Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

13 files changed, 7673 insertions, 0 deletions

diff --git a/kernel/drivers/media/usb/tm6000/Kconfig b/kernel/drivers/media/usb/tm6000/Kconfig
new file mode 100644
index 000000000..a43b77abd
--- /dev/null
+++ b/kernel/drivers/media/usb/tm6000/Kconfig
@@ -0,0 +1,33 @@
+config VIDEO_TM6000
+	tristate "TV Master TM5600/6000/6010 driver"
+	depends on VIDEO_DEV && I2C && INPUT && RC_CORE && USB
+	select VIDEO_TUNER
+	select MEDIA_TUNER_XC2028
+	select MEDIA_TUNER_XC5000
+	select VIDEOBUF_VMALLOC
+	help
+	  Support for TM5600/TM6000/TM6010 USB Device
+
+	  Since these cards have no MPEG decoder onboard, they transmit
+	  only compressed MPEG data over the usb bus, so you need
+	  an external software decoder to watch TV on your computer.
+
+	  Say Y if you own such a device and want to use it.
+
+config VIDEO_TM6000_ALSA
+	tristate "TV Master TM5600/6000/6010 audio support"
+	depends on VIDEO_TM6000 && SND
+	select SND_PCM
+	---help---
+	  This is a video4linux driver for direct (DMA) audio for
+	  TM5600/TM6000/TM6010 USB Devices.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called tm6000-alsa.
+
+config VIDEO_TM6000_DVB
+	tristate "DVB Support for tm6000 based TV cards"
+	depends on VIDEO_TM6000 && DVB_CORE && USB
+	select DVB_ZL10353
+	---help---
+	  This adds support for DVB cards based on the tm5600/tm6000 chip.
diff --git a/kernel/drivers/media/usb/tm6000/Makefile b/kernel/drivers/media/usb/tm6000/Makefile
new file mode 100644
index 000000000..f2644933b
--- /dev/null
+++ b/kernel/drivers/media/usb/tm6000/Makefile
@@ -0,0 +1,15 @@
+tm6000-y := tm6000-cards.o \
+		   tm6000-core.o  \
+		   tm6000-i2c.o   \
+		   tm6000-video.o \
+		   tm6000-stds.o \
+		   tm6000-input.o
+
+obj-$(CONFIG_VIDEO_TM6000) += tm6000.o
+obj-$(CONFIG_VIDEO_TM6000_ALSA) += tm6000-alsa.o
+obj-$(CONFIG_VIDEO_TM6000_DVB) += tm6000-dvb.o
+
+ccflags-y += -Idrivers/media/i2c
+ccflags-y += -Idrivers/media/tuners
+ccflags-y += -Idrivers/media/dvb-core
+ccflags-y += -Idrivers/media/dvb-frontends
diff --git a/kernel/drivers/media/usb/tm6000/tm6000-alsa.c b/kernel/drivers/media/usb/tm6000/tm6000-alsa.c
new file mode 100644
index 000000000..74e5697d8
--- /dev/null
+++ b/kernel/drivers/media/usb/tm6000/tm6000-alsa.c
@@ -0,0 +1,529 @@
+/*
+ *
+ *  Support for audio capture for tm5600/6000/6010
+ *    (c) 2007-2008 Mauro Carvalho Chehab
+ *
+ *  Based on cx88-alsa.c
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/usb.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+
+#include <linux/delay.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/control.h>
+#include <sound/initval.h>
+
+
+#include "tm6000.h"
+#include "tm6000-regs.h"
+
+#undef dprintk
+
+#define dprintk(level, fmt, arg...) do {				   \
+	if (debug >= level)						   \
+		printk(KERN_INFO "%s/1: " fmt, chip->core->name , ## arg); \
+	} while (0)
+
+/****************************************************************************
+			Module global static vars
+ ****************************************************************************/
+
+static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;	/* Index 0-MAX */
+
+static bool enable[SNDRV_CARDS] = {1, [1 ... (SNDRV_CARDS - 1)] = 1};
+
+module_param_array(enable, bool, NULL, 0444);
+MODULE_PARM_DESC(enable, "Enable tm6000x soundcard. default enabled.");
+
+module_param_array(index, int, NULL, 0444);
+MODULE_PARM_DESC(index, "Index value for tm6000x capture interface(s).");
+
+
+/****************************************************************************
+				Module macros
+ ****************************************************************************/
+
+MODULE_DESCRIPTION("ALSA driver module for tm5600/tm6000/tm6010 based TV cards");
+MODULE_AUTHOR("Mauro Carvalho Chehab");
+MODULE_LICENSE("GPL");
+MODULE_SUPPORTED_DEVICE("{{Trident,tm5600},"
+			"{{Trident,tm6000},"
+			"{{Trident,tm6010}");
+static unsigned int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "enable debug messages");
+
+/****************************************************************************
+			Module specific funtions
+ ****************************************************************************/
+
+/*
+ * BOARD Specific: Sets audio DMA
+ */
+
+static int _tm6000_start_audio_dma(struct snd_tm6000_card *chip)
+{
+	struct tm6000_core *core = chip->core;
+
+	dprintk(1, "Starting audio DMA\n");
+
+	/* Enables audio */
+	tm6000_set_reg_mask(core, TM6010_REQ07_RCC_ACTIVE_IF, 0x40, 0x40);
+
+	tm6000_set_audio_bitrate(core, 48000);
+
+	return 0;
+}
+
+/*
+ * BOARD Specific: Resets audio DMA
+ */
+static int _tm6000_stop_audio_dma(struct snd_tm6000_card *chip)
+{
+	struct tm6000_core *core = chip->core;
+
+	dprintk(1, "Stopping audio DMA\n");
+
+	/* Disables audio */
+	tm6000_set_reg_mask(core, TM6010_REQ07_RCC_ACTIVE_IF, 0x00, 0x40);
+
+	return 0;
+}
+
+static void dsp_buffer_free(struct snd_pcm_substream *substream)
+{
+	struct snd_tm6000_card *chip = snd_pcm_substream_chip(substream);
+
+	dprintk(2, "Freeing buffer\n");
+
+	vfree(substream->runtime->dma_area);
+	substream->runtime->dma_area = NULL;
+	substream->runtime->dma_bytes = 0;
+}
+
+static int dsp_buffer_alloc(struct snd_pcm_substream *substream, int size)
+{
+	struct snd_tm6000_card *chip = snd_pcm_substream_chip(substream);
+
+	dprintk(2, "Allocating buffer\n");
+
+	if (substream->runtime->dma_area) {
+		if (substream->runtime->dma_bytes > size)
+			return 0;
+
+		dsp_buffer_free(substream);
+	}
+
+	substream->runtime->dma_area = vmalloc(size);
+	if (!substream->runtime->dma_area)
+		return -ENOMEM;
+
+	substream->runtime->dma_bytes = size;
+
+	return 0;
+}
+
+
+/****************************************************************************
+				ALSA PCM Interface
+ ****************************************************************************/
+
+/*
+ * Digital hardware definition
+ */
+#define DEFAULT_FIFO_SIZE	4096
+
+static struct snd_pcm_hardware snd_tm6000_digital_hw = {
+	.info = SNDRV_PCM_INFO_BATCH |
+		SNDRV_PCM_INFO_MMAP |
+		SNDRV_PCM_INFO_INTERLEAVED |
+		SNDRV_PCM_INFO_BLOCK_TRANSFER |
+		SNDRV_PCM_INFO_MMAP_VALID,
+	.formats = SNDRV_PCM_FMTBIT_S16_LE,
+
+	.rates = SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_KNOT,
+	.rate_min = 48000,
+	.rate_max = 48000,
+	.channels_min = 2,
+	.channels_max = 2,
+	.period_bytes_min = 64,
+	.period_bytes_max = 12544,
+	.periods_min = 2,
+	.periods_max = 98,
+	.buffer_bytes_max = 62720 * 8,
+};
+
+/*
+ * audio pcm capture open callback
+ */
+static int snd_tm6000_pcm_open(struct snd_pcm_substream *substream)
+{
+	struct snd_tm6000_card *chip = snd_pcm_substream_chip(substream);
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	int err;
+
+	err = snd_pcm_hw_constraint_pow2(runtime, 0,
+					 SNDRV_PCM_HW_PARAM_PERIODS);
+	if (err < 0)
+		goto _error;
+
+	chip->substream = substream;
+
+	runtime->hw = snd_tm6000_digital_hw;
+	snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS);
+
+	return 0;
+_error:
+	dprintk(1, "Error opening PCM!\n");
+	return err;
+}
+
+/*
+ * audio close callback
+ */
+static int snd_tm6000_close(struct snd_pcm_substream *substream)
+{
+	struct snd_tm6000_card *chip = snd_pcm_substream_chip(substream);
+	struct tm6000_core *core = chip->core;
+
+	if (atomic_read(&core->stream_started) > 0) {
+		atomic_set(&core->stream_started, 0);
+		schedule_work(&core->wq_trigger);
+	}
+
+	return 0;
+}
+
+static int tm6000_fillbuf(struct tm6000_core *core, char *buf, int size)
+{
+	struct snd_tm6000_card *chip = core->adev;
+	struct snd_pcm_substream *substream = chip->substream;
+	struct snd_pcm_runtime *runtime;
+	int period_elapsed = 0;
+	unsigned int stride, buf_pos;
+	int length;
+
+	if (atomic_read(&core->stream_started) == 0)
+		return 0;
+
+	if (!size || !substream) {
+		dprintk(1, "substream was NULL\n");
+		return -EINVAL;
+	}
+
+	runtime = substream->runtime;
+	if (!runtime || !runtime->dma_area) {
+		dprintk(1, "runtime was NULL\n");
+		return -EINVAL;
+	}
+
+	buf_pos = chip->buf_pos;
+	stride = runtime->frame_bits >> 3;
+
+	if (stride == 0) {
+		dprintk(1, "stride is zero\n");
+		return -EINVAL;
+	}
+
+	length = size / stride;
+	if (length == 0) {
+		dprintk(1, "%s: length was zero\n", __func__);
+		return -EINVAL;
+	}
+
+	dprintk(1, "Copying %d bytes at %p[%d] - buf size=%d x %d\n", size,
+		runtime->dma_area, buf_pos,
+		(unsigned int)runtime->buffer_size, stride);
+
+	if (buf_pos + length >= runtime->buffer_size) {
+		unsigned int cnt = runtime->buffer_size - buf_pos;
+		memcpy(runtime->dma_area + buf_pos * stride, buf, cnt * stride);
+		memcpy(runtime->dma_area, buf + cnt * stride,
+			length * stride - cnt * stride);
+	} else
+		memcpy(runtime->dma_area + buf_pos * stride, buf,
+			length * stride);
+
+	snd_pcm_stream_lock(substream);
+
+	chip->buf_pos += length;
+	if (chip->buf_pos >= runtime->buffer_size)
+		chip->buf_pos -= runtime->buffer_size;
+
+	chip->period_pos += length;
+	if (chip->period_pos >= runtime->period_size) {
+		chip->period_pos -= runtime->period_size;
+		period_elapsed = 1;
+	}
+
+	snd_pcm_stream_unlock(substream);
+
+	if (period_elapsed)
+		snd_pcm_period_elapsed(substream);
+
+	return 0;
+}
+
+/*
+ * hw_params callback
+ */
+static int snd_tm6000_hw_params(struct snd_pcm_substream *substream,
+			      struct snd_pcm_hw_params *hw_params)
+{
+	int size, rc;
+
+	size = params_period_bytes(hw_params) * params_periods(hw_params);
+
+	rc = dsp_buffer_alloc(substream, size);
+	if (rc < 0)
+		return rc;
+
+	return 0;
+}
+
+/*
+ * hw free callback
+ */
+static int snd_tm6000_hw_free(struct snd_pcm_substream *substream)
+{
+	struct snd_tm6000_card *chip = snd_pcm_substream_chip(substream);
+	struct tm6000_core *core = chip->core;
+
+	if (atomic_read(&core->stream_started) > 0) {
+		atomic_set(&core->stream_started, 0);
+		schedule_work(&core->wq_trigger);
+	}
+
+	dsp_buffer_free(substream);
+	return 0;
+}
+
+/*
+ * prepare callback
+ */
+static int snd_tm6000_prepare(struct snd_pcm_substream *substream)
+{
+	struct snd_tm6000_card *chip = snd_pcm_substream_chip(substream);
+
+	chip->buf_pos = 0;
+	chip->period_pos = 0;
+
+	return 0;
+}
+
+
+/*
+ * trigger callback
+ */
+static void audio_trigger(struct work_struct *work)
+{
+	struct tm6000_core *core = container_of(work, struct tm6000_core,
+						wq_trigger);
+	struct snd_tm6000_card *chip = core->adev;
+
+	if (atomic_read(&core->stream_started)) {
+		dprintk(1, "starting capture");
+		_tm6000_start_audio_dma(chip);
+	} else {
+		dprintk(1, "stopping capture");
+		_tm6000_stop_audio_dma(chip);
+	}
+}
+
+static int snd_tm6000_card_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+	struct snd_tm6000_card *chip = snd_pcm_substream_chip(substream);
+	struct tm6000_core *core = chip->core;
+	int err = 0;
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: /* fall through */
+	case SNDRV_PCM_TRIGGER_RESUME: /* fall through */
+	case SNDRV_PCM_TRIGGER_START:
+		atomic_set(&core->stream_started, 1);
+		break;
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH: /* fall through */
+	case SNDRV_PCM_TRIGGER_SUSPEND: /* fall through */
+	case SNDRV_PCM_TRIGGER_STOP:
+		atomic_set(&core->stream_started, 0);
+		break;
+	default:
+		err = -EINVAL;
+		break;
+	}
+	schedule_work(&core->wq_trigger);
+
+	return err;
+}
+/*
+ * pointer callback
+ */
+static snd_pcm_uframes_t snd_tm6000_pointer(struct snd_pcm_substream *substream)
+{
+	struct snd_tm6000_card *chip = snd_pcm_substream_chip(substream);
+
+	return chip->buf_pos;
+}
+
+static struct page *snd_pcm_get_vmalloc_page(struct snd_pcm_substream *subs,
+					     unsigned long offset)
+{
+	void *pageptr = subs->runtime->dma_area + offset;
+
+	return vmalloc_to_page(pageptr);
+}
+
+/*
+ * operators
+ */
+static struct snd_pcm_ops snd_tm6000_pcm_ops = {
+	.open = snd_tm6000_pcm_open,
+	.close = snd_tm6000_close,
+	.ioctl = snd_pcm_lib_ioctl,
+	.hw_params = snd_tm6000_hw_params,
+	.hw_free = snd_tm6000_hw_free,
+	.prepare = snd_tm6000_prepare,
+	.trigger = snd_tm6000_card_trigger,
+	.pointer = snd_tm6000_pointer,
+	.page = snd_pcm_get_vmalloc_page,
+};
+
+/*
+ * create a PCM device
+ */
+
+/* FIXME: Control interface - How to control volume/mute? */
+
+/****************************************************************************
+			Basic Flow for Sound Devices
+ ****************************************************************************/
+
+/*
+ * Alsa Constructor - Component probe
+ */
+static int tm6000_audio_init(struct tm6000_core *dev)
+{
+	struct snd_card		*card;
+	struct snd_tm6000_card	*chip;
+	int			rc;
+	static int		devnr;
+	char			component[14];
+	struct snd_pcm		*pcm;
+
+	if (!dev)
+		return 0;
+
+	if (devnr >= SNDRV_CARDS)
+		return -ENODEV;
+
+	if (!enable[devnr])
+		return -ENOENT;
+
+	rc = snd_card_new(&dev->udev->dev, index[devnr], "tm6000",
+			  THIS_MODULE, 0, &card);
+	if (rc < 0) {
+		snd_printk(KERN_ERR "cannot create card instance %d\n", devnr);
+		return rc;
+	}
+	strcpy(card->driver, "tm6000-alsa");
+	strcpy(card->shortname, "TM5600/60x0");
+	sprintf(card->longname, "TM5600/60x0 Audio at bus %d device %d",
+		dev->udev->bus->busnum, dev->udev->devnum);
+
+	sprintf(component, "USB%04x:%04x",
+		le16_to_cpu(dev->udev->descriptor.idVendor),
+		le16_to_cpu(dev->udev->descriptor.idProduct));
+	snd_component_add(card, component);
+
+	chip = kzalloc(sizeof(struct snd_tm6000_card), GFP_KERNEL);
+	if (!chip) {
+		rc = -ENOMEM;
+		goto error;
+	}
+
+	chip->core = dev;
+	chip->card = card;
+	dev->adev = chip;
+	spin_lock_init(&chip->reg_lock);
+
+	rc = snd_pcm_new(card, "TM6000 Audio", 0, 0, 1, &pcm);
+	if (rc < 0)
+		goto error_chip;
+
+	pcm->info_flags = 0;
+	pcm->private_data = chip;
+	strcpy(pcm->name, "Trident TM5600/60x0");
+
+	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &snd_tm6000_pcm_ops);
+
+	INIT_WORK(&dev->wq_trigger, audio_trigger);
+	rc = snd_card_register(card);
+	if (rc < 0)
+		goto error_chip;
+
+	dprintk(1, "Registered audio driver for %s\n", card->longname);
+
+	return 0;
+
+error_chip:
+	kfree(chip);
+	dev->adev = NULL;
+error:
+	snd_card_free(card);
+	return rc;
+}
+
+static int tm6000_audio_fini(struct tm6000_core *dev)
+{
+	struct snd_tm6000_card *chip;
+
+	if (!dev)
+		return 0;
+	chip = dev->adev;
+
+	if (!chip)
+		return 0;
+
+	if (!chip->card)
+		return 0;
+
+	snd_card_free(chip->card);
+	chip->card = NULL;
+	kfree(chip);
+	dev->adev = NULL;
+
+	return 0;
+}
+
+static struct tm6000_ops audio_ops = {
+	.type	= TM6000_AUDIO,
+	.name	= "TM6000 Audio Extension",
+	.init	= tm6000_audio_init,
+	.fini	= tm6000_audio_fini,
+	.fillbuf = tm6000_fillbuf,
+};
+
+static int __init tm6000_alsa_register(void)
+{
+	return tm6000_register_extension(&audio_ops);
+}
+
+static void __exit tm6000_alsa_unregister(void)
+{
+	tm6000_unregister_extension(&audio_ops);
+}
+
+module_init(tm6000_alsa_register);
+module_exit(tm6000_alsa_unregister);
diff --git a/kernel/drivers/media/usb/tm6000/tm6000-cards.c b/kernel/drivers/media/usb/tm6000/tm6000-cards.c
new file mode 100644
index 000000000..2e8c3afe4
--- /dev/null
+++ b/kernel/drivers/media/usb/tm6000/tm6000-cards.c
@@ -0,0 +1,1413 @@
+/*
+ *  tm6000-cards.c - driver for TM5600/TM6000/TM6010 USB video capture devices
+ *
+ *  Copyright (C) 2006-2007 Mauro Carvalho Chehab <mchehab@infradead.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation version 2
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/usb.h>
+#include <linux/slab.h>
+#include <media/v4l2-common.h>
+#include <media/tuner.h>
+#include <media/tvaudio.h>
+#include <media/i2c-addr.h>
+#include <media/rc-map.h>
+
+#include "tm6000.h"
+#include "tm6000-regs.h"
+#include "tuner-xc2028.h"
+#include "xc5000.h"
+
+#define TM6000_BOARD_UNKNOWN			0
+#define TM5600_BOARD_GENERIC			1
+#define TM6000_BOARD_GENERIC			2
+#define TM6010_BOARD_GENERIC			3
+#define TM5600_BOARD_10MOONS_UT821		4
+#define TM5600_BOARD_10MOONS_UT330		5
+#define TM6000_BOARD_ADSTECH_DUAL_TV		6
+#define TM6000_BOARD_FREECOM_AND_SIMILAR	7
+#define TM6000_BOARD_ADSTECH_MINI_DUAL_TV	8
+#define TM6010_BOARD_HAUPPAUGE_900H		9
+#define TM6010_BOARD_BEHOLD_WANDER		10
+#define TM6010_BOARD_BEHOLD_VOYAGER		11
+#define TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE	12
+#define TM6010_BOARD_TWINHAN_TU501		13
+#define TM6010_BOARD_BEHOLD_WANDER_LITE		14
+#define TM6010_BOARD_BEHOLD_VOYAGER_LITE	15
+#define TM5600_BOARD_TERRATEC_GRABSTER		16
+
+#define is_generic(model) ((model == TM6000_BOARD_UNKNOWN) || \
+			   (model == TM5600_BOARD_GENERIC) || \
+			   (model == TM6000_BOARD_GENERIC) || \
+			   (model == TM6010_BOARD_GENERIC))
+
+#define TM6000_MAXBOARDS        16
+static unsigned int card[]     = {[0 ... (TM6000_MAXBOARDS - 1)] = UNSET };
+
+module_param_array(card,  int, NULL, 0444);
+
+static unsigned long tm6000_devused;
+
+
+struct tm6000_board {
+	char            *name;
+	char		eename[16];		/* EEPROM name */
+	unsigned	eename_size;		/* size of EEPROM name */
+	unsigned	eename_pos;		/* Position where it appears at ROM */
+
+	struct tm6000_capabilities caps;
+
+	enum		tm6000_devtype type;	/* variant of the chipset */
+	int             tuner_type;     /* type of the tuner */
+	int             tuner_addr;     /* tuner address */
+	int             demod_addr;     /* demodulator address */
+
+	struct tm6000_gpio gpio;
+
+	struct tm6000_input	vinput[3];
+	struct tm6000_input	rinput;
+
+	char		*ir_codes;
+};
+
+static struct tm6000_board tm6000_boards[] = {
+	[TM6000_BOARD_UNKNOWN] = {
+		.name         = "Unknown tm6000 video grabber",
+		.caps = {
+			.has_tuner	= 1,
+			.has_eeprom	= 1,
+		},
+		.gpio = {
+			.tuner_reset	= TM6000_GPIO_1,
+		},
+		.vinput = { {
+			.type	= TM6000_INPUT_TV,
+			.vmux	= TM6000_VMUX_VIDEO_B,
+			.amux	= TM6000_AMUX_ADC1,
+			}, {
+			.type	= TM6000_INPUT_COMPOSITE1,
+			.vmux	= TM6000_VMUX_VIDEO_A,
+			.amux	= TM6000_AMUX_ADC2,
+			}, {
+			.type	= TM6000_INPUT_SVIDEO,
+			.vmux	= TM6000_VMUX_VIDEO_AB,
+			.amux	= TM6000_AMUX_ADC2,
+			},
+		},
+	},
+	[TM5600_BOARD_GENERIC] = {
+		.name         = "Generic tm5600 board",
+		.type         = TM5600,
+		.tuner_type   = TUNER_XC2028,
+		.tuner_addr   = 0xc2 >> 1,
+		.caps = {
+			.has_tuner	= 1,
+			.has_eeprom	= 1,
+		},
+		.gpio = {
+			.tuner_reset	= TM6000_GPIO_1,
+		},
+		.vinput = { {
+			.type	= TM6000_INPUT_TV,
+			.vmux	= TM6000_VMUX_VIDEO_B,
+			.amux	= TM6000_AMUX_ADC1,
+			}, {
+			.type	= TM6000_INPUT_COMPOSITE1,
+			.vmux	= TM6000_VMUX_VIDEO_A,
+			.amux	= TM6000_AMUX_ADC2,
+			}, {
+			.type	= TM6000_INPUT_SVIDEO,
+			.vmux	= TM6000_VMUX_VIDEO_AB,
+			.amux	= TM6000_AMUX_ADC2,
+			},
+		},
+	},
+	[TM6000_BOARD_GENERIC] = {
+		.name         = "Generic tm6000 board",
+		.tuner_type   = TUNER_XC2028,
+		.tuner_addr   = 0xc2 >> 1,
+		.caps = {
+			.has_tuner	= 1,
+			.has_eeprom	= 1,
+		},
+		.gpio = {
+			.tuner_reset	= TM6000_GPIO_1,
+		},
+		.vinput = { {
+			.type	= TM6000_INPUT_TV,
+			.vmux	= TM6000_VMUX_VIDEO_B,
+			.amux	= TM6000_AMUX_ADC1,
+			}, {
+			.type	= TM6000_INPUT_COMPOSITE1,
+			.vmux	= TM6000_VMUX_VIDEO_A,
+			.amux	= TM6000_AMUX_ADC2,
+			}, {
+			.type	= TM6000_INPUT_SVIDEO,
+			.vmux	= TM6000_VMUX_VIDEO_AB,
+			.amux	= TM6000_AMUX_ADC2,
+			},
+		},
+	},
+	[TM6010_BOARD_GENERIC] = {
+		.name         = "Generic tm6010 board",
+		.type         = TM6010,
+		.tuner_type   = TUNER_XC2028,
+		.tuner_addr   = 0xc2 >> 1,
+		.demod_addr   = 0x1e >> 1,
+		.caps = {
+			.has_tuner	= 1,
+			.has_dvb	= 1,
+			.has_zl10353	= 1,
+			.has_eeprom	= 1,
+			.has_remote	= 1,
+		},
+		.gpio = {
+			.tuner_reset	= TM6010_GPIO_2,
+			.tuner_on	= TM6010_GPIO_3,
+			.demod_reset	= TM6010_GPIO_1,
+			.demod_on	= TM6010_GPIO_4,
+			.power_led	= TM6010_GPIO_7,
+			.dvb_led	= TM6010_GPIO_5,
+			.ir		= TM6010_GPIO_0,
+		},
+		.vinput = { {
+			.type	= TM6000_INPUT_TV,
+			.vmux	= TM6000_VMUX_VIDEO_B,
+			.amux	= TM6000_AMUX_SIF1,
+			}, {
+			.type	= TM6000_INPUT_COMPOSITE1,
+			.vmux	= TM6000_VMUX_VIDEO_A,
+			.amux	= TM6000_AMUX_ADC2,
+			}, {
+			.type	= TM6000_INPUT_SVIDEO,
+			.vmux	= TM6000_VMUX_VIDEO_AB,
+			.amux	= TM6000_AMUX_ADC2,
+			},
+		},
+	},
+	[TM5600_BOARD_10MOONS_UT821] = {
+		.name         = "10Moons UT 821",
+		.tuner_type   = TUNER_XC2028,
+		.eename       = { '1', '0', 'M', 'O', 'O', 'N', 'S', '5', '6', '0', '0', 0xff, 0x45, 0x5b},
+		.eename_size  = 14,
+		.eename_pos   = 0x14,
+		.type         = TM5600,
+		.tuner_addr   = 0xc2 >> 1,
+		.caps = {
+			.has_tuner    = 1,
+			.has_eeprom   = 1,
+		},
+		.gpio = {
+			.tuner_reset	= TM6000_GPIO_1,
+		},
+		.vinput = { {
+			.type	= TM6000_INPUT_TV,
+			.vmux	= TM6000_VMUX_VIDEO_B,
+			.amux	= TM6000_AMUX_ADC1,
+			}, {
+			.type	= TM6000_INPUT_COMPOSITE1,
+			.vmux	= TM6000_VMUX_VIDEO_A,
+			.amux	= TM6000_AMUX_ADC2,
+			}, {
+			.type	= TM6000_INPUT_SVIDEO,
+			.vmux	= TM6000_VMUX_VIDEO_AB,
+			.amux	= TM6000_AMUX_ADC2,
+			},
+		},
+	},
+	[TM5600_BOARD_10MOONS_UT330] = {
+		.name         = "10Moons UT 330",
+		.tuner_type   = TUNER_PHILIPS_FQ1216AME_MK4,
+		.tuner_addr   = 0xc8 >> 1,
+		.caps = {
+			.has_tuner    = 1,
+			.has_dvb      = 0,
+			.has_zl10353  = 0,
+			.has_eeprom   = 1,
+		},
+		.vinput = { {
+			.type	= TM6000_INPUT_TV,
+			.vmux	= TM6000_VMUX_VIDEO_B,
+			.amux	= TM6000_AMUX_ADC1,
+			}, {
+			.type	= TM6000_INPUT_COMPOSITE1,
+			.vmux	= TM6000_VMUX_VIDEO_A,
+			.amux	= TM6000_AMUX_ADC2,
+			}, {
+			.type	= TM6000_INPUT_SVIDEO,
+			.vmux	= TM6000_VMUX_VIDEO_AB,
+			.amux	= TM6000_AMUX_ADC2,
+			},
+		},
+	},
+	[TM6000_BOARD_ADSTECH_DUAL_TV] = {
+		.name         = "ADSTECH Dual TV USB",
+		.tuner_type   = TUNER_XC2028,
+		.tuner_addr   = 0xc8 >> 1,
+		.caps = {
+			.has_tuner    = 1,
+			.has_tda9874  = 1,
+			.has_dvb      = 1,
+			.has_zl10353  = 1,
+			.has_eeprom   = 1,
+		},
+		.vinput = { {
+			.type	= TM6000_INPUT_TV,
+			.vmux	= TM6000_VMUX_VIDEO_B,
+			.amux	= TM6000_AMUX_ADC1,
+			}, {
+			.type	= TM6000_INPUT_COMPOSITE1,
+			.vmux	= TM6000_VMUX_VIDEO_A,
+			.amux	= TM6000_AMUX_ADC2,
+			}, {
+			.type	= TM6000_INPUT_SVIDEO,
+			.vmux	= TM6000_VMUX_VIDEO_AB,
+			.amux	= TM6000_AMUX_ADC2,
+			},
+		},
+	},
+	[TM6000_BOARD_FREECOM_AND_SIMILAR] = {
+		.name         = "Freecom Hybrid Stick / Moka DVB-T Receiver Dual",
+		.tuner_type   = TUNER_XC2028, /* has a XC3028 */
+		.tuner_addr   = 0xc2 >> 1,
+		.demod_addr   = 0x1e >> 1,
+		.caps = {
+			.has_tuner    = 1,
+			.has_dvb      = 1,
+			.has_zl10353  = 1,
+			.has_eeprom   = 0,
+			.has_remote   = 1,
+		},
+		.gpio = {
+			.tuner_reset	= TM6000_GPIO_4,
+		},
+		.vinput = { {
+			.type	= TM6000_INPUT_TV,
+			.vmux	= TM6000_VMUX_VIDEO_B,
+			.amux	= TM6000_AMUX_ADC1,
+			}, {
+			.type	= TM6000_INPUT_COMPOSITE1,
+			.vmux	= TM6000_VMUX_VIDEO_A,
+			.amux	= TM6000_AMUX_ADC2,
+			}, {
+			.type	= TM6000_INPUT_SVIDEO,
+			.vmux	= TM6000_VMUX_VIDEO_AB,
+			.amux	= TM6000_AMUX_ADC2,
+			},
+		},
+	},
+	[TM6000_BOARD_ADSTECH_MINI_DUAL_TV] = {
+		.name         = "ADSTECH Mini Dual TV USB",
+		.tuner_type   = TUNER_XC2028, /* has a XC3028 */
+		.tuner_addr   = 0xc8 >> 1,
+		.demod_addr   = 0x1e >> 1,
+		.caps = {
+			.has_tuner    = 1,
+			.has_dvb      = 1,
+			.has_zl10353  = 1,
+			.has_eeprom   = 0,
+		},
+		.gpio = {
+			.tuner_reset	= TM6000_GPIO_4,
+		},
+		.vinput = { {
+			.type	= TM6000_INPUT_TV,
+			.vmux	= TM6000_VMUX_VIDEO_B,
+			.amux	= TM6000_AMUX_ADC1,
+			}, {
+			.type	= TM6000_INPUT_COMPOSITE1,
+			.vmux	= TM6000_VMUX_VIDEO_A,
+			.amux	= TM6000_AMUX_ADC2,
+			}, {
+			.type	= TM6000_INPUT_SVIDEO,
+			.vmux	= TM6000_VMUX_VIDEO_AB,
+			.amux	= TM6000_AMUX_ADC2,
+			},
+		},
+	},
+	[TM6010_BOARD_HAUPPAUGE_900H] = {
+		.name         = "Hauppauge WinTV HVR-900H / WinTV USB2-Stick",
+		.eename       = { 'H', 0, 'V', 0, 'R', 0, '9', 0, '0', 0, '0', 0, 'H', 0 },
+		.eename_size  = 14,
+		.eename_pos   = 0x42,
+		.tuner_type   = TUNER_XC2028, /* has a XC3028 */
+		.tuner_addr   = 0xc2 >> 1,
+		.demod_addr   = 0x1e >> 1,
+		.type         = TM6010,
+		.ir_codes = RC_MAP_HAUPPAUGE,
+		.caps = {
+			.has_tuner    = 1,
+			.has_dvb      = 1,
+			.has_zl10353  = 1,
+			.has_eeprom   = 1,
+			.has_remote   = 1,
+		},
+		.gpio = {
+			.tuner_reset	= TM6010_GPIO_2,
+			.tuner_on	= TM6010_GPIO_3,
+			.demod_reset	= TM6010_GPIO_1,
+			.demod_on	= TM6010_GPIO_4,
+			.power_led	= TM6010_GPIO_7,
+			.dvb_led	= TM6010_GPIO_5,
+			.ir		= TM6010_GPIO_0,
+		},
+		.vinput = { {
+			.type	= TM6000_INPUT_TV,
+			.vmux	= TM6000_VMUX_VIDEO_B,
+			.amux	= TM6000_AMUX_SIF1,
+			}, {
+			.type	= TM6000_INPUT_COMPOSITE1,
+			.vmux	= TM6000_VMUX_VIDEO_A,
+			.amux	= TM6000_AMUX_ADC2,
+			}, {
+			.type	= TM6000_INPUT_SVIDEO,
+			.vmux	= TM6000_VMUX_VIDEO_AB,
+			.amux	= TM6000_AMUX_ADC2,
+			},
+		},
+	},
+	[TM6010_BOARD_BEHOLD_WANDER] = {
+		.name         = "Beholder Wander DVB-T/TV/FM USB2.0",
+		.tuner_type   = TUNER_XC5000,
+		.tuner_addr   = 0xc2 >> 1,
+		.demod_addr   = 0x1e >> 1,
+		.type         = TM6010,
+		.caps = {
+			.has_tuner      = 1,
+			.has_dvb        = 1,
+			.has_zl10353    = 1,
+			.has_eeprom     = 1,
+			.has_remote     = 1,
+			.has_radio	= 1,
+		},
+		.gpio = {
+			.tuner_reset	= TM6010_GPIO_0,
+			.demod_reset	= TM6010_GPIO_1,
+			.power_led	= TM6010_GPIO_6,
+		},
+		.vinput = { {
+			.type	= TM6000_INPUT_TV,
+			.vmux	= TM6000_VMUX_VIDEO_B,
+			.amux	= TM6000_AMUX_SIF1,
+			}, {
+			.type	= TM6000_INPUT_COMPOSITE1,
+			.vmux	= TM6000_VMUX_VIDEO_A,
+			.amux	= TM6000_AMUX_ADC2,
+			}, {
+			.type	= TM6000_INPUT_SVIDEO,
+			.vmux	= TM6000_VMUX_VIDEO_AB,
+			.amux	= TM6000_AMUX_ADC2,
+			},
+		},
+		.rinput = {
+			.type	= TM6000_INPUT_RADIO,
+			.amux	= TM6000_AMUX_ADC1,
+		},
+	},
+	[TM6010_BOARD_BEHOLD_VOYAGER] = {
+		.name         = "Beholder Voyager TV/FM USB2.0",
+		.tuner_type   = TUNER_XC5000,
+		.tuner_addr   = 0xc2 >> 1,
+		.type         = TM6010,
+		.caps = {
+			.has_tuner      = 1,
+			.has_dvb        = 0,
+			.has_zl10353    = 0,
+			.has_eeprom     = 1,
+			.has_remote     = 1,
+			.has_radio	= 1,
+		},
+		.gpio = {
+			.tuner_reset	= TM6010_GPIO_0,
+			.power_led	= TM6010_GPIO_6,
+		},
+		.vinput = { {
+			.type	= TM6000_INPUT_TV,
+			.vmux	= TM6000_VMUX_VIDEO_B,
+			.amux	= TM6000_AMUX_SIF1,
+			}, {
+			.type	= TM6000_INPUT_COMPOSITE1,
+			.vmux	= TM6000_VMUX_VIDEO_A,
+			.amux	= TM6000_AMUX_ADC2,
+			}, {
+			.type	= TM6000_INPUT_SVIDEO,
+			.vmux	= TM6000_VMUX_VIDEO_AB,
+			.amux	= TM6000_AMUX_ADC2,
+			},
+		},
+		.rinput = {
+			.type	= TM6000_INPUT_RADIO,
+			.amux	= TM6000_AMUX_ADC1,
+		},
+	},
+	[TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE] = {
+		.name         = "Terratec Cinergy Hybrid XE / Cinergy Hybrid-Stick",
+		.tuner_type   = TUNER_XC2028, /* has a XC3028 */
+		.tuner_addr   = 0xc2 >> 1,
+		.demod_addr   = 0x1e >> 1,
+		.type         = TM6010,
+		.caps = {
+			.has_tuner    = 1,
+			.has_dvb      = 1,
+			.has_zl10353  = 1,
+			.has_eeprom   = 1,
+			.has_remote   = 1,
+			.has_radio    = 1,
+		},
+		.gpio = {
+			.tuner_reset	= TM6010_GPIO_2,
+			.tuner_on	= TM6010_GPIO_3,
+			.demod_reset	= TM6010_GPIO_1,
+			.demod_on	= TM6010_GPIO_4,
+			.power_led	= TM6010_GPIO_7,
+			.dvb_led	= TM6010_GPIO_5,
+			.ir		= TM6010_GPIO_0,
+		},
+		.ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS,
+		.vinput = { {
+			.type	= TM6000_INPUT_TV,
+			.vmux	= TM6000_VMUX_VIDEO_B,
+			.amux	= TM6000_AMUX_SIF1,
+			}, {
+			.type	= TM6000_INPUT_COMPOSITE1,
+			.vmux	= TM6000_VMUX_VIDEO_A,
+			.amux	= TM6000_AMUX_ADC2,
+			}, {
+			.type	= TM6000_INPUT_SVIDEO,
+			.vmux	= TM6000_VMUX_VIDEO_AB,
+			.amux	= TM6000_AMUX_ADC2,
+			},
+		},
+		.rinput = {
+			.type = TM6000_INPUT_RADIO,
+			.amux = TM6000_AMUX_SIF1,
+		},
+	},
+	[TM5600_BOARD_TERRATEC_GRABSTER] = {
+		.name         = "Terratec Grabster AV 150/250 MX",
+		.type         = TM5600,
+		.tuner_type   = TUNER_ABSENT,
+		.vinput = { {
+			.type	= TM6000_INPUT_TV,
+			.vmux	= TM6000_VMUX_VIDEO_B,
+			.amux	= TM6000_AMUX_ADC1,
+			}, {
+			.type	= TM6000_INPUT_COMPOSITE1,
+			.vmux	= TM6000_VMUX_VIDEO_A,
+			.amux	= TM6000_AMUX_ADC2,
+			}, {
+			.type	= TM6000_INPUT_SVIDEO,
+			.vmux	= TM6000_VMUX_VIDEO_AB,
+			.amux	= TM6000_AMUX_ADC2,
+			},
+		},
+	},
+	[TM6010_BOARD_TWINHAN_TU501] = {
+		.name         = "Twinhan TU501(704D1)",
+		.tuner_type   = TUNER_XC2028, /* has a XC3028 */
+		.tuner_addr   = 0xc2 >> 1,
+		.demod_addr   = 0x1e >> 1,
+		.type         = TM6010,
+		.caps = {
+			.has_tuner    = 1,
+			.has_dvb      = 1,
+			.has_zl10353  = 1,
+			.has_eeprom   = 1,
+			.has_remote   = 1,
+		},
+		.gpio = {
+			.tuner_reset	= TM6010_GPIO_2,
+			.tuner_on	= TM6010_GPIO_3,
+			.demod_reset	= TM6010_GPIO_1,
+			.demod_on	= TM6010_GPIO_4,
+			.power_led	= TM6010_GPIO_7,
+			.dvb_led	= TM6010_GPIO_5,
+			.ir		= TM6010_GPIO_0,
+		},
+		.vinput = { {
+			.type	= TM6000_INPUT_TV,
+			.vmux	= TM6000_VMUX_VIDEO_B,
+			.amux	= TM6000_AMUX_SIF1,
+			}, {
+			.type	= TM6000_INPUT_COMPOSITE1,
+			.vmux	= TM6000_VMUX_VIDEO_A,
+			.amux	= TM6000_AMUX_ADC2,
+			}, {
+			.type	= TM6000_INPUT_SVIDEO,
+			.vmux	= TM6000_VMUX_VIDEO_AB,
+			.amux	= TM6000_AMUX_ADC2,
+			},
+		},
+	},
+	[TM6010_BOARD_BEHOLD_WANDER_LITE] = {
+		.name         = "Beholder Wander Lite DVB-T/TV/FM USB2.0",
+		.tuner_type   = TUNER_XC5000,
+		.tuner_addr   = 0xc2 >> 1,
+		.demod_addr   = 0x1e >> 1,
+		.type         = TM6010,
+		.caps = {
+			.has_tuner      = 1,
+			.has_dvb        = 1,
+			.has_zl10353    = 1,
+			.has_eeprom     = 1,
+			.has_remote     = 0,
+			.has_radio	= 1,
+		},
+		.gpio = {
+			.tuner_reset	= TM6010_GPIO_0,
+			.demod_reset	= TM6010_GPIO_1,
+			.power_led	= TM6010_GPIO_6,
+		},
+		.vinput = { {
+			.type	= TM6000_INPUT_TV,
+			.vmux	= TM6000_VMUX_VIDEO_B,
+			.amux	= TM6000_AMUX_SIF1,
+			},
+		},
+		.rinput = {
+			.type	= TM6000_INPUT_RADIO,
+			.amux	= TM6000_AMUX_ADC1,
+		},
+	},
+	[TM6010_BOARD_BEHOLD_VOYAGER_LITE] = {
+		.name         = "Beholder Voyager Lite TV/FM USB2.0",
+		.tuner_type   = TUNER_XC5000,
+		.tuner_addr   = 0xc2 >> 1,
+		.type         = TM6010,
+		.caps = {
+			.has_tuner      = 1,
+			.has_dvb        = 0,
+			.has_zl10353    = 0,
+			.has_eeprom     = 1,
+			.has_remote     = 0,
+			.has_radio	= 1,
+		},
+		.gpio = {
+			.tuner_reset	= TM6010_GPIO_0,
+			.power_led	= TM6010_GPIO_6,
+		},
+		.vinput = { {
+			.type	= TM6000_INPUT_TV,
+			.vmux	= TM6000_VMUX_VIDEO_B,
+			.amux	= TM6000_AMUX_SIF1,
+			},
+		},
+		.rinput = {
+			.type	= TM6000_INPUT_RADIO,
+			.amux	= TM6000_AMUX_ADC1,
+		},
+	},
+};
+
+/* table of devices that work with this driver */
+static struct usb_device_id tm6000_id_table[] = {
+	{ USB_DEVICE(0x6000, 0x0001), .driver_info = TM5600_BOARD_GENERIC },
+	{ USB_DEVICE(0x6000, 0x0002), .driver_info = TM6010_BOARD_GENERIC },
+	{ USB_DEVICE(0x06e1, 0xf332), .driver_info = TM6000_BOARD_ADSTECH_DUAL_TV },
+	{ USB_DEVICE(0x14aa, 0x0620), .driver_info = TM6000_BOARD_FREECOM_AND_SIMILAR },
+	{ USB_DEVICE(0x06e1, 0xb339), .driver_info = TM6000_BOARD_ADSTECH_MINI_DUAL_TV },
+	{ USB_DEVICE(0x2040, 0x6600), .driver_info = TM6010_BOARD_HAUPPAUGE_900H },
+	{ USB_DEVICE(0x2040, 0x6601), .driver_info = TM6010_BOARD_HAUPPAUGE_900H },
+	{ USB_DEVICE(0x2040, 0x6610), .driver_info = TM6010_BOARD_HAUPPAUGE_900H },
+	{ USB_DEVICE(0x2040, 0x6611), .driver_info = TM6010_BOARD_HAUPPAUGE_900H },
