These changes are the raw update to linux-4.4.6-rt14. Kernel sources

are taken from kernel.org, and rt patch from the rt wiki download page.

During the rebasing, the following patch collided:

Force tick interrupt and get rid of softirq magic(I70131fb85).

Collisions have been removed because its logic was found on the
source already.

Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>

1 files changed, 94 insertions, 2 deletions

diff --git a/kernel/drivers/iio/light/Kconfig b/kernel/drivers/iio/light/Kconfig
index 01a1a16ab..cfd3df841 100644
--- a/kernel/drivers/iio/light/Kconfig
+++ b/kernel/drivers/iio/light/Kconfig
@@ -5,6 +5,19 @@
 
 menu "Light sensors"
 
+config ACPI_ALS
+	tristate "ACPI Ambient Light Sensor"
+	depends on ACPI
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	select IIO_KFIFO_BUF
+	help
+	 Say Y here if you want to build a driver for the ACPI0008
+	 Ambient Light Sensor.
+
+	 To compile this driver as a module, choose M here: the module will
+	 be called acpi-als.
+
 config ADJD_S311
 	tristate "ADJD-S311-CR999 digital color sensor"
 	select IIO_BUFFER
@@ -37,6 +50,29 @@ config APDS9300
 	 To compile this driver as a module, choose M here: the
 	 module will be called apds9300.
 
+config APDS9960
+	tristate "Avago APDS9960 gesture/RGB/ALS/proximity sensor"
+	select REGMAP_I2C
+	select IIO_BUFFER
+	select IIO_KFIFO_BUF
+	depends on I2C
+	help
+	  Say Y here to build I2C interface support for the Avago
+	  APDS9960 gesture/RGB/ALS/proximity sensor.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called apds9960
+
+config BH1750
+	tristate "ROHM BH1750 ambient light sensor"
+	depends on I2C
+	help
+	 Say Y here to build support for the ROHM BH1710, BH1715, BH1721,
+	 BH1750, BH1751 ambient light sensors.
+
+	 To compile this driver as a module, choose M here: the module will
+	 be called bh1750.
+
 config CM32181
 	depends on I2C
 	tristate "CM32181 driver"
@@ -63,7 +99,7 @@ config CM3323
 	depends on I2C
 	tristate "Capella CM3323 color light sensor"
 	help
-	 Say Y here if you want to build a driver for Capela CM3323
+	 Say Y here if you want to build a driver for Capella CM3323
 	 color sensor.
 
 	 To compile this driver as a module, choose M here: the module will
@@ -145,6 +181,17 @@ config JSA1212
 	 To compile this driver as a module, choose M here:
 	 the module will be called jsa1212.
 
+config RPR0521
+	tristate "ROHM RPR0521 ALS and proximity sensor driver"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	 Say Y here if you want to build support for ROHM's RPR0521
+	 ambient light and proximity sensor device.
+
+	 To compile this driver as a module, choose M here:
+	 the module will be called rpr0521.
+
 config SENSORS_LM3533
 	tristate "LM3533 ambient light sensor"
 	depends on MFD_LM3533
@@ -165,15 +212,50 @@ config SENSORS_LM3533
 config LTR501
 	tristate "LTR-501ALS-01 light sensor"
 	depends on I2C
+	select REGMAP_I2C
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 	help
 	 If you say yes here you get support for the Lite-On LTR-501ALS-01
-	 ambient light and proximity sensor.
+	 ambient light and proximity sensor. This driver also supports LTR-559
+	 ALS/PS or LTR-301 ALS sensors.
 
 	 This driver can also be built as a module.  If so, the module
          will be called ltr501.
 
+config OPT3001
+	tristate "Texas Instruments OPT3001 Light Sensor"
+	depends on I2C
+	help
+	  If you say Y or M here, you get support for Texas Instruments
+	  OPT3001 Ambient Light Sensor.
+
+	  If built as a dynamically linked module, it will be called
+	  opt3001.
+
+config PA12203001
+        tristate "TXC PA12203001 light and proximity sensor"
+        depends on I2C
+        select REGMAP_I2C
+        help
+         If you say yes here you get support for the TXC PA12203001
+         ambient light and proximity sensor.
+
+         This driver can also be built as a module.  If so, the module
+         will be called pa12203001.
+
+config STK3310
+	tristate "STK3310 ALS and proximity sensor"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	 Say yes here to get support for the Sensortek STK3310 ambient light
+	 and proximity sensor. The STK3311 model is also supported by this
+	 driver.
+
+	 Choosing M will build the driver as a module. If so, the module
+	 will be called stk3310.
+
 config TCS3414
 	tristate "TAOS TCS3414 digital color sensor"
 	depends on I2C
@@ -218,6 +300,16 @@ config TSL4531
 	 To compile this driver as a module, choose M here: the
 	 module will be called tsl4531.
 
+config US5182D
+	tristate "UPISEMI light and proximity sensor"
+	depends on I2C
+	help
+	 If you say yes here you get support for the UPISEMI US5182D
+	 ambient light and proximity sensor.
+
+	 This driver can also be built as a module.  If so, the module
+	 will be called us5182d.
+
 config VCNL4000
 	tristate "VCNL4000 combined ALS and proximity sensor"
 	depends on I2C