These changes are the raw update to linux-4.4.6-rt14. Kernel sources

are taken from kernel.org, and rt patch from the rt wiki download page. During the rebasing, the following patch collided: Force tick interrupt and get rid of softirq magic(I70131fb85). Collisions have been removed because its logic was found on the source already. Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769 Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>
author: José Pekkarinen <jose.pekkarinen@nokia.com> 2016-04-11 10:41:07 +0300
committer: José Pekkarinen <jose.pekkarinen@nokia.com> 2016-04-13 08:17:18 +0300
commit: e09b41010ba33a20a87472ee821fa407a5b8da36 (patch)
tree: d10dc367189862e7ca5c592f033dc3726e1df4e3 /kernel/drivers/hwmon
parent: f93b97fd65072de626c074dbe099a1fff05ce060 (diff)
47 files changed, 4159 insertions, 867 deletions
diff --git a/kernel/drivers/hwmon/Kconfig b/kernel/drivers/hwmon/Kconfig
index 25d9e7262..80a73bfc1 100644
--- a/kernel/drivers/hwmon/Kconfig
+++ b/kernel/drivers/hwmon/Kconfig
@@ -321,6 +321,15 @@ config SENSORS_APPLESMC
 	  Say Y here if you have an applicable laptop and want to experience
 	  the awesome power of applesmc.
 
+config SENSORS_ARM_SCPI
+	tristate "ARM SCPI Sensors"
+	depends on ARM_SCPI_PROTOCOL
+	depends on THERMAL || !THERMAL_OF
+	help
+	  This driver provides support for temperature, voltage, current
+	  and power sensors available on ARM Ltd's SCP based platforms. The
+	  actual number and type of sensors exported depend on the platform.
+
 config SENSORS_ASB100
 	tristate "Asus ASB100 Bach"
 	depends on X86 && I2C
@@ -371,6 +380,17 @@ config SENSORS_DS1621
 	  This driver can also be built as a module.  If so, the module
 	  will be called ds1621.
 
+config SENSORS_DELL_SMM
+	tristate "Dell laptop SMM BIOS hwmon driver"
+	depends on X86
+	help
+	  This hwmon driver adds support for reporting temperature of different
+	  sensors and controls the fans on Dell laptops via System Management
+	  Mode provided by Dell BIOS.
+
+	  When option I8K is also enabled this driver provides legacy /proc/i8k
+	  userspace interface for i8kutils package.
+
 config SENSORS_DA9052_ADC
 	tristate "Dialog DA9052/DA9053 ADC"
 	depends on PMIC_DA9052
@@ -509,7 +529,7 @@ config SENSORS_G762
 
 config SENSORS_GPIO_FAN
 	tristate "GPIO fan"
-	depends on GPIOLIB
+	depends on GPIOLIB || COMPILE_TEST
 	depends on THERMAL || THERMAL=n
 	help
 	  If you say yes here you get support for fans connected to GPIO lines.
@@ -598,8 +618,8 @@ config SENSORS_IT87
 	depends on !PPC
 	select HWMON_VID
 	help
-	  If you say yes here you get support for ITE IT8705F, IT8712F,
-	  IT8716F, IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8758E,
+	  If you say yes here you get support for ITE IT8705F, IT8712F, IT8716F,
+	  IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8732F, IT8758E,
 	  IT8771E, IT8772E, IT8781F, IT8782F, IT8783E/F, IT8786E, IT8790E,
 	  IT8603E, IT8620E, and IT8623E sensor chips, and the SiS950 clone.
 
@@ -829,6 +849,16 @@ config SENSORS_MAX6697
 	  This driver can also be built as a module.  If so, the module
 	  will be called max6697.
 
+config SENSORS_MAX31790
+	tristate "Maxim MAX31790 sensor chip"
+	depends on I2C
+	help
+	  If you say yes here you get support for 6-Channel PWM-Output
+	  Fan RPM Controller.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called max31790.
+
 config SENSORS_HTU21
 	tristate "Measurement Specialties HTU21D humidity/temperature sensors"
 	depends on I2C
@@ -1106,8 +1136,8 @@ config SENSORS_NTC_THERMISTOR
 	  send notifications about the temperature.
 
 	  Currently, this driver supports
-	  NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, and NCP15WL333
-	  from Murata and B57330V2103 from EPCOS.
+	  NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, NCP15WL333,
+	  and NCP03WF104 from Murata and B57330V2103 from EPCOS.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called ntc-thermistor.
@@ -1129,8 +1159,8 @@ config SENSORS_NCT6775
 	help
 	  If you say yes here you get support for the hardware monitoring
 	  functionality of the Nuvoton NCT6106D, NCT6775F, NCT6776F, NCT6779D,
-	  NCT6791D, NCT6792D and compatible Super-I/O chips. This driver
-	  replaces the w83627ehf driver for NCT6775F and NCT6776F.
+	  NCT6791D, NCT6792D, NCT6793D, and compatible Super-I/O chips. This
+	  driver replaces the w83627ehf driver for NCT6775F and NCT6776F.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called nct6775.
@@ -1186,7 +1216,8 @@ config SENSORS_PWM_FAN
 
 config SENSORS_SHT15
 	tristate "Sensiron humidity and temperature sensors. SHT15 and compat."
-	depends on GPIOLIB
+	depends on GPIOLIB || COMPILE_TEST
+	select BITREVERSE
 	help
 	  If you say yes here you get support for the Sensiron SHT10, SHT11,
 	  SHT15, SHT71, SHT75 humidity and temperature sensors.
@@ -1442,6 +1473,7 @@ config SENSORS_INA209
 config SENSORS_INA2XX
 	tristate "Texas Instruments INA219 and compatibles"
 	depends on I2C
+	select REGMAP_I2C
 	help
 	  If you say yes here you get support for INA219, INA220, INA226,
 	  INA230, and INA231 power monitor chips.
@@ -1452,6 +1484,16 @@ config SENSORS_INA2XX
 	  This driver can also be built as a module.  If so, the module
 	  will be called ina2xx.
 
+config SENSORS_TC74
+	tristate "Microchip TC74"
+	depends on I2C
+	help
+	  If you say yes here you get support for Microchip TC74 single
+	  input temperature sensor chips.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called tc74.
+
 config SENSORS_THMC50
 	tristate "Texas Instruments THMC50 / Analog Devices ADM1022"
 	depends on I2C
diff --git a/kernel/drivers/hwmon/Makefile b/kernel/drivers/hwmon/Makefile
index b4a40f17e..12a32398f 100644
--- a/kernel/drivers/hwmon/Makefile
+++ b/kernel/drivers/hwmon/Makefile
@@ -44,11 +44,13 @@ obj-$(CONFIG_SENSORS_ADT7462)	+= adt7462.o
 obj-$(CONFIG_SENSORS_ADT7470)	+= adt7470.o
 obj-$(CONFIG_SENSORS_ADT7475)	+= adt7475.o
 obj-$(CONFIG_SENSORS_APPLESMC)	+= applesmc.o
+obj-$(CONFIG_SENSORS_ARM_SCPI)	+= scpi-hwmon.o
 obj-$(CONFIG_SENSORS_ASC7621)	+= asc7621.o
 obj-$(CONFIG_SENSORS_ATXP1)	+= atxp1.o
 obj-$(CONFIG_SENSORS_CORETEMP)	+= coretemp.o
 obj-$(CONFIG_SENSORS_DA9052_ADC)+= da9052-hwmon.o
 obj-$(CONFIG_SENSORS_DA9055)+= da9055-hwmon.o
+obj-$(CONFIG_SENSORS_DELL_SMM)	+= dell-smm-hwmon.o
 obj-$(CONFIG_SENSORS_DME1737)	+= dme1737.o
 obj-$(CONFIG_SENSORS_DS620)	+= ds620.o
 obj-$(CONFIG_SENSORS_DS1621)	+= ds1621.o
@@ -114,6 +116,7 @@ obj-$(CONFIG_SENSORS_MAX6639)	+= max6639.o
 obj-$(CONFIG_SENSORS_MAX6642)	+= max6642.o
 obj-$(CONFIG_SENSORS_MAX6650)	+= max6650.o
 obj-$(CONFIG_SENSORS_MAX6697)	+= max6697.o
+obj-$(CONFIG_SENSORS_MAX31790)	+= max31790.o
 obj-$(CONFIG_SENSORS_MC13783_ADC)+= mc13783-adc.o
 obj-$(CONFIG_SENSORS_MCP3021)	+= mcp3021.o
 obj-$(CONFIG_SENSORS_MENF21BMC_HWMON) += menf21bmc_hwmon.o
@@ -140,6 +143,7 @@ obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o
 obj-$(CONFIG_SENSORS_SMSC47M1)	+= smsc47m1.o
 obj-$(CONFIG_SENSORS_SMSC47M192)+= smsc47m192.o
 obj-$(CONFIG_SENSORS_AMC6821)	+= amc6821.o
+obj-$(CONFIG_SENSORS_TC74)	+= tc74.o
 obj-$(CONFIG_SENSORS_THMC50)	+= thmc50.o
 obj-$(CONFIG_SENSORS_TMP102)	+= tmp102.o
 obj-$(CONFIG_SENSORS_TMP103)	+= tmp103.o
diff --git a/kernel/drivers/hwmon/abx500.c b/kernel/drivers/hwmon/abx500.c
index 6cb89c0eb..d87cae8c6 100644
--- a/kernel/drivers/hwmon/abx500.c
+++ b/kernel/drivers/hwmon/abx500.c
@@ -377,7 +377,7 @@ static int setup_irqs(struct platform_device *pdev)
 	}
 
 	ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
-		abx500_temp_irq_handler, IRQF_NO_SUSPEND, "abx500-temp", pdev);
+		abx500_temp_irq_handler, 0, "abx500-temp", pdev);
 	if (ret < 0)
 		dev_err(&pdev->dev, "Request threaded irq failed (%d)\n", ret);
 
@@ -470,6 +470,7 @@ static const struct of_device_id abx500_temp_match[] = {
 	{ .compatible = "stericsson,abx500-temp" },
 	{},
 };
+MODULE_DEVICE_TABLE(of, abx500_temp_match);
 #endif
 
 static struct platform_driver abx500_temp_driver = {
diff --git a/kernel/drivers/hwmon/ad7314.c b/kernel/drivers/hwmon/ad7314.c
index 11955467f..202c1fbb3 100644
--- a/kernel/drivers/hwmon/ad7314.c
+++ b/kernel/drivers/hwmon/ad7314.c
@@ -157,7 +157,6 @@ MODULE_DEVICE_TABLE(spi, ad7314_id);
 static struct spi_driver ad7314_driver = {
 	.driver = {
 		.name = "ad7314",
-		.owner = THIS_MODULE,
 	},
 	.probe = ad7314_probe,
 	.remove = ad7314_remove,
diff --git a/kernel/drivers/hwmon/adcxx.c b/kernel/drivers/hwmon/adcxx.c
index 04c08c2f7..69e0bb97e 100644
--- a/kernel/drivers/hwmon/adcxx.c
+++ b/kernel/drivers/hwmon/adcxx.c
@@ -234,7 +234,6 @@ MODULE_DEVICE_TABLE(spi, adcxx_ids);
 static struct spi_driver adcxx_driver = {
 	.driver = {
 		.name	= "adcxx",
-		.owner	= THIS_MODULE,
 	},
 	.id_table = adcxx_ids,
 	.probe	= adcxx_probe,
diff --git a/kernel/drivers/hwmon/ads1015.c b/kernel/drivers/hwmon/ads1015.c
index f155b8380..2b3105c8a 100644
--- a/kernel/drivers/hwmon/ads1015.c
+++ b/kernel/drivers/hwmon/ads1015.c
@@ -126,7 +126,7 @@ static int ads1015_reg_to_mv(struct i2c_client *client, unsigned int channel,
 	struct ads1015_data *data = i2c_get_clientdata(client);
 	unsigned int pga = data->channel_data[channel].pga;
 	int fullscale = fullscale_table[pga];
-	const unsigned mask = data->id == ads1115 ? 0x7fff : 0x7ff0;
+	const int mask = data->id == ads1115 ? 0x7fff : 0x7ff0;
 
 	return DIV_ROUND_CLOSEST(reg * fullscale, mask);
 }
diff --git a/kernel/drivers/hwmon/ads7871.c b/kernel/drivers/hwmon/ads7871.c
index 3eff73b62..4fd9e4de1 100644
--- a/kernel/drivers/hwmon/ads7871.c
+++ b/kernel/drivers/hwmon/ads7871.c
@@ -237,7 +237,6 @@ static int ads7871_remove(struct spi_device *spi)
 static struct spi_driver ads7871_driver = {
 	.driver = {
 		.name = DEVICE_NAME,
-		.owner = THIS_MODULE,
 	},
 
 	.probe = ads7871_probe,
diff --git a/kernel/drivers/hwmon/adt7310.c b/kernel/drivers/hwmon/adt7310.c
index 5994cf68e..ec02f4f0d 100644
--- a/kernel/drivers/hwmon/adt7310.c
+++ b/kernel/drivers/hwmon/adt7310.c
@@ -104,7 +104,6 @@ MODULE_DEVICE_TABLE(spi, adt7310_id);
 static struct spi_driver adt7310_driver = {
 	.driver = {
 		.name	= "adt7310",
-		.owner	= THIS_MODULE,
 		.pm	= ADT7X10_DEV_PM_OPS,
 	},
 	.probe		= adt7310_spi_probe,
diff --git a/kernel/drivers/hwmon/applesmc.c b/kernel/drivers/hwmon/applesmc.c
index 0af63da6b..0af7fd311 100644
--- a/kernel/drivers/hwmon/applesmc.c
+++ b/kernel/drivers/hwmon/applesmc.c
@@ -537,7 +537,7 @@ static int applesmc_init_index(struct applesmc_registers *s)
 static int applesmc_init_smcreg_try(void)
 {
 	struct applesmc_registers *s = &smcreg;
-	bool left_light_sensor, right_light_sensor;
+	bool left_light_sensor = 0, right_light_sensor = 0;
 	unsigned int count;
 	u8 tmp[1];
 	int ret;
@@ -1138,7 +1138,7 @@ out:
 	return ret;
 }
 
-/* Create accelerometer ressources */
+/* Create accelerometer resources */
 static int applesmc_create_accelerometer(void)
 {
 	struct input_dev *idev;
@@ -1191,7 +1191,7 @@ out:
 	return ret;
 }
 
-/* Release all ressources used by the accelerometer */
+/* Release all resources used by the accelerometer */
 static void applesmc_release_accelerometer(void)
 {
 	if (!smcreg.has_accelerometer)
diff --git a/kernel/drivers/hwmon/atxp1.c b/kernel/drivers/hwmon/atxp1.c
index 4c829bb2f..f2f2f2fc7 100644
--- a/kernel/drivers/hwmon/atxp1.c
+++ b/kernel/drivers/hwmon/atxp1.c
@@ -12,10 +12,9 @@
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
+ * The ATXP1 can reside on I2C addresses 0x37 or 0x4e. The chip is
+ * not auto-detected by the driver and must be instantiated explicitly.
+ * See Documentation/i2c/instantiating-devices for more information.
  */
 
 #include <linux/kernel.h>
@@ -43,8 +42,6 @@ MODULE_AUTHOR("Sebastian Witt <se.witt@gmx.net>");
 #define ATXP1_VIDMASK	0x1f
 #define ATXP1_GPIO1MASK	0x0f
 
-static const unsigned short normal_i2c[] = { 0x37, 0x4e, I2C_CLIENT_END };
-
 struct atxp1_data {
 	struct i2c_client *client;
 	struct mutex update_lock;
@@ -259,48 +256,6 @@ static struct attribute *atxp1_attrs[] = {
 };
 ATTRIBUTE_GROUPS(atxp1);
 
-/* Return 0 if detection is successful, -ENODEV otherwise */
-static int atxp1_detect(struct i2c_client *new_client,
-			struct i2c_board_info *info)
-{
-	struct i2c_adapter *adapter = new_client->adapter;
-
-	u8 temp;
-
-	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		return -ENODEV;
-
-	/* Detect ATXP1, checking if vendor ID registers are all zero */
-	if (!((i2c_smbus_read_byte_data(new_client, 0x3e) == 0) &&
-	     (i2c_smbus_read_byte_data(new_client, 0x3f) == 0) &&
-	     (i2c_smbus_read_byte_data(new_client, 0xfe) == 0) &&
-	     (i2c_smbus_read_byte_data(new_client, 0xff) == 0)))
-		return -ENODEV;
-
-	/*
-	 * No vendor ID, now checking if registers 0x10,0x11 (non-existent)
-	 * showing the same as register 0x00
-	 */
-	temp = i2c_smbus_read_byte_data(new_client, 0x00);
-
-	if (!((i2c_smbus_read_byte_data(new_client, 0x10) == temp) &&
-	      (i2c_smbus_read_byte_data(new_client, 0x11) == temp)))
-		return -ENODEV;
-
-	/* Get VRM */
-	temp = vid_which_vrm();
-
-	if ((temp != 90) && (temp != 91)) {
-		dev_err(&adapter->dev, "atxp1: Not supporting VRM %d.%d\n",
-				temp / 10, temp % 10);
-		return -ENODEV;
-	}
-
-	strlcpy(info->type, "atxp1", I2C_NAME_SIZE);
-
-	return 0;
-}
-
 static int atxp1_probe(struct i2c_client *client,
 		       const struct i2c_device_id *id)
 {
@@ -314,6 +269,11 @@ static int atxp1_probe(struct i2c_client *client,
 
 	/* Get VRM */
 	data->vrm = vid_which_vrm();
+	if (data->vrm != 90 && data->vrm != 91) {
+		dev_err(dev, "atxp1: Not supporting VRM %d.%d\n",
+			data->vrm / 10, data->vrm % 10);
+		return -ENODEV;
+	}
 
 	data->client = client;
 	mutex_init(&data->update_lock);
@@ -342,8 +302,6 @@ static struct i2c_driver atxp1_driver = {
 	},
 	.probe		= atxp1_probe,
 	.id_table	= atxp1_id,
-	.detect		= atxp1_detect,
-	.address_list	= normal_i2c,
 };
 
 module_i2c_driver(atxp1_driver);
diff --git a/kernel/drivers/hwmon/coretemp.c b/kernel/drivers/hwmon/coretemp.c
index ed303ba3a..6a27eb2fe 100644
--- a/kernel/drivers/hwmon/coretemp.c
+++ b/kernel/drivers/hwmon/coretemp.c
@@ -52,7 +52,7 @@ module_param_named(tjmax, force_tjmax, int, 0444);
 MODULE_PARM_DESC(tjmax, "TjMax value in degrees Celsius");
 
 #define BASE_SYSFS_ATTR_NO	2	/* Sysfs Base attr no for coretemp */
-#define NUM_REAL_CORES		32	/* Number of Real cores per cpu */
+#define NUM_REAL_CORES		128	/* Number of Real cores per cpu */
 #define CORETEMP_NAME_LENGTH	19	/* String Length of attrs */
 #define MAX_CORE_ATTRS		4	/* Maximum no of basic attrs */
 #define TOTAL_ATTRS		(MAX_CORE_ATTRS + 1)
@@ -63,7 +63,8 @@ MODULE_PARM_DESC(tjmax, "TjMax value in degrees Celsius");
 #define TO_ATTR_NO(cpu)		(TO_CORE_ID(cpu) + BASE_SYSFS_ATTR_NO)
 
 #ifdef CONFIG_SMP
-#define for_each_sibling(i, cpu)	for_each_cpu(i, cpu_sibling_mask(cpu))
+#define for_each_sibling(i, cpu) \
+	for_each_cpu(i, topology_sibling_cpumask(cpu))
 #else
 #define for_each_sibling(i, cpu)	for (i = 0; false; )
 #endif
diff --git a/kernel/drivers/hwmon/dell-smm-hwmon.c b/kernel/drivers/hwmon/dell-smm-hwmon.c
new file mode 100644
index 000000000..c43318d34
--- /dev/null
+++ b/kernel/drivers/hwmon/dell-smm-hwmon.c
@@ -0,0 +1,1054 @@
+/*
+ * dell-smm-hwmon.c -- Linux driver for accessing the SMM BIOS on Dell laptops.
+ *
+ * Copyright (C) 2001  Massimo Dal Zotto <dz@debian.org>
+ *
+ * Hwmon integration:
+ * Copyright (C) 2011  Jean Delvare <jdelvare@suse.de>
+ * Copyright (C) 2013, 2014  Guenter Roeck <linux@roeck-us.net>
+ * Copyright (C) 2014, 2015  Pali Rohár <pali.rohar@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <linux/dmi.h>
+#include <linux/capability.h>
+#include <linux/mutex.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+#include <linux/sched.h>
+
+#include <linux/i8k.h>
+
+#define I8K_SMM_FN_STATUS	0x0025
+#define I8K_SMM_POWER_STATUS	0x0069
+#define I8K_SMM_SET_FAN		0x01a3
+#define I8K_SMM_GET_FAN		0x00a3
+#define I8K_SMM_GET_SPEED	0x02a3
+#define I8K_SMM_GET_FAN_TYPE	0x03a3
+#define I8K_SMM_GET_NOM_SPEED	0x04a3
+#define I8K_SMM_GET_TEMP	0x10a3
+#define I8K_SMM_GET_TEMP_TYPE	0x11a3
+#define I8K_SMM_GET_DELL_SIG1	0xfea3
+#define I8K_SMM_GET_DELL_SIG2	0xffa3
+
+#define I8K_FAN_MULT		30
+#define I8K_FAN_MAX_RPM		30000
+#define I8K_MAX_TEMP		127
+
+#define I8K_FN_NONE		0x00
+#define I8K_FN_UP		0x01
+#define I8K_FN_DOWN		0x02
+#define I8K_FN_MUTE		0x04
+#define I8K_FN_MASK		0x07
+#define I8K_FN_SHIFT		8
+
+#define I8K_POWER_AC		0x05
+#define I8K_POWER_BATTERY	0x01
+
+static DEFINE_MUTEX(i8k_mutex);
+static char bios_version[4];
+static struct device *i8k_hwmon_dev;
+static u32 i8k_hwmon_flags;
+static uint i8k_fan_mult = I8K_FAN_MULT;
+static uint i8k_pwm_mult;
+static uint i8k_fan_max = I8K_FAN_HIGH;
+
+#define I8K_HWMON_HAVE_TEMP1	(1 << 0)
+#define I8K_HWMON_HAVE_TEMP2	(1 << 1)
+#define I8K_HWMON_HAVE_TEMP3	(1 << 2)
+#define I8K_HWMON_HAVE_TEMP4	(1 << 3)
+#define I8K_HWMON_HAVE_FAN1	(1 << 4)
+#define I8K_HWMON_HAVE_FAN2	(1 << 5)
+
+MODULE_AUTHOR("Massimo Dal Zotto (dz@debian.org)");
+MODULE_AUTHOR("Pali Rohár <pali.rohar@gmail.com>");
+MODULE_DESCRIPTION("Dell laptop SMM BIOS hwmon driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("i8k");
+
+static bool force;
+module_param(force, bool, 0);
+MODULE_PARM_DESC(force, "Force loading without checking for supported models");
+
+static bool ignore_dmi;
+module_param(ignore_dmi, bool, 0);
+MODULE_PARM_DESC(ignore_dmi, "Continue probing hardware even if DMI data does not match");
+
+#if IS_ENABLED(CONFIG_I8K)
+static bool restricted;
+module_param(restricted, bool, 0);
+MODULE_PARM_DESC(restricted, "Allow fan control if SYS_ADMIN capability set");
+
+static bool power_status;
+module_param(power_status, bool, 0600);
+MODULE_PARM_DESC(power_status, "Report power status in /proc/i8k");
+#endif
+
+static uint fan_mult;
+module_param(fan_mult, uint, 0);
+MODULE_PARM_DESC(fan_mult, "Factor to multiply fan speed with (default: autodetect)");
+
+static uint fan_max;
+module_param(fan_max, uint, 0);
+MODULE_PARM_DESC(fan_max, "Maximum configurable fan speed (default: autodetect)");
+
+struct smm_regs {
+	unsigned int eax;
+	unsigned int ebx __packed;
+	unsigned int ecx __packed;
+	unsigned int edx __packed;
+	unsigned int esi __packed;
+	unsigned int edi __packed;
+};
+
+static inline const char *i8k_get_dmi_data(int field)
+{
+	const char *dmi_data = dmi_get_system_info(field);
+
+	return dmi_data && *dmi_data ? dmi_data : "?";
+}
+
+/*
+ * Call the System Management Mode BIOS. Code provided by Jonathan Buzzard.
+ */
+static int i8k_smm(struct smm_regs *regs)
+{
+	int rc;
+	int eax = regs->eax;
+	cpumask_var_t old_mask;
+
+	/* SMM requires CPU 0 */
+	if (!alloc_cpumask_var(&old_mask, GFP_KERNEL))
+		return -ENOMEM;
+	cpumask_copy(old_mask, &current->cpus_allowed);
+	rc = set_cpus_allowed_ptr(current, cpumask_of(0));
+	if (rc)
+		goto out;
+	if (smp_processor_id() != 0) {
+		rc = -EBUSY;
+		goto out;
+	}
+
+#if defined(CONFIG_X86_64)
+	asm volatile("pushq %%rax\n\t"
+		"movl 0(%%rax),%%edx\n\t"
+		"pushq %%rdx\n\t"
+		"movl 4(%%rax),%%ebx\n\t"
+		"movl 8(%%rax),%%ecx\n\t"
+		"movl 12(%%rax),%%edx\n\t"
+		"movl 16(%%rax),%%esi\n\t"
+		"movl 20(%%rax),%%edi\n\t"
+		"popq %%rax\n\t"
+		"out %%al,$0xb2\n\t"
+		"out %%al,$0x84\n\t"
+		"xchgq %%rax,(%%rsp)\n\t"
+		"movl %%ebx,4(%%rax)\n\t"
+		"movl %%ecx,8(%%rax)\n\t"
+		"movl %%edx,12(%%rax)\n\t"
+		"movl %%esi,16(%%rax)\n\t"
+		"movl %%edi,20(%%rax)\n\t"
+		"popq %%rdx\n\t"
+		"movl %%edx,0(%%rax)\n\t"
+		"pushfq\n\t"
+		"popq %%rax\n\t"
+		"andl $1,%%eax\n"
+		: "=a"(rc)
+		:    "a"(regs)
+		:    "%ebx", "%ecx", "%edx", "%esi", "%edi", "memory");
+#else
+	asm volatile("pushl %%eax\n\t"
+	    "movl 0(%%eax),%%edx\n\t"
+	    "push %%edx\n\t"
+	    "movl 4(%%eax),%%ebx\n\t"
+	    "movl 8(%%eax),%%ecx\n\t"
+	    "movl 12(%%eax),%%edx\n\t"
+	    "movl 16(%%eax),%%esi\n\t"
+	    "movl 20(%%eax),%%edi\n\t"
+	    "popl %%eax\n\t"
+	    "out %%al,$0xb2\n\t"
+	    "out %%al,$0x84\n\t"
+	    "xchgl %%eax,(%%esp)\n\t"
+	    "movl %%ebx,4(%%eax)\n\t"
+	    "movl %%ecx,8(%%eax)\n\t"
+	    "movl %%edx,12(%%eax)\n\t"
+	    "movl %%esi,16(%%eax)\n\t"
+	    "movl %%edi,20(%%eax)\n\t"
+	    "popl %%edx\n\t"
+	    "movl %%edx,0(%%eax)\n\t"
+	    "lahf\n\t"
+	    "shrl $8,%%eax\n\t"
+	    "andl $1,%%eax\n"
+	    : "=a"(rc)
+	    :    "a"(regs)
+	    :    "%ebx", "%ecx", "%edx", "%esi", "%edi", "memory");
+#endif
+	if (rc != 0 || (regs->eax & 0xffff) == 0xffff || regs->eax == eax)
+		rc = -EINVAL;
+
+out:
+	set_cpus_allowed_ptr(current, old_mask);
+	free_cpumask_var(old_mask);
+	return rc;
+}
+
+/*
+ * Read the fan status.
+ */
+static int i8k_get_fan_status(int fan)
+{
+	struct smm_regs regs = { .eax = I8K_SMM_GET_FAN, };
+
+	regs.ebx = fan & 0xff;
+	return i8k_smm(&regs) ? : regs.eax & 0xff;
+}
+
+/*
+ * Read the fan speed in RPM.
+ */
+static int i8k_get_fan_speed(int fan)
+{
+	struct smm_regs regs = { .eax = I8K_SMM_GET_SPEED, };
+
+	regs.ebx = fan & 0xff;
+	return i8k_smm(&regs) ? : (regs.eax & 0xffff) * i8k_fan_mult;
+}
+
+/*
+ * Read the fan type.
+ */
+static int i8k_get_fan_type(int fan)
+{
+	struct smm_regs regs = { .eax = I8K_SMM_GET_FAN_TYPE, };
+
+	regs.ebx = fan & 0xff;
+	return i8k_smm(&regs) ? : regs.eax & 0xff;
+}
+
+/*
+ * Read the fan nominal rpm for specific fan speed.
+ */
+static int i8k_get_fan_nominal_speed(int fan, int speed)
+{
+	struct smm_regs regs = { .eax = I8K_SMM_GET_NOM_SPEED, };
+
+	regs.ebx = (fan & 0xff) | (speed << 8);
+	return i8k_smm(&regs) ? : (regs.eax & 0xffff) * i8k_fan_mult;
+}
+
+/*
+ * Set the fan speed (off, low, high). Returns the new fan status.
+ */
+static int i8k_set_fan(int fan, int speed)
+{
+	struct smm_regs regs = { .eax = I8K_SMM_SET_FAN, };
+
+	speed = (speed < 0) ? 0 : ((speed > i8k_fan_max) ? i8k_fan_max : speed);
+	regs.ebx = (fan & 0xff) | (speed << 8);
+
+	return i8k_smm(&regs) ? : i8k_get_fan_status(fan);
+}
+
+static int i8k_get_temp_type(int sensor)
+{
+	struct smm_regs regs = { .eax = I8K_SMM_GET_TEMP_TYPE, };
+
+	regs.ebx = sensor & 0xff;
+	return i8k_smm(&regs) ? : regs.eax & 0xff;
+}
+
+/*
+ * Read the cpu temperature.
+ */
+static int _i8k_get_temp(int sensor)
+{
+	struct smm_regs regs = {
+		.eax = I8K_SMM_GET_TEMP,
+		.ebx = sensor & 0xff,
+	};
+
+	return i8k_smm(&regs) ? : regs.eax & 0xff;
+}
+
+static int i8k_get_temp(int sensor)
+{
+	int temp = _i8k_get_temp(sensor);
+
+	/*
+	 * Sometimes the temperature sensor returns 0x99, which is out of range.
+	 * In this case we retry (once) before returning an error.
+	 # 1003655137 00000058 00005a4b
+	 # 1003655138 00000099 00003a80 <--- 0x99 = 153 degrees
+	 # 1003655139 00000054 00005c52
+	 */
+	if (temp == 0x99) {
+		msleep(100);
+		temp = _i8k_get_temp(sensor);
+	}
+	/*
+	 * Return -ENODATA for all invalid temperatures.
+	 *
+	 * Known instances are the 0x99 value as seen above as well as
+	 * 0xc1 (193), which may be returned when trying to read the GPU
+	 * temperature if the system supports a GPU and it is currently
+	 * turned off.
+	 */
+	if (temp > I8K_MAX_TEMP)
+		return -ENODATA;
+
+	return temp;
+}
+
+static int i8k_get_dell_signature(int req_fn)
+{
+	struct smm_regs regs = { .eax = req_fn, };
+	int rc;
+
+	rc = i8k_smm(&regs);
+	if (rc < 0)
+		return rc;
+
+	return regs.eax == 1145651527 && regs.edx == 1145392204 ? 0 : -1;
+}
+
+#if IS_ENABLED(CONFIG_I8K)
+
+/*
+ * Read the Fn key status.
+ */
+static int i8k_get_fn_status(void)
+{
+	struct smm_regs regs = { .eax = I8K_SMM_FN_STATUS, };
+	int rc;
+
+	rc = i8k_smm(&regs);
+	if (rc < 0)
+		return rc;
+
+	switch ((regs.eax >> I8K_FN_SHIFT) & I8K_FN_MASK) {
+	case I8K_FN_UP:
+		return I8K_VOL_UP;
+	case I8K_FN_DOWN:
+		return I8K_VOL_DOWN;
+	case I8K_FN_MUTE:
+		return I8K_VOL_MUTE;
+	default:
+		return 0;
+	}
+}
+
+/*
+ * Read the power status.
+ */
+static int i8k_get_power_status(void)
+{
+	struct smm_regs regs = { .eax = I8K_SMM_POWER_STATUS, };
+	int rc;
+
+	rc = i8k_smm(&regs);
+	if (rc < 0)
+		return rc;
+
+	return (regs.eax & 0xff) == I8K_POWER_AC ? I8K_AC : I8K_BATTERY;
+}
+
+/*
+ * Procfs interface
+ */
+
+static int
+i8k_ioctl_unlocked(struct file *fp, unsigned int cmd, unsigned long arg)
+{
+	int val = 0;
+	int speed;
+	unsigned char buff[16];
+	int __user *argp = (int __user *)arg;
+
+	if (!argp)
+		return -EINVAL;
+
+	switch (cmd) {
+	case I8K_BIOS_VERSION:
+		val = (bios_version[0] << 16) |
+				(bios_version[1] << 8) | bios_version[2];
+		break;
+
+	case I8K_MACHINE_ID:
+		memset(buff, 0, 16);
+		strlcpy(buff, i8k_get_dmi_data(DMI_PRODUCT_SERIAL),
+			sizeof(buff));
+		break;
+
+	case I8K_FN_STATUS:
+		val = i8k_get_fn_status();
+		break;
+
+	case I8K_POWER_STATUS:
+		val = i8k_get_power_status();
+		break;
+
+	case I8K_GET_TEMP:
+		val = i8k_get_temp(0);
+		break;
+
+	case I8K_GET_SPEED:
+		if (copy_from_user(&val, argp, sizeof(int)))
+			return -EFAULT;
+
+		val = i8k_get_fan_speed(val);
+		break;
+
+	case I8K_GET_FAN:
+		if (copy_from_user(&val, argp, sizeof(int)))
+			return -EFAULT;
+
+		val = i8k_get_fan_status(val);
+		break;
+
+	case I8K_SET_FAN:
+		if (restricted && !capable(CAP_SYS_ADMIN))
+			return -EPERM;
+
+		if (copy_from_user(&val, argp, sizeof(int)))
+			return -EFAULT;
+
+		if (copy_from_user(&speed, argp + 1, sizeof(int)))
+			return -EFAULT;
+
+		val = i8k_set_fan(val, speed);
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	if (val < 0)
+		return val;
+
+	switch (cmd) {
+	case I8K_BIOS_VERSION:
+		if (copy_to_user(argp, &val, 4))
+			return -EFAULT;
+
+		break;
+	case I8K_MACHINE_ID:
+		if (copy_to_user(argp, buff, 16))
+			return -EFAULT;
+
+		break;
+	default:
+		if (copy_to_user(argp, &val, sizeof(int)))
+			return -EFAULT;
+
+		break;
+	}
+
+	return 0;
+}
+
+static long i8k_ioctl(struct file *fp, unsigned int cmd, unsigned long arg)
+{
+	long ret;
+
+	mutex_lock(&i8k_mutex);
+	ret = i8k_ioctl_unlocked(fp, cmd, arg);
+	mutex_unlock(&i8k_mutex);
+
+	return ret;
+}
+
+/*
+ * Print the information for /proc/i8k.
+ */
+static int i8k_proc_show(struct seq_file *seq, void *offset)
+{
+	int fn_key, cpu_temp, ac_power;
+	int left_fan, right_fan, left_speed, right_speed;
+
+	cpu_temp	= i8k_get_temp(0);			/* 11100 µs */
+	left_fan	= i8k_get_fan_status(I8K_FAN_LEFT);	/*   580 µs */
+	right_fan	= i8k_get_fan_status(I8K_FAN_RIGHT);	/*   580 µs */
+	left_speed	= i8k_get_fan_speed(I8K_FAN_LEFT);	/*   580 µs */
+	right_speed	= i8k_get_fan_speed(I8K_FAN_RIGHT);	/*   580 µs */
+	fn_key		= i8k_get_fn_status();			/*   750 µs */
+	if (power_status)
+		ac_power = i8k_get_power_status();		/* 14700 µs */
+	else
+		ac_power = -1;
+
+	/*
+	 * Info:
+	 *
+	 * 1)  Format version (this will change if format changes)
+	 * 2)  BIOS version
+	 * 3)  BIOS machine ID
+	 * 4)  Cpu temperature
+	 * 5)  Left fan status
+	 * 6)  Right fan status
+	 * 7)  Left fan speed
+	 * 8)  Right fan speed
+	 * 9)  AC power
+	 * 10) Fn Key status
+	 */
+	seq_printf(seq, "%s %s %s %d %d %d %d %d %d %d\n",
+		   I8K_PROC_FMT,
+		   bios_version,
+		   i8k_get_dmi_data(DMI_PRODUCT_SERIAL),
+		   cpu_temp,
+		   left_fan, right_fan, left_speed, right_speed,
+		   ac_power, fn_key);
+
+	return 0;
+}
+
+static int i8k_open_fs(struct inode *inode, struct file *file)
+{
+	return single_open(file, i8k_proc_show, NULL);
+}
+
+static const struct file_operations i8k_fops = {
+	.owner		= THIS_MODULE,
+	.open		= i8k_open_fs,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+	.unlocked_ioctl	= i8k_ioctl,
+};
+
+static void __init i8k_init_procfs(void)
+{
+	/* Register the proc entry */
+	proc_create("i8k", 0, NULL, &i8k_fops);
+}
+
+static void __exit i8k_exit_procfs(void)
+{
+	remove_proc_entry("i8k", NULL);
+}
+
+#else
+
+static inline void __init i8k_init_procfs(void)
+{
+}
+
+static inline void __exit i8k_exit_procfs(void)
+{
+}
+
+#endif
+
+/*
+ * Hwmon interface
+ */
+
+static ssize_t i8k_hwmon_show_temp_label(struct device *dev,
+					 struct device_attribute *devattr,
+					 char *buf)
+{
+	static const char * const labels[] = {
+		"CPU",
+		"GPU",
+		"SODIMM",
+		"Other",
+		"Ambient",
+		"Other",
+	};
+	int index = to_sensor_dev_attr(devattr)->index;
+	int type;
+
+	type = i8k_get_temp_type(index);
+	if (type < 0)
+		return type;
+	if (type >= ARRAY_SIZE(labels))
+		type = ARRAY_SIZE(labels) - 1;
+	return sprintf(buf, "%s\n", labels[type]);
+}
+
+static ssize_t i8k_hwmon_show_temp(struct device *dev,
+				   struct device_attribute *devattr,
+				   char *buf)
+{
+	int index = to_sensor_dev_attr(devattr)->index;
+	int temp;
+
+	temp = i8k_get_temp(index);
+	if (temp < 0)
+		return temp;
+	return sprintf(buf, "%d\n", temp * 1000);
+}
+
+static ssize_t i8k_hwmon_show_fan_label(struct device *dev,
+					struct device_attribute *devattr,
+					char *buf)
+{
+	static const char * const labels[] = {
+		"Processor Fan",
+		"Motherboard Fan",
+		"Video Fan",
+		"Power Supply Fan",
+		"Chipset Fan",
+		"Other Fan",
+	};
+	int index = to_sensor_dev_attr(devattr)->index;
+	bool dock = false;
+	int type;
+
+	type = i8k_get_fan_type(index);
+	if (type < 0)
+		return type;
+
+	if (type & 0x10) {
+		dock = true;
+		type &= 0x0F;
+	}
+
+	if (type >= ARRAY_SIZE(labels))
+		type = (ARRAY_SIZE(labels) - 1);
+
+	return sprintf(buf, "%s%s\n", (dock ? "Docking " : ""), labels[type]);
+}
+
+static ssize_t i8k_hwmon_show_fan(struct device *dev,
+				  struct device_attribute *devattr,
+				  char *buf)
+{
+	int index = to_sensor_dev_attr(devattr)->index;
+	int fan_speed;
+
+	fan_speed = i8k_get_fan_speed(index);
+	if (fan_speed < 0)
+		return fan_speed;
+	return sprintf(buf, "%d\n", fan_speed);
+}
+
+static ssize_t i8k_hwmon_show_pwm(struct device *dev,
+				  struct device_attribute *devattr,
+				  char *buf)
+{
+	int index = to_sensor_dev_attr(devattr)->index;
+	int status;
+
+	status = i8k_get_fan_status(index);
+	if (status < 0)
+		return -EIO;
+	return sprintf(buf, "%d\n", clamp_val(status * i8k_pwm_mult, 0, 255));
+}
+
+static ssize_t i8k_hwmon_set_pwm(struct device *dev,
+				 struct device_attribute *attr,
+				 const char *buf, size_t count)
+{
+	int index = to_sensor_dev_attr(attr)->index;
+	unsigned long val;
+	int err;
+
+	err = kstrtoul(buf, 10, &val);
+	if (err)
+		return err;
+	val = clamp_val(DIV_ROUND_CLOSEST(val, i8k_pwm_mult), 0, i8k_fan_max);
+
+	mutex_lock(&i8k_mutex);
+	err = i8k_set_fan(index, val);
+	mutex_unlock(&i8k_mutex);
+
+	return err < 0 ? -EIO : count;
+}
+
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, i8k_hwmon_show_temp, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, i8k_hwmon_show_temp_label, NULL,
+			  0);
+static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, i8k_hwmon_show_temp, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp2_label, S_IRUGO, i8k_hwmon_show_temp_label, NULL,
+			  1);
+static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, i8k_hwmon_show_temp, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp3_label, S_IRUGO, i8k_hwmon_show_temp_label, NULL,
+			  2);
+static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, i8k_hwmon_show_temp, NULL, 3);
+static SENSOR_DEVICE_ATTR(temp4_label, S_IRUGO, i8k_hwmon_show_temp_label, NULL,
+			  3);
+static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, i8k_hwmon_show_fan, NULL, 0);
+static SENSOR_DEVICE_ATTR(fan1_label, S_IRUGO, i8k_hwmon_show_fan_label, NULL,
+			  0);
+static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, i8k_hwmon_show_pwm,
+			  i8k_hwmon_set_pwm, 0);
+static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, i8k_hwmon_show_fan, NULL,
+			  1);
+static SENSOR_DEVICE_ATTR(fan2_label, S_IRUGO, i8k_hwmon_show_fan_label, NULL,
+			  1);
+static SENSOR_DEVICE_ATTR(pwm2, S_IRUGO | S_IWUSR, i8k_hwmon_show_pwm,
+			  i8k_hwmon_set_pwm, 1);
+
+static struct attribute *i8k_attrs[] = {
+	&sensor_dev_attr_temp1_input.dev_attr.attr,	/* 0 */
+	&sensor_dev_attr_temp1_label.dev_attr.attr,	/* 1 */
+	&sensor_dev_attr_temp2_input.dev_attr.attr,	/* 2 */
+	&sensor_dev_attr_temp2_label.dev_attr.attr,	/* 3 */
+	&sensor_dev_attr_temp3_input.dev_attr.attr,	/* 4 */
+	&sensor_dev_attr_temp3_label.dev_attr.attr,	/* 5 */
+	&sensor_dev_attr_temp4_input.dev_attr.attr,	/* 6 */
+	&sensor_dev_attr_temp4_label.dev_attr.attr,	/* 7 */
+	&sensor_dev_attr_fan1_input.dev_attr.attr,	/* 8 */
+	&sensor_dev_attr_fan1_label.dev_attr.attr,	/* 9 */
+	&sensor_dev_attr_pwm1.dev_attr.attr,		/* 10 */
+	&sensor_dev_attr_fan2_input.dev_attr.attr,	/* 11 */
+	&sensor_dev_attr_fan2_label.dev_attr.attr,	/* 12 */
+	&sensor_dev_attr_pwm2.dev_attr.attr,		/* 13 */
+	NULL
+};
+
+static umode_t i8k_is_visible(struct kobject *kobj, struct attribute *attr,
+			      int index)
+{
+	if (index >= 0 && index <= 1 &&
+	    !(i8k_hwmon_flags & I8K_HWMON_HAVE_TEMP1))
+		return 0;
+	if (index >= 2 && index <= 3 &&
+	    !(i8k_hwmon_flags & I8K_HWMON_HAVE_TEMP2))
+		return 0;
+	if (index >= 4 && index <= 5 &&
+	    !(i8k_hwmon_flags & I8K_HWMON_HAVE_TEMP3))
+		return 0;
+	if (index >= 6 && index <= 7 &&
+	    !(i8k_hwmon_flags & I8K_HWMON_HAVE_TEMP4))
+		return 0;
+	if (index >= 8 && index <= 10 &&
+	    !(i8k_hwmon_flags & I8K_HWMON_HAVE_FAN1))
+		return 0;
+	if (index >= 11 && index <= 13 &&
+	    !(i8k_hwmon_flags & I8K_HWMON_HAVE_FAN2))
+		return 0;
+
+	return attr->mode;
+}
+
+static const struct attribute_group i8k_group = {
+	.attrs = i8k_attrs,
+	.is_visible = i8k_is_visible,
+};
+__ATTRIBUTE_GROUPS(i8k);
+
+static int __init i8k_init_hwmon(void)
+{
+	int err;
+
+	i8k_hwmon_flags = 0;
+
+	/* CPU temperature attributes, if temperature type is OK */
+	err = i8k_get_temp_type(0);
+	if (err >= 0)
+		i8k_hwmon_flags |= I8K_HWMON_HAVE_TEMP1;
+	/* check for additional temperature sensors */
+	err = i8k_get_temp_type(1);
+	if (err >= 0)
+		i8k_hwmon_flags |= I8K_HWMON_HAVE_TEMP2;
+	err = i8k_get_temp_type(2);
+	if (err >= 0)
+		i8k_hwmon_flags |= I8K_HWMON_HAVE_TEMP3;
+	err = i8k_get_temp_type(3);
+	if (err >= 0)
+		i8k_hwmon_flags |= I8K_HWMON_HAVE_TEMP4;
+
+	/* First fan attributes, if fan type is OK */
+	err = i8k_get_fan_type(0);
+	if (err >= 0)
+		i8k_hwmon_flags |= I8K_HWMON_HAVE_FAN1;
+
+	/* Second fan attributes, if fan type is OK */
+	err = i8k_get_fan_type(1);
+	if (err >= 0)
+		i8k_hwmon_flags |= I8K_HWMON_HAVE_FAN2;
+
+	i8k_hwmon_dev = hwmon_device_register_with_groups(NULL, "dell_smm",
+							  NULL, i8k_groups);
+	if (IS_ERR(i8k_hwmon_dev)) {
+		err = PTR_ERR(i8k_hwmon_dev);
+		i8k_hwmon_dev = NULL;
+		pr_err("hwmon registration failed (%d)\n", err);
+		return err;
+	}
+	return 0;
+}
+
+struct i8k_config_data {
+	uint fan_mult;
+	uint fan_max;
+};
+
+enum i8k_configs {
+	DELL_LATITUDE_D520,
+	DELL_PRECISION_490,
+	DELL_STUDIO,
+	DELL_XPS,
+};
+
+static const struct i8k_config_data i8k_config_data[] = {
+	[DELL_LATITUDE_D520] = {
+		.fan_mult = 1,
+		.fan_max = I8K_FAN_TURBO,
+	},
+	[DELL_PRECISION_490] = {
+		.fan_mult = 1,
+		.fan_max = I8K_FAN_TURBO,
+	},
+	[DELL_STUDIO] = {
+		.fan_mult = 1,
+		.fan_max = I8K_FAN_HIGH,
+	},
+	[DELL_XPS] = {
+		.fan_mult = 1,
+		.fan_max = I8K_FAN_HIGH,
+	},
+};
+
+static struct dmi_system_id i8k_dmi_table[] __initdata = {
+	{
+		.ident = "Dell Inspiron",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron"),
+		},
+	},
+	{
+		.ident = "Dell Latitude",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Latitude"),
+		},
+	},
+	{
+		.ident = "Dell Inspiron 2",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron"),
+		},
+	},
+	{
+		.ident = "Dell Latitude D520",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Latitude D520"),
+		},
+		.driver_data = (void *)&i8k_config_data[DELL_LATITUDE_D520],
+	},
+	{
+		.ident = "Dell Latitude 2",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Latitude"),
+		},
+	},
+	{	/* UK Inspiron 6400  */
+		.ident = "Dell Inspiron 3",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MM061"),
+		},
+	},
+	{
+		.ident = "Dell Inspiron 3",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MP061"),
+		},
+	},
+	{
+		.ident = "Dell Precision 490",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME,
+				  "Precision WorkStation 490"),
+		},
+		.driver_data = (void *)&i8k_config_data[DELL_PRECISION_490],
+	},
+	{
+		.ident = "Dell Precision",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Precision"),
+		},
+	},
+	{
+		.ident = "Dell Vostro",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Vostro"),
+		},
+	},
+	{
+		.ident = "Dell XPS421",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "XPS L421X"),
+		},
+	},
+	{
+		.ident = "Dell Studio",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Studio"),
+		},
+		.driver_data = (void *)&i8k_config_data[DELL_STUDIO],
+	},
+	{
+		.ident = "Dell XPS 13",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "XPS13"),
+		},
+		.driver_data = (void *)&i8k_config_data[DELL_XPS],
+	},
+	{
+		.ident = "Dell XPS M140",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MXC051"),
+		},
+		.driver_data = (void *)&i8k_config_data[DELL_XPS],
+	},
+	{ }
+};
+
+MODULE_DEVICE_TABLE(dmi, i8k_dmi_table);
+
+static struct dmi_system_id i8k_blacklist_dmi_table[] __initdata = {
+	{
+		/*
+		 * CPU fan speed going up and down on Dell Studio XPS 8000
+		 * for unknown reasons.
+		 */
+		.ident = "Dell Studio XPS 8000",
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Studio XPS 8000"),
+		},
+	},
+	{
+		/*
+		 * CPU fan speed going up and down on Dell Studio XPS 8100
+		 * for unknown reasons.
+		 */
+		.ident = "Dell Studio XPS 8100",
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Studio XPS 8100"),
+		},
+	},
+	{ }
+};
+
+/*
+ * Probe for the presence of a supported laptop.
+ */
+static int __init i8k_probe(void)
+{
+	const struct dmi_system_id *id;
+	int fan, ret;
+
+	/*
+	 * Get DMI information
+	 */
+	if (!dmi_check_system(i8k_dmi_table) ||
+	    dmi_check_system(i8k_blacklist_dmi_table)) {
+		if (!ignore_dmi && !force)
+			return -ENODEV;
+
+		pr_info("not running on a supported Dell system.\n");
+		pr_info("vendor=%s, model=%s, version=%s\n",
+			i8k_get_dmi_data(DMI_SYS_VENDOR),
+			i8k_get_dmi_data(DMI_PRODUCT_NAME),
+			i8k_get_dmi_data(DMI_BIOS_VERSION));
+	}
+
+	strlcpy(bios_version, i8k_get_dmi_data(DMI_BIOS_VERSION),
+		sizeof(bios_version));
+
+	/*
+	 * Get SMM Dell signature
+	 */
+	if (i8k_get_dell_signature(I8K_SMM_GET_DELL_SIG1) &&
+	    i8k_get_dell_signature(I8K_SMM_GET_DELL_SIG2)) {
+		pr_err("unable to get SMM Dell signature\n");
+		if (!force)
+			return -ENODEV;
+	}
+
+	/*
+	 * Set fan multiplier and maximal fan speed from dmi config
+	 * Values specified in module parameters override values from dmi
+	 */
+	id = dmi_first_match(i8k_dmi_table);
+	if (id && id->driver_data) {
+		const struct i8k_config_data *conf = id->driver_data;
+		if (!fan_mult && conf->fan_mult)
+			fan_mult = conf->fan_mult;
+		if (!fan_max && conf->fan_max)
+			fan_max = conf->fan_max;
+	}
+
+	i8k_fan_max = fan_max ? : I8K_FAN_HIGH;	/* Must not be 0 */
+	i8k_pwm_mult = DIV_ROUND_UP(255, i8k_fan_max);
+
+	if (!fan_mult) {
+		/*
+		 * Autodetect fan multiplier based on nominal rpm
+		 * If fan reports rpm value too high then set multiplier to 1
+		 */
+		for (fan = 0; fan < 2; ++fan) {
+			ret = i8k_get_fan_nominal_speed(fan, i8k_fan_max);
+			if (ret < 0)
+				continue;
+			if (ret > I8K_FAN_MAX_RPM)
+				i8k_fan_mult = 1;
+			break;
+		}
+	} else {
+		/* Fan multiplier was specified in module param or in dmi */
+		i8k_fan_mult = fan_mult;
+	}
+
+	return 0;
+}
+
+static int __init i8k_init(void)
+{
+	int err;
+
+	/* Are we running on an supported laptop? */
+	if (i8k_probe())
+		return -ENODEV;
+
+	err = i8k_init_hwmon();
+	if (err)
+		return err;
+
+	i8k_init_procfs();
+	return 0;
+}
+
+static void __exit i8k_exit(void)
+{
+	hwmon_device_unregister(i8k_hwmon_dev);
+	i8k_exit_procfs();
+}
+
+module_init(i8k_init);
+module_exit(i8k_exit);
diff --git a/kernel/drivers/hwmon/f71882fg.c b/kernel/drivers/hwmon/f71882fg.c
index 2e5c6f46e..cb28e4b4f 100644
--- a/kernel/drivers/hwmon/f71882fg.c
+++ b/kernel/drivers/hwmon/f71882fg.c
@@ -51,6 +51,7 @@
 #define SIO_F71808A_ID		0x1001	/* Chipset ID */
 #define SIO_F71858_ID		0x0507  /* Chipset ID */
 #define SIO_F71862_ID		0x0601	/* Chipset ID */
+#define SIO_F71868_ID		0x1106	/* Chipset ID */
 #define SIO_F71869_ID		0x0814	/* Chipset ID */
 #define SIO_F71869A_ID		0x1007	/* Chipset ID */
 #define SIO_F71882_ID		0x0541	/* Chipset ID */
@@ -58,7 +59,9 @@
 #define SIO_F71889E_ID		0x0909	/* Chipset ID */
 #define SIO_F71889A_ID		0x1005	/* Chipset ID */
 #define SIO_F8000_ID		0x0581	/* Chipset ID */
+#define SIO_F81768D_ID		0x1210	/* Chipset ID */
 #define SIO_F81865_ID		0x0704	/* Chipset ID */
+#define SIO_F81866_ID		0x1010	/* Chipset ID */
 
