Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

1 files changed, 239 insertions, 0 deletions

diff --git a/kernel/drivers/cpufreq/exynos-cpufreq.c b/kernel/drivers/cpufreq/exynos-cpufreq.c
new file mode 100644
index 000000000..82d2fbb20
--- /dev/null
+++ b/kernel/drivers/cpufreq/exynos-cpufreq.c
@@ -0,0 +1,239 @@
+/*
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * EXYNOS - CPU frequency scaling support for EXYNOS series
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/regulator/consumer.h>
+#include <linux/cpufreq.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/cpu_cooling.h>
+#include <linux/cpu.h>
+
+#include "exynos-cpufreq.h"
+
+static struct exynos_dvfs_info *exynos_info;
+static struct thermal_cooling_device *cdev;
+static struct regulator *arm_regulator;
+static unsigned int locking_frequency;
+
+static int exynos_cpufreq_get_index(unsigned int freq)
+{
+	struct cpufreq_frequency_table *freq_table = exynos_info->freq_table;
+	struct cpufreq_frequency_table *pos;
+
+	cpufreq_for_each_entry(pos, freq_table)
+		if (pos->frequency == freq)
+			break;
+
+	if (pos->frequency == CPUFREQ_TABLE_END)
+		return -EINVAL;
+
+	return pos - freq_table;
+}
+
+static int exynos_cpufreq_scale(unsigned int target_freq)
+{
+	struct cpufreq_frequency_table *freq_table = exynos_info->freq_table;
+	unsigned int *volt_table = exynos_info->volt_table;
+	struct cpufreq_policy *policy = cpufreq_cpu_get(0);
+	unsigned int arm_volt, safe_arm_volt = 0;
+	unsigned int mpll_freq_khz = exynos_info->mpll_freq_khz;
+	struct device *dev = exynos_info->dev;
+	unsigned int old_freq;
+	int index, old_index;
+	int ret = 0;
+
+	old_freq = policy->cur;
+
+	/*
+	 * The policy max have been changed so that we cannot get proper
+	 * old_index with cpufreq_frequency_table_target(). Thus, ignore
+	 * policy and get the index from the raw frequency table.
+	 */
+	old_index = exynos_cpufreq_get_index(old_freq);
+	if (old_index < 0) {
+		ret = old_index;
+		goto out;
+	}
+
+	index = exynos_cpufreq_get_index(target_freq);
+	if (index < 0) {
+		ret = index;
+		goto out;
+	}
+
+	/*
+	 * ARM clock source will be changed APLL to MPLL temporary
+	 * To support this level, need to control regulator for
+	 * required voltage level
+	 */
+	if (exynos_info->need_apll_change != NULL) {
+		if (exynos_info->need_apll_change(old_index, index) &&
+		   (freq_table[index].frequency < mpll_freq_khz) &&
+		   (freq_table[old_index].frequency < mpll_freq_khz))
+			safe_arm_volt = volt_table[exynos_info->pll_safe_idx];
+	}
+	arm_volt = volt_table[index];
+
+	/* When the new frequency is higher than current frequency */
+	if ((target_freq > old_freq) && !safe_arm_volt) {
+		/* Firstly, voltage up to increase frequency */
+		ret = regulator_set_voltage(arm_regulator, arm_volt, arm_volt);
+		if (ret) {
+			dev_err(dev, "failed to set cpu voltage to %d\n",
+				arm_volt);
+			return ret;
+		}
+	}
+
+	if (safe_arm_volt) {
+		ret = regulator_set_voltage(arm_regulator, safe_arm_volt,
+				      safe_arm_volt);
+		if (ret) {
+			dev_err(dev, "failed to set cpu voltage to %d\n",
+				safe_arm_volt);
+			return ret;
+		}
+	}
+
+	exynos_info->set_freq(old_index, index);
+
+	/* When the new frequency is lower than current frequency */
+	if ((target_freq < old_freq) ||
+	   ((target_freq > old_freq) && safe_arm_volt)) {
