Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

1 files changed, 124 insertions, 0 deletions

diff --git a/kernel/drivers/dma/hsu/pci.c b/kernel/drivers/dma/hsu/pci.c
new file mode 100644
index 000000000..77879e6dd
--- /dev/null
+++ b/kernel/drivers/dma/hsu/pci.c
@@ -0,0 +1,124 @@
+/*
+ * PCI driver for the High Speed UART DMA
+ *
+ * Copyright (C) 2015 Intel Corporation
+ * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+ *
+ * Partially based on the bits found in drivers/tty/serial/mfd.c.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+
+#include "hsu.h"
+
+#define HSU_PCI_DMASR		0x00
+#define HSU_PCI_DMAISR		0x04
+
+#define HSU_PCI_CHAN_OFFSET	0x100
+
+static irqreturn_t hsu_pci_irq(int irq, void *dev)
+{
+	struct hsu_dma_chip *chip = dev;
+	u32 dmaisr;
+	unsigned short i;
+	irqreturn_t ret = IRQ_NONE;
+
+	dmaisr = readl(chip->regs + HSU_PCI_DMAISR);
+	for (i = 0; i < chip->pdata->nr_channels; i++) {
+		if (dmaisr & 0x1)
+			ret |= hsu_dma_irq(chip, i);
+		dmaisr >>= 1;
+	}
+
+	return ret;
+}
+
+static int hsu_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	struct hsu_dma_chip *chip;
+	int ret;
+
+	ret = pcim_enable_device(pdev);
+	if (ret)
+		return ret;
+
+	ret = pcim_iomap_regions(pdev, BIT(0), pci_name(pdev));
+	if (ret) {
+		dev_err(&pdev->dev, "I/O memory remapping failed\n");
+		return ret;
+	}
+
+	pci_set_master(pdev);
+	pci_try_set_mwi(pdev);
+
+	ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+	if (ret)
+		return ret;
+
+	ret = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+	if (ret)
+		return ret;
+
+	chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	chip->dev = &pdev->dev;
+	chip->regs = pcim_iomap_table(pdev)[0];
+	chip->length = pci_resource_len(pdev, 0);
+	chip->offset = HSU_PCI_CHAN_OFFSET;
+	chip->irq = pdev->irq;
+
+	pci_enable_msi(pdev);
+
+	ret = hsu_dma_probe(chip);
+	if (ret)
+		return ret;
+
+	ret = request_irq(chip->irq, hsu_pci_irq, 0, "hsu_dma_pci", chip);
+	if (ret)
+		goto err_register_irq;
+
+	pci_set_drvdata(pdev, chip);
+
+	return 0;
+
+err_register_irq:
+	hsu_dma_remove(chip);
+	return ret;
+}
+
+static void hsu_pci_remove(struct pci_dev *pdev)
+{
+	struct hsu_dma_chip *chip = pci_get_drvdata(pdev);
+
+	free_irq(chip->irq, chip);
+	hsu_dma_remove(chip);
+}
+
+static const struct pci_device_id hsu_pci_id_table[] = {
+	{ PCI_VDEVICE(INTEL, 0x081e), 0 },
+	{ PCI_VDEVICE(INTEL, 0x1192), 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(pci, hsu_pci_id_table);
+
+static struct pci_driver hsu_pci_driver = {
+	.name		= "hsu_dma_pci",
+	.id_table	= hsu_pci_id_table,
+	.probe		= hsu_pci_probe,
+	.remove		= hsu_pci_remove,
+};
+
+module_pci_driver(hsu_pci_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("High Speed UART DMA PCI driver");
+MODULE_AUTHOR("Andy Shevchenko <andriy.shevchenko@linux.intel.com>");