These changes are the raw update to linux-4.4.6-rt14. Kernel sources

are taken from kernel.org, and rt patch from the rt wiki download page.

During the rebasing, the following patch collided:

Force tick interrupt and get rid of softirq magic(I70131fb85).

Collisions have been removed because its logic was found on the
source already.

Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>

1 files changed, 259 insertions, 99 deletions

diff --git a/kernel/drivers/hwmon/pmbus/adm1275.c b/kernel/drivers/hwmon/pmbus/adm1275.c
index 60aad9570..188af4c89 100644
--- a/kernel/drivers/hwmon/pmbus/adm1275.c
+++ b/kernel/drivers/hwmon/pmbus/adm1275.c
@@ -21,46 +21,120 @@
 #include <linux/err.h>
 #include <linux/slab.h>
 #include <linux/i2c.h>
+#include <linux/bitops.h>
 #include "pmbus.h"
 
-enum chips { adm1075, adm1275, adm1276 };
+enum chips { adm1075, adm1275, adm1276, adm1293, adm1294 };
+
+#define ADM1275_MFR_STATUS_IOUT_WARN2	BIT(0)
+#define ADM1293_MFR_STATUS_VAUX_UV_WARN	BIT(5)
+#define ADM1293_MFR_STATUS_VAUX_OV_WARN	BIT(6)
 
 #define ADM1275_PEAK_IOUT		0xd0
 #define ADM1275_PEAK_VIN		0xd1
 #define ADM1275_PEAK_VOUT		0xd2
 #define ADM1275_PMON_CONFIG		0xd4
 
-#define ADM1275_VIN_VOUT_SELECT		(1 << 6)
-#define ADM1275_VRANGE			(1 << 5)
-#define ADM1075_IRANGE_50		(1 << 4)
-#define ADM1075_IRANGE_25		(1 << 3)
-#define ADM1075_IRANGE_MASK		((1 << 3) | (1 << 4))
+#define ADM1275_VIN_VOUT_SELECT		BIT(6)
+#define ADM1275_VRANGE			BIT(5)
+#define ADM1075_IRANGE_50		BIT(4)
+#define ADM1075_IRANGE_25		BIT(3)
+#define ADM1075_IRANGE_MASK		(BIT(3) | BIT(4))
+
+#define ADM1293_IRANGE_25		0
+#define ADM1293_IRANGE_50		BIT(6)
+#define ADM1293_IRANGE_100		BIT(7)
+#define ADM1293_IRANGE_200		(BIT(6) | BIT(7))
+#define ADM1293_IRANGE_MASK		(BIT(6) | BIT(7))
+
+#define ADM1293_VIN_SEL_012		BIT(2)
+#define ADM1293_VIN_SEL_074		BIT(3)
+#define ADM1293_VIN_SEL_210		(BIT(2) | BIT(3))
+#define ADM1293_VIN_SEL_MASK		(BIT(2) | BIT(3))
+
+#define ADM1293_VAUX_EN			BIT(1)
 
 #define ADM1275_IOUT_WARN2_LIMIT	0xd7
 #define ADM1275_DEVICE_CONFIG		0xd8
 
-#define ADM1275_IOUT_WARN2_SELECT	(1 << 4)
+#define ADM1275_IOUT_WARN2_SELECT	BIT(4)
 
 #define ADM1276_PEAK_PIN		0xda
-
-#define ADM1275_MFR_STATUS_IOUT_WARN2	(1 << 0)
-
 #define ADM1075_READ_VAUX		0xdd
 #define ADM1075_VAUX_OV_WARN_LIMIT	0xde
 #define ADM1075_VAUX_UV_WARN_LIMIT	0xdf
+#define ADM1293_IOUT_MIN		0xe3
+#define ADM1293_PIN_MIN			0xe4
 #define ADM1075_VAUX_STATUS		0xf6
 
