Upgrade to 4.4.50-rt62

The current kernel is based on rt kernel v4.4.6-rt14. We will upgrade it
to 4.4.50-rt62.
The command to achieve it is:
a) Clone a git repo from
git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-stable-rt.git

b) Get the diff between this two changesets:
git diff 640eca2901f3435e616157b11379d3223a44b391
705619beeea1b0b48219a683fd1a901a86fdaf5e

where the two commits are:
[yjiang5@jnakajim-build linux-stable-rt]$ git show --oneline --name-only
640eca2901f3435e616157b11379d3223a44b391
640eca2901f3 v4.4.6-rt14
localversion-rt
[yjiang5@jnakajim-build linux-stable-rt]$ git show --oneline --name-only
705619beeea1b0b48219a683fd1a901a86fdaf5e
705619beeea1 Linux 4.4.50-rt62
localversion-rt

c) One patch has been backported thus revert the patch before applying.

 filterdiff -p1 -x scripts/package/Makefile
~/tmp/v4.4.6-rt14-4.4.50-rt62.diff  |patch -p1 --dry-run

Upstream status: backport

Change-Id: I244d57a32f6066e5a5b9915f9fbf99e7bbca6e01
Signed-off-by: Yunhong Jiang <yunhong.jiang@linux.intel.com>

6 files changed, 51 insertions, 8 deletions

diff --git a/kernel/drivers/iio/adc/Kconfig b/kernel/drivers/iio/adc/Kconfig
index 1e7aded53..bda6bbe44 100644
--- a/kernel/drivers/iio/adc/Kconfig
+++ b/kernel/drivers/iio/adc/Kconfig
@@ -306,6 +306,7 @@ config QCOM_SPMI_VADC
 config ROCKCHIP_SARADC
 	tristate "Rockchip SARADC driver"
 	depends on ARCH_ROCKCHIP || (ARM && COMPILE_TEST)
+	depends on RESET_CONTROLLER
 	help
 	  Say yes here to build support for the SARADC found in SoCs from
 	  Rockchip.
diff --git a/kernel/drivers/iio/adc/ad7266.c b/kernel/drivers/iio/adc/ad7266.c
index 21e19b60e..2123f0ac2 100644
--- a/kernel/drivers/iio/adc/ad7266.c
+++ b/kernel/drivers/iio/adc/ad7266.c
@@ -396,8 +396,8 @@ static int ad7266_probe(struct spi_device *spi)
 
 	st = iio_priv(indio_dev);
 
-	st->reg = devm_regulator_get(&spi->dev, "vref");
-	if (!IS_ERR_OR_NULL(st->reg)) {
+	st->reg = devm_regulator_get_optional(&spi->dev, "vref");
+	if (!IS_ERR(st->reg)) {
 		ret = regulator_enable(st->reg);
 		if (ret)
 			return ret;
@@ -408,6 +408,9 @@ static int ad7266_probe(struct spi_device *spi)
 
 		st->vref_mv = ret / 1000;
 	} else {
+		/* Any other error indicates that the regulator does exist */
+		if (PTR_ERR(st->reg) != -ENODEV)
+			return PTR_ERR(st->reg);
 		/* Use internal reference */
 		st->vref_mv = 2500;
 	}
diff --git a/kernel/drivers/iio/adc/ad799x.c b/kernel/drivers/iio/adc/ad799x.c
index 01d71588d..ba82de25a 100644
--- a/kernel/drivers/iio/adc/ad799x.c
+++ b/kernel/drivers/iio/adc/ad799x.c
@@ -533,6 +533,7 @@ static struct attribute_group ad799x_event_attrs_group = {
 static const struct iio_info ad7991_info = {
 	.read_raw = &ad799x_read_raw,
 	.driver_module = THIS_MODULE,
+	.update_scan_mode = ad799x_update_scan_mode,
 };
 
 static const struct iio_info ad7993_4_7_8_noirq_info = {
diff --git a/kernel/drivers/iio/adc/at91_adc.c b/kernel/drivers/iio/adc/at91_adc.c
index 7b40925dd..93986f059 100644
--- a/kernel/drivers/iio/adc/at91_adc.c
+++ b/kernel/drivers/iio/adc/at91_adc.c
@@ -381,8 +381,8 @@ static irqreturn_t at91_adc_rl_interrupt(int irq, void *private)
 		st->ts_bufferedmeasure = false;
 		input_report_key(st->ts_input, BTN_TOUCH, 0);
 		input_sync(st->ts_input);
-	} else if (status & AT91_ADC_EOC(3)) {
-		/* Conversion finished */
+	} else if (status & AT91_ADC_EOC(3) && st->ts_input) {
+		/* Conversion finished and we've a touchscreen */
 		if (st->ts_bufferedmeasure) {
 			/*
 			 * Last measurement is always discarded, since it can
diff --git a/kernel/drivers/iio/adc/rockchip_saradc.c b/kernel/drivers/iio/adc/rockchip_saradc.c
index 9c311c1e1..dffff64b5 100644
--- a/kernel/drivers/iio/adc/rockchip_saradc.c
+++ b/kernel/drivers/iio/adc/rockchip_saradc.c
@@ -21,6 +21,8 @@
 #include <linux/of_device.h>
 #include <linux/clk.h>
 #include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/reset.h>
 #include <linux/regulator/consumer.h>
 #include <linux/iio/iio.h>
 
