summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/misc/carma
diff options
context:
space:
mode:
authorJosé Pekkarinen <jose.pekkarinen@nokia.com>2016-04-11 10:41:07 +0300
committerJosé Pekkarinen <jose.pekkarinen@nokia.com>2016-04-13 08:17:18 +0300
commite09b41010ba33a20a87472ee821fa407a5b8da36 (patch)
treed10dc367189862e7ca5c592f033dc3726e1df4e3 /kernel/drivers/misc/carma
parentf93b97fd65072de626c074dbe099a1fff05ce060 (diff)
These changes are the raw update to linux-4.4.6-rt14. Kernel sources
are taken from kernel.org, and rt patch from the rt wiki download page. During the rebasing, the following patch collided: Force tick interrupt and get rid of softirq magic(I70131fb85). Collisions have been removed because its logic was found on the source already. Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769 Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>
Diffstat (limited to 'kernel/drivers/misc/carma')
-rw-r--r--kernel/drivers/misc/carma/Kconfig15
-rw-r--r--kernel/drivers/misc/carma/Makefile2
-rw-r--r--kernel/drivers/misc/carma/carma-fpga-program.c1182
-rw-r--r--kernel/drivers/misc/carma/carma-fpga.c1507
4 files changed, 0 insertions, 2706 deletions
diff --git a/kernel/drivers/misc/carma/Kconfig b/kernel/drivers/misc/carma/Kconfig
deleted file mode 100644
index 295882bfb..000000000
--- a/kernel/drivers/misc/carma/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-config CARMA_FPGA
- tristate "CARMA DATA-FPGA Access Driver"
- depends on FSL_SOC && PPC_83xx && HAS_DMA && FSL_DMA
- default n
- help
- Say Y here to include support for communicating with the data
- processing FPGAs on the OVRO CARMA board.
-
-config CARMA_FPGA_PROGRAM
- tristate "CARMA DATA-FPGA Programmer"
- depends on FSL_SOC && PPC_83xx && HAS_DMA && FSL_DMA
- default n
- help
- Say Y here to include support for programming the data processing
- FPGAs on the OVRO CARMA board.
diff --git a/kernel/drivers/misc/carma/Makefile b/kernel/drivers/misc/carma/Makefile
deleted file mode 100644
index ff36ac2ce..000000000
--- a/kernel/drivers/misc/carma/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-obj-$(CONFIG_CARMA_FPGA) += carma-fpga.o
-obj-$(CONFIG_CARMA_FPGA_PROGRAM) += carma-fpga-program.o
diff --git a/kernel/drivers/misc/carma/carma-fpga-program.c b/kernel/drivers/misc/carma/carma-fpga-program.c
deleted file mode 100644
index 0b1bd85e4..000000000
--- a/kernel/drivers/misc/carma/carma-fpga-program.c
+++ /dev/null
@@ -1,1182 +0,0 @@
-/*
- * CARMA Board DATA-FPGA Programmer
- *
- * Copyright (c) 2009-2011 Ira W. Snyder <iws@ovro.caltech.edu>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/dma-mapping.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <linux/completion.h>
-#include <linux/miscdevice.h>
-#include <linux/dmaengine.h>
-#include <linux/fsldma.h>
-#include <linux/interrupt.h>
-#include <linux/highmem.h>
-#include <linux/vmalloc.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/leds.h>
-#include <linux/slab.h>
-#include <linux/kref.h>
-#include <linux/fs.h>
-#include <linux/io.h>
-
-/* MPC8349EMDS specific get_immrbase() */
-#include <sysdev/fsl_soc.h>
-
-static const char drv_name[] = "carma-fpga-program";
-
-/*
- * Firmware images are always this exact size
- *
- * 12849552 bytes for a CARMA Digitizer Board (EP2S90 FPGAs)
- * 18662880 bytes for a CARMA Correlator Board (EP2S130 FPGAs)
- */
-#define FW_SIZE_EP2S90 12849552
-#define FW_SIZE_EP2S130 18662880
-
-struct fpga_dev {
- struct miscdevice miscdev;
-
- /* Reference count */
- struct kref ref;
-
- /* Device Registers */
- struct device *dev;
- void __iomem *regs;
- void __iomem *immr;
-
- /* Freescale DMA Device */
- struct dma_chan *chan;
-
- /* Interrupts */
- int irq, status;
- struct completion completion;
-
- /* FPGA Bitfile */
- struct mutex lock;
-
- void *vaddr;
- struct scatterlist *sglist;
- int sglen;
- int nr_pages;
- bool buf_allocated;
-
- /* max size and written bytes */
- size_t fw_size;
- size_t bytes;
-};
-
-static int fpga_dma_init(struct fpga_dev *priv, int nr_pages)
-{
- struct page *pg;
- int i;
-
- priv->vaddr = vmalloc_32(nr_pages << PAGE_SHIFT);
- if (NULL == priv->vaddr) {
- pr_debug("vmalloc_32(%d pages) failed\n", nr_pages);
- return -ENOMEM;
- }
-
- pr_debug("vmalloc is at addr 0x%08lx, size=%d\n",
- (unsigned long)priv->vaddr,
- nr_pages << PAGE_SHIFT);
-
- memset(priv->vaddr, 0, nr_pages << PAGE_SHIFT);
- priv->nr_pages = nr_pages;
-
- priv->sglist = vzalloc(priv->nr_pages * sizeof(*priv->sglist));
- if (NULL == priv->sglist)
- goto vzalloc_err;
-
- sg_init_table(priv->sglist, priv->nr_pages);
- for (i = 0; i < priv->nr_pages; i++) {
- pg = vmalloc_to_page(priv->vaddr + i * PAGE_SIZE);
- if (NULL == pg)
- goto vmalloc_to_page_err;
- sg_set_page(&priv->sglist[i], pg, PAGE_SIZE, 0);
- }
- return 0;
-
-vmalloc_to_page_err:
- vfree(priv->sglist);
- priv->sglist = NULL;
-vzalloc_err:
- vfree(priv->vaddr);
- priv->vaddr = NULL;
- return -ENOMEM;
-}
-
-static int fpga_dma_map(struct fpga_dev *priv)
-{
- priv->sglen = dma_map_sg(priv->dev, priv->sglist,
- priv->nr_pages, DMA_TO_DEVICE);
-
- if (0 == priv->sglen) {
- pr_warn("%s: dma_map_sg failed\n", __func__);
- return -ENOMEM;
- }
- return 0;
-}
-
-static int fpga_dma_unmap(struct fpga_dev *priv)
-{
- if (!priv->sglen)
- return 0;
-
- dma_unmap_sg(priv->dev, priv->sglist, priv->sglen, DMA_TO_DEVICE);
- priv->sglen = 0;
- return 0;
-}
-
-/*
- * FPGA Bitfile Helpers
- */
-
-/**
- * fpga_drop_firmware_data() - drop the bitfile image from memory
- * @priv: the driver's private data structure
- *
- * LOCKING: must hold priv->lock
- */
-static void fpga_drop_firmware_data(struct fpga_dev *priv)
-{
- vfree(priv->sglist);
- vfree(priv->vaddr);
- priv->buf_allocated = false;
- priv->bytes = 0;
-}
-
-/*
- * Private Data Reference Count
- */
-
-static void fpga_dev_remove(struct kref *ref)
-{
- struct fpga_dev *priv = container_of(ref, struct fpga_dev, ref);
-
- /* free any firmware image that was not programmed */
- fpga_drop_firmware_data(priv);
-
- mutex_destroy(&priv->lock);
- kfree(priv);
-}
-
-/*
- * LED Trigger (could be a seperate module)
- */
-
-/*
- * NOTE: this whole thing does have the problem that whenever the led's are
- * NOTE: first set to use the fpga trigger, they could be in the wrong state
- */
-
-DEFINE_LED_TRIGGER(ledtrig_fpga);
-
-static void ledtrig_fpga_programmed(bool enabled)
-{
- if (enabled)
- led_trigger_event(ledtrig_fpga, LED_FULL);
- else
- led_trigger_event(ledtrig_fpga, LED_OFF);
-}
-
-/*
- * FPGA Register Helpers
- */
-
-/* Register Definitions */
-#define FPGA_CONFIG_CONTROL 0x40
-#define FPGA_CONFIG_STATUS 0x44
-#define FPGA_CONFIG_FIFO_SIZE 0x48
-#define FPGA_CONFIG_FIFO_USED 0x4C
-#define FPGA_CONFIG_TOTAL_BYTE_COUNT 0x50
-#define FPGA_CONFIG_CUR_BYTE_COUNT 0x54
-
-#define FPGA_FIFO_ADDRESS 0x3000
-
-static int fpga_fifo_size(void __iomem *regs)
-{
- return ioread32be(regs + FPGA_CONFIG_FIFO_SIZE);
-}
-
-#define CFG_STATUS_ERR_MASK 0xfffe
-
-static int fpga_config_error(void __iomem *regs)
-{
- return ioread32be(regs + FPGA_CONFIG_STATUS) & CFG_STATUS_ERR_MASK;
-}
-
-static int fpga_fifo_empty(void __iomem *regs)
-{
- return ioread32be(regs + FPGA_CONFIG_FIFO_USED) == 0;
-}
-
-static void fpga_fifo_write(void __iomem *regs, u32 val)
-{
- iowrite32be(val, regs + FPGA_FIFO_ADDRESS);
-}
-
-static void fpga_set_byte_count(void __iomem *regs, u32 count)
-{
- iowrite32be(count, regs + FPGA_CONFIG_TOTAL_BYTE_COUNT);
-}
-
-#define CFG_CTL_ENABLE (1 << 0)
-#define CFG_CTL_RESET (1 << 1)
-#define CFG_CTL_DMA (1 << 2)
-
-static void fpga_programmer_enable(struct fpga_dev *priv, bool dma)
-{
- u32 val;
-
- val = (dma) ? (CFG_CTL_ENABLE | CFG_CTL_DMA) : CFG_CTL_ENABLE;
- iowrite32be(val, priv->regs + FPGA_CONFIG_CONTROL);
-}
-
-static void fpga_programmer_disable(struct fpga_dev *priv)
-{
- iowrite32be(0x0, priv->regs + FPGA_CONFIG_CONTROL);
-}
-
-static void fpga_dump_registers(struct fpga_dev *priv)
-{
- u32 control, status, size, used, total, curr;
-
- /* good status: do nothing */
- if (priv->status == 0)
- return;
-
- /* Dump all status registers */
- control = ioread32be(priv->regs + FPGA_CONFIG_CONTROL);
- status = ioread32be(priv->regs + FPGA_CONFIG_STATUS);
- size = ioread32be(priv->regs + FPGA_CONFIG_FIFO_SIZE);
- used = ioread32be(priv->regs + FPGA_CONFIG_FIFO_USED);
- total = ioread32be(priv->regs + FPGA_CONFIG_TOTAL_BYTE_COUNT);
- curr = ioread32be(priv->regs + FPGA_CONFIG_CUR_BYTE_COUNT);
-
- dev_err(priv->dev, "Configuration failed, dumping status registers\n");
- dev_err(priv->dev, "Control: 0x%.8x\n", control);
- dev_err(priv->dev, "Status: 0x%.8x\n", status);
- dev_err(priv->dev, "FIFO Size: 0x%.8x\n", size);
- dev_err(priv->dev, "FIFO Used: 0x%.8x\n", used);
- dev_err(priv->dev, "FIFO Total: 0x%.8x\n", total);
- dev_err(priv->dev, "FIFO Curr: 0x%.8x\n", curr);
-}
-
-/*
- * FPGA Power Supply Code
- */
-
-#define CTL_PWR_CONTROL 0x2006
-#define CTL_PWR_STATUS 0x200A
-#define CTL_PWR_FAIL 0x200B
-
-#define PWR_CONTROL_ENABLE 0x01
-
-#define PWR_STATUS_ERROR_MASK 0x10
-#define PWR_STATUS_GOOD 0x0f
-
-/*
- * Determine if the FPGA power is good for all supplies
- */
-static bool fpga_power_good(struct fpga_dev *priv)
-{
- u8 val;
-
- val = ioread8(priv->regs + CTL_PWR_STATUS);
- if (val & PWR_STATUS_ERROR_MASK)
- return false;
-
- return val == PWR_STATUS_GOOD;
-}
-
-/*
- * Disable the FPGA power supplies
- */
-static void fpga_disable_power_supplies(struct fpga_dev *priv)
-{
- unsigned long start;
- u8 val;
-
- iowrite8(0x0, priv->regs + CTL_PWR_CONTROL);
-
- /*
- * Wait 500ms for the power rails to discharge
- *
- * Without this delay, the CTL-CPLD state machine can get into a
- * state where it is waiting for the power-goods to assert, but they
- * never do. This only happens when enabling and disabling the
- * power sequencer very rapidly.