-#define ADM1075_VAUX_OV_WARN		(1<<7)
-#define ADM1075_VAUX_UV_WARN		(1<<6)
+#define ADM1075_VAUX_OV_WARN		BIT(7)
+#define ADM1075_VAUX_UV_WARN		BIT(6)
 
 struct adm1275_data {
 	int id;
 	bool have_oc_fault;
+	bool have_uc_fault;
+	bool have_vout;
+	bool have_vaux_status;
+	bool have_mfr_vaux_status;
+	bool have_iout_min;
+	bool have_pin_min;
+	bool have_pin_max;
 	struct pmbus_driver_info info;
 };
 
 #define to_adm1275_data(x)  container_of(x, struct adm1275_data, info)
 
+struct coefficients {
+	s16 m;
+	s16 b;
+	s16 R;
+};
+
+static const struct coefficients adm1075_coefficients[] = {
+	[0] = { 27169, 0, -1 },		/* voltage */
+	[1] = { 806, 20475, -1 },	/* current, irange25 */
+	[2] = { 404, 20475, -1 },	/* current, irange50 */
+	[3] = { 0, -1, 8549 },		/* power, irange25 */
+	[4] = { 0, -1, 4279 },		/* power, irange50 */
+};
+
+static const struct coefficients adm1275_coefficients[] = {
+	[0] = { 19199, 0, -2 },		/* voltage, vrange set */
+	[1] = { 6720, 0, -1 },		/* voltage, vrange not set */
+	[2] = { 807, 20475, -1 },	/* current */
+};
+
+static const struct coefficients adm1276_coefficients[] = {
+	[0] = { 19199, 0, -2 },		/* voltage, vrange set */
+	[1] = { 6720, 0, -1 },		/* voltage, vrange not set */
+	[2] = { 807, 20475, -1 },	/* current */
+	[3] = { 6043, 0, -2 },		/* power, vrange set */
+	[4] = { 2115, 0, -1 },		/* power, vrange not set */
+};
+
+static const struct coefficients adm1293_coefficients[] = {
+	[0] = { 3333, -1, 0 },		/* voltage, vrange 1.2V */
+	[1] = { 5552, -5, -1 },		/* voltage, vrange 7.4V */
+	[2] = { 19604, -50, -2 },	/* voltage, vrange 21V */
+	[3] = { 8000, -100, -2 },	/* current, irange25 */
+	[4] = { 4000, -100, -2 },	/* current, irange50 */
+	[5] = { 20000, -1000, -3 },	/* current, irange100 */
+	[6] = { 10000, -1000, -3 },	/* current, irange200 */
+	[7] = { 10417, 0, -1 },		/* power, 1.2V, irange25 */
+	[8] = { 5208, 0, -1 },		/* power, 1.2V, irange50 */
+	[9] = { 26042, 0, -2 },		/* power, 1.2V, irange100 */
+	[10] = { 13021, 0, -2 },	/* power, 1.2V, irange200 */
+	[11] = { 17351, 0, -2 },	/* power, 7.4V, irange25 */
+	[12] = { 8676, 0, -2 },		/* power, 7.4V, irange50 */
+	[13] = { 4338, 0, -2 },		/* power, 7.4V, irange100 */
+	[14] = { 21689, 0, -3 },	/* power, 7.4V, irange200 */
+	[15] = { 6126, 0, -2 },		/* power, 21V, irange25 */
+	[16] = { 30631, 0, -3 },	/* power, 21V, irange50 */
+	[17] = { 15316, 0, -3 },	/* power, 21V, irange100 */
+	[18] = { 7658, 0, -3 },		/* power, 21V, irange200 */
+};
+
 static int adm1275_read_word_data(struct i2c_client *client, int page, int reg)
 {
 	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
@@ -72,42 +146,37 @@ static int adm1275_read_word_data(struct i2c_client *client, int page, int reg)
 
