summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/fpga/zynq-fpga.c
diff options
context:
space:
mode:
authorJosé Pekkarinen <jose.pekkarinen@nokia.com>2016-04-11 10:41:07 +0300
committerJosé Pekkarinen <jose.pekkarinen@nokia.com>2016-04-13 08:17:18 +0300
commite09b41010ba33a20a87472ee821fa407a5b8da36 (patch)
treed10dc367189862e7ca5c592f033dc3726e1df4e3 /kernel/drivers/fpga/zynq-fpga.c
parentf93b97fd65072de626c074dbe099a1fff05ce060 (diff)
These changes are the raw update to linux-4.4.6-rt14. Kernel sources
are taken from kernel.org, and rt patch from the rt wiki download page. During the rebasing, the following patch collided: Force tick interrupt and get rid of softirq magic(I70131fb85). Collisions have been removed because its logic was found on the source already. Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769 Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>
Diffstat (limited to 'kernel/drivers/fpga/zynq-fpga.c')
-rw-r--r--kernel/drivers/fpga/zynq-fpga.c514
1 files changed, 514 insertions, 0 deletions
diff --git a/kernel/drivers/fpga/zynq-fpga.c b/kernel/drivers/fpga/zynq-fpga.c
new file mode 100644
index 000000000..c2fb4120b
--- /dev/null
+++ b/kernel/drivers/fpga/zynq-fpga.c
@@ -0,0 +1,514 @@
+/*
+ * Copyright (c) 2011-2015 Xilinx Inc.
+ * Copyright (c) 2015, National Instruments Corp.
+ *
+ * FPGA Manager Driver for Xilinx Zynq, heavily based on xdevcfg driver
+ * in their vendor tree.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/fpga/fpga-mgr.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/pm.h>
+#include <linux/regmap.h>
+#include <linux/string.h>
+
+/* Offsets into SLCR regmap */
+
+/* FPGA Software Reset Control */
+#define SLCR_FPGA_RST_CTRL_OFFSET 0x240
+/* Level Shifters Enable */
+#define SLCR_LVL_SHFTR_EN_OFFSET 0x900
+
+/* Constant Definitions */
+
+/* Control Register */
+#define CTRL_OFFSET 0x00
+/* Lock Register */
+#define LOCK_OFFSET 0x04
+/* Interrupt Status Register */
+#define INT_STS_OFFSET 0x0c
+/* Interrupt Mask Register */
+#define INT_MASK_OFFSET 0x10
+/* Status Register */
+#define STATUS_OFFSET 0x14
+/* DMA Source Address Register */
+#define DMA_SRC_ADDR_OFFSET 0x18
+/* DMA Destination Address Reg */
+#define DMA_DST_ADDR_OFFSET 0x1c
+/* DMA Source Transfer Length */
+#define DMA_SRC_LEN_OFFSET 0x20
+/* DMA Destination Transfer */
+#define DMA_DEST_LEN_OFFSET 0x24
+/* Unlock Register */
+#define UNLOCK_OFFSET 0x34
+/* Misc. Control Register */
+#define MCTRL_OFFSET 0x80
+
+/* Control Register Bit definitions */
+
+/* Signal to reset FPGA */
+#define CTRL_PCFG_PROG_B_MASK BIT(30)
+/* Enable PCAP for PR */
+#define CTRL_PCAP_PR_MASK BIT(27)
+/* Enable PCAP */
+#define CTRL_PCAP_MODE_MASK BIT(26)
+
+/* Miscellaneous Control Register bit definitions */
+/* Internal PCAP loopback */
+#define MCTRL_PCAP_LPBK_MASK BIT(4)
+
+/* Status register bit definitions */
+
+/* FPGA init status */
+#define STATUS_DMA_Q_F BIT(31)
+#define STATUS_PCFG_INIT_MASK BIT(4)
+
+/* Interrupt Status/Mask Register Bit definitions */
+/* DMA command done */
+#define IXR_DMA_DONE_MASK BIT(13)
+/* DMA and PCAP cmd done */
+#define IXR_D_P_DONE_MASK BIT(12)