- *
- * The loop below will also wait for the power goods to de-assert,
- * but testing has shown that they are always disabled by the time
- * the sleep completes. However, omitting the sleep and only waiting
- * for the power-goods to de-assert was not sufficient to ensure
- * that the power sequencer would not wedge itself.
- */
- msleep(500);
-
- start = jiffies;
- while (time_before(jiffies, start + HZ)) {
- val = ioread8(priv->regs + CTL_PWR_STATUS);
- if (!(val & PWR_STATUS_GOOD))
- break;
-
- usleep_range(5000, 10000);
- }
-
- val = ioread8(priv->regs + CTL_PWR_STATUS);
- if (val & PWR_STATUS_GOOD) {
- dev_err(priv->dev, "power disable failed: "
- "power goods: status 0x%.2x\n", val);
- }
-
- if (val & PWR_STATUS_ERROR_MASK) {
- dev_err(priv->dev, "power disable failed: "
- "alarm bit set: status 0x%.2x\n", val);
- }
-}
-
-/**
- * fpga_enable_power_supplies() - enable the DATA-FPGA power supplies
- * @priv: the driver's private data structure
- *
- * Enable the DATA-FPGA power supplies, waiting up to 1 second for
- * them to enable successfully.
- *
- * Returns 0 on success, -ERRNO otherwise
- */
-static int fpga_enable_power_supplies(struct fpga_dev *priv)
-{
- unsigned long start = jiffies;
-
- if (fpga_power_good(priv)) {
- dev_dbg(priv->dev, "power was already good\n");
- return 0;
- }
-
- iowrite8(PWR_CONTROL_ENABLE, priv->regs + CTL_PWR_CONTROL);
- while (time_before(jiffies, start + HZ)) {
- if (fpga_power_good(priv))
- return 0;
-
- usleep_range(5000, 10000);
- }
-
- return fpga_power_good(priv) ? 0 : -ETIMEDOUT;
-}
-
-/*
- * Determine if the FPGA power supplies are all enabled
- */
-static bool fpga_power_enabled(struct fpga_dev *priv)
-{
- u8 val;
-
- val = ioread8(priv->regs + CTL_PWR_CONTROL);
- if (val & PWR_CONTROL_ENABLE)
- return true;
-
- return false;
-}
-
-/*
- * Determine if the FPGA's are programmed and running correctly
- */
-static bool fpga_running(struct fpga_dev *priv)
-{
- if (!fpga_power_good(priv))
- return false;
-
- /* Check the config done bit */
- return ioread32be(priv->regs + FPGA_CONFIG_STATUS) & (1 << 18);
-}
-
-/*
- * FPGA Programming Code
- */
-
-/**
- * fpga_program_block() - put a block of data into the programmer's FIFO
- * @priv: the driver's private data structure
- * @buf: the data to program
- * @count: the length of data to program (must be a multiple of 4 bytes)
- *
- * Returns 0 on success, -ERRNO otherwise
- */
-static int fpga_program_block(struct fpga_dev *priv, void *buf, size_t count)
-{
- u32 *data = buf;
- int size = fpga_fifo_size(priv->regs);
- int i, len;
- unsigned long timeout;
-
- /* enforce correct data length for the FIFO */
- BUG_ON(count % 4 != 0);
-
- while (count > 0) {
-
- /* Get the size of the block to write (maximum is FIFO_SIZE) */
- len = min_t(size_t, count, size);
- timeout = jiffies + HZ / 4;
-
- /* Write the block */
- for (i = 0; i < len / 4; i++)
- fpga_fifo_write(priv->regs, data[i]);
-
- /* Update the amounts left */
- count -= len;
- data += len / 4;
-
- /* Wait for the fifo to empty */
- while (true) {
-
- if (fpga_fifo_empty(priv->regs)) {
- break;
- } else {
- dev_dbg(priv->dev, "Fifo not empty\n");
- cpu_relax();
- }
-
- if (fpga_config_error(priv->regs)) {
- dev_err(priv->dev, "Error detected\n");
- return -EIO;
- }
-
- if (time_after(jiffies, timeout)) {
- dev_err(priv->dev, "Fifo drain timeout\n");
- return -ETIMEDOUT;
- }
-
- usleep_range(5000, 10000);
- }
- }
-
- return 0;
-}
-
-/**
- * fpga_program_cpu() - program the DATA-FPGA's using the CPU
- * @priv: the driver's private data structure
- *
- * This is useful when the DMA programming method fails. It is possible to
- * wedge the Freescale DMA controller such that the DMA programming method
- * always fails. This method has always succeeded.
- *
- * Returns 0 on success, -ERRNO otherwise
- */
-static noinline int fpga_program_cpu(struct fpga_dev *priv)
-{
- int ret;
- unsigned long timeout;
-
- /* Disable the programmer */
- fpga_programmer_disable(priv);
-
- /* Set the total byte count */
- fpga_set_byte_count(priv->regs, priv->bytes);
- dev_dbg(priv->dev, "total byte count %u bytes\n", priv->bytes);
-
- /* Enable the controller for programming */
- fpga_programmer_enable(priv, false);
- dev_dbg(priv->dev, "enabled the controller\n");
-
- /* Write each chunk of the FPGA bitfile to FPGA programmer */
- ret = fpga_program_block(priv, priv->vaddr, priv->bytes);
- if (ret)
- goto out_disable_controller;
-
- /* Wait for the interrupt handler to signal that programming finished */
- timeout = wait_for_completion_timeout(&priv->completion, 2 * HZ);
- if (!timeout) {
- dev_err(priv->dev, "Timed out waiting for completion\n");
- ret = -ETIMEDOUT;
- goto out_disable_controller;
- }
-
- /* Retrieve the status from the interrupt handler */
- ret = priv->status;
-
-out_disable_controller:
- fpga_programmer_disable(priv);
- return ret;
-}
-
-#define FIFO_DMA_ADDRESS 0xf0003000
-#define FIFO_MAX_LEN 4096
-
-/**
- * fpga_program_dma() - program the DATA-FPGA's using the DMA engine
- * @priv: the driver's private data structure
- *
- * Program the DATA-FPGA's using the Freescale DMA engine. This requires that
- * the engine is programmed such that the hardware DMA request lines can
- * control the entire DMA transaction. The system controller FPGA then
- * completely offloads the programming from the CPU.
- *
- * Returns 0 on success, -ERRNO otherwise
- */
-static noinline int fpga_program_dma(struct fpga_dev *priv)
-{
- struct dma_chan *chan = priv->chan;
- struct dma_async_tx_descriptor *tx;
- size_t num_pages, len, avail = 0;
- struct dma_slave_config config;
- struct scatterlist *sg;
- struct sg_table table;
- dma_cookie_t cookie;
- int ret, i;
- unsigned long timeout;
-
- /* Disable the programmer */
- fpga_programmer_disable(priv);
-
- /* Allocate a scatterlist for the DMA destination */
- num_pages = DIV_ROUND_UP(priv->bytes, FIFO_MAX_LEN);
- ret = sg_alloc_table(&table, num_pages, GFP_KERNEL);
- if (ret) {
- dev_err(priv->dev, "Unable to allocate dst scatterlist\n");
- ret = -ENOMEM;
- goto out_return;
- }
-
- /*
- * This is an ugly hack
- *
- * We fill in a scatterlist as if it were mapped for DMA. This is
- * necessary because there exists no better structure for this
- * inside the kernel code.
- *
- * As an added bonus, we can use the DMAEngine API for all of this,
- * rather than inventing another extremely similar API.
