diff options
author | José Pekkarinen <jose.pekkarinen@nokia.com> | 2016-04-11 10:41:07 +0300 |
---|---|---|
committer | José Pekkarinen <jose.pekkarinen@nokia.com> | 2016-04-13 08:17:18 +0300 |
commit | e09b41010ba33a20a87472ee821fa407a5b8da36 (patch) | |
tree | d10dc367189862e7ca5c592f033dc3726e1df4e3 /kernel/drivers/infiniband/hw/amso1100/c2.c | |
parent | f93b97fd65072de626c074dbe099a1fff05ce060 (diff) |
These changes are the raw update to linux-4.4.6-rt14. Kernel sources
are taken from kernel.org, and rt patch from the rt wiki download page.
During the rebasing, the following patch collided:
Force tick interrupt and get rid of softirq magic(I70131fb85).
Collisions have been removed because its logic was found on the
source already.
Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>
Diffstat (limited to 'kernel/drivers/infiniband/hw/amso1100/c2.c')
-rw-r--r-- | kernel/drivers/infiniband/hw/amso1100/c2.c | 1241 |
1 files changed, 0 insertions, 1241 deletions
diff --git a/kernel/drivers/infiniband/hw/amso1100/c2.c b/kernel/drivers/infiniband/hw/amso1100/c2.c deleted file mode 100644 index 766a71cce..000000000 --- a/kernel/drivers/infiniband/hw/amso1100/c2.c +++ /dev/null @@ -1,1241 +0,0 @@ -/* - * Copyright (c) 2005 Ammasso, Inc. All rights reserved. - * Copyright (c) 2005 Open Grid Computing, Inc. All rights reserved. - * - * This software is available to you under a choice of one of two - * licenses. You may choose to be licensed under the terms of the GNU - * General Public License (GPL) Version 2, available from the file - * COPYING in the main directory of this source tree, or the - * OpenIB.org BSD license below: - * - * Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * - Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * - * - Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS - * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN - * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - */ -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/pci.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/inetdevice.h> -#include <linux/interrupt.h> -#include <linux/delay.h> -#include <linux/ethtool.h> -#include <linux/mii.h> -#include <linux/if_vlan.h> -#include <linux/crc32.h> -#include <linux/in.h> -#include <linux/ip.h> -#include <linux/tcp.h> -#include <linux/init.h> -#include <linux/dma-mapping.h> -#include <linux/slab.h> -#include <linux/prefetch.h> - -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/byteorder.h> - -#include <rdma/ib_smi.h> -#include "c2.h" -#include "c2_provider.h" - -MODULE_AUTHOR("Tom Tucker <tom@opengridcomputing.com>"); -MODULE_DESCRIPTION("Ammasso AMSO1100 Low-level iWARP Driver"); -MODULE_LICENSE("Dual BSD/GPL"); -MODULE_VERSION(DRV_VERSION); - -static const u32 default_msg = NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK - | NETIF_MSG_IFUP | NETIF_MSG_IFDOWN; - -static int debug = -1; /* defaults above */ -module_param(debug, int, 0); -MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)"); - -static int c2_up(struct net_device *netdev); -static int c2_down(struct net_device *netdev); -static int c2_xmit_frame(struct sk_buff *skb, struct net_device *netdev); -static void c2_tx_interrupt(struct net_device *netdev); -static void c2_rx_interrupt(struct net_device *netdev); -static irqreturn_t c2_interrupt(int irq, void *dev_id); -static void c2_tx_timeout(struct net_device *netdev); -static int c2_change_mtu(struct net_device *netdev, int new_mtu); -static void c2_reset(struct c2_port *c2_port); - -static struct pci_device_id c2_pci_table[] = { - { PCI_DEVICE(0x18b8, 0xb001) }, - { 0 } -}; - -MODULE_DEVICE_TABLE(pci, c2_pci_table); - -static void c2_print_macaddr(struct net_device *netdev) -{ - pr_debug("%s: MAC %pM, IRQ %u\n", netdev->name, netdev->dev_addr, netdev->irq); -} - -static void c2_set_rxbufsize(struct c2_port *c2_port) -{ - struct net_device *netdev = c2_port->netdev; - - if (netdev->mtu > RX_BUF_SIZE) - c2_port->rx_buf_size = - netdev->mtu + ETH_HLEN + sizeof(struct c2_rxp_hdr) + - NET_IP_ALIGN; - else - c2_port->rx_buf_size = sizeof(struct c2_rxp_hdr) + RX_BUF_SIZE; -} - -/* - * Allocate TX ring elements and chain them together. - * One-to-one association of adapter descriptors with ring elements. - */ -static int c2_tx_ring_alloc(struct c2_ring *tx_ring, void *vaddr, - dma_addr_t base, void __iomem * mmio_txp_ring) -{ - struct c2_tx_desc *tx_desc; - struct c2_txp_desc __iomem *txp_desc; - struct c2_element *elem; - int i; - - tx_ring->start = kmalloc(sizeof(*elem) * tx_ring->count, GFP_KERNEL); - if (!tx_ring->start) - return -ENOMEM; - - elem = tx_ring->start; - tx_desc = vaddr; - txp_desc = mmio_txp_ring; - for (i = 0; i < tx_ring->count; i++, elem++, tx_desc++, txp_desc++) { - tx_desc->len = 0; - tx_desc->status = 0; - - /* Set TXP_HTXD_UNINIT */ - __raw_writeq((__force u64) cpu_to_be64(0x1122334455667788ULL), - (void __iomem *) txp_desc + C2_TXP_ADDR); - __raw_writew(0, (void __iomem *) txp_desc + C2_TXP_LEN); - __raw_writew((__force u16) cpu_to_be16(TXP_HTXD_UNINIT), - (void __iomem *) txp_desc + C2_TXP_FLAGS); - - elem->skb = NULL; - elem->ht_desc = tx_desc; - elem->hw_desc = txp_desc; - - if (i == tx_ring->count - 1) { - elem->next = tx_ring->start; - tx_desc->next_offset = base; - } else { - elem->next = elem + 1; - tx_desc->next_offset = - base + (i + 1) * sizeof(*tx_desc); - } - } - - tx_ring->to_use = tx_ring->to_clean = tx_ring->start; - - return 0; -} - -/* - * Allocate RX ring elements and chain them together. - * One-to-one association of adapter descriptors with ring elements. - */ -static int c2_rx_ring_alloc(struct c2_ring *rx_ring, void *vaddr, - dma_addr_t base, void __iomem * mmio_rxp_ring) -{ - struct c2_rx_desc *rx_desc; - struct c2_rxp_desc __iomem *rxp_desc; - struct c2_element *elem; - int i; - - rx_ring->start = kmalloc(sizeof(*elem) * rx_ring->count, GFP_KERNEL); - if (!rx_ring->start) - return -ENOMEM; - - elem = rx_ring->start; - rx_desc = vaddr; - rxp_desc = mmio_rxp_ring; - for (i = 0; i < rx_ring->count; i++, elem++, rx_desc++, rxp_desc++) { - rx_desc->len = 0; - rx_desc->status = 0; - - /* Set RXP_HRXD_UNINIT */ - __raw_writew((__force u16) cpu_to_be16(RXP_HRXD_OK), - (void __iomem *) rxp_desc + C2_RXP_STATUS); - __raw_writew(0, (void __iomem *) rxp_desc + C2_RXP_COUNT); - __raw_writew(0, (void __iomem *) rxp_desc + C2_RXP_LEN); - __raw_writeq((__force u64) cpu_to_be64(0x99aabbccddeeffULL), - (void __iomem *) rxp_desc + C2_RXP_ADDR); - __raw_writew((__force u16) cpu_to_be16(RXP_HRXD_UNINIT), - (void __iomem *) rxp_desc + C2_RXP_FLAGS); - - elem->skb = NULL; - elem->ht_desc = rx_desc; - elem->hw_desc = rxp_desc; - - if (i == rx_ring->count - 1) { - elem->next = rx_ring->start; - rx_desc->next_offset = base; - } else { - elem->next = elem + 1; - rx_desc->next_offset = - base + (i + 1) * sizeof(*rx_desc); - } - } - - rx_ring->to_use = rx_ring->to_clean = rx_ring->start; - - return 0; -} - -/* Setup buffer for receiving */ -static inline int c2_rx_alloc(struct c2_port *c2_port, struct c2_element *elem) -{ - struct c2_dev *c2dev = c2_port->c2dev; - struct c2_rx_desc *rx_desc = elem->ht_desc; - struct sk_buff *skb; - dma_addr_t mapaddr; - u32 maplen; - struct c2_rxp_hdr *rxp_hdr; - - skb = dev_alloc_skb(c2_port->rx_buf_size); - if (unlikely(!skb)) { - pr_debug("%s: out of memory for receive\n", - c2_port->netdev->name); - return -ENOMEM; - } - - /* Zero out the rxp hdr in the sk_buff */ - memset(skb->data, 0, sizeof(*rxp_hdr)); - - skb->dev = c2_port->netdev; - - maplen = c2_port->rx_buf_size; - mapaddr = - pci_map_single(c2dev->pcidev, skb->data, maplen, - PCI_DMA_FROMDEVICE); - - /* Set the sk_buff RXP_header to RXP_HRXD_READY */ - rxp_hdr = (struct c2_rxp_hdr *) skb->data; - rxp_hdr->flags = RXP_HRXD_READY; - - __raw_writew(0, elem->hw_desc + C2_RXP_STATUS); - __raw_writew((__force u16) cpu_to_be16((u16) maplen - sizeof(*rxp_hdr)), - elem->hw_desc + C2_RXP_LEN); - __raw_writeq((__force u64) cpu_to_be64(mapaddr), elem->hw_desc + C2_RXP_ADDR); - __raw_writew((__force u16) cpu_to_be16(RXP_HRXD_READY), - elem->hw_desc + C2_RXP_FLAGS); - - elem->skb = skb; - elem->mapaddr = mapaddr; - elem->maplen = maplen; - rx_desc->len = maplen; - - return 0; -} - -/* - * Allocate buffers for the Rx ring - * For receive: rx_ring.to_clean is next received frame - */ -static int c2_rx_fill(struct c2_port *c2_port) -{ - struct c2_ring *rx_ring = &c2_port->rx_ring; - struct c2_element *elem; - int ret = 0; - - elem = rx_ring->start; - do { - if (c2_rx_alloc(c2_port, elem)) { - ret = 1; - break; - } - } while ((elem = elem->next) != rx_ring->start); - - rx_ring->to_clean = rx_ring->start; - return ret; -} - -/* Free all buffers in RX ring, assumes receiver stopped */ -static void c2_rx_clean(struct c2_port *c2_port) -{ - struct c2_dev *c2dev = c2_port->c2dev; - struct c2_ring *rx_ring = &c2_port->rx_ring; - struct c2_element *elem; - struct c2_rx_desc *rx_desc; - - elem = rx_ring->start; - do { - rx_desc = elem->ht_desc; - rx_desc->len = 0; - - __raw_writew(0, elem->hw_desc + C2_RXP_STATUS); - __raw_writew(0, elem->hw_desc + C2_RXP_COUNT); - __raw_writew(0, elem->hw_desc + C2_RXP_LEN); - __raw_writeq((__force u64) cpu_to_be64(0x99aabbccddeeffULL), - elem->hw_desc + C2_RXP_ADDR); - __raw_writew((__force u16) cpu_to_be16(RXP_HRXD_UNINIT), - elem->hw_desc + C2_RXP_FLAGS); - - if (elem->skb) { - pci_unmap_single(c2dev->pcidev, elem->mapaddr, - elem->maplen, PCI_DMA_FROMDEVICE); - dev_kfree_skb(elem->skb); - elem->skb = NULL; - } - } while ((elem = elem->next) != rx_ring->start); -} - -static inline int c2_tx_free(struct c2_dev *c2dev, struct c2_element *elem) -{ - struct c2_tx_desc *tx_desc = elem->ht_desc; - - tx_desc->len = 0; - - pci_unmap_single(c2dev->pcidev, elem->mapaddr, elem->maplen, - PCI_DMA_TODEVICE); - - if (elem->skb) { - dev_kfree_skb_any(elem->skb); - elem->skb = NULL; - } - - return 0; -} - -/* Free all buffers in TX ring, assumes transmitter stopped */ -static void c2_tx_clean(struct c2_port *c2_port) -{ - struct c2_ring *tx_ring = &c2_port->tx_ring; - struct c2_element *elem; - struct c2_txp_desc txp_htxd; - int retry; - unsigned long flags; - - spin_lock_irqsave(&c2_port->tx_lock, flags); - - elem = tx_ring->start; - - do { - retry = 0; - do { - txp_htxd.flags = - readw(elem->hw_desc + C2_TXP_FLAGS); - - if (txp_htxd.flags == TXP_HTXD_READY) { - retry = 1; - __raw_writew(0, - elem->hw_desc + C2_TXP_LEN); - __raw_writeq(0, - elem->hw_desc + C2_TXP_ADDR); - __raw_writew((__force u16) cpu_to_be16(TXP_HTXD_DONE), - elem->hw_desc + C2_TXP_FLAGS); - c2_port->netdev->stats.tx_dropped++; - break; - } else { - __raw_writew(0, - elem->hw_desc + C2_TXP_LEN); - __raw_writeq((__force u64) cpu_to_be64(0x1122334455667788ULL), - elem->hw_desc + C2_TXP_ADDR); - __raw_writew((__force u16) cpu_to_be16(TXP_HTXD_UNINIT), - elem->hw_desc + C2_TXP_FLAGS); - } - - c2_tx_free(c2_port->c2dev, elem); - - } while ((elem = elem->next) != tx_ring->start); - } while (retry); - - c2_port->tx_avail = c2_port->tx_ring.count - 1; - c2_port->c2dev->cur_tx = tx_ring->to_use - tx_ring->start; - - if (c2_port->tx_avail > MAX_SKB_FRAGS + 1) - netif_wake_queue(c2_port->netdev); - - spin_unlock_irqrestore(&c2_port->tx_lock, flags); -} - -/* - * Process transmit descriptors marked 'DONE' by the firmware, - * freeing up their unneeded sk_buffs. - */ -static void c2_tx_interrupt(struct net_device *netdev) -{ - struct c2_port *c2_port = netdev_priv(netdev); - struct c2_dev *c2dev = c2_port->c2dev; - struct c2_ring *tx_ring = &c2_port->tx_ring; - struct c2_element *elem; - struct c2_txp_desc txp_htxd; - - spin_lock(&c2_port->tx_lock); - - for (elem = tx_ring->to_clean; elem != tx_ring->to_use; - elem = elem->next) { - txp_htxd.flags = - be16_to_cpu((__force __be16) readw(elem->hw_desc + C2_TXP_FLAGS)); - - if (txp_htxd.flags != TXP_HTXD_DONE) - break; - - if (netif_msg_tx_done(c2_port)) { - /* PCI reads are expensive in fast path */ - txp_htxd.len = - be16_to_cpu((__force __be16) readw(elem->hw_desc + C2_TXP_LEN)); - pr_debug("%s: tx done slot %3Zu status 0x%x len " - "%5u bytes\n", - netdev->name, elem - tx_ring->start, - txp_htxd.flags, txp_htxd.len); - } - - c2_tx_free(c2dev, elem); - ++(c2_port->tx_avail); - } - - tx_ring->to_clean = elem; - - if (netif_queue_stopped(netdev) - && c2_port->tx_avail > MAX_SKB_FRAGS + 1) - netif_wake_queue(netdev); - - spin_unlock(&c2_port->tx_lock); -} - -static void c2_rx_error(struct c2_port *c2_port, struct c2_element *elem) -{ - struct c2_rx_desc *rx_desc = elem->ht_desc; - struct c2_rxp_hdr *rxp_hdr = (struct c2_rxp_hdr *) elem->skb->data; - - if (rxp_hdr->status != RXP_HRXD_OK || - rxp_hdr->len > (rx_desc->len - sizeof(*rxp_hdr))) { - pr_debug("BAD RXP_HRXD\n"); - pr_debug(" rx_desc : %p\n", rx_desc); - pr_debug(" index : %Zu\n", - elem - c2_port->rx_ring.start); - pr_debug(" len : %u\n", rx_desc->len); - pr_debug(" rxp_hdr : %p [PA %p]\n", rxp_hdr, - (void *) __pa((unsigned long) rxp_hdr)); - pr_debug(" flags : 0x%x\n", rxp_hdr->flags); - pr_debug(" status: 0x%x\n", rxp_hdr->status); - pr_debug(" len : %u\n", rxp_hdr->len); - pr_debug(" rsvd : 0x%x\n", rxp_hdr->rsvd); - } - - /* Setup the skb for reuse since we're dropping this pkt */ - elem->skb->data = elem->skb->head; - skb_reset_tail_pointer(elem->skb); - - /* Zero out the rxp hdr in the sk_buff */ - memset(elem->skb->data, 0, sizeof(*rxp_hdr)); - - /* Write the descriptor to the adapter's rx ring */ - __raw_writew(0, elem->hw_desc + C2_RXP_STATUS); - __raw_writew(0, elem->hw_desc + C2_RXP_COUNT); - __raw_writew((__force u16) cpu_to_be16((u16) elem->maplen - sizeof(*rxp_hdr)), - elem->hw_desc + C2_RXP_LEN); - __raw_writeq((__force u64) cpu_to_be64(elem->mapaddr), - elem->hw_desc + C2_RXP_ADDR); - __raw_writew((__force u16) cpu_to_be16(RXP_HRXD_READY), - elem->hw_desc + C2_RXP_FLAGS); - - pr_debug("packet dropped\n"); - c2_port->netdev->stats.rx_dropped++; -} - -static void c2_rx_interrupt(struct net_device *netdev) -{ - struct c2_port *c2_port = netdev_priv(netdev); - struct c2_dev *c2dev = c2_port->c2dev; - struct c2_ring *rx_ring = &c2_port->rx_ring; - struct c2_element *elem; - struct c2_rx_desc *rx_desc; - struct c2_rxp_hdr *rxp_hdr; - struct sk_buff *skb; - dma_addr_t mapaddr; - u32 maplen, buflen; - unsigned long flags; - - spin_lock_irqsave(&c2dev->lock, flags); - - /* Begin where we left off */ - rx_ring->to_clean = rx_ring->start + c2dev->cur_rx; - - for (elem = rx_ring->to_clean; elem->next != rx_ring->to_clean; - elem = elem->next) { - rx_desc = elem->ht_desc; - mapaddr = elem->mapaddr; - maplen = elem->maplen; - skb = elem->skb; - rxp_hdr = (struct c2_rxp_hdr *) skb->data; - - if (rxp_hdr->flags != RXP_HRXD_DONE) - break; - buflen = rxp_hdr->len; - - /* Sanity check the RXP header */ - if (rxp_hdr->status != RXP_HRXD_OK || - buflen > (rx_desc->len - sizeof(*rxp_hdr))) { - c2_rx_error(c2_port, elem); - continue; - } - - /* - * Allocate and map a new skb for replenishing the host - * RX desc - */ - if (c2_rx_alloc(c2_port, elem)) { - c2_rx_error(c2_port, elem); - continue; - } - - /* Unmap the old skb */ - pci_unmap_single(c2dev->pcidev, mapaddr, maplen, - PCI_DMA_FROMDEVICE); - - prefetch(skb->data); - - /* - * Skip past the leading 8 bytes comprising of the - * "struct c2_rxp_hdr", prepended by the adapter - * to the usual Ethernet header ("struct ethhdr"), - * to the start of the raw Ethernet packet. - * - * Fix up the various fields in the sk_buff before - * passing it up to netif_rx(). The transfer size - * (in bytes) specified by the adapter len field of - * the "struct rxp_hdr_t" does NOT include the - * "sizeof(struct c2_rxp_hdr)". - */ - skb->data += sizeof(*rxp_hdr); - skb_set_tail_pointer(skb, buflen); - skb->len = buflen; - skb->protocol = eth_type_trans(skb, netdev); - - netif_rx(skb); - - netdev->stats.rx_packets++; - netdev->stats.rx_bytes += buflen; - } - - /* Save where we left off */ - rx_ring->to_clean = elem; - c2dev->cur_rx = elem - rx_ring->start; - C2_SET_CUR_RX(c2dev, c2dev->cur_rx); - - spin_unlock_irqrestore(&c2dev->lock, flags); -} - -/* - * Handle netisr0 TX & RX interrupts. - */ -static irqreturn_t c2_interrupt(int irq, void *dev_id) -{ - unsigned int netisr0, dmaisr; - int handled = 0; - struct c2_dev *c2dev = (struct c2_dev *) dev_id; - - /* Process CCILNET interrupts */ - netisr0 = readl(c2dev->regs + C2_NISR0); - if (netisr0) { - - /* - * There is an issue with the firmware that always - * provides the status of RX for both TX & RX - * interrupts. So process both queues here. - */ - c2_rx_interrupt(c2dev->netdev); - c2_tx_interrupt(c2dev->netdev); - - /* Clear the interrupt */ - writel(netisr0, c2dev->regs + C2_NISR0); - handled++; - } - - /* Process RNIC interrupts */ - dmaisr = readl(c2dev->regs + C2_DISR); - if (dmaisr) { - writel(dmaisr, c2dev->regs + C2_DISR); - c2_rnic_interrupt(c2dev); - handled++; - } - - if (handled) { - return IRQ_HANDLED; - } else { - return IRQ_NONE; - } -} - -static int c2_up(struct net_device *netdev) -{ - struct c2_port *c2_port = netdev_priv(netdev); - struct c2_dev *c2dev = c2_port->c2dev; - struct c2_element *elem; - struct c2_rxp_hdr *rxp_hdr; - struct in_device *in_dev; - size_t rx_size, tx_size; - int ret, i; - unsigned int netimr0; - - if (netif_msg_ifup(c2_port)) - pr_debug("%s: enabling interface\n", netdev->name); - - /* Set the Rx buffer size based on MTU */ - c2_set_rxbufsize(c2_port); - - /* Allocate DMA'able memory for Tx/Rx host descriptor rings */ - rx_size = c2_port->rx_ring.count * sizeof(struct c2_rx_desc); - tx_size = c2_port->tx_ring.count * sizeof(struct c2_tx_desc); - - c2_port->mem_size = tx_size + rx_size; - c2_port->mem = pci_zalloc_consistent(c2dev->pcidev, c2_port->mem_size, - &c2_port->dma); - if (c2_port->mem == NULL) { - pr_debug("Unable to allocate memory for " - "host descriptor rings\n"); - return -ENOMEM; - } - - /* Create the Rx host descriptor ring */ - if ((ret = - c2_rx_ring_alloc(&c2_port->rx_ring, c2_port->mem, c2_port->dma, - c2dev->mmio_rxp_ring))) { - pr_debug("Unable to create RX ring\n"); - goto bail0; - } - - /* Allocate Rx buffers for the host descriptor ring */ - if (c2_rx_fill(c2_port)) { - pr_debug("Unable to fill RX ring\n"); - goto bail1; - } - - /* Create the Tx host descriptor ring */ - if ((ret = c2_tx_ring_alloc(&c2_port->tx_ring, c2_port->mem + rx_size, - c2_port->dma + rx_size, - c2dev->mmio_txp_ring))) { - pr_debug("Unable to create TX ring\n"); - goto bail1; - } - - /* Set the TX pointer to where we left off */ - c2_port->tx_avail = c2_port->tx_ring.count - 1; - c2_port->tx_ring.to_use = c2_port->tx_ring.to_clean = - c2_port->tx_ring.start + c2dev->cur_tx; - - /* missing: Initialize MAC */ - - BUG_ON(c2_port->tx_ring.to_use != c2_port->tx_ring.to_clean); - - /* Reset the adapter, ensures the driver is in sync with the RXP */ - c2_reset(c2_port); - - /* Reset the READY bit in the sk_buff RXP headers & adapter HRXDQ */ - for (i = 0, elem = c2_port->rx_ring.start; i < c2_port->rx_ring.count; - i++, elem++) { - rxp_hdr = (struct c2_rxp_hdr *) elem->skb->data; - rxp_hdr->flags = 0; - __raw_writew((__force u16) cpu_to_be16(RXP_HRXD_READY), - elem->hw_desc + C2_RXP_FLAGS); - } - - /* Enable network packets */ - netif_start_queue(netdev); - - /* Enable IRQ */ - writel(0, c2dev->regs + C2_IDIS); - netimr0 = readl(c2dev->regs + C2_NIMR0); - netimr0 &= ~(C2_PCI_HTX_INT | C2_PCI_HRX_INT); - writel(netimr0, c2dev->regs + C2_NIMR0); - - /* Tell the stack to ignore arp requests for ipaddrs bound to - * other interfaces. This is needed to prevent the host stack - * from responding to arp requests to the ipaddr bound on the - * rdma interface. - */ - in_dev = in_dev_get(netdev); - IN_DEV_CONF_SET(in_dev, ARP_IGNORE, 1); - in_dev_put(in_dev); - - return 0; - - bail1: - c2_rx_clean(c2_port); - kfree(c2_port->rx_ring.start); - - bail0: - pci_free_consistent(c2dev->pcidev, c2_port->mem_size, c2_port->mem, - c2_port->dma); - - return ret; -} - -static int c2_down(struct net_device *netdev) -{ - struct c2_port *c2_port = netdev_priv(netdev); - struct c2_dev *c2dev = c2_port->c2dev; - - if (netif_msg_ifdown(c2_port)) - pr_debug("%s: disabling interface\n", - netdev->name); - - /* Wait for all the queued packets to get sent */ - c2_tx_interrupt(netdev); - - /* Disable network packets */ - netif_stop_queue(netdev); - - /* Disable IRQs by clearing the interrupt mask */ - writel(1, c2dev->regs + C2_IDIS); - writel(0, c2dev->regs + C2_NIMR0); - - /* missing: Stop transmitter */ - - /* missing: Stop receiver */ - - /* Reset the adapter, ensures the driver is in sync with the RXP */ - c2_reset(c2_port); - - /* missing: Turn off LEDs here */ - - /* Free all buffers in the host descriptor rings */ - c2_tx_clean(c2_port); - c2_rx_clean(c2_port); - - /* Free the host descriptor rings */ - kfree(c2_port->rx_ring.start); - kfree(c2_port->tx_ring.start); - pci_free_consistent(c2dev->pcidev, c2_port->mem_size, c2_port->mem, - c2_port->dma); - - return 0; -} - -static void c2_reset(struct c2_port *c2_port) -{ - struct c2_dev *c2dev = c2_port->c2dev; - unsigned int cur_rx = c2dev->cur_rx; - - /* Tell the hardware to quiesce */ - C2_SET_CUR_RX(c2dev, cur_rx | C2_PCI_HRX_QUI); - - /* - * The hardware will reset the C2_PCI_HRX_QUI bit once - * the RXP is quiesced. Wait 2 seconds for this. - */ - ssleep(2); - - cur_rx = C2_GET_CUR_RX(c2dev); - - if (cur_rx & C2_PCI_HRX_QUI) - pr_debug("c2_reset: failed to quiesce the hardware!