+ /* FPGA programmed */
+#define IXR_PCFG_DONE_MASK BIT(2)
+#define IXR_ERROR_FLAGS_MASK 0x00F0F860
+#define IXR_ALL_MASK 0xF8F7F87F
+
+/* Miscellaneous constant values */
+
+/* Invalid DMA addr */
+#define DMA_INVALID_ADDRESS GENMASK(31, 0)
+/* Used to unlock the dev */
+#define UNLOCK_MASK 0x757bdf0d
+/* Timeout for DMA to complete */
+#define DMA_DONE_TIMEOUT msecs_to_jiffies(1000)
+/* Timeout for polling reset bits */
+#define INIT_POLL_TIMEOUT 2500000
+/* Delay for polling reset bits */
+#define INIT_POLL_DELAY 20
+
+/* Masks for controlling stuff in SLCR */
+/* Disable all Level shifters */
+#define LVL_SHFTR_DISABLE_ALL_MASK 0x0
+/* Enable Level shifters from PS to PL */
+#define LVL_SHFTR_ENABLE_PS_TO_PL 0xa
+/* Enable Level shifters from PL to PS */
+#define LVL_SHFTR_ENABLE_PL_TO_PS 0xf
+/* Enable global resets */
+#define FPGA_RST_ALL_MASK 0xf
+/* Disable global resets */
+#define FPGA_RST_NONE_MASK 0x0
+
+struct zynq_fpga_priv {
+ struct device *dev;
+ int irq;
+ struct clk *clk;
+
+ void __iomem *io_base;
+ struct regmap *slcr;
+
+ struct completion dma_done;
+};
+
+static inline void zynq_fpga_write(struct zynq_fpga_priv *priv, u32 offset,
+ u32 val)
+{
+ writel(val, priv->io_base + offset);
+}
+
+static inline u32 zynq_fpga_read(const struct zynq_fpga_priv *priv,
+ u32 offset)
+{
+ return readl(priv->io_base + offset);
+}
+
+#define zynq_fpga_poll_timeout(priv, addr, val, cond, sleep_us, timeout_us) \
+ readl_poll_timeout(priv->io_base + addr, val, cond, sleep_us, \
+ timeout_us)
+
+static void zynq_fpga_mask_irqs(struct zynq_fpga_priv *priv)
+{
+ u32 intr_mask;
+
+ intr_mask = zynq_fpga_read(priv, INT_MASK_OFFSET);
+ zynq_fpga_write(priv, INT_MASK_OFFSET,
+ intr_mask | IXR_DMA_DONE_MASK | IXR_ERROR_FLAGS_MASK);
+}
+
+static void zynq_fpga_unmask_irqs(struct zynq_fpga_priv *priv)
+{
+ u32 intr_mask;
+
+ intr_mask = zynq_fpga_read(priv, INT_MASK_OFFSET);
+ zynq_fpga_write(priv, INT_MASK_OFFSET,
+ intr_mask
+ & ~(IXR_D_P_DONE_MASK | IXR_ERROR_FLAGS_MASK));
+}
+
+static irqreturn_t zynq_fpga_isr(int irq, void *data)
+{
+ struct zynq_fpga_priv *priv = data;
+
+ /* disable DMA and error IRQs */
+ zynq_fpga_mask_irqs(priv);
+
+ complete(&priv->dma_done);
+
+ return IRQ_HANDLED;
+}
+
+static int zynq_fpga_ops_write_init(struct fpga_manager *mgr, u32 flags,
+ const char *buf, size_t count)
+{
+ struct zynq_fpga_priv *priv;
+ u32 ctrl, status;
+ int err;
+
+ priv = mgr->priv;
+
+ err = clk_enable(priv->clk);
+ if (err)
+ return err;
+
+ /* don't globally reset PL if we're doing partial reconfig */
+ if (!(flags & FPGA_MGR_PARTIAL_RECONFIG)) {
+ /* assert AXI interface resets */
+ regmap_write(priv->slcr, SLCR_FPGA_RST_CTRL_OFFSET,
+ FPGA_RST_ALL_MASK);
+
+ /* disable all level shifters */
+ regmap_write(priv->slcr, SLCR_LVL_SHFTR_EN_OFFSET,
+ LVL_SHFTR_DISABLE_ALL_MASK);
+ /* enable level shifters from PS to PL */
+ regmap_write(priv->slcr, SLCR_LVL_SHFTR_EN_OFFSET,
+ LVL_SHFTR_ENABLE_PS_TO_PL);
+
+ /* create a rising edge on PCFG_INIT. PCFG_INIT follows
+ * PCFG_PROG_B, so we need to poll it after setting PCFG_PROG_B
+ * to make sure the rising edge actually happens.
