diff options
author | 2016-04-11 10:41:07 +0300 | |
---|---|---|
committer | 2016-04-13 08:17:18 +0300 | |
commit | e09b41010ba33a20a87472ee821fa407a5b8da36 (patch) | |
tree | d10dc367189862e7ca5c592f033dc3726e1df4e3 /kernel/drivers/gpu/drm/radeon/radeon_display.c | |
parent | f93b97fd65072de626c074dbe099a1fff05ce060 (diff) |
These changes are the raw update to linux-4.4.6-rt14. Kernel sources
are taken from kernel.org, and rt patch from the rt wiki download page.
During the rebasing, the following patch collided:
Force tick interrupt and get rid of softirq magic(I70131fb85).
Collisions have been removed because its logic was found on the
source already.
Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>
Diffstat (limited to 'kernel/drivers/gpu/drm/radeon/radeon_display.c')
-rw-r--r-- | kernel/drivers/gpu/drm/radeon/radeon_display.c | 168 |
1 files changed, 114 insertions, 54 deletions
diff --git a/kernel/drivers/gpu/drm/radeon/radeon_display.c b/kernel/drivers/gpu/drm/radeon/radeon_display.c index d2e9e9efc..642854b2e 100644 --- a/kernel/drivers/gpu/drm/radeon/radeon_display.c +++ b/kernel/drivers/gpu/drm/radeon/radeon_display.c @@ -322,8 +322,11 @@ void radeon_crtc_handle_vblank(struct radeon_device *rdev, int crtc_id) * to complete in this vblank? */ if (update_pending && - (DRM_SCANOUTPOS_VALID & radeon_get_crtc_scanoutpos(rdev->ddev, crtc_id, 0, - &vpos, &hpos, NULL, NULL)) && + (DRM_SCANOUTPOS_VALID & radeon_get_crtc_scanoutpos(rdev->ddev, + crtc_id, + USE_REAL_VBLANKSTART, + &vpos, &hpos, NULL, NULL, + &rdev->mode_info.crtcs[crtc_id]->base.hwmode)) && ((vpos >= (99 * rdev->mode_info.crtcs[crtc_id]->base.hwmode.crtc_vdisplay)/100) || (vpos < 0 && !ASIC_IS_AVIVO(rdev)))) { /* crtc didn't flip in this target vblank interval, @@ -400,6 +403,9 @@ static void radeon_flip_work_func(struct work_struct *__work) struct drm_crtc *crtc = &radeon_crtc->base; unsigned long flags; int r; + int vpos, hpos, stat, min_udelay = 0; + unsigned repcnt = 4; + struct drm_vblank_crtc *vblank = &crtc->dev->vblank[work->crtc_id]; down_read(&rdev->exclusive_lock); if (work->fence) { @@ -436,6 +442,53 @@ static void radeon_flip_work_func(struct work_struct *__work) /* set the proper interrupt */ radeon_irq_kms_pflip_irq_get(rdev, radeon_crtc->crtc_id); + /* If this happens to execute within the "virtually extended" vblank + * interval before the start of the real vblank interval then it needs + * to delay programming the mmio flip until the real vblank is entered. + * This prevents completing a flip too early due to the way we fudge + * our vblank counter and vblank timestamps in order to work around the + * problem that the hw fires vblank interrupts before actual start of + * vblank (when line buffer refilling is done for a frame). It + * complements the fudging logic in radeon_get_crtc_scanoutpos() for + * timestamping and radeon_get_vblank_counter_kms() for vblank counts. + * + * In practice this won't execute very often unless on very fast + * machines because the time window for this to happen