Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

1 files changed, 2327 insertions, 0 deletions

diff --git a/kernel/drivers/dma/amba-pl08x.c b/kernel/drivers/dma/amba-pl08x.c
new file mode 100644
index 000000000..49d396ec0
--- /dev/null
+++ b/kernel/drivers/dma/amba-pl08x.c
@@ -0,0 +1,2327 @@
+/*
+ * Copyright (c) 2006 ARM Ltd.
+ * Copyright (c) 2010 ST-Ericsson SA
+ *
+ * Author: Peter Pearse <peter.pearse@arm.com>
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is in this distribution in the file
+ * called COPYING.
+ *
+ * Documentation: ARM DDI 0196G == PL080
+ * Documentation: ARM DDI 0218E == PL081
+ * Documentation: S3C6410 User's Manual == PL080S
+ *
+ * PL080 & PL081 both have 16 sets of DMA signals that can be routed to any
+ * channel.
+ *
+ * The PL080 has 8 channels available for simultaneous use, and the PL081
+ * has only two channels. So on these DMA controllers the number of channels
+ * and the number of incoming DMA signals are two totally different things.
+ * It is usually not possible to theoretically handle all physical signals,
+ * so a multiplexing scheme with possible denial of use is necessary.
+ *
+ * The PL080 has a dual bus master, PL081 has a single master.
+ *
+ * PL080S is a version modified by Samsung and used in S3C64xx SoCs.
+ * It differs in following aspects:
+ * - CH_CONFIG register at different offset,
+ * - separate CH_CONTROL2 register for transfer size,
+ * - bigger maximum transfer size,
+ * - 8-word aligned LLI, instead of 4-word, due to extra CCTL2 word,
+ * - no support for peripheral flow control.
+ *
+ * Memory to peripheral transfer may be visualized as
+ *	Get data from memory to DMAC
+ *	Until no data left
+ *		On burst request from peripheral
+ *			Destination burst from DMAC to peripheral
+ *			Clear burst request
+ *	Raise terminal count interrupt
+ *
+ * For peripherals with a FIFO:
+ * Source      burst size == half the depth of the peripheral FIFO
+ * Destination burst size == the depth of the peripheral FIFO
+ *
+ * (Bursts are irrelevant for mem to mem transfers - there are no burst
+ * signals, the DMA controller will simply facilitate its AHB master.)
+ *
+ * ASSUMES default (little) endianness for DMA transfers
+ *
+ * The PL08x has two flow control settings:
+ *  - DMAC flow control: the transfer size defines the number of transfers
+ *    which occur for the current LLI entry, and the DMAC raises TC at the
+ *    end of every LLI entry.  Observed behaviour shows the DMAC listening
+ *    to both the BREQ and SREQ signals (contrary to documented),
+ *    transferring data if either is active.  The LBREQ and LSREQ signals
+ *    are ignored.
+ *
+ *  - Peripheral flow control: the transfer size is ignored (and should be
+ *    zero).  The data is transferred from the current LLI entry, until
+ *    after the final transfer signalled by LBREQ or LSREQ.  The DMAC
+ *    will then move to the next LLI entry. Unsupported by PL080S.
+ */
+#include <linux/amba/bus.h>
+#include <linux/amba/pl08x.h>
+#include <linux/debugfs.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/dmaengine.h>
+#include <linux/dmapool.h>
+#include <linux/dma-mapping.h>
+#include <linux/export.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+#include <linux/amba/pl080.h>
+
+#include "dmaengine.h"
+#include "virt-dma.h"
+
+#define DRIVER_NAME	"pl08xdmac"
+
+#define PL80X_DMA_BUSWIDTHS \
+	BIT(DMA_SLAVE_BUSWIDTH_UNDEFINED) | \
+	BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) | \
+	BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | \
+	BIT(DMA_SLAVE_BUSWIDTH_4_BYTES)
+
+static struct amba_driver pl08x_amba_driver;
+struct pl08x_driver_data;
+
+/**
+ * struct vendor_data - vendor-specific config parameters for PL08x derivatives
+ * @channels: the number of channels available in this variant
+ * @dualmaster: whether this version supports dual AHB masters or not.
+ * @nomadik: whether the channels have Nomadik security extension bits
+ *	that need to be checked for permission before use and some registers are
+ *	missing
+ * @pl080s: whether this version is a PL080S, which has separate register and
+ *	LLI word for transfer size.
+ */
+struct vendor_data {
+	u8 config_offset;
+	u8 channels;
+	bool dualmaster;
+	bool nomadik;
+	bool pl080s;
+	u32 max_transfer_size;
+};
+
+/**
+ * struct pl08x_bus_data - information of source or destination
+ * busses for a transfer
+ * @addr: current address
+ * @maxwidth: the maximum width of a transfer on this bus
+ * @buswidth: the width of this bus in bytes: 1, 2 or 4
+ */
+struct pl08x_bus_data {
+	dma_addr_t addr;
+	u8 maxwidth;
+	u8 buswidth;
+};
+
+#define IS_BUS_ALIGNED(bus) IS_ALIGNED((bus)->addr, (bus)->buswidth)
+
+/**
+ * struct pl08x_phy_chan - holder for the physical channels
+ * @id: physical index to this channel
+ * @lock: a lock to use when altering an instance of this struct
+ * @serving: the virtual channel currently being served by this physical
+ * channel
+ * @locked: channel unavailable for the system, e.g. dedicated to secure
+ * world
+ */
+struct pl08x_phy_chan {
+	unsigned int id;
+	void __iomem *base;
+	void __iomem *reg_config;
+	spinlock_t lock;
+	struct pl08x_dma_chan *serving;
+	bool locked;
+};
+
+/**
+ * struct pl08x_sg - structure containing data per sg
+ * @src_addr: src address of sg
+ * @dst_addr: dst address of sg
+ * @len: transfer len in bytes
+ * @node: node for txd's dsg_list
+ */
+struct pl08x_sg {
+	dma_addr_t src_addr;
+	dma_addr_t dst_addr;
+	size_t len;
+	struct list_head node;
+};
+
+/**
+ * struct pl08x_txd - wrapper for struct dma_async_tx_descriptor
+ * @vd: virtual DMA descriptor
+ * @dsg_list: list of children sg's
+ * @llis_bus: DMA memory address (physical) start for the LLIs
+ * @llis_va: virtual memory address start for the LLIs
+ * @cctl: control reg values for current txd
+ * @ccfg: config reg values for current txd
+ * @done: this marks completed descriptors, which should not have their
+ *   mux released.
+ * @cyclic: indicate cyclic transfers
+ */
+struct pl08x_txd {
+	struct virt_dma_desc vd;
+	struct list_head dsg_list;
+	dma_addr_t llis_bus;
+	u32 *llis_va;
+	/* Default cctl value for LLIs */
+	u32 cctl;
+	/*
+	 * Settings to be put into the physical channel when we
+	 * trigger this txd.  Other registers are in llis_va[0].
+	 */
+	u32 ccfg;
+	bool done;
+	bool cyclic;
+};
+
+/**
+ * struct pl08x_dma_chan_state - holds the PL08x specific virtual channel
+ * states
+ * @PL08X_CHAN_IDLE: the channel is idle
+ * @PL08X_CHAN_RUNNING: the channel has allocated a physical transport
+ * channel and is running a transfer on it
+ * @PL08X_CHAN_PAUSED: the channel has allocated a physical transport
+ * channel, but the transfer is currently paused
+ * @PL08X_CHAN_WAITING: the channel is waiting for a physical transport
+ * channel to become available (only pertains to memcpy channels)
+ */
+enum pl08x_dma_chan_state {
+	PL08X_CHAN_IDLE,
+	PL08X_CHAN_RUNNING,
+	PL08X_CHAN_PAUSED,
+	PL08X_CHAN_WAITING,
+};
+
+/**
+ * struct pl08x_dma_chan - this structure wraps a DMA ENGINE channel
+ * @vc: wrappped virtual channel
+ * @phychan: the physical channel utilized by this channel, if there is one
+ * @name: name of channel
+ * @cd: channel platform data
+ * @runtime_addr: address for RX/TX according to the runtime config
+ * @at: active transaction on this channel
+ * @lock: a lock for this channel data
+ * @host: a pointer to the host (internal use)
+ * @state: whether the channel is idle, paused, running etc
+ * @slave: whether this channel is a device (slave) or for memcpy
+ * @signal: the physical DMA request signal which this channel is using
+ * @mux_use: count of descriptors using this DMA request signal setting
+ */
+struct pl08x_dma_chan {
+	struct virt_dma_chan vc;
+	struct pl08x_phy_chan *phychan;
+	const char *name;
+	const struct pl08x_channel_data *cd;
+	struct dma_slave_config cfg;
+	struct pl08x_txd *at;
+	struct pl08x_driver_data *host;
+	enum pl08x_dma_chan_state state;
+	bool slave;
+	int signal;
+	unsigned mux_use;
+};
+
+/**
+ * struct pl08x_driver_data - the local state holder for the PL08x
+ * @slave: slave engine for this instance
+ * @memcpy: memcpy engine for this instance
+ * @base: virtual memory base (remapped) for the PL08x
+ * @adev: the corresponding AMBA (PrimeCell) bus entry
+ * @vd: vendor data for this PL08x variant
+ * @pd: platform data passed in from the platform/machine
+ * @phy_chans: array of data for the physical channels
+ * @pool: a pool for the LLI descriptors
+ * @lli_buses: bitmask to or in to LLI pointer selecting AHB port for LLI
+ * fetches
+ * @mem_buses: set to indicate memory transfers on AHB2.
+ * @lock: a spinlock for this struct
+ */
+struct pl08x_driver_data {
+	struct dma_device slave;
+	struct dma_device memcpy;
+	void __iomem *base;
+	struct amba_device *adev;
+	const struct vendor_data *vd;
+	struct pl08x_platform_data *pd;
+	struct pl08x_phy_chan *phy_chans;
+	struct dma_pool *pool;
+	u8 lli_buses;
+	u8 mem_buses;
+	u8 lli_words;
+};
+
+/*
+ * PL08X specific defines
+ */
+
+/* The order of words in an LLI. */
+#define PL080_LLI_SRC		0
+#define PL080_LLI_DST		1
+#define PL080_LLI_LLI		2
+#define PL080_LLI_CCTL		3
+#define PL080S_LLI_CCTL2	4
+
+/* Total words in an LLI. */
+#define PL080_LLI_WORDS		4
+#define PL080S_LLI_WORDS	8
+
+/*
+ * Number of LLIs in each LLI buffer allocated for one transfer
+ * (maximum times we call dma_pool_alloc on this pool without freeing)
+ */
+#define MAX_NUM_TSFR_LLIS	512
+#define PL08X_ALIGN		8
+
+static inline struct pl08x_dma_chan *to_pl08x_chan(struct dma_chan *chan)
+{
+	return container_of(chan, struct pl08x_dma_chan, vc.chan);
+}
+
+static inline struct pl08x_txd *to_pl08x_txd(struct dma_async_tx_descriptor *tx)
+{
+	return container_of(tx, struct pl08x_txd, vd.tx);
+}
+
+/*
+ * Mux handling.
