These changes are the raw update to linux-4.4.6-rt14. Kernel sources

are taken from kernel.org, and rt patch from the rt wiki download page.

During the rebasing, the following patch collided:

Force tick interrupt and get rid of softirq magic(I70131fb85).

Collisions have been removed because its logic was found on the
source already.

Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>

1 files changed, 37 insertions, 25 deletions

diff --git a/kernel/drivers/gpu/drm/i915/i915_params.c b/kernel/drivers/gpu/drm/i915/i915_params.c
index bb64415a1..4be13a5eb 100644
--- a/kernel/drivers/gpu/drm/i915/i915_params.c
+++ b/kernel/drivers/gpu/drm/i915/i915_params.c
@@ -28,7 +28,6 @@ struct i915_params i915 __read_mostly = {
 	.modeset = -1,
 	.panel_ignore_lid = 1,
 	.semaphores = -1,
-	.lvds_downclock = 0,
 	.lvds_channel_mode = 0,
 	.panel_use_ssc = -1,
 	.vbt_sdvo_panel_type = -1,
@@ -39,7 +38,7 @@ struct i915_params i915 __read_mostly = {
 	.enable_ppgtt = -1,
 	.enable_psr = 0,
 	.preliminary_hw_support = IS_ENABLED(CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT),
-	.disable_power_well = 1,
+	.disable_power_well = -1,
 	.enable_ips = 1,
 	.fastboot = 0,
 	.prefault_disable = 0,
@@ -53,14 +52,17 @@ struct i915_params i915 __read_mostly = {
 	.mmio_debug = 0,
 	.verbose_state_checks = 1,
 	.nuclear_pageflip = 0,
+	.edp_vswing = 0,
+	.enable_guc_submission = false,
+	.guc_log_level = -1,
 };
 
 module_param_named(modeset, i915.modeset, int, 0400);
 MODULE_PARM_DESC(modeset,
-	"Use kernel modesetting [KMS] (0=DRM_I915_KMS from .config, "
+	"Use kernel modesetting [KMS] (0=disable, "
 	"1=on, -1=force vga console preference [default])");
 
-module_param_named(panel_ignore_lid, i915.panel_ignore_lid, int, 0600);
+module_param_named_unsafe(panel_ignore_lid, i915.panel_ignore_lid, int, 0600);
 MODULE_PARM_DESC(panel_ignore_lid,
 	"Override lid status (0=autodetect, 1=autodetect disabled [default], "
 	"-1=force lid closed, -2=force lid open)");
@@ -83,30 +85,25 @@ MODULE_PARM_DESC(enable_fbc,
 	"Enable frame buffer compression for power savings "
 	"(default: -1 (use per-chip default))");
 
-module_param_named(lvds_downclock, i915.lvds_downclock, int, 0400);
-MODULE_PARM_DESC(lvds_downclock,
-	"Use panel (LVDS/eDP) downclocking for power savings "
-	"(default: false)");
-
-module_param_named(lvds_channel_mode, i915.lvds_channel_mode, int, 0600);
+module_param_named_unsafe(lvds_channel_mode, i915.lvds_channel_mode, int, 0600);
 MODULE_PARM_DESC(lvds_channel_mode,
 	 "Specify LVDS channel mode "
 	 "(0=probe BIOS [default], 1=single-channel, 2=dual-channel)");
 
-module_param_named(lvds_use_ssc, i915.panel_use_ssc, int, 0600);
+module_param_named_unsafe(lvds_use_ssc, i915.panel_use_ssc, int, 0600);
 MODULE_PARM_DESC(lvds_use_ssc,
 	"Use Spread Spectrum Clock with panels [LVDS/eDP] "
 	"(default: auto from VBT)");
 
-module_param_named(vbt_sdvo_panel_type, i915.vbt_sdvo_panel_type, int, 0600);
+module_param_named_unsafe(vbt_sdvo_panel_type, i915.vbt_sdvo_panel_type, int, 0600);
 MODULE_PARM_DESC(vbt_sdvo_panel_type,
 	"Override/Ignore selection of SDVO panel mode in the VBT "
 	"(-2=ignore, -1=auto [default], index in VBT BIOS table)");
 
-module_param_named(reset, i915.reset, bool, 0600);
+module_param_named_unsafe(reset, i915.reset, bool, 0600);
 MODULE_PARM_DESC(reset, "Attempt GPU resets (default: true)");
 
-module_param_named(enable_hangcheck, i915.enable_hangcheck, bool, 0644);
+module_param_named_unsafe(enable_hangcheck, i915.enable_hangcheck, bool, 0644);
 MODULE_PARM_DESC(enable_hangcheck,
 	"Periodically check GPU activity for detecting hangs. "
 	"WARNING: Disabling this can cause system wide hangs. "
@@ -117,23 +114,24 @@ MODULE_PARM_DESC(enable_ppgtt,
 	"Override PPGTT usage. "
 	"(-1=auto [default], 0=disabled, 1=aliasing, 2=full)");
 
