summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/md/dm-raid.c
diff options
context:
space:
mode:
authorJosé Pekkarinen <jose.pekkarinen@nokia.com>2016-04-11 10:41:07 +0300
committerJosé Pekkarinen <jose.pekkarinen@nokia.com>2016-04-13 08:17:18 +0300
commite09b41010ba33a20a87472ee821fa407a5b8da36 (patch)
treed10dc367189862e7ca5c592f033dc3726e1df4e3 /kernel/drivers/md/dm-raid.c
parentf93b97fd65072de626c074dbe099a1fff05ce060 (diff)
These changes are the raw update to linux-4.4.6-rt14. Kernel sources
are taken from kernel.org, and rt patch from the rt wiki download page. During the rebasing, the following patch collided: Force tick interrupt and get rid of softirq magic(I70131fb85). Collisions have been removed because its logic was found on the source already. Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769 Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>
Diffstat (limited to 'kernel/drivers/md/dm-raid.c')
-rw-r--r--kernel/drivers/md/dm-raid.c209
1 files changed, 112 insertions, 97 deletions
diff --git a/kernel/drivers/md/dm-raid.c b/kernel/drivers/md/dm-raid.c
index 88e4c7f24..a0901214a 100644
--- a/kernel/drivers/md/dm-raid.c
+++ b/kernel/drivers/md/dm-raid.c
@@ -1,6 +1,6 @@
/*
* Copyright (C) 2010-2011 Neil Brown
- * Copyright (C) 2010-2014 Red Hat, Inc. All rights reserved.
+ * Copyright (C) 2010-2015 Red Hat, Inc. All rights reserved.
*
* This file is released under the GPL.
*/
@@ -17,6 +17,7 @@
#include <linux/device-mapper.h>
#define DM_MSG_PREFIX "raid"
+#define MAX_RAID_DEVICES 253 /* raid4/5/6 limit */
static bool devices_handle_discard_safely = false;
@@ -45,25 +46,25 @@ struct raid_dev {
};
/*
- * Flags for rs->print_flags field.
+ * Flags for rs->ctr_flags field.
*/
-#define DMPF_SYNC 0x1
-#define DMPF_NOSYNC 0x2
-#define DMPF_REBUILD 0x4
-#define DMPF_DAEMON_SLEEP 0x8
-#define DMPF_MIN_RECOVERY_RATE 0x10
-#define DMPF_MAX_RECOVERY_RATE 0x20
-#define DMPF_MAX_WRITE_BEHIND 0x40
-#define DMPF_STRIPE_CACHE 0x80
-#define DMPF_REGION_SIZE 0x100
-#define DMPF_RAID10_COPIES 0x200
-#define DMPF_RAID10_FORMAT 0x400
+#define CTR_FLAG_SYNC 0x1
+#define CTR_FLAG_NOSYNC 0x2
+#define CTR_FLAG_REBUILD 0x4
+#define CTR_FLAG_DAEMON_SLEEP 0x8
+#define CTR_FLAG_MIN_RECOVERY_RATE 0x10
+#define CTR_FLAG_MAX_RECOVERY_RATE 0x20
+#define CTR_FLAG_MAX_WRITE_BEHIND 0x40
+#define CTR_FLAG_STRIPE_CACHE 0x80
+#define CTR_FLAG_REGION_SIZE 0x100
+#define CTR_FLAG_RAID10_COPIES 0x200
+#define CTR_FLAG_RAID10_FORMAT 0x400
struct raid_set {
struct dm_target *ti;
uint32_t bitmap_loaded;
- uint32_t print_flags;
+ uint32_t ctr_flags;
struct mddev md;
struct raid_type *raid_type;
@@ -81,6 +82,7 @@ static struct raid_type {
const unsigned level; /* RAID level. */
const unsigned algorithm; /* RAID algorithm. */
} raid_types[] = {
+ {"raid0", "RAID0 (striping)", 0, 2, 0, 0 /* NONE */},