 #define REGION_LENGTH		8
 #define ADDR_REG_OFFSET		5
@@ -69,6 +72,10 @@
 #define F71882FG_REG_IN(nr)		(0x20  + (nr))
 #define F71882FG_REG_IN1_HIGH		0x32 /* f7188x only */
 
+#define F81866_REG_IN_STATUS		0x16 /* F81866 only */
+#define F81866_REG_IN_BEEP			0x17 /* F81866 only */
+#define F81866_REG_IN1_HIGH		0x3a /* F81866 only */
+
 #define F71882FG_REG_FAN(nr)		(0xA0 + (16 * (nr)))
 #define F71882FG_REG_FAN_TARGET(nr)	(0xA2 + (16 * (nr)))
 #define F71882FG_REG_FAN_FULL_SPEED(nr)	(0xA4 + (16 * (nr)))
@@ -101,7 +108,7 @@
 
 #define	F71882FG_REG_START		0x01
 
-#define F71882FG_MAX_INS		9
+#define F71882FG_MAX_INS		11
 
 #define FAN_MIN_DETECT			366 /* Lowest detectable fanspeed */
 
@@ -109,14 +116,16 @@ static unsigned short force_id;
 module_param(force_id, ushort, 0);
 MODULE_PARM_DESC(force_id, "Override the detected device ID");
 
-enum chips { f71808e, f71808a, f71858fg, f71862fg, f71869, f71869a, f71882fg,
-	     f71889fg, f71889ed, f71889a, f8000, f81865f };
+enum chips { f71808e, f71808a, f71858fg, f71862fg, f71868a, f71869, f71869a,
+	f71882fg, f71889fg, f71889ed, f71889a, f8000, f81768d, f81865f,
+	f81866a};
 
 static const char *const f71882fg_names[] = {
 	"f71808e",
 	"f71808a",
 	"f71858fg",
 	"f71862fg",
+	"f71868a",
 	"f71869", /* Both f71869f and f71869e, reg. compatible and same id */
 	"f71869a",
 	"f71882fg",
@@ -124,22 +133,27 @@ static const char *const f71882fg_names[] = {
 	"f71889ed",
 	"f71889a",
 	"f8000",
+	"f81768d",
 	"f81865f",
+	"f81866a",
 };
 
 static const char f71882fg_has_in[][F71882FG_MAX_INS] = {
-	[f71808e]	= { 1, 1, 1, 1, 1, 1, 0, 1, 1 },
-	[f71808a]	= { 1, 1, 1, 1, 0, 0, 0, 1, 1 },
-	[f71858fg]	= { 1, 1, 1, 0, 0, 0, 0, 0, 0 },
-	[f71862fg]	= { 1, 1, 1, 1, 1, 1, 1, 1, 1 },
-	[f71869]	= { 1, 1, 1, 1, 1, 1, 1, 1, 1 },
-	[f71869a]	= { 1, 1, 1, 1, 1, 1, 1, 1, 1 },
-	[f71882fg]	= { 1, 1, 1, 1, 1, 1, 1, 1, 1 },
-	[f71889fg]	= { 1, 1, 1, 1, 1, 1, 1, 1, 1 },
-	[f71889ed]	= { 1, 1, 1, 1, 1, 1, 1, 1, 1 },
-	[f71889a]	= { 1, 1, 1, 1, 1, 1, 1, 1, 1 },
-	[f8000]		= { 1, 1, 1, 0, 0, 0, 0, 0, 0 },
-	[f81865f]	= { 1, 1, 1, 1, 1, 1, 1, 0, 0 },
+	[f71808e]	= { 1, 1, 1, 1, 1, 1, 0, 1, 1, 0, 0 },
+	[f71808a]	= { 1, 1, 1, 1, 0, 0, 0, 1, 1, 0, 0 },
+	[f71858fg]	= { 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0 },
+	[f71862fg]	= { 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0 },
+	[f71868a]	= { 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0 },
+	[f71869]	= { 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0 },
+	[f71869a]	= { 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0 },
+	[f71882fg]	= { 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0 },
+	[f71889fg]	= { 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0 },
+	[f71889ed]	= { 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0 },
+	[f71889a]	= { 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0 },
+	[f8000]		= { 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0 },
+	[f81768d]	= { 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 },
+	[f81865f]	= { 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0 },
+	[f81866a]	= { 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0 },
 };
 
 static const char f71882fg_has_in1_alarm[] = {
@@ -147,6 +161,7 @@ static const char f71882fg_has_in1_alarm[] = {
 	[f71808a]	= 0,
 	[f71858fg]	= 0,
 	[f71862fg]	= 0,
+	[f71868a]	= 0,
 	[f71869]	= 0,
 	[f71869a]	= 0,
 	[f71882fg]	= 1,
@@ -154,7 +169,9 @@ static const char f71882fg_has_in1_alarm[] = {
 	[f71889ed]	= 1,
 	[f71889a]	= 1,
 	[f8000]		= 0,
+	[f81768d]	= 1,
 	[f81865f]	= 1,
+	[f81866a]	= 1,
 };
 
 static const char f71882fg_fan_has_beep[] = {
@@ -162,6 +179,7 @@ static const char f71882fg_fan_has_beep[] = {
 	[f71808a]	= 0,
 	[f71858fg]	= 0,
 	[f71862fg]	= 1,
+	[f71868a]	= 1,
 	[f71869]	= 1,
 	[f71869a]	= 1,
 	[f71882fg]	= 1,
@@ -169,7 +187,9 @@ static const char f71882fg_fan_has_beep[] = {
 	[f71889ed]	= 1,
 	[f71889a]	= 1,
 	[f8000]		= 0,
+	[f81768d]	= 1,
 	[f81865f]	= 1,
+	[f81866a]	= 1,
 };
 
 static const char f71882fg_nr_fans[] = {
@@ -177,6 +197,7 @@ static const char f71882fg_nr_fans[] = {
 	[f71808a]	= 2, /* +1 fan which is monitor + simple pwm only */
 	[f71858fg]	= 3,
 	[f71862fg]	= 3,
+	[f71868a]	= 3,
 	[f71869]	= 3,
 	[f71869a]	= 3,
 	[f71882fg]	= 4,
@@ -184,7 +205,9 @@ static const char f71882fg_nr_fans[] = {
 	[f71889ed]	= 3,
 	[f71889a]	= 3,
 	[f8000]		= 3, /* +1 fan which is monitor only */
+	[f81768d]	= 3,
 	[f81865f]	= 2,
+	[f81866a]	= 3,
 };
 
 static const char f71882fg_temp_has_beep[] = {
@@ -192,6 +215,7 @@ static const char f71882fg_temp_has_beep[] = {
 	[f71808a]	= 1,
 	[f71858fg]	= 0,
 	[f71862fg]	= 1,
+	[f71868a]	= 1,
 	[f71869]	= 1,
 	[f71869a]	= 1,
 	[f71882fg]	= 1,
@@ -199,7 +223,9 @@ static const char f71882fg_temp_has_beep[] = {
 	[f71889ed]	= 1,
 	[f71889a]	= 1,
 	[f8000]		= 0,
+	[f81768d]	= 1,
 	[f81865f]	= 1,
+	[f81866a]	= 1,
 };
 
 static const char f71882fg_nr_temps[] = {
@@ -207,6 +233,7 @@ static const char f71882fg_nr_temps[] = {
 	[f71808a]	= 2,
 	[f71858fg]	= 3,
 	[f71862fg]	= 3,
+	[f71868a]	= 3,
 	[f71869]	= 3,
 	[f71869a]	= 3,
 	[f71882fg]	= 3,
@@ -214,7 +241,9 @@ static const char f71882fg_nr_temps[] = {
 	[f71889ed]	= 3,
 	[f71889a]	= 3,
 	[f8000]		= 3,
+	[f81768d]	= 3,
 	[f81865f]	= 2,
+	[f81866a]	= 3,
 };
 
 static struct platform_device *f71882fg_pdev;
@@ -490,6 +519,23 @@ static struct sensor_device_attribute_2 fxxxx_temp_beep_attr[3][2] = { {
 		store_temp_beep, 0, 7),
 } };
 
+static struct sensor_device_attribute_2 f81866_temp_beep_attr[3][2] = { {
+	SENSOR_ATTR_2(temp1_max_beep, S_IRUGO|S_IWUSR, show_temp_beep,
+		store_temp_beep, 0, 0),
+	SENSOR_ATTR_2(temp1_crit_beep, S_IRUGO|S_IWUSR, show_temp_beep,
+		store_temp_beep, 0, 4),
+}, {
+	SENSOR_ATTR_2(temp2_max_beep, S_IRUGO|S_IWUSR, show_temp_beep,
+		store_temp_beep, 0, 1),
+	SENSOR_ATTR_2(temp2_crit_beep, S_IRUGO|S_IWUSR, show_temp_beep,
+		store_temp_beep, 0, 5),
+}, {
+	SENSOR_ATTR_2(temp3_max_beep, S_IRUGO|S_IWUSR, show_temp_beep,
+		store_temp_beep, 0, 2),
+	SENSOR_ATTR_2(temp3_crit_beep, S_IRUGO|S_IWUSR, show_temp_beep,
+		store_temp_beep, 0, 6),
+} };
+
 /*
  * Temp attr for the f8000
  * Note on the f8000 temp_ovt (crit) is used as max, and temp_high (max)
@@ -531,6 +577,8 @@ static struct sensor_device_attribute_2 fxxxx_in_attr[] = {
 	SENSOR_ATTR_2(in6_input, S_IRUGO, show_in, NULL, 0, 6),
 	SENSOR_ATTR_2(in7_input, S_IRUGO, show_in, NULL, 0, 7),
 	SENSOR_ATTR_2(in8_input, S_IRUGO, show_in, NULL, 0, 8),
+	SENSOR_ATTR_2(in9_input, S_IRUGO, show_in, NULL, 0, 9),
+	SENSOR_ATTR_2(in10_input, S_IRUGO, show_in, NULL, 0, 10),
 };
 
 /* For models with in1 alarm capability */
@@ -1170,10 +1218,21 @@ static struct f71882fg_data *f71882fg_update_device(struct device *dev)
 	if (time_after(jiffies, data->last_limits + 60 * HZ) ||
 			!data->valid) {
 		if (f71882fg_has_in1_alarm[data->type]) {
-			data->in1_max =
-				f71882fg_read8(data, F71882FG_REG_IN1_HIGH);
-			data->in_beep =
-				f71882fg_read8(data, F71882FG_REG_IN_BEEP);
+			if (data->type == f81866a) {
+				data->in1_max =
+					f71882fg_read8(data,
+						       F81866_REG_IN1_HIGH);
+				data->in_beep =
+					f71882fg_read8(data,
+						       F81866_REG_IN_BEEP);
+			} else {
+				data->in1_max =
+					f71882fg_read8(data,
+						       F71882FG_REG_IN1_HIGH);
+				data->in_beep =
+					f71882fg_read8(data,
+						       F71882FG_REG_IN_BEEP);
+			}
 		}
 
 		/* Get High & boundary temps*/
@@ -1297,9 +1356,16 @@ static struct f71882fg_data *f71882fg_update_device(struct device *dev)
 			data->fan[3] = f71882fg_read16(data,
 						F71882FG_REG_FAN(3));
 
-		if (f71882fg_has_in1_alarm[data->type])
-			data->in_status = f71882fg_read8(data,
+		if (f71882fg_has_in1_alarm[data->type]) {
+			if (data->type == f81866a)
+				data->in_status = f71882fg_read8(data,
+						F81866_REG_IN_STATUS);
+
+			else
+				data->in_status = f71882fg_read8(data,
 						F71882FG_REG_IN_STATUS);
+		}
+
 		for (nr = 0; nr < F71882FG_MAX_INS; nr++)
 			if (f71882fg_has_in[data->type][nr])
 				data->in[nr] = f71882fg_read8(data,
@@ -1440,7 +1506,10 @@ static ssize_t store_in_max(struct device *dev, struct device_attribute
 	val = clamp_val(val, 0, 255);
 
 	mutex_lock(&data->update_lock);
-	f71882fg_write8(data, F71882FG_REG_IN1_HIGH, val);
+	if (data->type == f81866a)
+		f71882fg_write8(data, F81866_REG_IN1_HIGH, val);
+	else
+		f71882fg_write8(data, F71882FG_REG_IN1_HIGH, val);
 	data->in1_max = val;
 	mutex_unlock(&data->update_lock);
 
@@ -1471,13 +1540,20 @@ static ssize_t store_in_beep(struct device *dev, struct device_attribute
 		return err;
 
 	mutex_lock(&data->update_lock);
-	data->in_beep = f71882fg_read8(data, F71882FG_REG_IN_BEEP);
+	if (data->type == f81866a)
+		data->in_beep = f71882fg_read8(data, F81866_REG_IN_BEEP);
+	else
+		data->in_beep = f71882fg_read8(data, F71882FG_REG_IN_BEEP);
+
 	if (val)
 		data->in_beep |= 1 << nr;
 	else
 		data->in_beep &= ~(1 << nr);
 
-	f71882fg_write8(data, F71882FG_REG_IN_BEEP, data->in_beep);
+	if (data->type == f81866a)
+		f71882fg_write8(data, F81866_REG_IN_BEEP, data->in_beep);
+	else
+		f71882fg_write8(data, F71882FG_REG_IN_BEEP, data->in_beep);
 	mutex_unlock(&data->update_lock);
 
 	return count;
@@ -2270,6 +2346,7 @@ static int f71882fg_probe(struct platform_device *pdev)
 	int nr_fans = f71882fg_nr_fans[sio_data->type];
 	int nr_temps = f71882fg_nr_temps[sio_data->type];
 	int err, i;
+	int size;
 	u8 start_reg, reg;
 
 	data = devm_kzalloc(&pdev->dev, sizeof(struct f71882fg_data),
@@ -2280,7 +2357,8 @@ static int f71882fg_probe(struct platform_device *pdev)
 	data->addr = platform_get_resource(pdev, IORESOURCE_IO, 0)->start;
 	data->type = sio_data->type;
 	data->temp_start =
-	    (data->type == f71858fg || data->type == f8000) ? 0 : 1;
+	    (data->type == f71858fg || data->type == f8000 ||
+		data->type == f81866a) ? 0 : 1;
 	mutex_init(&data->update_lock);
 	platform_set_drvdata(pdev, data);
 
@@ -2322,6 +2400,11 @@ static int f71882fg_probe(struct platform_device *pdev)
 					f8000_temp_attr,
 					ARRAY_SIZE(f8000_temp_attr));
 			break;
+		case f81866a:
+			err = f71882fg_create_sysfs_files(pdev,
+					f71858fg_temp_attr,
+					ARRAY_SIZE(f71858fg_temp_attr));
+			break;
 		default:
 			err = f71882fg_create_sysfs_files(pdev,
 				&fxxxx_temp_attr[0][0],
@@ -2331,10 +2414,18 @@ static int f71882fg_probe(struct platform_device *pdev)
 			goto exit_unregister_sysfs;
 
 		if (f71882fg_temp_has_beep[data->type]) {
-			err = f71882fg_create_sysfs_files(pdev,
-					&fxxxx_temp_beep_attr[0][0],
-					ARRAY_SIZE(fxxxx_temp_beep_attr[0])
-						* nr_temps);
+			if (data->type == f81866a) {
+				size = ARRAY_SIZE(f81866_temp_beep_attr[0]);
+				err = f71882fg_create_sysfs_files(pdev,
+						&f81866_temp_beep_attr[0][0],
+						size * nr_temps);
+
+			} else {
+				size = ARRAY_SIZE(fxxxx_temp_beep_attr[0]);
+				err = f71882fg_create_sysfs_files(pdev,
+						&fxxxx_temp_beep_attr[0][0],
+						size * nr_temps);
+			}
 			if (err)
 				goto exit_unregister_sysfs;
 		}
@@ -2451,15 +2542,27 @@ static int f71882fg_remove(struct platform_device *pdev)
 					f8000_temp_attr,
 					ARRAY_SIZE(f8000_temp_attr));
 			break;
+		case f81866a:
+			f71882fg_remove_sysfs_files(pdev,
+					f71858fg_temp_attr,
+					ARRAY_SIZE(f71858fg_temp_attr));
+			break;
 		default:
 			f71882fg_remove_sysfs_files(pdev,
 				&fxxxx_temp_attr[0][0],
 				ARRAY_SIZE(fxxxx_temp_attr[0]) * nr_temps);
 		}
 		if (f71882fg_temp_has_beep[data->type]) {
-			f71882fg_remove_sysfs_files(pdev,
-			       &fxxxx_temp_beep_attr[0][0],
-			       ARRAY_SIZE(fxxxx_temp_beep_attr[0]) * nr_temps);
+			if (data->type == f81866a)
+				f71882fg_remove_sysfs_files(pdev,
+					&f81866_temp_beep_attr[0][0],
+					ARRAY_SIZE(f81866_temp_beep_attr[0])
+						* nr_temps);
+			else
+				f71882fg_remove_sysfs_files(pdev,
+					&fxxxx_temp_beep_attr[0][0],
+					ARRAY_SIZE(fxxxx_temp_beep_attr[0])
+						* nr_temps);
 		}
 
 		for (i = 0; i < F71882FG_MAX_INS; i++) {
@@ -2551,6 +2654,9 @@ static int __init f71882fg_find(int sioaddr, struct f71882fg_sio_data *sio_data)
 	case SIO_F71862_ID:
 		sio_data->type = f71862fg;
 		break;
+	case SIO_F71868_ID:
+		sio_data->type = f71868a;
+		break;
 	case SIO_F71869_ID:
 		sio_data->type = f71869;
 		break;
@@ -2572,9 +2678,15 @@ static int __init f71882fg_find(int sioaddr, struct f71882fg_sio_data *sio_data)
 	case SIO_F8000_ID:
 		sio_data->type = f8000;
 		break;
+	case SIO_F81768D_ID:
+		sio_data->type = f81768d;
+		break;
 	case SIO_F81865_ID:
 		sio_data->type = f81865f;
 		break;
+	case SIO_F81866_ID:
+		sio_data->type = f81866a;
+		break;
 	default:
 		pr_info("Unsupported Fintek device: %04x\n",
 			(unsigned int)devid);
diff --git a/kernel/drivers/hwmon/fam15h_power.c b/kernel/drivers/hwmon/fam15h_power.c
index 3057dfc7e..5f7067d7b 100644
--- a/kernel/drivers/hwmon/fam15h_power.c
+++ b/kernel/drivers/hwmon/fam15h_power.c
@@ -26,6 +26,7 @@
 #include <linux/pci.h>
 #include <linux/bitops.h>
 #include <asm/processor.h>
+#include <asm/msr.h>
 
 MODULE_DESCRIPTION("AMD Family 15h CPU processor power monitor");
 MODULE_AUTHOR("Andreas Herrmann <herrmann.der.user@googlemail.com>");
@@ -41,11 +42,21 @@ MODULE_LICENSE("GPL");
 #define REG_TDP_RUNNING_AVERAGE		0xe0
 #define REG_TDP_LIMIT3			0xe8
 
+#define FAM15H_MIN_NUM_ATTRS		2
+#define FAM15H_NUM_GROUPS		2
+
+#define MSR_F15H_CU_MAX_PWR_ACCUMULATOR	0xc001007b
+
 struct fam15h_power_data {
 	struct pci_dev *pdev;
 	unsigned int tdp_to_watts;
 	unsigned int base_tdp;
 	unsigned int processor_pwr_watts;
+	unsigned int cpu_pwr_sample_ratio;
+	const struct attribute_group *groups[FAM15H_NUM_GROUPS];
+	struct attribute_group group;
+	/* maximum accumulated power of a compute unit */
+	u64 max_cu_acc_power;
 };
 
 static ssize_t show_power(struct device *dev,
@@ -59,8 +70,19 @@ static ssize_t show_power(struct device *dev,
 
 	pci_bus_read_config_dword(f4->bus, PCI_DEVFN(PCI_SLOT(f4->devfn), 5),
 				  REG_TDP_RUNNING_AVERAGE, &val);
-	running_avg_capture = (val >> 4) & 0x3fffff;
-	running_avg_capture = sign_extend32(running_avg_capture, 21);
+
+	/*
+	 * On Carrizo and later platforms, TdpRunAvgAccCap bit field
+	 * is extended to 4:31 from 4:25.
+	 */
+	if (boot_cpu_data.x86 == 0x15 && boot_cpu_data.x86_model >= 0x60) {
+		running_avg_capture = val >> 4;
+		running_avg_capture = sign_extend32(running_avg_capture, 27);
+	} else {
+		running_avg_capture = (val >> 4) & 0x3fffff;
+		running_avg_capture = sign_extend32(running_avg_capture, 21);
+	}
+
 	running_avg_range = (val & 0xf) + 1;
 
 	pci_bus_read_config_dword(f4->bus, PCI_DEVFN(PCI_SLOT(f4->devfn), 5),
@@ -93,31 +115,38 @@ static ssize_t show_power_crit(struct device *dev,
 }
 static DEVICE_ATTR(power1_crit, S_IRUGO, show_power_crit, NULL);
 
-static umode_t fam15h_power_is_visible(struct kobject *kobj,
-				       struct attribute *attr,
-				       int index)
+static int fam15h_power_init_attrs(struct pci_dev *pdev,
+				   struct fam15h_power_data *data)
 {
-	/* power1_input is only reported for Fam15h, Models 00h-0fh */
-	if (attr == &dev_attr_power1_input.attr &&
-	   (boot_cpu_data.x86 != 0x15 || boot_cpu_data.x86_model > 0xf))
-		return 0;
+	int n = FAM15H_MIN_NUM_ATTRS;
+	struct attribute **fam15h_power_attrs;
+	struct cpuinfo_x86 *c = &boot_cpu_data;
 
-	return attr->mode;
-}
+	if (c->x86 == 0x15 &&
+	    (c->x86_model <= 0xf ||
+	     (c->x86_model >= 0x60 && c->x86_model <= 0x6f)))
+		n += 1;
 
-static struct attribute *fam15h_power_attrs[] = {
-	&dev_attr_power1_input.attr,
-	&dev_attr_power1_crit.attr,
-	NULL
-};
+	fam15h_power_attrs = devm_kcalloc(&pdev->dev, n,
+					  sizeof(*fam15h_power_attrs),
+					  GFP_KERNEL);
 
