These changes are the raw update to linux-4.4.6-rt14. Kernel sources

are taken from kernel.org, and rt patch from the rt wiki download page.

During the rebasing, the following patch collided:

Force tick interrupt and get rid of softirq magic(I70131fb85).

Collisions have been removed because its logic was found on the
source already.

Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>

1 files changed, 19 insertions, 758 deletions

diff --git a/kernel/drivers/input/touchscreen/tsc2005.c b/kernel/drivers/input/touchscreen/tsc2005.c
index 72657c579..b9f593dfd 100644
--- a/kernel/drivers/input/touchscreen/tsc2005.c
+++ b/kernel/drivers/input/touchscreen/tsc2005.c
@@ -2,9 +2,10 @@
  * TSC2005 touchscreen driver
  *
  * Copyright (C) 2006-2010 Nokia Corporation
+ * Copyright (C) 2015 QWERTY Embedded Design
+ * Copyright (C) 2015 EMAC Inc.
  *
- * Author: Lauri Leukkunen <lauri.leukkunen@nokia.com>
- * based on TSC2301 driver by Klaus K. Pedersen <klaus.k.pedersen@nokia.com>
+ * Based on original tsc2005.c by Lauri Leukkunen <lauri.leukkunen@nokia.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -15,166 +16,32 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
  */
 