 	switch (reg) {
 	case PMBUS_IOUT_UC_FAULT_LIMIT:
-		if (data->have_oc_fault) {
-			ret = -ENXIO;
-			break;
-		}
+		if (!data->have_uc_fault)
+			return -ENXIO;
 		ret = pmbus_read_word_data(client, 0, ADM1275_IOUT_WARN2_LIMIT);
 		break;
 	case PMBUS_IOUT_OC_FAULT_LIMIT:
-		if (!data->have_oc_fault) {
-			ret = -ENXIO;
-			break;
-		}
+		if (!data->have_oc_fault)
+			return -ENXIO;
 		ret = pmbus_read_word_data(client, 0, ADM1275_IOUT_WARN2_LIMIT);
 		break;
 	case PMBUS_VOUT_OV_WARN_LIMIT:
-		if (data->id != adm1075) {
-			ret = -ENODATA;
-			break;
-		}
+		if (data->have_vout)
+			return -ENODATA;
 		ret = pmbus_read_word_data(client, 0,
 					   ADM1075_VAUX_OV_WARN_LIMIT);
 		break;
 	case PMBUS_VOUT_UV_WARN_LIMIT:
-		if (data->id != adm1075) {
-			ret = -ENODATA;
-			break;
-		}
+		if (data->have_vout)
+			return -ENODATA;
 		ret = pmbus_read_word_data(client, 0,
 					   ADM1075_VAUX_UV_WARN_LIMIT);
 		break;
 	case PMBUS_READ_VOUT:
-		if (data->id != adm1075) {
-			ret = -ENODATA;
-			break;
-		}
+		if (data->have_vout)
+			return -ENODATA;
 		ret = pmbus_read_word_data(client, 0, ADM1075_READ_VAUX);
 		break;
+	case PMBUS_VIRT_READ_IOUT_MIN:
+		if (!data->have_iout_min)
+			return -ENXIO;
+		ret = pmbus_read_word_data(client, 0, ADM1293_IOUT_MIN);
+		break;
 	case PMBUS_VIRT_READ_IOUT_MAX:
 		ret = pmbus_read_word_data(client, 0, ADM1275_PEAK_IOUT);
 		break;
@@ -117,11 +186,14 @@ static int adm1275_read_word_data(struct i2c_client *client, int page, int reg)
 	case PMBUS_VIRT_READ_VIN_MAX:
 		ret = pmbus_read_word_data(client, 0, ADM1275_PEAK_VIN);
 		break;
+	case PMBUS_VIRT_READ_PIN_MIN:
+		if (!data->have_pin_min)
+			return -ENXIO;
+		ret = pmbus_read_word_data(client, 0, ADM1293_PIN_MIN);
+		break;
 	case PMBUS_VIRT_READ_PIN_MAX:
-		if (data->id == adm1275) {
-			ret = -ENXIO;
-			break;
-		}
+		if (!data->have_pin_max)
+			return -ENXIO;
 		ret = pmbus_read_word_data(client, 0, ADM1276_PEAK_PIN);
 		break;
 	case PMBUS_VIRT_RESET_IOUT_HISTORY:
@@ -129,8 +201,8 @@ static int adm1275_read_word_data(struct i2c_client *client, int page, int reg)
 	case PMBUS_VIRT_RESET_VIN_HISTORY:
 		break;
 	case PMBUS_VIRT_RESET_PIN_HISTORY:
-		if (data->id == adm1275)
-			ret = -ENXIO;
+		if (!data->have_pin_max)
+			return -ENXIO;
 		break;
 	default:
 		ret = -ENODATA;
@@ -142,6 +214,8 @@ static int adm1275_read_word_data(struct i2c_client *client, int page, int reg)
 static int adm1275_write_word_data(struct i2c_client *client, int page, int reg,
 				   u16 word)
 {
+	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+	const struct adm1275_data *data = to_adm1275_data(info);
 	int ret;
 