- */
- avail = priv->bytes;
- for_each_sg(table.sgl, sg, num_pages, i) {
- len = min_t(size_t, avail, FIFO_MAX_LEN);
- sg_dma_address(sg) = FIFO_DMA_ADDRESS;
- sg_dma_len(sg) = len;
-
- avail -= len;
- }
-
- /* Map the buffer for DMA */
- ret = fpga_dma_map(priv);
- if (ret) {
- dev_err(priv->dev, "Unable to map buffer for DMA\n");
- goto out_free_table;
- }
-
- /*
- * Configure the DMA channel to transfer FIFO_SIZE / 2 bytes per
- * transaction, and then put it under external control
- */
- memset(&config, 0, sizeof(config));
- config.direction = DMA_MEM_TO_DEV;
- config.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
- config.dst_maxburst = fpga_fifo_size(priv->regs) / 2 / 4;
- ret = dmaengine_slave_config(chan, &config);
- if (ret) {
- dev_err(priv->dev, "DMA slave configuration failed\n");
- goto out_dma_unmap;
- }
-
- ret = fsl_dma_external_start(chan, 1);
- if (ret) {
- dev_err(priv->dev, "DMA external control setup failed\n");
- goto out_dma_unmap;
- }
-
- /* setup and submit the DMA transaction */
-
- tx = dmaengine_prep_dma_sg(chan, table.sgl, num_pages,
- priv->sglist, priv->sglen, 0);
- if (!tx) {
- dev_err(priv->dev, "Unable to prep DMA transaction\n");
- ret = -ENOMEM;
- goto out_dma_unmap;
- }
-
- cookie = tx->tx_submit(tx);
- if (dma_submit_error(cookie)) {
- dev_err(priv->dev, "Unable to submit DMA transaction\n");
- ret = -ENOMEM;
- goto out_dma_unmap;
- }
-
- dma_async_issue_pending(chan);
-
- /* Set the total byte count */
- fpga_set_byte_count(priv->regs, priv->bytes);
- dev_dbg(priv->dev, "total byte count %u bytes\n", priv->bytes);
-
- /* Enable the controller for DMA programming */
- fpga_programmer_enable(priv, true);
- dev_dbg(priv->dev, "enabled the controller\n");
-
- /* Wait for the interrupt handler to signal that programming finished */
- timeout = wait_for_completion_timeout(&priv->completion, 2 * HZ);
- if (!timeout) {
- dev_err(priv->dev, "Timed out waiting for completion\n");
- ret = -ETIMEDOUT;
- goto out_disable_controller;
- }
-
- /* Retrieve the status from the interrupt handler */
- ret = priv->status;
-
-out_disable_controller:
- fpga_programmer_disable(priv);
-out_dma_unmap:
- fpga_dma_unmap(priv);
-out_free_table:
- sg_free_table(&table);
-out_return:
- return ret;
-}
-
-/*
- * Interrupt Handling
- */
-
-static irqreturn_t fpga_irq(int irq, void *dev_id)
-{
- struct fpga_dev *priv = dev_id;
-
- /* Save the status */
- priv->status = fpga_config_error(priv->regs) ? -EIO : 0;
- dev_dbg(priv->dev, "INTERRUPT status %d\n", priv->status);
- fpga_dump_registers(priv);
-
- /* Disabling the programmer clears the interrupt */
- fpga_programmer_disable(priv);
-
- /* Notify any waiters */
- complete(&priv->completion);
-
- return IRQ_HANDLED;
-}
-
-/*
- * SYSFS Helpers
- */
-
-/**
- * fpga_do_stop() - deconfigure (reset) the DATA-FPGA's
- * @priv: the driver's private data structure
- *
- * LOCKING: must hold priv->lock
- */
-static int fpga_do_stop(struct fpga_dev *priv)
-{
- u32 val;
-
- /* Set the led to unprogrammed */
- ledtrig_fpga_programmed(false);
-
- /* Pulse the config line to reset the FPGA's */
- val = CFG_CTL_ENABLE | CFG_CTL_RESET;
- iowrite32be(val, priv->regs + FPGA_CONFIG_CONTROL);
- iowrite32be(0x0, priv->regs + FPGA_CONFIG_CONTROL);
-
- return 0;
-}
-
-static noinline int fpga_do_program(struct fpga_dev *priv)
-{
- int ret;
-
- if (priv->bytes != priv->fw_size) {
- dev_err(priv->dev, "Incorrect bitfile size: got %zu bytes, "
- "should be %zu bytes\n",
- priv->bytes, priv->fw_size);
- return -EINVAL;
- }
-
- if (!fpga_power_enabled(priv)) {
- dev_err(priv->dev, "Power not enabled\n");
- return -EINVAL;
- }
-
- if (!fpga_power_good(priv)) {
- dev_err(priv->dev, "Power not good\n");
- return -EINVAL;
- }
-
- /* Set the LED to unprogrammed */
- ledtrig_fpga_programmed(false);
-
- /* Try to program the FPGA's using DMA */
- ret = fpga_program_dma(priv);
-
- /* If DMA failed or doesn't exist, try with CPU */
- if (ret) {
- dev_warn(priv->dev, "Falling back to CPU programming\n");
- ret = fpga_program_cpu(priv);
- }
-
- if (ret) {
- dev_err(priv->dev, "Unable to program FPGA's\n");
- return ret;
- }
-
- /* Drop the firmware bitfile from memory */
- fpga_drop_firmware_data(priv);
-
- dev_dbg(priv->dev, "FPGA programming successful\n");
- ledtrig_fpga_programmed(true);
-
- return 0;
-}
-
-/*
- * File Operations
- */
-
-static int fpga_open(struct inode *inode, struct file *filp)
-{
- /*
- * The miscdevice layer puts our struct miscdevice into the
- * filp->private_data field. We use this to find our private
- * data and then overwrite it with our own private structure.
- */
- struct fpga_dev *priv = container_of(filp->private_data,
- struct fpga_dev, miscdev);
- unsigned int nr_pages;
- int ret;
-
- /* We only allow one process at a time */
- ret = mutex_lock_interruptible(&priv->lock);
- if (ret)
- return ret;
-
- filp->private_data = priv;
- kref_get(&priv->ref);
-
- /* Truncation: drop any existing data */
- if (filp->f_flags & O_TRUNC)
- priv->bytes = 0;
-
- /* Check if we have already allocated a buffer */
- if (priv->buf_allocated)
- return 0;
-
- /* Allocate a buffer to hold enough data for the bitfile */
- nr_pages = DIV_ROUND_UP(priv->fw_size, PAGE_SIZE);
- ret = fpga_dma_init(priv, nr_pages);
- if (ret) {
- dev_err(priv->dev, "unable to allocate data buffer\n");
- mutex_unlock(&priv->lock);
- kref_put(&priv->ref, fpga_dev_remove);
- return ret;
- }
-
- priv->buf_allocated = true;
- return 0;
-}
-
-static int fpga_release(struct inode *inode, struct file *filp)
-{
- struct fpga_dev *priv = filp->private_data;
-
- mutex_unlock(&priv->lock);
- kref_put(&priv->ref, fpga_dev_remove);
- return 0;
-}
-
-static ssize_t fpga_write(struct file *filp, const char __user *buf,
- size_t count, loff_t *f_pos)
-{
- struct fpga_dev *priv = filp->private_data;
-
- /* FPGA bitfiles have an exact size: disallow anything else */
- if (priv->bytes >= priv->fw_size)
- return -ENOSPC;
-
- count = min_t(size_t, priv->fw_size - priv->bytes, count);
- if (copy_from_user(priv->vaddr + priv->bytes, buf, count))
- return -EFAULT;
-
- priv->bytes += count;
- return count;
-}
-
-static ssize_t fpga_read(struct file *filp, char __user *buf, size_t count,
- loff_t *f_pos)
-{
- struct fpga_dev *priv = filp->private_data;
- return simple_read_from_buffer(buf, count, f_pos,
- priv->vaddr, priv->bytes);
-}
-
-static loff_t fpga_llseek(struct file *filp, loff_t offset, int origin)
-{
- struct fpga_dev *priv = filp->private_data;
-
- /* only read-only opens are allowed to seek */
- if ((filp->f_flags & O_ACCMODE) != O_RDONLY)
- return -EINVAL;
-
- return fixed_size_llseek(filp, offset, origin, priv->fw_size);
-}
-
-static const struct file_operations fpga_fops = {
- .open = fpga_open,
- .release = fpga_release,
- .write = fpga_write,
- .read = fpga_read,
- .llseek = fpga_llseek,
-};
-
-/*
- * Device Attributes
- */
-
-static ssize_t pfail_show(struct device *dev, struct device_attribute *attr,
- char *buf)
-{
- struct fpga_dev *priv = dev_get_drvdata(dev);
- u8 val;
-
- val = ioread8(priv->regs + CTL_PWR_FAIL);
- return snprintf(buf, PAGE_SIZE, "0x%.2x\n", val);
-}
-
-static ssize_t pgood_show(struct device *dev, struct device_attribute *attr,
- char *buf)
-{
- struct fpga_dev *priv = dev_get_drvdata(dev);
- return snprintf(buf, PAGE_SIZE, "%d\n", fpga_power_good(priv));
-}
-
-static ssize_t penable_show(struct device *dev, struct device_attribute *attr,
- char *buf)
-{
- struct fpga_dev *priv = dev_get_drvdata(dev);
- return snprintf(buf, PAGE_SIZE, "%d\n", fpga_power_enabled(priv));
-}
-
-static ssize_t penable_store(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct fpga_dev *priv = dev_get_drvdata(dev);
- unsigned long val;
- int ret;
-
- ret = kstrtoul(buf, 0, &val);
- if (ret)
- return ret;
-
- if (val) {
- ret = fpga_enable_power_supplies(priv);
- if (ret)
- return ret;
- } else {
- fpga_do_stop(priv);
- fpga_disable_power_supplies(priv);
- }
-
- return count;
-}
-
-static ssize_t program_show(struct device *dev, struct device_attribute *attr,
- char *buf)
-{
- struct fpga_dev *priv = dev_get_drvdata(dev);
- return snprintf(buf, PAGE_SIZE, "%d\n", fpga_running(priv));
-}
-
-static ssize_t program_store(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct fpga_dev *priv = dev_get_drvdata(dev);
- unsigned long val;
- int ret;
-
- ret = kstrtoul(buf, 0, &val);
- if (ret)
- return ret;
-
- /* We can't have an image writer and be programming simultaneously */
- if (mutex_lock_interruptible(&priv->lock))
- return -ERESTARTSYS;
-
- /* Program or Reset the FPGA's */
- ret = val ? fpga_do_program(priv) : fpga_do_stop(priv);
- if (ret)
- goto out_unlock;
-
- /* Success */
- ret = count;
-
-out_unlock:
- mutex_unlock(&priv->lock);
- return ret;
-}
-
-static DEVICE_ATTR(power_fail, S_IRUGO, pfail_show, NULL);
-static DEVICE_ATTR(power_good, S_IRUGO, pgood_show, NULL);
-static DEVICE_ATTR(power_enable, S_IRUGO | S_IWUSR,
- penable_show, penable_store);
-
-static DEVICE_ATTR(program, S_IRUGO | S_IWUSR,
- program_show, program_store);
-
-static struct attribute *fpga_attributes[] = {
- &dev_attr_power_fail.attr,
- &dev_attr_power_good.attr,
- &dev_attr_power_enable.attr,
- &dev_attr_program.attr,
- NULL,
-};
-
-static const struct attribute_group fpga_attr_group = {
- .attrs = fpga_attributes,
-};
-
-/*
- * OpenFirmware Device Subsystem
- */
-
-#define SYS_REG_VERSION 0x00
-#define SYS_REG_GEOGRAPHIC 0x10
-
-static bool dma_filter(struct dma_chan *chan, void *data)
-{
- /*
- * DMA Channel #0 is the only acceptable device
- *
- * This probably won't survive an unload/load cycle of the Freescale
- * DMAEngine driver, but that won't be a problem
- */
- return chan->chan_id == 0 && chan->device->dev_id == 0;
-}
-
-static int fpga_of_remove(struct platform_device *op)
-{
- struct fpga_dev *priv = platform_get_drvdata(op);
- struct device *this_device = priv->miscdev.this_device;
-
- sysfs_remove_group(&this_device->kobj, &fpga_attr_group);
- misc_deregister(&priv->miscdev);
-
- free_irq(priv->irq, priv);
- irq_dispose_mapping(priv->irq);
-
- /* make sure the power supplies are off */
- fpga_disable_power_supplies(priv);
-
- /* unmap registers */
- iounmap(priv->immr);
- iounmap(priv->regs);
-
- dma_release_channel(priv->chan);
-
- /* drop our reference to the private data structure */
- kref_put(&priv->ref, fpga_dev_remove);
- return 0;
-}
-
-/* CTL-CPLD Version Register */
-#define CTL_CPLD_VERSION 0x2000
-
-static int fpga_of_probe(struct platform_device *op)
-{
- struct device_node *of_node = op->dev.of_node;
- struct device *this_device;
- struct fpga_dev *priv;
- dma_cap_mask_t mask;
- u32 ver;
- int ret;
-
- /* Allocate private data */
- priv = kzalloc(sizeof(*priv), GFP_KERNEL);
- if (!priv) {
- dev_err(&op->dev, "Unable to allocate private data\n");
- ret = -ENOMEM;
- goto out_return;
- }
-
- /* Setup the miscdevice */
- priv->miscdev.minor = MISC_DYNAMIC_MINOR;
- priv->miscdev.name = drv_name;
- priv->miscdev.fops = &fpga_fops;
-
- kref_init(&priv->ref);
-
- platform_set_drvdata(op, priv);
- priv->dev = &op->dev;
- mutex_init(&priv->lock);
- init_completion(&priv->completion);
-
- dev_set_drvdata(priv->dev, priv);
- dma_cap_zero(mask);
- dma_cap_set(DMA_MEMCPY, mask);
- dma_cap_set(DMA_SLAVE, mask);
- dma_cap_set(DMA_SG, mask);
-
- /* Get control of DMA channel #0 */
- priv->chan = dma_request_channel(mask, dma_filter, NULL);
- if (!priv->chan) {
- dev_err(&op->dev, "Unable to acquire DMA channel #0\n");
- ret = -ENODEV;
- goto out_free_priv;
- }
-
- /* Remap the registers for use */
- priv->regs = of_iomap(of_node, 0);
- if (!priv->regs) {
- dev_err(&op->dev, "Unable to ioremap registers\n");
- ret = -ENOMEM;
- goto out_dma_release_channel;
- }
-
- /* Remap the IMMR for use */
- priv->immr = ioremap(get_immrbase(), 0x100000);
- if (!priv->immr) {
- dev_err(&op->dev, "Unable to ioremap IMMR\n");
- ret = -ENOMEM;
- goto out_unmap_regs;
- }
-
- /*
- * Check that external DMA is configured
- *
- * U-Boot does this for us, but we should check it and bail out if
- * there is a problem. Failing to have this register setup correctly
- * will cause the DMA controller to transfer a single cacheline
- * worth of data, then wedge itself.
