diff options
author | 2015-08-04 12:17:53 -0700 | |
---|---|---|
committer | 2015-08-04 15:44:42 -0700 | |
commit | 9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 (patch) | |
tree | 1c9cafbcd35f783a87880a10f85d1a060db1a563 /kernel/drivers/ide/qd65xx.c | |
parent | 98260f3884f4a202f9ca5eabed40b1354c489b29 (diff) |
Add the rt linux 4.1.3-rt3 as base
Import the rt linux 4.1.3-rt3 as OPNFV kvm base.
It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:
commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Sat Jul 25 12:13:34 2015 +0200
Prepare v4.1.3-rt3
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.
Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>
Diffstat (limited to 'kernel/drivers/ide/qd65xx.c')
-rw-r--r-- | kernel/drivers/ide/qd65xx.c | 445 |
1 files changed, 445 insertions, 0 deletions
diff --git a/kernel/drivers/ide/qd65xx.c b/kernel/drivers/ide/qd65xx.c new file mode 100644 index 000000000..a6fb6a894 --- /dev/null +++ b/kernel/drivers/ide/qd65xx.c @@ -0,0 +1,445 @@ +/* + * Copyright (C) 1996-2001 Linus Torvalds & author (see below) + */ + +/* + * Version 0.03 Cleaned auto-tune, added probe + * Version 0.04 Added second channel tuning + * Version 0.05 Enhanced tuning ; added qd6500 support + * Version 0.06 Added dos driver's list + * Version 0.07 Second channel bug fix + * + * QDI QD6500/QD6580 EIDE controller fast support + * + * To activate controller support, use "ide0=qd65xx" + */ + +/* + * Rewritten from the work of Colten Edwards <pje120@cs.usask.ca> by + * Samuel Thibault <samuel.thibault@ens-lyon.org> + */ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/timer.h> +#include <linux/mm.h> +#include <linux/ioport.h> +#include <linux/blkdev.h> +#include <linux/ide.h> +#include <linux/init.h> +#include <asm/io.h> + +#define DRV_NAME "qd65xx" + +#include "qd65xx.h" + +/* + * I/O ports are 0x30-0x31 (and 0x32-0x33 for qd6580) + * or 0xb0-0xb1 (and 0xb2-0xb3 for qd6580) + * -- qd6500 is a single IDE interface + * -- qd6580 is a dual IDE interface + * + * More research on qd6580 being done by willmore@cig.mot.com (David) + * More Information given by Petr Soucek (petr@ryston.cz) + * http://www.ryston.cz/petr/vlb + */ + +/* + * base: Timer1 + * + * + * base+0x01: Config (R/O) + * + * bit 0: ide baseport: 1 = 0x1f0 ; 0 = 0x170 (only useful for qd6500) + * bit 1: qd65xx baseport: 1 = 0xb0 ; 0 = 0x30 + * bit 2: ID3: bus speed: 1 = <=33MHz ; 0 = >33MHz + * bit 3: qd6500: 1 = disabled, 0 = enabled + * qd6580: 1 + * upper nibble: + * qd6500: 1100 + * qd6580: either 1010 or 0101 + * + * + * base+0x02: Timer2 (qd6580 only) + * + * + * base+0x03: Control (qd6580 only) + * + * bits 0-3 must always be set 1 + * bit 4 must be set 1, but is set 0 by dos driver while measuring vlb clock + * bit 0 : 1 = Only primary port enabled : channel 0 for hda, channel 1 for hdb + * 0 = Primary and Secondary ports enabled : channel 0 for hda & hdb + * channel 1 for hdc & hdd + * bit 1 : 1 = only disks on primary port + * 0 = disks & ATAPI devices on primary port + * bit 2-4 : always 0 + * bit 5 : status, but of what ? + * bit 6 : always set 1 by dos driver + * bit 7 : set 1 for non-ATAPI devices on primary port + * (maybe read-ahead and post-write buffer ?) + */ + +static int timings[4]={-1,-1,-1,-1}; /* stores current timing for each timer */ + +/* + * qd65xx_select: + * + * This routine is invoked to prepare for access to a given drive. + */ + +static void qd65xx_dev_select(ide_drive_t *drive) +{ + u8 index = (( (QD_TIMREG(drive)) & 0x80 ) >> 7) | + (QD_TIMREG(drive) & 0x02); + + if (timings[index] != QD_TIMING(drive)) + outb(timings[index] = QD_TIMING(drive), QD_TIMREG(drive)); + + outb(drive->select | ATA_DEVICE_OBS, drive->hwif->io_ports.device_addr); +} + +/* + * qd6500_compute_timing + * + * computes the timing value where + * lower nibble represents active time, in count of VLB clocks + * upper nibble represents recovery time, in count of VLB clocks + */ + +static u8 qd6500_compute_timing (ide_hwif_t *hwif, int active_time, int recovery_time) +{ + int clk = ide_vlb_clk ? ide_vlb_clk : 50; + u8 act_cyc, rec_cyc; + + if (clk <= 33) { + act_cyc = 9 - IDE_IN(active_time * clk / 1000 + 1, 2, 9); + rec_cyc = 15 - IDE_IN(recovery_time * clk / 1000 + 1, 0, 15); + } else { + act_cyc = 8 - IDE_IN(active_time * clk / 1000 + 1, 1, 8); + rec_cyc = 18 - IDE_IN(recovery_time * clk / 1000 + 1, 3, 18); + } + + return (rec_cyc << 4) | 0x08 | act_cyc; +} + +/* + * qd6580_compute_timing + * + * idem for qd6580 + */ + +static u8 qd6580_compute_timing (int active_time, int recovery_time) +{ + int clk = ide_vlb_clk ? ide_vlb_clk : 50; + u8 act_cyc, rec_cyc; + + act_cyc = 17 - IDE_IN(active_time * clk / 1000 + 1, 2, 17); + rec_cyc = 15 - IDE_IN(recovery_time * clk / 1000 + 1, 2, 15); + + return (rec_cyc << 4) | act_cyc; +} + +/* + * qd_find_disk_type + * + * tries to find timing from dos driver's table + */ + +static int qd_find_disk_type (ide_drive_t *drive, + int *active_time, int *recovery_time) +{ + struct qd65xx_timing_s *p; + char *m = (char *)&drive->id[ATA_ID_PROD]; + char model[ATA_ID_PROD_LEN]; + + if (*m == 0) + return 0; + + strncpy(model, m, ATA_ID_PROD_LEN); + ide_fixstring(model, ATA_ID_PROD_LEN, 1); /* byte-swap */ + + for (p = qd65xx_timing ; p->offset != -1 ; p++) { + if (!strncmp(p->model, model+p->offset, 4)) { + printk(KERN_DEBUG "%s: listed !\n", drive->name); + *active_time = p->active; + *recovery_time = p->recovery; + return 1; + } + } + return 0; +} + +/* + * qd_set_timing: + * + * records the timing + */ + +static void qd_set_timing (ide_drive_t *drive, u8 timing) +{ + unsigned long data = (unsigned long)ide_get_drivedata(drive); + + data &= 0xff00; + data |= timing; + ide_set_drivedata(drive, (void *)data); + + printk(KERN_DEBUG "%s: %#x\n", drive->name, timing); +} + +static void qd6500_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) +{ + u16 *id = drive->id; + int active_time = 175; + int recovery_time = 415; /* worst case values from the dos driver */ + + /* FIXME: use drive->pio_mode value */ + if (!qd_find_disk_type(drive, &active_time, &recovery_time) && + (id[ATA_ID_OLD_PIO_MODES] & 