-#include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/input.h>
-#include <linux/input/touchscreen.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/pm.h>
-#include <linux/of.h>
-#include <linux/of_gpio.h>
 #include <linux/spi/spi.h>
-#include <linux/spi/tsc2005.h>
-#include <linux/regulator/consumer.h>
-
-/*
- * The touchscreen interface operates as follows:
- *
- * 1) Pen is pressed against the touchscreen.
- * 2) TSC2005 performs AD conversion.
- * 3) After the conversion is done TSC2005 drives DAV line down.
- * 4) GPIO IRQ is received and tsc2005_irq_thread() is scheduled.
- * 5) tsc2005_irq_thread() queues up an spi transfer to fetch the x, y, z1, z2
- *    values.
- * 6) tsc2005_irq_thread() reports coordinates to input layer and sets up
- *    tsc2005_penup_timer() to be called after TSC2005_PENUP_TIME_MS (40ms).
- * 7) When the penup timer expires, there have not been touch or DAV interrupts
- *    during the last 40ms which means the pen has been lifted.
- *
- * ESD recovery via a hardware reset is done if the TSC2005 doesn't respond
- * after a configurable period (in ms) of activity. If esd_timeout is 0, the
- * watchdog is disabled.
- */
-
-/* control byte 1 */
-#define TSC2005_CMD			0x80
-#define TSC2005_CMD_NORMAL		0x00
-#define TSC2005_CMD_STOP		0x01
-#define TSC2005_CMD_12BIT		0x04
-
-/* control byte 0 */
-#define TSC2005_REG_READ		0x0001
-#define TSC2005_REG_PND0		0x0002
-#define TSC2005_REG_X			0x0000
-#define TSC2005_REG_Y			0x0008
-#define TSC2005_REG_Z1			0x0010
-#define TSC2005_REG_Z2			0x0018
-#define TSC2005_REG_TEMP_HIGH		0x0050
-#define TSC2005_REG_CFR0		0x0060
-#define TSC2005_REG_CFR1		0x0068
-#define TSC2005_REG_CFR2		0x0070
-
-/* configuration register 0 */
-#define TSC2005_CFR0_PRECHARGE_276US	0x0040
-#define TSC2005_CFR0_STABTIME_1MS	0x0300
-#define TSC2005_CFR0_CLOCK_1MHZ		0x1000
-#define TSC2005_CFR0_RESOLUTION12	0x2000
-#define TSC2005_CFR0_PENMODE		0x8000
-#define TSC2005_CFR0_INITVALUE		(TSC2005_CFR0_STABTIME_1MS    | \
-					 TSC2005_CFR0_CLOCK_1MHZ      | \
-					 TSC2005_CFR0_RESOLUTION12    | \
-					 TSC2005_CFR0_PRECHARGE_276US | \
-					 TSC2005_CFR0_PENMODE)
-
-/* bits common to both read and write of configuration register 0 */
-#define	TSC2005_CFR0_RW_MASK		0x3fff
-
-/* configuration register 1 */
-#define TSC2005_CFR1_BATCHDELAY_4MS	0x0003
-#define TSC2005_CFR1_INITVALUE		TSC2005_CFR1_BATCHDELAY_4MS
-
-/* configuration register 2 */
-#define TSC2005_CFR2_MAVE_Z		0x0004
-#define TSC2005_CFR2_MAVE_Y		0x0008
-#define TSC2005_CFR2_MAVE_X		0x0010
-#define TSC2005_CFR2_AVG_7		0x0800
-#define TSC2005_CFR2_MEDIUM_15		0x3000
-#define TSC2005_CFR2_INITVALUE		(TSC2005_CFR2_MAVE_X	| \
-					 TSC2005_CFR2_MAVE_Y	| \
-					 TSC2005_CFR2_MAVE_Z	| \
-					 TSC2005_CFR2_MEDIUM_15	| \
-					 TSC2005_CFR2_AVG_7)
-
-#define MAX_12BIT			0xfff
-#define TSC2005_DEF_X_FUZZ		4
-#define TSC2005_DEF_Y_FUZZ		8
-#define TSC2005_DEF_P_FUZZ		2
-#define TSC2005_DEF_RESISTOR		280
-
-#define TSC2005_SPI_MAX_SPEED_HZ	10000000
-#define TSC2005_PENUP_TIME_MS		40
-
-struct tsc2005_spi_rd {
-	struct spi_transfer	spi_xfer;
-	u32			spi_tx;
-	u32			spi_rx;
-};
-
-struct tsc2005 {
-	struct spi_device	*spi;
-
-	struct spi_message      spi_read_msg;
-	struct tsc2005_spi_rd	spi_x;
-	struct tsc2005_spi_rd	spi_y;
-	struct tsc2005_spi_rd	spi_z1;
-	struct tsc2005_spi_rd	spi_z2;
-
-	struct input_dev	*idev;
-	char			phys[32];
-
-	struct mutex		mutex;
-
-	/* raw copy of previous x,y,z */
-	int			in_x;
-	int			in_y;
-	int                     in_z1;
-	int			in_z2;
-
-	spinlock_t		lock;
-	struct timer_list	penup_timer;
-
-	unsigned int		esd_timeout;
-	struct delayed_work	esd_work;
-	unsigned long		last_valid_interrupt;
+#include <linux/regmap.h>
+#include "tsc200x-core.h"
 
-	unsigned int		x_plate_ohm;
-
-	bool			opened;
-	bool			suspended;
-
-	bool			pen_down;
-
-	struct regulator	*vio;
-
-	int			reset_gpio;
-	void			(*set_reset)(bool enable);
-};
-
-static int tsc2005_cmd(struct tsc2005 *ts, u8 cmd)
+static int tsc2005_cmd(struct device *dev, u8 cmd)
 {
-	u8 tx = TSC2005_CMD | TSC2005_CMD_12BIT | cmd;
+	u8 tx = TSC200X_CMD | TSC200X_CMD_12BIT | cmd;
 	struct spi_transfer xfer = {
-		.tx_buf		= &tx,
-		.len		= 1,
-		.bits_per_word	= 8,
+		.tx_buf         = &tx,
+		.len            = 1,
+		.bits_per_word  = 8,
 	};
 	struct spi_message msg;
+	struct spi_device *spi = to_spi_device(dev);
 	int error;
 
 	spi_message_init(&msg);
 	spi_message_add_tail(&xfer, &msg);
 