- */
- if ((ioread32be(priv->immr + 0x114) & 0xE00) != 0xE00) {
- dev_err(&op->dev, "External DMA control not configured\n");
- ret = -ENODEV;
- goto out_unmap_immr;
- }
-
- /*
- * Check the CTL-CPLD version
- *
- * This driver uses the CTL-CPLD DATA-FPGA power sequencer, and we
- * don't want to run on any version of the CTL-CPLD that does not use
- * a compatible register layout.
- *
- * v2: changed register layout, added power sequencer
- * v3: added glitch filter on the i2c overcurrent/overtemp outputs
- */
- ver = ioread8(priv->regs + CTL_CPLD_VERSION);
- if (ver != 0x02 && ver != 0x03) {
- dev_err(&op->dev, "CTL-CPLD is not version 0x02 or 0x03!\n");
- ret = -ENODEV;
- goto out_unmap_immr;
- }
-
- /* Set the exact size that the firmware image should be */
- ver = ioread32be(priv->regs + SYS_REG_VERSION);
- priv->fw_size = (ver & (1 << 18)) ? FW_SIZE_EP2S130 : FW_SIZE_EP2S90;
-
- /* Find the correct IRQ number */
- priv->irq = irq_of_parse_and_map(of_node, 0);
- if (priv->irq == NO_IRQ) {
- dev_err(&op->dev, "Unable to find IRQ line\n");
- ret = -ENODEV;
- goto out_unmap_immr;
- }
-
- /* Request the IRQ */
- ret = request_irq(priv->irq, fpga_irq, IRQF_SHARED, drv_name, priv);
- if (ret) {
- dev_err(&op->dev, "Unable to request IRQ %d\n", priv->irq);
- ret = -ENODEV;
- goto out_irq_dispose_mapping;
- }
-
- /* Reset and stop the FPGA's, just in case */
- fpga_do_stop(priv);
-
- /* Register the miscdevice */
- ret = misc_register(&priv->miscdev);
- if (ret) {
- dev_err(&op->dev, "Unable to register miscdevice\n");
- goto out_free_irq;
- }
-
- /* Create the sysfs files */
- this_device = priv->miscdev.this_device;
- dev_set_drvdata(this_device, priv);
- ret = sysfs_create_group(&this_device->kobj, &fpga_attr_group);
- if (ret) {
- dev_err(&op->dev, "Unable to create sysfs files\n");
- goto out_misc_deregister;
- }
-
- dev_info(priv->dev, "CARMA FPGA Programmer: %s rev%s with %s FPGAs\n",
- (ver & (1 << 17)) ? "Correlator" : "Digitizer",
- (ver & (1 << 16)) ? "B" : "A",
- (ver & (1 << 18)) ? "EP2S130" : "EP2S90");
-
- return 0;
-
-out_misc_deregister:
- misc_deregister(&priv->miscdev);
-out_free_irq:
- free_irq(priv->irq, priv);
-out_irq_dispose_mapping:
- irq_dispose_mapping(priv->irq);
-out_unmap_immr:
- iounmap(priv->immr);
-out_unmap_regs:
- iounmap(priv->regs);
-out_dma_release_channel:
- dma_release_channel(priv->chan);
-out_free_priv:
- kref_put(&priv->ref, fpga_dev_remove);
-out_return:
- return ret;
-}
-
-static const struct of_device_id fpga_of_match[] = {
- { .compatible = "carma,fpga-programmer", },
- {},
-};
-
-static struct platform_driver fpga_of_driver = {
- .probe = fpga_of_probe,
- .remove = fpga_of_remove,
- .driver = {
- .name = drv_name,
- .of_match_table = fpga_of_match,
- },
-};
-
-/*
- * Module Init / Exit
- */
-
-static int __init fpga_init(void)
-{
- led_trigger_register_simple("fpga", &ledtrig_fpga);
- return platform_driver_register(&fpga_of_driver);
-}
-
-static void __exit fpga_exit(void)
-{
- platform_driver_unregister(&fpga_of_driver);
- led_trigger_unregister_simple(ledtrig_fpga);
-}
-
-MODULE_AUTHOR("Ira W. Snyder <iws@ovro.caltech.edu>");
-MODULE_DESCRIPTION("CARMA Board DATA-FPGA Programmer");
-MODULE_LICENSE("GPL");
-
-module_init(fpga_init);
-module_exit(fpga_exit);
diff --git a/kernel/drivers/misc/carma/carma-fpga.c b/kernel/drivers/misc/carma/carma-fpga.c
deleted file mode 100644
index 5aba3fd78..000000000
--- a/kernel/drivers/misc/carma/carma-fpga.c
+++ /dev/null
@@ -1,1507 +0,0 @@
-/*
- * CARMA DATA-FPGA Access Driver
- *
- * Copyright (c) 2009-2011 Ira W. Snyder <iws@ovro.caltech.edu>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-/*
- * FPGA Memory Dump Format
- *
- * FPGA #0 control registers (32 x 32-bit words)
- * FPGA #1 control registers (32 x 32-bit words)
- * FPGA #2 control registers (32 x 32-bit words)
- * FPGA #3 control registers (32 x 32-bit words)
- * SYSFPGA control registers (32 x 32-bit words)
- * FPGA #0 correlation array (NUM_CORL0 correlation blocks)
- * FPGA #1 correlation array (NUM_CORL1 correlation blocks)
- * FPGA #2 correlation array (NUM_CORL2 correlation blocks)
- * FPGA #3 correlation array (NUM_CORL3 correlation blocks)
- *
- * Each correlation array consists of:
- *
- * Correlation Data (2 x NUM_LAGSn x 32-bit words)
- * Pipeline Metadata (2 x NUM_METAn x 32-bit words)
- * Quantization Counters (2 x NUM_QCNTn x 32-bit words)
- *
- * The NUM_CORLn, NUM_LAGSn, NUM_METAn, and NUM_QCNTn values come from
- * the FPGA configuration registers. They do not change once the FPGA's
- * have been programmed, they only change on re-programming.
- */
-
-/*
- * Basic Description:
- *
- * This driver is used to capture correlation spectra off of the four data
- * processing FPGAs. The FPGAs are often reprogrammed at runtime, therefore
- * this driver supports dynamic enable/disable of capture while the device
- * remains open.
- *
- * The nominal capture rate is 64Hz (every 15.625ms). To facilitate this fast
- * capture rate, all buffers are pre-allocated to avoid any potentially long
- * running memory allocations while capturing.
- *
- * There are two lists and one pointer which are used to keep track of the
- * different states of data buffers.
- *
- * 1) free list
- * This list holds all empty data buffers which are ready to receive data.
- *
- * 2) inflight pointer
- * This pointer holds the currently inflight data buffer. This buffer is having
- * data copied into it by the DMA engine.
- *
- * 3) used list
- * This list holds data buffers which have been filled, and are waiting to be
- * read by userspace.
- *
- * All buffers start life on the free list, then move successively to the
- * inflight pointer, and then to the used list. After they have been read by
- * userspace, they are moved back to the free list. The cycle repeats as long
- * as necessary.
- *
- * It should be noted that all buffers are mapped and ready for DMA when they
- * are on any of the three lists. They are only unmapped when they are in the
- * process of being read by userspace.
- */
-
-/*
- * Notes on the IRQ masking scheme:
- *
- * The IRQ masking scheme here is different than most other hardware. The only
- * way for the DATA-FPGAs to detect if the kernel has taken too long to copy
- * the data is if the status registers are not cleared before the next
- * correlation data dump is ready.
- *
- * The interrupt line is connected to the status registers, such that when they
- * are cleared, the interrupt is de-asserted. Therein lies our problem. We need
- * to schedule a long-running DMA operation and return from the interrupt
- * handler quickly, but we cannot clear the status registers.
