diff options
author | 2015-08-04 12:17:53 -0700 | |
---|---|---|
committer | 2015-08-04 15:44:42 -0700 | |
commit | 9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 (patch) | |
tree | 1c9cafbcd35f783a87880a10f85d1a060db1a563 /kernel/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | |
parent | 98260f3884f4a202f9ca5eabed40b1354c489b29 (diff) |
Add the rt linux 4.1.3-rt3 as base
Import the rt linux 4.1.3-rt3 as OPNFV kvm base.
It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:
commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Sat Jul 25 12:13:34 2015 +0200
Prepare v4.1.3-rt3
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.
Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>
Diffstat (limited to 'kernel/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c')
-rw-r--r-- | kernel/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 917 |
1 files changed, 917 insertions, 0 deletions
diff --git a/kernel/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/kernel/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c new file mode 100644 index 000000000..17d4bb15b --- /dev/null +++ b/kernel/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c @@ -0,0 +1,917 @@ +/* +* Copyright (C) 2012 Invensense, Inc. +* +* This software is licensed under the terms of the GNU General Public +* License version 2, as published by the Free Software Foundation, and +* may be copied, distributed, and modified under those terms. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +*/ + +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/err.h> +#include <linux/delay.h> +#include <linux/sysfs.h> +#include <linux/jiffies.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/kfifo.h> +#include <linux/spinlock.h> +#include <linux/iio/iio.h> +#include <linux/i2c-mux.h> +#include <linux/acpi.h> +#include "inv_mpu_iio.h" + +/* + * this is the gyro scale translated from dynamic range plus/minus + * {250, 500, 1000, 2000} to rad/s + */ +static const int gyro_scale_6050[] = {133090, 266181, 532362, 1064724}; + +/* + * this is the accel scale translated from dynamic range plus/minus + * {2, 4, 8, 16} to m/s^2 + */ +static const int accel_scale[] = {598, 1196, 2392, 4785}; + +static const struct inv_mpu6050_reg_map reg_set_6050 = { + .sample_rate_div = INV_MPU6050_REG_SAMPLE_RATE_DIV, + .lpf = INV_MPU6050_REG_CONFIG, + .user_ctrl = INV_MPU6050_REG_USER_CTRL, + .fifo_en = INV_MPU6050_REG_FIFO_EN, + .gyro_config = INV_MPU6050_REG_GYRO_CONFIG, + .accl_config = INV_MPU6050_REG_ACCEL_CONFIG, + .fifo_count_h = INV_MPU6050_REG_FIFO_COUNT_H, + .fifo_r_w = INV_MPU6050_REG_FIFO_R_W, + .raw_gyro = INV_MPU6050_REG_RAW_GYRO, + .raw_accl = INV_MPU6050_REG_RAW_ACCEL, + .temperature = INV_MPU6050_REG_TEMPERATURE, + .int_enable = INV_MPU6050_REG_INT_ENABLE, + .pwr_mgmt_1 = INV_MPU6050_REG_PWR_MGMT_1, + .pwr_mgmt_2 = INV_MPU6050_REG_PWR_MGMT_2, + .int_pin_cfg = INV_MPU6050_REG_INT_PIN_CFG, +}; + +static const struct inv_mpu6050_chip_config chip_config_6050 = { + .fsr = INV_MPU6050_FSR_2000DPS, + .lpf = INV_MPU6050_FILTER_20HZ, + .fifo_rate = INV_MPU6050_INIT_FIFO_RATE, + .gyro_fifo_enable = false, + .accl_fifo_enable = false, + .accl_fs = INV_MPU6050_FS_02G, +}; + +static const struct inv_mpu6050_hw hw_info[INV_NUM_PARTS] = { + { + .num_reg = 117, + .name = "MPU6050", + .reg = ®_set_6050, + .config = &chip_config_6050, + }, +}; + +int inv_mpu6050_write_reg(struct inv_mpu6050_state *st, int reg, u8 