{"raid1", "RAID1 (mirroring)", 0, 2, 1, 0 /* NONE */},
{"raid10", "RAID10 (striped mirrors)", 0, 2, 10, UINT_MAX /* Varies */},
{"raid4", "RAID4 (dedicated parity disk)", 1, 2, 5, ALGORITHM_PARITY_0},
@@ -119,15 +121,15 @@ static int raid10_format_to_md_layout(char *format, unsigned copies)
{
unsigned n = 1, f = 1;
- if (!strcmp("near", format))
+ if (!strcasecmp("near", format))
n = copies;
else
f = copies;
- if (!strcmp("offset", format))
+ if (!strcasecmp("offset", format))
return 0x30000 | (f << 8) | n;
- if (!strcmp("far", format))
+ if (!strcasecmp("far", format))
return 0x20000 | (f << 8) | n;
return (f << 8) | n;
@@ -327,8 +329,7 @@ static int validate_region_size(struct raid_set *rs, unsigned long region_size)
*/
if (min_region_size > (1 << 13)) {
/* If not a power of 2, make it the next power of 2 */
- if (min_region_size & (min_region_size - 1))
- region_size = 1 << fls(region_size);
+ region_size = roundup_pow_of_two(min_region_size);
DMINFO("Choosing default region size of %lu sectors",
region_size);
} else {
@@ -477,8 +478,6 @@ too_many:
* will form the "stripe"
* [[no]sync] Force or prevent recovery of the
* entire array
- * [devices_handle_discard_safely] Allow discards on RAID4/5/6; useful if RAID
- * member device(s) properly support TRIM/UNMAP
* [rebuild <idx>] Rebuild the drive indicated by the index
* [daemon_sleep <ms>] Time between bitmap daemon work to
* clear bits
@@ -555,12 +554,12 @@ static int parse_raid_params(struct raid_set *rs, char **argv,
for (i = 0; i < num_raid_params; i++) {
if (!strcasecmp(argv[i], "nosync")) {
rs->md.recovery_cp = MaxSector;
- rs->print_flags |= DMPF_NOSYNC;
+ rs->ctr_flags |= CTR_FLAG_NOSYNC;
continue;
}
if (!strcasecmp(argv[i], "sync")) {
rs->md.recovery_cp = 0;
- rs->print_flags |= DMPF_SYNC;
+ rs->ctr_flags |= CTR_FLAG_SYNC;
continue;
}
@@ -585,7 +584,7 @@ static int parse_raid_params(struct raid_set *rs, char **argv,
return -EINVAL;
}
raid10_format = argv[i];
- rs->print_flags |= DMPF_RAID10_FORMAT;
+ rs->ctr_flags |= CTR_FLAG_RAID10_FORMAT;
continue;
}
@@ -602,7 +601,7 @@ static int parse_raid_params(struct raid_set *rs, char **argv,
}
clear_bit(In_sync, &rs->dev[value].rdev.flags);
rs->dev[value].rdev.recovery_offset = 0;
- rs->print_flags |= DMPF_REBUILD;
+ rs->ctr_flags |= CTR_FLAG_REBUILD;
} else if (!strcasecmp(key, "write_mostly")) {
if (rs->raid_type->level != 1) {
rs->ti->error = "write_mostly option is only valid for RAID1";
@@ -618,7 +617,7 @@ static int parse_raid_params(struct raid_set *rs, char **argv,
rs->ti->error = "max_write_behind option is only valid for RAID1";
return -EINVAL;
}
- rs->print_flags |= DMPF_MAX_WRITE_BEHIND;
+ rs->ctr_flags |= CTR_FLAG_MAX_WRITE_BEHIND;
/*
* In device-mapper, we specify things in sectors, but
@@ -631,14 +630,14 @@ static int parse_raid_params(struct raid_set *rs, char **argv,
}
rs->md.bitmap_info.max_write_behind = value;