 	if (page)
@@ -155,6 +229,9 @@ static int adm1275_write_word_data(struct i2c_client *client, int page, int reg,
 		break;
 	case PMBUS_VIRT_RESET_IOUT_HISTORY:
 		ret = pmbus_write_word_data(client, 0, ADM1275_PEAK_IOUT, 0);
+		if (!ret && data->have_iout_min)
+			ret = pmbus_write_word_data(client, 0,
+						    ADM1293_IOUT_MIN, 0);
 		break;
 	case PMBUS_VIRT_RESET_VOUT_HISTORY:
 		ret = pmbus_write_word_data(client, 0, ADM1275_PEAK_VOUT, 0);
@@ -164,6 +241,9 @@ static int adm1275_write_word_data(struct i2c_client *client, int page, int reg,
 		break;
 	case PMBUS_VIRT_RESET_PIN_HISTORY:
 		ret = pmbus_write_word_data(client, 0, ADM1276_PEAK_PIN, 0);
+		if (!ret && data->have_pin_min)
+			ret = pmbus_write_word_data(client, 0,
+						    ADM1293_PIN_MIN, 0);
 		break;
 	default:
 		ret = -ENODATA;
@@ -186,29 +266,40 @@ static int adm1275_read_byte_data(struct i2c_client *client, int page, int reg)
 		ret = pmbus_read_byte_data(client, page, PMBUS_STATUS_IOUT);
 		if (ret < 0)
 			break;
+		if (!data->have_oc_fault && !data->have_uc_fault)
+			break;
 		mfr_status = pmbus_read_byte_data(client, page,
 						  PMBUS_STATUS_MFR_SPECIFIC);
-		if (mfr_status < 0) {
-			ret = mfr_status;
-			break;
-		}
+		if (mfr_status < 0)
+			return mfr_status;
 		if (mfr_status & ADM1275_MFR_STATUS_IOUT_WARN2) {
 			ret |= data->have_oc_fault ?
 			  PB_IOUT_OC_FAULT : PB_IOUT_UC_FAULT;
 		}
 		break;
 	case PMBUS_STATUS_VOUT:
-		if (data->id != adm1075) {
-			ret = -ENODATA;
-			break;
-		}
+		if (data->have_vout)
+			return -ENODATA;
 		ret = 0;
-		mfr_status = pmbus_read_byte_data(client, 0,
-						  ADM1075_VAUX_STATUS);
-		if (mfr_status & ADM1075_VAUX_OV_WARN)
-			ret |= PB_VOLTAGE_OV_WARNING;
-		if (mfr_status & ADM1075_VAUX_UV_WARN)
-			ret |= PB_VOLTAGE_UV_WARNING;
+		if (data->have_vaux_status) {
+			mfr_status = pmbus_read_byte_data(client, 0,
+							  ADM1075_VAUX_STATUS);
+			if (mfr_status < 0)
+				return mfr_status;
+			if (mfr_status & ADM1075_VAUX_OV_WARN)
+				ret |= PB_VOLTAGE_OV_WARNING;
+			if (mfr_status & ADM1075_VAUX_UV_WARN)
+				ret |= PB_VOLTAGE_UV_WARNING;
+		} else if (data->have_mfr_vaux_status) {
+			mfr_status = pmbus_read_byte_data(client, page,
+						PMBUS_STATUS_MFR_SPECIFIC);
+			if (mfr_status < 0)
+				return mfr_status;
+			if (mfr_status & ADM1293_MFR_STATUS_VAUX_OV_WARN)
+				ret |= PB_VOLTAGE_OV_WARNING;
+			if (mfr_status & ADM1293_MFR_STATUS_VAUX_UV_WARN)
+				ret |= PB_VOLTAGE_UV_WARNING;
+		}
 		break;
 	default:
 		ret = -ENODATA;
@@ -221,6 +312,8 @@ static const struct i2c_device_id adm1275_id[] = {
 	{ "adm1075", adm1075 },
 	{ "adm1275", adm1275 },
 	{ "adm1276", adm1276 },
+	{ "adm1293", adm1293 },
+	{ "adm1294", adm1294 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, adm1275_id);
@@ -234,6 +327,8 @@ static int adm1275_probe(struct i2c_client *client,
 	struct pmbus_driver_info *info;
 	struct adm1275_data *data;
 	const struct i2c_device_id *mid;
+	const struct coefficients *coefficients;
+	int vindex = -1, voindex = -1, cindex = -1, pindex = -1;
 
 	if (!i2c_check_functionality(client->adapter,
 				     I2C_FUNC_SMBUS_READ_BYTE_DATA
@@ -290,61 +385,38 @@ static int adm1275_probe(struct i2c_client *client,
 	info->format[PSC_VOLTAGE_IN] = direct;
 	info->format[PSC_VOLTAGE_OUT] = direct;
 	info->format[PSC_CURRENT_OUT] = direct;
-	info->m[PSC_CURRENT_OUT] = 807;
-	info->b[PSC_CURRENT_OUT] = 20475;
-	info->R[PSC_CURRENT_OUT] = -1;
+	info->format[PSC_POWER] = direct;
 	info->func[0] = PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT;
 
 	info->read_word_data = adm1275_read_word_data;
 	info->read_byte_data = adm1275_read_byte_data;
 	info->write_word_data = adm1275_write_word_data;
 