+	{ USB_DEVICE(0x6000, 0xdec0), .driver_info = TM6010_BOARD_BEHOLD_WANDER },
+	{ USB_DEVICE(0x6000, 0xdec1), .driver_info = TM6010_BOARD_BEHOLD_VOYAGER },
+	{ USB_DEVICE(0x0ccd, 0x0086), .driver_info = TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE },
+	{ USB_DEVICE(0x0ccd, 0x00A5), .driver_info = TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE },
+	{ USB_DEVICE(0x0ccd, 0x0079), .driver_info = TM5600_BOARD_TERRATEC_GRABSTER },
+	{ USB_DEVICE(0x13d3, 0x3240), .driver_info = TM6010_BOARD_TWINHAN_TU501 },
+	{ USB_DEVICE(0x13d3, 0x3241), .driver_info = TM6010_BOARD_TWINHAN_TU501 },
+	{ USB_DEVICE(0x13d3, 0x3243), .driver_info = TM6010_BOARD_TWINHAN_TU501 },
+	{ USB_DEVICE(0x13d3, 0x3264), .driver_info = TM6010_BOARD_TWINHAN_TU501 },
+	{ USB_DEVICE(0x6000, 0xdec2), .driver_info = TM6010_BOARD_BEHOLD_WANDER_LITE },
+	{ USB_DEVICE(0x6000, 0xdec3), .driver_info = TM6010_BOARD_BEHOLD_VOYAGER_LITE },
+	{ }
+};
+MODULE_DEVICE_TABLE(usb, tm6000_id_table);
+
+/* Control power led for show some activity */
+void tm6000_flash_led(struct tm6000_core *dev, u8 state)
+{
+	/* Power LED unconfigured */
+	if (!dev->gpio.power_led)
+		return;
+
+	/* ON Power LED */
+	if (state) {
+		switch (dev->model) {
+		case TM6010_BOARD_HAUPPAUGE_900H:
+		case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
+		case TM6010_BOARD_TWINHAN_TU501:
+			tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+				dev->gpio.power_led, 0x00);
+			break;
+		case TM6010_BOARD_BEHOLD_WANDER:
+		case TM6010_BOARD_BEHOLD_VOYAGER:
+		case TM6010_BOARD_BEHOLD_WANDER_LITE:
+		case TM6010_BOARD_BEHOLD_VOYAGER_LITE:
+			tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+				dev->gpio.power_led, 0x01);
+			break;
+		}
+	}
+	/* OFF Power LED */
+	else {
+		switch (dev->model) {
+		case TM6010_BOARD_HAUPPAUGE_900H:
+		case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
+		case TM6010_BOARD_TWINHAN_TU501:
+			tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+				dev->gpio.power_led, 0x01);
+			break;
+		case TM6010_BOARD_BEHOLD_WANDER:
+		case TM6010_BOARD_BEHOLD_VOYAGER:
+		case TM6010_BOARD_BEHOLD_WANDER_LITE:
+		case TM6010_BOARD_BEHOLD_VOYAGER_LITE:
+			tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+				dev->gpio.power_led, 0x00);
+			break;
+		}
+	}
+}
+
+/* Tuner callback to provide the proper gpio changes needed for xc5000 */
+int tm6000_xc5000_callback(void *ptr, int component, int command, int arg)
+{
+	int rc = 0;
+	struct tm6000_core *dev = ptr;
+
+	if (dev->tuner_type != TUNER_XC5000)
+		return 0;
+
+	switch (command) {
+	case XC5000_TUNER_RESET:
+		tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+			       dev->gpio.tuner_reset, 0x01);
+		msleep(15);
+		tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+			       dev->gpio.tuner_reset, 0x00);
+		msleep(15);
+		tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+			       dev->gpio.tuner_reset, 0x01);
+		break;
+	}
+	return rc;
+}
+EXPORT_SYMBOL_GPL(tm6000_xc5000_callback);
+
+/* Tuner callback to provide the proper gpio changes needed for xc2028 */
+
+int tm6000_tuner_callback(void *ptr, int component, int command, int arg)
+{
+	int rc = 0;
+	struct tm6000_core *dev = ptr;
+
+	if (dev->tuner_type != TUNER_XC2028)
+		return 0;
+
+	switch (command) {
+	case XC2028_RESET_CLK:
+		tm6000_ir_wait(dev, 0);
+
+		tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT,
+					0x02, arg);
+		msleep(10);
+		rc = tm6000_i2c_reset(dev, 10);
+		break;
+	case XC2028_TUNER_RESET:
+		/* Reset codes during load firmware */
+		switch (arg) {
+		case 0:
+			/* newer tuner can faster reset */
+			switch (dev->model) {
+			case TM5600_BOARD_10MOONS_UT821:
+				tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+					       dev->gpio.tuner_reset, 0x01);
+				tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+					       0x300, 0x01);
+				msleep(10);
+				tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+					       dev->gpio.tuner_reset, 0x00);
+				tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+					       0x300, 0x00);
+				msleep(10);
+				tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+					       dev->gpio.tuner_reset, 0x01);
+				tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+					       0x300, 0x01);
+				break;
+			case TM6010_BOARD_HAUPPAUGE_900H:
+			case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
+			case TM6010_BOARD_TWINHAN_TU501:
+				tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+					       dev->gpio.tuner_reset, 0x01);
+				msleep(60);
+				tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+					       dev->gpio.tuner_reset, 0x00);
+				msleep(75);
+				tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+					       dev->gpio.tuner_reset, 0x01);
+				msleep(60);
+				break;
+			default:
+				tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+					       dev->gpio.tuner_reset, 0x00);
+				msleep(130);
+				tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+					       dev->gpio.tuner_reset, 0x01);
+				msleep(130);
+				break;
+			}
+
+			tm6000_ir_wait(dev, 1);
+			break;
+		case 1:
+			tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT,
+						0x02, 0x01);
+			msleep(10);
+			break;
+		case 2:
+			rc = tm6000_i2c_reset(dev, 100);
+			break;
+		}
+		break;
+	case XC2028_I2C_FLUSH:
+		tm6000_set_reg(dev, REQ_50_SET_START, 0, 0);
+		tm6000_set_reg(dev, REQ_51_SET_STOP, 0, 0);
+		break;
+	}
+	return rc;
+}
+EXPORT_SYMBOL_GPL(tm6000_tuner_callback);
+
+int tm6000_cards_setup(struct tm6000_core *dev)
+{
+	/*
+	 * Board-specific initialization sequence. Handles all GPIO
+	 * initialization sequences that are board-specific.
+	 * Up to now, all found devices use GPIO1 and GPIO4 at the same way.
+	 * Probably, they're all based on some reference device. Due to that,
+	 * there's a common routine at the end to handle those GPIO's. Devices
+	 * that use different pinups or init sequences can just return at
+	 * the board-specific session.
+	 */
+	switch (dev->model) {
+	case TM6010_BOARD_HAUPPAUGE_900H:
+	case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
+	case TM6010_BOARD_TWINHAN_TU501:
+	case TM6010_BOARD_GENERIC:
+		/* Turn xceive 3028 on */
+		tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.tuner_on, 0x01);
+		msleep(15);
+		/* Turn zarlink zl10353 on */
+		tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_on, 0x00);
+		msleep(15);
+		/* Reset zarlink zl10353 */
+		tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x00);
+		msleep(50);
+		tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x01);
+		msleep(15);
+		/* Turn zarlink zl10353 off */
+		tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_on, 0x01);
+		msleep(15);
+		/* ir ? */
+		tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.ir, 0x01);
+		msleep(15);
+		/* Power led on (blue) */
+		tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.power_led, 0x00);
+		msleep(15);
+		/* DVB led off (orange) */
+		tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.dvb_led, 0x01);
+		msleep(15);
+		/* Turn zarlink zl10353 on */
+		tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_on, 0x00);
+		msleep(15);
+		break;
+	case TM6010_BOARD_BEHOLD_WANDER:
+	case TM6010_BOARD_BEHOLD_WANDER_LITE:
+		/* Power led on (blue) */
+		tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.power_led, 0x01);
+		msleep(15);
+		/* Reset zarlink zl10353 */
+		tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x00);
+		msleep(50);
+		tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x01);
+		msleep(15);
+		break;
+	case TM6010_BOARD_BEHOLD_VOYAGER:
+	case TM6010_BOARD_BEHOLD_VOYAGER_LITE:
+		/* Power led on (blue) */
+		tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.power_led, 0x01);
+		msleep(15);
+		break;
+	default:
+		break;
+	}
+
+	/*
+	 * Default initialization. Most of the devices seem to use GPIO1
+	 * and GPIO4.on the same way, so, this handles the common sequence
+	 * used by most devices.
+	 * If a device uses a different sequence or different GPIO pins for
+	 * reset, just add the code at the board-specific part
+	 */
+
+	if (dev->gpio.tuner_reset) {
+		int rc;
+		int i;
+
+		for (i = 0; i < 2; i++) {
+			rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+						dev->gpio.tuner_reset, 0x00);
+			if (rc < 0) {
+				printk(KERN_ERR "Error %i doing tuner reset\n", rc);
+				return rc;
+			}
+
+			msleep(10); /* Just to be conservative */
+			rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+						dev->gpio.tuner_reset, 0x01);
+			if (rc < 0) {
+				printk(KERN_ERR "Error %i doing tuner reset\n", rc);
+				return rc;
+			}
+		}
+	} else {
+		printk(KERN_ERR "Tuner reset is not configured\n");
+		return -1;
+	}
+
+	msleep(50);
+
+	return 0;
+};
+
+static void tm6000_config_tuner(struct tm6000_core *dev)
+{
+	struct tuner_setup tun_setup;
+
+	/* Load tuner module */
+	v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
+		"tuner", dev->tuner_addr, NULL);
+
+	memset(&tun_setup, 0, sizeof(tun_setup));
+	tun_setup.type = dev->tuner_type;
+	tun_setup.addr = dev->tuner_addr;
+
+	tun_setup.mode_mask = 0;
+	if (dev->caps.has_tuner)
+		tun_setup.mode_mask |= (T_ANALOG_TV | T_RADIO);
+
+	switch (dev->tuner_type) {
+	case TUNER_XC2028:
+		tun_setup.tuner_callback = tm6000_tuner_callback;
+		break;
+	case TUNER_XC5000:
+		tun_setup.tuner_callback = tm6000_xc5000_callback;
+		break;
+	}
+
+	v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup);
+
+	switch (dev->tuner_type) {
+	case TUNER_XC2028: {
+		struct v4l2_priv_tun_config xc2028_cfg;
+		struct xc2028_ctrl ctl;
+
+		memset(&xc2028_cfg, 0, sizeof(xc2028_cfg));
+		memset(&ctl, 0, sizeof(ctl));
+
+		ctl.demod = XC3028_FE_ZARLINK456;
+
+		xc2028_cfg.tuner = TUNER_XC2028;
+		xc2028_cfg.priv  = &ctl;
+
+		switch (dev->model) {
+		case TM6010_BOARD_HAUPPAUGE_900H:
+		case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
+		case TM6010_BOARD_TWINHAN_TU501:
+			ctl.max_len = 80;
+			ctl.fname = "xc3028L-v36.fw";
+			break;
+		default:
+			if (dev->dev_type == TM6010)
+				ctl.fname = "xc3028-v27.fw";
+			else
+				ctl.fname = "xc3028-v24.fw";
+		}
+
+		printk(KERN_INFO "Setting firmware parameters for xc2028\n");
+		v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config,
+				     &xc2028_cfg);
+
+		}
+		break;
+	case TUNER_XC5000:
+		{
+		struct v4l2_priv_tun_config  xc5000_cfg;
+		struct xc5000_config ctl = {
+			.i2c_address = dev->tuner_addr,
+			.if_khz      = 4570,
+			.radio_input = XC5000_RADIO_FM1_MONO,
+			};
+
+		xc5000_cfg.tuner = TUNER_XC5000;
+		xc5000_cfg.priv  = &ctl;
+
+		v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config,
+				     &xc5000_cfg);
+		}
+		break;
+	default:
+		printk(KERN_INFO "Unknown tuner type. Tuner is not configured.\n");
+		break;
+	}
+}
+
+static int fill_board_specific_data(struct tm6000_core *dev)
+{
+	int rc;
+
+	dev->dev_type   = tm6000_boards[dev->model].type;
+	dev->tuner_type = tm6000_boards[dev->model].tuner_type;
+	dev->tuner_addr = tm6000_boards[dev->model].tuner_addr;
+
+	dev->gpio = tm6000_boards[dev->model].gpio;
+
+	dev->ir_codes = tm6000_boards[dev->model].ir_codes;
+
+	dev->demod_addr = tm6000_boards[dev->model].demod_addr;
+
+	dev->caps = tm6000_boards[dev->model].caps;
+
+	dev->vinput[0] = tm6000_boards[dev->model].vinput[0];
+	dev->vinput[1] = tm6000_boards[dev->model].vinput[1];
+	dev->vinput[2] = tm6000_boards[dev->model].vinput[2];
+	dev->rinput = tm6000_boards[dev->model].rinput;
+
+	/* setup per-model quirks */
+	switch (dev->model) {
+	case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
+	case TM6010_BOARD_HAUPPAUGE_900H:
+		dev->quirks |= TM6000_QUIRK_NO_USB_DELAY;
+		break;
+
+	default:
+		break;
+	}
+
+	/* initialize hardware */
+	rc = tm6000_init(dev);
+	if (rc < 0)
+		return rc;
+
+	return v4l2_device_register(&dev->udev->dev, &dev->v4l2_dev);
+}
+
+
+static void use_alternative_detection_method(struct tm6000_core *dev)
+{
+	int i, model = -1;
+
+	if (!dev->eedata_size)
+		return;
+
+	for (i = 0; i < ARRAY_SIZE(tm6000_boards); i++) {
+		if (!tm6000_boards[i].eename_size)
+			continue;
+		if (dev->eedata_size < tm6000_boards[i].eename_pos +
+				       tm6000_boards[i].eename_size)
+			continue;
+
+		if (!memcmp(&dev->eedata[tm6000_boards[i].eename_pos],
+			    tm6000_boards[i].eename,
+			    tm6000_boards[i].eename_size)) {
+			model = i;
+			break;
+		}
+	}
+	if (model < 0) {
+		printk(KERN_INFO "Device has eeprom but is currently unknown\n");
+		return;
+	}
+
+	dev->model = model;
+
+	printk(KERN_INFO "Device identified via eeprom as %s (type = %d)\n",
+	       tm6000_boards[model].name, model);
+}
+
+#if defined(CONFIG_MODULES) && defined(MODULE)
+static void request_module_async(struct work_struct *work)
+{
+	struct tm6000_core *dev = container_of(work, struct tm6000_core,
+					       request_module_wk);
+
+	request_module("tm6000-alsa");
+
+	if (dev->caps.has_dvb)
+		request_module("tm6000-dvb");
+}
+
+static void request_modules(struct tm6000_core *dev)
+{
+	INIT_WORK(&dev->request_module_wk, request_module_async);
+	schedule_work(&dev->request_module_wk);
+}
+
+static void flush_request_modules(struct tm6000_core *dev)
+{
+	flush_work(&dev->request_module_wk);
+}
+#else
+#define request_modules(dev)
+#define flush_request_modules(dev)
+#endif /* CONFIG_MODULES */
+
+static int tm6000_init_dev(struct tm6000_core *dev)
+{
+	struct v4l2_frequency f;
+	int rc = 0;
+
+	mutex_init(&dev->lock);
+	mutex_lock(&dev->lock);
+
+	if (!is_generic(dev->model)) {
+		rc = fill_board_specific_data(dev);
+		if (rc < 0)
+			goto err;
+
+		/* register i2c bus */
+		rc = tm6000_i2c_register(dev);
+		if (rc < 0)
+			goto err;
+	} else {
+		/* register i2c bus */
+		rc = tm6000_i2c_register(dev);
+		if (rc < 0)
+			goto err;
+
+		use_alternative_detection_method(dev);
+
+		rc = fill_board_specific_data(dev);
+		if (rc < 0)
+			goto err;
+	}
+
+	/* Default values for STD and resolutions */
+	dev->width = 720;
+	dev->height = 480;
+	dev->norm = V4L2_STD_NTSC_M;
+
+	/* Configure tuner */
+	tm6000_config_tuner(dev);
+
+	/* Set video standard */
+	v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_std, dev->norm);
+
+	/* Set tuner frequency - also loads firmware on xc2028/xc3028 */
+	f.tuner = 0;
+	f.type = V4L2_TUNER_ANALOG_TV;
+	f.frequency = 3092;	/* 193.25 MHz */
+	dev->freq = f.frequency;
+	v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, &f);
+
+	if (dev->caps.has_tda9874)
+		v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
+			"tvaudio", I2C_ADDR_TDA9874, NULL);
+
+	/* register and initialize V4L2 */
+	rc = tm6000_v4l2_register(dev);
+	if (rc < 0)
+		goto err;
+
+	tm6000_add_into_devlist(dev);
+	tm6000_init_extension(dev);
+
+	tm6000_ir_init(dev);
+
+	request_modules(dev);
+
+	mutex_unlock(&dev->lock);
+	return 0;
+
+err:
+	mutex_unlock(&dev->lock);
+	return rc;
+}
+
+/* high bandwidth multiplier, as encoded in highspeed endpoint descriptors */
+#define hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03))
+
+static void get_max_endpoint(struct usb_device *udev,
+			     struct usb_host_interface *alt,
+			     char *msgtype,
+			     struct usb_host_endpoint *curr_e,
+			     struct tm6000_endpoint *tm_ep)
+{
+	u16 tmp = le16_to_cpu(curr_e->desc.wMaxPacketSize);
+	unsigned int size = tmp & 0x7ff;
+
+	if (udev->speed == USB_SPEED_HIGH)
+		size = size * hb_mult(tmp);
+
+	if (size > tm_ep->maxsize) {
+		tm_ep->endp = curr_e;
+		tm_ep->maxsize = size;
+		tm_ep->bInterfaceNumber = alt->desc.bInterfaceNumber;
+		tm_ep->bAlternateSetting = alt->desc.bAlternateSetting;
+
+		printk(KERN_INFO "tm6000: %s endpoint: 0x%02x (max size=%u bytes)\n",
+					msgtype, curr_e->desc.bEndpointAddress,
+					size);
+	}
+}
+
+/*
+ * tm6000_usb_probe()
+ * checks for supported devices
+ */
+static int tm6000_usb_probe(struct usb_interface *interface,
+			    const struct usb_device_id *id)
+{
+	struct usb_device *usbdev;
+	struct tm6000_core *dev = NULL;
+	int i, rc = 0;
+	int nr = 0;
+	char *speed;
+
+	usbdev = usb_get_dev(interface_to_usbdev(interface));
+
+	/* Selects the proper interface */
+	rc = usb_set_interface(usbdev, 0, 1);
+	if (rc < 0)
+		goto err;
+
+	/* Check to see next free device and mark as used */
+	nr = find_first_zero_bit(&tm6000_devused, TM6000_MAXBOARDS);
+	if (nr >= TM6000_MAXBOARDS) {
+		printk(KERN_ERR "tm6000: Supports only %i tm60xx boards.\n", TM6000_MAXBOARDS);
+		usb_put_dev(usbdev);
+		return -ENOMEM;
+	}
+
+	/* Create and initialize dev struct */
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (dev == NULL) {
+		printk(KERN_ERR "tm6000" ": out of memory!\n");
+		usb_put_dev(usbdev);
+		return -ENOMEM;
+	}
+	spin_lock_init(&dev->slock);
+	mutex_init(&dev->usb_lock);
+
+	/* Increment usage count */
+	set_bit(nr, &tm6000_devused);
+	snprintf(dev->name, 29, "tm6000 #%d", nr);
+
+	dev->model = id->driver_info;
+	if (card[nr] < ARRAY_SIZE(tm6000_boards))
+		dev->model = card[nr];
+
+	dev->udev = usbdev;
+	dev->devno = nr;
+
+	switch (usbdev->speed) {
+	case USB_SPEED_LOW:
+		speed = "1.5";
+		break;
+	case USB_SPEED_UNKNOWN:
+	case USB_SPEED_FULL:
+		speed = "12";
+		break;
+	case USB_SPEED_HIGH:
+		speed = "480";
+		break;
+	default:
+		speed = "unknown";
+	}
+
+	/* Get endpoints */
+	for (i = 0; i < interface->num_altsetting; i++) {
+		int ep;
+
+		for (ep = 0; ep < interface->altsetting[i].desc.bNumEndpoints; ep++) {
+			struct usb_host_endpoint	*e;
+			int dir_out;
+
+			e = &interface->altsetting[i].endpoint[ep];
+
+			dir_out = ((e->desc.bEndpointAddress &
+					USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT);
+
+			printk(KERN_INFO "tm6000: alt %d, interface %i, class %i\n",
+			       i,
+			       interface->altsetting[i].desc.bInterfaceNumber,
+			       interface->altsetting[i].desc.bInterfaceClass);
+
+			switch (e->desc.bmAttributes) {
+			case USB_ENDPOINT_XFER_BULK:
+				if (!dir_out) {
+					get_max_endpoint(usbdev,
+							 &interface->altsetting[i],
+							 "Bulk IN", e,
+							 &dev->bulk_in);
+				} else {
+					get_max_endpoint(usbdev,
+							 &interface->altsetting[i],
+							 "Bulk OUT", e,
+							 &dev->bulk_out);
+				}
+				break;
+			case USB_ENDPOINT_XFER_ISOC:
+				if (!dir_out) {
+					get_max_endpoint(usbdev,
+							 &interface->altsetting[i],
+							 "ISOC IN", e,
+							 &dev->isoc_in);
+				} else {
+					get_max_endpoint(usbdev,
+							 &interface->altsetting[i],
+							 "ISOC OUT", e,
+							 &dev->isoc_out);
+				}
+				break;
+			case USB_ENDPOINT_XFER_INT:
+				if (!dir_out) {
+					get_max_endpoint(usbdev,
+							&interface->altsetting[i],
+							"INT IN", e,
+							&dev->int_in);
+				} else {
+					get_max_endpoint(usbdev,
+							&interface->altsetting[i],
+							"INT OUT", e,
+							&dev->int_out);
+				}
+				break;
+			}
+		}
+	}
+
+
+	printk(KERN_INFO "tm6000: New video device @ %s Mbps (%04x:%04x, ifnum %d)\n",
+		speed,
+		le16_to_cpu(dev->udev->descriptor.idVendor),
+		le16_to_cpu(dev->udev->descriptor.idProduct),
+		interface->altsetting->desc.bInterfaceNumber);
+
+/* check if the the device has the iso in endpoint at the correct place */
+	if (!dev->isoc_in.endp) {
+		printk(KERN_ERR "tm6000: probing error: no IN ISOC endpoint!\n");
+		rc = -ENODEV;
+
+		goto err;
+	}
+
+	/* save our data pointer in this interface device */
+	usb_set_intfdata(interface, dev);
+
+	printk(KERN_INFO "tm6000: Found %s\n", tm6000_boards[dev->model].name);
+
+	rc = tm6000_init_dev(dev);
+	if (rc < 0)
+		goto err;
+
+	return 0;
+
+err:
+	printk(KERN_ERR "tm6000: Error %d while registering\n", rc);
+
+	clear_bit(nr, &tm6000_devused);
+	usb_put_dev(usbdev);
+
+	kfree(dev);
+	return rc;
+}
+
+/*
+ * tm6000_usb_disconnect()
+ * called when the device gets diconencted
+ * video device will be unregistered on v4l2_close in case it is still open
+ */
+static void tm6000_usb_disconnect(struct usb_interface *interface)
+{
+	struct tm6000_core *dev = usb_get_intfdata(interface);
+	usb_set_intfdata(interface, NULL);
+
+	if (!dev)
+		return;
+
+	printk(KERN_INFO "tm6000: disconnecting %s\n", dev->name);
+
+	flush_request_modules(dev);
+
+	tm6000_ir_fini(dev);
+
+	if (dev->gpio.power_led) {
+		switch (dev->model) {
+		case TM6010_BOARD_HAUPPAUGE_900H:
+		case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
+		case TM6010_BOARD_TWINHAN_TU501:
+			/* Power led off */
+			tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+				dev->gpio.power_led, 0x01);
+			msleep(15);
+			break;
+		case TM6010_BOARD_BEHOLD_WANDER:
+		case TM6010_BOARD_BEHOLD_VOYAGER:
+		case TM6010_BOARD_BEHOLD_WANDER_LITE:
+		case TM6010_BOARD_BEHOLD_VOYAGER_LITE:
+			/* Power led off */
+			tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+				dev->gpio.power_led, 0x00);
+			msleep(15);
+			break;
+		}
+	}
+	tm6000_v4l2_unregister(dev);
+
+	tm6000_i2c_unregister(dev);
+
+	v4l2_device_unregister(&dev->v4l2_dev);
+
+	dev->state |= DEV_DISCONNECTED;
+
+	usb_put_dev(dev->udev);
+
+	tm6000_close_extension(dev);
+	tm6000_remove_from_devlist(dev);
+
+	clear_bit(dev->devno, &tm6000_devused);
+	kfree(dev);
+}
+
+static struct usb_driver tm6000_usb_driver = {
+		.name = "tm6000",
+		.probe = tm6000_usb_probe,
+		.disconnect = tm6000_usb_disconnect,
+		.id_table = tm6000_id_table,
+};
+
+module_usb_driver(tm6000_usb_driver);
+
+MODULE_DESCRIPTION("Trident TVMaster TM5600/TM6000/TM6010 USB2 adapter");
+MODULE_AUTHOR("Mauro Carvalho Chehab");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/media/usb/tm6000/tm6000-core.c b/kernel/drivers/media/usb/tm6000/tm6000-core.c
new file mode 100644
index 000000000..7c32353c5
--- /dev/null
+++ b/kernel/drivers/media/usb/tm6000/tm6000-core.c
@@ -0,0 +1,938 @@
+/*
+ *  tm6000-core.c - driver for TM5600/TM6000/TM6010 USB video capture devices
+ *
+ *  Copyright (C) 2006-2007 Mauro Carvalho Chehab <mchehab@infradead.org>
+ *
+ *  Copyright (C) 2007 Michel Ludwig <michel.ludwig@gmail.com>
+ *      - DVB-T support
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation version 2
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+#include <linux/i2c.h>
+#include "tm6000.h"
+#include "tm6000-regs.h"
+#include <media/v4l2-common.h>
+#include <media/tuner.h>
+
+#define USB_TIMEOUT	(5 * HZ) /* ms */
+
+int tm6000_read_write_usb(struct tm6000_core *dev, u8 req_type, u8 req,
+			  u16 value, u16 index, u8 *buf, u16 len)
+{
+	int          ret, i;
+	unsigned int pipe;
+	u8	     *data = NULL;
+	int delay = 5000;
+
+	if (len) {
+		data = kzalloc(len, GFP_KERNEL);
+		if (!data)
+			return -ENOMEM;
+	}
+
+	mutex_lock(&dev->usb_lock);
+
+	if (req_type & USB_DIR_IN)
+		pipe = usb_rcvctrlpipe(dev->udev, 0);
+	else {
+		pipe = usb_sndctrlpipe(dev->udev, 0);
+		memcpy(data, buf, len);
+	}
+
+	if (tm6000_debug & V4L2_DEBUG_I2C) {
+		printk(KERN_DEBUG "(dev %p, pipe %08x): ", dev->udev, pipe);
+
+		printk(KERN_CONT "%s: %02x %02x %02x %02x %02x %02x %02x %02x ",
+			(req_type & USB_DIR_IN) ? " IN" : "OUT",
+			req_type, req, value&0xff, value>>8, index&0xff,
+			index>>8, len&0xff, len>>8);
+
+		if (!(req_type & USB_DIR_IN)) {
+			printk(KERN_CONT ">>> ");
+			for (i = 0; i < len; i++)
+				printk(KERN_CONT " %02x", buf[i]);
+			printk(KERN_CONT "\n");
+		}
+	}
+
+	ret = usb_control_msg(dev->udev, pipe, req, req_type, value, index,
+			      data, len, USB_TIMEOUT);
+
+	if (req_type &  USB_DIR_IN)
+		memcpy(buf, data, len);
+
+	if (tm6000_debug & V4L2_DEBUG_I2C) {
+		if (ret < 0) {
+			if (req_type &  USB_DIR_IN)
+				printk(KERN_DEBUG "<<< (len=%d)\n", len);
+
+			printk(KERN_CONT "%s: Error #%d\n", __func__, ret);
+		} else if (req_type &  USB_DIR_IN) {
+			printk(KERN_CONT "<<< ");
+			for (i = 0; i < len; i++)
+				printk(KERN_CONT " %02x", buf[i]);
+			printk(KERN_CONT "\n");
+		}
+	}
+
+	kfree(data);
+
+	if (dev->quirks & TM6000_QUIRK_NO_USB_DELAY)
+		delay = 0;
+
+	if (req == REQ_16_SET_GET_I2C_WR1_RDN && !(req_type & USB_DIR_IN)) {
+		unsigned int tsleep;
+		/* Calculate delay time, 14000us for 64 bytes */
+		tsleep = (len * 200) + 200;
+		if (tsleep < delay)
+			tsleep = delay;
+		usleep_range(tsleep, tsleep + 1000);
+	}
+	else if (delay)
+		usleep_range(delay, delay + 1000);
+
+	mutex_unlock(&dev->usb_lock);
+	return ret;
+}
+
+int tm6000_set_reg(struct tm6000_core *dev, u8 req, u16 value, u16 index)
+{
+	return
+		tm6000_read_write_usb(dev, USB_DIR_OUT | USB_TYPE_VENDOR,
+				      req, value, index, NULL, 0);
+}
+EXPORT_SYMBOL_GPL(tm6000_set_reg);
+
+int tm6000_get_reg(struct tm6000_core *dev, u8 req, u16 value, u16 index)
+{
+	int rc;
+	u8 buf[1];
+
+	rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR, req,
+					value, index, buf, 1);
+
+	if (rc < 0)
+		return rc;
+
+	return *buf;
+}
+EXPORT_SYMBOL_GPL(tm6000_get_reg);
+
+int tm6000_set_reg_mask(struct tm6000_core *dev, u8 req, u16 value,
+						u16 index, u16 mask)
+{
+	int rc;
+	u8 buf[1];
+	u8 new_index;
+
+	rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR, req,
+					value, 0, buf, 1);
+
+	if (rc < 0)
+		return rc;
+
+	new_index = (buf[0] & ~mask) | (index & mask);
+
+	if (new_index == buf[0])
+		return 0;
+
+	return tm6000_read_write_usb(dev, USB_DIR_OUT | USB_TYPE_VENDOR,
+				      req, value, new_index, NULL, 0);
+}
+EXPORT_SYMBOL_GPL(tm6000_set_reg_mask);
+
+int tm6000_get_reg16(struct tm6000_core *dev, u8 req, u16 value, u16 index)
+{
+	int rc;
+	u8 buf[2];
+
+	rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR, req,
+					value, index, buf, 2);
+
+	if (rc < 0)
+		return rc;
+
+	return buf[1]|buf[0]<<8;
+}
+
+int tm6000_get_reg32(struct tm6000_core *dev, u8 req, u16 value, u16 index)
+{
+	int rc;
+	u8 buf[4];
+
+	rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR, req,
+					value, index, buf, 4);
+
+	if (rc < 0)
+		return rc;
+
+	return buf[3] | buf[2] << 8 | buf[1] << 16 | buf[0] << 24;
+}
+
+int tm6000_i2c_reset(struct tm6000_core *dev, u16 tsleep)
+{
+	int rc;
+
+	rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6000_GPIO_CLK, 0);
+	if (rc < 0)
+		return rc;
+
+	msleep(tsleep);
+
+	rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6000_GPIO_CLK, 1);
+	msleep(tsleep);
+
+	return rc;
+}
+
+void tm6000_set_fourcc_format(struct tm6000_core *dev)
+{
+	if (dev->dev_type == TM6010) {
+		int val;
+
+		val = tm6000_get_reg(dev, TM6010_REQ07_RCC_ACTIVE_IF, 0) & 0xfc;
+		if (dev->fourcc == V4L2_PIX_FMT_UYVY)
+			tm6000_set_reg(dev, TM6010_REQ07_RCC_ACTIVE_IF, val);
+		else
+			tm6000_set_reg(dev, TM6010_REQ07_RCC_ACTIVE_IF, val | 1);
+	} else {
+		if (dev->fourcc == V4L2_PIX_FMT_UYVY)
+			tm6000_set_reg(dev, TM6010_REQ07_RC1_TRESHOLD, 0xd0);
+		else
+			tm6000_set_reg(dev, TM6010_REQ07_RC1_TRESHOLD, 0x90);
+	}
+}
+
+static void tm6000_set_vbi(struct tm6000_core *dev)
+{
+	/*
+	 * FIXME:
+	 * VBI lines and start/end are different between 60Hz and 50Hz
+	 * So, it is very likely that we need to change the config to
+	 * something that takes it into account, doing something different
+	 * if (dev->norm & V4L2_STD_525_60)
+	 */
+
+	if (dev->dev_type == TM6010) {
+		tm6000_set_reg(dev, TM6010_REQ07_R3F_RESET, 0x01);
+		tm6000_set_reg(dev, TM6010_REQ07_R41_TELETEXT_VBI_CODE1, 0x27);
+		tm6000_set_reg(dev, TM6010_REQ07_R42_VBI_DATA_HIGH_LEVEL, 0x55);
+		tm6000_set_reg(dev, TM6010_REQ07_R43_VBI_DATA_TYPE_LINE7, 0x66);
+		tm6000_set_reg(dev, TM6010_REQ07_R44_VBI_DATA_TYPE_LINE8, 0x66);
+		tm6000_set_reg(dev, TM6010_REQ07_R45_VBI_DATA_TYPE_LINE9, 0x66);
+		tm6000_set_reg(dev,
+			TM6010_REQ07_R46_VBI_DATA_TYPE_LINE10, 0x66);
+		tm6000_set_reg(dev,
+			TM6010_REQ07_R47_VBI_DATA_TYPE_LINE11, 0x66);
+		tm6000_set_reg(dev,
+			TM6010_REQ07_R48_VBI_DATA_TYPE_LINE12, 0x66);
+		tm6000_set_reg(dev,
+			TM6010_REQ07_R49_VBI_DATA_TYPE_LINE13, 0x66);
+		tm6000_set_reg(dev,
+			TM6010_REQ07_R4A_VBI_DATA_TYPE_LINE14, 0x66);
+		tm6000_set_reg(dev,
+			TM6010_REQ07_R4B_VBI_DATA_TYPE_LINE15, 0x66);
+		tm6000_set_reg(dev,
+			TM6010_REQ07_R4C_VBI_DATA_TYPE_LINE16, 0x66);
+		tm6000_set_reg(dev,
+			TM6010_REQ07_R4D_VBI_DATA_TYPE_LINE17, 0x66);
+		tm6000_set_reg(dev,
+			TM6010_REQ07_R4E_VBI_DATA_TYPE_LINE18, 0x66);
+		tm6000_set_reg(dev,
+			TM6010_REQ07_R4F_VBI_DATA_TYPE_LINE19, 0x66);
+		tm6000_set_reg(dev,
+			TM6010_REQ07_R50_VBI_DATA_TYPE_LINE20, 0x66);
+		tm6000_set_reg(dev,
+			TM6010_REQ07_R51_VBI_DATA_TYPE_LINE21, 0x66);
+		tm6000_set_reg(dev,
+			TM6010_REQ07_R52_VBI_DATA_TYPE_LINE22, 0x66);
+		tm6000_set_reg(dev,
+			TM6010_REQ07_R53_VBI_DATA_TYPE_LINE23, 0x00);
+		tm6000_set_reg(dev,
+			TM6010_REQ07_R54_VBI_DATA_TYPE_RLINES, 0x00);
+		tm6000_set_reg(dev,
+			TM6010_REQ07_R55_VBI_LOOP_FILTER_GAIN, 0x01);
+		tm6000_set_reg(dev,
+			TM6010_REQ07_R56_VBI_LOOP_FILTER_I_GAIN, 0x00);
+		tm6000_set_reg(dev,
+			TM6010_REQ07_R57_VBI_LOOP_FILTER_P_GAIN, 0x02);
+		tm6000_set_reg(dev, TM6010_REQ07_R58_VBI_CAPTION_DTO1, 0x35);
+		tm6000_set_reg(dev, TM6010_REQ07_R59_VBI_CAPTION_DTO0, 0xa0);
+		tm6000_set_reg(dev, TM6010_REQ07_R5A_VBI_TELETEXT_DTO1, 0x11);
+		tm6000_set_reg(dev, TM6010_REQ07_R5B_VBI_TELETEXT_DTO0, 0x4c);
+		tm6000_set_reg(dev, TM6010_REQ07_R40_TELETEXT_VBI_CODE0, 0x01);
+		tm6000_set_reg(dev, TM6010_REQ07_R3F_RESET, 0x00);
+	}
+}
+
+int tm6000_init_analog_mode(struct tm6000_core *dev)
+{
+	struct v4l2_frequency f;
+
+	if (dev->dev_type == TM6010) {
+		u8 active = TM6010_REQ07_RCC_ACTIVE_IF_AUDIO_ENABLE;
+
+		if (!dev->radio)
+			active |= TM6010_REQ07_RCC_ACTIVE_IF_VIDEO_ENABLE;
+
+		/* Enable video and audio */
+		tm6000_set_reg_mask(dev, TM6010_REQ07_RCC_ACTIVE_IF,
+							active, 0x60);
+		/* Disable TS input */
+		tm6000_set_reg_mask(dev, TM6010_REQ07_RC0_ACTIVE_VIDEO_SOURCE,
+							0x00, 0x40);
+	} else {
+		/* Enables soft reset */
+		tm6000_set_reg(dev, TM6010_REQ07_R3F_RESET, 0x01);
+
+		if (dev->scaler)
+			/* Disable Hfilter and Enable TS Drop err */
+			tm6000_set_reg(dev, TM6010_REQ07_RC0_ACTIVE_VIDEO_SOURCE, 0x20);
+		else	/* Enable Hfilter and disable TS Drop err */
+			tm6000_set_reg(dev, TM6010_REQ07_RC0_ACTIVE_VIDEO_SOURCE, 0x80);
+
+		tm6000_set_reg(dev, TM6010_REQ07_RC3_HSTART1, 0x88);
+		tm6000_set_reg(dev, TM6000_REQ07_RDA_CLK_SEL, 0x23);
+		tm6000_set_reg(dev, TM6010_REQ07_RD1_ADDR_FOR_REQ1, 0xc0);
+		tm6000_set_reg(dev, TM6010_REQ07_RD2_ADDR_FOR_REQ2, 0xd8);
+		tm6000_set_reg(dev, TM6010_REQ07_RD6_ENDP_REQ1_REQ2, 0x06);
+		tm6000_set_reg(dev, TM6000_REQ07_RDF_PWDOWN_ACLK, 0x1f);
+
+		/* AP Software reset */
+		tm6000_set_reg(dev, TM6010_REQ07_RFF_SOFT_RESET, 0x08);
+		tm6000_set_reg(dev, TM6010_REQ07_RFF_SOFT_RESET, 0x00);
+
+		tm6000_set_fourcc_format(dev);
+
+		/* Disables soft reset */
+		tm6000_set_reg(dev, TM6010_REQ07_R3F_RESET, 0x00);
+	}
+	msleep(20);
+
+	/* Tuner firmware can now be loaded */
+
+	/*
+	 * FIXME: This is a hack! xc3028 "sleeps" when no channel is detected
+	 * for more than a few seconds. Not sure why, as this behavior does
+	 * not happen on other devices with xc3028. So, I suspect that it
+	 * is yet another bug at tm6000. After start sleeping, decoding
+	 * doesn't start automatically. Instead, it requires some
+	 * I2C commands to wake it up. As we want to have image at the
+	 * beginning, we needed to add this hack. The better would be to
+	 * discover some way to make tm6000 to wake up without this hack.