\n"); - - cur_rx &= ~C2_PCI_HRX_QUI; - - c2dev->cur_rx = cur_rx; - - pr_debug("Current RX: %u\n", c2dev->cur_rx); -} - -static int c2_xmit_frame(struct sk_buff *skb, struct net_device *netdev) -{ - struct c2_port *c2_port = netdev_priv(netdev); - struct c2_dev *c2dev = c2_port->c2dev; - struct c2_ring *tx_ring = &c2_port->tx_ring; - struct c2_element *elem; - dma_addr_t mapaddr; - u32 maplen; - unsigned long flags; - unsigned int i; - - spin_lock_irqsave(&c2_port->tx_lock, flags); - - if (unlikely(c2_port->tx_avail < (skb_shinfo(skb)->nr_frags + 1))) { - netif_stop_queue(netdev); - spin_unlock_irqrestore(&c2_port->tx_lock, flags); - - pr_debug("%s: Tx ring full when queue awake!\n", - netdev->name); - return NETDEV_TX_BUSY; - } - - maplen = skb_headlen(skb); - mapaddr = - pci_map_single(c2dev->pcidev, skb->data, maplen, PCI_DMA_TODEVICE); - - elem = tx_ring->to_use; - elem->skb = skb; - elem->mapaddr = mapaddr; - elem->maplen = maplen; - - /* Tell HW to xmit */ - __raw_writeq((__force u64) cpu_to_be64(mapaddr), - elem->hw_desc + C2_TXP_ADDR); - __raw_writew((__force u16) cpu_to_be16(maplen), - elem->hw_desc + C2_TXP_LEN); - __raw_writew((__force u16) cpu_to_be16(TXP_HTXD_READY), - elem->hw_desc + C2_TXP_FLAGS); - - netdev->stats.tx_packets++; - netdev->stats.tx_bytes += maplen; - - /* Loop thru additional data fragments and queue them */ - if (skb_shinfo(skb)->nr_frags) { - for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { - const skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; - maplen = skb_frag_size(frag); - mapaddr = skb_frag_dma_map(&c2dev->pcidev->dev, frag, - 0, maplen, DMA_TO_DEVICE); - elem = elem->next; - elem->skb = NULL; - elem->mapaddr = mapaddr; - elem->maplen = maplen; - - /* Tell HW to xmit */ - __raw_writeq((__force u64) cpu_to_be64(mapaddr), - elem->hw_desc + C2_TXP_ADDR); - __raw_writew((__force u16) cpu_to_be16(maplen), - elem->hw_desc + C2_TXP_LEN); - __raw_writew((__force u16) cpu_to_be16(TXP_HTXD_READY), - elem->hw_desc + C2_TXP_FLAGS); - - netdev->stats.tx_packets++; - netdev->stats.tx_bytes += maplen; - } - } - - tx_ring->to_use = elem->next; - c2_port->tx_avail -= (skb_shinfo(skb)->nr_frags + 1); - - if (c2_port->tx_avail <= MAX_SKB_FRAGS + 1) { - netif_stop_queue(netdev); - if (netif_msg_tx_queued(c2_port)) - pr_debug("%s: transmit queue full\n", - netdev->name); - } - - spin_unlock_irqrestore(&c2_port->tx_lock, flags); - - netdev->trans_start = jiffies; - - return NETDEV_TX_OK; -} - -static void c2_tx_timeout(struct net_device *netdev) -{ - struct c2_port *c2_port = netdev_priv(netdev); - - if (netif_msg_timer(c2_port)) - pr_debug("%s: tx timeout\n", netdev->name); - - c2_tx_clean(c2_port); -} - -static int c2_change_mtu(struct net_device *netdev, int new_mtu) -{ - int ret = 0; - - if (new_mtu < ETH_ZLEN || new_mtu > ETH_JUMBO_MTU) - return -EINVAL; - - netdev->mtu = new_mtu; - - if (netif_running(netdev)) { - c2_down(netdev); - - c2_up(netdev); - } - - return ret; -} - -static const struct net_device_ops c2_netdev = { - .ndo_open = c2_up, - .ndo_stop = c2_down, - .ndo_start_xmit = c2_xmit_frame, - .ndo_tx_timeout = c2_tx_timeout, - .ndo_change_mtu = c2_change_mtu, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, -}; - -/* Initialize network device */ -static struct net_device *c2_devinit(struct c2_dev *c2dev, - void __iomem * mmio_addr) -{ - struct c2_port *c2_port = NULL; - struct net_device *netdev = alloc_etherdev(sizeof(*c2_port)); - - if (!netdev) { - pr_debug("c2_port etherdev alloc failed"); - return NULL; - } - - SET_NETDEV_DEV(netdev, &c2dev->pcidev->dev); - - netdev->netdev_ops = &c2_netdev; - netdev->watchdog_timeo = C2_TX_TIMEOUT; - netdev->irq = c2dev->pcidev->irq; - - c2_port = netdev_priv(netdev); - c2_port->netdev = netdev; - c2_port->c2dev = c2dev; - c2_port->msg_enable = netif_msg_init(debug, default_msg); - c2_port->tx_ring.count = C2_NUM_TX_DESC; - c2_port->rx_ring.count = C2_NUM_RX_DESC; - - spin_lock_init(&c2_port->tx_lock); - - /* Copy our 48-bit ethernet hardware address */ - memcpy_fromio(netdev->dev_addr, mmio_addr + C2_REGS_ENADDR, 6); - - /* Validate the MAC address */ - if (!is_valid_ether_addr(netdev->dev_addr)) { - pr_debug("Invalid