-static const struct attribute_group fam15h_power_group = {
-	.attrs = fam15h_power_attrs,
-	.is_visible = fam15h_power_is_visible,
-};
-__ATTRIBUTE_GROUPS(fam15h_power);
+	if (!fam15h_power_attrs)
+		return -ENOMEM;
+
+	n = 0;
+	fam15h_power_attrs[n++] = &dev_attr_power1_crit.attr;
+	if (c->x86 == 0x15 &&
+	    (c->x86_model <= 0xf ||
+	     (c->x86_model >= 0x60 && c->x86_model <= 0x6f)))
+		fam15h_power_attrs[n++] = &dev_attr_power1_input.attr;
+
+	data->group.attrs = fam15h_power_attrs;
+
+	return 0;
+}
 
-static bool fam15h_power_is_internal_node0(struct pci_dev *f4)
+static bool should_load_on_this_node(struct pci_dev *f4)
 {
 	u32 val;
 
@@ -174,11 +203,12 @@ static int fam15h_power_resume(struct pci_dev *pdev)
 #define fam15h_power_resume NULL
 #endif
 
-static void fam15h_power_init_data(struct pci_dev *f4,
-					     struct fam15h_power_data *data)
+static int fam15h_power_init_data(struct pci_dev *f4,
+				  struct fam15h_power_data *data)
 {
-	u32 val;
+	u32 val, eax, ebx, ecx, edx;
 	u64 tmp;
+	int ret;
 
 	pci_read_config_dword(f4, REG_PROCESSOR_TDP, &val);
 	data->base_tdp = val >> 16;
@@ -198,14 +228,41 @@ static void fam15h_power_init_data(struct pci_dev *f4,
 
 	/* convert to microWatt */
 	data->processor_pwr_watts = (tmp * 15625) >> 10;
+
+	ret = fam15h_power_init_attrs(f4, data);
+	if (ret)
+		return ret;
+
+	cpuid(0x80000007, &eax, &ebx, &ecx, &edx);
+
+	/* CPUID Fn8000_0007:EDX[12] indicates to support accumulated power */
+	if (!(edx & BIT(12)))
+		return 0;
+
+	/*
+	 * determine the ratio of the compute unit power accumulator
+	 * sample period to the PTSC counter period by executing CPUID
+	 * Fn8000_0007:ECX
+	 */
+	data->cpu_pwr_sample_ratio = ecx;
+
+	if (rdmsrl_safe(MSR_F15H_CU_MAX_PWR_ACCUMULATOR, &tmp)) {
+		pr_err("Failed to read max compute unit power accumulator MSR\n");
+		return -ENODEV;
+	}
+
+	data->max_cu_acc_power = tmp;
+
+	return 0;
 }
 
 static int fam15h_power_probe(struct pci_dev *pdev,
-					const struct pci_device_id *id)
+			      const struct pci_device_id *id)
 {
 	struct fam15h_power_data *data;
 	struct device *dev = &pdev->dev;
 	struct device *hwmon_dev;
+	int ret;
 
 	/*
 	 * though we ignore every other northbridge, we still have to
@@ -214,25 +271,31 @@ static int fam15h_power_probe(struct pci_dev *pdev,
 	 */
 	tweak_runavg_range(pdev);
 
-	if (!fam15h_power_is_internal_node0(pdev))
+	if (!should_load_on_this_node(pdev))
 		return -ENODEV;
 
 	data = devm_kzalloc(dev, sizeof(struct fam15h_power_data), GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
 
-	fam15h_power_init_data(pdev, data);
+	ret = fam15h_power_init_data(pdev, data);
+	if (ret)
+		return ret;
+
 	data->pdev = pdev;
 
+	data->groups[0] = &data->group;
+
 	hwmon_dev = devm_hwmon_device_register_with_groups(dev, "fam15h_power",
 							   data,
-							   fam15h_power_groups);
+							   &data->groups[0]);
 	return PTR_ERR_OR_ZERO(hwmon_dev);
 }
 
 static const struct pci_device_id fam15h_power_id_table[] = {
 	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_NB_F4) },
 	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M30H_NB_F4) },
+	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M60H_NB_F4) },
 	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_16H_NB_F4) },
 	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_16H_M30H_NB_F4) },
 	{}
diff --git a/kernel/drivers/hwmon/g762.c b/kernel/drivers/hwmon/g762.c
index 9b55e673b..b96a2a9e4 100644
--- a/kernel/drivers/hwmon/g762.c
+++ b/kernel/drivers/hwmon/g762.c
@@ -582,6 +582,7 @@ static const struct of_device_id g762_dt_match[] = {
 	{ .compatible = "gmt,g763" },
 	{ },
 };
+MODULE_DEVICE_TABLE(of, g762_dt_match);
 
 /*
  * Grab clock (a required property), enable it, get (fixed) clock frequency
@@ -1112,7 +1113,6 @@ static int g762_remove(struct i2c_client *client)
 static struct i2c_driver g762_driver = {
 	.driver = {
 		.name = DRVNAME,
-		.owner = THIS_MODULE,
 		.of_match_table = of_match_ptr(g762_dt_match),
 	},
 	.probe	  = g762_probe,
diff --git a/kernel/drivers/hwmon/gpio-fan.c b/kernel/drivers/hwmon/gpio-fan.c
index a3dae6d00..685568b12 100644
--- a/kernel/drivers/hwmon/gpio-fan.c
+++ b/kernel/drivers/hwmon/gpio-fan.c
@@ -406,16 +406,11 @@ static int gpio_fan_get_cur_state(struct thermal_cooling_device *cdev,
 				  unsigned long *state)
 {
 	struct gpio_fan_data *fan_data = cdev->devdata;
-	int r;
 
 	if (!fan_data)
 		return -EINVAL;
 
-	r = get_fan_speed_index(fan_data);
-	if (r < 0)
-		return r;
-
-	*state = r;
+	*state = fan_data->speed_index;
 	return 0;
 }
 
@@ -539,6 +534,7 @@ static const struct of_device_id of_gpio_fan_match[] = {
 	{ .compatible = "gpio-fan", },
 	{},
 };
+MODULE_DEVICE_TABLE(of, of_gpio_fan_match);
 #endif /* CONFIG_OF_GPIO */
 
 static int gpio_fan_probe(struct platform_device *pdev)
diff --git a/kernel/drivers/hwmon/ibmpowernv.c b/kernel/drivers/hwmon/ibmpowernv.c
index 4255514b2..55b5a8ff1 100644
--- a/kernel/drivers/hwmon/ibmpowernv.c
+++ b/kernel/drivers/hwmon/ibmpowernv.c
@@ -474,11 +474,18 @@ static const struct platform_device_id opal_sensor_driver_ids[] = {
 };
 MODULE_DEVICE_TABLE(platform, opal_sensor_driver_ids);
 
+static const struct of_device_id opal_sensor_match[] = {
+	{ .compatible	= "ibm,opal-sensor" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, opal_sensor_match);
+
 static struct platform_driver ibmpowernv_driver = {
 	.probe		= ibmpowernv_probe,
 	.id_table	= opal_sensor_driver_ids,
 	.driver		= {
 		.name	= DRVNAME,
+		.of_match_table	= opal_sensor_match,
 	},
 };
 
diff --git a/kernel/drivers/hwmon/ina2xx.c b/kernel/drivers/hwmon/ina2xx.c
index 4d2815079..b24f1d304 100644
--- a/kernel/drivers/hwmon/ina2xx.c
+++ b/kernel/drivers/hwmon/ina2xx.c
@@ -37,6 +37,7 @@
 #include <linux/of.h>
 #include <linux/delay.h>
 #include <linux/util_macros.h>
+#include <linux/regmap.h>
 
 #include <linux/platform_data/ina2xx.h>
 
@@ -84,6 +85,11 @@
  */
 #define INA226_TOTAL_CONV_TIME_DEFAULT	2200
 
+static struct regmap_config ina2xx_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 16,
+};
+
 enum ina2xx_ids { ina219, ina226 };
 
 struct ina2xx_config {
@@ -97,20 +103,13 @@ struct ina2xx_config {
 };
 
 struct ina2xx_data {
-	struct i2c_client *client;
 	const struct ina2xx_config *config;
 
 	long rshunt;
-	u16 curr_config;
-
-	struct mutex update_lock;
-	bool valid;
-	unsigned long last_updated;
-	int update_interval; /* in jiffies */
+	struct mutex config_lock;
+	struct regmap *regmap;
 
-	int kind;
 	const struct attribute_group *groups[INA2XX_MAX_ATTRIBUTE_GROUPS];
-	u16 regs[INA2XX_MAX_REGISTERS];
 };
 
 static const struct ina2xx_config ina2xx_config[] = {
@@ -153,7 +152,11 @@ static int ina226_reg_to_interval(u16 config)
 	return DIV_ROUND_CLOSEST(avg * INA226_TOTAL_CONV_TIME_DEFAULT, 1000);
 }
 
-static u16 ina226_interval_to_reg(int interval, u16 config)
+/*
+ * Return the new, shifted AVG field value of CONFIG register,
+ * to use with regmap_update_bits
+ */
+static u16 ina226_interval_to_reg(int interval)
 {
 	int avg, avg_bits;
 
@@ -162,15 +165,7 @@ static u16 ina226_interval_to_reg(int interval, u16 config)
 	avg_bits = find_closest(avg, ina226_avg_tab,
 				ARRAY_SIZE(ina226_avg_tab));
 
-	return (config & ~INA226_AVG_RD_MASK) | INA226_SHIFT_AVG(avg_bits);
-}
-
-static void ina226_set_update_interval(struct ina2xx_data *data)
-{
-	int ms;
-
-	ms = ina226_reg_to_interval(data->curr_config);
-	data->update_interval = msecs_to_jiffies(ms);
+	return INA226_SHIFT_AVG(avg_bits);
 }
 
 static int ina2xx_calibrate(struct ina2xx_data *data)
@@ -178,8 +173,7 @@ static int ina2xx_calibrate(struct ina2xx_data *data)
 	u16 val = DIV_ROUND_CLOSEST(data->config->calibration_factor,
 				    data->rshunt);
 
-	return i2c_smbus_write_word_swapped(data->client,
-					    INA2XX_CALIBRATION, val);
+	return regmap_write(data->regmap, INA2XX_CALIBRATION, val);
 }
 
 /*
@@ -187,12 +181,8 @@ static int ina2xx_calibrate(struct ina2xx_data *data)
  */
 static int ina2xx_init(struct ina2xx_data *data)
 {
-	struct i2c_client *client = data->client;
-	int ret;
-
-	/* device configuration */
-	ret = i2c_smbus_write_word_swapped(client, INA2XX_CONFIG,
-					   data->curr_config);
+	int ret = regmap_write(data->regmap, INA2XX_CONFIG,
+			       data->config->config_default);
 	if (ret < 0)
 		return ret;
 
@@ -203,47 +193,52 @@ static int ina2xx_init(struct ina2xx_data *data)
 	return ina2xx_calibrate(data);
 }
 
-static int ina2xx_do_update(struct device *dev)
+static int ina2xx_read_reg(struct device *dev, int reg, unsigned int *regval)
 {
 	struct ina2xx_data *data = dev_get_drvdata(dev);
-	struct i2c_client *client = data->client;
-	int i, rv, retry;
+	int ret, retry;
 
-	dev_dbg(&client->dev, "Starting ina2xx update\n");
+	dev_dbg(dev, "Starting register %d read\n", reg);
 
 	for (retry = 5; retry; retry--) {
-		/* Read all registers */
-		for (i = 0; i < data->config->registers; i++) {
-			rv = i2c_smbus_read_word_swapped(client, i);
-			if (rv < 0)
-				return rv;
-			data->regs[i] = rv;
-		}
+
+		ret = regmap_read(data->regmap, reg, regval);
+		if (ret < 0)
+			return ret;
+
+		dev_dbg(dev, "read %d, val = 0x%04x\n", reg, *regval);
 
 		/*
 		 * If the current value in the calibration register is 0, the
 		 * power and current registers will also remain at 0. In case
 		 * the chip has been reset let's check the calibration
 		 * register and reinitialize if needed.
+		 * We do that extra read of the calibration register if there
+		 * is some hint of a chip reset.
 		 */
-		if (data->regs[INA2XX_CALIBRATION] == 0) {
-			dev_warn(dev, "chip not calibrated, reinitializing\n");
-
-			rv = ina2xx_init(data);
-			if (rv < 0)
-				return rv;
-
-			/*
-			 * Let's make sure the power and current registers
-			 * have been updated before trying again.
-			 */
-			msleep(INA2XX_MAX_DELAY);
-			continue;
+		if (*regval == 0) {
+			unsigned int cal;
+
+			ret = regmap_read(data->regmap, INA2XX_CALIBRATION,
+					  &cal);
+			if (ret < 0)
+				return ret;
+
+			if (cal == 0) {
+				dev_warn(dev, "chip not calibrated, reinitializing\n");
+
+				ret = ina2xx_init(data);
+				if (ret < 0)
+					return ret;
+				/*
+				 * Let's make sure the power and current
+				 * registers have been updated before trying
+				 * again.
+				 */
+				msleep(INA2XX_MAX_DELAY);
+				continue;
+			}
 		}
-
-		data->last_updated = jiffies;
-		data->valid = 1;
-
 		return 0;
 	}
 
@@ -256,51 +251,31 @@ static int ina2xx_do_update(struct device *dev)
 	return -ENODEV;
 }
 
-static struct ina2xx_data *ina2xx_update_device(struct device *dev)
-{
-	struct ina2xx_data *data = dev_get_drvdata(dev);
-	struct ina2xx_data *ret = data;
-	unsigned long after;
-	int rv;
-
-	mutex_lock(&data->update_lock);
-
-	after = data->last_updated + data->update_interval;
-	if (time_after(jiffies, after) || !data->valid) {
-		rv = ina2xx_do_update(dev);
-		if (rv < 0)
-			ret = ERR_PTR(rv);
-	}
-
-	mutex_unlock(&data->update_lock);
-	return ret;
-}
-
-static int ina2xx_get_value(struct ina2xx_data *data, u8 reg)
+static int ina2xx_get_value(struct ina2xx_data *data, u8 reg,
+			    unsigned int regval)
 {
 	int val;
 
 	switch (reg) {
 	case INA2XX_SHUNT_VOLTAGE:
 		/* signed register */
-		val = DIV_ROUND_CLOSEST((s16)data->regs[reg],
-					data->config->shunt_div);
+		val = DIV_ROUND_CLOSEST((s16)regval, data->config->shunt_div);
 		break;
 	case INA2XX_BUS_VOLTAGE:
-		val = (data->regs[reg] >> data->config->bus_voltage_shift)
+		val = (regval >> data->config->bus_voltage_shift)
 		  * data->config->bus_voltage_lsb;
 		val = DIV_ROUND_CLOSEST(val, 1000);
 		break;
 	case INA2XX_POWER:
-		val = data->regs[reg] * data->config->power_lsb;
+		val = regval * data->config->power_lsb;
 		break;
 	case INA2XX_CURRENT:
 		/* signed register, LSB=1mA (selected), in mA */
-		val = (s16)data->regs[reg];
+		val = (s16)regval;
 		break;
 	case INA2XX_CALIBRATION:
 		val = DIV_ROUND_CLOSEST(data->config->calibration_factor,
-					data->regs[reg]);
+					regval);
 		break;
 	default:
 		/* programmer goofed */
@@ -316,25 +291,25 @@ static ssize_t ina2xx_show_value(struct device *dev,
 				 struct device_attribute *da, char *buf)
 {
 	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
-	struct ina2xx_data *data = ina2xx_update_device(dev);
+	struct ina2xx_data *data = dev_get_drvdata(dev);
+	unsigned int regval;
+
+	int err = ina2xx_read_reg(dev, attr->index, &regval);
 
-	if (IS_ERR(data))
-		return PTR_ERR(data);
+	if (err < 0)
+		return err;
 
 	return snprintf(buf, PAGE_SIZE, "%d\n",
-			ina2xx_get_value(data, attr->index));
+			ina2xx_get_value(data, attr->index, regval));
 }
 
 static ssize_t ina2xx_set_shunt(struct device *dev,
 				struct device_attribute *da,
 				const char *buf, size_t count)
 {
-	struct ina2xx_data *data = ina2xx_update_device(dev);
 	unsigned long val;
 	int status;
-
-	if (IS_ERR(data))
-		return PTR_ERR(data);
+	struct ina2xx_data *data = dev_get_drvdata(dev);
 
 	status = kstrtoul(buf, 10, &val);
 	if (status < 0)
@@ -345,10 +320,10 @@ static ssize_t ina2xx_set_shunt(struct device *dev,
 	    val > data->config->calibration_factor)
 		return -EINVAL;
 
-	mutex_lock(&data->update_lock);
+	mutex_lock(&data->config_lock);
 	data->rshunt = val;
 	status = ina2xx_calibrate(data);
-	mutex_unlock(&data->update_lock);
+	mutex_unlock(&data->config_lock);
 	if (status < 0)
 		return status;
 
@@ -370,17 +345,9 @@ static ssize_t ina226_set_interval(struct device *dev,
 	if (val > INT_MAX || val == 0)
 		return -EINVAL;
 
-	mutex_lock(&data->update_lock);
-	data->curr_config = ina226_interval_to_reg(val,
-						   data->regs[INA2XX_CONFIG]);
-	status = i2c_smbus_write_word_swapped(data->client,
-					      INA2XX_CONFIG,
-					      data->curr_config);
-
-	ina226_set_update_interval(data);
-	/* Make sure the next access re-reads all registers. */
-	data->valid = 0;
-	mutex_unlock(&data->update_lock);
+	status = regmap_update_bits(data->regmap, INA2XX_CONFIG,
+				    INA226_AVG_RD_MASK,
+				    ina226_interval_to_reg(val));
 	if (status < 0)
 		return status;
 
@@ -390,18 +357,15 @@ static ssize_t ina226_set_interval(struct device *dev,
 static ssize_t ina226_show_interval(struct device *dev,
 				    struct device_attribute *da, char *buf)
 {
-	struct ina2xx_data *data = ina2xx_update_device(dev);
+	struct ina2xx_data *data = dev_get_drvdata(dev);
+	int status;
+	unsigned int regval;
 
-	if (IS_ERR(data))
-		return PTR_ERR(data);
+	status = regmap_read(data->regmap, INA2XX_CONFIG, &regval);
+	if (status)
+		return status;
 
-	/*
-	 * We don't use data->update_interval here as we want to display
-	 * the actual interval used by the chip and jiffies_to_msecs()
-	 * doesn't seem to be accurate enough.
-	 */
-	return snprintf(buf, PAGE_SIZE, "%d\n",
-			ina226_reg_to_interval(data->regs[INA2XX_CONFIG]));
+	return snprintf(buf, PAGE_SIZE, "%d\n", ina226_reg_to_interval(regval));
 }
 
 /* shunt voltage */
@@ -455,60 +419,51 @@ static const struct attribute_group ina226_group = {
 static int ina2xx_probe(struct i2c_client *client,
 			const struct i2c_device_id *id)
 {
-	struct i2c_adapter *adapter = client->adapter;
-	struct ina2xx_platform_data *pdata;
 	struct device *dev = &client->dev;
 	struct ina2xx_data *data;
 	struct device *hwmon_dev;
 	u32 val;
 	int ret, group = 0;
 
-	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA))
-		return -ENODEV;
-
 	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
 
-	if (dev_get_platdata(dev)) {
-		pdata = dev_get_platdata(dev);
-		data->rshunt = pdata->shunt_uohms;
-	} else if (!of_property_read_u32(dev->of_node,
-					 "shunt-resistor", &val)) {
-		data->rshunt = val;
-	} else {
-		data->rshunt = INA2XX_RSHUNT_DEFAULT;
-	}
-
 	/* set the device type */
-	data->kind = id->driver_data;
-	data->config = &ina2xx_config[data->kind];
-	data->curr_config = data->config->config_default;
-	data->client = client;
+	data->config = &ina2xx_config[id->driver_data];
 
-	/*
-	 * Ina226 has a variable update_interval. For ina219 we
-	 * use a constant value.
-	 */
-	if (data->kind == ina226)
-		ina226_set_update_interval(data);
-	else
-		data->update_interval = HZ / INA2XX_CONVERSION_RATE;
+	if (of_property_read_u32(dev->of_node, "shunt-resistor", &val) < 0) {
+		struct ina2xx_platform_data *pdata = dev_get_platdata(dev);
+
+		if (pdata)
+			val = pdata->shunt_uohms;
+		else
+			val = INA2XX_RSHUNT_DEFAULT;
+	}
 
-	if (data->rshunt <= 0 ||
-	    data->rshunt > data->config->calibration_factor)
+	if (val <= 0 || val > data->config->calibration_factor)
 		return -ENODEV;
 
+	data->rshunt = val;
+
+	ina2xx_regmap_config.max_register = data->config->registers;
+
+	data->regmap = devm_regmap_init_i2c(client, &ina2xx_regmap_config);
+	if (IS_ERR(data->regmap)) {
+		dev_err(dev, "failed to allocate register map\n");
+		return PTR_ERR(data->regmap);
+	}
+
 	ret = ina2xx_init(data);
 	if (ret < 0) {
 		dev_err(dev, "error configuring the device: %d\n", ret);
 		return -ENODEV;
 	}
 
-	mutex_init(&data->update_lock);
+	mutex_init(&data->config_lock);
 
 	data->groups[group++] = &ina2xx_group;
-	if (data->kind == ina226)
+	if (id->driver_data == ina226)
 		data->groups[group++] = &ina226_group;
 
 	hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
diff --git a/kernel/drivers/hwmon/it87.c b/kernel/drivers/hwmon/it87.c
index d0ee556e8..1896e26df 100644
--- a/kernel/drivers/hwmon/it87.c
+++ b/kernel/drivers/hwmon/it87.c
@@ -21,6 +21,7 @@
  *            IT8721F  Super I/O chip w/LPC interface
  *            IT8726F  Super I/O chip w/LPC interface
  *            IT8728F  Super I/O chip w/LPC interface
+ *            IT8732F  Super I/O chip w/LPC interface
  *            IT8758E  Super I/O chip w/LPC interface
  *            IT8771E  Super I/O chip w/LPC interface
  *            IT8772E  Super I/O chip w/LPC interface
@@ -69,8 +70,9 @@
 
 #define DRVNAME "it87"
 
-enum chips { it87, it8712, it8716, it8718, it8720, it8721, it8728, it8771,
-	     it8772, it8781, it8782, it8783, it8786, it8790, it8603, it8620 };
+enum chips { it87, it8712, it8716, it8718, it8720, it8721, it8728, it8732,
+	     it8771, it8772, it8781, it8782, it8783, it8786, it8790, it8603,
+	     it8620 };
 
 static unsigned short force_id;
 module_param(force_id, ushort, 0);
@@ -148,6 +150,7 @@ static inline void superio_exit(void)
 #define IT8721F_DEVID 0x8721
 #define IT8726F_DEVID 0x8726
 #define IT8728F_DEVID 0x8728
+#define IT8732F_DEVID 0x8732
 #define IT8771E_DEVID 0x8771
 #define IT8772E_DEVID 0x8772
 #define IT8781F_DEVID 0x8781
@@ -265,6 +268,7 @@ struct it87_devices {
 #define FEAT_VID		(1 << 9)	/* Set if chip supports VID */
 #define FEAT_IN7_INTERNAL	(1 << 10)	/* Set if in7 is internal */
 #define FEAT_SIX_FANS		(1 << 11)	/* Supports six fans */
+#define FEAT_10_9MV_ADC		(1 << 12)
 
 static const struct it87_devices it87_devices[] = {
 	[it87] = {
@@ -315,6 +319,15 @@ static const struct it87_devices it87_devices[] = {
 		  | FEAT_IN7_INTERNAL,
 		.peci_mask = 0x07,
 	},
+	[it8732] = {
+		.name = "it8732",
+		.suffix = "F",
+		.features = FEAT_NEWER_AUTOPWM | FEAT_16BIT_FANS
+		  | FEAT_TEMP_OFFSET | FEAT_TEMP_OLD_PECI | FEAT_TEMP_PECI
+		  | FEAT_10_9MV_ADC | FEAT_IN7_INTERNAL,
+		.peci_mask = 0x07,
+		.old_peci_mask = 0x02,	/* Actually reports PCH */
+	},
 	[it8771] = {
 		.name = "it8771",
 		.suffix = "E",
@@ -391,6 +404,7 @@ static const struct it87_devices it87_devices[] = {
 
 #define has_16bit_fans(data)	((data)->features & FEAT_16BIT_FANS)
 #define has_12mv_adc(data)	((data)->features & FEAT_12MV_ADC)
+#define has_10_9mv_adc(data)	((data)->features & FEAT_10_9MV_ADC)
 #define has_newer_autopwm(data)	((data)->features & FEAT_NEWER_AUTOPWM)
 #define has_old_autopwm(data)	((data)->features & FEAT_OLD_AUTOPWM)
 #define has_temp_offset(data)	((data)->features & FEAT_TEMP_OFFSET)
@@ -475,7 +489,14 @@ struct it87_data {
 
 static int adc_lsb(const struct it87_data *data, int nr)
 {
-	int lsb = has_12mv_adc(data) ? 12 : 16;
+	int lsb;
+
+	if (has_12mv_adc(data))
+		lsb = 120;
+	else if (has_10_9mv_adc(data))
+		lsb = 109;
+	else
+		lsb = 160;
 	if (data->in_scaled & (1 << nr))
 		lsb <<= 1;
 	return lsb;
@@ -483,13 +504,13 @@ static int adc_lsb(const struct it87_data *data, int nr)
 
 static u8 in_to_reg(const struct it87_data *data, int nr, long val)
 {
-	val = DIV_ROUND_CLOSEST(val, adc_lsb(data, nr));
+	val = DIV_ROUND_CLOSEST(val * 10, adc_lsb(data, nr));
 	return clamp_val(val, 0, 255);
 }
 
 static int in_from_reg(const struct it87_data *data, int nr, int val)
 {
-	return val * adc_lsb(data, nr);
+	return DIV_ROUND_CLOSEST(val * adc_lsb(data, nr), 10);
 }
 
 static inline u8 FAN_TO_REG(long rpm, int div)
@@ -1515,9 +1536,14 @@ static ssize_t show_label(struct device *dev, struct device_attribute *attr,
 	};
 	struct it87_data *data = dev_get_drvdata(dev);
 	int nr = to_sensor_dev_attr(attr)->index;
+	const char *label;
 
-	return sprintf(buf, "%s\n", has_12mv_adc(data) ? labels_it8721[nr]
-						       : labels[nr]);
+	if (has_12mv_adc(data) || has_10_9mv_adc(data))
+		label = labels_it8721[nr];
+	else
+		label = labels[nr];
+
+	return sprintf(buf, "%s\n", label);
 }
 static SENSOR_DEVICE_ATTR(in3_label, S_IRUGO, show_label, NULL, 0);
 static SENSOR_DEVICE_ATTR(in7_label, S_IRUGO, show_label, NULL, 1);
@@ -1853,6 +1879,9 @@ static int __init it87_find(unsigned short *address,
 	case IT8728F_DEVID:
 		sio_data->type = it8728;
 		break;
+	case IT8732F_DEVID:
+		sio_data->type = it8732;
+		break;
 	case IT8771E_DEVID:
 		sio_data->type = it8771;
 		break;
diff --git a/kernel/drivers/hwmon/k10temp.c b/kernel/drivers/hwmon/k10temp.c
index 1e7bdcdcb..9cdfde651 100644
--- a/kernel/drivers/hwmon/k10temp.c
+++ b/kernel/drivers/hwmon/k10temp.c
@@ -60,7 +60,6 @@ static DEFINE_MUTEX(nb_smu_ind_mutex);
  * Control]
  */
 #define F15H_M60H_REPORTED_TEMP_CTRL_OFFSET	0xd8200ca4
-#define PCI_DEVICE_ID_AMD_15H_M60H_NB_F3	0x1573
 
 static void amd_nb_smu_index_read(struct pci_dev *pdev, unsigned int devfn,
 				  int offset, u32 *val)
diff --git a/kernel/drivers/hwmon/lm70.c b/kernel/drivers/hwmon/lm70.c
index 97204dce1..583f883a4 100644
--- a/kernel/drivers/hwmon/lm70.c
+++ b/kernel/drivers/hwmon/lm70.c
@@ -37,6 +37,7 @@
 #include <linux/mod_devicetable.h>
 #include <linux/spi/spi.h>
 #include <linux/slab.h>
+#include <linux/of_device.h>
 
 
 #define DRVNAME		"lm70"
@@ -130,11 +131,41 @@ ATTRIBUTE_GROUPS(lm70);
 
 /*----------------------------------------------------------------------*/
 
+#ifdef CONFIG_OF
+static const struct of_device_id lm70_of_ids[] = {
+	{
+		.compatible = "ti,lm70",
+		.data = (void *) LM70_CHIP_LM70,
+	},
+	{
+		.compatible = "ti,tmp121",
+		.data = (void *) LM70_CHIP_TMP121,
+	},
+	{
+		.compatible = "ti,lm71",
+		.data = (void *) LM70_CHIP_LM71,
+	},
+	{
+		.compatible = "ti,lm74",
+		.data = (void *) LM70_CHIP_LM74,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, lm70_of_ids);
+#endif
+
 static int lm70_probe(struct spi_device *spi)
 {
-	int chip = spi_get_device_id(spi)->driver_data;
+	const struct of_device_id *match;
 	struct device *hwmon_dev;
 	struct lm70 *p_lm70;
+	int chip;
+
+	match = of_match_device(lm70_of_ids, &spi->dev);
+	if (match)
+		chip = (int)(uintptr_t)match->data;
+	else
+		chip = spi_get_device_id(spi)->driver_data;
 
 	/* signaling is SPI_MODE_0 */
 	if (spi->mode & (SPI_CPOL | SPI_CPHA))
@@ -168,7 +199,7 @@ MODULE_DEVICE_TABLE(spi, lm70_ids);
 static struct spi_driver lm70_driver = {
 	.driver = {
 		.name	= "lm70",
-		.owner	= THIS_MODULE,
+		.of_match_table	= of_match_ptr(lm70_of_ids),
 	},
 	.id_table = lm70_ids,
 	.probe	= lm70_probe,
diff --git a/kernel/drivers/hwmon/lm75.c b/kernel/drivers/hwmon/lm75.c
index fe41d5ae7..0addc84ba 100644
--- a/kernel/drivers/hwmon/lm75.c
+++ b/kernel/drivers/hwmon/lm75.c
@@ -57,6 +57,7 @@ enum lm75_type {		/* keep sorted in alphabetical order */
 	tmp175,
 	tmp275,
 	tmp75,
+	tmp75c,
 };
 
 /* Addresses scanned */
@@ -104,7 +105,7 @@ static inline long lm75_reg_to_mc(s16 temp, u8 resolution)
 
 /* sysfs attributes for hwmon */
 
-static int lm75_read_temp(void *dev, long *temp)
+static int lm75_read_temp(void *dev, int *temp)
 {
 	struct lm75_data *data = lm75_update_device(dev);
 
@@ -280,6 +281,11 @@ lm75_probe(struct i2c_client *client, const struct i2c_device_id *id)
 		data->resolution = 12;
 		data->sample_time = HZ / 2;
 		break;
+	case tmp75c:
+		clr_mask |= 1 << 5;		/* not one-shot mode */
+		data->resolution = 12;
+		data->sample_time = HZ / 4;
+		break;
 	}
 