} else if (!strcasecmp(key, "daemon_sleep")) {
- rs->print_flags |= DMPF_DAEMON_SLEEP;
+ rs->ctr_flags |= CTR_FLAG_DAEMON_SLEEP;
if (!value || (value > MAX_SCHEDULE_TIMEOUT)) {
rs->ti->error = "daemon sleep period out of range";
return -EINVAL;
}
rs->md.bitmap_info.daemon_sleep = value;
} else if (!strcasecmp(key, "stripe_cache")) {
- rs->print_flags |= DMPF_STRIPE_CACHE;
+ rs->ctr_flags |= CTR_FLAG_STRIPE_CACHE;
/*
* In device-mapper, we specify things in sectors, but
@@ -656,21 +655,21 @@ static int parse_raid_params(struct raid_set *rs, char **argv,
return -EINVAL;
}
} else if (!strcasecmp(key, "min_recovery_rate")) {
- rs->print_flags |= DMPF_MIN_RECOVERY_RATE;
+ rs->ctr_flags |= CTR_FLAG_MIN_RECOVERY_RATE;
if (value > INT_MAX) {
rs->ti->error = "min_recovery_rate out of range";
return -EINVAL;
}
rs->md.sync_speed_min = (int)value;
} else if (!strcasecmp(key, "max_recovery_rate")) {
- rs->print_flags |= DMPF_MAX_RECOVERY_RATE;
+ rs->ctr_flags |= CTR_FLAG_MAX_RECOVERY_RATE;
if (value > INT_MAX) {
rs->ti->error = "max_recovery_rate out of range";
return -EINVAL;
}
rs->md.sync_speed_max = (int)value;
} else if (!strcasecmp(key, "region_size")) {
- rs->print_flags |= DMPF_REGION_SIZE;
+ rs->ctr_flags |= CTR_FLAG_REGION_SIZE;
region_size = value;
} else if (!strcasecmp(key, "raid10_copies") &&
(rs->raid_type->level == 10)) {
@@ -678,7 +677,7 @@ static int parse_raid_params(struct raid_set *rs, char **argv,
rs->ti->error = "Bad value for 'raid10_copies'";
return -EINVAL;
}
- rs->print_flags |= DMPF_RAID10_COPIES;
+ rs->ctr_flags |= CTR_FLAG_RAID10_COPIES;
raid10_copies = value;
} else {
DMERR("Unable to parse RAID parameter: %s", key);
@@ -720,7 +719,7 @@ static int parse_raid_params(struct raid_set *rs, char **argv,
rs->md.layout = raid10_format_to_md_layout(raid10_format,
raid10_copies);
rs->md.new_layout = rs->md.layout;
- } else if ((rs->raid_type->level > 1) &&
+ } else if ((!rs->raid_type->level || rs->raid_type->level > 1) &&
sector_div(sectors_per_dev,
(rs->md.raid_disks - rs->raid_type->parity_devs))) {
rs->ti->error = "Target length not divisible by number of data devices";
@@ -947,7 +946,7 @@ static int super_init_validation(struct mddev *mddev, struct md_rdev *rdev)
return -EINVAL;
}
- if (!(rs->print_flags & (DMPF_SYNC | DMPF_NOSYNC)))
+ if (!(rs->ctr_flags & (CTR_FLAG_SYNC | CTR_FLAG_NOSYNC)))
mddev->recovery_cp = le64_to_cpu(sb->array_resync_offset);
/*
@@ -1026,8 +1025,9 @@ static int super_init_validation(struct mddev *mddev, struct md_rdev *rdev)
return 0;
}
-static int super_validate(struct mddev *mddev, struct md_rdev *rdev)
+static int super_validate(struct raid_set *rs, struct md_rdev *rdev)
{
+ struct mddev *mddev = &rs->md;
struct dm_raid_superblock *sb = page_address(rdev->sb_page);
/*
@@ -1037,8 +1037,10 @@ static int super_validate(struct mddev *mddev, struct md_rdev *rdev)