-	error = spi_sync(ts->spi, &msg);
+	error = spi_sync(spi, &msg);
 	if (error) {
-		dev_err(&ts->spi->dev, "%s: failed, command: %x, error: %d\n",
+		dev_err(dev, "%s: failed, command: %x, spi error: %d\n",
 			__func__, cmd, error);
 		return error;
 	}
@@ -182,457 +49,10 @@ static int tsc2005_cmd(struct tsc2005 *ts, u8 cmd)
 	return 0;
 }
 
-static int tsc2005_write(struct tsc2005 *ts, u8 reg, u16 value)
-{
-	u32 tx = ((reg | TSC2005_REG_PND0) << 16) | value;
-	struct spi_transfer xfer = {
-		.tx_buf		= &tx,
-		.len		= 4,
-		.bits_per_word	= 24,
-	};
-	struct spi_message msg;
-	int error;
-
-	spi_message_init(&msg);
-	spi_message_add_tail(&xfer, &msg);
-
-	error = spi_sync(ts->spi, &msg);
-	if (error) {
-		dev_err(&ts->spi->dev,
-			"%s: failed, register: %x, value: %x, error: %d\n",
-			__func__, reg, value, error);
-		return error;
-	}
-
-	return 0;
-}
-
-static void tsc2005_setup_read(struct tsc2005_spi_rd *rd, u8 reg, bool last)
-{
-	memset(rd, 0, sizeof(*rd));
-
-	rd->spi_tx		   = (reg | TSC2005_REG_READ) << 16;
-	rd->spi_xfer.tx_buf	   = &rd->spi_tx;
-	rd->spi_xfer.rx_buf	   = &rd->spi_rx;
-	rd->spi_xfer.len	   = 4;
-	rd->spi_xfer.bits_per_word = 24;
-	rd->spi_xfer.cs_change	   = !last;
-}
-
-static int tsc2005_read(struct tsc2005 *ts, u8 reg, u16 *value)
-{
-	struct tsc2005_spi_rd spi_rd;
-	struct spi_message msg;
-	int error;
-
-	tsc2005_setup_read(&spi_rd, reg, true);
-
-	spi_message_init(&msg);
-	spi_message_add_tail(&spi_rd.spi_xfer, &msg);
-
-	error = spi_sync(ts->spi, &msg);
-	if (error)
-		return error;
-
-	*value = spi_rd.spi_rx;
-	return 0;
-}
-
-static void tsc2005_update_pen_state(struct tsc2005 *ts,
-				     int x, int y, int pressure)
-{
-	if (pressure) {
-		input_report_abs(ts->idev, ABS_X, x);
-		input_report_abs(ts->idev, ABS_Y, y);
-		input_report_abs(ts->idev, ABS_PRESSURE, pressure);
-		if (!ts->pen_down) {
-			input_report_key(ts->idev, BTN_TOUCH, !!pressure);
-			ts->pen_down = true;
-		}
-	} else {
-		input_report_abs(ts->idev, ABS_PRESSURE, 0);
-		if (ts->pen_down) {
-			input_report_key(ts->idev, BTN_TOUCH, 0);
-			ts->pen_down = false;
-		}
-	}
-	input_sync(ts->idev);
-	dev_dbg(&ts->spi->dev, "point(%4d,%4d), pressure (%4d)\n", x, y,
-		pressure);
-}
-
-static irqreturn_t tsc2005_irq_thread(int irq, void *_ts)
-{
-	struct tsc2005 *ts = _ts;
-	unsigned long flags;
-	unsigned int pressure;
-	u32 x, y;
-	u32 z1, z2;
-	int error;
-
-	/* read the coordinates */
-	error = spi_sync(ts->spi, &ts->spi_read_msg);
-	if (unlikely(error))
-		goto out;
-
-	x = ts->spi_x.spi_rx;
-	y = ts->spi_y.spi_rx;
-	z1 = ts->spi_z1.spi_rx;
-	z2 = ts->spi_z2.spi_rx;
-
-	/* validate position */
-	if (unlikely(x > MAX_12BIT || y > MAX_12BIT))
-		goto out;
-
-	/* Skip reading if the pressure components are out of range */
-	if (unlikely(z1 == 0 || z2 > MAX_12BIT || z1 >= z2))
-		goto out;
-
-       /*
-	* Skip point if this is a pen down with the exact same values as
-	* the value before pen-up - that implies SPI fed us stale data
-	*/
-	if (!ts->pen_down &&
-	    ts->in_x == x && ts->in_y == y &&
-	    ts->in_z1 == z1 && ts->in_z2 == z2) {
-		goto out;
-	}
-
-	/*
-	 * At this point we are happy we have a valid and useful reading.
-	 * Remember it for later comparisons. We may now begin downsampling.
-	 */
-	ts->in_x = x;
-	ts->in_y = y;
-	ts->in_z1 = z1;
-	ts->in_z2 = z2;
-
-	/* Compute touch pressure resistance using equation #1 */
-	pressure = x * (z2 - z1) / z1;
-	pressure = pressure * ts->x_plate_ohm / 4096;
-	if (unlikely(pressure > MAX_12BIT))
-		goto out;
-
-	spin_lock_irqsave(&ts->lock, flags);
-
-	tsc2005_update_pen_state(ts, x, y, pressure);
-	mod_timer(&ts->penup_timer,