+ *
+ * This gives us the DMA request input to the PL08x primecell which the
+ * peripheral described by the channel data will be routed to, possibly
+ * via a board/SoC specific external MUX.  One important point to note
+ * here is that this does not depend on the physical channel.
+ */
+static int pl08x_request_mux(struct pl08x_dma_chan *plchan)
+{
+	const struct pl08x_platform_data *pd = plchan->host->pd;
+	int ret;
+
+	if (plchan->mux_use++ == 0 && pd->get_xfer_signal) {
+		ret = pd->get_xfer_signal(plchan->cd);
+		if (ret < 0) {
+			plchan->mux_use = 0;
+			return ret;
+		}
+
+		plchan->signal = ret;
+	}
+	return 0;
+}
+
+static void pl08x_release_mux(struct pl08x_dma_chan *plchan)
+{
+	const struct pl08x_platform_data *pd = plchan->host->pd;
+
+	if (plchan->signal >= 0) {
+		WARN_ON(plchan->mux_use == 0);
+
+		if (--plchan->mux_use == 0 && pd->put_xfer_signal) {
+			pd->put_xfer_signal(plchan->cd, plchan->signal);
+			plchan->signal = -1;
+		}
+	}
+}
+
+/*
+ * Physical channel handling
+ */
+
+/* Whether a certain channel is busy or not */
+static int pl08x_phy_channel_busy(struct pl08x_phy_chan *ch)
+{
+	unsigned int val;
+
+	val = readl(ch->reg_config);
+	return val & PL080_CONFIG_ACTIVE;
+}
+
+static void pl08x_write_lli(struct pl08x_driver_data *pl08x,
+		struct pl08x_phy_chan *phychan, const u32 *lli, u32 ccfg)
+{
+	if (pl08x->vd->pl080s)
+		dev_vdbg(&pl08x->adev->dev,
+			"WRITE channel %d: csrc=0x%08x, cdst=0x%08x, "
+			"clli=0x%08x, cctl=0x%08x, cctl2=0x%08x, ccfg=0x%08x\n",
+			phychan->id, lli[PL080_LLI_SRC], lli[PL080_LLI_DST],
+			lli[PL080_LLI_LLI], lli[PL080_LLI_CCTL],
+			lli[PL080S_LLI_CCTL2], ccfg);
+	else
+		dev_vdbg(&pl08x->adev->dev,
+			"WRITE channel %d: csrc=0x%08x, cdst=0x%08x, "
+			"clli=0x%08x, cctl=0x%08x, ccfg=0x%08x\n",
+			phychan->id, lli[PL080_LLI_SRC], lli[PL080_LLI_DST],
+			lli[PL080_LLI_LLI], lli[PL080_LLI_CCTL], ccfg);
+
+	writel_relaxed(lli[PL080_LLI_SRC], phychan->base + PL080_CH_SRC_ADDR);
+	writel_relaxed(lli[PL080_LLI_DST], phychan->base + PL080_CH_DST_ADDR);
+	writel_relaxed(lli[PL080_LLI_LLI], phychan->base + PL080_CH_LLI);
+	writel_relaxed(lli[PL080_LLI_CCTL], phychan->base + PL080_CH_CONTROL);
+
+	if (pl08x->vd->pl080s)
+		writel_relaxed(lli[PL080S_LLI_CCTL2],
+				phychan->base + PL080S_CH_CONTROL2);
+
+	writel(ccfg, phychan->reg_config);
+}
+
+/*
+ * Set the initial DMA register values i.e. those for the first LLI
+ * The next LLI pointer and the configuration interrupt bit have
+ * been set when the LLIs were constructed.  Poke them into the hardware
+ * and start the transfer.
+ */
+static void pl08x_start_next_txd(struct pl08x_dma_chan *plchan)
+{
+	struct pl08x_driver_data *pl08x = plchan->host;
+	struct pl08x_phy_chan *phychan = plchan->phychan;
+	struct virt_dma_desc *vd = vchan_next_desc(&plchan->vc);
+	struct pl08x_txd *txd = to_pl08x_txd(&vd->tx);
+	u32 val;
+
+	list_del(&txd->vd.node);
+
+	plchan->at = txd;
+
+	/* Wait for channel inactive */
+	while (pl08x_phy_channel_busy(phychan))
+		cpu_relax();
+
+	pl08x_write_lli(pl08x, phychan, &txd->llis_va[0], txd->ccfg);
+
+	/* Enable the DMA channel */
+	/* Do not access config register until channel shows as disabled */
+	while (readl(pl08x->base + PL080_EN_CHAN) & (1 << phychan->id))
+		cpu_relax();
+
+	/* Do not access config register until channel shows as inactive */
+	val = readl(phychan->reg_config);
+	while ((val & PL080_CONFIG_ACTIVE) || (val & PL080_CONFIG_ENABLE))
+		val = readl(phychan->reg_config);
+
+	writel(val | PL080_CONFIG_ENABLE, phychan->reg_config);
+}
+
+/*
+ * Pause the channel by setting the HALT bit.
+ *
+ * For M->P transfers, pause the DMAC first and then stop the peripheral -
+ * the FIFO can only drain if the peripheral is still requesting data.
+ * (note: this can still timeout if the DMAC FIFO never drains of data.)
+ *
+ * For P->M transfers, disable the peripheral first to stop it filling
+ * the DMAC FIFO, and then pause the DMAC.
+ */
+static void pl08x_pause_phy_chan(struct pl08x_phy_chan *ch)
+{
+	u32 val;
+	int timeout;
+
+	/* Set the HALT bit and wait for the FIFO to drain */
+	val = readl(ch->reg_config);
+	val |= PL080_CONFIG_HALT;
+	writel(val, ch->reg_config);
+
+	/* Wait for channel inactive */
+	for (timeout = 1000; timeout; timeout--) {
+		if (!pl08x_phy_channel_busy(ch))
+			break;
+		udelay(1);
+	}
+	if (pl08x_phy_channel_busy(ch))
+		pr_err("pl08x: channel%u timeout waiting for pause\n", ch->id);
+}
+
+static void pl08x_resume_phy_chan(struct pl08x_phy_chan *ch)
+{
+	u32 val;
+
+	/* Clear the HALT bit */
+	val = readl(ch->reg_config);
+	val &= ~PL080_CONFIG_HALT;
+	writel(val, ch->reg_config);
+}
+
+/*
+ * pl08x_terminate_phy_chan() stops the channel, clears the FIFO and
+ * clears any pending interrupt status.  This should not be used for
+ * an on-going transfer, but as a method of shutting down a channel
+ * (eg, when it's no longer used) or terminating a transfer.
+ */
+static void pl08x_terminate_phy_chan(struct pl08x_driver_data *pl08x,
+	struct pl08x_phy_chan *ch)
+{
+	u32 val = readl(ch->reg_config);
+
+	val &= ~(PL080_CONFIG_ENABLE | PL080_CONFIG_ERR_IRQ_MASK |
+	         PL080_CONFIG_TC_IRQ_MASK);
+
+	writel(val, ch->reg_config);
+
+	writel(1 << ch->id, pl08x->base + PL080_ERR_CLEAR);
+	writel(1 << ch->id, pl08x->base + PL080_TC_CLEAR);
+}
+
+static inline u32 get_bytes_in_cctl(u32 cctl)
+{
+	/* The source width defines the number of bytes */
+	u32 bytes = cctl & PL080_CONTROL_TRANSFER_SIZE_MASK;
+
+	cctl &= PL080_CONTROL_SWIDTH_MASK;
+
+	switch (cctl >> PL080_CONTROL_SWIDTH_SHIFT) {
+	case PL080_WIDTH_8BIT:
+		break;
+	case PL080_WIDTH_16BIT:
+		bytes *= 2;
+		break;
+	case PL080_WIDTH_32BIT:
+		bytes *= 4;
+		break;
+	}
+	return bytes;
+}
+
+static inline u32 get_bytes_in_cctl_pl080s(u32 cctl, u32 cctl1)
+{
+	/* The source width defines the number of bytes */
+	u32 bytes = cctl1 & PL080S_CONTROL_TRANSFER_SIZE_MASK;
+
+	cctl &= PL080_CONTROL_SWIDTH_MASK;
+
+	switch (cctl >> PL080_CONTROL_SWIDTH_SHIFT) {
+	case PL080_WIDTH_8BIT:
+		break;
+	case PL080_WIDTH_16BIT:
+		bytes *= 2;
+		break;
+	case PL080_WIDTH_32BIT:
+		bytes *= 4;
+		break;
+	}
+	return bytes;
+}
+
+/* The channel should be paused when calling this */
+static u32 pl08x_getbytes_chan(struct pl08x_dma_chan *plchan)
+{
+	struct pl08x_driver_data *pl08x = plchan->host;
+	const u32 *llis_va, *llis_va_limit;
+	struct pl08x_phy_chan *ch;
+	dma_addr_t llis_bus;
+	struct pl08x_txd *txd;
+	u32 llis_max_words;
+	size_t bytes;
+	u32 clli;
+
+	ch = plchan->phychan;
+	txd = plchan->at;
+
+	if (!ch || !txd)
+		return 0;
+
+	/*
+	 * Follow the LLIs to get the number of remaining
+	 * bytes in the currently active transaction.
+	 */
+	clli = readl(ch->base + PL080_CH_LLI) & ~PL080_LLI_LM_AHB2;
+
+	/* First get the remaining bytes in the active transfer */
+	if (pl08x->vd->pl080s)
+		bytes = get_bytes_in_cctl_pl080s(
+				readl(ch->base + PL080_CH_CONTROL),
+				readl(ch->base + PL080S_CH_CONTROL2));
+	else
+		bytes = get_bytes_in_cctl(readl(ch->base + PL080_CH_CONTROL));
+
+	if (!clli)
+		return bytes;
+
+	llis_va = txd->llis_va;
+	llis_bus = txd->llis_bus;
+
+	llis_max_words = pl08x->lli_words * MAX_NUM_TSFR_LLIS;
+	BUG_ON(clli < llis_bus || clli >= llis_bus +
+						sizeof(u32) * llis_max_words);
+
+	/*
+	 * Locate the next LLI - as this is an array,
+	 * it's simple maths to find.