 	/* configure as specified */
@@ -343,6 +349,7 @@ static const struct i2c_device_id lm75_ids[] = {
 	{ "tmp175", tmp175, },
 	{ "tmp275", tmp275, },
 	{ "tmp75", tmp75, },
+	{ "tmp75c", tmp75c, },
 	{ /* LIST END */ }
 };
 MODULE_DEVICE_TABLE(i2c, lm75_ids);
diff --git a/kernel/drivers/hwmon/max1111.c b/kernel/drivers/hwmon/max1111.c
index f67d71ee8..36544c4f6 100644
--- a/kernel/drivers/hwmon/max1111.c
+++ b/kernel/drivers/hwmon/max1111.c
@@ -277,7 +277,6 @@ MODULE_DEVICE_TABLE(spi, max1111_ids);
 static struct spi_driver max1111_driver = {
 	.driver		= {
 		.name	= "max1111",
-		.owner	= THIS_MODULE,
 	},
 	.id_table	= max1111_ids,
 	.probe		= max1111_probe,
diff --git a/kernel/drivers/hwmon/max197.c b/kernel/drivers/hwmon/max197.c
index cb0dcfda9..076285695 100644
--- a/kernel/drivers/hwmon/max197.c
+++ b/kernel/drivers/hwmon/max197.c
@@ -324,7 +324,7 @@ static int max197_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static struct platform_device_id max197_device_ids[] = {
+static const struct platform_device_id max197_device_ids[] = {
 	{ "max197", max197 },
 	{ "max199", max199 },
 	{ }
diff --git a/kernel/drivers/hwmon/max31790.c b/kernel/drivers/hwmon/max31790.c
new file mode 100644
index 000000000..69c0ac80a
--- /dev/null
+++ b/kernel/drivers/hwmon/max31790.c
@@ -0,0 +1,603 @@
+/*
+ * max31790.c - Part of lm_sensors, Linux kernel modules for hardware
+ *             monitoring.
+ *
+ * (C) 2015 by Il Han <corone.il.han@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/err.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+/* MAX31790 registers */
+#define MAX31790_REG_GLOBAL_CONFIG	0x00
+#define MAX31790_REG_FAN_CONFIG(ch)	(0x02 + (ch))
+#define MAX31790_REG_FAN_DYNAMICS(ch)	(0x08 + (ch))
+#define MAX31790_REG_FAN_FAULT_STATUS2	0x10
+#define MAX31790_REG_FAN_FAULT_STATUS1	0x11
+#define MAX31790_REG_TACH_COUNT(ch)	(0x18 + (ch) * 2)
+#define MAX31790_REG_PWM_DUTY_CYCLE(ch)	(0x30 + (ch) * 2)
+#define MAX31790_REG_PWMOUT(ch)		(0x40 + (ch) * 2)
+#define MAX31790_REG_TARGET_COUNT(ch)	(0x50 + (ch) * 2)
+
+/* Fan Config register bits */
+#define MAX31790_FAN_CFG_RPM_MODE	0x80
+#define MAX31790_FAN_CFG_TACH_INPUT_EN	0x08
+#define MAX31790_FAN_CFG_TACH_INPUT	0x01
+
+/* Fan Dynamics register bits */
+#define MAX31790_FAN_DYN_SR_SHIFT	5
+#define MAX31790_FAN_DYN_SR_MASK	0xE0
+#define SR_FROM_REG(reg)		(((reg) & MAX31790_FAN_DYN_SR_MASK) \
+					 >> MAX31790_FAN_DYN_SR_SHIFT)
+
+#define FAN_RPM_MIN			120
+#define FAN_RPM_MAX			7864320
+
+#define RPM_FROM_REG(reg, sr)		(((reg) >> 4) ? \
+					 ((60 * (sr) * 8192) / ((reg) >> 4)) : \
+					 FAN_RPM_MAX)
+#define RPM_TO_REG(rpm, sr)		((60 * (sr) * 8192) / ((rpm) * 2))
+
+#define NR_CHANNEL			6
+
+/*
+ * Client data (each client gets its own)
+ */
+struct max31790_data {
+	struct i2c_client *client;
+	struct mutex update_lock;
+	bool valid; /* zero until following fields are valid */
+	unsigned long last_updated; /* in jiffies */
+
+	/* register values */
+	u8 fan_config[NR_CHANNEL];
+	u8 fan_dynamics[NR_CHANNEL];
+	u16 fault_status;
+	u16 tach[NR_CHANNEL * 2];
+	u16 pwm[NR_CHANNEL];
+	u16 target_count[NR_CHANNEL];
+};
+
+static struct max31790_data *max31790_update_device(struct device *dev)
+{
+	struct max31790_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
+	struct max31790_data *ret = data;
+	int i;
+	int rv;
+
+	mutex_lock(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
+		rv = i2c_smbus_read_byte_data(client,
+				MAX31790_REG_FAN_FAULT_STATUS1);
+		if (rv < 0)
+			goto abort;
+		data->fault_status = rv & 0x3F;
+
+		rv = i2c_smbus_read_byte_data(client,
+				MAX31790_REG_FAN_FAULT_STATUS2);
+		if (rv < 0)
+			goto abort;
+		data->fault_status |= (rv & 0x3F) << 6;
+
+		for (i = 0; i < NR_CHANNEL; i++) {
+			rv = i2c_smbus_read_word_swapped(client,
+					MAX31790_REG_TACH_COUNT(i));
+			if (rv < 0)
+				goto abort;
+			data->tach[i] = rv;
+
+			if (data->fan_config[i]
+			    & MAX31790_FAN_CFG_TACH_INPUT) {
+				rv = i2c_smbus_read_word_swapped(client,
+					MAX31790_REG_TACH_COUNT(NR_CHANNEL
+								+ i));
+				if (rv < 0)
+					goto abort;
+				data->tach[NR_CHANNEL + i] = rv;
+			} else {
+				rv = i2c_smbus_read_word_swapped(client,
+						MAX31790_REG_PWMOUT(i));
+				if (rv < 0)
+					goto abort;
+				data->pwm[i] = rv;
+
+				rv = i2c_smbus_read_word_swapped(client,
+						MAX31790_REG_TARGET_COUNT(i));
+				if (rv < 0)
+					goto abort;
+				data->target_count[i] = rv;
+			}
+		}
+
+		data->last_updated = jiffies;
+		data->valid = true;
+	}
+	goto done;
+
+abort:
+	data->valid = false;
+	ret = ERR_PTR(rv);
+
+done:
+	mutex_unlock(&data->update_lock);
+
+	return ret;
+}
+
+static const u8 tach_period[8] = { 1, 2, 4, 8, 16, 32, 32, 32 };
+
+static u8 get_tach_period(u8 fan_dynamics)
+{
+	return tach_period[SR_FROM_REG(fan_dynamics)];
+}
+
+static u8 bits_for_tach_period(int rpm)
+{
+	u8 bits;
+
+	if (rpm < 500)
+		bits = 0x0;
+	else if (rpm < 1000)
+		bits = 0x1;
+	else if (rpm < 2000)
+		bits = 0x2;
+	else if (rpm < 4000)
+		bits = 0x3;
+	else if (rpm < 8000)
+		bits = 0x4;
+	else
+		bits = 0x5;
+
+	return bits;
+}
+
+static ssize_t get_fan(struct device *dev,
+		       struct device_attribute *devattr, char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct max31790_data *data = max31790_update_device(dev);
+	int sr, rpm;
+
+	if (IS_ERR(data))
+		return PTR_ERR(data);
+
+	sr = get_tach_period(data->fan_dynamics[attr->index]);
+	rpm = RPM_FROM_REG(data->tach[attr->index], sr);
+
+	return sprintf(buf, "%d\n", rpm);
+}
+
+static ssize_t get_fan_target(struct device *dev,
+			      struct device_attribute *devattr, char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct max31790_data *data = max31790_update_device(dev);
+	int sr, rpm;
+
+	if (IS_ERR(data))
+		return PTR_ERR(data);
+
+	sr = get_tach_period(data->fan_dynamics[attr->index]);
+	rpm = RPM_FROM_REG(data->target_count[attr->index], sr);
+
+	return sprintf(buf, "%d\n", rpm);
+}
+
+static ssize_t set_fan_target(struct device *dev,
+			      struct device_attribute *devattr,
+			      const char *buf, size_t count)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct max31790_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
+	u8 bits;
+	int sr;
+	int target_count;
+	unsigned long rpm;
+	int err;
+
+	err = kstrtoul(buf, 10, &rpm);
+	if (err)
+		return err;
+
+	mutex_lock(&data->update_lock);
+
+	rpm = clamp_val(rpm, FAN_RPM_MIN, FAN_RPM_MAX);
+	bits = bits_for_tach_period(rpm);
+	data->fan_dynamics[attr->index] =
+			((data->fan_dynamics[attr->index]
+			  & ~MAX31790_FAN_DYN_SR_MASK)
+			 | (bits << MAX31790_FAN_DYN_SR_SHIFT));
+	err = i2c_smbus_write_byte_data(client,
+			MAX31790_REG_FAN_DYNAMICS(attr->index),
+			data->fan_dynamics[attr->index]);
+
+	if (err < 0) {
+		mutex_unlock(&data->update_lock);
+		return err;
+	}
+
+	sr = get_tach_period(data->fan_dynamics[attr->index]);
+	target_count = RPM_TO_REG(rpm, sr);
+	target_count = clamp_val(target_count, 0x1, 0x7FF);
+
+	data->target_count[attr->index] = target_count << 5;
+
+	err = i2c_smbus_write_word_swapped(client,
+			MAX31790_REG_TARGET_COUNT(attr->index),
+			data->target_count[attr->index]);
+
+	mutex_unlock(&data->update_lock);
+
+	if (err < 0)
+		return err;
+
+	return count;
+}
+
+static ssize_t get_pwm(struct device *dev,
+		       struct device_attribute *devattr, char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct max31790_data *data = max31790_update_device(dev);
+	int pwm;
+
+	if (IS_ERR(data))
+		return PTR_ERR(data);
+
+	pwm = data->pwm[attr->index] >> 8;
+
+	return sprintf(buf, "%d\n", pwm);
+}
+
+static ssize_t set_pwm(struct device *dev,
+		       struct device_attribute *devattr,
+		       const char *buf, size_t count)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct max31790_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
+	unsigned long pwm;
+	int err;
+
+	err = kstrtoul(buf, 10, &pwm);
+	if (err)
+		return err;
+
+	if (pwm > 255)
+		return -EINVAL;
+
+	mutex_lock(&data->update_lock);
+
+	data->pwm[attr->index] = pwm << 8;
+	err = i2c_smbus_write_word_swapped(client,
+			MAX31790_REG_PWMOUT(attr->index),
+			data->pwm[attr->index]);
+
+	mutex_unlock(&data->update_lock);
+
+	if (err < 0)
+		return err;
+
+	return count;
+}
+
+static ssize_t get_pwm_enable(struct device *dev,
+			      struct device_attribute *devattr, char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct max31790_data *data = max31790_update_device(dev);
+	int mode;
+
+	if (IS_ERR(data))
+		return PTR_ERR(data);
+
+	if (data->fan_config[attr->index] & MAX31790_FAN_CFG_RPM_MODE)
+		mode = 2;
+	else if (data->fan_config[attr->index] & MAX31790_FAN_CFG_TACH_INPUT_EN)
+		mode = 1;
+	else
+		mode = 0;
+
+	return sprintf(buf, "%d\n", mode);
+}
+
+static ssize_t set_pwm_enable(struct device *dev,
+			      struct device_attribute *devattr,
+			      const char *buf, size_t count)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct max31790_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
+	unsigned long mode;
+	int err;
+
+	err = kstrtoul(buf, 10, &mode);
+	if (err)
+		return err;
+
+	switch (mode) {
+	case 0:
+		data->fan_config[attr->index] =
+			data->fan_config[attr->index]
+			& ~(MAX31790_FAN_CFG_TACH_INPUT_EN
+			    | MAX31790_FAN_CFG_RPM_MODE);
+		break;
+	case 1:
+		data->fan_config[attr->index] =
+			(data->fan_config[attr->index]
+			 | MAX31790_FAN_CFG_TACH_INPUT_EN)
+			& ~MAX31790_FAN_CFG_RPM_MODE;
+		break;
+	case 2:
+		data->fan_config[attr->index] =
+			data->fan_config[attr->index]
+			| MAX31790_FAN_CFG_TACH_INPUT_EN
+			| MAX31790_FAN_CFG_RPM_MODE;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	mutex_lock(&data->update_lock);
+
+	err = i2c_smbus_write_byte_data(client,
+			MAX31790_REG_FAN_CONFIG(attr->index),
+			data->fan_config[attr->index]);
+
+	mutex_unlock(&data->update_lock);
+
+	if (err < 0)
+		return err;
+
+	return count;
+}
+
+static ssize_t get_fan_fault(struct device *dev,
+			     struct device_attribute *devattr, char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct max31790_data *data = max31790_update_device(dev);
+	int fault;
+
+	if (IS_ERR(data))
+		return PTR_ERR(data);
+
+	fault = !!(data->fault_status & (1 << attr->index));
+
+	return sprintf(buf, "%d\n", fault);
+}
+
+static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, get_fan, NULL, 0);
+static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, get_fan, NULL, 1);
+static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, get_fan, NULL, 2);
+static SENSOR_DEVICE_ATTR(fan4_input, S_IRUGO, get_fan, NULL, 3);
+static SENSOR_DEVICE_ATTR(fan5_input, S_IRUGO, get_fan, NULL, 4);
+static SENSOR_DEVICE_ATTR(fan6_input, S_IRUGO, get_fan, NULL, 5);
+
+static SENSOR_DEVICE_ATTR(fan1_fault, S_IRUGO, get_fan_fault, NULL, 0);
+static SENSOR_DEVICE_ATTR(fan2_fault, S_IRUGO, get_fan_fault, NULL, 1);
+static SENSOR_DEVICE_ATTR(fan3_fault, S_IRUGO, get_fan_fault, NULL, 2);
+static SENSOR_DEVICE_ATTR(fan4_fault, S_IRUGO, get_fan_fault, NULL, 3);
+static SENSOR_DEVICE_ATTR(fan5_fault, S_IRUGO, get_fan_fault, NULL, 4);
+static SENSOR_DEVICE_ATTR(fan6_fault, S_IRUGO, get_fan_fault, NULL, 5);
+
+static SENSOR_DEVICE_ATTR(fan7_input, S_IRUGO, get_fan, NULL, 6);
+static SENSOR_DEVICE_ATTR(fan8_input, S_IRUGO, get_fan, NULL, 7);
+static SENSOR_DEVICE_ATTR(fan9_input, S_IRUGO, get_fan, NULL, 8);
+static SENSOR_DEVICE_ATTR(fan10_input, S_IRUGO, get_fan, NULL, 9);
+static SENSOR_DEVICE_ATTR(fan11_input, S_IRUGO, get_fan, NULL, 10);
+static SENSOR_DEVICE_ATTR(fan12_input, S_IRUGO, get_fan, NULL, 11);
+
+static SENSOR_DEVICE_ATTR(fan7_fault, S_IRUGO, get_fan_fault, NULL, 6);
+static SENSOR_DEVICE_ATTR(fan8_fault, S_IRUGO, get_fan_fault, NULL, 7);
+static SENSOR_DEVICE_ATTR(fan9_fault, S_IRUGO, get_fan_fault, NULL, 8);
+static SENSOR_DEVICE_ATTR(fan10_fault, S_IRUGO, get_fan_fault, NULL, 9);
+static SENSOR_DEVICE_ATTR(fan11_fault, S_IRUGO, get_fan_fault, NULL, 10);
+static SENSOR_DEVICE_ATTR(fan12_fault, S_IRUGO, get_fan_fault, NULL, 11);
+
+static SENSOR_DEVICE_ATTR(fan1_target, S_IWUSR | S_IRUGO,
+		get_fan_target, set_fan_target, 0);
+static SENSOR_DEVICE_ATTR(fan2_target, S_IWUSR | S_IRUGO,
+		get_fan_target, set_fan_target, 1);
+static SENSOR_DEVICE_ATTR(fan3_target, S_IWUSR | S_IRUGO,
+		get_fan_target, set_fan_target, 2);
+static SENSOR_DEVICE_ATTR(fan4_target, S_IWUSR | S_IRUGO,
+		get_fan_target, set_fan_target, 3);
+static SENSOR_DEVICE_ATTR(fan5_target, S_IWUSR | S_IRUGO,
+		get_fan_target, set_fan_target, 4);
+static SENSOR_DEVICE_ATTR(fan6_target, S_IWUSR | S_IRUGO,
+		get_fan_target, set_fan_target, 5);
+
+static SENSOR_DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, get_pwm, set_pwm, 0);
+static SENSOR_DEVICE_ATTR(pwm2, S_IWUSR | S_IRUGO, get_pwm, set_pwm, 1);
+static SENSOR_DEVICE_ATTR(pwm3, S_IWUSR | S_IRUGO, get_pwm, set_pwm, 2);
+static SENSOR_DEVICE_ATTR(pwm4, S_IWUSR | S_IRUGO, get_pwm, set_pwm, 3);
+static SENSOR_DEVICE_ATTR(pwm5, S_IWUSR | S_IRUGO, get_pwm, set_pwm, 4);
+static SENSOR_DEVICE_ATTR(pwm6, S_IWUSR | S_IRUGO, get_pwm, set_pwm, 5);
+
+static SENSOR_DEVICE_ATTR(pwm1_enable, S_IWUSR | S_IRUGO,
+		get_pwm_enable, set_pwm_enable, 0);
+static SENSOR_DEVICE_ATTR(pwm2_enable, S_IWUSR | S_IRUGO,
+		get_pwm_enable, set_pwm_enable, 1);
+static SENSOR_DEVICE_ATTR(pwm3_enable, S_IWUSR | S_IRUGO,
+		get_pwm_enable, set_pwm_enable, 2);
+static SENSOR_DEVICE_ATTR(pwm4_enable, S_IWUSR | S_IRUGO,
+		get_pwm_enable, set_pwm_enable, 3);
+static SENSOR_DEVICE_ATTR(pwm5_enable, S_IWUSR | S_IRUGO,
+		get_pwm_enable, set_pwm_enable, 4);
+static SENSOR_DEVICE_ATTR(pwm6_enable, S_IWUSR | S_IRUGO,
+		get_pwm_enable, set_pwm_enable, 5);
+
+static struct attribute *max31790_attrs[] = {
+	&sensor_dev_attr_fan1_input.dev_attr.attr,
+	&sensor_dev_attr_fan2_input.dev_attr.attr,
+	&sensor_dev_attr_fan3_input.dev_attr.attr,
+	&sensor_dev_attr_fan4_input.dev_attr.attr,
+	&sensor_dev_attr_fan5_input.dev_attr.attr,
+	&sensor_dev_attr_fan6_input.dev_attr.attr,
+
+	&sensor_dev_attr_fan1_fault.dev_attr.attr,
+	&sensor_dev_attr_fan2_fault.dev_attr.attr,
+	&sensor_dev_attr_fan3_fault.dev_attr.attr,
+	&sensor_dev_attr_fan4_fault.dev_attr.attr,
+	&sensor_dev_attr_fan5_fault.dev_attr.attr,
+	&sensor_dev_attr_fan6_fault.dev_attr.attr,
+
+	&sensor_dev_attr_fan7_input.dev_attr.attr,
+	&sensor_dev_attr_fan8_input.dev_attr.attr,
+	&sensor_dev_attr_fan9_input.dev_attr.attr,
+	&sensor_dev_attr_fan10_input.dev_attr.attr,
+	&sensor_dev_attr_fan11_input.dev_attr.attr,
+	&sensor_dev_attr_fan12_input.dev_attr.attr,
+
+	&sensor_dev_attr_fan7_fault.dev_attr.attr,
+	&sensor_dev_attr_fan8_fault.dev_attr.attr,
+	&sensor_dev_attr_fan9_fault.dev_attr.attr,
+	&sensor_dev_attr_fan10_fault.dev_attr.attr,
+	&sensor_dev_attr_fan11_fault.dev_attr.attr,
+	&sensor_dev_attr_fan12_fault.dev_attr.attr,
+
+	&sensor_dev_attr_fan1_target.dev_attr.attr,
+	&sensor_dev_attr_fan2_target.dev_attr.attr,
+	&sensor_dev_attr_fan3_target.dev_attr.attr,
+	&sensor_dev_attr_fan4_target.dev_attr.attr,
+	&sensor_dev_attr_fan5_target.dev_attr.attr,
+	&sensor_dev_attr_fan6_target.dev_attr.attr,
+
+	&sensor_dev_attr_pwm1.dev_attr.attr,
+	&sensor_dev_attr_pwm2.dev_attr.attr,
+	&sensor_dev_attr_pwm3.dev_attr.attr,
+	&sensor_dev_attr_pwm4.dev_attr.attr,
+	&sensor_dev_attr_pwm5.dev_attr.attr,
+	&sensor_dev_attr_pwm6.dev_attr.attr,
+
+	&sensor_dev_attr_pwm1_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm2_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm3_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm4_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm5_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm6_enable.dev_attr.attr,
+	NULL
+};
+
+static umode_t max31790_attrs_visible(struct kobject *kobj,
+				     struct attribute *a, int n)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct max31790_data *data = dev_get_drvdata(dev);
+	struct device_attribute *devattr =
+			container_of(a, struct device_attribute, attr);
+	int index = to_sensor_dev_attr(devattr)->index % NR_CHANNEL;
+	u8 fan_config;
+
+	fan_config = data->fan_config[index];
+
+	if (n >= NR_CHANNEL * 2 && n < NR_CHANNEL * 4 &&
+	    !(fan_config & MAX31790_FAN_CFG_TACH_INPUT))
+		return 0;
+	if (n >= NR_CHANNEL * 4 && (fan_config & MAX31790_FAN_CFG_TACH_INPUT))
+		return 0;
+
+	return a->mode;
+}
+
+static const struct attribute_group max31790_group = {
+	.attrs = max31790_attrs,
+	.is_visible = max31790_attrs_visible,
+};
+__ATTRIBUTE_GROUPS(max31790);
+
+static int max31790_init_client(struct i2c_client *client,
+				struct max31790_data *data)
+{
+	int i, rv;
+
+	for (i = 0; i < NR_CHANNEL; i++) {
+		rv = i2c_smbus_read_byte_data(client,
+				MAX31790_REG_FAN_CONFIG(i));
+		if (rv < 0)
+			return rv;
+		data->fan_config[i] = rv;
+
+		rv = i2c_smbus_read_byte_data(client,
+				MAX31790_REG_FAN_DYNAMICS(i));
+		if (rv < 0)
+			return rv;
+		data->fan_dynamics[i] = rv;
+	}
+
+	return 0;
+}
+
+static int max31790_probe(struct i2c_client *client,
+			  const struct i2c_device_id *id)
+{
+	struct i2c_adapter *adapter = client->adapter;
+	struct device *dev = &client->dev;
+	struct max31790_data *data;
+	struct device *hwmon_dev;
+	int err;
+
+	if (!i2c_check_functionality(adapter,
+			I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA))
+		return -ENODEV;
+
+	data = devm_kzalloc(dev, sizeof(struct max31790_data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->client = client;
+	mutex_init(&data->update_lock);
+
+	/*
+	 * Initialize the max31790 chip
+	 */
+	err = max31790_init_client(client, data);
+	if (err)
+		return err;
+
+	hwmon_dev = devm_hwmon_device_register_with_groups(dev,
+			client->name, data, max31790_groups);
+
+	return PTR_ERR_OR_ZERO(hwmon_dev);
+}
+
+static const struct i2c_device_id max31790_id[] = {
+	{ "max31790", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, max31790_id);
+
+static struct i2c_driver max31790_driver = {
+	.class		= I2C_CLASS_HWMON,
+	.probe		= max31790_probe,
+	.driver = {
+		.name	= "max31790",
+	},
+	.id_table	= max31790_id,
+};
+
+module_i2c_driver(max31790_driver);
+
+MODULE_AUTHOR("Il Han <corone.il.han@gmail.com>");
+MODULE_DESCRIPTION("MAX31790 sensor driver");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/hwmon/nct6775.c b/kernel/drivers/hwmon/nct6775.c
index bd1c99dea..d7ebdf865 100644
--- a/kernel/drivers/hwmon/nct6775.c
+++ b/kernel/drivers/hwmon/nct6775.c
@@ -39,6 +39,7 @@
  * nct6779d    15      5       5       2+6    0xc560 0xc1    0x5ca3
  * nct6791d    15      6       6       2+6    0xc800 0xc1    0x5ca3
  * nct6792d    15      6       6       2+6    0xc910 0xc1    0x5ca3
+ * nct6793d    15      6       6       2+6    0xd120 0xc1    0x5ca3
  *
  * #temp lists the number of monitored temperature sources (first value) plus
  * the number of directly connectable temperature sensors (second value).
@@ -63,7 +64,7 @@
 
 #define USE_ALTERNATE
 
-enum kinds { nct6106, nct6775, nct6776, nct6779, nct6791, nct6792 };
+enum kinds { nct6106, nct6775, nct6776, nct6779, nct6791, nct6792, nct6793 };
 
 /* used to set data->name = nct6775_device_names[data->sio_kind] */
 static const char * const nct6775_device_names[] = {
@@ -73,6 +74,17 @@ static const char * const nct6775_device_names[] = {
 	"nct6779",
 	"nct6791",
 	"nct6792",
+	"nct6793",
+};
+
+static const char * const nct6775_sio_names[] __initconst = {
+	"NCT6106D",
+	"NCT6775F",
+	"NCT6776D/F",
+	"NCT6779D",
+	"NCT6791D",
+	"NCT6792D",
+	"NCT6793D",
 };
 
 static unsigned short force_id;
@@ -104,6 +116,7 @@ MODULE_PARM_DESC(fan_debounce, "Enable debouncing for fan RPM signal");
 #define SIO_NCT6779_ID		0xc560
 #define SIO_NCT6791_ID		0xc800
 #define SIO_NCT6792_ID		0xc910
+#define SIO_NCT6793_ID		0xd120
 #define SIO_ID_MASK		0xFFF0
 
 enum pwm_enable { off, manual, thermal_cruise, speed_cruise, sf3, sf4 };
@@ -354,6 +367,10 @@ static const u16 NCT6775_REG_TEMP_CRIT[ARRAY_SIZE(nct6775_temp_label) - 1]
 
 /* NCT6776 specific data */
 
+/* STEP_UP_TIME and STEP_DOWN_TIME regs are swapped for all chips but NCT6775 */
+#define NCT6776_REG_FAN_STEP_UP_TIME NCT6775_REG_FAN_STEP_DOWN_TIME
+#define NCT6776_REG_FAN_STEP_DOWN_TIME NCT6775_REG_FAN_STEP_UP_TIME
+
 static const s8 NCT6776_ALARM_BITS[] = {
 	0, 1, 2, 3, 8, 21, 20, 16,	/* in0.. in7 */
 	17, -1, -1, -1, -1, -1, -1,	/* in8..in14 */
@@ -498,16 +515,24 @@ static const char *const nct6779_temp_label[] = {
 	"PCH_DIM1_TEMP",
 	"PCH_DIM2_TEMP",
 	"PCH_DIM3_TEMP",
-	"BYTE_TEMP"
+	"BYTE_TEMP",
+	"",
+	"",
+	"",
+	"",
+	"Virtual_TEMP"
 };
 
-static const u16 NCT6779_REG_TEMP_ALTERNATE[ARRAY_SIZE(nct6779_temp_label) - 1]
+#define NCT6779_NUM_LABELS	(ARRAY_SIZE(nct6779_temp_label) - 5)
+#define NCT6791_NUM_LABELS	ARRAY_SIZE(nct6779_temp_label)
+
+static const u16 NCT6779_REG_TEMP_ALTERNATE[NCT6791_NUM_LABELS - 1]
 	= { 0x490, 0x491, 0x492, 0x493, 0x494, 0x495, 0, 0,
 	    0, 0, 0, 0, 0, 0, 0, 0,
 	    0, 0x400, 0x401, 0x402, 0x404, 0x405, 0x406, 0x407,
 	    0x408, 0 };
 
-static const u16 NCT6779_REG_TEMP_CRIT[ARRAY_SIZE(nct6779_temp_label) - 1]
+static const u16 NCT6779_REG_TEMP_CRIT[NCT6791_NUM_LABELS - 1]
 	= { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x709, 0x70a };
 
 /* NCT6791 specific data */
@@ -533,13 +558,83 @@ static const s8 NCT6791_ALARM_BITS[] = {
 	4, 5, 13, -1, -1, -1,		/* temp1..temp6 */
 	12, 9 };			/* intrusion0, intrusion1 */
 
-/* NCT6792 specific data */
+/* NCT6792/NCT6793 specific data */
 
 static const u16 NCT6792_REG_TEMP_MON[] = {
 	0x73, 0x75, 0x77, 0x79, 0x7b, 0x7d };
 static const u16 NCT6792_REG_BEEP[NUM_REG_BEEP] = {
 	0xb2, 0xb3, 0xb4, 0xb5, 0xbf };
 
+static const char *const nct6792_temp_label[] = {
+	"",
+	"SYSTIN",
+	"CPUTIN",
+	"AUXTIN0",
+	"AUXTIN1",
+	"AUXTIN2",
+	"AUXTIN3",
+	"",
+	"SMBUSMASTER 0",
+	"SMBUSMASTER 1",
+	"SMBUSMASTER 2",
+	"SMBUSMASTER 3",
+	"SMBUSMASTER 4",
+	"SMBUSMASTER 5",
+	"SMBUSMASTER 6",
+	"SMBUSMASTER 7",
+	"PECI Agent 0",
+	"PECI Agent 1",
+	"PCH_CHIP_CPU_MAX_TEMP",
+	"PCH_CHIP_TEMP",
+	"PCH_CPU_TEMP",
+	"PCH_MCH_TEMP",
+	"PCH_DIM0_TEMP",
+	"PCH_DIM1_TEMP",
+	"PCH_DIM2_TEMP",
+	"PCH_DIM3_TEMP",
+	"BYTE_TEMP",
+	"PECI Agent 0 Calibration",
+	"PECI Agent 1 Calibration",
+	"",
+	"",
+	"Virtual_TEMP"
+};
+
+static const char *const nct6793_temp_label[] = {
+	"",
+	"SYSTIN",
+	"CPUTIN",
+	"AUXTIN0",
+	"AUXTIN1",
+	"AUXTIN2",
+	"AUXTIN3",
+	"",
+	"SMBUSMASTER 0",
+	"SMBUSMASTER 1",
+	"",
+	"",
+	"",
+	"",
+	"",
+	"",
+	"PECI Agent 0",
+	"PECI Agent 1",
+	"PCH_CHIP_CPU_MAX_TEMP",
+	"PCH_CHIP_TEMP",
+	"PCH_CPU_TEMP",
+	"PCH_MCH_TEMP",
+	"Agent0 Dimm0 ",
+	"Agent0 Dimm1",
+	"Agent1 Dimm0",
+	"Agent1 Dimm1",
+	"BYTE_TEMP0",
+	"BYTE_TEMP1",
+	"PECI Agent 0 Calibration",
+	"PECI Agent 1 Calibration",
+	"",
+	"Virtual_TEMP"
+};
+
 /* NCT6102D/NCT6106D specific data */
 
 #define NCT6106_REG_VBAT	0x318
@@ -1056,6 +1151,7 @@ static bool is_word_sized(struct nct6775_data *data, u16 reg)
 	case nct6779:
 	case nct6791:
 	case nct6792:
+	case nct6793:
 		return reg == 0x150 || reg == 0x153 || reg == 0x155 ||
 		  ((reg & 0xfff0) == 0x4b0 && (reg & 0x000f) < 0x0b) ||
 		  reg == 0x402 ||
@@ -1407,6 +1503,7 @@ static void nct6775_update_pwm_limits(struct device *dev)
 		case nct6779:
 		case nct6791:
 		case nct6792:
+		case nct6793:
 			reg = nct6775_read_value(data,
 					data->REG_CRITICAL_PWM_ENABLE[i]);
 			if (reg & data->CRITICAL_PWM_ENABLE_MASK)
@@ -2822,6 +2919,7 @@ store_auto_pwm(struct device *dev, struct device_attribute *attr,
 		case nct6779:
 		case nct6791:
 		case nct6792:
+		case nct6793:
 			nct6775_write_value(data, data->REG_CRITICAL_PWM[nr],
 					    val);
 			reg = nct6775_read_value(data,
@@ -3256,7 +3354,7 @@ nct6775_check_fan_inputs(struct nct6775_data *data)
 		pwm4pin = false;
 		pwm5pin = false;
 		pwm6pin = false;
-	} else {	/* NCT6779D, NCT6791D, or NCT6792D */
+	} else {	/* NCT6779D, NCT6791D, NCT6792D, or NCT6793D */
 		regval = superio_inb(sioreg, 0x1c);
 
 		fan3pin = !(regval & (1 << 5));
@@ -3269,7 +3367,8 @@ nct6775_check_fan_inputs(struct nct6775_data *data)
 
 		fan4min = fan4pin;
 
-		if (data->kind == nct6791 || data->kind == nct6792) {
+		if (data->kind == nct6791 || data->kind == nct6792 ||
+		    data->kind == nct6793) {
 			regval = superio_inb(sioreg, 0x2d);
 			fan6pin = (regval & (1 << 1));
 			pwm6pin = (regval & (1 << 0));
@@ -3528,8 +3627,8 @@ static int nct6775_probe(struct platform_device *pdev)
 		data->REG_FAN_PULSES = NCT6776_REG_FAN_PULSES;
 		data->FAN_PULSE_SHIFT = NCT6775_FAN_PULSE_SHIFT;
 		data->REG_FAN_TIME[0] = NCT6775_REG_FAN_STOP_TIME;
-		data->REG_FAN_TIME[1] = NCT6775_REG_FAN_STEP_UP_TIME;
-		data->REG_FAN_TIME[2] = NCT6775_REG_FAN_STEP_DOWN_TIME;
+		data->REG_FAN_TIME[1] = NCT6776_REG_FAN_STEP_UP_TIME;
+		data->REG_FAN_TIME[2] = NCT6776_REG_FAN_STEP_DOWN_TIME;
 		data->REG_TOLERANCE_H = NCT6776_REG_TOLERANCE_H;
 		data->REG_PWM[0] = NCT6775_REG_PWM;
 		data->REG_PWM[1] = NCT6775_REG_FAN_START_OUTPUT;
@@ -3584,7 +3683,7 @@ static int nct6775_probe(struct platform_device *pdev)
 		data->speed_tolerance_limit = 63;
 
 		data->temp_label = nct6779_temp_label;
-		data->temp_label_num = ARRAY_SIZE(nct6779_temp_label);
+		data->temp_label_num = NCT6779_NUM_LABELS;
 
 		data->REG_CONFIG = NCT6775_REG_CONFIG;
 		data->REG_VBAT = NCT6775_REG_VBAT;
@@ -3600,8 +3699,8 @@ static int nct6775_probe(struct platform_device *pdev)
 		data->REG_FAN_PULSES = NCT6779_REG_FAN_PULSES;
 		data->FAN_PULSE_SHIFT = NCT6775_FAN_PULSE_SHIFT;
 		data->REG_FAN_TIME[0] = NCT6775_REG_FAN_STOP_TIME;
-		data->REG_FAN_TIME[1] = NCT6775_REG_FAN_STEP_UP_TIME;
-		data->REG_FAN_TIME[2] = NCT6775_REG_FAN_STEP_DOWN_TIME;
+		data->REG_FAN_TIME[1] = NCT6776_REG_FAN_STEP_UP_TIME;
+		data->REG_FAN_TIME[2] = NCT6776_REG_FAN_STEP_DOWN_TIME;
 		data->REG_TOLERANCE_H = NCT6776_REG_TOLERANCE_H;
 		data->REG_PWM[0] = NCT6775_REG_PWM;
 		data->REG_PWM[1] = NCT6775_REG_FAN_START_OUTPUT;
@@ -3643,6 +3742,7 @@ static int nct6775_probe(struct platform_device *pdev)
 		break;
 	case nct6791:
 	case nct6792:
+	case nct6793:
 		data->in_num = 15;
 		data->pwm_num = 6;
 		data->auto_pwm_num = 4;
@@ -3660,8 +3760,19 @@ static int nct6775_probe(struct platform_device *pdev)
 		data->tolerance_mask = 0x07;
 		data->speed_tolerance_limit = 63;
 
-		data->temp_label = nct6779_temp_label;
-		data->temp_label_num = ARRAY_SIZE(nct6779_temp_label);
+		switch (data->kind) {
+		default:
+		case nct6791:
+			data->temp_label = nct6779_temp_label;
+			break;
+		case nct6792:
+			data->temp_label = nct6792_temp_label;
+			break;
+		case nct6793:
+			data->temp_label = nct6793_temp_label;
+			break;
+		}
+		data->temp_label_num = NCT6791_NUM_LABELS;
 
 		data->REG_CONFIG = NCT6775_REG_CONFIG;
 		data->REG_VBAT = NCT6775_REG_VBAT;
@@ -3677,8 +3788,8 @@ static int nct6775_probe(struct platform_device *pdev)
 		data->REG_FAN_PULSES = NCT6779_REG_FAN_PULSES;
 		data->FAN_PULSE_SHIFT = NCT6775_FAN_PULSE_SHIFT;
 		data->REG_FAN_TIME[0] = NCT6775_REG_FAN_STOP_TIME;
-		data->REG_FAN_TIME[1] = NCT6775_REG_FAN_STEP_UP_TIME;
-		data->REG_FAN_TIME[2] = NCT6775_REG_FAN_STEP_DOWN_TIME;
+		data->REG_FAN_TIME[1] = NCT6776_REG_FAN_STEP_UP_TIME;
+		data->REG_FAN_TIME[2] = NCT6776_REG_FAN_STEP_DOWN_TIME;
 		data->REG_TOLERANCE_H = NCT6776_REG_TOLERANCE_H;
 		data->REG_PWM[0] = NCT6775_REG_PWM;
 		data->REG_PWM[1] = NCT6775_REG_FAN_START_OUTPUT;
@@ -3918,6 +4029,7 @@ static int nct6775_probe(struct platform_device *pdev)
 	case nct6779:
 	case nct6791:
 	case nct6792:
+	case nct6793:
 		break;
 	}
 
@@ -3950,6 +4062,7 @@ static int nct6775_probe(struct platform_device *pdev)
 			break;
 		case nct6791:
 		case nct6792:
+		case nct6793:
 			tmp |= 0x7e;
 			break;
 		}
@@ -4047,7 +4160,8 @@ static int __maybe_unused nct6775_resume(struct device *dev)
 	if (reg != data->sio_reg_enable)
 		superio_outb(sioreg, SIO_REG_ENABLE, data->sio_reg_enable);
 
-	if (data->kind == nct6791 || data->kind == nct6792)
+	if (data->kind == nct6791 || data->kind == nct6792 ||
+	    data->kind == nct6793)
 		nct6791_enable_io_mapping(sioreg);
 
 	superio_exit(sioreg);
@@ -4106,15 +4220,6 @@ static struct platform_driver nct6775_driver = {
 	.probe		= nct6775_probe,
 };
 
-static const char * const nct6775_sio_names[] __initconst = {
-	"NCT6106D",
-	"NCT6775F",
-	"NCT6776D/F",
-	"NCT6779D",
-	"NCT6791D",
-	"NCT6792D",
-};
-
 /* nct6775_find() looks for a '627 in the Super-I/O config space */
 static int __init nct6775_find(int sioaddr, struct nct6775_sio_data *sio_data)
 {
@@ -4150,6 +4255,9 @@ static int __init nct6775_find(int sioaddr, struct nct6775_sio_data *sio_data)
 	case SIO_NCT6792_ID:
 		sio_data->kind = nct6792;
 		break;
+	case SIO_NCT6793_ID:
+		sio_data->kind = nct6793;
+		break;
 	default:
 		if (val != 0xffff)
 			pr_debug("unsupported chip ID: 0x%04x\n", val);
@@ -4175,7 +4283,8 @@ static int __init nct6775_find(int sioaddr, struct nct6775_sio_data *sio_data)
 		superio_outb(sioaddr, SIO_REG_ENABLE, val | 0x01);
 	}
 
-	if (sio_data->kind == nct6791 || sio_data->kind == nct6792)
+	if (sio_data->kind == nct6791 || sio_data->kind == nct6792 ||
+	    sio_data->kind == nct6793)
 		nct6791_enable_io_mapping(sioaddr);
 
 	superio_exit(sioaddr);
@@ -4285,7 +4394,7 @@ static void __exit sensors_nct6775_exit(void)
 }
 
 MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
-MODULE_DESCRIPTION("NCT6106D/NCT6775F/NCT6776F/NCT6779D/NCT6791D/NCT6792D driver");
+MODULE_DESCRIPTION("Driver for NCT6775F and compatible chips");
 MODULE_LICENSE("GPL");
 
 module_init(sensors_nct6775_init);
diff --git a/kernel/drivers/hwmon/nct7802.c b/kernel/drivers/hwmon/nct7802.c
index fbfc02bb2..3ce33d244 100644
--- a/kernel/drivers/hwmon/nct7802.c
+++ b/kernel/drivers/hwmon/nct7802.c
@@ -49,10 +49,13 @@ static const u8 REG_VOLTAGE_LIMIT_MSB_SHIFT[2][5] = {
 #define REG_VOLTAGE_LOW		0x0f
 #define REG_FANCOUNT_LOW	0x13
 #define REG_START		0x21
-#define REG_MODE		0x22
+#define REG_MODE		0x22 /* 7.2.32 Mode Selection Register */
 #define REG_PECI_ENABLE		0x23
 #define REG_FAN_ENABLE		0x24
 #define REG_VMON_ENABLE		0x25
+#define REG_PWM(x)		(0x60 + (x))
+#define REG_SMARTFAN_EN(x)      (0x64 + (x) / 2)
+#define SMARTFAN_EN_SHIFT(x)    ((x) % 2 * 4)
 #define REG_VENDOR_ID		0xfd
 #define REG_CHIP_ID		0xfe
 #define REG_VERSION_ID		0xff
@@ -66,6 +69,129 @@ struct nct7802_data {
 	struct mutex access_lock; /* for multi-byte read and write operations */
 };
 
+static ssize_t show_temp_type(struct device *dev, struct device_attribute *attr,
+			      char *buf)
+{
+	struct nct7802_data *data = dev_get_drvdata(dev);
+	struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr);
+	unsigned int mode;
+	int ret;
+
+	ret = regmap_read(data->regmap, REG_MODE, &mode);
+	if (ret < 0)
+		return ret;
+
+	return sprintf(buf, "%u\n", (mode >> (2 * sattr->index) & 3) + 2);
+}
+
+static ssize_t store_temp_type(struct device *dev,
+			       struct device_attribute *attr,
+			       const char *buf, size_t count)
+{
+	struct nct7802_data *data = dev_get_drvdata(dev);
+	struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr);
+	unsigned int type;
+	int err;
+
+	err = kstrtouint(buf, 0, &type);
+	if (err < 0)
+		return err;
+	if (sattr->index == 2 && type != 4) /* RD3 */
+		return -EINVAL;
+	if (type < 3 || type > 4)
+		return -EINVAL;
+	err = regmap_update_bits(data->regmap, REG_MODE,
+			3 << 2 * sattr->index, (type - 2) << 2 * sattr->index);
+	return err ? : count;
+}
+
+static ssize_t show_pwm_mode(struct device *dev, struct device_attribute *attr,
+			     char *buf)
+{
+	struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr);
+	struct nct7802_data *data = dev_get_drvdata(dev);
+	unsigned int regval;
+	int ret;
+
+	if (sattr->index > 1)
+		return sprintf(buf, "1\n");
+
+	ret = regmap_read(data->regmap, 0x5E, &regval);
+	if (ret < 0)
+		return ret;
+
+	return sprintf(buf, "%u\n", !(regval & (1 << sattr->index)));
+}
+
+static ssize_t show_pwm(struct device *dev, struct device_attribute *devattr,
+			char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct nct7802_data *data = dev_get_drvdata(dev);
+	unsigned int val;
+	int ret;
+
+	if (!attr->index)
+		return sprintf(buf, "255\n");
+
+	ret = regmap_read(data->regmap, attr->index, &val);
+	if (ret < 0)
+		return ret;
+
+	return sprintf(buf, "%d\n", val);
+}
+
+static ssize_t store_pwm(struct device *dev, struct device_attribute *devattr,
+			 const char *buf, size_t count)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct nct7802_data *data = dev_get_drvdata(dev);
+	int err;
+	u8 val;
+
+	err = kstrtou8(buf, 0, &val);
+	if (err < 0)
+		return err;
+
+	err = regmap_write(data->regmap, attr->index, val);
+	return err ? : count;
+}
+
+static ssize_t show_pwm_enable(struct device *dev,
+			       struct device_attribute *attr, char *buf)
+{
+	struct nct7802_data *data = dev_get_drvdata(dev);
+	struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr);
+	unsigned int reg, enabled;
+	int ret;
+
+	ret = regmap_read(data->regmap, REG_SMARTFAN_EN(sattr->index), &reg);
+	if (ret < 0)
+		return ret;
+	enabled = reg >> SMARTFAN_EN_SHIFT(sattr->index) & 1;
+	return sprintf(buf, "%u\n", enabled + 1);
+}
+
+static ssize_t store_pwm_enable(struct device *dev,
+				struct device_attribute *attr,
+				const char *buf, size_t count)
+{
+	struct nct7802_data *data = dev_get_drvdata(dev);
+	struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr);
+	u8 val;
+	int ret;
+
+	ret = kstrtou8(buf, 0, &val);
+	if (ret < 0)
+		return ret;
+	if (val < 1 || val > 2)
+		return -EINVAL;
+	ret = regmap_update_bits(data->regmap, REG_SMARTFAN_EN(sattr->index),
+				 1 << SMARTFAN_EN_SHIFT(sattr->index),
+				 (val - 1) << SMARTFAN_EN_SHIFT(sattr->index));
+	return ret ? : count;
+}
+
 static int nct7802_read_temp(struct nct7802_data *data,
 			     u8 reg_temp, u8 reg_temp_low, int *temp)
 {
@@ -377,6 +503,8 @@ store_beep(struct device *dev, struct device_attribute *attr, const char *buf,
 	return err ? : count;
 }
 