-		  jiffies + msecs_to_jiffies(TSC2005_PENUP_TIME_MS));
-
-	spin_unlock_irqrestore(&ts->lock, flags);
-
-	ts->last_valid_interrupt = jiffies;
-out:
-	return IRQ_HANDLED;
-}
-
-static void tsc2005_penup_timer(unsigned long data)
-{
-	struct tsc2005 *ts = (struct tsc2005 *)data;
-	unsigned long flags;
-
-	spin_lock_irqsave(&ts->lock, flags);
-	tsc2005_update_pen_state(ts, 0, 0, 0);
-	spin_unlock_irqrestore(&ts->lock, flags);
-}
-
-static void tsc2005_start_scan(struct tsc2005 *ts)
-{
-	tsc2005_write(ts, TSC2005_REG_CFR0, TSC2005_CFR0_INITVALUE);
-	tsc2005_write(ts, TSC2005_REG_CFR1, TSC2005_CFR1_INITVALUE);
-	tsc2005_write(ts, TSC2005_REG_CFR2, TSC2005_CFR2_INITVALUE);
-	tsc2005_cmd(ts, TSC2005_CMD_NORMAL);
-}
-
-static void tsc2005_stop_scan(struct tsc2005 *ts)
-{
-	tsc2005_cmd(ts, TSC2005_CMD_STOP);
-}
-
-static void tsc2005_set_reset(struct tsc2005 *ts, bool enable)
-{
-	if (ts->reset_gpio >= 0)
-		gpio_set_value(ts->reset_gpio, enable);
-	else if (ts->set_reset)
-		ts->set_reset(enable);
-}
-
-/* must be called with ts->mutex held */
-static void __tsc2005_disable(struct tsc2005 *ts)
-{
-	tsc2005_stop_scan(ts);
-
-	disable_irq(ts->spi->irq);
-	del_timer_sync(&ts->penup_timer);
-
-	cancel_delayed_work_sync(&ts->esd_work);
-
-	enable_irq(ts->spi->irq);
-}
-
-/* must be called with ts->mutex held */
-static void __tsc2005_enable(struct tsc2005 *ts)
-{
-	tsc2005_start_scan(ts);
-
-	if (ts->esd_timeout && (ts->set_reset || ts->reset_gpio)) {
-		ts->last_valid_interrupt = jiffies;
-		schedule_delayed_work(&ts->esd_work,
-				round_jiffies_relative(
-					msecs_to_jiffies(ts->esd_timeout)));
-	}
-
-}
-
-static ssize_t tsc2005_selftest_show(struct device *dev,
-				     struct device_attribute *attr,
-				     char *buf)
-{
-	struct spi_device *spi = to_spi_device(dev);
-	struct tsc2005 *ts = spi_get_drvdata(spi);
-	u16 temp_high;
-	u16 temp_high_orig;
-	u16 temp_high_test;
-	bool success = true;
-	int error;
-
-	mutex_lock(&ts->mutex);
-
-	/*
-	 * Test TSC2005 communications via temp high register.
-	 */
-	__tsc2005_disable(ts);
-
-	error = tsc2005_read(ts, TSC2005_REG_TEMP_HIGH, &temp_high_orig);
-	if (error) {
-		dev_warn(dev, "selftest failed: read error %d\n", error);
-		success = false;
-		goto out;
-	}
-
-	temp_high_test = (temp_high_orig - 1) & MAX_12BIT;
-
-	error = tsc2005_write(ts, TSC2005_REG_TEMP_HIGH, temp_high_test);
-	if (error) {
-		dev_warn(dev, "selftest failed: write error %d\n", error);
-		success = false;
-		goto out;
-	}
-
-	error = tsc2005_read(ts, TSC2005_REG_TEMP_HIGH, &temp_high);
-	if (error) {
-		dev_warn(dev, "selftest failed: read error %d after write\n",
-			 error);
-		success = false;
-		goto out;
-	}
-
-	if (temp_high != temp_high_test) {
-		dev_warn(dev, "selftest failed: %d != %d\n",
-			 temp_high, temp_high_test);
-		success = false;
-	}
-
-	/* hardware reset */
-	tsc2005_set_reset(ts, false);
-	usleep_range(100, 500); /* only 10us required */
-	tsc2005_set_reset(ts, true);
-
-	if (!success)
-		goto out;
-
-	/* test that the reset really happened */
-	error = tsc2005_read(ts, TSC2005_REG_TEMP_HIGH, &temp_high);
-	if (error) {
-		dev_warn(dev, "selftest failed: read error %d after reset\n",
-			 error);
-		success = false;
-		goto out;
-	}
-
-	if (temp_high != temp_high_orig) {
-		dev_warn(dev, "selftest failed after reset: %d != %d\n",
-			 temp_high, temp_high_orig);
-		success = false;
-	}
-
-out:
-	__tsc2005_enable(ts);
-	mutex_unlock(&ts->mutex);
-
-	return sprintf(buf, "%d\n", success);
-}
-
-static DEVICE_ATTR(selftest, S_IRUGO, tsc2005_selftest_show, NULL);
-
-static struct attribute *tsc2005_attrs[] = {
-	&dev_attr_selftest.attr,
-	NULL
-};
-