if (!mddev->events && super_init_validation(mddev, rdev))
return -EINVAL;
- mddev->bitmap_info.offset = 4096 >> 9; /* Enable bitmap creation */
- rdev->mddev->bitmap_info.default_offset = 4096 >> 9;
+ /* Enable bitmap creation for RAID levels != 0 */
+ mddev->bitmap_info.offset = (rs->raid_type->level) ? to_sector(4096) : 0;
+ rdev->mddev->bitmap_info.default_offset = mddev->bitmap_info.offset;
+
if (!test_bit(FirstUse, &rdev->flags)) {
rdev->recovery_offset = le64_to_cpu(sb->disk_recovery_offset);
if (rdev->recovery_offset != MaxSector)
@@ -1073,7 +1075,7 @@ static int analyse_superblocks(struct dm_target *ti, struct raid_set *rs)
freshest = NULL;
rdev_for_each_safe(rdev, tmp, mddev) {
/*
- * Skipping super_load due to DMPF_SYNC will cause
+ * Skipping super_load due to CTR_FLAG_SYNC will cause
* the array to undergo initialization again as
* though it were new. This is the intended effect
* of the "sync" directive.
@@ -1082,7 +1084,9 @@ static int analyse_superblocks(struct dm_target *ti, struct raid_set *rs)
* that the "sync" directive is disallowed during the
* reshape.
*/
- if (rs->print_flags & DMPF_SYNC)
+ rdev->sectors = to_sector(i_size_read(rdev->bdev->bd_inode));
+
+ if (rs->ctr_flags & CTR_FLAG_SYNC)
continue;
if (!rdev->meta_bdev)
@@ -1140,11 +1144,11 @@ static int analyse_superblocks(struct dm_target *ti, struct raid_set *rs)
* validation for the remaining devices.
*/
ti->error = "Unable to assemble array: Invalid superblocks";
- if (super_validate(mddev, freshest))
+ if (super_validate(rs, freshest))
return -EINVAL;
rdev_for_each(rdev, mddev)
- if ((rdev != freshest) && super_validate(mddev, rdev))
+ if ((rdev != freshest) && super_validate(rs, rdev))
return -EINVAL;
return 0;
@@ -1243,7 +1247,7 @@ static int raid_ctr(struct dm_target *ti, unsigned argc, char **argv)
}
if ((kstrtoul(argv[num_raid_params], 10, &num_raid_devs) < 0) ||
- (num_raid_devs >= INT_MAX)) {
+ (num_raid_devs > MAX_RAID_DEVICES)) {
ti->error = "Cannot understand number of raid devices";
return -EINVAL;
}
@@ -1282,10 +1286,11 @@ static int raid_ctr(struct dm_target *ti, unsigned argc, char **argv)
*/
configure_discard_support(ti, rs);
- mutex_lock(&rs->md.reconfig_mutex);
+ /* Has to be held on running the array */
+ mddev_lock_nointr(&rs->md);
ret = md_run(&rs->md);
rs->md.in_sync = 0; /* Assume already marked dirty */
- mutex_unlock(&rs->md.reconfig_mutex);
+ mddev_unlock(&rs->md);
if (ret) {
ti->error = "Fail to run raid array";
@@ -1368,34 +1373,40 @@ static void raid_status(struct dm_target *ti, status_type_t type,
case STATUSTYPE_INFO:
DMEMIT("%s %d ", rs->raid_type->name, rs->md.raid_disks);
- if (test_bit(MD_RECOVERY_RUNNING, &rs->md.recovery))
- sync = rs->md.curr_resync_completed;
- else
- sync = rs->md.recovery_cp;
-
- if (sync >= rs->md.resync_max_sectors) {
- /*
- * Sync complete.