+	 */
+	llis_va += (clli - llis_bus) / sizeof(u32);
+
+	llis_va_limit = llis_va + llis_max_words;
+
+	for (; llis_va < llis_va_limit; llis_va += pl08x->lli_words) {
+		if (pl08x->vd->pl080s)
+			bytes += get_bytes_in_cctl_pl080s(
+						llis_va[PL080_LLI_CCTL],
+						llis_va[PL080S_LLI_CCTL2]);
+		else
+			bytes += get_bytes_in_cctl(llis_va[PL080_LLI_CCTL]);
+
+		/*
+		 * A LLI pointer going backward terminates the LLI list
+		 */
+		if (llis_va[PL080_LLI_LLI] <= clli)
+			break;
+	}
+
+	return bytes;
+}
+
+/*
+ * Allocate a physical channel for a virtual channel
+ *
+ * Try to locate a physical channel to be used for this transfer. If all
+ * are taken return NULL and the requester will have to cope by using
+ * some fallback PIO mode or retrying later.
+ */
+static struct pl08x_phy_chan *
+pl08x_get_phy_channel(struct pl08x_driver_data *pl08x,
+		      struct pl08x_dma_chan *virt_chan)
+{
+	struct pl08x_phy_chan *ch = NULL;
+	unsigned long flags;
+	int i;
+
+	for (i = 0; i < pl08x->vd->channels; i++) {
+		ch = &pl08x->phy_chans[i];
+
+		spin_lock_irqsave(&ch->lock, flags);
+
+		if (!ch->locked && !ch->serving) {
+			ch->serving = virt_chan;
+			spin_unlock_irqrestore(&ch->lock, flags);
+			break;
+		}
+
+		spin_unlock_irqrestore(&ch->lock, flags);
+	}
+
+	if (i == pl08x->vd->channels) {
+		/* No physical channel available, cope with it */
+		return NULL;
+	}
+
+	return ch;
+}
+
+/* Mark the physical channel as free.  Note, this write is atomic. */
+static inline void pl08x_put_phy_channel(struct pl08x_driver_data *pl08x,
+					 struct pl08x_phy_chan *ch)
+{
+	ch->serving = NULL;
+}
+
+/*
+ * Try to allocate a physical channel.  When successful, assign it to
+ * this virtual channel, and initiate the next descriptor.  The
+ * virtual channel lock must be held at this point.
+ */
+static void pl08x_phy_alloc_and_start(struct pl08x_dma_chan *plchan)
+{
+	struct pl08x_driver_data *pl08x = plchan->host;
+	struct pl08x_phy_chan *ch;
+
+	ch = pl08x_get_phy_channel(pl08x, plchan);
+	if (!ch) {
+		dev_dbg(&pl08x->adev->dev, "no physical channel available for xfer on %s\n", plchan->name);
+		plchan->state = PL08X_CHAN_WAITING;
+		return;
+	}
+
+	dev_dbg(&pl08x->adev->dev, "allocated physical channel %d for xfer on %s\n",
+		ch->id, plchan->name);
+
+	plchan->phychan = ch;
+	plchan->state = PL08X_CHAN_RUNNING;
+	pl08x_start_next_txd(plchan);
+}
+
+static void pl08x_phy_reassign_start(struct pl08x_phy_chan *ch,
+	struct pl08x_dma_chan *plchan)
+{
+	struct pl08x_driver_data *pl08x = plchan->host;
+
+	dev_dbg(&pl08x->adev->dev, "reassigned physical channel %d for xfer on %s\n",
+		ch->id, plchan->name);
+
+	/*
+	 * We do this without taking the lock; we're really only concerned
+	 * about whether this pointer is NULL or not, and we're guaranteed
+	 * that this will only be called when it _already_ is non-NULL.
+	 */
+	ch->serving = plchan;
+	plchan->phychan = ch;
+	plchan->state = PL08X_CHAN_RUNNING;
+	pl08x_start_next_txd(plchan);
+}
+
+/*
+ * Free a physical DMA channel, potentially reallocating it to another
+ * virtual channel if we have any pending.
+ */
+static void pl08x_phy_free(struct pl08x_dma_chan *plchan)
+{
+	struct pl08x_driver_data *pl08x = plchan->host;
+	struct pl08x_dma_chan *p, *next;
+
+ retry:
+	next = NULL;
+
+	/* Find a waiting virtual channel for the next transfer. */
+	list_for_each_entry(p, &pl08x->memcpy.channels, vc.chan.device_node)
+		if (p->state == PL08X_CHAN_WAITING) {
+			next = p;
+			break;
+		}
+
+	if (!next) {
+		list_for_each_entry(p, &pl08x->slave.channels, vc.chan.device_node)
+			if (p->state == PL08X_CHAN_WAITING) {
+				next = p;
+				break;
+			}
+	}
+
+	/* Ensure that the physical channel is stopped */
+	pl08x_terminate_phy_chan(pl08x, plchan->phychan);
+
+	if (next) {
+		bool success;
+
+		/*
+		 * Eww.  We know this isn't going to deadlock
+		 * but lockdep probably doesn't.
+		 */
+		spin_lock(&next->vc.lock);
+		/* Re-check the state now that we have the lock */
+		success = next->state == PL08X_CHAN_WAITING;
+		if (success)
+			pl08x_phy_reassign_start(plchan->phychan, next);
+		spin_unlock(&next->vc.lock);
+
+		/* If the state changed, try to find another channel */
+		if (!success)
+			goto retry;
+	} else {
+		/* No more jobs, so free up the physical channel */
+		pl08x_put_phy_channel(pl08x, plchan->phychan);
+	}
+
+	plchan->phychan = NULL;
+	plchan->state = PL08X_CHAN_IDLE;
+}
+
+/*
+ * LLI handling
+ */
+
+static inline unsigned int pl08x_get_bytes_for_cctl(unsigned int coded)
+{
+	switch (coded) {
+	case PL080_WIDTH_8BIT:
+		return 1;
+	case PL080_WIDTH_16BIT:
+		return 2;
+	case PL080_WIDTH_32BIT:
+		return 4;
+	default:
+		break;
+	}
+	BUG();
+	return 0;
+}
+
+static inline u32 pl08x_cctl_bits(u32 cctl, u8 srcwidth, u8 dstwidth,
+				  size_t tsize)
+{
+	u32 retbits = cctl;
+
+	/* Remove all src, dst and transfer size bits */
+	retbits &= ~PL080_CONTROL_DWIDTH_MASK;
+	retbits &= ~PL080_CONTROL_SWIDTH_MASK;
+	retbits &= ~PL080_CONTROL_TRANSFER_SIZE_MASK;
+
+	/* Then set the bits according to the parameters */
+	switch (srcwidth) {
+	case 1:
+		retbits |= PL080_WIDTH_8BIT << PL080_CONTROL_SWIDTH_SHIFT;
+		break;
+	case 2:
+		retbits |= PL080_WIDTH_16BIT << PL080_CONTROL_SWIDTH_SHIFT;
+		break;
+	case 4:
+		retbits |= PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT;
+		break;
+	default:
+		BUG();
+		break;
+	}
+
+	switch (dstwidth) {
+	case 1:
+		retbits |= PL080_WIDTH_8BIT << PL080_CONTROL_DWIDTH_SHIFT;
+		break;
+	case 2:
+		retbits |= PL080_WIDTH_16BIT << PL080_CONTROL_DWIDTH_SHIFT;
+		break;
+	case 4:
+		retbits |= PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT;
+		break;
+	default:
+		BUG();
+		break;
+	}
+
+	tsize &= PL080_CONTROL_TRANSFER_SIZE_MASK;
+	retbits |= tsize << PL080_CONTROL_TRANSFER_SIZE_SHIFT;
+	return retbits;
+}
+
+struct pl08x_lli_build_data {
+	struct pl08x_txd *txd;
+	struct pl08x_bus_data srcbus;
+	struct pl08x_bus_data dstbus;
+	size_t remainder;
+	u32 lli_bus;
+};
+
+/*
+ * Autoselect a master bus to use for the transfer. Slave will be the chosen as
+ * victim in case src & dest are not similarly aligned. i.e. If after aligning
+ * masters address with width requirements of transfer (by sending few byte by
+ * byte data), slave is still not aligned, then its width will be reduced to
+ * BYTE.
