Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

6 files changed, 2719 insertions, 0 deletions

diff --git a/kernel/drivers/char/xillybus/Kconfig b/kernel/drivers/char/xillybus/Kconfig
new file mode 100644
index 000000000..b53bdf12d
--- /dev/null
+++ b/kernel/drivers/char/xillybus/Kconfig
@@ -0,0 +1,33 @@
+#
+# Xillybus devices
+#
+
+config XILLYBUS
+	tristate "Xillybus generic FPGA interface"
+	depends on PCI || (OF_ADDRESS && OF_IRQ)
+	select CRC32
+	help
+	  Xillybus is a generic interface for peripherals designed on
+	  programmable logic (FPGA). The driver probes the hardware for
+	  its capabilities, and creates device files accordingly.
+
+	  If unsure, say N.
+
+if XILLYBUS
+
+config XILLYBUS_PCIE
+	tristate "Xillybus over PCIe"
+	depends on PCI_MSI
+	help
+	  Set to M if you want Xillybus to use PCI Express for communicating
+	  with the FPGA.
+
+config XILLYBUS_OF
+	tristate "Xillybus over Device Tree"
+	depends on OF_ADDRESS && OF_IRQ
+	help
+	  Set to M if you want Xillybus to find its resources from the
+	  Open Firmware Flattened Device Tree. If the target is an embedded
+	  system, say M.
+
+endif # if XILLYBUS
diff --git a/kernel/drivers/char/xillybus/Makefile b/kernel/drivers/char/xillybus/Makefile
new file mode 100644
index 000000000..b68b7ebfd
--- /dev/null
+++ b/kernel/drivers/char/xillybus/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for Xillybus driver
+#
+
+obj-$(CONFIG_XILLYBUS)		+= xillybus_core.o
+obj-$(CONFIG_XILLYBUS_PCIE)	+= xillybus_pcie.o
+obj-$(CONFIG_XILLYBUS_OF)	+= xillybus_of.o
diff --git a/kernel/drivers/char/xillybus/xillybus.h b/kernel/drivers/char/xillybus/xillybus.h
new file mode 100644
index 000000000..b9a9eb6d4
--- /dev/null
+++ b/kernel/drivers/char/xillybus/xillybus.h
@@ -0,0 +1,160 @@
+/*
+ * linux/drivers/misc/xillybus.h
+ *
+ * Copyright 2011 Xillybus Ltd, http://xillybus.com
+ *
+ * Header file for the Xillybus FPGA/host framework.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the smems of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ */
+
+#ifndef __XILLYBUS_H
+#define __XILLYBUS_H
+
+#include <linux/list.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/cdev.h>
+#include <linux/spinlock.h>
+#include <linux/mutex.h>
+#include <linux/workqueue.h>
+
+struct xilly_endpoint_hardware;
+
+struct xilly_buffer {
+	void *addr;
+	dma_addr_t dma_addr;
+	int end_offset; /* Counting elements, not bytes */
+};
+
+struct xilly_idt_handle {
+	unsigned char *chandesc;
+	unsigned char *idt;
+	int entries;
+};
+
+/*
+ * Read-write confusion: wr_* and rd_* notation sticks to FPGA view, so
+ * wr_* buffers are those consumed by read(), since the FPGA writes to them
+ * and vice versa.
+ */
+
+struct xilly_channel {
+	struct xilly_endpoint *endpoint;
+	int chan_num;
+	int log2_element_size;
+	int seekable;
+
+	struct xilly_buffer **wr_buffers; /* FPGA writes, driver reads! */
+	int num_wr_buffers;
+	unsigned int wr_buf_size; /* In bytes */
+	int wr_fpga_buf_idx;
+	int wr_host_buf_idx;
+	int wr_host_buf_pos;
+	int wr_empty;
+	int wr_ready; /* Significant only when wr_empty == 1 */
+	int wr_sleepy;
+	int wr_eof;
+	int wr_hangup;
+	spinlock_t wr_spinlock;
+	struct mutex wr_mutex;
+	wait_queue_head_t wr_wait;
+	wait_queue_head_t wr_ready_wait;
+	int wr_ref_count;
+	int wr_synchronous;
+	int wr_allow_partial;
+	int wr_exclusive_open;
+	int wr_supports_nonempty;
+
+	struct xilly_buffer **rd_buffers; /* FPGA reads, driver writes! */
+	int num_rd_buffers;
+	unsigned int rd_buf_size; /* In bytes */
+	int rd_fpga_buf_idx;
+	int rd_host_buf_pos;
+	int rd_host_buf_idx;
+	int rd_full;
+	spinlock_t rd_spinlock;
+	struct mutex rd_mutex;
+	wait_queue_head_t rd_wait;
+	int rd_ref_count;
+	int rd_allow_partial;
+	int rd_synchronous;
+	int rd_exclusive_open;
+	struct delayed_work rd_workitem;
+	unsigned char rd_leftovers[4];
+};
+
+struct xilly_endpoint {
+	/*
+	 * One of pdev and dev is always NULL, and the other is a valid
+	 * pointer, depending on the type of device
+	 */
+	struct pci_dev *pdev;
+	struct device *dev;
+	struct xilly_endpoint_hardware *ephw;
+
+	struct list_head ep_list;
+	int dma_using_dac; /* =1 if 64-bit DMA is used, =0 otherwise. */
+	__iomem void *registers;
+	int fatal_error;
+
+	struct mutex register_mutex;
+	wait_queue_head_t ep_wait;
+
+	/* Channels and message handling */
+	struct cdev cdev;
+
+	int major;
+	int lowest_minor; /* Highest minor = lowest_minor + num_channels - 1 */
+
+	int num_channels; /* EXCLUDING message buffer */
+	struct xilly_channel **channels;
+	int msg_counter;
+	int failed_messages;
+	int idtlen;
+
+	u32 *msgbuf_addr;
+	dma_addr_t msgbuf_dma_addr;
+	unsigned int msg_buf_size;
+};
+
+struct xilly_endpoint_hardware {
+	struct module *owner;
+	void (*hw_sync_sgl_for_cpu)(struct xilly_endpoint *,
+				    dma_addr_t,
+				    size_t,
+				    int);
+	void (*hw_sync_sgl_for_device)(struct xilly_endpoint *,
+				       dma_addr_t,
+				       size_t,
+				       int);
+	int (*map_single)(struct xilly_endpoint *,
+			  void *,
+			  size_t,
+			  int,
+			  dma_addr_t *);
+};
+
+struct xilly_mapping {
+	void *device;
+	dma_addr_t dma_addr;
+	size_t size;
+	int direction;
+};
+
+irqreturn_t xillybus_isr(int irq, void *data);
+
+struct xilly_endpoint *xillybus_init_endpoint(struct pci_dev *pdev,
+					      struct device *dev,
+					      struct xilly_endpoint_hardware
+					      *ephw);
+
+int xillybus_endpoint_discovery(struct xilly_endpoint *endpoint);
+
+void xillybus_endpoint_remove(struct xilly_endpoint *endpoint);
+
+#endif /* __XILLYBUS_H */
diff --git a/kernel/drivers/char/xillybus/xillybus_core.c b/kernel/drivers/char/xillybus/xillybus_core.c
new file mode 100644
index 000000000..77d6c127e
--- /dev/null
+++ b/kernel/drivers/char/xillybus/xillybus_core.c
@@ -0,0 +1,2105 @@
+/*
+ * linux/drivers/misc/xillybus_core.c
+ *
+ * Copyright 2011 Xillybus Ltd, http://xillybus.com
+ *
+ * Driver for the Xillybus FPGA/host framework.
+ *
+ * This driver interfaces with a special IP core in an FPGA, setting up
+ * a pipe between a hardware FIFO in the programmable logic and a device
+ * file in the host. The number of such pipes and their attributes are
+ * set up on the logic. This driver detects these automatically and
+ * creates the device files accordingly.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the smems of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ */
+
+#include <linux/list.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/fs.h>
+#include <linux/cdev.h>
+#include <linux/spinlock.h>
+#include <linux/mutex.h>
+#include <linux/crc32.h>
+#include <linux/poll.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+#include "xillybus.h"
+
+MODULE_DESCRIPTION("Xillybus core functions");
+MODULE_AUTHOR("Eli Billauer, Xillybus Ltd.");
+MODULE_VERSION("1.07");
+MODULE_ALIAS("xillybus_core");
+MODULE_LICENSE("GPL v2");
+
+/* General timeout is 100 ms, rx timeout is 10 ms */
+#define XILLY_RX_TIMEOUT (10*HZ/1000)
+#define XILLY_TIMEOUT (100*HZ/1000)
+
+#define fpga_msg_ctrl_reg              0x0008
+#define fpga_dma_control_reg           0x0020
+#define fpga_dma_bufno_reg             0x0024
+#define fpga_dma_bufaddr_lowaddr_reg   0x0028
+#define fpga_dma_bufaddr_highaddr_reg  0x002c
+#define fpga_buf_ctrl_reg              0x0030
+#define fpga_buf_offset_reg            0x0034
+#define fpga_endian_reg                0x0040
+
+#define XILLYMSG_OPCODE_RELEASEBUF 1
+#define XILLYMSG_OPCODE_QUIESCEACK 2
+#define XILLYMSG_OPCODE_FIFOEOF 3
+#define XILLYMSG_OPCODE_FATAL_ERROR 4
+#define XILLYMSG_OPCODE_NONEMPTY 5
+
+static const char xillyname[] = "xillybus";
+
+static struct class *xillybus_class;
+
+/*
+ * ep_list_lock is the last lock to be taken; No other lock requests are
+ * allowed while holding it. It merely protects list_of_endpoints, and not
+ * the endpoints listed in it.
+ */
+
+static LIST_HEAD(list_of_endpoints);
+static struct mutex ep_list_lock;
+static struct workqueue_struct *xillybus_wq;
+
+/*
+ * Locking scheme: Mutexes protect invocations of character device methods.
+ * If both locks are taken, wr_mutex is taken first, rd_mutex second.
+ *
+ * wr_spinlock protects wr_*_buf_idx, wr_empty, wr_sleepy, wr_ready and the
+ * buffers' end_offset fields against changes made by IRQ handler (and in
+ * theory, other file request handlers, but the mutex handles that). Nothing
+ * else.
+ * They are held for short direct memory manipulations. Needless to say,
+ * no mutex locking is allowed when a spinlock is held.
+ *
+ * rd_spinlock does the same with rd_*_buf_idx, rd_empty and end_offset.
+ *
+ * register_mutex is endpoint-specific, and is held when non-atomic
+ * register operations are performed. wr_mutex and rd_mutex may be
+ * held when register_mutex is taken, but none of the spinlocks. Note that
+ * register_mutex doesn't protect against sporadic buf_ctrl_reg writes
+ * which are unrelated to buf_offset_reg, since they are harmless.
+ *
+ * Blocking on the wait queues is allowed with mutexes held, but not with
+ * spinlocks.
+ *
+ * Only interruptible blocking is allowed on mutexes and wait queues.