+ * Note: PCFG_PROG_B is low active, sequence as described in
+ * UG585 v1.10 page 211
+ */
+ ctrl = zynq_fpga_read(priv, CTRL_OFFSET);
+ ctrl |= CTRL_PCFG_PROG_B_MASK;
+
+ zynq_fpga_write(priv, CTRL_OFFSET, ctrl);
+
+ err = zynq_fpga_poll_timeout(priv, STATUS_OFFSET, status,
+ status & STATUS_PCFG_INIT_MASK,
+ INIT_POLL_DELAY,
+ INIT_POLL_TIMEOUT);
+ if (err) {
+ dev_err(priv->dev, "Timeout waiting for PCFG_INIT");
+ goto out_err;
+ }
+
+ ctrl = zynq_fpga_read(priv, CTRL_OFFSET);
+ ctrl &= ~CTRL_PCFG_PROG_B_MASK;
+
+ zynq_fpga_write(priv, CTRL_OFFSET, ctrl);
+
+ err = zynq_fpga_poll_timeout(priv, STATUS_OFFSET, status,
+ !(status & STATUS_PCFG_INIT_MASK),
+ INIT_POLL_DELAY,
+ INIT_POLL_TIMEOUT);
+ if (err) {
+ dev_err(priv->dev, "Timeout waiting for !PCFG_INIT");
+ goto out_err;
+ }
+
+ ctrl = zynq_fpga_read(priv, CTRL_OFFSET);
+ ctrl |= CTRL_PCFG_PROG_B_MASK;
+
+ zynq_fpga_write(priv, CTRL_OFFSET, ctrl);
+
+ err = zynq_fpga_poll_timeout(priv, STATUS_OFFSET, status,
+ status & STATUS_PCFG_INIT_MASK,
+ INIT_POLL_DELAY,
+ INIT_POLL_TIMEOUT);
+ if (err) {
+ dev_err(priv->dev, "Timeout waiting for PCFG_INIT");
+ goto out_err;
+ }
+ }
+
+ /* set configuration register with following options:
+ * - enable PCAP interface
+ * - set throughput for maximum speed
+ * - set CPU in user mode
+ */
+ ctrl = zynq_fpga_read(priv, CTRL_OFFSET);
+ zynq_fpga_write(priv, CTRL_OFFSET,
+ (CTRL_PCAP_PR_MASK | CTRL_PCAP_MODE_MASK | ctrl));
+
+ /* check that we have room in the command queue */
+ status = zynq_fpga_read(priv, STATUS_OFFSET);
+ if (status & STATUS_DMA_Q_F) {
+ dev_err(priv->dev, "DMA command queue full");
+ err = -EBUSY;
+ goto out_err;
+ }
+
+ /* ensure internal PCAP loopback is disabled */
+ ctrl = zynq_fpga_read(priv, MCTRL_OFFSET);
+ zynq_fpga_write(priv, MCTRL_OFFSET, (~MCTRL_PCAP_LPBK_MASK & ctrl));
+
+ clk_disable(priv->clk);
+
+ return 0;
+
+out_err:
+ clk_disable(priv->clk);
+
+ return err;
+}
+
+static int zynq_fpga_ops_write(struct fpga_manager *mgr,
+ const char *buf, size_t count)
+{
+ struct zynq_fpga_priv *priv;
+ int err;
+ char *kbuf;
+ size_t in_count;
+ dma_addr_t dma_addr;
+ u32 transfer_length;
+ u32 intr_status;
+
+ in_count = count;
+ priv = mgr->priv;
+
+ kbuf = dma_alloc_coherent(priv->dev, count, &dma_addr, GFP_KERNEL);
+ if (!kbuf)
+ return -ENOMEM;
+
+ memcpy(kbuf, buf, count);
+
+ /* enable clock */
+ err = clk_enable(priv->clk);
+ if (err)
+ goto out_free;
+
