These changes are the raw update to linux-4.4.6-rt14. Kernel sources

are taken from kernel.org, and rt patch from the rt wiki download page.

During the rebasing, the following patch collided:

Force tick interrupt and get rid of softirq magic(I70131fb85).

Collisions have been removed because its logic was found on the
source already.

Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>

1 files changed, 17 insertions, 42 deletions

diff --git a/kernel/drivers/extcon/extcon-rt8973a.c b/kernel/drivers/extcon/extcon-rt8973a.c
index 9ccd5af89..36bf1d637 100644
--- a/kernel/drivers/extcon/extcon-rt8973a.c
+++ b/kernel/drivers/extcon/extcon-rt8973a.c
@@ -90,27 +90,12 @@ static struct reg_data rt8973a_reg_data[] = {
 };
 
 /* List of detectable cables */
-enum {
-	EXTCON_CABLE_USB = 0,
-	EXTCON_CABLE_USB_HOST,
-	EXTCON_CABLE_TA,
-	EXTCON_CABLE_JIG_OFF_USB,
-	EXTCON_CABLE_JIG_ON_USB,
-	EXTCON_CABLE_JIG_OFF_UART,
-	EXTCON_CABLE_JIG_ON_UART,
-
-	EXTCON_CABLE_END,
-};
-
-static const char *rt8973a_extcon_cable[] = {
-	[EXTCON_CABLE_USB]		= "USB",
-	[EXTCON_CABLE_USB_HOST]		= "USB-Host",
-	[EXTCON_CABLE_TA]		= "TA",
-	[EXTCON_CABLE_JIG_OFF_USB]	= "JIG-USB-OFF",
-	[EXTCON_CABLE_JIG_ON_USB]	= "JIG-USB-ON",
-	[EXTCON_CABLE_JIG_OFF_UART]	= "JIG-UART-OFF",
-	[EXTCON_CABLE_JIG_ON_UART]	= "JIG-UART-ON",
-	NULL,
+static const unsigned int rt8973a_extcon_cable[] = {
+	EXTCON_USB,
+	EXTCON_USB_HOST,
+	EXTCON_CHG_USB_DCP,
+	EXTCON_JIG,
+	EXTCON_NONE,
 };
 
 /* Define OVP (Over Voltage Protection), OTP (Over Temperature Protection) */
@@ -313,14 +298,11 @@ static int rt8973a_muic_cable_handler(struct rt8973a_muic_info *info,
 					enum rt8973a_event_type event)
 {
 	static unsigned int prev_cable_type;
-	const char **cable_names = info->edev->supported_cable;
 	unsigned int con_sw = DM_DP_SWITCH_UART;
-	int ret, idx = 0, cable_type;
+	int ret, cable_type;
+	unsigned int id;
 	bool attached = false;
 
-	if (!cable_names)
-		return 0;
-
 	switch (event) {
 	case RT8973A_EVENT_ATTACH:
 		cable_type = rt8973a_muic_get_cable_type(info);
@@ -347,31 +329,25 @@ static int rt8973a_muic_cable_handler(struct rt8973a_muic_info *info,
 
 	switch (cable_type) {
 	case RT8973A_MUIC_ADC_OTG:
-		idx = EXTCON_CABLE_USB_HOST;
+		id = EXTCON_USB_HOST;
 		con_sw = DM_DP_SWITCH_USB;
 		break;
 	case RT8973A_MUIC_ADC_TA:
-		idx = EXTCON_CABLE_TA;
+		id = EXTCON_CHG_USB_DCP;
 		con_sw = DM_DP_SWITCH_OPEN;
 		break;
 	case RT8973A_MUIC_ADC_FACTORY_MODE_BOOT_OFF_USB:
-		idx = EXTCON_CABLE_JIG_OFF_USB;
-		con_sw = DM_DP_SWITCH_UART;
-		break;
 	case RT8973A_MUIC_ADC_FACTORY_MODE_BOOT_ON_USB:
-		idx = EXTCON_CABLE_JIG_ON_USB;
-		con_sw = DM_DP_SWITCH_UART;
+		id = EXTCON_JIG;
+		con_sw = DM_DP_SWITCH_USB;
 		break;
 	case RT8973A_MUIC_ADC_FACTORY_MODE_BOOT_OFF_UART:
-		idx = EXTCON_CABLE_JIG_OFF_UART;
-		con_sw = DM_DP_SWITCH_UART;
-		break;
 	case RT8973A_MUIC_ADC_FACTORY_MODE_BOOT_ON_UART:
-		idx = EXTCON_CABLE_JIG_ON_UART;
+		id = EXTCON_JIG;
 		con_sw = DM_DP_SWITCH_UART;
 		break;
 	case RT8973A_MUIC_ADC_USB:
-		idx = EXTCON_CABLE_USB;
+		id = EXTCON_USB;
 		con_sw = DM_DP_SWITCH_USB;
 		break;
 	case RT8973A_MUIC_ADC_OPEN:
@@ -421,7 +397,7 @@ static int rt8973a_muic_cable_handler(struct rt8973a_muic_info *info,
 		return ret;
 
 	/* Change the state of external accessory */
-	extcon_set_cable_state(info->edev, cable_names[idx], attached);
+	extcon_set_cable_state_(info->edev, id, attached);
 
 	return 0;
 }
@@ -618,7 +594,7 @@ static int rt8973a_muic_i2c_probe(struct i2c_client *i2c,
 
 	for (i = 0; i < info->num_muic_irqs; i++) {
 		struct muic_irq *muic_irq = &info->muic_irqs[i];
-		unsigned int virq = 0;
+		int virq = 0;
 
 		virq = regmap_irq_get_virq(info->irq_data, muic_irq->irq);
 		if (virq <= 0)
@@ -643,7 +619,6 @@ static int rt8973a_muic_i2c_probe(struct i2c_client *i2c,
 		dev_err(info->dev, "failed to allocate memory for extcon\n");
 		return -ENOMEM;
 	}
-	info->edev->name = np->name;
 
 	/* Register extcon device */
 	ret = devm_extcon_dev_register(info->dev, info->edev);
@@ -683,6 +658,7 @@ static const struct of_device_id rt8973a_dt_match[] = {
 	{ .compatible = "richtek,rt8973a-muic" },
 	{ },
 };
+MODULE_DEVICE_TABLE(of, rt8973a_dt_match);
 
 #ifdef CONFIG_PM_SLEEP
 static int rt8973a_muic_suspend(struct device *dev)
@@ -718,7 +694,6 @@ MODULE_DEVICE_TABLE(i2c, rt8973a_i2c_id);
 static struct i2c_driver rt8973a_muic_i2c_driver = {
 	.driver		= {
 		.name	= "rt8973a",
-		.owner	= THIS_MODULE,
 		.pm	= &rt8973a_muic_pm_ops,
 		.of_match_table = rt8973a_dt_match,
 	},