-module_param_named(enable_execlists, i915.enable_execlists, int, 0400);
+module_param_named_unsafe(enable_execlists, i915.enable_execlists, int, 0400);
 MODULE_PARM_DESC(enable_execlists,
 	"Override execlists usage. "
 	"(-1=auto [default], 0=disabled, 1=enabled)");
 
-module_param_named(enable_psr, i915.enable_psr, int, 0600);
+module_param_named_unsafe(enable_psr, i915.enable_psr, int, 0600);
 MODULE_PARM_DESC(enable_psr, "Enable PSR (default: false)");
 
-module_param_named(preliminary_hw_support, i915.preliminary_hw_support, int, 0600);
+module_param_named_unsafe(preliminary_hw_support, i915.preliminary_hw_support, int, 0600);
 MODULE_PARM_DESC(preliminary_hw_support,
 	"Enable preliminary hardware support.");
 
-module_param_named(disable_power_well, i915.disable_power_well, int, 0600);
+module_param_named_unsafe(disable_power_well, i915.disable_power_well, int, 0600);
 MODULE_PARM_DESC(disable_power_well,
-	"Disable the power well when possible (default: true)");
+	"Disable display power wells when possible "
+	"(-1=auto [default], 0=power wells always on, 1=power wells disabled when possible)");
 
-module_param_named(enable_ips, i915.enable_ips, int, 0600);
+module_param_named_unsafe(enable_ips, i915.enable_ips, int, 0600);
 MODULE_PARM_DESC(enable_ips, "Enable IPS (default: true)");
 
 module_param_named(fastboot, i915.fastboot, bool, 0600);
@@ -150,7 +148,7 @@ MODULE_PARM_DESC(load_detect_test,
 	"Force-enable the VGA load detect code for testing (default:false). "
 	"For developers only.");
 
-module_param_named(invert_brightness, i915.invert_brightness, int, 0600);
+module_param_named_unsafe(invert_brightness, i915.invert_brightness, int, 0600);
 MODULE_PARM_DESC(invert_brightness,
 	"Invert backlight brightness "
 	"(-1 force normal, 0 machine defaults, 1 force inversion), please "
@@ -161,14 +159,14 @@ MODULE_PARM_DESC(invert_brightness,
 module_param_named(disable_display, i915.disable_display, bool, 0600);
 MODULE_PARM_DESC(disable_display, "Disable display (default: false)");
 
-module_param_named(disable_vtd_wa, i915.disable_vtd_wa, bool, 0600);
+module_param_named_unsafe(disable_vtd_wa, i915.disable_vtd_wa, bool, 0600);
 MODULE_PARM_DESC(disable_vtd_wa, "Disable all VT-d workarounds (default: false)");
 
-module_param_named(enable_cmd_parser, i915.enable_cmd_parser, int, 0600);
+module_param_named_unsafe(enable_cmd_parser, i915.enable_cmd_parser, int, 0600);
 MODULE_PARM_DESC(enable_cmd_parser,
 		 "Enable command parsing (1=enabled [default], 0=disabled)");
 
-module_param_named(use_mmio_flip, i915.use_mmio_flip, int, 0600);
+module_param_named_unsafe(use_mmio_flip, i915.use_mmio_flip, int, 0600);
 MODULE_PARM_DESC(use_mmio_flip,
 		 "use MMIO flips (-1=never, 0=driver discretion [default], 1=always)");
 
@@ -183,4 +181,18 @@ MODULE_PARM_DESC(verbose_state_checks,
 
 module_param_named_unsafe(nuclear_pageflip, i915.nuclear_pageflip, bool, 0600);
 MODULE_PARM_DESC(nuclear_pageflip,
-		 "Force atomic modeset functionality; only planes work for now (default: false).");
+		 "Force atomic modeset functionality; asynchronous mode is not yet supported. (default: false).");
+
+/* WA to get away with the default setting in VBT for early platforms.Will be removed */
+module_param_named_unsafe(edp_vswing, i915.edp_vswing, int, 0400);
+MODULE_PARM_DESC(edp_vswing,
+		 "Ignore/Override vswing pre-emph table selection from VBT "
+		 "(0=use value from vbt [default], 1=low power swing(200mV),"
+		 "2=default swing(400mV))");
+
+module_param_named_unsafe(enable_guc_submission, i915.enable_guc_submission, bool, 0400);
+MODULE_PARM_DESC(enable_guc_submission, "Enable GuC submission (default:false)");
+
+module_param_named(guc_log_level, i915.guc_log_level, int, 0400);
+MODULE_PARM_DESC(guc_log_level,
+	"GuC firmware logging level (-1:disabled (default), 0-3:enabled)");