+	 */
+	f.frequency = dev->freq;
+	v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, &f);
+
+	msleep(100);
+	tm6000_set_standard(dev);
+	tm6000_set_vbi(dev);
+	tm6000_set_audio_bitrate(dev, 48000);
+
+	/* switch dvb led off */
+	if (dev->gpio.dvb_led) {
+		tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+			dev->gpio.dvb_led, 0x01);
+	}
+
+	return 0;
+}
+
+int tm6000_init_digital_mode(struct tm6000_core *dev)
+{
+	if (dev->dev_type == TM6010) {
+		/* Disable video and audio */
+		tm6000_set_reg_mask(dev, TM6010_REQ07_RCC_ACTIVE_IF,
+				0x00, 0x60);
+		/* Enable TS input */
+		tm6000_set_reg_mask(dev, TM6010_REQ07_RC0_ACTIVE_VIDEO_SOURCE,
+				0x40, 0x40);
+		/* all power down, but not the digital data port */
+		tm6000_set_reg(dev, TM6010_REQ07_RFE_POWER_DOWN, 0x28);
+		tm6000_set_reg(dev, TM6010_REQ08_RE2_POWER_DOWN_CTRL1, 0xfc);
+		tm6000_set_reg(dev, TM6010_REQ08_RE6_POWER_DOWN_CTRL2, 0xff);
+	} else  {
+		tm6000_set_reg(dev, TM6010_REQ07_RFF_SOFT_RESET, 0x08);
+		tm6000_set_reg(dev, TM6010_REQ07_RFF_SOFT_RESET, 0x00);
+		tm6000_set_reg(dev, TM6010_REQ07_R3F_RESET, 0x01);
+		tm6000_set_reg(dev, TM6000_REQ07_RDF_PWDOWN_ACLK, 0x08);
+		tm6000_set_reg(dev, TM6000_REQ07_RE2_VADC_STATUS_CTL, 0x0c);
+		tm6000_set_reg(dev, TM6000_REQ07_RE8_VADC_PWDOWN_CTL, 0xff);
+		tm6000_set_reg(dev, TM6000_REQ07_REB_VADC_AADC_MODE, 0xd8);
+		tm6000_set_reg(dev, TM6010_REQ07_RC0_ACTIVE_VIDEO_SOURCE, 0x40);
+		tm6000_set_reg(dev, TM6010_REQ07_RC1_TRESHOLD, 0xd0);
+		tm6000_set_reg(dev, TM6010_REQ07_RC3_HSTART1, 0x09);
+		tm6000_set_reg(dev, TM6000_REQ07_RDA_CLK_SEL, 0x37);
+		tm6000_set_reg(dev, TM6010_REQ07_RD1_ADDR_FOR_REQ1, 0xd8);
+		tm6000_set_reg(dev, TM6010_REQ07_RD2_ADDR_FOR_REQ2, 0xc0);
+		tm6000_set_reg(dev, TM6010_REQ07_RD6_ENDP_REQ1_REQ2, 0x60);
+
+		tm6000_set_reg(dev, TM6000_REQ07_RE2_VADC_STATUS_CTL, 0x0c);
+		tm6000_set_reg(dev, TM6000_REQ07_RE8_VADC_PWDOWN_CTL, 0xff);
+		tm6000_set_reg(dev, TM6000_REQ07_REB_VADC_AADC_MODE, 0x08);
+		msleep(50);
+
+		tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 0x0020, 0x00);
+		msleep(50);
+		tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 0x0020, 0x01);
+		msleep(50);
+		tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 0x0020, 0x00);
+		msleep(100);
+	}
+
+	/* switch dvb led on */
+	if (dev->gpio.dvb_led) {
+		tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+			dev->gpio.dvb_led, 0x00);
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(tm6000_init_digital_mode);
+
+struct reg_init {
+	u8 req;
+	u8 reg;
+	u8 val;
+};
+
+/* The meaning of those initializations are unknown */
+static struct reg_init tm6000_init_tab[] = {
+	/* REG  VALUE */
+	{ TM6000_REQ07_RDF_PWDOWN_ACLK, 0x1f },
+	{ TM6010_REQ07_RFF_SOFT_RESET, 0x08 },
+	{ TM6010_REQ07_RFF_SOFT_RESET, 0x00 },
+	{ TM6010_REQ07_RD5_POWERSAVE, 0x4f },
+	{ TM6000_REQ07_RDA_CLK_SEL, 0x23 },
+	{ TM6000_REQ07_RDB_OUT_SEL, 0x08 },
+	{ TM6000_REQ07_RE2_VADC_STATUS_CTL, 0x00 },
+	{ TM6000_REQ07_RE3_VADC_INP_LPF_SEL1, 0x10 },
+	{ TM6000_REQ07_RE5_VADC_INP_LPF_SEL2, 0x00 },
+	{ TM6000_REQ07_RE8_VADC_PWDOWN_CTL, 0x00 },
+	{ TM6000_REQ07_REB_VADC_AADC_MODE, 0x64 },	/* 48000 bits/sample, external input */
+	{ TM6000_REQ07_REE_VADC_CTRL_SEL_CONTROL, 0xc2 },
+
+	{ TM6010_REQ07_R3F_RESET, 0x01 },		/* Start of soft reset */
+	{ TM6010_REQ07_R00_VIDEO_CONTROL0, 0x00 },
+	{ TM6010_REQ07_R01_VIDEO_CONTROL1, 0x07 },
+	{ TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f },
+	{ TM6010_REQ07_R03_YC_SEP_CONTROL, 0x00 },
+	{ TM6010_REQ07_R05_NOISE_THRESHOLD, 0x64 },
+	{ TM6010_REQ07_R07_OUTPUT_CONTROL, 0x01 },
+	{ TM6010_REQ07_R08_LUMA_CONTRAST_ADJ, 0x82 },
+	{ TM6010_REQ07_R09_LUMA_BRIGHTNESS_ADJ, 0x36 },
+	{ TM6010_REQ07_R0A_CHROMA_SATURATION_ADJ, 0x50 },
+	{ TM6010_REQ07_R0C_CHROMA_AGC_CONTROL, 0x6a },
+	{ TM6010_REQ07_R11_AGC_PEAK_CONTROL, 0xc9 },
+	{ TM6010_REQ07_R12_AGC_GATE_STARTH, 0x07 },
+	{ TM6010_REQ07_R13_AGC_GATE_STARTL, 0x3b },
+	{ TM6010_REQ07_R14_AGC_GATE_WIDTH, 0x47 },
+	{ TM6010_REQ07_R15_AGC_BP_DELAY, 0x6f },
+	{ TM6010_REQ07_R17_HLOOP_MAXSTATE, 0xcd },
+	{ TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x1e },
+	{ TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x8b },
+	{ TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0xa2 },
+	{ TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0xe9 },
+	{ TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c },
+	{ TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc },
+	{ TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc },
+	{ TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd },
+	{ TM6010_REQ07_R20_HSYNC_RISING_EDGE_TIME, 0x3c },
+	{ TM6010_REQ07_R21_HSYNC_PHASE_OFFSET, 0x3c },
+	{ TM6010_REQ07_R2D_CHROMA_BURST_END, 0x48 },
+	{ TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x88 },
+	{ TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x22 },
+	{ TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0x61 },
+	{ TM6010_REQ07_R32_VSYNC_HLOCK_MIN, 0x74 },
+	{ TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x1c },
+	{ TM6010_REQ07_R34_VSYNC_AGC_MIN, 0x74 },
+	{ TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x1c },
+	{ TM6010_REQ07_R36_VSYNC_VBI_MIN, 0x7a },
+	{ TM6010_REQ07_R37_VSYNC_VBI_MAX, 0x26 },
+	{ TM6010_REQ07_R38_VSYNC_THRESHOLD, 0x40 },
+	{ TM6010_REQ07_R39_VSYNC_TIME_CONSTANT, 0x0a },
+	{ TM6010_REQ07_R42_VBI_DATA_HIGH_LEVEL, 0x55 },
+	{ TM6010_REQ07_R51_VBI_DATA_TYPE_LINE21, 0x11 },
+	{ TM6010_REQ07_R55_VBI_LOOP_FILTER_GAIN, 0x01 },
+	{ TM6010_REQ07_R57_VBI_LOOP_FILTER_P_GAIN, 0x02 },
+	{ TM6010_REQ07_R58_VBI_CAPTION_DTO1, 0x35 },
+	{ TM6010_REQ07_R59_VBI_CAPTION_DTO0, 0xa0 },
+	{ TM6010_REQ07_R80_COMB_FILTER_TRESHOLD, 0x15 },
+	{ TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x42 },
+	{ TM6010_REQ07_RC1_TRESHOLD, 0xd0 },
+	{ TM6010_REQ07_RC3_HSTART1, 0x88 },
+	{ TM6010_REQ07_R3F_RESET, 0x00 },		/* End of the soft reset */
+	{ TM6010_REQ05_R18_IMASK7, 0x00 },
+};
+
+static struct reg_init tm6010_init_tab[] = {
+	{ TM6010_REQ07_RC0_ACTIVE_VIDEO_SOURCE, 0x00 },
+	{ TM6010_REQ07_RC4_HSTART0, 0xa0 },
+	{ TM6010_REQ07_RC6_HEND0, 0x40 },
+	{ TM6010_REQ07_RCA_VEND0, 0x31 },
+	{ TM6010_REQ07_RCC_ACTIVE_IF, 0xe1 },
+	{ TM6010_REQ07_RE0_DVIDEO_SOURCE, 0x03 },
+	{ TM6010_REQ07_RFE_POWER_DOWN, 0x7f },
+
+	{ TM6010_REQ08_RE2_POWER_DOWN_CTRL1, 0xf0 },
+	{ TM6010_REQ08_RE3_ADC_IN1_SEL, 0xf4 },
+	{ TM6010_REQ08_RE4_ADC_IN2_SEL, 0xf8 },
+	{ TM6010_REQ08_RE6_POWER_DOWN_CTRL2, 0x00 },
+	{ TM6010_REQ08_REA_BUFF_DRV_CTRL, 0xf2 },
+	{ TM6010_REQ08_REB_SIF_GAIN_CTRL, 0xf0 },
+	{ TM6010_REQ08_REC_REVERSE_YC_CTRL, 0xc2 },
+	{ TM6010_REQ08_RF0_DAUDIO_INPUT_CONFIG, 0x60 },
+	{ TM6010_REQ08_RF1_AADC_POWER_DOWN, 0xfc },
+
+	{ TM6010_REQ07_R3F_RESET, 0x01 },
+	{ TM6010_REQ07_R00_VIDEO_CONTROL0, 0x00 },
+	{ TM6010_REQ07_R01_VIDEO_CONTROL1, 0x07 },
+	{ TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f },
+	{ TM6010_REQ07_R03_YC_SEP_CONTROL, 0x00 },
+	{ TM6010_REQ07_R05_NOISE_THRESHOLD, 0x64 },
+	{ TM6010_REQ07_R07_OUTPUT_CONTROL, 0x01 },
+	{ TM6010_REQ07_R08_LUMA_CONTRAST_ADJ, 0x82 },
+	{ TM6010_REQ07_R09_LUMA_BRIGHTNESS_ADJ, 0x36 },
+	{ TM6010_REQ07_R0A_CHROMA_SATURATION_ADJ, 0x50 },
+	{ TM6010_REQ07_R0C_CHROMA_AGC_CONTROL, 0x6a },
+	{ TM6010_REQ07_R11_AGC_PEAK_CONTROL, 0xc9 },
+	{ TM6010_REQ07_R12_AGC_GATE_STARTH, 0x07 },
+	{ TM6010_REQ07_R13_AGC_GATE_STARTL, 0x3b },
+	{ TM6010_REQ07_R14_AGC_GATE_WIDTH, 0x47 },
+	{ TM6010_REQ07_R15_AGC_BP_DELAY, 0x6f },
+	{ TM6010_REQ07_R17_HLOOP_MAXSTATE, 0xcd },
+	{ TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x1e },
+	{ TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x8b },
+	{ TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0xa2 },
+	{ TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0xe9 },
+	{ TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c },
+	{ TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc },
+	{ TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc },
+	{ TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd },
+	{ TM6010_REQ07_R20_HSYNC_RISING_EDGE_TIME, 0x3c },
+	{ TM6010_REQ07_R21_HSYNC_PHASE_OFFSET, 0x3c },
+	{ TM6010_REQ07_R2D_CHROMA_BURST_END, 0x48 },
+	{ TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x88 },
+	{ TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x22 },
+	{ TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0x61 },
+	{ TM6010_REQ07_R32_VSYNC_HLOCK_MIN, 0x74 },
+	{ TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x1c },
+	{ TM6010_REQ07_R34_VSYNC_AGC_MIN, 0x74 },
+	{ TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x1c },
+	{ TM6010_REQ07_R36_VSYNC_VBI_MIN, 0x7a },
+	{ TM6010_REQ07_R37_VSYNC_VBI_MAX, 0x26 },
+	{ TM6010_REQ07_R38_VSYNC_THRESHOLD, 0x40 },
+	{ TM6010_REQ07_R39_VSYNC_TIME_CONSTANT, 0x0a },
+	{ TM6010_REQ07_R42_VBI_DATA_HIGH_LEVEL, 0x55 },
+	{ TM6010_REQ07_R51_VBI_DATA_TYPE_LINE21, 0x11 },
+	{ TM6010_REQ07_R55_VBI_LOOP_FILTER_GAIN, 0x01 },
+	{ TM6010_REQ07_R57_VBI_LOOP_FILTER_P_GAIN, 0x02 },
+	{ TM6010_REQ07_R58_VBI_CAPTION_DTO1, 0x35 },
+	{ TM6010_REQ07_R59_VBI_CAPTION_DTO0, 0xa0 },
+	{ TM6010_REQ07_R80_COMB_FILTER_TRESHOLD, 0x15 },
+	{ TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x42 },
+	{ TM6010_REQ07_RC1_TRESHOLD, 0xd0 },
+	{ TM6010_REQ07_RC3_HSTART1, 0x88 },
+	{ TM6010_REQ07_R3F_RESET, 0x00 },
+
+	{ TM6010_REQ05_R18_IMASK7, 0x00 },
+
+	{ TM6010_REQ07_RDC_IR_LEADER1, 0xaa },
+	{ TM6010_REQ07_RDD_IR_LEADER0, 0x30 },
+	{ TM6010_REQ07_RDE_IR_PULSE_CNT1, 0x20 },
+	{ TM6010_REQ07_RDF_IR_PULSE_CNT0, 0xd0 },
+	{ REQ_04_EN_DISABLE_MCU_INT, 0x02, 0x00 },
+	{ TM6010_REQ07_RD8_IR, 0x0f },
+
+	/* set remote wakeup key:any key wakeup */
+	{ TM6010_REQ07_RE5_REMOTE_WAKEUP,  0xfe },
+	{ TM6010_REQ07_RDA_IR_WAKEUP_SEL,  0xff },
+};
+
+int tm6000_init(struct tm6000_core *dev)
+{
+	int board, rc = 0, i, size;
+	struct reg_init *tab;
+
+	/* Check board revision */
+	board = tm6000_get_reg32(dev, REQ_40_GET_VERSION, 0, 0);
+	if (board >= 0) {
+		switch (board & 0xff) {
+		case 0xf3:
+			printk(KERN_INFO "Found tm6000\n");
+			if (dev->dev_type != TM6000)
+				dev->dev_type = TM6000;
+			break;
+		case 0xf4:
+			printk(KERN_INFO "Found tm6010\n");
+			if (dev->dev_type != TM6010)
+				dev->dev_type = TM6010;
+			break;
+		default:
+			printk(KERN_INFO "Unknown board version = 0x%08x\n", board);
+		}
+	} else
+		printk(KERN_ERR "Error %i while retrieving board version\n", board);
+
+	if (dev->dev_type == TM6010) {
+		tab = tm6010_init_tab;
+		size = ARRAY_SIZE(tm6010_init_tab);
+	} else {
+		tab = tm6000_init_tab;
+		size = ARRAY_SIZE(tm6000_init_tab);
+	}
+
+	/* Load board's initialization table */
+	for (i = 0; i < size; i++) {
+		rc = tm6000_set_reg(dev, tab[i].req, tab[i].reg, tab[i].val);
+		if (rc < 0) {
+			printk(KERN_ERR "Error %i while setting req %d, "
+					"reg %d to value %d\n", rc,
+					tab[i].req, tab[i].reg, tab[i].val);
+			return rc;
+		}
+	}
+
+	msleep(5); /* Just to be conservative */
+
+	rc = tm6000_cards_setup(dev);
+
+	return rc;
+}
+
+
+int tm6000_set_audio_bitrate(struct tm6000_core *dev, int bitrate)
+{
+	int val = 0;
+	u8 areg_f0 = 0x60; /* ADC MCLK = 250 Fs */
+	u8 areg_0a = 0x91; /* SIF 48KHz */
+
+	switch (bitrate) {
+	case 48000:
+		areg_f0 = 0x60; /* ADC MCLK = 250 Fs */
+		areg_0a = 0x91; /* SIF 48KHz */
+		dev->audio_bitrate = bitrate;
+		break;
+	case 32000:
+		areg_f0 = 0x00; /* ADC MCLK = 375 Fs */
+		areg_0a = 0x90; /* SIF 32KHz */
+		dev->audio_bitrate = bitrate;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+
+	/* enable I2S, if we use sif or external I2S device */
+	if (dev->dev_type == TM6010) {
+		val = tm6000_set_reg(dev, TM6010_REQ08_R0A_A_I2S_MOD, areg_0a);
+		if (val < 0)
+			return val;
+
+		val = tm6000_set_reg_mask(dev, TM6010_REQ08_RF0_DAUDIO_INPUT_CONFIG,
+							areg_f0, 0xf0);
+		if (val < 0)
+			return val;
+	} else {
+		val = tm6000_set_reg_mask(dev, TM6000_REQ07_REB_VADC_AADC_MODE,
+							areg_f0, 0xf0);
+		if (val < 0)
+			return val;
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(tm6000_set_audio_bitrate);
+
+int tm6000_set_audio_rinput(struct tm6000_core *dev)
+{
+	if (dev->dev_type == TM6010) {
+		/* Audio crossbar setting, default SIF1 */
+		u8 areg_f0;
+		u8 areg_07 = 0x10;
+
+		switch (dev->rinput.amux) {
+		case TM6000_AMUX_SIF1:
+		case TM6000_AMUX_SIF2:
+			areg_f0 = 0x03;
+			areg_07 = 0x30;
+			break;
+		case TM6000_AMUX_ADC1:
+			areg_f0 = 0x00;
+			break;
+		case TM6000_AMUX_ADC2:
+			areg_f0 = 0x08;
+			break;
+		case TM6000_AMUX_I2S:
+			areg_f0 = 0x04;
+			break;
+		default:
+			printk(KERN_INFO "%s: audio input dosn't support\n",
+				dev->name);
+			return 0;
+			break;
+		}
+		/* Set audio input crossbar */
+		tm6000_set_reg_mask(dev, TM6010_REQ08_RF0_DAUDIO_INPUT_CONFIG,
+							areg_f0, 0x0f);
+		/* Mux overflow workaround */
+		tm6000_set_reg_mask(dev, TM6010_REQ07_R07_OUTPUT_CONTROL,
+			areg_07, 0xf0);
+	} else {
+		u8 areg_eb;
+		/* Audio setting, default LINE1 */
+		switch (dev->rinput.amux) {
+		case TM6000_AMUX_ADC1:
+			areg_eb = 0x00;
+			break;
+		case TM6000_AMUX_ADC2:
+			areg_eb = 0x04;
+			break;
+		default:
+			printk(KERN_INFO "%s: audio input dosn't support\n",
+				dev->name);
+			return 0;
+			break;
+		}
+		/* Set audio input */
+		tm6000_set_reg_mask(dev, TM6000_REQ07_REB_VADC_AADC_MODE,
+							areg_eb, 0x0f);
+	}
+	return 0;
+}
+
+static void tm6010_set_mute_sif(struct tm6000_core *dev, u8 mute)
+{
+	u8 mute_reg = 0;
+
+	if (mute)
+		mute_reg = 0x08;
+
+	tm6000_set_reg_mask(dev, TM6010_REQ08_R0A_A_I2S_MOD, mute_reg, 0x08);
+}
+
+static void tm6010_set_mute_adc(struct tm6000_core *dev, u8 mute)
+{
+	u8 mute_reg = 0;
+
+	if (mute)
+		mute_reg = 0x20;
+
+	if (dev->dev_type == TM6010) {
+		tm6000_set_reg_mask(dev, TM6010_REQ08_RF2_LEFT_CHANNEL_VOL,
+							mute_reg, 0x20);
+		tm6000_set_reg_mask(dev, TM6010_REQ08_RF3_RIGHT_CHANNEL_VOL,
+							mute_reg, 0x20);
+	} else {
+		tm6000_set_reg_mask(dev, TM6000_REQ07_REC_VADC_AADC_LVOL,
+							mute_reg, 0x20);
+		tm6000_set_reg_mask(dev, TM6000_REQ07_RED_VADC_AADC_RVOL,
+							mute_reg, 0x20);
+	}
+}
+
+int tm6000_tvaudio_set_mute(struct tm6000_core *dev, u8 mute)
+{
+	enum tm6000_mux mux;
+
+	if (dev->radio)
+		mux = dev->rinput.amux;
+	else
+		mux = dev->vinput[dev->input].amux;
+
+	switch (mux) {
+	case TM6000_AMUX_SIF1:
+	case TM6000_AMUX_SIF2:
+		if (dev->dev_type == TM6010)
+			tm6010_set_mute_sif(dev, mute);
+		else {
+			printk(KERN_INFO "ERROR: TM5600 and TM6000 don't has"
+					" SIF audio inputs. Please check the %s"
+					" configuration.\n", dev->name);
+			return -EINVAL;
+		}
+		break;
+	case TM6000_AMUX_ADC1:
+	case TM6000_AMUX_ADC2:
+		tm6010_set_mute_adc(dev, mute);
+		break;
+	default:
+		return -EINVAL;
+		break;
+	}
+	return 0;
+}
+
+static void tm6010_set_volume_sif(struct tm6000_core *dev, int vol)
+{
+	u8 vol_reg;
+
+	vol_reg = vol & 0x0F;
+
+	if (vol < 0)
+		vol_reg |= 0x40;
+
+	tm6000_set_reg(dev, TM6010_REQ08_R07_A_LEFT_VOL, vol_reg);
+	tm6000_set_reg(dev, TM6010_REQ08_R08_A_RIGHT_VOL, vol_reg);
+}
+
+static void tm6010_set_volume_adc(struct tm6000_core *dev, int vol)
+{
+	u8 vol_reg;
+
+	vol_reg = (vol + 0x10) & 0x1f;
+
+	if (dev->dev_type == TM6010) {
+		tm6000_set_reg(dev, TM6010_REQ08_RF2_LEFT_CHANNEL_VOL, vol_reg);
+		tm6000_set_reg(dev, TM6010_REQ08_RF3_RIGHT_CHANNEL_VOL, vol_reg);
+	} else {
+		tm6000_set_reg(dev, TM6000_REQ07_REC_VADC_AADC_LVOL, vol_reg);
+		tm6000_set_reg(dev, TM6000_REQ07_RED_VADC_AADC_RVOL, vol_reg);
+	}
+}
+
+void tm6000_set_volume(struct tm6000_core *dev, int vol)
+{
+	enum tm6000_mux mux;
+
+	if (dev->radio) {
+		mux = dev->rinput.amux;
+		vol += 8; /* Offset to 0 dB */
+	} else
+		mux = dev->vinput[dev->input].amux;
+
+	switch (mux) {
+	case TM6000_AMUX_SIF1:
+	case TM6000_AMUX_SIF2:
+		if (dev->dev_type == TM6010)
+			tm6010_set_volume_sif(dev, vol);
+		else
+			printk(KERN_INFO "ERROR: TM5600 and TM6000 don't has"
+					" SIF audio inputs. Please check the %s"
+					" configuration.\n", dev->name);
+		break;
+	case TM6000_AMUX_ADC1:
+	case TM6000_AMUX_ADC2:
+		tm6010_set_volume_adc(dev, vol);
+		break;
+	default:
+		break;
+	}
+}
+
+static LIST_HEAD(tm6000_devlist);
+static DEFINE_MUTEX(tm6000_devlist_mutex);
+
+/*
+ * tm6000_realease_resource()
+ */
+
+void tm6000_remove_from_devlist(struct tm6000_core *dev)
+{
+	mutex_lock(&tm6000_devlist_mutex);
+	list_del(&dev->devlist);
+	mutex_unlock(&tm6000_devlist_mutex);
+};
+
+void tm6000_add_into_devlist(struct tm6000_core *dev)
+{
+	mutex_lock(&tm6000_devlist_mutex);
+	list_add_tail(&dev->devlist, &tm6000_devlist);
+	mutex_unlock(&tm6000_devlist_mutex);
+};
+
+/*
+ * Extension interface
+ */
+
+static LIST_HEAD(tm6000_extension_devlist);
+
+int tm6000_call_fillbuf(struct tm6000_core *dev, enum tm6000_ops_type type,
+			char *buf, int size)
+{
+	struct tm6000_ops *ops = NULL;
+
+	/* FIXME: tm6000_extension_devlist_lock should be a spinlock */
+
+	if (!list_empty(&tm6000_extension_devlist)) {
+		list_for_each_entry(ops, &tm6000_extension_devlist, next) {
+			if (ops->fillbuf && ops->type == type)
+				ops->fillbuf(dev, buf, size);
+		}
+	}
+
+	return 0;
+}
+
+int tm6000_register_extension(struct tm6000_ops *ops)
+{
+	struct tm6000_core *dev = NULL;
+
+	mutex_lock(&tm6000_devlist_mutex);
+	list_add_tail(&ops->next, &tm6000_extension_devlist);
+	list_for_each_entry(dev, &tm6000_devlist, devlist) {
+		ops->init(dev);
+		printk(KERN_INFO "%s: Initialized (%s) extension\n",
+		       dev->name, ops->name);
+	}
+	mutex_unlock(&tm6000_devlist_mutex);
+	return 0;
+}
+EXPORT_SYMBOL(tm6000_register_extension);
+
+void tm6000_unregister_extension(struct tm6000_ops *ops)
+{
+	struct tm6000_core *dev = NULL;
+
+	mutex_lock(&tm6000_devlist_mutex);
+	list_for_each_entry(dev, &tm6000_devlist, devlist)
+		ops->fini(dev);
+
+	printk(KERN_INFO "tm6000: Remove (%s) extension\n", ops->name);
+	list_del(&ops->next);
+	mutex_unlock(&tm6000_devlist_mutex);
+}
+EXPORT_SYMBOL(tm6000_unregister_extension);
+
+void tm6000_init_extension(struct tm6000_core *dev)
+{
+	struct tm6000_ops *ops = NULL;
+
+	mutex_lock(&tm6000_devlist_mutex);
+	if (!list_empty(&tm6000_extension_devlist)) {
+		list_for_each_entry(ops, &tm6000_extension_devlist, next) {
+			if (ops->init)
+				ops->init(dev);
+		}
+	}
+	mutex_unlock(&tm6000_devlist_mutex);
+}
+
+void tm6000_close_extension(struct tm6000_core *dev)
+{
+	struct tm6000_ops *ops = NULL;
+
+	mutex_lock(&tm6000_devlist_mutex);
+	if (!list_empty(&tm6000_extension_devlist)) {
+		list_for_each_entry(ops, &tm6000_extension_devlist, next) {
+			if (ops->fini)
+				ops->fini(dev);
+		}
+	}
+	mutex_unlock(&tm6000_devlist_mutex);
+}
diff --git a/kernel/drivers/media/usb/tm6000/tm6000-dvb.c b/kernel/drivers/media/usb/tm6000/tm6000-dvb.c
new file mode 100644
index 000000000..095f5db1a
--- /dev/null
+++ b/kernel/drivers/media/usb/tm6000/tm6000-dvb.c
@@ -0,0 +1,467 @@
+/*
+ *  tm6000-dvb.c - dvb-t support for TM5600/TM6000/TM6010 USB video capture devices
+ *
+ *  Copyright (C) 2007 Michel Ludwig <michel.ludwig@gmail.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation version 2
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+
+#include "tm6000.h"
+#include "tm6000-regs.h"
+
+#include "zl10353.h"
+
+#include <media/tuner.h>
+
+#include "tuner-xc2028.h"
+#include "xc5000.h"
+
+MODULE_DESCRIPTION("DVB driver extension module for tm5600/6000/6010 based TV cards");
+MODULE_AUTHOR("Mauro Carvalho Chehab");
+MODULE_LICENSE("GPL");
+
+MODULE_SUPPORTED_DEVICE("{{Trident, tm5600},"
+			"{{Trident, tm6000},"
+			"{{Trident, tm6010}");
+
+static int debug;
+
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "enable debug message");
+
+static inline void print_err_status(struct tm6000_core *dev,
+				    int packet, int status)
+{
+	char *errmsg = "Unknown";
+
+	switch (status) {
+	case -ENOENT:
+		errmsg = "unlinked synchronuously";
+		break;
+	case -ECONNRESET:
+		errmsg = "unlinked asynchronuously";
+		break;
+	case -ENOSR:
+		errmsg = "Buffer error (overrun)";
+		break;
+	case -EPIPE:
+		errmsg = "Stalled (device not responding)";
+		break;
+	case -EOVERFLOW:
+		errmsg = "Babble (bad cable?)";
+		break;
+	case -EPROTO:
+		errmsg = "Bit-stuff error (bad cable?)";
+		break;
+	case -EILSEQ:
+		errmsg = "CRC/Timeout (could be anything)";
+		break;
+	case -ETIME:
+		errmsg = "Device does not respond";
+		break;
+	}
+	if (packet < 0) {
+		dprintk(dev, 1, "URB status %d [%s].\n",
+			status, errmsg);
+	} else {
+		dprintk(dev, 1, "URB packet %d, status %d [%s].\n",
+			packet, status, errmsg);
+	}
+}
+
+static void tm6000_urb_received(struct urb *urb)
+{
+	int ret;
+	struct tm6000_core *dev = urb->context;
+
+	switch (urb->status) {
+	case 0:
+	case -ETIMEDOUT:
+		break;
+	case -ENOENT:
+	case -ECONNRESET:
+	case -ESHUTDOWN:
+		return;
+	default:
+		print_err_status(dev, 0, urb->status);
+	}
+
+	if (urb->actual_length > 0)
+		dvb_dmx_swfilter(&dev->dvb->demux, urb->transfer_buffer,
+						   urb->actual_length);
+
+	if (dev->dvb->streams > 0) {
+		ret = usb_submit_urb(urb, GFP_ATOMIC);
+		if (ret < 0) {
+			printk(KERN_ERR "tm6000:  error %s\n", __func__);
+			kfree(urb->transfer_buffer);
+			usb_free_urb(urb);
+		}
+	}
+}
+
+static int tm6000_start_stream(struct tm6000_core *dev)
+{
+	int ret;
+	unsigned int pipe, size;
+	struct tm6000_dvb *dvb = dev->dvb;
+
+	printk(KERN_INFO "tm6000: got start stream request %s\n", __func__);
+
+	if (dev->mode != TM6000_MODE_DIGITAL) {
+		tm6000_init_digital_mode(dev);
+		dev->mode = TM6000_MODE_DIGITAL;
+	}
+
+	dvb->bulk_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (dvb->bulk_urb == NULL) {
+		printk(KERN_ERR "tm6000: couldn't allocate urb\n");
+		return -ENOMEM;
+	}
+
+	pipe = usb_rcvbulkpipe(dev->udev, dev->bulk_in.endp->desc.bEndpointAddress
+							  & USB_ENDPOINT_NUMBER_MASK);
+
+	size = usb_maxpacket(dev->udev, pipe, usb_pipeout(pipe));
+	size = size * 15; /* 512 x 8 or 12 or 15 */
+
+	dvb->bulk_urb->transfer_buffer = kzalloc(size, GFP_KERNEL);
+	if (dvb->bulk_urb->transfer_buffer == NULL) {
+		usb_free_urb(dvb->bulk_urb);