+static SENSOR_DEVICE_ATTR(temp1_type, S_IRUGO | S_IWUSR,
+			  show_temp_type, store_temp_type, 0);
 static SENSOR_DEVICE_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, 0x01,
 			    REG_TEMP_LSB);
 static SENSOR_DEVICE_ATTR_2(temp1_min, S_IRUGO | S_IWUSR, show_temp,
@@ -386,6 +514,8 @@ static SENSOR_DEVICE_ATTR_2(temp1_max, S_IRUGO | S_IWUSR, show_temp,
 static SENSOR_DEVICE_ATTR_2(temp1_crit, S_IRUGO | S_IWUSR, show_temp,
 			    store_temp, 0x3a, 0);
 
+static SENSOR_DEVICE_ATTR(temp2_type, S_IRUGO | S_IWUSR,
+			  show_temp_type, store_temp_type, 1);
 static SENSOR_DEVICE_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, 0x02,
 			    REG_TEMP_LSB);
 static SENSOR_DEVICE_ATTR_2(temp2_min, S_IRUGO | S_IWUSR, show_temp,
@@ -395,6 +525,8 @@ static SENSOR_DEVICE_ATTR_2(temp2_max, S_IRUGO | S_IWUSR, show_temp,
 static SENSOR_DEVICE_ATTR_2(temp2_crit, S_IRUGO | S_IWUSR, show_temp,
 			    store_temp, 0x3b, 0);
 
+static SENSOR_DEVICE_ATTR(temp3_type, S_IRUGO | S_IWUSR,
+			  show_temp_type, store_temp_type, 2);
 static SENSOR_DEVICE_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, 0x03,
 			    REG_TEMP_LSB);
 static SENSOR_DEVICE_ATTR_2(temp3_min, S_IRUGO | S_IWUSR, show_temp,
@@ -475,6 +607,7 @@ static SENSOR_DEVICE_ATTR_2(temp6_beep, S_IRUGO | S_IWUSR, show_beep,
 			    store_beep, 0x5c, 5);
 
 static struct attribute *nct7802_temp_attrs[] = {
+	&sensor_dev_attr_temp1_type.dev_attr.attr,
 	&sensor_dev_attr_temp1_input.dev_attr.attr,
 	&sensor_dev_attr_temp1_min.dev_attr.attr,
 	&sensor_dev_attr_temp1_max.dev_attr.attr,
@@ -485,7 +618,8 @@ static struct attribute *nct7802_temp_attrs[] = {
 	&sensor_dev_attr_temp1_fault.dev_attr.attr,
 	&sensor_dev_attr_temp1_beep.dev_attr.attr,
 
-	&sensor_dev_attr_temp2_input.dev_attr.attr,		/* 9 */
+	&sensor_dev_attr_temp2_type.dev_attr.attr,		/* 10 */
+	&sensor_dev_attr_temp2_input.dev_attr.attr,
 	&sensor_dev_attr_temp2_min.dev_attr.attr,
 	&sensor_dev_attr_temp2_max.dev_attr.attr,
 	&sensor_dev_attr_temp2_crit.dev_attr.attr,
@@ -495,7 +629,8 @@ static struct attribute *nct7802_temp_attrs[] = {
 	&sensor_dev_attr_temp2_fault.dev_attr.attr,
 	&sensor_dev_attr_temp2_beep.dev_attr.attr,
 
-	&sensor_dev_attr_temp3_input.dev_attr.attr,		/* 18 */
+	&sensor_dev_attr_temp3_type.dev_attr.attr,		/* 20 */
+	&sensor_dev_attr_temp3_input.dev_attr.attr,
 	&sensor_dev_attr_temp3_min.dev_attr.attr,
 	&sensor_dev_attr_temp3_max.dev_attr.attr,
 	&sensor_dev_attr_temp3_crit.dev_attr.attr,
@@ -505,7 +640,7 @@ static struct attribute *nct7802_temp_attrs[] = {
 	&sensor_dev_attr_temp3_fault.dev_attr.attr,
 	&sensor_dev_attr_temp3_beep.dev_attr.attr,
 
-	&sensor_dev_attr_temp4_input.dev_attr.attr,		/* 27 */
+	&sensor_dev_attr_temp4_input.dev_attr.attr,		/* 30 */
 	&sensor_dev_attr_temp4_min.dev_attr.attr,
 	&sensor_dev_attr_temp4_max.dev_attr.attr,
 	&sensor_dev_attr_temp4_crit.dev_attr.attr,
@@ -514,7 +649,7 @@ static struct attribute *nct7802_temp_attrs[] = {
 	&sensor_dev_attr_temp4_crit_alarm.dev_attr.attr,
 	&sensor_dev_attr_temp4_beep.dev_attr.attr,
 
-	&sensor_dev_attr_temp5_input.dev_attr.attr,		/* 35 */
+	&sensor_dev_attr_temp5_input.dev_attr.attr,		/* 38 */
 	&sensor_dev_attr_temp5_min.dev_attr.attr,
 	&sensor_dev_attr_temp5_max.dev_attr.attr,
 	&sensor_dev_attr_temp5_crit.dev_attr.attr,
@@ -523,7 +658,7 @@ static struct attribute *nct7802_temp_attrs[] = {
 	&sensor_dev_attr_temp5_crit_alarm.dev_attr.attr,
 	&sensor_dev_attr_temp5_beep.dev_attr.attr,
 
-	&sensor_dev_attr_temp6_input.dev_attr.attr,		/* 43 */
+	&sensor_dev_attr_temp6_input.dev_attr.attr,		/* 46 */
 	&sensor_dev_attr_temp6_beep.dev_attr.attr,
 
 	NULL
@@ -541,25 +676,27 @@ static umode_t nct7802_temp_is_visible(struct kobject *kobj,
 	if (err < 0)
 		return 0;
 
-	if (index < 9 &&
+	if (index < 10 &&
 	    (reg & 03) != 0x01 && (reg & 0x03) != 0x02)		/* RD1 */
 		return 0;
-	if (index >= 9 && index < 18 &&
+
+	if (index >= 10 && index < 20 &&
 	    (reg & 0x0c) != 0x04 && (reg & 0x0c) != 0x08)	/* RD2 */
 		return 0;
-	if (index >= 18 && index < 27 && (reg & 0x30) != 0x20)	/* RD3 */
+	if (index >= 20 && index < 30 && (reg & 0x30) != 0x20)	/* RD3 */
 		return 0;
-	if (index >= 27 && index < 35)				/* local */
+
+	if (index >= 30 && index < 38)				/* local */
 		return attr->mode;
 
 	err = regmap_read(data->regmap, REG_PECI_ENABLE, &reg);
 	if (err < 0)
 		return 0;
 
-	if (index >= 35 && index < 43 && !(reg & 0x01))		/* PECI 0 */
+	if (index >= 38 && index < 46 && !(reg & 0x01))		/* PECI 0 */
 		return 0;
 
-	if (index >= 0x43 && (!(reg & 0x02)))			/* PECI 1 */
+	if (index >= 0x46 && (!(reg & 0x02)))			/* PECI 1 */
 		return 0;
 
 	return attr->mode;
@@ -687,6 +824,27 @@ static SENSOR_DEVICE_ATTR_2(fan3_alarm, S_IRUGO, show_alarm, NULL, 0x1a, 2);
 static SENSOR_DEVICE_ATTR_2(fan3_beep, S_IRUGO | S_IWUSR, show_beep, store_beep,
 			    0x5b, 2);
 
+/* 7.2.89 Fan Control Output Type */
+static SENSOR_DEVICE_ATTR(pwm1_mode, S_IRUGO, show_pwm_mode, NULL, 0);
+static SENSOR_DEVICE_ATTR(pwm2_mode, S_IRUGO, show_pwm_mode, NULL, 1);
+static SENSOR_DEVICE_ATTR(pwm3_mode, S_IRUGO, show_pwm_mode, NULL, 2);
+
+/* 7.2.91... Fan Control Output Value */
+static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, show_pwm, store_pwm,
+			  REG_PWM(0));
+static SENSOR_DEVICE_ATTR(pwm2, S_IRUGO | S_IWUSR, show_pwm, store_pwm,
+			  REG_PWM(1));
+static SENSOR_DEVICE_ATTR(pwm3, S_IRUGO | S_IWUSR, show_pwm, store_pwm,
+			  REG_PWM(2));
+
+/* 7.2.95... Temperature to Fan mapping Relationships Register */
+static SENSOR_DEVICE_ATTR(pwm1_enable, S_IRUGO | S_IWUSR, show_pwm_enable,
+			  store_pwm_enable, 0);
+static SENSOR_DEVICE_ATTR(pwm2_enable, S_IRUGO | S_IWUSR, show_pwm_enable,
+			  store_pwm_enable, 1);
+static SENSOR_DEVICE_ATTR(pwm3_enable, S_IRUGO | S_IWUSR, show_pwm_enable,
+			  store_pwm_enable, 2);
+
 static struct attribute *nct7802_fan_attrs[] = {
 	&sensor_dev_attr_fan1_input.dev_attr.attr,
 	&sensor_dev_attr_fan1_min.dev_attr.attr,
@@ -725,10 +883,142 @@ static struct attribute_group nct7802_fan_group = {
 	.is_visible = nct7802_fan_is_visible,
 };
 
+static struct attribute *nct7802_pwm_attrs[] = {
+	&sensor_dev_attr_pwm1_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm1_mode.dev_attr.attr,
+	&sensor_dev_attr_pwm1.dev_attr.attr,
+	&sensor_dev_attr_pwm2_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm2_mode.dev_attr.attr,
+	&sensor_dev_attr_pwm2.dev_attr.attr,
+	&sensor_dev_attr_pwm3_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm3_mode.dev_attr.attr,
+	&sensor_dev_attr_pwm3.dev_attr.attr,
+	NULL
+};
+
+static struct attribute_group nct7802_pwm_group = {
+	.attrs = nct7802_pwm_attrs,
+};
+
+/* 7.2.115... 0x80-0x83, 0x84 Temperature (X-axis) transition */
+static SENSOR_DEVICE_ATTR_2(pwm1_auto_point1_temp, S_IRUGO | S_IWUSR,
+			    show_temp, store_temp, 0x80, 0);
+static SENSOR_DEVICE_ATTR_2(pwm1_auto_point2_temp, S_IRUGO | S_IWUSR,
+			    show_temp, store_temp, 0x81, 0);
+static SENSOR_DEVICE_ATTR_2(pwm1_auto_point3_temp, S_IRUGO | S_IWUSR,
+			    show_temp, store_temp, 0x82, 0);
+static SENSOR_DEVICE_ATTR_2(pwm1_auto_point4_temp, S_IRUGO | S_IWUSR,
+			    show_temp, store_temp, 0x83, 0);
+static SENSOR_DEVICE_ATTR_2(pwm1_auto_point5_temp, S_IRUGO | S_IWUSR,
+			    show_temp, store_temp, 0x84, 0);
+
+/* 7.2.120... 0x85-0x88 PWM (Y-axis) transition */
+static SENSOR_DEVICE_ATTR(pwm1_auto_point1_pwm, S_IRUGO | S_IWUSR,
+			  show_pwm, store_pwm, 0x85);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point2_pwm, S_IRUGO | S_IWUSR,
+			  show_pwm, store_pwm, 0x86);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point3_pwm, S_IRUGO | S_IWUSR,
+			  show_pwm, store_pwm, 0x87);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point4_pwm, S_IRUGO | S_IWUSR,
+			  show_pwm, store_pwm, 0x88);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point5_pwm, S_IRUGO, show_pwm, NULL, 0);
+
+/* 7.2.124 Table 2 X-axis Transition Point 1 Register */
+static SENSOR_DEVICE_ATTR_2(pwm2_auto_point1_temp, S_IRUGO | S_IWUSR,
+			    show_temp, store_temp, 0x90, 0);
+static SENSOR_DEVICE_ATTR_2(pwm2_auto_point2_temp, S_IRUGO | S_IWUSR,
+			    show_temp, store_temp, 0x91, 0);
+static SENSOR_DEVICE_ATTR_2(pwm2_auto_point3_temp, S_IRUGO | S_IWUSR,
+			    show_temp, store_temp, 0x92, 0);
+static SENSOR_DEVICE_ATTR_2(pwm2_auto_point4_temp, S_IRUGO | S_IWUSR,
+			    show_temp, store_temp, 0x93, 0);
+static SENSOR_DEVICE_ATTR_2(pwm2_auto_point5_temp, S_IRUGO | S_IWUSR,
+			    show_temp, store_temp, 0x94, 0);
+
+/* 7.2.129 Table 2 Y-axis Transition Point 1 Register */
+static SENSOR_DEVICE_ATTR(pwm2_auto_point1_pwm, S_IRUGO | S_IWUSR,
+			  show_pwm, store_pwm, 0x95);
+static SENSOR_DEVICE_ATTR(pwm2_auto_point2_pwm, S_IRUGO | S_IWUSR,
+			  show_pwm, store_pwm, 0x96);
+static SENSOR_DEVICE_ATTR(pwm2_auto_point3_pwm, S_IRUGO | S_IWUSR,
+			  show_pwm, store_pwm, 0x97);
+static SENSOR_DEVICE_ATTR(pwm2_auto_point4_pwm, S_IRUGO | S_IWUSR,
+			  show_pwm, store_pwm, 0x98);
+static SENSOR_DEVICE_ATTR(pwm2_auto_point5_pwm, S_IRUGO, show_pwm, NULL, 0);
+
+/* 7.2.133 Table 3 X-axis Transition Point 1 Register */
+static SENSOR_DEVICE_ATTR_2(pwm3_auto_point1_temp, S_IRUGO | S_IWUSR,
+			    show_temp, store_temp, 0xA0, 0);
+static SENSOR_DEVICE_ATTR_2(pwm3_auto_point2_temp, S_IRUGO | S_IWUSR,
+			    show_temp, store_temp, 0xA1, 0);
+static SENSOR_DEVICE_ATTR_2(pwm3_auto_point3_temp, S_IRUGO | S_IWUSR,
+			    show_temp, store_temp, 0xA2, 0);
+static SENSOR_DEVICE_ATTR_2(pwm3_auto_point4_temp, S_IRUGO | S_IWUSR,
+			    show_temp, store_temp, 0xA3, 0);
+static SENSOR_DEVICE_ATTR_2(pwm3_auto_point5_temp, S_IRUGO | S_IWUSR,
+			    show_temp, store_temp, 0xA4, 0);
+
+/* 7.2.138 Table 3 Y-axis Transition Point 1 Register */
+static SENSOR_DEVICE_ATTR(pwm3_auto_point1_pwm, S_IRUGO | S_IWUSR,
+			  show_pwm, store_pwm, 0xA5);
+static SENSOR_DEVICE_ATTR(pwm3_auto_point2_pwm, S_IRUGO | S_IWUSR,
+			  show_pwm, store_pwm, 0xA6);
+static SENSOR_DEVICE_ATTR(pwm3_auto_point3_pwm, S_IRUGO | S_IWUSR,
+			  show_pwm, store_pwm, 0xA7);
+static SENSOR_DEVICE_ATTR(pwm3_auto_point4_pwm, S_IRUGO | S_IWUSR,
+			  show_pwm, store_pwm, 0xA8);
+static SENSOR_DEVICE_ATTR(pwm3_auto_point5_pwm, S_IRUGO, show_pwm, NULL, 0);
+
+static struct attribute *nct7802_auto_point_attrs[] = {
+	&sensor_dev_attr_pwm1_auto_point1_temp.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_point2_temp.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_point3_temp.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_point4_temp.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_point5_temp.dev_attr.attr,
+
+	&sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_point3_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_point4_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_point5_pwm.dev_attr.attr,
+
+	&sensor_dev_attr_pwm2_auto_point1_temp.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_point2_temp.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_point3_temp.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_point4_temp.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_point5_temp.dev_attr.attr,
+
+	&sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_point3_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_point4_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_point5_pwm.dev_attr.attr,
+
+	&sensor_dev_attr_pwm3_auto_point1_temp.dev_attr.attr,
+	&sensor_dev_attr_pwm3_auto_point2_temp.dev_attr.attr,
+	&sensor_dev_attr_pwm3_auto_point3_temp.dev_attr.attr,
+	&sensor_dev_attr_pwm3_auto_point4_temp.dev_attr.attr,
+	&sensor_dev_attr_pwm3_auto_point5_temp.dev_attr.attr,
+
+	&sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm3_auto_point3_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm3_auto_point4_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm3_auto_point5_pwm.dev_attr.attr,
+
+	NULL
+};
+
+static struct attribute_group nct7802_auto_point_group = {
+	.attrs = nct7802_auto_point_attrs,
+};
+
 static const struct attribute_group *nct7802_groups[] = {
 	&nct7802_temp_group,
 	&nct7802_in_group,
 	&nct7802_fan_group,
+	&nct7802_pwm_group,
+	&nct7802_auto_point_group,
 	NULL
 };
 
@@ -776,7 +1066,8 @@ static int nct7802_detect(struct i2c_client *client,
 
 static bool nct7802_regmap_is_volatile(struct device *dev, unsigned int reg)
 {
-	return reg != REG_BANK && reg <= 0x20;
+	return (reg != REG_BANK && reg <= 0x20) ||
+		(reg >= REG_PWM(0) && reg <= REG_PWM(2));
 }
 
 static const struct regmap_config nct7802_regmap_config = {
diff --git a/kernel/drivers/hwmon/ntc_thermistor.c b/kernel/drivers/hwmon/ntc_thermistor.c
index 688001158..feed30646 100644
--- a/kernel/drivers/hwmon/ntc_thermistor.c
+++ b/kernel/drivers/hwmon/ntc_thermistor.c
@@ -53,6 +53,7 @@ static const struct platform_device_id ntc_thermistor_id[] = {
 	{ "ncp03wb473", TYPE_NCPXXWB473 },
 	{ "ncp15wl333", TYPE_NCPXXWL333 },
 	{ "b57330v2103", TYPE_B57330V2103},
+	{ "ncp03wf104", TYPE_NCPXXWF104 },
 	{ },
 };
 
@@ -135,6 +136,43 @@ static const struct ntc_compensation ncpXXwl333[] = {
 	{ .temp_c	= 125, .ohm	= 707 },
 };
 
+static const struct ntc_compensation ncpXXwf104[] = {
+	{ .temp_c	= -40, .ohm	= 4397119 },
+	{ .temp_c	= -35, .ohm	= 3088599 },
+	{ .temp_c	= -30, .ohm	= 2197225 },
+	{ .temp_c	= -25, .ohm	= 1581881 },
+	{ .temp_c	= -20, .ohm	= 1151037 },
+	{ .temp_c	= -15, .ohm	= 846579 },
+	{ .temp_c	= -10, .ohm	= 628988 },
+	{ .temp_c	= -5, .ohm	= 471632 },
+	{ .temp_c	= 0, .ohm	= 357012 },
+	{ .temp_c	= 5, .ohm	= 272500 },
+	{ .temp_c	= 10, .ohm	= 209710 },
+	{ .temp_c	= 15, .ohm	= 162651 },
+	{ .temp_c	= 20, .ohm	= 127080 },
+	{ .temp_c	= 25, .ohm	= 100000 },
+	{ .temp_c	= 30, .ohm	= 79222 },
+	{ .temp_c	= 35, .ohm	= 63167 },
+	{ .temp_c	= 40, .ohm	= 50677 },
+	{ .temp_c	= 45, .ohm	= 40904 },
+	{ .temp_c	= 50, .ohm	= 33195 },
+	{ .temp_c	= 55, .ohm	= 27091 },
+	{ .temp_c	= 60, .ohm	= 22224 },
+	{ .temp_c	= 65, .ohm	= 18323 },
+	{ .temp_c	= 70, .ohm	= 15184 },
+	{ .temp_c	= 75, .ohm	= 12635 },
+	{ .temp_c	= 80, .ohm	= 10566 },
+	{ .temp_c	= 85, .ohm	= 8873 },
+	{ .temp_c	= 90, .ohm	= 7481 },
+	{ .temp_c	= 95, .ohm	= 6337 },
+	{ .temp_c	= 100, .ohm	= 5384 },
+	{ .temp_c	= 105, .ohm	= 4594 },
+	{ .temp_c	= 110, .ohm	= 3934 },
+	{ .temp_c	= 115, .ohm	= 3380 },
+	{ .temp_c	= 120, .ohm	= 2916 },
+	{ .temp_c	= 125, .ohm	= 2522 },
+};
+
 /*
  * The following compensation table is from the specification of EPCOS NTC
  * Thermistors Datasheet
@@ -190,20 +228,21 @@ struct ntc_data {
 static int ntc_adc_iio_read(struct ntc_thermistor_platform_data *pdata)
 {
 	struct iio_channel *channel = pdata->chan;
-	s64 result;
-	int val, ret;
+	int raw, uv, ret;
 
-	ret = iio_read_channel_raw(channel, &val);
+	ret = iio_read_channel_raw(channel, &raw);
 	if (ret < 0) {
 		pr_err("read channel() error: %d\n", ret);
 		return ret;
 	}
 
-	/* unit: mV */
-	result = pdata->pullup_uv * (s64) val;
-	result >>= 12;
+	ret = iio_convert_raw_to_processed(channel, raw, &uv, 1000);
+	if (ret < 0) {
+		/* Assume 12 bit ADC with vref at pullup_uv */
+		uv = (pdata->pullup_uv * (s64)raw) >> 12;
+	}
 
-	return (int)result;
+	return uv;
 }
 
 static const struct of_device_id ntc_match[] = {
@@ -219,6 +258,8 @@ static const struct of_device_id ntc_match[] = {
 		.data = &ntc_thermistor_id[4] },
 	{ .compatible = "epcos,b57330v2103",
 		.data = &ntc_thermistor_id[5]},
+	{ .compatible = "murata,ncp03wf104",
+		.data = &ntc_thermistor_id[6] },
 
 	/* Usage of vendor name "ntc" is deprecated */
 	{ .compatible = "ntc,ncp15wb473",
@@ -309,30 +350,27 @@ static inline u64 div64_u64_safe(u64 dividend, u64 divisor)
 static int get_ohm_of_thermistor(struct ntc_data *data, unsigned int uv)
 {
 	struct ntc_thermistor_platform_data *pdata = data->pdata;
-	u64 mv = uv / 1000;
-	u64 pmv = pdata->pullup_uv / 1000;
+	u32 puv = pdata->pullup_uv;
 	u64 n, puo, pdo;
 	puo = pdata->pullup_ohm;
 	pdo = pdata->pulldown_ohm;
 
-	if (mv == 0) {
-		if (pdata->connect == NTC_CONNECTED_POSITIVE)
-			return INT_MAX;
-		return 0;
-	}
-	if (mv >= pmv)
+	if (uv == 0)
+		return (pdata->connect == NTC_CONNECTED_POSITIVE) ?
+			INT_MAX : 0;
+	if (uv >= puv)
 		return (pdata->connect == NTC_CONNECTED_POSITIVE) ?
 			0 : INT_MAX;
 
 	if (pdata->connect == NTC_CONNECTED_POSITIVE && puo == 0)
-		n = div64_u64_safe(pdo * (pmv - mv), mv);
+		n = div_u64(pdo * (puv - uv), uv);
 	else if (pdata->connect == NTC_CONNECTED_GROUND && pdo == 0)
-		n = div64_u64_safe(puo * mv, pmv - mv);
+		n = div_u64(puo * uv, puv - uv);
 	else if (pdata->connect == NTC_CONNECTED_POSITIVE)
-		n = div64_u64_safe(pdo * puo * (pmv - mv),
-				puo * mv - pdo * (pmv - mv));
+		n = div64_u64_safe(pdo * puo * (puv - uv),
+				puo * uv - pdo * (puv - uv));
 	else
-		n = div64_u64_safe(pdo * puo * mv, pdo * (pmv - mv) - puo * mv);
+		n = div64_u64_safe(pdo * puo * uv, pdo * (puv - uv) - puo * uv);
 
 	if (n > INT_MAX)
 		n = INT_MAX;
@@ -439,7 +477,7 @@ static int ntc_thermistor_get_ohm(struct ntc_data *data)
 	return -EINVAL;
 }
 
-static int ntc_read_temp(void *dev, long *temp)
+static int ntc_read_temp(void *dev, int *temp)
 {
 	struct ntc_data *data = dev_get_drvdata(dev);
 	int ohm;
@@ -567,6 +605,10 @@ static int ntc_thermistor_probe(struct platform_device *pdev)
 		data->comp = b57330v2103;
 		data->n_comp = ARRAY_SIZE(b57330v2103);
 		break;
+	case TYPE_NCPXXWF104:
+		data->comp = ncpXXwf104;
+		data->n_comp = ARRAY_SIZE(ncpXXwf104);
+		break;
 	default:
 		dev_err(&pdev->dev, "Unknown device type: %lu(%s)\n",
 				pdev_id->driver_data, pdev_id->name);
diff --git a/kernel/drivers/hwmon/pmbus/Kconfig b/kernel/drivers/hwmon/pmbus/Kconfig
index 9f7dbd189..df6ebb2b8 100644
--- a/kernel/drivers/hwmon/pmbus/Kconfig
+++ b/kernel/drivers/hwmon/pmbus/Kconfig
@@ -20,7 +20,8 @@ config SENSORS_PMBUS
 	help
 	  If you say yes here you get hardware monitoring support for generic
 	  PMBus devices, including but not limited to ADP4000, BMR453, BMR454,
-	  MDT040, NCP4200, NCP4208, PDT003, PDT006, PDT012, UDT020, and TPS40400.
+	  MDT040, NCP4200, NCP4208, PDT003, PDT006, PDT012, TPS40400, TPS544B20,
+	  TPS544B25, TPS544C20, TPS544C25, and UDT020.
 
 	  This driver can also be built as a module. If so, the module will
 	  be called pmbus.
@@ -30,8 +31,8 @@ config SENSORS_ADM1275
 	default n
 	help
 	  If you say yes here you get hardware monitoring support for Analog
-	  Devices ADM1075, ADM1275, and ADM1276 Hot-Swap Controller and Digital
-	  Power Monitors.
+	  Devices ADM1075, ADM1275, ADM1276, ADM1293, and ADM1294 Hot-Swap
+	  Controller and Digital Power Monitors.
 
 	  This driver can also be built as a module. If so, the module will
 	  be called adm1275.
@@ -51,7 +52,8 @@ config SENSORS_LTC2978
 	default n
 	help
 	  If you say yes here you get hardware monitoring support for Linear
-	  Technology LTC2974, LTC2977, LTC2978, LTC3880, LTC3883, and LTM4676.
+	  Technology LTC2974, LTC2975, LTC2977, LTC2978, LTC2980, LTC3880,
+	  LTC3883, LTC3886, LTC3887, LTCM2987, LTM4675, and LTM4676.
 
 	  This driver can also be built as a module. If so, the module will
 	  be called ltc2978.
@@ -73,6 +75,16 @@ config SENSORS_MAX16064
 	  This driver can also be built as a module. If so, the module will
 	  be called max16064.
 
+config SENSORS_MAX20751
+	tristate "Maxim MAX20751"
+	default n
+	help
+	  If you say yes here you get hardware monitoring support for Maxim
+	  MAX20751.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called max20751.
+
 config SENSORS_MAX34440
 	tristate "Maxim MAX34440 and compatibles"
 	default n
diff --git a/kernel/drivers/hwmon/pmbus/Makefile b/kernel/drivers/hwmon/pmbus/Makefile
index 1454293e9..bce046d37 100644
--- a/kernel/drivers/hwmon/pmbus/Makefile
+++ b/kernel/drivers/hwmon/pmbus/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_SENSORS_ADM1275)	+= adm1275.o
 obj-$(CONFIG_SENSORS_LM25066)	+= lm25066.o
 obj-$(CONFIG_SENSORS_LTC2978)	+= ltc2978.o
 obj-$(CONFIG_SENSORS_MAX16064)	+= max16064.o
+obj-$(CONFIG_SENSORS_MAX20751)	+= max20751.o
 obj-$(CONFIG_SENSORS_MAX34440)	+= max34440.o
 obj-$(CONFIG_SENSORS_MAX8688)	+= max8688.o
 obj-$(CONFIG_SENSORS_TPS40422)	+= tps40422.o
diff --git a/kernel/drivers/hwmon/pmbus/adm1275.c b/kernel/drivers/hwmon/pmbus/adm1275.c
index 60aad9570..188af4c89 100644
--- a/kernel/drivers/hwmon/pmbus/adm1275.c
+++ b/kernel/drivers/hwmon/pmbus/adm1275.c
@@ -21,46 +21,120 @@
 #include <linux/err.h>
 #include <linux/slab.h>
 #include <linux/i2c.h>
+#include <linux/bitops.h>
 #include "pmbus.h"
 
-enum chips { adm1075, adm1275, adm1276 };
+enum chips { adm1075, adm1275, adm1276, adm1293, adm1294 };
+
+#define ADM1275_MFR_STATUS_IOUT_WARN2	BIT(0)
+#define ADM1293_MFR_STATUS_VAUX_UV_WARN	BIT(5)
+#define ADM1293_MFR_STATUS_VAUX_OV_WARN	BIT(6)
 
 #define ADM1275_PEAK_IOUT		0xd0
 #define ADM1275_PEAK_VIN		0xd1
 #define ADM1275_PEAK_VOUT		0xd2
 #define ADM1275_PMON_CONFIG		0xd4
 
-#define ADM1275_VIN_VOUT_SELECT		(1 << 6)
-#define ADM1275_VRANGE			(1 << 5)
-#define ADM1075_IRANGE_50		(1 << 4)
-#define ADM1075_IRANGE_25		(1 << 3)
-#define ADM1075_IRANGE_MASK		((1 << 3) | (1 << 4))
+#define ADM1275_VIN_VOUT_SELECT		BIT(6)
+#define ADM1275_VRANGE			BIT(5)
+#define ADM1075_IRANGE_50		BIT(4)
+#define ADM1075_IRANGE_25		BIT(3)
+#define ADM1075_IRANGE_MASK		(BIT(3) | BIT(4))
+
+#define ADM1293_IRANGE_25		0
+#define ADM1293_IRANGE_50		BIT(6)
+#define ADM1293_IRANGE_100		BIT(7)
+#define ADM1293_IRANGE_200		(BIT(6) | BIT(7))
+#define ADM1293_IRANGE_MASK		(BIT(6) | BIT(7))
+
+#define ADM1293_VIN_SEL_012		BIT(2)
+#define ADM1293_VIN_SEL_074		BIT(3)
+#define ADM1293_VIN_SEL_210		(BIT(2) | BIT(3))
+#define ADM1293_VIN_SEL_MASK		(BIT(2) | BIT(3))
+
+#define ADM1293_VAUX_EN			BIT(1)
 
 #define ADM1275_IOUT_WARN2_LIMIT	0xd7
 #define ADM1275_DEVICE_CONFIG		0xd8
 
-#define ADM1275_IOUT_WARN2_SELECT	(1 << 4)
+#define ADM1275_IOUT_WARN2_SELECT	BIT(4)
 
 #define ADM1276_PEAK_PIN		0xda
-
-#define ADM1275_MFR_STATUS_IOUT_WARN2	(1 << 0)
-
 #define ADM1075_READ_VAUX		0xdd
 #define ADM1075_VAUX_OV_WARN_LIMIT	0xde
 #define ADM1075_VAUX_UV_WARN_LIMIT	0xdf
+#define ADM1293_IOUT_MIN		0xe3
+#define ADM1293_PIN_MIN			0xe4
 #define ADM1075_VAUX_STATUS		0xf6
 
-#define ADM1075_VAUX_OV_WARN		(1<<7)
-#define ADM1075_VAUX_UV_WARN		(1<<6)
+#define ADM1075_VAUX_OV_WARN		BIT(7)
+#define ADM1075_VAUX_UV_WARN		BIT(6)
 
 struct adm1275_data {
 	int id;
 	bool have_oc_fault;
+	bool have_uc_fault;
+	bool have_vout;
+	bool have_vaux_status;
+	bool have_mfr_vaux_status;
+	bool have_iout_min;
+	bool have_pin_min;
+	bool have_pin_max;
 	struct pmbus_driver_info info;
 };
 
 #define to_adm1275_data(x)  container_of(x, struct adm1275_data, info)
 
+struct coefficients {
+	s16 m;
+	s16 b;
+	s16 R;
+};
+
+static const struct coefficients adm1075_coefficients[] = {
+	[0] = { 27169, 0, -1 },		/* voltage */
+	[1] = { 806, 20475, -1 },	/* current, irange25 */
+	[2] = { 404, 20475, -1 },	/* current, irange50 */
+	[3] = { 0, -1, 8549 },		/* power, irange25 */
+	[4] = { 0, -1, 4279 },		/* power, irange50 */
+};
+
+static const struct coefficients adm1275_coefficients[] = {
+	[0] = { 19199, 0, -2 },		/* voltage, vrange set */
+	[1] = { 6720, 0, -1 },		/* voltage, vrange not set */
+	[2] = { 807, 20475, -1 },	/* current */
+};
+
+static const struct coefficients adm1276_coefficients[] = {
+	[0] = { 19199, 0, -2 },		/* voltage, vrange set */
+	[1] = { 6720, 0, -1 },		/* voltage, vrange not set */
+	[2] = { 807, 20475, -1 },	/* current */
+	[3] = { 6043, 0, -2 },		/* power, vrange set */
+	[4] = { 2115, 0, -1 },		/* power, vrange not set */
+};
+
+static const struct coefficients adm1293_coefficients[] = {
+	[0] = { 3333, -1, 0 },		/* voltage, vrange 1.2V */
+	[1] = { 5552, -5, -1 },		/* voltage, vrange 7.4V */
+	[2] = { 19604, -50, -2 },	/* voltage, vrange 21V */
+	[3] = { 8000, -100, -2 },	/* current, irange25 */
+	[4] = { 4000, -100, -2 },	/* current, irange50 */
+	[5] = { 20000, -1000, -3 },	/* current, irange100 */
+	[6] = { 10000, -1000, -3 },	/* current, irange200 */
+	[7] = { 10417, 0, -1 },		/* power, 1.2V, irange25 */
+	[8] = { 5208, 0, -1 },		/* power, 1.2V, irange50 */
+	[9] = { 26042, 0, -2 },		/* power, 1.2V, irange100 */
+	[10] = { 13021, 0, -2 },	/* power, 1.2V, irange200 */
+	[11] = { 17351, 0, -2 },	/* power, 7.4V, irange25 */
+	[12] = { 8676, 0, -2 },		/* power, 7.4V, irange50 */
+	[13] = { 4338, 0, -2 },		/* power, 7.4V, irange100 */
+	[14] = { 21689, 0, -3 },	/* power, 7.4V, irange200 */
+	[15] = { 6126, 0, -2 },		/* power, 21V, irange25 */
+	[16] = { 30631, 0, -3 },	/* power, 21V, irange50 */
+	[17] = { 15316, 0, -3 },	/* power, 21V, irange100 */
+	[18] = { 7658, 0, -3 },		/* power, 21V, irange200 */
+};
+
 static int adm1275_read_word_data(struct i2c_client *client, int page, int reg)
 {
 	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
@@ -72,42 +146,37 @@ static int adm1275_read_word_data(struct i2c_client *client, int page, int reg)
 
 	switch (reg) {
 	case PMBUS_IOUT_UC_FAULT_LIMIT:
-		if (data->have_oc_fault) {
-			ret = -ENXIO;
-			break;
-		}
+		if (!data->have_uc_fault)
+			return -ENXIO;
 		ret = pmbus_read_word_data(client, 0, ADM1275_IOUT_WARN2_LIMIT);
 		break;
 	case PMBUS_IOUT_OC_FAULT_LIMIT:
-		if (!data->have_oc_fault) {
-			ret = -ENXIO;
-			break;
-		}
+		if (!data->have_oc_fault)
+			return -ENXIO;
 		ret = pmbus_read_word_data(client, 0, ADM1275_IOUT_WARN2_LIMIT);
 		break;
 	case PMBUS_VOUT_OV_WARN_LIMIT:
-		if (data->id != adm1075) {
-			ret = -ENODATA;
-			break;
-		}
+		if (data->have_vout)
+			return -ENODATA;
 		ret = pmbus_read_word_data(client, 0,
 					   ADM1075_VAUX_OV_WARN_LIMIT);
 		break;
 	case PMBUS_VOUT_UV_WARN_LIMIT:
-		if (data->id != adm1075) {
-			ret = -ENODATA;
-			break;
-		}
+		if (data->have_vout)
+			return -ENODATA;
 		ret = pmbus_read_word_data(client, 0,
 					   ADM1075_VAUX_UV_WARN_LIMIT);
 		break;
 	case PMBUS_READ_VOUT:
-		if (data->id != adm1075) {
-			ret = -ENODATA;
-			break;
-		}
+		if (data->have_vout)
+			return -ENODATA;
 		ret = pmbus_read_word_data(client, 0, ADM1075_READ_VAUX);
 		break;
+	case PMBUS_VIRT_READ_IOUT_MIN:
+		if (!data->have_iout_min)
+			return -ENXIO;
+		ret = pmbus_read_word_data(client, 0, ADM1293_IOUT_MIN);
+		break;
 	case PMBUS_VIRT_READ_IOUT_MAX:
 		ret = pmbus_read_word_data(client, 0, ADM1275_PEAK_IOUT);
 		break;
@@ -117,11 +186,14 @@ static int adm1275_read_word_data(struct i2c_client *client, int page, int reg)
 	case PMBUS_VIRT_READ_VIN_MAX:
 		ret = pmbus_read_word_data(client, 0, ADM1275_PEAK_VIN);
 		break;
+	case PMBUS_VIRT_READ_PIN_MIN:
+		if (!data->have_pin_min)
+			return -ENXIO;
+		ret = pmbus_read_word_data(client, 0, ADM1293_PIN_MIN);
+		break;
 	case PMBUS_VIRT_READ_PIN_MAX:
-		if (data->id == adm1275) {
-			ret = -ENXIO;
-			break;
-		}
+		if (!data->have_pin_max)
+			return -ENXIO;
 		ret = pmbus_read_word_data(client, 0, ADM1276_PEAK_PIN);
 		break;
 	case PMBUS_VIRT_RESET_IOUT_HISTORY:
@@ -129,8 +201,8 @@ static int adm1275_read_word_data(struct i2c_client *client, int page, int reg)
 	case PMBUS_VIRT_RESET_VIN_HISTORY:
 		break;
 	case PMBUS_VIRT_RESET_PIN_HISTORY:
-		if (data->id == adm1275)
-			ret = -ENXIO;
+		if (!data->have_pin_max)
+			return -ENXIO;
 		break;
 	default:
 		ret = -ENODATA;
@@ -142,6 +214,8 @@ static int adm1275_read_word_data(struct i2c_client *client, int page, int reg)
 static int adm1275_write_word_data(struct i2c_client *client, int page, int reg,
 				   u16 word)
 {
+	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+	const struct adm1275_data *data = to_adm1275_data(info);
 	int ret;
 