+ *
+ * All in all, the locking order goes (with skips allowed, of course):
+ * wr_mutex -> rd_mutex -> register_mutex -> wr_spinlock -> rd_spinlock
+ */
+
+static void malformed_message(struct xilly_endpoint *endpoint, u32 *buf)
+{
+	int opcode;
+	int msg_channel, msg_bufno, msg_data, msg_dir;
+
+	opcode = (buf[0] >> 24) & 0xff;
+	msg_dir = buf[0] & 1;
+	msg_channel = (buf[0] >> 1) & 0x7ff;
+	msg_bufno = (buf[0] >> 12) & 0x3ff;
+	msg_data = buf[1] & 0xfffffff;
+
+	dev_warn(endpoint->dev,
+		 "Malformed message (skipping): opcode=%d, channel=%03x, dir=%d, bufno=%03x, data=%07x\n",
+		 opcode, msg_channel, msg_dir, msg_bufno, msg_data);
+}
+
+/*
+ * xillybus_isr assumes the interrupt is allocated exclusively to it,
+ * which is the natural case MSI and several other hardware-oriented
+ * interrupts. Sharing is not allowed.
+ */
+
+irqreturn_t xillybus_isr(int irq, void *data)
+{
+	struct xilly_endpoint *ep = data;
+	u32 *buf;
+	unsigned int buf_size;
+	int i;
+	int opcode;
+	unsigned int msg_channel, msg_bufno, msg_data, msg_dir;
+	struct xilly_channel *channel;
+
+	buf = ep->msgbuf_addr;
+	buf_size = ep->msg_buf_size/sizeof(u32);
+
+	ep->ephw->hw_sync_sgl_for_cpu(ep,
+				      ep->msgbuf_dma_addr,
+				      ep->msg_buf_size,
+				      DMA_FROM_DEVICE);
+
+	for (i = 0; i < buf_size; i += 2) {
+		if (((buf[i+1] >> 28) & 0xf) != ep->msg_counter) {
+			malformed_message(ep, &buf[i]);
+			dev_warn(ep->dev,
+				 "Sending a NACK on counter %x (instead of %x) on entry %d\n",
+				 ((buf[i+1] >> 28) & 0xf),
+				 ep->msg_counter,
+				 i/2);
+
+			if (++ep->failed_messages > 10) {
+				dev_err(ep->dev,
+					"Lost sync with interrupt messages. Stopping.\n");
+			} else {
+				ep->ephw->hw_sync_sgl_for_device(
+					ep,
+					ep->msgbuf_dma_addr,
+					ep->msg_buf_size,
+					DMA_FROM_DEVICE);
+
+				iowrite32(0x01,  /* Message NACK */
+					  ep->registers + fpga_msg_ctrl_reg);
+			}
+			return IRQ_HANDLED;
+		} else if (buf[i] & (1 << 22)) /* Last message */
+			break;
+	}
+
+	if (i >= buf_size) {
+		dev_err(ep->dev, "Bad interrupt message. Stopping.\n");
+		return IRQ_HANDLED;
+	}
+
+	buf_size = i + 2;
+
+	for (i = 0; i < buf_size; i += 2) { /* Scan through messages */
+		opcode = (buf[i] >> 24) & 0xff;
+
+		msg_dir = buf[i] & 1;
+		msg_channel = (buf[i] >> 1) & 0x7ff;
+		msg_bufno = (buf[i] >> 12) & 0x3ff;
+		msg_data = buf[i+1] & 0xfffffff;
+
+		switch (opcode) {
+		case XILLYMSG_OPCODE_RELEASEBUF:
+			if ((msg_channel > ep->num_channels) ||
+			    (msg_channel == 0)) {
+				malformed_message(ep, &buf[i]);
+				break;
+			}
+
+			channel = ep->channels[msg_channel];
+
+			if (msg_dir) { /* Write channel */
+				if (msg_bufno >= channel->num_wr_buffers) {
+					malformed_message(ep, &buf[i]);
+					break;
+				}
+				spin_lock(&channel->wr_spinlock);
+				channel->wr_buffers[msg_bufno]->end_offset =
+					msg_data;
+				channel->wr_fpga_buf_idx = msg_bufno;
+				channel->wr_empty = 0;
+				channel->wr_sleepy = 0;
+				spin_unlock(&channel->wr_spinlock);
+
+				wake_up_interruptible(&channel->wr_wait);
+
+			} else {
+				/* Read channel */
+
+				if (msg_bufno >= channel->num_rd_buffers) {
+					malformed_message(ep, &buf[i]);
+					break;
+				}
+
+				spin_lock(&channel->rd_spinlock);
+				channel->rd_fpga_buf_idx = msg_bufno;
+				channel->rd_full = 0;
+				spin_unlock(&channel->rd_spinlock);
+
+				wake_up_interruptible(&channel->rd_wait);
+				if (!channel->rd_synchronous)
+					queue_delayed_work(
+						xillybus_wq,
+						&channel->rd_workitem,
+						XILLY_RX_TIMEOUT);
+			}
+
+			break;
+		case XILLYMSG_OPCODE_NONEMPTY:
+			if ((msg_channel > ep->num_channels) ||
+			    (msg_channel == 0) || (!msg_dir) ||
+			    !ep->channels[msg_channel]->wr_supports_nonempty) {
+				malformed_message(ep, &buf[i]);
+				break;
+			}
+
+			channel = ep->channels[msg_channel];
+
+			if (msg_bufno >= channel->num_wr_buffers) {
+				malformed_message(ep, &buf[i]);
+				break;
+			}
+			spin_lock(&channel->wr_spinlock);
+			if (msg_bufno == channel->wr_host_buf_idx)
+				channel->wr_ready = 1;
+			spin_unlock(&channel->wr_spinlock);
+
+			wake_up_interruptible(&channel->wr_ready_wait);
+
+			break;
+		case XILLYMSG_OPCODE_QUIESCEACK:
+			ep->idtlen = msg_data;
+			wake_up_interruptible(&ep->ep_wait);
+
+			break;
+		case XILLYMSG_OPCODE_FIFOEOF:
+			if ((msg_channel > ep->num_channels) ||
+			    (msg_channel == 0) || (!msg_dir) ||
+			    !ep->channels[msg_channel]->num_wr_buffers) {
+				malformed_message(ep, &buf[i]);
+				break;
+			}
+			channel = ep->channels[msg_channel];
+			spin_lock(&channel->wr_spinlock);
+			channel->wr_eof = msg_bufno;
+			channel->wr_sleepy = 0;
+
+			channel->wr_hangup = channel->wr_empty &&
+				(channel->wr_host_buf_idx == msg_bufno);
+
+			spin_unlock(&channel->wr_spinlock);
+
+			wake_up_interruptible(&channel->wr_wait);
+
+			break;
+		case XILLYMSG_OPCODE_FATAL_ERROR:
+			ep->fatal_error = 1;
+			wake_up_interruptible(&ep->ep_wait); /* For select() */
+			dev_err(ep->dev,
+				"FPGA reported a fatal error. This means that the low-level communication with the device has failed. This hardware problem is most likely unrelated to Xillybus (neither kernel module nor FPGA core), but reports are still welcome. All I/O is aborted.\n");
+			break;
+		default:
+			malformed_message(ep, &buf[i]);
+			break;
+		}
+	}
+
+	ep->ephw->hw_sync_sgl_for_device(ep,
+					 ep->msgbuf_dma_addr,
+					 ep->msg_buf_size,
+					 DMA_FROM_DEVICE);
+
+	ep->msg_counter = (ep->msg_counter + 1) & 0xf;
+	ep->failed_messages = 0;
+	iowrite32(0x03, ep->registers + fpga_msg_ctrl_reg); /* Message ACK */
+
+	return IRQ_HANDLED;
+}
+EXPORT_SYMBOL(xillybus_isr);
+
+/*
+ * A few trivial memory management functions.
+ * NOTE: These functions are used only on probe and remove, and therefore
+ * no locks are applied!
+ */
+
+static void xillybus_autoflush(struct work_struct *work);
+
+struct xilly_alloc_state {
+	void *salami;
+	int left_of_salami;
+	int nbuffer;
+	enum dma_data_direction direction;
+	u32 regdirection;
+};
+
+static int xilly_get_dma_buffers(struct xilly_endpoint *ep,
+				 struct xilly_alloc_state *s,
+				 struct xilly_buffer **buffers,
+				 int bufnum, int bytebufsize)
+{
+	int i, rc;
+	dma_addr_t dma_addr;
+	struct device *dev = ep->dev;
+	struct xilly_buffer *this_buffer = NULL; /* Init to silence warning */
+
+	if (buffers) { /* Not the message buffer */
+		this_buffer = devm_kcalloc(dev, bufnum,
+					   sizeof(struct xilly_buffer),
+					   GFP_KERNEL);
+		if (!this_buffer)
+			return -ENOMEM;
+	}
+
+	for (i = 0; i < bufnum; i++) {
+		/*
+		 * Buffers are expected in descending size order, so there
+		 * is either enough space for this buffer or none at all.