is very small. + */ + while (radeon_crtc->enabled && --repcnt) { + /* GET_DISTANCE_TO_VBLANKSTART returns distance to real vblank + * start in hpos, and to the "fudged earlier" vblank start in + * vpos. + */ + stat = radeon_get_crtc_scanoutpos(rdev->ddev, work->crtc_id, + GET_DISTANCE_TO_VBLANKSTART, + &vpos, &hpos, NULL, NULL, + &crtc->hwmode); + + if ((stat & (DRM_SCANOUTPOS_VALID | DRM_SCANOUTPOS_ACCURATE)) != + (DRM_SCANOUTPOS_VALID | DRM_SCANOUTPOS_ACCURATE) || + !(vpos >= 0 && hpos <= 0)) + break; + + /* Sleep at least until estimated real start of hw vblank */ + min_udelay = (-hpos + 1) * max(vblank->linedur_ns / 1000, 5); + if (min_udelay > vblank->framedur_ns / 2000) { + /* Don't wait ridiculously long - something is wrong */ + repcnt = 0; + break; + } + spin_unlock_irqrestore(&crtc->dev->event_lock, flags); + usleep_range(min_udelay, 2 * min_udelay); + spin_lock_irqsave(&crtc->dev->event_lock, flags); + }; + + if (!repcnt) + DRM_DEBUG_DRIVER("Delay problem on crtc %d: min_udelay %d, " + "framedur %d, linedur %d, stat %d, vpos %d, " + "hpos %d\n", work->crtc_id, min_udelay, + vblank->framedur_ns / 1000, + vblank->linedur_ns / 1000, stat, vpos, hpos); + /* do the flip (mmio) */ radeon_page_flip(rdev, radeon_crtc->crtc_id, work->base); @@ -1633,18 +1686,8 @@ int radeon_modeset_init(struct radeon_device *rdev) radeon_fbdev_init(rdev); drm_kms_helper_poll_init(rdev->ddev); - if (rdev->pm.dpm_enabled) { - /* do dpm late init */ - ret = radeon_pm_late_init(rdev); - if (ret) { - rdev->pm.dpm_enabled = false; - DRM_ERROR("radeon_pm_late_init failed, disabling dpm\n"); - } - /* set the dpm state for PX since there won't be - * a modeset to call this. - */ - radeon_pm_compute_clocks(rdev); - } + /* do pm late init */ + ret = radeon_pm_late_init(rdev); return 0; } @@ -1777,6 +1820,15 @@ bool radeon_crtc_scaling_mode_fixup(struct drm_crtc *crtc, * \param dev Device to query. * \param crtc Crtc to query. * \param flags Flags from caller (DRM_CALLED_FROM_VBLIRQ or 0). + * For driver internal use only also supports these flags: + * + * USE_REAL_VBLANKSTART to use the real start of vblank instead + * of a fudged earlier start of vblank. + * + * GET_DISTANCE_TO_VBLANKSTART to return distance to the + * fudged earlier start of vblank in *vpos and the distance + * to true start of vblank in *hpos. + * * \param *vpos Location where vertical scanout position should be stored. * \param *hpos Location where horizontal scanout position should go. * \param *stime Target location for timestamp taken immediately before @@ -1798,8 +1850,10 @@ bool radeon_crtc_scaling_mode_fixup(struct drm_crtc *crtc, * unknown small number of scanlines wrt. real scanout position. * */ -int radeon_get_crtc_scanoutpos(struct drm_device *dev, int crtc, unsigned int flags, - int *vpos, int *hpos, ktime_t *stime, ktime_t *etime) +int radeon_get_crtc_scanoutpos(struct drm_device *dev, unsigned int pipe, + unsigned int flags, int *vpos, int *hpos, + ktime_t *stime, ktime_t *etime, + const struct drm_display_mode *mode) { u32 