+		printk(KERN_ERR "tm6000: couldn't allocate transfer buffer!\n");
+		return -ENOMEM;
+	}
+
+	usb_fill_bulk_urb(dvb->bulk_urb, dev->udev, pipe,
+						 dvb->bulk_urb->transfer_buffer,
+						 size,
+						 tm6000_urb_received, dev);
+
+	ret = usb_clear_halt(dev->udev, pipe);
+	if (ret < 0) {
+		printk(KERN_ERR "tm6000: error %i in %s during pipe reset\n",
+							ret, __func__);
+		return ret;
+	} else
+		printk(KERN_ERR "tm6000: pipe resetted\n");
+
+/*	mutex_lock(&tm6000_driver.open_close_mutex); */
+	ret = usb_submit_urb(dvb->bulk_urb, GFP_ATOMIC);
+
+/*	mutex_unlock(&tm6000_driver.open_close_mutex); */
+	if (ret) {
+		printk(KERN_ERR "tm6000: submit of urb failed (error=%i)\n",
+									ret);
+
+		kfree(dvb->bulk_urb->transfer_buffer);
+		usb_free_urb(dvb->bulk_urb);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void tm6000_stop_stream(struct tm6000_core *dev)
+{
+	struct tm6000_dvb *dvb = dev->dvb;
+
+	if (dvb->bulk_urb) {
+		printk(KERN_INFO "urb killing\n");
+		usb_kill_urb(dvb->bulk_urb);
+		printk(KERN_INFO "urb buffer free\n");
+		kfree(dvb->bulk_urb->transfer_buffer);
+		usb_free_urb(dvb->bulk_urb);
+		dvb->bulk_urb = NULL;
+	}
+}
+
+static int tm6000_start_feed(struct dvb_demux_feed *feed)
+{
+	struct dvb_demux *demux = feed->demux;
+	struct tm6000_core *dev = demux->priv;
+	struct tm6000_dvb *dvb = dev->dvb;
+	printk(KERN_INFO "tm6000: got start feed request %s\n", __func__);
+
+	mutex_lock(&dvb->mutex);
+	if (dvb->streams == 0) {
+		dvb->streams = 1;
+/*		mutex_init(&tm6000_dev->streming_mutex); */
+		tm6000_start_stream(dev);
+	} else
+		++(dvb->streams);
+	mutex_unlock(&dvb->mutex);
+
+	return 0;
+}
+
+static int tm6000_stop_feed(struct dvb_demux_feed *feed)
+{
+	struct dvb_demux *demux = feed->demux;
+	struct tm6000_core *dev = demux->priv;
+	struct tm6000_dvb *dvb = dev->dvb;
+
+	printk(KERN_INFO "tm6000: got stop feed request %s\n", __func__);
+
+	mutex_lock(&dvb->mutex);
+
+	printk(KERN_INFO "stream %#x\n", dvb->streams);
+	--(dvb->streams);
+	if (dvb->streams == 0) {
+		printk(KERN_INFO "stop stream\n");
+		tm6000_stop_stream(dev);
+/*		mutex_destroy(&tm6000_dev->streaming_mutex); */
+	}
+	mutex_unlock(&dvb->mutex);
+/*	mutex_destroy(&tm6000_dev->streaming_mutex); */
+
+	return 0;
+}
+
+static int tm6000_dvb_attach_frontend(struct tm6000_core *dev)
+{
+	struct tm6000_dvb *dvb = dev->dvb;
+
+	if (dev->caps.has_zl10353) {
+		struct zl10353_config config = {
+				     .demod_address = dev->demod_addr,
+				     .no_tuner = 1,
+				     .parallel_ts = 1,
+				     .if2 = 45700,
+				     .disable_i2c_gate_ctrl = 1,
+				    };
+
+		dvb->frontend = dvb_attach(zl10353_attach, &config,
+							   &dev->i2c_adap);
+	} else {
+		printk(KERN_ERR "tm6000: no frontend defined for the device!\n");
+		return -1;
+	}
+
+	return (!dvb->frontend) ? -1 : 0;
+}
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+static int register_dvb(struct tm6000_core *dev)
+{
+	int ret = -1;
+	struct tm6000_dvb *dvb = dev->dvb;
+
+	mutex_init(&dvb->mutex);
+
+	dvb->streams = 0;
+
+	/* attach the frontend */
+	ret = tm6000_dvb_attach_frontend(dev);
+	if (ret < 0) {
+		printk(KERN_ERR "tm6000: couldn't attach the frontend!\n");
+		goto err;
+	}
+
+	ret = dvb_register_adapter(&dvb->adapter, "Trident TVMaster 6000 DVB-T",
+					THIS_MODULE, &dev->udev->dev, adapter_nr);
+	dvb->adapter.priv = dev;
+
+	if (dvb->frontend) {
+		switch (dev->tuner_type) {
+		case TUNER_XC2028: {
+			struct xc2028_config cfg = {
+				.i2c_adap = &dev->i2c_adap,
+				.i2c_addr = dev->tuner_addr,
+			};
+
+			dvb->frontend->callback = tm6000_tuner_callback;
+			ret = dvb_register_frontend(&dvb->adapter, dvb->frontend);
+			if (ret < 0) {
+				printk(KERN_ERR
+					"tm6000: couldn't register frontend\n");
+				goto adapter_err;
+			}
+
+			if (!dvb_attach(xc2028_attach, dvb->frontend, &cfg)) {
+				printk(KERN_ERR "tm6000: couldn't register "
+						"frontend (xc3028)\n");
+				ret = -EINVAL;
+				goto frontend_err;
+			}
+			printk(KERN_INFO "tm6000: XC2028/3028 asked to be "
+					 "attached to frontend!\n");
+			break;
+			}
+		case TUNER_XC5000: {
+			struct xc5000_config cfg = {
+				.i2c_address = dev->tuner_addr,
+			};
+
+			dvb->frontend->callback = tm6000_xc5000_callback;
+			ret = dvb_register_frontend(&dvb->adapter, dvb->frontend);
+			if (ret < 0) {
+				printk(KERN_ERR
+					"tm6000: couldn't register frontend\n");
+				goto adapter_err;
+			}
+
+			if (!dvb_attach(xc5000_attach, dvb->frontend, &dev->i2c_adap, &cfg)) {
+				printk(KERN_ERR "tm6000: couldn't register "
+						"frontend (xc5000)\n");
+				ret = -EINVAL;
+				goto frontend_err;
+			}
+			printk(KERN_INFO "tm6000: XC5000 asked to be "
+					 "attached to frontend!\n");
+			break;
+			}
+		}
+	} else
+		printk(KERN_ERR "tm6000: no frontend found\n");
+
+	dvb->demux.dmx.capabilities = DMX_TS_FILTERING | DMX_SECTION_FILTERING
+							    | DMX_MEMORY_BASED_FILTERING;
+	dvb->demux.priv = dev;
+	dvb->demux.filternum = 8;
+	dvb->demux.feednum = 8;
+	dvb->demux.start_feed = tm6000_start_feed;
+	dvb->demux.stop_feed = tm6000_stop_feed;
+	dvb->demux.write_to_decoder = NULL;
+	ret = dvb_dmx_init(&dvb->demux);
+	if (ret < 0) {
+		printk(KERN_ERR "tm6000: dvb_dmx_init failed (errno = %d)\n", ret);
+		goto frontend_err;
+	}
+
+	dvb->dmxdev.filternum = dev->dvb->demux.filternum;
+	dvb->dmxdev.demux = &dev->dvb->demux.dmx;
+	dvb->dmxdev.capabilities = 0;
+
+	ret =  dvb_dmxdev_init(&dvb->dmxdev, &dvb->adapter);
+	if (ret < 0) {
+		printk(KERN_ERR "tm6000: dvb_dmxdev_init failed (errno = %d)\n", ret);
+		goto dvb_dmx_err;
+	}
+
+	return 0;
+
+dvb_dmx_err:
+	dvb_dmx_release(&dvb->demux);
+frontend_err:
+	if (dvb->frontend) {
+		dvb_unregister_frontend(dvb->frontend);
+		dvb_frontend_detach(dvb->frontend);
+	}
+adapter_err:
+	dvb_unregister_adapter(&dvb->adapter);
+err:
+	return ret;
+}
+
+static void unregister_dvb(struct tm6000_core *dev)
+{
+	struct tm6000_dvb *dvb = dev->dvb;
+
+	if (dvb->bulk_urb != NULL) {
+		struct urb *bulk_urb = dvb->bulk_urb;
+
+		kfree(bulk_urb->transfer_buffer);
+		bulk_urb->transfer_buffer = NULL;
+		usb_unlink_urb(bulk_urb);
+		usb_free_urb(bulk_urb);
+	}
+
+/*	mutex_lock(&tm6000_driver.open_close_mutex); */
+	if (dvb->frontend) {
+		dvb_unregister_frontend(dvb->frontend);
+		dvb_frontend_detach(dvb->frontend);
+	}
+
+	dvb_dmxdev_release(&dvb->dmxdev);
+	dvb_dmx_release(&dvb->demux);
+	dvb_unregister_adapter(&dvb->adapter);
+	mutex_destroy(&dvb->mutex);
+/*	mutex_unlock(&tm6000_driver.open_close_mutex); */
+}
+
+static int dvb_init(struct tm6000_core *dev)
+{
+	struct tm6000_dvb *dvb;
+	int rc;
+
+	if (!dev)
+		return 0;
+
+	if (!dev->caps.has_dvb)
+		return 0;
+
+	if (dev->udev->speed == USB_SPEED_FULL) {
+		printk(KERN_INFO "This USB2.0 device cannot be run on a USB1.1 port. (it lacks a hardware PID filter)\n");
+		return 0;
+	}
+
+	dvb = kzalloc(sizeof(struct tm6000_dvb), GFP_KERNEL);
+	if (!dvb) {
+		printk(KERN_INFO "Cannot allocate memory\n");
+		return -ENOMEM;
+	}
+
+	dev->dvb = dvb;
+
+	rc = register_dvb(dev);
+	if (rc < 0) {
+		kfree(dvb);
+		dev->dvb = NULL;
+		return 0;
+	}
+
+	return 0;
+}
+
+static int dvb_fini(struct tm6000_core *dev)
+{
+	if (!dev)
+		return 0;
+
+	if (!dev->caps.has_dvb)
+		return 0;
+
+	if (dev->dvb) {
+		unregister_dvb(dev);
+		kfree(dev->dvb);
+		dev->dvb = NULL;
+	}
+
+	return 0;
+}
+
+static struct tm6000_ops dvb_ops = {
+	.type	= TM6000_DVB,
+	.name	= "TM6000 dvb Extension",
+	.init	= dvb_init,
+	.fini	= dvb_fini,
+};
+
+static int __init tm6000_dvb_register(void)
+{
+	return tm6000_register_extension(&dvb_ops);
+}
+
+static void __exit tm6000_dvb_unregister(void)
+{
+	tm6000_unregister_extension(&dvb_ops);
+}
+
+module_init(tm6000_dvb_register);
+module_exit(tm6000_dvb_unregister);
diff --git a/kernel/drivers/media/usb/tm6000/tm6000-i2c.c b/kernel/drivers/media/usb/tm6000/tm6000-i2c.c
new file mode 100644
index 000000000..c7e23e3dd
--- /dev/null
+++ b/kernel/drivers/media/usb/tm6000/tm6000-i2c.c
@@ -0,0 +1,334 @@
+/*
+ *  tm6000-i2c.c - driver for TM5600/TM6000/TM6010 USB video capture devices
+ *
+ *  Copyright (C) 2006-2007 Mauro Carvalho Chehab <mchehab@infradead.org>
+ *
+ *  Copyright (C) 2007 Michel Ludwig <michel.ludwig@gmail.com>
+ *	- Fix SMBus Read Byte command
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation version 2
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/usb.h>
+#include <linux/i2c.h>
+
+#include "tm6000.h"
+#include "tm6000-regs.h"
+#include <media/v4l2-common.h>
+#include <media/tuner.h>
+#include "tuner-xc2028.h"
+
+
+/* ----------------------------------------------------------- */
+
+static unsigned int i2c_debug;
+module_param(i2c_debug, int, 0644);
+MODULE_PARM_DESC(i2c_debug, "enable debug messages [i2c]");
+
+#define i2c_dprintk(lvl, fmt, args...) if (i2c_debug >= lvl) do { \
+			printk(KERN_DEBUG "%s at %s: " fmt, \
+			dev->name, __func__, ##args); } while (0)
+
+static int tm6000_i2c_send_regs(struct tm6000_core *dev, unsigned char addr,
+				__u8 reg, char *buf, int len)
+{
+	int rc;
+	unsigned int i2c_packet_limit = 16;
+
+	if (dev->dev_type == TM6010)
+		i2c_packet_limit = 80;
+
+	if (!buf)
+		return -1;
+
+	if (len < 1 || len > i2c_packet_limit) {
+		printk(KERN_ERR "Incorrect length of i2c packet = %d, limit set to %d\n",
+			len, i2c_packet_limit);
+		return -1;
+	}
+
+	/* capture mutex */
+	rc = tm6000_read_write_usb(dev, USB_DIR_OUT | USB_TYPE_VENDOR |
+		USB_RECIP_DEVICE, REQ_16_SET_GET_I2C_WR1_RDN,
+		addr | reg << 8, 0, buf, len);
+
+	if (rc < 0) {
+		/* release mutex */
+		return rc;
+	}
+
+	/* release mutex */
+	return rc;
+}
+
+/* Generic read - doesn't work fine with 16bit registers */
+static int tm6000_i2c_recv_regs(struct tm6000_core *dev, unsigned char addr,
+				__u8 reg, char *buf, int len)
+{
+	int rc;
+	u8 b[2];
+	unsigned int i2c_packet_limit = 16;
+
+	if (dev->dev_type == TM6010)
+		i2c_packet_limit = 64;
+
+	if (!buf)
+		return -1;
+
+	if (len < 1 || len > i2c_packet_limit) {
+		printk(KERN_ERR "Incorrect length of i2c packet = %d, limit set to %d\n",
+			len, i2c_packet_limit);
+		return -1;
+	}
+
+	/* capture mutex */
+	if ((dev->caps.has_zl10353) && (dev->demod_addr << 1 == addr) && (reg % 2 == 0)) {
+		/*
+		 * Workaround an I2C bug when reading from zl10353
+		 */
+		reg -= 1;
+		len += 1;
+
+		rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			REQ_16_SET_GET_I2C_WR1_RDN, addr | reg << 8, 0, b, len);
+
+		*buf = b[1];
+	} else {
+		rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			REQ_16_SET_GET_I2C_WR1_RDN, addr | reg << 8, 0, buf, len);
+	}
+
+	/* release mutex */
+	return rc;
+}
+
+/*
+ * read from a 16bit register
+ * for example xc2028, xc3028 or xc3028L
+ */
+static int tm6000_i2c_recv_regs16(struct tm6000_core *dev, unsigned char addr,
+				  __u16 reg, char *buf, int len)
+{
+	int rc;
+	unsigned char ureg;
+
+	if (!buf || len != 2)
+		return -1;
+
+	/* capture mutex */
+	if (dev->dev_type == TM6010) {
+		ureg = reg & 0xFF;
+		rc = tm6000_read_write_usb(dev, USB_DIR_OUT | USB_TYPE_VENDOR |
+			USB_RECIP_DEVICE, REQ_16_SET_GET_I2C_WR1_RDN,
+			addr | (reg & 0xFF00), 0, &ureg, 1);
+
+		if (rc < 0) {
+			/* release mutex */
+			return rc;
+		}
+
+		rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR |
+			USB_RECIP_DEVICE, REQ_35_AFTEK_TUNER_READ,
+			reg, 0, buf, len);
+	} else {
+		rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR |
+			USB_RECIP_DEVICE, REQ_14_SET_GET_I2C_WR2_RDN,
+			addr, reg, buf, len);
+	}
+
+	/* release mutex */
+	return rc;
+}
+
+static int tm6000_i2c_xfer(struct i2c_adapter *i2c_adap,
+			   struct i2c_msg msgs[], int num)
+{
+	struct tm6000_core *dev = i2c_adap->algo_data;
+	int addr, rc, i, byte;
+
+	if (num <= 0)
+		return 0;
+	for (i = 0; i < num; i++) {
+		addr = (msgs[i].addr << 1) & 0xff;
+		i2c_dprintk(2, "%s %s addr=0x%x len=%d:",
+			 (msgs[i].flags & I2C_M_RD) ? "read" : "write",
+			 i == num - 1 ? "stop" : "nonstop", addr, msgs[i].len);
+		if (msgs[i].flags & I2C_M_RD) {
+			/* read request without preceding register selection */
+			/*
+			 * The TM6000 only supports a read transaction
+			 * immediately after a 1 or 2 byte write to select
+			 * a register.  We cannot fulfil this request.
+			 */
+			i2c_dprintk(2, " read without preceding write not"
+				       " supported");
+			rc = -EOPNOTSUPP;
+			goto err;
+		} else if (i + 1 < num && msgs[i].len <= 2 &&
+			   (msgs[i + 1].flags & I2C_M_RD) &&
+			   msgs[i].addr == msgs[i + 1].addr) {
+			/* 1 or 2 byte write followed by a read */
+			if (i2c_debug >= 2)
+				for (byte = 0; byte < msgs[i].len; byte++)
+					printk(KERN_CONT " %02x", msgs[i].buf[byte]);
+			i2c_dprintk(2, "; joined to read %s len=%d:",
+				    i == num - 2 ? "stop" : "nonstop",
+				    msgs[i + 1].len);
+
+			if (msgs[i].len == 2) {
+				rc = tm6000_i2c_recv_regs16(dev, addr,
+					msgs[i].buf[0] << 8 | msgs[i].buf[1],
+					msgs[i + 1].buf, msgs[i + 1].len);
+			} else {
+				rc = tm6000_i2c_recv_regs(dev, addr, msgs[i].buf[0],
+					msgs[i + 1].buf, msgs[i + 1].len);
+			}
+
+			i++;
+
+			if (addr == dev->tuner_addr << 1) {
+				tm6000_set_reg(dev, REQ_50_SET_START, 0, 0);
+				tm6000_set_reg(dev, REQ_51_SET_STOP, 0, 0);
+			}
+			if (i2c_debug >= 2)
+				for (byte = 0; byte < msgs[i].len; byte++)
+					printk(KERN_CONT " %02x", msgs[i].buf[byte]);
+		} else {
+			/* write bytes */
+			if (i2c_debug >= 2)
+				for (byte = 0; byte < msgs[i].len; byte++)
+					printk(KERN_CONT " %02x", msgs[i].buf[byte]);
+			rc = tm6000_i2c_send_regs(dev, addr, msgs[i].buf[0],
+				msgs[i].buf + 1, msgs[i].len - 1);
+		}
+		if (i2c_debug >= 2)
+			printk(KERN_CONT "\n");
+		if (rc < 0)
+			goto err;
+	}
+
+	return num;
+err:
+	i2c_dprintk(2, " ERROR: %i\n", rc);
+	return rc;
+}
+
+static int tm6000_i2c_eeprom(struct tm6000_core *dev)
+{
+	int i, rc;
+	unsigned char *p = dev->eedata;
+	unsigned char bytes[17];
+
+	dev->i2c_client.addr = 0xa0 >> 1;
+	dev->eedata_size = 0;
+
+	bytes[16] = '\0';
+	for (i = 0; i < sizeof(dev->eedata); ) {
+		*p = i;
+		rc = tm6000_i2c_recv_regs(dev, 0xa0, i, p, 1);
+		if (rc < 1) {
+			if (p == dev->eedata)
+				goto noeeprom;
+			else {
+				printk(KERN_WARNING
+				"%s: i2c eeprom read error (err=%d)\n",
+				dev->name, rc);
+			}
+			return -EINVAL;
+		}
+		dev->eedata_size++;
+		p++;
+		if (0 == (i % 16))
+			printk(KERN_INFO "%s: i2c eeprom %02x:", dev->name, i);
+		printk(KERN_CONT " %02x", dev->eedata[i]);
+		if ((dev->eedata[i] >= ' ') && (dev->eedata[i] <= 'z'))
+			bytes[i%16] = dev->eedata[i];
+		else
+			bytes[i%16] = '.';
+
+		i++;
+
+		if (0 == (i % 16)) {
+			bytes[16] = '\0';
+			printk(KERN_CONT "  %s\n", bytes);
+		}
+	}
+	if (0 != (i%16)) {
+		bytes[i%16] = '\0';
+		for (i %= 16; i < 16; i++)
+			printk(KERN_CONT "   ");
+		printk(KERN_CONT "  %s\n", bytes);
+	}
+
+	return 0;
+
+noeeprom:
+	printk(KERN_INFO "%s: Huh, no eeprom present (err=%d)?\n",
+	       dev->name, rc);
+	return -EINVAL;
+}
+
+/* ----------------------------------------------------------- */
+
+/*
+ * functionality()
+ */
+static u32 functionality(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm tm6000_algo = {
+	.master_xfer   = tm6000_i2c_xfer,
+	.functionality = functionality,
+};
+
+/* ----------------------------------------------------------- */
+
+/*
+ * tm6000_i2c_register()
+ * register i2c bus
+ */
+int tm6000_i2c_register(struct tm6000_core *dev)
+{
+	int rc;
+
+	dev->i2c_adap.owner = THIS_MODULE;
+	dev->i2c_adap.algo = &tm6000_algo;
+	dev->i2c_adap.dev.parent = &dev->udev->dev;
+	strlcpy(dev->i2c_adap.name, dev->name, sizeof(dev->i2c_adap.name));
+	dev->i2c_adap.algo_data = dev;
+	i2c_set_adapdata(&dev->i2c_adap, &dev->v4l2_dev);
+	rc = i2c_add_adapter(&dev->i2c_adap);
+	if (rc)
+		return rc;
+
+	dev->i2c_client.adapter = &dev->i2c_adap;
+	strlcpy(dev->i2c_client.name, "tm6000 internal", I2C_NAME_SIZE);
+	tm6000_i2c_eeprom(dev);
+
+	return 0;
+}
+
+/*
+ * tm6000_i2c_unregister()
+ * unregister i2c_bus
+ */
+int tm6000_i2c_unregister(struct tm6000_core *dev)
+{
+	i2c_del_adapter(&dev->i2c_adap);
+	return 0;
+}
diff --git a/kernel/drivers/media/usb/tm6000/tm6000-input.c b/kernel/drivers/media/usb/tm6000/tm6000-input.c
new file mode 100644
index 000000000..26b2ebb62
--- /dev/null
+++ b/kernel/drivers/media/usb/tm6000/tm6000-input.c
@@ -0,0 +1,520 @@
+/*
+ *  tm6000-input.c - driver for TM5600/TM6000/TM6010 USB video capture devices
+ *
+ *  Copyright (C) 2010 Stefan Ringel <stefan.ringel@arcor.de>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation version 2
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+
+#include <linux/input.h>
+#include <linux/usb.h>
+
+#include <media/rc-core.h>
+
+#include "tm6000.h"
+#include "tm6000-regs.h"
+
+static unsigned int ir_debug;
+module_param(ir_debug, int, 0644);
+MODULE_PARM_DESC(ir_debug, "debug message level");
+
+static unsigned int enable_ir = 1;
+module_param(enable_ir, int, 0644);
+MODULE_PARM_DESC(enable_ir, "enable ir (default is enable)");
+
+static unsigned int ir_clock_mhz = 12;
+module_param(ir_clock_mhz, int, 0644);
+MODULE_PARM_DESC(enable_ir, "ir clock, in MHz");
+
+#define URB_SUBMIT_DELAY	100	/* ms - Delay to submit an URB request on retrial and init */
+#define URB_INT_LED_DELAY	100	/* ms - Delay to turn led on again on int mode */
+
+#undef dprintk
+
+#define dprintk(level, fmt, arg...) do {\
+	if (ir_debug >= level) \
+		printk(KERN_DEBUG "%s/ir: " fmt, ir->name , ## arg); \
+	} while (0)
+
+struct tm6000_ir_poll_result {
+	u16 rc_data;
+};
+
+struct tm6000_IR {
+	struct tm6000_core	*dev;
+	struct rc_dev		*rc;
+	char			name[32];
+	char			phys[32];
+
+	/* poll expernal decoder */
+	int			polling;
+	struct delayed_work	work;
+	u8			wait:1;
+	u8			pwled:2;
+	u8			submit_urb:1;
+	u16			key_addr;
+	struct urb		*int_urb;
+
+	/* IR device properties */
+	u64			rc_type;
+};
+
+void tm6000_ir_wait(struct tm6000_core *dev, u8 state)
+{
+	struct tm6000_IR *ir = dev->ir;
+
+	if (!dev->ir)
+		return;
+
+	dprintk(2, "%s: %i\n",__func__, ir->wait);
+
+	if (state)
+		ir->wait = 1;
+	else
+		ir->wait = 0;
+}
+
+static int tm6000_ir_config(struct tm6000_IR *ir)
+{
+	struct tm6000_core *dev = ir->dev;
+	u32 pulse = 0, leader = 0;
+
+	dprintk(2, "%s\n",__func__);
+
+	/*
+	 * The IR decoder supports RC-5 or NEC, with a configurable timing.
+	 * The timing configuration there is not that accurate, as it uses
+	 * approximate values. The NEC spec mentions a 562.5 unit period,
+	 * and RC-5 uses a 888.8 period.
+	 * Currently, driver assumes a clock provided by a 12 MHz XTAL, but
+	 * a modprobe parameter can adjust it.
+	 * Adjustments are required for other timings.
+	 * It seems that the 900ms timing for NEC is used to detect a RC-5
+	 * IR, in order to discard such decoding
+	 */
+
+	switch (ir->rc_type) {
+	case RC_BIT_NEC:
+		leader = 900;	/* ms */
+		pulse  = 700;	/* ms - the actual value would be 562 */
+		break;
+	default:
+	case RC_BIT_RC5:
+		leader = 900;	/* ms - from the NEC decoding */
+		pulse  = 1780;	/* ms - The actual value would be 1776 */
+		break;
+	}
+
+	pulse = ir_clock_mhz * pulse;
+	leader = ir_clock_mhz * leader;
+	if (ir->rc_type == RC_BIT_NEC)
+		leader = leader | 0x8000;
+
+	dprintk(2, "%s: %s, %d MHz, leader = 0x%04x, pulse = 0x%06x \n",
+		__func__,
+		(ir->rc_type == RC_BIT_NEC) ? "NEC" : "RC-5",
+		ir_clock_mhz, leader, pulse);
+
+	/* Remote WAKEUP = enable, normal mode, from IR decoder output */
+	tm6000_set_reg(dev, TM6010_REQ07_RE5_REMOTE_WAKEUP, 0xfe);
+
+	/* Enable IR reception on non-busrt mode */
+	tm6000_set_reg(dev, TM6010_REQ07_RD8_IR, 0x2f);
+
+	/* IR_WKUP_SEL = Low byte in decoded IR data */
+	tm6000_set_reg(dev, TM6010_REQ07_RDA_IR_WAKEUP_SEL, 0xff);
+	/* IR_WKU_ADD code */
+	tm6000_set_reg(dev, TM6010_REQ07_RDB_IR_WAKEUP_ADD, 0xff);
+
+	tm6000_set_reg(dev, TM6010_REQ07_RDC_IR_LEADER1, leader >> 8);
+	tm6000_set_reg(dev, TM6010_REQ07_RDD_IR_LEADER0, leader);
+
+	tm6000_set_reg(dev, TM6010_REQ07_RDE_IR_PULSE_CNT1, pulse >> 8);
+	tm6000_set_reg(dev, TM6010_REQ07_RDF_IR_PULSE_CNT0, pulse);
+
+	if (!ir->polling)
+		tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 2, 0);
+	else
+		tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 2, 1);
+	msleep(10);
+
+	/* Shows that IR is working via the LED */
+	tm6000_flash_led(dev, 0);
+	msleep(100);
+	tm6000_flash_led(dev, 1);
+	ir->pwled = 1;
+
+	return 0;
+}
+
+static void tm6000_ir_keydown(struct tm6000_IR *ir,
+			      const char *buf, unsigned int len)
+{
+	u8 device, command;
+	u32 scancode;
+	enum rc_type protocol;
+
+	if (len < 1)
+		return;
+
+	command = buf[0];
+	device = (len > 1 ? buf[1] : 0x0);
+	switch (ir->rc_type) {
+	case RC_BIT_RC5:
+		protocol = RC_TYPE_RC5;
+		scancode = RC_SCANCODE_RC5(device, command);
+		break;
+	case RC_BIT_NEC:
+		protocol = RC_TYPE_NEC;
+		scancode = RC_SCANCODE_NEC(device, command);
+		break;
+	default:
+		protocol = RC_TYPE_OTHER;
+		scancode = RC_SCANCODE_OTHER(device << 8 | command);
+		break;
+	}
+
+	dprintk(1, "%s, protocol: 0x%04x, scancode: 0x%08x\n",
+		__func__, protocol, scancode);
+	rc_keydown(ir->rc, protocol, scancode, 0);
+}
+
+static void tm6000_ir_urb_received(struct urb *urb)
+{
+	struct tm6000_core *dev = urb->context;
+	struct tm6000_IR *ir = dev->ir;
+	char *buf;
+
+	dprintk(2, "%s\n",__func__);
+	if (urb->status < 0 || urb->actual_length <= 0) {
+		printk(KERN_INFO "tm6000: IR URB failure: status: %i, length %i\n",
+		       urb->status, urb->actual_length);
+		ir->submit_urb = 1;
+		schedule_delayed_work(&ir->work, msecs_to_jiffies(URB_SUBMIT_DELAY));
+		return;
+	}
+	buf = urb->transfer_buffer;
+
+	if (ir_debug)
+		print_hex_dump(KERN_DEBUG, "tm6000: IR data: ",
+			       DUMP_PREFIX_OFFSET,16, 1,
+			       buf, urb->actual_length, false);
+
+	tm6000_ir_keydown(ir, urb->transfer_buffer, urb->actual_length);
+
+	usb_submit_urb(urb, GFP_ATOMIC);
+	/*
+	 * Flash the led. We can't do it here, as it is running on IRQ context.
+	 * So, use the scheduler to do it, in a few ms.