 	if (page)
@@ -155,6 +229,9 @@ static int adm1275_write_word_data(struct i2c_client *client, int page, int reg,
 		break;
 	case PMBUS_VIRT_RESET_IOUT_HISTORY:
 		ret = pmbus_write_word_data(client, 0, ADM1275_PEAK_IOUT, 0);
+		if (!ret && data->have_iout_min)
+			ret = pmbus_write_word_data(client, 0,
+						    ADM1293_IOUT_MIN, 0);
 		break;
 	case PMBUS_VIRT_RESET_VOUT_HISTORY:
 		ret = pmbus_write_word_data(client, 0, ADM1275_PEAK_VOUT, 0);
@@ -164,6 +241,9 @@ static int adm1275_write_word_data(struct i2c_client *client, int page, int reg,
 		break;
 	case PMBUS_VIRT_RESET_PIN_HISTORY:
 		ret = pmbus_write_word_data(client, 0, ADM1276_PEAK_PIN, 0);
+		if (!ret && data->have_pin_min)
+			ret = pmbus_write_word_data(client, 0,
+						    ADM1293_PIN_MIN, 0);
 		break;
 	default:
 		ret = -ENODATA;
@@ -186,29 +266,40 @@ static int adm1275_read_byte_data(struct i2c_client *client, int page, int reg)
 		ret = pmbus_read_byte_data(client, page, PMBUS_STATUS_IOUT);
 		if (ret < 0)
 			break;
+		if (!data->have_oc_fault && !data->have_uc_fault)
+			break;
 		mfr_status = pmbus_read_byte_data(client, page,
 						  PMBUS_STATUS_MFR_SPECIFIC);
-		if (mfr_status < 0) {
-			ret = mfr_status;
-			break;
-		}
+		if (mfr_status < 0)
+			return mfr_status;
 		if (mfr_status & ADM1275_MFR_STATUS_IOUT_WARN2) {
 			ret |= data->have_oc_fault ?
 			  PB_IOUT_OC_FAULT : PB_IOUT_UC_FAULT;
 		}
 		break;
 	case PMBUS_STATUS_VOUT:
-		if (data->id != adm1075) {
-			ret = -ENODATA;
-			break;
-		}
+		if (data->have_vout)
+			return -ENODATA;
 		ret = 0;
-		mfr_status = pmbus_read_byte_data(client, 0,
-						  ADM1075_VAUX_STATUS);
-		if (mfr_status & ADM1075_VAUX_OV_WARN)
-			ret |= PB_VOLTAGE_OV_WARNING;
-		if (mfr_status & ADM1075_VAUX_UV_WARN)
-			ret |= PB_VOLTAGE_UV_WARNING;
+		if (data->have_vaux_status) {
+			mfr_status = pmbus_read_byte_data(client, 0,
+							  ADM1075_VAUX_STATUS);
+			if (mfr_status < 0)
+				return mfr_status;
+			if (mfr_status & ADM1075_VAUX_OV_WARN)
+				ret |= PB_VOLTAGE_OV_WARNING;
+			if (mfr_status & ADM1075_VAUX_UV_WARN)
+				ret |= PB_VOLTAGE_UV_WARNING;
+		} else if (data->have_mfr_vaux_status) {
+			mfr_status = pmbus_read_byte_data(client, page,
+						PMBUS_STATUS_MFR_SPECIFIC);
+			if (mfr_status < 0)
+				return mfr_status;
+			if (mfr_status & ADM1293_MFR_STATUS_VAUX_OV_WARN)
+				ret |= PB_VOLTAGE_OV_WARNING;
+			if (mfr_status & ADM1293_MFR_STATUS_VAUX_UV_WARN)
+				ret |= PB_VOLTAGE_UV_WARNING;
+		}
 		break;
 	default:
 		ret = -ENODATA;
@@ -221,6 +312,8 @@ static const struct i2c_device_id adm1275_id[] = {
 	{ "adm1075", adm1075 },
 	{ "adm1275", adm1275 },
 	{ "adm1276", adm1276 },
+	{ "adm1293", adm1293 },
+	{ "adm1294", adm1294 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, adm1275_id);
@@ -234,6 +327,8 @@ static int adm1275_probe(struct i2c_client *client,
 	struct pmbus_driver_info *info;
 	struct adm1275_data *data;
 	const struct i2c_device_id *mid;
+	const struct coefficients *coefficients;
+	int vindex = -1, voindex = -1, cindex = -1, pindex = -1;
 
 	if (!i2c_check_functionality(client->adapter,
 				     I2C_FUNC_SMBUS_READ_BYTE_DATA
@@ -290,61 +385,38 @@ static int adm1275_probe(struct i2c_client *client,
 	info->format[PSC_VOLTAGE_IN] = direct;
 	info->format[PSC_VOLTAGE_OUT] = direct;
 	info->format[PSC_CURRENT_OUT] = direct;
-	info->m[PSC_CURRENT_OUT] = 807;
-	info->b[PSC_CURRENT_OUT] = 20475;
-	info->R[PSC_CURRENT_OUT] = -1;
+	info->format[PSC_POWER] = direct;
 	info->func[0] = PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT;
 
 	info->read_word_data = adm1275_read_word_data;
 	info->read_byte_data = adm1275_read_byte_data;
 	info->write_word_data = adm1275_write_word_data;
 
-	if (data->id == adm1075) {
-		info->m[PSC_VOLTAGE_IN] = 27169;
-		info->b[PSC_VOLTAGE_IN] = 0;
-		info->R[PSC_VOLTAGE_IN] = -1;
-		info->m[PSC_VOLTAGE_OUT] = 27169;
-		info->b[PSC_VOLTAGE_OUT] = 0;
-		info->R[PSC_VOLTAGE_OUT] = -1;
-	} else if (config & ADM1275_VRANGE) {
-		info->m[PSC_VOLTAGE_IN] = 19199;
-		info->b[PSC_VOLTAGE_IN] = 0;
-		info->R[PSC_VOLTAGE_IN] = -2;
-		info->m[PSC_VOLTAGE_OUT] = 19199;
-		info->b[PSC_VOLTAGE_OUT] = 0;
-		info->R[PSC_VOLTAGE_OUT] = -2;
-	} else {
-		info->m[PSC_VOLTAGE_IN] = 6720;
-		info->b[PSC_VOLTAGE_IN] = 0;
-		info->R[PSC_VOLTAGE_IN] = -1;
-		info->m[PSC_VOLTAGE_OUT] = 6720;
-		info->b[PSC_VOLTAGE_OUT] = 0;
-		info->R[PSC_VOLTAGE_OUT] = -1;
-	}
-
-	if (device_config & ADM1275_IOUT_WARN2_SELECT)
-		data->have_oc_fault = true;
-
 	switch (data->id) {
 	case adm1075:
-		info->format[PSC_POWER] = direct;
-		info->b[PSC_POWER] = 0;
-		info->R[PSC_POWER] = -1;
+		if (device_config & ADM1275_IOUT_WARN2_SELECT)
+			data->have_oc_fault = true;
+		else
+			data->have_uc_fault = true;
+		data->have_pin_max = true;
+		data->have_vaux_status = true;
+
+		coefficients = adm1075_coefficients;
+		vindex = 0;
 		switch (config & ADM1075_IRANGE_MASK) {
 		case ADM1075_IRANGE_25:
-			info->m[PSC_POWER] = 8549;
-			info->m[PSC_CURRENT_OUT] = 806;
+			cindex = 1;
+			pindex = 3;
 			break;
 		case ADM1075_IRANGE_50:
-			info->m[PSC_POWER] = 4279;
-			info->m[PSC_CURRENT_OUT] = 404;
+			cindex = 2;
+			pindex = 4;
 			break;
 		default:
 			dev_err(&client->dev, "Invalid input current range");
-			info->m[PSC_POWER] = 0;
-			info->m[PSC_CURRENT_OUT] = 0;
 			break;
 		}
+
 		info->func[0] |= PMBUS_HAVE_VIN | PMBUS_HAVE_PIN
 		  | PMBUS_HAVE_STATUS_INPUT;
 		if (config & ADM1275_VIN_VOUT_SELECT)
@@ -352,6 +424,16 @@ static int adm1275_probe(struct i2c_client *client,
 			  PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
 		break;
 	case adm1275:
+		if (device_config & ADM1275_IOUT_WARN2_SELECT)
+			data->have_oc_fault = true;
+		else
+			data->have_uc_fault = true;
+		data->have_vout = true;
+
+		coefficients = adm1275_coefficients;
+		vindex = (config & ADM1275_VRANGE) ? 0 : 1;
+		cindex = 2;
+
 		if (config & ADM1275_VIN_VOUT_SELECT)
 			info->func[0] |=
 			  PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
@@ -360,22 +442,100 @@ static int adm1275_probe(struct i2c_client *client,
 			  PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT;
 		break;
 	case adm1276:
-		info->format[PSC_POWER] = direct;
+		if (device_config & ADM1275_IOUT_WARN2_SELECT)
+			data->have_oc_fault = true;
+		else
+			data->have_uc_fault = true;
+		data->have_vout = true;
+		data->have_pin_max = true;
+
+		coefficients = adm1276_coefficients;
+		vindex = (config & ADM1275_VRANGE) ? 0 : 1;
+		cindex = 2;
+		pindex = (config & ADM1275_VRANGE) ? 3 : 4;
+
 		info->func[0] |= PMBUS_HAVE_VIN | PMBUS_HAVE_PIN
 		  | PMBUS_HAVE_STATUS_INPUT;
 		if (config & ADM1275_VIN_VOUT_SELECT)
 			info->func[0] |=
 			  PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
-		if (config & ADM1275_VRANGE) {
-			info->m[PSC_POWER] = 6043;
-			info->b[PSC_POWER] = 0;
-			info->R[PSC_POWER] = -2;
-		} else {
-			info->m[PSC_POWER] = 2115;
-			info->b[PSC_POWER] = 0;
-			info->R[PSC_POWER] = -1;
+		break;
+	case adm1293:
+	case adm1294:
+		data->have_iout_min = true;
+		data->have_pin_min = true;
+		data->have_pin_max = true;
+		data->have_mfr_vaux_status = true;
+
+		coefficients = adm1293_coefficients;
+
+		voindex = 0;
+		switch (config & ADM1293_VIN_SEL_MASK) {
+		case ADM1293_VIN_SEL_012:	/* 1.2V */
+			vindex = 0;
+			break;
+		case ADM1293_VIN_SEL_074:	/* 7.4V */
+			vindex = 1;
+			break;
+		case ADM1293_VIN_SEL_210:	/* 21V */
+			vindex = 2;
+			break;
+		default:			/* disabled */
+			break;
 		}
+
+		switch (config & ADM1293_IRANGE_MASK) {
+		case ADM1293_IRANGE_25:
+			cindex = 3;
+			break;
+		case ADM1293_IRANGE_50:
+			cindex = 4;
+			break;
+		case ADM1293_IRANGE_100:
+			cindex = 5;
+			break;
+		case ADM1293_IRANGE_200:
+			cindex = 6;
+			break;
+		}
+
+		if (vindex >= 0)
+			pindex = 7 + vindex * 4 + (cindex - 3);
+
+		if (config & ADM1293_VAUX_EN)
+			info->func[0] |=
+				PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
+
+		info->func[0] |= PMBUS_HAVE_PIN |
+			PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT;
+
 		break;
+	default:
+		dev_err(&client->dev, "Unsupported device\n");
+		return -ENODEV;
+	}
+
+	if (voindex < 0)
+		voindex = vindex;
+	if (vindex >= 0) {
+		info->m[PSC_VOLTAGE_IN] = coefficients[vindex].m;
+		info->b[PSC_VOLTAGE_IN] = coefficients[vindex].b;
+		info->R[PSC_VOLTAGE_IN] = coefficients[vindex].R;
+	}
+	if (voindex >= 0) {
+		info->m[PSC_VOLTAGE_OUT] = coefficients[voindex].m;
+		info->b[PSC_VOLTAGE_OUT] = coefficients[voindex].b;
+		info->R[PSC_VOLTAGE_OUT] = coefficients[voindex].R;
+	}
+	if (cindex >= 0) {
+		info->m[PSC_CURRENT_OUT] = coefficients[cindex].m;
+		info->b[PSC_CURRENT_OUT] = coefficients[cindex].b;
+		info->R[PSC_CURRENT_OUT] = coefficients[cindex].R;
+	}
+	if (pindex >= 0) {
+		info->m[PSC_POWER] = coefficients[pindex].m;
+		info->b[PSC_POWER] = coefficients[pindex].b;
+		info->R[PSC_POWER] = coefficients[pindex].R;
 	}
 
 	return pmbus_do_probe(client, id, info);
diff --git a/kernel/drivers/hwmon/pmbus/lm25066.c b/kernel/drivers/hwmon/pmbus/lm25066.c
index a26b1d1d9..a3d912cd3 100644
--- a/kernel/drivers/hwmon/pmbus/lm25066.c
+++ b/kernel/drivers/hwmon/pmbus/lm25066.c
@@ -19,6 +19,7 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#include <linux/bitops.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
@@ -42,15 +43,15 @@ enum chips { lm25056, lm25063, lm25066, lm5064, lm5066 };
 #define LM25066_READ_AVG_IIN		0xde
 #define LM25066_READ_AVG_PIN		0xdf
 
-#define LM25066_DEV_SETUP_CL		(1 << 4)	/* Current limit */
+#define LM25066_DEV_SETUP_CL		BIT(4)	/* Current limit */
 
 /* LM25056 only */
 
 #define LM25056_VAUX_OV_WARN_LIMIT	0xe3
 #define LM25056_VAUX_UV_WARN_LIMIT	0xe4
 
-#define LM25056_MFR_STS_VAUX_OV_WARN	(1 << 1)
-#define LM25056_MFR_STS_VAUX_UV_WARN	(1 << 0)
+#define LM25056_MFR_STS_VAUX_OV_WARN	BIT(1)
+#define LM25056_MFR_STS_VAUX_UV_WARN	BIT(0)
 
 /* LM25063 only */
 
diff --git a/kernel/drivers/hwmon/pmbus/ltc2978.c b/kernel/drivers/hwmon/pmbus/ltc2978.c
index 0835050ec..58b789c28 100644
--- a/kernel/drivers/hwmon/pmbus/ltc2978.c
+++ b/kernel/drivers/hwmon/pmbus/ltc2978.c
@@ -1,9 +1,9 @@
 /*
- * Hardware monitoring driver for LTC2974, LTC2977, LTC2978, LTC3880,
- * LTC3883, and LTM4676
+ * Hardware monitoring driver for LTC2978 and compatible chips.
  *
  * Copyright (c) 2011 Ericsson AB.
- * Copyright (c) 2013, 2014 Guenter Roeck
+ * Copyright (c) 2013, 2014, 2015 Guenter Roeck
+ * Copyright (c) 2015 Linear Technology
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -16,6 +16,8 @@
  * GNU General Public License for more details.
  */
 
+#include <linux/delay.h>
+#include <linux/jiffies.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
@@ -25,49 +27,71 @@
 #include <linux/regulator/driver.h>
 #include "pmbus.h"
 
-enum chips { ltc2974, ltc2977, ltc2978, ltc3880, ltc3883, ltm4676 };
+enum chips { ltc2974, ltc2975, ltc2977, ltc2978, ltc2980, ltc3880, ltc3882,
+	ltc3883, ltc3886, ltc3887, ltm2987, ltm4675, ltm4676 };
 
 /* Common for all chips */
 #define LTC2978_MFR_VOUT_PEAK		0xdd
 #define LTC2978_MFR_VIN_PEAK		0xde
 #define LTC2978_MFR_TEMPERATURE_PEAK	0xdf
-#define LTC2978_MFR_SPECIAL_ID		0xe7
+#define LTC2978_MFR_SPECIAL_ID		0xe7	/* Undocumented on LTC3882 */
+#define LTC2978_MFR_COMMON		0xef
 
-/* LTC2974, LCT2977, and LTC2978 */
+/* LTC2974, LTC2975, LCT2977, LTC2980, LTC2978, and LTM2987 */
 #define LTC2978_MFR_VOUT_MIN		0xfb
 #define LTC2978_MFR_VIN_MIN		0xfc
 #define LTC2978_MFR_TEMPERATURE_MIN	0xfd
 
-/* LTC2974 only */
+/* LTC2974, LTC2975 */
 #define LTC2974_MFR_IOUT_PEAK		0xd7
 #define LTC2974_MFR_IOUT_MIN		0xd8
 
-/* LTC3880, LTC3883, and LTM4676 */
+/* LTC3880, LTC3882, LTC3883, LTC3887, LTM4675, and LTM4676 */
 #define LTC3880_MFR_IOUT_PEAK		0xd7
 #define LTC3880_MFR_CLEAR_PEAKS		0xe3
 #define LTC3880_MFR_TEMPERATURE2_PEAK	0xf4
 
-/* LTC3883 only */
+/* LTC3883 and LTC3886 only */
 #define LTC3883_MFR_IIN_PEAK		0xe1
 
-#define LTC2974_ID_REV1			0x0212
-#define LTC2974_ID_REV2			0x0213
+/* LTC2975 only */
+#define LTC2975_MFR_IIN_PEAK		0xc4
+#define LTC2975_MFR_IIN_MIN		0xc5
+#define LTC2975_MFR_PIN_PEAK		0xc6
+#define LTC2975_MFR_PIN_MIN		0xc7
+
+#define LTC2978_ID_MASK			0xfff0
+
+#define LTC2974_ID			0x0210
+#define LTC2975_ID			0x0220
 #define LTC2977_ID			0x0130
-#define LTC2978_ID_REV1			0x0121
-#define LTC2978_ID_REV2			0x0122
-#define LTC2978A_ID			0x0124
-#define LTC3880_ID			0x4000
-#define LTC3880_ID_MASK			0xff00
+#define LTC2978_ID_REV1			0x0110	/* Early revision */
+#define LTC2978_ID_REV2			0x0120
+#define LTC2980_ID_A			0x8030	/* A/B for two die IDs */
+#define LTC2980_ID_B			0x8040
+#define LTC3880_ID			0x4020
+#define LTC3882_ID			0x4200
+#define LTC3882_ID_D1			0x4240	/* Dash 1 */
 #define LTC3883_ID			0x4300
-#define LTC3883_ID_MASK			0xff00
-#define LTM4676_ID			0x4480	/* datasheet claims 0x440X */
-#define LTM4676_ID_MASK			0xfff0
+#define LTC3886_ID			0x4600
+#define LTC3887_ID			0x4700
+#define LTM2987_ID_A			0x8010	/* A/B for two die IDs */
+#define LTM2987_ID_B			0x8020
+#define LTM4675_ID			0x47a0
+#define LTM4676_ID_REV1			0x4400
+#define LTM4676_ID_REV2			0x4480
+#define LTM4676A_ID			0x47e0
 
 #define LTC2974_NUM_PAGES		4
 #define LTC2978_NUM_PAGES		8
 #define LTC3880_NUM_PAGES		2
 #define LTC3883_NUM_PAGES		1
 
+#define LTC_POLL_TIMEOUT		100	/* in milli-seconds */
+
+#define LTC_NOT_BUSY			BIT(5)
+#define LTC_NOT_PENDING			BIT(4)
+
 /*
  * LTC2978 clears peak data whenever the CLEAR_FAULTS command is executed, which
  * happens pretty much each time chip data is updated. Raw peak data therefore
@@ -82,13 +106,91 @@ struct ltc2978_data {
 	u16 temp_min[LTC2974_NUM_PAGES], temp_max[LTC2974_NUM_PAGES];
 	u16 vout_min[LTC2978_NUM_PAGES], vout_max[LTC2978_NUM_PAGES];
 	u16 iout_min[LTC2974_NUM_PAGES], iout_max[LTC2974_NUM_PAGES];
-	u16 iin_max;
+	u16 iin_min, iin_max;
+	u16 pin_min, pin_max;
 	u16 temp2_max;
 	struct pmbus_driver_info info;
+	u32 features;
 };
-
 #define to_ltc2978_data(x)  container_of(x, struct ltc2978_data, info)
 
+#define FEAT_CLEAR_PEAKS	BIT(0)
+#define FEAT_NEEDS_POLLING	BIT(1)
+
+#define has_clear_peaks(d)	((d)->features & FEAT_CLEAR_PEAKS)
+#define needs_polling(d)	((d)->features & FEAT_NEEDS_POLLING)
+
+static int ltc_wait_ready(struct i2c_client *client)
+{
+	unsigned long timeout = jiffies + msecs_to_jiffies(LTC_POLL_TIMEOUT);
+	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+	struct ltc2978_data *data = to_ltc2978_data(info);
+	int status;
+	u8 mask;
+
+	if (!needs_polling(data))
+		return 0;
+
+	/*
+	 * LTC3883 does not support LTC_NOT_PENDING, even though
+	 * the datasheet claims that it does.
+	 */
+	mask = LTC_NOT_BUSY;
+	if (data->id != ltc3883)
+		mask |= LTC_NOT_PENDING;
+
+	do {
+		status = pmbus_read_byte_data(client, 0, LTC2978_MFR_COMMON);
+		if (status == -EBADMSG || status == -ENXIO) {
+			/* PEC error or NACK: chip may be busy, try again */
+			usleep_range(50, 100);
+			continue;
+		}
+		if (status < 0)
+			return status;
+
+		if ((status & mask) == mask)
+			return 0;
+
+		usleep_range(50, 100);
+	} while (time_before(jiffies, timeout));
+
+	return -ETIMEDOUT;
+}
+
+static int ltc_read_word_data(struct i2c_client *client, int page, int reg)
+{
+	int ret;
+
+	ret = ltc_wait_ready(client);
+	if (ret < 0)
+		return ret;
+
+	return pmbus_read_word_data(client, page, reg);
+}
+
+static int ltc_read_byte_data(struct i2c_client *client, int page, int reg)
+{
+	int ret;
+
+	ret = ltc_wait_ready(client);
+	if (ret < 0)
+		return ret;
+
+	return pmbus_read_byte_data(client, page, reg);
+}
+
+static int ltc_write_byte(struct i2c_client *client, int page, u8 byte)
+{
+	int ret;
+
+	ret = ltc_wait_ready(client);
+	if (ret < 0)
+		return ret;
+
+	return pmbus_write_byte(client, page, byte);
+}
+
 static inline int lin11_to_val(int data)
 {
 	s16 e = ((s16)data) >> 11;
@@ -102,6 +204,34 @@ static inline int lin11_to_val(int data)
 	return (e < 0 ? m >> -e : m << e);
 }
 
+static int ltc_get_max(struct ltc2978_data *data, struct i2c_client *client,
+		       int page, int reg, u16 *pmax)
+{
+	int ret;
+
+	ret = ltc_read_word_data(client, page, reg);
+	if (ret >= 0) {
+		if (lin11_to_val(ret) > lin11_to_val(*pmax))
+			*pmax = ret;
+		ret = *pmax;
+	}
+	return ret;
+}
+
+static int ltc_get_min(struct ltc2978_data *data, struct i2c_client *client,
+		       int page, int reg, u16 *pmin)
+{
+	int ret;
+
+	ret = ltc_read_word_data(client, page, reg);
+	if (ret >= 0) {
+		if (lin11_to_val(ret) < lin11_to_val(*pmin))
+			*pmin = ret;
+		ret = *pmin;
+	}
+	return ret;
+}
+
 static int ltc2978_read_word_data_common(struct i2c_client *client, int page,
 					 int reg)
 {
@@ -111,15 +241,11 @@ static int ltc2978_read_word_data_common(struct i2c_client *client, int page,
 
 	switch (reg) {
 	case PMBUS_VIRT_READ_VIN_MAX:
-		ret = pmbus_read_word_data(client, page, LTC2978_MFR_VIN_PEAK);
-		if (ret >= 0) {
-			if (lin11_to_val(ret) > lin11_to_val(data->vin_max))
-				data->vin_max = ret;
-			ret = data->vin_max;
-		}
+		ret = ltc_get_max(data, client, page, LTC2978_MFR_VIN_PEAK,
+				  &data->vin_max);
 		break;
 	case PMBUS_VIRT_READ_VOUT_MAX:
-		ret = pmbus_read_word_data(client, page, LTC2978_MFR_VOUT_PEAK);
+		ret = ltc_read_word_data(client, page, LTC2978_MFR_VOUT_PEAK);
 		if (ret >= 0) {
 			/*
 			 * VOUT is 16 bit unsigned with fixed exponent,
@@ -131,14 +257,9 @@ static int ltc2978_read_word_data_common(struct i2c_client *client, int page,
 		}
 		break;
 	case PMBUS_VIRT_READ_TEMP_MAX:
-		ret = pmbus_read_word_data(client, page,
-					   LTC2978_MFR_TEMPERATURE_PEAK);
-		if (ret >= 0) {
-			if (lin11_to_val(ret)
-			    > lin11_to_val(data->temp_max[page]))
-				data->temp_max[page] = ret;
-			ret = data->temp_max[page];
-		}
+		ret = ltc_get_max(data, client, page,
+				  LTC2978_MFR_TEMPERATURE_PEAK,
+				  &data->temp_max[page]);
 		break;
 	case PMBUS_VIRT_RESET_VOUT_HISTORY:
 	case PMBUS_VIRT_RESET_VIN_HISTORY:
@@ -146,6 +267,9 @@ static int ltc2978_read_word_data_common(struct i2c_client *client, int page,
 		ret = 0;
 		break;
 	default:
+		ret = ltc_wait_ready(client);
+		if (ret < 0)
+			return ret;
 		ret = -ENODATA;
 		break;
 	}
@@ -160,15 +284,11 @@ static int ltc2978_read_word_data(struct i2c_client *client, int page, int reg)
 
 	switch (reg) {
 	case PMBUS_VIRT_READ_VIN_MIN:
-		ret = pmbus_read_word_data(client, page, LTC2978_MFR_VIN_MIN);
-		if (ret >= 0) {
-			if (lin11_to_val(ret) < lin11_to_val(data->vin_min))
-				data->vin_min = ret;
-			ret = data->vin_min;
-		}
+		ret = ltc_get_min(data, client, page, LTC2978_MFR_VIN_MIN,
+				  &data->vin_min);
 		break;
 	case PMBUS_VIRT_READ_VOUT_MIN:
-		ret = pmbus_read_word_data(client, page, LTC2978_MFR_VOUT_MIN);
+		ret = ltc_read_word_data(client, page, LTC2978_MFR_VOUT_MIN);
 		if (ret >= 0) {
 			/*
 			 * VOUT_MIN is known to not be supported on some lots
@@ -184,14 +304,9 @@ static int ltc2978_read_word_data(struct i2c_client *client, int page, int reg)
 		}
 		break;
 	case PMBUS_VIRT_READ_TEMP_MIN:
-		ret = pmbus_read_word_data(client, page,
-					   LTC2978_MFR_TEMPERATURE_MIN);
-		if (ret >= 0) {
-			if (lin11_to_val(ret)
-			    < lin11_to_val(data->temp_min[page]))
-				data->temp_min[page] = ret;
-			ret = data->temp_min[page];
-		}
+		ret = ltc_get_min(data, client, page,
+				  LTC2978_MFR_TEMPERATURE_MIN,
+				  &data->temp_min[page]);
 		break;
 	case PMBUS_VIRT_READ_IOUT_MAX:
 	case PMBUS_VIRT_RESET_IOUT_HISTORY:
@@ -214,22 +329,12 @@ static int ltc2974_read_word_data(struct i2c_client *client, int page, int reg)
 
 	switch (reg) {
 	case PMBUS_VIRT_READ_IOUT_MAX:
-		ret = pmbus_read_word_data(client, page, LTC2974_MFR_IOUT_PEAK);
-		if (ret >= 0) {
-			if (lin11_to_val(ret)
-			    > lin11_to_val(data->iout_max[page]))
-				data->iout_max[page] = ret;
-			ret = data->iout_max[page];
-		}
+		ret = ltc_get_max(data, client, page, LTC2974_MFR_IOUT_PEAK,
+				  &data->iout_max[page]);
 		break;
 	case PMBUS_VIRT_READ_IOUT_MIN:
-		ret = pmbus_read_word_data(client, page, LTC2974_MFR_IOUT_MIN);
-		if (ret >= 0) {
-			if (lin11_to_val(ret)
-			    < lin11_to_val(data->iout_min[page]))
-				data->iout_min[page] = ret;
-			ret = data->iout_min[page];
-		}
+		ret = ltc_get_min(data, client, page, LTC2974_MFR_IOUT_MIN,
+				  &data->iout_min[page]);
 		break;
 	case PMBUS_VIRT_RESET_IOUT_HISTORY:
 		ret = 0;
@@ -241,6 +346,40 @@ static int ltc2974_read_word_data(struct i2c_client *client, int page, int reg)
 	return ret;
 }
 
+static int ltc2975_read_word_data(struct i2c_client *client, int page, int reg)
+{
+	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+	struct ltc2978_data *data = to_ltc2978_data(info);
+	int ret;
+
+	switch (reg) {
+	case PMBUS_VIRT_READ_IIN_MAX:
+		ret = ltc_get_max(data, client, page, LTC2975_MFR_IIN_PEAK,
+				  &data->iin_max);
+		break;
+	case PMBUS_VIRT_READ_IIN_MIN:
+		ret = ltc_get_min(data, client, page, LTC2975_MFR_IIN_MIN,
+				  &data->iin_min);
+		break;
+	case PMBUS_VIRT_READ_PIN_MAX:
+		ret = ltc_get_max(data, client, page, LTC2975_MFR_PIN_PEAK,
+				  &data->pin_max);
+		break;
+	case PMBUS_VIRT_READ_PIN_MIN:
+		ret = ltc_get_min(data, client, page, LTC2975_MFR_PIN_MIN,
+				  &data->pin_min);
+		break;
+	case PMBUS_VIRT_RESET_IIN_HISTORY:
+	case PMBUS_VIRT_RESET_PIN_HISTORY:
+		ret = 0;
+		break;
+	default:
+		ret = ltc2978_read_word_data(client, page, reg);
+		break;
+	}
+	return ret;
+}
+
 static int ltc3880_read_word_data(struct i2c_client *client, int page, int reg)
 {
 	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
@@ -249,22 +388,13 @@ static int ltc3880_read_word_data(struct i2c_client *client, int page, int reg)
 
 	switch (reg) {
 	case PMBUS_VIRT_READ_IOUT_MAX:
-		ret = pmbus_read_word_data(client, page, LTC3880_MFR_IOUT_PEAK);
-		if (ret >= 0) {
-			if (lin11_to_val(ret)
-			    > lin11_to_val(data->iout_max[page]))
-				data->iout_max[page] = ret;
-			ret = data->iout_max[page];
-		}
+		ret = ltc_get_max(data, client, page, LTC3880_MFR_IOUT_PEAK,
+				  &data->iout_max[page]);
 		break;
 	case PMBUS_VIRT_READ_TEMP2_MAX:
-		ret = pmbus_read_word_data(client, page,
-					   LTC3880_MFR_TEMPERATURE2_PEAK);
-		if (ret >= 0) {
-			if (lin11_to_val(ret) > lin11_to_val(data->temp2_max))
-				data->temp2_max = ret;
-			ret = data->temp2_max;
-		}
+		ret = ltc_get_max(data, client, page,
+				  LTC3880_MFR_TEMPERATURE2_PEAK,
+				  &data->temp2_max);
 		break;
 	case PMBUS_VIRT_READ_VIN_MIN:
 	case PMBUS_VIRT_READ_VOUT_MIN:
@@ -290,13 +420,8 @@ static int ltc3883_read_word_data(struct i2c_client *client, int page, int reg)
 
 	switch (reg) {
 	case PMBUS_VIRT_READ_IIN_MAX:
-		ret = pmbus_read_word_data(client, page, LTC3883_MFR_IIN_PEAK);
-		if (ret >= 0) {
-			if (lin11_to_val(ret)
-			    > lin11_to_val(data->iin_max))
-				data->iin_max = ret;
-			ret = data->iin_max;
-		}
+		ret = ltc_get_max(data, client, page, LTC3883_MFR_IIN_PEAK,
+				  &data->iin_max);
 		break;
 	case PMBUS_VIRT_RESET_IIN_HISTORY:
 		ret = 0;
@@ -308,15 +433,15 @@ static int ltc3883_read_word_data(struct i2c_client *client, int page, int reg)
 	return ret;
 }
 
-static int ltc2978_clear_peaks(struct i2c_client *client, int page,
-			       enum chips id)
+static int ltc2978_clear_peaks(struct ltc2978_data *data,
+			       struct i2c_client *client, int page)
 {
 	int ret;
 
-	if (id == ltc3880 || id == ltc3883)
-		ret = pmbus_write_byte(client, 0, LTC3880_MFR_CLEAR_PEAKS);
+	if (has_clear_peaks(data))
+		ret = ltc_write_byte(client, 0, LTC3880_MFR_CLEAR_PEAKS);
 	else
-		ret = pmbus_write_byte(client, page, PMBUS_CLEAR_FAULTS);
+		ret = ltc_write_byte(client, page, PMBUS_CLEAR_FAULTS);
 
 	return ret;
 }
@@ -331,33 +456,42 @@ static int ltc2978_write_word_data(struct i2c_client *client, int page,
 	switch (reg) {
 	case PMBUS_VIRT_RESET_IIN_HISTORY:
 		data->iin_max = 0x7c00;
-		ret = ltc2978_clear_peaks(client, page, data->id);
+		data->iin_min = 0x7bff;
+		ret = ltc2978_clear_peaks(data, client, 0);
+		break;
+	case PMBUS_VIRT_RESET_PIN_HISTORY:
+		data->pin_max = 0x7c00;
+		data->pin_min = 0x7bff;
+		ret = ltc2978_clear_peaks(data, client, 0);
 		break;
 	case PMBUS_VIRT_RESET_IOUT_HISTORY:
 		data->iout_max[page] = 0x7c00;
 		data->iout_min[page] = 0xfbff;
-		ret = ltc2978_clear_peaks(client, page, data->id);
+		ret = ltc2978_clear_peaks(data, client, page);
 		break;
 	case PMBUS_VIRT_RESET_TEMP2_HISTORY:
 		data->temp2_max = 0x7c00;
-		ret = ltc2978_clear_peaks(client, page, data->id);
+		ret = ltc2978_clear_peaks(data, client, page);
 		break;
 	case PMBUS_VIRT_RESET_VOUT_HISTORY:
 		data->vout_min[page] = 0xffff;
 		data->vout_max[page] = 0;
-		ret = ltc2978_clear_peaks(client, page, data->id);
+		ret = ltc2978_clear_peaks(data, client, page);
 		break;
 	case PMBUS_VIRT_RESET_VIN_HISTORY:
 		data->vin_min = 0x7bff;
 		data->vin_max = 0x7c00;
-		ret = ltc2978_clear_peaks(client, page, data->id);
+		ret = ltc2978_clear_peaks(data, client, page);
 		break;
 	case PMBUS_VIRT_RESET_TEMP_HISTORY:
 		data->temp_min[page] = 0x7bff;
 		data->temp_max[page] = 0x7c00;
-		ret = ltc2978_clear_peaks(client, page, data->id);
+		ret = ltc2978_clear_peaks(data, client, page);
 		break;
 	default:
+		ret = ltc_wait_ready(client);
+		if (ret < 0)
+			return ret;
 		ret = -ENODATA;
 		break;
 	}
@@ -366,10 +500,17 @@ static int ltc2978_write_word_data(struct i2c_client *client, int page,
 
 static const struct i2c_device_id ltc2978_id[] = {
 	{"ltc2974", ltc2974},
+	{"ltc2975", ltc2975},
 	{"ltc2977", ltc2977},
 	{"ltc2978", ltc2978},
+	{"ltc2980", ltc2980},
 	{"ltc3880", ltc3880},
+	{"ltc3882", ltc3882},
 	{"ltc3883", ltc3883},
+	{"ltc3886", ltc3886},
+	{"ltc3887", ltc3887},
+	{"ltm2987", ltm2987},
+	{"ltm4675", ltm4675},
 	{"ltm4676", ltm4676},
 	{}
 };
@@ -388,10 +529,74 @@ static const struct regulator_desc ltc2978_reg_desc[] = {
 };
 #endif /* CONFIG_SENSORS_LTC2978_REGULATOR */
 
+static int ltc2978_get_id(struct i2c_client *client)
+{
+	int chip_id;
+
+	chip_id = i2c_smbus_read_word_data(client, LTC2978_MFR_SPECIAL_ID);
+	if (chip_id < 0) {
+		const struct i2c_device_id *id;
+		u8 buf[I2C_SMBUS_BLOCK_MAX];
+		int ret;
+
+		if (!i2c_check_functionality(client->adapter,
+					     I2C_FUNC_SMBUS_READ_BLOCK_DATA))
+			return -ENODEV;
+
+		ret = i2c_smbus_read_block_data(client, PMBUS_MFR_ID, buf);
+		if (ret < 0)
+			return ret;
+		if (ret < 3 || strncmp(buf, "LTC", 3))
+			return -ENODEV;
+
+		ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, buf);
+		if (ret < 0)
+			return ret;
+		for (id = &ltc2978_id[0]; strlen(id->name); id++) {
+			if (!strncasecmp(id->name, buf, strlen(id->name)))
+				return (int)id->driver_data;
+		}
+		return -ENODEV;
+	}
+
+	chip_id &= LTC2978_ID_MASK;
+
+	if (chip_id == LTC2974_ID)
+		return ltc2974;
+	else if (chip_id == LTC2975_ID)
+		return ltc2975;
+	else if (chip_id == LTC2977_ID)
+		return ltc2977;
+	else if (chip_id == LTC2978_ID_REV1 || chip_id == LTC2978_ID_REV2)
+		return ltc2978;
+	else if (chip_id == LTC2980_ID_A || chip_id == LTC2980_ID_B)
+		return ltc2980;
+	else if (chip_id == LTC3880_ID)
+		return ltc3880;
+	else if (chip_id == LTC3882_ID || chip_id == LTC3882_ID_D1)
+		return ltc3882;
+	else if (chip_id == LTC3883_ID)
+		return ltc3883;
+	else if (chip_id == LTC3886_ID)
+		return ltc3886;
+	else if (chip_id == LTC3887_ID)
+		return ltc3887;
+	else if (chip_id == LTM2987_ID_A || chip_id == LTM2987_ID_B)
+		return ltm2987;
+	else if (chip_id == LTM4675_ID)
+		return ltm4675;
+	else if (chip_id == LTM4676_ID_REV1 || chip_id == LTM4676_ID_REV2 ||
+		 chip_id == LTM4676A_ID)
+		return ltm4676;
+
+	dev_err(&client->dev, "Unsupported chip ID 0x%x\n", chip_id);
+	return -ENODEV;
+}
+
 static int ltc2978_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
-	int chip_id, i;
+	int i, chip_id;
 	struct ltc2978_data *data;
 	struct pmbus_driver_info *info;
 