- */
+ if (rs->raid_type->level) {
+ if (test_bit(MD_RECOVERY_RUNNING, &rs->md.recovery))
+ sync = rs->md.curr_resync_completed;
+ else
+ sync = rs->md.recovery_cp;
+
+ if (sync >= rs->md.resync_max_sectors) {
+ /*
+ * Sync complete.
+ */
+ array_in_sync = 1;
+ sync = rs->md.resync_max_sectors;
+ } else if (test_bit(MD_RECOVERY_REQUESTED, &rs->md.recovery)) {
+ /*
+ * If "check" or "repair" is occurring, the array has
+ * undergone and initial sync and the health characters
+ * should not be 'a' anymore.
+ */
+ array_in_sync = 1;
+ } else {
+ /*
+ * The array may be doing an initial sync, or it may
+ * be rebuilding individual components. If all the
+ * devices are In_sync, then it is the array that is
+ * being initialized.
+ */
+ for (i = 0; i < rs->md.raid_disks; i++)
+ if (!test_bit(In_sync, &rs->dev[i].rdev.flags))
+ array_in_sync = 1;
+ }
+ } else {
+ /* RAID0 */
array_in_sync = 1;
sync = rs->md.resync_max_sectors;
- } else if (test_bit(MD_RECOVERY_REQUESTED, &rs->md.recovery)) {
- /*
- * If "check" or "repair" is occurring, the array has
- * undergone and initial sync and the health characters
- * should not be 'a' anymore.
- */
- array_in_sync = 1;
- } else {
- /*
- * The array may be doing an initial sync, or it may
- * be rebuilding individual components. If all the
- * devices are In_sync, then it is the array that is
- * being initialized.
- */
- for (i = 0; i < rs->md.raid_disks; i++)
- if (!test_bit(In_sync, &rs->dev[i].rdev.flags))
- array_in_sync = 1;
}
/*
@@ -1446,7 +1457,7 @@ static void raid_status(struct dm_target *ti, status_type_t type,
case STATUSTYPE_TABLE:
/* The string you would use to construct this array */
for (i = 0; i < rs->md.raid_disks; i++) {
- if ((rs->print_flags & DMPF_REBUILD) &&
+ if ((rs->ctr_flags & CTR_FLAG_REBUILD) &&
rs->dev[i].data_dev &&
!test_bit(In_sync, &rs->dev[i].rdev.flags))
raid_param_cnt += 2; /* for rebuilds */
@@ -1455,33 +1466,33 @@ static void raid_status(struct dm_target *ti, status_type_t type,
raid_param_cnt += 2;
}
- raid_param_cnt += (hweight32(rs->print_flags & ~DMPF_REBUILD) * 2);
- if (rs->print_flags & (DMPF_SYNC | DMPF_NOSYNC))
+ raid_param_cnt += (hweight32(rs->ctr_flags & ~CTR_FLAG_REBUILD) * 2);
+ if (rs->ctr_flags & (CTR_FLAG_SYNC | CTR_FLAG_NOSYNC))
raid_param_cnt--;
DMEMIT("%s %u %u", rs->raid_type->name,
raid_param_cnt, rs->md.chunk_sectors);
- if ((rs->print_flags & DMPF_SYNC) &&
+ if ((rs->ctr_flags & CTR_FLAG_SYNC) &&
(rs->md.recovery_cp == MaxSector))
DMEMIT(" sync");
- if (rs->print_flags & DMPF_NOSYNC)
+ if (rs->ctr_flags & CTR_FLAG_NOSYNC)
DMEMIT(" nosync");
for (i = 0; i < rs->md.raid_disks; i++)
- if ((rs->print_flags & DMPF_REBUILD) &&
+ if ((rs->ctr_flags & CTR_FLAG_REBUILD) &&
rs->dev[i].data_dev &&