- *
- * To handle this, the system controller FPGA has the capability to connect the
- * interrupt line to a user-controlled GPIO pin. This pin is driven high
- * (unasserted) and left that way. To mask the interrupt, we change the
- * interrupt source to the GPIO pin. Tada, we hid the interrupt. :)
- */
-
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <linux/dma-mapping.h>
-#include <linux/miscdevice.h>
-#include <linux/interrupt.h>
-#include <linux/dmaengine.h>
-#include <linux/seq_file.h>
-#include <linux/highmem.h>
-#include <linux/debugfs.h>
-#include <linux/vmalloc.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/poll.h>
-#include <linux/slab.h>
-#include <linux/kref.h>
-#include <linux/io.h>
-
-/* system controller registers */
-#define SYS_IRQ_SOURCE_CTL 0x24
-#define SYS_IRQ_OUTPUT_EN 0x28
-#define SYS_IRQ_OUTPUT_DATA 0x2C
-#define SYS_IRQ_INPUT_DATA 0x30
-#define SYS_FPGA_CONFIG_STATUS 0x44
-
-/* GPIO IRQ line assignment */
-#define IRQ_CORL_DONE 0x10
-
-/* FPGA registers */
-#define MMAP_REG_VERSION 0x00
-#define MMAP_REG_CORL_CONF1 0x08
-#define MMAP_REG_CORL_CONF2 0x0C
-#define MMAP_REG_STATUS 0x48
-
-#define SYS_FPGA_BLOCK 0xF0000000
-
-#define DATA_FPGA_START 0x400000
-#define DATA_FPGA_SIZE 0x80000
-
-static const char drv_name[] = "carma-fpga";
-
-#define NUM_FPGA 4
-
-#define MIN_DATA_BUFS 8
-#define MAX_DATA_BUFS 64
-
-struct fpga_info {
- unsigned int num_lag_ram;
- unsigned int blk_size;
-};
-
-struct data_buf {
- struct list_head entry;
- void *vaddr;
- struct scatterlist *sglist;
- int sglen;
- int nr_pages;
- size_t size;
-};
-
-struct fpga_device {
- /* character device */
- struct miscdevice miscdev;
- struct device *dev;
- struct mutex mutex;
-
- /* reference count */
- struct kref ref;
-
- /* FPGA registers and information */
- struct fpga_info info[NUM_FPGA];
- void __iomem *regs;
- int irq;
-
- /* FPGA Physical Address/Size Information */
- resource_size_t phys_addr;
- size_t phys_size;
-
- /* DMA structures */
- struct sg_table corl_table;
- unsigned int corl_nents;
- struct dma_chan *chan;
-
- /* Protection for all members below */
- spinlock_t lock;
-
- /* Device enable/disable flag */
- bool enabled;
-
- /* Correlation data buffers */
- wait_queue_head_t wait;
- struct list_head free;
- struct list_head used;
- struct data_buf *inflight;
-
- /* Information about data buffers */
- unsigned int num_dropped;
- unsigned int num_buffers;
- size_t bufsize;
- struct dentry *dbg_entry;
-};
-
-struct fpga_reader {
- struct fpga_device *priv;
- struct data_buf *buf;
- off_t buf_start;
-};
-
-static void fpga_device_release(struct kref *ref)
-{
- struct fpga_device *priv = container_of(ref, struct fpga_device, ref);
-
- /* the last reader has exited, cleanup the last bits */
- mutex_destroy(&priv->mutex);
- kfree(priv);
-}
-
-/*
- * Data Buffer Allocation Helpers
- */
-
-static int carma_dma_init(struct data_buf *buf, int nr_pages)
-{
- struct page *pg;
- int i;
-
- buf->vaddr = vmalloc_32(nr_pages << PAGE_SHIFT);
- if (NULL == buf->vaddr) {
- pr_debug("vmalloc_32(%d pages) failed\n", nr_pages);
- return -ENOMEM;
- }
-
- pr_debug("vmalloc is at addr 0x%08lx, size=%d\n",
- (unsigned long)buf->vaddr,
- nr_pages << PAGE_SHIFT);
-
- memset(buf->vaddr, 0, nr_pages << PAGE_SHIFT);
- buf->nr_pages = nr_pages;
-
- buf->sglist = vzalloc(buf->nr_pages * sizeof(*buf->sglist));
- if (NULL == buf->sglist)
- goto vzalloc_err;
-
- sg_init_table(buf->sglist, buf->nr_pages);
- for (i = 0; i < buf->nr_pages; i++) {
- pg = vmalloc_to_page(buf->vaddr + i * PAGE_SIZE);
- if (NULL == pg)
- goto vmalloc_to_page_err;
- sg_set_page(&buf->sglist[i], pg, PAGE_SIZE, 0);
- }
- return 0;
-
-vmalloc_to_page_err:
- vfree(buf->sglist);
- buf->sglist = NULL;
-vzalloc_err:
- vfree(buf->vaddr);
- buf->vaddr = NULL;
- return -ENOMEM;
-}
-
-static int carma_dma_map(struct device *dev, struct data_buf *buf)
-{
- buf->sglen = dma_map_sg(dev, buf->sglist,
- buf->nr_pages, DMA_FROM_DEVICE);
-
- if (0 == buf->sglen) {
- pr_warn("%s: dma_map_sg failed\n", __func__);
- return -ENOMEM;
- }
- return 0;
-}
-
-static int carma_dma_unmap(struct device *dev, struct data_buf *buf)
-{
- if (!buf->sglen)
- return 0;
-
- dma_unmap_sg(dev, buf->sglist, buf->sglen, DMA_FROM_DEVICE);
- buf->sglen = 0;
- return 0;
-}
-
-/**
- * data_free_buffer() - free a single data buffer and all allocated memory
- * @buf: the buffer to free
- *
- * This will free all of the pages allocated to the given data buffer, and
- * then free the structure itself
- */
-static void data_free_buffer(struct data_buf *buf)
-{
- /* It is ok to free a NULL buffer */
- if (!buf)
- return;
-
- /* free all memory */
- vfree(buf->sglist);
- vfree(buf->vaddr);
- kfree(buf);
-}
-
-/**
- * data_alloc_buffer() - allocate and fill a data buffer with pages
- * @bytes: the number of bytes required
- *
- * This allocates all space needed for a data buffer. It must be mapped before
- * use in a DMA transaction using carma_dma_map().
- *
- * Returns NULL on failure
- */
-static struct data_buf *data_alloc_buffer(const size_t bytes)
-{
- unsigned int nr_pages;
- struct data_buf *buf;
- int ret;
-
- /* calculate the number of pages necessary */
- nr_pages = DIV_ROUND_UP(bytes, PAGE_SIZE);
-
- /* allocate the buffer structure */
- buf = kzalloc(sizeof(*buf), GFP_KERNEL);
- if (!buf)
- goto out_return;
-
- /* initialize internal fields */
- INIT_LIST_HEAD(&buf->entry);
- buf->size = bytes;
-
- /* allocate the buffer */
- ret = carma_dma_init(buf, nr_pages);
- if (ret)
- goto out_free_buf;
-
- return buf;
-
-out_free_buf:
- kfree(buf);
-out_return:
- return NULL;
-}
-
-/**
- * data_free_buffers() - free all allocated buffers
- * @priv: the driver's private data structure
- *
- * Free all buffers allocated by the driver (except those currently in the
- * process of being read by userspace).
- *
- * LOCKING: must hold dev->mutex
- * CONTEXT: user
- */
-static void data_free_buffers(struct fpga_device *priv)
-{
- struct data_buf *buf, *tmp;
-
- /* the device should be stopped, no DMA in progress */
- BUG_ON(priv->inflight != NULL);
-
- list_for_each_entry_safe(buf, tmp, &priv->free, entry) {
- list_del_init(&buf->entry);
- carma_dma_unmap(priv->dev, buf);
- data_free_buffer(buf);
- }
-
- list_for_each_entry_safe(buf, tmp, &priv->used, entry) {
- list_del_init(&buf->entry);
- carma_dma_unmap(priv->dev, buf);
- data_free_buffer(buf);
- }
-
- priv->num_buffers = 0;
- priv->bufsize = 0;
-}
-
-/**
- * data_alloc_buffers() - allocate 1 seconds worth of data buffers
- * @priv: the driver's private data structure
- *
- * Allocate enough buffers for a whole second worth of data
- *
- * This routine will attempt to degrade nicely by succeeding even if a full
- * second worth of data buffers could not be allocated, as long as a minimum
- * number were allocated. In this case, it will print a message to the kernel
- * log.
- *
- * The device must not be modifying any lists when this is called.
- *
- * CONTEXT: user
- * LOCKING: must hold dev->mutex
- *
- * Returns 0 on success, -ERRNO otherwise
- */
-static int data_alloc_buffers(struct fpga_device *priv)
-{
- struct data_buf *buf;
- int i, ret;
-
- for (i = 0; i < MAX_DATA_BUFS; i++) {
-
- /* allocate a buffer */
- buf = data_alloc_buffer(priv->bufsize);
- if (!buf)
- break;
-
- /* map it for DMA */
- ret = carma_dma_map(priv->dev, buf);
- if (ret) {
- data_free_buffer(buf);
- break;
- }
-
- /* add it to the list of free buffers */
- list_add_tail(&buf->entry, &priv->free);
- priv->num_buffers++;
- }
-
- /* Make sure we allocated the minimum required number of buffers */
- if (priv->num_buffers < MIN_DATA_BUFS) {
- dev_err(priv->dev, "Unable to allocate enough data buffers\n");
- data_free_buffers(priv);
- return -ENOMEM;
- }
-
- /* Warn if we are running in a degraded state, but do not fail */
- if (priv->num_buffers < MAX_DATA_BUFS) {
- dev_warn(priv->dev,
- "Unable to allocate %d buffers, using %d buffers instead\n",
- MAX_DATA_BUFS, i);
- }
-
- return 0;
-}
-
-/*
- * DMA Operations Helpers
- */
-
-/**
- * fpga_start_addr() - get the physical address a DATA-FPGA
- * @priv: the driver's private data structure
- * @fpga: the DATA-FPGA number (zero based)
- */
-static dma_addr_t fpga_start_addr(struct fpga_device *priv, unsigned int fpga)
-{
- return priv->phys_addr + 0x400000 + (0x80000 * fpga);
-}
-
-/**
- * fpga_block_addr() - get the physical address of a correlation data block
- * @priv: the driver's private data structure
- * @fpga: the DATA-FPGA number (zero based)
- * @blknum: the correlation block number (zero based)
- */
-static dma_addr_t fpga_block_addr(struct fpga_device *priv, unsigned int fpga,
- unsigned int blknum)
-{
- return fpga_start_addr(priv, fpga) + (0x10000 * (1 + blknum));
-}
-
-#define REG_BLOCK_SIZE (32 * 4)
-
-/**
- * data_setup_corl_table() - create the scatterlist for correlation dumps
- * @priv: the driver's private data structure
- *
- * Create the scatterlist for transferring a correlation dump from the
- * DATA FPGAs. This structure will be reused for each buffer than needs
- * to be filled with correlation data.
