Upgrade to 4.4.50-rt62

The current kernel is based on rt kernel v4.4.6-rt14. We will upgrade it
to 4.4.50-rt62.
The command to achieve it is:
a) Clone a git repo from
git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-stable-rt.git

b) Get the diff between this two changesets:
git diff 640eca2901f3435e616157b11379d3223a44b391
705619beeea1b0b48219a683fd1a901a86fdaf5e

where the two commits are:
[yjiang5@jnakajim-build linux-stable-rt]$ git show --oneline --name-only
640eca2901f3435e616157b11379d3223a44b391
640eca2901f3 v4.4.6-rt14
localversion-rt
[yjiang5@jnakajim-build linux-stable-rt]$ git show --oneline --name-only
705619beeea1b0b48219a683fd1a901a86fdaf5e
705619beeea1 Linux 4.4.50-rt62
localversion-rt

c) One patch has been backported thus revert the patch before applying.

 filterdiff -p1 -x scripts/package/Makefile
~/tmp/v4.4.6-rt14-4.4.50-rt62.diff  |patch -p1 --dry-run

Upstream status: backport

Change-Id: I244d57a32f6066e5a5b9915f9fbf99e7bbca6e01
Signed-off-by: Yunhong Jiang <yunhong.jiang@linux.intel.com>

10 files changed, 105 insertions, 46 deletions

diff --git a/kernel/drivers/hwmon/ads7828.c b/kernel/drivers/hwmon/ads7828.c
index 6c99ee7ba..ee396ff16 100644
--- a/kernel/drivers/hwmon/ads7828.c
+++ b/kernel/drivers/hwmon/ads7828.c
@@ -120,6 +120,7 @@ static int ads7828_probe(struct i2c_client *client,
 	unsigned int vref_mv = ADS7828_INT_VREF_MV;
 	bool diff_input = false;
 	bool ext_vref = false;
+	unsigned int regval;
 
 	data = devm_kzalloc(dev, sizeof(struct ads7828_data), GFP_KERNEL);
 	if (!data)
@@ -154,6 +155,15 @@ static int ads7828_probe(struct i2c_client *client,
 	if (!diff_input)
 		data->cmd_byte |= ADS7828_CMD_SD_SE;
 
+	/*
+	 * Datasheet specifies internal reference voltage is disabled by
+	 * default. The internal reference voltage needs to be enabled and
+	 * voltage needs to settle before getting valid ADC data. So perform a
+	 * dummy read to enable the internal reference voltage.
+	 */
+	if (!ext_vref)
+		regmap_read(data->regmap, data->cmd_byte, &regval);
+
 	hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
 							   data,
 							   ads7828_groups);
diff --git a/kernel/drivers/hwmon/adt7411.c b/kernel/drivers/hwmon/adt7411.c
index 827c03703..a7f886961 100644
--- a/kernel/drivers/hwmon/adt7411.c
+++ b/kernel/drivers/hwmon/adt7411.c
@@ -30,6 +30,7 @@
 
 #define ADT7411_REG_CFG1			0x18
 #define ADT7411_CFG1_START_MONITOR		(1 << 0)
+#define ADT7411_CFG1_RESERVED_BIT3		(1 << 3)
 
 #define ADT7411_REG_CFG2			0x19
 #define ADT7411_CFG2_DISABLE_AVG		(1 << 5)
@@ -296,8 +297,10 @@ static int adt7411_probe(struct i2c_client *client,
 	mutex_init(&data->device_lock);
 	mutex_init(&data->update_lock);
 