d) +{ + return i2c_smbus_write_i2c_block_data(st->client, reg, 1, &d); +} + +/* + * The i2c read/write needs to happen in unlocked mode. As the parent + * adapter is common. If we use locked versions, it will fail as + * the mux adapter will lock the parent i2c adapter, while calling + * select/deselect functions. + */ +static int inv_mpu6050_write_reg_unlocked(struct inv_mpu6050_state *st, + u8 reg, u8 d) +{ + int ret; + u8 buf[2]; + struct i2c_msg msg[1] = { + { + .addr = st->client->addr, + .flags = 0, + .len = sizeof(buf), + .buf = buf, + } + }; + + buf[0] = reg; + buf[1] = d; + ret = __i2c_transfer(st->client->adapter, msg, 1); + if (ret != 1) + return ret; + + return 0; +} + +static int inv_mpu6050_select_bypass(struct i2c_adapter *adap, void *mux_priv, + u32 chan_id) +{ + struct iio_dev *indio_dev = mux_priv; + struct inv_mpu6050_state *st = iio_priv(indio_dev); + int ret = 0; + + /* Use the same mutex which was used everywhere to protect power-op */ + mutex_lock(&indio_dev->mlock); + if (!st->powerup_count) { + ret = inv_mpu6050_write_reg_unlocked(st, st->reg->pwr_mgmt_1, + 0); + if (ret) + goto write_error; + + msleep(INV_MPU6050_REG_UP_TIME); + } + if (!ret) { + st->powerup_count++; + ret = inv_mpu6050_write_reg_unlocked(st, st->reg->int_pin_cfg, + st->client->irq | + INV_MPU6050_BIT_BYPASS_EN); + } +write_error: + mutex_unlock(&indio_dev->mlock); + + return ret; +} + +static int inv_mpu6050_deselect_bypass(struct i2c_adapter *adap, + void *mux_priv, u32 chan_id) +{ + struct iio_dev *indio_dev = mux_priv; + struct inv_mpu6050_state *st = iio_priv(indio_dev); + + mutex_lock(&indio_dev->mlock); + /* It doesn't really mattter, if any of the calls fails */ + inv_mpu6050_write_reg_unlocked(st, st->reg->int_pin_cfg, + st->client->irq); + st->powerup_count--; + if (!st->powerup_count) + inv_mpu6050_write_reg_unlocked(st, st->reg->pwr_mgmt_1, + INV_MPU6050_BIT_SLEEP); + mutex_unlock(&indio_dev->mlock); + + return 0; +} + +int inv_mpu6050_switch_engine(struct inv_mpu6050_state *st, bool en, u32 mask) +{ + u8 d, mgmt_1; + int result; + + /* switch clock needs to be careful. Only when gyro is on, can + clock source be switched to gyro. Otherwise, it must be set to + internal clock */ + if (INV_MPU6050_BIT_PWR_GYRO_STBY == mask) { + result = i2c_smbus_read_i2c_block_data(st->client, + st->reg->pwr_mgmt_1, 1, &mgmt_1); + if (result != 1) + return result; + + mgmt_1 &= ~INV_MPU6050_BIT_CLK_MASK; + } + + if ((INV_MPU6050_BIT_PWR_GYRO_STBY == mask) && (!en)) { + /* turning off gyro requires switch to internal clock first. + Then turn off gyro engine */ + mgmt_1 |= INV_CLK_INTERNAL; + result = inv_mpu6050_write_reg(st, st->reg->pwr_mgmt_1, mgmt_1); + if (result) + return result; + } + + result = i2c_smbus_read_i2c_block_data(st->client, + st->reg->pwr_mgmt_2, 1, &d); + if (result != 1) + return result; + if (en) + d &= ~mask; + else + d |= mask; + result = inv_mpu6050_write_reg(st, st->reg->pwr_mgmt_2, d); + if (result) + return result; + + if (en) { + /* Wait for output stabilize */ + msleep(INV_MPU6050_TEMP_UP_TIME); + if (INV_MPU6050_BIT_PWR_GYRO_STBY == mask) { + /* switch internal clock to PLL */ + mgmt_1 |= INV_CLK_PLL; + result = inv_mpu6050_write_reg(st, + st->reg->pwr_mgmt_1, mgmt_1); + if (result) + return result; + } + } + + return 0; +} + +int inv_mpu6050_set_power_itg(struct inv_mpu6050_state *st, bool power_on) +{ + int result = 0; + + if (power_on) { + /* Already under