+ * - prefers the destination bus if both available
+ * - prefers bus with fixed address (i.e. peripheral)
+ */
+static void pl08x_choose_master_bus(struct pl08x_lli_build_data *bd,
+	struct pl08x_bus_data **mbus, struct pl08x_bus_data **sbus, u32 cctl)
+{
+	if (!(cctl & PL080_CONTROL_DST_INCR)) {
+		*mbus = &bd->dstbus;
+		*sbus = &bd->srcbus;
+	} else if (!(cctl & PL080_CONTROL_SRC_INCR)) {
+		*mbus = &bd->srcbus;
+		*sbus = &bd->dstbus;
+	} else {
+		if (bd->dstbus.buswidth >= bd->srcbus.buswidth) {
+			*mbus = &bd->dstbus;
+			*sbus = &bd->srcbus;
+		} else {
+			*mbus = &bd->srcbus;
+			*sbus = &bd->dstbus;
+		}
+	}
+}
+
+/*
+ * Fills in one LLI for a certain transfer descriptor and advance the counter
+ */
+static void pl08x_fill_lli_for_desc(struct pl08x_driver_data *pl08x,
+				    struct pl08x_lli_build_data *bd,
+				    int num_llis, int len, u32 cctl, u32 cctl2)
+{
+	u32 offset = num_llis * pl08x->lli_words;
+	u32 *llis_va = bd->txd->llis_va + offset;
+	dma_addr_t llis_bus = bd->txd->llis_bus;
+
+	BUG_ON(num_llis >= MAX_NUM_TSFR_LLIS);
+
+	/* Advance the offset to next LLI. */
+	offset += pl08x->lli_words;
+
+	llis_va[PL080_LLI_SRC] = bd->srcbus.addr;
+	llis_va[PL080_LLI_DST] = bd->dstbus.addr;
+	llis_va[PL080_LLI_LLI] = (llis_bus + sizeof(u32) * offset);
+	llis_va[PL080_LLI_LLI] |= bd->lli_bus;
+	llis_va[PL080_LLI_CCTL] = cctl;
+	if (pl08x->vd->pl080s)
+		llis_va[PL080S_LLI_CCTL2] = cctl2;
+
+	if (cctl & PL080_CONTROL_SRC_INCR)
+		bd->srcbus.addr += len;
+	if (cctl & PL080_CONTROL_DST_INCR)
+		bd->dstbus.addr += len;
+
+	BUG_ON(bd->remainder < len);
+
+	bd->remainder -= len;
+}
+
+static inline void prep_byte_width_lli(struct pl08x_driver_data *pl08x,
+			struct pl08x_lli_build_data *bd, u32 *cctl, u32 len,
+			int num_llis, size_t *total_bytes)
+{
+	*cctl = pl08x_cctl_bits(*cctl, 1, 1, len);
+	pl08x_fill_lli_for_desc(pl08x, bd, num_llis, len, *cctl, len);
+	(*total_bytes) += len;
+}
+
+#ifdef VERBOSE_DEBUG
+static void pl08x_dump_lli(struct pl08x_driver_data *pl08x,
+			   const u32 *llis_va, int num_llis)
+{
+	int i;
+
+	if (pl08x->vd->pl080s) {
+		dev_vdbg(&pl08x->adev->dev,
+			"%-3s %-9s  %-10s %-10s %-10s %-10s %s\n",
+			"lli", "", "csrc", "cdst", "clli", "cctl", "cctl2");
+		for (i = 0; i < num_llis; i++) {
+			dev_vdbg(&pl08x->adev->dev,
+				"%3d @%p: 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x\n",
+				i, llis_va, llis_va[PL080_LLI_SRC],
+				llis_va[PL080_LLI_DST], llis_va[PL080_LLI_LLI],
+				llis_va[PL080_LLI_CCTL],
+				llis_va[PL080S_LLI_CCTL2]);
+			llis_va += pl08x->lli_words;
+		}
+	} else {
+		dev_vdbg(&pl08x->adev->dev,
+			"%-3s %-9s  %-10s %-10s %-10s %s\n",
+			"lli", "", "csrc", "cdst", "clli", "cctl");
+		for (i = 0; i < num_llis; i++) {
+			dev_vdbg(&pl08x->adev->dev,
+				"%3d @%p: 0x%08x 0x%08x 0x%08x 0x%08x\n",
+				i, llis_va, llis_va[PL080_LLI_SRC],
+				llis_va[PL080_LLI_DST], llis_va[PL080_LLI_LLI],
+				llis_va[PL080_LLI_CCTL]);
+			llis_va += pl08x->lli_words;
+		}
+	}
+}
+#else
+static inline void pl08x_dump_lli(struct pl08x_driver_data *pl08x,
+				  const u32 *llis_va, int num_llis) {}
+#endif
+
+/*
+ * This fills in the table of LLIs for the transfer descriptor
+ * Note that we assume we never have to change the burst sizes
+ * Return 0 for error
+ */
+static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
+			      struct pl08x_txd *txd)
+{
+	struct pl08x_bus_data *mbus, *sbus;
+	struct pl08x_lli_build_data bd;
+	int num_llis = 0;
+	u32 cctl, early_bytes = 0;
+	size_t max_bytes_per_lli, total_bytes;
+	u32 *llis_va, *last_lli;
+	struct pl08x_sg *dsg;
+
+	txd->llis_va = dma_pool_alloc(pl08x->pool, GFP_NOWAIT, &txd->llis_bus);
+	if (!txd->llis_va) {
+		dev_err(&pl08x->adev->dev, "%s no memory for llis\n", __func__);
+		return 0;
+	}
+
+	bd.txd = txd;
+	bd.lli_bus = (pl08x->lli_buses & PL08X_AHB2) ? PL080_LLI_LM_AHB2 : 0;
+	cctl = txd->cctl;
+
+	/* Find maximum width of the source bus */
+	bd.srcbus.maxwidth =
+		pl08x_get_bytes_for_cctl((cctl & PL080_CONTROL_SWIDTH_MASK) >>
+				       PL080_CONTROL_SWIDTH_SHIFT);
+
+	/* Find maximum width of the destination bus */
+	bd.dstbus.maxwidth =
+		pl08x_get_bytes_for_cctl((cctl & PL080_CONTROL_DWIDTH_MASK) >>
+				       PL080_CONTROL_DWIDTH_SHIFT);
+
+	list_for_each_entry(dsg, &txd->dsg_list, node) {
+		total_bytes = 0;
+		cctl = txd->cctl;
+
+		bd.srcbus.addr = dsg->src_addr;
+		bd.dstbus.addr = dsg->dst_addr;
+		bd.remainder = dsg->len;
+		bd.srcbus.buswidth = bd.srcbus.maxwidth;
+		bd.dstbus.buswidth = bd.dstbus.maxwidth;
+
+		pl08x_choose_master_bus(&bd, &mbus, &sbus, cctl);
+
+		dev_vdbg(&pl08x->adev->dev,
+			"src=0x%08llx%s/%u dst=0x%08llx%s/%u len=%zu\n",
+			(u64)bd.srcbus.addr,
+			cctl & PL080_CONTROL_SRC_INCR ? "+" : "",
+			bd.srcbus.buswidth,
+			(u64)bd.dstbus.addr,
+			cctl & PL080_CONTROL_DST_INCR ? "+" : "",
+			bd.dstbus.buswidth,
+			bd.remainder);
+		dev_vdbg(&pl08x->adev->dev, "mbus=%s sbus=%s\n",
+			mbus == &bd.srcbus ? "src" : "dst",
+			sbus == &bd.srcbus ? "src" : "dst");
+
+		/*
+		 * Zero length is only allowed if all these requirements are
+		 * met:
+		 * - flow controller is peripheral.
+		 * - src.addr is aligned to src.width
+		 * - dst.addr is aligned to dst.width
+		 *
+		 * sg_len == 1 should be true, as there can be two cases here:
+		 *
+		 * - Memory addresses are contiguous and are not scattered.
+		 *   Here, Only one sg will be passed by user driver, with
+		 *   memory address and zero length. We pass this to controller
+		 *   and after the transfer it will receive the last burst
+		 *   request from peripheral and so transfer finishes.
+		 *
+		 * - Memory addresses are scattered and are not contiguous.
+		 *   Here, Obviously as DMA controller doesn't know when a lli's
+		 *   transfer gets over, it can't load next lli. So in this
+		 *   case, there has to be an assumption that only one lli is
+		 *   supported. Thus, we can't have scattered addresses.
+		 */
+		if (!bd.remainder) {
+			u32 fc = (txd->ccfg & PL080_CONFIG_FLOW_CONTROL_MASK) >>
+				PL080_CONFIG_FLOW_CONTROL_SHIFT;
+			if (!((fc >= PL080_FLOW_SRC2DST_DST) &&
+					(fc <= PL080_FLOW_SRC2DST_SRC))) {
+				dev_err(&pl08x->adev->dev, "%s sg len can't be zero",
+					__func__);
+				return 0;
+			}
+
+			if (!IS_BUS_ALIGNED(&bd.srcbus) ||
+				!IS_BUS_ALIGNED(&bd.dstbus)) {
+				dev_err(&pl08x->adev->dev,
+					"%s src & dst address must be aligned to src"
+					" & dst width if peripheral is flow controller",
+					__func__);
+				return 0;
+			}
+
+			cctl = pl08x_cctl_bits(cctl, bd.srcbus.buswidth,
+					bd.dstbus.buswidth, 0);
+			pl08x_fill_lli_for_desc(pl08x, &bd, num_llis++,
+					0, cctl, 0);
+			break;
+		}
+
+		/*
+		 * Send byte by byte for following cases
+		 * - Less than a bus width available
+		 * - until master bus is aligned
+		 */
+		if (bd.remainder < mbus->buswidth)
+			early_bytes = bd.remainder;
+		else if (!IS_BUS_ALIGNED(mbus)) {
+			early_bytes = mbus->buswidth -
+				(mbus->addr & (mbus->buswidth - 1));
+			if ((bd.remainder - early_bytes) < mbus->buswidth)
+				early_bytes = bd.remainder;
+		}
+
+		if (early_bytes) {
+			dev_vdbg(&pl08x->adev->dev,
+				"%s byte width LLIs (remain 0x%08zx)\n",
+				__func__, bd.remainder);
+			prep_byte_width_lli(pl08x, &bd, &cctl, early_bytes,
+				num_llis++, &total_bytes);
+		}
+
+		if (bd.remainder) {
+			/*
+			 * Master now aligned
+			 * - if slave is not then we must set its width down
+			 */
+			if (!IS_BUS_ALIGNED(sbus)) {
+				dev_dbg(&pl08x->adev->dev,
+					"%s set down bus width to one byte\n",
+					__func__);
+
+				sbus->buswidth = 1;
+			}
+
+			/*
+			 * Bytes transferred = tsize * src width, not
+			 * MIN(buswidths)
+			 */
+			max_bytes_per_lli = bd.srcbus.buswidth *
+						pl08x->vd->max_transfer_size;
+			dev_vdbg(&pl08x->adev->dev,
+				"%s max bytes per lli = %zu\n",
+				__func__, max_bytes_per_lli);
+
+			/*
+			 * Make largest possible LLIs until less than one bus
+			 * width left
+			 */
+			while (bd.remainder > (mbus->buswidth - 1)) {
+				size_t lli_len, tsize, width;
+
+				/*
+				 * If enough left try to send max possible,
+				 * otherwise try to send the remainder
+				 */
+				lli_len = min(bd.remainder, max_bytes_per_lli);
+
+				/*
+				 * Check against maximum bus alignment:
+				 * Calculate actual transfer size in relation to
+				 * bus width an get a maximum remainder of the
+				 * highest bus width - 1
+				 */
+				width = max(mbus->buswidth, sbus->buswidth);
+				lli_len = (lli_len / width) * width;
+				tsize = lli_len / bd.srcbus.buswidth;
+
+				dev_vdbg(&pl08x->adev->dev,
+					"%s fill lli with single lli chunk of "
+					"size 0x%08zx (remainder 0x%08zx)\n",
+					__func__, lli_len, bd.remainder);
+
+				cctl = pl08x_cctl_bits(cctl, bd.srcbus.buswidth,
+					bd.dstbus.buswidth, tsize);
+				pl08x_fill_lli_for_desc(pl08x, &bd, num_llis++,
+						lli_len, cctl, tsize);
+				total_bytes += lli_len;
+			}
+
+			/*
+			 * Send any odd bytes
+			 */
+			if (bd.remainder) {
+				dev_vdbg(&pl08x->adev->dev,
+					"%s align with boundary, send odd bytes (remain %zu)\n",
+					__func__, bd.remainder);
+				prep_byte_width_lli(pl08x, &bd, &cctl,
+					bd.remainder, num_llis++, &total_bytes);
+			}
+		}
+
+		if (total_bytes != dsg->len) {
+			dev_err(&pl08x->adev->dev,
+				"%s size of encoded lli:s don't match total txd, transferred 0x%08zx from size 0x%08zx\n",
+				__func__, total_bytes, dsg->len);
+			return 0;
+		}
+
+		if (num_llis >= MAX_NUM_TSFR_LLIS) {
+			dev_err(&pl08x->adev->dev,
+				"%s need to increase MAX_NUM_TSFR_LLIS from 0x%08x\n",
+				__func__, MAX_NUM_TSFR_LLIS);
+			return 0;
+		}
+	}
+
+	llis_va = txd->llis_va;
+	last_lli = llis_va + (num_llis - 1) * pl08x->lli_words;
+
+	if (txd->cyclic) {
+		/* Link back to the first LLI. */
+		last_lli[PL080_LLI_LLI] = txd->llis_bus | bd.lli_bus;
+	} else {
+		/* The final LLI terminates the LLI. */
+		last_lli[PL080_LLI_LLI] = 0;
+		/* The final LLI element shall also fire an interrupt. */
+		last_lli[PL080_LLI_CCTL] |= PL080_CONTROL_TC_IRQ_EN;
+	}
+
+	pl08x_dump_lli(pl08x, llis_va, num_llis);
+
+	return num_llis;
+}
+
+static void pl08x_free_txd(struct pl08x_driver_data *pl08x,
+			   struct pl08x_txd *txd)
+{
+	struct pl08x_sg *dsg, *_dsg;
+
+	if (txd->llis_va)
+		dma_pool_free(pl08x->pool, txd->llis_va, txd->llis_bus);
+
+	list_for_each_entry_safe(dsg, _dsg, &txd->dsg_list, node) {
+		list_del(&dsg->node);
+		kfree(dsg);
+	}
+
+	kfree(txd);
+}
+
+static void pl08x_desc_free(struct virt_dma_desc *vd)
+{
+	struct pl08x_txd *txd = to_pl08x_txd(&vd->tx);
+	struct pl08x_dma_chan *plchan = to_pl08x_chan(vd->tx.chan);
+
+	dma_descriptor_unmap(&vd->tx);
+	if (!txd->done)
+		pl08x_release_mux(plchan);
+
+	pl08x_free_txd(plchan->host, txd);
+}
+
+static void pl08x_free_txd_list(struct pl08x_driver_data *pl08x,
+				struct pl08x_dma_chan *plchan)
+{
+	LIST_HEAD(head);
+
+	vchan_get_all_descriptors(&plchan->vc, &head);
+	vchan_dma_desc_free_list(&plchan->vc, &head);
+}
+
+/*
+ * The DMA ENGINE API
+ */
+static void pl08x_free_chan_resources(struct dma_chan *chan)
+{
+	/* Ensure all queued descriptors are freed */
+	vchan_free_chan_resources(to_virt_chan(chan));
+}
+
+static struct dma_async_tx_descriptor *pl08x_prep_dma_interrupt(
+		struct dma_chan *chan, unsigned long flags)
+{
+	struct dma_async_tx_descriptor *retval = NULL;
+
+	return retval;
+}
+
+/*
+ * Code accessing dma_async_is_complete() in a tight loop may give problems.