+	/* According to the datasheet, we must only write 1 to bit 3 */
 	ret = adt7411_modify_bit(client, ADT7411_REG_CFG1,
-				 ADT7411_CFG1_START_MONITOR, 1);
+				 ADT7411_CFG1_RESERVED_BIT3
+				 | ADT7411_CFG1_START_MONITOR, 1);
 	if (ret < 0)
 		return ret;
 
diff --git a/kernel/drivers/hwmon/amc6821.c b/kernel/drivers/hwmon/amc6821.c
index 12e851a5a..46b4e35fd 100644
--- a/kernel/drivers/hwmon/amc6821.c
+++ b/kernel/drivers/hwmon/amc6821.c
@@ -188,8 +188,8 @@ static struct amc6821_data *amc6821_update_device(struct device *dev)
 			!data->valid) {
 
 		for (i = 0; i < TEMP_IDX_LEN; i++)
-			data->temp[i] = i2c_smbus_read_byte_data(client,
-				temp_reg[i]);
+			data->temp[i] = (int8_t)i2c_smbus_read_byte_data(
+				client, temp_reg[i]);
 
 		data->stat1 = i2c_smbus_read_byte_data(client,
 			AMC6821_REG_STAT1);
diff --git a/kernel/drivers/hwmon/dell-smm-hwmon.c b/kernel/drivers/hwmon/dell-smm-hwmon.c
index c43318d34..a9356a3de 100644
--- a/kernel/drivers/hwmon/dell-smm-hwmon.c
+++ b/kernel/drivers/hwmon/dell-smm-hwmon.c
@@ -66,11 +66,13 @@
 
 static DEFINE_MUTEX(i8k_mutex);
 static char bios_version[4];
+static char bios_machineid[16];
 static struct device *i8k_hwmon_dev;
 static u32 i8k_hwmon_flags;
 static uint i8k_fan_mult = I8K_FAN_MULT;
 static uint i8k_pwm_mult;
 static uint i8k_fan_max = I8K_FAN_HIGH;
+static bool disallow_fan_type_call;
 
 #define I8K_HWMON_HAVE_TEMP1	(1 << 0)
 #define I8K_HWMON_HAVE_TEMP2	(1 << 1)
@@ -94,13 +96,13 @@ module_param(ignore_dmi, bool, 0);
 MODULE_PARM_DESC(ignore_dmi, "Continue probing hardware even if DMI data does not match");
 
 #if IS_ENABLED(CONFIG_I8K)
-static bool restricted;
+static bool restricted = true;
 module_param(restricted, bool, 0);
-MODULE_PARM_DESC(restricted, "Allow fan control if SYS_ADMIN capability set");
+MODULE_PARM_DESC(restricted, "Restrict fan control and serial number to CAP_SYS_ADMIN (default: 1)");
 
 static bool power_status;
 module_param(power_status, bool, 0600);
-MODULE_PARM_DESC(power_status, "Report power status in /proc/i8k");
+MODULE_PARM_DESC(power_status, "Report power status in /proc/i8k (default: 0)");
 #endif
 
 static uint fan_mult;
@@ -235,14 +237,28 @@ static int i8k_get_fan_speed(int fan)
 /*
  * Read the fan type.
  */
-static int i8k_get_fan_type(int fan)
+static int _i8k_get_fan_type(int fan)
 {
 	struct smm_regs regs = { .eax = I8K_SMM_GET_FAN_TYPE, };
 
+	if (disallow_fan_type_call)
+		return -EINVAL;
+
 	regs.ebx = fan & 0xff;
 	return i8k_smm(&regs) ? : regs.eax & 0xff;
 }
 
+static int i8k_get_fan_type(int fan)
+{
+	/* I8K_SMM_GET_FAN_TYPE SMM call is expensive, so cache values */
+	static int types[2] = { INT_MIN, INT_MIN };
+
+	if (types[fan] == INT_MIN)
+		types[fan] = _i8k_get_fan_type(fan);
+
+	return types[fan];
+}
+
 /*
  * Read the fan nominal rpm for specific fan speed.
  */
@@ -392,9 +408,11 @@ i8k_ioctl_unlocked(struct file *fp, unsigned int cmd, unsigned long arg)
 		break;
 
 	case I8K_MACHINE_ID:
-		memset(buff, 0, 16);
-		strlcpy(buff, i8k_get_dmi_data(DMI_PRODUCT_SERIAL),
-			sizeof(buff));
+		if (restricted && !capable(CAP_SYS_ADMIN))
+			return -EPERM;
+
+		memset(buff, 0, sizeof(buff));
+		strlcpy(buff, bios_machineid, sizeof(buff));
 		break;
 