+	 */
+	ir->pwled = 2;
+	schedule_delayed_work(&ir->work, msecs_to_jiffies(10));
+}
+
+static void tm6000_ir_handle_key(struct work_struct *work)
+{
+	struct tm6000_IR *ir = container_of(work, struct tm6000_IR, work.work);
+	struct tm6000_core *dev = ir->dev;
+	int rc;
+	u8 buf[2];
+
+	if (ir->wait)
+		return;
+
+	dprintk(3, "%s\n",__func__);
+
+	rc = tm6000_read_write_usb(dev, USB_DIR_IN |
+		USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+		REQ_02_GET_IR_CODE, 0, 0, buf, 2);
+	if (rc < 0)
+		return;
+
+	/* Check if something was read */
+	if ((buf[0] & 0xff) == 0xff) {
+		if (!ir->pwled) {
+			tm6000_flash_led(dev, 1);
+			ir->pwled = 1;
+		}
+		return;
+	}
+
+	tm6000_ir_keydown(ir, buf, rc);
+	tm6000_flash_led(dev, 0);
+	ir->pwled = 0;
+
+	/* Re-schedule polling */
+	schedule_delayed_work(&ir->work, msecs_to_jiffies(ir->polling));
+}
+
+static void tm6000_ir_int_work(struct work_struct *work)
+{
+	struct tm6000_IR *ir = container_of(work, struct tm6000_IR, work.work);
+	struct tm6000_core *dev = ir->dev;
+	int rc;
+
+	dprintk(3, "%s, submit_urb = %d, pwled = %d\n",__func__, ir->submit_urb,
+		ir->pwled);
+
+	if (ir->submit_urb) {
+		dprintk(3, "Resubmit urb\n");
+		tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 2, 0);
+
+		rc = usb_submit_urb(ir->int_urb, GFP_ATOMIC);
+		if (rc < 0) {
+			printk(KERN_ERR "tm6000: Can't submit an IR interrupt. Error %i\n",
+			       rc);
+			/* Retry in 100 ms */
+			schedule_delayed_work(&ir->work, msecs_to_jiffies(URB_SUBMIT_DELAY));
+			return;
+		}
+		ir->submit_urb = 0;
+	}
+
+	/* Led is enabled only if USB submit doesn't fail */
+	if (ir->pwled == 2) {
+		tm6000_flash_led(dev, 0);
+		ir->pwled = 0;
+		schedule_delayed_work(&ir->work, msecs_to_jiffies(URB_INT_LED_DELAY));
+	} else if (!ir->pwled) {
+		tm6000_flash_led(dev, 1);
+		ir->pwled = 1;
+	}
+}
+
+static int tm6000_ir_start(struct rc_dev *rc)
+{
+	struct tm6000_IR *ir = rc->priv;
+
+	dprintk(2, "%s\n",__func__);
+
+	schedule_delayed_work(&ir->work, 0);
+
+	return 0;
+}
+
+static void tm6000_ir_stop(struct rc_dev *rc)
+{
+	struct tm6000_IR *ir = rc->priv;
+
+	dprintk(2, "%s\n",__func__);
+
+	cancel_delayed_work_sync(&ir->work);
+}
+
+static int tm6000_ir_change_protocol(struct rc_dev *rc, u64 *rc_type)
+{
+	struct tm6000_IR *ir = rc->priv;
+
+	if (!ir)
+		return 0;
+
+	dprintk(2, "%s\n",__func__);
+
+	if ((rc->rc_map.scan) && (*rc_type == RC_BIT_NEC))
+		ir->key_addr = ((rc->rc_map.scan[0].scancode >> 8) & 0xffff);
+
+	ir->rc_type = *rc_type;
+
+	tm6000_ir_config(ir);
+	/* TODO */
+	return 0;
+}
+
+static int __tm6000_ir_int_start(struct rc_dev *rc)
+{
+	struct tm6000_IR *ir = rc->priv;
+	struct tm6000_core *dev;
+	int pipe, size;
+	int err = -ENOMEM;
+
+	if (!ir)
+		return -ENODEV;
+	dev = ir->dev;
+
+	dprintk(2, "%s\n",__func__);
+
+	ir->int_urb = usb_alloc_urb(0, GFP_ATOMIC);
+	if (!ir->int_urb)
+		return -ENOMEM;
+
+	pipe = usb_rcvintpipe(dev->udev,
+		dev->int_in.endp->desc.bEndpointAddress
+		& USB_ENDPOINT_NUMBER_MASK);
+
+	size = usb_maxpacket(dev->udev, pipe, usb_pipeout(pipe));
+	dprintk(1, "IR max size: %d\n", size);
+
+	ir->int_urb->transfer_buffer = kzalloc(size, GFP_ATOMIC);
+	if (ir->int_urb->transfer_buffer == NULL) {
+		usb_free_urb(ir->int_urb);
+		return err;
+	}
+	dprintk(1, "int interval: %d\n", dev->int_in.endp->desc.bInterval);
+
+	usb_fill_int_urb(ir->int_urb, dev->udev, pipe,
+		ir->int_urb->transfer_buffer, size,
+		tm6000_ir_urb_received, dev,
+		dev->int_in.endp->desc.bInterval);
+
+	ir->submit_urb = 1;
+	schedule_delayed_work(&ir->work, msecs_to_jiffies(URB_SUBMIT_DELAY));
+
+	return 0;
+}
+
+static void __tm6000_ir_int_stop(struct rc_dev *rc)
+{
+	struct tm6000_IR *ir = rc->priv;
+
+	if (!ir || !ir->int_urb)
+		return;
+
+	dprintk(2, "%s\n",__func__);
+
+	usb_kill_urb(ir->int_urb);
+	kfree(ir->int_urb->transfer_buffer);
+	usb_free_urb(ir->int_urb);
+	ir->int_urb = NULL;
+}
+
+int tm6000_ir_int_start(struct tm6000_core *dev)
+{
+	struct tm6000_IR *ir = dev->ir;
+
+	if (!ir)
+		return 0;
+
+	return __tm6000_ir_int_start(ir->rc);
+}
+
+void tm6000_ir_int_stop(struct tm6000_core *dev)
+{
+	struct tm6000_IR *ir = dev->ir;
+
+	if (!ir || !ir->rc)
+		return;
+
+	__tm6000_ir_int_stop(ir->rc);
+}
+
+int tm6000_ir_init(struct tm6000_core *dev)
+{
+	struct tm6000_IR *ir;
+	struct rc_dev *rc;
+	int err = -ENOMEM;
+	u64 rc_type;
+
+	if (!enable_ir)
+		return -ENODEV;
+
+	if (!dev->caps.has_remote)
+		return 0;
+
+	if (!dev->ir_codes)
+		return 0;
+
+	ir = kzalloc(sizeof(*ir), GFP_ATOMIC);
+	rc = rc_allocate_device();
+	if (!ir || !rc)
+		goto out;
+
+	dprintk(2, "%s\n", __func__);
+
+	/* record handles to ourself */
+	ir->dev = dev;
+	dev->ir = ir;
+	ir->rc = rc;
+
+	/* input setup */
+	rc->allowed_protocols = RC_BIT_RC5 | RC_BIT_NEC;
+	/* Neded, in order to support NEC remotes with 24 or 32 bits */
+	rc->scancode_mask = 0xffff;
+	rc->priv = ir;
+	rc->change_protocol = tm6000_ir_change_protocol;
+	if (dev->int_in.endp) {
+		rc->open    = __tm6000_ir_int_start;
+		rc->close   = __tm6000_ir_int_stop;
+		INIT_DELAYED_WORK(&ir->work, tm6000_ir_int_work);
+	} else {
+		rc->open  = tm6000_ir_start;
+		rc->close = tm6000_ir_stop;
+		ir->polling = 50;
+		INIT_DELAYED_WORK(&ir->work, tm6000_ir_handle_key);
+	}
+	rc->driver_type = RC_DRIVER_SCANCODE;
+
+	snprintf(ir->name, sizeof(ir->name), "tm5600/60x0 IR (%s)",
+						dev->name);
+
+	usb_make_path(dev->udev, ir->phys, sizeof(ir->phys));
+	strlcat(ir->phys, "/input0", sizeof(ir->phys));
+
+	rc_type = RC_BIT_UNKNOWN;
+	tm6000_ir_change_protocol(rc, &rc_type);
+
+	rc->input_name = ir->name;
+	rc->input_phys = ir->phys;
+	rc->input_id.bustype = BUS_USB;
+	rc->input_id.version = 1;
+	rc->input_id.vendor = le16_to_cpu(dev->udev->descriptor.idVendor);
+	rc->input_id.product = le16_to_cpu(dev->udev->descriptor.idProduct);
+	rc->map_name = dev->ir_codes;
+	rc->driver_name = "tm6000";
+	rc->dev.parent = &dev->udev->dev;
+
+	/* ir register */
+	err = rc_register_device(rc);
+	if (err)
+		goto out;
+
+	return 0;
+
+out:
+	dev->ir = NULL;
+	rc_free_device(rc);
+	kfree(ir);
+	return err;
+}
+
+int tm6000_ir_fini(struct tm6000_core *dev)
+{
+	struct tm6000_IR *ir = dev->ir;
+
+	/* skip detach on non attached board */
+
+	if (!ir)
+		return 0;
+
+	dprintk(2, "%s\n",__func__);
+
+	if (!ir->polling)
+		__tm6000_ir_int_stop(ir->rc);
+
+	tm6000_ir_stop(ir->rc);
+
+	/* Turn off the led */
+	tm6000_flash_led(dev, 0);
+	ir->pwled = 0;
+
+	rc_unregister_device(ir->rc);
+
+	kfree(ir);
+	dev->ir = NULL;
+
+	return 0;
+}
diff --git a/kernel/drivers/media/usb/tm6000/tm6000-regs.h b/kernel/drivers/media/usb/tm6000/tm6000-regs.h
new file mode 100644
index 000000000..a38c251ed
--- /dev/null
+++ b/kernel/drivers/media/usb/tm6000/tm6000-regs.h
@@ -0,0 +1,600 @@
+/*
+ *  tm6000-regs.h - driver for TM5600/TM6000/TM6010 USB video capture devices
+ *
+ *  Copyright (C) 2006-2007 Mauro Carvalho Chehab <mchehab@infradead.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation version 2
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+ * Define TV Master TM5600/TM6000/TM6010 Request codes
+ */
+#define REQ_00_SET_IR_VALUE		0
+#define REQ_01_SET_WAKEUP_IRCODE	1
+#define REQ_02_GET_IR_CODE		2
+#define REQ_03_SET_GET_MCU_PIN		3
+#define REQ_04_EN_DISABLE_MCU_INT	4
+#define REQ_05_SET_GET_USBREG		5
+	/* Write: RegNum, Value, 0 */
+	/* Read : RegNum, Value, 1, RegStatus */
+#define REQ_06_SET_GET_USBREG_BIT	6
+#define REQ_07_SET_GET_AVREG		7
+	/* Write: RegNum, Value, 0 */
+	/* Read : RegNum, Value, 1, RegStatus */
+#define REQ_08_SET_GET_AVREG_BIT	8
+#define REQ_09_SET_GET_TUNER_FQ		9
+#define REQ_10_SET_TUNER_SYSTEM		10
+#define REQ_11_SET_EEPROM_ADDR		11
+#define REQ_12_SET_GET_EEPROMBYTE	12
+#define REQ_13_GET_EEPROM_SEQREAD	13
+#define REQ_14_SET_GET_I2C_WR2_RDN	14
+#define REQ_15_SET_GET_I2CBYTE		15
+	/* Write: Subaddr, Slave Addr, value, 0 */
+	/* Read : Subaddr, Slave Addr, value, 1 */
+#define REQ_16_SET_GET_I2C_WR1_RDN	16
+	/* Subaddr, Slave Addr, 0, length */
+#define REQ_17_SET_GET_I2CFP		17
+	/* Write: Slave Addr, register, value */
+	/* Read : Slave Addr, register, 2, data */
+#define REQ_20_DATA_TRANSFER		20
+#define REQ_30_I2C_WRITE		30
+#define REQ_31_I2C_READ			31
+#define REQ_35_AFTEK_TUNER_READ		35
+#define REQ_40_GET_VERSION		40
+#define REQ_50_SET_START		50
+#define REQ_51_SET_STOP			51
+#define REQ_52_TRANSMIT_DATA		52
+#define REQ_53_SPI_INITIAL		53
+#define REQ_54_SPI_SETSTART		54
+#define REQ_55_SPI_INOUTDATA		55
+#define REQ_56_SPI_SETSTOP		56
+
+/*
+ * Define TV Master TM5600/TM6000/TM6010 GPIO lines
+ */
+
+#define TM6000_GPIO_CLK		0x101
+#define TM6000_GPIO_DATA	0x100
+
+#define TM6000_GPIO_1		0x102
+#define TM6000_GPIO_2		0x103
+#define TM6000_GPIO_3		0x104
+#define TM6000_GPIO_4		0x300
+#define TM6000_GPIO_5		0x301
+#define TM6000_GPIO_6		0x304
+#define TM6000_GPIO_7		0x305
+
+/* tm6010 defines GPIO with different values */
+#define TM6010_GPIO_0      0x0102
+#define TM6010_GPIO_1      0x0103
+#define TM6010_GPIO_2      0x0104
+#define TM6010_GPIO_3      0x0105
+#define TM6010_GPIO_4      0x0106
+#define TM6010_GPIO_5      0x0107
+#define TM6010_GPIO_6      0x0300
+#define TM6010_GPIO_7      0x0301
+#define TM6010_GPIO_9      0x0305
+/*
+ * Define TV Master TM5600/TM6000/TM6010 URB message codes and length
+ */
+
+enum {
+	TM6000_URB_MSG_VIDEO = 1,
+	TM6000_URB_MSG_AUDIO,
+	TM6000_URB_MSG_VBI,
+	TM6000_URB_MSG_PTS,
+	TM6000_URB_MSG_ERR,
+};
+
+/* Define specific TM6000 Video decoder registers */
+#define TM6000_REQ07_RD8_TEST_SEL			0x07, 0xd8
+#define TM6000_REQ07_RD9_A_SIM_SEL			0x07, 0xd9
+#define TM6000_REQ07_RDA_CLK_SEL			0x07, 0xda
+#define TM6000_REQ07_RDB_OUT_SEL			0x07, 0xdb
+#define TM6000_REQ07_RDC_NSEL_I2S			0x07, 0xdc
+#define TM6000_REQ07_RDD_GPIO2_MDRV			0x07, 0xdd
+#define TM6000_REQ07_RDE_GPIO1_MDRV			0x07, 0xde
+#define TM6000_REQ07_RDF_PWDOWN_ACLK			0x07, 0xdf
+#define TM6000_REQ07_RE0_VADC_REF_CTL			0x07, 0xe0
+#define TM6000_REQ07_RE1_VADC_DACLIMP			0x07, 0xe1
+#define TM6000_REQ07_RE2_VADC_STATUS_CTL		0x07, 0xe2
+#define TM6000_REQ07_RE3_VADC_INP_LPF_SEL1		0x07, 0xe3
+#define TM6000_REQ07_RE4_VADC_TARGET1			0x07, 0xe4
+#define TM6000_REQ07_RE5_VADC_INP_LPF_SEL2		0x07, 0xe5
+#define TM6000_REQ07_RE6_VADC_TARGET2			0x07, 0xe6
+#define TM6000_REQ07_RE7_VADC_AGAIN_CTL			0x07, 0xe7
+#define TM6000_REQ07_RE8_VADC_PWDOWN_CTL		0x07, 0xe8
+#define TM6000_REQ07_RE9_VADC_INPUT_CTL1		0x07, 0xe9
+#define TM6000_REQ07_REA_VADC_INPUT_CTL2		0x07, 0xea
+#define TM6000_REQ07_REB_VADC_AADC_MODE			0x07, 0xeb
+#define TM6000_REQ07_REC_VADC_AADC_LVOL			0x07, 0xec
+#define TM6000_REQ07_RED_VADC_AADC_RVOL			0x07, 0xed
+#define TM6000_REQ07_REE_VADC_CTRL_SEL_CONTROL		0x07, 0xee
+#define TM6000_REQ07_REF_VADC_GAIN_MAP_CTL		0x07, 0xef
+#define TM6000_REQ07_RFD_BIST_ERR_VST_LOW		0x07, 0xfd
+#define TM6000_REQ07_RFE_BIST_ERR_VST_HIGH		0x07, 0xfe
+
+/* Define TM6000/TM6010 Video decoder registers */
+#define TM6010_REQ07_R00_VIDEO_CONTROL0			0x07, 0x00
+#define TM6010_REQ07_R01_VIDEO_CONTROL1			0x07, 0x01
+#define TM6010_REQ07_R02_VIDEO_CONTROL2			0x07, 0x02
+#define TM6010_REQ07_R03_YC_SEP_CONTROL			0x07, 0x03
+#define TM6010_REQ07_R04_LUMA_HAGC_CONTROL		0x07, 0x04
+#define TM6010_REQ07_R05_NOISE_THRESHOLD		0x07, 0x05
+#define TM6010_REQ07_R06_AGC_GATE_THRESHOLD		0x07, 0x06
+#define TM6010_REQ07_R07_OUTPUT_CONTROL			0x07, 0x07
+#define TM6010_REQ07_R08_LUMA_CONTRAST_ADJ		0x07, 0x08
+#define TM6010_REQ07_R09_LUMA_BRIGHTNESS_ADJ		0x07, 0x09
+#define TM6010_REQ07_R0A_CHROMA_SATURATION_ADJ		0x07, 0x0a
+#define TM6010_REQ07_R0B_CHROMA_HUE_PHASE_ADJ		0x07, 0x0b
+#define TM6010_REQ07_R0C_CHROMA_AGC_CONTROL		0x07, 0x0c
+#define TM6010_REQ07_R0D_CHROMA_KILL_LEVEL		0x07, 0x0d
+#define TM6010_REQ07_R0F_CHROMA_AUTO_POSITION		0x07, 0x0f
+#define TM6010_REQ07_R10_AGC_PEAK_NOMINAL		0x07, 0x10
+#define TM6010_REQ07_R11_AGC_PEAK_CONTROL		0x07, 0x11
+#define TM6010_REQ07_R12_AGC_GATE_STARTH		0x07, 0x12
+#define TM6010_REQ07_R13_AGC_GATE_STARTL		0x07, 0x13
+#define TM6010_REQ07_R14_AGC_GATE_WIDTH			0x07, 0x14
+#define TM6010_REQ07_R15_AGC_BP_DELAY			0x07, 0x15
+#define TM6010_REQ07_R16_LOCK_COUNT			0x07, 0x16
+#define TM6010_REQ07_R17_HLOOP_MAXSTATE			0x07, 0x17
+#define TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3		0x07, 0x18
+#define TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2		0x07, 0x19
+#define TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1		0x07, 0x1a
+#define TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0		0x07, 0x1b
+#define TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3		0x07, 0x1c
+#define TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2		0x07, 0x1d
+#define TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1		0x07, 0x1e
+#define TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0		0x07, 0x1f
+#define TM6010_REQ07_R20_HSYNC_RISING_EDGE_TIME		0x07, 0x20
+#define TM6010_REQ07_R21_HSYNC_PHASE_OFFSET		0x07, 0x21
+#define TM6010_REQ07_R22_HSYNC_PLL_START_TIME		0x07, 0x22
+#define TM6010_REQ07_R23_HSYNC_PLL_END_TIME		0x07, 0x23
+#define TM6010_REQ07_R24_HSYNC_TIP_START_TIME		0x07, 0x24
+#define TM6010_REQ07_R25_HSYNC_TIP_END_TIME		0x07, 0x25
+#define TM6010_REQ07_R26_HSYNC_RISING_EDGE_START	0x07, 0x26
+#define TM6010_REQ07_R27_HSYNC_RISING_EDGE_END		0x07, 0x27
+#define TM6010_REQ07_R28_BACKPORCH_START		0x07, 0x28
+#define TM6010_REQ07_R29_BACKPORCH_END			0x07, 0x29
+#define TM6010_REQ07_R2A_HSYNC_FILTER_START		0x07, 0x2a
+#define TM6010_REQ07_R2B_HSYNC_FILTER_END		0x07, 0x2b
+#define TM6010_REQ07_R2C_CHROMA_BURST_START		0x07, 0x2c
+#define TM6010_REQ07_R2D_CHROMA_BURST_END		0x07, 0x2d
+#define TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART		0x07, 0x2e
+#define TM6010_REQ07_R2F_ACTIVE_VIDEO_HWIDTH		0x07, 0x2f
+#define TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART		0x07, 0x30
+#define TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT		0x07, 0x31
+#define TM6010_REQ07_R32_VSYNC_HLOCK_MIN		0x07, 0x32
+#define TM6010_REQ07_R33_VSYNC_HLOCK_MAX		0x07, 0x33
+#define TM6010_REQ07_R34_VSYNC_AGC_MIN			0x07, 0x34
+#define TM6010_REQ07_R35_VSYNC_AGC_MAX			0x07, 0x35
+#define TM6010_REQ07_R36_VSYNC_VBI_MIN			0x07, 0x36
+#define TM6010_REQ07_R37_VSYNC_VBI_MAX			0x07, 0x37
+#define TM6010_REQ07_R38_VSYNC_THRESHOLD		0x07, 0x38
+#define TM6010_REQ07_R39_VSYNC_TIME_CONSTANT		0x07, 0x39
+#define TM6010_REQ07_R3A_STATUS1			0x07, 0x3a
+#define TM6010_REQ07_R3B_STATUS2			0x07, 0x3b
+#define TM6010_REQ07_R3C_STATUS3			0x07, 0x3c
+#define TM6010_REQ07_R3F_RESET				0x07, 0x3f
+#define TM6010_REQ07_R40_TELETEXT_VBI_CODE0		0x07, 0x40
+#define TM6010_REQ07_R41_TELETEXT_VBI_CODE1		0x07, 0x41
+#define TM6010_REQ07_R42_VBI_DATA_HIGH_LEVEL		0x07, 0x42
+#define TM6010_REQ07_R43_VBI_DATA_TYPE_LINE7		0x07, 0x43
+#define TM6010_REQ07_R44_VBI_DATA_TYPE_LINE8		0x07, 0x44
+#define TM6010_REQ07_R45_VBI_DATA_TYPE_LINE9		0x07, 0x45
+#define TM6010_REQ07_R46_VBI_DATA_TYPE_LINE10		0x07, 0x46
+#define TM6010_REQ07_R47_VBI_DATA_TYPE_LINE11		0x07, 0x47
+#define TM6010_REQ07_R48_VBI_DATA_TYPE_LINE12		0x07, 0x48
+#define TM6010_REQ07_R49_VBI_DATA_TYPE_LINE13		0x07, 0x49
+#define TM6010_REQ07_R4A_VBI_DATA_TYPE_LINE14		0x07, 0x4a
+#define TM6010_REQ07_R4B_VBI_DATA_TYPE_LINE15		0x07, 0x4b
+#define TM6010_REQ07_R4C_VBI_DATA_TYPE_LINE16		0x07, 0x4c
+#define TM6010_REQ07_R4D_VBI_DATA_TYPE_LINE17		0x07, 0x4d
+#define TM6010_REQ07_R4E_VBI_DATA_TYPE_LINE18		0x07, 0x4e
+#define TM6010_REQ07_R4F_VBI_DATA_TYPE_LINE19		0x07, 0x4f
+#define TM6010_REQ07_R50_VBI_DATA_TYPE_LINE20		0x07, 0x50
+#define TM6010_REQ07_R51_VBI_DATA_TYPE_LINE21		0x07, 0x51
+#define TM6010_REQ07_R52_VBI_DATA_TYPE_LINE22		0x07, 0x52
+#define TM6010_REQ07_R53_VBI_DATA_TYPE_LINE23		0x07, 0x53
+#define TM6010_REQ07_R54_VBI_DATA_TYPE_RLINES		0x07, 0x54
+#define TM6010_REQ07_R55_VBI_LOOP_FILTER_GAIN		0x07, 0x55
+#define TM6010_REQ07_R56_VBI_LOOP_FILTER_I_GAIN		0x07, 0x56
+#define TM6010_REQ07_R57_VBI_LOOP_FILTER_P_GAIN		0x07, 0x57
+#define TM6010_REQ07_R58_VBI_CAPTION_DTO1		0x07, 0x58
+#define TM6010_REQ07_R59_VBI_CAPTION_DTO0		0x07, 0x59
+#define TM6010_REQ07_R5A_VBI_TELETEXT_DTO1		0x07, 0x5a
+#define TM6010_REQ07_R5B_VBI_TELETEXT_DTO0		0x07, 0x5b
+#define TM6010_REQ07_R5C_VBI_WSS625_DTO1		0x07, 0x5c
+#define TM6010_REQ07_R5D_VBI_WSS625_DTO0		0x07, 0x5d
+#define TM6010_REQ07_R5E_VBI_CAPTION_FRAME_START	0x07, 0x5e
+#define TM6010_REQ07_R5F_VBI_WSS625_FRAME_START		0x07, 0x5f
+#define TM6010_REQ07_R60_TELETEXT_FRAME_START		0x07, 0x60
+#define TM6010_REQ07_R61_VBI_CCDATA1			0x07, 0x61
+#define TM6010_REQ07_R62_VBI_CCDATA2			0x07, 0x62
+#define TM6010_REQ07_R63_VBI_WSS625_DATA1		0x07, 0x63
+#define TM6010_REQ07_R64_VBI_WSS625_DATA2		0x07, 0x64
+#define TM6010_REQ07_R65_VBI_DATA_STATUS		0x07, 0x65
+#define TM6010_REQ07_R66_VBI_CAPTION_START		0x07, 0x66
+#define TM6010_REQ07_R67_VBI_WSS625_START		0x07, 0x67
+#define TM6010_REQ07_R68_VBI_TELETEXT_START		0x07, 0x68
+#define TM6010_REQ07_R70_HSYNC_DTO_INC_STATUS3		0x07, 0x70
+#define TM6010_REQ07_R71_HSYNC_DTO_INC_STATUS2		0x07, 0x71
+#define TM6010_REQ07_R72_HSYNC_DTO_INC_STATUS1		0x07, 0x72
+#define TM6010_REQ07_R73_HSYNC_DTO_INC_STATUS0		0x07, 0x73
+#define TM6010_REQ07_R74_CHROMA_DTO_INC_STATUS3		0x07, 0x74
+#define TM6010_REQ07_R75_CHROMA_DTO_INC_STATUS2		0x07, 0x75
+#define TM6010_REQ07_R76_CHROMA_DTO_INC_STATUS1		0x07, 0x76
+#define TM6010_REQ07_R77_CHROMA_DTO_INC_STATUS0		0x07, 0x77
+#define TM6010_REQ07_R78_AGC_AGAIN_STATUS		0x07, 0x78
+#define TM6010_REQ07_R79_AGC_DGAIN_STATUS		0x07, 0x79
+#define TM6010_REQ07_R7A_CHROMA_MAG_STATUS		0x07, 0x7a
+#define TM6010_REQ07_R7B_CHROMA_GAIN_STATUS1		0x07, 0x7b
+#define TM6010_REQ07_R7C_CHROMA_GAIN_STATUS0		0x07, 0x7c
+#define TM6010_REQ07_R7D_CORDIC_FREQ_STATUS		0x07, 0x7d
+#define TM6010_REQ07_R7F_STATUS_NOISE			0x07, 0x7f
+#define TM6010_REQ07_R80_COMB_FILTER_TRESHOLD		0x07, 0x80
+#define TM6010_REQ07_R82_COMB_FILTER_CONFIG		0x07, 0x82
+#define TM6010_REQ07_R83_CHROMA_LOCK_CONFIG		0x07, 0x83
+#define TM6010_REQ07_R84_NOISE_NTSC_C			0x07, 0x84
+#define TM6010_REQ07_R85_NOISE_PAL_C			0x07, 0x85
+#define TM6010_REQ07_R86_NOISE_PHASE_C			0x07, 0x86
+#define TM6010_REQ07_R87_NOISE_PHASE_Y			0x07, 0x87
+#define TM6010_REQ07_R8A_CHROMA_LOOPFILTER_STATE	0x07, 0x8a
+#define TM6010_REQ07_R8B_CHROMA_HRESAMPLER		0x07, 0x8b
+#define TM6010_REQ07_R8D_CPUMP_DELAY_ADJ		0x07, 0x8d
+#define TM6010_REQ07_R8E_CPUMP_ADJ			0x07, 0x8e
+#define TM6010_REQ07_R8F_CPUMP_DELAY			0x07, 0x8f
+
+/* Define TM6000/TM6010 Miscellaneous registers */
+#define TM6010_REQ07_RC0_ACTIVE_VIDEO_SOURCE		0x07, 0xc0
+#define TM6010_REQ07_RC1_TRESHOLD			0x07, 0xc1
+#define TM6010_REQ07_RC2_HSYNC_WIDTH			0x07, 0xc2
+#define TM6010_REQ07_RC3_HSTART1			0x07, 0xc3
+#define TM6010_REQ07_RC4_HSTART0			0x07, 0xc4
+#define TM6010_REQ07_RC5_HEND1				0x07, 0xc5
+#define TM6010_REQ07_RC6_HEND0				0x07, 0xc6
+#define TM6010_REQ07_RC7_VSTART1			0x07, 0xc7
+#define TM6010_REQ07_RC8_VSTART0			0x07, 0xc8
+#define TM6010_REQ07_RC9_VEND1				0x07, 0xc9
+#define TM6010_REQ07_RCA_VEND0				0x07, 0xca
+#define TM6010_REQ07_RCB_DELAY				0x07, 0xcb
+/* ONLY for TM6010 */
+#define TM6010_REQ07_RCC_ACTIVE_IF			0x07, 0xcc
+#define TM6010_REQ07_RCC_ACTIVE_IF_VIDEO_ENABLE (1 << 5)
+#define TM6010_REQ07_RCC_ACTIVE_IF_AUDIO_ENABLE (1 << 6)
+#define TM6010_REQ07_RD0_USB_PERIPHERY_CONTROL		0x07, 0xd0
+#define TM6010_REQ07_RD1_ADDR_FOR_REQ1			0x07, 0xd1
+#define TM6010_REQ07_RD2_ADDR_FOR_REQ2			0x07, 0xd2
+#define TM6010_REQ07_RD3_ADDR_FOR_REQ3			0x07, 0xd3
+#define TM6010_REQ07_RD4_ADDR_FOR_REQ4			0x07, 0xd4
+#define TM6010_REQ07_RD5_POWERSAVE			0x07, 0xd5
+#define TM6010_REQ07_RD6_ENDP_REQ1_REQ2			0x07, 0xd6
+#define TM6010_REQ07_RD7_ENDP_REQ3_REQ4			0x07, 0xd7
+/* ONLY for TM6010 */
+#define TM6010_REQ07_RD8_IR				0x07, 0xd8
+/* ONLY for TM6010 */
+#define TM6010_REQ07_RD9_IR_BSIZE			0x07, 0xd9
+/* ONLY for TM6010 */
+#define TM6010_REQ07_RDA_IR_WAKEUP_SEL			0x07, 0xda
+/* ONLY for TM6010 */
+#define TM6010_REQ07_RDB_IR_WAKEUP_ADD			0x07, 0xdb
+/* ONLY for TM6010 */
+#define TM6010_REQ07_RDC_IR_LEADER1			0x07, 0xdc
+/* ONLY for TM6010 */
+#define TM6010_REQ07_RDD_IR_LEADER0			0x07, 0xdd
+/* ONLY for TM6010 */
+#define TM6010_REQ07_RDE_IR_PULSE_CNT1			0x07, 0xde
+/* ONLY for TM6010 */
+#define TM6010_REQ07_RDF_IR_PULSE_CNT0			0x07, 0xdf
+/* ONLY for TM6010 */
+#define TM6010_REQ07_RE0_DVIDEO_SOURCE			0x07, 0xe0
+/* ONLY for TM6010 */
+#define TM6010_REQ07_RE0_DVIDEO_SOURCE_IF		0x07, 0xe1
+/* ONLY for TM6010 */
+#define TM6010_REQ07_RE2_OUT_SEL2			0x07, 0xe2
+/* ONLY for TM6010 */
+#define TM6010_REQ07_RE3_OUT_SEL1			0x07, 0xe3
+/* ONLY for TM6010 */
+#define TM6010_REQ07_RE4_OUT_SEL0			0x07, 0xe4
+/* ONLY for TM6010 */
+#define TM6010_REQ07_RE5_REMOTE_WAKEUP			0x07, 0xe5
+/* ONLY for TM6010 */
+#define TM6010_REQ07_RE7_PUB_GPIO			0x07, 0xe7
+/* ONLY for TM6010 */
+#define TM6010_REQ07_RE8_TYPESEL_MOS_I2S		0x07, 0xe8
+/* ONLY for TM6010 */
+#define TM6010_REQ07_RE9_TYPESEL_MOS_TS			0x07, 0xe9
+/* ONLY for TM6010 */
+#define TM6010_REQ07_REA_TYPESEL_MOS_CCIR		0x07, 0xea
+/* ONLY for TM6010 */
+#define TM6010_REQ07_RF0_BIST_CRC_RESULT0		0x07, 0xf0
+/* ONLY for TM6010 */
+#define TM6010_REQ07_RF1_BIST_CRC_RESULT1		0x07, 0xf1
+/* ONLY for TM6010 */
+#define TM6010_REQ07_RF2_BIST_CRC_RESULT2		0x07, 0xf2
+/* ONLY for TM6010 */
+#define TM6010_REQ07_RF3_BIST_CRC_RESULT3		0x07, 0xf3
+/* ONLY for TM6010 */
+#define TM6010_REQ07_RF4_BIST_ERR_VST2			0x07, 0xf4
+/* ONLY for TM6010 */
+#define TM6010_REQ07_RF5_BIST_ERR_VST1			0x07, 0xf5
+/* ONLY for TM6010 */
+#define TM6010_REQ07_RF6_BIST_ERR_VST0			0x07, 0xf6
+/* ONLY for TM6010 */
+#define TM6010_REQ07_RF7_BIST				0x07, 0xf7
+/* ONLY for TM6010 */
+#define TM6010_REQ07_RFE_POWER_DOWN			0x07, 0xfe
+#define TM6010_REQ07_RFF_SOFT_RESET			0x07, 0xff
+
+/* Define TM6000/TM6010 USB registers */
+#define TM6010_REQ05_R00_MAIN_CTRL		0x05, 0x00
+#define TM6010_REQ05_R01_DEVADDR		0x05, 0x01
+#define TM6010_REQ05_R02_TEST			0x05, 0x02
+#define TM6010_REQ05_R04_SOFN0			0x05, 0x04
+#define TM6010_REQ05_R05_SOFN1			0x05, 0x05
+#define TM6010_REQ05_R06_SOFTM0			0x05, 0x06
+#define TM6010_REQ05_R07_SOFTM1			0x05, 0x07
+#define TM6010_REQ05_R08_PHY_TEST		0x05, 0x08
+#define TM6010_REQ05_R09_VCTL			0x05, 0x09
+#define TM6010_REQ05_R0A_VSTA			0x05, 0x0a
+#define TM6010_REQ05_R0B_CX_CFG			0x05, 0x0b
+#define TM6010_REQ05_R0C_ENDP0_REG0		0x05, 0x0c
+#define TM6010_REQ05_R10_GMASK			0x05, 0x10
+#define TM6010_REQ05_R11_IMASK0			0x05, 0x11
+#define TM6010_REQ05_R12_IMASK1			0x05, 0x12
+#define TM6010_REQ05_R13_IMASK2			0x05, 0x13
+#define TM6010_REQ05_R14_IMASK3			0x05, 0x14
+#define TM6010_REQ05_R15_IMASK4			0x05, 0x15
+#define TM6010_REQ05_R16_IMASK5			0x05, 0x16
+#define TM6010_REQ05_R17_IMASK6			0x05, 0x17
+#define TM6010_REQ05_R18_IMASK7			0x05, 0x18
+#define TM6010_REQ05_R19_ZEROP0			0x05, 0x19
+#define TM6010_REQ05_R1A_ZEROP1			0x05, 0x1a
+#define TM6010_REQ05_R1C_FIFO_EMP0		0x05, 0x1c
+#define TM6010_REQ05_R1D_FIFO_EMP1		0x05, 0x1d
+#define TM6010_REQ05_R20_IRQ_GROUP		0x05, 0x20
+#define TM6010_REQ05_R21_IRQ_SOURCE0		0x05, 0x21
+#define TM6010_REQ05_R22_IRQ_SOURCE1		0x05, 0x22
+#define TM6010_REQ05_R23_IRQ_SOURCE2		0x05, 0x23
+#define TM6010_REQ05_R24_IRQ_SOURCE3		0x05, 0x24
+#define TM6010_REQ05_R25_IRQ_SOURCE4		0x05, 0x25
+#define TM6010_REQ05_R26_IRQ_SOURCE5		0x05, 0x26
+#define TM6010_REQ05_R27_IRQ_SOURCE6		0x05, 0x27
+#define TM6010_REQ05_R28_IRQ_SOURCE7		0x05, 0x28
+#define TM6010_REQ05_R29_SEQ_ERR0		0x05, 0x29
+#define TM6010_REQ05_R2A_SEQ_ERR1		0x05, 0x2a
+#define TM6010_REQ05_R2B_SEQ_ABORT0		0x05, 0x2b
+#define TM6010_REQ05_R2C_SEQ_ABORT1		0x05, 0x2c
+#define TM6010_REQ05_R2D_TX_ZERO0		0x05, 0x2d
+#define TM6010_REQ05_R2E_TX_ZERO1		0x05, 0x2e
+#define TM6010_REQ05_R2F_IDLE_CNT		0x05, 0x2f
+#define TM6010_REQ05_R30_FNO_P1			0x05, 0x30
+#define TM6010_REQ05_R31_FNO_P2			0x05, 0x31
+#define TM6010_REQ05_R32_FNO_P3			0x05, 0x32
+#define TM6010_REQ05_R33_FNO_P4			0x05, 0x33
+#define TM6010_REQ05_R34_FNO_P5			0x05, 0x34
+#define TM6010_REQ05_R35_FNO_P6			0x05, 0x35
+#define TM6010_REQ05_R36_FNO_P7			0x05, 0x36
+#define TM6010_REQ05_R37_FNO_P8			0x05, 0x37
+#define TM6010_REQ05_R38_FNO_P9			0x05, 0x38
+#define TM6010_REQ05_R30_FNO_P10		0x05, 0x39
+#define TM6010_REQ05_R30_FNO_P11		0x05, 0x3a
+#define TM6010_REQ05_R30_FNO_P12		0x05, 0x3b
+#define TM6010_REQ05_R30_FNO_P13		0x05, 0x3c
+#define TM6010_REQ05_R30_FNO_P14		0x05, 0x3d
+#define TM6010_REQ05_R30_FNO_P15		0x05, 0x3e
+#define TM6010_REQ05_R40_IN_MAXPS_LOW1		0x05, 0x40
+#define TM6010_REQ05_R41_IN_MAXPS_HIGH1		0x05, 0x41
+#define TM6010_REQ05_R42_IN_MAXPS_LOW2		0x05, 0x42
+#define TM6010_REQ05_R43_IN_MAXPS_HIGH2		0x05, 0x43
+#define TM6010_REQ05_R44_IN_MAXPS_LOW3		0x05, 0x44
+#define TM6010_REQ05_R45_IN_MAXPS_HIGH3		0x05, 0x45
+#define TM6010_REQ05_R46_IN_MAXPS_LOW4		0x05, 0x46
+#define TM6010_REQ05_R47_IN_MAXPS_HIGH4		0x05, 0x47
+#define TM6010_REQ05_R48_IN_MAXPS_LOW5		0x05, 0x48
+#define TM6010_REQ05_R49_IN_MAXPS_HIGH5		0x05, 0x49
+#define TM6010_REQ05_R4A_IN_MAXPS_LOW6		0x05, 0x4a
+#define TM6010_REQ05_R4B_IN_MAXPS_HIGH6		0x05, 0x4b
+#define TM6010_REQ05_R4C_IN_MAXPS_LOW7		0x05, 0x4c
+#define TM6010_REQ05_R4D_IN_MAXPS_HIGH7		0x05, 0x4d
+#define TM6010_REQ05_R4E_IN_MAXPS_LOW8		0x05, 0x4e
+#define TM6010_REQ05_R4F_IN_MAXPS_HIGH8		0x05, 0x4f
+#define TM6010_REQ05_R50_IN_MAXPS_LOW9		0x05, 0x50
+#define TM6010_REQ05_R51_IN_MAXPS_HIGH9		0x05, 0x51
+#define TM6010_REQ05_R40_IN_MAXPS_LOW10		0x05, 0x52
+#define TM6010_REQ05_R41_IN_MAXPS_HIGH10	0x05, 0x53
+#define TM6010_REQ05_R40_IN_MAXPS_LOW11		0x05, 0x54
+#define TM6010_REQ05_R41_IN_MAXPS_HIGH11	0x05, 0x55
+#define TM6010_REQ05_R40_IN_MAXPS_LOW12		0x05, 0x56
+#define TM6010_REQ05_R41_IN_MAXPS_HIGH12	0x05, 0x57
+#define TM6010_REQ05_R40_IN_MAXPS_LOW13		0x05, 0x58
+#define TM6010_REQ05_R41_IN_MAXPS_HIGH13	0x05, 0x59
+#define TM6010_REQ05_R40_IN_MAXPS_LOW14		0x05, 0x5a
+#define TM6010_REQ05_R41_IN_MAXPS_HIGH14	0x05, 0x5b
+#define TM6010_REQ05_R40_IN_MAXPS_LOW15		0x05, 0x5c
+#define TM6010_REQ05_R41_IN_MAXPS_HIGH15	0x05, 0x5d
+#define TM6010_REQ05_R60_OUT_MAXPS_LOW1		0x05, 0x60
+#define TM6010_REQ05_R61_OUT_MAXPS_HIGH1	0x05, 0x61
+#define TM6010_REQ05_R62_OUT_MAXPS_LOW2		0x05, 0x62
+#define TM6010_REQ05_R63_OUT_MAXPS_HIGH2	0x05, 0x63
+#define TM6010_REQ05_R64_OUT_MAXPS_LOW3		0x05, 0x64
+#define TM6010_REQ05_R65_OUT_MAXPS_HIGH3	0x05, 0x65
+#define TM6010_REQ05_R66_OUT_MAXPS_LOW4		0x05, 0x66
+#define TM6010_REQ05_R67_OUT_MAXPS_HIGH4	0x05, 0x67
+#define TM6010_REQ05_R68_OUT_MAXPS_LOW5		0x05, 0x68
+#define TM6010_REQ05_R69_OUT_MAXPS_HIGH5	0x05, 0x69
+#define TM6010_REQ05_R6A_OUT_MAXPS_LOW6		0x05, 0x6a
+#define TM6010_REQ05_R6B_OUT_MAXPS_HIGH6	0x05, 0x6b
+#define TM6010_REQ05_R6C_OUT_MAXPS_LOW7		0x05, 0x6c
+#define TM6010_REQ05_R6D_OUT_MAXPS_HIGH7	0x05, 0x6d