indio-dev->mlock mutex */ + if (!st->powerup_count) + result = inv_mpu6050_write_reg(st, st->reg->pwr_mgmt_1, + 0); + if (!result) + st->powerup_count++; + } else { + st->powerup_count--; + if (!st->powerup_count) + result = inv_mpu6050_write_reg(st, st->reg->pwr_mgmt_1, + INV_MPU6050_BIT_SLEEP); + } + + if (result) + return result; + + if (power_on) + msleep(INV_MPU6050_REG_UP_TIME); + + return 0; +} + +/** + * inv_mpu6050_init_config() - Initialize hardware, disable FIFO. + * + * Initial configuration: + * FSR: ± 2000DPS + * DLPF: 20Hz + * FIFO rate: 50Hz + * Clock source: Gyro PLL + */ +static int inv_mpu6050_init_config(struct iio_dev *indio_dev) +{ + int result; + u8 d; + struct inv_mpu6050_state *st = iio_priv(indio_dev); + + result = inv_mpu6050_set_power_itg(st, true); + if (result) + return result; + d = (INV_MPU6050_FSR_2000DPS << INV_MPU6050_GYRO_CONFIG_FSR_SHIFT); + result = inv_mpu6050_write_reg(st, st->reg->gyro_config, d); + if (result) + return result; + + d = INV_MPU6050_FILTER_20HZ; + result = inv_mpu6050_write_reg(st, st->reg->lpf, d); + if (result) + return result; + + d = INV_MPU6050_ONE_K_HZ / INV_MPU6050_INIT_FIFO_RATE - 1; + result = inv_mpu6050_write_reg(st, st->reg->sample_rate_div, d); + if (result) + return result; + + d = (INV_MPU6050_FS_02G << INV_MPU6050_ACCL_CONFIG_FSR_SHIFT); + result = inv_mpu6050_write_reg(st, st->reg->accl_config, d); + if (result) + return result; + + memcpy(&st->chip_config, hw_info[st->chip_type].config, + sizeof(struct inv_mpu6050_chip_config)); + result = inv_mpu6050_set_power_itg(st, false); + + return result; +} + +static int inv_mpu6050_sensor_show(struct inv_mpu6050_state *st, int reg, + int axis, int *val) +{ + int ind, result; + __be16 d; + + ind = (axis - IIO_MOD_X) * 2; + result = i2c_smbus_read_i2c_block_data(st->client, reg + ind, 2, + (u8 *)&d); + if (result != 2) + return -EINVAL; + *val = (short)be16_to_cpup(&d); + + return IIO_VAL_INT; +} + +static int inv_mpu6050_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, + int *val2, + long mask) { + struct inv_mpu6050_state *st = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_RAW: + { + int ret, result; + + ret = IIO_VAL_INT; + result = 0; + mutex_lock(&indio_dev->mlock); + if (!st->chip_config.enable) { + result = inv_mpu6050_set_power_itg(st, true); + if (result) + goto error_read_raw; + } + /* when enable is on, power is already on */ + switch (chan->type) { + case IIO_ANGL_VEL: + if (!st->chip_config.gyro_fifo_enable || + !st->chip_config.enable) { + result = inv_mpu6050_switch_engine(st, true, + INV_MPU6050_BIT_PWR_GYRO_STBY); + if (result) + goto error_read_raw; + } + ret = inv_mpu6050_sensor_show(st, st->reg->raw_gyro, + chan->channel2, val); + if (!st->chip_config.gyro_fifo_enable || + !st->chip_config.enable) { + result = inv_mpu6050_switch_engine(st, false, + INV_MPU6050_BIT_PWR_GYRO_STBY); + if (result) + goto error_read_raw; + } + break; + case IIO_ACCEL: + if (!st->chip_config.accl_fifo_enable || + !st->chip_config.enable) { + result = inv_mpu6050_switch_engine(st, true, + INV_MPU6050_BIT_PWR_ACCL_STBY); + if (result) + goto error_read_raw; + } + ret = inv_mpu6050_sensor_show(st, st->reg->raw_accl, + chan->channel2, val); + if (!st->chip_config.accl_fifo_enable || + !st->chip_config.enable) { + result = inv_mpu6050_switch_engine(st, false, + INV_MPU6050_BIT_PWR_ACCL_STBY); + if (result) + goto error_read_raw; + } + break; + case IIO_TEMP: + /* wait