+ * If slaves are relying on interrupts to signal completion this function
+ * must not be called with interrupts disabled.
+ */
+static enum dma_status pl08x_dma_tx_status(struct dma_chan *chan,
+		dma_cookie_t cookie, struct dma_tx_state *txstate)
+{
+	struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
+	struct virt_dma_desc *vd;
+	unsigned long flags;
+	enum dma_status ret;
+	size_t bytes = 0;
+
+	ret = dma_cookie_status(chan, cookie, txstate);
+	if (ret == DMA_COMPLETE)
+		return ret;
+
+	/*
+	 * There's no point calculating the residue if there's
+	 * no txstate to store the value.
+	 */
+	if (!txstate) {
+		if (plchan->state == PL08X_CHAN_PAUSED)
+			ret = DMA_PAUSED;
+		return ret;
+	}
+
+	spin_lock_irqsave(&plchan->vc.lock, flags);
+	ret = dma_cookie_status(chan, cookie, txstate);
+	if (ret != DMA_COMPLETE) {
+		vd = vchan_find_desc(&plchan->vc, cookie);
+		if (vd) {
+			/* On the issued list, so hasn't been processed yet */
+			struct pl08x_txd *txd = to_pl08x_txd(&vd->tx);
+			struct pl08x_sg *dsg;
+
+			list_for_each_entry(dsg, &txd->dsg_list, node)
+				bytes += dsg->len;
+		} else {
+			bytes = pl08x_getbytes_chan(plchan);
+		}
+	}
+	spin_unlock_irqrestore(&plchan->vc.lock, flags);
+
+	/*
+	 * This cookie not complete yet
+	 * Get number of bytes left in the active transactions and queue
+	 */
+	dma_set_residue(txstate, bytes);
+
+	if (plchan->state == PL08X_CHAN_PAUSED && ret == DMA_IN_PROGRESS)
+		ret = DMA_PAUSED;
+
+	/* Whether waiting or running, we're in progress */
+	return ret;
+}
+
+/* PrimeCell DMA extension */
+struct burst_table {
+	u32 burstwords;
+	u32 reg;
+};
+
+static const struct burst_table burst_sizes[] = {
+	{
+		.burstwords = 256,
+		.reg = PL080_BSIZE_256,
+	},
+	{
+		.burstwords = 128,
+		.reg = PL080_BSIZE_128,
+	},
+	{
+		.burstwords = 64,
+		.reg = PL080_BSIZE_64,
+	},
+	{
+		.burstwords = 32,
+		.reg = PL080_BSIZE_32,
+	},
+	{
+		.burstwords = 16,
+		.reg = PL080_BSIZE_16,
+	},
+	{
+		.burstwords = 8,
+		.reg = PL080_BSIZE_8,
+	},
+	{
+		.burstwords = 4,
+		.reg = PL080_BSIZE_4,
+	},
+	{
+		.burstwords = 0,
+		.reg = PL080_BSIZE_1,
+	},
+};
+
+/*
+ * Given the source and destination available bus masks, select which
+ * will be routed to each port.  We try to have source and destination
+ * on separate ports, but always respect the allowable settings.
+ */
+static u32 pl08x_select_bus(u8 src, u8 dst)
+{
+	u32 cctl = 0;
+
+	if (!(dst & PL08X_AHB1) || ((dst & PL08X_AHB2) && (src & PL08X_AHB1)))
+		cctl |= PL080_CONTROL_DST_AHB2;
+	if (!(src & PL08X_AHB1) || ((src & PL08X_AHB2) && !(dst & PL08X_AHB2)))
+		cctl |= PL080_CONTROL_SRC_AHB2;
+
+	return cctl;
+}
+
+static u32 pl08x_cctl(u32 cctl)
+{
+	cctl &= ~(PL080_CONTROL_SRC_AHB2 | PL080_CONTROL_DST_AHB2 |
+		  PL080_CONTROL_SRC_INCR | PL080_CONTROL_DST_INCR |
+		  PL080_CONTROL_PROT_MASK);
+
+	/* Access the cell in privileged mode, non-bufferable, non-cacheable */
+	return cctl | PL080_CONTROL_PROT_SYS;
+}
+
+static u32 pl08x_width(enum dma_slave_buswidth width)
+{
+	switch (width) {
+	case DMA_SLAVE_BUSWIDTH_1_BYTE:
+		return PL080_WIDTH_8BIT;
+	case DMA_SLAVE_BUSWIDTH_2_BYTES:
+		return PL080_WIDTH_16BIT;
+	case DMA_SLAVE_BUSWIDTH_4_BYTES:
+		return PL080_WIDTH_32BIT;
+	default:
+		return ~0;
+	}
+}
+
+static u32 pl08x_burst(u32 maxburst)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(burst_sizes); i++)
+		if (burst_sizes[i].burstwords <= maxburst)
+			break;
+
+	return burst_sizes[i].reg;
+}
+
+static u32 pl08x_get_cctl(struct pl08x_dma_chan *plchan,
+	enum dma_slave_buswidth addr_width, u32 maxburst)
+{
+	u32 width, burst, cctl = 0;
+
+	width = pl08x_width(addr_width);
+	if (width == ~0)
+		return ~0;
+
+	cctl |= width << PL080_CONTROL_SWIDTH_SHIFT;
+	cctl |= width << PL080_CONTROL_DWIDTH_SHIFT;
+
+	/*
+	 * If this channel will only request single transfers, set this
+	 * down to ONE element.  Also select one element if no maxburst
+	 * is specified.
+	 */
+	if (plchan->cd->single)
+		maxburst = 1;
+
+	burst = pl08x_burst(maxburst);
+	cctl |= burst << PL080_CONTROL_SB_SIZE_SHIFT;
+	cctl |= burst << PL080_CONTROL_DB_SIZE_SHIFT;
+
+	return pl08x_cctl(cctl);
+}
+
+/*
+ * Slave transactions callback to the slave device to allow
+ * synchronization of slave DMA signals with the DMAC enable
+ */
+static void pl08x_issue_pending(struct dma_chan *chan)
+{
+	struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
+	unsigned long flags;
+
+	spin_lock_irqsave(&plchan->vc.lock, flags);
+	if (vchan_issue_pending(&plchan->vc)) {
+		if (!plchan->phychan && plchan->state != PL08X_CHAN_WAITING)
+			pl08x_phy_alloc_and_start(plchan);
+	}
+	spin_unlock_irqrestore(&plchan->vc.lock, flags);
+}
+
+static struct pl08x_txd *pl08x_get_txd(struct pl08x_dma_chan *plchan)
+{
+	struct pl08x_txd *txd = kzalloc(sizeof(*txd), GFP_NOWAIT);
+
+	if (txd) {
+		INIT_LIST_HEAD(&txd->dsg_list);
+
+		/* Always enable error and terminal interrupts */
+		txd->ccfg = PL080_CONFIG_ERR_IRQ_MASK |
+			    PL080_CONFIG_TC_IRQ_MASK;
+	}
+	return txd;
+}
+
+/*
+ * Initialize a descriptor to be used by memcpy submit
+ */
+static struct dma_async_tx_descriptor *pl08x_prep_dma_memcpy(
+		struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,
+		size_t len, unsigned long flags)
+{
+	struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
+	struct pl08x_driver_data *pl08x = plchan->host;
+	struct pl08x_txd *txd;
+	struct pl08x_sg *dsg;
+	int ret;
+
+	txd = pl08x_get_txd(plchan);
+	if (!txd) {
+		dev_err(&pl08x->adev->dev,
+			"%s no memory for descriptor\n", __func__);
+		return NULL;
+	}
+
+	dsg = kzalloc(sizeof(struct pl08x_sg), GFP_NOWAIT);
+	if (!dsg) {
+		pl08x_free_txd(pl08x, txd);
+		dev_err(&pl08x->adev->dev, "%s no memory for pl080 sg\n",
+				__func__);
+		return NULL;
+	}
+	list_add_tail(&dsg->node, &txd->dsg_list);
+
+	dsg->src_addr = src;
+	dsg->dst_addr = dest;
+	dsg->len = len;
+
+	/* Set platform data for m2m */
+	txd->ccfg |= PL080_FLOW_MEM2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT;
+	txd->cctl = pl08x->pd->memcpy_channel.cctl_memcpy &
+			~(PL080_CONTROL_DST_AHB2 | PL080_CONTROL_SRC_AHB2);
+
+	/* Both to be incremented or the code will break */
+	txd->cctl |= PL080_CONTROL_SRC_INCR | PL080_CONTROL_DST_INCR;
+
+	if (pl08x->vd->dualmaster)
+		txd->cctl |= pl08x_select_bus(pl08x->mem_buses,
+					      pl08x->mem_buses);
+
+	ret = pl08x_fill_llis_for_desc(plchan->host, txd);
+	if (!ret) {
+		pl08x_free_txd(pl08x, txd);
+		return NULL;
+	}
+
+	return vchan_tx_prep(&plchan->vc, &txd->vd, flags);
+}
+
+static struct pl08x_txd *pl08x_init_txd(
+		struct dma_chan *chan,
+		enum dma_transfer_direction direction,
+		dma_addr_t *slave_addr)
+{
+	struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
+	struct pl08x_driver_data *pl08x = plchan->host;
+	struct pl08x_txd *txd;
+	enum dma_slave_buswidth addr_width;
+	int ret, tmp;
+	u8 src_buses, dst_buses;
+	u32 maxburst, cctl;
+
+	txd = pl08x_get_txd(plchan);
+	if (!txd) {
+		dev_err(&pl08x->adev->dev, "%s no txd\n", __func__);
+		return NULL;
+	}
+
+	/*
+	 * Set up addresses, the PrimeCell configured address
+	 * will take precedence since this may configure the
+	 * channel target address dynamically at runtime.