+		 */
+
+		if ((s->left_of_salami < bytebufsize) &&
+		    (s->left_of_salami > 0)) {
+			dev_err(ep->dev,
+				"Corrupt buffer allocation in IDT. Aborting.\n");
+			return -ENODEV;
+		}
+
+		if (s->left_of_salami == 0) {
+			int allocorder, allocsize;
+
+			allocsize = PAGE_SIZE;
+			allocorder = 0;
+			while (bytebufsize > allocsize) {
+				allocsize *= 2;
+				allocorder++;
+			}
+
+			s->salami = (void *) devm_get_free_pages(
+				dev,
+				GFP_KERNEL | __GFP_DMA32 | __GFP_ZERO,
+				allocorder);
+			if (!s->salami)
+				return -ENOMEM;
+
+			s->left_of_salami = allocsize;
+		}
+
+		rc = ep->ephw->map_single(ep, s->salami,
+					  bytebufsize, s->direction,
+					  &dma_addr);
+		if (rc)
+			return rc;
+
+		iowrite32((u32) (dma_addr & 0xffffffff),
+			  ep->registers + fpga_dma_bufaddr_lowaddr_reg);
+		iowrite32(((u32) ((((u64) dma_addr) >> 32) & 0xffffffff)),
+			  ep->registers + fpga_dma_bufaddr_highaddr_reg);
+
+		if (buffers) { /* Not the message buffer */
+			this_buffer->addr = s->salami;
+			this_buffer->dma_addr = dma_addr;
+			buffers[i] = this_buffer++;
+
+			iowrite32(s->regdirection | s->nbuffer++,
+				  ep->registers + fpga_dma_bufno_reg);
+		} else {
+			ep->msgbuf_addr = s->salami;
+			ep->msgbuf_dma_addr = dma_addr;
+			ep->msg_buf_size = bytebufsize;
+
+			iowrite32(s->regdirection,
+				  ep->registers + fpga_dma_bufno_reg);
+		}
+
+		s->left_of_salami -= bytebufsize;
+		s->salami += bytebufsize;
+	}
+	return 0;
+}
+
+static int xilly_setupchannels(struct xilly_endpoint *ep,
+			       unsigned char *chandesc,
+			       int entries)
+{
+	struct device *dev = ep->dev;
+	int i, entry, rc;
+	struct xilly_channel *channel;
+	int channelnum, bufnum, bufsize, format, is_writebuf;
+	int bytebufsize;
+	int synchronous, allowpartial, exclusive_open, seekable;
+	int supports_nonempty;
+	int msg_buf_done = 0;
+
+	struct xilly_alloc_state rd_alloc = {
+		.salami = NULL,
+		.left_of_salami = 0,
+		.nbuffer = 1,
+		.direction = DMA_TO_DEVICE,
+		.regdirection = 0,
+	};
+
+	struct xilly_alloc_state wr_alloc = {
+		.salami = NULL,
+		.left_of_salami = 0,
+		.nbuffer = 1,
+		.direction = DMA_FROM_DEVICE,
+		.regdirection = 0x80000000,
+	};
+
+	channel = devm_kcalloc(dev, ep->num_channels,
+			       sizeof(struct xilly_channel), GFP_KERNEL);
+	if (!channel)
+		return -ENOMEM;
+
+	ep->channels = devm_kcalloc(dev, ep->num_channels + 1,
+				    sizeof(struct xilly_channel *),
+				    GFP_KERNEL);
+	if (!ep->channels)
+		return -ENOMEM;
+
+	ep->channels[0] = NULL; /* Channel 0 is message buf. */
+
+	/* Initialize all channels with defaults */
+
+	for (i = 1; i <= ep->num_channels; i++) {
+		channel->wr_buffers = NULL;
+		channel->rd_buffers = NULL;
+		channel->num_wr_buffers = 0;
+		channel->num_rd_buffers = 0;
+		channel->wr_fpga_buf_idx = -1;
+		channel->wr_host_buf_idx = 0;
+		channel->wr_host_buf_pos = 0;
+		channel->wr_empty = 1;
+		channel->wr_ready = 0;
+		channel->wr_sleepy = 1;
+		channel->rd_fpga_buf_idx = 0;
+		channel->rd_host_buf_idx = 0;
+		channel->rd_host_buf_pos = 0;
+		channel->rd_full = 0;
+		channel->wr_ref_count = 0;
+		channel->rd_ref_count = 0;
+
+		spin_lock_init(&channel->wr_spinlock);
+		spin_lock_init(&channel->rd_spinlock);
+		mutex_init(&channel->wr_mutex);
+		mutex_init(&channel->rd_mutex);
+		init_waitqueue_head(&channel->rd_wait);
+		init_waitqueue_head(&channel->wr_wait);
+		init_waitqueue_head(&channel->wr_ready_wait);
+
+		INIT_DELAYED_WORK(&channel->rd_workitem, xillybus_autoflush);
+
+		channel->endpoint = ep;
+		channel->chan_num = i;
+
+		channel->log2_element_size = 0;
+
+		ep->channels[i] = channel++;
+	}
+
+	for (entry = 0; entry < entries; entry++, chandesc += 4) {
+		struct xilly_buffer **buffers = NULL;
+
+		is_writebuf = chandesc[0] & 0x01;
+		channelnum = (chandesc[0] >> 1) | ((chandesc[1] & 0x0f) << 7);
+		format = (chandesc[1] >> 4) & 0x03;
+		allowpartial = (chandesc[1] >> 6) & 0x01;
+		synchronous = (chandesc[1] >> 7) & 0x01;
+		bufsize = 1 << (chandesc[2] & 0x1f);
+		bufnum = 1 << (chandesc[3] & 0x0f);
+		exclusive_open = (chandesc[2] >> 7) & 0x01;
+		seekable = (chandesc[2] >> 6) & 0x01;
+		supports_nonempty = (chandesc[2] >> 5) & 0x01;
+
+		if ((channelnum > ep->num_channels) ||
+		    ((channelnum == 0) && !is_writebuf)) {
+			dev_err(ep->dev,
+				"IDT requests channel out of range. Aborting.\n");
+			return -ENODEV;
+		}
+
+		channel = ep->channels[channelnum]; /* NULL for msg channel */
+
+		if (!is_writebuf || channelnum > 0) {
+			channel->log2_element_size = ((format > 2) ?
+						      2 : format);
+
+			bytebufsize = channel->rd_buf_size = bufsize *
+				(1 << channel->log2_element_size);
+
+			buffers = devm_kcalloc(dev, bufnum,
+					       sizeof(struct xilly_buffer *),
+					       GFP_KERNEL);
+			if (!buffers)
+				return -ENOMEM;
+		} else {
+			bytebufsize = bufsize << 2;
+		}
+
+		if (!is_writebuf) {
+			channel->num_rd_buffers = bufnum;
+			channel->rd_allow_partial = allowpartial;
+			channel->rd_synchronous = synchronous;
+			channel->rd_exclusive_open = exclusive_open;
+			channel->seekable = seekable;
+
+			channel->rd_buffers = buffers;
+			rc = xilly_get_dma_buffers(ep, &rd_alloc, buffers,
+						   bufnum, bytebufsize);
+		} else if (channelnum > 0) {
+			channel->num_wr_buffers = bufnum;
+
+			channel->seekable = seekable;
+			channel->wr_supports_nonempty = supports_nonempty;
+
+			channel->wr_allow_partial = allowpartial;
+			channel->wr_synchronous = synchronous;
+			channel->wr_exclusive_open = exclusive_open;
+
+			channel->wr_buffers = buffers;
+			rc = xilly_get_dma_buffers(ep, &wr_alloc, buffers,
+						   bufnum, bytebufsize);
+		} else {
+			rc = xilly_get_dma_buffers(ep, &wr_alloc, NULL,
+						   bufnum, bytebufsize);
+			msg_buf_done++;
+		}
+
+		if (rc)
+			return -ENOMEM;
+	}
+
+	if (!msg_buf_done) {
+		dev_err(ep->dev,
+			"Corrupt IDT: No message buffer. Aborting.\n");
+		return -ENODEV;
+	}
+	return 0;
+}
+
+static int xilly_scan_idt(struct xilly_endpoint *endpoint,
+			  struct xilly_idt_handle *idt_handle)
+{
+	int count = 0;
+	unsigned char *idt = endpoint->channels[1]->wr_buffers[0]->addr;
+	unsigned char *end_of_idt = idt + endpoint->idtlen - 4;
+	unsigned char *scan;
+	int len;
+
+	scan = idt;
+	idt_handle->idt = idt;
+
+	scan++; /* Skip version number */
+
+	while ((scan <= end_of_idt) && *scan) {
+		while ((scan <= end_of_idt) && *scan++)
+			/* Do nothing, just scan thru string */;
+		count++;
+	}
+
+	scan++;
+
+	if (scan > end_of_idt) {
+		dev_err(endpoint->dev,
+			"IDT device name list overflow. Aborting.\n");
+		return -ENODEV;
+	}
+	idt_handle->chandesc = scan;
+
+	len = endpoint->idtlen - (3 + ((int) (scan - idt)));
+
+	if (len & 0x03) {
+		dev_err(endpoint->dev,
+			"Corrupt IDT device name list. Aborting.\n");
+		return -ENODEV;
+	}
+
+	idt_handle->entries = len >> 2;
+	endpoint->num_channels = count;
+
+	return 0;
+}
+
+static int xilly_obtain_idt(struct xilly_endpoint *endpoint)
+{
+	struct xilly_channel *channel;
+	unsigned char *version;
+	long t;
+
+	channel = endpoint->channels[1]; /* This should be generated ad-hoc */
+
+	channel->wr_sleepy = 1;
+
+	iowrite32(1 |
+		  (3 << 24), /* Opcode 3 for channel 0 = Send IDT */
+		  endpoint->registers + fpga_buf_ctrl_reg);
+
+	t = wait_event_interruptible_timeout(channel->wr_wait,
+					     (!channel->wr_sleepy),
+					     XILLY_TIMEOUT);
+
+	if (t <= 0) {
+		dev_err(endpoint->dev, "Failed to obtain IDT. Aborting.\n");
+
+		if (endpoint->fatal_error)
+			return -EIO;
+
+		return -ENODEV;
+	}
+
+	endpoint->ephw->hw_sync_sgl_for_cpu(
+		channel->endpoint,
+		channel->wr_buffers[0]->dma_addr,
+		channel->wr_buf_size,
+		DMA_FROM_DEVICE);
+
+	if (channel->wr_buffers[0]->end_offset != endpoint->idtlen) {
+		dev_err(endpoint->dev,
+			"IDT length mismatch (%d != %d). Aborting.\n",
+			channel->wr_buffers[0]->end_offset, endpoint->idtlen);
+		return -ENODEV;
+	}
+
+	if (crc32_le(~0, channel->wr_buffers[0]->addr,
+		     endpoint->idtlen+1) != 0) {
+		dev_err(endpoint->dev, "IDT failed CRC check. Aborting.\n");
+		return -ENODEV;
+	}
+
+	version = channel->wr_buffers[0]->addr;
+
+	/* Check version number. Accept anything below 0x82 for now. */
+	if (*version > 0x82) {
+		dev_err(endpoint->dev,
+			"No support for IDT version 0x%02x. Maybe the xillybus driver needs an upgarde. Aborting.\n",
+			*version);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static ssize_t xillybus_read(struct file *filp, char __user *userbuf,
+			     size_t count, loff_t *f_pos)
+{
+	ssize_t rc;
+	unsigned long flags;
+	int bytes_done = 0;
+	int no_time_left = 0;
+	long deadline, left_to_sleep;
+	struct xilly_channel *channel = filp->private_data;
+
+	int empty, reached_eof, exhausted, ready;
+	/* Initializations are there only to silence warnings */
+
+	int howmany = 0, bufpos = 0, bufidx = 0, bufferdone = 0;
+	int waiting_bufidx;
+
+	if (channel->endpoint->fatal_error)
+		return -EIO;
+
+	deadline = jiffies + 1 + XILLY_RX_TIMEOUT;
+
+	rc = mutex_lock_interruptible(&channel->wr_mutex);
+	if (rc)
+		return rc;
+
+	while (1) { /* Note that we may drop mutex within this loop */
+		int bytes_to_do = count - bytes_done;
+
+		spin_lock_irqsave(&channel->wr_spinlock, flags);
+
+		empty = channel->wr_empty;
+		ready = !empty || channel->wr_ready;
+
+		if (!empty) {
+			bufidx = channel->wr_host_buf_idx;
+			bufpos = channel->wr_host_buf_pos;
+			howmany = ((channel->wr_buffers[bufidx]->end_offset
+				    + 1) << channel->log2_element_size)
+				- bufpos;
+
+			/* Update wr_host_* to its post-operation state */
+			if (howmany > bytes_to_do) {
+				bufferdone = 0;
+
+				howmany = bytes_to_do;
+				channel->wr_host_buf_pos += howmany;
+			} else {
+				bufferdone = 1;
+
+				channel->wr_host_buf_pos = 0;
+
+				if (bufidx == channel->wr_fpga_buf_idx) {
+					channel->wr_empty = 1;
+					channel->wr_sleepy = 1;
+					channel->wr_ready = 0;
+				}
+
+				if (bufidx >= (channel->num_wr_buffers - 1))
+					channel->wr_host_buf_idx = 0;
+				else
+					channel->wr_host_buf_idx++;
+			}
+		}
+
+		/*
+		 * Marking our situation after the possible changes above,
+		 * for use after releasing the spinlock.
+		 *
+		 * empty = empty before change
+		 * exhasted = empty after possible change
+		 */
+
+		reached_eof = channel->wr_empty &&
+			(channel->wr_host_buf_idx == channel->wr_eof);
+		channel->wr_hangup = reached_eof;
+		exhausted = channel->wr_empty;
+		waiting_bufidx = channel->wr_host_buf_idx;
+
+		spin_unlock_irqrestore(&channel->wr_spinlock, flags);
+
+		if (!empty) { /* Go on, now without the spinlock */
+
+			if (bufpos == 0) /* Position zero means it's virgin */
+				channel->endpoint->ephw->hw_sync_sgl_for_cpu(
+					channel->endpoint,
+					channel->wr_buffers[bufidx]->dma_addr,
+					channel->wr_buf_size,
+					DMA_FROM_DEVICE);
+
+			if (copy_to_user(
+				    userbuf,
+				    channel->wr_buffers[bufidx]->addr
+				    + bufpos, howmany))
+				rc = -EFAULT;
+
+			userbuf += howmany;
+			bytes_done += howmany;
+
+			if (bufferdone) {
+				channel->endpoint->ephw->hw_sync_sgl_for_device(
+					channel->endpoint,
+					channel->wr_buffers[bufidx]->dma_addr,
+					channel->wr_buf_size,
+					DMA_FROM_DEVICE);
+
+				/*
+				 * Tell FPGA the buffer is done with. It's an
+				 * atomic operation to the FPGA, so what
+				 * happens with other channels doesn't matter,
+				 * and the certain channel is protected with
+				 * the channel-specific mutex.