for stablization */ + msleep(INV_MPU6050_SENSOR_UP_TIME); + inv_mpu6050_sensor_show(st, st->reg->temperature, + IIO_MOD_X, val); + break; + default: + ret = -EINVAL; + break; + } +error_read_raw: + if (!st->chip_config.enable) + result |= inv_mpu6050_set_power_itg(st, false); + mutex_unlock(&indio_dev->mlock); + if (result) + return result; + + return ret; + } + case IIO_CHAN_INFO_SCALE: + switch (chan->type) { + case IIO_ANGL_VEL: + *val = 0; + *val2 = gyro_scale_6050[st->chip_config.fsr]; + + return IIO_VAL_INT_PLUS_NANO; + case IIO_ACCEL: + *val = 0; + *val2 = accel_scale[st->chip_config.accl_fs]; + + return IIO_VAL_INT_PLUS_MICRO; + case IIO_TEMP: + *val = 0; + *val2 = INV_MPU6050_TEMP_SCALE; + + return IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; + } + case IIO_CHAN_INFO_OFFSET: + switch (chan->type) { + case IIO_TEMP: + *val = INV_MPU6050_TEMP_OFFSET; + + return IIO_VAL_INT; + default: + return -EINVAL; + } + default: + return -EINVAL; + } +} + +static int inv_mpu6050_write_gyro_scale(struct inv_mpu6050_state *st, int val) +{ + int result, i; + u8 d; + + for (i = 0; i < ARRAY_SIZE(gyro_scale_6050); ++i) { + if (gyro_scale_6050[i] == val) { + d = (i << INV_MPU6050_GYRO_CONFIG_FSR_SHIFT); + result = inv_mpu6050_write_reg(st, + st->reg->gyro_config, d); + if (result) + return result; + + st->chip_config.fsr = i; + return 0; + } + } + + return -EINVAL; +} + +static int inv_mpu6050_write_accel_scale(struct inv_mpu6050_state *st, int val) +{ + int result, i; + u8 d; + + for (i = 0; i < ARRAY_SIZE(accel_scale); ++i) { + if (accel_scale[i] == val) { + d = (i << INV_MPU6050_ACCL_CONFIG_FSR_SHIFT); + result = inv_mpu6050_write_reg(st, + st->reg->accl_config, d); + if (result) + return result; + + st->chip_config.accl_fs = i; + return 0; + } + } + + return -EINVAL; +} + +static int inv_mpu6050_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, + int val2, + long mask) { + struct inv_mpu6050_state *st = iio_priv(indio_dev); + int result; + + mutex_lock(&indio_dev->mlock); + /* we should only update scale when the chip is disabled, i.e., + not running */ + if (st->chip_config.enable) { + result = -EBUSY; + goto error_write_raw; + } + result = inv_mpu6050_set_power_itg(st, true); + if (result) + goto error_write_raw; + + switch (mask) { + case IIO_CHAN_INFO_SCALE: + switch (chan->type) { + case IIO_ANGL_VEL: + result = inv_mpu6050_write_gyro_scale(st, val2); + break; + case IIO_ACCEL: + result = inv_mpu6050_write_accel_scale(st, val2); + break; + default: + result = -EINVAL; + break; + } + break; + default: + result = -EINVAL; + break; + } + +error_write_raw: + result |= inv_mpu6050_set_power_itg(st, false); + mutex_unlock(&indio_dev->mlock); + + return result; +} + +/** + * inv_mpu6050_set_lpf() - set low pass filer based on fifo rate. + * + * Based on the Nyquist principle, the sampling rate must + * exceed twice of the bandwidth of the signal, or there + * would be alising. This function basically search for the + * correct low pass parameters based on the fifo rate, e.g, + * sampling frequency. + */ +static int inv_mpu6050_set_lpf(struct inv_mpu6050_state *st, int rate) +{ + const int hz[] = {188, 98, 42, 20, 10, 5}; + const int d[] = {INV_MPU6050_FILTER_188HZ, INV_MPU6050_FILTER_98HZ, + INV_MPU6050_FILTER_42HZ, INV_MPU6050_FILTER_20HZ, + INV_MPU6050_FILTER_10HZ, INV_MPU6050_FILTER_5HZ}; + int i, h, result; + u8 data; + + h = (rate >> 1); + i = 0; + while ((h < hz[i]) && (i < ARRAY_SIZE(d) - 1)) + i++; + data = d[i]; + result = inv_mpu6050_write_reg(st, st->reg->lpf, data); + if (result) + return result; + st->chip_config.lpf = data; + + return 0; +} + +/** + * inv_mpu6050_fifo_rate_store() - Set fifo rate. + */ +static ssize_t inv_mpu6050_fifo_rate_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + s32 fifo_rate; + u8 d; + int result; + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct inv_mpu6050_state *st = iio_priv(indio_dev); + + if (kstrtoint(buf, 10, &fifo_rate)) + return -EINVAL; + if (fifo_rate < INV_MPU6050_MIN_FIFO_RATE || + fifo_rate > INV_MPU6050_MAX_FIFO_RATE) + return -EINVAL; + if (fifo_rate == st->chip_config.fifo_rate) + return count; + + mutex_lock(&indio_dev->mlock); + if (st->chip_config.enable) { + result = -EBUSY; + goto fifo_rate_fail; + } + result = inv_mpu6050_set_power_itg(st, true); + if (result) + goto fifo_rate_fail; + + d = INV_MPU6050_ONE_K_HZ / fifo_rate - 1; + result = inv_mpu6050_write_reg(st, st->reg->sample_rate_div, d); + if (result) + goto fifo_rate_fail; + st->chip_config.fifo_rate = fifo_rate; + + result = inv_mpu6050_set_lpf(st, fifo_rate); + if (result) + goto fifo_rate_fail; + +fifo_rate_fail: + result |= inv_mpu6050_set_power_itg(st, false); + mutex_unlock(&indio_dev->mlock); + if (result) + return result; + + return count; +} + +/** + * inv_fifo_rate_show() - Get the current sampling rate. + */ +static ssize_t inv_fifo_rate_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct inv_mpu6050_state *st = iio_priv(dev_to_iio_dev(dev)); + + return sprintf(buf, "%d\n", st->chip_config.fifo_rate); +} + +/** + * inv_attr_show() - calling this function will show current + * parameters. + */ +static ssize_t inv_attr_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct inv_mpu6050_state *st = iio_priv(dev_to_iio_dev(dev)); + struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); + s8 *m; + + switch (this_attr->address) { + /* In MPU6050, the two matrix are the same because gyro and accel + are integrated in one chip */ + case ATTR_GYRO_MATRIX: + case ATTR_ACCL_MATRIX: + m = st->plat_data.orientation; + + return sprintf(buf, "%d, %d, %d; %d, %d, %d; %d, %d, %d\n", + m[0], m[1], m[2], m[3], m[4], m[5], m[6], m[7], m[8]); + default: + return -EINVAL; + } +} + +/** + * inv_mpu6050_validate_trigger() - validate_trigger callback for invensense + * MPU6050 device. + * @indio_dev: The IIO device + * @trig: The new trigger + * + * Returns: 0 if the 'trig' matches the trigger registered by the MPU6050 + * device, -EINVAL otherwise. + */ +static int inv_mpu6050_validate_trigger(struct iio_dev *indio_dev, + struct iio_trigger *trig) +{ + struct inv_mpu6050_state *st = iio_priv(indio_dev); + + if (st->trig != trig) + return -EINVAL; + + return 0; +} + +#define INV_MPU6050_CHAN(_type, _channel2, _index) \ + { \ + .type = _type, \ + .modified = 1, \ + .channel2 = _channel2, \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .scan_index = _index, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 16, \ + .storagebits = 16, \ + .shift = 0 , \ + .endianness = IIO_BE, \ + }, \ + } + +static const struct iio_chan_spec inv_mpu_channels[] = { + IIO_CHAN_SOFT_TIMESTAMP(INV_MPU6050_SCAN_TIMESTAMP), + /* + * Note that temperature should only be via polled reading only, + * not the final scan elements output. + */ + { + .type = IIO_TEMP, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) + | BIT(IIO_CHAN_INFO_OFFSET) + | BIT(IIO_CHAN_INFO_SCALE), + .scan_index = -1, + }, + INV_MPU6050_CHAN(IIO_ANGL_VEL, IIO_MOD_X, INV_MPU6050_SCAN_GYRO_X), + INV_MPU6050_CHAN(IIO_ANGL_VEL, IIO_MOD_Y, INV_MPU6050_SCAN_GYRO_Y), + INV_MPU6050_CHAN(IIO_ANGL_VEL, IIO_MOD_Z, INV_MPU6050_SCAN_GYRO_Z), + + INV_MPU6050_CHAN(IIO_ACCEL, IIO_MOD_X, INV_MPU6050_SCAN_ACCL_X), + INV_MPU6050_CHAN(IIO_ACCEL, IIO_MOD_Y, INV_MPU6050_SCAN_ACCL_Y), + INV_MPU6050_CHAN(IIO_ACCEL, IIO_MOD_Z, INV_MPU6050_SCAN_ACCL_Z), +}; + +/* constant IIO attribute */ +static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("10 20 50 100 200 500"); +static IIO_DEV_ATTR_SAMP_FREQ(S_IRUGO | S_IWUSR, inv_fifo_rate_show, + inv_mpu6050_fifo_rate_store); +static IIO_DEVICE_ATTR(in_gyro_matrix, S_IRUGO, inv_attr_show, NULL, + ATTR_GYRO_MATRIX); +static IIO_DEVICE_ATTR(in_accel_matrix, S_IRUGO, inv_attr_show, NULL, + ATTR_ACCL_MATRIX); + +static struct attribute *inv_attributes[] = { + &iio_dev_attr_in_gyro_matrix.dev_attr.attr, + &iio_dev_attr_in_accel_matrix.dev_attr.attr, + &iio_dev_attr_sampling_frequency.dev_attr.attr, + &iio_const_attr_sampling_frequency_available.dev_attr.attr, + NULL, +}; + +static const struct attribute_group inv_attribute_group = { + .attrs = inv_attributes +}; + +static const struct iio_info mpu_info = { + .driver_module = THIS_MODULE, + .read_raw = &inv_mpu6050_read_raw, + .write_raw = &inv_mpu6050_write_raw, + .attrs = &inv_attribute_group, + .validate_trigger = inv_mpu6050_validate_trigger, +}; + +/** + * inv_check_and_setup_chip() - check and setup chip. + */ +static int inv_check_and_setup_chip(struct inv_mpu6050_state *st, + const struct i2c_device_id *id) +{ + int result; + + st->chip_type = INV_MPU6050; + st->hw = &hw_info[st->chip_type]; + st->reg = hw_info[st->chip_type].reg; + + /* reset to make sure previous state are not there */ + result = inv_mpu6050_write_reg(st, st->reg->pwr_mgmt_1, + INV_MPU6050_BIT_H_RESET); + if (result) + return result; + msleep(INV_MPU6050_POWER_UP_TIME); + /* toggle power state. After reset, the sleep bit could be on + or off depending on the OTP settings. Toggling power would + make it in a definite state as well as making the hardware + state align with the software state */ + result = inv_mpu6050_set_power_itg(st, false); + if (result) + return result; + result = inv_mpu6050_set_power_itg(st, true); + if (result) + return result; + + result = inv_mpu6050_switch_engine(st, false, + INV_MPU6050_BIT_PWR_ACCL_STBY); + if (result) + return result; + result = inv_mpu6050_switch_engine(st, false, + INV_MPU6050_BIT_PWR_GYRO_STBY); + if (result) + return result; + + return 0; +} + +/** + * inv_mpu_probe() - probe function. + * @client: i2c client. + * @id: i2c device id. + * + * Returns 0 on success, a negative error code otherwise. + */ +static int inv_mpu_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct inv_mpu6050_state *st; + struct iio_dev *indio_dev; + struct inv_mpu6050_platform_data *pdata; + int result; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_I2C_BLOCK)) + return -ENOSYS; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*st)); + if (!indio_dev) + return -ENOMEM; + + st = iio_priv(indio_dev); + st->client = client; + st->powerup_count = 0; + pdata = dev_get_platdata(&client->dev); + if (pdata) + st->plat_data = *pdata; + /* power is turned on inside check chip type*/ + result = inv_check_and_setup_chip(st, id); + if (result) + return result; + + result = inv_mpu6050_init_config(indio_dev); + if (result) { + dev_err(&client->dev, + "Could not initialize device.