summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/clk/bcm/clk-ns2.c
diff options
context:
space:
mode:
authorJosé Pekkarinen <jose.pekkarinen@nokia.com>2016-04-11 10:41:07 +0300
committerJosé Pekkarinen <jose.pekkarinen@nokia.com>2016-04-13 08:17:18 +0300
commite09b41010ba33a20a87472ee821fa407a5b8da36 (patch)
treed10dc367189862e7ca5c592f033dc3726e1df4e3 /kernel/drivers/clk/bcm/clk-ns2.c
parentf93b97fd65072de626c074dbe099a1fff05ce060 (diff)
These changes are the raw update to linux-4.4.6-rt14. Kernel sources
are taken from kernel.org, and rt patch from the rt wiki download page. During the rebasing, the following patch collided: Force tick interrupt and get rid of softirq magic(I70131fb85). Collisions have been removed because its logic was found on the source already. Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769 Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>
Diffstat (limited to 'kernel/drivers/clk/bcm/clk-ns2.c')
-rw-r--r--kernel/drivers/clk/bcm/clk-ns2.c288
1 files changed, 288 insertions, 0 deletions
diff --git a/kernel/drivers/clk/bcm/clk-ns2.c b/kernel/drivers/clk/bcm/clk-ns2.c
new file mode 100644
index 000000000..a564e9248
--- /dev/null
+++ b/kernel/drivers/clk/bcm/clk-ns2.c
@@ -0,0 +1,288 @@
+/*
+ * Copyright (C) 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include <dt-bindings/clock/bcm-ns2.h>
+#include "clk-iproc.h"
+
+#define REG_VAL(o, s, w) { .offset = o, .shift = s, .width = w, }
+
+#define AON_VAL(o, pw, ps, is) { .offset = o, .pwr_width = pw, \
+ .pwr_shift = ps, .iso_shift = is }
+
+#define RESET_VAL(o, rs, prs) { .offset = o, .reset_shift = rs, \
+ .p_reset_shift = prs }
+
+#define DF_VAL(o, kis, kiw, kps, kpw, kas, kaw) { .offset = o, .ki_shift = kis,\
+ .ki_width = kiw, .kp_shift = kps, .kp_width = kpw, .ka_shift = kas, \
+ .ka_width = kaw }
+
+#define VCO_CTRL_VAL(uo, lo) { .u_offset = uo, .l_offset = lo }
+
+#define ENABLE_VAL(o, es, hs, bs) { .offset = o, .enable_shift = es, \
+ .hold_shift = hs, .bypass_shift = bs }
+
+static const struct iproc_pll_ctrl genpll_scr = {
+ .flags = IPROC_CLK_AON | IPROC_CLK_PLL_SPLIT_STAT_CTRL,
+ .aon = AON_VAL(0x0, 1, 15, 12),
+ .reset = RESET_VAL(0x4, 2, 1),
+ .dig_filter = DF_VAL(0x0, 9, 3, 5, 4, 2, 3),
+ .ndiv_int = REG_VAL(0x8, 4, 10),
+ .pdiv = REG_VAL(0x8, 0, 4),
+ .vco_ctrl = VCO_CTRL_VAL(0x10, 0xc),
+ .status = REG_VAL(0x0, 27, 1),
+};
+
+
+static const struct iproc_clk_ctrl genpll_scr_clk[] = {
+ /* bypass_shift, the last value passed into ENABLE_VAL(), is not defined
+ * in NS2. However, it doesn't appear to be used anywhere, so setting
+ * it to 0.