+	 */
+	if (direction == DMA_MEM_TO_DEV) {
+		cctl = PL080_CONTROL_SRC_INCR;
+		*slave_addr = plchan->cfg.dst_addr;
+		addr_width = plchan->cfg.dst_addr_width;
+		maxburst = plchan->cfg.dst_maxburst;
+		src_buses = pl08x->mem_buses;
+		dst_buses = plchan->cd->periph_buses;
+	} else if (direction == DMA_DEV_TO_MEM) {
+		cctl = PL080_CONTROL_DST_INCR;
+		*slave_addr = plchan->cfg.src_addr;
+		addr_width = plchan->cfg.src_addr_width;
+		maxburst = plchan->cfg.src_maxburst;
+		src_buses = plchan->cd->periph_buses;
+		dst_buses = pl08x->mem_buses;
+	} else {
+		pl08x_free_txd(pl08x, txd);
+		dev_err(&pl08x->adev->dev,
+			"%s direction unsupported\n", __func__);
+		return NULL;
+	}
+
+	cctl |= pl08x_get_cctl(plchan, addr_width, maxburst);
+	if (cctl == ~0) {
+		pl08x_free_txd(pl08x, txd);
+		dev_err(&pl08x->adev->dev,
+			"DMA slave configuration botched?\n");
+		return NULL;
+	}
+
+	txd->cctl = cctl | pl08x_select_bus(src_buses, dst_buses);
+
+	if (plchan->cfg.device_fc)
+		tmp = (direction == DMA_MEM_TO_DEV) ? PL080_FLOW_MEM2PER_PER :
+			PL080_FLOW_PER2MEM_PER;
+	else
+		tmp = (direction == DMA_MEM_TO_DEV) ? PL080_FLOW_MEM2PER :
+			PL080_FLOW_PER2MEM;
+
+	txd->ccfg |= tmp << PL080_CONFIG_FLOW_CONTROL_SHIFT;
+
+	ret = pl08x_request_mux(plchan);
+	if (ret < 0) {
+		pl08x_free_txd(pl08x, txd);
+		dev_dbg(&pl08x->adev->dev,
+			"unable to mux for transfer on %s due to platform restrictions\n",
+			plchan->name);
+		return NULL;
+	}
+
+	dev_dbg(&pl08x->adev->dev, "allocated DMA request signal %d for xfer on %s\n",
+		 plchan->signal, plchan->name);
+
+	/* Assign the flow control signal to this channel */
+	if (direction == DMA_MEM_TO_DEV)
+		txd->ccfg |= plchan->signal << PL080_CONFIG_DST_SEL_SHIFT;
+	else
+		txd->ccfg |= plchan->signal << PL080_CONFIG_SRC_SEL_SHIFT;
+
+	return txd;
+}
+
+static int pl08x_tx_add_sg(struct pl08x_txd *txd,
+			   enum dma_transfer_direction direction,
+			   dma_addr_t slave_addr,
+			   dma_addr_t buf_addr,
+			   unsigned int len)
+{
+	struct pl08x_sg *dsg;
+
+	dsg = kzalloc(sizeof(struct pl08x_sg), GFP_NOWAIT);
+	if (!dsg)
+		return -ENOMEM;
+
+	list_add_tail(&dsg->node, &txd->dsg_list);
+
+	dsg->len = len;
+	if (direction == DMA_MEM_TO_DEV) {
+		dsg->src_addr = buf_addr;
+		dsg->dst_addr = slave_addr;
+	} else {
+		dsg->src_addr = slave_addr;
+		dsg->dst_addr = buf_addr;
+	}
+
+	return 0;
+}
+
+static struct dma_async_tx_descriptor *pl08x_prep_slave_sg(
+		struct dma_chan *chan, struct scatterlist *sgl,
+		unsigned int sg_len, enum dma_transfer_direction direction,
+		unsigned long flags, void *context)
+{
+	struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
+	struct pl08x_driver_data *pl08x = plchan->host;
+	struct pl08x_txd *txd;
+	struct scatterlist *sg;
+	int ret, tmp;
+	dma_addr_t slave_addr;
+
+	dev_dbg(&pl08x->adev->dev, "%s prepare transaction of %d bytes from %s\n",
+			__func__, sg_dma_len(sgl), plchan->name);
+
+	txd = pl08x_init_txd(chan, direction, &slave_addr);
+	if (!txd)
+		return NULL;
+
+	for_each_sg(sgl, sg, sg_len, tmp) {
+		ret = pl08x_tx_add_sg(txd, direction, slave_addr,
+				      sg_dma_address(sg),
+				      sg_dma_len(sg));
+		if (ret) {
+			pl08x_release_mux(plchan);
+			pl08x_free_txd(pl08x, txd);
+			dev_err(&pl08x->adev->dev, "%s no mem for pl080 sg\n",
+					__func__);
+			return NULL;
+		}
+	}
+
+	ret = pl08x_fill_llis_for_desc(plchan->host, txd);
+	if (!ret) {
+		pl08x_release_mux(plchan);
+		pl08x_free_txd(pl08x, txd);
+		return NULL;
+	}
+
+	return vchan_tx_prep(&plchan->vc, &txd->vd, flags);
+}
+
+static struct dma_async_tx_descriptor *pl08x_prep_dma_cyclic(
+		struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len,
+		size_t period_len, enum dma_transfer_direction direction,
+		unsigned long flags)
+{
+	struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
+	struct pl08x_driver_data *pl08x = plchan->host;
+	struct pl08x_txd *txd;
+	int ret, tmp;
+	dma_addr_t slave_addr;
+
+	dev_dbg(&pl08x->adev->dev,
+		"%s prepare cyclic transaction of %zd/%zd bytes %s %s\n",
+		__func__, period_len, buf_len,
+		direction == DMA_MEM_TO_DEV ? "to" : "from",
+		plchan->name);
+
+	txd = pl08x_init_txd(chan, direction, &slave_addr);
+	if (!txd)
+		return NULL;
+
+	txd->cyclic = true;
+	txd->cctl |= PL080_CONTROL_TC_IRQ_EN;
+	for (tmp = 0; tmp < buf_len; tmp += period_len) {
+		ret = pl08x_tx_add_sg(txd, direction, slave_addr,
+				      buf_addr + tmp, period_len);
+		if (ret) {
+			pl08x_release_mux(plchan);
+			pl08x_free_txd(pl08x, txd);
+			return NULL;
+		}
+	}
+
+	ret = pl08x_fill_llis_for_desc(plchan->host, txd);
+	if (!ret) {
+		pl08x_release_mux(plchan);
+		pl08x_free_txd(pl08x, txd);
+		return NULL;
+	}
+
+	return vchan_tx_prep(&plchan->vc, &txd->vd, flags);
+}
+
+static int pl08x_config(struct dma_chan *chan,
+			struct dma_slave_config *config)
+{
+	struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
+	struct pl08x_driver_data *pl08x = plchan->host;
+
+	if (!plchan->slave)
+		return -EINVAL;
+
+	/* Reject definitely invalid configurations */
+	if (config->src_addr_width == DMA_SLAVE_BUSWIDTH_8_BYTES ||
+	    config->dst_addr_width == DMA_SLAVE_BUSWIDTH_8_BYTES)
+		return -EINVAL;
+
+	if (config->device_fc && pl08x->vd->pl080s) {
+		dev_err(&pl08x->adev->dev,
+			"%s: PL080S does not support peripheral flow control\n",
+			__func__);
+		return -EINVAL;
+	}
+
+	plchan->cfg = *config;
+
+	return 0;
+}
+
+static int pl08x_terminate_all(struct dma_chan *chan)
+{
+	struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
+	struct pl08x_driver_data *pl08x = plchan->host;
+	unsigned long flags;
+
+	spin_lock_irqsave(&plchan->vc.lock, flags);
+	if (!plchan->phychan && !plchan->at) {
+		spin_unlock_irqrestore(&plchan->vc.lock, flags);
+		return 0;
+	}
+
+	plchan->state = PL08X_CHAN_IDLE;
+
+	if (plchan->phychan) {
+		/*
+		 * Mark physical channel as free and free any slave
+		 * signal
+		 */
+		pl08x_phy_free(plchan);
+	}
+	/* Dequeue jobs and free LLIs */
+	if (plchan->at) {
+		pl08x_desc_free(&plchan->at->vd);
+		plchan->at = NULL;
+	}
+	/* Dequeue jobs not yet fired as well */
+	pl08x_free_txd_list(pl08x, plchan);
+
+	spin_unlock_irqrestore(&plchan->vc.lock, flags);
+
+	return 0;
+}
+
+static int pl08x_pause(struct dma_chan *chan)
+{
+	struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
+	unsigned long flags;
+
+	/*
+	 * Anything succeeds on channels with no physical allocation and
+	 * no queued transfers.
+	 */
+	spin_lock_irqsave(&plchan->vc.lock, flags);
+	if (!plchan->phychan && !plchan->at) {
+		spin_unlock_irqrestore(&plchan->vc.lock, flags);
+		return 0;
+	}
+
+	pl08x_pause_phy_chan(plchan->phychan);
+	plchan->state = PL08X_CHAN_PAUSED;
+
+	spin_unlock_irqrestore(&plchan->vc.lock, flags);
+
+	return 0;
+}
+
+static int pl08x_resume(struct dma_chan *chan)
+{
+	struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
+	unsigned long flags;
+
+	/*
+	 * Anything succeeds on channels with no physical allocation and
+	 * no queued transfers.