!test_bit(In_sync, &rs->dev[i].rdev.flags))
DMEMIT(" rebuild %u", i);
- if (rs->print_flags & DMPF_DAEMON_SLEEP)
+ if (rs->ctr_flags & CTR_FLAG_DAEMON_SLEEP)
DMEMIT(" daemon_sleep %lu",
rs->md.bitmap_info.daemon_sleep);
- if (rs->print_flags & DMPF_MIN_RECOVERY_RATE)
+ if (rs->ctr_flags & CTR_FLAG_MIN_RECOVERY_RATE)
DMEMIT(" min_recovery_rate %d", rs->md.sync_speed_min);
- if (rs->print_flags & DMPF_MAX_RECOVERY_RATE)
+ if (rs->ctr_flags & CTR_FLAG_MAX_RECOVERY_RATE)
DMEMIT(" max_recovery_rate %d", rs->md.sync_speed_max);
for (i = 0; i < rs->md.raid_disks; i++)
@@ -1489,11 +1500,11 @@ static void raid_status(struct dm_target *ti, status_type_t type,
test_bit(WriteMostly, &rs->dev[i].rdev.flags))
DMEMIT(" write_mostly %u", i);
- if (rs->print_flags & DMPF_MAX_WRITE_BEHIND)
+ if (rs->ctr_flags & CTR_FLAG_MAX_WRITE_BEHIND)
DMEMIT(" max_write_behind %lu",
rs->md.bitmap_info.max_write_behind);
- if (rs->print_flags & DMPF_STRIPE_CACHE) {
+ if (rs->ctr_flags & CTR_FLAG_STRIPE_CACHE) {
struct r5conf *conf = rs->md.private;
/* convert from kiB to sectors */
@@ -1501,15 +1512,15 @@ static void raid_status(struct dm_target *ti, status_type_t type,
conf ? conf->max_nr_stripes * 2 : 0);
}
- if (rs->print_flags & DMPF_REGION_SIZE)
+ if (rs->ctr_flags & CTR_FLAG_REGION_SIZE)
DMEMIT(" region_size %lu",
rs->md.bitmap_info.chunksize >> 9);
- if (rs->print_flags & DMPF_RAID10_COPIES)
+ if (rs->ctr_flags & CTR_FLAG_RAID10_COPIES)
DMEMIT(" raid10_copies %u",
raid10_md_layout_to_copies(rs->md.layout));
- if (rs->print_flags & DMPF_RAID10_FORMAT)
+ if (rs->ctr_flags & CTR_FLAG_RAID10_FORMAT)
DMEMIT(" raid10_format %s",
raid10_md_layout_to_format(rs->md.layout));
@@ -1684,26 +1695,30 @@ static void raid_resume(struct dm_target *ti)
{
struct raid_set *rs = ti->private;
- set_bit(MD_CHANGE_DEVS, &rs->md.flags);
- if (!rs->bitmap_loaded) {
- bitmap_load(&rs->md);
- rs->bitmap_loaded = 1;
- } else {
- /*
- * A secondary resume while the device is active.
- * Take this opportunity to check whether any failed
- * devices are reachable again.
- */
- attempt_restore_of_faulty_devices(rs);
+ if (rs->raid_type->level) {
+ set_bit(MD_CHANGE_DEVS, &rs->md.flags);
+
+ if (!rs->bitmap_loaded) {
+ bitmap_load(&rs->md);
+ rs->bitmap_loaded = 1;
+ } else {
+ /*
+ * A secondary resume while the device is active.
+ * Take this opportunity to check whether any failed
+ * devices are reachable again.
+ */
+ attempt_restore_of_faulty_devices(rs);
+ }
+
+ clear_bit(MD_RECOVERY_FROZEN, &rs->md.recovery);
}
- clear_bit(MD_RECOVERY_FROZEN, &rs->md.recovery);
mddev_resume(&rs->md);
}
static struct target_type raid_target = {
.name = "raid",
- .version = {1, 6, 0},
+ .version = {1, 7, 0},
.module = THIS_MODULE,
.ctr = raid_ctr,
.dtr = raid_dtr,