+#define TM6010_REQ05_R6E_OUT_MAXPS_LOW8		0x05, 0x6e
+#define TM6010_REQ05_R6F_OUT_MAXPS_HIGH8	0x05, 0x6f
+#define TM6010_REQ05_R70_OUT_MAXPS_LOW9		0x05, 0x70
+#define TM6010_REQ05_R71_OUT_MAXPS_HIGH9	0x05, 0x71
+#define TM6010_REQ05_R60_OUT_MAXPS_LOW10	0x05, 0x72
+#define TM6010_REQ05_R61_OUT_MAXPS_HIGH10	0x05, 0x73
+#define TM6010_REQ05_R60_OUT_MAXPS_LOW11	0x05, 0x74
+#define TM6010_REQ05_R61_OUT_MAXPS_HIGH11	0x05, 0x75
+#define TM6010_REQ05_R60_OUT_MAXPS_LOW12	0x05, 0x76
+#define TM6010_REQ05_R61_OUT_MAXPS_HIGH12	0x05, 0x77
+#define TM6010_REQ05_R60_OUT_MAXPS_LOW13	0x05, 0x78
+#define TM6010_REQ05_R61_OUT_MAXPS_HIGH13	0x05, 0x79
+#define TM6010_REQ05_R60_OUT_MAXPS_LOW14	0x05, 0x7a
+#define TM6010_REQ05_R61_OUT_MAXPS_HIGH14	0x05, 0x7b
+#define TM6010_REQ05_R60_OUT_MAXPS_LOW15	0x05, 0x7c
+#define TM6010_REQ05_R61_OUT_MAXPS_HIGH15	0x05, 0x7d
+#define TM6010_REQ05_R80_FIFO0			0x05, 0x80
+#define TM6010_REQ05_R81_FIFO1			0x05, 0x81
+#define TM6010_REQ05_R82_FIFO2			0x05, 0x82
+#define TM6010_REQ05_R83_FIFO3			0x05, 0x83
+#define TM6010_REQ05_R84_FIFO4			0x05, 0x84
+#define TM6010_REQ05_R85_FIFO5			0x05, 0x85
+#define TM6010_REQ05_R86_FIFO6			0x05, 0x86
+#define TM6010_REQ05_R87_FIFO7			0x05, 0x87
+#define TM6010_REQ05_R88_FIFO8			0x05, 0x88
+#define TM6010_REQ05_R89_FIFO9			0x05, 0x89
+#define TM6010_REQ05_R81_FIFO10			0x05, 0x8a
+#define TM6010_REQ05_R81_FIFO11			0x05, 0x8b
+#define TM6010_REQ05_R81_FIFO12			0x05, 0x8c
+#define TM6010_REQ05_R81_FIFO13			0x05, 0x8d
+#define TM6010_REQ05_R81_FIFO14			0x05, 0x8e
+#define TM6010_REQ05_R81_FIFO15			0x05, 0x8f
+#define TM6010_REQ05_R90_CFG_FIFO0		0x05, 0x90
+#define TM6010_REQ05_R91_CFG_FIFO1		0x05, 0x91
+#define TM6010_REQ05_R92_CFG_FIFO2		0x05, 0x92
+#define TM6010_REQ05_R93_CFG_FIFO3		0x05, 0x93
+#define TM6010_REQ05_R94_CFG_FIFO4		0x05, 0x94
+#define TM6010_REQ05_R95_CFG_FIFO5		0x05, 0x95
+#define TM6010_REQ05_R96_CFG_FIFO6		0x05, 0x96
+#define TM6010_REQ05_R97_CFG_FIFO7		0x05, 0x97
+#define TM6010_REQ05_R98_CFG_FIFO8		0x05, 0x98
+#define TM6010_REQ05_R99_CFG_FIFO9		0x05, 0x99
+#define TM6010_REQ05_R91_CFG_FIFO10		0x05, 0x9a
+#define TM6010_REQ05_R91_CFG_FIFO11		0x05, 0x9b
+#define TM6010_REQ05_R91_CFG_FIFO12		0x05, 0x9c
+#define TM6010_REQ05_R91_CFG_FIFO13		0x05, 0x9d
+#define TM6010_REQ05_R91_CFG_FIFO14		0x05, 0x9e
+#define TM6010_REQ05_R91_CFG_FIFO15		0x05, 0x9f
+#define TM6010_REQ05_RA0_CTL_FIFO0		0x05, 0xa0
+#define TM6010_REQ05_RA1_CTL_FIFO1		0x05, 0xa1
+#define TM6010_REQ05_RA2_CTL_FIFO2		0x05, 0xa2
+#define TM6010_REQ05_RA3_CTL_FIFO3		0x05, 0xa3
+#define TM6010_REQ05_RA4_CTL_FIFO4		0x05, 0xa4
+#define TM6010_REQ05_RA5_CTL_FIFO5		0x05, 0xa5
+#define TM6010_REQ05_RA6_CTL_FIFO6		0x05, 0xa6
+#define TM6010_REQ05_RA7_CTL_FIFO7		0x05, 0xa7
+#define TM6010_REQ05_RA8_CTL_FIFO8		0x05, 0xa8
+#define TM6010_REQ05_RA9_CTL_FIFO9		0x05, 0xa9
+#define TM6010_REQ05_RA1_CTL_FIFO10		0x05, 0xaa
+#define TM6010_REQ05_RA1_CTL_FIFO11		0x05, 0xab
+#define TM6010_REQ05_RA1_CTL_FIFO12		0x05, 0xac
+#define TM6010_REQ05_RA1_CTL_FIFO13		0x05, 0xad
+#define TM6010_REQ05_RA1_CTL_FIFO14		0x05, 0xae
+#define TM6010_REQ05_RA1_CTL_FIFO15		0x05, 0xaf
+#define TM6010_REQ05_RB0_BC_LOW_FIFO0		0x05, 0xb0
+#define TM6010_REQ05_RB1_BC_LOW_FIFO1		0x05, 0xb1
+#define TM6010_REQ05_RB2_BC_LOW_FIFO2		0x05, 0xb2
+#define TM6010_REQ05_RB3_BC_LOW_FIFO3		0x05, 0xb3
+#define TM6010_REQ05_RB4_BC_LOW_FIFO4		0x05, 0xb4
+#define TM6010_REQ05_RB5_BC_LOW_FIFO5		0x05, 0xb5
+#define TM6010_REQ05_RB6_BC_LOW_FIFO6		0x05, 0xb6
+#define TM6010_REQ05_RB7_BC_LOW_FIFO7		0x05, 0xb7
+#define TM6010_REQ05_RB8_BC_LOW_FIFO8		0x05, 0xb8
+#define TM6010_REQ05_RB9_BC_LOW_FIFO9		0x05, 0xb9
+#define TM6010_REQ05_RB1_BC_LOW_FIFO10		0x05, 0xba
+#define TM6010_REQ05_RB1_BC_LOW_FIFO11		0x05, 0xbb
+#define TM6010_REQ05_RB1_BC_LOW_FIFO12		0x05, 0xbc
+#define TM6010_REQ05_RB1_BC_LOW_FIFO13		0x05, 0xbd
+#define TM6010_REQ05_RB1_BC_LOW_FIFO14		0x05, 0xbe
+#define TM6010_REQ05_RB1_BC_LOW_FIFO15		0x05, 0xbf
+#define TM6010_REQ05_RC0_DATA_FIFO0		0x05, 0xc0
+#define TM6010_REQ05_RC4_DATA_FIFO1		0x05, 0xc4
+#define TM6010_REQ05_RC8_DATA_FIFO2		0x05, 0xc8
+#define TM6010_REQ05_RCC_DATA_FIFO3		0x05, 0xcc
+#define TM6010_REQ05_RD0_DATA_FIFO4		0x05, 0xd0
+#define TM6010_REQ05_RD4_DATA_FIFO5		0x05, 0xd4
+#define TM6010_REQ05_RD8_DATA_FIFO6		0x05, 0xd8
+#define TM6010_REQ05_RDC_DATA_FIFO7		0x05, 0xdc
+#define TM6010_REQ05_RE0_DATA_FIFO8		0x05, 0xe0
+#define TM6010_REQ05_RE4_DATA_FIFO9		0x05, 0xe4
+#define TM6010_REQ05_RC4_DATA_FIFO10		0x05, 0xe8
+#define TM6010_REQ05_RC4_DATA_FIFO11		0x05, 0xec
+#define TM6010_REQ05_RC4_DATA_FIFO12		0x05, 0xf0
+#define TM6010_REQ05_RC4_DATA_FIFO13		0x05, 0xf4
+#define TM6010_REQ05_RC4_DATA_FIFO14		0x05, 0xf8
+#define TM6010_REQ05_RC4_DATA_FIFO15		0x05, 0xfc
+
+/* Define TM6010 Audio decoder registers */
+/* This core available only in TM6010 */
+#define TM6010_REQ08_R00_A_VERSION		0x08, 0x00
+#define TM6010_REQ08_R01_A_INIT			0x08, 0x01
+#define TM6010_REQ08_R02_A_FIX_GAIN_CTRL	0x08, 0x02
+#define TM6010_REQ08_R03_A_AUTO_GAIN_CTRL	0x08, 0x03
+#define TM6010_REQ08_R04_A_SIF_AMP_CTRL		0x08, 0x04
+#define TM6010_REQ08_R05_A_STANDARD_MOD		0x08, 0x05
+#define TM6010_REQ08_R06_A_SOUND_MOD		0x08, 0x06
+#define TM6010_REQ08_R07_A_LEFT_VOL		0x08, 0x07
+#define TM6010_REQ08_R08_A_RIGHT_VOL		0x08, 0x08
+#define TM6010_REQ08_R09_A_MAIN_VOL		0x08, 0x09
+#define TM6010_REQ08_R0A_A_I2S_MOD		0x08, 0x0a
+#define TM6010_REQ08_R0B_A_ASD_THRES1		0x08, 0x0b
+#define TM6010_REQ08_R0C_A_ASD_THRES2		0x08, 0x0c
+#define TM6010_REQ08_R0D_A_AMD_THRES		0x08, 0x0d
+#define TM6010_REQ08_R0E_A_MONO_THRES1		0x08, 0x0e
+#define TM6010_REQ08_R0F_A_MONO_THRES2		0x08, 0x0f
+#define TM6010_REQ08_R10_A_MUTE_THRES1		0x08, 0x10
+#define TM6010_REQ08_R11_A_MUTE_THRES2		0x08, 0x11
+#define TM6010_REQ08_R12_A_AGC_U		0x08, 0x12
+#define TM6010_REQ08_R13_A_AGC_ERR_T		0x08, 0x13
+#define TM6010_REQ08_R14_A_AGC_GAIN_INIT	0x08, 0x14
+#define TM6010_REQ08_R15_A_AGC_STEP_THR		0x08, 0x15
+#define TM6010_REQ08_R16_A_AGC_GAIN_MAX		0x08, 0x16
+#define TM6010_REQ08_R17_A_AGC_GAIN_MIN		0x08, 0x17
+#define TM6010_REQ08_R18_A_TR_CTRL		0x08, 0x18
+#define TM6010_REQ08_R19_A_FH_2FH_GAIN		0x08, 0x19
+#define TM6010_REQ08_R1A_A_NICAM_SER_MAX	0x08, 0x1a
+#define TM6010_REQ08_R1B_A_NICAM_SER_MIN	0x08, 0x1b
+#define TM6010_REQ08_R1E_A_GAIN_DEEMPH_OUT	0x08, 0x1e
+#define TM6010_REQ08_R1F_A_TEST_INTF_SEL	0x08, 0x1f
+#define TM6010_REQ08_R20_A_TEST_PIN_SEL		0x08, 0x20
+#define TM6010_REQ08_R21_A_AGC_ERR		0x08, 0x21
+#define TM6010_REQ08_R22_A_AGC_GAIN		0x08, 0x22
+#define TM6010_REQ08_R23_A_NICAM_INFO		0x08, 0x23
+#define TM6010_REQ08_R24_A_SER			0x08, 0x24
+#define TM6010_REQ08_R25_A_C1_AMP		0x08, 0x25
+#define TM6010_REQ08_R26_A_C2_AMP		0x08, 0x26
+#define TM6010_REQ08_R27_A_NOISE_AMP		0x08, 0x27
+#define TM6010_REQ08_R28_A_AUDIO_MODE_RES	0x08, 0x28
+
+/* Define TM6010 Video ADC registers */
+#define TM6010_REQ08_RE0_ADC_REF		0x08, 0xe0
+#define TM6010_REQ08_RE1_DAC_CLMP		0x08, 0xe1
+#define TM6010_REQ08_RE2_POWER_DOWN_CTRL1	0x08, 0xe2
+#define TM6010_REQ08_RE3_ADC_IN1_SEL		0x08, 0xe3
+#define TM6010_REQ08_RE4_ADC_IN2_SEL		0x08, 0xe4
+#define TM6010_REQ08_RE5_GAIN_PARAM		0x08, 0xe5
+#define TM6010_REQ08_RE6_POWER_DOWN_CTRL2	0x08, 0xe6
+#define TM6010_REQ08_RE7_REG_GAIN_Y		0x08, 0xe7
+#define TM6010_REQ08_RE8_REG_GAIN_C		0x08, 0xe8
+#define TM6010_REQ08_RE9_BIAS_CTRL		0x08, 0xe9
+#define TM6010_REQ08_REA_BUFF_DRV_CTRL		0x08, 0xea
+#define TM6010_REQ08_REB_SIF_GAIN_CTRL		0x08, 0xeb
+#define TM6010_REQ08_REC_REVERSE_YC_CTRL	0x08, 0xec
+#define TM6010_REQ08_RED_GAIN_SEL		0x08, 0xed
+
+/* Define TM6010 Audio ADC registers */
+#define TM6010_REQ08_RF0_DAUDIO_INPUT_CONFIG	0x08, 0xf0
+#define TM6010_REQ08_RF1_AADC_POWER_DOWN	0x08, 0xf1
+#define TM6010_REQ08_RF2_LEFT_CHANNEL_VOL	0x08, 0xf2
+#define TM6010_REQ08_RF3_RIGHT_CHANNEL_VOL	0x08, 0xf3
diff --git a/kernel/drivers/media/usb/tm6000/tm6000-stds.c b/kernel/drivers/media/usb/tm6000/tm6000-stds.c
new file mode 100644
index 000000000..93a4b2434
--- /dev/null
+++ b/kernel/drivers/media/usb/tm6000/tm6000-stds.c
@@ -0,0 +1,638 @@
+/*
+ *  tm6000-stds.c - driver for TM5600/TM6000/TM6010 USB video capture devices
+ *
+ *  Copyright (C) 2007 Mauro Carvalho Chehab
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation version 2
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include "tm6000.h"
+#include "tm6000-regs.h"
+
+static unsigned int tm6010_a_mode;
+module_param(tm6010_a_mode, int, 0644);
+MODULE_PARM_DESC(tm6010_a_mode, "set tm6010 sif audio mode");
+
+struct tm6000_reg_settings {
+	unsigned char req;
+	unsigned char reg;
+	unsigned char value;
+};
+
+
+struct tm6000_std_settings {
+	v4l2_std_id id;
+	struct tm6000_reg_settings *common;
+};
+
+static struct tm6000_reg_settings composite_pal_m[] = {
+	{ TM6010_REQ07_R3F_RESET, 0x01 },
+	{ TM6010_REQ07_R00_VIDEO_CONTROL0, 0x04 },
+	{ TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0e },
+	{ TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f },
+	{ TM6010_REQ07_R03_YC_SEP_CONTROL, 0x00 },
+	{ TM6010_REQ07_R07_OUTPUT_CONTROL, 0x31 },
+	{ TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x1e },
+	{ TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x83 },
+	{ TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0x0a },
+	{ TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0xe0 },
+	{ TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c },
+	{ TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc },
+	{ TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc },
+	{ TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd },
+	{ TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x88 },
+	{ TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x20 },
+	{ TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0x61 },
+	{ TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x0c },
+	{ TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x1c },
+	{ TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x52 },
+	{ TM6010_REQ07_R83_CHROMA_LOCK_CONFIG, 0x6f },
+	{ TM6010_REQ07_R04_LUMA_HAGC_CONTROL, 0xdc },
+	{ TM6010_REQ07_R0D_CHROMA_KILL_LEVEL, 0x07 },
+	{ TM6010_REQ07_R3F_RESET, 0x00 },
+	{ 0, 0, 0 }
+};
+
+static struct tm6000_reg_settings composite_pal_nc[] = {
+	{ TM6010_REQ07_R3F_RESET, 0x01 },
+	{ TM6010_REQ07_R00_VIDEO_CONTROL0, 0x36 },
+	{ TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0e },
+	{ TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f },
+	{ TM6010_REQ07_R03_YC_SEP_CONTROL, 0x02 },
+	{ TM6010_REQ07_R07_OUTPUT_CONTROL, 0x31 },
+	{ TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x1e },
+	{ TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x91 },
+	{ TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0x1f },
+	{ TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0x0c },
+	{ TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c },
+	{ TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc },
+	{ TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc },
+	{ TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd },
+	{ TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x8c },
+	{ TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x2c },
+	{ TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0xc1 },
+	{ TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x0c },
+	{ TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x1c },
+	{ TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x52 },
+	{ TM6010_REQ07_R83_CHROMA_LOCK_CONFIG, 0x6f },
+	{ TM6010_REQ07_R04_LUMA_HAGC_CONTROL, 0xdc },
+	{ TM6010_REQ07_R0D_CHROMA_KILL_LEVEL, 0x07 },
+	{ TM6010_REQ07_R3F_RESET, 0x00 },
+	{ 0, 0, 0 }
+};
+
+static struct tm6000_reg_settings composite_pal[] = {
+	{ TM6010_REQ07_R3F_RESET, 0x01 },
+	{ TM6010_REQ07_R00_VIDEO_CONTROL0, 0x32 },
+	{ TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0e },
+	{ TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f },
+	{ TM6010_REQ07_R03_YC_SEP_CONTROL, 0x02 },
+	{ TM6010_REQ07_R07_OUTPUT_CONTROL, 0x31 },
+	{ TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x25 },
+	{ TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0xd5 },
+	{ TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0x63 },
+	{ TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0x50 },
+	{ TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c },
+	{ TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc },
+	{ TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc },
+	{ TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd },
+	{ TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x8c },
+	{ TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x2c },
+	{ TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0xc1 },
+	{ TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x0c },
+	{ TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x1c },
+	{ TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x52 },
+	{ TM6010_REQ07_R83_CHROMA_LOCK_CONFIG, 0x6f },
+	{ TM6010_REQ07_R04_LUMA_HAGC_CONTROL, 0xdc },
+	{ TM6010_REQ07_R0D_CHROMA_KILL_LEVEL, 0x07 },
+	{ TM6010_REQ07_R3F_RESET, 0x00 },
+	{ 0, 0, 0 }
+};
+
+static struct tm6000_reg_settings composite_secam[] = {
+	{ TM6010_REQ07_R3F_RESET, 0x01 },
+	{ TM6010_REQ07_R00_VIDEO_CONTROL0, 0x38 },
+	{ TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0e },
+	{ TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f },
+	{ TM6010_REQ07_R03_YC_SEP_CONTROL, 0x02 },
+	{ TM6010_REQ07_R07_OUTPUT_CONTROL, 0x31 },
+	{ TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x24 },
+	{ TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x92 },
+	{ TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0xe8 },
+	{ TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0xed },
+	{ TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c },
+	{ TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc },
+	{ TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc },
+	{ TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd },
+	{ TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x8c },
+	{ TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x2c },
+	{ TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0xc1 },
+	{ TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x2c },
+	{ TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x18 },
+	{ TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x42 },
+	{ TM6010_REQ07_R83_CHROMA_LOCK_CONFIG, 0xff },
+	{ TM6010_REQ07_R0D_CHROMA_KILL_LEVEL, 0x07 },
+	{ TM6010_REQ07_R3F_RESET, 0x00 },
+	{ 0, 0, 0 }
+};
+
+static struct tm6000_reg_settings composite_ntsc[] = {
+	{ TM6010_REQ07_R3F_RESET, 0x01 },
+	{ TM6010_REQ07_R00_VIDEO_CONTROL0, 0x00 },
+	{ TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0f },
+	{ TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f },
+	{ TM6010_REQ07_R03_YC_SEP_CONTROL, 0x00 },
+	{ TM6010_REQ07_R07_OUTPUT_CONTROL, 0x31 },
+	{ TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x1e },
+	{ TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x8b },
+	{ TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0xa2 },
+	{ TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0xe9 },
+	{ TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c },
+	{ TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc },
+	{ TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc },
+	{ TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd },
+	{ TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x88 },
+	{ TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x22 },
+	{ TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0x61 },
+	{ TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x1c },
+	{ TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x1c },
+	{ TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x42 },
+	{ TM6010_REQ07_R83_CHROMA_LOCK_CONFIG, 0x6f },
+	{ TM6010_REQ07_R04_LUMA_HAGC_CONTROL, 0xdd },
+	{ TM6010_REQ07_R0D_CHROMA_KILL_LEVEL, 0x07 },
+	{ TM6010_REQ07_R3F_RESET, 0x00 },
+	{ 0, 0, 0 }
+};
+
+static struct tm6000_std_settings composite_stds[] = {
+	{ .id = V4L2_STD_PAL_M, .common = composite_pal_m, },
+	{ .id = V4L2_STD_PAL_Nc, .common = composite_pal_nc, },
+	{ .id = V4L2_STD_PAL, .common = composite_pal, },
+	{ .id = V4L2_STD_SECAM, .common = composite_secam, },
+	{ .id = V4L2_STD_NTSC, .common = composite_ntsc, },
+};
+
+static struct tm6000_reg_settings svideo_pal_m[] = {
+	{ TM6010_REQ07_R3F_RESET, 0x01 },
+	{ TM6010_REQ07_R00_VIDEO_CONTROL0, 0x05 },
+	{ TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0e },
+	{ TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f },
+	{ TM6010_REQ07_R03_YC_SEP_CONTROL, 0x04 },
+	{ TM6010_REQ07_R07_OUTPUT_CONTROL, 0x31 },
+	{ TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x1e },
+	{ TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x83 },
+	{ TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0x0a },
+	{ TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0xe0 },
+	{ TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c },
+	{ TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc },
+	{ TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc },
+	{ TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd },
+	{ TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x88 },
+	{ TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x22 },
+	{ TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0x61 },
+	{ TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x0c },
+	{ TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x1c },
+	{ TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x52 },
+	{ TM6010_REQ07_R83_CHROMA_LOCK_CONFIG, 0x6f },
+	{ TM6010_REQ07_R04_LUMA_HAGC_CONTROL, 0xdc },
+	{ TM6010_REQ07_R0D_CHROMA_KILL_LEVEL, 0x07 },
+	{ TM6010_REQ07_R3F_RESET, 0x00 },
+	{ 0, 0, 0 }
+};
+
+static struct tm6000_reg_settings svideo_pal_nc[] = {
+	{ TM6010_REQ07_R3F_RESET, 0x01 },
+	{ TM6010_REQ07_R00_VIDEO_CONTROL0, 0x37 },
+	{ TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0e },
+	{ TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f },
+	{ TM6010_REQ07_R03_YC_SEP_CONTROL, 0x04 },
+	{ TM6010_REQ07_R07_OUTPUT_CONTROL, 0x31 },
+	{ TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x1e },
+	{ TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x91 },
+	{ TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0x1f },
+	{ TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0x0c },
+	{ TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c },
+	{ TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc },
+	{ TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc },
+	{ TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd },
+	{ TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x88 },
+	{ TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x22 },
+	{ TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0xc1 },
+	{ TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x0c },
+	{ TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x1c },
+	{ TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x52 },
+	{ TM6010_REQ07_R83_CHROMA_LOCK_CONFIG, 0x6f },
+	{ TM6010_REQ07_R04_LUMA_HAGC_CONTROL, 0xdc },
+	{ TM6010_REQ07_R0D_CHROMA_KILL_LEVEL, 0x07 },
+	{ TM6010_REQ07_R3F_RESET, 0x00 },
+	{ 0, 0, 0 }
+};
+
+static struct tm6000_reg_settings svideo_pal[] = {
+	{ TM6010_REQ07_R3F_RESET, 0x01 },
+	{ TM6010_REQ07_R00_VIDEO_CONTROL0, 0x33 },
+	{ TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0e },
+	{ TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f },
+	{ TM6010_REQ07_R03_YC_SEP_CONTROL, 0x04 },
+	{ TM6010_REQ07_R07_OUTPUT_CONTROL, 0x30 },
+	{ TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x25 },
+	{ TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0xd5 },
+	{ TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0x63 },
+	{ TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0x50 },
+	{ TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c },
+	{ TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc },
+	{ TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc },
+	{ TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd },
+	{ TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x8c },
+	{ TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x2a },
+	{ TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0xc1 },
+	{ TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x0c },
+	{ TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x1c },
+	{ TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x52 },
+	{ TM6010_REQ07_R83_CHROMA_LOCK_CONFIG, 0x6f },
+	{ TM6010_REQ07_R04_LUMA_HAGC_CONTROL, 0xdc },
+	{ TM6010_REQ07_R0D_CHROMA_KILL_LEVEL, 0x07 },
+	{ TM6010_REQ07_R3F_RESET, 0x00 },
+	{ 0, 0, 0 }
+};
+
+static struct tm6000_reg_settings svideo_secam[] = {
+	{ TM6010_REQ07_R3F_RESET, 0x01 },
+	{ TM6010_REQ07_R00_VIDEO_CONTROL0, 0x39 },
+	{ TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0e },
+	{ TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f },
+	{ TM6010_REQ07_R03_YC_SEP_CONTROL, 0x03 },
+	{ TM6010_REQ07_R07_OUTPUT_CONTROL, 0x31 },
+	{ TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x24 },
+	{ TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x92 },
+	{ TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0xe8 },
+	{ TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0xed },
+	{ TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c },
+	{ TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc },
+	{ TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc },
+	{ TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd },
+	{ TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x8c },
+	{ TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x2a },
+	{ TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0xc1 },
+	{ TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x2c },
+	{ TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x18 },
+	{ TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x42 },
+	{ TM6010_REQ07_R83_CHROMA_LOCK_CONFIG, 0xff },
+	{ TM6010_REQ07_R0D_CHROMA_KILL_LEVEL, 0x07 },
+	{ TM6010_REQ07_R3F_RESET, 0x00 },
+	{ 0, 0, 0 }
+};
+
+static struct tm6000_reg_settings svideo_ntsc[] = {
+	{ TM6010_REQ07_R3F_RESET, 0x01 },
+	{ TM6010_REQ07_R00_VIDEO_CONTROL0, 0x01 },
+	{ TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0f },
+	{ TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f },
+	{ TM6010_REQ07_R03_YC_SEP_CONTROL, 0x03 },
+	{ TM6010_REQ07_R07_OUTPUT_CONTROL, 0x30 },
+	{ TM6010_REQ07_R17_HLOOP_MAXSTATE, 0x8b },
+	{ TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x1e },
+	{ TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x8b },
+	{ TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0xa2 },
+	{ TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0xe9 },
+	{ TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c },
+	{ TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc },
+	{ TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc },
+	{ TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd },
+	{ TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x88 },
+	{ TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x22 },
+	{ TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0x61 },
+	{ TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x1c },
+	{ TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x1c },
+	{ TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x42 },
+	{ TM6010_REQ07_R83_CHROMA_LOCK_CONFIG, 0x6f },
+	{ TM6010_REQ07_R04_LUMA_HAGC_CONTROL, 0xdd },
+	{ TM6010_REQ07_R0D_CHROMA_KILL_LEVEL, 0x07 },
+	{ TM6010_REQ07_R3F_RESET, 0x00 },
+	{ 0, 0, 0 }
+};
+
+static struct tm6000_std_settings svideo_stds[] = {
+	{ .id = V4L2_STD_PAL_M, .common = svideo_pal_m, },
+	{ .id = V4L2_STD_PAL_Nc, .common = svideo_pal_nc, },
+	{ .id = V4L2_STD_PAL, .common = svideo_pal, },
+	{ .id = V4L2_STD_SECAM, .common = svideo_secam, },
+	{ .id = V4L2_STD_NTSC, .common = svideo_ntsc, },
+};
+
+static int tm6000_set_audio_std(struct tm6000_core *dev)
+{
+	uint8_t areg_02 = 0x04; /* GC1 Fixed gain 0dB */
+	uint8_t areg_05 = 0x01; /* Auto 4.5 = M Japan, Auto 6.5 = DK */
+	uint8_t areg_06 = 0x02; /* Auto de-emphasis, mannual channel mode */
+
+	if (dev->radio) {
+		tm6000_set_reg(dev, TM6010_REQ08_R01_A_INIT, 0x00);
+		tm6000_set_reg(dev, TM6010_REQ08_R02_A_FIX_GAIN_CTRL, 0x04);
+		tm6000_set_reg(dev, TM6010_REQ08_R03_A_AUTO_GAIN_CTRL, 0x00);
+		tm6000_set_reg(dev, TM6010_REQ08_R04_A_SIF_AMP_CTRL, 0x80);
+		tm6000_set_reg(dev, TM6010_REQ08_R05_A_STANDARD_MOD, 0x0c);
+		/* set mono or stereo */
+		if (dev->amode == V4L2_TUNER_MODE_MONO)
+			tm6000_set_reg(dev, TM6010_REQ08_R06_A_SOUND_MOD, 0x00);
+		else if (dev->amode == V4L2_TUNER_MODE_STEREO)
+			tm6000_set_reg(dev, TM6010_REQ08_R06_A_SOUND_MOD, 0x02);
+		tm6000_set_reg(dev, TM6010_REQ08_R09_A_MAIN_VOL, 0x18);
+		tm6000_set_reg(dev, TM6010_REQ08_R0C_A_ASD_THRES2, 0x0a);
+		tm6000_set_reg(dev, TM6010_REQ08_R0D_A_AMD_THRES, 0x40);
+		tm6000_set_reg(dev, TM6010_REQ08_RF1_AADC_POWER_DOWN, 0xfe);
+		tm6000_set_reg(dev, TM6010_REQ08_R1E_A_GAIN_DEEMPH_OUT, 0x13);
+		tm6000_set_reg(dev, TM6010_REQ08_R01_A_INIT, 0x80);
+		tm6000_set_reg(dev, TM6010_REQ07_RFE_POWER_DOWN, 0xff);
+		return 0;
+	}
+
+	/*
+	 * STD/MN shouldn't be affected by tm6010_a_mode, as there's just one
+	 * audio standard for each V4L2_STD type.
+	 */
+	if ((dev->norm & V4L2_STD_NTSC) == V4L2_STD_NTSC_M_KR) {
+		areg_05 |= 0x04;
+	} else if ((dev->norm & V4L2_STD_NTSC) == V4L2_STD_NTSC_M_JP) {
+		areg_05 |= 0x43;
+	} else if (dev->norm & V4L2_STD_MN) {
+		areg_05 |= 0x22;
+	} else switch (tm6010_a_mode) {
+	/* auto */
+	case 0:
+		if ((dev->norm & V4L2_STD_SECAM) == V4L2_STD_SECAM_L)
+			areg_05 |= 0x00;
+		else	/* Other PAL/SECAM standards */
+			areg_05 |= 0x10;
+		break;
+	/* A2 */
+	case 1:
+		if (dev->norm & V4L2_STD_DK)
+			areg_05 = 0x09;
+		else
+			areg_05 = 0x05;
+		break;
+	/* NICAM */
+	case 2:
+		if (dev->norm & V4L2_STD_DK) {
+			areg_05 = 0x06;
+		} else if (dev->norm & V4L2_STD_PAL_I) {
+			areg_05 = 0x08;
+		} else if (dev->norm & V4L2_STD_SECAM_L) {
+			areg_05 = 0x0a;
+			areg_02 = 0x02;
+		} else {
+			areg_05 = 0x07;
+		}
+		break;
+	/* other */
+	case 3:
+		if (dev->norm & V4L2_STD_DK) {
+			areg_05 = 0x0b;
+		} else {
+			areg_05 = 0x02;
+		}
+		break;
+	}
+
+	tm6000_set_reg(dev, TM6010_REQ08_R01_A_INIT, 0x00);
+	tm6000_set_reg(dev, TM6010_REQ08_R02_A_FIX_GAIN_CTRL, areg_02);
+	tm6000_set_reg(dev, TM6010_REQ08_R03_A_AUTO_GAIN_CTRL, 0x00);
+	tm6000_set_reg(dev, TM6010_REQ08_R04_A_SIF_AMP_CTRL, 0xa0);
+	tm6000_set_reg(dev, TM6010_REQ08_R05_A_STANDARD_MOD, areg_05);
+	tm6000_set_reg(dev, TM6010_REQ08_R06_A_SOUND_MOD, areg_06);
+	tm6000_set_reg(dev, TM6010_REQ08_R07_A_LEFT_VOL, 0x00);