+	 */
+	spin_lock_irqsave(&plchan->vc.lock, flags);
+	if (!plchan->phychan && !plchan->at) {
+		spin_unlock_irqrestore(&plchan->vc.lock, flags);
+		return 0;
+	}
+
+	pl08x_resume_phy_chan(plchan->phychan);
+	plchan->state = PL08X_CHAN_RUNNING;
+
+	spin_unlock_irqrestore(&plchan->vc.lock, flags);
+
+	return 0;
+}
+
+bool pl08x_filter_id(struct dma_chan *chan, void *chan_id)
+{
+	struct pl08x_dma_chan *plchan;
+	char *name = chan_id;
+
+	/* Reject channels for devices not bound to this driver */
+	if (chan->device->dev->driver != &pl08x_amba_driver.drv)
+		return false;
+
+	plchan = to_pl08x_chan(chan);
+
+	/* Check that the channel is not taken! */
+	if (!strcmp(plchan->name, name))
+		return true;
+
+	return false;
+}
+EXPORT_SYMBOL_GPL(pl08x_filter_id);
+
+/*
+ * Just check that the device is there and active
+ * TODO: turn this bit on/off depending on the number of physical channels
+ * actually used, if it is zero... well shut it off. That will save some
+ * power. Cut the clock at the same time.
+ */
+static void pl08x_ensure_on(struct pl08x_driver_data *pl08x)
+{
+	/* The Nomadik variant does not have the config register */
+	if (pl08x->vd->nomadik)
+		return;
+	writel(PL080_CONFIG_ENABLE, pl08x->base + PL080_CONFIG);
+}
+
+static irqreturn_t pl08x_irq(int irq, void *dev)
+{
+	struct pl08x_driver_data *pl08x = dev;
+	u32 mask = 0, err, tc, i;
+
+	/* check & clear - ERR & TC interrupts */
+	err = readl(pl08x->base + PL080_ERR_STATUS);
+	if (err) {
+		dev_err(&pl08x->adev->dev, "%s error interrupt, register value 0x%08x\n",
+			__func__, err);
+		writel(err, pl08x->base + PL080_ERR_CLEAR);
+	}
+	tc = readl(pl08x->base + PL080_TC_STATUS);
+	if (tc)
+		writel(tc, pl08x->base + PL080_TC_CLEAR);
+
+	if (!err && !tc)
+		return IRQ_NONE;
+
+	for (i = 0; i < pl08x->vd->channels; i++) {
+		if (((1 << i) & err) || ((1 << i) & tc)) {
+			/* Locate physical channel */
+			struct pl08x_phy_chan *phychan = &pl08x->phy_chans[i];
+			struct pl08x_dma_chan *plchan = phychan->serving;
+			struct pl08x_txd *tx;
+
+			if (!plchan) {
+				dev_err(&pl08x->adev->dev,
+					"%s Error TC interrupt on unused channel: 0x%08x\n",
+					__func__, i);
+				continue;
+			}
+
+			spin_lock(&plchan->vc.lock);
+			tx = plchan->at;
+			if (tx && tx->cyclic) {
+				vchan_cyclic_callback(&tx->vd);
+			} else if (tx) {
+				plchan->at = NULL;
+				/*
+				 * This descriptor is done, release its mux
+				 * reservation.
+				 */
+				pl08x_release_mux(plchan);
+				tx->done = true;
+				vchan_cookie_complete(&tx->vd);
+
+				/*
+				 * And start the next descriptor (if any),
+				 * otherwise free this channel.
+				 */
+				if (vchan_next_desc(&plchan->vc))
+					pl08x_start_next_txd(plchan);
+				else
+					pl08x_phy_free(plchan);
+			}
+			spin_unlock(&plchan->vc.lock);
+
+			mask |= (1 << i);
+		}
+	}
+
+	return mask ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static void pl08x_dma_slave_init(struct pl08x_dma_chan *chan)
+{
+	chan->slave = true;
+	chan->name = chan->cd->bus_id;
+	chan->cfg.src_addr = chan->cd->addr;
+	chan->cfg.dst_addr = chan->cd->addr;
+}
+
+/*
+ * Initialise the DMAC memcpy/slave channels.
+ * Make a local wrapper to hold required data
+ */
+static int pl08x_dma_init_virtual_channels(struct pl08x_driver_data *pl08x,
+		struct dma_device *dmadev, unsigned int channels, bool slave)
+{
+	struct pl08x_dma_chan *chan;
+	int i;
+
+	INIT_LIST_HEAD(&dmadev->channels);
+
+	/*
+	 * Register as many many memcpy as we have physical channels,
+	 * we won't always be able to use all but the code will have
+	 * to cope with that situation.
+	 */
+	for (i = 0; i < channels; i++) {
+		chan = kzalloc(sizeof(*chan), GFP_KERNEL);
+		if (!chan) {
+			dev_err(&pl08x->adev->dev,
+				"%s no memory for channel\n", __func__);
+			return -ENOMEM;
+		}
+
+		chan->host = pl08x;
+		chan->state = PL08X_CHAN_IDLE;
+		chan->signal = -1;
+
+		if (slave) {
+			chan->cd = &pl08x->pd->slave_channels[i];
+			pl08x_dma_slave_init(chan);
+		} else {
+			chan->cd = &pl08x->pd->memcpy_channel;
+			chan->name = kasprintf(GFP_KERNEL, "memcpy%d", i);
+			if (!chan->name) {
+				kfree(chan);
+				return -ENOMEM;
+			}
+		}
+		dev_dbg(&pl08x->adev->dev,
+			 "initialize virtual channel \"%s\"\n",
+			 chan->name);
+
+		chan->vc.desc_free = pl08x_desc_free;
+		vchan_init(&chan->vc, dmadev);
+	}
+	dev_info(&pl08x->adev->dev, "initialized %d virtual %s channels\n",
+		 i, slave ? "slave" : "memcpy");
+	return i;
+}
+
+static void pl08x_free_virtual_channels(struct dma_device *dmadev)
+{
+	struct pl08x_dma_chan *chan = NULL;
+	struct pl08x_dma_chan *next;
+
+	list_for_each_entry_safe(chan,
+				 next, &dmadev->channels, vc.chan.device_node) {
+		list_del(&chan->vc.chan.device_node);
+		kfree(chan);
+	}
+}
+
+#ifdef CONFIG_DEBUG_FS
+static const char *pl08x_state_str(enum pl08x_dma_chan_state state)
+{
+	switch (state) {
+	case PL08X_CHAN_IDLE:
+		return "idle";
+	case PL08X_CHAN_RUNNING:
+		return "running";
+	case PL08X_CHAN_PAUSED:
+		return "paused";
+	case PL08X_CHAN_WAITING:
+		return "waiting";
+	default:
+		break;
+	}
+	return "UNKNOWN STATE";
+}
+
+static int pl08x_debugfs_show(struct seq_file *s, void *data)
+{
+	struct pl08x_driver_data *pl08x = s->private;
+	struct pl08x_dma_chan *chan;
+	struct pl08x_phy_chan *ch;
+	unsigned long flags;
+	int i;
+
+	seq_printf(s, "PL08x physical channels:\n");
+	seq_printf(s, "CHANNEL:\tUSER:\n");
+	seq_printf(s, "--------\t-----\n");
+	for (i = 0; i < pl08x->vd->channels; i++) {
+		struct pl08x_dma_chan *virt_chan;
+
+		ch = &pl08x->phy_chans[i];
+
+		spin_lock_irqsave(&ch->lock, flags);
+		virt_chan = ch->serving;
+
+		seq_printf(s, "%d\t\t%s%s\n",
+			   ch->id,
+			   virt_chan ? virt_chan->name : "(none)",
+			   ch->locked ? " LOCKED" : "");
+
+		spin_unlock_irqrestore(&ch->lock, flags);
+	}
+
+	seq_printf(s, "\nPL08x virtual memcpy channels:\n");
+	seq_printf(s, "CHANNEL:\tSTATE:\n");
+	seq_printf(s, "--------\t------\n");
+	list_for_each_entry(chan, &pl08x->memcpy.channels, vc.chan.device_node) {
+		seq_printf(s, "%s\t\t%s\n", chan->name,
+			   pl08x_state_str(chan->state));
+	}
+
+	seq_printf(s, "\nPL08x virtual slave channels:\n");
+	seq_printf(s, "CHANNEL:\tSTATE:\n");
+	seq_printf(s, "--------\t------\n");
+	list_for_each_entry(chan, &pl08x->slave.channels, vc.chan.device_node) {
+		seq_printf(s, "%s\t\t%s\n", chan->name,
+			   pl08x_state_str(chan->state));
+	}
+
+	return 0;
+}
+
+static int pl08x_debugfs_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, pl08x_debugfs_show, inode->i_private);
+}
+
+static const struct file_operations pl08x_debugfs_operations = {
+	.open		= pl08x_debugfs_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static void init_pl08x_debugfs(struct pl08x_driver_data *pl08x)
+{
+	/* Expose a simple debugfs interface to view all clocks */
+	(void) debugfs_create_file(dev_name(&pl08x->adev->dev),
+			S_IFREG | S_IRUGO, NULL, pl08x,
+			&pl08x_debugfs_operations);
+}
+
+#else
+static inline void init_pl08x_debugfs(struct pl08x_driver_data *pl08x)
+{
+}
+#endif
+
+static int pl08x_probe(struct amba_device *adev, const struct amba_id *id)
+{
+	struct pl08x_driver_data *pl08x;
+	const struct vendor_data *vd = id->data;
+	u32 tsfr_size;
+	int ret = 0;
+	int i;
+
+	ret = amba_request_regions(adev, NULL);
+	if (ret)
+		return ret;
+
+	/* Ensure that we can do DMA */
+	ret = dma_set_mask_and_coherent(&adev->dev, DMA_BIT_MASK(32));
+	if (ret)
+		goto out_no_pl08x;
+
+	/* Create the driver state holder */
+	pl08x = kzalloc(sizeof(*pl08x), GFP_KERNEL);
+	if (!pl08x) {
+		ret = -ENOMEM;
+		goto out_no_pl08x;
+	}
+
+	/* Initialize memcpy engine */
+	dma_cap_set(DMA_MEMCPY, pl08x->memcpy.cap_mask);
+	pl08x->memcpy.dev = &adev->dev;
+	pl08x->memcpy.device_free_chan_resources = pl08x_free_chan_resources;