- *
- * Returns 0 on success, -ERRNO otherwise
- */
-static int data_setup_corl_table(struct fpga_device *priv)
-{
- struct sg_table *table = &priv->corl_table;
- struct scatterlist *sg;
- struct fpga_info *info;
- int i, j, ret;
-
- /* Calculate the number of entries needed */
- priv->corl_nents = (1 + NUM_FPGA) * REG_BLOCK_SIZE;
- for (i = 0; i < NUM_FPGA; i++)
- priv->corl_nents += priv->info[i].num_lag_ram;
-
- /* Allocate the scatterlist table */
- ret = sg_alloc_table(table, priv->corl_nents, GFP_KERNEL);
- if (ret) {
- dev_err(priv->dev, "unable to allocate DMA table\n");
- return ret;
- }
-
- /* Add the DATA FPGA registers to the scatterlist */
- sg = table->sgl;
- for (i = 0; i < NUM_FPGA; i++) {
- sg_dma_address(sg) = fpga_start_addr(priv, i);
- sg_dma_len(sg) = REG_BLOCK_SIZE;
- sg = sg_next(sg);
- }
-
- /* Add the SYS-FPGA registers to the scatterlist */
- sg_dma_address(sg) = SYS_FPGA_BLOCK;
- sg_dma_len(sg) = REG_BLOCK_SIZE;
- sg = sg_next(sg);
-
- /* Add the FPGA correlation data blocks to the scatterlist */
- for (i = 0; i < NUM_FPGA; i++) {
- info = &priv->info[i];
- for (j = 0; j < info->num_lag_ram; j++) {
- sg_dma_address(sg) = fpga_block_addr(priv, i, j);
- sg_dma_len(sg) = info->blk_size;
- sg = sg_next(sg);
- }
- }
-
- /*
- * All physical addresses and lengths are present in the structure
- * now. It can be reused for every FPGA DATA interrupt
- */
- return 0;
-}
-
-/*
- * FPGA Register Access Helpers
- */
-
-static void fpga_write_reg(struct fpga_device *priv, unsigned int fpga,
- unsigned int reg, u32 val)
-{
- const int fpga_start = DATA_FPGA_START + (fpga * DATA_FPGA_SIZE);
- iowrite32be(val, priv->regs + fpga_start + reg);
-}
-
-static u32 fpga_read_reg(struct fpga_device *priv, unsigned int fpga,
- unsigned int reg)
-{
- const int fpga_start = DATA_FPGA_START + (fpga * DATA_FPGA_SIZE);
- return ioread32be(priv->regs + fpga_start + reg);
-}
-
-/**
- * data_calculate_bufsize() - calculate the data buffer size required
- * @priv: the driver's private data structure
- *
- * Calculate the total buffer size needed to hold a single block
- * of correlation data
- *
- * CONTEXT: user
- *
- * Returns 0 on success, -ERRNO otherwise
- */
-static int data_calculate_bufsize(struct fpga_device *priv)
-{
- u32 num_corl, num_lags, num_meta, num_qcnt, num_pack;
- u32 conf1, conf2, version;
- u32 num_lag_ram, blk_size;
- int i;
-
- /* Each buffer starts with the 5 FPGA register areas */
- priv->bufsize = (1 + NUM_FPGA) * REG_BLOCK_SIZE;
-
- /* Read and store the configuration data for each FPGA */
- for (i = 0; i < NUM_FPGA; i++) {
- version = fpga_read_reg(priv, i, MMAP_REG_VERSION);
- conf1 = fpga_read_reg(priv, i, MMAP_REG_CORL_CONF1);
- conf2 = fpga_read_reg(priv, i, MMAP_REG_CORL_CONF2);
-
- /* minor version 2 and later */
- if ((version & 0x000000FF) >= 2) {
- num_corl = (conf1 & 0x000000F0) >> 4;
- num_pack = (conf1 & 0x00000F00) >> 8;
- num_lags = (conf1 & 0x00FFF000) >> 12;
- num_meta = (conf1 & 0x7F000000) >> 24;
- num_qcnt = (conf2 & 0x00000FFF) >> 0;
- } else {
- num_corl = (conf1 & 0x000000F0) >> 4;
- num_pack = 1; /* implied */
- num_lags = (conf1 & 0x000FFF00) >> 8;
- num_meta = (conf1 & 0x7FF00000) >> 20;
- num_qcnt = (conf2 & 0x00000FFF) >> 0;
- }
-
- num_lag_ram = (num_corl + num_pack - 1) / num_pack;
- blk_size = ((num_pack * num_lags) + num_meta + num_qcnt) * 8;
-
- priv->info[i].num_lag_ram = num_lag_ram;
- priv->info[i].blk_size = blk_size;
- priv->bufsize += num_lag_ram * blk_size;
-
- dev_dbg(priv->dev, "FPGA %d NUM_CORL: %d\n", i, num_corl);
- dev_dbg(priv->dev, "FPGA %d NUM_PACK: %d\n", i, num_pack);
- dev_dbg(priv->dev, "FPGA %d NUM_LAGS: %d\n", i, num_lags);
- dev_dbg(priv->dev, "FPGA %d NUM_META: %d\n", i, num_meta);
- dev_dbg(priv->dev, "FPGA %d NUM_QCNT: %d\n", i, num_qcnt);
- dev_dbg(priv->dev, "FPGA %d BLK_SIZE: %d\n", i, blk_size);
- }
-
- dev_dbg(priv->dev, "TOTAL BUFFER SIZE: %zu bytes\n", priv->bufsize);
- return 0;
-}
-
-/*
- * Interrupt Handling
- */
-
-/**
- * data_disable_interrupts() - stop the device from generating interrupts
- * @priv: the driver's private data structure
- *
- * Hide interrupts by switching to GPIO interrupt source
- *
- * LOCKING: must hold dev->lock
- */
-static void data_disable_interrupts(struct fpga_device *priv)
-{
- /* hide the interrupt by switching the IRQ driver to GPIO */
- iowrite32be(0x2F, priv->regs + SYS_IRQ_SOURCE_CTL);
-}
-
-/**
- * data_enable_interrupts() - allow the device to generate interrupts
- * @priv: the driver's private data structure
- *
- * Unhide interrupts by switching to the FPGA interrupt source. At the
- * same time, clear the DATA-FPGA status registers.
- *
- * LOCKING: must hold dev->lock
- */
-static void data_enable_interrupts(struct fpga_device *priv)
-{
- /* clear the actual FPGA corl_done interrupt */
- fpga_write_reg(priv, 0, MMAP_REG_STATUS, 0x0);
- fpga_write_reg(priv, 1, MMAP_REG_STATUS, 0x0);
- fpga_write_reg(priv, 2, MMAP_REG_STATUS, 0x0);
- fpga_write_reg(priv, 3, MMAP_REG_STATUS, 0x0);
-
- /* flush the writes */
- fpga_read_reg(priv, 0, MMAP_REG_STATUS);
- fpga_read_reg(priv, 1, MMAP_REG_STATUS);
- fpga_read_reg(priv, 2, MMAP_REG_STATUS);
- fpga_read_reg(priv, 3, MMAP_REG_STATUS);
-
- /* switch back to the external interrupt source */
- iowrite32be(0x3F, priv->regs + SYS_IRQ_SOURCE_CTL);
-}
-
-/**
- * data_dma_cb() - DMAEngine callback for DMA completion
- * @data: the driver's private data structure
- *
- * Complete a DMA transfer from the DATA-FPGA's
- *
- * This is called via the DMA callback mechanism, and will handle moving the
- * completed DMA transaction to the used list, and then wake any processes
- * waiting for new data
- *
- * CONTEXT: any, softirq expected
- */
-static void data_dma_cb(void *data)
-{
- struct fpga_device *priv = data;
- unsigned long flags;
-
- spin_lock_irqsave(&priv->lock, flags);
-
- /* If there is no inflight buffer, we've got a bug */
- BUG_ON(priv->inflight == NULL);
-
- /* Move the inflight buffer onto the used list */
- list_move_tail(&priv->inflight->entry, &priv->used);
- priv->inflight = NULL;
-
- /*
- * If data dumping is still enabled, then clear the FPGA
- * status registers and re-enable FPGA interrupts
- */
- if (priv->enabled)
- data_enable_interrupts(priv);
-
- spin_unlock_irqrestore(&priv->lock, flags);
-
- /*
- * We've changed both the inflight and used lists, so we need
- * to wake up any processes that are blocking for those events
- */
- wake_up(&priv->wait);
-}
-
-/**
- * data_submit_dma() - prepare and submit the required DMA to fill a buffer
- * @priv: the driver's private data structure
- * @buf: the data buffer
- *
- * Prepare and submit the necessary DMA transactions to fill a correlation
- * data buffer.
- *
- * LOCKING: must hold dev->lock
- * CONTEXT: hardirq only
- *
- * Returns 0 on success, -ERRNO otherwise
- */
-static int data_submit_dma(struct fpga_device *priv, struct data_buf *buf)
-{
- struct scatterlist *dst_sg, *src_sg;
- unsigned int dst_nents, src_nents;
- struct dma_chan *chan = priv->chan;
- struct dma_async_tx_descriptor *tx;
- dma_cookie_t cookie;
- dma_addr_t dst, src;
- unsigned long dma_flags = 0;
-
- dst_sg = buf->sglist;
- dst_nents = buf->sglen;
-
- src_sg = priv->corl_table.sgl;
- src_nents = priv->corl_nents;
-
- /*
- * All buffers passed to this function should be ready and mapped
- * for DMA already. Therefore, we don't need to do anything except
- * submit it to the Freescale DMA Engine for processing
- */
-
- /* setup the scatterlist to scatterlist transfer */
- tx = chan->device->device_prep_dma_sg(chan,
- dst_sg, dst_nents,
- src_sg, src_nents,
- 0);
- if (!tx) {
- dev_err(priv->dev, "unable to prep scatterlist DMA\n");
- return -ENOMEM;
- }
-
- /* submit the transaction to the DMA controller */
- cookie = tx->tx_submit(tx);
- if (dma_submit_error(cookie)) {
- dev_err(priv->dev, "unable to submit scatterlist DMA\n");
- return -ENOMEM;
- }
-
- /* Prepare the re-read of the SYS-FPGA block */
- dst = sg_dma_address(dst_sg) + (NUM_FPGA * REG_BLOCK_SIZE);
- src = SYS_FPGA_BLOCK;
- tx = chan->device->device_prep_dma_memcpy(chan, dst, src,
- REG_BLOCK_SIZE,
- dma_flags);
- if (!tx) {
- dev_err(priv->dev, "unable to prep SYS-FPGA DMA\n");
- return -ENOMEM;
- }
-
- /* Setup the callback */
- tx->callback = data_dma_cb;
- tx->callback_param = priv;
-
- /* submit the transaction to the DMA controller */
- cookie = tx->tx_submit(tx);
- if (dma_submit_error(cookie)) {
- dev_err(priv->dev, "unable to submit SYS-FPGA DMA\n");
- return -ENOMEM;
- }
-
- return 0;
-}
-
-#define CORL_DONE 0x1
-#define CORL_ERR 0x2
-
-static irqreturn_t data_irq(int irq, void *dev_id)
-{
- struct fpga_device *priv = dev_id;
- bool submitted = false;
- struct data_buf *buf;
- u32 status;
- int i;
-
- /* detect spurious interrupts via FPGA status */
- for (i = 0; i < 4; i++) {
- status = fpga_read_reg(priv, i, MMAP_REG_STATUS);
- if (!(status & (CORL_DONE | CORL_ERR))) {
- dev_err(priv->dev, "spurious irq detected (FPGA)\n");
- return IRQ_NONE;
- }
- }
-
- /* detect spurious interrupts via raw IRQ pin readback */
- status = ioread32be(priv->regs + SYS_IRQ_INPUT_DATA);
- if (status & IRQ_CORL_DONE) {
- dev_err(priv->dev, "spurious irq detected (IRQ)\n");
- return IRQ_NONE;
- }
-
- spin_lock(&priv->lock);
-
- /*
- * This is an error case that should never happen.
