out; + } + + mmc_claim_host(host); + for (i = 0; i < ARRAY_SIZE(freqs); i++) { + if (!mmc_rescan_try_freq(host, max(freqs[i], host->f_min))) + break; + if (freqs[i] <= host->f_min) + break; + } + mmc_release_host(host); + + out: + if (host->caps & MMC_CAP_NEEDS_POLL) + mmc_schedule_delayed_work(&host->detect, HZ); +} + +void mmc_start_host(struct mmc_host *host) +{ + host->f_init = max(freqs[0], host->f_min); + host->rescan_disable = 0; + host->ios.power_mode = MMC_POWER_UNDEFINED; + if (host->caps2 & MMC_CAP2_NO_PRESCAN_POWERUP) + mmc_power_off(host); + else + mmc_power_up(host, host->ocr_avail); + mmc_gpiod_request_cd_irq(host); + _mmc_detect_change(host, 0, false); +} + +void mmc_stop_host(struct mmc_host *host) +{ +#ifdef CONFIG_MMC_DEBUG + unsigned long flags; + spin_lock_irqsave(&host->lock, flags); + host->removed = 1; + spin_unlock_irqrestore(&host->lock, flags); +#endif + if (host->slot.cd_irq >= 0) + disable_irq(host->slot.cd_irq); + + host->rescan_disable = 1; + cancel_delayed_work_sync(&host->detect); + mmc_flush_scheduled_work(); + + /* clear pm flags now and let card drivers set them as needed */ + host->pm_flags = 0; + + mmc_bus_get(host); + if (host->bus_ops && !host->bus_dead) { + /* Calling bus_ops->remove() with a claimed host can deadlock */ + host->bus_ops->remove(host); + mmc_claim_host(host); + mmc_detach_bus(host); + mmc_power_off(host); + mmc_release_host(host); + mmc_bus_put(host); + return; + } + mmc_bus_put(host); + + BUG_ON(host->card); + + mmc_power_off(host); +} + +int mmc_power_save_host(struct mmc_host *host) +{ + int ret = 0; + +#ifdef CONFIG_MMC_DEBUG + pr_info("%s: %s: powering down\n", mmc_hostname(host), __func__); +#endif + + mmc_bus_get(host); + + if (!host->bus_ops || host->bus_dead) { + mmc_bus_put(host); + return -EINVAL; + } + + if (host->bus_ops->power_save) + ret = host->bus_ops->power_save(host); + + mmc_bus_put(host); + + mmc_power_off(host); + + return ret; +} +EXPORT_SYMBOL(mmc_power_save_host); + +int mmc_power_restore_host(struct mmc_host *host) +{ + int ret; + +#ifdef CONFIG_MMC_DEBUG + pr_info("%s: %s: powering up\n", mmc_hostname(host), __func__); +#endif + + mmc_bus_get(host); + + if (!host->bus_ops || host->bus_dead) { + mmc_bus_put(host); + return -EINVAL; + } + + mmc_power_up(host, host->card->ocr); + ret = host->bus_ops->power_restore(host); + + mmc_bus_put(host); + + return ret; +} +EXPORT_SYMBOL(mmc_power_restore_host); + +/* + * Flush the cache to the non-volatile storage. + */ +int mmc_flush_cache(struct mmc_card *card) +{ + int err = 0; + + if (mmc_card_mmc(card) && + (card->ext_csd.cache_size > 0) && + (card->ext_csd.cache_ctrl & 1)) { + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_FLUSH_CACHE, 1, 0); + if (err) + pr_err("%s: cache flush error %d\n", + mmc_hostname(card->host), err); + } + + return err; +} +EXPORT_SYMBOL(mmc_flush_cache); + +#ifdef CONFIG_PM + +/* Do the card removal on suspend if card is assumed removeable + * Do that in pm notifier while userspace isn't yet frozen, so we will be able + to sync the card. +*/ +int mmc_pm_notify(struct notifier_block *notify_block, + unsigned long mode, void *unused) +{ + struct mmc_host *host = container_of( + notify_block, struct mmc_host, pm_notify); + unsigned long flags; + int err = 0; + + switch (mode) { + case PM_HIBERNATION_PREPARE: + case PM_SUSPEND_PREPARE: + case PM_RESTORE_PREPARE: + spin_lock_irqsave(&host->lock, flags); + host->rescan_disable = 1; + spin_unlock_irqrestore(&host->lock, flags); + cancel_delayed_work_sync(&host->detect); + + if (!host->bus_ops) + break; + + /* Validate prerequisites for suspend */ + if (host->bus_ops->pre_suspend) + err = host->bus_ops->pre_suspend(host); + if (!err) + break; + + /* Calling bus_ops->remove() with a claimed host can deadlock */ + host->bus_ops->remove(host); + mmc_claim_host(host); + mmc_detach_bus(host); + mmc_power_off(host); + mmc_release_host(host); + host->pm_flags = 0; + break; + + case PM_POST_SUSPEND: + case PM_POST_HIBERNATION: + case PM_POST_RESTORE: + + spin_lock_irqsave(&host->lock, flags); + host->rescan_disable = 0; + spin_unlock_irqrestore(&host->lock, flags); + _mmc_detect_change(host, 0, false); + + } + + return 0; +} +#endif + +/** + * mmc_init_context_info() - init synchronization context + * @host: mmc host + * + * Init struct context_info needed to implement asynchronous + * request mechanism, used by mmc core, host driver and mmc requests + * supplier. + */ +void mmc_init_context_info(struct mmc_host *host) +{ + spin_lock_init(&host->context_info.lock); + host->context_info.is_new_req = false; + host->context_info.is_done_rcv = false; + host->context_info.is_waiting_last_req = false; + init_waitqueue_head(&host->context_info.wait); +} + +static int __init mmc_init(void) +{ + int ret; + + workqueue = alloc_ordered_workqueue("kmmcd", 0); + if (!workqueue) + return -ENOMEM; + + ret = mmc_register_bus(); + if (ret) + goto destroy_workqueue; + + ret = mmc_register_host_class(); + if (ret) + goto unregister_bus; + + ret = sdio_register_bus(); + if (ret) + goto unregister_host_class; + + return 0; + +unregister_host_class: + mmc_unregister_host_class(); +unregister_bus: + mmc_unregister_bus(); +destroy_workqueue: + destroy_workqueue(workqueue); + + return ret; +} + +static void __exit mmc_exit(void) +{ + sdio_unregister_bus(); + mmc_unregister_host_class(); + mmc_unregister_bus(); + destroy_workqueue(workqueue); +} + +subsys_initcall(mmc_init); +module_exit(mmc_exit); + +MODULE_LICENSE("GPL"); |