@@ -53,6 +55,7 @@ struct rockchip_saradc {
 	struct clk		*clk;
 	struct completion	completion;
 	struct regulator	*vref;
+	struct reset_control	*reset;
 	const struct rockchip_saradc_data *data;
 	u16			last_val;
 };
@@ -171,6 +174,16 @@ static const struct of_device_id rockchip_saradc_match[] = {
 };
 MODULE_DEVICE_TABLE(of, rockchip_saradc_match);
 
+/**
+ * Reset SARADC Controller.
+ */
+static void rockchip_saradc_reset_controller(struct reset_control *reset)
+{
+	reset_control_assert(reset);
+	usleep_range(10, 20);
+	reset_control_deassert(reset);
+}
+
 static int rockchip_saradc_probe(struct platform_device *pdev)
 {
 	struct rockchip_saradc *info = NULL;
@@ -199,6 +212,20 @@ static int rockchip_saradc_probe(struct platform_device *pdev)
 	if (IS_ERR(info->regs))
 		return PTR_ERR(info->regs);
 
+	/*
+	 * The reset should be an optional property, as it should work
+	 * with old devicetrees as well
+	 */
+	info->reset = devm_reset_control_get(&pdev->dev, "saradc-apb");
+	if (IS_ERR(info->reset)) {
+		ret = PTR_ERR(info->reset);
+		if (ret != -ENOENT)
+			return ret;
+
+		dev_dbg(&pdev->dev, "no reset control found\n");
+		info->reset = NULL;
+	}
+
 	init_completion(&info->completion);
 
 	irq = platform_get_irq(pdev, 0);
@@ -233,6 +260,9 @@ static int rockchip_saradc_probe(struct platform_device *pdev)
 		return PTR_ERR(info->vref);
 	}
 
+	if (info->reset)
+		rockchip_saradc_reset_controller(info->reset);
+
 	/*
 	 * Use a default value for the converter clock.
 	 * This may become user-configurable in the future.
diff --git a/kernel/drivers/iio/adc/ti_am335x_adc.c b/kernel/drivers/iio/adc/ti_am335x_adc.c
index c1e05532d..0470fc843 100644
--- a/kernel/drivers/iio/adc/ti_am335x_adc.c
+++ b/kernel/drivers/iio/adc/ti_am335x_adc.c
@@ -32,6 +32,7 @@
 
 struct tiadc_device {
 	struct ti_tscadc_dev *mfd_tscadc;
+	struct mutex fifo1_lock; /* to protect fifo access */
 	int channels;
 	u8 channel_line[8];
 	u8 channel_step[8];
@@ -360,6 +361,7 @@ static int tiadc_read_raw(struct iio_dev *indio_dev,
 		int *val, int *val2, long mask)
 {
 	struct tiadc_device *adc_dev = iio_priv(indio_dev);
+	int ret = IIO_VAL_INT;
 	int i, map_val;
 	unsigned int fifo1count, read, stepid;
 	bool found = false;
@@ -373,13 +375,14 @@ static int tiadc_read_raw(struct iio_dev *indio_dev,
 	if (!step_en)
 		return -EINVAL;
 
+	mutex_lock(&adc_dev->fifo1_lock);
 	fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT);
 	while (fifo1count--)
 		tiadc_readl(adc_dev, REG_FIFO1);
 
 	am335x_tsc_se_set_once(adc_dev->mfd_tscadc, step_en);
 
-	timeout = jiffies + usecs_to_jiffies
+	timeout = jiffies + msecs_to_jiffies
 				(IDLE_TIMEOUT * adc_dev->channels);
 	/* Wait for Fifo threshold interrupt */
 	while (1) {
@@ -389,7 +392,8 @@ static int tiadc_read_raw(struct iio_dev *indio_dev,
 
 		if (time_after(jiffies, timeout)) {
 			am335x_tsc_se_adc_done(adc_dev->mfd_tscadc);
-			return -EAGAIN;
+			ret = -EAGAIN;
+			goto err_unlock;
 		}
 	}
 	map_val = adc_dev->channel_step[chan->scan_index];
@@ -415,8 +419,11 @@ static int tiadc_read_raw(struct iio_dev *indio_dev,
 	am335x_tsc_se_adc_done(adc_dev->mfd_tscadc);
 
 	if (found == false)
-		return -EBUSY;
-	return IIO_VAL_INT;
+		ret =  -EBUSY;
+
+err_unlock:
+	mutex_unlock(&adc_dev->fifo1_lock);
+	return ret;
 }
 
 static const struct iio_info tiadc_info = {
@@ -485,6 +492,7 @@ static int tiadc_probe(struct platform_device *pdev)
 
 	tiadc_step_config(indio_dev);
 	tiadc_writel(adc_dev, REG_FIFO1THR, FIFO1_THRESHOLD);
+	mutex_init(&adc_dev->fifo1_lock);
 
 	err = tiadc_channel_init(indio_dev, adc_dev->channels);
 	if (err < 0)