 	case I8K_FN_STATUS:
@@ -511,7 +529,7 @@ static int i8k_proc_show(struct seq_file *seq, void *offset)
 	seq_printf(seq, "%s %s %s %d %d %d %d %d %d %d\n",
 		   I8K_PROC_FMT,
 		   bios_version,
-		   i8k_get_dmi_data(DMI_PRODUCT_SERIAL),
+		   (restricted && !capable(CAP_SYS_ADMIN)) ? "-1" : bios_machineid,
 		   cpu_temp,
 		   left_fan, right_fan, left_speed, right_speed,
 		   ac_power, fn_key);
@@ -718,6 +736,9 @@ static struct attribute *i8k_attrs[] = {
 static umode_t i8k_is_visible(struct kobject *kobj, struct attribute *attr,
 			      int index)
 {
+	if (disallow_fan_type_call &&
+	    (index == 9 || index == 12))
+		return 0;
 	if (index >= 0 && index <= 1 &&
 	    !(i8k_hwmon_flags & I8K_HWMON_HAVE_TEMP1))
 		return 0;
@@ -767,13 +788,17 @@ static int __init i8k_init_hwmon(void)
 	if (err >= 0)
 		i8k_hwmon_flags |= I8K_HWMON_HAVE_TEMP4;
 
-	/* First fan attributes, if fan type is OK */
-	err = i8k_get_fan_type(0);
+	/* First fan attributes, if fan status or type is OK */
+	err = i8k_get_fan_status(0);
+	if (err < 0)
+		err = i8k_get_fan_type(0);
 	if (err >= 0)
 		i8k_hwmon_flags |= I8K_HWMON_HAVE_FAN1;
 
-	/* Second fan attributes, if fan type is OK */
-	err = i8k_get_fan_type(1);
+	/* Second fan attributes, if fan status or type is OK */
+	err = i8k_get_fan_status(1);
+	if (err < 0)
+		err = i8k_get_fan_type(1);
 	if (err >= 0)
 		i8k_hwmon_flags |= I8K_HWMON_HAVE_FAN2;
 
@@ -929,12 +954,14 @@ static struct dmi_system_id i8k_dmi_table[] __initdata = {
 
 MODULE_DEVICE_TABLE(dmi, i8k_dmi_table);
 
-static struct dmi_system_id i8k_blacklist_dmi_table[] __initdata = {
+/*
+ * On some machines once I8K_SMM_GET_FAN_TYPE is issued then CPU fan speed
+ * randomly going up and down due to bug in Dell SMM or BIOS. Here is blacklist
+ * of affected Dell machines for which we disallow I8K_SMM_GET_FAN_TYPE call.
+ * See bug: https://bugzilla.kernel.org/show_bug.cgi?id=100121
+ */
+static struct dmi_system_id i8k_blacklist_fan_type_dmi_table[] __initdata = {
 	{
-		/*
-		 * CPU fan speed going up and down on Dell Studio XPS 8000
-		 * for unknown reasons.
-		 */
 		.ident = "Dell Studio XPS 8000",
 		.matches = {
 			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
@@ -942,16 +969,19 @@ static struct dmi_system_id i8k_blacklist_dmi_table[] __initdata = {
 		},
 	},
 	{
-		/*
-		 * CPU fan speed going up and down on Dell Studio XPS 8100
-		 * for unknown reasons.
-		 */
 		.ident = "Dell Studio XPS 8100",
 		.matches = {
 			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
 			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Studio XPS 8100"),
 		},
 	},
+	{
+		.ident = "Dell Inspiron 580",
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Inspiron 580 "),
+		},
+	},
 	{ }
 };
 
@@ -966,8 +996,7 @@ static int __init i8k_probe(void)
 	/*
 	 * Get DMI information
 	 */
-	if (!dmi_check_system(i8k_dmi_table) ||
-	    dmi_check_system(i8k_blacklist_dmi_table)) {
+	if (!dmi_check_system(i8k_dmi_table)) {
 		if (!ignore_dmi && !force)
 			return -ENODEV;
 
@@ -978,8 +1007,13 @@ static int __init i8k_probe(void)
 			i8k_get_dmi_data(DMI_BIOS_VERSION));
 	}
 