+	pl08x->memcpy.device_prep_dma_memcpy = pl08x_prep_dma_memcpy;
+	pl08x->memcpy.device_prep_dma_interrupt = pl08x_prep_dma_interrupt;
+	pl08x->memcpy.device_tx_status = pl08x_dma_tx_status;
+	pl08x->memcpy.device_issue_pending = pl08x_issue_pending;
+	pl08x->memcpy.device_config = pl08x_config;
+	pl08x->memcpy.device_pause = pl08x_pause;
+	pl08x->memcpy.device_resume = pl08x_resume;
+	pl08x->memcpy.device_terminate_all = pl08x_terminate_all;
+	pl08x->memcpy.src_addr_widths = PL80X_DMA_BUSWIDTHS;
+	pl08x->memcpy.dst_addr_widths = PL80X_DMA_BUSWIDTHS;
+	pl08x->memcpy.directions = BIT(DMA_MEM_TO_MEM);
+	pl08x->memcpy.residue_granularity = DMA_RESIDUE_GRANULARITY_SEGMENT;
+
+	/* Initialize slave engine */
+	dma_cap_set(DMA_SLAVE, pl08x->slave.cap_mask);
+	dma_cap_set(DMA_CYCLIC, pl08x->slave.cap_mask);
+	pl08x->slave.dev = &adev->dev;
+	pl08x->slave.device_free_chan_resources = pl08x_free_chan_resources;
+	pl08x->slave.device_prep_dma_interrupt = pl08x_prep_dma_interrupt;
+	pl08x->slave.device_tx_status = pl08x_dma_tx_status;
+	pl08x->slave.device_issue_pending = pl08x_issue_pending;
+	pl08x->slave.device_prep_slave_sg = pl08x_prep_slave_sg;
+	pl08x->slave.device_prep_dma_cyclic = pl08x_prep_dma_cyclic;
+	pl08x->slave.device_config = pl08x_config;
+	pl08x->slave.device_pause = pl08x_pause;
+	pl08x->slave.device_resume = pl08x_resume;
+	pl08x->slave.device_terminate_all = pl08x_terminate_all;
+	pl08x->slave.src_addr_widths = PL80X_DMA_BUSWIDTHS;
+	pl08x->slave.dst_addr_widths = PL80X_DMA_BUSWIDTHS;
+	pl08x->slave.directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
+	pl08x->slave.residue_granularity = DMA_RESIDUE_GRANULARITY_SEGMENT;
+
+	/* Get the platform data */
+	pl08x->pd = dev_get_platdata(&adev->dev);
+	if (!pl08x->pd) {
+		dev_err(&adev->dev, "no platform data supplied\n");
+		ret = -EINVAL;
+		goto out_no_platdata;
+	}
+
+	/* Assign useful pointers to the driver state */
+	pl08x->adev = adev;
+	pl08x->vd = vd;
+
+	/* By default, AHB1 only.  If dualmaster, from platform */
+	pl08x->lli_buses = PL08X_AHB1;
+	pl08x->mem_buses = PL08X_AHB1;
+	if (pl08x->vd->dualmaster) {
+		pl08x->lli_buses = pl08x->pd->lli_buses;
+		pl08x->mem_buses = pl08x->pd->mem_buses;
+	}
+
+	if (vd->pl080s)
+		pl08x->lli_words = PL080S_LLI_WORDS;
+	else
+		pl08x->lli_words = PL080_LLI_WORDS;
+	tsfr_size = MAX_NUM_TSFR_LLIS * pl08x->lli_words * sizeof(u32);
+
+	/* A DMA memory pool for LLIs, align on 1-byte boundary */
+	pl08x->pool = dma_pool_create(DRIVER_NAME, &pl08x->adev->dev,
+						tsfr_size, PL08X_ALIGN, 0);
+	if (!pl08x->pool) {
+		ret = -ENOMEM;
+		goto out_no_lli_pool;
+	}
+
+	pl08x->base = ioremap(adev->res.start, resource_size(&adev->res));
+	if (!pl08x->base) {
+		ret = -ENOMEM;
+		goto out_no_ioremap;
+	}
+
+	/* Turn on the PL08x */
+	pl08x_ensure_on(pl08x);
+
+	/* Attach the interrupt handler */
+	writel(0x000000FF, pl08x->base + PL080_ERR_CLEAR);
+	writel(0x000000FF, pl08x->base + PL080_TC_CLEAR);
+
+	ret = request_irq(adev->irq[0], pl08x_irq, 0, DRIVER_NAME, pl08x);
+	if (ret) {
+		dev_err(&adev->dev, "%s failed to request interrupt %d\n",
+			__func__, adev->irq[0]);
+		goto out_no_irq;
+	}
+
+	/* Initialize physical channels */
+	pl08x->phy_chans = kzalloc((vd->channels * sizeof(*pl08x->phy_chans)),
+			GFP_KERNEL);
+	if (!pl08x->phy_chans) {
+		dev_err(&adev->dev, "%s failed to allocate "
+			"physical channel holders\n",
+			__func__);
+		ret = -ENOMEM;
+		goto out_no_phychans;
+	}
+
+	for (i = 0; i < vd->channels; i++) {
+		struct pl08x_phy_chan *ch = &pl08x->phy_chans[i];
+
+		ch->id = i;
+		ch->base = pl08x->base + PL080_Cx_BASE(i);
+		ch->reg_config = ch->base + vd->config_offset;
+		spin_lock_init(&ch->lock);
+
+		/*
+		 * Nomadik variants can have channels that are locked
+		 * down for the secure world only. Lock up these channels
+		 * by perpetually serving a dummy virtual channel.
+		 */
+		if (vd->nomadik) {
+			u32 val;
+
+			val = readl(ch->reg_config);
+			if (val & (PL080N_CONFIG_ITPROT | PL080N_CONFIG_SECPROT)) {
+				dev_info(&adev->dev, "physical channel %d reserved for secure access only\n", i);
+				ch->locked = true;
+			}
+		}
+
+		dev_dbg(&adev->dev, "physical channel %d is %s\n",
+			i, pl08x_phy_channel_busy(ch) ? "BUSY" : "FREE");
+	}
+
+	/* Register as many memcpy channels as there are physical channels */
+	ret = pl08x_dma_init_virtual_channels(pl08x, &pl08x->memcpy,
+					      pl08x->vd->channels, false);
+	if (ret <= 0) {
+		dev_warn(&pl08x->adev->dev,
+			 "%s failed to enumerate memcpy channels - %d\n",
+			 __func__, ret);
+		goto out_no_memcpy;
+	}
+
+	/* Register slave channels */
+	ret = pl08x_dma_init_virtual_channels(pl08x, &pl08x->slave,
+			pl08x->pd->num_slave_channels, true);
+	if (ret < 0) {
+		dev_warn(&pl08x->adev->dev,
+			"%s failed to enumerate slave channels - %d\n",
+				__func__, ret);
+		goto out_no_slave;
+	}
+
+	ret = dma_async_device_register(&pl08x->memcpy);
+	if (ret) {
+		dev_warn(&pl08x->adev->dev,
+			"%s failed to register memcpy as an async device - %d\n",
+			__func__, ret);
+		goto out_no_memcpy_reg;
+	}
+
+	ret = dma_async_device_register(&pl08x->slave);
+	if (ret) {
+		dev_warn(&pl08x->adev->dev,
+			"%s failed to register slave as an async device - %d\n",
+			__func__, ret);
+		goto out_no_slave_reg;
+	}
+
+	amba_set_drvdata(adev, pl08x);
+	init_pl08x_debugfs(pl08x);
+	dev_info(&pl08x->adev->dev, "DMA: PL%03x%s rev%u at 0x%08llx irq %d\n",
+		 amba_part(adev), pl08x->vd->pl080s ? "s" : "", amba_rev(adev),
+		 (unsigned long long)adev->res.start, adev->irq[0]);
+
+	return 0;
+
+out_no_slave_reg:
+	dma_async_device_unregister(&pl08x->memcpy);
+out_no_memcpy_reg:
+	pl08x_free_virtual_channels(&pl08x->slave);
+out_no_slave:
+	pl08x_free_virtual_channels(&pl08x->memcpy);
+out_no_memcpy:
+	kfree(pl08x->phy_chans);
+out_no_phychans:
+	free_irq(adev->irq[0], pl08x);
+out_no_irq:
+	iounmap(pl08x->base);
+out_no_ioremap:
+	dma_pool_destroy(pl08x->pool);
+out_no_lli_pool:
+out_no_platdata:
+	kfree(pl08x);
+out_no_pl08x:
+	amba_release_regions(adev);
+	return ret;
+}
+
+/* PL080 has 8 channels and the PL080 have just 2 */
+static struct vendor_data vendor_pl080 = {
+	.config_offset = PL080_CH_CONFIG,
+	.channels = 8,
+	.dualmaster = true,
+	.max_transfer_size = PL080_CONTROL_TRANSFER_SIZE_MASK,
+};
+
+static struct vendor_data vendor_nomadik = {
+	.config_offset = PL080_CH_CONFIG,
+	.channels = 8,
+	.dualmaster = true,
+	.nomadik = true,
+	.max_transfer_size = PL080_CONTROL_TRANSFER_SIZE_MASK,
+};
+
+static struct vendor_data vendor_pl080s = {
+	.config_offset = PL080S_CH_CONFIG,
+	.channels = 8,
+	.pl080s = true,
+	.max_transfer_size = PL080S_CONTROL_TRANSFER_SIZE_MASK,
+};
+
+static struct vendor_data vendor_pl081 = {
+	.config_offset = PL080_CH_CONFIG,
+	.channels = 2,
+	.dualmaster = false,
+	.max_transfer_size = PL080_CONTROL_TRANSFER_SIZE_MASK,
+};
+
+static struct amba_id pl08x_ids[] = {
+	/* Samsung PL080S variant */
+	{
+		.id	= 0x0a141080,
+		.mask	= 0xffffffff,
+		.data	= &vendor_pl080s,
+	},
+	/* PL080 */
+	{
+		.id	= 0x00041080,
+		.mask	= 0x000fffff,
+		.data	= &vendor_pl080,
+	},
+	/* PL081 */
+	{
+		.id	= 0x00041081,
+		.mask	= 0x000fffff,
+		.data	= &vendor_pl081,
+	},
+	/* Nomadik 8815 PL080 variant */
+	{
+		.id	= 0x00280080,
+		.mask	= 0x00ffffff,
+		.data	= &vendor_nomadik,
+	},
+	{ 0, 0 },
+};
+
+MODULE_DEVICE_TABLE(amba, pl08x_ids);
+
+static struct amba_driver pl08x_amba_driver = {
+	.drv.name	= DRIVER_NAME,
+	.id_table	= pl08x_ids,
+	.probe		= pl08x_probe,
+};
+
+static int __init pl08x_init(void)
+{
+	int retval;
+	retval = amba_driver_register(&pl08x_amba_driver);
+	if (retval)
+		printk(KERN_WARNING DRIVER_NAME
+		       "failed to register as an AMBA device (%d)\n",
+		       retval);
+	return retval;
+}
+subsys_initcall(pl08x_init);