stat_crtc = 0, vbl = 0, position = 0; int vbl_start, vbl_end, vtotal, ret = 0; @@ -1808,48 +1862,49 @@ int radeon_get_crtc_scanoutpos(struct drm_device *dev, int crtc, unsigned int fl struct radeon_device *rdev = dev->dev_private; /* preempt_disable_rt() should go right here in PREEMPT_RT patchset. */ + preempt_disable_rt(); /* Get optional system timestamp before query. */ if (stime) *stime = ktime_get(); if (ASIC_IS_DCE4(rdev)) { - if (crtc == 0) { + if (pipe == 0) { vbl = RREG32(EVERGREEN_CRTC_V_BLANK_START_END + EVERGREEN_CRTC0_REGISTER_OFFSET); position = RREG32(EVERGREEN_CRTC_STATUS_POSITION + EVERGREEN_CRTC0_REGISTER_OFFSET); ret |= DRM_SCANOUTPOS_VALID; } - if (crtc == 1) { + if (pipe == 1) { vbl = RREG32(EVERGREEN_CRTC_V_BLANK_START_END + EVERGREEN_CRTC1_REGISTER_OFFSET); position = RREG32(EVERGREEN_CRTC_STATUS_POSITION + EVERGREEN_CRTC1_REGISTER_OFFSET); ret |= DRM_SCANOUTPOS_VALID; } - if (crtc == 2) { + if (pipe == 2) { vbl = RREG32(EVERGREEN_CRTC_V_BLANK_START_END + EVERGREEN_CRTC2_REGISTER_OFFSET); position = RREG32(EVERGREEN_CRTC_STATUS_POSITION + EVERGREEN_CRTC2_REGISTER_OFFSET); ret |= DRM_SCANOUTPOS_VALID; } - if (crtc == 3) { + if (pipe == 3) { vbl = RREG32(EVERGREEN_CRTC_V_BLANK_START_END + EVERGREEN_CRTC3_REGISTER_OFFSET); position = RREG32(EVERGREEN_CRTC_STATUS_POSITION + EVERGREEN_CRTC3_REGISTER_OFFSET); ret |= DRM_SCANOUTPOS_VALID; } - if (crtc == 4) { + if (pipe == 4) { vbl = RREG32(EVERGREEN_CRTC_V_BLANK_START_END + EVERGREEN_CRTC4_REGISTER_OFFSET); position = RREG32(EVERGREEN_CRTC_STATUS_POSITION + EVERGREEN_CRTC4_REGISTER_OFFSET); ret |= DRM_SCANOUTPOS_VALID; } - if (crtc == 5) { + if (pipe == 5) { vbl = RREG32(EVERGREEN_CRTC_V_BLANK_START_END + EVERGREEN_CRTC5_REGISTER_OFFSET); position = RREG32(EVERGREEN_CRTC_STATUS_POSITION + @@ -1857,19 +1912,19 @@ int radeon_get_crtc_scanoutpos(struct drm_device *dev, int crtc, unsigned int fl ret |= DRM_SCANOUTPOS_VALID; } } else if (ASIC_IS_AVIVO(rdev)) { - if (crtc == 0) { + if (pipe == 0) { vbl = RREG32(AVIVO_D1CRTC_V_BLANK_START_END); position = RREG32(AVIVO_D1CRTC_STATUS_POSITION); ret |= DRM_SCANOUTPOS_VALID; } - if (crtc == 1) { + if (pipe == 1) { vbl = RREG32(AVIVO_D2CRTC_V_BLANK_START_END); position = RREG32(AVIVO_D2CRTC_STATUS_POSITION); ret |= DRM_SCANOUTPOS_VALID; } } else { /* Pre-AVIVO: Different encoding of scanout pos and vblank interval. */ - if (crtc == 0) { + if (pipe == 0) { /* Assume vbl_end == 0, get vbl_start from * upper 16 bits. */ @@ -1883,7 +1938,7 @@ int radeon_get_crtc_scanoutpos(struct drm_device *dev, int crtc, unsigned int fl ret |= DRM_SCANOUTPOS_VALID; } - if (crtc == 1) { + if (pipe == 1) { vbl = (RREG32(RADEON_CRTC2_V_TOTAL_DISP) & RADEON_CRTC_V_DISP) >> RADEON_CRTC_V_DISP_SHIFT; position = (RREG32(RADEON_CRTC2_VLINE_CRNT_VLINE) >> 16) & RADEON_CRTC_V_TOTAL; @@ -1900,6 +1955,7 @@ int radeon_get_crtc_scanoutpos(struct drm_device *dev, int crtc, unsigned int fl *etime = ktime_get(); /* preempt_enable_rt() should go right here in PREEMPT_RT patchset. */ + preempt_enable_rt(); /* Decode