@@ -404,27 +609,11 @@ static int ltc2978_probe(struct i2c_client *client,
 	if (!data)
 		return -ENOMEM;
 
-	chip_id = i2c_smbus_read_word_data(client, LTC2978_MFR_SPECIAL_ID);
+	chip_id = ltc2978_get_id(client);
 	if (chip_id < 0)
 		return chip_id;
 
-	if (chip_id == LTC2974_ID_REV1 || chip_id == LTC2974_ID_REV2) {
-		data->id = ltc2974;
-	} else if (chip_id == LTC2977_ID) {
-		data->id = ltc2977;
-	} else if (chip_id == LTC2978_ID_REV1 || chip_id == LTC2978_ID_REV2 ||
-		   chip_id == LTC2978A_ID) {
-		data->id = ltc2978;
-	} else if ((chip_id & LTC3880_ID_MASK) == LTC3880_ID) {
-		data->id = ltc3880;
-	} else if ((chip_id & LTC3883_ID_MASK) == LTC3883_ID) {
-		data->id = ltc3883;
-	} else if ((chip_id & LTM4676_ID_MASK) == LTM4676_ID) {
-		data->id = ltm4676;
-	} else {
-		dev_err(&client->dev, "Unsupported chip ID 0x%x\n", chip_id);
-		return -ENODEV;
-	}
+	data->id = chip_id;
 	if (data->id != id->driver_data)
 		dev_warn(&client->dev,
 			 "Device mismatch: Configured %s, detected %s\n",
@@ -433,6 +622,9 @@ static int ltc2978_probe(struct i2c_client *client,
 
 	info = &data->info;
 	info->write_word_data = ltc2978_write_word_data;
+	info->write_byte = ltc_write_byte;
+	info->read_word_data = ltc_read_word_data;
+	info->read_byte_data = ltc_read_byte_data;
 
 	data->vin_min = 0x7bff;
 	data->vin_max = 0x7c00;
@@ -461,8 +653,23 @@ static int ltc2978_probe(struct i2c_client *client,
 			  | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT;
 		}
 		break;
+	case ltc2975:
+		info->read_word_data = ltc2975_read_word_data;
+		info->pages = LTC2974_NUM_PAGES;
+		info->func[0] = PMBUS_HAVE_IIN | PMBUS_HAVE_PIN
+		  | PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT
+		  | PMBUS_HAVE_TEMP2;
+		for (i = 0; i < info->pages; i++) {
+			info->func[i] |= PMBUS_HAVE_VOUT
+			  | PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_POUT
+			  | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP
+			  | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT;
+		}
+		break;
 	case ltc2977:
 	case ltc2978:
+	case ltc2980:
+	case ltm2987:
 		info->read_word_data = ltc2978_read_word_data;
 		info->pages = LTC2978_NUM_PAGES;
 		info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT
@@ -474,7 +681,10 @@ static int ltc2978_probe(struct i2c_client *client,
 		}
 		break;
 	case ltc3880:
+	case ltc3887:
+	case ltm4675:
 	case ltm4676:
+		data->features |= FEAT_CLEAR_PEAKS | FEAT_NEEDS_POLLING;
 		info->read_word_data = ltc3880_read_word_data;
 		info->pages = LTC3880_NUM_PAGES;
 		info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN
@@ -488,7 +698,23 @@ static int ltc2978_probe(struct i2c_client *client,
 		  | PMBUS_HAVE_POUT
 		  | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
 		break;
+	case ltc3882:
+		data->features |= FEAT_CLEAR_PEAKS | FEAT_NEEDS_POLLING;
+		info->read_word_data = ltc3880_read_word_data;
+		info->pages = LTC3880_NUM_PAGES;
+		info->func[0] = PMBUS_HAVE_VIN
+		  | PMBUS_HAVE_STATUS_INPUT
+		  | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+		  | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
+		  | PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP
+		  | PMBUS_HAVE_TEMP2 | PMBUS_HAVE_STATUS_TEMP;
+		info->func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+		  | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
+		  | PMBUS_HAVE_POUT
+		  | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
+		break;
 	case ltc3883:
+		data->features |= FEAT_CLEAR_PEAKS | FEAT_NEEDS_POLLING;
 		info->read_word_data = ltc3883_read_word_data;
 		info->pages = LTC3883_NUM_PAGES;
 		info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN
@@ -498,6 +724,21 @@ static int ltc2978_probe(struct i2c_client *client,
 		  | PMBUS_HAVE_PIN | PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP
 		  | PMBUS_HAVE_TEMP2 | PMBUS_HAVE_STATUS_TEMP;
 		break;
+	case ltc3886:
+		data->features |= FEAT_CLEAR_PEAKS | FEAT_NEEDS_POLLING;
+		info->read_word_data = ltc3883_read_word_data;
+		info->pages = LTC3880_NUM_PAGES;
+		info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN
+		  | PMBUS_HAVE_STATUS_INPUT
+		  | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+		  | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
+		  | PMBUS_HAVE_PIN | PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP
+		  | PMBUS_HAVE_TEMP2 | PMBUS_HAVE_STATUS_TEMP;
+		info->func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+		  | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
+		  | PMBUS_HAVE_POUT
+		  | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
+		break;
 	default:
 		return -ENODEV;
 	}
@@ -517,10 +758,17 @@ static int ltc2978_probe(struct i2c_client *client,
 #ifdef CONFIG_OF
 static const struct of_device_id ltc2978_of_match[] = {
 	{ .compatible = "lltc,ltc2974" },
+	{ .compatible = "lltc,ltc2975" },
 	{ .compatible = "lltc,ltc2977" },
 	{ .compatible = "lltc,ltc2978" },
+	{ .compatible = "lltc,ltc2980" },
 	{ .compatible = "lltc,ltc3880" },
+	{ .compatible = "lltc,ltc3882" },
 	{ .compatible = "lltc,ltc3883" },
+	{ .compatible = "lltc,ltc3886" },
+	{ .compatible = "lltc,ltc3887" },
+	{ .compatible = "lltc,ltm2987" },
+	{ .compatible = "lltc,ltm4675" },
 	{ .compatible = "lltc,ltm4676" },
 	{ }
 };
@@ -540,5 +788,5 @@ static struct i2c_driver ltc2978_driver = {
 module_i2c_driver(ltc2978_driver);
 
 MODULE_AUTHOR("Guenter Roeck");
-MODULE_DESCRIPTION("PMBus driver for LTC2974, LTC2978, LTC3880, LTC3883, and LTM4676");
+MODULE_DESCRIPTION("PMBus driver for LTC2978 and comppatible chips");
 MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/hwmon/pmbus/max20751.c b/kernel/drivers/hwmon/pmbus/max20751.c
new file mode 100644
index 000000000..ab74aeae8
--- /dev/null
+++ b/kernel/drivers/hwmon/pmbus/max20751.c
@@ -0,0 +1,64 @@
+/*
+ * Hardware monitoring driver for Maxim MAX20751
+ *
+ * Copyright (c) 2015 Guenter Roeck
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include "pmbus.h"
+
+static struct pmbus_driver_info max20751_info = {
+	.pages = 1,
+	.format[PSC_VOLTAGE_IN] = linear,
+	.format[PSC_VOLTAGE_OUT] = vid,
+	.vrm_version = vr12,
+	.format[PSC_TEMPERATURE] = linear,
+	.format[PSC_CURRENT_OUT] = linear,
+	.format[PSC_POWER] = linear,
+	.func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
+		PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
+		PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP |
+		PMBUS_HAVE_POUT,
+};
+
+static int max20751_probe(struct i2c_client *client,
+			  const struct i2c_device_id *id)
+{
+	return pmbus_do_probe(client, id, &max20751_info);
+}
+
+static const struct i2c_device_id max20751_id[] = {
+	{"max20751", 0},
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, max20751_id);
+
+static struct i2c_driver max20751_driver = {
+	.driver = {
+		   .name = "max20751",
+		   },
+	.probe = max20751_probe,
+	.remove = pmbus_do_remove,
+	.id_table = max20751_id,
+};
+
+module_i2c_driver(max20751_driver);
+
+MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
+MODULE_DESCRIPTION("PMBus driver for Maxim MAX20751");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/hwmon/pmbus/max34440.c b/kernel/drivers/hwmon/pmbus/max34440.c
index 7e930c3ce..74a1f6f68 100644
--- a/kernel/drivers/hwmon/pmbus/max34440.c
+++ b/kernel/drivers/hwmon/pmbus/max34440.c
@@ -19,6 +19,7 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#include <linux/bitops.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
@@ -38,10 +39,10 @@ enum chips { max34440, max34441, max34446, max34460, max34461 };
 #define MAX34446_MFR_IOUT_AVG		0xe2
 #define MAX34446_MFR_TEMPERATURE_AVG	0xe3
 
-#define MAX34440_STATUS_OC_WARN		(1 << 0)
-#define MAX34440_STATUS_OC_FAULT	(1 << 1)
-#define MAX34440_STATUS_OT_FAULT	(1 << 5)
-#define MAX34440_STATUS_OT_WARN		(1 << 6)
+#define MAX34440_STATUS_OC_WARN		BIT(0)
+#define MAX34440_STATUS_OC_FAULT	BIT(1)
+#define MAX34440_STATUS_OT_FAULT	BIT(5)
+#define MAX34440_STATUS_OT_WARN		BIT(6)
 
 struct max34440_data {
 	int id;
diff --git a/kernel/drivers/hwmon/pmbus/max8688.c b/kernel/drivers/hwmon/pmbus/max8688.c
index f04454a42..dd4883a19 100644
--- a/kernel/drivers/hwmon/pmbus/max8688.c
+++ b/kernel/drivers/hwmon/pmbus/max8688.c
@@ -18,6 +18,7 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#include <linux/bitops.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
@@ -30,15 +31,15 @@
 #define MAX8688_MFR_TEMPERATURE_PEAK	0xd6
 #define MAX8688_MFG_STATUS		0xd8
 
-#define MAX8688_STATUS_OC_FAULT		(1 << 4)
-#define MAX8688_STATUS_OV_FAULT		(1 << 5)
-#define MAX8688_STATUS_OV_WARNING	(1 << 8)
-#define MAX8688_STATUS_UV_FAULT		(1 << 9)
-#define MAX8688_STATUS_UV_WARNING	(1 << 10)
-#define MAX8688_STATUS_UC_FAULT		(1 << 11)
-#define MAX8688_STATUS_OC_WARNING	(1 << 12)
-#define MAX8688_STATUS_OT_FAULT		(1 << 13)
-#define MAX8688_STATUS_OT_WARNING	(1 << 14)
+#define MAX8688_STATUS_OC_FAULT		BIT(4)
+#define MAX8688_STATUS_OV_FAULT		BIT(5)
+#define MAX8688_STATUS_OV_WARNING	BIT(8)
+#define MAX8688_STATUS_UV_FAULT		BIT(9)
+#define MAX8688_STATUS_UV_WARNING	BIT(10)
+#define MAX8688_STATUS_UC_FAULT		BIT(11)
+#define MAX8688_STATUS_OC_WARNING	BIT(12)
+#define MAX8688_STATUS_OT_FAULT		BIT(13)
+#define MAX8688_STATUS_OT_WARNING	BIT(14)
 
 static int max8688_read_word_data(struct i2c_client *client, int page, int reg)
 {
diff --git a/kernel/drivers/hwmon/pmbus/pmbus.c b/kernel/drivers/hwmon/pmbus/pmbus.c
index 554d0249d..0a74991a6 100644
--- a/kernel/drivers/hwmon/pmbus/pmbus.c
+++ b/kernel/drivers/hwmon/pmbus/pmbus.c
@@ -129,6 +129,7 @@ static int pmbus_identify(struct i2c_client *client,
 				break;
 			case 1:
 				info->format[PSC_VOLTAGE_OUT] = vid;
+				info->vrm_version = vr11;
 				break;
 			case 2:
 				info->format[PSC_VOLTAGE_OUT] = direct;
@@ -193,6 +194,10 @@ static const struct i2c_device_id pmbus_id[] = {
 	{"pdt012", 1},
 	{"pmbus", 0},
 	{"tps40400", 1},
+	{"tps544b20", 1},
+	{"tps544b25", 1},
+	{"tps544c20", 1},
+	{"tps544c25", 1},
 	{"udt020", 1},
 	{}
 };
diff --git a/kernel/drivers/hwmon/pmbus/pmbus.h b/kernel/drivers/hwmon/pmbus/pmbus.h
index 89a23ff83..bfcb13bae 100644
--- a/kernel/drivers/hwmon/pmbus/pmbus.h
+++ b/kernel/drivers/hwmon/pmbus/pmbus.h
@@ -19,114 +19,116 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#include <linux/regulator/driver.h>
-
 #ifndef PMBUS_H
 #define PMBUS_H
 
+#include <linux/bitops.h>
+#include <linux/regulator/driver.h>
+
 /*
  * Registers
  */
-#define PMBUS_PAGE			0x00
-#define PMBUS_OPERATION			0x01
-#define PMBUS_ON_OFF_CONFIG		0x02
-#define PMBUS_CLEAR_FAULTS		0x03
-#define PMBUS_PHASE			0x04
-
-#define PMBUS_CAPABILITY		0x19
-#define PMBUS_QUERY			0x1A
-
-#define PMBUS_VOUT_MODE			0x20
-#define PMBUS_VOUT_COMMAND		0x21
-#define PMBUS_VOUT_TRIM			0x22
-#define PMBUS_VOUT_CAL_OFFSET		0x23
-#define PMBUS_VOUT_MAX			0x24
-#define PMBUS_VOUT_MARGIN_HIGH		0x25
-#define PMBUS_VOUT_MARGIN_LOW		0x26
-#define PMBUS_VOUT_TRANSITION_RATE	0x27
-#define PMBUS_VOUT_DROOP		0x28
-#define PMBUS_VOUT_SCALE_LOOP		0x29
-#define PMBUS_VOUT_SCALE_MONITOR	0x2A
-
-#define PMBUS_COEFFICIENTS		0x30
-#define PMBUS_POUT_MAX			0x31
-
-#define PMBUS_FAN_CONFIG_12		0x3A
-#define PMBUS_FAN_COMMAND_1		0x3B
-#define PMBUS_FAN_COMMAND_2		0x3C
-#define PMBUS_FAN_CONFIG_34		0x3D
-#define PMBUS_FAN_COMMAND_3		0x3E
-#define PMBUS_FAN_COMMAND_4		0x3F
-
-#define PMBUS_VOUT_OV_FAULT_LIMIT	0x40
-#define PMBUS_VOUT_OV_FAULT_RESPONSE	0x41
-#define PMBUS_VOUT_OV_WARN_LIMIT	0x42
-#define PMBUS_VOUT_UV_WARN_LIMIT	0x43
-#define PMBUS_VOUT_UV_FAULT_LIMIT	0x44
-#define PMBUS_VOUT_UV_FAULT_RESPONSE	0x45
-#define PMBUS_IOUT_OC_FAULT_LIMIT	0x46
-#define PMBUS_IOUT_OC_FAULT_RESPONSE	0x47
-#define PMBUS_IOUT_OC_LV_FAULT_LIMIT	0x48
-#define PMBUS_IOUT_OC_LV_FAULT_RESPONSE	0x49
-#define PMBUS_IOUT_OC_WARN_LIMIT	0x4A
-#define PMBUS_IOUT_UC_FAULT_LIMIT	0x4B
-#define PMBUS_IOUT_UC_FAULT_RESPONSE	0x4C
-
-#define PMBUS_OT_FAULT_LIMIT		0x4F
-#define PMBUS_OT_FAULT_RESPONSE		0x50
-#define PMBUS_OT_WARN_LIMIT		0x51
-#define PMBUS_UT_WARN_LIMIT		0x52
-#define PMBUS_UT_FAULT_LIMIT		0x53
-#define PMBUS_UT_FAULT_RESPONSE		0x54
-#define PMBUS_VIN_OV_FAULT_LIMIT	0x55
-#define PMBUS_VIN_OV_FAULT_RESPONSE	0x56
-#define PMBUS_VIN_OV_WARN_LIMIT		0x57
-#define PMBUS_VIN_UV_WARN_LIMIT		0x58
-#define PMBUS_VIN_UV_FAULT_LIMIT	0x59
-
-#define PMBUS_IIN_OC_FAULT_LIMIT	0x5B
-#define PMBUS_IIN_OC_WARN_LIMIT		0x5D
-
-#define PMBUS_POUT_OP_FAULT_LIMIT	0x68
-#define PMBUS_POUT_OP_WARN_LIMIT	0x6A
-#define PMBUS_PIN_OP_WARN_LIMIT		0x6B
-
-#define PMBUS_STATUS_BYTE		0x78
-#define PMBUS_STATUS_WORD		0x79
-#define PMBUS_STATUS_VOUT		0x7A
-#define PMBUS_STATUS_IOUT		0x7B
-#define PMBUS_STATUS_INPUT		0x7C
-#define PMBUS_STATUS_TEMPERATURE	0x7D
-#define PMBUS_STATUS_CML		0x7E
-#define PMBUS_STATUS_OTHER		0x7F
-#define PMBUS_STATUS_MFR_SPECIFIC	0x80
-#define PMBUS_STATUS_FAN_12		0x81
-#define PMBUS_STATUS_FAN_34		0x82
-
-#define PMBUS_READ_VIN			0x88
-#define PMBUS_READ_IIN			0x89
-#define PMBUS_READ_VCAP			0x8A
-#define PMBUS_READ_VOUT			0x8B
-#define PMBUS_READ_IOUT			0x8C
-#define PMBUS_READ_TEMPERATURE_1	0x8D
-#define PMBUS_READ_TEMPERATURE_2	0x8E
-#define PMBUS_READ_TEMPERATURE_3	0x8F
-#define PMBUS_READ_FAN_SPEED_1		0x90
-#define PMBUS_READ_FAN_SPEED_2		0x91
-#define PMBUS_READ_FAN_SPEED_3		0x92
-#define PMBUS_READ_FAN_SPEED_4		0x93
-#define PMBUS_READ_DUTY_CYCLE		0x94
-#define PMBUS_READ_FREQUENCY		0x95
-#define PMBUS_READ_POUT			0x96
-#define PMBUS_READ_PIN			0x97
-
-#define PMBUS_REVISION			0x98
-#define PMBUS_MFR_ID			0x99
-#define PMBUS_MFR_MODEL			0x9A
-#define PMBUS_MFR_REVISION		0x9B
-#define PMBUS_MFR_LOCATION		0x9C
-#define PMBUS_MFR_DATE			0x9D
-#define PMBUS_MFR_SERIAL		0x9E
+enum pmbus_regs {
+	PMBUS_PAGE			= 0x00,
+	PMBUS_OPERATION			= 0x01,
+	PMBUS_ON_OFF_CONFIG		= 0x02,
+	PMBUS_CLEAR_FAULTS		= 0x03,
+	PMBUS_PHASE			= 0x04,
+
+	PMBUS_CAPABILITY		= 0x19,
+	PMBUS_QUERY			= 0x1A,
+
+	PMBUS_VOUT_MODE			= 0x20,
+	PMBUS_VOUT_COMMAND		= 0x21,
+	PMBUS_VOUT_TRIM			= 0x22,
+	PMBUS_VOUT_CAL_OFFSET		= 0x23,
+	PMBUS_VOUT_MAX			= 0x24,
+	PMBUS_VOUT_MARGIN_HIGH		= 0x25,
+	PMBUS_VOUT_MARGIN_LOW		= 0x26,
+	PMBUS_VOUT_TRANSITION_RATE	= 0x27,
+	PMBUS_VOUT_DROOP		= 0x28,
+	PMBUS_VOUT_SCALE_LOOP		= 0x29,
+	PMBUS_VOUT_SCALE_MONITOR	= 0x2A,
+
+	PMBUS_COEFFICIENTS		= 0x30,
+	PMBUS_POUT_MAX			= 0x31,
+
+	PMBUS_FAN_CONFIG_12		= 0x3A,
+	PMBUS_FAN_COMMAND_1		= 0x3B,
+	PMBUS_FAN_COMMAND_2		= 0x3C,
+	PMBUS_FAN_CONFIG_34		= 0x3D,
+	PMBUS_FAN_COMMAND_3		= 0x3E,
+	PMBUS_FAN_COMMAND_4		= 0x3F,
+
+	PMBUS_VOUT_OV_FAULT_LIMIT	= 0x40,
+	PMBUS_VOUT_OV_FAULT_RESPONSE	= 0x41,
+	PMBUS_VOUT_OV_WARN_LIMIT	= 0x42,
+	PMBUS_VOUT_UV_WARN_LIMIT	= 0x43,
+	PMBUS_VOUT_UV_FAULT_LIMIT	= 0x44,
+	PMBUS_VOUT_UV_FAULT_RESPONSE	= 0x45,
+	PMBUS_IOUT_OC_FAULT_LIMIT	= 0x46,
+	PMBUS_IOUT_OC_FAULT_RESPONSE	= 0x47,
+	PMBUS_IOUT_OC_LV_FAULT_LIMIT	= 0x48,
+	PMBUS_IOUT_OC_LV_FAULT_RESPONSE	= 0x49,
+	PMBUS_IOUT_OC_WARN_LIMIT	= 0x4A,
+	PMBUS_IOUT_UC_FAULT_LIMIT	= 0x4B,
+	PMBUS_IOUT_UC_FAULT_RESPONSE	= 0x4C,
+
+	PMBUS_OT_FAULT_LIMIT		= 0x4F,
+	PMBUS_OT_FAULT_RESPONSE		= 0x50,
+	PMBUS_OT_WARN_LIMIT		= 0x51,
+	PMBUS_UT_WARN_LIMIT		= 0x52,
+	PMBUS_UT_FAULT_LIMIT		= 0x53,
+	PMBUS_UT_FAULT_RESPONSE		= 0x54,
+	PMBUS_VIN_OV_FAULT_LIMIT	= 0x55,
+	PMBUS_VIN_OV_FAULT_RESPONSE	= 0x56,
+	PMBUS_VIN_OV_WARN_LIMIT		= 0x57,
+	PMBUS_VIN_UV_WARN_LIMIT		= 0x58,
+	PMBUS_VIN_UV_FAULT_LIMIT	= 0x59,
+
+	PMBUS_IIN_OC_FAULT_LIMIT	= 0x5B,
+	PMBUS_IIN_OC_WARN_LIMIT		= 0x5D,
+
+	PMBUS_POUT_OP_FAULT_LIMIT	= 0x68,
+	PMBUS_POUT_OP_WARN_LIMIT	= 0x6A,
+	PMBUS_PIN_OP_WARN_LIMIT		= 0x6B,
+
+	PMBUS_STATUS_BYTE		= 0x78,
+	PMBUS_STATUS_WORD		= 0x79,
+	PMBUS_STATUS_VOUT		= 0x7A,
+	PMBUS_STATUS_IOUT		= 0x7B,
+	PMBUS_STATUS_INPUT		= 0x7C,
+	PMBUS_STATUS_TEMPERATURE	= 0x7D,
+	PMBUS_STATUS_CML		= 0x7E,
+	PMBUS_STATUS_OTHER		= 0x7F,
+	PMBUS_STATUS_MFR_SPECIFIC	= 0x80,
+	PMBUS_STATUS_FAN_12		= 0x81,
+	PMBUS_STATUS_FAN_34		= 0x82,
+
+	PMBUS_READ_VIN			= 0x88,
+	PMBUS_READ_IIN			= 0x89,
+	PMBUS_READ_VCAP			= 0x8A,
+	PMBUS_READ_VOUT			= 0x8B,
+	PMBUS_READ_IOUT			= 0x8C,
+	PMBUS_READ_TEMPERATURE_1	= 0x8D,
+	PMBUS_READ_TEMPERATURE_2	= 0x8E,
+	PMBUS_READ_TEMPERATURE_3	= 0x8F,
+	PMBUS_READ_FAN_SPEED_1		= 0x90,
+	PMBUS_READ_FAN_SPEED_2		= 0x91,
+	PMBUS_READ_FAN_SPEED_3		= 0x92,
+	PMBUS_READ_FAN_SPEED_4		= 0x93,
+	PMBUS_READ_DUTY_CYCLE		= 0x94,
+	PMBUS_READ_FREQUENCY		= 0x95,
+	PMBUS_READ_POUT			= 0x96,
+	PMBUS_READ_PIN			= 0x97,
+
+	PMBUS_REVISION			= 0x98,
+	PMBUS_MFR_ID			= 0x99,
+	PMBUS_MFR_MODEL			= 0x9A,
+	PMBUS_MFR_REVISION		= 0x9B,
+	PMBUS_MFR_LOCATION		= 0x9C,
+	PMBUS_MFR_DATE			= 0x9D,
+	PMBUS_MFR_SERIAL		= 0x9E,
 
 /*
  * Virtual registers.
@@ -148,55 +150,58 @@
  * the calling PMBus core code will abort if the chip driver returns an error
  * code when reading or writing virtual registers.
  */
-#define PMBUS_VIRT_BASE			0x100
-#define PMBUS_VIRT_READ_TEMP_AVG	(PMBUS_VIRT_BASE + 0)
-#define PMBUS_VIRT_READ_TEMP_MIN	(PMBUS_VIRT_BASE + 1)
-#define PMBUS_VIRT_READ_TEMP_MAX	(PMBUS_VIRT_BASE + 2)
-#define PMBUS_VIRT_RESET_TEMP_HISTORY	(PMBUS_VIRT_BASE + 3)
-#define PMBUS_VIRT_READ_VIN_AVG		(PMBUS_VIRT_BASE + 4)
-#define PMBUS_VIRT_READ_VIN_MIN		(PMBUS_VIRT_BASE + 5)
-#define PMBUS_VIRT_READ_VIN_MAX		(PMBUS_VIRT_BASE + 6)
-#define PMBUS_VIRT_RESET_VIN_HISTORY	(PMBUS_VIRT_BASE + 7)
-#define PMBUS_VIRT_READ_IIN_AVG		(PMBUS_VIRT_BASE + 8)
-#define PMBUS_VIRT_READ_IIN_MIN		(PMBUS_VIRT_BASE + 9)
-#define PMBUS_VIRT_READ_IIN_MAX		(PMBUS_VIRT_BASE + 10)
-#define PMBUS_VIRT_RESET_IIN_HISTORY	(PMBUS_VIRT_BASE + 11)
-#define PMBUS_VIRT_READ_PIN_AVG		(PMBUS_VIRT_BASE + 12)
-#define PMBUS_VIRT_READ_PIN_MAX		(PMBUS_VIRT_BASE + 13)
-#define PMBUS_VIRT_RESET_PIN_HISTORY	(PMBUS_VIRT_BASE + 14)
-#define PMBUS_VIRT_READ_POUT_AVG	(PMBUS_VIRT_BASE + 15)
-#define PMBUS_VIRT_READ_POUT_MAX	(PMBUS_VIRT_BASE + 16)
-#define PMBUS_VIRT_RESET_POUT_HISTORY	(PMBUS_VIRT_BASE + 17)
-#define PMBUS_VIRT_READ_VOUT_AVG	(PMBUS_VIRT_BASE + 18)
-#define PMBUS_VIRT_READ_VOUT_MIN	(PMBUS_VIRT_BASE + 19)
-#define PMBUS_VIRT_READ_VOUT_MAX	(PMBUS_VIRT_BASE + 20)
-#define PMBUS_VIRT_RESET_VOUT_HISTORY	(PMBUS_VIRT_BASE + 21)
-#define PMBUS_VIRT_READ_IOUT_AVG	(PMBUS_VIRT_BASE + 22)
-#define PMBUS_VIRT_READ_IOUT_MIN	(PMBUS_VIRT_BASE + 23)
-#define PMBUS_VIRT_READ_IOUT_MAX	(PMBUS_VIRT_BASE + 24)
-#define PMBUS_VIRT_RESET_IOUT_HISTORY	(PMBUS_VIRT_BASE + 25)
-#define PMBUS_VIRT_READ_TEMP2_AVG	(PMBUS_VIRT_BASE + 26)
-#define PMBUS_VIRT_READ_TEMP2_MIN	(PMBUS_VIRT_BASE + 27)
-#define PMBUS_VIRT_READ_TEMP2_MAX	(PMBUS_VIRT_BASE + 28)
-#define PMBUS_VIRT_RESET_TEMP2_HISTORY	(PMBUS_VIRT_BASE + 29)
-
-#define PMBUS_VIRT_READ_VMON		(PMBUS_VIRT_BASE + 30)
-#define PMBUS_VIRT_VMON_UV_WARN_LIMIT	(PMBUS_VIRT_BASE + 31)
-#define PMBUS_VIRT_VMON_OV_WARN_LIMIT	(PMBUS_VIRT_BASE + 32)
-#define PMBUS_VIRT_VMON_UV_FAULT_LIMIT	(PMBUS_VIRT_BASE + 33)
-#define PMBUS_VIRT_VMON_OV_FAULT_LIMIT	(PMBUS_VIRT_BASE + 34)
-#define PMBUS_VIRT_STATUS_VMON		(PMBUS_VIRT_BASE + 35)
+	PMBUS_VIRT_BASE			= 0x100,
+	PMBUS_VIRT_READ_TEMP_AVG,
+	PMBUS_VIRT_READ_TEMP_MIN,
+	PMBUS_VIRT_READ_TEMP_MAX,
+	PMBUS_VIRT_RESET_TEMP_HISTORY,
+	PMBUS_VIRT_READ_VIN_AVG,
+	PMBUS_VIRT_READ_VIN_MIN,
+	PMBUS_VIRT_READ_VIN_MAX,
+	PMBUS_VIRT_RESET_VIN_HISTORY,
+	PMBUS_VIRT_READ_IIN_AVG,
+	PMBUS_VIRT_READ_IIN_MIN,
+	PMBUS_VIRT_READ_IIN_MAX,
+	PMBUS_VIRT_RESET_IIN_HISTORY,
+	PMBUS_VIRT_READ_PIN_AVG,
+	PMBUS_VIRT_READ_PIN_MIN,
+	PMBUS_VIRT_READ_PIN_MAX,
+	PMBUS_VIRT_RESET_PIN_HISTORY,
+	PMBUS_VIRT_READ_POUT_AVG,
+	PMBUS_VIRT_READ_POUT_MIN,
+	PMBUS_VIRT_READ_POUT_MAX,
+	PMBUS_VIRT_RESET_POUT_HISTORY,
+	PMBUS_VIRT_READ_VOUT_AVG,
+	PMBUS_VIRT_READ_VOUT_MIN,
+	PMBUS_VIRT_READ_VOUT_MAX,
+	PMBUS_VIRT_RESET_VOUT_HISTORY,
+	PMBUS_VIRT_READ_IOUT_AVG,
+	PMBUS_VIRT_READ_IOUT_MIN,
+	PMBUS_VIRT_READ_IOUT_MAX,
+	PMBUS_VIRT_RESET_IOUT_HISTORY,
+	PMBUS_VIRT_READ_TEMP2_AVG,
+	PMBUS_VIRT_READ_TEMP2_MIN,
+	PMBUS_VIRT_READ_TEMP2_MAX,
+	PMBUS_VIRT_RESET_TEMP2_HISTORY,
+
+	PMBUS_VIRT_READ_VMON,
+	PMBUS_VIRT_VMON_UV_WARN_LIMIT,
+	PMBUS_VIRT_VMON_OV_WARN_LIMIT,
+	PMBUS_VIRT_VMON_UV_FAULT_LIMIT,
+	PMBUS_VIRT_VMON_OV_FAULT_LIMIT,
+	PMBUS_VIRT_STATUS_VMON,
+};
 
 /*
  * OPERATION
  */
-#define PB_OPERATION_CONTROL_ON		(1<<7)
+#define PB_OPERATION_CONTROL_ON		BIT(7)
 
 /*
  * CAPABILITY
  */
-#define PB_CAPABILITY_SMBALERT		(1<<4)
-#define PB_CAPABILITY_ERROR_CHECK	(1<<7)
+#define PB_CAPABILITY_SMBALERT		BIT(4)
+#define PB_CAPABILITY_ERROR_CHECK	BIT(7)
 
 /*
  * VOUT_MODE
@@ -211,94 +216,94 @@
 /*
  * Fan configuration
  */
-#define PB_FAN_2_PULSE_MASK		((1 << 0) | (1 << 1))
-#define PB_FAN_2_RPM			(1 << 2)
-#define PB_FAN_2_INSTALLED		(1 << 3)
-#define PB_FAN_1_PULSE_MASK		((1 << 4) | (1 << 5))
-#define PB_FAN_1_RPM			(1 << 6)
-#define PB_FAN_1_INSTALLED		(1 << 7)
+#define PB_FAN_2_PULSE_MASK		(BIT(0) | BIT(1))
+#define PB_FAN_2_RPM			BIT(2)
+#define PB_FAN_2_INSTALLED		BIT(3)
+#define PB_FAN_1_PULSE_MASK		(BIT(4) | BIT(5))
+#define PB_FAN_1_RPM			BIT(6)
+#define PB_FAN_1_INSTALLED		BIT(7)
 
 /*
  * STATUS_BYTE, STATUS_WORD (lower)
  */
-#define PB_STATUS_NONE_ABOVE		(1<<0)
-#define PB_STATUS_CML			(1<<1)
-#define PB_STATUS_TEMPERATURE		(1<<2)
-#define PB_STATUS_VIN_UV		(1<<3)
-#define PB_STATUS_IOUT_OC		(1<<4)
-#define PB_STATUS_VOUT_OV		(1<<5)
-#define PB_STATUS_OFF			(1<<6)
-#define PB_STATUS_BUSY			(1<<7)
+#define PB_STATUS_NONE_ABOVE		BIT(0)
+#define PB_STATUS_CML			BIT(1)
+#define PB_STATUS_TEMPERATURE		BIT(2)
+#define PB_STATUS_VIN_UV		BIT(3)
+#define PB_STATUS_IOUT_OC		BIT(4)
+#define PB_STATUS_VOUT_OV		BIT(5)
+#define PB_STATUS_OFF			BIT(6)
+#define PB_STATUS_BUSY			BIT(7)
 
 /*
  * STATUS_WORD (upper)
  */
-#define PB_STATUS_UNKNOWN		(1<<8)
-#define PB_STATUS_OTHER			(1<<9)
-#define PB_STATUS_FANS			(1<<10)
-#define PB_STATUS_POWER_GOOD_N		(1<<11)
-#define PB_STATUS_WORD_MFR		(1<<12)
-#define PB_STATUS_INPUT			(1<<13)
-#define PB_STATUS_IOUT_POUT		(1<<14)
-#define PB_STATUS_VOUT			(1<<15)
+#define PB_STATUS_UNKNOWN		BIT(8)
+#define PB_STATUS_OTHER			BIT(9)
+#define PB_STATUS_FANS			BIT(10)
+#define PB_STATUS_POWER_GOOD_N		BIT(11)
+#define PB_STATUS_WORD_MFR		BIT(12)
+#define PB_STATUS_INPUT			BIT(13)
+#define PB_STATUS_IOUT_POUT		BIT(14)
+#define PB_STATUS_VOUT			BIT(15)
 
 /*
  * STATUS_IOUT
  */
-#define PB_POUT_OP_WARNING		(1<<0)
-#define PB_POUT_OP_FAULT		(1<<1)
-#define PB_POWER_LIMITING		(1<<2)
-#define PB_CURRENT_SHARE_FAULT		(1<<3)
-#define PB_IOUT_UC_FAULT		(1<<4)
-#define PB_IOUT_OC_WARNING		(1<<5)
-#define PB_IOUT_OC_LV_FAULT		(1<<6)
-#define PB_IOUT_OC_FAULT		(1<<7)
+#define PB_POUT_OP_WARNING		BIT(0)
+#define PB_POUT_OP_FAULT		BIT(1)
+#define PB_POWER_LIMITING		BIT(2)
+#define PB_CURRENT_SHARE_FAULT		BIT(3)
+#define PB_IOUT_UC_FAULT		BIT(4)
+#define PB_IOUT_OC_WARNING		BIT(5)
+#define PB_IOUT_OC_LV_FAULT		BIT(6)
+#define PB_IOUT_OC_FAULT		BIT(7)
 
 /*
  * STATUS_VOUT, STATUS_INPUT
  */
-#define PB_VOLTAGE_UV_FAULT		(1<<4)
-#define PB_VOLTAGE_UV_WARNING		(1<<5)
-#define PB_VOLTAGE_OV_WARNING		(1<<6)
-#define PB_VOLTAGE_OV_FAULT		(1<<7)
+#define PB_VOLTAGE_UV_FAULT		BIT(4)
+#define PB_VOLTAGE_UV_WARNING		BIT(5)
+#define PB_VOLTAGE_OV_WARNING		BIT(6)
+#define PB_VOLTAGE_OV_FAULT		BIT(7)
 
 /*
  * STATUS_INPUT
  */
-#define PB_PIN_OP_WARNING		(1<<0)
-#define PB_IIN_OC_WARNING		(1<<1)
-#define PB_IIN_OC_FAULT			(1<<2)
+#define PB_PIN_OP_WARNING		BIT(0)
+#define PB_IIN_OC_WARNING		BIT(1)
+#define PB_IIN_OC_FAULT			BIT(2)
 
 /*
  * STATUS_TEMPERATURE
  */
-#define PB_TEMP_UT_FAULT		(1<<4)
-#define PB_TEMP_UT_WARNING		(1<<5)
-#define PB_TEMP_OT_WARNING		(1<<6)
-#define PB_TEMP_OT_FAULT		(1<<7)
+#define PB_TEMP_UT_FAULT		BIT(4)
+#define PB_TEMP_UT_WARNING		BIT(5)
+#define PB_TEMP_OT_WARNING		BIT(6)
+#define PB_TEMP_OT_FAULT		BIT(7)
 