+	tm6000_set_reg(dev, TM6010_REQ08_R08_A_RIGHT_VOL, 0x00);
+	tm6000_set_reg(dev, TM6010_REQ08_R09_A_MAIN_VOL, 0x08);
+	tm6000_set_reg(dev, TM6010_REQ08_R0A_A_I2S_MOD, 0x91);
+	tm6000_set_reg(dev, TM6010_REQ08_R0B_A_ASD_THRES1, 0x20);
+	tm6000_set_reg(dev, TM6010_REQ08_R0C_A_ASD_THRES2, 0x12);
+	tm6000_set_reg(dev, TM6010_REQ08_R0D_A_AMD_THRES, 0x20);
+	tm6000_set_reg(dev, TM6010_REQ08_R0E_A_MONO_THRES1, 0xf0);
+	tm6000_set_reg(dev, TM6010_REQ08_R0F_A_MONO_THRES2, 0x80);
+	tm6000_set_reg(dev, TM6010_REQ08_R10_A_MUTE_THRES1, 0xc0);
+	tm6000_set_reg(dev, TM6010_REQ08_R11_A_MUTE_THRES2, 0x80);
+	tm6000_set_reg(dev, TM6010_REQ08_R12_A_AGC_U, 0x12);
+	tm6000_set_reg(dev, TM6010_REQ08_R13_A_AGC_ERR_T, 0xfe);
+	tm6000_set_reg(dev, TM6010_REQ08_R14_A_AGC_GAIN_INIT, 0x20);
+	tm6000_set_reg(dev, TM6010_REQ08_R15_A_AGC_STEP_THR, 0x14);
+	tm6000_set_reg(dev, TM6010_REQ08_R16_A_AGC_GAIN_MAX, 0xfe);
+	tm6000_set_reg(dev, TM6010_REQ08_R17_A_AGC_GAIN_MIN, 0x01);
+	tm6000_set_reg(dev, TM6010_REQ08_R18_A_TR_CTRL, 0xa0);
+	tm6000_set_reg(dev, TM6010_REQ08_R19_A_FH_2FH_GAIN, 0x32);
+	tm6000_set_reg(dev, TM6010_REQ08_R1A_A_NICAM_SER_MAX, 0x64);
+	tm6000_set_reg(dev, TM6010_REQ08_R1B_A_NICAM_SER_MIN, 0x20);
+	tm6000_set_reg(dev, REQ_08_SET_GET_AVREG_BIT, 0x1c, 0x00);
+	tm6000_set_reg(dev, REQ_08_SET_GET_AVREG_BIT, 0x1d, 0x00);
+	tm6000_set_reg(dev, TM6010_REQ08_R1E_A_GAIN_DEEMPH_OUT, 0x13);
+	tm6000_set_reg(dev, TM6010_REQ08_R1F_A_TEST_INTF_SEL, 0x00);
+	tm6000_set_reg(dev, TM6010_REQ08_R20_A_TEST_PIN_SEL, 0x00);
+	tm6000_set_reg(dev, TM6010_REQ08_R01_A_INIT, 0x80);
+
+	return 0;
+}
+
+void tm6000_get_std_res(struct tm6000_core *dev)
+{
+	/* Currently, those are the only supported resoltions */
+	if (dev->norm & V4L2_STD_525_60)
+		dev->height = 480;
+	else
+		dev->height = 576;
+
+	dev->width = 720;
+}
+
+static int tm6000_load_std(struct tm6000_core *dev, struct tm6000_reg_settings *set)
+{
+	int i, rc;
+
+	/* Load board's initialization table */
+	for (i = 0; set[i].req; i++) {
+		rc = tm6000_set_reg(dev, set[i].req, set[i].reg, set[i].value);
+		if (rc < 0) {
+			printk(KERN_ERR "Error %i while setting "
+			       "req %d, reg %d to value %d\n",
+			       rc, set[i].req, set[i].reg, set[i].value);
+			return rc;
+		}
+	}
+
+	return 0;
+}
+
+int tm6000_set_standard(struct tm6000_core *dev)
+{
+	struct tm6000_input *input;
+	int i, rc = 0;
+	u8 reg_07_fe = 0x8a;
+	u8 reg_08_f1 = 0xfc;
+	u8 reg_08_e2 = 0xf0;
+	u8 reg_08_e6 = 0x0f;
+
+	tm6000_get_std_res(dev);
+
+	if (!dev->radio)
+		input = &dev->vinput[dev->input];
+	else
+		input = &dev->rinput;
+
+	if (dev->dev_type == TM6010) {
+		switch (input->vmux) {
+		case TM6000_VMUX_VIDEO_A:
+			tm6000_set_reg(dev, TM6010_REQ08_RE3_ADC_IN1_SEL, 0xf4);
+			tm6000_set_reg(dev, TM6010_REQ08_REA_BUFF_DRV_CTRL, 0xf1);
+			tm6000_set_reg(dev, TM6010_REQ08_REB_SIF_GAIN_CTRL, 0xe0);
+			tm6000_set_reg(dev, TM6010_REQ08_REC_REVERSE_YC_CTRL, 0xc2);
+			tm6000_set_reg(dev, TM6010_REQ08_RED_GAIN_SEL, 0xe8);
+			reg_07_fe |= 0x01;
+			break;
+		case TM6000_VMUX_VIDEO_B:
+			tm6000_set_reg(dev, TM6010_REQ08_RE3_ADC_IN1_SEL, 0xf8);
+			tm6000_set_reg(dev, TM6010_REQ08_REA_BUFF_DRV_CTRL, 0xf1);
+			tm6000_set_reg(dev, TM6010_REQ08_REB_SIF_GAIN_CTRL, 0xe0);
+			tm6000_set_reg(dev, TM6010_REQ08_REC_REVERSE_YC_CTRL, 0xc2);
+			tm6000_set_reg(dev, TM6010_REQ08_RED_GAIN_SEL, 0xe8);
+			reg_07_fe |= 0x01;
+			break;
+		case TM6000_VMUX_VIDEO_AB:
+			tm6000_set_reg(dev, TM6010_REQ08_RE3_ADC_IN1_SEL, 0xfc);
+			tm6000_set_reg(dev, TM6010_REQ08_RE4_ADC_IN2_SEL, 0xf8);
+			reg_08_e6 = 0x00;
+			tm6000_set_reg(dev, TM6010_REQ08_REA_BUFF_DRV_CTRL, 0xf2);
+			tm6000_set_reg(dev, TM6010_REQ08_REB_SIF_GAIN_CTRL, 0xf0);
+			tm6000_set_reg(dev, TM6010_REQ08_REC_REVERSE_YC_CTRL, 0xc2);
+			tm6000_set_reg(dev, TM6010_REQ08_RED_GAIN_SEL, 0xe0);
+			break;
+		default:
+			break;
+		}
+		switch (input->amux) {
+		case TM6000_AMUX_ADC1:
+			tm6000_set_reg_mask(dev, TM6010_REQ08_RF0_DAUDIO_INPUT_CONFIG,
+				0x00, 0x0f);
+			/* Mux overflow workaround */
+			tm6000_set_reg_mask(dev, TM6010_REQ07_R07_OUTPUT_CONTROL,
+				0x10, 0xf0);
+			break;
+		case TM6000_AMUX_ADC2:
+			tm6000_set_reg_mask(dev, TM6010_REQ08_RF0_DAUDIO_INPUT_CONFIG,
+				0x08, 0x0f);
+			/* Mux overflow workaround */
+			tm6000_set_reg_mask(dev, TM6010_REQ07_R07_OUTPUT_CONTROL,
+				0x10, 0xf0);
+			break;
+		case TM6000_AMUX_SIF1:
+			reg_08_e2 |= 0x02;
+			reg_08_e6 = 0x08;
+			reg_07_fe |= 0x40;
+			reg_08_f1 |= 0x02;
+			tm6000_set_reg(dev, TM6010_REQ08_RE4_ADC_IN2_SEL, 0xf3);
+			tm6000_set_reg_mask(dev, TM6010_REQ08_RF0_DAUDIO_INPUT_CONFIG,
+				0x02, 0x0f);
+			/* Mux overflow workaround */
+			tm6000_set_reg_mask(dev, TM6010_REQ07_R07_OUTPUT_CONTROL,
+				0x30, 0xf0);
+			break;
+		case TM6000_AMUX_SIF2:
+			reg_08_e2 |= 0x02;
+			reg_08_e6 = 0x08;
+			reg_07_fe |= 0x40;
+			reg_08_f1 |= 0x02;
+			tm6000_set_reg(dev, TM6010_REQ08_RE4_ADC_IN2_SEL, 0xf7);
+			tm6000_set_reg_mask(dev, TM6010_REQ08_RF0_DAUDIO_INPUT_CONFIG,
+				0x02, 0x0f);
+			/* Mux overflow workaround */
+			tm6000_set_reg_mask(dev, TM6010_REQ07_R07_OUTPUT_CONTROL,
+				0x30, 0xf0);
+			break;
+		default:
+			break;
+		}
+		tm6000_set_reg(dev, TM6010_REQ08_RE2_POWER_DOWN_CTRL1, reg_08_e2);
+		tm6000_set_reg(dev, TM6010_REQ08_RE6_POWER_DOWN_CTRL2, reg_08_e6);
+		tm6000_set_reg(dev, TM6010_REQ08_RF1_AADC_POWER_DOWN, reg_08_f1);
+		tm6000_set_reg(dev, TM6010_REQ07_RFE_POWER_DOWN, reg_07_fe);
+	} else {
+		switch (input->vmux) {
+		case TM6000_VMUX_VIDEO_A:
+			tm6000_set_reg(dev, TM6000_REQ07_RE3_VADC_INP_LPF_SEL1, 0x10);
+			tm6000_set_reg(dev, TM6000_REQ07_RE5_VADC_INP_LPF_SEL2, 0x00);
+			tm6000_set_reg(dev, TM6000_REQ07_RE8_VADC_PWDOWN_CTL, 0x0f);
+			tm6000_set_reg(dev,
+			    REQ_03_SET_GET_MCU_PIN, input->v_gpio, 0);
+			break;
+		case TM6000_VMUX_VIDEO_B:
+			tm6000_set_reg(dev, TM6000_REQ07_RE3_VADC_INP_LPF_SEL1, 0x00);
+			tm6000_set_reg(dev, TM6000_REQ07_RE5_VADC_INP_LPF_SEL2, 0x00);
+			tm6000_set_reg(dev, TM6000_REQ07_RE8_VADC_PWDOWN_CTL, 0x0f);
+			tm6000_set_reg(dev,
+			    REQ_03_SET_GET_MCU_PIN, input->v_gpio, 0);
+			break;
+		case TM6000_VMUX_VIDEO_AB:
+			tm6000_set_reg(dev, TM6000_REQ07_RE3_VADC_INP_LPF_SEL1, 0x10);
+			tm6000_set_reg(dev, TM6000_REQ07_RE5_VADC_INP_LPF_SEL2, 0x10);
+			tm6000_set_reg(dev, TM6000_REQ07_RE8_VADC_PWDOWN_CTL, 0x00);
+			tm6000_set_reg(dev,
+			    REQ_03_SET_GET_MCU_PIN, input->v_gpio, 1);
+			break;
+		default:
+			break;
+		}
+		switch (input->amux) {
+		case TM6000_AMUX_ADC1:
+			tm6000_set_reg_mask(dev,
+				TM6000_REQ07_REB_VADC_AADC_MODE, 0x00, 0x0f);
+			break;
+		case TM6000_AMUX_ADC2:
+			tm6000_set_reg_mask(dev,
+				TM6000_REQ07_REB_VADC_AADC_MODE, 0x04, 0x0f);
+			break;
+		default:
+			break;
+		}
+	}
+	if (input->type == TM6000_INPUT_SVIDEO) {
+		for (i = 0; i < ARRAY_SIZE(svideo_stds); i++) {
+			if (dev->norm & svideo_stds[i].id) {
+				rc = tm6000_load_std(dev, svideo_stds[i].common);
+				goto ret;
+			}
+		}
+		return -EINVAL;
+	} else {
+		for (i = 0; i < ARRAY_SIZE(composite_stds); i++) {
+			if (dev->norm & composite_stds[i].id) {
+				rc = tm6000_load_std(dev, composite_stds[i].common);
+				goto ret;
+			}
+		}
+		return -EINVAL;
+	}
+
+ret:
+	if (rc < 0)
+		return rc;
+
+	if ((dev->dev_type == TM6010) &&
+	    ((input->amux == TM6000_AMUX_SIF1) ||
+	    (input->amux == TM6000_AMUX_SIF2)))
+		tm6000_set_audio_std(dev);
+
+	msleep(40);
+
+	return 0;
+}
diff --git a/kernel/drivers/media/usb/tm6000/tm6000-usb-isoc.h b/kernel/drivers/media/usb/tm6000/tm6000-usb-isoc.h
new file mode 100644
index 000000000..99d15a55a
--- /dev/null
+++ b/kernel/drivers/media/usb/tm6000/tm6000-usb-isoc.h
@@ -0,0 +1,50 @@
+/*
+ *  tm6000-buf.c - driver for TM5600/TM6000/TM6010 USB video capture devices
+ *
+ *  Copyright (C) 2006-2007 Mauro Carvalho Chehab <mchehab@infradead.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation version 2
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/videodev2.h>
+
+#define TM6000_URB_MSG_LEN 180
+
+struct usb_isoc_ctl {
+		/* max packet size of isoc transaction */
+	int				max_pkt_size;
+
+		/* number of allocated urbs */
+	int				num_bufs;
+
+		/* urb for isoc transfers */
+	struct urb			**urb;
+
+		/* transfer buffers for isoc transfer */
+	char				**transfer_buffer;
+
+		/* Last buffer command and region */
+	u8				cmd;
+	int				pos, size, pktsize;
+
+		/* Last field: ODD or EVEN? */
+	int				vfield, field;
+
+		/* Stores incomplete commands */
+	u32				tmp_buf;
+	int				tmp_buf_len;
+
+		/* Stores already requested buffers */
+	struct tm6000_buffer		*buf;
+};
diff --git a/kernel/drivers/media/usb/tm6000/tm6000-video.c b/kernel/drivers/media/usb/tm6000/tm6000-video.c
new file mode 100644
index 000000000..77ce9efe1
--- /dev/null
+++ b/kernel/drivers/media/usb/tm6000/tm6000-video.c
@@ -0,0 +1,1727 @@
+/*
+ *   tm6000-video.c - driver for TM5600/TM6000/TM6010 USB video capture devices
+ *
+ *  Copyright (C) 2006-2007 Mauro Carvalho Chehab <mchehab@infradead.org>
+ *
+ *  Copyright (C) 2007 Michel Ludwig <michel.ludwig@gmail.com>
+ *	- Fixed module load/unload
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation version 2
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/random.h>
+#include <linux/usb.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-event.h>
+#include <media/tuner.h>
+#include <linux/interrupt.h>
+#include <linux/kthread.h>
+#include <linux/highmem.h>
+#include <linux/freezer.h>
+
+#include "tm6000-regs.h"
+#include "tm6000.h"
+
+#define BUFFER_TIMEOUT     msecs_to_jiffies(2000)  /* 2 seconds */
+
+/* Limits minimum and default number of buffers */
+#define TM6000_MIN_BUF 4
+#define TM6000_DEF_BUF 8
+
+#define TM6000_NUM_URB_BUF 8
+
+#define TM6000_MAX_ISO_PACKETS	46	/* Max number of ISO packets */
+
+/* Declare static vars that will be used as parameters */
+static unsigned int vid_limit = 16;	/* Video memory limit, in Mb */
+static int video_nr = -1;		/* /dev/videoN, -1 for autodetect */
+static int radio_nr = -1;		/* /dev/radioN, -1 for autodetect */
+static bool keep_urb;			/* keep urb buffers allocated */
+
+/* Debug level */
+int tm6000_debug;
+EXPORT_SYMBOL_GPL(tm6000_debug);
+
+static struct tm6000_fmt format[] = {
+	{
+		.name     = "4:2:2, packed, YVY2",
+		.fourcc   = V4L2_PIX_FMT_YUYV,
+		.depth    = 16,
+	}, {
+		.name     = "4:2:2, packed, UYVY",
+		.fourcc   = V4L2_PIX_FMT_UYVY,
+		.depth    = 16,
+	}, {
+		.name     = "A/V + VBI mux packet",
+		.fourcc   = V4L2_PIX_FMT_TM6000,
+		.depth    = 16,
+	}
+};
+
+/* ------------------------------------------------------------------
+ *	DMA and thread functions
+ * ------------------------------------------------------------------
+ */
+
+#define norm_maxw(a) 720
+#define norm_maxh(a) 576
+
+#define norm_minw(a) norm_maxw(a)
+#define norm_minh(a) norm_maxh(a)
+
+/*
+ * video-buf generic routine to get the next available buffer
+ */
+static inline void get_next_buf(struct tm6000_dmaqueue *dma_q,
+			       struct tm6000_buffer   **buf)
+{
+	struct tm6000_core *dev = container_of(dma_q, struct tm6000_core, vidq);
+
+	if (list_empty(&dma_q->active)) {
+		dprintk(dev, V4L2_DEBUG_QUEUE, "No active queue to serve\n");
+		*buf = NULL;
+		return;
+	}
+
+	*buf = list_entry(dma_q->active.next,
+			struct tm6000_buffer, vb.queue);
+}
+
+/*
+ * Announces that a buffer were filled and request the next
+ */
+static inline void buffer_filled(struct tm6000_core *dev,
+				 struct tm6000_dmaqueue *dma_q,
+				 struct tm6000_buffer *buf)
+{
+	/* Advice that buffer was filled */
+	dprintk(dev, V4L2_DEBUG_ISOC, "[%p/%d] wakeup\n", buf, buf->vb.i);
+	buf->vb.state = VIDEOBUF_DONE;
+	buf->vb.field_count++;
+	v4l2_get_timestamp(&buf->vb.ts);
+
+	list_del(&buf->vb.queue);
+	wake_up(&buf->vb.done);
+}
+
+/*
+ * Identify the tm5600/6000 buffer header type and properly handles
+ */
+static int copy_streams(u8 *data, unsigned long len,
+			struct urb *urb)
+{
+	struct tm6000_dmaqueue  *dma_q = urb->context;
+	struct tm6000_core *dev = container_of(dma_q, struct tm6000_core, vidq);
+	u8 *ptr = data, *endp = data+len;
+	unsigned long header = 0;
+	int rc = 0;
+	unsigned int cmd, cpysize, pktsize, size, field, block, line, pos = 0;
+	struct tm6000_buffer *vbuf = NULL;
+	char *voutp = NULL;
+	unsigned int linewidth;
+
+	if (!dev->radio) {
+		/* get video buffer */
+		get_next_buf(dma_q, &vbuf);
+
+		if (!vbuf)
+			return rc;
+		voutp = videobuf_to_vmalloc(&vbuf->vb);
+
+		if (!voutp)
+			return 0;
+	}
+
+	for (ptr = data; ptr < endp;) {
+		if (!dev->isoc_ctl.cmd) {
+			/* Header */
+			if (dev->isoc_ctl.tmp_buf_len > 0) {
+				/* from last urb or packet */
+				header = dev->isoc_ctl.tmp_buf;
+				if (4 - dev->isoc_ctl.tmp_buf_len > 0) {
+					memcpy((u8 *)&header +
+						dev->isoc_ctl.tmp_buf_len,
+						ptr,
+						4 - dev->isoc_ctl.tmp_buf_len);
+					ptr += 4 - dev->isoc_ctl.tmp_buf_len;
+				}
+				dev->isoc_ctl.tmp_buf_len = 0;
+			} else {
+				if (ptr + 3 >= endp) {
+					/* have incomplete header */
+					dev->isoc_ctl.tmp_buf_len = endp - ptr;
+					memcpy(&dev->isoc_ctl.tmp_buf, ptr,
+						dev->isoc_ctl.tmp_buf_len);
+					return rc;
+				}
+				/* Seek for sync */
+				for (; ptr < endp - 3; ptr++) {
+					if (*(ptr + 3) == 0x47)
+						break;
+				}
+				/* Get message header */
+				header = *(unsigned long *)ptr;
+				ptr += 4;
+			}
+
+			/* split the header fields */
+			size = ((header & 0x7e) << 1);
+			if (size > 0)
+				size -= 4;
+			block = (header >> 7) & 0xf;
+			field = (header >> 11) & 0x1;
+			line  = (header >> 12) & 0x1ff;
+			cmd   = (header >> 21) & 0x7;
+			/* Validates haeder fields */
+			if (size > TM6000_URB_MSG_LEN)
+				size = TM6000_URB_MSG_LEN;
+			pktsize = TM6000_URB_MSG_LEN;
+			/*
+			 * calculate position in buffer and change the buffer
+			 */
+			switch (cmd) {
+			case TM6000_URB_MSG_VIDEO:
+				if (!dev->radio) {
+					if ((dev->isoc_ctl.vfield != field) &&
+						(field == 1)) {
+						/*
+						 * Announces that a new buffer
+						 * were filled
+						 */
+						buffer_filled(dev, dma_q, vbuf);
+						dprintk(dev, V4L2_DEBUG_ISOC,
+							"new buffer filled\n");
+						get_next_buf(dma_q, &vbuf);
+						if (!vbuf)
+							return rc;
+						voutp = videobuf_to_vmalloc(&vbuf->vb);
+						if (!voutp)
+							return rc;
+						memset(voutp, 0, vbuf->vb.size);
+					}
+					linewidth = vbuf->vb.width << 1;
+					pos = ((line << 1) - field - 1) *
+					linewidth + block * TM6000_URB_MSG_LEN;
+					/* Don't allow to write out of the buffer */
+					if (pos + size > vbuf->vb.size)
+						cmd = TM6000_URB_MSG_ERR;
+					dev->isoc_ctl.vfield = field;
+				}
+				break;
+			case TM6000_URB_MSG_VBI:
+				break;
+			case TM6000_URB_MSG_AUDIO:
+			case TM6000_URB_MSG_PTS:
+				size = pktsize; /* Size is always 180 bytes */
+				break;
+			}
+		} else {
+			/* Continue the last copy */
+			cmd = dev->isoc_ctl.cmd;
+			size = dev->isoc_ctl.size;
+			pos = dev->isoc_ctl.pos;
+			pktsize = dev->isoc_ctl.pktsize;
+			field = dev->isoc_ctl.field;
+		}
+		cpysize = (endp - ptr > size) ? size : endp - ptr;
+		if (cpysize) {
+			/* copy data in different buffers */
+			switch (cmd) {
+			case TM6000_URB_MSG_VIDEO:
+				/* Fills video buffer */
+				if (vbuf)
+					memcpy(&voutp[pos], ptr, cpysize);
+				break;
+			case TM6000_URB_MSG_AUDIO: {
+				int i;
+				for (i = 0; i < cpysize; i += 2)
+					swab16s((u16 *)(ptr + i));
+
+				tm6000_call_fillbuf(dev, TM6000_AUDIO, ptr, cpysize);
+				break;
+			}
+			case TM6000_URB_MSG_VBI:
+				/* Need some code to copy vbi buffer */
+				break;
+			case TM6000_URB_MSG_PTS: {
+				/* Need some code to copy pts */
+				u32 pts;
+				pts = *(u32 *)ptr;
+				dprintk(dev, V4L2_DEBUG_ISOC, "field %d, PTS %x",
+					field, pts);
+				break;
+			}
+			}
+		}
+		if (ptr + pktsize > endp) {
+			/*
+			 * End of URB packet, but cmd processing is not
+			 * complete. Preserve the state for a next packet
+			 */
+			dev->isoc_ctl.pos = pos + cpysize;
+			dev->isoc_ctl.size = size - cpysize;
+			dev->isoc_ctl.cmd = cmd;
+			dev->isoc_ctl.field = field;
+			dev->isoc_ctl.pktsize = pktsize - (endp - ptr);
+			ptr += endp - ptr;
+		} else {
+			dev->isoc_ctl.cmd = 0;
+			ptr += pktsize;
+		}
+	}
+	return 0;
+}
+
+/*
+ * Identify the tm5600/6000 buffer header type and properly handles
+ */
+static int copy_multiplexed(u8 *ptr, unsigned long len,
+			struct urb *urb)
+{
+	struct tm6000_dmaqueue  *dma_q = urb->context;
+	struct tm6000_core *dev = container_of(dma_q, struct tm6000_core, vidq);
+	unsigned int pos = dev->isoc_ctl.pos, cpysize;
+	int rc = 1;
+	struct tm6000_buffer *buf;
+	char *outp = NULL;
+
+	get_next_buf(dma_q, &buf);
+	if (buf)
+		outp = videobuf_to_vmalloc(&buf->vb);
+
+	if (!outp)
+		return 0;
+
+	while (len > 0) {
+		cpysize = min(len, buf->vb.size-pos);
+		memcpy(&outp[pos], ptr, cpysize);
+		pos += cpysize;
+		ptr += cpysize;
+		len -= cpysize;
+		if (pos >= buf->vb.size) {
+			pos = 0;
+			/* Announces that a new buffer were filled */
+			buffer_filled(dev, dma_q, buf);
+			dprintk(dev, V4L2_DEBUG_ISOC, "new buffer filled\n");
+			get_next_buf(dma_q, &buf);
+			if (!buf)
+				break;
+			outp = videobuf_to_vmalloc(&(buf->vb));
+			if (!outp)
+				return rc;
+			pos = 0;
+		}
+	}
+
+	dev->isoc_ctl.pos = pos;
+	return rc;
+}
+
+static inline void print_err_status(struct tm6000_core *dev,
+				     int packet, int status)
+{
+	char *errmsg = "Unknown";
+
+	switch (status) {
+	case -ENOENT:
+		errmsg = "unlinked synchronuously";
+		break;
+	case -ECONNRESET:
+		errmsg = "unlinked asynchronuously";
+		break;
+	case -ENOSR:
+		errmsg = "Buffer error (overrun)";
+		break;
+	case -EPIPE:
+		errmsg = "Stalled (device not responding)";
+		break;
+	case -EOVERFLOW:
+		errmsg = "Babble (bad cable?)";
+		break;
+	case -EPROTO:
+		errmsg = "Bit-stuff error (bad cable?)";
+		break;
+	case -EILSEQ:
+		errmsg = "CRC/Timeout (could be anything)";
+		break;
+	case -ETIME:
+		errmsg = "Device does not respond";
+		break;
+	}
+	if (packet < 0) {
+		dprintk(dev, V4L2_DEBUG_QUEUE, "URB status %d [%s].\n",
+			status, errmsg);
+	} else {
+		dprintk(dev, V4L2_DEBUG_QUEUE, "URB packet %d, status %d [%s].\n",
+			packet, status, errmsg);
+	}
+}
+
+
+/*
+ * Controls the isoc copy of each urb packet
+ */
+static inline int tm6000_isoc_copy(struct urb *urb)
+{
+	struct tm6000_dmaqueue  *dma_q = urb->context;
+	struct tm6000_core *dev = container_of(dma_q, struct tm6000_core, vidq);
+	int i, len = 0, rc = 1, status;
+	char *p;
+
+	if (urb->status < 0) {
+		print_err_status(dev, -1, urb->status);
+		return 0;
+	}
+
+	for (i = 0; i < urb->number_of_packets; i++) {
+		status = urb->iso_frame_desc[i].status;
+
+		if (status < 0) {
+			print_err_status(dev, i, status);
+			continue;
+		}
+
+		len = urb->iso_frame_desc[i].actual_length;
+
+		if (len > 0) {
+			p = urb->transfer_buffer + urb->iso_frame_desc[i].offset;
+			if (!urb->iso_frame_desc[i].status) {
+				if ((dev->fourcc) == V4L2_PIX_FMT_TM6000) {
+					rc = copy_multiplexed(p, len, urb);
+					if (rc <= 0)
+						return rc;
+				} else {
+					copy_streams(p, len, urb);
+				}
+			}
+		}
+	}
+	return rc;
+}
+
+/* ------------------------------------------------------------------
+ *	URB control
+ * ------------------------------------------------------------------
+ */
+
+/*
+ * IRQ callback, called by URB callback
+ */
+static void tm6000_irq_callback(struct urb *urb)
+{
+	struct tm6000_dmaqueue  *dma_q = urb->context;
+	struct tm6000_core *dev = container_of(dma_q, struct tm6000_core, vidq);
+	int i;
+
+	switch (urb->status) {
+	case 0:
+	case -ETIMEDOUT:
+		break;
+
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		return;
+
+	default:
+		tm6000_err("urb completion error %d.\n", urb->status);
+		break;
+	}
+
+	spin_lock(&dev->slock);
+	tm6000_isoc_copy(urb);
+	spin_unlock(&dev->slock);
+
+	/* Reset urb buffers */
+	for (i = 0; i < urb->number_of_packets; i++) {
+		urb->iso_frame_desc[i].status = 0;
+		urb->iso_frame_desc[i].actual_length = 0;
+	}
+
+	urb->status = usb_submit_urb(urb, GFP_ATOMIC);
+	if (urb->status)
+		tm6000_err("urb resubmit failed (error=%i)\n",
+			urb->status);
+}
+
+/*
+ * Allocate URB buffers
+ */
+static int tm6000_alloc_urb_buffers(struct tm6000_core *dev)
+{
+	int num_bufs = TM6000_NUM_URB_BUF;
+	int i;
+
+	if (dev->urb_buffer != NULL)
+		return 0;
+
+	dev->urb_buffer = kmalloc(sizeof(void *)*num_bufs, GFP_KERNEL);
+	if (!dev->urb_buffer) {
+		tm6000_err("cannot allocate memory for urb buffers\n");
+		return -ENOMEM;
+	}
+
+	dev->urb_dma = kmalloc(sizeof(dma_addr_t *)*num_bufs, GFP_KERNEL);
+	if (!dev->urb_dma) {
+		tm6000_err("cannot allocate memory for urb dma pointers\n");
+		return -ENOMEM;
+	}
+
+	for (i = 0; i < num_bufs; i++) {
+		dev->urb_buffer[i] = usb_alloc_coherent(
+					dev->udev, dev->urb_size,
+					GFP_KERNEL, &dev->urb_dma[i]);
+		if (!dev->urb_buffer[i]) {
+			tm6000_err("unable to allocate %i bytes for transfer buffer %i\n",
+				    dev->urb_size, i);
+			return -ENOMEM;
+		}
+		memset(dev->urb_buffer[i], 0, dev->urb_size);
+	}
+
+	return 0;
+}
+
+/*
+ * Free URB buffers
+ */
+static int tm6000_free_urb_buffers(struct tm6000_core *dev)
+{
+	int i;
+
+	if (dev->urb_buffer == NULL)
+		return 0;
+
+	for (i = 0; i < TM6000_NUM_URB_BUF; i++) {
+		if (dev->urb_buffer[i]) {
+			usb_free_coherent(dev->udev,
+					dev->urb_size,
+					dev->urb_buffer[i],
+					dev->urb_dma[i]);
+			dev->urb_buffer[i] = NULL;
+		}
+	}
+	kfree(dev->urb_buffer);
+	kfree(dev->urb_dma);
+	dev->urb_buffer = NULL;
+	dev->urb_dma = NULL;
+
+	return 0;
+}
+
+/*
+ * Stop and Deallocate URBs
+ */
+static void tm6000_uninit_isoc(struct tm6000_core *dev)
+{
+	struct urb *urb;
+	int i;
+
+	dev->isoc_ctl.buf = NULL;
+	for (i = 0; i < dev->isoc_ctl.num_bufs; i++) {
+		urb = dev->isoc_ctl.urb[i];
+		if (urb) {
+			usb_kill_urb(urb);
+			usb_unlink_urb(urb);
+			usb_free_urb(urb);
+			dev->isoc_ctl.urb[i] = NULL;
+		}
+		dev->isoc_ctl.transfer_buffer[i] = NULL;
+	}
+
+	if (!keep_urb)
+		tm6000_free_urb_buffers(dev);
+
+	kfree(dev->isoc_ctl.urb);
+	kfree(dev->isoc_ctl.transfer_buffer);
+
+	dev->isoc_ctl.urb = NULL;
+	dev->isoc_ctl.transfer_buffer = NULL;
+	dev->isoc_ctl.num_bufs = 0;
+}
+
+/*
+ * Assign URBs and start IRQ
+ */
+static int tm6000_prepare_isoc(struct tm6000_core *dev)
+{
+	struct tm6000_dmaqueue *dma_q = &dev->vidq;
+	int i, j, sb_size, pipe, size, max_packets;
+	int num_bufs = TM6000_NUM_URB_BUF;
+	struct urb *urb;
+
+	/* De-allocates all pending stuff */
+	tm6000_uninit_isoc(dev);
+	/* Stop interrupt USB pipe */
+	tm6000_ir_int_stop(dev);
+
+	usb_set_interface(dev->udev,
+			  dev->isoc_in.bInterfaceNumber,
+			  dev->isoc_in.bAlternateSetting);
+
+	/* Start interrupt USB pipe */
+	tm6000_ir_int_start(dev);
+
+	pipe = usb_rcvisocpipe(dev->udev,
+			       dev->isoc_in.endp->desc.bEndpointAddress &
+			       USB_ENDPOINT_NUMBER_MASK);
+
+	size = usb_maxpacket(dev->udev, pipe, usb_pipeout(pipe));
+
+	if (size > dev->isoc_in.maxsize)
+		size = dev->isoc_in.maxsize;
+
+	dev->isoc_ctl.max_pkt_size = size;
+
+	max_packets = TM6000_MAX_ISO_PACKETS;
+	sb_size = max_packets * size;
+	dev->urb_size = sb_size;
+
+	dev->isoc_ctl.num_bufs = num_bufs;
+
+	dev->isoc_ctl.urb = kmalloc(sizeof(void *)*num_bufs, GFP_KERNEL);
+	if (!dev->isoc_ctl.urb) {
+		tm6000_err("cannot alloc memory for usb buffers\n");
+		return -ENOMEM;
+	}
+
+	dev->isoc_ctl.transfer_buffer = kmalloc(sizeof(void *)*num_bufs,
+				   GFP_KERNEL);
+	if (!dev->isoc_ctl.transfer_buffer) {
+		tm6000_err("cannot allocate memory for usbtransfer\n");
+		kfree(dev->isoc_ctl.urb);
+		return -ENOMEM;
+	}
+
+	dprintk(dev, V4L2_DEBUG_QUEUE, "Allocating %d x %d packets"
+		    " (%d bytes) of %d bytes each to handle %u size\n",
+		    max_packets, num_bufs, sb_size,
+		    dev->isoc_in.maxsize, size);
+
+
+	if (!dev->urb_buffer && tm6000_alloc_urb_buffers(dev) < 0) {
+		tm6000_err("cannot allocate memory for urb buffers\n");
+
+		/* call free, as some buffers might have been allocated */
+		tm6000_free_urb_buffers(dev);
+		kfree(dev->isoc_ctl.urb);
+		kfree(dev->isoc_ctl.transfer_buffer);
+		return -ENOMEM;
+	}
+
+	/* allocate urbs and transfer buffers */
+	for (i = 0; i < dev->isoc_ctl.num_bufs; i++) {
+		urb = usb_alloc_urb(max_packets, GFP_KERNEL);
+		if (!urb) {
+			tm6000_err("cannot alloc isoc_ctl.urb %i\n", i);
+			tm6000_uninit_isoc(dev);
+			usb_free_urb(urb);
+			return -ENOMEM;
+		}
+		dev->isoc_ctl.urb[i] = urb;
+
+		urb->transfer_dma = dev->urb_dma[i];
+		dev->isoc_ctl.transfer_buffer[i] = dev->urb_buffer[i];
+
+		usb_fill_bulk_urb(urb, dev->udev, pipe,
+				  dev->isoc_ctl.transfer_buffer[i], sb_size,
+				  tm6000_irq_callback, dma_q);
+		urb->interval = dev->isoc_in.endp->desc.bInterval;
+		urb->number_of_packets = max_packets;
+		urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP;
+
+		for (j = 0; j < max_packets; j++) {
+			urb->iso_frame_desc[j].offset = size * j;
+			urb->iso_frame_desc[j].length = size;
+		}
+	}
+
+	return 0;
+}
+
+static int tm6000_start_thread(struct tm6000_core *dev)
+{
+	struct tm6000_dmaqueue *dma_q = &dev->vidq;
+	int i;
+
+	dma_q->frame = 0;
+	dma_q->ini_jiffies = jiffies;
+
+	init_waitqueue_head(&dma_q->wq);
+
+	/* submit urbs and enables IRQ */
+	for (i = 0; i < dev->isoc_ctl.num_bufs; i++) {
+		int rc = usb_submit_urb(dev->isoc_ctl.urb[i], GFP_ATOMIC);
+		if (rc) {
+			tm6000_err("submit of urb %i failed (error=%i)\n", i,
+				   rc);
+			tm6000_uninit_isoc(dev);
+			return rc;
+		}
+	}
+
+	return 0;
+}
+
+/* ------------------------------------------------------------------
+ *	Videobuf operations
+ * ------------------------------------------------------------------
+ */
+
+static int
+buffer_setup(struct videobuf_queue *vq, unsigned int *count, unsigned int *size)
+{
+	struct tm6000_fh *fh = vq->priv_data;
+
+	*size = fh->fmt->depth * fh->width * fh->height >> 3;
+	if (0 == *count)
+		*count = TM6000_DEF_BUF;
+
+	if (*count < TM6000_MIN_BUF)
+		*count = TM6000_MIN_BUF;
+
+	while (*size * *count > vid_limit * 1024 * 1024)
+		(*count)--;
+
+	return 0;
+}
+
+static void free_buffer(struct videobuf_queue *vq, struct tm6000_buffer *buf)
+{
+	struct tm6000_fh *fh = vq->priv_data;
+	struct tm6000_core   *dev = fh->dev;
+	unsigned long flags;
+
+	if (in_interrupt())
+		BUG();
+
+	/* We used to wait for the buffer to finish here, but this didn't work
+	   because, as we were keeping the state as VIDEOBUF_QUEUED,
+	   videobuf_queue_cancel marked it as finished for us.
+	   (Also, it could wedge forever if the hardware was misconfigured.)
+
+	   This should be safe; by the time we get here, the buffer isn't
+	   queued anymore. If we ever start marking the buffers as
+	   VIDEOBUF_ACTIVE, it won't be, though.