-	if (data->id == adm1075) {
-		info->m[PSC_VOLTAGE_IN] = 27169;
-		info->b[PSC_VOLTAGE_IN] = 0;
-		info->R[PSC_VOLTAGE_IN] = -1;
-		info->m[PSC_VOLTAGE_OUT] = 27169;
-		info->b[PSC_VOLTAGE_OUT] = 0;
-		info->R[PSC_VOLTAGE_OUT] = -1;
-	} else if (config & ADM1275_VRANGE) {
-		info->m[PSC_VOLTAGE_IN] = 19199;
-		info->b[PSC_VOLTAGE_IN] = 0;
-		info->R[PSC_VOLTAGE_IN] = -2;
-		info->m[PSC_VOLTAGE_OUT] = 19199;
-		info->b[PSC_VOLTAGE_OUT] = 0;
-		info->R[PSC_VOLTAGE_OUT] = -2;
-	} else {
-		info->m[PSC_VOLTAGE_IN] = 6720;
-		info->b[PSC_VOLTAGE_IN] = 0;
-		info->R[PSC_VOLTAGE_IN] = -1;
-		info->m[PSC_VOLTAGE_OUT] = 6720;
-		info->b[PSC_VOLTAGE_OUT] = 0;
-		info->R[PSC_VOLTAGE_OUT] = -1;
-	}
-
-	if (device_config & ADM1275_IOUT_WARN2_SELECT)
-		data->have_oc_fault = true;
-
 	switch (data->id) {
 	case adm1075:
-		info->format[PSC_POWER] = direct;
-		info->b[PSC_POWER] = 0;
-		info->R[PSC_POWER] = -1;
+		if (device_config & ADM1275_IOUT_WARN2_SELECT)
+			data->have_oc_fault = true;
+		else
+			data->have_uc_fault = true;
+		data->have_pin_max = true;
+		data->have_vaux_status = true;
+
+		coefficients = adm1075_coefficients;
+		vindex = 0;
 		switch (config & ADM1075_IRANGE_MASK) {
 		case ADM1075_IRANGE_25:
-			info->m[PSC_POWER] = 8549;
-			info->m[PSC_CURRENT_OUT] = 806;
+			cindex = 1;
+			pindex = 3;
 			break;
 		case ADM1075_IRANGE_50:
-			info->m[PSC_POWER] = 4279;
-			info->m[PSC_CURRENT_OUT] = 404;
+			cindex = 2;
+			pindex = 4;
 			break;
 		default:
 			dev_err(&client->dev, "Invalid input current range");
-			info->m[PSC_POWER] = 0;
-			info->m[PSC_CURRENT_OUT] = 0;
 			break;
 		}
+
 		info->func[0] |= PMBUS_HAVE_VIN | PMBUS_HAVE_PIN
 		  | PMBUS_HAVE_STATUS_INPUT;
 		if (config & ADM1275_VIN_VOUT_SELECT)
@@ -352,6 +424,16 @@ static int adm1275_probe(struct i2c_client *client,
 			  PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
 		break;
 	case adm1275:
+		if (device_config & ADM1275_IOUT_WARN2_SELECT)
+			data->have_oc_fault = true;
+		else
+			data->have_uc_fault = true;
+		data->have_vout = true;
+
+		coefficients = adm1275_coefficients;
+		vindex = (config & ADM1275_VRANGE) ? 0 : 1;
+		cindex = 2;
+
 		if (config & ADM1275_VIN_VOUT_SELECT)
 			info->func[0] |=
 			  PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
@@ -360,22 +442,100 @@ static int adm1275_probe(struct i2c_client *client,
 			  PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT;
 		break;
 	case adm1276:
-		info->format[PSC_POWER] = direct;
+		if (device_config & ADM1275_IOUT_WARN2_SELECT)
+			data->have_oc_fault = true;
+		else
+			data->have_uc_fault = true;