- *
- * If this driver has a bug and manages to re-enable interrupts while
- * a DMA is in progress, then we will hit this statement and should
- * start paying attention immediately.
- */
- BUG_ON(priv->inflight != NULL);
-
- /* hide the interrupt by switching the IRQ driver to GPIO */
- data_disable_interrupts(priv);
-
- /* If there are no free buffers, drop this data */
- if (list_empty(&priv->free)) {
- priv->num_dropped++;
- goto out;
- }
-
- buf = list_first_entry(&priv->free, struct data_buf, entry);
- list_del_init(&buf->entry);
- BUG_ON(buf->size != priv->bufsize);
-
- /* Submit a DMA transfer to get the correlation data */
- if (data_submit_dma(priv, buf)) {
- dev_err(priv->dev, "Unable to setup DMA transfer\n");
- list_move_tail(&buf->entry, &priv->free);
- goto out;
- }
-
- /* Save the buffer for the DMA callback */
- priv->inflight = buf;
- submitted = true;
-
- /* Start the DMA Engine */
- dma_async_issue_pending(priv->chan);
-
-out:
- /* If no DMA was submitted, re-enable interrupts */
- if (!submitted)
- data_enable_interrupts(priv);
-
- spin_unlock(&priv->lock);
- return IRQ_HANDLED;
-}
-
-/*
- * Realtime Device Enable Helpers
- */
-
-/**
- * data_device_enable() - enable the device for buffered dumping
- * @priv: the driver's private data structure
- *
- * Enable the device for buffered dumping. Allocates buffers and hooks up
- * the interrupt handler. When this finishes, data will come pouring in.
- *
- * LOCKING: must hold dev->mutex
- * CONTEXT: user context only
- *
- * Returns 0 on success, -ERRNO otherwise
- */
-static int data_device_enable(struct fpga_device *priv)
-{
- bool enabled;
- u32 val;
- int ret;
-
- /* multiple enables are safe: they do nothing */
- spin_lock_irq(&priv->lock);
- enabled = priv->enabled;
- spin_unlock_irq(&priv->lock);
- if (enabled)
- return 0;
-
- /* check that the FPGAs are programmed */
- val = ioread32be(priv->regs + SYS_FPGA_CONFIG_STATUS);
- if (!(val & (1 << 18))) {
- dev_err(priv->dev, "DATA-FPGAs are not enabled\n");
- return -ENODATA;
- }
-
- /* read the FPGAs to calculate the buffer size */
- ret = data_calculate_bufsize(priv);
- if (ret) {
- dev_err(priv->dev, "unable to calculate buffer size\n");
- goto out_error;
- }
-
- /* allocate the correlation data buffers */
- ret = data_alloc_buffers(priv);
- if (ret) {
- dev_err(priv->dev, "unable to allocate buffers\n");
- goto out_error;
- }
-
- /* setup the source scatterlist for dumping correlation data */
- ret = data_setup_corl_table(priv);
- if (ret) {
- dev_err(priv->dev, "unable to setup correlation DMA table\n");
- goto out_error;
- }
-
- /* prevent the FPGAs from generating interrupts */
- data_disable_interrupts(priv);
-
- /* hookup the irq handler */
- ret = request_irq(priv->irq, data_irq, IRQF_SHARED, drv_name, priv);
- if (ret) {
- dev_err(priv->dev, "unable to request IRQ handler\n");
- goto out_error;
- }
-
- /* allow the DMA callback to re-enable FPGA interrupts */
- spin_lock_irq(&priv->lock);
- priv->enabled = true;
- spin_unlock_irq(&priv->lock);
-
- /* allow the FPGAs to generate interrupts */
- data_enable_interrupts(priv);
- return 0;
-
-out_error:
- sg_free_table(&priv->corl_table);
- priv->corl_nents = 0;
-
- data_free_buffers(priv);
- return ret;
-}
-
-/**
- * data_device_disable() - disable the device for buffered dumping
- * @priv: the driver's private data structure
- *
- * Disable the device for buffered dumping. Stops new DMA transactions from
- * being generated, waits for all outstanding DMA to complete, and then frees
- * all buffers.
- *
- * LOCKING: must hold dev->mutex
- * CONTEXT: user only
- *
- * Returns 0 on success, -ERRNO otherwise
- */
-static int data_device_disable(struct fpga_device *priv)
-{
- spin_lock_irq(&priv->lock);
-
- /* allow multiple disable */
- if (!priv->enabled) {
- spin_unlock_irq(&priv->lock);
- return 0;
- }
-
- /*
- * Mark the device disabled
- *
- * This stops DMA callbacks from re-enabling interrupts
- */
- priv->enabled = false;
-
- /* prevent the FPGAs from generating interrupts */
- data_disable_interrupts(priv);
-
- /* wait until all ongoing DMA has finished */
- while (priv->inflight != NULL) {
- spin_unlock_irq(&priv->lock);
- wait_event(priv->wait, priv->inflight == NULL);
- spin_lock_irq(&priv->lock);
- }
-
- spin_unlock_irq(&priv->lock);
-
- /* unhook the irq handler */
- free_irq(priv->irq, priv);
-
- /* free the correlation table */
- sg_free_table(&priv->corl_table);
- priv->corl_nents = 0;
-
- /* free all buffers: the free and used lists are not being changed */
- data_free_buffers(priv);
- return 0;
-}
-
-/*
- * DEBUGFS Interface
- */
-#ifdef CONFIG_DEBUG_FS
-
-/*
- * Count the number of entries in the given list
- */
-static unsigned int list_num_entries(struct list_head *list)
-{
- struct list_head *entry;
- unsigned int ret = 0;
-
- list_for_each(entry, list)
- ret++;
-
- return ret;
-}
-
-static int data_debug_show(struct seq_file *f, void *offset)
-{
- struct fpga_device *priv = f->private;
-
- spin_lock_irq(&priv->lock);
-
- seq_printf(f, "enabled: %d\n", priv->enabled);
- seq_printf(f, "bufsize: %d\n", priv->bufsize);
- seq_printf(f, "num_buffers: %d\n", priv->num_buffers);
- seq_printf(f, "num_free: %d\n", list_num_entries(&priv->free));
- seq_printf(f, "inflight: %d\n", priv->inflight != NULL);
- seq_printf(f, "num_used: %d\n", list_num_entries(&priv->used));
- seq_printf(f, "num_dropped: %d\n", priv->num_dropped);
-
- spin_unlock_irq(&priv->lock);
- return 0;
-}
-
-static int data_debug_open(struct inode *inode, struct file *file)
-{
- return single_open(file, data_debug_show, inode->i_private);
-}
-
-static const struct file_operations data_debug_fops = {
- .owner = THIS_MODULE,
- .open = data_debug_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-static int data_debugfs_init(struct fpga_device *priv)
-{
- priv->dbg_entry = debugfs_create_file(drv_name, S_IRUGO, NULL, priv,
- &data_debug_fops);
- return PTR_ERR_OR_ZERO(priv->dbg_entry);
-}
-
-static void data_debugfs_exit(struct fpga_device *priv)
-{
- debugfs_remove(priv->dbg_entry);
-}
-
-#else
-
-static inline int data_debugfs_init(struct fpga_device *priv)
-{
- return 0;
-}
-
-static inline void data_debugfs_exit(struct fpga_device *priv)
-{
-}
-
-#endif /* CONFIG_DEBUG_FS */
-
-/*
- * SYSFS Attributes
- */
-
-static ssize_t data_en_show(struct device *dev, struct device_attribute *attr,
- char *buf)
-{
- struct fpga_device *priv = dev_get_drvdata(dev);
- int ret;
-
- spin_lock_irq(&priv->lock);
- ret = snprintf(buf, PAGE_SIZE, "%u\n", priv->enabled);
- spin_unlock_irq(&priv->lock);
-
- return ret;
-}
-
-static ssize_t data_en_set(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct fpga_device *priv = dev_get_drvdata(dev);
- unsigned long enable;
- int ret;
-
- ret = kstrtoul(buf, 0, &enable);
- if (ret) {
- dev_err(priv->dev, "unable to parse enable input\n");
- return ret;
- }
-
- /* protect against concurrent enable/disable */
- ret = mutex_lock_interruptible(&priv->mutex);
- if (ret)
- return ret;
-
- if (enable)
- ret = data_device_enable(priv);
- else
- ret = data_device_disable(priv);
-
- if (ret) {
- dev_err(priv->dev, "device %s failed\n",
- enable ? "enable" : "disable");
- count = ret;
- goto out_unlock;
- }
-
-out_unlock:
- mutex_unlock(&priv->mutex);
- return count;
-}
-
-static DEVICE_ATTR(enable, S_IWUSR | S_IRUGO, data_en_show, data_en_set);
-
-static struct attribute *data_sysfs_attrs[] = {
- &dev_attr_enable.attr,
- NULL,
-};
-
-static const struct attribute_group rt_sysfs_attr_group = {
- .attrs = data_sysfs_attrs,
-};
-
-/*
- * FPGA Realtime Data Character Device
- */
-
-static int data_open(struct inode *inode, struct file *filp)
-{
- /*
- * The miscdevice layer puts our struct miscdevice into the
- * filp->private_data field. We use this to find our private
- * data and then overwrite it with our own private structure.