+	if (dmi_check_system(i8k_blacklist_fan_type_dmi_table))
+		disallow_fan_type_call = true;
+
 	strlcpy(bios_version, i8k_get_dmi_data(DMI_BIOS_VERSION),
 		sizeof(bios_version));
+	strlcpy(bios_machineid, i8k_get_dmi_data(DMI_PRODUCT_SERIAL),
+		sizeof(bios_machineid));
 
 	/*
 	 * Get SMM Dell signature
diff --git a/kernel/drivers/hwmon/ds620.c b/kernel/drivers/hwmon/ds620.c
index edf550fc4..0043a4c02 100644
--- a/kernel/drivers/hwmon/ds620.c
+++ b/kernel/drivers/hwmon/ds620.c
@@ -166,7 +166,7 @@ static ssize_t set_temp(struct device *dev, struct device_attribute *da,
 	if (res)
 		return res;
 
-	val = (val * 10 / 625) * 8;
+	val = (clamp_val(val, -128000, 128000) * 10 / 625) * 8;
 
 	mutex_lock(&data->update_lock);
 	data->temp[attr->index] = val;
diff --git a/kernel/drivers/hwmon/g762.c b/kernel/drivers/hwmon/g762.c
index b96a2a9e4..628be9c95 100644
--- a/kernel/drivers/hwmon/g762.c
+++ b/kernel/drivers/hwmon/g762.c
@@ -193,14 +193,17 @@ static inline unsigned int rpm_from_cnt(u8 cnt, u32 clk_freq, u16 p,
  * Convert fan RPM value from sysfs into count value for fan controller
  * register (FAN_SET_CNT).
  */
-static inline unsigned char cnt_from_rpm(u32 rpm, u32 clk_freq, u16 p,
+static inline unsigned char cnt_from_rpm(unsigned long rpm, u32 clk_freq, u16 p,
 					 u8 clk_div, u8 gear_mult)
 {
-	if (!rpm)         /* to stop the fan, set cnt to 255 */
+	unsigned long f1 = clk_freq * 30 * gear_mult;
+	unsigned long f2 = p * clk_div;
+
+	if (!rpm)	/* to stop the fan, set cnt to 255 */
 		return 0xff;
 
-	return clamp_val(((clk_freq * 30 * gear_mult) / (rpm * p * clk_div)),
-			 0, 255);
+	rpm = clamp_val(rpm, f1 / (255 * f2), ULONG_MAX / f2);
+	return DIV_ROUND_CLOSEST(f1, rpm * f2);
 }
 
 /* helper to grab and cache data, at most one time per second */
diff --git a/kernel/drivers/hwmon/iio_hwmon.c b/kernel/drivers/hwmon/iio_hwmon.c
index 17ae2eb26..d5c06f276 100644
--- a/kernel/drivers/hwmon/iio_hwmon.c
+++ b/kernel/drivers/hwmon/iio_hwmon.c
@@ -109,24 +109,24 @@ static int iio_hwmon_probe(struct platform_device *pdev)
 
 		switch (type) {
 		case IIO_VOLTAGE:
-			a->dev_attr.attr.name = kasprintf(GFP_KERNEL,
-							  "in%d_input",
-							  in_i++);
+			a->dev_attr.attr.name = devm_kasprintf(dev, GFP_KERNEL,
+							       "in%d_input",
+							       in_i++);
 			break;
 		case IIO_TEMP:
-			a->dev_attr.attr.name = kasprintf(GFP_KERNEL,
-							  "temp%d_input",
-							  temp_i++);
+			a->dev_attr.attr.name = devm_kasprintf(dev, GFP_KERNEL,
+							       "temp%d_input",
+							       temp_i++);
 			break;
 		case IIO_CURRENT:
-			a->dev_attr.attr.name = kasprintf(GFP_KERNEL,
-							  "curr%d_input",
-							  curr_i++);
+			a->dev_attr.attr.name = devm_kasprintf(dev, GFP_KERNEL,
+							       "curr%d_input",
+							       curr_i++);
 			break;
 		case IIO_HUMIDITYRELATIVE:
-			a->dev_attr.attr.name = kasprintf(GFP_KERNEL,
-							  "humidity%d_input",
-							  humidity_i++);
+			a->dev_attr.attr.name = devm_kasprintf(dev, GFP_KERNEL,
+							       "humidity%d_input",
+							       humidity_i++);
 			break;
 		default:
 			ret = -EINVAL;
diff --git a/kernel/drivers/hwmon/max1111.c b/kernel/drivers/hwmon/max1111.c
index 36544c4f6..303d0c9df 100644
--- a/kernel/drivers/hwmon/max1111.c
+++ b/kernel/drivers/hwmon/max1111.c
@@ -85,6 +85,9 @@ static struct max1111_data *the_max1111;
 