+		data->have_vout = true;
+		data->have_pin_max = true;
+
+		coefficients = adm1276_coefficients;
+		vindex = (config & ADM1275_VRANGE) ? 0 : 1;
+		cindex = 2;
+		pindex = (config & ADM1275_VRANGE) ? 3 : 4;
+
 		info->func[0] |= PMBUS_HAVE_VIN | PMBUS_HAVE_PIN
 		  | PMBUS_HAVE_STATUS_INPUT;
 		if (config & ADM1275_VIN_VOUT_SELECT)
 			info->func[0] |=
 			  PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
-		if (config & ADM1275_VRANGE) {
-			info->m[PSC_POWER] = 6043;
-			info->b[PSC_POWER] = 0;
-			info->R[PSC_POWER] = -2;
-		} else {
-			info->m[PSC_POWER] = 2115;
-			info->b[PSC_POWER] = 0;
-			info->R[PSC_POWER] = -1;
+		break;
+	case adm1293:
+	case adm1294:
+		data->have_iout_min = true;
+		data->have_pin_min = true;
+		data->have_pin_max = true;
+		data->have_mfr_vaux_status = true;
+
+		coefficients = adm1293_coefficients;
+
+		voindex = 0;
+		switch (config & ADM1293_VIN_SEL_MASK) {
+		case ADM1293_VIN_SEL_012:	/* 1.2V */
+			vindex = 0;
+			break;
+		case ADM1293_VIN_SEL_074:	/* 7.4V */
+			vindex = 1;
+			break;
+		case ADM1293_VIN_SEL_210:	/* 21V */
+			vindex = 2;
+			break;
+		default:			/* disabled */
+			break;
 		}
+
+		switch (config & ADM1293_IRANGE_MASK) {
+		case ADM1293_IRANGE_25:
+			cindex = 3;
+			break;
+		case ADM1293_IRANGE_50:
+			cindex = 4;
+			break;
+		case ADM1293_IRANGE_100:
+			cindex = 5;
+			break;
+		case ADM1293_IRANGE_200:
+			cindex = 6;
+			break;
+		}
+
+		if (vindex >= 0)
+			pindex = 7 + vindex * 4 + (cindex - 3);
+
+		if (config & ADM1293_VAUX_EN)
+			info->func[0] |=
+				PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
+
+		info->func[0] |= PMBUS_HAVE_PIN |
+			PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT;
+
 		break;
+	default:
+		dev_err(&client->dev, "Unsupported device\n");
+		return -ENODEV;
+	}
+
+	if (voindex < 0)
+		voindex = vindex;
+	if (vindex >= 0) {
+		info->m[PSC_VOLTAGE_IN] = coefficients[vindex].m;
+		info->b[PSC_VOLTAGE_IN] = coefficients[vindex].b;
+		info->R[PSC_VOLTAGE_IN] = coefficients[vindex].R;
+	}
+	if (voindex >= 0) {
+		info->m[PSC_VOLTAGE_OUT] = coefficients[voindex].m;
+		info->b[PSC_VOLTAGE_OUT] = coefficients[voindex].b;
+		info->R[PSC_VOLTAGE_OUT] = coefficients[voindex].R;
+	}
+	if (cindex >= 0) {
+		info->m[PSC_CURRENT_OUT] = coefficients[cindex].m;
+		info->b[PSC_CURRENT_OUT] = coefficients[cindex].b;
+		info->R[PSC_CURRENT_OUT] = coefficients[cindex].R;
+	}
+	if (pindex >= 0) {
+		info->m[PSC_POWER] = coefficients[pindex].m;
+		info->b[PSC_POWER] = coefficients[pindex].b;
+		info->R[PSC_POWER] = coefficients[pindex].R;
 	}
 
 	return pmbus_do_probe(client, id, info);