MAC Address\n"); - c2_print_macaddr(netdev); - free_netdev(netdev); - return NULL; - } - - c2dev->netdev = netdev; - - return netdev; -} - -static int c2_probe(struct pci_dev *pcidev, const struct pci_device_id *ent) -{ - int ret = 0, i; - unsigned long reg0_start, reg0_flags, reg0_len; - unsigned long reg2_start, reg2_flags, reg2_len; - unsigned long reg4_start, reg4_flags, reg4_len; - unsigned kva_map_size; - struct net_device *netdev = NULL; - struct c2_dev *c2dev = NULL; - void __iomem *mmio_regs = NULL; - - printk(KERN_INFO PFX "AMSO1100 Gigabit Ethernet driver v%s loaded\n", - DRV_VERSION); - - /* Enable PCI device */ - ret = pci_enable_device(pcidev); - if (ret) { - printk(KERN_ERR PFX "%s: Unable to enable PCI device\n", - pci_name(pcidev)); - goto bail0; - } - - reg0_start = pci_resource_start(pcidev, BAR_0); - reg0_len = pci_resource_len(pcidev, BAR_0); - reg0_flags = pci_resource_flags(pcidev, BAR_0); - - reg2_start = pci_resource_start(pcidev, BAR_2); - reg2_len = pci_resource_len(pcidev, BAR_2); - reg2_flags = pci_resource_flags(pcidev, BAR_2); - - reg4_start = pci_resource_start(pcidev, BAR_4); - reg4_len = pci_resource_len(pcidev, BAR_4); - reg4_flags = pci_resource_flags(pcidev, BAR_4); - - pr_debug("BAR0 size = 0x%lX bytes\n", reg0_len); - pr_debug("BAR2 size = 0x%lX bytes\n", reg2_len); - pr_debug("BAR4 size = 0x%lX bytes\n", reg4_len); - - /* Make sure PCI base addr are MMIO */ - if (!(reg0_flags & IORESOURCE_MEM) || - !(reg2_flags & IORESOURCE_MEM) || !(reg4_flags & IORESOURCE_MEM)) { - printk(KERN_ERR PFX "PCI regions not an MMIO resource\n"); - ret = -ENODEV; - goto bail1; - } - - /* Check for weird/broken PCI region reporting */ - if ((reg0_len < C2_REG0_SIZE) || - (reg2_len < C2_REG2_SIZE) || (reg4_len < C2_REG4_SIZE)) { - printk(KERN_ERR PFX "Invalid PCI region sizes\n"); - ret = -ENODEV; - goto bail1; - } - - /* Reserve PCI I/O and memory resources */ - ret = pci_request_regions(pcidev, DRV_NAME); - if (ret) { - printk(KERN_ERR PFX "%s: Unable to request regions\n", - pci_name(pcidev)); - goto bail1; - } - - if ((sizeof(dma_addr_t) > 4)) { - ret = pci_set_dma_mask(pcidev, DMA_BIT_MASK(64)); - if (ret < 0) { - printk(KERN_ERR PFX "64b DMA configuration failed\n"); - goto bail2; - } - } else { - ret = pci_set_dma_mask(pcidev, DMA_BIT_MASK(32)); - if (ret < 0) { - printk(KERN_ERR PFX "32b DMA configuration failed\n"); - goto bail2; - } - } - - /* Enables bus-mastering on the device */ - pci_set_master(pcidev); - - /* Remap the adapter PCI registers in BAR4 */ - mmio_regs = ioremap_nocache(reg4_start + C2_PCI_REGS_OFFSET, - sizeof(struct c2_adapter_pci_regs)); - if (!mmio_regs) { - printk(KERN_ERR PFX - "Unable to remap adapter PCI registers in BAR4\n"); - ret = -EIO; - goto bail2; - } - - /* Validate PCI regs magic */ - for (i = 0; i < sizeof(c2_magic); i++) { - if (c2_magic[i] != readb(mmio_regs + C2_REGS_MAGIC + i)) { - printk(KERN_ERR PFX "Downlevel Firmware boot loader " - "[%d/%Zd: got 0x%x, exp 0x%x]. Use the cc_flash " - "utility to update your boot loader\n", - i + 1, sizeof(c2_magic), - readb(mmio_regs + C2_REGS_MAGIC + i), - c2_magic[i]); - printk(KERN_ERR PFX "Adapter not claimed\n"); - iounmap(mmio_regs); - ret = -EIO; - goto bail2; - } - } - - /* Validate the adapter version */ - if (be32_to_cpu((__force __be32) readl(mmio_regs + C2_REGS_VERS)) != C2_VERSION) { - printk(KERN_ERR PFX "Version mismatch " - "[fw=%u, c2=%u], Adapter not claimed\n", - be32_to_cpu((__force __be32) readl(mmio_regs + C2_REGS_VERS)), - C2_VERSION); - ret = -EINVAL; - iounmap(mmio_regs); - goto bail2; - } - - /* Validate the adapter IVN */ - if (be32_to_cpu((__force __be32) readl(mmio_regs + C2_REGS_IVN)) != C2_IVN) { - printk(KERN_ERR PFX "Downlevel FIrmware level. You should be using " - "the OpenIB device support kit. " - "[fw=0x%x, c2=0x%x], Adapter not claimed\n", - be32_to_cpu((__force __be32) readl(mmio_regs + C2_REGS_IVN)), - C2_IVN); - ret = -EINVAL; - iounmap(mmio_regs); - goto bail2; - } - - /* Allocate hardware structure */ - c2dev = (struct c2_dev *) ib_alloc_device(sizeof(*c2dev)); - if (!c2dev) { - printk(KERN_ERR PFX "%s: Unable to alloc hardware struct\n", - pci_name(pcidev)); - ret = -ENOMEM; - iounmap(mmio_regs); - goto