 int max1111_read_channel(int channel)
 {
+	if (!the_max1111 || !the_max1111->spi)
+		return -ENODEV;
+
 	return max1111_read(&the_max1111->spi->dev, channel);
 }
 EXPORT_SYMBOL(max1111_read_channel);
@@ -258,6 +261,9 @@ static int max1111_remove(struct spi_device *spi)
 {
 	struct max1111_data *data = spi_get_drvdata(spi);
 
+#ifdef CONFIG_SHARPSL_PM
+	the_max1111 = NULL;
+#endif
 	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&spi->dev.kobj, &max1110_attr_group);
 	sysfs_remove_group(&spi->dev.kobj, &max1111_attr_group);
diff --git a/kernel/drivers/hwmon/nct7802.c b/kernel/drivers/hwmon/nct7802.c
index 3ce33d244..12b94b094 100644
--- a/kernel/drivers/hwmon/nct7802.c
+++ b/kernel/drivers/hwmon/nct7802.c
@@ -259,13 +259,15 @@ static int nct7802_read_fan_min(struct nct7802_data *data, u8 reg_fan_low,
 		ret = 0;
 	else if (ret)
 		ret = DIV_ROUND_CLOSEST(1350000U, ret);
+	else
+		ret = 1350000U;
 abort:
 	mutex_unlock(&data->access_lock);
 	return ret;
 }
 
 static int nct7802_write_fan_min(struct nct7802_data *data, u8 reg_fan_low,
-				 u8 reg_fan_high, unsigned int limit)
+				 u8 reg_fan_high, unsigned long limit)
 {
 	int err;
 
@@ -326,8 +328,8 @@ static int nct7802_write_voltage(struct nct7802_data *data, int nr, int index,
 	int shift = 8 - REG_VOLTAGE_LIMIT_MSB_SHIFT[index - 1][nr];
 	int err;
 
+	voltage = clamp_val(voltage, 0, 0x3ff * nct7802_vmul[nr]);
 	voltage = DIV_ROUND_CLOSEST(voltage, nct7802_vmul[nr]);
-	voltage = clamp_val(voltage, 0, 0x3ff);
 
 	mutex_lock(&data->access_lock);
 	err = regmap_write(data->regmap,
@@ -402,7 +404,7 @@ static ssize_t store_temp(struct device *dev, struct device_attribute *attr,
 	if (err < 0)
 		return err;
 
-	val = clamp_val(DIV_ROUND_CLOSEST(val, 1000), -128, 127);
+	val = DIV_ROUND_CLOSEST(clamp_val(val, -128000, 127000), 1000);
 
 	err = regmap_write(data->regmap, nr, val & 0xff);
 	return err ? : count;
diff --git a/kernel/drivers/hwmon/scpi-hwmon.c b/kernel/drivers/hwmon/scpi-hwmon.c
index 7e20567bc..6827169c8 100644
--- a/kernel/drivers/hwmon/scpi-hwmon.c
+++ b/kernel/drivers/hwmon/scpi-hwmon.c
@@ -272,6 +272,7 @@ static const struct of_device_id scpi_of_match[] = {
 	{.compatible = "arm,scpi-sensors"},
 	{},
 };
+MODULE_DEVICE_TABLE(of, scpi_of_match);
 
 static struct platform_driver scpi_hwmon_platdrv = {
 	.driver = {