+				 */
+
+				iowrite32(1 | (channel->chan_num << 1) |
+					  (bufidx << 12),
+					  channel->endpoint->registers +
+					  fpga_buf_ctrl_reg);
+			}
+
+			if (rc) {
+				mutex_unlock(&channel->wr_mutex);
+				return rc;
+			}
+		}
+
+		/* This includes a zero-count return = EOF */
+		if ((bytes_done >= count) || reached_eof)
+			break;
+
+		if (!exhausted)
+			continue; /* More in RAM buffer(s)? Just go on. */
+
+		if ((bytes_done > 0) &&
+		    (no_time_left ||
+		     (channel->wr_synchronous && channel->wr_allow_partial)))
+			break;
+
+		/*
+		 * Nonblocking read: The "ready" flag tells us that the FPGA
+		 * has data to send. In non-blocking mode, if it isn't on,
+		 * just return. But if there is, we jump directly to the point
+		 * where we ask for the FPGA to send all it has, and wait
+		 * until that data arrives. So in a sense, we *do* block in
+		 * nonblocking mode, but only for a very short time.
+		 */
+
+		if (!no_time_left && (filp->f_flags & O_NONBLOCK)) {
+			if (bytes_done > 0)
+				break;
+
+			if (ready)
+				goto desperate;
+
+			rc = -EAGAIN;
+			break;
+		}
+
+		if (!no_time_left || (bytes_done > 0)) {
+			/*
+			 * Note that in case of an element-misaligned read
+			 * request, offsetlimit will include the last element,
+			 * which will be partially read from.
+			 */
+			int offsetlimit = ((count - bytes_done) - 1) >>
+				channel->log2_element_size;
+			int buf_elements = channel->wr_buf_size >>
+				channel->log2_element_size;
+
+			/*
+			 * In synchronous mode, always send an offset limit.
+			 * Just don't send a value too big.
+			 */
+
+			if (channel->wr_synchronous) {
+				/* Don't request more than one buffer */
+				if (channel->wr_allow_partial &&
+				    (offsetlimit >= buf_elements))
+					offsetlimit = buf_elements - 1;
+
+				/* Don't request more than all buffers */
+				if (!channel->wr_allow_partial &&
+				    (offsetlimit >=
+				     (buf_elements * channel->num_wr_buffers)))
+					offsetlimit = buf_elements *
+						channel->num_wr_buffers - 1;
+			}
+
+			/*
+			 * In asynchronous mode, force early flush of a buffer
+			 * only if that will allow returning a full count. The
+			 * "offsetlimit < ( ... )" rather than "<=" excludes
+			 * requesting a full buffer, which would obviously
+			 * cause a buffer transmission anyhow
+			 */
+
+			if (channel->wr_synchronous ||
+			    (offsetlimit < (buf_elements - 1))) {
+				mutex_lock(&channel->endpoint->register_mutex);
+
+				iowrite32(offsetlimit,
+					  channel->endpoint->registers +
+					  fpga_buf_offset_reg);
+
+				iowrite32(1 | (channel->chan_num << 1) |
+					  (2 << 24) |  /* 2 = offset limit */
+					  (waiting_bufidx << 12),
+					  channel->endpoint->registers +
+					  fpga_buf_ctrl_reg);
+
+				mutex_unlock(&channel->endpoint->
+					     register_mutex);
+			}
+		}
+
+		/*
+		 * If partial completion is disallowed, there is no point in
+		 * timeout sleeping. Neither if no_time_left is set and
+		 * there's no data.
+		 */
+
+		if (!channel->wr_allow_partial ||
+		    (no_time_left && (bytes_done == 0))) {
+			/*
+			 * This do-loop will run more than once if another
+			 * thread reasserted wr_sleepy before we got the mutex
+			 * back, so we try again.
+			 */
+
+			do {
+				mutex_unlock(&channel->wr_mutex);
+
+				if (wait_event_interruptible(
+					    channel->wr_wait,
+					    (!channel->wr_sleepy)))
+					goto interrupted;
+
+				if (mutex_lock_interruptible(
+					    &channel->wr_mutex))
+					goto interrupted;
+			} while (channel->wr_sleepy);
+
+			continue;
+
+interrupted: /* Mutex is not held if got here */
+			if (channel->endpoint->fatal_error)
+				return -EIO;
+			if (bytes_done)
+				return bytes_done;
+			if (filp->f_flags & O_NONBLOCK)
+				return -EAGAIN; /* Don't admit snoozing */
+			return -EINTR;
+		}
+
+		left_to_sleep = deadline - ((long) jiffies);
+
+		/*
+		 * If our time is out, skip the waiting. We may miss wr_sleepy
+		 * being deasserted but hey, almost missing the train is like
+		 * missing it.
+		 */
+
+		if (left_to_sleep > 0) {
+			left_to_sleep =
+				wait_event_interruptible_timeout(
+					channel->wr_wait,
+					(!channel->wr_sleepy),
+					left_to_sleep);
+
+			if (left_to_sleep > 0) /* wr_sleepy deasserted */
+				continue;
+
+			if (left_to_sleep < 0) { /* Interrupt */
+				mutex_unlock(&channel->wr_mutex);
+				if (channel->endpoint->fatal_error)
+					return -EIO;
+				if (bytes_done)
+					return bytes_done;
+				return -EINTR;
+			}
+		}
+
+desperate:
+		no_time_left = 1; /* We're out of sleeping time. Desperate! */
+
+		if (bytes_done == 0) {
+			/*
+			 * Reaching here means that we allow partial return,
+			 * that we've run out of time, and that we have
+			 * nothing to return.
+			 * So tell the FPGA to send anything it has or gets.
+			 */
+
+			iowrite32(1 | (channel->chan_num << 1) |
+				  (3 << 24) |  /* Opcode 3, flush it all! */
+				  (waiting_bufidx << 12),
+				  channel->endpoint->registers +
+				  fpga_buf_ctrl_reg);
+		}
+
+		/*
+		 * Reaching here means that we *do* have data in the buffer,
+		 * but the "partial" flag disallows returning less than
+		 * required. And we don't have as much. So loop again,
+		 * which is likely to end up blocking indefinitely until
+		 * enough data has arrived.
+		 */
+	}
+
+	mutex_unlock(&channel->wr_mutex);
+
+	if (channel->endpoint->fatal_error)
+		return -EIO;
+
+	if (rc)
+		return rc;
+
+	return bytes_done;
+}
+
+/*
+ * The timeout argument takes values as follows:
+ *  >0 : Flush with timeout
+ * ==0 : Flush, and wait idefinitely for the flush to complete
+ *  <0 : Autoflush: Flush only if there's a single buffer occupied
+ */
+
+static int xillybus_myflush(struct xilly_channel *channel, long timeout)
+{
+	int rc;
+	unsigned long flags;
+
+	int end_offset_plus1;
+	int bufidx, bufidx_minus1;
+	int i;
+	int empty;
+	int new_rd_host_buf_pos;
+
+	if (channel->endpoint->fatal_error)
+		return -EIO;
+	rc = mutex_lock_interruptible(&channel->rd_mutex);
+	if (rc)
+		return rc;
+
+	/*
+	 * Don't flush a closed channel. This can happen when the work queued
+	 * autoflush thread fires off after the file has closed. This is not
+	 * an error, just something to dismiss.
+	 */
+
+	if (!channel->rd_ref_count)
+		goto done;
+
+	bufidx = channel->rd_host_buf_idx;
+
+	bufidx_minus1 = (bufidx == 0) ?
+		channel->num_rd_buffers - 1 :
+		bufidx - 1;
+
+	end_offset_plus1 = channel->rd_host_buf_pos >>
+		channel->log2_element_size;
+
+	new_rd_host_buf_pos = channel->rd_host_buf_pos -
+		(end_offset_plus1 << channel->log2_element_size);
+
+	/* Submit the current buffer if it's nonempty */
+	if (end_offset_plus1) {
+		unsigned char *tail = channel->rd_buffers[bufidx]->addr +
+			(end_offset_plus1 << channel->log2_element_size);
+
+		/* Copy  unflushed data, so we can put it in next buffer */
+		for (i = 0; i < new_rd_host_buf_pos; i++)
+			channel->rd_leftovers[i] = *tail++;
+
+		spin_lock_irqsave(&channel->rd_spinlock, flags);
+
+		/* Autoflush only if a single buffer is occupied */
+
+		if ((timeout < 0) &&
+		    (channel->rd_full ||
+		     (bufidx_minus1 != channel->rd_fpga_buf_idx))) {
+			spin_unlock_irqrestore(&channel->rd_spinlock, flags);
+			/*
+			 * A new work item may be queued by the ISR exactly
+			 * now, since the execution of a work item allows the
+			 * queuing of a new one while it's running.
+			 */
+			goto done;
+		}
+
+		/* The 4th element is never needed for data, so it's a flag */
+		channel->rd_leftovers[3] = (new_rd_host_buf_pos != 0);
+
+		/* Set up rd_full to reflect a certain moment's state */
+
+		if (bufidx == channel->rd_fpga_buf_idx)
+			channel->rd_full = 1;
+		spin_unlock_irqrestore(&channel->rd_spinlock, flags);
+
+		if (bufidx >= (channel->num_rd_buffers - 1))
+			channel->rd_host_buf_idx = 0;
+		else
+			channel->rd_host_buf_idx++;
+
+		channel->endpoint->ephw->hw_sync_sgl_for_device(
+			channel->endpoint,
+			channel->rd_buffers[bufidx]->dma_addr,
+			channel->rd_buf_size,
+			DMA_TO_DEVICE);
+
+		mutex_lock(&channel->endpoint->register_mutex);
+
+		iowrite32(end_offset_plus1 - 1,
+			  channel->endpoint->registers + fpga_buf_offset_reg);
+
+		iowrite32((channel->chan_num << 1) | /* Channel ID */
+			  (2 << 24) |  /* Opcode 2, submit buffer */
+			  (bufidx << 12),
+			  channel->endpoint->registers + fpga_buf_ctrl_reg);
+
+		mutex_unlock(&channel->endpoint->register_mutex);
+	} else if (bufidx == 0) {
+		bufidx = channel->num_rd_buffers - 1;
+	} else {
+		bufidx--;
+	}
+
+	channel->rd_host_buf_pos = new_rd_host_buf_pos;
+
+	if (timeout < 0)
+		goto done; /* Autoflush */
+
+	/*
+	 * bufidx is now the last buffer written to (or equal to
+	 * rd_fpga_buf_idx if buffer was never written to), and
+	 * channel->rd_host_buf_idx the one after it.
+	 *
+	 * If bufidx == channel->rd_fpga_buf_idx we're either empty or full.