bail2; - } - - memset(c2dev, 0, sizeof(*c2dev)); - spin_lock_init(&c2dev->lock); - c2dev->pcidev = pcidev; - c2dev->cur_tx = 0; - - /* Get the last RX index */ - c2dev->cur_rx = - (be32_to_cpu((__force __be32) readl(mmio_regs + C2_REGS_HRX_CUR)) - - 0xffffc000) / sizeof(struct c2_rxp_desc); - - /* Request an interrupt line for the driver */ - ret = request_irq(pcidev->irq, c2_interrupt, IRQF_SHARED, DRV_NAME, c2dev); - if (ret) { - printk(KERN_ERR PFX "%s: requested IRQ %u is busy\n", - pci_name(pcidev), pcidev->irq); - iounmap(mmio_regs); - goto bail3; - } - - /* Set driver specific data */ - pci_set_drvdata(pcidev, c2dev); - - /* Initialize network device */ - if ((netdev = c2_devinit(c2dev, mmio_regs)) == NULL) { - ret = -ENOMEM; - iounmap(mmio_regs); - goto bail4; - } - - /* Save off the actual size prior to unmapping mmio_regs */ - kva_map_size = be32_to_cpu((__force __be32) readl(mmio_regs + C2_REGS_PCI_WINSIZE)); - - /* Unmap the adapter PCI registers in BAR4 */ - iounmap(mmio_regs); - - /* Register network device */ - ret = register_netdev(netdev); - if (ret) { - printk(KERN_ERR PFX "Unable to register netdev, ret = %d\n", - ret); - goto bail5; - } - - /* Disable network packets */ - netif_stop_queue(netdev); - - /* Remap the adapter HRXDQ PA space to kernel VA space */ - c2dev->mmio_rxp_ring = ioremap_nocache(reg4_start + C2_RXP_HRXDQ_OFFSET, - C2_RXP_HRXDQ_SIZE); - if (!c2dev->mmio_rxp_ring) { - printk(KERN_ERR PFX "Unable to remap MMIO HRXDQ region\n"); - ret = -EIO; - goto bail6; - } - - /* Remap the adapter HTXDQ PA space to kernel VA space */ - c2dev->mmio_txp_ring = ioremap_nocache(reg4_start + C2_TXP_HTXDQ_OFFSET, - C2_TXP_HTXDQ_SIZE); - if (!c2dev->mmio_txp_ring) { - printk(KERN_ERR PFX "Unable to remap MMIO HTXDQ region\n"); - ret = -EIO; - goto bail7; - } - - /* Save off the current RX index in the last 4 bytes of the TXP Ring */ - C2_SET_CUR_RX(c2dev, c2dev->cur_rx); - - /* Remap the PCI registers in adapter BAR0 to kernel VA space */ - c2dev->regs = ioremap_nocache(reg0_start, reg0_len); - if (!c2dev->regs) { - printk(KERN_ERR PFX "Unable to remap BAR0\n"); - ret = -EIO; - goto bail8; - } - - /* Remap the PCI registers in adapter BAR4 to kernel VA space */ - c2dev->pa = reg4_start + C2_PCI_REGS_OFFSET; - c2dev->kva = ioremap_nocache(reg4_start + C2_PCI_REGS_OFFSET, - kva_map_size); - if (!c2dev->kva) { - printk(KERN_ERR PFX "Unable to remap BAR4\n"); - ret = -EIO; - goto bail9; - } - - /* Print out the MAC address */ - c2_print_macaddr(netdev); - - ret = c2_rnic_init(c2dev); - if (ret) { - printk(KERN_ERR PFX "c2_rnic_init failed: %d\n", ret); - goto bail10; - } - - ret = c2_register_device(c2dev); - if (ret) - goto bail10; - - return 0; - - bail10: - iounmap(c2dev->kva); - - bail9: - iounmap(c2dev->regs); - - bail8: - iounmap(c2dev->mmio_txp_ring); - - bail7: - iounmap(c2dev->mmio_rxp_ring); - - bail6: - unregister_netdev(netdev); - - bail5: - free_netdev(netdev); - - bail4: - free_irq(pcidev->irq, c2dev); - - bail3: - ib_dealloc_device(&c2dev->ibdev); - - bail2: - pci_release_regions(pcidev); - - bail1: - pci_disable_device(pcidev); - - bail0: - return ret; -} - -static void c2_remove(struct pci_dev *pcidev) -{ - struct c2_dev *c2dev = pci_get_drvdata(pcidev); - struct net_device *netdev = c2dev->netdev; - - /* Unregister with OpenIB */ - c2_unregister_device(c2dev); - - /* Clean up the RNIC resources */ - c2_rnic_term(c2dev); - - /* Remove network device from the kernel */ - unregister_netdev(netdev); - - /* Free network device */ - free_netdev(netdev); - - /* Free the interrupt line */ - free_irq(pcidev->irq, c2dev); - - /* missing: Turn LEDs off here */ - - /* Unmap adapter PA space */ - iounmap(c2dev->kva); - iounmap(c2dev->regs); - iounmap(c2dev->mmio_txp_ring); - iounmap(c2dev->mmio_rxp_ring); - - /* Free the hardware structure */ - ib_dealloc_device(&c2dev->ibdev); - - /* Release reserved PCI I/O and memory resources */ - pci_release_regions(pcidev); - - /* Disable PCI device */ - pci_disable_device(pcidev); - - /* Clear driver specific data */ - pci_set_drvdata(pcidev, NULL); -} - -static struct pci_driver c2_pci_driver = { - .name = DRV_NAME, - .id_table = c2_pci_table, - .probe = c2_probe, - .remove = c2_remove, -}; - -module_pci_driver(c2_pci_driver); |