-static umode_t tsc2005_attr_is_visible(struct kobject *kobj,
-				      struct attribute *attr, int n)
-{
-	struct device *dev = container_of(kobj, struct device, kobj);
-	struct spi_device *spi = to_spi_device(dev);
-	struct tsc2005 *ts = spi_get_drvdata(spi);
-	umode_t mode = attr->mode;
-
-	if (attr == &dev_attr_selftest.attr) {
-		if (!ts->set_reset && !ts->reset_gpio)
-			mode = 0;
-	}
-
-	return mode;
-}
-
-static const struct attribute_group tsc2005_attr_group = {
-	.is_visible	= tsc2005_attr_is_visible,
-	.attrs		= tsc2005_attrs,
-};
-
-static void tsc2005_esd_work(struct work_struct *work)
-{
-	struct tsc2005 *ts = container_of(work, struct tsc2005, esd_work.work);
-	int error;
-	u16 r;
-
-	if (!mutex_trylock(&ts->mutex)) {
-		/*
-		 * If the mutex is taken, it means that disable or enable is in
-		 * progress. In that case just reschedule the work. If the work
-		 * is not needed, it will be canceled by disable.
-		 */
-		goto reschedule;
-	}
-
-	if (time_is_after_jiffies(ts->last_valid_interrupt +
-				  msecs_to_jiffies(ts->esd_timeout)))
-		goto out;
-
-	/* We should be able to read register without disabling interrupts. */
-	error = tsc2005_read(ts, TSC2005_REG_CFR0, &r);
-	if (!error &&
-	    !((r ^ TSC2005_CFR0_INITVALUE) & TSC2005_CFR0_RW_MASK)) {
-		goto out;
-	}
-
-	/*
-	 * If we could not read our known value from configuration register 0
-	 * then we should reset the controller as if from power-up and start
-	 * scanning again.
-	 */
-	dev_info(&ts->spi->dev, "TSC2005 not responding - resetting\n");
-
-	disable_irq(ts->spi->irq);
-	del_timer_sync(&ts->penup_timer);
-
-	tsc2005_update_pen_state(ts, 0, 0, 0);
-
-	tsc2005_set_reset(ts, false);
-	usleep_range(100, 500); /* only 10us required */
-	tsc2005_set_reset(ts, true);
-
-	enable_irq(ts->spi->irq);
-	tsc2005_start_scan(ts);
-
-out:
-	mutex_unlock(&ts->mutex);
-reschedule:
-	/* re-arm the watchdog */
-	schedule_delayed_work(&ts->esd_work,
-			      round_jiffies_relative(
-					msecs_to_jiffies(ts->esd_timeout)));
-}
-
-static int tsc2005_open(struct input_dev *input)
-{
-	struct tsc2005 *ts = input_get_drvdata(input);
-
-	mutex_lock(&ts->mutex);
-
-	if (!ts->suspended)
-		__tsc2005_enable(ts);
-
-	ts->opened = true;
-
-	mutex_unlock(&ts->mutex);
-
-	return 0;
-}
-
-static void tsc2005_close(struct input_dev *input)
-{
-	struct tsc2005 *ts = input_get_drvdata(input);
-
-	mutex_lock(&ts->mutex);
-
-	if (!ts->suspended)
-		__tsc2005_disable(ts);
-
-	ts->opened = false;
-
-	mutex_unlock(&ts->mutex);
-}
-
-static void tsc2005_setup_spi_xfer(struct tsc2005 *ts)
-{
-	tsc2005_setup_read(&ts->spi_x, TSC2005_REG_X, false);
-	tsc2005_setup_read(&ts->spi_y, TSC2005_REG_Y, false);
-	tsc2005_setup_read(&ts->spi_z1, TSC2005_REG_Z1, false);
-	tsc2005_setup_read(&ts->spi_z2, TSC2005_REG_Z2, true);
-
-	spi_message_init(&ts->spi_read_msg);
-	spi_message_add_tail(&ts->spi_x.spi_xfer, &ts->spi_read_msg);
-	spi_message_add_tail(&ts->spi_y.spi_xfer, &ts->spi_read_msg);
-	spi_message_add_tail(&ts->spi_z1.spi_xfer, &ts->spi_read_msg);
-	spi_message_add_tail(&ts->spi_z2.spi_xfer, &ts->spi_read_msg);
-}
-
 static int tsc2005_probe(struct spi_device *spi)
 {
-	const struct tsc2005_platform_data *pdata = dev_get_platdata(&spi->dev);
-	struct device_node *np = spi->dev.of_node;
-
-	struct tsc2005 *ts;
-	struct input_dev *input_dev;
-	unsigned int max_x = MAX_12BIT;
-	unsigned int max_y = MAX_12BIT;
-	unsigned int max_p = MAX_12BIT;
-	unsigned int fudge_x = TSC2005_DEF_X_FUZZ;
-	unsigned int fudge_y = TSC2005_DEF_Y_FUZZ;
-	unsigned int fudge_p = TSC2005_DEF_P_FUZZ;
-	unsigned int x_plate_ohm = TSC2005_DEF_RESISTOR;
-	unsigned int esd_timeout;
 	int error;
 