\n"); + return result; + } + + i2c_set_clientdata(client, indio_dev); + indio_dev->dev.parent = &client->dev; + /* id will be NULL when enumerated via ACPI */ + if (id) + indio_dev->name = (char *)id->name; + else + indio_dev->name = (char *)dev_name(&client->dev); + indio_dev->channels = inv_mpu_channels; + indio_dev->num_channels = ARRAY_SIZE(inv_mpu_channels); + + indio_dev->info = &mpu_info; + indio_dev->modes = INDIO_BUFFER_TRIGGERED; + + result = iio_triggered_buffer_setup(indio_dev, + inv_mpu6050_irq_handler, + inv_mpu6050_read_fifo, + NULL); + if (result) { + dev_err(&st->client->dev, "configure buffer fail %d\n", + result); + return result; + } + result = inv_mpu6050_probe_trigger(indio_dev); + if (result) { + dev_err(&st->client->dev, "trigger probe fail %d\n", result); + goto out_unreg_ring; + } + + INIT_KFIFO(st->timestamps); + spin_lock_init(&st->time_stamp_lock); + result = iio_device_register(indio_dev); + if (result) { + dev_err(&st->client->dev, "IIO register fail %d\n", result); + goto out_remove_trigger; + } + + st->mux_adapter = i2c_add_mux_adapter(client->adapter, + &client->dev, + indio_dev, + 0, 0, 0, + inv_mpu6050_select_bypass, + inv_mpu6050_deselect_bypass); + if (!st->mux_adapter) { + result = -ENODEV; + goto out_unreg_device; + } + + result = inv_mpu_acpi_create_mux_client(st); + if (result) + goto out_del_mux; + + return 0; + +out_del_mux: + i2c_del_mux_adapter(st->mux_adapter); +out_unreg_device: + iio_device_unregister(indio_dev); +out_remove_trigger: + inv_mpu6050_remove_trigger(st); +out_unreg_ring: + iio_triggered_buffer_cleanup(indio_dev); + return result; +} + +static int inv_mpu_remove(struct i2c_client *client) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct inv_mpu6050_state *st = iio_priv(indio_dev); + + inv_mpu_acpi_delete_mux_client(st); + i2c_del_mux_adapter(st->mux_adapter); + iio_device_unregister(indio_dev); + inv_mpu6050_remove_trigger(st); + iio_triggered_buffer_cleanup(indio_dev); + + return 0; +} +#ifdef CONFIG_PM_SLEEP + +static int inv_mpu_resume(struct device *dev) +{ + return inv_mpu6050_set_power_itg( + iio_priv(i2c_get_clientdata(to_i2c_client(dev))), true); +} + +static int inv_mpu_suspend(struct device *dev) +{ + return inv_mpu6050_set_power_itg( + iio_priv(i2c_get_clientdata(to_i2c_client(dev))), false); +} +static SIMPLE_DEV_PM_OPS(inv_mpu_pmops, inv_mpu_suspend, inv_mpu_resume); + +#define INV_MPU6050_PMOPS (&inv_mpu_pmops) +#else +#define INV_MPU6050_PMOPS NULL +#endif /* CONFIG_PM_SLEEP */ + +/* + * device id table is used to identify what device can be + * supported by this driver + */ +static const struct i2c_device_id inv_mpu_id[] = { + {"mpu6050", INV_MPU6050}, + {"mpu6500", INV_MPU6500}, + {} +}; + +MODULE_DEVICE_TABLE(i2c, inv_mpu_id); + +static const struct acpi_device_id inv_acpi_match[] = { + {"INVN6500", 0}, + { }, +}; + +MODULE_DEVICE_TABLE(acpi, inv_acpi_match); + +static struct i2c_driver inv_mpu_driver = { + .probe = inv_mpu_probe, + .remove = inv_mpu_remove, + .id_table = inv_mpu_id, + .driver = { + .owner = THIS_MODULE, + .name = "inv-mpu6050", + .pm = INV_MPU6050_PMOPS, + .acpi_match_table = ACPI_PTR(inv_acpi_match), + }, +}; + +module_i2c_driver(inv_mpu_driver); + +MODULE_AUTHOR("Invensense Corporation"); +MODULE_DESCRIPTION("Invensense device MPU6050 driver"); +MODULE_LICENSE("GPL"); |