+	 */
+
+	while (1) { /* Loop waiting for draining of buffers */
+		spin_lock_irqsave(&channel->rd_spinlock, flags);
+
+		if (bufidx != channel->rd_fpga_buf_idx)
+			channel->rd_full = 1; /*
+					       * Not really full,
+					       * but needs waiting.
+					       */
+
+		empty = !channel->rd_full;
+
+		spin_unlock_irqrestore(&channel->rd_spinlock, flags);
+
+		if (empty)
+			break;
+
+		/*
+		 * Indefinite sleep with mutex taken. With data waiting for
+		 * flushing user should not be surprised if open() for write
+		 * sleeps.
+		 */
+		if (timeout == 0)
+			wait_event_interruptible(channel->rd_wait,
+						 (!channel->rd_full));
+
+		else if (wait_event_interruptible_timeout(
+				 channel->rd_wait,
+				 (!channel->rd_full),
+				 timeout) == 0) {
+			dev_warn(channel->endpoint->dev,
+				 "Timed out while flushing. Output data may be lost.\n");
+
+			rc = -ETIMEDOUT;
+			break;
+		}
+
+		if (channel->rd_full) {
+			rc = -EINTR;
+			break;
+		}
+	}
+
+done:
+	mutex_unlock(&channel->rd_mutex);
+
+	if (channel->endpoint->fatal_error)
+		return -EIO;
+
+	return rc;
+}
+
+static int xillybus_flush(struct file *filp, fl_owner_t id)
+{
+	if (!(filp->f_mode & FMODE_WRITE))
+		return 0;
+
+	return xillybus_myflush(filp->private_data, HZ); /* 1 second timeout */
+}
+
+static void xillybus_autoflush(struct work_struct *work)
+{
+	struct delayed_work *workitem = container_of(
+		work, struct delayed_work, work);
+	struct xilly_channel *channel = container_of(
+		workitem, struct xilly_channel, rd_workitem);
+	int rc;
+
+	rc = xillybus_myflush(channel, -1);
+	if (rc == -EINTR)
+		dev_warn(channel->endpoint->dev,
+			 "Autoflush failed because work queue thread got a signal.\n");
+	else if (rc)
+		dev_err(channel->endpoint->dev,
+			"Autoflush failed under weird circumstances.\n");
+}
+
+static ssize_t xillybus_write(struct file *filp, const char __user *userbuf,
+			      size_t count, loff_t *f_pos)
+{
+	ssize_t rc;
+	unsigned long flags;
+	int bytes_done = 0;
+	struct xilly_channel *channel = filp->private_data;
+
+	int full, exhausted;
+	/* Initializations are there only to silence warnings */
+
+	int howmany = 0, bufpos = 0, bufidx = 0, bufferdone = 0;
+	int end_offset_plus1 = 0;
+
+	if (channel->endpoint->fatal_error)
+		return -EIO;
+
+	rc = mutex_lock_interruptible(&channel->rd_mutex);
+	if (rc)
+		return rc;
+
+	while (1) {
+		int bytes_to_do = count - bytes_done;
+
+		spin_lock_irqsave(&channel->rd_spinlock, flags);
+
+		full = channel->rd_full;
+
+		if (!full) {
+			bufidx = channel->rd_host_buf_idx;
+			bufpos = channel->rd_host_buf_pos;
+			howmany = channel->rd_buf_size - bufpos;
+
+			/*
+			 * Update rd_host_* to its state after this operation.
+			 * count=0 means committing the buffer immediately,
+			 * which is like flushing, but not necessarily block.
+			 */
+
+			if ((howmany > bytes_to_do) &&
+			    (count ||
+			     ((bufpos >> channel->log2_element_size) == 0))) {
+				bufferdone = 0;
+
+				howmany = bytes_to_do;
+				channel->rd_host_buf_pos += howmany;
+			} else {
+				bufferdone = 1;
+
+				if (count) {
+					end_offset_plus1 =
+						channel->rd_buf_size >>
+						channel->log2_element_size;
+					channel->rd_host_buf_pos = 0;
+				} else {
+					unsigned char *tail;
+					int i;
+
+					howmany = 0;
+
+					end_offset_plus1 = bufpos >>
+						channel->log2_element_size;
+
+					channel->rd_host_buf_pos -=
+						end_offset_plus1 <<
+						channel->log2_element_size;
+
+					tail = channel->
+						rd_buffers[bufidx]->addr +
+						(end_offset_plus1 <<
+						 channel->log2_element_size);
+
+					for (i = 0;
+					     i < channel->rd_host_buf_pos;
+					     i++)
+						channel->rd_leftovers[i] =
+							*tail++;
+				}
+
+				if (bufidx == channel->rd_fpga_buf_idx)
+					channel->rd_full = 1;
+
+				if (bufidx >= (channel->num_rd_buffers - 1))
+					channel->rd_host_buf_idx = 0;
+				else
+					channel->rd_host_buf_idx++;
+			}
+		}
+
+		/*
+		 * Marking our situation after the possible changes above,
+		 * for use  after releasing the spinlock.
+		 *
+		 * full = full before change
+		 * exhasted = full after possible change
+		 */
+
+		exhausted = channel->rd_full;
+
+		spin_unlock_irqrestore(&channel->rd_spinlock, flags);
+
+		if (!full) { /* Go on, now without the spinlock */
+			unsigned char *head =
+				channel->rd_buffers[bufidx]->addr;
+			int i;
+
+			if ((bufpos == 0) || /* Zero means it's virgin */
+			    (channel->rd_leftovers[3] != 0)) {
+				channel->endpoint->ephw->hw_sync_sgl_for_cpu(
+					channel->endpoint,
+					channel->rd_buffers[bufidx]->dma_addr,
+					channel->rd_buf_size,
+					DMA_TO_DEVICE);
+
+				/* Virgin, but leftovers are due */
+				for (i = 0; i < bufpos; i++)
+					*head++ = channel->rd_leftovers[i];
+
+				channel->rd_leftovers[3] = 0; /* Clear flag */
+			}
+
+			if (copy_from_user(
+				    channel->rd_buffers[bufidx]->addr + bufpos,
+				    userbuf, howmany))
+				rc = -EFAULT;
+
+			userbuf += howmany;
+			bytes_done += howmany;
+
+			if (bufferdone) {
+				channel->endpoint->ephw->hw_sync_sgl_for_device(
+					channel->endpoint,
+					channel->rd_buffers[bufidx]->dma_addr,
+					channel->rd_buf_size,
+					DMA_TO_DEVICE);
+
+				mutex_lock(&channel->endpoint->register_mutex);
+
+				iowrite32(end_offset_plus1 - 1,
+					  channel->endpoint->registers +
+					  fpga_buf_offset_reg);
+
+				iowrite32((channel->chan_num << 1) |
+					  (2 << 24) |  /* 2 = submit buffer */
+					  (bufidx << 12),
+					  channel->endpoint->registers +
+					  fpga_buf_ctrl_reg);
+
+				mutex_unlock(&channel->endpoint->
+					     register_mutex);
+
+				channel->rd_leftovers[3] =
+					(channel->rd_host_buf_pos != 0);
+			}
+
+			if (rc) {
+				mutex_unlock(&channel->rd_mutex);
+
+				if (channel->endpoint->fatal_error)
+					return -EIO;
+
+				if (!channel->rd_synchronous)
+					queue_delayed_work(
+						xillybus_wq,
+						&channel->rd_workitem,
+						XILLY_RX_TIMEOUT);
+
+				return rc;
+			}
+		}
+
+		if (bytes_done >= count)
+			break;
+
+		if (!exhausted)
+			continue; /* If there's more space, just go on */
+
+		if ((bytes_done > 0) && channel->rd_allow_partial)
+			break;
+
+		/*
+		 * Indefinite sleep with mutex taken. With data waiting for
+		 * flushing, user should not be surprised if open() for write
+		 * sleeps.
+		 */
+
+		if (filp->f_flags & O_NONBLOCK) {
+			rc = -EAGAIN;
+			break;
+		}
+
+		if (wait_event_interruptible(channel->rd_wait,
+					     (!channel->rd_full))) {
+			mutex_unlock(&channel->rd_mutex);
+
+			if (channel->endpoint->fatal_error)
+				return -EIO;
+
+			if (bytes_done)
+				return bytes_done;
+			return -EINTR;
+		}
+	}
+
+	mutex_unlock(&channel->rd_mutex);
+
+	if (!channel->rd_synchronous)
+		queue_delayed_work(xillybus_wq,
+				   &channel->rd_workitem,
+				   XILLY_RX_TIMEOUT);
+
+	if (channel->endpoint->fatal_error)
+		return -EIO;
+
+	if (rc)
+		return rc;
+
+	if ((channel->rd_synchronous) && (bytes_done > 0)) {
+		rc = xillybus_myflush(filp->private_data, 0); /* No timeout */
+
+		if (rc && (rc != -EINTR))
+			return rc;
+	}
+
+	return bytes_done;
+}
+
+static int xillybus_open(struct inode *inode, struct file *filp)
+{
+	int rc = 0;
+	unsigned long flags;
+	int minor = iminor(inode);
+	int major = imajor(inode);
+	struct xilly_endpoint *ep_iter, *endpoint = NULL;
+	struct xilly_channel *channel;
+
+	mutex_lock(&ep_list_lock);
+
+	list_for_each_entry(ep_iter, &list_of_endpoints, ep_list) {
+		if ((ep_iter->major == major) &&
+		    (minor >= ep_iter->lowest_minor) &&
+		    (minor < (ep_iter->lowest_minor +
+			      ep_iter->num_channels))) {
+			endpoint = ep_iter;
+			break;
+		}
+	}
+	mutex_unlock(&ep_list_lock);
+
+	if (!endpoint) {
+		pr_err("xillybus: open() failed to find a device for major=%d and minor=%d\n",
+		       major, minor);
+		return -ENODEV;
+	}
+
+	if (endpoint->fatal_error)
+		return -EIO;
+
+	channel = endpoint->channels[1 + minor - endpoint->lowest_minor];
+	filp->private_data = channel;
+
+	/*
+	 * It gets complicated because:
+	 * 1. We don't want to take a mutex we don't have to
+	 * 2. We don't want to open one direction if the other will fail.
+	 */
+
+	if ((filp->f_mode & FMODE_READ) && (!channel->num_wr_buffers))
+		return -ENODEV;
+
+	if ((filp->f_mode & FMODE_WRITE) && (!channel->num_rd_buffers))
+		return -ENODEV;
+
+	if ((filp->f_mode & FMODE_READ) && (filp->f_flags & O_NONBLOCK) &&
+	    (channel->wr_synchronous || !channel->wr_allow_partial ||
+	     !channel->wr_supports_nonempty)) {
+		dev_err(endpoint->dev,
+			"open() failed: O_NONBLOCK not allowed for read on this device\n");
+		return -ENODEV;
+	}
+
+	if ((filp->f_mode & FMODE_WRITE) && (filp->f_flags & O_NONBLOCK) &&
+	    (channel->rd_synchronous || !channel->rd_allow_partial)) {
+		dev_err(endpoint->dev,
+			"open() failed: O_NONBLOCK not allowed for write on this device\n");
+		return -ENODEV;
+	}
+
+	/*
+	 * Note: open() may block on getting mutexes despite O_NONBLOCK.
+	 * This shouldn't occur normally, since multiple open of the same
+	 * file descriptor is almost always prohibited anyhow
+	 * (*_exclusive_open is normally set in real-life systems).
