summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/i2c/busses/Kconfig
diff options
context:
space:
mode:
authorJosé Pekkarinen <jose.pekkarinen@nokia.com>2016-04-11 10:41:07 +0300
committerJosé Pekkarinen <jose.pekkarinen@nokia.com>2016-04-13 08:17:18 +0300
commite09b41010ba33a20a87472ee821fa407a5b8da36 (patch)
treed10dc367189862e7ca5c592f033dc3726e1df4e3 /kernel/drivers/i2c/busses/Kconfig
parentf93b97fd65072de626c074dbe099a1fff05ce060 (diff)
These changes are the raw update to linux-4.4.6-rt14. Kernel sources
are taken from kernel.org, and rt patch from the rt wiki download page. During the rebasing, the following patch collided: Force tick interrupt and get rid of softirq magic(I70131fb85). Collisions have been removed because its logic was found on the source already. Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769 Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>
Diffstat (limited to 'kernel/drivers/i2c/busses/Kconfig')
-rw-r--r--kernel/drivers/i2c/busses/Kconfig75
1 files changed, 70 insertions, 5 deletions
diff --git a/kernel/drivers/i2c/busses/Kconfig b/kernel/drivers/i2c/busses/Kconfig
index 2255af23b..7b0aa82ea 100644
--- a/kernel/drivers/i2c/busses/Kconfig
+++ b/kernel/drivers/i2c/busses/Kconfig
@@ -124,6 +124,9 @@ config I2C_I801
BayTrail (SOC)
Sunrise Point-H (PCH)
Sunrise Point-LP (PCH)
+ DNV (SOC)
+ Broxton (SOC)
+ Lewisburg (PCH)
This driver can also be built as a module. If so, the module
will be called i2c-i801.
@@ -392,6 +395,16 @@ config I2C_BCM_KONA
If you do not need KONA I2C interface, say N.
+config I2C_BRCMSTB
+ tristate "BRCM Settop I2C controller"
+ depends on ARCH_BRCMSTB || COMPILE_TEST
+ default y
+ help
+ If you say yes to this option, support will be included for the
+ I2C interface on the Broadcom Settop SoCs.
+
+ If you do not need I2C interface, say N.
+
config I2C_BLACKFIN_TWI
tristate "Blackfin TWI I2C support"
depends on BLACKFIN
@@ -412,14 +425,14 @@ config I2C_BLACKFIN_TWI_CLK_KHZ
config I2C_CADENCE
tristate "Cadence I2C Controller"
- depends on ARCH_ZYNQ
+ depends on ARCH_ZYNQ || ARM64
help
Say yes here to select Cadence I2C Host Controller. This controller is
e.g. used by Xilinx Zynq.
config I2C_CBUS_GPIO
tristate "CBUS I2C driver"
- depends on GPIOLIB
+ depends on GPIOLIB || COMPILE_TEST
help
Support for CBUS access using I2C API. Mostly relevant for Nokia
Internet Tablets (770, N800 and N810).
@@ -516,6 +529,13 @@ config I2C_EG20T
ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series.
ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH.
+config I2C_EMEV2
+ tristate "EMMA Mobile series I2C adapter"
+ depends on HAVE_CLK
+ help
+ If you say yes to this option, support will be included for the
+ I2C interface on the Renesas Electronics EM/EV family of processors.
+
config I2C_EXYNOS5
tristate "Exynos5 high-speed I2C driver"
depends on ARCH_EXYNOS && OF
@@ -525,7 +545,7 @@ config I2C_EXYNOS5
config I2C_GPIO
tristate "GPIO-based bitbanging I2C"
- depends on GPIOLIB
+ depends on GPIOLIB || COMPILE_TEST
select I2C_ALGOBIT
help
This is a very simple bitbanging I2C driver utilizing the
@@ -565,10 +585,10 @@ config I2C_IMG
config I2C_IMX
tristate "IMX I2C interface"
- depends on ARCH_MXC
+ depends on ARCH_MXC || ARCH_LAYERSCAPE
help
Say Y here if you want to use the IIC bus controller on
- the Freescale i.MX/MXC processors.
+ the Freescale i.MX/MXC or Layerscape processors.
This driver can also be built as a module. If so, the module
will be called i2c-imx.
@@ -602,6 +622,16 @@ config I2C_KEMPLD
This driver can also be built as a module. If so, the module
will be called i2c-kempld.
+config I2C_LPC2K
+ tristate "I2C bus support for NXP LPC2K/LPC178x/18xx/43xx"
+ depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
+ help
+ This driver supports the I2C interface found several NXP
+ devices including LPC2xxx, LPC178x/7x and LPC18xx/43xx.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-lpc2k.
+
config I2C_MESON
tristate "Amlogic Meson I2C controller"
depends on ARCH_MESON
@@ -620,6 +650,16 @@ config I2C_MPC
This driver can also be built as a module. If so, the module
will be called i2c-mpc.
+config I2C_MT65XX
+ tristate "MediaTek I2C adapter"
+ depends on ARCH_MEDIATEK || COMPILE_TEST
+ depends on HAS_DMA
+ help
+ This selects the MediaTek(R) Integrated Inter Circuit bus driver
+ for MT65xx and MT81xx.
+ If you want to use MediaTek(R) I2C interface, say Y or M here.
+ If unsure, say N.
+
config I2C_MV64XXX
tristate "Marvell mv64xxx I2C Controller"
depends on MV64X60 || PLAT_ORION || ARCH_SUNXI
@@ -865,6 +905,22 @@ config I2C_TEGRA
If you say yes to this option, support will be included for the
I2C controller embedded in NVIDIA Tegra SOCs
+config I2C_UNIPHIER
+ tristate "UniPhier FIFO-less I2C controller"
+ depends on ARCH_UNIPHIER
+ help
+ If you say yes to this option, support will be included for
+ the UniPhier FIFO-less I2C interface embedded in PH1-LD4, PH1-sLD8,
+ or older UniPhier SoCs.
+
+config I2C_UNIPHIER_F
+ tristate "UniPhier FIFO-builtin I2C controller"
+ depends on ARCH_UNIPHIER
+ help
+ If you say yes to this option, support will be included for
+ the UniPhier FIFO-builtin I2C interface embedded in PH1-Pro4,
+ PH1-Pro5, or newer UniPhier SoCs.
+
config I2C_VERSATILE
tristate "ARM Versatile/Realview I2C bus support"
depends on ARCH_VERSATILE || ARCH_REALVIEW || ARCH_VEXPRESS
@@ -1110,6 +1166,15 @@ config I2C_CROS_EC_TUNNEL
connected there. This will work whatever the interface used to
talk to the EC (SPI, I2C or LPC).
+config I2C_XGENE_SLIMPRO
+ tristate "APM X-Gene SoC I2C SLIMpro devices support"
+ depends on ARCH_XGENE && MAILBOX
+ help
+ Enable I2C bus access using the APM X-Gene SoC SLIMpro
+ co-processor. The I2C device access the I2C bus via the X-Gene
+ to SLIMpro (On chip coprocessor) mailbox mechanism.
+ If unsure, say N.
+
config SCx200_ACB
tristate "Geode ACCESS.bus support"
depends on X86_32 && PCI