- */
- struct fpga_device *priv = container_of(filp->private_data,
- struct fpga_device, miscdev);
- struct fpga_reader *reader;
- int ret;
-
- /* allocate private data */
- reader = kzalloc(sizeof(*reader), GFP_KERNEL);
- if (!reader)
- return -ENOMEM;
-
- reader->priv = priv;
- reader->buf = NULL;
-
- filp->private_data = reader;
- ret = nonseekable_open(inode, filp);
- if (ret) {
- dev_err(priv->dev, "nonseekable-open failed\n");
- kfree(reader);
- return ret;
- }
-
- /*
- * success, increase the reference count of the private data structure
- * so that it doesn't disappear if the device is unbound
- */
- kref_get(&priv->ref);
- return 0;
-}
-
-static int data_release(struct inode *inode, struct file *filp)
-{
- struct fpga_reader *reader = filp->private_data;
- struct fpga_device *priv = reader->priv;
-
- /* free the per-reader structure */
- data_free_buffer(reader->buf);
- kfree(reader);
- filp->private_data = NULL;
-
- /* decrement our reference count to the private data */
- kref_put(&priv->ref, fpga_device_release);
- return 0;
-}
-
-static ssize_t data_read(struct file *filp, char __user *ubuf, size_t count,
- loff_t *f_pos)
-{
- struct fpga_reader *reader = filp->private_data;
- struct fpga_device *priv = reader->priv;
- struct list_head *used = &priv->used;
- bool drop_buffer = false;
- struct data_buf *dbuf;
- size_t avail;
- void *data;
- int ret;
-
- /* check if we already have a partial buffer */
- if (reader->buf) {
- dbuf = reader->buf;
- goto have_buffer;
- }
-
- spin_lock_irq(&priv->lock);
-
- /* Block until there is at least one buffer on the used list */
- while (list_empty(used)) {
- spin_unlock_irq(&priv->lock);
-
- if (filp->f_flags & O_NONBLOCK)
- return -EAGAIN;
-
- ret = wait_event_interruptible(priv->wait, !list_empty(used));
- if (ret)
- return ret;
-
- spin_lock_irq(&priv->lock);
- }
-
- /* Grab the first buffer off of the used list */
- dbuf = list_first_entry(used, struct data_buf, entry);
- list_del_init(&dbuf->entry);
-
- spin_unlock_irq(&priv->lock);
-
- /* Buffers are always mapped: unmap it */
- carma_dma_unmap(priv->dev, dbuf);
-
- /* save the buffer for later */
- reader->buf = dbuf;
- reader->buf_start = 0;
-
-have_buffer:
- /* Get the number of bytes available */
- avail = dbuf->size - reader->buf_start;
- data = dbuf->vaddr + reader->buf_start;
-
- /* Get the number of bytes we can transfer */
- count = min(count, avail);
-
- /* Copy the data to the userspace buffer */
- if (copy_to_user(ubuf, data, count))
- return -EFAULT;
-
- /* Update the amount of available space */
- avail -= count;
-
- /*
- * If there is still some data available, save the buffer for the
- * next userspace call to read() and return
- */
- if (avail > 0) {
- reader->buf_start += count;
- reader->buf = dbuf;
- return count;
- }
-
- /*
- * Get the buffer ready to be reused for DMA
- *
- * If it fails, we pretend that the read never happed and return
- * -EFAULT to userspace. The read will be retried.
- */
- ret = carma_dma_map(priv->dev, dbuf);
- if (ret) {
- dev_err(priv->dev, "unable to remap buffer for DMA\n");
- return -EFAULT;
- }
-
- /* Lock against concurrent enable/disable */
- spin_lock_irq(&priv->lock);
-
- /* the reader is finished with this buffer */
- reader->buf = NULL;
-
- /*
- * One of two things has happened, the device is disabled, or the
- * device has been reconfigured underneath us. In either case, we
- * should just throw away the buffer.
- *
- * Lockdep complains if this is done under the spinlock, so we
- * handle it during the unlock path.
- */
- if (!priv->enabled || dbuf->size != priv->bufsize) {
- drop_buffer = true;
- goto out_unlock;
- }
-
- /* The buffer is safe to reuse, so add it back to the free list */
- list_add_tail(&dbuf->entry, &priv->free);
-
-out_unlock:
- spin_unlock_irq(&priv->lock);
-
- if (drop_buffer) {
- carma_dma_unmap(priv->dev, dbuf);
- data_free_buffer(dbuf);
- }
-
- return count;
-}
-
-static unsigned int data_poll(struct file *filp, struct poll_table_struct *tbl)
-{
- struct fpga_reader *reader = filp->private_data;
- struct fpga_device *priv = reader->priv;
- unsigned int mask = 0;
-
- poll_wait(filp, &priv->wait, tbl);
-
- if (!list_empty(&priv->used))
- mask |= POLLIN | POLLRDNORM;
-
- return mask;
-}
-
-static int data_mmap(struct file *filp, struct vm_area_struct *vma)
-{
- struct fpga_reader *reader = filp->private_data;
- struct fpga_device *priv = reader->priv;
- unsigned long offset, vsize, psize, addr;
-
- /* VMA properties */
- offset = vma->vm_pgoff << PAGE_SHIFT;
- vsize = vma->vm_end - vma->vm_start;
- psize = priv->phys_size - offset;
- addr = (priv->phys_addr + offset) >> PAGE_SHIFT;
-
- /* Check against the FPGA region's physical memory size */
- if (vsize > psize) {
- dev_err(priv->dev, "requested mmap mapping too large\n");
- return -EINVAL;
- }
-
- vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
-
- return io_remap_pfn_range(vma, vma->vm_start, addr, vsize,
- vma->vm_page_prot);
-}
-
-static const struct file_operations data_fops = {
- .owner = THIS_MODULE,
- .open = data_open,
- .release = data_release,
- .read = data_read,
- .poll = data_poll,
- .mmap = data_mmap,
- .llseek = no_llseek,
-};
-
-/*
- * OpenFirmware Device Subsystem
- */
-
-static bool dma_filter(struct dma_chan *chan, void *data)
-{
- /*
- * DMA Channel #0 is used for the FPGA Programmer, so ignore it
- *
- * This probably won't survive an unload/load cycle of the Freescale
- * DMAEngine driver, but that won't be a problem
- */
- if (chan->chan_id == 0 && chan->device->dev_id == 0)
- return false;
-
- return true;
-}
-
-static int data_of_probe(struct platform_device *op)
-{
- struct device_node *of_node = op->dev.of_node;
- struct device *this_device;
- struct fpga_device *priv;
- struct resource res;
- dma_cap_mask_t mask;
- int ret;
-
- /* Allocate private data */
- priv = kzalloc(sizeof(*priv), GFP_KERNEL);
- if (!priv) {
- dev_err(&op->dev, "Unable to allocate device private data\n");
- ret = -ENOMEM;
- goto out_return;
- }
-
- platform_set_drvdata(op, priv);
- priv->dev = &op->dev;
- kref_init(&priv->ref);
- mutex_init(&priv->mutex);
-
- dev_set_drvdata(priv->dev, priv);
- spin_lock_init(&priv->lock);
- INIT_LIST_HEAD(&priv->free);
- INIT_LIST_HEAD(&priv->used);
- init_waitqueue_head(&priv->wait);
-
- /* Setup the misc device */
- priv->miscdev.minor = MISC_DYNAMIC_MINOR;
- priv->miscdev.name = drv_name;
- priv->miscdev.fops = &data_fops;
-
- /* Get the physical address of the FPGA registers */
- ret = of_address_to_resource(of_node, 0, &res);
- if (ret) {
- dev_err(&op->dev, "Unable to find FPGA physical address\n");
- ret = -ENODEV;
- goto out_free_priv;
- }
-
- priv->phys_addr = res.start;
- priv->phys_size = resource_size(&res);
-
- /* ioremap the registers for use */
- priv->regs = of_iomap(of_node, 0);
- if (!priv->regs) {
- dev_err(&op->dev, "Unable to ioremap registers\n");
- ret = -ENOMEM;
- goto out_free_priv;
- }
-
- dma_cap_zero(mask);
- dma_cap_set(DMA_MEMCPY, mask);
- dma_cap_set(DMA_INTERRUPT, mask);
- dma_cap_set(DMA_SLAVE, mask);
- dma_cap_set(DMA_SG, mask);
-
- /* Request a DMA channel */
- priv->chan = dma_request_channel(mask, dma_filter, NULL);
- if (!priv->chan) {
- dev_err(&op->dev, "Unable to request DMA channel\n");
- ret = -ENODEV;
- goto out_unmap_regs;
- }
-
- /* Find the correct IRQ number */
- priv->irq = irq_of_parse_and_map(of_node, 0);
- if (priv->irq == NO_IRQ) {
- dev_err(&op->dev, "Unable to find IRQ line\n");
- ret = -ENODEV;
- goto out_release_dma;
- }
-
- /* Drive the GPIO for FPGA IRQ high (no interrupt) */
- iowrite32be(IRQ_CORL_DONE, priv->regs + SYS_IRQ_OUTPUT_DATA);
-
- /* Register the miscdevice */
- ret = misc_register(&priv->miscdev);
- if (ret) {
- dev_err(&op->dev, "Unable to register miscdevice\n");
- goto out_irq_dispose_mapping;
- }
-
- /* Create the debugfs files */
- ret = data_debugfs_init(priv);
- if (ret) {
- dev_err(&op->dev, "Unable to create debugfs files\n");
- goto out_misc_deregister;
- }
-
- /* Create the sysfs files */
- this_device = priv->miscdev.this_device;
- dev_set_drvdata(this_device, priv);
- ret = sysfs_create_group(&this_device->kobj, &rt_sysfs_attr_group);
- if (ret) {
- dev_err(&op->dev, "Unable to create sysfs files\n");
- goto out_data_debugfs_exit;
- }
-
- dev_info(&op->dev, "CARMA FPGA Realtime Data Driver Loaded\n");
- return 0;
-
-out_data_debugfs_exit:
- data_debugfs_exit(priv);
-out_misc_deregister:
- misc_deregister(&priv->miscdev);
-out_irq_dispose_mapping:
- irq_dispose_mapping(priv->irq);
-out_release_dma:
- dma_release_channel(priv->chan);
-out_unmap_regs:
- iounmap(priv->regs);
-out_free_priv:
- kref_put(&priv->ref, fpga_device_release);
-out_return:
- return ret;
-}
-
-static int data_of_remove(struct platform_device *op)
-{
- struct fpga_device *priv = platform_get_drvdata(op);
- struct device *this_device = priv->miscdev.this_device;
-
- /* remove all sysfs files, now the device cannot be re-enabled */
- sysfs_remove_group(&this_device->kobj, &rt_sysfs_attr_group);
-
- /* remove all debugfs files */
- data_debugfs_exit(priv);
-
- /* disable the device from generating data */
- data_device_disable(priv);
-
- /* remove the character device to stop new readers from appearing */
- misc_deregister(&priv->miscdev);
-
- /* cleanup everything not needed by readers */
- irq_dispose_mapping(priv->irq);
- dma_release_channel(priv->chan);
- iounmap(priv->regs);
-
- /* release our reference */
- kref_put(&priv->ref, fpga_device_release);
- return 0;
-}
-
-static const struct of_device_id data_of_match[] = {
- { .compatible = "carma,carma-fpga", },
- {},
-};
-
-static struct platform_driver data_of_driver = {
- .probe = data_of_probe,
- .remove = data_of_remove,
- .driver = {
- .name = drv_name,
- .of_match_table = data_of_match,
- },
-};
-
-module_platform_driver(data_of_driver);
-
-MODULE_AUTHOR("Ira W. Snyder <iws@ovro.caltech.edu>");
-MODULE_DESCRIPTION("CARMA DATA-FPGA Access Driver");
-MODULE_LICENSE("GPL");