+	 */
+
+	if (filp->f_mode & FMODE_READ) {
+		rc = mutex_lock_interruptible(&channel->wr_mutex);
+		if (rc)
+			return rc;
+	}
+
+	if (filp->f_mode & FMODE_WRITE) {
+		rc = mutex_lock_interruptible(&channel->rd_mutex);
+		if (rc)
+			goto unlock_wr;
+	}
+
+	if ((filp->f_mode & FMODE_READ) &&
+	    (channel->wr_ref_count != 0) &&
+	    (channel->wr_exclusive_open)) {
+		rc = -EBUSY;
+		goto unlock;
+	}
+
+	if ((filp->f_mode & FMODE_WRITE) &&
+	    (channel->rd_ref_count != 0) &&
+	    (channel->rd_exclusive_open)) {
+		rc = -EBUSY;
+		goto unlock;
+	}
+
+	if (filp->f_mode & FMODE_READ) {
+		if (channel->wr_ref_count == 0) { /* First open of file */
+			/* Move the host to first buffer */
+			spin_lock_irqsave(&channel->wr_spinlock, flags);
+			channel->wr_host_buf_idx = 0;
+			channel->wr_host_buf_pos = 0;
+			channel->wr_fpga_buf_idx = -1;
+			channel->wr_empty = 1;
+			channel->wr_ready = 0;
+			channel->wr_sleepy = 1;
+			channel->wr_eof = -1;
+			channel->wr_hangup = 0;
+
+			spin_unlock_irqrestore(&channel->wr_spinlock, flags);
+
+			iowrite32(1 | (channel->chan_num << 1) |
+				  (4 << 24) |  /* Opcode 4, open channel */
+				  ((channel->wr_synchronous & 1) << 23),
+				  channel->endpoint->registers +
+				  fpga_buf_ctrl_reg);
+		}
+
+		channel->wr_ref_count++;
+	}
+
+	if (filp->f_mode & FMODE_WRITE) {
+		if (channel->rd_ref_count == 0) { /* First open of file */
+			/* Move the host to first buffer */
+			spin_lock_irqsave(&channel->rd_spinlock, flags);
+			channel->rd_host_buf_idx = 0;
+			channel->rd_host_buf_pos = 0;
+			channel->rd_leftovers[3] = 0; /* No leftovers. */
+			channel->rd_fpga_buf_idx = channel->num_rd_buffers - 1;
+			channel->rd_full = 0;
+
+			spin_unlock_irqrestore(&channel->rd_spinlock, flags);
+
+			iowrite32((channel->chan_num << 1) |
+				  (4 << 24),   /* Opcode 4, open channel */
+				  channel->endpoint->registers +
+				  fpga_buf_ctrl_reg);
+		}
+
+		channel->rd_ref_count++;
+	}
+
+unlock:
+	if (filp->f_mode & FMODE_WRITE)
+		mutex_unlock(&channel->rd_mutex);
+unlock_wr:
+	if (filp->f_mode & FMODE_READ)
+		mutex_unlock(&channel->wr_mutex);
+
+	if (!rc && (!channel->seekable))
+		return nonseekable_open(inode, filp);
+
+	return rc;
+}
+
+static int xillybus_release(struct inode *inode, struct file *filp)
+{
+	unsigned long flags;
+	struct xilly_channel *channel = filp->private_data;
+
+	int buf_idx;
+	int eof;
+
+	if (channel->endpoint->fatal_error)
+		return -EIO;
+
+	if (filp->f_mode & FMODE_WRITE) {
+		mutex_lock(&channel->rd_mutex);
+
+		channel->rd_ref_count--;
+
+		if (channel->rd_ref_count == 0) {
+			/*
+			 * We rely on the kernel calling flush()
+			 * before we get here.
+			 */
+
+			iowrite32((channel->chan_num << 1) | /* Channel ID */
+				  (5 << 24),  /* Opcode 5, close channel */
+				  channel->endpoint->registers +
+				  fpga_buf_ctrl_reg);
+		}
+		mutex_unlock(&channel->rd_mutex);
+	}
+
+	if (filp->f_mode & FMODE_READ) {
+		mutex_lock(&channel->wr_mutex);
+
+		channel->wr_ref_count--;
+
+		if (channel->wr_ref_count == 0) {
+			iowrite32(1 | (channel->chan_num << 1) |
+				  (5 << 24),  /* Opcode 5, close channel */
+				  channel->endpoint->registers +
+				  fpga_buf_ctrl_reg);
+
+			/*
+			 * This is crazily cautious: We make sure that not
+			 * only that we got an EOF (be it because we closed
+			 * the channel or because of a user's EOF), but verify
+			 * that it's one beyond the last buffer arrived, so
+			 * we have no leftover buffers pending before wrapping
+			 * up (which can only happen in asynchronous channels,
+			 * BTW)
+			 */
+
+			while (1) {
+				spin_lock_irqsave(&channel->wr_spinlock,
+						  flags);
+				buf_idx = channel->wr_fpga_buf_idx;
+				eof = channel->wr_eof;
+				channel->wr_sleepy = 1;
+				spin_unlock_irqrestore(&channel->wr_spinlock,
+						       flags);
+
+				/*
+				 * Check if eof points at the buffer after
+				 * the last one the FPGA submitted. Note that
+				 * no EOF is marked by negative eof.
+				 */
+
+				buf_idx++;
+				if (buf_idx == channel->num_wr_buffers)
+					buf_idx = 0;
+
+				if (buf_idx == eof)
+					break;
+
+				/*
+				 * Steal extra 100 ms if awaken by interrupt.
+				 * This is a simple workaround for an
+				 * interrupt pending when entering, which would
+				 * otherwise result in declaring the hardware
+				 * non-responsive.
+				 */
+
+				if (wait_event_interruptible(
+					    channel->wr_wait,
+					    (!channel->wr_sleepy)))
+					msleep(100);
+
+				if (channel->wr_sleepy) {
+					mutex_unlock(&channel->wr_mutex);
+					dev_warn(channel->endpoint->dev,
+						 "Hardware failed to respond to close command, therefore left in messy state.\n");
+					return -EINTR;
+				}
+			}
+		}
+
+		mutex_unlock(&channel->wr_mutex);
+	}
+
+	return 0;
+}
+
+static loff_t xillybus_llseek(struct file *filp, loff_t offset, int whence)
+{
+	struct xilly_channel *channel = filp->private_data;
+	loff_t pos = filp->f_pos;
+	int rc = 0;
+
+	/*
+	 * Take both mutexes not allowing interrupts, since it seems like
+	 * common applications don't expect an -EINTR here. Besides, multiple
+	 * access to a single file descriptor on seekable devices is a mess
+	 * anyhow.
+	 */
+
+	if (channel->endpoint->fatal_error)
+		return -EIO;
+
+	mutex_lock(&channel->wr_mutex);
+	mutex_lock(&channel->rd_mutex);
+
+	switch (whence) {
+	case SEEK_SET:
+		pos = offset;
+		break;
+	case SEEK_CUR:
+		pos += offset;
+		break;
+	case SEEK_END:
+		pos = offset; /* Going to the end => to the beginning */
+		break;
+	default:
+		rc = -EINVAL;
+		goto end;
+	}
+
+	/* In any case, we must finish on an element boundary */
+	if (pos & ((1 << channel->log2_element_size) - 1)) {
+		rc = -EINVAL;
+		goto end;
+	}
+
+	mutex_lock(&channel->endpoint->register_mutex);
+
+	iowrite32(pos >> channel->log2_element_size,
+		  channel->endpoint->registers + fpga_buf_offset_reg);
+
+	iowrite32((channel->chan_num << 1) |
+		  (6 << 24),  /* Opcode 6, set address */
+		  channel->endpoint->registers + fpga_buf_ctrl_reg);
+
+	mutex_unlock(&channel->endpoint->register_mutex);
+
+end:
+	mutex_unlock(&channel->rd_mutex);
+	mutex_unlock(&channel->wr_mutex);
+
+	if (rc) /* Return error after releasing mutexes */
+		return rc;
+
+	filp->f_pos = pos;
+
+	/*
+	 * Since seekable devices are allowed only when the channel is
+	 * synchronous, we assume that there is no data pending in either
+	 * direction (which holds true as long as no concurrent access on the
+	 * file descriptor takes place).
+	 * The only thing we may need to throw away is leftovers from partial
+	 * write() flush.
+	 */
+
+	channel->rd_leftovers[3] = 0;
+
+	return pos;
+}
+
+static unsigned int xillybus_poll(struct file *filp, poll_table *wait)
+{
+	struct xilly_channel *channel = filp->private_data;
+	unsigned int mask = 0;
+	unsigned long flags;
+
+	poll_wait(filp, &channel->endpoint->ep_wait, wait);
+
+	/*
+	 * poll() won't play ball regarding read() channels which
+	 * aren't asynchronous and support the nonempty message. Allowing
+	 * that will create situations where data has been delivered at
+	 * the FPGA, and users expecting select() to wake up, which it may
+	 * not.
+	 */
+
+	if (!channel->wr_synchronous && channel->wr_supports_nonempty) {
+		poll_wait(filp, &channel->wr_wait, wait);
+		poll_wait(filp, &channel->wr_ready_wait, wait);
+
+		spin_lock_irqsave(&channel->wr_spinlock, flags);
+		if (!channel->wr_empty || channel->wr_ready)
+			mask |= POLLIN | POLLRDNORM;
+
+		if (channel->wr_hangup)
+			/*
+			 * Not POLLHUP, because its behavior is in the
+			 * mist, and POLLIN does what we want: Wake up
+			 * the read file descriptor so it sees EOF.
+			 */
+			mask |=  POLLIN | POLLRDNORM;
+		spin_unlock_irqrestore(&channel->wr_spinlock, flags);
+	}
+
+	/*
+	 * If partial data write is disallowed on a write() channel,
+	 * it's pointless to ever signal OK to write, because is could
+	 * block despite some space being available.