into vertical and horizontal scanout position. */ *vpos = position & 0x1fff; @@ -1914,14 +1970,44 @@ int radeon_get_crtc_scanoutpos(struct drm_device *dev, int crtc, unsigned int fl } else { /* No: Fake something reasonable which gives at least ok results. */ - vbl_start = rdev->mode_info.crtcs[crtc]->base.hwmode.crtc_vdisplay; + vbl_start = mode->crtc_vdisplay; vbl_end = 0; } + /* Called from driver internal vblank counter query code? */ + if (flags & GET_DISTANCE_TO_VBLANKSTART) { + /* Caller wants distance from real vbl_start in *hpos */ + *hpos = *vpos - vbl_start; + } + + /* Fudge vblank to start a few scanlines earlier to handle the + * problem that vblank irqs fire a few scanlines before start + * of vblank. Some driver internal callers need the true vblank + * start to be used and signal this via the USE_REAL_VBLANKSTART flag. + * + * The cause of the "early" vblank irq is that the irq is triggered + * by the line buffer logic when the line buffer read position enters + * the vblank, whereas our crtc scanout position naturally lags the + * line buffer read position. + */ + if (!(flags & USE_REAL_VBLANKSTART)) + vbl_start -= rdev->mode_info.crtcs[pipe]->lb_vblank_lead_lines; + /* Test scanout position against vblank region. */ if ((*vpos < vbl_start) && (*vpos >= vbl_end)) in_vbl = false; + /* In vblank? */ + if (in_vbl) + ret |= DRM_SCANOUTPOS_IN_VBLANK; + + /* Called from driver internal vblank counter query code? */ + if (flags & GET_DISTANCE_TO_VBLANKSTART) { + /* Caller wants distance from fudged earlier vbl_start */ + *vpos -= vbl_start; + return ret; + } + /* Check if inside vblank area and apply corrective offsets: * vpos will then be >=0 in video scanout area, but negative * within vblank area, counting down the number of lines until @@ -1930,38 +2016,12 @@ int radeon_get_crtc_scanoutpos(struct drm_device *dev, int crtc, unsigned int fl /* Inside "upper part" of vblank area? Apply corrective offset if so: */ if (in_vbl && (*vpos >= vbl_start)) { - vtotal = rdev->mode_info.crtcs[crtc]->base.hwmode.crtc_vtotal; + vtotal = mode->crtc_vtotal; *vpos = *vpos - vtotal; } /* Correct for shifted end of vbl at vbl_end. */ *vpos = *vpos - vbl_end; - /* In vblank? */ - if (in_vbl) - ret |= DRM_SCANOUTPOS_IN_VBLANK; - - /* Is vpos outside nominal vblank area, but less than - * 1/100 of a frame height away from start of vblank? - * If so, assume this isn't a massively delayed vblank - * interrupt, but a vblank interrupt that fired a few - * microseconds before true start of vblank. Compensate - * by adding a full frame duration to the final timestamp. - * Happens, e.g., on ATI R500, R600. - * - * We only do this if DRM_CALLED_FROM_VBLIRQ. - */ - if ((flags & DRM_CALLED_FROM_VBLIRQ) && !in_vbl) { - vbl_start = rdev->mode_info.crtcs[crtc]->base.hwmode.crtc_vdisplay; - vtotal = rdev->mode_info.crtcs[crtc]->base.hwmode.crtc_vtotal; - - if (vbl_start - *vpos < vtotal / 100) { - *vpos -= vtotal; - - /* Signal this correction as "applied". */ - ret |= 0x8; - } - } - return ret; } |