Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

1 files changed, 139 insertions, 0 deletions

diff --git a/kernel/drivers/char/nsc_gpio.c b/kernel/drivers/char/nsc_gpio.c
new file mode 100644
index 000000000..b07b119ae
--- /dev/null
+++ b/kernel/drivers/char/nsc_gpio.c
@@ -0,0 +1,139 @@
+/* linux/drivers/char/nsc_gpio.c
+
+   National Semiconductor common GPIO device-file/VFS methods.
+   Allows a user space process to control the GPIO pins.
+
+   Copyright (c) 2001,2002 Christer Weinigel <wingel@nano-system.com>
+   Copyright (c) 2005      Jim Cromie <jim.cromie@gmail.com>
+*/
+
+#include <linux/fs.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/nsc_gpio.h>
+#include <linux/platform_device.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+
+#define NAME "nsc_gpio"
+
+void nsc_gpio_dump(struct nsc_gpio_ops *amp, unsigned index)
+{
+	/* retrieve current config w/o changing it */
+	u32 config = amp->gpio_config(index, ~0, 0);
+
+	/* user requested via 'v' command, so its INFO */
+	dev_info(amp->dev, "io%02u: 0x%04x %s %s %s %s %s %s %s\tio:%d/%d\n",
+		 index, config,
+		 (config & 1) ? "OE" : "TS",      /* output-enabled/tristate */
+		 (config & 2) ? "PP" : "OD",      /* push pull / open drain */
+		 (config & 4) ? "PUE" : "PUD",    /* pull up enabled/disabled */
+		 (config & 8) ? "LOCKED" : "",    /* locked / unlocked */
+		 (config & 16) ? "LEVEL" : "EDGE",/* level/edge input */
+		 (config & 32) ? "HI" : "LO",     /* trigger on rise/fall edge */
+		 (config & 64) ? "DEBOUNCE" : "", /* debounce */
+
+		 amp->gpio_get(index), amp->gpio_current(index));
+}
+
+ssize_t nsc_gpio_write(struct file *file, const char __user *data,
+		       size_t len, loff_t *ppos)
+{
+	unsigned m = iminor(file_inode(file));
+	struct nsc_gpio_ops *amp = file->private_data;
+	struct device *dev = amp->dev;
+	size_t i;
+	int err = 0;
+
+	for (i = 0; i < len; ++i) {
+		char c;
+		if (get_user(c, data + i))
+			return -EFAULT;
+		switch (c) {
+		case '0':
+			amp->gpio_set(m, 0);
+			break;
+		case '1':
+			amp->gpio_set(m, 1);
+			break;
+		case 'O':
+			dev_dbg(dev, "GPIO%d output enabled\n", m);
+			amp->gpio_config(m, ~1, 1);
+			break;
+		case 'o':
+			dev_dbg(dev, "GPIO%d output disabled\n", m);
+			amp->gpio_config(m, ~1, 0);
+			break;
+		case 'T':
+			dev_dbg(dev, "GPIO%d output is push pull\n", m);
+			amp->gpio_config(m, ~2, 2);
+			break;
+		case 't':
+			dev_dbg(dev, "GPIO%d output is open drain\n", m);
+			amp->gpio_config(m, ~2, 0);
+			break;
+		case 'P':
+			dev_dbg(dev, "GPIO%d pull up enabled\n", m);
+			amp->gpio_config(m, ~4, 4);
+			break;
+		case 'p':
+			dev_dbg(dev, "GPIO%d pull up disabled\n", m);
+			amp->gpio_config(m, ~4, 0);
+			break;
+		case 'v':
+			/* View Current pin settings */
+			amp->gpio_dump(amp, m);
+			break;
+		case '\n':
+			/* end of settings string, do nothing */
+			break;
+		default:
+			dev_err(dev, "io%2d bad setting: chr<0x%2x>\n",
+				m, (int)c);
+			err++;
+		}
+	}
+	if (err)
+		return -EINVAL;	/* full string handled, report error */
+
+	return len;
+}
+
+ssize_t nsc_gpio_read(struct file *file, char __user * buf,
+		      size_t len, loff_t * ppos)
+{
+	unsigned m = iminor(file_inode(file));
+	int value;
+	struct nsc_gpio_ops *amp = file->private_data;
+
+	value = amp->gpio_get(m);
+	if (put_user(value ? '1' : '0', buf))
+		return -EFAULT;
+
+	return 1;
+}
+
+/* common file-ops routines for both scx200_gpio and pc87360_gpio */
+EXPORT_SYMBOL(nsc_gpio_write);
+EXPORT_SYMBOL(nsc_gpio_read);
+EXPORT_SYMBOL(nsc_gpio_dump);
+
+static int __init nsc_gpio_init(void)
+{
+	printk(KERN_DEBUG NAME " initializing\n");
+	return 0;
+}
+
+static void __exit nsc_gpio_cleanup(void)
+{
+	printk(KERN_DEBUG NAME " cleanup\n");
+}
+
+module_init(nsc_gpio_init);
+module_exit(nsc_gpio_cleanup);
+
+MODULE_AUTHOR("Jim Cromie <jim.cromie@gmail.com>");
+MODULE_DESCRIPTION("NatSemi GPIO Common Methods");
+MODULE_LICENSE("GPL");