summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/input/misc/Kconfig
diff options
context:
space:
mode:
authorJosé Pekkarinen <jose.pekkarinen@nokia.com>2016-04-11 10:41:07 +0300
committerJosé Pekkarinen <jose.pekkarinen@nokia.com>2016-04-13 08:17:18 +0300
commite09b41010ba33a20a87472ee821fa407a5b8da36 (patch)
treed10dc367189862e7ca5c592f033dc3726e1df4e3 /kernel/drivers/input/misc/Kconfig
parentf93b97fd65072de626c074dbe099a1fff05ce060 (diff)
These changes are the raw update to linux-4.4.6-rt14. Kernel sources
are taken from kernel.org, and rt patch from the rt wiki download page. During the rebasing, the following patch collided: Force tick interrupt and get rid of softirq magic(I70131fb85). Collisions have been removed because its logic was found on the source already. Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769 Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>
Diffstat (limited to 'kernel/drivers/input/misc/Kconfig')
-rw-r--r--kernel/drivers/input/misc/Kconfig56
1 files changed, 33 insertions, 23 deletions
diff --git a/kernel/drivers/input/misc/Kconfig b/kernel/drivers/input/misc/Kconfig
index 4436ab1b9..d6d16fa78 100644
--- a/kernel/drivers/input/misc/Kconfig
+++ b/kernel/drivers/input/misc/Kconfig
@@ -94,11 +94,11 @@ config INPUT_BMA150
module will be called bma150.
config INPUT_E3X0_BUTTON
- tristate "NI Ettus Research USRP E3x0 Button support."
+ tristate "NI Ettus Research USRP E3xx Button support."
default n
help
Say Y here to enable support for the NI Ettus Research
- USRP E3x0 Button.
+ USRP E3xx Button.
To compile this driver as a module, choose M here: the
module will be called e3x0_button.
@@ -167,28 +167,16 @@ config INPUT_M68K_BEEP
depends on M68K
config INPUT_MAX77693_HAPTIC
- tristate "MAXIM MAX77693 haptic controller support"
- depends on MFD_MAX77693 && PWM
+ tristate "MAXIM MAX77693/MAX77843 haptic controller support"
+ depends on (MFD_MAX77693 || MFD_MAX77843) && PWM
select INPUT_FF_MEMLESS
help
This option enables support for the haptic controller on
- MAXIM MAX77693 chip.
+ MAXIM MAX77693 and MAX77843 chips.
To compile this driver as module, choose M here: the
module will be called max77693-haptic.
-config INPUT_MAX77843_HAPTIC
- tristate "MAXIM MAX77843 haptic controller support"
- depends on MFD_MAX77843 && REGULATOR
- select INPUT_FF_MEMLESS
- help
- This option enables support for the haptic controller on
- MAXIM MAX77843 chip. The driver supports ff-memless interface
- from input framework.
-
- To compile this driver as module, choose M here: the
- module will be called max77843-haptic.
-
config INPUT_MAX8925_ONKEY
tristate "MAX8925 ONKEY support"
depends on MFD_MAX8925
@@ -259,7 +247,7 @@ config INPUT_APANEL
config INPUT_GP2A
tristate "Sharp GP2AP002A00F I2C Proximity/Opto sensor driver"
depends on I2C
- depends on GPIOLIB
+ depends on GPIOLIB || COMPILE_TEST
help
Say Y here if you have a Sharp GP2AP002A00F proximity/als combo-chip
hooked to an I2C bus.
@@ -269,7 +257,7 @@ config INPUT_GP2A
config INPUT_GPIO_BEEPER
tristate "Generic GPIO Beeper support"
- depends on GPIOLIB
+ depends on GPIOLIB || COMPILE_TEST
help
Say Y here if you have a beeper connected to a GPIO pin.
@@ -278,7 +266,7 @@ config INPUT_GPIO_BEEPER
config INPUT_GPIO_TILT_POLLED
tristate "Polled GPIO tilt switch"
- depends on GPIOLIB
+ depends on GPIOLIB || COMPILE_TEST
select INPUT_POLLDEV
help
This driver implements support for tilt switches connected
@@ -569,7 +557,7 @@ config INPUT_PWM_BEEPER
config INPUT_GPIO_ROTARY_ENCODER
tristate "Rotary encoders connected to GPIO pins"
- depends on GPIOLIB
+ depends on GPIOLIB || COMPILE_TEST
help
Say Y here to add support for rotary encoders connected to GPIO lines.
Check file:Documentation/input/rotary-encoder.txt for more
@@ -610,6 +598,16 @@ config INPUT_DA9055_ONKEY
To compile this driver as a module, choose M here: the module
will be called da9055_onkey.
+config INPUT_DA9063_ONKEY
+ tristate "Dialog DA9062/63 OnKey"
+ depends on MFD_DA9063 || MFD_DA9062
+ help
+ Support the ONKEY of Dialog DA9063 and DA9062 Power Management ICs
+ as an input device capable of reporting the power button status.
+
+ To compile this driver as a module, choose M here: the module
+ will be called da9063_onkey.
+
config INPUT_DM355EVM
tristate "TI DaVinci DM355 EVM Keypad and IR Remote"
depends on MFD_DM355EVM_MSP
@@ -766,7 +764,8 @@ config INPUT_SOC_BUTTON_ARRAY
config INPUT_DRV260X_HAPTICS
tristate "TI DRV260X haptics support"
- depends on INPUT && I2C && GPIOLIB
+ depends on INPUT && I2C
+ depends on GPIOLIB || COMPILE_TEST
select INPUT_FF_MEMLESS
select REGMAP_I2C
help
@@ -775,6 +774,17 @@ config INPUT_DRV260X_HAPTICS
To compile this driver as a module, choose M here: the
module will be called drv260x-haptics.
+config INPUT_DRV2665_HAPTICS
+ tristate "TI DRV2665 haptics support"
+ depends on INPUT && I2C
+ select INPUT_FF_MEMLESS
+ select REGMAP_I2C
+ help
+ Say Y to enable support for the TI DRV2665 haptics driver.
+
+ To compile this driver as a module, choose M here: the
+ module will be called drv2665-haptics.
+
config INPUT_DRV2667_HAPTICS
tristate "TI DRV2667 haptics support"
depends on INPUT && I2C
@@ -784,6 +794,6 @@ config INPUT_DRV2667_HAPTICS
Say Y to enable support for the TI DRV2667 haptics driver.
To compile this driver as a module, choose M here: the
- module will be called drv260x-haptics.
+ module will be called drv2667-haptics.
endif