+	 */
+
+	if (channel->rd_allow_partial) {
+		poll_wait(filp, &channel->rd_wait, wait);
+
+		spin_lock_irqsave(&channel->rd_spinlock, flags);
+		if (!channel->rd_full)
+			mask |= POLLOUT | POLLWRNORM;
+		spin_unlock_irqrestore(&channel->rd_spinlock, flags);
+	}
+
+	if (channel->endpoint->fatal_error)
+		mask |= POLLERR;
+
+	return mask;
+}
+
+static const struct file_operations xillybus_fops = {
+	.owner      = THIS_MODULE,
+	.read       = xillybus_read,
+	.write      = xillybus_write,
+	.open       = xillybus_open,
+	.flush      = xillybus_flush,
+	.release    = xillybus_release,
+	.llseek     = xillybus_llseek,
+	.poll       = xillybus_poll,
+};
+
+static int xillybus_init_chrdev(struct xilly_endpoint *endpoint,
+				const unsigned char *idt)
+{
+	int rc;
+	dev_t dev;
+	int devnum, i, minor, major;
+	char devname[48];
+	struct device *device;
+
+	rc = alloc_chrdev_region(&dev, 0, /* minor start */
+				 endpoint->num_channels,
+				 xillyname);
+	if (rc) {
+		dev_warn(endpoint->dev, "Failed to obtain major/minors");
+		return rc;
+	}
+
+	endpoint->major = major = MAJOR(dev);
+	endpoint->lowest_minor = minor = MINOR(dev);
+
+	cdev_init(&endpoint->cdev, &xillybus_fops);
+	endpoint->cdev.owner = endpoint->ephw->owner;
+	rc = cdev_add(&endpoint->cdev, MKDEV(major, minor),
+		      endpoint->num_channels);
+	if (rc) {
+		dev_warn(endpoint->dev, "Failed to add cdev. Aborting.\n");
+		goto unregister_chrdev;
+	}
+
+	idt++;
+
+	for (i = minor, devnum = 0;
+	     devnum < endpoint->num_channels;
+	     devnum++, i++) {
+		snprintf(devname, sizeof(devname)-1, "xillybus_%s", idt);
+
+		devname[sizeof(devname)-1] = 0; /* Should never matter */
+
+		while (*idt++)
+			/* Skip to next */;
+
+		device = device_create(xillybus_class,
+				       NULL,
+				       MKDEV(major, i),
+				       NULL,
+				       "%s", devname);
+
+		if (IS_ERR(device)) {
+			dev_warn(endpoint->dev,
+				 "Failed to create %s device. Aborting.\n",
+				 devname);
+			rc = -ENODEV;
+			goto unroll_device_create;
+		}
+	}
+
+	dev_info(endpoint->dev, "Created %d device files.\n",
+		 endpoint->num_channels);
+	return 0; /* succeed */
+
+unroll_device_create:
+	devnum--; i--;
+	for (; devnum >= 0; devnum--, i--)
+		device_destroy(xillybus_class, MKDEV(major, i));
+
+	cdev_del(&endpoint->cdev);
+unregister_chrdev:
+	unregister_chrdev_region(MKDEV(major, minor), endpoint->num_channels);
+
+	return rc;
+}
+
+static void xillybus_cleanup_chrdev(struct xilly_endpoint *endpoint)
+{
+	int minor;
+
+	for (minor = endpoint->lowest_minor;
+	     minor < (endpoint->lowest_minor + endpoint->num_channels);
+	     minor++)
+		device_destroy(xillybus_class, MKDEV(endpoint->major, minor));
+	cdev_del(&endpoint->cdev);
+	unregister_chrdev_region(MKDEV(endpoint->major,
+				       endpoint->lowest_minor),
+				 endpoint->num_channels);
+
+	dev_info(endpoint->dev, "Removed %d device files.\n",
+		 endpoint->num_channels);
+}
+
+struct xilly_endpoint *xillybus_init_endpoint(struct pci_dev *pdev,
+					      struct device *dev,
+					      struct xilly_endpoint_hardware
+					      *ephw)
+{
+	struct xilly_endpoint *endpoint;
+
+	endpoint = devm_kzalloc(dev, sizeof(*endpoint), GFP_KERNEL);
+	if (!endpoint)
+		return NULL;
+
+	endpoint->pdev = pdev;
+	endpoint->dev = dev;
+	endpoint->ephw = ephw;
+	endpoint->msg_counter = 0x0b;
+	endpoint->failed_messages = 0;
+	endpoint->fatal_error = 0;
+
+	init_waitqueue_head(&endpoint->ep_wait);
+	mutex_init(&endpoint->register_mutex);
+
+	return endpoint;
+}
+EXPORT_SYMBOL(xillybus_init_endpoint);
+
+static int xilly_quiesce(struct xilly_endpoint *endpoint)
+{
+	long t;
+
+	endpoint->idtlen = -1;
+
+	iowrite32((u32) (endpoint->dma_using_dac & 0x0001),
+		  endpoint->registers + fpga_dma_control_reg);
+
+	t = wait_event_interruptible_timeout(endpoint->ep_wait,
+					     (endpoint->idtlen >= 0),
+					     XILLY_TIMEOUT);
+	if (t <= 0) {
+		dev_err(endpoint->dev,
+			"Failed to quiesce the device on exit.\n");
+		return -ENODEV;
+	}
+	return 0;
+}
+
+int xillybus_endpoint_discovery(struct xilly_endpoint *endpoint)
+{
+	int rc;
+	long t;
+
+	void *bootstrap_resources;
+	int idtbuffersize = (1 << PAGE_SHIFT);
+	struct device *dev = endpoint->dev;
+
+	/*
+	 * The bogus IDT is used during bootstrap for allocating the initial
+	 * message buffer, and then the message buffer and space for the IDT
+	 * itself. The initial message buffer is of a single page's size, but
+	 * it's soon replaced with a more modest one (and memory is freed).
+	 */
+
+	unsigned char bogus_idt[8] = { 1, 224, (PAGE_SHIFT)-2, 0,
+				       3, 192, PAGE_SHIFT, 0 };
+	struct xilly_idt_handle idt_handle;
+
+	/*
+	 * Writing the value 0x00000001 to Endianness register signals which
+	 * endianness this processor is using, so the FPGA can swap words as
+	 * necessary.
+	 */
+
+	iowrite32(1, endpoint->registers + fpga_endian_reg);
+
+	/* Bootstrap phase I: Allocate temporary message buffer */
+
+	bootstrap_resources = devres_open_group(dev, NULL, GFP_KERNEL);
+	if (!bootstrap_resources)
+		return -ENOMEM;
+
+	endpoint->num_channels = 0;
+
+	rc = xilly_setupchannels(endpoint, bogus_idt, 1);
+	if (rc)
+		return rc;
+
+	/* Clear the message subsystem (and counter in particular) */
+	iowrite32(0x04, endpoint->registers + fpga_msg_ctrl_reg);
+
+	endpoint->idtlen = -1;
+
+	/*
+	 * Set DMA 32/64 bit mode, quiesce the device (?!) and get IDT
+	 * buffer size.
+	 */
+	iowrite32((u32) (endpoint->dma_using_dac & 0x0001),
+		  endpoint->registers + fpga_dma_control_reg);
+
+	t = wait_event_interruptible_timeout(endpoint->ep_wait,
+					     (endpoint->idtlen >= 0),
+					     XILLY_TIMEOUT);
+	if (t <= 0) {
+		dev_err(endpoint->dev, "No response from FPGA. Aborting.\n");
+		return -ENODEV;
+	}
+
+	/* Enable DMA */
+	iowrite32((u32) (0x0002 | (endpoint->dma_using_dac & 0x0001)),
+		  endpoint->registers + fpga_dma_control_reg);
+
+	/* Bootstrap phase II: Allocate buffer for IDT and obtain it */
+	while (endpoint->idtlen >= idtbuffersize) {
+		idtbuffersize *= 2;
+		bogus_idt[6]++;
+	}
+
+	endpoint->num_channels = 1;
+
+	rc = xilly_setupchannels(endpoint, bogus_idt, 2);
+	if (rc)
+		goto failed_idt;
+
+	rc = xilly_obtain_idt(endpoint);
+	if (rc)
+		goto failed_idt;
+
+	rc = xilly_scan_idt(endpoint, &idt_handle);
+	if (rc)
+		goto failed_idt;
+
+	devres_close_group(dev, bootstrap_resources);
+
+	/* Bootstrap phase III: Allocate buffers according to IDT */
+
+	rc = xilly_setupchannels(endpoint,
+				 idt_handle.chandesc,
+				 idt_handle.entries);
+	if (rc)
+		goto failed_idt;
+
+	/*
+	 * endpoint is now completely configured. We put it on the list
+	 * available to open() before registering the char device(s)
+	 */
+
+	mutex_lock(&ep_list_lock);
+	list_add_tail(&endpoint->ep_list, &list_of_endpoints);
+	mutex_unlock(&ep_list_lock);
+
+	rc = xillybus_init_chrdev(endpoint, idt_handle.idt);
+	if (rc)
+		goto failed_chrdevs;
+
+	devres_release_group(dev, bootstrap_resources);
+
+	return 0;
+
+failed_chrdevs:
+	mutex_lock(&ep_list_lock);
+	list_del(&endpoint->ep_list);
+	mutex_unlock(&ep_list_lock);
+
+failed_idt:
+	xilly_quiesce(endpoint);
+	flush_workqueue(xillybus_wq);
+
+	return rc;
+}
+EXPORT_SYMBOL(xillybus_endpoint_discovery);
+
+void xillybus_endpoint_remove(struct xilly_endpoint *endpoint)
+{
+	xillybus_cleanup_chrdev(endpoint);
+
+	mutex_lock(&ep_list_lock);
+	list_del(&endpoint->ep_list);
+	mutex_unlock(&ep_list_lock);
+
+	xilly_quiesce(endpoint);
+
+	/*
+	 * Flushing is done upon endpoint release to prevent access to memory
+	 * just about to be released. This makes the quiesce complete.