+ zynq_fpga_write(priv, INT_STS_OFFSET, IXR_ALL_MASK);
+
+ reinit_completion(&priv->dma_done);
+
+ /* enable DMA and error IRQs */
+ zynq_fpga_unmask_irqs(priv);
+
+ /* the +1 in the src addr is used to hold off on DMA_DONE IRQ
+ * until both AXI and PCAP are done ...
+ */
+ zynq_fpga_write(priv, DMA_SRC_ADDR_OFFSET, (u32)(dma_addr) + 1);
+ zynq_fpga_write(priv, DMA_DST_ADDR_OFFSET, (u32)DMA_INVALID_ADDRESS);
+
+ /* convert #bytes to #words */
+ transfer_length = (count + 3) / 4;
+
+ zynq_fpga_write(priv, DMA_SRC_LEN_OFFSET, transfer_length);
+ zynq_fpga_write(priv, DMA_DEST_LEN_OFFSET, 0);
+
+ wait_for_completion(&priv->dma_done);
+
+ intr_status = zynq_fpga_read(priv, INT_STS_OFFSET);
+ zynq_fpga_write(priv, INT_STS_OFFSET, intr_status);
+
+ if (!((intr_status & IXR_D_P_DONE_MASK) == IXR_D_P_DONE_MASK)) {
+ dev_err(priv->dev, "Error configuring FPGA");
+ err = -EFAULT;
+ }
+
+ clk_disable(priv->clk);
+
+out_free:
+ dma_free_coherent(priv->dev, in_count, kbuf, dma_addr);
+
+ return err;
+}
+
+static int zynq_fpga_ops_write_complete(struct fpga_manager *mgr, u32 flags)
+{
+ struct zynq_fpga_priv *priv = mgr->priv;
+ int err;
+ u32 intr_status;
+
+ err = clk_enable(priv->clk);
+ if (err)
+ return err;
+
+ err = zynq_fpga_poll_timeout(priv, INT_STS_OFFSET, intr_status,
+ intr_status & IXR_PCFG_DONE_MASK,
+ INIT_POLL_DELAY,
+ INIT_POLL_TIMEOUT);
+
+ clk_disable(priv->clk);
+
+ if (err)
+ return err;
+
+ /* for the partial reconfig case we didn't touch the level shifters */
+ if (!(flags & FPGA_MGR_PARTIAL_RECONFIG)) {
+ /* enable level shifters from PL to PS */
+ regmap_write(priv->slcr, SLCR_LVL_SHFTR_EN_OFFSET,
+ LVL_SHFTR_ENABLE_PL_TO_PS);
+
+ /* deassert AXI interface resets */
+ regmap_write(priv->slcr, SLCR_FPGA_RST_CTRL_OFFSET,
+ FPGA_RST_NONE_MASK);
+ }
+
+ return 0;
+}
+
+static enum fpga_mgr_states zynq_fpga_ops_state(struct fpga_manager *mgr)
+{
+ int err;
+ u32 intr_status;
+ struct zynq_fpga_priv *priv;
+
+ priv = mgr->priv;
+
+ err = clk_enable(priv->clk);
+ if (err)
+ return FPGA_MGR_STATE_UNKNOWN;
+
+ intr_status = zynq_fpga_read(priv, INT_STS_OFFSET);
+ clk_disable(priv->clk);
+
+ if (intr_status & IXR_PCFG_DONE_MASK)
+ return FPGA_MGR_STATE_OPERATING;
+
+ return FPGA_MGR_STATE_UNKNOWN;
+}
+
+static const struct fpga_manager_ops zynq_fpga_ops = {
+ .state = zynq_fpga_ops_state,
+ .write_init = zynq_fpga_ops_write_init,
+ .write = zynq_fpga_ops_write,
