diff options
author | 2016-04-11 10:41:07 +0300 | |
---|---|---|
committer | 2016-04-13 08:17:18 +0300 | |
commit | e09b41010ba33a20a87472ee821fa407a5b8da36 (patch) | |
tree | d10dc367189862e7ca5c592f033dc3726e1df4e3 /kernel/drivers/media/common/b2c2/flexcop-fe-tuner.c | |
parent | f93b97fd65072de626c074dbe099a1fff05ce060 (diff) |
These changes are the raw update to linux-4.4.6-rt14. Kernel sources
are taken from kernel.org, and rt patch from the rt wiki download page.
During the rebasing, the following patch collided:
Force tick interrupt and get rid of softirq magic(I70131fb85).
Collisions have been removed because its logic was found on the
source already.
Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>
Diffstat (limited to 'kernel/drivers/media/common/b2c2/flexcop-fe-tuner.c')
-rw-r--r-- | kernel/drivers/media/common/b2c2/flexcop-fe-tuner.c | 63 |
1 files changed, 53 insertions, 10 deletions
diff --git a/kernel/drivers/media/common/b2c2/flexcop-fe-tuner.c b/kernel/drivers/media/common/b2c2/flexcop-fe-tuner.c index 7e14e90d2..9c59f4306 100644 --- a/kernel/drivers/media/common/b2c2/flexcop-fe-tuner.c +++ b/kernel/drivers/media/common/b2c2/flexcop-fe-tuner.c @@ -12,6 +12,7 @@ #include "cx24113.h" #include "cx24123.h" #include "isl6421.h" +#include "cx24120.h" #include "mt352.h" #include "bcm3510.h" #include "nxt200x.h" @@ -26,9 +27,20 @@ #define FE_SUPPORTED(fe) (defined(CONFIG_DVB_##fe) || \ (defined(CONFIG_DVB_##fe##_MODULE) && defined(MODULE))) +#if FE_SUPPORTED(BCM3510) || (FE_SUPPORTED(CX24120) && FE_SUPPORTED(ISL6421)) +static int flexcop_fe_request_firmware(struct dvb_frontend *fe, + const struct firmware **fw, char *name) +{ + struct flexcop_device *fc = fe->dvb->priv; + + return request_firmware(fw, name, fc->dev); +} +#endif + /* lnb control */ #if FE_SUPPORTED(MT312) || FE_SUPPORTED(STV0299) -static int flexcop_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) +static int flexcop_set_voltage(struct dvb_frontend *fe, + enum fe_sec_voltage voltage) { struct flexcop_device *fc = fe->dvb->priv; flexcop_ibi_value v; @@ -67,7 +79,7 @@ static int flexcop_sleep(struct dvb_frontend* fe) /* SkyStar2 DVB-S rev 2.3 */ #if FE_SUPPORTED(MT312) && FE_SUPPORTED(PLL) -static int flexcop_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone) +static int flexcop_set_tone(struct dvb_frontend *fe, enum fe_sec_tone_mode tone) { /* u16 wz_half_period_for_45_mhz[] = { 0x01ff, 0x0154, 0x00ff, 0x00cc }; */ struct flexcop_device *fc = fe->dvb->priv; @@ -146,7 +158,7 @@ static int flexcop_diseqc_send_master_cmd(struct dvb_frontend *fe, } static int flexcop_diseqc_send_burst(struct dvb_frontend *fe, - fe_sec_mini_cmd_t minicmd) + enum fe_sec_mini_cmd minicmd) { return flexcop_send_diseqc_msg(fe, 0, NULL, minicmd); } @@ -445,13 +457,6 @@ static int airstar_dvbt_attach(struct flexcop_device *fc, /* AirStar ATSC 1st generation */ #if FE_SUPPORTED(BCM3510) -static int flexcop_fe_request_firmware(struct dvb_frontend *fe, - const struct firmware **fw, char* name) -{ - struct flexcop_device *fc = fe->dvb->priv; - return request_firmware(fw, name, fc->dev); -} - static struct bcm3510_config air2pc_atsc_first_gen_config = { .demod_address = 0x0f, .request_firmware = flexcop_fe_request_firmware, @@ -619,6 +624,43 @@ fail: #define cablestar2_attach NULL #endif +/* SkyStar S2 PCI DVB-S/S2 card based on Conexant cx24120/cx24118 */ +#if FE_SUPPORTED(CX24120) && FE_SUPPORTED(ISL6421) +static const struct cx24120_config skystar2_rev3_3_cx24120_config = { + .i2c_addr = 0x55, + .xtal_khz = 10111, + .initial_mpeg_config = { 0xa1, 0x76, 0x07 }, + .request_firmware = flexcop_fe_request_firmware, + .i2c_wr_max = 4, +}; + +static int skystarS2_rev33_attach(struct flexcop_device *fc, + struct i2c_adapter *i2c) +{ + fc->fe = dvb_attach(cx24120_attach, + &skystar2_rev3_3_cx24120_config, i2c); + if (!fc->fe) + return 0; + + fc->dev_type = FC_SKYS2_REV33; + fc->fc_i2c_adap[2].no_base_addr = 1; + if (!dvb_attach(isl6421_attach, fc->fe, &fc->fc_i2c_adap[2].i2c_adap, + 0x08, 0, 0, false)) { + err("ISL6421 could NOT be attached!"); + fc->fc_i2c_adap[2].no_base_addr = 0; + return 0; + } + info("ISL6421 successfully attached."); + + if (fc->has_32_hw_pid_filter) + fc->skip_6_hw_pid_filter = 1; + + return 1; +} +#else +#define skystarS2_rev33_attach NULL +#endif + static struct { flexcop_device_type_t type; int (*attach)(struct flexcop_device *, struct i2c_adapter *); @@ -632,6 +674,7 @@ static struct { { FC_AIR_ATSC1, airstar_atsc1_attach }, { FC_CABLE, cablestar2_attach }, { FC_SKY_REV23, skystar2_rev23_attach }, + { FC_SKYS2_REV33, skystarS2_rev33_attach }, }; /* try to figure out the frontend */ |