 /*
  * STATUS_FAN
  */
-#define PB_FAN_AIRFLOW_WARNING		(1<<0)
-#define PB_FAN_AIRFLOW_FAULT		(1<<1)
-#define PB_FAN_FAN2_SPEED_OVERRIDE	(1<<2)
-#define PB_FAN_FAN1_SPEED_OVERRIDE	(1<<3)
-#define PB_FAN_FAN2_WARNING		(1<<4)
-#define PB_FAN_FAN1_WARNING		(1<<5)
-#define PB_FAN_FAN2_FAULT		(1<<6)
-#define PB_FAN_FAN1_FAULT		(1<<7)
+#define PB_FAN_AIRFLOW_WARNING		BIT(0)
+#define PB_FAN_AIRFLOW_FAULT		BIT(1)
+#define PB_FAN_FAN2_SPEED_OVERRIDE	BIT(2)
+#define PB_FAN_FAN1_SPEED_OVERRIDE	BIT(3)
+#define PB_FAN_FAN2_WARNING		BIT(4)
+#define PB_FAN_FAN1_WARNING		BIT(5)
+#define PB_FAN_FAN2_FAULT		BIT(6)
+#define PB_FAN_FAN1_FAULT		BIT(7)
 
 /*
  * CML_FAULT_STATUS
  */
-#define PB_CML_FAULT_OTHER_MEM_LOGIC	(1<<0)
-#define PB_CML_FAULT_OTHER_COMM		(1<<1)
-#define PB_CML_FAULT_PROCESSOR		(1<<3)
-#define PB_CML_FAULT_MEMORY		(1<<4)
-#define PB_CML_FAULT_PACKET_ERROR	(1<<5)
-#define PB_CML_FAULT_INVALID_DATA	(1<<6)
-#define PB_CML_FAULT_INVALID_COMMAND	(1<<7)
+#define PB_CML_FAULT_OTHER_MEM_LOGIC	BIT(0)
+#define PB_CML_FAULT_OTHER_COMM		BIT(1)
+#define PB_CML_FAULT_PROCESSOR		BIT(3)
+#define PB_CML_FAULT_MEMORY		BIT(4)
+#define PB_CML_FAULT_PACKET_ERROR	BIT(5)
+#define PB_CML_FAULT_INVALID_DATA	BIT(6)
+#define PB_CML_FAULT_INVALID_COMMAND	BIT(7)
 
 enum pmbus_sensor_classes {
 	PSC_VOLTAGE_IN = 0,
@@ -314,32 +319,34 @@ enum pmbus_sensor_classes {
 #define PMBUS_PAGES	32	/* Per PMBus specification */
 
 /* Functionality bit mask */
-#define PMBUS_HAVE_VIN		(1 << 0)
-#define PMBUS_HAVE_VCAP		(1 << 1)
-#define PMBUS_HAVE_VOUT		(1 << 2)
-#define PMBUS_HAVE_IIN		(1 << 3)
-#define PMBUS_HAVE_IOUT		(1 << 4)
-#define PMBUS_HAVE_PIN		(1 << 5)
-#define PMBUS_HAVE_POUT		(1 << 6)
-#define PMBUS_HAVE_FAN12	(1 << 7)
-#define PMBUS_HAVE_FAN34	(1 << 8)
-#define PMBUS_HAVE_TEMP		(1 << 9)
-#define PMBUS_HAVE_TEMP2	(1 << 10)
-#define PMBUS_HAVE_TEMP3	(1 << 11)
-#define PMBUS_HAVE_STATUS_VOUT	(1 << 12)
-#define PMBUS_HAVE_STATUS_IOUT	(1 << 13)
-#define PMBUS_HAVE_STATUS_INPUT	(1 << 14)
-#define PMBUS_HAVE_STATUS_TEMP	(1 << 15)
-#define PMBUS_HAVE_STATUS_FAN12	(1 << 16)
-#define PMBUS_HAVE_STATUS_FAN34	(1 << 17)
-#define PMBUS_HAVE_VMON		(1 << 18)
-#define PMBUS_HAVE_STATUS_VMON	(1 << 19)
+#define PMBUS_HAVE_VIN		BIT(0)
+#define PMBUS_HAVE_VCAP		BIT(1)
+#define PMBUS_HAVE_VOUT		BIT(2)
+#define PMBUS_HAVE_IIN		BIT(3)
+#define PMBUS_HAVE_IOUT		BIT(4)
+#define PMBUS_HAVE_PIN		BIT(5)
+#define PMBUS_HAVE_POUT		BIT(6)
+#define PMBUS_HAVE_FAN12	BIT(7)
+#define PMBUS_HAVE_FAN34	BIT(8)
+#define PMBUS_HAVE_TEMP		BIT(9)
+#define PMBUS_HAVE_TEMP2	BIT(10)
+#define PMBUS_HAVE_TEMP3	BIT(11)
+#define PMBUS_HAVE_STATUS_VOUT	BIT(12)
+#define PMBUS_HAVE_STATUS_IOUT	BIT(13)
+#define PMBUS_HAVE_STATUS_INPUT	BIT(14)
+#define PMBUS_HAVE_STATUS_TEMP	BIT(15)
+#define PMBUS_HAVE_STATUS_FAN12	BIT(16)
+#define PMBUS_HAVE_STATUS_FAN34	BIT(17)
+#define PMBUS_HAVE_VMON		BIT(18)
+#define PMBUS_HAVE_STATUS_VMON	BIT(19)
 
 enum pmbus_data_format { linear = 0, direct, vid };
+enum vrm_version { vr11 = 0, vr12 };
 
 struct pmbus_driver_info {
 	int pages;		/* Total number of pages */
 	enum pmbus_data_format format[PSC_NUM_CLASSES];
+	enum vrm_version vrm_version;
 	/*
 	 * Support one set of coefficients for each sensor type
 	 * Used for chips providing data in direct mode.
@@ -380,7 +387,7 @@ struct pmbus_driver_info {
 
 /* Regulator ops */
 
-extern struct regulator_ops pmbus_regulator_ops;
+extern const struct regulator_ops pmbus_regulator_ops;
 
 /* Macro for filling in array of struct regulator_desc */
 #define PMBUS_REGULATOR(_name, _id)				\
@@ -390,6 +397,7 @@ extern struct regulator_ops pmbus_regulator_ops;
 		.of_match = of_match_ptr(_name # _id),		\
 		.regulators_node = of_match_ptr("regulators"),	\
 		.ops = &pmbus_regulator_ops,			\
+		.type = REGULATOR_VOLTAGE,			\
 		.owner = THIS_MODULE,				\
 	}
 
diff --git a/kernel/drivers/hwmon/pmbus/pmbus_core.c b/kernel/drivers/hwmon/pmbus/pmbus_core.c
index f2e47c7dd..ba59eaef2 100644
--- a/kernel/drivers/hwmon/pmbus/pmbus_core.c
+++ b/kernel/drivers/hwmon/pmbus/pmbus_core.c
@@ -515,16 +515,24 @@ static long pmbus_reg2data_direct(struct pmbus_data *data,
 /*
  * Convert VID sensor values to milli- or micro-units
  * depending on sensor type.
- * We currently only support VR11.
  */
 static long pmbus_reg2data_vid(struct pmbus_data *data,
 			       struct pmbus_sensor *sensor)
 {
 	long val = sensor->data;
+	long rv = 0;
 
-	if (val < 0x02 || val > 0xb2)
-		return 0;
-	return DIV_ROUND_CLOSEST(160000 - (val - 2) * 625, 100);
+	switch (data->info->vrm_version) {
+	case vr11:
+		if (val >= 0x02 && val <= 0xb2)
+			rv = DIV_ROUND_CLOSEST(160000 - (val - 2) * 625, 100);
+		break;
+	case vr12:
+		if (val >= 0x01)
+			rv = 250 + (val - 1) * 5;
+		break;
+	}
+	return rv;
 }
 
 static long pmbus_reg2data(struct pmbus_data *data, struct pmbus_sensor *sensor)
@@ -1329,6 +1337,10 @@ static const struct pmbus_limit_attr pin_limit_attrs[] = {
 		.update = true,
 		.attr = "average",
 	}, {
+		.reg = PMBUS_VIRT_READ_PIN_MIN,
+		.update = true,
+		.attr = "input_lowest",
+	}, {
 		.reg = PMBUS_VIRT_READ_PIN_MAX,
 		.update = true,
 		.attr = "input_highest",
@@ -1359,6 +1371,10 @@ static const struct pmbus_limit_attr pout_limit_attrs[] = {
 		.update = true,
 		.attr = "average",
 	}, {
+		.reg = PMBUS_VIRT_READ_POUT_MIN,
+		.update = true,
+		.attr = "input_lowest",
+	}, {
 		.reg = PMBUS_VIRT_READ_POUT_MAX,
 		.update = true,
 		.attr = "input_highest",
@@ -1735,6 +1751,11 @@ static int pmbus_init_common(struct i2c_client *client, struct pmbus_data *data,
 		}
 	}
 
+	/* Enable PEC if the controller supports it */
+	ret = i2c_smbus_read_byte_data(client, PMBUS_CAPABILITY);
+	if (ret >= 0 && (ret & PB_CAPABILITY_ERROR_CHECK))
+		client->flags |= I2C_CLIENT_PEC;
+
 	pmbus_clear_faults(client);
 
 	if (info->identify) {
@@ -1796,7 +1817,7 @@ static int pmbus_regulator_disable(struct regulator_dev *rdev)
 	return _pmbus_regulator_on_off(rdev, 0);
 }
 
-struct regulator_ops pmbus_regulator_ops = {
+const struct regulator_ops pmbus_regulator_ops = {
 	.enable = pmbus_regulator_enable,
 	.disable = pmbus_regulator_disable,
 	.is_enabled = pmbus_regulator_is_enabled,
diff --git a/kernel/drivers/hwmon/pmbus/zl6100.c b/kernel/drivers/hwmon/pmbus/zl6100.c
index 819644121..771802d7e 100644
--- a/kernel/drivers/hwmon/pmbus/zl6100.c
+++ b/kernel/drivers/hwmon/pmbus/zl6100.c
@@ -19,6 +19,7 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#include <linux/bitops.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
@@ -44,16 +45,16 @@ struct zl6100_data {
 #define ZL6100_MFR_CONFIG		0xd0
 #define ZL6100_DEVICE_ID		0xe4
 
-#define ZL6100_MFR_XTEMP_ENABLE		(1 << 7)
+#define ZL6100_MFR_XTEMP_ENABLE		BIT(7)
 
 #define MFR_VMON_OV_FAULT_LIMIT		0xf5
 #define MFR_VMON_UV_FAULT_LIMIT		0xf6
 #define MFR_READ_VMON			0xf7
 
-#define VMON_UV_WARNING			(1 << 5)
-#define VMON_OV_WARNING			(1 << 4)
-#define VMON_UV_FAULT			(1 << 1)
-#define VMON_OV_FAULT			(1 << 0)
+#define VMON_UV_WARNING			BIT(5)
+#define VMON_OV_WARNING			BIT(4)
+#define VMON_UV_FAULT			BIT(1)
+#define VMON_OV_FAULT			BIT(0)
 
 #define ZL6100_WAIT_TIME		1000	/* uS	*/
 
diff --git a/kernel/drivers/hwmon/pwm-fan.c b/kernel/drivers/hwmon/pwm-fan.c
index 2d9a71269..3e23003f7 100644
--- a/kernel/drivers/hwmon/pwm-fan.c
+++ b/kernel/drivers/hwmon/pwm-fan.c
@@ -323,6 +323,7 @@ static const struct of_device_id of_pwm_fan_match[] = {
 	{ .compatible = "pwm-fan", },
 	{},
 };
+MODULE_DEVICE_TABLE(of, of_pwm_fan_match);
 
 static struct platform_driver pwm_fan_driver = {
 	.probe		= pwm_fan_probe,
diff --git a/kernel/drivers/hwmon/scpi-hwmon.c b/kernel/drivers/hwmon/scpi-hwmon.c
new file mode 100644
index 000000000..7e20567bc
--- /dev/null
+++ b/kernel/drivers/hwmon/scpi-hwmon.c
@@ -0,0 +1,289 @@
+/*
+ * System Control and Power Interface(SCPI) based hwmon sensor driver
+ *
+ * Copyright (C) 2015 ARM Ltd.
+ * Punit Agrawal <punit.agrawal@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/hwmon.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/scpi_protocol.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/thermal.h>
+
+struct sensor_data {
+	struct scpi_sensor_info info;
+	struct device_attribute dev_attr_input;
+	struct device_attribute dev_attr_label;
+	char input[20];
+	char label[20];
+};
+
+struct scpi_thermal_zone {
+	struct list_head list;
+	int sensor_id;
+	struct scpi_sensors *scpi_sensors;
+	struct thermal_zone_device *tzd;
+};
+
+struct scpi_sensors {
+	struct scpi_ops *scpi_ops;
+	struct sensor_data *data;
+	struct list_head thermal_zones;
+	struct attribute **attrs;
+	struct attribute_group group;
+	const struct attribute_group *groups[2];
+};
+
+static int scpi_read_temp(void *dev, int *temp)
+{
+	struct scpi_thermal_zone *zone = dev;
+	struct scpi_sensors *scpi_sensors = zone->scpi_sensors;
+	struct scpi_ops *scpi_ops = scpi_sensors->scpi_ops;
+	struct sensor_data *sensor = &scpi_sensors->data[zone->sensor_id];
+	u32 value;
+	int ret;
+
+	ret = scpi_ops->sensor_get_value(sensor->info.sensor_id, &value);
+	if (ret)
+		return ret;
+
+	*temp = value;
+	return 0;
+}
+
+/* hwmon callback functions */
+static ssize_t
+scpi_show_sensor(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct scpi_sensors *scpi_sensors = dev_get_drvdata(dev);
+	struct scpi_ops *scpi_ops = scpi_sensors->scpi_ops;
+	struct sensor_data *sensor;
+	u32 value;
+	int ret;
+
+	sensor = container_of(attr, struct sensor_data, dev_attr_input);
+
+	ret = scpi_ops->sensor_get_value(sensor->info.sensor_id, &value);
+	if (ret)
+		return ret;
+
+	return sprintf(buf, "%u\n", value);
+}
+
+static ssize_t
+scpi_show_label(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct sensor_data *sensor;
+
+	sensor = container_of(attr, struct sensor_data, dev_attr_label);
+
+	return sprintf(buf, "%s\n", sensor->info.name);
+}
+
+static void
+unregister_thermal_zones(struct platform_device *pdev,
+			 struct scpi_sensors *scpi_sensors)
+{
+	struct list_head *pos;
+
+	list_for_each(pos, &scpi_sensors->thermal_zones) {
+		struct scpi_thermal_zone *zone;
+
+		zone = list_entry(pos, struct scpi_thermal_zone, list);
+		thermal_zone_of_sensor_unregister(&pdev->dev, zone->tzd);
+	}
+}
+
+static struct thermal_zone_of_device_ops scpi_sensor_ops = {
+	.get_temp = scpi_read_temp,
+};
+
+static int scpi_hwmon_probe(struct platform_device *pdev)
+{
+	u16 nr_sensors, i;
+	int num_temp = 0, num_volt = 0, num_current = 0, num_power = 0;
+	struct scpi_ops *scpi_ops;
+	struct device *hwdev, *dev = &pdev->dev;
+	struct scpi_sensors *scpi_sensors;
+	int ret, idx;
+
+	scpi_ops = get_scpi_ops();
+	if (!scpi_ops)
+		return -EPROBE_DEFER;
+
+	ret = scpi_ops->sensor_get_capability(&nr_sensors);
+	if (ret)
+		return ret;
+
+	if (!nr_sensors)
+		return -ENODEV;
+
+	scpi_sensors = devm_kzalloc(dev, sizeof(*scpi_sensors), GFP_KERNEL);
+	if (!scpi_sensors)
+		return -ENOMEM;
+
+	scpi_sensors->data = devm_kcalloc(dev, nr_sensors,
+				   sizeof(*scpi_sensors->data), GFP_KERNEL);
+	if (!scpi_sensors->data)
+		return -ENOMEM;
+
+	scpi_sensors->attrs = devm_kcalloc(dev, (nr_sensors * 2) + 1,
+				   sizeof(*scpi_sensors->attrs), GFP_KERNEL);
+	if (!scpi_sensors->attrs)
+		return -ENOMEM;
+
+	scpi_sensors->scpi_ops = scpi_ops;
+
+	for (i = 0, idx = 0; i < nr_sensors; i++) {
+		struct sensor_data *sensor = &scpi_sensors->data[idx];
+
+		ret = scpi_ops->sensor_get_info(i, &sensor->info);
+		if (ret)
+			return ret;
+
+		switch (sensor->info.class) {
+		case TEMPERATURE:
+			snprintf(sensor->input, sizeof(sensor->input),
+				 "temp%d_input", num_temp + 1);
+			snprintf(sensor->label, sizeof(sensor->input),
+				 "temp%d_label", num_temp + 1);
+			num_temp++;
+			break;
+		case VOLTAGE:
+			snprintf(sensor->input, sizeof(sensor->input),
+				 "in%d_input", num_volt);
+			snprintf(sensor->label, sizeof(sensor->input),
+				 "in%d_label", num_volt);
+			num_volt++;
+			break;
+		case CURRENT:
+			snprintf(sensor->input, sizeof(sensor->input),
+				 "curr%d_input", num_current + 1);
+			snprintf(sensor->label, sizeof(sensor->input),
+				 "curr%d_label", num_current + 1);
+			num_current++;
+			break;
+		case POWER:
+			snprintf(sensor->input, sizeof(sensor->input),
+				 "power%d_input", num_power + 1);
+			snprintf(sensor->label, sizeof(sensor->input),
+				 "power%d_label", num_power + 1);
+			num_power++;
+			break;
+		default:
+			continue;
+		}
+
+		sensor->dev_attr_input.attr.mode = S_IRUGO;
+		sensor->dev_attr_input.show = scpi_show_sensor;
+		sensor->dev_attr_input.attr.name = sensor->input;
+
+		sensor->dev_attr_label.attr.mode = S_IRUGO;
+		sensor->dev_attr_label.show = scpi_show_label;
+		sensor->dev_attr_label.attr.name = sensor->label;
+
+		scpi_sensors->attrs[idx << 1] = &sensor->dev_attr_input.attr;
+		scpi_sensors->attrs[(idx << 1) + 1] = &sensor->dev_attr_label.attr;
+
+		sysfs_attr_init(scpi_sensors->attrs[idx << 1]);
+		sysfs_attr_init(scpi_sensors->attrs[(idx << 1) + 1]);
+		idx++;
+	}
+
+	scpi_sensors->group.attrs = scpi_sensors->attrs;
+	scpi_sensors->groups[0] = &scpi_sensors->group;
+
+	platform_set_drvdata(pdev, scpi_sensors);
+
+	hwdev = devm_hwmon_device_register_with_groups(dev,
+			"scpi_sensors", scpi_sensors, scpi_sensors->groups);
+
+	if (IS_ERR(hwdev))
+		return PTR_ERR(hwdev);
+
+	/*
+	 * Register the temperature sensors with the thermal framework
+	 * to allow their usage in setting up the thermal zones from
+	 * device tree.
+	 *
+	 * NOTE: Not all temperature sensors maybe used for thermal
+	 * control
+	 */
+	INIT_LIST_HEAD(&scpi_sensors->thermal_zones);
+	for (i = 0; i < nr_sensors; i++) {
+		struct sensor_data *sensor = &scpi_sensors->data[i];
+		struct scpi_thermal_zone *zone;
+
+		if (sensor->info.class != TEMPERATURE)
+			continue;
+
+		zone = devm_kzalloc(dev, sizeof(*zone), GFP_KERNEL);
+		if (!zone) {
+			ret = -ENOMEM;
+			goto unregister_tzd;
+		}
+
+		zone->sensor_id = i;
+		zone->scpi_sensors = scpi_sensors;
+		zone->tzd = thermal_zone_of_sensor_register(dev,
+				sensor->info.sensor_id, zone, &scpi_sensor_ops);
+		/*
+		 * The call to thermal_zone_of_sensor_register returns
+		 * an error for sensors that are not associated with
+		 * any thermal zones or if the thermal subsystem is
+		 * not configured.
+		 */
+		if (IS_ERR(zone->tzd)) {
+			devm_kfree(dev, zone);
+			continue;
+		}
+		list_add(&zone->list, &scpi_sensors->thermal_zones);
+	}
+
+	return 0;
+
+unregister_tzd:
+	unregister_thermal_zones(pdev, scpi_sensors);
+	return ret;
+}
+
+static int scpi_hwmon_remove(struct platform_device *pdev)
+{
+	struct scpi_sensors *scpi_sensors = platform_get_drvdata(pdev);
+
+	unregister_thermal_zones(pdev, scpi_sensors);
+
+	return 0;
+}
+
+static const struct of_device_id scpi_of_match[] = {
+	{.compatible = "arm,scpi-sensors"},
+	{},
+};
+
+static struct platform_driver scpi_hwmon_platdrv = {
+	.driver = {
+		.name	= "scpi-hwmon",
+		.owner	= THIS_MODULE,
+		.of_match_table = scpi_of_match,
+	},
+	.probe		= scpi_hwmon_probe,
+	.remove		= scpi_hwmon_remove,
+};
+module_platform_driver(scpi_hwmon_platdrv);
+
+MODULE_AUTHOR("Punit Agrawal <punit.agrawal@arm.com>");
+MODULE_DESCRIPTION("ARM SCPI HWMON interface driver");
+MODULE_LICENSE("GPL v2");
diff --git a/kernel/drivers/hwmon/sht15.c b/kernel/drivers/hwmon/sht15.c
index d4f0935da..a2fdbb7d2 100644
--- a/kernel/drivers/hwmon/sht15.c
+++ b/kernel/drivers/hwmon/sht15.c
@@ -33,6 +33,7 @@
 #include <linux/regulator/consumer.h>
 #include <linux/slab.h>
 #include <linux/atomic.h>
+#include <linux/bitrev.h>
 
 /* Commands */
 #define SHT15_MEASURE_TEMP		0x03
@@ -173,19 +174,6 @@ struct sht15_data {
 };
 
 /**
- * sht15_reverse() - reverse a byte
- * @byte:    byte to reverse.
- */
-static u8 sht15_reverse(u8 byte)
-{
-	u8 i, c;
-
-	for (c = 0, i = 0; i < 8; i++)
-		c |= (!!(byte & (1 << i))) << (7 - i);
-	return c;
-}
-
-/**
  * sht15_crc8() - compute crc8
  * @data:	sht15 specific data.
  * @value:	sht15 retrieved data.
@@ -196,7 +184,7 @@ static u8 sht15_crc8(struct sht15_data *data,
 		const u8 *value,
 		int len)
 {
-	u8 crc = sht15_reverse(data->val_status & 0x0F);
+	u8 crc = bitrev8(data->val_status & 0x0F);
 
 	while (len--) {
 		crc = sht15_crc8_table[*value ^ crc];
@@ -477,7 +465,7 @@ static int sht15_update_status(struct sht15_data *data)
 
 		if (data->checksumming) {
 			sht15_ack(data);
-			dev_checksum = sht15_reverse(sht15_read_byte(data));
+			dev_checksum = bitrev8(sht15_read_byte(data));
 			checksum_vals[0] = SHT15_READ_STATUS;
 			checksum_vals[1] = status;
 			data->checksum_ok = (sht15_crc8(data, checksum_vals, 2)
@@ -864,7 +852,7 @@ static void sht15_bh_read_data(struct work_struct *work_s)
 		 */
 		if (sht15_ack(data))
 			goto wakeup;
-		dev_checksum = sht15_reverse(sht15_read_byte(data));
+		dev_checksum = bitrev8(sht15_read_byte(data));
 		checksum_vals[0] = (data->state == SHT15_READING_TEMP) ?
 			SHT15_MEASURE_TEMP : SHT15_MEASURE_RH;
 		checksum_vals[1] = (u8) (val >> 8);
@@ -1074,7 +1062,7 @@ static int sht15_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static struct platform_device_id sht15_device_ids[] = {
+static const struct platform_device_id sht15_device_ids[] = {
 	{ "sht10", sht10 },
 	{ "sht11", sht11 },
 	{ "sht15", sht15 },
diff --git a/kernel/drivers/hwmon/tc74.c b/kernel/drivers/hwmon/tc74.c
new file mode 100644
index 000000000..d95165158
--- /dev/null
+++ b/kernel/drivers/hwmon/tc74.c
@@ -0,0 +1,177 @@
+/*
+ * An hwmon driver for the Microchip TC74
+ *
+ * Copyright 2015 Maciej Szmigiero <mail@maciej.szmigiero.name>
+ *
+ * Based on ad7414.c:
+ *	Copyright 2006 Stefan Roese, DENX Software Engineering
+ *	Copyright 2008 Sean MacLennan, PIKA Technologies
+ *	Copyright 2008 Frank Edelhaeuser, Spansion Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/bitops.h>
+#include <linux/err.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/i2c.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+
+/* TC74 registers */
+#define TC74_REG_TEMP		0x00
+#define TC74_REG_CONFIG		0x01
+
+struct tc74_data {
+	struct i2c_client	*client;
+	struct mutex		lock;	/* atomic read data updates */
+	bool			valid;	/* validity of fields below */
+	unsigned long		next_update;	/* In jiffies */
+	s8			temp_input;	/* Temp value in dC */
+};
+
+static int tc74_update_device(struct device *dev)
+{
+	struct tc74_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
+	int ret;
+
+	ret = mutex_lock_interruptible(&data->lock);
+	if (ret)
+		return ret;
+
+	if (time_after(jiffies, data->next_update) || !data->valid) {
+		s32 value;
+
+		value = i2c_smbus_read_byte_data(client, TC74_REG_CONFIG);
+		if (value < 0) {
+			dev_dbg(&client->dev, "TC74_REG_CONFIG read err %d\n",
+				(int)value);
+
+			ret = value;
+			goto ret_unlock;
+		}
+
+		if (!(value & BIT(6))) {
+			/* not ready yet */
+
+			ret = -EAGAIN;
+			goto ret_unlock;
+		}
+
+		value = i2c_smbus_read_byte_data(client, TC74_REG_TEMP);
+		if (value < 0) {
+			dev_dbg(&client->dev, "TC74_REG_TEMP read err %d\n",
+				(int)value);
+
+			ret = value;
+			goto ret_unlock;
+		}
+
+		data->temp_input = value;
+		data->next_update = jiffies + HZ / 4;
+		data->valid = true;
+	}
+
+ret_unlock:
+	mutex_unlock(&data->lock);
+
+	return ret;
+}
+
+static ssize_t show_temp_input(struct device *dev,
+			       struct device_attribute *attr, char *buf)
+{
+	struct tc74_data *data = dev_get_drvdata(dev);
+	int ret;
+
+	ret = tc74_update_device(dev);
+	if (ret)
+		return ret;
+
+	return sprintf(buf, "%d\n", data->temp_input * 1000);
+}
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input, NULL, 0);
+
+static struct attribute *tc74_attrs[] = {
+	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	NULL
+};
+
+ATTRIBUTE_GROUPS(tc74);
+
+static int tc74_probe(struct i2c_client *client,
+		      const struct i2c_device_id *dev_id)
+{
+	struct device *dev = &client->dev;
+	struct tc74_data *data;
+	struct device *hwmon_dev;
+	s32 conf;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		return -EOPNOTSUPP;
+
+	data = devm_kzalloc(dev, sizeof(struct tc74_data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->client = client;
+	mutex_init(&data->lock);
+
+	/* Make sure the chip is powered up. */
+	conf = i2c_smbus_read_byte_data(client, TC74_REG_CONFIG);
+	if (conf < 0) {
+		dev_err(dev, "unable to read config register\n");
+
+		return conf;
+	}
+
+	if (conf & 0x3f) {
+		dev_err(dev, "invalid config register value\n");
+
+		return -ENODEV;
+	}
+
+	if (conf & BIT(7)) {
+		s32 ret;
+
+		conf &= ~BIT(7);
+
+		ret = i2c_smbus_write_byte_data(client, TC74_REG_CONFIG, conf);
+		if (ret)
+			dev_warn(dev, "unable to disable STANDBY\n");
+	}
+
+	hwmon_dev = devm_hwmon_device_register_with_groups(dev,
+							   client->name,
+							   data, tc74_groups);
+	return PTR_ERR_OR_ZERO(hwmon_dev);
+}
+
+static const struct i2c_device_id tc74_id[] = {
+	{ "tc74", 0 },
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, tc74_id);
+
+static struct i2c_driver tc74_driver = {
+	.driver = {
+		.name	= "tc74",
+	},
+	.probe	= tc74_probe,
+	.id_table = tc74_id,
+};
+
+module_i2c_driver(tc74_driver);
+
+MODULE_AUTHOR("Maciej Szmigiero <mail@maciej.szmigiero.name>");
+
+MODULE_DESCRIPTION("TC74 driver");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/hwmon/tmp102.c b/kernel/drivers/hwmon/tmp102.c
index 9da2735f1..5289aa098 100644
--- a/kernel/drivers/hwmon/tmp102.c
+++ b/kernel/drivers/hwmon/tmp102.c
@@ -58,6 +58,7 @@ struct tmp102 {
 	u16 config_orig;
 	unsigned long last_update;
 	int temp[3];
+	bool first_time;
 };
 
 /* convert left adjusted 13-bit TMP102 register value to milliCelsius */
@@ -93,15 +94,22 @@ static struct tmp102 *tmp102_update_device(struct device *dev)
 				tmp102->temp[i] = tmp102_reg_to_mC(status);
 		}
 		tmp102->last_update = jiffies;
+		tmp102->first_time = false;
 	}
 	mutex_unlock(&tmp102->lock);
 	return tmp102;
 }
 
-static int tmp102_read_temp(void *dev, long *temp)
+static int tmp102_read_temp(void *dev, int *temp)
 {
 	struct tmp102 *tmp102 = tmp102_update_device(dev);
 
+	/* Is it too early even to return a conversion? */
+	if (tmp102->first_time) {
+		dev_dbg(dev, "%s: Conversion not ready yet..\n", __func__);
+		return -EAGAIN;
+	}
+
 	*temp = tmp102->temp[0];
 
 	return 0;
@@ -114,6 +122,10 @@ static ssize_t tmp102_show_temp(struct device *dev,
 	struct sensor_device_attribute *sda = to_sensor_dev_attr(attr);
 	struct tmp102 *tmp102 = tmp102_update_device(dev);
 
+	/* Is it too early even to return a read? */
+	if (tmp102->first_time)
+		return -EAGAIN;
+
 	return sprintf(buf, "%d\n", tmp102->temp[sda->index]);
 }
 
@@ -207,7 +219,9 @@ static int tmp102_probe(struct i2c_client *client,
 		status = -ENODEV;
 		goto fail_restore_config;
 	}
-	tmp102->last_update = jiffies - HZ;
+	tmp102->last_update = jiffies;
+	/* Mark that we are not ready with data until conversion is complete */
+	tmp102->first_time = true;
 	mutex_init(&tmp102->lock);
 
 	hwmon_dev = hwmon_device_register_with_groups(dev, client->name,
diff --git a/kernel/drivers/hwmon/w83627ehf.c b/kernel/drivers/hwmon/w83627ehf.c
index b10353b31..697007afb 100644
--- a/kernel/drivers/hwmon/w83627ehf.c
+++ b/kernel/drivers/hwmon/w83627ehf.c
@@ -1937,27 +1937,11 @@ static inline void w83627ehf_init_device(struct w83627ehf_data *data,
 static void w82627ehf_swap_tempreg(struct w83627ehf_data *data,
 				   int r1, int r2)
 {
-	u16 tmp;
-
-	tmp = data->temp_src[r1];
-	data->temp_src[r1] = data->temp_src[r2];
-	data->temp_src[r2] = tmp;
-
-	tmp = data->reg_temp[r1];
-	data->reg_temp[r1] = data->reg_temp[r2];
-	data->reg_temp[r2] = tmp;
-
-	tmp = data->reg_temp_over[r1];
-	data->reg_temp_over[r1] = data->reg_temp_over[r2];
-	data->reg_temp_over[r2] = tmp;
-
-	tmp = data->reg_temp_hyst[r1];
-	data->reg_temp_hyst[r1] = data->reg_temp_hyst[r2];
-	data->reg_temp_hyst[r2] = tmp;
-
-	tmp = data->reg_temp_config[r1];
-	data->reg_temp_config[r1] = data->reg_temp_config[r2];
-	data->reg_temp_config[r2] = tmp;
+	swap(data->temp_src[r1], data->temp_src[r2]);
+	swap(data->reg_temp[r1], data->reg_temp[r2]);
+	swap(data->reg_temp_over[r1], data->reg_temp_over[r2]);
+	swap(data->reg_temp_hyst[r1], data->reg_temp_hyst[r2]);
+	swap(data->reg_temp_config[r1], data->reg_temp_config[r2]);
 }
 
 static void
diff --git a/kernel/drivers/hwmon/w83792d.c b/kernel/drivers/hwmon/w83792d.c
index 4068db4d9..0a8bce726 100644
--- a/kernel/drivers/hwmon/w83792d.c
+++ b/kernel/drivers/hwmon/w83792d.c
@@ -289,10 +289,7 @@ struct w83792d_data {
 	u8 temp1[3];		/* current, over, thyst */
 	u8 temp_add[2][6];	/* Register value */
 	u8 fan_div[7];		/* Register encoding, shifted right */
-	u8 pwm[7];		/*
-				 * We only consider the first 3 set of pwm,
-				 * although 792 chip has 7 set of pwm.
-				 */
+	u8 pwm[7];		/* The 7 PWM outputs */
 	u8 pwmenable[3];
 	u32 alarms;		/* realtime status register encoding,combined */
 	u8 chassis;		/* Chassis status */
@@ -1075,6 +1072,10 @@ static DEVICE_ATTR(intrusion0_alarm, S_IRUGO | S_IWUSR,
 static SENSOR_DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 0);
 static SENSOR_DEVICE_ATTR(pwm2, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 1);
 static SENSOR_DEVICE_ATTR(pwm3, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 2);
+static SENSOR_DEVICE_ATTR(pwm4, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 3);
+static SENSOR_DEVICE_ATTR(pwm5, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 4);
+static SENSOR_DEVICE_ATTR(pwm6, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 5);
+static SENSOR_DEVICE_ATTR(pwm7, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 6);
 static SENSOR_DEVICE_ATTR(pwm1_enable, S_IWUSR | S_IRUGO,
 			show_pwmenable, store_pwmenable, 1);
 static SENSOR_DEVICE_ATTR(pwm2_enable, S_IWUSR | S_IRUGO,
@@ -1087,6 +1088,14 @@ static SENSOR_DEVICE_ATTR(pwm2_mode, S_IWUSR | S_IRUGO,
 			show_pwm_mode, store_pwm_mode, 1);
 static SENSOR_DEVICE_ATTR(pwm3_mode, S_IWUSR | S_IRUGO,
 			show_pwm_mode, store_pwm_mode, 2);
+static SENSOR_DEVICE_ATTR(pwm4_mode, S_IWUSR | S_IRUGO,
+			show_pwm_mode, store_pwm_mode, 3);
+static SENSOR_DEVICE_ATTR(pwm5_mode, S_IWUSR | S_IRUGO,
+			show_pwm_mode, store_pwm_mode, 4);
+static SENSOR_DEVICE_ATTR(pwm6_mode, S_IWUSR | S_IRUGO,
+			show_pwm_mode, store_pwm_mode, 5);
+static SENSOR_DEVICE_ATTR(pwm7_mode, S_IWUSR | S_IRUGO,
+			show_pwm_mode, store_pwm_mode, 6);
 static SENSOR_DEVICE_ATTR(tolerance1, S_IWUSR | S_IRUGO,
 			show_tolerance, store_tolerance, 1);
 static SENSOR_DEVICE_ATTR(tolerance2, S_IWUSR | S_IRUGO,
@@ -1177,30 +1186,38 @@ static SENSOR_DEVICE_ATTR(fan6_div, S_IWUSR | S_IRUGO,
 static SENSOR_DEVICE_ATTR(fan7_div, S_IWUSR | S_IRUGO,
 			show_fan_div, store_fan_div, 7);
 
-static struct attribute *w83792d_attributes_fan[4][5] = {
+static struct attribute *w83792d_attributes_fan[4][7] = {
 	{
 		&sensor_dev_attr_fan4_input.dev_attr.attr,
 		&sensor_dev_attr_fan4_min.dev_attr.attr,
 		&sensor_dev_attr_fan4_div.dev_attr.attr,
 		&sensor_dev_attr_fan4_alarm.dev_attr.attr,
+		&sensor_dev_attr_pwm4.dev_attr.attr,
+		&sensor_dev_attr_pwm4_mode.dev_attr.attr,
 		NULL
 	}, {
 		&sensor_dev_attr_fan5_input.dev_attr.attr,
 		&sensor_dev_attr_fan5_min.dev_attr.attr,
 		&sensor_dev_attr_fan5_div.dev_attr.attr,
 		&sensor_dev_attr_fan5_alarm.dev_attr.attr,
+		&sensor_dev_attr_pwm5.dev_attr.attr,
+		&sensor_dev_attr_pwm5_mode.dev_attr.attr,
 		NULL
 	}, {
 		&sensor_dev_attr_fan6_input.dev_attr.attr,
 		&sensor_dev_attr_fan6_min.dev_attr.attr,
 		&sensor_dev_attr_fan6_div.dev_attr.attr,
 		&sensor_dev_attr_fan6_alarm.dev_attr.attr,
+		&sensor_dev_attr_pwm6.dev_attr.attr,
+		&sensor_dev_attr_pwm6_mode.dev_attr.attr,
 		NULL
 	}, {
 		&sensor_dev_attr_fan7_input.dev_attr.attr,
 		&sensor_dev_attr_fan7_min.dev_attr.attr,
 		&sensor_dev_attr_fan7_div.dev_attr.attr,
 		&sensor_dev_attr_fan7_alarm.dev_attr.attr,
+		&sensor_dev_attr_pwm7.dev_attr.attr,
+		&sensor_dev_attr_pwm7_mode.dev_attr.attr,
 		NULL
 	}
 };
author	José Pekkarinen <jose.pekkarinen@nokia.com>	2016-04-11 10:41:07 +0300
committer	José Pekkarinen <jose.pekkarinen@nokia.com>	2016-04-13 08:17:18 +0300
commit	e09b41010ba33a20a87472ee821fa407a5b8da36 (patch)
tree	d10dc367189862e7ca5c592f033dc3726e1df4e3 /kernel/drivers/hwmon
parent	f93b97fd65072de626c074dbe099a1fff05ce060 (diff)