These changes are a raw update to a vanilla kernel 4.1.10, with the

recently announced rt patch patch-4.1.10-rt10.patch. No further changes
needed.

Change-Id: I9a0cf084498133b10771e744b6da4b29dff706ba
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>

6 files changed, 42 insertions, 34 deletions

diff --git a/kernel/drivers/gpu/drm/i915/i915_drv.c b/kernel/drivers/gpu/drm/i915/i915_drv.c
index a19d2c71e..fb91df163 100644
--- a/kernel/drivers/gpu/drm/i915/i915_drv.c
+++ b/kernel/drivers/gpu/drm/i915/i915_drv.c
@@ -647,15 +647,18 @@ static int i915_drm_suspend_late(struct drm_device *drm_dev, bool hibernation)
 
 	pci_disable_device(drm_dev->pdev);
 	/*
-	 * During hibernation on some GEN4 platforms the BIOS may try to access
+	 * During hibernation on some platforms the BIOS may try to access
 	 * the device even though it's already in D3 and hang the machine. So
 	 * leave the device in D0 on those platforms and hope the BIOS will
-	 * power down the device properly. Platforms where this was seen:
-	 * Lenovo Thinkpad X301, X61s
+	 * power down the device properly. The issue was seen on multiple old
+	 * GENs with different BIOS vendors, so having an explicit blacklist
+	 * is inpractical; apply the workaround on everything pre GEN6. The
+	 * platforms where the issue was seen:
+	 * Lenovo Thinkpad X301, X61s, X60, T60, X41
+	 * Fujitsu FSC S7110
+	 * Acer Aspire 1830T
 	 */
-	if (!(hibernation &&
-	      drm_dev->pdev->subsystem_vendor == PCI_VENDOR_ID_LENOVO &&
-	      INTEL_INFO(dev_priv)->gen == 4))
+	if (!(hibernation && INTEL_INFO(dev_priv)->gen < 6))
 		pci_set_power_state(drm_dev->pdev, PCI_D3hot);
 
 	return 0;
diff --git a/kernel/drivers/gpu/drm/i915/i915_drv.h b/kernel/drivers/gpu/drm/i915/i915_drv.h
index 683a9b004..7d53d7e15 100644
--- a/kernel/drivers/gpu/drm/i915/i915_drv.h
+++ b/kernel/drivers/gpu/drm/i915/i915_drv.h
@@ -3190,13 +3190,13 @@ int intel_freq_opcode(struct drm_i915_private *dev_priv, int val);
 #define I915_READ64(reg)	dev_priv->uncore.funcs.mmio_readq(dev_priv, (reg), true)
 
 #define I915_READ64_2x32(lower_reg, upper_reg) ({			\
-	u32 upper, lower, tmp;						\
-	tmp = I915_READ(upper_reg);					\
+	u32 upper, lower, old_upper, loop = 0;				\
+	upper = I915_READ(upper_reg);					\
 	do {								\
-		upper = tmp;						\
+		old_upper = upper;					\
 		lower = I915_READ(lower_reg);				\
-		tmp = I915_READ(upper_reg);				\
-	} while (upper != tmp);						\
+		upper = I915_READ(upper_reg);				\
+	} while (upper != old_upper && loop++ < 2);			\
 	(u64)upper << 32 | lower; })
 
 #define POSTING_READ(reg)	(void)I915_READ_NOTRACE(reg)
diff --git a/kernel/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/kernel/drivers/gpu/drm/i915/i915_gem_execbuffer.c
index a3eadb970..a67a351e8 100644
--- a/kernel/drivers/gpu/drm/i915/i915_gem_execbuffer.c
+++ b/kernel/drivers/gpu/drm/i915/i915_gem_execbuffer.c
@@ -1026,6 +1026,7 @@ i915_gem_execbuffer_move_to_active(struct list_head *vmas,
 		u32 old_read = obj->base.read_domains;
 		u32 old_write = obj->base.write_domain;
 
+		obj->dirty = 1; /* be paranoid  */
 		obj->base.write_domain = obj->base.pending_write_domain;
 		if (obj->base.write_domain == 0)
 			obj->base.pending_read_domains |= obj->base.read_domains;
@@ -1033,7 +1034,6 @@ i915_gem_execbuffer_move_to_active(struct list_head *vmas,
 
 		i915_vma_move_to_active(vma, ring);
 		if (obj->base.write_domain) {
-			obj->dirty = 1;
 			i915_gem_request_assign(&obj->last_write_req, req);
 
 			intel_fb_obj_invalidate(obj, ring, ORIGIN_CS);
diff --git a/kernel/drivers/gpu/drm/i915/intel_display.c b/kernel/drivers/gpu/drm/i915/intel_display.c
index 4021633ca..338d1de57 100644
--- a/kernel/drivers/gpu/drm/i915/intel_display.c
+++ b/kernel/drivers/gpu/drm/i915/intel_display.c
@@ -13781,6 +13781,24 @@ void intel_modeset_init(struct drm_device *dev)
 	if (INTEL_INFO(dev)->num_pipes == 0)
 		return;
 