+ */
+ [BCM_NS2_GENPLL_SCR_SCR_CLK] = {
+ .channel = BCM_NS2_GENPLL_SCR_SCR_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x0, 18, 12, 0),
+ .mdiv = REG_VAL(0x18, 0, 8),
+ },
+ [BCM_NS2_GENPLL_SCR_FS_CLK] = {
+ .channel = BCM_NS2_GENPLL_SCR_FS_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x0, 19, 13, 0),
+ .mdiv = REG_VAL(0x18, 8, 8),
+ },
+ [BCM_NS2_GENPLL_SCR_AUDIO_CLK] = {
+ .channel = BCM_NS2_GENPLL_SCR_AUDIO_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x0, 20, 14, 0),
+ .mdiv = REG_VAL(0x14, 0, 8),
+ },
+ [BCM_NS2_GENPLL_SCR_CH3_UNUSED] = {
+ .channel = BCM_NS2_GENPLL_SCR_CH3_UNUSED,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x0, 21, 15, 0),
+ .mdiv = REG_VAL(0x14, 8, 8),
+ },
+ [BCM_NS2_GENPLL_SCR_CH4_UNUSED] = {
+ .channel = BCM_NS2_GENPLL_SCR_CH4_UNUSED,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x0, 22, 16, 0),
+ .mdiv = REG_VAL(0x14, 16, 8),
+ },
+ [BCM_NS2_GENPLL_SCR_CH5_UNUSED] = {
+ .channel = BCM_NS2_GENPLL_SCR_CH5_UNUSED,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x0, 23, 17, 0),
+ .mdiv = REG_VAL(0x14, 24, 8),
+ },
+};
+
+static void __init ns2_genpll_scr_clk_init(struct device_node *node)
+{
+ iproc_pll_clk_setup(node, &genpll_scr, NULL, 0, genpll_scr_clk,
+ ARRAY_SIZE(genpll_scr_clk));
+}
+CLK_OF_DECLARE(ns2_genpll_src_clk, "brcm,ns2-genpll-scr",
+ ns2_genpll_scr_clk_init);
+
+static const struct iproc_pll_ctrl genpll_sw = {
+ .flags = IPROC_CLK_AON | IPROC_CLK_PLL_SPLIT_STAT_CTRL,
+ .aon = AON_VAL(0x0, 2, 9, 8),
+ .reset = RESET_VAL(0x4, 2, 1),
+ .dig_filter = DF_VAL(0x0, 9, 3, 5, 4, 2, 3),
+ .ndiv_int = REG_VAL(0x8, 4, 10),
+ .pdiv = REG_VAL(0x8, 0, 4),
+ .vco_ctrl = VCO_CTRL_VAL(0x10, 0xc),
+ .status = REG_VAL(0x0, 13, 1),
+};
+
+static const struct iproc_clk_ctrl genpll_sw_clk[] = {
+ /* bypass_shift, the last value passed into ENABLE_VAL(), is not defined
+ * in NS2. However, it doesn't appear to be used anywhere, so setting
+ * it to 0.
+ */
+ [BCM_NS2_GENPLL_SW_RPE_CLK] = {
+ .channel = BCM_NS2_GENPLL_SW_RPE_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x0, 18, 12, 0),
+ .mdiv = REG_VAL(0x18, 0, 8),
+ },
+ [BCM_NS2_GENPLL_SW_250_CLK] = {
+ .channel = BCM_NS2_GENPLL_SW_250_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x0, 19, 13, 0),
+ .mdiv = REG_VAL(0x18, 8, 8),
+ },
+ [BCM_NS2_GENPLL_SW_NIC_CLK] = {
+ .channel = BCM_NS2_GENPLL_SW_NIC_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x0, 20, 14, 0),
+ .mdiv = REG_VAL(0x14, 0, 8),
+ },
+ [BCM_NS2_GENPLL_SW_CHIMP_CLK] = {
+ .channel = BCM_NS2_GENPLL_SW_CHIMP_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x0, 21, 15, 0),
+ .mdiv = REG_VAL(0x14, 8, 8),
+ },
+ [BCM_NS2_GENPLL_SW_PORT_CLK] = {
+ .channel = BCM_NS2_GENPLL_SW_PORT_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x0, 22, 16, 0),
+ .mdiv = REG_VAL(0x14, 16, 8),
+ },
+ [BCM_NS2_GENPLL_SW_SDIO_CLK] = {
+ .channel = BCM_NS2_GENPLL_SW_SDIO_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x0, 23, 17, 0),
+ .mdiv = REG_VAL(0x14, 24, 8),
+ },
+};
+
+static void __init ns2_genpll_sw_clk_init(struct device_node *node)
+{
+ iproc_pll_clk_setup(node, &genpll_sw, NULL, 0, genpll_sw_clk,
+ ARRAY_SIZE(genpll_sw_clk));
+}
+CLK_OF_DECLARE(ns2_genpll_sw_clk, "brcm,ns2-genpll-sw",
+ ns2_genpll_sw_clk_init);
+
+static const struct iproc_pll_ctrl lcpll_ddr = {
+ .flags = IPROC_CLK_AON | IPROC_CLK_PLL_SPLIT_STAT_CTRL,
+ .aon = AON_VAL(0x0, 2, 1, 0),
+ .reset = RESET_VAL(0x4, 2, 1),
+ .dig_filter = DF_VAL(0x0, 9, 3, 5, 4, 1, 4),
+ .ndiv_int = REG_VAL(0x8, 4, 10),
+ .pdiv = REG_VAL(0x8, 0, 4),
+ .vco_ctrl = VCO_CTRL_VAL(0x10, 0xc),
+ .status = REG_VAL(0x0, 0, 1),
+};
+
+static const struct iproc_clk_ctrl lcpll_ddr_clk[] = {
+ /* bypass_shift, the last value passed into ENABLE_VAL(), is not defined
+ * in NS2. However, it doesn't appear to be used anywhere, so setting
+ * it to 0.