-	if (!np && !pdata) {
-		dev_err(&spi->dev, "no platform data\n");
-		return -ENODEV;
-	}
-
-	if (spi->irq <= 0) {
-		dev_err(&spi->dev, "no irq\n");
-		return -ENODEV;
-	}
-
-	if (pdata) {
-		fudge_x	= pdata->ts_x_fudge;
-		fudge_y	= pdata->ts_y_fudge;
-		fudge_p	= pdata->ts_pressure_fudge;
-		max_x	= pdata->ts_x_max;
-		max_y	= pdata->ts_y_max;
-		max_p	= pdata->ts_pressure_max;
-		x_plate_ohm = pdata->ts_x_plate_ohm;
-		esd_timeout = pdata->esd_timeout_ms;
-	} else {
-		x_plate_ohm = TSC2005_DEF_RESISTOR;
-		of_property_read_u32(np, "ti,x-plate-ohms", &x_plate_ohm);
-		esd_timeout = 0;
-		of_property_read_u32(np, "ti,esd-recovery-timeout-ms",
-								&esd_timeout);
-	}
-
 	spi->mode = SPI_MODE_0;
 	spi->bits_per_word = 8;
 	if (!spi->max_speed_hz)
@@ -642,186 +62,27 @@ static int tsc2005_probe(struct spi_device *spi)
 	if (error)
 		return error;
 