+	/*
+	 * There may be no VBT; and if the BIOS enabled SSC we can
+	 * just keep using it to avoid unnecessary flicker.  Whereas if the
+	 * BIOS isn't using it, don't assume it will work even if the VBT
+	 * indicates as much.
+	 */
+	if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) {
+		bool bios_lvds_use_ssc = !!(I915_READ(PCH_DREF_CONTROL) &
+					    DREF_SSC1_ENABLE);
+
+		if (dev_priv->vbt.lvds_use_ssc != bios_lvds_use_ssc) {
+			DRM_DEBUG_KMS("SSC %sabled by BIOS, overriding VBT which says %sabled\n",
+				     bios_lvds_use_ssc ? "en" : "dis",
+				     dev_priv->vbt.lvds_use_ssc ? "en" : "dis");
+			dev_priv->vbt.lvds_use_ssc = bios_lvds_use_ssc;
+		}
+	}
+
 	intel_init_display(dev);
 	intel_init_audio(dev);
 
@@ -14266,7 +14284,6 @@ void intel_modeset_setup_hw_state(struct drm_device *dev,
 
 void intel_modeset_gem_init(struct drm_device *dev)
 {
-	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct drm_crtc *c;
 	struct drm_i915_gem_object *obj;
 	int ret;
@@ -14275,16 +14292,6 @@ void intel_modeset_gem_init(struct drm_device *dev)
 	intel_init_gt_powersave(dev);
 	mutex_unlock(&dev->struct_mutex);
 
-	/*
-	 * There may be no VBT; and if the BIOS enabled SSC we can
-	 * just keep using it to avoid unnecessary flicker.  Whereas if the
-	 * BIOS isn't using it, don't assume it will work even if the VBT
-	 * indicates as much.
-	 */
-	if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev))
-		dev_priv->vbt.lvds_use_ssc = !!(I915_READ(PCH_DREF_CONTROL) &
-						DREF_SSC1_ENABLE);
-
 	intel_modeset_init_hw(dev);
 
 	intel_setup_overlay(dev);
diff --git a/kernel/drivers/gpu/drm/i915/intel_dp.c b/kernel/drivers/gpu/drm/i915/intel_dp.c
index b1fe32b11..fb2983f77 100644
--- a/kernel/drivers/gpu/drm/i915/intel_dp.c
+++ b/kernel/drivers/gpu/drm/i915/intel_dp.c
@@ -4691,9 +4691,12 @@ intel_dp_hpd_pulse(struct intel_digital_port *intel_dig_port, bool long_hpd)
 
 		intel_dp_probe_oui(intel_dp);
 
-		if (!intel_dp_probe_mst(intel_dp))
+		if (!intel_dp_probe_mst(intel_dp)) {
+			drm_modeset_lock(&dev->mode_config.connection_mutex, NULL);
+			intel_dp_check_link_status(intel_dp);
+			drm_modeset_unlock(&dev->mode_config.connection_mutex);
 			goto mst_fail;
-
+		}
 	} else {
 		if (intel_dp->is_mst) {
 			if (intel_dp_check_mst_status(intel_dp) == -EINVAL)
@@ -4701,10 +4704,6 @@ intel_dp_hpd_pulse(struct intel_digital_port *intel_dig_port, bool long_hpd)
 		}
 
 		if (!intel_dp->is_mst) {
-			/*
-			 * we'll check the link status via the normal hot plug path later -
-			 * but for short hpds we should check it now
-			 */
 			drm_modeset_lock(&dev->mode_config.connection_mutex, NULL);
 			intel_dp_check_link_status(intel_dp);
 			drm_modeset_unlock(&dev->mode_config.connection_mutex);
diff --git a/kernel/drivers/gpu/drm/i915/intel_dsi.c b/kernel/drivers/gpu/drm/i915/intel_dsi.c
index 51966426a..c7a0b8d8f 100644
--- a/kernel/drivers/gpu/drm/i915/intel_dsi.c
+++ b/kernel/drivers/gpu/drm/i915/intel_dsi.c
@@ -1036,11 +1036,7 @@ void intel_dsi_init(struct drm_device *dev)
 	intel_connector->unregister = intel_connector_unregister;
 
 	/* Pipe A maps to MIPI DSI port A, pipe B maps to MIPI DSI port C */
-	if (dev_priv->vbt.dsi.config->dual_link) {
-		/* XXX: does dual link work on either pipe? */
-		intel_encoder->crtc_mask = (1 << PIPE_A);
-		intel_dsi->ports = ((1 << PORT_A) | (1 << PORT_C));
-	} else if (dev_priv->vbt.dsi.port == DVO_PORT_MIPIA) {
+	if (dev_priv->vbt.dsi.port == DVO_PORT_MIPIA) {
 		intel_encoder->crtc_mask = (1 << PIPE_A);
 		intel_dsi->ports = (1 << PORT_A);
 	} else if (dev_priv->vbt.dsi.port == DVO_PORT_MIPIC) {
@@ -1048,6 +1044,9 @@ void intel_dsi_init(struct drm_device *dev)
 		intel_dsi->ports = (1 << PORT_C);
 	}
 
+	if (dev_priv->vbt.dsi.config->dual_link)
+		intel_dsi->ports = ((1 << PORT_A) | (1 << PORT_C));
+
 	/* Create a DSI host (and a device) for each port. */
 	for_each_dsi_port(port, intel_dsi->ports) {
 		struct intel_dsi_host *host;