+ */
+ [BCM_NS2_LCPLL_DDR_PCIE_SATA_USB_CLK] = {
+ .channel = BCM_NS2_LCPLL_DDR_PCIE_SATA_USB_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x0, 18, 12, 0),
+ .mdiv = REG_VAL(0x14, 0, 8),
+ },
+ [BCM_NS2_LCPLL_DDR_DDR_CLK] = {
+ .channel = BCM_NS2_LCPLL_DDR_DDR_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x0, 19, 13, 0),
+ .mdiv = REG_VAL(0x14, 8, 8),
+ },
+ [BCM_NS2_LCPLL_DDR_CH2_UNUSED] = {
+ .channel = BCM_NS2_LCPLL_DDR_CH2_UNUSED,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x0, 20, 14, 0),
+ .mdiv = REG_VAL(0x10, 0, 8),
+ },
+ [BCM_NS2_LCPLL_DDR_CH3_UNUSED] = {
+ .channel = BCM_NS2_LCPLL_DDR_CH3_UNUSED,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x0, 21, 15, 0),
+ .mdiv = REG_VAL(0x10, 8, 8),
+ },
+ [BCM_NS2_LCPLL_DDR_CH4_UNUSED] = {
+ .channel = BCM_NS2_LCPLL_DDR_CH4_UNUSED,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x0, 22, 16, 0),
+ .mdiv = REG_VAL(0x10, 16, 8),
+ },
+ [BCM_NS2_LCPLL_DDR_CH5_UNUSED] = {
+ .channel = BCM_NS2_LCPLL_DDR_CH5_UNUSED,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x0, 23, 17, 0),
+ .mdiv = REG_VAL(0x10, 24, 8),
+ },
+};
+
+static void __init ns2_lcpll_ddr_clk_init(struct device_node *node)
+{
+ iproc_pll_clk_setup(node, &lcpll_ddr, NULL, 0, lcpll_ddr_clk,
+ ARRAY_SIZE(lcpll_ddr_clk));
+}
+CLK_OF_DECLARE(ns2_lcpll_ddr_clk, "brcm,ns2-lcpll-ddr",
+ ns2_lcpll_ddr_clk_init);
+
+static const struct iproc_pll_ctrl lcpll_ports = {
+ .flags = IPROC_CLK_AON | IPROC_CLK_PLL_SPLIT_STAT_CTRL,
+ .aon = AON_VAL(0x0, 2, 5, 4),
+ .reset = RESET_VAL(0x4, 2, 1),
+ .dig_filter = DF_VAL(0x0, 9, 3, 5, 4, 1, 4),
+ .ndiv_int = REG_VAL(0x8, 4, 10),
+ .pdiv = REG_VAL(0x8, 0, 4),
+ .vco_ctrl = VCO_CTRL_VAL(0x10, 0xc),
+ .status = REG_VAL(0x0, 0, 1),
+};
+
+static const struct iproc_clk_ctrl lcpll_ports_clk[] = {
+ /* bypass_shift, the last value passed into ENABLE_VAL(), is not defined
+ * in NS2. However, it doesn't appear to be used anywhere, so setting
+ * it to 0.
+ */
+ [BCM_NS2_LCPLL_PORTS_WAN_CLK] = {
+ .channel = BCM_NS2_LCPLL_PORTS_WAN_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x0, 18, 12, 0),
+ .mdiv = REG_VAL(0x14, 0, 8),
+ },
+ [BCM_NS2_LCPLL_PORTS_RGMII_CLK] = {
+ .channel = BCM_NS2_LCPLL_PORTS_RGMII_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x0, 19, 13, 0),
+ .mdiv = REG_VAL(0x14, 8, 8),
+ },
+ [BCM_NS2_LCPLL_PORTS_CH2_UNUSED] = {
+ .channel = BCM_NS2_LCPLL_PORTS_CH2_UNUSED,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x0, 20, 14, 0),
+ .mdiv = REG_VAL(0x10, 0, 8),
+ },
+ [BCM_NS2_LCPLL_PORTS_CH3_UNUSED] = {
+ .channel = BCM_NS2_LCPLL_PORTS_CH3_UNUSED,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x0, 21, 15, 0),
+ .mdiv = REG_VAL(0x10, 8, 8),
+ },
+ [BCM_NS2_LCPLL_PORTS_CH4_UNUSED] = {
+ .channel = BCM_NS2_LCPLL_PORTS_CH4_UNUSED,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x0, 22, 16, 0),
+ .mdiv = REG_VAL(0x10, 16, 8),
+ },
+ [BCM_NS2_LCPLL_PORTS_CH5_UNUSED] = {
+ .channel = BCM_NS2_LCPLL_PORTS_CH5_UNUSED,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x0, 23, 17, 0),
+ .mdiv = REG_VAL(0x10, 24, 8),
+ },
+};
+
+static void __init ns2_lcpll_ports_clk_init(struct device_node *node)
+{
+ iproc_pll_clk_setup(node, &lcpll_ports, NULL, 0, lcpll_ports_clk,
+ ARRAY_SIZE(lcpll_ports_clk));
+}
+CLK_OF_DECLARE(ns2_lcpll_ports_clk, "brcm,ns2-lcpll-ports",
+ ns2_lcpll_ports_clk_init);