-	ts = devm_kzalloc(&spi->dev, sizeof(*ts), GFP_KERNEL);
-	if (!ts)
-		return -ENOMEM;
-
-	input_dev = devm_input_allocate_device(&spi->dev);
-	if (!input_dev)
-		return -ENOMEM;
-
-	ts->spi = spi;
-	ts->idev = input_dev;
-
-	ts->x_plate_ohm = x_plate_ohm;
-	ts->esd_timeout = esd_timeout;
-
-	if (np) {
-		ts->reset_gpio = of_get_named_gpio(np, "reset-gpios", 0);
-		if (ts->reset_gpio == -EPROBE_DEFER)
-			return ts->reset_gpio;
-		if (ts->reset_gpio < 0) {
-			dev_err(&spi->dev, "error acquiring reset gpio: %d\n",
-				ts->reset_gpio);
-			return ts->reset_gpio;
-		}
-
-		error = devm_gpio_request_one(&spi->dev, ts->reset_gpio, 0,
-					      "reset-gpios");
-		if (error) {
-			dev_err(&spi->dev, "error requesting reset gpio: %d\n",
-				error);
-			return error;
-		}
-
-		ts->vio = devm_regulator_get(&spi->dev, "vio");
-		if (IS_ERR(ts->vio)) {
-			error = PTR_ERR(ts->vio);
-			dev_err(&spi->dev, "vio regulator missing (%d)", error);
-			return error;
-		}
-	} else {
-		ts->reset_gpio = -1;
-		ts->set_reset = pdata->set_reset;
-	}
-
-	mutex_init(&ts->mutex);
-
-	spin_lock_init(&ts->lock);
-	setup_timer(&ts->penup_timer, tsc2005_penup_timer, (unsigned long)ts);
-
-	INIT_DELAYED_WORK(&ts->esd_work, tsc2005_esd_work);
-
-	tsc2005_setup_spi_xfer(ts);
-
-	snprintf(ts->phys, sizeof(ts->phys),
-		 "%s/input-ts", dev_name(&spi->dev));
-
-	input_dev->name = "TSC2005 touchscreen";
-	input_dev->phys = ts->phys;
-	input_dev->id.bustype = BUS_SPI;
-	input_dev->dev.parent = &spi->dev;
-	input_dev->evbit[0] = BIT(EV_ABS) | BIT(EV_KEY);
-	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
-
-	input_set_abs_params(input_dev, ABS_X, 0, max_x, fudge_x, 0);
-	input_set_abs_params(input_dev, ABS_Y, 0, max_y, fudge_y, 0);
-	input_set_abs_params(input_dev, ABS_PRESSURE, 0, max_p, fudge_p, 0);
-
-	if (np)
-		touchscreen_parse_of_params(input_dev);
-
-	input_dev->open = tsc2005_open;
-	input_dev->close = tsc2005_close;
-
-	input_set_drvdata(input_dev, ts);
-
-	/* Ensure the touchscreen is off */
-	tsc2005_stop_scan(ts);
-
-	error = devm_request_threaded_irq(&spi->dev, spi->irq, NULL,
-					  tsc2005_irq_thread,
-					  IRQF_TRIGGER_RISING | IRQF_ONESHOT,
-					  "tsc2005", ts);
-	if (error) {
-		dev_err(&spi->dev, "Failed to request irq, err: %d\n", error);
-		return error;
-	}
-
-	/* enable regulator for DT */
-	if (ts->vio) {
-		error = regulator_enable(ts->vio);
-		if (error)
-			return error;
-	}
-
-	spi_set_drvdata(spi, ts);
-	error = sysfs_create_group(&spi->dev.kobj, &tsc2005_attr_group);
-	if (error) {
-		dev_err(&spi->dev,
-			"Failed to create sysfs attributes, err: %d\n", error);
-		goto disable_regulator;
-	}
-
-	error = input_register_device(ts->idev);
-	if (error) {
-		dev_err(&spi->dev,
-			"Failed to register input device, err: %d\n", error);
-		goto err_remove_sysfs;
-	}
-
-	irq_set_irq_wake(spi->irq, 1);
-	return 0;
-
-err_remove_sysfs:
-	sysfs_remove_group(&spi->dev.kobj, &tsc2005_attr_group);
-disable_regulator:
-	if (ts->vio)
-		regulator_disable(ts->vio);
-	return error;
+	return tsc200x_probe(&spi->dev, spi->irq, BUS_SPI,
+			     devm_regmap_init_spi(spi, &tsc200x_regmap_config),
+			     tsc2005_cmd);
 }
 