0xff) && (id[ATA_ID_FIELD_VALID] & 2) && + id[ATA_ID_EIDE_PIO] >= 240) { + printk(KERN_INFO "%s: PIO mode%d\n", drive->name, + id[ATA_ID_OLD_PIO_MODES] & 0xff); + active_time = 110; + recovery_time = drive->id[ATA_ID_EIDE_PIO] - 120; + } + + qd_set_timing(drive, qd6500_compute_timing(drive->hwif, + active_time, recovery_time)); +} + +static void qd6580_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) +{ + const u8 pio = drive->pio_mode - XFER_PIO_0; + struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio); + unsigned int cycle_time; + int active_time = 175; + int recovery_time = 415; /* worst case values from the dos driver */ + u8 base = (hwif->config_data & 0xff00) >> 8; + + if (drive->id && !qd_find_disk_type(drive, &active_time, &recovery_time)) { + cycle_time = ide_pio_cycle_time(drive, pio); + + switch (pio) { + case 0: break; + case 3: + if (cycle_time >= 110) { + active_time = 86; + recovery_time = cycle_time - 102; + } else + printk(KERN_WARNING "%s: Strange recovery time !\n",drive->name); + break; + case 4: + if (cycle_time >= 69) { + active_time = 70; + recovery_time = cycle_time - 61; + } else + printk(KERN_WARNING "%s: Strange recovery time !\n",drive->name); + break; + default: + if (cycle_time >= 180) { + active_time = 110; + recovery_time = cycle_time - 120; + } else { + active_time = t->active; + recovery_time = cycle_time - active_time; + } + } + printk(KERN_INFO "%s: PIO mode%d\n", drive->name,pio); + } + + if (!hwif->channel && drive->media != ide_disk) { + outb(0x5f, QD_CONTROL_PORT); + printk(KERN_WARNING "%s: ATAPI: disabled read-ahead FIFO " + "and post-write buffer on %s.\n", + drive->name, hwif->name); + } + + qd_set_timing(drive, qd6580_compute_timing(active_time, recovery_time)); +} + +/* + * qd_testreg + * + * tests if the given port is a register + */ + +static int __init qd_testreg(int port) +{ + unsigned long flags; + u8 savereg, readreg; + + local_irq_save(flags); + savereg = inb_p(port); + outb_p(QD_TESTVAL, port); /* safe value */ + readreg = inb_p(port); + outb(savereg, port); + local_irq_restore(flags); + + if (savereg == QD_TESTVAL) { + printk(KERN_ERR "Outch ! the probe for qd65xx isn't reliable !\n"); + printk(KERN_ERR "Please contact maintainers to tell about your hardware\n"); + printk(KERN_ERR "Assuming qd65xx is not present.\n"); + return 1; + } + + return (readreg != QD_TESTVAL); +} + +static void __init qd6500_init_dev(ide_drive_t *drive) +{ + ide_hwif_t *hwif = drive->hwif; + u8 base = (hwif->config_data & 0xff00) >> 8; + u8 config = QD_CONFIG(hwif); + + ide_set_drivedata(drive, (void *)QD6500_DEF_DATA); +} + +static void __init qd6580_init_dev(ide_drive_t *drive) +{ + ide_hwif_t *hwif = drive->hwif; + u16 t1, t2; + u8 base = (hwif->config_data & 0xff00) >> 8; + u8 config = QD_CONFIG(hwif); + + if (hwif->host_flags & IDE_HFLAG_SINGLE) { + t1 = QD6580_DEF_DATA; + t2 = QD6580_DEF_DATA2; + } else + t2 = t1 = hwif->channel ? QD6580_DEF_DATA2 : QD6580_DEF_DATA; + + ide_set_drivedata(drive, (void *)((drive->dn & 1) ? t2 : t1)); +} + +static