+ .write_complete = zynq_fpga_ops_write_complete,
+};
+
+static int zynq_fpga_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct zynq_fpga_priv *priv;
+ struct resource *res;
+ int err;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->dev = dev;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ priv->io_base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(priv->io_base))
+ return PTR_ERR(priv->io_base);
+
+ priv->slcr = syscon_regmap_lookup_by_phandle(dev->of_node,
+ "syscon");
+ if (IS_ERR(priv->slcr)) {
+ dev_err(dev, "unable to get zynq-slcr regmap");
+ return PTR_ERR(priv->slcr);
+ }
+
+ init_completion(&priv->dma_done);
+
+ priv->irq = platform_get_irq(pdev, 0);
+ if (priv->irq < 0) {
+ dev_err(dev, "No IRQ available");
+ return priv->irq;
+ }
+
+ err = devm_request_irq(dev, priv->irq, zynq_fpga_isr, 0,
+ dev_name(dev), priv);
+ if (err) {
+ dev_err(dev, "unable to request IRQ");
+ return err;
+ }
+
+ priv->clk = devm_clk_get(dev, "ref_clk");
+ if (IS_ERR(priv->clk)) {
+ dev_err(dev, "input clock not found");
+ return PTR_ERR(priv->clk);
+ }
+
+ err = clk_prepare_enable(priv->clk);
+ if (err) {
+ dev_err(dev, "unable to enable clock");
+ return err;
+ }
+
+ /* unlock the device */
+ zynq_fpga_write(priv, UNLOCK_OFFSET, UNLOCK_MASK);
+
+ clk_disable(priv->clk);
+
+ err = fpga_mgr_register(dev, "Xilinx Zynq FPGA Manager",
+ &zynq_fpga_ops, priv);
+ if (err) {
+ dev_err(dev, "unable to register FPGA manager");
+ clk_unprepare(priv->clk);
+ return err;
+ }
+
+ return 0;
+}
+
+static int zynq_fpga_remove(struct platform_device *pdev)
+{
+ struct zynq_fpga_priv *priv;
+ struct fpga_manager *mgr;
+
+ mgr = platform_get_drvdata(pdev);
+ priv = mgr->priv;
+
+ fpga_mgr_unregister(&pdev->dev);
+
+ clk_unprepare(priv->clk);
+
+ return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id zynq_fpga_of_match[] = {
+ { .compatible = "xlnx,zynq-devcfg-1.0", },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, zynq_fpga_of_match);
+#endif
+
+static struct platform_driver zynq_fpga_driver = {
+ .probe = zynq_fpga_probe,
+ .remove = zynq_fpga_remove,
+ .driver = {
+ .name = "zynq_fpga_manager",
+ .of_match_table = of_match_ptr(zynq_fpga_of_match),
+ },
+};
+
+module_platform_driver(zynq_fpga_driver);
+
+MODULE_AUTHOR("Moritz Fischer <moritz.fischer@ettus.com>");
+MODULE_AUTHOR("Michal Simek <michal.simek@xilinx.com>");
+MODULE_DESCRIPTION("Xilinx Zynq FPGA Manager");
+MODULE_LICENSE("GPL v2");