 static int tsc2005_remove(struct spi_device *spi)
 {
-	struct tsc2005 *ts = spi_get_drvdata(spi);
-
-	sysfs_remove_group(&spi->dev.kobj, &tsc2005_attr_group);
-
-	if (ts->vio)
-		regulator_disable(ts->vio);
-
-	return 0;
+	return tsc200x_remove(&spi->dev);
 }
 
-static int __maybe_unused tsc2005_suspend(struct device *dev)
-{
-	struct spi_device *spi = to_spi_device(dev);
-	struct tsc2005 *ts = spi_get_drvdata(spi);
-
-	mutex_lock(&ts->mutex);
-
-	if (!ts->suspended && ts->opened)
-		__tsc2005_disable(ts);
-
-	ts->suspended = true;
-
-	mutex_unlock(&ts->mutex);
-
-	return 0;
-}
-
-static int __maybe_unused tsc2005_resume(struct device *dev)
-{
-	struct spi_device *spi = to_spi_device(dev);
-	struct tsc2005 *ts = spi_get_drvdata(spi);
-
-	mutex_lock(&ts->mutex);
-
-	if (ts->suspended && ts->opened)
-		__tsc2005_enable(ts);
-
-	ts->suspended = false;
-
-	mutex_unlock(&ts->mutex);
-
-	return 0;
-}
-
-static SIMPLE_DEV_PM_OPS(tsc2005_pm_ops, tsc2005_suspend, tsc2005_resume);
-
 static struct spi_driver tsc2005_driver = {
 	.driver	= {
 		.name	= "tsc2005",
-		.owner	= THIS_MODULE,
-		.pm	= &tsc2005_pm_ops,
+		.pm	= &tsc200x_pm_ops,
 	},
 	.probe	= tsc2005_probe,
 	.remove	= tsc2005_remove,
 };
-
 module_spi_driver(tsc2005_driver);
 
-MODULE_AUTHOR("Lauri Leukkunen <lauri.leukkunen@nokia.com>");
+MODULE_AUTHOR("Michael Welling <mwelling@ieee.org>");
 MODULE_DESCRIPTION("TSC2005 Touchscreen Driver");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("spi:tsc2005");