const struct ide_tp_ops qd65xx_tp_ops = { + .exec_command = ide_exec_command, + .read_status = ide_read_status, + .read_altstatus = ide_read_altstatus, + .write_devctl = ide_write_devctl, + + .dev_select = qd65xx_dev_select, + .tf_load = ide_tf_load, + .tf_read = ide_tf_read, + + .input_data = ide_input_data, + .output_data = ide_output_data, +}; + +static const struct ide_port_ops qd6500_port_ops = { + .init_dev = qd6500_init_dev, + .set_pio_mode = qd6500_set_pio_mode, +}; + +static const struct ide_port_ops qd6580_port_ops = { + .init_dev = qd6580_init_dev, + .set_pio_mode = qd6580_set_pio_mode, +}; + +static const struct ide_port_info qd65xx_port_info __initconst = { + .name = DRV_NAME, + .tp_ops = &qd65xx_tp_ops, + .chipset = ide_qd65xx, + .host_flags = IDE_HFLAG_IO_32BIT | + IDE_HFLAG_NO_DMA, + .pio_mask = ATA_PIO4, +}; + +/* + * qd_probe: + * + * looks at the specified baseport, and if qd found, registers & initialises it + * return 1 if another qd may be probed + */ + +static int __init qd_probe(int base) +{ + int rc; + u8 config, unit, control; + struct ide_port_info d = qd65xx_port_info; + + config = inb(QD_CONFIG_PORT); + + if (! ((config & QD_CONFIG_BASEPORT) >> 1 == (base == 0xb0)) ) + return -ENODEV; + + unit = ! (config & QD_CONFIG_IDE_BASEPORT); + + if (unit) + d.host_flags |= IDE_HFLAG_QD_2ND_PORT; + + switch (config & 0xf0) { + case QD_CONFIG_QD6500: + if (qd_testreg(base)) + return -ENODEV; /* bad register */ + + if (config & QD_CONFIG_DISABLED) { + printk(KERN_WARNING "qd6500 is disabled !\n"); + return -ENODEV; + } + + printk(KERN_NOTICE "qd6500 at %#x\n", base); + printk(KERN_DEBUG "qd6500: config=%#x, ID3=%u\n", + config, QD_ID3); + + d.port_ops = &qd6500_port_ops; + d.host_flags |= IDE_HFLAG_SINGLE; + break; + case QD_CONFIG_QD6580_A: + case QD_CONFIG_QD6580_B: + if (qd_testreg(base) || qd_testreg(base + 0x02)) + return -ENODEV; /* bad registers */ + + control = inb(QD_CONTROL_PORT); + + printk(KERN_NOTICE "qd6580 at %#x\n", base); + printk(KERN_DEBUG "qd6580: config=%#x, control=%#x, ID3=%u\n", + config, control, QD_ID3); + + outb(QD_DEF_CONTR, QD_CONTROL_PORT); + + d.port_ops = &qd6580_port_ops; + if (control & QD_CONTR_SEC_DISABLED) + d.host_flags |= IDE_HFLAG_SINGLE; + + printk(KERN_INFO "qd6580: %s IDE board\n", + (control & QD_CONTR_SEC_DISABLED) ? "single" : "dual"); + break; + default: + return -ENODEV; + } + + rc = ide_legacy_device_add(&d, (base << 8) | config); + + if (d.host_flags & IDE_HFLAG_SINGLE) + return (rc == 0) ? 1 : rc; + + return rc; +} + +static bool probe_qd65xx; + +module_param_named(probe, probe_qd65xx, bool, 0); +MODULE_PARM_DESC(probe, "probe for QD65xx chipsets"); + +static int __init qd65xx_init(void) +{ + int rc1, rc2 = -ENODEV; + + if (probe_qd65xx == 0) + return -ENODEV; + + rc1 = qd_probe(0x30); + if (rc1) + rc2 = qd_probe(0xb0); + + if (rc1 < 0 && rc2 < 0) + return -ENODEV; + + return 0; +} + +module_init(qd65xx_init); + +MODULE_AUTHOR("Samuel Thibault"); +MODULE_DESCRIPTION("support of qd65xx vlb ide chipset"); +MODULE_LICENSE("GPL"); |