+	 */
+	flush_workqueue(xillybus_wq);
+}
+EXPORT_SYMBOL(xillybus_endpoint_remove);
+
+static int __init xillybus_init(void)
+{
+	mutex_init(&ep_list_lock);
+
+	xillybus_class = class_create(THIS_MODULE, xillyname);
+	if (IS_ERR(xillybus_class))
+		return PTR_ERR(xillybus_class);
+
+	xillybus_wq = alloc_workqueue(xillyname, 0, 0);
+	if (!xillybus_wq) {
+		class_destroy(xillybus_class);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+static void __exit xillybus_exit(void)
+{
+	/* flush_workqueue() was called for each endpoint released */
+	destroy_workqueue(xillybus_wq);
+
+	class_destroy(xillybus_class);
+}
+
+module_init(xillybus_init);
+module_exit(xillybus_exit);
diff --git a/kernel/drivers/char/xillybus/xillybus_of.c b/kernel/drivers/char/xillybus/xillybus_of.c
new file mode 100644
index 000000000..781865084
--- /dev/null
+++ b/kernel/drivers/char/xillybus/xillybus_of.c
@@ -0,0 +1,186 @@
+/*
+ * linux/drivers/misc/xillybus_of.c
+ *
+ * Copyright 2011 Xillybus Ltd, http://xillybus.com
+ *
+ * Driver for the Xillybus FPGA/host framework using Open Firmware.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the smems of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#include <linux/err.h>
+#include "xillybus.h"
+
+MODULE_DESCRIPTION("Xillybus driver for Open Firmware");
+MODULE_AUTHOR("Eli Billauer, Xillybus Ltd.");
+MODULE_VERSION("1.06");
+MODULE_ALIAS("xillybus_of");
+MODULE_LICENSE("GPL v2");
+
+static const char xillyname[] = "xillybus_of";
+
+/* Match table for of_platform binding */
+static const struct of_device_id xillybus_of_match[] = {
+	{ .compatible = "xillybus,xillybus-1.00.a", },
+	{ .compatible = "xlnx,xillybus-1.00.a", }, /* Deprecated */
+	{}
+};
+
+MODULE_DEVICE_TABLE(of, xillybus_of_match);
+
+static void xilly_dma_sync_single_for_cpu_of(struct xilly_endpoint *ep,
+					     dma_addr_t dma_handle,
+					     size_t size,
+					     int direction)
+{
+	dma_sync_single_for_cpu(ep->dev, dma_handle, size, direction);
+}
+
+static void xilly_dma_sync_single_for_device_of(struct xilly_endpoint *ep,
+						dma_addr_t dma_handle,
+						size_t size,
+						int direction)
+{
+	dma_sync_single_for_device(ep->dev, dma_handle, size, direction);
+}
+
+static void xilly_dma_sync_single_nop(struct xilly_endpoint *ep,
+				      dma_addr_t dma_handle,
+				      size_t size,
+				      int direction)
+{
+}
+
+static void xilly_of_unmap(void *ptr)
+{
+	struct xilly_mapping *data = ptr;
+
+	dma_unmap_single(data->device, data->dma_addr,
+			 data->size, data->direction);
+
+	kfree(ptr);
+}
+
+static int xilly_map_single_of(struct xilly_endpoint *ep,
+			       void *ptr,
+			       size_t size,
+			       int direction,
+			       dma_addr_t *ret_dma_handle
+	)
+{
+	dma_addr_t addr;
+	struct xilly_mapping *this;
+	int rc;
+
+	this = kzalloc(sizeof(*this), GFP_KERNEL);
+	if (!this)
+		return -ENOMEM;
+
+	addr = dma_map_single(ep->dev, ptr, size, direction);
+
+	if (dma_mapping_error(ep->dev, addr)) {
+		kfree(this);
+		return -ENODEV;
+	}
+
+	this->device = ep->dev;
+	this->dma_addr = addr;
+	this->size = size;
+	this->direction = direction;
+
+	*ret_dma_handle = addr;
+
+	rc = devm_add_action(ep->dev, xilly_of_unmap, this);
+
+	if (rc) {
+		dma_unmap_single(ep->dev, addr, size, direction);
+		kfree(this);
+		return rc;
+	}
+
+	return 0;
+}
+
+static struct xilly_endpoint_hardware of_hw = {
+	.owner = THIS_MODULE,
+	.hw_sync_sgl_for_cpu = xilly_dma_sync_single_for_cpu_of,
+	.hw_sync_sgl_for_device = xilly_dma_sync_single_for_device_of,
+	.map_single = xilly_map_single_of,
+};
+
+static struct xilly_endpoint_hardware of_hw_coherent = {
+	.owner = THIS_MODULE,
+	.hw_sync_sgl_for_cpu = xilly_dma_sync_single_nop,
+	.hw_sync_sgl_for_device = xilly_dma_sync_single_nop,
+	.map_single = xilly_map_single_of,
+};
+
+static int xilly_drv_probe(struct platform_device *op)
+{
+	struct device *dev = &op->dev;
+	struct xilly_endpoint *endpoint;
+	int rc;
+	int irq;
+	struct resource res;
+	struct xilly_endpoint_hardware *ephw = &of_hw;
+
+	if (of_property_read_bool(dev->of_node, "dma-coherent"))
+		ephw = &of_hw_coherent;
+
+	endpoint = xillybus_init_endpoint(NULL, dev, ephw);
+
+	if (!endpoint)
+		return -ENOMEM;
+
+	dev_set_drvdata(dev, endpoint);
+
+	rc = of_address_to_resource(dev->of_node, 0, &res);
+	endpoint->registers = devm_ioremap_resource(dev, &res);
+
+	if (IS_ERR(endpoint->registers))
+		return PTR_ERR(endpoint->registers);
+
+	irq = irq_of_parse_and_map(dev->of_node, 0);
+
+	rc = devm_request_irq(dev, irq, xillybus_isr, 0, xillyname, endpoint);
+
+	if (rc) {
+		dev_err(endpoint->dev,
+			"Failed to register IRQ handler. Aborting.\n");
+		return -ENODEV;
+	}
+
+	return xillybus_endpoint_discovery(endpoint);
+}
+
+static int xilly_drv_remove(struct platform_device *op)
+{
+	struct device *dev = &op->dev;
+	struct xilly_endpoint *endpoint = dev_get_drvdata(dev);
+
+	xillybus_endpoint_remove(endpoint);
+
+	return 0;
+}
+
+static struct platform_driver xillybus_platform_driver = {
+	.probe = xilly_drv_probe,
+	.remove = xilly_drv_remove,
+	.driver = {
+		.name = xillyname,
+		.of_match_table = xillybus_of_match,
+	},
+};
+
+module_platform_driver(xillybus_platform_driver);
diff --git a/kernel/drivers/char/xillybus/xillybus_pcie.c b/kernel/drivers/char/xillybus/xillybus_pcie.c
new file mode 100644
index 000000000..d8266bc2a
--- /dev/null
+++ b/kernel/drivers/char/xillybus/xillybus_pcie.c
@@ -0,0 +1,228 @@
+/*
+ * linux/drivers/misc/xillybus_pcie.c
+ *
+ * Copyright 2011 Xillybus Ltd, http://xillybus.com
+ *
+ * Driver for the Xillybus FPGA/host framework using PCI Express.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the smems of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/pci-aspm.h>
+#include <linux/slab.h>
+#include "xillybus.h"
+
+MODULE_DESCRIPTION("Xillybus driver for PCIe");
+MODULE_AUTHOR("Eli Billauer, Xillybus Ltd.");
+MODULE_VERSION("1.06");
+MODULE_ALIAS("xillybus_pcie");
+MODULE_LICENSE("GPL v2");
+
+#define PCI_DEVICE_ID_XILLYBUS		0xebeb
+
+#define PCI_VENDOR_ID_ALTERA		0x1172
+#define PCI_VENDOR_ID_ACTEL		0x11aa
+#define PCI_VENDOR_ID_LATTICE		0x1204
+
+static const char xillyname[] = "xillybus_pcie";
+
+static const struct pci_device_id xillyids[] = {
+	{PCI_DEVICE(PCI_VENDOR_ID_XILINX, PCI_DEVICE_ID_XILLYBUS)},
+	{PCI_DEVICE(PCI_VENDOR_ID_ALTERA, PCI_DEVICE_ID_XILLYBUS)},
+	{PCI_DEVICE(PCI_VENDOR_ID_ACTEL, PCI_DEVICE_ID_XILLYBUS)},
+	{PCI_DEVICE(PCI_VENDOR_ID_LATTICE, PCI_DEVICE_ID_XILLYBUS)},
+	{ /* End: all zeroes */ }
+};
+
+static int xilly_pci_direction(int direction)
+{
+	switch (direction) {
+	case DMA_TO_DEVICE:
+		return PCI_DMA_TODEVICE;
+	case DMA_FROM_DEVICE:
+		return PCI_DMA_FROMDEVICE;
+	default:
+		return PCI_DMA_BIDIRECTIONAL;
+	}
+}
+
+static void xilly_dma_sync_single_for_cpu_pci(struct xilly_endpoint *ep,
+					      dma_addr_t dma_handle,
+					      size_t size,
+					      int direction)
+{
+	pci_dma_sync_single_for_cpu(ep->pdev,
+				    dma_handle,
+				    size,
+				    xilly_pci_direction(direction));
+}
+
+static void xilly_dma_sync_single_for_device_pci(struct xilly_endpoint *ep,
+						 dma_addr_t dma_handle,
+						 size_t size,
+						 int direction)
+{
+	pci_dma_sync_single_for_device(ep->pdev,
+				       dma_handle,
+				       size,
+				       xilly_pci_direction(direction));
+}
+
+static void xilly_pci_unmap(void *ptr)
+{
+	struct xilly_mapping *data = ptr;
+
+	pci_unmap_single(data->device, data->dma_addr,
+			 data->size, data->direction);
+
+	kfree(ptr);
+}
+
+/*
+ * Map either through the PCI DMA mapper or the non_PCI one. Behind the
+ * scenes exactly the same functions are called with the same parameters,
+ * but that can change.
+ */
+
+static int xilly_map_single_pci(struct xilly_endpoint *ep,
+				void *ptr,
+				size_t size,
+				int direction,
+				dma_addr_t *ret_dma_handle
+	)
+{
+	int pci_direction;
+	dma_addr_t addr;
+	struct xilly_mapping *this;
+	int rc;
+
+	this = kzalloc(sizeof(*this), GFP_KERNEL);
+	if (!this)
+		return -ENOMEM;
+
+	pci_direction = xilly_pci_direction(direction);
+
+	addr = pci_map_single(ep->pdev, ptr, size, pci_direction);
+
+	if (pci_dma_mapping_error(ep->pdev, addr)) {
+		kfree(this);
+		return -ENODEV;
+	}
+
+	this->device = ep->pdev;
+	this->dma_addr = addr;
+	this->size = size;
+	this->direction = pci_direction;
+
+	*ret_dma_handle = addr;
+
+	rc = devm_add_action(ep->dev, xilly_pci_unmap, this);
+	if (rc) {
+		pci_unmap_single(ep->pdev, addr, size, pci_direction);
+		kfree(this);
+		return rc;
+	}
+
+	return 0;
+}
+
+static struct xilly_endpoint_hardware pci_hw = {
+	.owner = THIS_MODULE,
+	.hw_sync_sgl_for_cpu = xilly_dma_sync_single_for_cpu_pci,
+	.hw_sync_sgl_for_device = xilly_dma_sync_single_for_device_pci,
+	.map_single = xilly_map_single_pci,
+};
+
+static int xilly_probe(struct pci_dev *pdev,
+		       const struct pci_device_id *ent)
+{
+	struct xilly_endpoint *endpoint;
+	int rc;
+
+	endpoint = xillybus_init_endpoint(pdev, &pdev->dev, &pci_hw);
+
+	if (!endpoint)
+		return -ENOMEM;
+
+	pci_set_drvdata(pdev, endpoint);
+
+	rc = pcim_enable_device(pdev);
+	if (rc) {
+		dev_err(endpoint->dev,
+			"pcim_enable_device() failed. Aborting.\n");
+		return rc;
+	}
+
+	/* L0s has caused packet drops. No power saving, thank you. */
+
+	pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S);
+
+	if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
+		dev_err(endpoint->dev,
+			"Incorrect BAR configuration. Aborting.\n");
+		return -ENODEV;
+	}
+
+	rc = pcim_iomap_regions(pdev, 0x01, xillyname);
+	if (rc) {
+		dev_err(endpoint->dev,
+			"pcim_iomap_regions() failed. Aborting.\n");
+		return rc;
+	}
+
+	endpoint->registers = pcim_iomap_table(pdev)[0];
+
+	pci_set_master(pdev);
+
+	/* Set up a single MSI interrupt */
+	if (pci_enable_msi(pdev)) {
+		dev_err(endpoint->dev,
+			"Failed to enable MSI interrupts. Aborting.\n");
+		return -ENODEV;
+	}
+	rc = devm_request_irq(&pdev->dev, pdev->irq, xillybus_isr, 0,
+			      xillyname, endpoint);
+	if (rc) {
+		dev_err(endpoint->dev,
+			"Failed to register MSI handler. Aborting.\n");
+		return -ENODEV;
+	}
+
+	/*
+	 * In theory, an attempt to set the DMA mask to 64 and dma_using_dac=1
+	 * is the right thing. But some unclever PCIe drivers report it's OK
+	 * when the hardware drops those 64-bit PCIe packets. So trust
+	 * nobody and use 32 bits DMA addressing in any case.
+	 */
+
+	if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
+		endpoint->dma_using_dac = 0;
+	} else {
+		dev_err(endpoint->dev, "Failed to set DMA mask. Aborting.\n");
+		return -ENODEV;
+	}
+
+	return xillybus_endpoint_discovery(endpoint);
+}
+
+static void xilly_remove(struct pci_dev *pdev)
+{
+	struct xilly_endpoint *endpoint = pci_get_drvdata(pdev);
+
+	xillybus_endpoint_remove(endpoint);
+}
+
+MODULE_DEVICE_TABLE(pci, xillyids);
+
+static struct pci_driver xillybus_driver = {
+	.name = xillyname,
+	.id_table = xillyids,
+	.probe = xilly_probe,
+	.remove = xilly_remove,
+};
+
+module_pci_driver(xillybus_driver);