+		/* down the voltage after frequency change */
+		ret = regulator_set_voltage(arm_regulator, arm_volt,
+				arm_volt);
+		if (ret) {
+			dev_err(dev, "failed to set cpu voltage to %d\n",
+				arm_volt);
+			goto out;
+		}
+	}
+
+out:
+	cpufreq_cpu_put(policy);
+
+	return ret;
+}
+
+static int exynos_target(struct cpufreq_policy *policy, unsigned int index)
+{
+	return exynos_cpufreq_scale(exynos_info->freq_table[index].frequency);
+}
+
+static int exynos_cpufreq_cpu_init(struct cpufreq_policy *policy)
+{
+	policy->clk = exynos_info->cpu_clk;
+	policy->suspend_freq = locking_frequency;
+	return cpufreq_generic_init(policy, exynos_info->freq_table, 100000);
+}
+
+static struct cpufreq_driver exynos_driver = {
+	.flags		= CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK,
+	.verify		= cpufreq_generic_frequency_table_verify,
+	.target_index	= exynos_target,
+	.get		= cpufreq_generic_get,
+	.init		= exynos_cpufreq_cpu_init,
+	.name		= "exynos_cpufreq",
+	.attr		= cpufreq_generic_attr,
+#ifdef CONFIG_ARM_EXYNOS_CPU_FREQ_BOOST_SW
+	.boost_supported = true,
+#endif
+#ifdef CONFIG_PM
+	.suspend	= cpufreq_generic_suspend,
+#endif
+};
+
+static int exynos_cpufreq_probe(struct platform_device *pdev)
+{
+	struct device_node *cpu0;
+	int ret = -EINVAL;
+
+	exynos_info = kzalloc(sizeof(*exynos_info), GFP_KERNEL);
+	if (!exynos_info)
+		return -ENOMEM;
+
+	exynos_info->dev = &pdev->dev;
+
+	if (of_machine_is_compatible("samsung,exynos4210")) {
+		exynos_info->type = EXYNOS_SOC_4210;
+		ret = exynos4210_cpufreq_init(exynos_info);
+	} else if (of_machine_is_compatible("samsung,exynos4212")) {
+		exynos_info->type = EXYNOS_SOC_4212;
+		ret = exynos4x12_cpufreq_init(exynos_info);
+	} else if (of_machine_is_compatible("samsung,exynos4412")) {
+		exynos_info->type = EXYNOS_SOC_4412;
+		ret = exynos4x12_cpufreq_init(exynos_info);
+	} else if (of_machine_is_compatible("samsung,exynos5250")) {
+		exynos_info->type = EXYNOS_SOC_5250;
+		ret = exynos5250_cpufreq_init(exynos_info);
+	} else {
+		pr_err("%s: Unknown SoC type\n", __func__);
+		return -ENODEV;
+	}
+
+	if (ret)
+		goto err_vdd_arm;
+
+	if (exynos_info->set_freq == NULL) {
+		dev_err(&pdev->dev, "No set_freq function (ERR)\n");
+		goto err_vdd_arm;
+	}
+
+	arm_regulator = regulator_get(NULL, "vdd_arm");
+	if (IS_ERR(arm_regulator)) {
+		dev_err(&pdev->dev, "failed to get resource vdd_arm\n");
+		goto err_vdd_arm;
+	}
+
+	/* Done here as we want to capture boot frequency */
+	locking_frequency = clk_get_rate(exynos_info->cpu_clk) / 1000;
+
+	ret = cpufreq_register_driver(&exynos_driver);
+	if (ret)
+		goto err_cpufreq_reg;
+
+	cpu0 = of_get_cpu_node(0, NULL);
+	if (!cpu0) {
+		pr_err("failed to find cpu0 node\n");
+		return 0;
+	}
+
+	if (of_find_property(cpu0, "#cooling-cells", NULL)) {
+		cdev = of_cpufreq_cooling_register(cpu0,
+						   cpu_present_mask);
+		if (IS_ERR(cdev))
+			pr_err("running cpufreq without cooling device: %ld\n",
+			       PTR_ERR(cdev));
+	}
+
+	return 0;
+
+err_cpufreq_reg:
+	dev_err(&pdev->dev, "failed to register cpufreq driver\n");
+	regulator_put(arm_regulator);
+err_vdd_arm:
+	kfree(exynos_info);
+	return -EINVAL;
+}
+
+static struct platform_driver exynos_cpufreq_platdrv = {
+	.driver = {
+		.name	= "exynos-cpufreq",
+	},
+	.probe = exynos_cpufreq_probe,
+};
+module_platform_driver(exynos_cpufreq_platdrv);