+	*/
+	spin_lock_irqsave(&dev->slock, flags);
+	if (dev->isoc_ctl.buf == buf)
+		dev->isoc_ctl.buf = NULL;
+	spin_unlock_irqrestore(&dev->slock, flags);
+
+	videobuf_vmalloc_free(&buf->vb);
+	buf->vb.state = VIDEOBUF_NEEDS_INIT;
+}
+
+static int
+buffer_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb,
+						enum v4l2_field field)
+{
+	struct tm6000_fh     *fh  = vq->priv_data;
+	struct tm6000_buffer *buf = container_of(vb, struct tm6000_buffer, vb);
+	struct tm6000_core   *dev = fh->dev;
+	int rc = 0;
+
+	BUG_ON(NULL == fh->fmt);
+
+
+	/* FIXME: It assumes depth=2 */
+	/* The only currently supported format is 16 bits/pixel */
+	buf->vb.size = fh->fmt->depth*fh->width*fh->height >> 3;
+	if (0 != buf->vb.baddr  &&  buf->vb.bsize < buf->vb.size)
+		return -EINVAL;
+
+	if (buf->fmt       != fh->fmt    ||
+	    buf->vb.width  != fh->width  ||
+	    buf->vb.height != fh->height ||
+	    buf->vb.field  != field) {
+		buf->fmt       = fh->fmt;
+		buf->vb.width  = fh->width;
+		buf->vb.height = fh->height;
+		buf->vb.field  = field;
+		buf->vb.state = VIDEOBUF_NEEDS_INIT;
+	}
+
+	if (VIDEOBUF_NEEDS_INIT == buf->vb.state) {
+		rc = videobuf_iolock(vq, &buf->vb, NULL);
+		if (rc != 0)
+			goto fail;
+	}
+
+	if (!dev->isoc_ctl.num_bufs) {
+		rc = tm6000_prepare_isoc(dev);
+		if (rc < 0)
+			goto fail;
+
+		rc = tm6000_start_thread(dev);
+		if (rc < 0)
+			goto fail;
+
+	}
+
+	buf->vb.state = VIDEOBUF_PREPARED;
+	return 0;
+
+fail:
+	free_buffer(vq, buf);
+	return rc;
+}
+
+static void
+buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb)
+{
+	struct tm6000_buffer    *buf     = container_of(vb, struct tm6000_buffer, vb);
+	struct tm6000_fh        *fh      = vq->priv_data;
+	struct tm6000_core      *dev     = fh->dev;
+	struct tm6000_dmaqueue  *vidq    = &dev->vidq;
+
+	buf->vb.state = VIDEOBUF_QUEUED;
+	list_add_tail(&buf->vb.queue, &vidq->active);
+}
+
+static void buffer_release(struct videobuf_queue *vq, struct videobuf_buffer *vb)
+{
+	struct tm6000_buffer   *buf  = container_of(vb, struct tm6000_buffer, vb);
+
+	free_buffer(vq, buf);
+}
+
+static struct videobuf_queue_ops tm6000_video_qops = {
+	.buf_setup      = buffer_setup,
+	.buf_prepare    = buffer_prepare,
+	.buf_queue      = buffer_queue,
+	.buf_release    = buffer_release,
+};
+
+/* ------------------------------------------------------------------
+ *	IOCTL handling
+ * ------------------------------------------------------------------
+ */
+
+static bool is_res_read(struct tm6000_core *dev, struct tm6000_fh *fh)
+{
+	/* Is the current fh handling it? if so, that's OK */
+	if (dev->resources == fh && dev->is_res_read)
+		return true;
+
+	return false;
+}
+
+static bool is_res_streaming(struct tm6000_core *dev, struct tm6000_fh *fh)
+{
+	/* Is the current fh handling it? if so, that's OK */
+	if (dev->resources == fh)
+		return true;
+
+	return false;
+}
+
+static bool res_get(struct tm6000_core *dev, struct tm6000_fh *fh,
+		   bool is_res_read)
+{
+	/* Is the current fh handling it? if so, that's OK */
+	if (dev->resources == fh && dev->is_res_read == is_res_read)
+		return true;
+
+	/* is it free? */
+	if (dev->resources)
+		return false;
+
+	/* grab it */
+	dev->resources = fh;
+	dev->is_res_read = is_res_read;
+	dprintk(dev, V4L2_DEBUG_RES_LOCK, "res: get\n");
+	return true;
+}
+
+static void res_free(struct tm6000_core *dev, struct tm6000_fh *fh)
+{
+	/* Is the current fh handling it? if so, that's OK */
+	if (dev->resources != fh)
+		return;
+
+	dev->resources = NULL;
+	dprintk(dev, V4L2_DEBUG_RES_LOCK, "res: put\n");
+}
+
+/* ------------------------------------------------------------------
+ *	IOCTL vidioc handling
+ * ------------------------------------------------------------------
+ */
+static int vidioc_querycap(struct file *file, void  *priv,
+					struct v4l2_capability *cap)
+{
+	struct tm6000_core *dev = ((struct tm6000_fh *)priv)->dev;
+	struct video_device *vdev = video_devdata(file);
+
+	strlcpy(cap->driver, "tm6000", sizeof(cap->driver));
+	strlcpy(cap->card, "Trident TVMaster TM5600/6000/6010", sizeof(cap->card));
+	usb_make_path(dev->udev, cap->bus_info, sizeof(cap->bus_info));
+	if (dev->tuner_type != TUNER_ABSENT)
+		cap->device_caps |= V4L2_CAP_TUNER;
+	if (vdev->vfl_type == VFL_TYPE_GRABBER)
+		cap->device_caps |= V4L2_CAP_VIDEO_CAPTURE |
+				V4L2_CAP_STREAMING |
+				V4L2_CAP_READWRITE;
+	else
+		cap->device_caps |= V4L2_CAP_RADIO;
+	cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS |
+		V4L2_CAP_RADIO | V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE;
+
+	return 0;
+}
+
+static int vidioc_enum_fmt_vid_cap(struct file *file, void  *priv,
+					struct v4l2_fmtdesc *f)
+{
+	if (f->index >= ARRAY_SIZE(format))
+		return -EINVAL;
+
+	strlcpy(f->description, format[f->index].name, sizeof(f->description));
+	f->pixelformat = format[f->index].fourcc;
+	return 0;
+}
+
+static int vidioc_g_fmt_vid_cap(struct file *file, void *priv,
+					struct v4l2_format *f)
+{
+	struct tm6000_fh  *fh = priv;
+
+	f->fmt.pix.width        = fh->width;
+	f->fmt.pix.height       = fh->height;
+	f->fmt.pix.field        = fh->vb_vidq.field;
+	f->fmt.pix.pixelformat  = fh->fmt->fourcc;
+	f->fmt.pix.colorspace   = V4L2_COLORSPACE_SMPTE170M;
+	f->fmt.pix.bytesperline =
+		(f->fmt.pix.width * fh->fmt->depth) >> 3;
+	f->fmt.pix.sizeimage =
+		f->fmt.pix.height * f->fmt.pix.bytesperline;
+
+	return 0;
+}
+
+static struct tm6000_fmt *format_by_fourcc(unsigned int fourcc)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(format); i++)
+		if (format[i].fourcc == fourcc)
+			return format+i;
+	return NULL;
+}
+
+static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
+			struct v4l2_format *f)
+{
+	struct tm6000_core *dev = ((struct tm6000_fh *)priv)->dev;
+	struct tm6000_fmt *fmt;
+	enum v4l2_field field;
+
+	fmt = format_by_fourcc(f->fmt.pix.pixelformat);
+	if (NULL == fmt) {
+		dprintk(dev, 2, "Fourcc format (0x%08x)"
+				" invalid.\n", f->fmt.pix.pixelformat);
+		return -EINVAL;
+	}
+
+	field = f->fmt.pix.field;
+
+	field = V4L2_FIELD_INTERLACED;
+
+	tm6000_get_std_res(dev);
+
+	f->fmt.pix.width  = dev->width;
+	f->fmt.pix.height = dev->height;
+
+	f->fmt.pix.width &= ~0x01;
+
+	f->fmt.pix.field = field;
+
+	f->fmt.pix.bytesperline =
+		(f->fmt.pix.width * fmt->depth) >> 3;
+	f->fmt.pix.sizeimage =
+		f->fmt.pix.height * f->fmt.pix.bytesperline;
+	f->fmt.pix.colorspace   = V4L2_COLORSPACE_SMPTE170M;
+
+	return 0;
+}
+
+/*FIXME: This seems to be generic enough to be at videodev2 */
+static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
+					struct v4l2_format *f)
+{
+	struct tm6000_fh  *fh = priv;
+	struct tm6000_core *dev = fh->dev;
+	int ret = vidioc_try_fmt_vid_cap(file, fh, f);
+	if (ret < 0)
+		return ret;
+
+	fh->fmt           = format_by_fourcc(f->fmt.pix.pixelformat);
+	fh->width         = f->fmt.pix.width;
+	fh->height        = f->fmt.pix.height;
+	fh->vb_vidq.field = f->fmt.pix.field;
+	fh->type          = f->type;
+
+	dev->fourcc       = f->fmt.pix.pixelformat;
+
+	tm6000_set_fourcc_format(dev);
+
+	return 0;
+}
+
+static int vidioc_reqbufs(struct file *file, void *priv,
+			   struct v4l2_requestbuffers *p)
+{
+	struct tm6000_fh  *fh = priv;
+
+	return videobuf_reqbufs(&fh->vb_vidq, p);
+}
+
+static int vidioc_querybuf(struct file *file, void *priv,
+			    struct v4l2_buffer *p)
+{
+	struct tm6000_fh  *fh = priv;
+
+	return videobuf_querybuf(&fh->vb_vidq, p);
+}
+
+static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *p)
+{
+	struct tm6000_fh  *fh = priv;
+
+	return videobuf_qbuf(&fh->vb_vidq, p);
+}
+
+static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *p)
+{
+	struct tm6000_fh  *fh = priv;
+
+	return videobuf_dqbuf(&fh->vb_vidq, p,
+				file->f_flags & O_NONBLOCK);
+}
+
+static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i)
+{
+	struct tm6000_fh *fh = priv;
+	struct tm6000_core *dev = fh->dev;
+
+	if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+	if (i != fh->type)
+		return -EINVAL;
+
+	if (!res_get(dev, fh, false))
+		return -EBUSY;
+	return videobuf_streamon(&fh->vb_vidq);
+}
+
+static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i)
+{
+	struct tm6000_fh *fh = priv;
+	struct tm6000_core *dev = fh->dev;
+
+	if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
+	if (i != fh->type)
+		return -EINVAL;
+
+	videobuf_streamoff(&fh->vb_vidq);
+	res_free(dev, fh);
+
+	return 0;
+}
+
+static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id norm)
+{
+	int rc = 0;
+	struct tm6000_fh *fh = priv;
+	struct tm6000_core *dev = fh->dev;
+
+	dev->norm = norm;
+	rc = tm6000_init_analog_mode(dev);
+
+	fh->width  = dev->width;
+	fh->height = dev->height;
+
+	if (rc < 0)
+		return rc;
+
+	v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_std, dev->norm);
+
+	return 0;
+}
+
+static int vidioc_g_std(struct file *file, void *priv, v4l2_std_id *norm)
+{
+	struct tm6000_fh *fh = priv;
+	struct tm6000_core *dev = fh->dev;
+
+	*norm = dev->norm;
+	return 0;
+}
+
+static const char *iname[] = {
+	[TM6000_INPUT_TV] = "Television",
+	[TM6000_INPUT_COMPOSITE1] = "Composite 1",
+	[TM6000_INPUT_COMPOSITE2] = "Composite 2",
+	[TM6000_INPUT_SVIDEO] = "S-Video",
+};
+
+static int vidioc_enum_input(struct file *file, void *priv,
+				struct v4l2_input *i)
+{
+	struct tm6000_fh   *fh = priv;
+	struct tm6000_core *dev = fh->dev;
+	unsigned int n;
+
+	n = i->index;
+	if (n >= 3)
+		return -EINVAL;
+
+	if (!dev->vinput[n].type)
+		return -EINVAL;
+
+	i->index = n;
+
+	if (dev->vinput[n].type == TM6000_INPUT_TV)
+		i->type = V4L2_INPUT_TYPE_TUNER;
+	else
+		i->type = V4L2_INPUT_TYPE_CAMERA;
+
+	strcpy(i->name, iname[dev->vinput[n].type]);
+
+	i->std = TM6000_STD;
+
+	return 0;
+}
+
+static int vidioc_g_input(struct file *file, void *priv, unsigned int *i)
+{
+	struct tm6000_fh   *fh = priv;
+	struct tm6000_core *dev = fh->dev;
+
+	*i = dev->input;
+
+	return 0;
+}
+
+static int vidioc_s_input(struct file *file, void *priv, unsigned int i)
+{
+	struct tm6000_fh   *fh = priv;
+	struct tm6000_core *dev = fh->dev;
+	int rc = 0;
+
+	if (i >= 3)
+		return -EINVAL;
+	if (!dev->vinput[i].type)
+		return -EINVAL;
+
+	dev->input = i;
+
+	rc = vidioc_s_std(file, priv, dev->norm);
+
+	return rc;
+}
+
+/* --- controls ---------------------------------------------- */
+
+static int tm6000_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct tm6000_core *dev = container_of(ctrl->handler, struct tm6000_core, ctrl_handler);
+	u8  val = ctrl->val;
+
+	switch (ctrl->id) {
+	case V4L2_CID_CONTRAST:
+		tm6000_set_reg(dev, TM6010_REQ07_R08_LUMA_CONTRAST_ADJ, val);
+		return 0;
+	case V4L2_CID_BRIGHTNESS:
+		tm6000_set_reg(dev, TM6010_REQ07_R09_LUMA_BRIGHTNESS_ADJ, val);
+		return 0;
+	case V4L2_CID_SATURATION:
+		tm6000_set_reg(dev, TM6010_REQ07_R0A_CHROMA_SATURATION_ADJ, val);
+		return 0;
+	case V4L2_CID_HUE:
+		tm6000_set_reg(dev, TM6010_REQ07_R0B_CHROMA_HUE_PHASE_ADJ, val);
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static const struct v4l2_ctrl_ops tm6000_ctrl_ops = {
+	.s_ctrl = tm6000_s_ctrl,
+};
+
+static int tm6000_radio_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct tm6000_core *dev = container_of(ctrl->handler,
+			struct tm6000_core, radio_ctrl_handler);
+	u8  val = ctrl->val;
+
+	switch (ctrl->id) {
+	case V4L2_CID_AUDIO_MUTE:
+		dev->ctl_mute = val;
+		tm6000_tvaudio_set_mute(dev, val);
+		return 0;
+	case V4L2_CID_AUDIO_VOLUME:
+		dev->ctl_volume = val;
+		tm6000_set_volume(dev, val);
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static const struct v4l2_ctrl_ops tm6000_radio_ctrl_ops = {
+	.s_ctrl = tm6000_radio_s_ctrl,
+};
+
+static int vidioc_g_tuner(struct file *file, void *priv,
+				struct v4l2_tuner *t)
+{
+	struct tm6000_fh   *fh  = priv;
+	struct tm6000_core *dev = fh->dev;
+
+	if (UNSET == dev->tuner_type)
+		return -ENOTTY;
+	if (0 != t->index)
+		return -EINVAL;
+
+	strcpy(t->name, "Television");
+	t->type       = V4L2_TUNER_ANALOG_TV;
+	t->capability = V4L2_TUNER_CAP_NORM | V4L2_TUNER_CAP_STEREO;
+	t->rangehigh  = 0xffffffffUL;
+	t->rxsubchans = V4L2_TUNER_SUB_STEREO;
+
+	v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, g_tuner, t);
+
+	t->audmode = dev->amode;
+
+	return 0;
+}
+
+static int vidioc_s_tuner(struct file *file, void *priv,
+				const struct v4l2_tuner *t)
+{
+	struct tm6000_fh   *fh  = priv;
+	struct tm6000_core *dev = fh->dev;
+
+	if (UNSET == dev->tuner_type)
+		return -ENOTTY;
+	if (0 != t->index)
+		return -EINVAL;
+
+	if (t->audmode > V4L2_TUNER_MODE_STEREO)
+		dev->amode = V4L2_TUNER_MODE_STEREO;
+	else
+		dev->amode = t->audmode;
+	dprintk(dev, 3, "audio mode: %x\n", t->audmode);
+
+	v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_tuner, t);
+
+	return 0;
+}
+
+static int vidioc_g_frequency(struct file *file, void *priv,
+				struct v4l2_frequency *f)
+{
+	struct tm6000_fh   *fh  = priv;
+	struct tm6000_core *dev = fh->dev;
+
+	if (UNSET == dev->tuner_type)
+		return -ENOTTY;
+	if (f->tuner)
+		return -EINVAL;
+
+	f->frequency = dev->freq;
+
+	v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, g_frequency, f);
+
+	return 0;
+}
+
+static int vidioc_s_frequency(struct file *file, void *priv,
+				const struct v4l2_frequency *f)
+{
+	struct tm6000_fh   *fh  = priv;
+	struct tm6000_core *dev = fh->dev;
+
+	if (UNSET == dev->tuner_type)
+		return -ENOTTY;
+	if (f->tuner != 0)
+		return -EINVAL;
+
+	dev->freq = f->frequency;
+	v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, f);
+
+	return 0;
+}
+
+static int radio_g_tuner(struct file *file, void *priv,
+					struct v4l2_tuner *t)
+{
+	struct tm6000_fh *fh = file->private_data;
+	struct tm6000_core *dev = fh->dev;
+
+	if (0 != t->index)
+		return -EINVAL;
+
+	memset(t, 0, sizeof(*t));
+	strcpy(t->name, "Radio");
+	t->type = V4L2_TUNER_RADIO;
+	t->capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO;
+	t->rxsubchans = V4L2_TUNER_SUB_STEREO;
+	t->audmode = V4L2_TUNER_MODE_STEREO;
+
+	v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, g_tuner, t);
+
+	return 0;
+}
+
+static int radio_s_tuner(struct file *file, void *priv,
+					const struct v4l2_tuner *t)
+{
+	struct tm6000_fh *fh = file->private_data;
+	struct tm6000_core *dev = fh->dev;
+
+	if (0 != t->index)
+		return -EINVAL;
+	v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_tuner, t);
+	return 0;
+}
+
+/* ------------------------------------------------------------------
+	File operations for the device
+   ------------------------------------------------------------------*/
+
+static int __tm6000_open(struct file *file)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct tm6000_core *dev = video_drvdata(file);
+	struct tm6000_fh *fh;
+	enum v4l2_buf_type type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	int rc;
+	int radio = 0;
+
+	dprintk(dev, V4L2_DEBUG_OPEN, "tm6000: open called (dev=%s)\n",
+		video_device_node_name(vdev));
+
+	switch (vdev->vfl_type) {
+	case VFL_TYPE_GRABBER:
+		type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+		break;
+	case VFL_TYPE_VBI:
+		type = V4L2_BUF_TYPE_VBI_CAPTURE;
+		break;
+	case VFL_TYPE_RADIO:
+		radio = 1;
+		break;
+	}
+
+	/* If more than one user, mutex should be added */
+	dev->users++;
+
+	dprintk(dev, V4L2_DEBUG_OPEN, "open dev=%s type=%s users=%d\n",
+		video_device_node_name(vdev), v4l2_type_names[type],
+		dev->users);
+
+	/* allocate + initialize per filehandle data */
+	fh = kzalloc(sizeof(*fh), GFP_KERNEL);
+	if (NULL == fh) {
+		dev->users--;
+		return -ENOMEM;
+	}
+
+	v4l2_fh_init(&fh->fh, vdev);
+	file->private_data = fh;
+	fh->dev      = dev;
+	fh->radio    = radio;
+	dev->radio   = radio;
+	fh->type     = type;
+	dev->fourcc  = format[0].fourcc;
+
+	fh->fmt      = format_by_fourcc(dev->fourcc);
+
+	tm6000_get_std_res(dev);
+
+	fh->width = dev->width;
+	fh->height = dev->height;
+
+	dprintk(dev, V4L2_DEBUG_OPEN, "Open: fh=0x%08lx, dev=0x%08lx, "
+						"dev->vidq=0x%08lx\n",
+			(unsigned long)fh, (unsigned long)dev,
+			(unsigned long)&dev->vidq);
+	dprintk(dev, V4L2_DEBUG_OPEN, "Open: list_empty "
+				"queued=%d\n", list_empty(&dev->vidq.queued));
+	dprintk(dev, V4L2_DEBUG_OPEN, "Open: list_empty "
+				"active=%d\n", list_empty(&dev->vidq.active));
+
+	/* initialize hardware on analog mode */
+	rc = tm6000_init_analog_mode(dev);
+	if (rc < 0)
+		return rc;
+
+	dev->mode = TM6000_MODE_ANALOG;
+
+	if (!fh->radio) {
+		videobuf_queue_vmalloc_init(&fh->vb_vidq, &tm6000_video_qops,
+				NULL, &dev->slock,
+				fh->type,
+				V4L2_FIELD_INTERLACED,
+				sizeof(struct tm6000_buffer), fh, &dev->lock);
+	} else {
+		dprintk(dev, V4L2_DEBUG_OPEN, "video_open: setting radio device\n");
+		tm6000_set_audio_rinput(dev);
+		v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_radio);
+		tm6000_prepare_isoc(dev);
+		tm6000_start_thread(dev);
+	}
+	v4l2_fh_add(&fh->fh);
+
+	return 0;
+}
+
+static int tm6000_open(struct file *file)
+{
+	struct video_device *vdev = video_devdata(file);
+	int res;
+
+	mutex_lock(vdev->lock);
+	res = __tm6000_open(file);
+	mutex_unlock(vdev->lock);
+	return res;
+}
+
+static ssize_t
+tm6000_read(struct file *file, char __user *data, size_t count, loff_t *pos)
+{
+	struct tm6000_fh *fh = file->private_data;
+	struct tm6000_core *dev = fh->dev;
+
+	if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
+		int res;
+
+		if (!res_get(fh->dev, fh, true))
+			return -EBUSY;
+
+		if (mutex_lock_interruptible(&dev->lock))
+			return -ERESTARTSYS;
+		res = videobuf_read_stream(&fh->vb_vidq, data, count, pos, 0,
+					file->f_flags & O_NONBLOCK);
+		mutex_unlock(&dev->lock);
+		return res;
+	}
+	return 0;
+}
+
+static unsigned int
+__tm6000_poll(struct file *file, struct poll_table_struct *wait)
+{
+	unsigned long req_events = poll_requested_events(wait);
+	struct tm6000_fh        *fh = file->private_data;
+	struct tm6000_buffer    *buf;
+	int res = 0;
+
+	if (v4l2_event_pending(&fh->fh))
+		res = POLLPRI;
+	else if (req_events & POLLPRI)
+		poll_wait(file, &fh->fh.wait, wait);
+	if (V4L2_BUF_TYPE_VIDEO_CAPTURE != fh->type)
+		return res | POLLERR;
+
+	if (!!is_res_streaming(fh->dev, fh))
+		return res | POLLERR;
+
+	if (!is_res_read(fh->dev, fh)) {
+		/* streaming capture */
+		if (list_empty(&fh->vb_vidq.stream))
+			return res | POLLERR;
+		buf = list_entry(fh->vb_vidq.stream.next, struct tm6000_buffer, vb.stream);
+		poll_wait(file, &buf->vb.done, wait);
+		if (buf->vb.state == VIDEOBUF_DONE ||
+		    buf->vb.state == VIDEOBUF_ERROR)
+			return res | POLLIN | POLLRDNORM;
+	} else if (req_events & (POLLIN | POLLRDNORM)) {
+		/* read() capture */
+		return res | videobuf_poll_stream(file, &fh->vb_vidq, wait);
+	}
+	return res;
+}
+
+static unsigned int tm6000_poll(struct file *file, struct poll_table_struct *wait)
+{
+	struct tm6000_fh *fh = file->private_data;
+	struct tm6000_core *dev = fh->dev;
+	unsigned int res;
+
+	mutex_lock(&dev->lock);
+	res = __tm6000_poll(file, wait);
+	mutex_unlock(&dev->lock);
+	return res;
+}
+
+static int tm6000_release(struct file *file)
+{
+	struct tm6000_fh         *fh = file->private_data;
+	struct tm6000_core      *dev = fh->dev;
+	struct video_device    *vdev = video_devdata(file);
+
+	dprintk(dev, V4L2_DEBUG_OPEN, "tm6000: close called (dev=%s, users=%d)\n",
+		video_device_node_name(vdev), dev->users);
+
+	mutex_lock(&dev->lock);
+	dev->users--;
+
+	res_free(dev, fh);
+
+	if (!dev->users) {
+		tm6000_uninit_isoc(dev);
+
+		/* Stop interrupt USB pipe */
+		tm6000_ir_int_stop(dev);
+
+		usb_reset_configuration(dev->udev);
+
+		if (dev->int_in.endp)
+			usb_set_interface(dev->udev,
+					dev->isoc_in.bInterfaceNumber, 2);
+		else
+			usb_set_interface(dev->udev,
+					dev->isoc_in.bInterfaceNumber, 0);
+
+		/* Start interrupt USB pipe */
+		tm6000_ir_int_start(dev);
+
+		if (!fh->radio)
+			videobuf_mmap_free(&fh->vb_vidq);
+	}
+	v4l2_fh_del(&fh->fh);
+	v4l2_fh_exit(&fh->fh);
+	kfree(fh);
+	mutex_unlock(&dev->lock);
+
+	return 0;
+}
+
+static int tm6000_mmap(struct file *file, struct vm_area_struct * vma)
+{
+	struct tm6000_fh *fh = file->private_data;
+	struct tm6000_core *dev = fh->dev;
+	int res;
+
+	if (mutex_lock_interruptible(&dev->lock))
+		return -ERESTARTSYS;
+	res = videobuf_mmap_mapper(&fh->vb_vidq, vma);
+	mutex_unlock(&dev->lock);
+	return res;
+}
+
+static struct v4l2_file_operations tm6000_fops = {
+	.owner = THIS_MODULE,
+	.open = tm6000_open,
+	.release = tm6000_release,
+	.unlocked_ioctl = video_ioctl2, /* V4L2 ioctl handler */
+	.read = tm6000_read,
+	.poll = tm6000_poll,
+	.mmap = tm6000_mmap,
+};
+
+static const struct v4l2_ioctl_ops video_ioctl_ops = {
+	.vidioc_querycap          = vidioc_querycap,
+	.vidioc_enum_fmt_vid_cap  = vidioc_enum_fmt_vid_cap,
+	.vidioc_g_fmt_vid_cap     = vidioc_g_fmt_vid_cap,
+	.vidioc_try_fmt_vid_cap   = vidioc_try_fmt_vid_cap,
+	.vidioc_s_fmt_vid_cap     = vidioc_s_fmt_vid_cap,
+	.vidioc_s_std             = vidioc_s_std,
+	.vidioc_g_std             = vidioc_g_std,
+	.vidioc_enum_input        = vidioc_enum_input,
+	.vidioc_g_input           = vidioc_g_input,
+	.vidioc_s_input           = vidioc_s_input,
+	.vidioc_g_tuner           = vidioc_g_tuner,
+	.vidioc_s_tuner           = vidioc_s_tuner,
+	.vidioc_g_frequency       = vidioc_g_frequency,
+	.vidioc_s_frequency       = vidioc_s_frequency,
+	.vidioc_streamon          = vidioc_streamon,
+	.vidioc_streamoff         = vidioc_streamoff,
+	.vidioc_reqbufs           = vidioc_reqbufs,
+	.vidioc_querybuf          = vidioc_querybuf,
+	.vidioc_qbuf              = vidioc_qbuf,
+	.vidioc_dqbuf             = vidioc_dqbuf,
+	.vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
+	.vidioc_unsubscribe_event = v4l2_event_unsubscribe,
+};
+
+static struct video_device tm6000_template = {
+	.name		= "tm6000",
+	.fops           = &tm6000_fops,
+	.ioctl_ops      = &video_ioctl_ops,
+	.release	= video_device_release_empty,
+	.tvnorms        = TM6000_STD,
+};
+
+static const struct v4l2_file_operations radio_fops = {
+	.owner		= THIS_MODULE,
+	.open		= tm6000_open,
+	.poll		= v4l2_ctrl_poll,
+	.release	= tm6000_release,
+	.unlocked_ioctl	= video_ioctl2,
+};
+
+static const struct v4l2_ioctl_ops radio_ioctl_ops = {
+	.vidioc_querycap	= vidioc_querycap,
+	.vidioc_g_tuner		= radio_g_tuner,
+	.vidioc_s_tuner		= radio_s_tuner,
+	.vidioc_g_frequency	= vidioc_g_frequency,
+	.vidioc_s_frequency	= vidioc_s_frequency,
+	.vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
+	.vidioc_unsubscribe_event = v4l2_event_unsubscribe,
+};
+
+static struct video_device tm6000_radio_template = {
+	.name			= "tm6000",
+	.fops			= &radio_fops,
+	.ioctl_ops		= &radio_ioctl_ops,
+};
+
+/* -----------------------------------------------------------------
+ *	Initialization and module stuff
+ * ------------------------------------------------------------------
+ */
+
+static void vdev_init(struct tm6000_core *dev,
+		struct video_device *vfd,
+		const struct video_device
+		*template, const char *type_name)
+{
+	*vfd = *template;
+	vfd->v4l2_dev = &dev->v4l2_dev;
+	vfd->release = video_device_release_empty;
+	vfd->lock = &dev->lock;
+
+	snprintf(vfd->name, sizeof(vfd->name), "%s %s", dev->name, type_name);
+
+	video_set_drvdata(vfd, dev);
+}
+
+int tm6000_v4l2_register(struct tm6000_core *dev)
+{
+	int ret = 0;
+
+	v4l2_ctrl_handler_init(&dev->ctrl_handler, 6);
+	v4l2_ctrl_handler_init(&dev->radio_ctrl_handler, 2);
+	v4l2_ctrl_new_std(&dev->radio_ctrl_handler, &tm6000_radio_ctrl_ops,
+			V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0);
+	v4l2_ctrl_new_std(&dev->radio_ctrl_handler, &tm6000_radio_ctrl_ops,
+			V4L2_CID_AUDIO_VOLUME, -15, 15, 1, 0);
+	v4l2_ctrl_new_std(&dev->ctrl_handler, &tm6000_ctrl_ops,
+			V4L2_CID_BRIGHTNESS, 0, 255, 1, 54);
+	v4l2_ctrl_new_std(&dev->ctrl_handler, &tm6000_ctrl_ops,
+			V4L2_CID_CONTRAST, 0, 255, 1, 119);
+	v4l2_ctrl_new_std(&dev->ctrl_handler, &tm6000_ctrl_ops,
+			V4L2_CID_SATURATION, 0, 255, 1, 112);
+	v4l2_ctrl_new_std(&dev->ctrl_handler, &tm6000_ctrl_ops,
+			V4L2_CID_HUE, -128, 127, 1, 0);
+	v4l2_ctrl_add_handler(&dev->ctrl_handler,
+			&dev->radio_ctrl_handler, NULL);
+
+	if (dev->radio_ctrl_handler.error)
+		ret = dev->radio_ctrl_handler.error;
+	if (!ret && dev->ctrl_handler.error)
+		ret = dev->ctrl_handler.error;
+	if (ret)
+		goto free_ctrl;
+
+	vdev_init(dev, &dev->vfd, &tm6000_template, "video");
+
+	dev->vfd.ctrl_handler = &dev->ctrl_handler;
+
+	/* init video dma queues */
+	INIT_LIST_HEAD(&dev->vidq.active);
+	INIT_LIST_HEAD(&dev->vidq.queued);
+
+	ret = video_register_device(&dev->vfd, VFL_TYPE_GRABBER, video_nr);
+
+	if (ret < 0) {
+		printk(KERN_INFO "%s: can't register video device\n",
+		       dev->name);
+		goto free_ctrl;
+	}
+
+	printk(KERN_INFO "%s: registered device %s\n",
+	       dev->name, video_device_node_name(&dev->vfd));
+
+	if (dev->caps.has_radio) {
+		vdev_init(dev, &dev->radio_dev, &tm6000_radio_template,
+							   "radio");
+		dev->radio_dev.ctrl_handler = &dev->radio_ctrl_handler;
+		ret = video_register_device(&dev->radio_dev, VFL_TYPE_RADIO,
+					    radio_nr);
+		if (ret < 0) {
+			printk(KERN_INFO "%s: can't register radio device\n",
+			       dev->name);
+			goto unreg_video;
+		}
+
+		printk(KERN_INFO "%s: registered device %s\n",
+		       dev->name, video_device_node_name(&dev->radio_dev));
+	}
+
+	printk(KERN_INFO "Trident TVMaster TM5600/TM6000/TM6010 USB2 board (Load status: %d)\n", ret);
+	return ret;
+
+unreg_video:
+	video_unregister_device(&dev->vfd);
+free_ctrl:
+	v4l2_ctrl_handler_free(&dev->ctrl_handler);
+	v4l2_ctrl_handler_free(&dev->radio_ctrl_handler);
+	return ret;
+}
+
+int tm6000_v4l2_unregister(struct tm6000_core *dev)
+{
+	video_unregister_device(&dev->vfd);
+
+	/* if URB buffers are still allocated free them now */
+	tm6000_free_urb_buffers(dev);
+
+	video_unregister_device(&dev->radio_dev);
+	return 0;
+}
+
+int tm6000_v4l2_exit(void)
+{
+	return 0;
+}
+
+module_param(video_nr, int, 0);
+MODULE_PARM_DESC(video_nr, "Allow changing video device number");
+
+module_param_named(debug, tm6000_debug, int, 0444);
+MODULE_PARM_DESC(debug, "activates debug info");
+
+module_param(vid_limit, int, 0644);
+MODULE_PARM_DESC(vid_limit, "capture memory limit in megabytes");
+
+module_param(keep_urb, bool, 0);
+MODULE_PARM_DESC(keep_urb, "Keep urb buffers allocated even when the device is closed by the user");
diff --git a/kernel/drivers/media/usb/tm6000/tm6000.h b/kernel/drivers/media/usb/tm6000/tm6000.h
new file mode 100644
index 000000000..f21279447
--- /dev/null
+++ b/kernel/drivers/media/usb/tm6000/tm6000.h
@@ -0,0 +1,409 @@
+/*
+ *  tm6000.h - driver for TM5600/TM6000/TM6010 USB video capture devices
+ *
+ *  Copyright (C) 2006-2007 Mauro Carvalho Chehab <mchehab@infradead.org>
+ *
+ *  Copyright (C) 2007 Michel Ludwig <michel.ludwig@gmail.com>
+ *	- DVB-T support
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation version 2
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/videodev2.h>
+#include <media/v4l2-common.h>
+#include <media/videobuf-vmalloc.h>
+#include "tm6000-usb-isoc.h"
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-fh.h>
+
+#include <linux/dvb/frontend.h>
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dmxdev.h"
+
+/* Inputs */
+enum tm6000_itype {
+	TM6000_INPUT_TV	= 1,
+	TM6000_INPUT_COMPOSITE1,
+	TM6000_INPUT_COMPOSITE2,
+	TM6000_INPUT_SVIDEO,
+	TM6000_INPUT_DVB,
+	TM6000_INPUT_RADIO,
+};
+
+enum tm6000_mux {
+	TM6000_VMUX_VIDEO_A = 1,
+	TM6000_VMUX_VIDEO_B,
+	TM6000_VMUX_VIDEO_AB,
+	TM6000_AMUX_ADC1,
+	TM6000_AMUX_ADC2,
+	TM6000_AMUX_SIF1,
+	TM6000_AMUX_SIF2,
+	TM6000_AMUX_I2S,
+};
+
+enum tm6000_devtype {
+	TM6000 = 0,
+	TM5600,
+	TM6010,
+};
+
+struct tm6000_input {
+	enum tm6000_itype	type;
+	enum tm6000_mux		vmux;
+	enum tm6000_mux		amux;
+	unsigned int		v_gpio;
+	unsigned int		a_gpio;
+};
+
+/* ------------------------------------------------------------------
+ *	Basic structures
+ * ------------------------------------------------------------------
+ */
+
+struct tm6000_fmt {
+	char  *name;
+	u32   fourcc;          /* v4l2 format id */
+	int   depth;
+};
+
+/* buffer for one video frame */
+struct tm6000_buffer {
+	/* common v4l buffer stuff -- must be first */
+	struct videobuf_buffer vb;
+
+	struct tm6000_fmt      *fmt;
+};
+
+struct tm6000_dmaqueue {
+	struct list_head       active;
+	struct list_head       queued;
+
+	/* thread for generating video stream*/
+	struct task_struct         *kthread;
+	wait_queue_head_t          wq;
+	/* Counters to control fps rate */
+	int                        frame;
+	int                        ini_jiffies;
+};
+
+/* device states */
+enum tm6000_core_state {
+	DEV_INITIALIZED   = 0x01,
+	DEV_DISCONNECTED  = 0x02,
+	DEV_MISCONFIGURED = 0x04,
+};
+
+/* io methods */
+enum tm6000_io_method {
+	IO_NONE,
+	IO_READ,
+	IO_MMAP,
+};
+
+enum tm6000_mode {
+	TM6000_MODE_UNKNOWN = 0,
+	TM6000_MODE_ANALOG,
+	TM6000_MODE_DIGITAL,
+};
+
+struct tm6000_gpio {
+	int		tuner_reset;
+	int		tuner_on;
+	int		demod_reset;
+	int		demod_on;
+	int		power_led;
+	int		dvb_led;
+	int		ir;
+};
+
+struct tm6000_capabilities {
+	unsigned int    has_tuner:1;
+	unsigned int    has_tda9874:1;
+	unsigned int    has_dvb:1;
+	unsigned int    has_zl10353:1;
+	unsigned int    has_eeprom:1;
+	unsigned int    has_remote:1;
+	unsigned int    has_radio:1;
+};
+
+struct tm6000_dvb {
+	struct dvb_adapter	adapter;
+	struct dvb_demux	demux;
+	struct dvb_frontend	*frontend;
+	struct dmxdev		dmxdev;
+	unsigned int		streams;
+	struct urb		*bulk_urb;
+	struct mutex		mutex;
+};
+
+struct snd_tm6000_card {
+	struct snd_card			*card;
+	spinlock_t			reg_lock;
+	struct tm6000_core		*core;
+	struct snd_pcm_substream	*substream;
+
+	/* temporary data for buffer fill processing */
+	unsigned			buf_pos;
+	unsigned			period_pos;
+};
+
+struct tm6000_endpoint {
+	struct usb_host_endpoint	*endp;
+	__u8				bInterfaceNumber;
+	__u8				bAlternateSetting;
+	unsigned			maxsize;
+};
+
+#define TM6000_QUIRK_NO_USB_DELAY (1 << 0)
+
+struct tm6000_core {
+	/* generic device properties */
+	char				name[30];	/* name (including minor) of the device */
+	int				model;		/* index in the device_data struct */
+	int				devno;		/* marks the number of this device */
+	enum tm6000_devtype		dev_type;	/* type of device */
+	unsigned char			eedata[256];	/* Eeprom data */
+	unsigned			eedata_size;	/* Size of the eeprom info */
+
+	v4l2_std_id                     norm;           /* Current norm */
+	int				width, height;	/* Selected resolution */
+
+	enum tm6000_core_state		state;
+
+	/* Device Capabilities*/
+	struct tm6000_capabilities	caps;
+
+	/* Used to load alsa/dvb */
+        struct work_struct		request_module_wk;
+
+	/* Tuner configuration */
+	int				tuner_type;		/* type of the tuner */
+	int				tuner_addr;		/* tuner address */
+
+	struct tm6000_gpio		gpio;
+
+	char				*ir_codes;
+
+	__u8				radio;
+
+	/* Demodulator configuration */
+	int				demod_addr;	/* demodulator address */
+
+	int				audio_bitrate;
+	/* i2c i/o */
+	struct i2c_adapter		i2c_adap;
+	struct i2c_client		i2c_client;
+
+
+	/* extension */
+	struct list_head		devlist;
+
+	/* video for linux */
+	int				users;
+
+	/* various device info */
+	struct tm6000_fh		*resources;	/* Points to fh that is streaming */
+	bool				is_res_read;
+
+	struct video_device		vfd;
+	struct video_device		radio_dev;
+	struct tm6000_dmaqueue		vidq;
+	struct v4l2_device		v4l2_dev;
+	struct v4l2_ctrl_handler	ctrl_handler;
+	struct v4l2_ctrl_handler	radio_ctrl_handler;
+
+	int				input;
+	struct tm6000_input		vinput[3];	/* video input */
+	struct tm6000_input		rinput;		/* radio input */
+
+	int				freq;
+	unsigned int			fourcc;
+
+	enum tm6000_mode		mode;
+
+	int				ctl_mute;             /* audio */
+	int				ctl_volume;
+	int				amode;
+
+	/* DVB-T support */
+	struct tm6000_dvb		*dvb;
+
+	/* audio support */
+	struct snd_tm6000_card		*adev;
+	struct work_struct		wq_trigger;   /* Trigger to start/stop audio for alsa module */
+	atomic_t			stream_started;  /* stream should be running if true */
+
+	struct tm6000_IR		*ir;
+
+	/* locks */
+	struct mutex			lock;
+	struct mutex			usb_lock;
+
+	/* usb transfer */
+	struct usb_device		*udev;		/* the usb device */
+
+	struct tm6000_endpoint		bulk_in, bulk_out, isoc_in, isoc_out;
+	struct tm6000_endpoint		int_in, int_out;
+
+	/* scaler!=0 if scaler is active*/
+	int				scaler;
+
+		/* Isoc control struct */
+	struct usb_isoc_ctl          isoc_ctl;
+
+	spinlock_t                   slock;
+
+	/* urb dma buffers */
+	char				**urb_buffer;
+	dma_addr_t			*urb_dma;
+	unsigned int			urb_size;
+
+	unsigned long quirks;
+};
+
+enum tm6000_ops_type {
+	TM6000_AUDIO = 0x10,
+	TM6000_DVB = 0x20,
+};
+
+struct tm6000_ops {
+	struct list_head	next;
+	char			*name;
+	enum tm6000_ops_type	type;
+	int (*init)(struct tm6000_core *);
+	int (*fini)(struct tm6000_core *);
+	int (*fillbuf)(struct tm6000_core *, char *buf, int size);
+};
+
+struct tm6000_fh {
+	struct v4l2_fh		     fh;
+	struct tm6000_core           *dev;
+	unsigned int                 radio;
+
+	/* video capture */
+	struct tm6000_fmt            *fmt;
+	unsigned int                 width, height;
+	struct videobuf_queue        vb_vidq;
+
+	enum v4l2_buf_type           type;
+};
+
+#define TM6000_STD	(V4L2_STD_PAL|V4L2_STD_PAL_N|V4L2_STD_PAL_Nc|    \
+			V4L2_STD_PAL_M|V4L2_STD_PAL_60|V4L2_STD_NTSC_M| \
+			V4L2_STD_NTSC_M_JP|V4L2_STD_SECAM)
+
+/* In tm6000-cards.c */
+
+int tm6000_tuner_callback(void *ptr, int component, int command, int arg);
+int tm6000_xc5000_callback(void *ptr, int component, int command, int arg);
+int tm6000_cards_setup(struct tm6000_core *dev);
+void tm6000_flash_led(struct tm6000_core *dev, u8 state);
+
+/* In tm6000-core.c */
+
+int tm6000_read_write_usb(struct tm6000_core *dev, u8 reqtype, u8 req,
+			   u16 value, u16 index, u8 *buf, u16 len);
+int tm6000_get_reg(struct tm6000_core *dev, u8 req, u16 value, u16 index);
+int tm6000_get_reg16(struct tm6000_core *dev, u8 req, u16 value, u16 index);
+int tm6000_get_reg32(struct tm6000_core *dev, u8 req, u16 value, u16 index);
+int tm6000_set_reg(struct tm6000_core *dev, u8 req, u16 value, u16 index);
+int tm6000_set_reg_mask(struct tm6000_core *dev, u8 req, u16 value,
+						u16 index, u16 mask);
+int tm6000_i2c_reset(struct tm6000_core *dev, u16 tsleep);
+int tm6000_init(struct tm6000_core *dev);
+int tm6000_reset(struct tm6000_core *dev);
+
+int tm6000_init_analog_mode(struct tm6000_core *dev);
+int tm6000_init_digital_mode(struct tm6000_core *dev);
+int tm6000_set_audio_bitrate(struct tm6000_core *dev, int bitrate);
+int tm6000_set_audio_rinput(struct tm6000_core *dev);
+int tm6000_tvaudio_set_mute(struct tm6000_core *dev, u8 mute);
+void tm6000_set_volume(struct tm6000_core *dev, int vol);
+
+int tm6000_v4l2_register(struct tm6000_core *dev);
+int tm6000_v4l2_unregister(struct tm6000_core *dev);
+int tm6000_v4l2_exit(void);
+void tm6000_set_fourcc_format(struct tm6000_core *dev);
+
+void tm6000_remove_from_devlist(struct tm6000_core *dev);
+void tm6000_add_into_devlist(struct tm6000_core *dev);
+int tm6000_register_extension(struct tm6000_ops *ops);
+void tm6000_unregister_extension(struct tm6000_ops *ops);
+void tm6000_init_extension(struct tm6000_core *dev);
+void tm6000_close_extension(struct tm6000_core *dev);
+int tm6000_call_fillbuf(struct tm6000_core *dev, enum tm6000_ops_type type,
+			char *buf, int size);
+
+
+/* In tm6000-stds.c */
+void tm6000_get_std_res(struct tm6000_core *dev);
+int tm6000_set_standard(struct tm6000_core *dev);
+
+/* In tm6000-i2c.c */
+int tm6000_i2c_register(struct tm6000_core *dev);
+int tm6000_i2c_unregister(struct tm6000_core *dev);
+
+/* In tm6000-queue.c */
+
+int tm6000_v4l2_mmap(struct file *filp, struct vm_area_struct *vma);
+
+int tm6000_vidioc_streamon(struct file *file, void *priv,
+			   enum v4l2_buf_type i);
+int tm6000_vidioc_streamoff(struct file *file, void *priv,
+			    enum v4l2_buf_type i);
+int tm6000_vidioc_reqbufs(struct file *file, void *priv,
+			  struct v4l2_requestbuffers *rb);
+int tm6000_vidioc_querybuf(struct file *file, void *priv,
+			   struct v4l2_buffer *b);
+int tm6000_vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *b);
+int tm6000_vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b);
+ssize_t tm6000_v4l2_read(struct file *filp, char __user * buf, size_t count,
+			 loff_t *f_pos);
+unsigned int tm6000_v4l2_poll(struct file *file,
+			      struct poll_table_struct *wait);
+int tm6000_queue_init(struct tm6000_core *dev);
+
+/* In tm6000-alsa.c */
+/*int tm6000_audio_init(struct tm6000_core *dev, int idx);*/
+
+/* In tm6000-input.c */
+int tm6000_ir_init(struct tm6000_core *dev);
+int tm6000_ir_fini(struct tm6000_core *dev);
+void tm6000_ir_wait(struct tm6000_core *dev, u8 state);
+int tm6000_ir_int_start(struct tm6000_core *dev);
+void tm6000_ir_int_stop(struct tm6000_core *dev);
+
+/* Debug stuff */
+
+extern int tm6000_debug;
+
+#define dprintk(dev, level, fmt, arg...) do {\
+	if (tm6000_debug & level) \
+		printk(KERN_INFO "(%lu) %s %s :"fmt, jiffies, \
+			 dev->name, __func__ , ##arg); } while (0)
+
+#define V4L2_DEBUG_REG		0x0004
+#define V4L2_DEBUG_I2C		0x0008
+#define V4L2_DEBUG_QUEUE	0x0010
+#define V4L2_DEBUG_ISOC		0x0020
+#define V4L2_DEBUG_RES_LOCK	0x0040	/* Resource locking */
+#define V4L2_DEBUG_OPEN		0x0080	/* video open/close debug */
+
+#define tm6000_err(fmt, arg...) do {\
+	printk(KERN_ERR "tm6000 %s :"fmt, \
+		__func__ , ##arg); } while (0)